grove

command
v7.0.0+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Aug 9, 2022 License: Apache-2.0, BSD-2-Clause, BSD-3-Clause, + 1 more Imports: 29 Imported by: 0

README

grove

HTTP caching proxy, implementing RFC 7234

Building

  1. Install and set up a Golang development environment.
  2. Get the necessary dependencies.
go mod vendor -v
  • golang.org/x must be updated when the Go compiler is, so we treat it as part of the compiler, rather than vendoring it like other dependencies, to avoid breaking updating to newer compilers than we internally work with. If you know what you're doing, feel free to skip this step.
  1. Clone this repository into your GOPATH.
mkdir -p $GOPATH/src/github.com/apache/trafficcontrol
cd $GOPATH/src/github.com/apache/trafficcontrol
git clone https://github.com/apache/trafficcontrol/grove
  1. Build the application
cd $GOPATH/src/github.com/apache/trafficcontrol/grove
go build
  1. Install and configure an RPM development environment
  2. Build the RPM
./build/build_rpm.sh

Configuration

A config file must be passed with the -cfg flag on startup. The RPM uses a config file at /etc/grove/grove.cfg.

The config file is JSON of the following format:

{ "rfc_compliant": false,
  "port": 8080,
  "cache_size_bytes": 50000,
  "remap_rules_file": "./remap.json",
  "plugins": ["ats_log", "http_stats", "if_modified_since", "record_stats"],

The config file has the following fields:

Field Description
rfc_compliant Whether to strictly adhere to RFC 7234. If false, client requests which can harm a parent, such as no-cache are ignored.
port The HTTP port to serve on.
https_port The HTTPS port to serve on.
disable_http2 When set to true, HTTP2 support is disabled, the default is 'false' with HTTP2 enabled. changing this setting requires a restart of grove.
cache_size_bytes The maximum size of the memory cache, in bytes. This is a soft maximum, and the cache may temporarily exceed this size until older values can be purged. The cache uses a Least Recently Used algorithm, purging the oldest requested object when a request for an uncached object is received with a full cache. Also note the cache size calculation does not currently count headers.
remap_rules_file The file with remap rules. See Remap Rules.
concurrent_rule_requests The maximum number of simultaneous requests which will be issued to a parent for any rule.
cert_file The global HTTPS certificate file to use, for HTTPS remap rules without certificates specified.
key_file The global HTTPS certificate key file to use, for HTTPS remap rules without certificates specified.
interface_name The name of the network interface to gather statistics for. This does not affect which addresses are bound for listening, currently the app listens on the given port for all addresses, irrespective of interface.
connection_close Whether to send a Connection: Close header with responses. This is primarily designed for debugging and operations use, for example, to help remove clients from a cache in order to take it out of service.
log_location_error The location to log error messages to. May be any file, stdout, stderr, or null.
log_location_warning The location to log warning messages to. May be any file, stdout, stderr, or null.
log_location_info The location to log informational messages to. May be any file, stdout, stderr, or null.
log_location_debug The location to log debug messages to. May be any file, stdout, stderr, or null.
log_location_event The location to log access events to. May be any file, stdout, stderr, or null.
parent_request_timeout_ms The timeout in milliseconds for requests to parents.
parent_request_keep_alive_ms The length of time in milliseconds to keep connections to parents alive, for multiple requests.
parent_request_max_idle_connections The maximum number of idle kept-alive connections to retain per parent.
parent_request_idle_connection_timeout_ms The length of time in milliseconds to keep an idle parent connection alive, before terminating it.
server_idle_timeout_ms The length of time in milliseconds to allow a kept-alive client connection to remain idle, before terminating it.
server_read_timeout_ms The length of time in milliseconds to allow a client to read data, before the connection is terminated. This value should be carefully considered, as too short a timeout will result in terminating legitimate clients with slow connections, while too long a timeout will make the server vulnerable to SlowLoris attacks.
server_write_timeout_ms The length of time in milliseconds to allow a client to write data, before the connection is terminated. This value should be carefully considered, as too short a timeout will result in terminating legitimate clients with slow connections, while too long a timeout will make the server vulnerable to SlowLoris attacks.
cache_files Groups of cache files to use for disk caching. See Disk Cache
file_mem_bytes The size in bytes of the memory cache to use for each group of cache files. Note this size is used for each group, and thus the total memory used is file_mem_bytes*len(cache_files)+cache_size_bytes. See Disk Cache
plugins An array of plugins to enable

Remap Rules

The remap rules file is specified in the config file.

Note there exists a tool for generating remap rules from Traffic Control, available here.

The remap rules file is JSON of the following form:

{
    "parent_selection": "consistent-hash",
    "retry_codes": [ 501, 404 ],
    "retry_num": null,
    "rules": [
        {
            "allow": [ "::1/128", "0.0.0.0/0" ],
            "certificate-file": "",
            "certificate-key-file": "",
            "concurrent_rule_requests": 0,
            "connection-close": false,
            "deny": [ "::1/128", "0.0.0.0/0" ],
            "from": "http://foo.example.net",
            "name": "foo.example.com.http.http",
            "parent_selection": "consistent-hash",
            "query-string": { "cache": true, "remap": true },
            "retry_codes": [ 404, 500 ],
            "retry_num": 5,
            "cache_name": "disk",
            "timeout_ms": 5000,
            "to": [
                {
                    "parent_selection": "consistent-hash",
                    "proxy_url": "http://proxy.example.net:80",
                    "retry_codes": [ 500, 404 ],
                    "retry_num": 5,
                    "timeout_ms": 5000,
                    "url": "http://bar.example.net",
                    "weight": 1
                }
            ]
        }
    ],
    "timeout_ms": 5000
}

