pit

package
v1.32.7 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 11, 2024 License: MIT Imports: 13 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

View Source 
var Bond0ConfigTemplate = []byte(`
NAME='Internal Interface'# Select the NIC(s) for access to the CRAY.

# Select the NIC(s) for access.
BONDING_SLAVE0='{{.Bond0}}'
BONDING_SLAVE1='{{.Bond1}}'

# Set static IP (becomes "preferred" if dhcp is enabled)
BOOTPROTO='static'
IPADDR='{{.CIDR}}'    # i.e. '192.168.64.1/20'
PREFIXLEN='{{.Mask}}' # i.e. '20'

# CHANGE AT OWN RISK:
BONDING_MODULE_OPTS='mode=802.3ad miimon=100 lacp_rate=fast xmit_hash_policy=layer2+3'# DO NOT CHANGE THESE:

# DO NOT CHANGE THESE:
ONBOOT='yes'
STARTMODE='manual'
BONDING_MASTER='yes'
`)

Bond0ConfigTemplate is the text/template for setting up the bond on the install NCN

View Source 
var CANConfigTemplate = []byte(`
# CAN:
server=/can/
address=/can/
dhcp-option=interface:bond0.can0,option:domain-search,can
interface-name=pit.can,bond0.can0
interface=bond0.can0
cname=packages.can,pit.can
cname=registry.can,pit.can
dhcp-option=interface:bond0.can0,option:router,{{.Gateway}}
dhcp-range=interface:bond0.can0,{{.DHCPStart}},{{.DHCPEnd}},10m
`)

CANConfigTemplate manages the CAN portion of the DNSMasq configuration

View Source 
var CMNConfigTemplate = []byte(`
# CMN:
server=/cmn/
address=/cmn/
dhcp-option=interface:bond0.cmn0,option:domain-search,cmn
interface-name=pit.cmn,bond0.cmn0
interface=bond0.cmn0
cname=packages.cmn,pit.cmn
cname=registry.cmn,pit.cmn
dhcp-option=interface:bond0.cmn0,option:router,{{.Gateway}}
dhcp-range=interface:bond0.cmn0,{{.DHCPStart}},{{.DHCPEnd}},10m
`)

CMNConfigTemplate manages the CAN portion of the DNSMasq configuration

View Source 
var ConmanConfigTemplate = []byte(` 
SERVER keepalive=ON
SERVER logdir="/var/log/conman"
SERVER logfile="conman.log"
SERVER loopback=ON
SERVER pidfile="/var/run/conman/conman.pid"
SERVER resetcmd="powerman -0 %N; sleep 3; powerman -1 %N"
SERVER timestamp=1h
GLOBAL seropts="115200,8n1"
GLOBAL log="console.%N"
GLOBAL logopts="sanitize,timestamp"
{{range .}}
console name="{{.Hostname}}-mgmt"     dev="ipmi:{{.IP}}" ipmiopts="U:{{.User}},P:{{.Pass}},W:solpayloadsize"
{{- end}}
`)

ConmanConfigTemplate manages the Conman Configuration

View Source 
var HMNConfigTemplate = []byte(`
# HMN:
server=/hmn/
address=/hmn/
domain=hmn,{{.CIDR.IP}},{{.DHCPEnd}},local
interface-name=pit.hmn,bond0.hmn0
dhcp-option=interface:bond0.hmn0,option:domain-search,hmn
interface=bond0.hmn0
cname=packages.hmn,pit.hmn
cname=registry.hmn,pit.hmn
# This needs to point to the liveCD IP for provisioning in bare-metal environments.
dhcp-option=interface:bond0.hmn0,option:dns-server,{{.PITServer}}
dhcp-option=interface:bond0.hmn0,option:ntp-server,{{.PITServer}}
dhcp-option=interface:bond0.hmn0,option:router,{{.Gateway}}
dhcp-range=interface:bond0.hmn0,{{.DHCPStart}},{{.DHCPEnd}},10m
`)

HMNConfigTemplate manages the HMN portion of the DNSMasq configuration typically bond0.hmn0

View Source 
var Lan0ConfigTemplate = []byte(`
NAME='External Site-Link'

# Select the NIC(s) for direct, external access.
BRIDGE_PORTS='{{.Nic}}'

# Set static IP (becomes "preferred" if dhcp is enabled)
# NOTE: IPADDR's route will override DHCPs.
BOOTPROTO='static'
IPADDR='{{.IP}}'    # i.e. 10.100.10.1/24
PREFIXLEN='{{.IPPrefix}}' # i.e. 24

