types

package
v1.22.4 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 29, 2024 License: Apache-2.0 Imports: 3 Imported by: 1

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type AccessDeniedException 

type AccessDeniedException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

General authentication failure. The request was not signed correctly.

func (*AccessDeniedException) Error 

func (e *AccessDeniedException) Error() string

func (*AccessDeniedException) ErrorCode 

func (e *AccessDeniedException) ErrorCode() string

func (*AccessDeniedException) ErrorFault 

func (e *AccessDeniedException) ErrorFault() smithy.ErrorFault

func (*AccessDeniedException) ErrorMessage 

func (e *AccessDeniedException) ErrorMessage() string

type Artwork 

type Artwork struct {

	// The format of album art, if any. Valid formats are .jpg and .png .
	AlbumArtFormat *string

	// The encryption settings, if any, that you want Elastic Transcoder to apply to
	// your artwork.
	Encryption *Encryption

	// The name of the file to be used as album art. To determine which Amazon S3
	// bucket contains the specified file, Elastic Transcoder checks the pipeline
	// specified by PipelineId ; the InputBucket object in that pipeline identifies
	// the bucket. If the file name includes a prefix, for example, cooking/pie.jpg ,
	// include the prefix in the key. If the file isn't in the specified bucket,
	// Elastic Transcoder returns an error.
	InputKey *string

	// The maximum height of the output album art in pixels. If you specify auto ,
	// Elastic Transcoder uses 600 as the default value. If you specify a numeric
	// value, enter an even integer between 32 and 3072, inclusive.
	MaxHeight *string

	// The maximum width of the output album art in pixels. If you specify auto ,
	// Elastic Transcoder uses 600 as the default value. If you specify a numeric
	// value, enter an even integer between 32 and 4096, inclusive.
	MaxWidth *string

	// When you set PaddingPolicy to Pad , Elastic Transcoder may add white bars to the
	// top and bottom and/or left and right sides of the output album art to make the
	// total size of the output art match the values that you specified for MaxWidth
	// and MaxHeight .
	PaddingPolicy *string

	// Specify one of the following values to control scaling of the output album art:
	//   - Fit: Elastic Transcoder scales the output art so it matches the value that
	//   you specified in either MaxWidth or MaxHeight without exceeding the other
	//   value.
	//   - Fill: Elastic Transcoder scales the output art so it matches the value that
	//   you specified in either MaxWidth or MaxHeight and matches or exceeds the other
	//   value. Elastic Transcoder centers the output art and then crops it in the
	//   dimension (if any) that exceeds the maximum value.
	//   - Stretch: Elastic Transcoder stretches the output art to match the values
	//   that you specified for MaxWidth and MaxHeight . If the relative proportions of
	//   the input art and the output art are different, the output art will be
	//   distorted.
	//   - Keep: Elastic Transcoder does not scale the output art. If either dimension
	//   of the input art exceeds the values that you specified for MaxWidth and
	//   MaxHeight , Elastic Transcoder crops the output art.
	//   - ShrinkToFit: Elastic Transcoder scales the output art down so that its
	//   dimensions match the values that you specified for at least one of MaxWidth
	//   and MaxHeight without exceeding either value. If you specify this option,
	//   Elastic Transcoder does not scale the art up.
	//   - ShrinkToFill Elastic Transcoder scales the output art down so that its
	//   dimensions match the values that you specified for at least one of MaxWidth
	//   and MaxHeight without dropping below either value. If you specify this option,
	//   Elastic Transcoder does not scale the art up.
	SizingPolicy *string
	// contains filtered or unexported fields
}

The file to be used as album art. There can be multiple artworks associated with an audio file, to a maximum of 20. To remove artwork or leave the artwork empty, you can either set Artwork to null, or set the Merge Policy to "Replace" and use an empty Artwork array. To pass through existing artwork unchanged, set the Merge Policy to "Prepend", "Append", or "Fallback", and use an empty Artwork array.

type AudioCodecOptions 

type AudioCodecOptions struct {

	// You can only choose an audio bit depth when you specify flac or pcm for the
	// value of Audio:Codec. The bit depth of a sample is how many bits of information
	// are included in the audio samples. The higher the bit depth, the better the
	// audio, but the larger the file. Valid values are 16 and 24 . The most common bit
	// depth is 24 .
	BitDepth *string

	// You can only choose an audio bit order when you specify pcm for the value of
	// Audio:Codec. The order the bits of a PCM sample are stored in. The supported
	// value is LittleEndian .
	BitOrder *string

	// You can only choose an audio profile when you specify AAC for the value of
	// Audio:Codec. Specify the AAC profile for the output file. Elastic Transcoder
	// supports the following profiles:
	//   - auto : If you specify auto , Elastic Transcoder selects the profile based on
	//   the bit rate selected for the output file.
	//   - AAC-LC : The most common AAC profile. Use for bit rates larger than 64 kbps.
	//   - HE-AAC : Not supported on some older players and devices. Use for bit rates
	//   between 40 and 80 kbps.
	//   - HE-AACv2 : Not supported on some players and devices. Use for bit rates less
	//   than 48 kbps.
	// All outputs in a Smooth playlist must have the same value for Profile . If you
	// created any presets before AAC profiles were added, Elastic Transcoder
	// automatically updated your presets to use AAC-LC. You can change the value as
	// required.
	Profile *string

	// You can only choose whether an audio sample is signed when you specify pcm for
	// the value of Audio:Codec. Whether audio samples are represented with negative
	// and positive numbers (signed) or only positive numbers (unsigned). The supported
	// value is Signed .
	Signed *string
	// contains filtered or unexported fields
}

Options associated with your audio codec.

type AudioParameters 

type AudioParameters struct {

	// The method of organizing audio channels and tracks. Use Audio:Channels to
	// specify the number of channels in your output, and Audio:AudioPackingMode to
	// specify the number of tracks and their relation to the channels. If you do not
	// specify an Audio:AudioPackingMode , Elastic Transcoder uses SingleTrack . The
	// following values are valid: SingleTrack , OneChannelPerTrack , and
	// OneChannelPerTrackWithMosTo8Tracks When you specify SingleTrack , Elastic
	// Transcoder creates a single track for your output. The track can have up to
	// eight channels. Use SingleTrack for all non- mxf containers. The outputs of
	// SingleTrack for a specific channel value and inputs are as follows:
	//   - 0 channels with any input: Audio omitted from the output
	//   - 1, 2, or auto channels with no audio input: Audio omitted from the output
	//   - 1 channel with any input with audio: One track with one channel, downmixed
	//   if necessary
	//   - 2 channels with one track with one channel: One track with two identical
	//   channels
	//   - 2 or auto channels with two tracks with one channel each: One track with
	//   two channels
	//   - 2 or auto channels with one track with two channels: One track with two
	//   channels
	//   - 2 channels with one track with multiple channels: One track with two
	//   channels
	//   - auto channels with one track with one channel: One track with one channel
	//   - auto channels with one track with multiple channels: One track with
	//   multiple channels
	// When you specify OneChannelPerTrack , Elastic Transcoder creates a new track for
	// every channel in your output. Your output can have up to eight single-channel
	// tracks. The outputs of OneChannelPerTrack for a specific channel value and
	// inputs are as follows:
	//   - 0 channels with any input: Audio omitted from the output
	//   - 1, 2, or auto channels with no audio input: Audio omitted from the output
	//   - 1 channel with any input with audio: One track with one channel, downmixed
	//   if necessary
	//   - 2 channels with one track with one channel: Two tracks with one identical
	//   channel each
	//   - 2 or auto channels with two tracks with one channel each: Two tracks with
	//   one channel each
	//   - 2 or auto channels with one track with two channels: Two tracks with one
	//   channel each
	//   - 2 channels with one track with multiple channels: Two tracks with one
	//   channel each
	//   - auto channels with one track with one channel: One track with one channel
	//   - auto channels with one track with multiple channels: Up to eight tracks
	//   with one channel each
	// When you specify OneChannelPerTrackWithMosTo8Tracks , Elastic Transcoder creates
	// eight single-channel tracks for your output. All tracks that do not contain
	// audio data from an input channel are MOS, or Mit Out Sound, tracks. The outputs
	// of OneChannelPerTrackWithMosTo8Tracks for a specific channel value and inputs
	// are as follows:
	//   - 0 channels with any input: Audio omitted from the output
	//   - 1, 2, or auto channels with no audio input: Audio omitted from the output
	//   - 1 channel with any input with audio: One track with one channel, downmixed
	//   if necessary, plus six MOS tracks
	//   - 2 channels with one track with one channel: Two tracks with one identical
	//   channel each, plus six MOS tracks
	//   - 2 or auto channels with two tracks with one channel each: Two tracks with
	//   one channel each, plus six MOS tracks
	//   - 2 or auto channels with one track with two channels: Two tracks with one
	//   channel each, plus six MOS tracks
	//   - 2 channels with one track with multiple channels: Two tracks with one
	//   channel each, plus six MOS tracks
	//   - auto channels with one track with one channel: One track with one channel,
	//   plus seven MOS tracks
	//   - auto channels with one track with multiple channels: Up to eight tracks
	//   with one channel each, plus MOS tracks until there are eight tracks in all
	AudioPackingMode *string

	// The bit rate of the audio stream in the output file, in kilobits/second. Enter
	// an integer between 64 and 320, inclusive.
	BitRate *string

	// The number of audio channels in the output file. The following values are
	// valid: auto , 0 , 1 , 2 One channel carries the information played by a single
	// speaker. For example, a stereo track with two channels sends one channel to the
	// left speaker, and the other channel to the right speaker. The output channels
	// are organized into tracks. If you want Elastic Transcoder to automatically
	// detect the number of audio channels in the input file and use that value for the
	// output file, select auto . The output of a specific channel value and inputs are
	// as follows:
	//   - auto channel specified, with any input: Pass through up to eight input
	//   channels.
	//   - 0 channels specified, with any input: Audio omitted from the output.
	//   - 1 channel specified, with at least one input channel: Mono sound.
	//   - 2 channels specified, with any input: Two identical mono channels or stereo.
	//   For more information about tracks, see Audio:AudioPackingMode.
	// For more information about how Elastic Transcoder organizes channels and
	// tracks, see Audio:AudioPackingMode .
	Channels *string

	// The audio codec for the output file. Valid values include aac , flac , mp2 , mp3
	// , pcm , and vorbis .
	Codec *string

	// If you specified AAC for Audio:Codec , this is the AAC compression profile to
	// use. Valid values include: auto , AAC-LC , HE-AAC , HE-AACv2 If you specify auto
	// , Elastic Transcoder chooses a profile based on the bit rate of the output file.
	CodecOptions *AudioCodecOptions

	// The sample rate of the audio stream in the output file, in Hertz. Valid values
	// include: auto , 22050 , 32000 , 44100 , 48000 , 96000 If you specify auto ,
	// Elastic Transcoder automatically detects the sample rate.
	SampleRate *string
	// contains filtered or unexported fields
}

Parameters required for transcoding audio.

type CaptionFormat 

type CaptionFormat struct {

	// The encryption settings, if any, that you want Elastic Transcoder to apply to
	// your caption formats.
	Encryption *Encryption

	// The format you specify determines whether Elastic Transcoder generates an
	// embedded or sidecar caption for this output.
	//   - Valid Embedded Caption Formats:
	//   - for FLAC: None
	//   - For MP3: None
	//   - For MP4: mov-text
	//   - For MPEG-TS: None
	//   - For ogg: None
	//   - For webm: None
	//   - Valid Sidecar Caption Formats: Elastic Transcoder supports dfxp (first div
	//   element only), scc, srt, and webvtt. If you want ttml or smpte-tt compatible
	//   captions, specify dfxp as your output format.
	//   - For FMP4: dfxp
	//   - Non-FMP4 outputs: All sidecar types fmp4 captions have an extension of .ismt
	Format *string

	// The prefix for caption filenames, in the form description- {language} , where:
	//   - description is a description of the video.
	//   - {language} is a literal value that Elastic Transcoder replaces with the two-
	//   or three-letter code for the language of the caption in the output file names.
	// If you don't include {language} in the file name pattern, Elastic Transcoder
	// automatically appends " {language} " to the value that you specify for the
	// description. In addition, Elastic Transcoder automatically appends the count to
	// the end of the segment files. For example, suppose you're transcoding into srt
	// format. When you enter "Sydney-{language}-sunrise", and the language of the
	// captions is English (en), the name of the first caption file is be
	// Sydney-en-sunrise00000.srt.
	Pattern *string
	// contains filtered or unexported fields
}

The file format of the output captions. If you leave this value blank, Elastic Transcoder returns an error.

type CaptionSource 

type CaptionSource struct {

	// The encryption settings, if any, that Elastic Transcoder needs to decyrpt your
	// caption sources, or that you want Elastic Transcoder to apply to your caption
	// sources.
	Encryption *Encryption

	// The name of the sidecar caption file that you want Elastic Transcoder to
	// include in the output file.
	Key *string

	// The label of the caption shown in the player when choosing a language. We
	// recommend that you put the caption language name here, in the language of the
	// captions.
	Label *string

	// A string that specifies the language of the caption. If you specified multiple
	// inputs with captions, the caption language must match in order to be included in
	// the output. Specify this as one of:
	//   - 2-character ISO 639-1 code
	//   - 3-character ISO 639-2 code
	// For more information on ISO language codes and language names, see the List of
	// ISO 639-1 codes.
	Language *string

	// For clip generation or captions that do not start at the same time as the
	// associated video file, the TimeOffset tells Elastic Transcoder how much of the
	// video to encode before including captions. Specify the TimeOffset in the form
	// [+-]SS.sss or [+-]HH:mm:SS.ss.
	TimeOffset *string
	// contains filtered or unexported fields
}

A source file for the input sidecar captions used during the transcoding process.

type Captions 

type Captions struct {

	// The array of file formats for the output captions. If you leave this value
	// blank, Elastic Transcoder returns an error.
	CaptionFormats []CaptionFormat

	// Source files for the input sidecar captions used during the transcoding
	// process. To omit all sidecar captions, leave CaptionSources blank.
	//
	// Deprecated: This member has been deprecated.
	CaptionSources []CaptionSource

	// A policy that determines how Elastic Transcoder handles the existence of
	// multiple captions.
	//   - MergeOverride: Elastic Transcoder transcodes both embedded and sidecar
	//   captions into outputs. If captions for a language are embedded in the input file
	//   and also appear in a sidecar file, Elastic Transcoder uses the sidecar captions
	//   and ignores the embedded captions for that language.
	//   - MergeRetain: Elastic Transcoder transcodes both embedded and sidecar
	//   captions into outputs. If captions for a language are embedded in the input file
	//   and also appear in a sidecar file, Elastic Transcoder uses the embedded captions
	//   and ignores the sidecar captions for that language. If CaptionSources is
	//   empty, Elastic Transcoder omits all sidecar captions from the output files.
	//   - Override: Elastic Transcoder transcodes only the sidecar captions that you
	//   specify in CaptionSources .
	// MergePolicy cannot be null.
	//
	// Deprecated: This member has been deprecated.
	MergePolicy *string
	// contains filtered or unexported fields
}

The captions to be created, if any.

type Clip 

type Clip struct {

	// Settings that determine when a clip begins and how long it lasts.
	TimeSpan *TimeSpan
	// contains filtered or unexported fields
}

Settings for one clip in a composition. All jobs in a playlist must have the same clip settings.

type CreateJobOutput 

type CreateJobOutput struct {

	// Information about the album art that you want Elastic Transcoder to add to the
	// file during transcoding. You can specify up to twenty album artworks for each
	// output. Settings for each artwork must be defined in the job for the current
	// output.
	AlbumArt *JobAlbumArt

	// You can configure Elastic Transcoder to transcode captions, or subtitles, from
	// one format to another. All captions must be in UTF-8. Elastic Transcoder
	// supports two types of captions:
	//   - Embedded: Embedded captions are included in the same file as the audio and
	//   video. Elastic Transcoder supports only one embedded caption per language, to a
	//   maximum of 300 embedded captions per file. Valid input values include:
	//   CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first
	//   non-empty channel only), and mov-text Valid outputs include: mov-text Elastic
	//   Transcoder supports a maximum of one embedded format per output.
	//   - Sidecar: Sidecar captions are kept in a separate metadata file from the
	//   audio and video data. Sidecar captions require a player that is capable of
	//   understanding the relationship between the video file and the sidecar file.
	//   Elastic Transcoder supports only one sidecar caption per language, to a maximum
	//   of 20 sidecar captions per file. Valid input values include: dfxp (first div
	//   element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and
	//   webvtt Valid outputs include: dfxp (first div element only), scc , srt , and
	//   webvtt .
	// If you want ttml or smpte-tt compatible captions, specify dfxp as your output
	// format. Elastic Transcoder does not support OCR (Optical Character Recognition),
	// does not accept pictures as a valid input for captions, and is not available for
	// audio-only transcoding. Elastic Transcoder does not preserve text formatting
	// (for example, italics) during the transcoding process. To remove captions or
	// leave the captions empty, set Captions to null. To pass through existing
	// captions unchanged, set the MergePolicy to MergeRetain , and pass in a null
	// CaptionSources array. For more information on embedded files, see the Subtitles
	// Wikipedia page. For more information on sidecar files, see the Extensible
	// Metadata Platform and Sidecar file Wikipedia pages.
	Captions *Captions

	// You can create an output file that contains an excerpt from the input file.
	// This excerpt, called a clip, can come from the beginning, middle, or end of the
	// file. The Composition object contains settings for the clips that make up an
	// output file. For the current release, you can only specify settings for a single
	// clip per output file. The Composition object cannot be null.
	//
	// Deprecated: This member has been deprecated.
	Composition []Clip

	// You can specify encryption settings for any output files that you want to use
	// for a transcoding job. This includes the output file and any watermarks,
	// thumbnails, album art, or captions that you want to use. You must specify
	// encryption settings for each file individually.
	Encryption *Encryption

	// The name to assign to the transcoded file. Elastic Transcoder saves the file in
	// the Amazon S3 bucket specified by the OutputBucket object in the pipeline that
	// is specified by the pipeline ID. If a file with the specified name already
	// exists in the output bucket, the job fails.
	Key *string

	// The Id of the preset to use for this job. The preset determines the audio,
	// video, and thumbnail settings that Elastic Transcoder uses for transcoding.
	PresetId *string

	// The number of degrees clockwise by which you want Elastic Transcoder to rotate
	// the output relative to the input. Enter one of the following values: auto , 0 ,
	// 90 , 180 , 270 . The value auto generally works only if the file that you're
	// transcoding contains rotation metadata.
	Rotate *string

	// (Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in
	// PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts
	// (MPEG-TS), SegmentDuration is the target maximum duration of each segment in
	// seconds. For HLSv3 format playlists, each media segment is stored in a separate
	// .ts file. For HLSv4 and Smooth playlists, all media segments for an output are
	// stored in a single file. Each segment is approximately the length of the
	// SegmentDuration , though individual segments might be shorter or longer. The
	// range of valid values is 1 to 60 seconds. If the duration of the video is not
	// evenly divisible by SegmentDuration , the duration of the last segment is the
	// remainder of total length/SegmentDuration. Elastic Transcoder creates an
	// output-specific playlist for each output HLS output that you specify in
	// OutputKeys. To add an output to the master playlist for this job, include it in
	// the OutputKeys of the associated playlist.
	SegmentDuration *string

	// The encryption settings, if any, that you want Elastic Transcoder to apply to
	// your thumbnail.
	ThumbnailEncryption *Encryption

	// Whether you want Elastic Transcoder to create thumbnails for your videos and,
	// if so, how you want Elastic Transcoder to name the files. If you don't want
	// Elastic Transcoder to create thumbnails, specify "". If you do want Elastic
	// Transcoder to create thumbnails, specify the information that you want to
	// include in the file name for each thumbnail. You can specify the following
	// values in any sequence:
	//   - {count} (Required): If you want to create thumbnails, you must include
	//   {count} in the ThumbnailPattern object. Wherever you specify {count} , Elastic
	//   Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail
	//   file names. The number indicates where a given thumbnail appears in the sequence
	//   of thumbnails for a transcoded file. If you specify a literal value and/or
	//   {resolution} but you omit {count} , Elastic Transcoder returns a validation
	//   error and does not create the job.
	//   - Literal values (Optional): You can specify literal values anywhere in the
	//   ThumbnailPattern object. For example, you can include them as a file name
	//   prefix or as a delimiter between {resolution} and {count} .
	//   - {resolution} (Optional): If you want Elastic Transcoder to include the
	//   resolution in the file name, include {resolution} in the ThumbnailPattern
	//   object.
	// When creating thumbnails, Elastic Transcoder automatically saves the files in
	// the format (.jpg or .png) that appears in the preset that you specified in the
	// PresetID value of CreateJobOutput . Elastic Transcoder also appends the
	// applicable file name extension.
	ThumbnailPattern *string

	// Information about the watermarks that you want Elastic Transcoder to add to the
	// video during transcoding. You can specify up to four watermarks for each output.
	// Settings for each watermark must be defined in the preset for the current
	// output.
	Watermarks []JobWatermark
	// contains filtered or unexported fields
}

The CreateJobOutput structure.

type CreateJobPlaylist 

type CreateJobPlaylist struct {

	// The format of the output playlist. Valid formats include HLSv3 , HLSv4 , and
	// Smooth .
	Format *string

	// The HLS content protection settings, if any, that you want Elastic Transcoder
	// to apply to the output files associated with this playlist.
	HlsContentProtection *HlsContentProtection

	// The name that you want Elastic Transcoder to assign to the master playlist, for
	// example, nyc-vacation.m3u8. If the name includes a / character, the section of
	// the name before the last / must be identical for all Name objects. If you
	// create more than one master playlist, the values of all Name objects must be
	// unique. Elastic Transcoder automatically appends the relevant file extension to
	// the file name ( .m3u8 for HLSv3 and HLSv4 playlists, and .ism and .ismc for
	// Smooth playlists). If you include a file extension in Name , the file name will
	// have two extensions.
	Name *string

	// For each output in this job that you want to include in a master playlist, the
	// value of the Outputs:Key object.
	//   - If your output is not HLS or does not have a segment duration set, the name
	//   of the output file is a concatenation of OutputKeyPrefix and Outputs:Key :
	//   OutputKeyPrefix Outputs:Key
	//   - If your output is HLSv3 and has a segment duration set, or is not included
	//   in a playlist, Elastic Transcoder creates an output playlist file with a file
	//   extension of .m3u8 , and a series of .ts files that include a five-digit
	//   sequential counter beginning with 00000: OutputKeyPrefix Outputs:Key .m3u8
	//   OutputKeyPrefix Outputs:Key 00000.ts
	//   - If your output is HLSv4 , has a segment duration set, and is included in an
	//   HLSv4 playlist, Elastic Transcoder creates an output playlist file with a file
	//   extension of _v4.m3u8 . If the output is video, Elastic Transcoder also
	//   creates an output file with an extension of _iframe.m3u8 : OutputKeyPrefix
	//   Outputs:Key _v4.m3u8 OutputKeyPrefix Outputs:Key _iframe.m3u8 OutputKeyPrefix
	//   Outputs:Key .ts
	// Elastic Transcoder automatically appends the relevant file extension to the
	// file name. If you include a file extension in Output Key, the file name will
	// have two extensions. If you include more than one output in a playlist, any
	// segment duration settings, clip settings, or caption settings must be the same
	// for all outputs in the playlist. For Smooth playlists, the Audio:Profile ,
	// Video:Profile , and Video:FrameRate to Video:KeyframesMaxDist ratio must be the
	// same for all outputs.
	OutputKeys []string

	// The DRM settings, if any, that you want Elastic Transcoder to apply to the
	// output files associated with this playlist.
	PlayReadyDrm *PlayReadyDrm
	// contains filtered or unexported fields
}

Information about the master playlist.

type DetectedProperties 

type DetectedProperties struct {

	// The detected duration of the input file, in milliseconds.
	DurationMillis *int64

	// The detected file size of the input file, in bytes.
	FileSize *int64

	// The detected frame rate of the input file, in frames per second.
	FrameRate *string

	// The detected height of the input file, in pixels.
	Height *int32

	// The detected width of the input file, in pixels.
	Width *int32
	// contains filtered or unexported fields
}

The detected properties of the input file. Elastic Transcoder identifies these values from the input file.

type Encryption 

type Encryption struct {

	// The series of random bits created by a random bit generator, unique for every
	// encryption operation, that you used to encrypt your input files or that you want
	// Elastic Transcoder to use to encrypt your output files. The initialization
	// vector must be base64-encoded, and it must be exactly 16 bytes long before being
	// base64-encoded.
	InitializationVector *string

	// The data encryption key that you want Elastic Transcoder to use to encrypt your
	// output file, or that was used to encrypt your input file. The key must be
	// base64-encoded and it must be one of the following bit lengths before being
	// base64-encoded: 128 , 192 , or 256 . The key must also be encrypted by using the
	// Amazon Key Management Service.
	Key *string

	// The MD5 digest of the key that you used to encrypt your input file, or that you
	// want Elastic Transcoder to use to encrypt your output file. Elastic Transcoder
	// uses the key digest as a checksum to make sure your key was not corrupted in
	// transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes
	// long before being base64-encoded.
	KeyMd5 *string

	// The specific server-side encryption mode that you want Elastic Transcoder to
	// use when decrypting your input files or encrypting your output files. Elastic
	// Transcoder supports the following options:
	//   - s3: Amazon S3 creates and manages the keys used for encrypting your files.
	//   - s3-aws-kms: Amazon S3 calls the Amazon Key Management Service, which
	//   creates and manages the keys that are used for encrypting your files. If you
	//   specify s3-aws-kms and you don't want to use the default key, you must add the
	//   AWS-KMS key that you want to use to your pipeline.
	//   - aes-cbc-pkcs7: A padded cipher-block mode of operation originally used for
	//   HLS files.
	//   - aes-ctr: AES Counter Mode.
	//   - aes-gcm: AES Galois Counter Mode, a mode of operation that is an
	//   authenticated encryption format, meaning that a file, key, or initialization
	//   vector that has been tampered with fails the decryption process.
	// For all three AES options, you must provide the following settings, which must
	// be base64-encoded:
	//   - Key
	//   - Key MD5
	//   - Initialization Vector
	// For the AES modes, your private encryption keys and your unencrypted data are
	// never stored by AWS; therefore, it is important that you safely manage your
	// encryption keys. If you lose them, you won't be able to unencrypt your data.
	Mode *string
	// contains filtered or unexported fields
}

The encryption settings, if any, that are used for decrypting your input files or encrypting your output files. If your input file is encrypted, you must specify the mode that Elastic Transcoder uses to decrypt your file, otherwise you must specify the mode you want Elastic Transcoder to use to encrypt your output files.

type HlsContentProtection 

type HlsContentProtection struct {

	// If Elastic Transcoder is generating your key for you, you must leave this field
	// blank. The series of random bits created by a random bit generator, unique for
	// every encryption operation, that you want Elastic Transcoder to use to encrypt
	// your output files. The initialization vector must be base64-encoded, and it must
	// be exactly 16 bytes before being base64-encoded.
	InitializationVector *string

	// If you want Elastic Transcoder to generate a key for you, leave this field
	// blank. If you choose to supply your own key, you must encrypt the key by using
	// AWS KMS. The key must be base64-encoded, and it must be one of the following bit
	// lengths before being base64-encoded: 128 , 192 , or 256 .
	Key *string

	// If Elastic Transcoder is generating your key for you, you must leave this field
	// blank. The MD5 digest of the key that you want Elastic Transcoder to use to
	// encrypt your output file, and that you want Elastic Transcoder to use as a
	// checksum to make sure your key was not corrupted in transit. The key MD5 must be
	// base64-encoded, and it must be exactly 16 bytes before being base64- encoded.
	KeyMd5 *string

	// Specify whether you want Elastic Transcoder to write your HLS license key to an
	// Amazon S3 bucket. If you choose WithVariantPlaylists , LicenseAcquisitionUrl
	// must be left blank and Elastic Transcoder writes your data key into the same
	// bucket as the associated playlist.
	KeyStoragePolicy *string

	// The location of the license key required to decrypt your HLS playlist. The URL
	// must be an absolute path, and is referenced in the URI attribute of the
	// EXT-X-KEY metadata tag in the playlist file.
	LicenseAcquisitionUrl *string

	// The content protection method for your output. The only valid value is: aes-128
	// . This value is written into the method attribute of the EXT-X-KEY metadata tag
	// in the output playlist.
	Method *string
	// contains filtered or unexported fields
}

The HLS content protection settings, if any, that you want Elastic Transcoder to apply to your output files.

type IncompatibleVersionException 

type IncompatibleVersionException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

func (*IncompatibleVersionException) Error 

func (e *IncompatibleVersionException) Error() string

func (*IncompatibleVersionException) ErrorCode 

func (e *IncompatibleVersionException) ErrorCode() string

func (*IncompatibleVersionException) ErrorFault 

func (e *IncompatibleVersionException) ErrorFault() smithy.ErrorFault

func (*IncompatibleVersionException) ErrorMessage 

func (e *IncompatibleVersionException) ErrorMessage() string

type InputCaptions 

type InputCaptions struct {

	// Source files for the input sidecar captions used during the transcoding
	// process. To omit all sidecar captions, leave CaptionSources blank.
	CaptionSources []CaptionSource

	// A policy that determines how Elastic Transcoder handles the existence of
	// multiple captions.
	//   - MergeOverride: Elastic Transcoder transcodes both embedded and sidecar
	//   captions into outputs. If captions for a language are embedded in the input file
	//   and also appear in a sidecar file, Elastic Transcoder uses the sidecar captions
	//   and ignores the embedded captions for that language.
	//   - MergeRetain: Elastic Transcoder transcodes both embedded and sidecar
	//   captions into outputs. If captions for a language are embedded in the input file
	//   and also appear in a sidecar file, Elastic Transcoder uses the embedded captions
	//   and ignores the sidecar captions for that language. If CaptionSources is
	//   empty, Elastic Transcoder omits all sidecar captions from the output files.
	//   - Override: Elastic Transcoder transcodes only the sidecar captions that you
	//   specify in CaptionSources .
	// MergePolicy cannot be null.
	MergePolicy *string
	// contains filtered or unexported fields
}

The captions to be created, if any.

type InternalServiceException 

type InternalServiceException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

Elastic Transcoder encountered an unexpected exception while trying to fulfill the request.

func (*InternalServiceException) Error 

func (e *InternalServiceException) Error() string

func (*InternalServiceException) ErrorCode 

func (e *InternalServiceException) ErrorCode() string

func (*InternalServiceException) ErrorFault 

func (e *InternalServiceException) ErrorFault() smithy.ErrorFault

func (*InternalServiceException) ErrorMessage 

func (e *InternalServiceException) ErrorMessage() string

type Job 

type Job struct {

	// The Amazon Resource Name (ARN) for the job.
	Arn *string

	// The identifier that Elastic Transcoder assigned to the job. You use this value
	// to get settings for the job or to delete the job.
	Id *string

	// A section of the request or response body that provides information about the
	// file that is being transcoded.
	Input *JobInput

	// Information about the files that you're transcoding. If you specified multiple
	// files for this job, Elastic Transcoder stitches the files together to make one
	// output.
	Inputs []JobInput

	// If you specified one output for a job, information about that output. If you
	// specified multiple outputs for a job, the Output object lists information about
	// the first output. This duplicates the information that is listed for the first
	// output in the Outputs object. Outputs recommended instead. A section of the
	// request or response body that provides information about the transcoded (target)
	// file.
	Output *JobOutput

	// The value, if any, that you want Elastic Transcoder to prepend to the names of
	// all files that this job creates, including output files, thumbnails, and
	// playlists. We recommend that you add a / or some other delimiter to the end of
	// the OutputKeyPrefix .
	OutputKeyPrefix *string

	// Information about the output files. We recommend that you use the Outputs
	// syntax for all jobs, even when you want Elastic Transcoder to transcode a file
	// into only one format. Do not use both the Outputs and Output syntaxes in the
	// same request. You can create a maximum of 30 outputs per job. If you specify
	// more than one output for a job, Elastic Transcoder creates the files for each
	// output in the order in which you specify them in the job.
	Outputs []JobOutput

	// The Id of the pipeline that you want Elastic Transcoder to use for transcoding.
	// The pipeline determines several settings, including the Amazon S3 bucket from
	// which Elastic Transcoder gets the files to transcode and the bucket into which
	// Elastic Transcoder puts the transcoded files.
	PipelineId *string

	// Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in
	// PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts
	// (MPEG-TS), Playlists contains information about the master playlists that you
	// want Elastic Transcoder to create. The maximum number of master playlists in a
	// job is 30.
	Playlists []Playlist

	// The status of the job: Submitted , Progressing , Complete , Canceled , or Error .
	Status *string

	// Details about the timing of a job.
	Timing *Timing

	// User-defined metadata that you want to associate with an Elastic Transcoder
	// job. You specify metadata in key/value pairs, and you can add up to 10 key/value
	// pairs per job. Elastic Transcoder does not guarantee that key/value pairs are
	// returned in the same order in which you specify them. Metadata keys and values
	// must use characters from the following list:
	//   - 0-9
	//   - A-Z and a-z
	//   - Space
	//   - The following symbols: _.:/=+-%@
	UserMetadata map[string]string
	// contains filtered or unexported fields
}

A section of the response body that provides information about the job that is created.

type JobAlbumArt 

type JobAlbumArt struct {

	// The file to be used as album art. There can be multiple artworks associated
	// with an audio file, to a maximum of 20. Valid formats are .jpg and .png
	Artwork []Artwork

	// A policy that determines how Elastic Transcoder handles the existence of
	// multiple album artwork files.
	//   - Replace: The specified album art replaces any existing album art.
	//   - Prepend: The specified album art is placed in front of any existing album
	//   art.
	//   - Append: The specified album art is placed after any existing album art.
	//   - Fallback: If the original input file contains artwork, Elastic Transcoder
	//   uses that artwork for the output. If the original input does not contain
	//   artwork, Elastic Transcoder uses the specified album art file.
	MergePolicy *string
	// contains filtered or unexported fields
}

The .jpg or .png file associated with an audio file.

type JobInput 

type JobInput struct {

	// The aspect ratio of the input file. If you want Elastic Transcoder to
	// automatically detect the aspect ratio of the input file, specify auto . If you
	// want to specify the aspect ratio for the output file, enter one of the following
	// values: 1:1 , 4:3 , 3:2 , 16:9 If you specify a value other than auto , Elastic
	// Transcoder disables automatic detection of the aspect ratio.
	AspectRatio *string

	// The container type for the input file. If you want Elastic Transcoder to
	// automatically detect the container type of the input file, specify auto . If you
	// want to specify the container type for the input file, enter one of the
	// following values: 3gp , aac , asf , avi , divx , flv , m4a , mkv , mov , mp3 ,
	// mp4 , mpeg , mpeg-ps , mpeg-ts , mxf , ogg , vob , wav , webm
	Container *string

	// The detected properties of the input file.
	DetectedProperties *DetectedProperties

	// The encryption settings, if any, that are used for decrypting your input files.
	// If your input file is encrypted, you must specify the mode that Elastic
	// Transcoder uses to decrypt your file.
	Encryption *Encryption

	// The frame rate of the input file. If you want Elastic Transcoder to
	// automatically detect the frame rate of the input file, specify auto . If you
	// want to specify the frame rate for the input file, enter one of the following
	// values: 10 , 15 , 23.97 , 24 , 25 , 29.97 , 30 , 60 If you specify a value
	// other than auto , Elastic Transcoder disables automatic detection of the frame
	// rate.
	FrameRate *string

	// You can configure Elastic Transcoder to transcode captions, or subtitles, from
	// one format to another. All captions must be in UTF-8. Elastic Transcoder
	// supports two types of captions:
	//   - Embedded: Embedded captions are included in the same file as the audio and
	//   video. Elastic Transcoder supports only one embedded caption per language, to a
	//   maximum of 300 embedded captions per file. Valid input values include:
	//   CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first
	//   non-empty channel only), and mov-text Valid outputs include: mov-text Elastic
	//   Transcoder supports a maximum of one embedded format per output.
	//   - Sidecar: Sidecar captions are kept in a separate metadata file from the
	//   audio and video data. Sidecar captions require a player that is capable of
	//   understanding the relationship between the video file and the sidecar file.
	//   Elastic Transcoder supports only one sidecar caption per language, to a maximum
	//   of 20 sidecar captions per file. Valid input values include: dfxp (first div
	//   element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and
	//   webvtt Valid outputs include: dfxp (first div element only), scc , srt , and
	//   webvtt .
	// If you want ttml or smpte-tt compatible captions, specify dfxp as your output
	// format. Elastic Transcoder does not support OCR (Optical Character Recognition),
	// does not accept pictures as a valid input for captions, and is not available for
	// audio-only transcoding. Elastic Transcoder does not preserve text formatting
	// (for example, italics) during the transcoding process. To remove captions or
	// leave the captions empty, set Captions to null. To pass through existing
	// captions unchanged, set the MergePolicy to MergeRetain , and pass in a null
	// CaptionSources array. For more information on embedded files, see the Subtitles
	// Wikipedia page. For more information on sidecar files, see the Extensible
	// Metadata Platform and Sidecar file Wikipedia pages.
	InputCaptions *InputCaptions

	// Whether the input file is interlaced. If you want Elastic Transcoder to
	// automatically detect whether the input file is interlaced, specify auto . If you
	// want to specify whether the input file is interlaced, enter one of the following
	// values: true , false If you specify a value other than auto , Elastic Transcoder
	// disables automatic detection of interlacing.
	Interlaced *string

	// The name of the file to transcode. Elsewhere in the body of the JSON block is
	// the the ID of the pipeline to use for processing the job. The InputBucket
	// object in that pipeline tells Elastic Transcoder which Amazon S3 bucket to get
	// the file from. If the file name includes a prefix, such as cooking/lasagna.mpg ,
	// include the prefix in the key. If the file isn't in the specified bucket,
	// Elastic Transcoder returns an error.
	Key *string

	// This value must be auto , which causes Elastic Transcoder to automatically
	// detect the resolution of the input file.
	Resolution *string

	// Settings for clipping an input. Each input can have different clip settings.
	TimeSpan *TimeSpan
	// contains filtered or unexported fields
}

Information about the file that you're transcoding.

type JobOutput 

type JobOutput struct {

	// The album art to be associated with the output file, if any.
	AlbumArt *JobAlbumArt

	// If Elastic Transcoder used a preset with a ColorSpaceConversionMode to
	// transcode the output file, the AppliedColorSpaceConversion parameter shows the
	// conversion used. If no ColorSpaceConversionMode was defined in the preset, this
	// parameter is not be included in the job response.
	AppliedColorSpaceConversion *string

	// You can configure Elastic Transcoder to transcode captions, or subtitles, from
	// one format to another. All captions must be in UTF-8. Elastic Transcoder
	// supports two types of captions:
	//   - Embedded: Embedded captions are included in the same file as the audio and
	//   video. Elastic Transcoder supports only one embedded caption per language, to a
	//   maximum of 300 embedded captions per file. Valid input values include:
	//   CEA-608 (EIA-608 , first non-empty channel only), CEA-708 (EIA-708 , first
	//   non-empty channel only), and mov-text Valid outputs include: mov-text Elastic
	//   Transcoder supports a maximum of one embedded format per output.
	//   - Sidecar: Sidecar captions are kept in a separate metadata file from the
	//   audio and video data. Sidecar captions require a player that is capable of
	//   understanding the relationship between the video file and the sidecar file.
	//   Elastic Transcoder supports only one sidecar caption per language, to a maximum
	//   of 20 sidecar captions per file. Valid input values include: dfxp (first div
	//   element only), ebu-tt , scc , smpt , srt , ttml (first div element only), and
	//   webvtt Valid outputs include: dfxp (first div element only), scc , srt , and
	//   webvtt .
	// If you want ttml or smpte-tt compatible captions, specify dfxp as your output
	// format. Elastic Transcoder does not support OCR (Optical Character Recognition),
	// does not accept pictures as a valid input for captions, and is not available for
	// audio-only transcoding. Elastic Transcoder does not preserve text formatting
	// (for example, italics) during the transcoding process. To remove captions or
	// leave the captions empty, set Captions to null. To pass through existing
	// captions unchanged, set the MergePolicy to MergeRetain , and pass in a null
	// CaptionSources array. For more information on embedded files, see the Subtitles
	// Wikipedia page. For more information on sidecar files, see the Extensible
	// Metadata Platform and Sidecar file Wikipedia pages.
	Captions *Captions

	// You can create an output file that contains an excerpt from the input file.
	// This excerpt, called a clip, can come from the beginning, middle, or end of the
	// file. The Composition object contains settings for the clips that make up an
	// output file. For the current release, you can only specify settings for a single
	// clip per output file. The Composition object cannot be null.
	//
	// Deprecated: This member has been deprecated.
	Composition []Clip

	// Duration of the output file, in seconds.
	Duration *int64

	// Duration of the output file, in milliseconds.
	DurationMillis *int64

	// The encryption settings, if any, that you want Elastic Transcoder to apply to
	// your output files. If you choose to use encryption, you must specify a mode to
	// use. If you choose not to use encryption, Elastic Transcoder writes an
	// unencrypted file to your Amazon S3 bucket.
	Encryption *Encryption

	// File size of the output file, in bytes.
	FileSize *int64

	// Frame rate of the output file, in frames per second.
	FrameRate *string

	// Height of the output file, in pixels.
	Height *int32

	// A sequential counter, starting with 1, that identifies an output among the
	// outputs from the current job. In the Output syntax, this value is always 1.
	Id *string

	// The name to assign to the transcoded file. Elastic Transcoder saves the file in
	// the Amazon S3 bucket specified by the OutputBucket object in the pipeline that
	// is specified by the pipeline ID.
	Key *string

	// The value of the Id object for the preset that you want to use for this job.
	// The preset determines the audio, video, and thumbnail settings that Elastic
	// Transcoder uses for transcoding. To use a preset that you created, specify the
	// preset ID that Elastic Transcoder returned in the response when you created the
	// preset. You can also use the Elastic Transcoder system presets, which you can
	// get with ListPresets .
	PresetId *string

	// The number of degrees clockwise by which you want Elastic Transcoder to rotate
	// the output relative to the input. Enter one of the following values: auto , 0 ,
	// 90 , 180 , 270 The value auto generally works only if the file that you're
	// transcoding contains rotation metadata.
	Rotate *string

	// (Outputs in Fragmented MP4 or MPEG-TS format only. If you specify a preset in
	// PresetId for which the value of Container is fmp4 (Fragmented MP4) or ts
	// (MPEG-TS), SegmentDuration is the target maximum duration of each segment in
	// seconds. For HLSv3 format playlists, each media segment is stored in a separate
	// .ts file. For HLSv4 , MPEG-DASH , and Smooth playlists, all media segments for
	// an output are stored in a single file. Each segment is approximately the length
	// of the SegmentDuration , though individual segments might be shorter or longer.
	// The range of valid values is 1 to 60 seconds. If the duration of the video is
	// not evenly divisible by SegmentDuration , the duration of the last segment is
	// the remainder of total length/SegmentDuration. Elastic Transcoder creates an
	// output-specific playlist for each output HLS output that you specify in
	// OutputKeys. To add an output to the master playlist for this job, include it in
	// the OutputKeys of the associated playlist.
	SegmentDuration *string

	// The status of one output in a job. If you specified only one output for the
	// job, Outputs:Status is always the same as Job:Status . If you specified more
	// than one output:
	//   - Job:Status and Outputs:Status for all of the outputs is Submitted until
	//   Elastic Transcoder starts to process the first output.
	//   - When Elastic Transcoder starts to process the first output, Outputs:Status
	//   for that output and Job:Status both change to Progressing. For each output,
	//   the value of Outputs:Status remains Submitted until Elastic Transcoder starts
	//   to process the output.
	//   - Job:Status remains Progressing until all of the outputs reach a terminal
	//   status, either Complete or Error.
	//   - When all of the outputs reach a terminal status, Job:Status changes to
	//   Complete only if Outputs:Status for all of the outputs is Complete . If
	//   Outputs:Status for one or more outputs is Error , the terminal status for
	//   Job:Status is also Error .
	// The value of Status is one of the following: Submitted , Progressing , Complete
	// , Canceled , or Error .
	Status *string

	// Information that further explains Status .
	StatusDetail *string

	// The encryption settings, if any, that you want Elastic Transcoder to apply to
	// your thumbnail.
	ThumbnailEncryption *Encryption

	// Whether you want Elastic Transcoder to create thumbnails for your videos and,
	// if so, how you want Elastic Transcoder to name the files. If you don't want
	// Elastic Transcoder to create thumbnails, specify "". If you do want Elastic
	// Transcoder to create thumbnails, specify the information that you want to
	// include in the file name for each thumbnail. You can specify the following
	// values in any sequence:
	//   - {count} (Required): If you want to create thumbnails, you must include
	//   {count} in the ThumbnailPattern object. Wherever you specify {count} , Elastic
	//   Transcoder adds a five-digit sequence number (beginning with 00001) to thumbnail
	//   file names. The number indicates where a given thumbnail appears in the sequence
	//   of thumbnails for a transcoded file. If you specify a literal value and/or
	//   {resolution} but you omit {count} , Elastic Transcoder returns a validation
	//   error and does not create the job.
	//   - Literal values (Optional): You can specify literal values anywhere in the
	//   ThumbnailPattern object. For example, you can include them as a file name
	//   prefix or as a delimiter between {resolution} and {count} .
	//   - {resolution} (Optional): If you want Elastic Transcoder to include the
	//   resolution in the file name, include {resolution} in the ThumbnailPattern
	//   object.
	// When creating thumbnails, Elastic Transcoder automatically saves the files in
	// the format (.jpg or .png) that appears in the preset that you specified in the
	// PresetID value of CreateJobOutput . Elastic Transcoder also appends the
	// applicable file name extension.
	ThumbnailPattern *string

	// Information about the watermarks that you want Elastic Transcoder to add to the
	// video during transcoding. You can specify up to four watermarks for each output.
	// Settings for each watermark must be defined in the preset that you specify in
	// Preset for the current output. Watermarks are added to the output video in the
	// sequence in which you list them in the job output—the first watermark in the
	// list is added to the output video first, the second watermark in the list is
	// added next, and so on. As a result, if the settings in a preset cause Elastic
	// Transcoder to place all watermarks in the same location, the second watermark
	// that you add covers the first one, the third one covers the second, and the
	// fourth one covers the third.
	Watermarks []JobWatermark

