remote_switch_bricklet

package
v0.0.0-...-368b749 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Feb 27, 2024 License: CC0-1.0 Imports: 5 Imported by: 0

Documentation

Overview

Controls remote mains switches.

See also the documentation here: https://www.tinkerforge.com/en/doc/Software/Bricklets/RemoteSwitch_Bricklet_Go.html.

Index

Constants

View Source
const DeviceDisplayName = "Remote Switch Bricklet"
View Source
const DeviceIdentifier = 235

Variables

This section is empty.

Functions

This section is empty.

Types

type Function

type Function = uint8
const (
	FunctionSwitchSocket          Function = 1
	FunctionGetSwitchingState     Function = 2
	FunctionSetRepeats            Function = 4
	FunctionGetRepeats            Function = 5
	FunctionSwitchSocketA         Function = 6
	FunctionSwitchSocketB         Function = 7
	FunctionDimSocketB            Function = 8
	FunctionSwitchSocketC         Function = 9
	FunctionGetIdentity           Function = 255
	FunctionCallbackSwitchingDone Function = 3
)

type RemoteSwitchBricklet

type RemoteSwitchBricklet struct {
	// contains filtered or unexported fields
}

func New

Creates an object with the unique device ID `uid`. This object can then be used after the IP Connection `ipcon` is connected.

func (*RemoteSwitchBricklet) DeregisterSwitchingDoneCallback

func (device *RemoteSwitchBricklet) DeregisterSwitchingDoneCallback(registrationId uint64)

Remove a registered Switching Done callback.

func (*RemoteSwitchBricklet) DimSocketB

func (device *RemoteSwitchBricklet) DimSocketB(address uint32, unit uint8, dimValue uint8) (err error)

To control a type B dimmer you have to give the address, unit and the dim value you want to set the dimmer to.

A detailed description on how you can teach a dimmer the address and unit can be found `here <remote_switch_bricklet_type_b_address_and_unit>`.

.. versionadded:: 2.0.1$nbsp;(Plugin)

func (*RemoteSwitchBricklet) GetAPIVersion

func (device *RemoteSwitchBricklet) GetAPIVersion() [3]uint8

Returns the version of the API definition (major, minor, revision) implemented by this API bindings. This is neither the release version of this API bindings nor does it tell you anything about the represented Brick or Bricklet.

func (*RemoteSwitchBricklet) GetIdentity

func (device *RemoteSwitchBricklet) GetIdentity() (uid string, connectedUid string, position rune, hardwareVersion [3]uint8, firmwareVersion [3]uint8, deviceIdentifier uint16, err error)

Returns the UID, the UID where the Bricklet is connected to, the position, the hardware and firmware version as well as the device identifier.

The position can be 'a', 'b', 'c', 'd', 'e', 'f', 'g' or 'h' (Bricklet Port). A Bricklet connected to an `Isolator Bricklet <isolator_bricklet>` is always at position 'z'.

The device identifier numbers can be found `here <device_identifier>`. |device_identifier_constant|

func (*RemoteSwitchBricklet) GetRepeats

func (device *RemoteSwitchBricklet) GetRepeats() (repeats uint8, err error)

Returns the number of repeats as set by SetRepeats.

func (*RemoteSwitchBricklet) GetResponseExpected

func (device *RemoteSwitchBricklet) GetResponseExpected(functionID Function) (bool, error)

Returns the response expected flag for the function specified by the function ID parameter. It is true if the function is expected to send a response, false otherwise.

For getter functions this is enabled by default and cannot be disabled, because those functions will always send a response. For callback configuration functions it is enabled by default too, but can be disabled by SetResponseExpected. For setter functions it is disabled by default and can be enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

See SetResponseExpected for the list of function ID constants available for this function.

func (*RemoteSwitchBricklet) GetSwitchingState

func (device *RemoteSwitchBricklet) GetSwitchingState() (state SwitchingState, err error)

Returns the current switching state. If the current state is busy, the Bricklet is currently sending a code to switch a socket. It will not accept any requests to switch sockets until the state changes to ready.

