Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type ApplicationSource

type ApplicationSource struct {

	// The Amazon Resource Name (ARN) of a AWS CloudFormation stack.
	CloudFormationStackARN *string

	// A set of tags (up to 50).
	TagFilters []TagFilter
}

    Represents an application source.

    type ConcurrentUpdateException

    type ConcurrentUpdateException struct {
    	Message *string
    }

      Concurrent updates caused an exception, for example, if you request an update to a scaling plan that already has a pending update.

      func (*ConcurrentUpdateException) Error

      func (e *ConcurrentUpdateException) Error() string

      func (*ConcurrentUpdateException) ErrorCode

      func (e *ConcurrentUpdateException) ErrorCode() string

      func (*ConcurrentUpdateException) ErrorFault

      func (*ConcurrentUpdateException) ErrorMessage

      func (e *ConcurrentUpdateException) ErrorMessage() string

      type CustomizedLoadMetricSpecification

      type CustomizedLoadMetricSpecification struct {
      
      	// The name of the metric.
      	//
      	// This member is required.
      	MetricName *string
      
      	// The namespace of the metric.
      	//
      	// This member is required.
      	Namespace *string
      
      	// The statistic of the metric. Currently, the value must always be Sum.
      	//
      	// This member is required.
      	Statistic MetricStatistic
      
      	// The dimensions of the metric. Conditional: If you published your metric with
      	// dimensions, you must specify the same dimensions in your customized load metric
      	// specification.
      	Dimensions []MetricDimension
      
      	// The unit of the metric.
      	Unit *string
      }

        Represents a CloudWatch metric of your choosing that can be used for predictive scaling. For predictive scaling to work with a customized load metric specification, AWS Auto Scaling needs access to the Sum and Average statistics that CloudWatch computes from metric data. Statistics are calculations used to aggregate data over specified time periods. When you choose a load metric, make sure that the required Sum and Average statistics for your metric are available in CloudWatch and that they provide relevant data for predictive scaling. The Sum statistic must represent the total load on the resource, and the Average statistic must represent the average load per capacity unit of the resource. For example, there is a metric that counts the number of requests processed by your Auto Scaling group. If the Sum statistic represents the total request count processed by the group, then the Average statistic for the specified metric must represent the average request count processed by each instance of the group. For information about terminology, available metrics, or how to publish new metrics, see Amazon CloudWatch Concepts (https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/cloudwatch_concepts.html) in the Amazon CloudWatch User Guide.

        type CustomizedScalingMetricSpecification

        type CustomizedScalingMetricSpecification struct {
        
        	// The name of the metric.
        	//
        	// This member is required.
        	MetricName *string
        
        	// The namespace of the metric.
        	//
        	// This member is required.
        	Namespace *string
        
        	// The statistic of the metric.
        	//
        	// This member is required.
        	Statistic MetricStatistic
        
        	// The dimensions of the metric. Conditional: If you published your metric with
        	// dimensions, you must specify the same dimensions in your customized scaling
        	// metric specification.
        	Dimensions []MetricDimension
        
        	// The unit of the metric.
        	Unit *string
        }

          Represents a CloudWatch metric of your choosing that can be used for dynamic scaling as part of a target tracking scaling policy. To create your customized scaling metric specification:

          * Add values for each required parameter from CloudWatch. You can use an existing metric, or a new metric that you create. To use your own metric, you must first publish the metric to CloudWatch. For more information, see Publish Custom Metrics (https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/publishingMetrics.html) in the Amazon CloudWatch User Guide.

          * Choose a metric that changes proportionally with capacity. The value of the metric should increase or decrease in inverse proportion to the number of capacity units. That is, the value of the metric should decrease when capacity increases.

          For more information about CloudWatch, see Amazon CloudWatch Concepts (https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/cloudwatch_concepts.html).

          type Datapoint

          type Datapoint struct {
          
          	// The time stamp for the data point in UTC format.
          	Timestamp *time.Time
          
          	// The value of the data point.
          	Value *float64
          }

            Represents a single value in the forecast data used for predictive scaling.

            type ForecastDataType

            type ForecastDataType string
            const (
            	ForecastDataTypeCapacityForecast           ForecastDataType = "CapacityForecast"
            	ForecastDataTypeLoadForecast               ForecastDataType = "LoadForecast"
            	ForecastDataTypeScheduledActionMinCapacity ForecastDataType = "ScheduledActionMinCapacity"
            	ForecastDataTypeScheduledActionMaxCapacity ForecastDataType = "ScheduledActionMaxCapacity"
            )

              Enum values for ForecastDataType

              func (ForecastDataType) Values

                Values returns all known values for ForecastDataType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                type InternalServiceException

                type InternalServiceException struct {
                	Message *string
                }

                  The service encountered an internal error.

                  func (*InternalServiceException) Error

                  func (e *InternalServiceException) Error() string

                  func (*InternalServiceException) ErrorCode

                  func (e *InternalServiceException) ErrorCode() string

                  func (*InternalServiceException) ErrorFault

                  func (e *InternalServiceException) ErrorFault() smithy.ErrorFault

                  func (*InternalServiceException) ErrorMessage

                  func (e *InternalServiceException) ErrorMessage() string

                  type InvalidNextTokenException

                  type InvalidNextTokenException struct {
                  	Message *string
                  }

                    The token provided is not valid.

                    func (*InvalidNextTokenException) Error

                    func (e *InvalidNextTokenException) Error() string

                    func (*InvalidNextTokenException) ErrorCode

                    func (e *InvalidNextTokenException) ErrorCode() string

                    func (*InvalidNextTokenException) ErrorFault

                    func (*InvalidNextTokenException) ErrorMessage

                    func (e *InvalidNextTokenException) ErrorMessage() string

                    type LimitExceededException

                    type LimitExceededException struct {
                    	Message *string
                    }

                      Your account exceeded a limit. This exception is thrown when a per-account resource limit is exceeded.

                      func (*LimitExceededException) Error

                      func (e *LimitExceededException) Error() string

                      func (*LimitExceededException) ErrorCode

                      func (e *LimitExceededException) ErrorCode() string

                      func (*LimitExceededException) ErrorFault

                      func (e *LimitExceededException) ErrorFault() smithy.ErrorFault

                      func (*LimitExceededException) ErrorMessage

                      func (e *LimitExceededException) ErrorMessage() string

                      type LoadMetricType

                      type LoadMetricType string
                      const (
                      	LoadMetricTypeASGTotalCPUUtilization     LoadMetricType = "ASGTotalCPUUtilization"
                      	LoadMetricTypeASGTotalNetworkIn          LoadMetricType = "ASGTotalNetworkIn"
                      	LoadMetricTypeASGTotalNetworkOut         LoadMetricType = "ASGTotalNetworkOut"
                      	LoadMetricTypeALBTargetGroupRequestCount LoadMetricType = "ALBTargetGroupRequestCount"
                      )

                        Enum values for LoadMetricType

                        func (LoadMetricType) Values

                        func (LoadMetricType) Values() []LoadMetricType

                          Values returns all known values for LoadMetricType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                          type MetricDimension

                          type MetricDimension struct {
                          
                          	// The name of the dimension.
                          	//
                          	// This member is required.
                          	Name *string
                          
                          	// The value of the dimension.
                          	//
                          	// This member is required.
                          	Value *string
                          }

                            Represents a dimension for a customized metric.

                            type MetricStatistic

                            type MetricStatistic string
                            const (
                            	MetricStatisticAverage     MetricStatistic = "Average"
                            	MetricStatisticMinimum     MetricStatistic = "Minimum"
                            	MetricStatisticMaximum     MetricStatistic = "Maximum"
                            	MetricStatisticSampleCount MetricStatistic = "SampleCount"
                            	MetricStatisticSum         MetricStatistic = "Sum"
                            )

                              Enum values for MetricStatistic

                              func (MetricStatistic) Values

                              func (MetricStatistic) Values() []MetricStatistic

                                Values returns all known values for MetricStatistic. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                type ObjectNotFoundException

                                type ObjectNotFoundException struct {
                                	Message *string
                                }

                                  The specified object could not be found.

                                  func (*ObjectNotFoundException) Error

                                  func (e *ObjectNotFoundException) Error() string

                                  func (*ObjectNotFoundException) ErrorCode

                                  func (e *ObjectNotFoundException) ErrorCode() string

                                  func (*ObjectNotFoundException) ErrorFault

                                  func (e *ObjectNotFoundException) ErrorFault() smithy.ErrorFault

                                  func (*ObjectNotFoundException) ErrorMessage

                                  func (e *ObjectNotFoundException) ErrorMessage() string

                                  type PolicyType

                                  type PolicyType string
                                  const (
                                  	PolicyTypeTargetTrackingScaling PolicyType = "TargetTrackingScaling"
                                  )

                                    Enum values for PolicyType

                                    func (PolicyType) Values

                                    func (PolicyType) Values() []PolicyType

                                      Values returns all known values for PolicyType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                      type PredefinedLoadMetricSpecification

                                      type PredefinedLoadMetricSpecification struct {
                                      
                                      	// The metric type.
                                      	//
                                      	// This member is required.
                                      	PredefinedLoadMetricType LoadMetricType
                                      
                                      	// Identifies the resource associated with the metric type. You can't specify a
                                      	// resource label unless the metric type is ALBRequestCountPerTarget and there is a
                                      	// target group for an Application Load Balancer attached to the Auto Scaling
                                      	// group. The format is app///targetgroup//, where:
                                      	//
                                      	// * app// is the final portion
                                      	// of the load balancer ARN.
                                      	//
                                      	// * targetgroup// is the final portion of the target
                                      	// group ARN.
                                      	ResourceLabel *string
                                      }

                                        Represents a predefined metric that can be used for predictive scaling.