	// Specifies the width of the output file in pixels.
	Width *int32
	// contains filtered or unexported fields
}

Outputs recommended instead. If you specified one output for a job, information about that output. If you specified multiple outputs for a job, the Output object lists information about the first output. This duplicates the information that is listed for the first output in the Outputs object.

type JobWatermark 

type JobWatermark struct {

	// The encryption settings, if any, that you want Elastic Transcoder to apply to
	// your watermarks.
	Encryption *Encryption

	// The name of the .png or .jpg file that you want to use for the watermark. To
	// determine which Amazon S3 bucket contains the specified file, Elastic Transcoder
	// checks the pipeline specified by Pipeline ; the Input Bucket object in that
	// pipeline identifies the bucket. If the file name includes a prefix, for example,
	// logos/128x64.png, include the prefix in the key. If the file isn't in the
	// specified bucket, Elastic Transcoder returns an error.
	InputKey *string

	// The ID of the watermark settings that Elastic Transcoder uses to add watermarks
	// to the video during transcoding. The settings are in the preset specified by
	// Preset for the current output. In that preset, the value of Watermarks Id tells
	// Elastic Transcoder which settings to use.
	PresetWatermarkId *string
	// contains filtered or unexported fields
}

Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency.

type LimitExceededException 

type LimitExceededException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

Too many operations for a given AWS account. For example, the number of pipelines exceeds the maximum allowed.

func (*LimitExceededException) Error 

func (e *LimitExceededException) Error() string

func (*LimitExceededException) ErrorCode 

func (e *LimitExceededException) ErrorCode() string

func (*LimitExceededException) ErrorFault 

func (e *LimitExceededException) ErrorFault() smithy.ErrorFault

func (*LimitExceededException) ErrorMessage 

func (e *LimitExceededException) ErrorMessage() string

type Notifications 

type Notifications struct {

	// The Amazon SNS topic that you want to notify when Elastic Transcoder has
	// finished processing the job.
	Completed *string

	// The Amazon SNS topic that you want to notify when Elastic Transcoder encounters
	// an error condition.
	Error *string

	// The Amazon Simple Notification Service (Amazon SNS) topic that you want to
	// notify when Elastic Transcoder has started to process the job.
	Progressing *string

	// The Amazon SNS topic that you want to notify when Elastic Transcoder encounters
	// a warning condition.
	Warning *string
	// contains filtered or unexported fields
}

The Amazon Simple Notification Service (Amazon SNS) topic or topics to notify in order to report job status. To receive notifications, you must also subscribe to the new topic in the Amazon SNS console.

type Permission 

type Permission struct {

	// The permission that you want to give to the AWS user that is listed in Grantee.
	// Valid values include:
	//   - READ : The grantee can read the thumbnails and metadata for thumbnails that
	//   Elastic Transcoder adds to the Amazon S3 bucket.
	//   - READ_ACP : The grantee can read the object ACL for thumbnails that Elastic
	//   Transcoder adds to the Amazon S3 bucket.
	//   - WRITE_ACP : The grantee can write the ACL for the thumbnails that Elastic
	//   Transcoder adds to the Amazon S3 bucket.
	//   - FULL_CONTROL : The grantee has READ, READ_ACP, and WRITE_ACP permissions for
	//   the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket.
	Access []string

	// The AWS user or group that you want to have access to transcoded files and
	// playlists. To identify the user or group, you can specify the canonical user ID
	// for an AWS account, an origin access identity for a CloudFront distribution, the
	// registered email address of an AWS account, or a predefined Amazon S3 group.
	Grantee *string

	// The type of value that appears in the Grantee object:
	//   - Canonical : Either the canonical user ID for an AWS account or an origin
	//   access identity for an Amazon CloudFront distribution. A canonical user ID is
	//   not the same as an AWS account number.
	//   - Email : The registered email address of an AWS account.
	//   - Group : One of the following predefined Amazon S3 groups: AllUsers ,
	//   AuthenticatedUsers , or LogDelivery .
	GranteeType *string
	// contains filtered or unexported fields
}

The Permission structure.

type Pipeline 

type Pipeline struct {

	// The Amazon Resource Name (ARN) for the pipeline.
	Arn *string

	// The AWS Key Management Service (AWS KMS) key that you want to use with this
	// pipeline. If you use either s3 or s3-aws-kms as your Encryption:Mode , you don't
	// need to provide a key with your job because a default key, known as an AWS-KMS
	// key, is created for you automatically. You need to provide an AWS-KMS key only
	// if you want to use a non-default AWS-KMS key, or if you are using an
	// Encryption:Mode of aes-cbc-pkcs7 , aes-ctr , or aes-gcm .
	AwsKmsKeyArn *string

	// Information about the Amazon S3 bucket in which you want Elastic Transcoder to
	// save transcoded files and playlists. Either you specify both ContentConfig and
	// ThumbnailConfig , or you specify OutputBucket .
	//   - Bucket: The Amazon S3 bucket in which you want Elastic Transcoder to save
	//   transcoded files and playlists.
	//   - Permissions: A list of the users and/or predefined Amazon S3 groups you
	//   want to have access to transcoded files and playlists, and the type of access
	//   that you want them to have.
	//   - GranteeType: The type of value that appears in the Grantee object:
	//   - Canonical : Either the canonical user ID for an AWS account or an origin
	//   access identity for an Amazon CloudFront distribution.
	//   - Email : The registered email address of an AWS account.
	//   - Group : One of the following predefined Amazon S3 groups: AllUsers ,
	//   AuthenticatedUsers , or LogDelivery .
	//   - Grantee : The AWS user or group that you want to have access to transcoded
	//   files and playlists.
	//   - Access : The permission that you want to give to the AWS user that is listed
	//   in Grantee . Valid values include:
	//   - READ : The grantee can read the objects and metadata for objects that
	//   Elastic Transcoder adds to the Amazon S3 bucket.
	//   - READ_ACP : The grantee can read the object ACL for objects that Elastic
	//   Transcoder adds to the Amazon S3 bucket.
	//   - WRITE_ACP : The grantee can write the ACL for the objects that Elastic
	//   Transcoder adds to the Amazon S3 bucket.
	//   - FULL_CONTROL : The grantee has READ , READ_ACP , and WRITE_ACP permissions
	//   for the objects that Elastic Transcoder adds to the Amazon S3 bucket.
	//   - StorageClass: The Amazon S3 storage class, Standard or ReducedRedundancy,
	//   that you want Elastic Transcoder to assign to the video files and playlists that
	//   it stores in your Amazon S3 bucket.
	ContentConfig *PipelineOutputConfig

	// The identifier for the pipeline. You use this value to identify the pipeline in
	// which you want to perform a variety of operations, such as creating a job or a
	// preset.
	Id *string

	// The Amazon S3 bucket from which Elastic Transcoder gets media files for
	// transcoding and the graphics files, if any, that you want to use for watermarks.
	InputBucket *string

	// The name of the pipeline. We recommend that the name be unique within the AWS
	// account, but uniqueness is not enforced. Constraints: Maximum 40 characters
	Name *string

	// The Amazon Simple Notification Service (Amazon SNS) topic that you want to
	// notify to report job status. To receive notifications, you must also subscribe
	// to the new topic in the Amazon SNS console.
	//   - Progressing (optional): The Amazon Simple Notification Service (Amazon SNS)
	//   topic that you want to notify when Elastic Transcoder has started to process the
	//   job.
	//   - Complete (optional): The Amazon SNS topic that you want to notify when
	//   Elastic Transcoder has finished processing the job.
	//   - Warning (optional): The Amazon SNS topic that you want to notify when
	//   Elastic Transcoder encounters a warning condition.
	//   - Error (optional): The Amazon SNS topic that you want to notify when Elastic
	//   Transcoder encounters an error condition.
	Notifications *Notifications

	// The Amazon S3 bucket in which you want Elastic Transcoder to save transcoded
	// files, thumbnails, and playlists. Either you specify this value, or you specify
	// both ContentConfig and ThumbnailConfig .
	OutputBucket *string

	// The IAM Amazon Resource Name (ARN) for the role that Elastic Transcoder uses to
	// transcode jobs for this pipeline.
	Role *string

	// The current status of the pipeline:
	//   - Active : The pipeline is processing jobs.
	//   - Paused : The pipeline is not currently processing jobs.
	Status *string

	// Information about the Amazon S3 bucket in which you want Elastic Transcoder to
	// save thumbnail files. Either you specify both ContentConfig and ThumbnailConfig
	// , or you specify OutputBucket .
	//   - Bucket : The Amazon S3 bucket in which you want Elastic Transcoder to save
	//   thumbnail files.
	//   - Permissions : A list of the users and/or predefined Amazon S3 groups you
	//   want to have access to thumbnail files, and the type of access that you want
	//   them to have.
	//   - GranteeType: The type of value that appears in the Grantee object:
	//   - Canonical : Either the canonical user ID for an AWS account or an origin
	//   access identity for an Amazon CloudFront distribution. A canonical user ID is
	//   not the same as an AWS account number.
	//   - Email : The registered email address of an AWS account.
	//   - Group : One of the following predefined Amazon S3 groups: AllUsers ,
	//   AuthenticatedUsers , or LogDelivery .
	//   - Grantee : The AWS user or group that you want to have access to thumbnail
	//   files.
	//   - Access: The permission that you want to give to the AWS user that is listed
	//   in Grantee. Valid values include:
	//   - READ : The grantee can read the thumbnails and metadata for thumbnails that
	//   Elastic Transcoder adds to the Amazon S3 bucket.
	//   - READ_ACP : The grantee can read the object ACL for thumbnails that Elastic
	//   Transcoder adds to the Amazon S3 bucket.
	//   - WRITE_ACP : The grantee can write the ACL for the thumbnails that Elastic
	//   Transcoder adds to the Amazon S3 bucket.
	//   - FULL_CONTROL : The grantee has READ, READ_ACP, and WRITE_ACP permissions for
	//   the thumbnails that Elastic Transcoder adds to the Amazon S3 bucket.
	//   - StorageClass : The Amazon S3 storage class, Standard or ReducedRedundancy ,
	//   that you want Elastic Transcoder to assign to the thumbnails that it stores in
	//   your Amazon S3 bucket.
	ThumbnailConfig *PipelineOutputConfig
	// contains filtered or unexported fields
}

The pipeline (queue) that is used to manage jobs.

type PipelineOutputConfig 

type PipelineOutputConfig struct {

	// The Amazon S3 bucket in which you want Elastic Transcoder to save the
	// transcoded files. Specify this value when all of the following are true:
	//   - You want to save transcoded files, thumbnails (if any), and playlists (if
	//   any) together in one bucket.
	//   - You do not want to specify the users or groups who have access to the
	//   transcoded files, thumbnails, and playlists.
	//   - You do not want to specify the permissions that Elastic Transcoder grants
	//   to the files.
	//   - You want to associate the transcoded files and thumbnails with the Amazon
	//   S3 Standard storage class.
	// If you want to save transcoded files and playlists in one bucket and thumbnails
	// in another bucket, specify which users can access the transcoded files or the
	// permissions the users have, or change the Amazon S3 storage class, omit
	// OutputBucket and specify values for ContentConfig and ThumbnailConfig instead.
	Bucket *string

	// Optional. The Permissions object specifies which users and/or predefined Amazon
	// S3 groups you want to have access to transcoded files and playlists, and the
	// type of access you want them to have. You can grant permissions to a maximum of
	// 30 users and/or predefined Amazon S3 groups. If you include Permissions ,
	// Elastic Transcoder grants only the permissions that you specify. It does not
	// grant full permissions to the owner of the role specified by Role . If you want
	// that user to have full control, you must explicitly grant full control to the
	// user. If you omit Permissions , Elastic Transcoder grants full control over the
	// transcoded files and playlists to the owner of the role specified by Role , and
	// grants no other permissions to any other user or group.
	Permissions []Permission

	// The Amazon S3 storage class, Standard or ReducedRedundancy , that you want
	// Elastic Transcoder to assign to the video files and playlists that it stores in
	// your Amazon S3 bucket.
	StorageClass *string
	// contains filtered or unexported fields
}

The PipelineOutputConfig structure.

type PlayReadyDrm 

type PlayReadyDrm struct {

	// The type of DRM, if any, that you want Elastic Transcoder to apply to the
	// output files associated with this playlist.
	Format *string

	// The series of random bits created by a random bit generator, unique for every
	// encryption operation, that you want Elastic Transcoder to use to encrypt your
	// files. The initialization vector must be base64-encoded, and it must be exactly
	// 8 bytes long before being base64-encoded. If no initialization vector is
	// provided, Elastic Transcoder generates one for you.
	InitializationVector *string

	// The DRM key for your file, provided by your DRM license provider. The key must
	// be base64-encoded, and it must be one of the following bit lengths before being
	// base64-encoded: 128 , 192 , or 256 . The key must also be encrypted by using AWS
	// KMS.
	Key *string

	// The ID for your DRM key, so that your DRM license provider knows which key to
	// provide. The key ID must be provided in big endian, and Elastic Transcoder
	// converts it to little endian before inserting it into the PlayReady DRM headers.
	// If you are unsure whether your license server provides your key ID in big or
	// little endian, check with your DRM provider.
	KeyId *string

	// The MD5 digest of the key used for DRM on your file, and that you want Elastic
	// Transcoder to use as a checksum to make sure your key was not corrupted in
	// transit. The key MD5 must be base64-encoded, and it must be exactly 16 bytes
	// before being base64-encoded.
	KeyMd5 *string

	// The location of the license key required to play DRM content. The URL must be
	// an absolute path, and is referenced by the PlayReady header. The PlayReady
	// header is referenced in the protection header of the client manifest for Smooth
	// Streaming outputs, and in the EXT-X-DXDRM and EXT-XDXDRMINFO metadata tags for
	// HLS playlist outputs. An example URL looks like this:
	// https://www.example.com/exampleKey/
	LicenseAcquisitionUrl *string
	// contains filtered or unexported fields
}

The PlayReady DRM settings, if any, that you want Elastic Transcoder to apply to the output files associated with this playlist. PlayReady DRM encrypts your media files using aes-ctr encryption. If you use DRM for an HLSv3 playlist, your outputs must have a master playlist.

type Playlist 

type Playlist struct {

	// The format of the output playlist. Valid formats include HLSv3 , HLSv4 , and
	// Smooth .
	Format *string

	// The HLS content protection settings, if any, that you want Elastic Transcoder
	// to apply to the output files associated with this playlist.
	HlsContentProtection *HlsContentProtection

	// The name that you want Elastic Transcoder to assign to the master playlist, for
	// example, nyc-vacation.m3u8. If the name includes a / character, the section of
	// the name before the last / must be identical for all Name objects. If you
	// create more than one master playlist, the values of all Name objects must be
	// unique. Elastic Transcoder automatically appends the relevant file extension to
	// the file name ( .m3u8 for HLSv3 and HLSv4 playlists, and .ism and .ismc for
	// Smooth playlists). If you include a file extension in Name , the file name will
	// have two extensions.
	Name *string

	// For each output in this job that you want to include in a master playlist, the
	// value of the Outputs:Key object.
	//   - If your output is not HLS or does not have a segment duration set, the name
	//   of the output file is a concatenation of OutputKeyPrefix and Outputs:Key :
	//   OutputKeyPrefix Outputs:Key
	//   - If your output is HLSv3 and has a segment duration set, or is not included
	//   in a playlist, Elastic Transcoder creates an output playlist file with a file
	//   extension of .m3u8 , and a series of .ts files that include a five-digit
	//   sequential counter beginning with 00000: OutputKeyPrefix Outputs:Key .m3u8
	//   OutputKeyPrefix Outputs:Key 00000.ts
	//   - If your output is HLSv4 , has a segment duration set, and is included in an
	//   HLSv4 playlist, Elastic Transcoder creates an output playlist file with a file
	//   extension of _v4.m3u8 . If the output is video, Elastic Transcoder also
	//   creates an output file with an extension of _iframe.m3u8 : OutputKeyPrefix
	//   Outputs:Key _v4.m3u8 OutputKeyPrefix Outputs:Key _iframe.m3u8 OutputKeyPrefix
	//   Outputs:Key .ts
	// Elastic Transcoder automatically appends the relevant file extension to the
	// file name. If you include a file extension in Output Key, the file name will
	// have two extensions.
	//
	// If you include more than one output in a playlist, any segment duration
	// settings, clip settings, or caption settings must be the same for all outputs in
	// the playlist. For Smooth playlists, the Audio:Profile , Video:Profile , and
	// Video:FrameRate to Video:KeyframesMaxDist ratio must be the same for all
	// outputs.
	OutputKeys []string

	// The DRM settings, if any, that you want Elastic Transcoder to apply to the
	// output files associated with this playlist.
	PlayReadyDrm *PlayReadyDrm

	// The status of the job with which the playlist is associated.
	Status *string

	// Information that further explains the status.
	StatusDetail *string
	// contains filtered or unexported fields
}

Use Only for Fragmented MP4 or MPEG-TS Outputs. If you specify a preset for which the value of Container is fmp4 (Fragmented MP4) or ts (MPEG-TS), Playlists contains information about the master playlists that you want Elastic Transcoder to create. We recommend that you create only one master playlist per output format. The maximum number of master playlists in a job is 30.

type Preset 

type Preset struct {

	// The Amazon Resource Name (ARN) for the preset.
	Arn *string

	// A section of the response body that provides information about the audio preset
	// values.
	Audio *AudioParameters

	// The container type for the output file. Valid values include flac , flv , fmp4 ,
	// gif , mp3 , mp4 , mpg , mxf , oga , ogg , ts , and webm .
	Container *string

	// A description of the preset.
	Description *string

	// Identifier for the new preset. You use this value to get settings for the
	// preset or to delete it.
	Id *string

	// The name of the preset.
	Name *string

	// A section of the response body that provides information about the thumbnail
	// preset values, if any.
	Thumbnails *Thumbnails

	// Whether the preset is a default preset provided by Elastic Transcoder ( System )
	// or a preset that you have defined ( Custom ).
	Type *string

	// A section of the response body that provides information about the video preset
	// values.
	Video *VideoParameters
	// contains filtered or unexported fields
}

Presets are templates that contain most of the settings for transcoding media files from one format to another. Elastic Transcoder includes some default presets for common formats, for example, several iPod and iPhone versions. You can also create your own presets for formats that aren't included among the default presets. You specify which preset you want to use when you create a job.

type PresetWatermark 

type PresetWatermark struct {

	// The horizontal position of the watermark unless you specify a non-zero value
	// for HorizontalOffset :
	//   - Left: The left edge of the watermark is aligned with the left border of the
	//   video.
	//   - Right: The right edge of the watermark is aligned with the right border of
	//   the video.
	//   - Center: The watermark is centered between the left and right borders.
	HorizontalAlign *string

	// The amount by which you want the horizontal position of the watermark to be
	// offset from the position specified by HorizontalAlign:
	//   - number of pixels (px): The minimum value is 0 pixels, and the maximum value
	//   is the value of MaxWidth.
	//   - integer percentage (%): The range of valid values is 0 to 100.
	// For example, if you specify Left for HorizontalAlign and 5px for
	// HorizontalOffset , the left side of the watermark appears 5 pixels from the left
	// border of the output video. HorizontalOffset is only valid when the value of
	// HorizontalAlign is Left or Right . If you specify an offset that causes the
	// watermark to extend beyond the left or right border and Elastic Transcoder has
	// not added black bars, the watermark is cropped. If Elastic Transcoder has added
	// black bars, the watermark extends into the black bars. If the watermark extends
	// beyond the black bars, it is cropped. Use the value of Target to specify
	// whether you want to include the black bars that are added by Elastic Transcoder,
	// if any, in the offset calculation.
	HorizontalOffset *string

	// A unique identifier for the settings for one watermark. The value of Id can be
	// up to 40 characters long.
	Id *string

	// The maximum height of the watermark in one of the following formats:
	//   - number of pixels (px): The minimum value is 16 pixels, and the maximum
	//   value is the value of MaxHeight .
	//   - integer percentage (%): The range of valid values is 0 to 100. Use the
	//   value of Target to specify whether you want Elastic Transcoder to include the
	//   black bars that are added by Elastic Transcoder, if any, in the calculation.
	// If you specify the value in pixels, it must be less than or equal to the value
	// of MaxHeight .
	MaxHeight *string

	// The maximum width of the watermark in one of the following formats:
	//   - number of pixels (px): The minimum value is 16 pixels, and the maximum
	//   value is the value of MaxWidth .
	//   - integer percentage (%): The range of valid values is 0 to 100. Use the
	//   value of Target to specify whether you want Elastic Transcoder to include the
	//   black bars that are added by Elastic Transcoder, if any, in the calculation. If
	//   you specify the value in pixels, it must be less than or equal to the value of
	//   MaxWidth .
	MaxWidth *string

	// A percentage that indicates how much you want a watermark to obscure the video
	// in the location where it appears. Valid values are 0 (the watermark is
	// invisible) to 100 (the watermark completely obscures the video in the specified
	// location). The datatype of Opacity is float. Elastic Transcoder supports
	// transparent .png graphics. If you use a transparent .png, the transparent
	// portion of the video appears as if you had specified a value of 0 for Opacity .
	// The .jpg file format doesn't support transparency.
	Opacity *string

	// A value that controls scaling of the watermark:
	//   - Fit: Elastic Transcoder scales the watermark so it matches the value that
	//   you specified in either MaxWidth or MaxHeight without exceeding the other
	//   value.
	//   - Stretch: Elastic Transcoder stretches the watermark to match the values
	//   that you specified for MaxWidth and MaxHeight . If the relative proportions of
	//   the watermark and the values of MaxWidth and MaxHeight are different, the
	//   watermark will be distorted.
	//   - ShrinkToFit: Elastic Transcoder scales the watermark down so that its
	//   dimensions match the values that you specified for at least one of MaxWidth
	//   and MaxHeight without exceeding either value. If you specify this option,
	//   Elastic Transcoder does not scale the watermark up.
	SizingPolicy *string

	// A value that determines how Elastic Transcoder interprets values that you
	// specified for HorizontalOffset , VerticalOffset , MaxWidth , and MaxHeight :
	//   - Content: HorizontalOffset and VerticalOffset values are calculated based on
	//   the borders of the video excluding black bars added by Elastic Transcoder, if
	//   any. In addition, MaxWidth and MaxHeight , if specified as a percentage, are
	//   calculated based on the borders of the video excluding black bars added by
	//   Elastic Transcoder, if any.
	//   - Frame: HorizontalOffset and VerticalOffset values are calculated based on
	//   the borders of the video including black bars added by Elastic Transcoder, if
	//   any. In addition, MaxWidth and MaxHeight , if specified as a percentage, are
	//   calculated based on the borders of the video including black bars added by
	//   Elastic Transcoder, if any.
	Target *string

	// The vertical position of the watermark unless you specify a non-zero value for
	// VerticalOffset :
	//   - Top: The top edge of the watermark is aligned with the top border of the
	//   video.
	//   - Bottom: The bottom edge of the watermark is aligned with the bottom border
	//   of the video.
	//   - Center: The watermark is centered between the top and bottom borders.
	VerticalAlign *string

	// VerticalOffset The amount by which you want the vertical position of the
	// watermark to be offset from the position specified by VerticalAlign:
	//   - number of pixels (px): The minimum value is 0 pixels, and the maximum value
	//   is the value of MaxHeight .
	//   - integer percentage (%): The range of valid values is 0 to 100.
	// For example, if you specify Top for VerticalAlign and 5px for VerticalOffset ,
	// the top of the watermark appears 5 pixels from the top border of the output
	// video. VerticalOffset is only valid when the value of VerticalAlign is Top or
	// Bottom. If you specify an offset that causes the watermark to extend beyond the
	// top or bottom border and Elastic Transcoder has not added black bars, the
	// watermark is cropped. If Elastic Transcoder has added black bars, the watermark
	// extends into the black bars. If the watermark extends beyond the black bars, it
	// is cropped. Use the value of Target to specify whether you want Elastic
	// Transcoder to include the black bars that are added by Elastic Transcoder, if
	// any, in the offset calculation.
	VerticalOffset *string
	// contains filtered or unexported fields
}

Settings for the size, location, and opacity of graphics that you want Elastic Transcoder to overlay over videos that are transcoded using this preset. You can specify settings for up to four watermarks. Watermarks appear in the specified size and location, and with the specified opacity for the duration of the transcoded video. Watermarks can be in .png or .jpg format. If you want to display a watermark that is not rectangular, use the .png format, which supports transparency. When you create a job that uses this preset, you specify the .png or .jpg graphics that you want Elastic Transcoder to include in the transcoded videos. You can specify fewer graphics in the job than you specify watermark settings in the preset, which allows you to use the same preset for up to four watermarks that have different dimensions.

type ResourceInUseException 

type ResourceInUseException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

The resource you are attempting to change is in use. For example, you are attempting to delete a pipeline that is currently in use.

func (*ResourceInUseException) Error 

func (e *ResourceInUseException) Error() string

func (*ResourceInUseException) ErrorCode 

func (e *ResourceInUseException) ErrorCode() string

func (*ResourceInUseException) ErrorFault 

func (e *ResourceInUseException) ErrorFault() smithy.ErrorFault

func (*ResourceInUseException) ErrorMessage 

func (e *ResourceInUseException) ErrorMessage() string

type ResourceNotFoundException 

type ResourceNotFoundException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

The requested resource does not exist or is not available. For example, the pipeline to which you're trying to add a job doesn't exist or is still being created.

func (*ResourceNotFoundException) Error 

func (e *ResourceNotFoundException) Error() string

func (*ResourceNotFoundException) ErrorCode 

func (e *ResourceNotFoundException) ErrorCode() string

func (*ResourceNotFoundException) ErrorFault 

func (e *ResourceNotFoundException) ErrorFault() smithy.ErrorFault

func (*ResourceNotFoundException) ErrorMessage 

func (e *ResourceNotFoundException) ErrorMessage() string

type Thumbnails 

type Thumbnails struct {

	// To better control resolution and aspect ratio of thumbnails, we recommend that
	// you use the values MaxWidth , MaxHeight , SizingPolicy , and PaddingPolicy
	// instead of Resolution and AspectRatio . The two groups of settings are mutually
	// exclusive. Do not use them together. The aspect ratio of thumbnails. Valid
	// values include: auto , 1:1 , 4:3 , 3:2 , 16:9 If you specify auto , Elastic
	// Transcoder tries to preserve the aspect ratio of the video in the output file.
	AspectRatio *string

	// The format of thumbnails, if any. Valid values are jpg and png . You specify
	// whether you want Elastic Transcoder to create thumbnails when you create a job.
	Format *string

	// The approximate number of seconds between thumbnails. Specify an integer value.
	Interval *string

	// The maximum height of thumbnails in pixels. If you specify auto, Elastic
	// Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric
	// value, enter an even integer between 32 and 3072.
	MaxHeight *string

	// The maximum width of thumbnails in pixels. If you specify auto, Elastic
	// Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric
	// value, enter an even integer between 32 and 4096.
	MaxWidth *string

	// When you set PaddingPolicy to Pad , Elastic Transcoder may add black bars to the
	// top and bottom and/or left and right sides of thumbnails to make the total size
	// of the thumbnails match the values that you specified for thumbnail MaxWidth
	// and MaxHeight settings.
	PaddingPolicy *string

	// To better control resolution and aspect ratio of thumbnails, we recommend that
	// you use the values MaxWidth , MaxHeight , SizingPolicy , and PaddingPolicy
	// instead of Resolution and AspectRatio . The two groups of settings are mutually
	// exclusive. Do not use them together. The width and height of thumbnail files in
	// pixels. Specify a value in the format width  x  height  where both values are
	// even integers. The values cannot exceed the width and height that you specified
	// in the Video:Resolution object.
	Resolution *string

	// Specify one of the following values to control scaling of thumbnails:
	//   - Fit : Elastic Transcoder scales thumbnails so they match the value that you
	//   specified in thumbnail MaxWidth or MaxHeight settings without exceeding the
	//   other value.
	//   - Fill : Elastic Transcoder scales thumbnails so they match the value that you
	//   specified in thumbnail MaxWidth or MaxHeight settings and matches or exceeds
	//   the other value. Elastic Transcoder centers the image in thumbnails and then
	//   crops in the dimension (if any) that exceeds the maximum value.
	//   - Stretch : Elastic Transcoder stretches thumbnails to match the values that
	//   you specified for thumbnail MaxWidth and MaxHeight settings. If the relative
	//   proportions of the input video and thumbnails are different, the thumbnails will
	//   be distorted.
	//   - Keep : Elastic Transcoder does not scale thumbnails. If either dimension of
	//   the input video exceeds the values that you specified for thumbnail MaxWidth
	//   and MaxHeight settings, Elastic Transcoder crops the thumbnails.
	//   - ShrinkToFit : Elastic Transcoder scales thumbnails down so that their
	//   dimensions match the values that you specified for at least one of thumbnail
	//   MaxWidth and MaxHeight without exceeding either value. If you specify this
	//   option, Elastic Transcoder does not scale thumbnails up.
	//   - ShrinkToFill : Elastic Transcoder scales thumbnails down so that their
	//   dimensions match the values that you specified for at least one of MaxWidth
	//   and MaxHeight without dropping below either value. If you specify this option,
	//   Elastic Transcoder does not scale thumbnails up.
	SizingPolicy *string
	// contains filtered or unexported fields
}

Thumbnails for videos.

type TimeSpan 

type TimeSpan struct {

	// The duration of the clip. The format can be either HH:mm:ss.SSS (maximum value:
	// 23:59:59.999; SSS is thousandths of a second) or sssss.SSS (maximum value:
	// 86399.999). If you don't specify a value, Elastic Transcoder creates an output
	// file from StartTime to the end of the file. If you specify a value longer than
	// the duration of the input file, Elastic Transcoder transcodes the file and
	// returns a warning message.
	Duration *string

	// The place in the input file where you want a clip to start. The format can be
	// either HH:mm:ss.SSS (maximum value: 23:59:59.999; SSS is thousandths of a
	// second) or sssss.SSS (maximum value: 86399.999). If you don't specify a value,
	// Elastic Transcoder starts at the beginning of the input file.
	StartTime *string
	// contains filtered or unexported fields
}

Settings that determine when a clip begins and how long it lasts.

type Timing 

type Timing struct {

	// The time the job finished transcoding, in epoch milliseconds.
	FinishTimeMillis *int64

	// The time the job began transcoding, in epoch milliseconds.
	StartTimeMillis *int64

	// The time the job was submitted to Elastic Transcoder, in epoch milliseconds.
	SubmitTimeMillis *int64
	// contains filtered or unexported fields
}

Details about the timing of a job.

type ValidationException 

type ValidationException struct {
	Message *string

	ErrorCodeOverride *string
	// contains filtered or unexported fields
}

One or more required parameter values were not provided in the request.

func (*ValidationException) Error 

func (e *ValidationException) Error() string

func (*ValidationException) ErrorCode 

func (e *ValidationException) ErrorCode() string

func (*ValidationException) ErrorFault 

func (e *ValidationException) ErrorFault() smithy.ErrorFault

func (*ValidationException) ErrorMessage 

func (e *ValidationException) ErrorMessage() string

type VideoParameters 

type VideoParameters struct {

	// To better control resolution and aspect ratio of output videos, we recommend
	// that you use the values MaxWidth , MaxHeight , SizingPolicy , PaddingPolicy ,
	// and DisplayAspectRatio instead of Resolution and AspectRatio . The two groups of
	// settings are mutually exclusive. Do not use them together. The display aspect
	// ratio of the video in the output file. Valid values include: auto , 1:1 , 4:3 ,
	// 3:2 , 16:9 If you specify auto , Elastic Transcoder tries to preserve the aspect
	// ratio of the input file. If you specify an aspect ratio for the output file that
	// differs from aspect ratio of the input file, Elastic Transcoder adds
	// pillarboxing (black bars on the sides) or letterboxing (black bars on the top
	// and bottom) to maintain the aspect ratio of the active region of the video.
	AspectRatio *string

	// The bit rate of the video stream in the output file, in kilobits/second. Valid
	// values depend on the values of Level and Profile . If you specify auto , Elastic
	// Transcoder uses the detected bit rate of the input source. If you specify a
	// value other than auto , we recommend that you specify a value less than or equal
	// to the maximum H.264-compliant value listed for your level and profile: Level -
	// Maximum video bit rate in kilobits/second (baseline and main Profile) : maximum
	// video bit rate in kilobits/second (high Profile)
	//   - 1 - 64 : 80
	//   - 1b - 128 : 160
	//   - 1.1 - 192 : 240
	//   - 1.2 - 384 : 480
	//   - 1.3 - 768 : 960
	//   - 2 - 2000 : 2500
	//   - 3 - 10000 : 12500
	//   - 3.1 - 14000 : 17500
	//   - 3.2 - 20000 : 25000
	//   - 4 - 20000 : 25000
	//   - 4.1 - 50000 : 62500
	BitRate *string

	// The video codec for the output file. Valid values include gif , H.264 , mpeg2 ,
	// vp8 , and vp9 . You can only specify vp8 and vp9 when the container type is webm
	// , gif when the container type is gif , and mpeg2 when the container type is mpg .
	Codec *string