How long the switching takes is dependent on the number of repeats, see SetRepeats.

Associated constants:

  • SwitchingStateReady
  • SwitchingStateBusy

func (*RemoteSwitchBricklet) RegisterSwitchingDoneCallback

func (device *RemoteSwitchBricklet) RegisterSwitchingDoneCallback(fn func()) uint64

This callback is triggered whenever the switching state changes from busy to ready, see GetSwitchingState.

func (*RemoteSwitchBricklet) SetRepeats

func (device *RemoteSwitchBricklet) SetRepeats(repeats uint8) (err error)

Sets the number of times the code is sent when one of the switch socket functions is called. The repeats basically correspond to the amount of time that a button of the remote is pressed.

Some dimmers are controlled by the length of a button pressed, this can be simulated by increasing the repeats.

func (*RemoteSwitchBricklet) SetResponseExpected

func (device *RemoteSwitchBricklet) SetResponseExpected(functionID Function, responseExpected bool) error

Changes the response expected flag of the function specified by the function ID parameter. This flag can only be changed for setter (default value: false) and callback configuration functions (default value: true). For getter functions it is always enabled.

Enabling the response expected flag for a setter function allows to detect timeouts and other error conditions calls of this setter as well. The device will then send a response for this purpose. If this flag is disabled for a setter function then no response is sent and errors are silently ignored, because they cannot be detected.

func (*RemoteSwitchBricklet) SetResponseExpectedAll

func (device *RemoteSwitchBricklet) SetResponseExpectedAll(responseExpected bool)

Changes the response expected flag for all setter and callback configuration functions of this device at once.

func (*RemoteSwitchBricklet) SwitchSocket

func (device *RemoteSwitchBricklet) SwitchSocket(houseCode uint8, receiverCode uint8, switchTo SwitchTo) (err error)

This function is deprecated, use SwitchSocketA instead.

Associated constants:

  • SwitchToOff
  • SwitchToOn

func (*RemoteSwitchBricklet) SwitchSocketA

func (device *RemoteSwitchBricklet) SwitchSocketA(houseCode uint8, receiverCode uint8, switchTo SwitchTo) (err error)

To switch a type A socket you have to give the house code, receiver code and the state (on or off) you want to switch to.

A detailed description on how you can figure out the house and receiver code can be found `here <remote_switch_bricklet_type_a_house_and_receiver_code>`.

.. versionadded:: 2.0.1$nbsp;(Plugin)

Associated constants:

  • SwitchToOff
  • SwitchToOn

func (*RemoteSwitchBricklet) SwitchSocketB

func (device *RemoteSwitchBricklet) SwitchSocketB(address uint32, unit uint8, switchTo SwitchTo) (err error)

To switch a type B socket you have to give the address, unit and the state (on or off) you want to switch to.

To switch all devices with the same address use 255 for the unit.

A detailed description on how you can teach a socket the address and unit can be found `here <remote_switch_bricklet_type_b_address_and_unit>`.

.. versionadded:: 2.0.1$nbsp;(Plugin)

Associated constants:

  • SwitchToOff
  • SwitchToOn

func (*RemoteSwitchBricklet) SwitchSocketC

func (device *RemoteSwitchBricklet) SwitchSocketC(systemCode rune, deviceCode uint8, switchTo SwitchTo) (err error)

To switch a type C socket you have to give the system code, device code and the state (on or off) you want to switch to.

A detailed description on how you can figure out the system and device code can be found `here <remote_switch_bricklet_type_c_system_and_device_code>`.

.. versionadded:: 2.0.1$nbsp;(Plugin)

Associated constants:

  • SwitchToOff
  • SwitchToOn

type SwitchTo

type SwitchTo = uint8
const (
	SwitchToOff SwitchTo = 0
	SwitchToOn  SwitchTo = 1
)

type SwitchingState

type SwitchingState = uint8
const (
	SwitchingStateReady SwitchingState = 0
	SwitchingStateBusy  SwitchingState = 1
)

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL