Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type BufferingHints

type BufferingHints struct {

	// Buffer incoming data for the specified period of time, in seconds, before
	// delivering it to the destination. The default value is 300. This parameter is
	// optional but if you specify a value for it, you must also specify a value for
	// SizeInMBs, and vice versa.
	IntervalInSeconds *int32

	// Buffer incoming data to the specified size, in MiBs, before delivering it to the
	// destination. The default value is 5. This parameter is optional but if you
	// specify a value for it, you must also specify a value for IntervalInSeconds, and
	// vice versa. We recommend setting this parameter to a value greater than the
	// amount of data you typically ingest into the delivery stream in 10 seconds. For
	// example, if you typically ingest data at 1 MiB/sec, the value should be 10 MiB
	// or higher.
	SizeInMBs *int32
}

    Describes hints for the buffering to perform before delivering data to the destination. These options are treated as hints, and therefore Kinesis Data Firehose might choose to use different values when it is optimal. The SizeInMBs and IntervalInSeconds parameters are optional. However, if specify a value for one of them, you must also provide a value for the other.

    type CloudWatchLoggingOptions

    type CloudWatchLoggingOptions struct {
    
    	// Enables or disables CloudWatch logging.
    	Enabled *bool
    
    	// The CloudWatch group name for logging. This value is required if CloudWatch
    	// logging is enabled.
    	LogGroupName *string
    
    	// The CloudWatch log stream name for logging. This value is required if CloudWatch
    	// logging is enabled.
    	LogStreamName *string
    }

      Describes the Amazon CloudWatch logging options for your delivery stream.

      type CompressionFormat

      type CompressionFormat string
      const (
      	CompressionFormatUncompressed CompressionFormat = "UNCOMPRESSED"
      	CompressionFormatGzip         CompressionFormat = "GZIP"
      	CompressionFormatZip          CompressionFormat = "ZIP"
      	CompressionFormatSnappy       CompressionFormat = "Snappy"
      	CompressionFormatHadoopSnappy CompressionFormat = "HADOOP_SNAPPY"
      )

        Enum values for CompressionFormat

        func (CompressionFormat) Values

          Values returns all known values for CompressionFormat. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

          type ConcurrentModificationException

          type ConcurrentModificationException struct {
          	Message *string
          }

            Another modification has already happened. Fetch VersionId again and use it to update the destination.

            func (*ConcurrentModificationException) Error

            func (*ConcurrentModificationException) ErrorCode

            func (e *ConcurrentModificationException) ErrorCode() string

            func (*ConcurrentModificationException) ErrorFault

            func (*ConcurrentModificationException) ErrorMessage

            func (e *ConcurrentModificationException) ErrorMessage() string

            type ContentEncoding

            type ContentEncoding string
            const (
            	ContentEncodingNone ContentEncoding = "NONE"
            	ContentEncodingGzip ContentEncoding = "GZIP"
            )

              Enum values for ContentEncoding

              func (ContentEncoding) Values

              func (ContentEncoding) Values() []ContentEncoding

                Values returns all known values for ContentEncoding. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                type CopyCommand

                type CopyCommand struct {
                
                	// The name of the target table. The table must already exist in the database.
                	//
                	// This member is required.
                	DataTableName *string
                
                	// Optional parameters to use with the Amazon Redshift COPY command. For more
                	// information, see the "Optional Parameters" section of Amazon Redshift COPY
                	// command (https://docs.aws.amazon.com/redshift/latest/dg/r_COPY.html). Some
                	// possible examples that would apply to Kinesis Data Firehose are as follows:
                	// delimiter '\t' lzop; - fields are delimited with "\t" (TAB character) and
                	// compressed using lzop. delimiter '|' - fields are delimited with "|" (this is
                	// the default delimiter). delimiter '|' escape - the delimiter should be escaped.
                	// fixedwidth 'venueid:3,venuename:25,venuecity:12,venuestate:2,venueseats:6' -
                	// fields are fixed width in the source, with each width specified after every
                	// column in the table. JSON 's3://mybucket/jsonpaths.txt' - data is in JSON
                	// format, and the path specified is the format of the data. For more examples, see
                	// Amazon Redshift COPY command examples
                	// (https://docs.aws.amazon.com/redshift/latest/dg/r_COPY_command_examples.html).
                	CopyOptions *string
                
                	// A comma-separated list of column names.
                	DataTableColumns *string
                }

                  Describes a COPY command for Amazon Redshift.

                  type DataFormatConversionConfiguration

                  type DataFormatConversionConfiguration struct {
                  
                  	// Defaults to true. Set it to false if you want to disable format conversion while
                  	// preserving the configuration details.
                  	Enabled *bool
                  
                  	// Specifies the deserializer that you want Kinesis Data Firehose to use to convert
                  	// the format of your data from JSON. This parameter is required if Enabled is set
                  	// to true.
                  	InputFormatConfiguration *InputFormatConfiguration
                  
                  	// Specifies the serializer that you want Kinesis Data Firehose to use to convert
                  	// the format of your data to the Parquet or ORC format. This parameter is required
                  	// if Enabled is set to true.
                  	OutputFormatConfiguration *OutputFormatConfiguration
                  
                  	// Specifies the AWS Glue Data Catalog table that contains the column information.
                  	// This parameter is required if Enabled is set to true.
                  	SchemaConfiguration *SchemaConfiguration
                  }

                    Specifies that you want Kinesis Data Firehose to convert data from the JSON format to the Parquet or ORC format before writing it to Amazon S3. Kinesis Data Firehose uses the serializer and deserializer that you specify, in addition to the column information from the AWS Glue table, to deserialize your input data from JSON and then serialize it to the Parquet or ORC format. For more information, see Kinesis Data Firehose Record Format Conversion (https://docs.aws.amazon.com/firehose/latest/dev/record-format-conversion.html).

                    type DeliveryStreamDescription

                    type DeliveryStreamDescription struct {
                    
                    	// The Amazon Resource Name (ARN) of the delivery stream. For more information, see
                    	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                    	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                    	//
                    	// This member is required.
                    	DeliveryStreamARN *string
                    
                    	// The name of the delivery stream.
                    	//
                    	// This member is required.
                    	DeliveryStreamName *string
                    
                    	// The status of the delivery stream. If the status of a delivery stream is
                    	// CREATING_FAILED, this status doesn't change, and you can't invoke
                    	// CreateDeliveryStream again on it. However, you can invoke the
                    	// DeleteDeliveryStream operation to delete it.
                    	//
                    	// This member is required.
                    	DeliveryStreamStatus DeliveryStreamStatus
                    
                    	// The delivery stream type. This can be one of the following values:
                    	//
                    	// * DirectPut:
                    	// Provider applications access the delivery stream directly.
                    	//
                    	// *
                    	// KinesisStreamAsSource: The delivery stream uses a Kinesis data stream as a
                    	// source.
                    	//
                    	// This member is required.
                    	DeliveryStreamType DeliveryStreamType
                    
                    	// The destinations.
                    	//
                    	// This member is required.
                    	Destinations []DestinationDescription
                    
                    	// Indicates whether there are more destinations available to list.
                    	//
                    	// This member is required.
                    	HasMoreDestinations *bool
                    
                    	// Each time the destination is updated for a delivery stream, the version ID is
                    	// changed, and the current version ID is required when updating the destination.
                    	// This is so that the service knows it is applying the changes to the correct
                    	// version of the delivery stream.
                    	//
                    	// This member is required.
                    	VersionId *string
                    
                    	// The date and time that the delivery stream was created.
                    	CreateTimestamp *time.Time
                    
                    	// Indicates the server-side encryption (SSE) status for the delivery stream.
                    	DeliveryStreamEncryptionConfiguration *DeliveryStreamEncryptionConfiguration
                    
                    	// Provides details in case one of the following operations fails due to an error
                    	// related to KMS: CreateDeliveryStream, DeleteDeliveryStream,
                    	// StartDeliveryStreamEncryption, StopDeliveryStreamEncryption.
                    	FailureDescription *FailureDescription
                    