# DO NOT CHANGE THESE:
ONBOOT='yes'
STARTMODE='auto'
BRIDGE='yes'
BRIDGE_STP='no'
`)

Lan0ConfigTemplate is the text/template for handling the external site link

View Source 
var MTLConfigTemplate = []byte(`
# MTL:
server=/mtl/
address=/mtl/
domain=mtl,{{.CIDR.IP}},{{.DHCPEnd}},local
dhcp-option=interface:bond0,option:domain-search,mtl
interface=bond0
interface-name=pit.mtl,bond0
cname=packages.local,pit.mtl
cname=packages.mtl,pit.mtl
cname=registry.mtl,pit.mtl
# This needs to point to the liveCD IP for provisioning in bare-metal environments.
dhcp-option=interface:bond0,option:dns-server,{{.PITServer}}
dhcp-option=interface:bond0,option:ntp-server,{{.PITServer}}
# This must point at the router for the network; the L3/IP for the VLAN.
dhcp-option=interface:bond0,option:router,{{.Gateway}}
dhcp-range=interface:bond0,{{.DHCPStart}},{{.DHCPEnd}},10m
`)

MTLConfigTemplate manages the MTL portion of the DNSMasq configuration

View Source 
var MetalLBConfigMapTemplate = []byte(`
---
apiVersion: v1
kind: ConfigMap
metadata:
  namespace: metallb-system
  name: config
data:
  config: |
    peers:{{range .PeerSwitches}}
    - peer-address: {{ .IPAddress }}
      peer-asn: {{ .PeerASN }}
      my-asn: {{ .MyASN }}
      {{- end}}
    address-pools:{{range .Networks}}
    - name: {{ .Name}}
      protocol: {{ .Protocol }}
      addresses: {{range $subnet := .Addresses}}
      - {{ $subnet }}
      {{- end}}
    {{- end}}
`)

MetalLBConfigMapTemplate manages the ConfigMap for MetalLB

View Source 
var NMNConfigTemplate = []byte(`
# NMN:
server=/nmn/
address=/nmn/
interface-name=pit.nmn,bond0.nmn0
domain=nmn,{{.CIDR.IP}},{{.DHCPEnd}},local
dhcp-option=interface:bond0.nmn0,option:domain-search,nmn
interface=bond0.nmn0
cname=packages.nmn,pit.nmn
cname=registry.nmn,pit.nmn
# This needs to point to the liveCD IP for provisioning in bare-metal environments.
dhcp-option=interface:bond0.nmn0,option:dns-server,{{.PITServer}}
dhcp-option=interface:bond0.nmn0,option:ntp-server,{{.PITServer}}
dhcp-option=interface:bond0.nmn0,option:router,{{.Gateway}}
dhcp-range=interface:bond0.nmn0,{{.DHCPStart}},{{.DHCPEnd}},10m
`)

NMNConfigTemplate manages the NMN portion of the DNSMasq configuration

View Source 
var StaticConfigTemplate = []byte(`
# Static Configurations
{{range .NCNS}}
# DHCP Entries for {{.Hostname}}
dhcp-host=id:{{.Xname}},set:{{.Hostname}},{{.Bond0Mac0}},{{.Bond0Mac1}},{{.MtlIP}},{{.Hostname}},20m # MTL
dhcp-host=id:{{.Xname}},set:{{.Hostname}},{{.Bond0Mac0}},{{.Bond0Mac1}},{{.NmnIP}},{{.Hostname}},20m # Bond0 Mac0/Mac1
dhcp-host=id:{{.Xname}},set:{{.Hostname}},{{.Bond0Mac0}},{{.Bond0Mac1}},{{.HmnIP}},{{.Hostname}},20m # HMN
dhcp-host=id:{{.Xname}},set:{{.Hostname}},{{.Bond0Mac0}},{{.Bond0Mac1}},{{.CanIP}},{{.Hostname}},20m # CAN
dhcp-host={{.BmcMac}},{{.BmcIP}},{{.Hostname}}-mgmt,20m #HMN
# Host Record Entries for {{.Hostname}}
host-record={{.Hostname}},{{.Hostname}}.can,{{.CanIP}}
host-record={{.Hostname}},{{.Hostname}}.hmn,{{.HmnIP}}
host-record={{.Hostname}},{{.Hostname}}.nmn,{{.NmnIP}}
host-record={{.Hostname}},{{.Hostname}}.mtl,{{.MtlIP}}
host-record={{.Xname}},{{.Hostname}}.nmn,{{.NmnIP}}
host-record={{.Hostname}}-mgmt,{{.Hostname}}-mgmt.hmn,{{.BmcIP}}
# Override root-path with {{.Hostname}}'s xname
dhcp-option-force=tag:{{.Hostname}},17,{{.Xname}}
{{end}}
# Virtual IP Addresses for k8s and the rados gateway
host-record=kubeapi-vip,kubeapi-vip.nmn,{{.KUBEVIP}} # k8s-virtual-ip
host-record=rgw-vip,rgw-vip.nmn,{{.RGWVIP}} # rgw-virtual-ip
host-record={{.APIGWALIASES}},{{.APIGWIP}} # api gateway