Rule configuration may be specified at the global, rule, or to level, and the most specific field applies. Remap rules have the following configuration fields:

Field Description
retry_num The number of times to retry a parent request.
cache_name The name of the cache to use, specified in the global config. Defaults to the memory cache.
retry_codes The HTTP codes which will be considered failures and cause a failure and cause a retry on the next parent. If retry_num tries are exceeded, the final failure response will be cached and returned to the client.
timeout_ms The request timeout in milliseconds for the given parent.
parent_selection The parent selection algorithm. Currently, only consistent-hash is supported.
concurrent_rule_requests The maximum number of concurrent requests to make to the parent, for this rule.
allow An array of CIDR networks to allow access. This may include both IPv4 and IPv6 networks. Note single IPs must be in CIDR format, e.g. 192.0.2.1/32.
deny An array of CIDR networks to deny access to. This may include both IPv4 and IPv6 networks. Note single IPs must be in CIDR format, e.g. 192.0.2.1/32.

The global object must also include a rules key, with an array of rule objects. Each remap rule has the following fields:

Field Description
name The internal name for the given rule. This is not used in request mapping, and may be any unique string.
from The request to remap, including the scheme and fully qualified domain name. This may also optionally include URL path parts.
certificate-file The file path for the certificate for this HTTPS request. This field is not used for HTTP requests.
certificate-key-file The file path for the certificate key for this HTTPS request. This field is not used for HTTP requests.
connection-close Whether to add a Connection: Close header to client responses for this rule. This is designed for maintenance, operations, or debugging.
query-string A JSON object with the boolean keys remap and cache. The remap key indicates whether to append request query strings to the parent request. The cache key incidates whether to cache requests with different query strings separately.
to The array of parents for the given rule.

The objects in the to array of parents have the following fields:

Field Description
url The parent URL to remap to, including the scheme and fully qualified domain name. This may also optionally include URL path parts.
weight The weight of this parent in the parent selection algorithm.
proxy_url The proxy URL, if this parent is being used as a forward proxy. Must include the scheme, fully qualified domain name, and port. If this rule is omitted, the parent will be requested directly with the url as a reverse proxy.

Remap Rules and Nonstandard Ports

In the remap rules file, the from is mapped verbatim to the to, and from is the Host header, Grove doesn't care anything about what DNS thinks the server is.

This is especially confusing when Grove is running on a nonstandard port, because clients (like curl) will automatically append the port. For example, if Grove is serving at http://foo.example:8080, then curl http://foo.example:8080/bar will automatically send a Host header of foo.example:8080. This means, to work with clients automatically sending the port, the from remap must be http://foo.example:8080, not http://foo.example. Otherwise, because the mapping is done verbatim, it will match only the part before the port, and include the port in the remap.

For example, if a remap rule exists from http://foo.example and to http://bar.example:1234, and Grove is serving on :8080, a request to curl http://foo.example:8080/baz will automatically send Host: foo.example:8080, and Grove will find a remap match and replace http://foo.example with http://bar.example, resulting in a malformed parent of http://bar.example:1234:8080/baz. Which is almost certainly not what you want.

Therefore, for the literal Host header remapping Grove does, when Grove is serving on a nonstandard port, including the port in the from is almost always the right solution. Alternatively, if clients are known to be sending a Host header without the port, even to requests at a nonstandard port, the port must not be included in order for the remap rule to match.

Disk Cache

By default, all remap rules use a shared memory cache, of the size specified in the global config cache_size_bytes key. However, it is also possible to use disk caching.

Disk caching uses files, organized into groups. They are specified in the global config with the key cache_files, of the form:

"cache_files": {
    "my-disk-cache": [
        {
          "path": "/mnt/sdb/diskcachefile0.db",
          "size_bytes": 100000000000
        },
        {
          "path": "/mnt/sdc/diskcachefile1.db",
          "size_bytes": 100000000000
        }
    ],
    "my-disk-cache-two": [
        {
          "path": "/etc/grove/singlefilecache.db",
          "size_bytes": 1000000000
        }
    ]
},

Then, to specify that a remap rule uses the disk cache, add "cache_name": "my-disk-cache", to that remap rule's object in the remap rules file.

Note the size_bytes is a soft maximum, as with the memory cache, which may be exceeded in order to perform better than a hard maximum.

Each cache of disk files also has a memory cache in front of it, for performance. The size of this memory cache is determined by the global config file_mem_bytes setting.

Groups of files are used primarily to allow a cache to distribute objects across multiple physical devices. Each request object will be consistent-hashed to a file. You can, of course, use a single file.

Each file is a key-value database, which internally uses a B+tree (see https://github.com/coreos/bbolt). The database is optimized for read over write, and access is frequently random so SSDs should outperform HDDs.

Running

The application may be run manually via ./grove -cfg grove.cfg, or if installed via the RPM, as a service via service grove start or systemctl start grove.

If there are errors, they will be logged to the error location in the config file (/etc/grove/grove.cfg for the service), or if the errors are with the config file itself, to stdout.

Documentation

The Go Gopher

There is no documentation for this package.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL