one_wire_bricklet

package
Version: v0.0.0-...-57cfa29 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Aug 22, 2022 License: CC0-1.0 Imports: 5 Imported by: 0

Documentation

Overview

Communicates with up 64 1-Wire devices.

See also the documentation here: https://www.tinkerforge.com/en/doc/Software/Bricklets/OneWire_Bricklet_Go.html.

Index

Constants

View Source 
const DeviceDisplayName = "One Wire Bricklet"
View Source 
const DeviceIdentifier = 2123

Variables

This section is empty.

Functions

This section is empty.

Types

type BootloaderMode 

type BootloaderMode = uint8
const (
	BootloaderModeBootloader                    BootloaderMode = 0
	BootloaderModeFirmware                      BootloaderMode = 1
	BootloaderModeBootloaderWaitForReboot       BootloaderMode = 2
	BootloaderModeFirmwareWaitForReboot         BootloaderMode = 3
	BootloaderModeFirmwareWaitForEraseAndReboot BootloaderMode = 4
)

type BootloaderStatus 

type BootloaderStatus = uint8
const (
	BootloaderStatusOK                        BootloaderStatus = 0
	BootloaderStatusInvalidMode               BootloaderStatus = 1
	BootloaderStatusNoChange                  BootloaderStatus = 2
	BootloaderStatusEntryFunctionNotPresent   BootloaderStatus = 3
	BootloaderStatusDeviceIdentifierIncorrect BootloaderStatus = 4
	BootloaderStatusCRCMismatch               BootloaderStatus = 5
)

type CommunicationLEDConfig 

type CommunicationLEDConfig = uint8
const (
	CommunicationLEDConfigOff               CommunicationLEDConfig = 0
	CommunicationLEDConfigOn                CommunicationLEDConfig = 1
	CommunicationLEDConfigShowHeartbeat     CommunicationLEDConfig = 2
	CommunicationLEDConfigShowCommunication CommunicationLEDConfig = 3
)

type Function 

type Function = uint8
const (
	FunctionSearchBusLowLevel         Function = 1
	FunctionResetBus                  Function = 2
	FunctionWrite                     Function = 3
	FunctionRead                      Function = 4
	FunctionWriteCommand              Function = 5
	FunctionSetCommunicationLEDConfig Function = 6
	FunctionGetCommunicationLEDConfig Function = 7
	FunctionGetSPITFPErrorCount       Function = 234
	FunctionSetBootloaderMode         Function = 235
	FunctionGetBootloaderMode         Function = 236
	FunctionSetWriteFirmwarePointer   Function = 237
	FunctionWriteFirmware             Function = 238
	FunctionSetStatusLEDConfig        Function = 239
	FunctionGetStatusLEDConfig        Function = 240
	FunctionGetChipTemperature        Function = 242
	FunctionReset                     Function = 243
	FunctionWriteUID                  Function = 248
	FunctionReadUID                   Function = 249
	FunctionGetIdentity               Function = 255
)

type OneWireBricklet 

type OneWireBricklet struct {
	// contains filtered or unexported fields
}

func New 

func New(uid string, ipcon *ipconnection.IPConnection) (OneWireBricklet, error)

Creates an object with the unique device ID `uid`. This object can then be used after the IP Connection `ipcon` is connected.

func (*OneWireBricklet) GetAPIVersion 

func (device *OneWireBricklet) GetAPIVersion() [3]uint8

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

func (*OneWireBricklet) GetBootloaderMode 

func (device *OneWireBricklet) GetBootloaderMode() (mode BootloaderMode, err error)

Returns the current bootloader mode, see SetBootloaderMode.

Associated constants:

  • BootloaderModeBootloader
  • BootloaderModeFirmware
  • BootloaderModeBootloaderWaitForReboot
  • BootloaderModeFirmwareWaitForReboot
  • BootloaderModeFirmwareWaitForEraseAndReboot

func (*OneWireBricklet) GetChipTemperature 

func (device *OneWireBricklet) GetChipTemperature() (temperature int16, err error)

Returns the temperature as measured inside the microcontroller. The value returned is not the ambient temperature!