                                        type PredefinedScalingMetricSpecification

                                        type PredefinedScalingMetricSpecification struct {
                                        
                                        	// The metric type. The ALBRequestCountPerTarget metric type applies only to Auto
                                        	// Scaling groups, Spot Fleet requests, and ECS services.
                                        	//
                                        	// This member is required.
                                        	PredefinedScalingMetricType ScalingMetricType
                                        
                                        	// Identifies the resource associated with the metric type. You can't specify a
                                        	// resource label unless the metric type is ALBRequestCountPerTarget and there is a
                                        	// target group for an Application Load Balancer attached to the Auto Scaling
                                        	// group, Spot Fleet request, or ECS service. The format is app///targetgroup//,
                                        	// where:
                                        	//
                                        	// * app// is the final portion of the load balancer ARN.
                                        	//
                                        	// * targetgroup//
                                        	// is the final portion of the target group ARN.
                                        	ResourceLabel *string
                                        }

                                          Represents a predefined metric that can be used for dynamic scaling as part of a target tracking scaling policy.

                                          type PredictiveScalingMaxCapacityBehavior

                                          type PredictiveScalingMaxCapacityBehavior string
                                          const (
                                          	PredictiveScalingMaxCapacityBehaviorSetForecastCapacityToMaxCapacity    PredictiveScalingMaxCapacityBehavior = "SetForecastCapacityToMaxCapacity"
                                          	PredictiveScalingMaxCapacityBehaviorSetMaxCapacityToForecastCapacity    PredictiveScalingMaxCapacityBehavior = "SetMaxCapacityToForecastCapacity"
                                          	PredictiveScalingMaxCapacityBehaviorSetMaxCapacityAboveForecastCapacity PredictiveScalingMaxCapacityBehavior = "SetMaxCapacityAboveForecastCapacity"
                                          )

                                            Enum values for PredictiveScalingMaxCapacityBehavior

                                            func (PredictiveScalingMaxCapacityBehavior) Values

                                              Values returns all known values for PredictiveScalingMaxCapacityBehavior. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                              type PredictiveScalingMode

                                              type PredictiveScalingMode string
                                              const (
                                              	PredictiveScalingModeForecastAndScale PredictiveScalingMode = "ForecastAndScale"
                                              	PredictiveScalingModeForecastOnly     PredictiveScalingMode = "ForecastOnly"
                                              )

                                                Enum values for PredictiveScalingMode

                                                func (PredictiveScalingMode) Values

                                                  Values returns all known values for PredictiveScalingMode. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                  type ScalableDimension

                                                  type ScalableDimension string
                                                  const (
                                                  	ScalableDimensionAutoScalingGroupDesiredCapacity   ScalableDimension = "autoscaling:autoScalingGroup:DesiredCapacity"
                                                  	ScalableDimensionECSServiceDesiredCount            ScalableDimension = "ecs:service:DesiredCount"
                                                  	ScalableDimensionEC2SpotFleetRequestTargetCapacity ScalableDimension = "ec2:spot-fleet-request:TargetCapacity"
                                                  	ScalableDimensionRDSClusterReadReplicaCount        ScalableDimension = "rds:cluster:ReadReplicaCount"
                                                  	ScalableDimensionDynamoDBTableReadCapacityUnits    ScalableDimension = "dynamodb:table:ReadCapacityUnits"
                                                  	ScalableDimensionDynamoDBTableWriteCapacityUnits   ScalableDimension = "dynamodb:table:WriteCapacityUnits"
                                                  	ScalableDimensionDynamoDBIndexReadCapacityUnits    ScalableDimension = "dynamodb:index:ReadCapacityUnits"
                                                  	ScalableDimensionDynamoDBIndexWriteCapacityUnits   ScalableDimension = "dynamodb:index:WriteCapacityUnits"
                                                  )

                                                    Enum values for ScalableDimension

                                                    func (ScalableDimension) Values

                                                      Values returns all known values for ScalableDimension. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                      type ScalingInstruction

                                                      type ScalingInstruction struct {
                                                      
                                                      	// The maximum capacity of the resource. The exception to this upper limit is if
                                                      	// you specify a non-default setting for PredictiveScalingMaxCapacityBehavior.
                                                      	//
                                                      	// This member is required.
                                                      	MaxCapacity *int32
                                                      
                                                      	// The minimum capacity of the resource.
                                                      	//
                                                      	// This member is required.
                                                      	MinCapacity *int32
                                                      
                                                      	// The ID of the resource. This string consists of the resource type and unique
                                                      	// identifier.
                                                      	//
                                                      	// * Auto Scaling group - The resource type is autoScalingGroup and
                                                      	// the unique identifier is the name of the Auto Scaling group. Example:
                                                      	// autoScalingGroup/my-asg.
                                                      	//
                                                      	// * ECS service - The resource type is service and the
                                                      	// unique identifier is the cluster name and service name. Example:
                                                      	// service/default/sample-webapp.
                                                      	//
                                                      	// * Spot Fleet request - The resource type is
                                                      	// spot-fleet-request and the unique identifier is the Spot Fleet request ID.
                                                      	// Example: spot-fleet-request/sfr-73fbd2ce-aa30-494c-8788-1cee4EXAMPLE.
                                                      	//
                                                      	// *
                                                      	// DynamoDB table - The resource type is table and the unique identifier is the
                                                      	// resource ID. Example: table/my-table.
                                                      	//
                                                      	// * DynamoDB global secondary index - The
                                                      	// resource type is index and the unique identifier is the resource ID. Example:
                                                      	// table/my-table/index/my-table-index.
                                                      	//
                                                      	// * Aurora DB cluster - The resource type is
                                                      	// cluster and the unique identifier is the cluster name. Example:
                                                      	// cluster:my-db-cluster.
                                                      	//
                                                      	// This member is required.
                                                      	ResourceId *string
                                                      