                    	// The date and time that the delivery stream was last updated.
                    	LastUpdateTimestamp *time.Time
                    
                    	// If the DeliveryStreamType parameter is KinesisStreamAsSource, a
                    	// SourceDescription object describing the source Kinesis data stream.
                    	Source *SourceDescription
                    }

                      Contains information about a delivery stream.

                      type DeliveryStreamEncryptionConfiguration

                      type DeliveryStreamEncryptionConfiguration struct {
                      
                      	// Provides details in case one of the following operations fails due to an error
                      	// related to KMS: CreateDeliveryStream, DeleteDeliveryStream,
                      	// StartDeliveryStreamEncryption, StopDeliveryStreamEncryption.
                      	FailureDescription *FailureDescription
                      
                      	// If KeyType is CUSTOMER_MANAGED_CMK, this field contains the ARN of the customer
                      	// managed CMK. If KeyType is AWS_OWNED_CMK, DeliveryStreamEncryptionConfiguration
                      	// doesn't contain a value for KeyARN.
                      	KeyARN *string
                      
                      	// Indicates the type of customer master key (CMK) that is used for encryption. The
                      	// default setting is AWS_OWNED_CMK. For more information about CMKs, see Customer
                      	// Master Keys (CMKs)
                      	// (https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#master_keys).
                      	KeyType KeyType
                      
                      	// This is the server-side encryption (SSE) status for the delivery stream. For a
                      	// full description of the different values of this status, see
                      	// StartDeliveryStreamEncryption and StopDeliveryStreamEncryption. If this status
                      	// is ENABLING_FAILED or DISABLING_FAILED, it is the status of the most recent
                      	// attempt to enable or disable SSE, respectively.
                      	Status DeliveryStreamEncryptionStatus
                      }

                        Contains information about the server-side encryption (SSE) status for the delivery stream, the type customer master key (CMK) in use, if any, and the ARN of the CMK. You can get DeliveryStreamEncryptionConfiguration by invoking the DescribeDeliveryStream operation.

                        type DeliveryStreamEncryptionConfigurationInput

                        type DeliveryStreamEncryptionConfigurationInput struct {
                        
                        	// Indicates the type of customer master key (CMK) to use for encryption. The
                        	// default setting is AWS_OWNED_CMK. For more information about CMKs, see Customer
                        	// Master Keys (CMKs)
                        	// (https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#master_keys).
                        	// When you invoke CreateDeliveryStream or StartDeliveryStreamEncryption with
                        	// KeyType set to CUSTOMER_MANAGED_CMK, Kinesis Data Firehose invokes the Amazon
                        	// KMS operation CreateGrant
                        	// (https://docs.aws.amazon.com/kms/latest/APIReference/API_CreateGrant.html) to
                        	// create a grant that allows the Kinesis Data Firehose service to use the customer
                        	// managed CMK to perform encryption and decryption. Kinesis Data Firehose manages
                        	// that grant. When you invoke StartDeliveryStreamEncryption to change the CMK for
                        	// a delivery stream that is encrypted with a customer managed CMK, Kinesis Data
                        	// Firehose schedules the grant it had on the old CMK for retirement. You can use a
                        	// CMK of type CUSTOMER_MANAGED_CMK to encrypt up to 500 delivery streams. If a
                        	// CreateDeliveryStream or StartDeliveryStreamEncryption operation exceeds this
                        	// limit, Kinesis Data Firehose throws a LimitExceededException. To encrypt your
                        	// delivery stream, use symmetric CMKs. Kinesis Data Firehose doesn't support
                        	// asymmetric CMKs. For information about symmetric and asymmetric CMKs, see About
                        	// Symmetric and Asymmetric CMKs
                        	// (https://docs.aws.amazon.com/kms/latest/developerguide/symm-asymm-concepts.html)
                        	// in the AWS Key Management Service developer guide.
                        	//
                        	// This member is required.
                        	KeyType KeyType
                        
                        	// If you set KeyType to CUSTOMER_MANAGED_CMK, you must specify the Amazon Resource
                        	// Name (ARN) of the CMK. If you set KeyType to AWS_OWNED_CMK, Kinesis Data
                        	// Firehose uses a service-account CMK.
                        	KeyARN *string
                        }

                          Specifies the type and Amazon Resource Name (ARN) of the CMK to use for Server-Side Encryption (SSE).