cname=kubernetes-api.vshasta.io,ncn-m001
`)

StaticConfigTemplate manages the static portion of the DNSMasq configuration Systems with onboard NICs will have a MTL MAC. Others will also use the NMN

View Source 
var StaticConfigTemplateCHN = []byte(`
# Static Configurations
{{range .NCNS}}
# DHCP Entries for {{.Hostname}}
dhcp-host=id:{{.Xname}},set:{{.Hostname}},{{.Bond0Mac0}},{{.Bond0Mac1}},{{.MtlIP}},{{.Hostname}},20m # MTL
dhcp-host=id:{{.Xname}},set:{{.Hostname}},{{.Bond0Mac0}},{{.Bond0Mac1}},{{.NmnIP}},{{.Hostname}},20m # Bond0 Mac0/Mac1
dhcp-host=id:{{.Xname}},set:{{.Hostname}},{{.Bond0Mac0}},{{.Bond0Mac1}},{{.HmnIP}},{{.Hostname}},20m # HMN
dhcp-host={{.BmcMac}},{{.BmcIP}},{{.Hostname}}-mgmt,20m #HMN
# Host Record Entries for {{.Hostname}}
host-record={{.Hostname}},{{.Hostname}}.hmn,{{.HmnIP}}
host-record={{.Hostname}},{{.Hostname}}.nmn,{{.NmnIP}}
host-record={{.Hostname}},{{.Hostname}}.mtl,{{.MtlIP}}
host-record={{.Xname}},{{.Hostname}}.nmn,{{.NmnIP}}
host-record={{.Hostname}}-mgmt,{{.Hostname}}-mgmt.hmn,{{.BmcIP}}
# Override root-path with {{.Hostname}}'s xname
dhcp-option-force=tag:{{.Hostname}},17,{{.Xname}}
{{end}}
# Virtual IP Addresses for k8s and the rados gateway
host-record=kubeapi-vip,kubeapi-vip.nmn,{{.KUBEVIP}} # k8s-virtual-ip
host-record=rgw-vip,rgw-vip.nmn,{{.RGWVIP}} # rgw-virtual-ip
host-record={{.APIGWALIASES}},{{.APIGWIP}} # api gateway

cname=kubernetes-api.vshasta.io,ncn-m001
`)

StaticConfigTemplateCHN defines the DNSMasq configuration for a node if a system is configured to use CHN and there is no CAN network.

View Source 
var VlanConfigTemplate = []byte(`
NAME='{{.FullName}}'

# Set static IP (becomes "preferred" if dhcp is enabled)
BOOTPROTO='static'
IPADDR='{{.CIDR}}'    # i.e. '192.168.80.1/20'
PREFIXLEN='{{.Mask}}' # i.e. '20'

# CHANGE AT OWN RISK:
ETHERDEVICE='bond0'

# DO NOT CHANGE THESE:
VLAN_PROTOCOL='ieee802-1Q'
VLAN='yes'
VLAN_ID={{.Vlan}}
ONBOOT='yes'
STARTMODE='auto'
`)

VlanConfigTemplate is the text/template to bootstrap the install cd

View Source 
var VlanRouteTemplate = []byte(`
{{- range . -}}
{{.CIDR}} {{.Gateway}} {{.Mask}} -
{{ end -}}
`)

VlanRouteTemplate allows us to add static routes to the vlan(s) on the PIT node

Functions

func MakeBaseCampfromNCNs 

func MakeBaseCampfromNCNs(v *viper.Viper, ncns []csi.LogicalNCN, shastaNetworks map[string]*csi.IPV4Network) (map[string]CloudInit, error)

MakeBaseCampfromNCNs uses ncns and networks to create the basecamp config

func MakeBasecampGlobals 

func MakeBasecampGlobals(v *viper.Viper, logicalNcns []csi.LogicalNCN, shastaNetworks map[string]*csi.IPV4Network, installNetwork string, installSubnet string, installNCN string) (map[string]interface{}, error)

MakeBasecampGlobals uses the defaults above to create a suitable k/v pairing for the Globals in data.json for basecamp

func MakeBasecampHostRecords 

func MakeBasecampHostRecords(ncns []csi.LogicalNCN, shastaNetworks map[string]*csi.IPV4Network, installNCN string) interface{}

MakeBasecampHostRecords uses the ncns to generate a list of host ips and their names for use in /etc/hosts

func WriteBasecampData 

func WriteBasecampData(path string, ncns []csi.LogicalNCN, shastaNetworks map[string]*csi.IPV4Network, globals interface{})

WriteBasecampData writes basecamp data.json for the installer

func WriteCPTNetworkConfig 

func WriteCPTNetworkConfig(path string, v *viper.Viper, ncn csi.LogicalNCN, shastaNetworks map[string]*csi.IPV4Network) error

WriteCPTNetworkConfig writes the Network Configuration details for the installation node (PIT)

func WriteConmanConfig 

func WriteConmanConfig(path string, ncns []csi.LogicalNCN)

WriteConmanConfig provides conman configuration for the installer

func WriteDNSMasqConfig 

func WriteDNSMasqConfig(path string, v *viper.Viper, bootstrap []csi.LogicalNCN, networks map[string]*csi.IPV4Network)

WriteDNSMasqConfig writes the dnsmasq configuration files necssary for installation

func WriteMetalLBConfigMap 

func WriteMetalLBConfigMap(path string, v *viper.Viper, networks map[string]*csi.IPV4Network, switches []*csi.ManagementSwitch)

WriteMetalLBConfigMap creates the yaml configmap

Types

type AddressPoolDetail added in v1.9.13 

type AddressPoolDetail struct {
	Name      string   `yaml:"name" valid:"_,required"`
	Protocol  string   `yaml:"protocol" valid:"_,required"`
	Addresses []string `yaml:"addresses" valid:"required"`
}

AddressPoolDetail holds information about each of the MetalLB address pools

type BaseCampGlobals 

type BaseCampGlobals struct {

	// CEPH Installation Globals
	CephFSImage          string `json:"ceph-cephfs-image"`
	CephRBDImage         string `json:"ceph-rbd-image"`
	CephStorageNodeCount string `json:"ceph-num-storage-nodes"` // "3"
	CephRGWVip           string `json:"rgw-virtual-ip"`
	CephWipe             bool   `json:"wipe-ceph-osds"`

	// Not sure what consumes this.
	// Are we sure we want to reference something outside the cluster for this?
	ImageRegistry string `json:"docker-image-registry"` // dtr.dev.cray.com"

	// Commenting out several that I think we don't need
	// Domain string `json:domain`        // dnsmasq should provide this
	DNSServer string `json:"dns-server"`

	// Kubernetes Installation Globals
	KubernetesVIP              string `json:"kubernetes-virtual-ip"`
	KubernetesMaxPods          string `json:"kubernetes-max-pods-per-node"`
	KubernetesPodCIDR          string `json:"kubernetes-pods-cidr"`          // "10.32.0.0/12"
	KubernetesServicesCIDR     string `json:"kubernetes-services-cidr"`      // "10.16.0.0/12"
	KubernetesWeaveMTU         string `json:"kubernetes-weave-mtu"`          // 1376
	KubernetesCiliumOpReplicas string `json:"cilium-operator-replicas"`      // 1
	KubernetesPrimaryCNI       string `json:"k8s-primary-cni"`               // weave
	KubernetesKubeProxyReplace string `json:"cilium-kube-proxy-replacement"` // disabled

	NumStorageNodes int `json:"num_storage_nodes"`
}

BaseCampGlobals is the set of information needed for an install to reach the handoff point.

type BasecampHostRecord 

type BasecampHostRecord struct {
	IP      string   `json:"ip"`
	Aliases []string `json:"aliases"`
}

BasecampHostRecord is what we need for passing stuff to /etc/hosts

type CloudInit 

type CloudInit struct {
	MetaData MetaData               `yaml:"meta-data" json:"meta-data"`
	UserData map[string]interface{} `yaml:"user-data" json:"user-data"`
}

CloudInit is the main cloud-init struct. Leave the meta-data, user-data, and phone home info as generic interfaces as the user defines how much info exists in it.

type CustomizationsNetworking 

type CustomizationsNetworking struct {
	NMN          string `yaml:"nmn" valid:"cidr,required"`
	NMNLB        string `yaml:"nmn_load_balancers" valid:"cidr,required"`
	HMN          string `yaml:"hmn" valid:"cidr,required"`
	HMNLB        string `yaml:"hmn_load_balancers" valid:"cidr,required"`
	HSN          string `yaml:"high_speed" valid:"cidr,required"`
	NetStaticIps struct {
		SiteToSystem       net.IP   `yaml:"site_to_system_lookups" valid:"ipv4,required"`
		SystemToSite       net.IP   `yaml:"system_to_site_lookups" valid:"ipv4,required"`
		NmnTftp            net.IP   `yaml:"nmn_tftp" valid:"ipv4,required"`
		HmnTftp            net.IP   `yaml:"hmn_tftp" valid:"ipv4,required"`
		NmnAPIGateway      net.IP   `yaml:"nmn_api_gw" valid:"ipv4,required"`
		NmnUnbound         net.IP   `yaml:"nmn_unbound" valid:"ipv4,required"`
		NmnAPIGatewayLocal net.IP   `yaml:"nmn_api_gw_local" valid:"ipv4,required"`
		HmnAPIGateway      net.IP   `yaml:"hmn_api_gw" valid:"ipv4,required"`
		NcnMasters         []net.IP `yaml:"nmn_ncn_masters" valid:"required"`
		NcnStorage         []net.IP `yaml:"nmn_ncn_storage" valid:"required"`
		NcnStorageMons     []net.IP `yaml:"nmn_ncn_storage_mons" valid:"required"`
	}
	DNS struct {
		ExternalDomain    string `yaml:"external" valid:"host,required"`
		ExternalS3        string `yaml:"external_s3" valid:"required,host"`
		ExternalAuth      string `yaml:"external_auth" valid:"required,host"`
		ExternalAPI       string `yaml:"external_api" valid:"required,host"`
		InternalS3        string `yaml:"internal_s3" valid:"required,host"`
		InternalAPI       string `yaml:"internal_api" valid:"required,host"`
		PrimaryServerName string `yaml:"primary_server_name" valid:"required,host"`
		SecondaryServers  string `yaml:"secondary_servers" valid:"required,host"`
		NotifyZones       string `yaml:"notify_zones" valid:"required,host"`
	}
	MetalLB struct {
		Peers        []PeerDetail        `yaml:"peers"`
		AddressPools []AddressPoolDetail `yaml:"address-pools"`
	}
}

CustomizationsNetworking is the struct for holding all Networking related variables for use in customizations.yaml

type CustomizationsWLM 

type CustomizationsWLM struct {
	WLMStaticIPs struct {
		SlurmCtlD net.IP `` /* 131-byte string literal not displayed */
		SlurmDbd  net.IP `` /* 129-byte string literal not displayed */
		Pbs       net.IP `yaml:"pbs" valid:"ipv4,required" desc:"The PBS IP address on the nmn, accessible from all UAIs,UANs, and Compute Nodes"`
		PbsComm   net.IP `` /* 129-byte string literal not displayed */
	}
	MacVlanSetup struct {
		NMNSubnetCIDR              string `yaml:"nmn_subnet" valid:"cidr,required"`
		NMNSupernetCIDR            string `yaml:"nmn_supernet" valid:"cidr,required"`
		NMNSupernetGateway         net.IP `yaml:"nmn_supernet_gateway" valid:"ipv4,required"`
		NMNVlanInterface           string `yaml:"nmn_vlan" valid:"_,required"`
		NMNMacVlanReservationStart net.IP `yaml:"nmn_reservation_start" valid:"ipv4,required"`
		NMNMacVlanReservationEnd   net.IP `yaml:"nmn_reservation_end" valid:"ipv4,required"`
		Routes                     []struct {
			Destination string `yaml:"dst" valid:"cidr,required"`
			Gateway     string `yaml:"gw" valid:"cidr,required"`
		}
	}
}