                                                      	// The scalable dimension associated with the resource.
                                                      	//
                                                      	// *
                                                      	// autoscaling:autoScalingGroup:DesiredCapacity - The desired capacity of an Auto
                                                      	// Scaling group.
                                                      	//
                                                      	// * ecs:service:DesiredCount - The desired task count of an ECS
                                                      	// service.
                                                      	//
                                                      	// * ec2:spot-fleet-request:TargetCapacity - The target capacity of a
                                                      	// Spot Fleet request.
                                                      	//
                                                      	// * dynamodb:table:ReadCapacityUnits - The provisioned read
                                                      	// capacity for a DynamoDB table.
                                                      	//
                                                      	// * dynamodb:table:WriteCapacityUnits - The
                                                      	// provisioned write capacity for a DynamoDB table.
                                                      	//
                                                      	// *
                                                      	// dynamodb:index:ReadCapacityUnits - The provisioned read capacity for a DynamoDB
                                                      	// global secondary index.
                                                      	//
                                                      	// * dynamodb:index:WriteCapacityUnits - The provisioned
                                                      	// write capacity for a DynamoDB global secondary index.
                                                      	//
                                                      	// *
                                                      	// rds:cluster:ReadReplicaCount - The count of Aurora Replicas in an Aurora DB
                                                      	// cluster. Available for Aurora MySQL-compatible edition and Aurora
                                                      	// PostgreSQL-compatible edition.
                                                      	//
                                                      	// This member is required.
                                                      	ScalableDimension ScalableDimension
                                                      
                                                      	// The namespace of the AWS service.
                                                      	//
                                                      	// This member is required.
                                                      	ServiceNamespace ServiceNamespace
                                                      
                                                      	// The structure that defines new target tracking configurations (up to 10). Each
                                                      	// of these structures includes a specific scaling metric and a target value for
                                                      	// the metric, along with various parameters to use with dynamic scaling. With
                                                      	// predictive scaling and dynamic scaling, the resource scales based on the target
                                                      	// tracking configuration that provides the largest capacity for both scale in and
                                                      	// scale out. Condition: The scaling metric must be unique across target tracking
                                                      	// configurations.
                                                      	//
                                                      	// This member is required.
                                                      	TargetTrackingConfigurations []TargetTrackingConfiguration
                                                      
                                                      	// The customized load metric to use for predictive scaling. This parameter or a
                                                      	// PredefinedLoadMetricSpecification is required when configuring predictive
                                                      	// scaling, and cannot be used otherwise.
                                                      	CustomizedLoadMetricSpecification *CustomizedLoadMetricSpecification
                                                      
                                                      	// Controls whether dynamic scaling by AWS Auto Scaling is disabled. When dynamic
                                                      	// scaling is enabled, AWS Auto Scaling creates target tracking scaling policies
                                                      	// based on the specified target tracking configurations. The default is enabled
                                                      	// (false).
                                                      	DisableDynamicScaling *bool
                                                      
                                                      	// The predefined load metric to use for predictive scaling. This parameter or a
                                                      	// CustomizedLoadMetricSpecification is required when configuring predictive
                                                      	// scaling, and cannot be used otherwise.
                                                      	PredefinedLoadMetricSpecification *PredefinedLoadMetricSpecification
                                                      
                                                      	// Defines the behavior that should be applied if the forecast capacity approaches
                                                      	// or exceeds the maximum capacity specified for the resource. The default value is
                                                      	// SetForecastCapacityToMaxCapacity. The following are possible values:
                                                      	//
                                                      	// *
                                                      	// SetForecastCapacityToMaxCapacity - AWS Auto Scaling cannot scale resource
                                                      	// capacity higher than the maximum capacity. The maximum capacity is enforced as a
                                                      	// hard limit.
                                                      	//
                                                      	// * SetMaxCapacityToForecastCapacity - AWS Auto Scaling may scale
                                                      	// resource capacity higher than the maximum capacity to equal but not exceed
                                                      	// forecast capacity.
                                                      	//
                                                      	// * SetMaxCapacityAboveForecastCapacity - AWS Auto Scaling may
                                                      	// scale resource capacity higher than the maximum capacity by a specified buffer
                                                      	// value. The intention is to give the target tracking scaling policy extra
                                                      	// capacity if unexpected traffic occurs.
                                                      	//
                                                      	// Only valid when configuring predictive
                                                      	// scaling.
                                                      	PredictiveScalingMaxCapacityBehavior PredictiveScalingMaxCapacityBehavior
                                                      
                                                      	// The size of the capacity buffer to use when the forecast capacity is close to or
                                                      	// exceeds the maximum capacity. The value is specified as a percentage relative to
                                                      	// the forecast capacity. For example, if the buffer is 10, this means a 10 percent
                                                      	// buffer, such that if the forecast capacity is 50, and the maximum capacity is
                                                      	// 40, then the effective maximum capacity is 55. Only valid when configuring
                                                      	// predictive scaling. Required if the PredictiveScalingMaxCapacityBehavior is set
                                                      	// to SetMaxCapacityAboveForecastCapacity, and cannot be used otherwise. The range
                                                      	// is 1-100.
                                                      	PredictiveScalingMaxCapacityBuffer *int32
                                                      
                                                      	// The predictive scaling mode. The default value is ForecastAndScale. Otherwise,
                                                      	// AWS Auto Scaling forecasts capacity but does not create any scheduled scaling
                                                      	// actions based on the capacity forecast.
                                                      	PredictiveScalingMode PredictiveScalingMode
                                                      
                                                      	// Controls whether a resource's externally created scaling policies are kept or
                                                      	// replaced. The default value is KeepExternalPolicies. If the parameter is set to
                                                      	// ReplaceExternalPolicies, any scaling policies that are external to AWS Auto
                                                      	// Scaling are deleted and new target tracking scaling policies created. Only valid
                                                      	// when configuring dynamic scaling. Condition: The number of existing policies to
                                                      	// be replaced must be less than or equal to 50. If there are more than 50 policies
                                                      	// to be replaced, AWS Auto Scaling keeps all existing policies and does not create
                                                      	// new ones.
                                                      	ScalingPolicyUpdateBehavior ScalingPolicyUpdateBehavior
                                                      
                                                      	// The amount of time, in seconds, to buffer the run time of scheduled scaling
                                                      	// actions when scaling out. For example, if the forecast says to add capacity at
                                                      	// 10:00 AM, and the buffer time is 5 minutes, then the run time of the
                                                      	// corresponding scheduled scaling action will be 9:55 AM. The intention is to give
                                                      	// resources time to be provisioned. For example, it can take a few minutes to
                                                      	// launch an EC2 instance. The actual amount of time required depends on several
                                                      	// factors, such as the size of the instance and whether there are startup scripts
                                                      	// to complete. The value must be less than the forecast interval duration of 3600
                                                      	// seconds (60 minutes). The default is 300 seconds. Only valid when configuring
                                                      	// predictive scaling.
                                                      	ScheduledActionBufferTime *int32
                                                      }

                                                        Describes a scaling instruction for a scalable resource. The scaling instruction is used in combination with a scaling plan, which is a set of instructions for configuring dynamic scaling and predictive scaling for the scalable resources in your application. Each scaling instruction applies to one resource. AWS Auto Scaling creates target tracking scaling policies based on the scaling instructions. Target tracking scaling policies adjust the capacity of your scalable resource as required to maintain resource utilization at the target value that you specified. AWS Auto Scaling also configures predictive scaling for your Amazon EC2 Auto Scaling groups using a subset of parameters, including the load metric, the scaling metric, the target value for the scaling metric, the predictive scaling mode (forecast and scale or forecast only), and the desired behavior when the forecast capacity exceeds the maximum capacity of the resource. With predictive scaling, AWS Auto Scaling generates forecasts with traffic predictions for the two days ahead and schedules scaling actions that proactively add and remove resource capacity to match the forecast. We recommend waiting a minimum of 24 hours after creating an Auto Scaling group to configure predictive scaling. At minimum, there must be 24 hours of historical data to generate a forecast. For more information, see Getting Started with AWS Auto Scaling (https://docs.aws.amazon.com/autoscaling/plans/userguide/auto-scaling-getting-started.html).

                                                        type ScalingMetricType

                                                        type ScalingMetricType string
                                                        const (
                                                        	ScalingMetricTypeASGAverageCPUUtilization                 ScalingMetricType = "ASGAverageCPUUtilization"
                                                        	ScalingMetricTypeASGAverageNetworkIn                      ScalingMetricType = "ASGAverageNetworkIn"
                                                        	ScalingMetricTypeASGAverageNetworkOut                     ScalingMetricType = "ASGAverageNetworkOut"
                                                        	ScalingMetricTypeDynamoDBReadCapacityUtilization          ScalingMetricType = "DynamoDBReadCapacityUtilization"
                                                        	ScalingMetricTypeDynamoDBWriteCapacityUtilization         ScalingMetricType = "DynamoDBWriteCapacityUtilization"
                                                        	ScalingMetricTypeECSServiceAverageCPUUtilization          ScalingMetricType = "ECSServiceAverageCPUUtilization"
                                                        	ScalingMetricTypeECSServiceAverageMemoryUtilization       ScalingMetricType = "ECSServiceAverageMemoryUtilization"
                                                        	ScalingMetricTypeALBRequestCountPerTarget                 ScalingMetricType = "ALBRequestCountPerTarget"
                                                        	ScalingMetricTypeRDSReaderAverageCPUUtilization           ScalingMetricType = "RDSReaderAverageCPUUtilization"
                                                        	ScalingMetricTypeRDSReaderAverageDatabaseConnections      ScalingMetricType = "RDSReaderAverageDatabaseConnections"
                                                        	ScalingMetricTypeEC2SpotFleetRequestAverageCPUUtilization ScalingMetricType = "EC2SpotFleetRequestAverageCPUUtilization"
                                                        	ScalingMetricTypeEC2SpotFleetRequestAverageNetworkIn      ScalingMetricType = "EC2SpotFleetRequestAverageNetworkIn"
                                                        	ScalingMetricTypeEC2SpotFleetRequestAverageNetworkOut     ScalingMetricType = "EC2SpotFleetRequestAverageNetworkOut"
                                                        )

                                                          Enum values for ScalingMetricType

                                                          func (ScalingMetricType) Values

                                                            Values returns all known values for ScalingMetricType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                            type ScalingPlan

                                                            type ScalingPlan struct {
                                                            
                                                            	// The application source.
                                                            	//
                                                            	// This member is required.
                                                            	ApplicationSource *ApplicationSource
                                                            
                                                            	// The scaling instructions.
                                                            	//
                                                            	// This member is required.
                                                            	ScalingInstructions []ScalingInstruction
                                                            
                                                            	// The name of the scaling plan.
                                                            	//
                                                            	// This member is required.
                                                            	ScalingPlanName *string
                                                            
                                                            	// The version number of the scaling plan.
                                                            	//
                                                            	// This member is required.
                                                            	ScalingPlanVersion *int64
                                                            
                                                            	// The status of the scaling plan.
                                                            	//
                                                            	// * Active - The scaling plan is active.
                                                            	//
                                                            	// *
                                                            	// ActiveWithProblems - The scaling plan is active, but the scaling configuration
                                                            	// for one or more resources could not be applied.
                                                            	//
                                                            	// * CreationInProgress - The
                                                            	// scaling plan is being created.
                                                            	//
                                                            	// * CreationFailed - The scaling plan could not be
                                                            	// created.
                                                            	//
                                                            	// * DeletionInProgress - The scaling plan is being deleted.
                                                            	//
                                                            	// *
                                                            	// DeletionFailed - The scaling plan could not be deleted.
                                                            	//
                                                            	// * UpdateInProgress -
                                                            	// The scaling plan is being updated.
                                                            	//
                                                            	// * UpdateFailed - The scaling plan could not
                                                            	// be updated.
                                                            	//
                                                            	// This member is required.
                                                            	StatusCode ScalingPlanStatusCode
                                                            
                                                            	// The Unix time stamp when the scaling plan was created.
                                                            	CreationTime *time.Time
                                                            
                                                            	// A simple message about the current status of the scaling plan.
                                                            	StatusMessage *string
                                                            
                                                            	// The Unix time stamp when the scaling plan entered the current status.
                                                            	StatusStartTime *time.Time
                                                            }

                                                              Represents a scaling plan.

                                                              type ScalingPlanResource

                                                              type ScalingPlanResource struct {
                                                              
                                                              	// The ID of the resource. This string consists of the resource type and unique
                                                              	// identifier.
                                                              	//
                                                              	// * Auto Scaling group - The resource type is autoScalingGroup and
                                                              	// the unique identifier is the name of the Auto Scaling group. Example:
                                                              	// autoScalingGroup/my-asg.
                                                              	//
                                                              	// * ECS service - The resource type is service and the
                                                              	// unique identifier is the cluster name and service name. Example:
                                                              	// service/default/sample-webapp.
                                                              	//
                                                              	// * Spot Fleet request - The resource type is
                                                              	// spot-fleet-request and the unique identifier is the Spot Fleet request ID.
                                                              	// Example: spot-fleet-request/sfr-73fbd2ce-aa30-494c-8788-1cee4EXAMPLE.
                                                              	//
                                                              	// *
                                                              	// DynamoDB table - The resource type is table and the unique identifier is the
                                                              	// resource ID. Example: table/my-table.
                                                              	//
                                                              	// * DynamoDB global secondary index - The
                                                              	// resource type is index and the unique identifier is the resource ID. Example:
                                                              	// table/my-table/index/my-table-index.
                                                              	//
                                                              	// * Aurora DB cluster - The resource type is
                                                              	// cluster and the unique identifier is the cluster name. Example:
                                                              	// cluster:my-db-cluster.
                                                              	//
                                                              	// This member is required.
                                                              	ResourceId *string
                                                              