The temperature is only proportional to the real temperature and it has bad accuracy. Practically it is only useful as an indicator for temperature changes.

func (*OneWireBricklet) GetCommunicationLEDConfig 

func (device *OneWireBricklet) GetCommunicationLEDConfig() (config CommunicationLEDConfig, err error)

Returns the configuration as set by SetCommunicationLEDConfig

Associated constants:

  • CommunicationLEDConfigOff
  • CommunicationLEDConfigOn
  • CommunicationLEDConfigShowHeartbeat
  • CommunicationLEDConfigShowCommunication

func (*OneWireBricklet) GetIdentity 

func (device *OneWireBricklet) GetIdentity() (uid string, connectedUid string, position rune, hardwareVersion [3]uint8, firmwareVersion [3]uint8, deviceIdentifier uint16, err error)

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an `Isolator Bricklet <isolator_bricklet>` is always at position 'z'.

The device identifier numbers can be found `here <device_identifier>`. |device_identifier_constant|

func (*OneWireBricklet) GetResponseExpected 

func (device *OneWireBricklet) GetResponseExpected(functionID Function) (bool, error)

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by SetResponseExpected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

See SetResponseExpected for the list of function ID constants available for this function.

func (*OneWireBricklet) GetSPITFPErrorCount 

func (device *OneWireBricklet) GetSPITFPErrorCount() (errorCountAckChecksum uint32, errorCountMessageChecksum uint32, errorCountFrame uint32, errorCountOverflow uint32, err error)

Returns the error count for the communication between Brick and Bricklet.

The errors are divided into

* ACK checksum errors, * message checksum errors, * framing errors and * overflow errors.

The errors counts are for errors that occur on the Bricklet side. All Bricks have a similar function that returns the errors on the Brick side.

func (*OneWireBricklet) GetStatusLEDConfig 

func (device *OneWireBricklet) GetStatusLEDConfig() (config StatusLEDConfig, err error)

Returns the configuration as set by SetStatusLEDConfig

Associated constants:

  • StatusLEDConfigOff
  • StatusLEDConfigOn
  • StatusLEDConfigShowHeartbeat
  • StatusLEDConfigShowStatus

func (*OneWireBricklet) Read 

func (device *OneWireBricklet) Read() (data uint8, status Status, err error)

Reads a byte of data from the 1-Wire bus.

Associated constants:

  • StatusOK
  • StatusBusy
  • StatusNoPresence
  • StatusTimeout
  • StatusError

func (*OneWireBricklet) ReadUID 

func (device *OneWireBricklet) ReadUID() (uid uint32, err error)

Returns the current UID as an integer. Encode as Base58 to get the usual string version.

func (*OneWireBricklet) Reset 

func (device *OneWireBricklet) Reset() (err error)

Calling this function will reset the Bricklet. All configurations will be lost.

After a reset you have to create new device objects, calling functions on the existing ones will result in undefined behavior!

func (*OneWireBricklet) ResetBus 

func (device *OneWireBricklet) ResetBus() (status Status, err error)

Resets the bus with the 1-Wire reset operation.

Associated constants:

  • StatusOK
  • StatusBusy
  • StatusNoPresence
  • StatusTimeout
  • StatusError

func (*OneWireBricklet) SearchBus 

func (device *OneWireBricklet) SearchBus() (identifier []uint64, status Status, err error)

Returns a list of up to 64 identifiers of the connected 1-Wire devices. Each identifier is 64-bit and consists of 8-bit family code, 48-bit ID and 8-bit CRC.

To get these identifiers the Bricklet runs the https://www.maximintegrated.com/en/app-notes/index.mvp/id/187, as defined by Maxim.

func (*OneWireBricklet) SearchBusLowLevel 

func (device *OneWireBricklet) SearchBusLowLevel() (identifierLength uint16, identifierChunkOffset uint16, identifierChunkData [7]uint64, status Status, err error)

Returns a list of up to 64 identifiers of the connected 1-Wire devices. Each identifier is 64-bit and consists of 8-bit family code, 48-bit ID and 8-bit CRC.

To get these identifiers the Bricklet runs the https://www.maximintegrated.com/en/app-notes/index.mvp/id/187, as defined by Maxim.

Associated constants:

  • StatusOK
  • StatusBusy
  • StatusNoPresence
  • StatusTimeout
  • StatusError

func (*OneWireBricklet) SetBootloaderMode 

func (device *OneWireBricklet) SetBootloaderMode(mode BootloaderMode) (status BootloaderStatus, err error)

Sets the bootloader mode and returns the status after the requested mode change was instigated.

You can change from bootloader mode to firmware mode and vice versa. A change from bootloader mode to firmware mode will only take place if the entry function, device identifier and CRC are present and correct.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

Associated constants:

  • BootloaderModeBootloader
  • BootloaderModeFirmware
  • BootloaderModeBootloaderWaitForReboot
  • BootloaderModeFirmwareWaitForReboot
  • BootloaderModeFirmwareWaitForEraseAndReboot
  • BootloaderStatusOK
  • BootloaderStatusInvalidMode
  • BootloaderStatusNoChange
  • BootloaderStatusEntryFunctionNotPresent
  • BootloaderStatusDeviceIdentifierIncorrect
  • BootloaderStatusCRCMismatch

func (*OneWireBricklet) SetCommunicationLEDConfig 

func (device *OneWireBricklet) SetCommunicationLEDConfig(config CommunicationLEDConfig) (err error)

Sets the communication LED configuration. By default the LED shows 1-wire communication traffic by flickering.

You can also turn the LED permanently on/off or show a heartbeat.

If the Bricklet is in bootloader mode, the LED is off.

Associated constants:

  • CommunicationLEDConfigOff
  • CommunicationLEDConfigOn
  • CommunicationLEDConfigShowHeartbeat
  • CommunicationLEDConfigShowCommunication

func (*OneWireBricklet) SetResponseExpected 

func (device *OneWireBricklet) SetResponseExpected(functionID Function, responseExpected bool) error

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

func (*OneWireBricklet) SetResponseExpectedAll 

func (device *OneWireBricklet) SetResponseExpectedAll(responseExpected bool)

Changes the response expected flag for all setter and callback configuration functions of this device at once.

func (*OneWireBricklet) SetStatusLEDConfig 

func (device *OneWireBricklet) SetStatusLEDConfig(config StatusLEDConfig) (err error)

Sets the status LED configuration. By default the LED shows communication traffic between Brick and Bricklet, it flickers once for every 10 received data packets.

You can also turn the LED permanently on/off or show a heartbeat.

If the Bricklet is in bootloader mode, the LED is will show heartbeat by default.

Associated constants:

  • StatusLEDConfigOff
  • StatusLEDConfigOn
  • StatusLEDConfigShowHeartbeat
  • StatusLEDConfigShowStatus

func (*OneWireBricklet) SetWriteFirmwarePointer 

func (device *OneWireBricklet) SetWriteFirmwarePointer(pointer uint32) (err error)

Sets the firmware pointer for WriteFirmware. The pointer has to be increased by chunks of size 64. The data is written to flash every 4 chunks (which equals to one page of size 256).

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

func (*OneWireBricklet) Write 

func (device *OneWireBricklet) Write(data uint8) (status Status, err error)

Writes a byte of data to the 1-Wire bus.

Associated constants:

  • StatusOK
  • StatusBusy
  • StatusNoPresence
  • StatusTimeout
  • StatusError

func (*OneWireBricklet) WriteCommand 

func (device *OneWireBricklet) WriteCommand(identifier uint64, command uint8) (status Status, err error)

Writes a command to the 1-Wire device with the given identifier. You can obtain the identifier by calling SearchBus. The MATCH ROM operation is used to write the command.

If you only have one device connected or want to broadcast to all devices you can set the identifier to 0. In this case the SKIP ROM operation is used to write the command.

Associated constants:

  • StatusOK
  • StatusBusy
  • StatusNoPresence
  • StatusTimeout
  • StatusError

func (*OneWireBricklet) WriteFirmware 

func (device *OneWireBricklet) WriteFirmware(data [64]uint8) (status uint8, err error)

Writes 64 Bytes of firmware at the position as written by SetWriteFirmwarePointer before. The firmware is written to flash every 4 chunks.

You can only write firmware in bootloader mode.

This function is used by Brick Viewer during flashing. It should not be necessary to call it in a normal user program.

func (*OneWireBricklet) WriteUID 

func (device *OneWireBricklet) WriteUID(uid uint32) (err error)

Writes a new UID into flash. If you want to set a new UID you have to decode the Base58 encoded UID string into an integer first.

We recommend that you use Brick Viewer to change the UID.

type Status 

type Status = uint8
const (
	StatusOK         Status = 0
	StatusBusy       Status = 1
	StatusNoPresence Status = 2
	StatusTimeout    Status = 3
	StatusError      Status = 4
)

type StatusLEDConfig 

type StatusLEDConfig = uint8
const (
	StatusLEDConfigOff           StatusLEDConfig = 0
	StatusLEDConfigOn            StatusLEDConfig = 1
	StatusLEDConfigShowHeartbeat StatusLEDConfig = 2
	StatusLEDConfigShowStatus    StatusLEDConfig = 3
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.