                          type DeliveryStreamEncryptionStatus

                          type DeliveryStreamEncryptionStatus string
                          const (
                          	DeliveryStreamEncryptionStatusEnabled         DeliveryStreamEncryptionStatus = "ENABLED"
                          	DeliveryStreamEncryptionStatusEnabling        DeliveryStreamEncryptionStatus = "ENABLING"
                          	DeliveryStreamEncryptionStatusEnablingFailed  DeliveryStreamEncryptionStatus = "ENABLING_FAILED"
                          	DeliveryStreamEncryptionStatusDisabled        DeliveryStreamEncryptionStatus = "DISABLED"
                          	DeliveryStreamEncryptionStatusDisabling       DeliveryStreamEncryptionStatus = "DISABLING"
                          	DeliveryStreamEncryptionStatusDisablingFailed DeliveryStreamEncryptionStatus = "DISABLING_FAILED"
                          )

                            Enum values for DeliveryStreamEncryptionStatus

                            func (DeliveryStreamEncryptionStatus) Values

                              Values returns all known values for DeliveryStreamEncryptionStatus. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                              type DeliveryStreamFailureType

                              type DeliveryStreamFailureType string
                              const (
                              	DeliveryStreamFailureTypeRetireKmsGrantFailed      DeliveryStreamFailureType = "RETIRE_KMS_GRANT_FAILED"
                              	DeliveryStreamFailureTypeCreateKmsGrantFailed      DeliveryStreamFailureType = "CREATE_KMS_GRANT_FAILED"
                              	DeliveryStreamFailureTypeKmsAccessDenied           DeliveryStreamFailureType = "KMS_ACCESS_DENIED"
                              	DeliveryStreamFailureTypeDisabledKmsKey            DeliveryStreamFailureType = "DISABLED_KMS_KEY"
                              	DeliveryStreamFailureTypeInvalidKmsKey             DeliveryStreamFailureType = "INVALID_KMS_KEY"
                              	DeliveryStreamFailureTypeKmsKeyNotFound            DeliveryStreamFailureType = "KMS_KEY_NOT_FOUND"
                              	DeliveryStreamFailureTypeKmsOptInRequired          DeliveryStreamFailureType = "KMS_OPT_IN_REQUIRED"
                              	DeliveryStreamFailureTypeCreateEniFailed           DeliveryStreamFailureType = "CREATE_ENI_FAILED"
                              	DeliveryStreamFailureTypeDeleteEniFailed           DeliveryStreamFailureType = "DELETE_ENI_FAILED"
                              	DeliveryStreamFailureTypeSubnetNotFound            DeliveryStreamFailureType = "SUBNET_NOT_FOUND"
                              	DeliveryStreamFailureTypeSecurityGroupNotFound     DeliveryStreamFailureType = "SECURITY_GROUP_NOT_FOUND"
                              	DeliveryStreamFailureTypeEniAccessDenied           DeliveryStreamFailureType = "ENI_ACCESS_DENIED"
                              	DeliveryStreamFailureTypeSubnetAccessDenied        DeliveryStreamFailureType = "SUBNET_ACCESS_DENIED"
                              	DeliveryStreamFailureTypeSecurityGroupAccessDenied DeliveryStreamFailureType = "SECURITY_GROUP_ACCESS_DENIED"
                              	DeliveryStreamFailureTypeUnknownError              DeliveryStreamFailureType = "UNKNOWN_ERROR"
                              )

                                Enum values for DeliveryStreamFailureType

                                func (DeliveryStreamFailureType) Values

                                  Values returns all known values for DeliveryStreamFailureType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                  type DeliveryStreamStatus