                                                              	// The scalable dimension for the resource.
                                                              	//
                                                              	// *
                                                              	// autoscaling:autoScalingGroup:DesiredCapacity - The desired capacity of an Auto
                                                              	// Scaling group.
                                                              	//
                                                              	// * ecs:service:DesiredCount - The desired task count of an ECS
                                                              	// service.
                                                              	//
                                                              	// * ec2:spot-fleet-request:TargetCapacity - The target capacity of a
                                                              	// Spot Fleet request.
                                                              	//
                                                              	// * dynamodb:table:ReadCapacityUnits - The provisioned read
                                                              	// capacity for a DynamoDB table.
                                                              	//
                                                              	// * dynamodb:table:WriteCapacityUnits - The
                                                              	// provisioned write capacity for a DynamoDB table.
                                                              	//
                                                              	// *
                                                              	// dynamodb:index:ReadCapacityUnits - The provisioned read capacity for a DynamoDB
                                                              	// global secondary index.
                                                              	//
                                                              	// * dynamodb:index:WriteCapacityUnits - The provisioned
                                                              	// write capacity for a DynamoDB global secondary index.
                                                              	//
                                                              	// *
                                                              	// rds:cluster:ReadReplicaCount - The count of Aurora Replicas in an Aurora DB
                                                              	// cluster. Available for Aurora MySQL-compatible edition and Aurora
                                                              	// PostgreSQL-compatible edition.
                                                              	//
                                                              	// This member is required.
                                                              	ScalableDimension ScalableDimension
                                                              
                                                              	// The name of the scaling plan.
                                                              	//
                                                              	// This member is required.
                                                              	ScalingPlanName *string
                                                              
                                                              	// The version number of the scaling plan.
                                                              	//
                                                              	// This member is required.
                                                              	ScalingPlanVersion *int64
                                                              
                                                              	// The scaling status of the resource.
                                                              	//
                                                              	// * Active - The scaling configuration is
                                                              	// active.
                                                              	//
                                                              	// * Inactive - The scaling configuration is not active because the
                                                              	// scaling plan is being created or the scaling configuration could not be applied.
                                                              	// Check the status message for more information.
                                                              	//
                                                              	// * PartiallyActive - The scaling
                                                              	// configuration is partially active because the scaling plan is being created or
                                                              	// deleted or the scaling configuration could not be fully applied. Check the
                                                              	// status message for more information.
                                                              	//
                                                              	// This member is required.
                                                              	ScalingStatusCode ScalingStatusCode
                                                              
                                                              	// The namespace of the AWS service.
                                                              	//
                                                              	// This member is required.
                                                              	ServiceNamespace ServiceNamespace
                                                              
                                                              	// The scaling policies.
                                                              	ScalingPolicies []ScalingPolicy
                                                              
                                                              	// A simple message about the current scaling status of the resource.
                                                              	ScalingStatusMessage *string
                                                              }

                                                                Represents a scalable resource.

                                                                type ScalingPlanStatusCode

                                                                type ScalingPlanStatusCode string
                                                                const (
                                                                	ScalingPlanStatusCodeActive             ScalingPlanStatusCode = "Active"
                                                                	ScalingPlanStatusCodeActiveWithProblems ScalingPlanStatusCode = "ActiveWithProblems"
                                                                	ScalingPlanStatusCodeCreationInProgress ScalingPlanStatusCode = "CreationInProgress"
                                                                	ScalingPlanStatusCodeCreationFailed     ScalingPlanStatusCode = "CreationFailed"
                                                                	ScalingPlanStatusCodeDeletionInProgress ScalingPlanStatusCode = "DeletionInProgress"
                                                                	ScalingPlanStatusCodeDeletionFailed     ScalingPlanStatusCode = "DeletionFailed"
                                                                	ScalingPlanStatusCodeUpdateInProgress   ScalingPlanStatusCode = "UpdateInProgress"
                                                                	ScalingPlanStatusCodeUpdateFailed       ScalingPlanStatusCode = "UpdateFailed"
                                                                )

                                                                  Enum values for ScalingPlanStatusCode

                                                                  func (ScalingPlanStatusCode) Values

                                                                    Values returns all known values for ScalingPlanStatusCode. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                    type ScalingPolicy

                                                                    type ScalingPolicy struct {
                                                                    
                                                                    	// The name of the scaling policy.
                                                                    	//
                                                                    	// This member is required.
                                                                    	PolicyName *string
                                                                    
                                                                    	// The type of scaling policy.
                                                                    	//
                                                                    	// This member is required.
                                                                    	PolicyType PolicyType
                                                                    
                                                                    	// The target tracking scaling policy. Includes support for predefined or
                                                                    	// customized metrics.
                                                                    	TargetTrackingConfiguration *TargetTrackingConfiguration
                                                                    }

                                                                      Represents a scaling policy.