CustomizationsWLM is the struct for holding all WLM related values for customizations.yaml

type CustomizationsYaml 

type CustomizationsYaml struct {
	Networking CustomizationsNetworking `yaml:"network"`
	WLM        CustomizationsWLM        `yaml:"wlm"`
}

CustomizationsYaml is the golang representation of the customizations.yaml stanza we generate

func GenCustomizationsYaml 

func GenCustomizationsYaml(ncns []csi.LogicalNCN, shastaNetworks map[string]*csi.IPV4Network, switches []*csi.ManagementSwitch) CustomizationsYaml

GenCustomizationsYaml generates our configurations.yaml nested struct

func (*CustomizationsYaml) IsValid 

func (c *CustomizationsYaml) IsValid() bool

IsValid uses govalidator and struct tags to validate and returns a boolean

func (*CustomizationsYaml) ValidationErrors 

func (c *CustomizationsYaml) ValidationErrors() error

ValidationErrors uses govalidator and struct tags to validate and returns errors

type DNSMasqBootstrapNetwork 

type DNSMasqBootstrapNetwork struct {
	Subnet    csi.IPV4Subnet
	Interface string
}

DNSMasqBootstrapNetwork holds information for configuring DNSMasq on the LiveCD

type MetaData 

type MetaData struct {
	Hostname         string                 `yaml:"local-hostname" json:"local-hostname"`       // should be local hostname e.g. ncn-m003
	Xname            string                 `yaml:"xname" json:"xname"`                         // should be xname e.g. x3000c0s1b0n0
	InstanceID       string                 `yaml:"instance-id" json:"instance-id"`             // should be unique for the life of the image
	Region           string                 `yaml:"region" json:"region"`                       // unused currently
	AvailabilityZone string                 `yaml:"availability-zone" json:"availability-zone"` // unused currently
	ShastaRole       string                 `yaml:"shasta-role" json:"shasta-role"`             // map to HSM role
	IPAM             map[string]interface{} `yaml:"ipam" json:"ipam"`
}

MetaData is part of the cloud-init structure and is only used for validating the required fields in the `CloudInit` struct below.

type MetalLBConfigMap 

type MetalLBConfigMap struct {
	LeafSwitches  []PeerDetail
	PeerSwitches  []PeerDetail
	SpineSwitches []PeerDetail
	EdgeSwitches  []PeerDetail
	Networks      []AddressPoolDetail
}

MetalLBConfigMap holds information needed by the MetalLBConfigMapTemplate

func GetMetalLBConfig added in v1.9.13 

func GetMetalLBConfig(v *viper.Viper, networks map[string]*csi.IPV4Network, switches []*csi.ManagementSwitch) MetalLBConfigMap

GetMetalLBConfig gathers the information for the metallb config map

type NtpConfig 

type NtpConfig struct {
	ConfPath string `json:"confpath"`
	Template string `json:"template"`
}

NtpConfig is the options for the cloud-init ntp module. this is mainly the template that gets deployed to the NCNs

type NtpModule 

type NtpModule struct {
	Enabled    bool      `json:"enabled"`
	NtpClient  string    `json:"ntp_client"`
	NTPPeers   []string  `json:"peers"`
	NTPAllow   []string  `json:"allow"`
	NTPServers []string  `json:"servers"`
	NTPPools   []string  `json:"pools,omitempty"`
	Config     NtpConfig `json:"config"`
}

NtpModule enables use of the cloud-init ntp module

type PasswordCredential 

type PasswordCredential struct {
	Username   string `form:"username" json:"username"`
	Password   string `form:"password" json:"password"`
	ServiceURL string `form:"service_url" json:"service_url" binding:"omitempty"`
}

PasswordCredential is a struct for holding username/password credentials

type PeerDetail added in v1.9.9 

type PeerDetail struct {
	IPAddress string `yaml:"peer-address" valid:"_,required"`
	PeerASN   int    `yaml:"peer-asn" valid:"_,required"`
	MyASN     int    `yaml:"my-asn" valid:"_,required"`
}

PeerDetail holds information about each of the BGP routers that we peer with in MetalLB

type WriteFiles 

type WriteFiles struct {
	Content     string `json:"content"`
	Owner       string `json:"owner"`
	Path        string `json:"path"`
	Permissions string `json:"permissions"`
}

WriteFiles enables use of the cloud-init write_files module

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.