	// Profile (H.264/VP8/VP9 Only) The H.264 profile that you want to use for the
	// output file. Elastic Transcoder supports the following profiles:
	//   - baseline : The profile most commonly used for videoconferencing and for
	//   mobile applications.
	//   - main : The profile used for standard-definition digital TV broadcasts.
	//   - high : The profile used for high-definition digital TV broadcasts and for
	//   Blu-ray discs.
	// Level (H.264 Only) The H.264 level that you want to use for the output file.
	// Elastic Transcoder supports the following levels: 1 , 1b , 1.1 , 1.2 , 1.3 , 2 ,
	// 2.1 , 2.2 , 3 , 3.1 , 3.2 , 4 , 4.1 MaxReferenceFrames (H.264 Only) Applicable
	// only when the value of Video:Codec is H.264. The maximum number of previously
	// decoded frames to use as a reference for decoding future frames. Valid values
	// are integers 0 through 16, but we recommend that you not use a value greater
	// than the following: Min(Floor(Maximum decoded picture buffer in macroblocks *
	// 256 / (Width in pixels * Height in pixels)), 16) where Width in pixels and
	// Height in pixels represent either MaxWidth and MaxHeight, or Resolution. Maximum
	// decoded picture buffer in macroblocks depends on the value of the Level object.
	// See the list below. (A macroblock is a block of pixels measuring 16x16.)
	//   - 1 - 396
	//   - 1b - 396
	//   - 1.1 - 900
	//   - 1.2 - 2376
	//   - 1.3 - 2376
	//   - 2 - 2376
	//   - 2.1 - 4752
	//   - 2.2 - 8100
	//   - 3 - 8100
	//   - 3.1 - 18000
	//   - 3.2 - 20480
	//   - 4 - 32768
	//   - 4.1 - 32768
	// MaxBitRate (Optional, H.264/MPEG2/VP8/VP9 only) The maximum number of bits per
	// second in a video buffer; the size of the buffer is specified by BufferSize .
	// Specify a value between 16 and 62,500. You can reduce the bandwidth required to
	// stream a video by reducing the maximum bit rate, but this also reduces the
	// quality of the video. BufferSize (Optional, H.264/MPEG2/VP8/VP9 only) The
	// maximum number of bits in any x seconds of the output video. This window is
	// commonly 10 seconds, the standard segment duration when you're using FMP4 or
	// MPEG-TS for the container type of the output video. Specify an integer greater
	// than 0. If you specify MaxBitRate and omit BufferSize , Elastic Transcoder sets
	// BufferSize to 10 times the value of MaxBitRate . InterlacedMode (Optional,
	// H.264/MPEG2 Only) The interlace mode for the output video. Interlaced video is
	// used to double the perceived frame rate for a video by interlacing two fields
	// (one field on every other line, the other field on the other lines) so that the
	// human eye registers multiple pictures per frame. Interlacing reduces the
	// bandwidth required for transmitting a video, but can result in blurred images
	// and flickering. Valid values include Progressive (no interlacing, top to
	// bottom), TopFirst (top field first), BottomFirst (bottom field first), and Auto
	// . If InterlaceMode is not specified, Elastic Transcoder uses Progressive for
	// the output. If Auto is specified, Elastic Transcoder interlaces the output.
	// ColorSpaceConversionMode (Optional, H.264/MPEG2 Only) The color space conversion
	// Elastic Transcoder applies to the output video. Color spaces are the algorithms
	// used by the computer to store information about how to render color. Bt.601 is
	// the standard for standard definition video, while Bt.709 is the standard for
	// high definition video. Valid values include None , Bt709toBt601 , Bt601toBt709 ,
	// and Auto . If you chose Auto for ColorSpaceConversionMode and your output is
	// interlaced, your frame rate is one of 23.97 , 24 , 25 , 29.97 , 50 , or 60 ,
	// your SegmentDuration is null, and you are using one of the resolution changes
	// from the list below, Elastic Transcoder applies the following color space
	// conversions:
	//   - Standard to HD, 720x480 to 1920x1080 - Elastic Transcoder applies
	//   Bt601ToBt709
	//   - Standard to HD, 720x576 to 1920x1080 - Elastic Transcoder applies
	//   Bt601ToBt709
	//   - HD to Standard, 1920x1080 to 720x480 - Elastic Transcoder applies
	//   Bt709ToBt601
	//   - HD to Standard, 1920x1080 to 720x576 - Elastic Transcoder applies
	//   Bt709ToBt601
	// Elastic Transcoder may change the behavior of the ColorspaceConversionMode Auto
	// mode in the future. All outputs in a playlist must use the same
	// ColorSpaceConversionMode . If you do not specify a ColorSpaceConversionMode ,
	// Elastic Transcoder does not change the color space of a file. If you are unsure
	// what ColorSpaceConversionMode was applied to your output file, you can check
	// the AppliedColorSpaceConversion parameter included in your job response. If
	// your job does not have an AppliedColorSpaceConversion in its response, no
	// ColorSpaceConversionMode was applied. ChromaSubsampling The sampling pattern for
	// the chroma (color) channels of the output video. Valid values include yuv420p
	// and yuv422p . yuv420p samples the chroma information of every other horizontal
	// and every other vertical line, yuv422p samples the color information of every
	// horizontal line and every other vertical line. LoopCount (Gif Only) The number
	// of times you want the output gif to loop. Valid values include Infinite and
	// integers between 0 and 100 , inclusive.
	CodecOptions map[string]string

	// The value that Elastic Transcoder adds to the metadata in the output file.
	DisplayAspectRatio *string

	// Applicable only when the value of Video:Codec is one of H.264 , MPEG2 , or VP8 .
	// Whether to use a fixed value for FixedGOP . Valid values are true and false :
	//   - true : Elastic Transcoder uses the value of KeyframesMaxDist for the
	//   distance between key frames (the number of frames in a group of pictures, or
	//   GOP).
	//   - false : The distance between key frames can vary.
	// FixedGOP must be set to true for fmp4 containers.
	FixedGOP *string

	// The frames per second for the video stream in the output file. Valid values
	// include: auto , 10 , 15 , 23.97 , 24 , 25 , 29.97 , 30 , 60 If you specify auto
	// , Elastic Transcoder uses the detected frame rate of the input source. If you
	// specify a frame rate, we recommend that you perform the following calculation:
	// Frame rate = maximum recommended decoding speed in luma samples/second / (width
	// in pixels * height in pixels) where:
	//   - width in pixels and height in pixels represent the Resolution of the output
	//   video.
	//   - maximum recommended decoding speed in Luma samples/second is less than or
	//   equal to the maximum value listed in the following table, based on the value
	//   that you specified for Level.
	// The maximum recommended decoding speed in Luma samples/second for each level is
	// described in the following list (Level - Decoding speed):
	//   - 1 - 380160
	//   - 1b - 380160
	//   - 1.1 - 76800
	//   - 1.2 - 1536000
	//   - 1.3 - 3041280
	//   - 2 - 3041280
	//   - 2.1 - 5068800
	//   - 2.2 - 5184000
	//   - 3 - 10368000
	//   - 3.1 - 27648000
	//   - 3.2 - 55296000
	//   - 4 - 62914560
	//   - 4.1 - 62914560
	FrameRate *string

	// Applicable only when the value of Video:Codec is one of H.264 , MPEG2 , or VP8 .
	// The maximum number of frames between key frames. Key frames are fully encoded
	// frames; the frames between key frames are encoded based, in part, on the content
	// of the key frames. The value is an integer formatted as a string; valid values
	// are between 1 (every frame is a key frame) and 100000, inclusive. A higher value
	// results in higher compression but may also discernibly decrease video quality.
	// For Smooth outputs, the FrameRate must have a constant ratio to the
	// KeyframesMaxDist . This allows Smooth playlists to switch between different
	// quality levels while the file is being played. For example, an input file can
	// have a FrameRate of 30 with a KeyframesMaxDist of 90. The output file then
	// needs to have a ratio of 1:3. Valid outputs would have FrameRate of 30, 25, and
	// 10, and KeyframesMaxDist of 90, 75, and 30, respectively. Alternately, this can
	// be achieved by setting FrameRate to auto and having the same values for
	// MaxFrameRate and KeyframesMaxDist .
	KeyframesMaxDist *string

	// If you specify auto for FrameRate , Elastic Transcoder uses the frame rate of
	// the input video for the frame rate of the output video. Specify the maximum
	// frame rate that you want Elastic Transcoder to use when the frame rate of the
	// input video is greater than the desired maximum frame rate of the output video.
	// Valid values include: 10 , 15 , 23.97 , 24 , 25 , 29.97 , 30 , 60 .
	MaxFrameRate *string

	// The maximum height of the output video in pixels. If you specify auto , Elastic
	// Transcoder uses 1080 (Full HD) as the default value. If you specify a numeric
	// value, enter an even integer between 96 and 3072.
	MaxHeight *string

	// The maximum width of the output video in pixels. If you specify auto , Elastic
	// Transcoder uses 1920 (Full HD) as the default value. If you specify a numeric
	// value, enter an even integer between 128 and 4096.
	MaxWidth *string

	// When you set PaddingPolicy to Pad , Elastic Transcoder may add black bars to the
	// top and bottom and/or left and right sides of the output video to make the total
	// size of the output video match the values that you specified for MaxWidth and
	// MaxHeight .
	PaddingPolicy *string

	// To better control resolution and aspect ratio of output videos, we recommend
	// that you use the values MaxWidth , MaxHeight , SizingPolicy , PaddingPolicy ,
	// and DisplayAspectRatio instead of Resolution and AspectRatio . The two groups of
	// settings are mutually exclusive. Do not use them together. The width and height
	// of the video in the output file, in pixels. Valid values are auto and width x
	// height:
	//   - auto : Elastic Transcoder attempts to preserve the width and height of the
	//   input file, subject to the following rules.
	//   - width x height : The width and height of the output video in pixels.
	// Note the following about specifying the width and height:
	//   - The width must be an even integer between 128 and 4096, inclusive.
	//   - The height must be an even integer between 96 and 3072, inclusive.
	//   - If you specify a resolution that is less than the resolution of the input
	//   file, Elastic Transcoder rescales the output file to the lower resolution.
	//   - If you specify a resolution that is greater than the resolution of the
	//   input file, Elastic Transcoder rescales the output to the higher resolution.
	//   - We recommend that you specify a resolution for which the product of width
	//   and height is less than or equal to the applicable value in the following list
	//   (List - Max width x height value):
	//   - 1 - 25344
	//   - 1b - 25344
	//   - 1.1 - 101376
	//   - 1.2 - 101376
	//   - 1.3 - 101376
	//   - 2 - 101376
	//   - 2.1 - 202752
	//   - 2.2 - 404720
	//   - 3 - 404720
	//   - 3.1 - 921600
	//   - 3.2 - 1310720
	//   - 4 - 2097152
	//   - 4.1 - 2097152
	Resolution *string

	// Specify one of the following values to control scaling of the output video:
	//   - Fit : Elastic Transcoder scales the output video so it matches the value
	//   that you specified in either MaxWidth or MaxHeight without exceeding the other
	//   value.
	//   - Fill : Elastic Transcoder scales the output video so it matches the value
	//   that you specified in either MaxWidth or MaxHeight and matches or exceeds the
	//   other value. Elastic Transcoder centers the output video and then crops it in
	//   the dimension (if any) that exceeds the maximum value.
	//   - Stretch : Elastic Transcoder stretches the output video to match the values
	//   that you specified for MaxWidth and MaxHeight . If the relative proportions of
	//   the input video and the output video are different, the output video will be
	//   distorted.
	//   - Keep : Elastic Transcoder does not scale the output video. If either
	//   dimension of the input video exceeds the values that you specified for
	//   MaxWidth and MaxHeight , Elastic Transcoder crops the output video.
	//   - ShrinkToFit : Elastic Transcoder scales the output video down so that its
	//   dimensions match the values that you specified for at least one of MaxWidth
	//   and MaxHeight without exceeding either value. If you specify this option,
	//   Elastic Transcoder does not scale the video up.
	//   - ShrinkToFill : Elastic Transcoder scales the output video down so that its
	//   dimensions match the values that you specified for at least one of MaxWidth
	//   and MaxHeight without dropping below either value. If you specify this option,
	//   Elastic Transcoder does not scale the video up.
	SizingPolicy *string

	// Settings for the size, location, and opacity of graphics that you want Elastic
	// Transcoder to overlay over videos that are transcoded using this preset. You can
	// specify settings for up to four watermarks. Watermarks appear in the specified
	// size and location, and with the specified opacity for the duration of the
	// transcoded video. Watermarks can be in .png or .jpg format. If you want to
	// display a watermark that is not rectangular, use the .png format, which supports
	// transparency. When you create a job that uses this preset, you specify the .png
	// or .jpg graphics that you want Elastic Transcoder to include in the transcoded
	// videos. You can specify fewer graphics in the job than you specify watermark
	// settings in the preset, which allows you to use the same preset for up to four
	// watermarks that have different dimensions.
	Watermarks []PresetWatermark
	// contains filtered or unexported fields
}

The VideoParameters structure.

type Warning 

type Warning struct {

	// The code of the cross-regional warning.
	Code *string

	// The message explaining what resources are in a different region from the
	// pipeline. AWS KMS keys must be in the same region as the pipeline.
	Message *string
	// contains filtered or unexported fields
}

Elastic Transcoder returns a warning if the resources used by your pipeline are not in the same region as the pipeline. Using resources in the same region, such as your Amazon S3 buckets, Amazon SNS notification topics, and AWS KMS key, reduces processing time and prevents cross-regional charges.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.