                                                                      type ScalingPolicyUpdateBehavior

                                                                      type ScalingPolicyUpdateBehavior string
                                                                      const (
                                                                      	ScalingPolicyUpdateBehaviorKeepExternalPolicies    ScalingPolicyUpdateBehavior = "KeepExternalPolicies"
                                                                      	ScalingPolicyUpdateBehaviorReplaceExternalPolicies ScalingPolicyUpdateBehavior = "ReplaceExternalPolicies"
                                                                      )

                                                                        Enum values for ScalingPolicyUpdateBehavior

                                                                        func (ScalingPolicyUpdateBehavior) Values

                                                                          Values returns all known values for ScalingPolicyUpdateBehavior. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                          type ScalingStatusCode

                                                                          type ScalingStatusCode string
                                                                          const (
                                                                          	ScalingStatusCodeInactive        ScalingStatusCode = "Inactive"
                                                                          	ScalingStatusCodePartiallyActive ScalingStatusCode = "PartiallyActive"
                                                                          	ScalingStatusCodeActive          ScalingStatusCode = "Active"
                                                                          )

                                                                            Enum values for ScalingStatusCode

                                                                            func (ScalingStatusCode) Values

                                                                              Values returns all known values for ScalingStatusCode. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                              type ServiceNamespace

                                                                              type ServiceNamespace string
                                                                              const (
                                                                              	ServiceNamespaceAutoscaling ServiceNamespace = "autoscaling"
                                                                              	ServiceNamespaceEcs         ServiceNamespace = "ecs"
                                                                              	ServiceNamespaceEc2         ServiceNamespace = "ec2"
                                                                              	ServiceNamespaceRds         ServiceNamespace = "rds"
                                                                              	ServiceNamespaceDynamodb    ServiceNamespace = "dynamodb"
                                                                              )

                                                                                Enum values for ServiceNamespace

                                                                                func (ServiceNamespace) Values

                                                                                  Values returns all known values for ServiceNamespace. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                  type TagFilter

                                                                                  type TagFilter struct {
                                                                                  
                                                                                  	// The tag key.
                                                                                  	Key *string
                                                                                  
                                                                                  	// The tag values (0 to 20).
                                                                                  	Values []string
                                                                                  }

                                                                                    Represents a tag.

                                                                                    type TargetTrackingConfiguration

                                                                                    type TargetTrackingConfiguration struct {
                                                                                    
                                                                                    	// The target value for the metric. The range is 8.515920e-109 to 1.174271e+108
                                                                                    	// (Base 10) or 2e-360 to 2e360 (Base 2).
                                                                                    	//
                                                                                    	// This member is required.
                                                                                    	TargetValue *float64
                                                                                    
                                                                                    	// A customized metric. You can specify either a predefined metric or a customized
                                                                                    	// metric.
                                                                                    	CustomizedScalingMetricSpecification *CustomizedScalingMetricSpecification
                                                                                    
                                                                                    	// Indicates whether scale in by the target tracking scaling policy is disabled. If
                                                                                    	// the value is true, scale in is disabled and the target tracking scaling policy
                                                                                    	// doesn't remove capacity from the scalable resource. Otherwise, scale in is
                                                                                    	// enabled and the target tracking scaling policy can remove capacity from the
                                                                                    	// scalable resource. The default value is false.
                                                                                    	DisableScaleIn *bool
                                                                                    
                                                                                    	// The estimated time, in seconds, until a newly launched instance can contribute
                                                                                    	// to the CloudWatch metrics. This value is used only if the resource is an Auto
                                                                                    	// Scaling group.
                                                                                    	EstimatedInstanceWarmup *int32
                                                                                    
                                                                                    	// A predefined metric. You can specify either a predefined metric or a customized
                                                                                    	// metric.
                                                                                    	PredefinedScalingMetricSpecification *PredefinedScalingMetricSpecification
                                                                                    
                                                                                    	// The amount of time, in seconds, after a scale in activity completes before
                                                                                    	// another scale in activity can start. This value is not used if the scalable
                                                                                    	// resource is an Auto Scaling group. The cooldown period is used to block
                                                                                    	// subsequent scale in requests until it has expired. The intention is to scale in
                                                                                    	// conservatively to protect your application's availability. However, if another
                                                                                    	// alarm triggers a scale-out policy during the cooldown period after a scale-in,
                                                                                    	// AWS Auto Scaling scales out your scalable target immediately.
                                                                                    	ScaleInCooldown *int32
                                                                                    
                                                                                    	// The amount of time, in seconds, after a scale-out activity completes before
                                                                                    	// another scale-out activity can start. This value is not used if the scalable
                                                                                    	// resource is an Auto Scaling group. While the cooldown period is in effect, the
                                                                                    	// capacity that has been added by the previous scale-out event that initiated the
                                                                                    	// cooldown is calculated as part of the desired capacity for the next scale out.
                                                                                    	// The intention is to continuously (but not excessively) scale out.
                                                                                    	ScaleOutCooldown *int32
                                                                                    }

                                                                                      Describes a target tracking configuration to use with AWS Auto Scaling. Used with ScalingInstruction and ScalingPolicy.

                                                                                      type ValidationException

                                                                                      type ValidationException struct {
                                                                                      	Message *string
                                                                                      }

                                                                                        An exception was thrown for a validation issue. Review the parameters provided.

                                                                                        func (*ValidationException) Error

                                                                                        func (e *ValidationException) Error() string

                                                                                        func (*ValidationException) ErrorCode

                                                                                        func (e *ValidationException) ErrorCode() string

                                                                                        func (*ValidationException) ErrorFault

                                                                                        func (e *ValidationException) ErrorFault() smithy.ErrorFault

                                                                                        func (*ValidationException) ErrorMessage

                                                                                        func (e *ValidationException) ErrorMessage() string