                                  type DeliveryStreamStatus string
                                  const (
                                  	DeliveryStreamStatusCreating       DeliveryStreamStatus = "CREATING"
                                  	DeliveryStreamStatusCreatingFailed DeliveryStreamStatus = "CREATING_FAILED"
                                  	DeliveryStreamStatusDeleting       DeliveryStreamStatus = "DELETING"
                                  	DeliveryStreamStatusDeletingFailed DeliveryStreamStatus = "DELETING_FAILED"
                                  	DeliveryStreamStatusActive         DeliveryStreamStatus = "ACTIVE"
                                  )

                                    Enum values for DeliveryStreamStatus

                                    func (DeliveryStreamStatus) Values

                                      Values returns all known values for DeliveryStreamStatus. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                      type DeliveryStreamType

                                      type DeliveryStreamType string
                                      const (
                                      	DeliveryStreamTypeDirectPut             DeliveryStreamType = "DirectPut"
                                      	DeliveryStreamTypeKinesisStreamAsSource DeliveryStreamType = "KinesisStreamAsSource"
                                      )

                                        Enum values for DeliveryStreamType

                                        func (DeliveryStreamType) Values

                                          Values returns all known values for DeliveryStreamType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                          type Deserializer

                                          type Deserializer struct {
                                          
                                          	// The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for
                                          	// deserializing data, which means converting it from the JSON format in
                                          	// preparation for serializing it to the Parquet or ORC format. This is one of two
                                          	// deserializers you can choose, depending on which one offers the functionality
                                          	// you need. The other option is the OpenX SerDe.
                                          	HiveJsonSerDe *HiveJsonSerDe
                                          
                                          	// The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which
                                          	// means converting it from the JSON format in preparation for serializing it to
                                          	// the Parquet or ORC format. This is one of two deserializers you can choose,
                                          	// depending on which one offers the functionality you need. The other option is
                                          	// the native Hive / HCatalog JsonSerDe.
                                          	OpenXJsonSerDe *OpenXJsonSerDe
                                          }

                                            The deserializer you want Kinesis Data Firehose to use for converting the input data from JSON. Kinesis Data Firehose then serializes the data to its final format using the Serializer. Kinesis Data Firehose supports two types of deserializers: the Apache Hive JSON SerDe (https://cwiki.apache.org/confluence/display/Hive/LanguageManual+DDL#LanguageManualDDL-JSON) and the OpenX JSON SerDe (https://github.com/rcongiu/Hive-JSON-Serde).

                                            type DestinationDescription

                                            type DestinationDescription struct {
                                            
                                            	// The ID of the destination.
                                            	//
                                            	// This member is required.
                                            	DestinationId *string
                                            
                                            	// The destination in Amazon ES.
                                            	ElasticsearchDestinationDescription *ElasticsearchDestinationDescription
                                            
                                            	// The destination in Amazon S3.
                                            	ExtendedS3DestinationDescription *ExtendedS3DestinationDescription
                                            
                                            	// Describes the specified HTTP endpoint destination.
                                            	HttpEndpointDestinationDescription *HttpEndpointDestinationDescription
                                            
                                            	// The destination in Amazon Redshift.
                                            	RedshiftDestinationDescription *RedshiftDestinationDescription
                                            
                                            	// [Deprecated] The destination in Amazon S3.
                                            	S3DestinationDescription *S3DestinationDescription
                                            
                                            	// The destination in Splunk.
                                            	SplunkDestinationDescription *SplunkDestinationDescription
                                            }

                                              Describes the destination for a delivery stream.

                                              type ElasticsearchBufferingHints

                                              type ElasticsearchBufferingHints struct {
                                              
                                              	// Buffer incoming data for the specified period of time, in seconds, before
                                              	// delivering it to the destination. The default value is 300 (5 minutes).
                                              	IntervalInSeconds *int32
                                              
                                              	// Buffer incoming data to the specified size, in MBs, before delivering it to the
                                              	// destination. The default value is 5. We recommend setting this parameter to a
                                              	// value greater than the amount of data you typically ingest into the delivery
                                              	// stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the
                                              	// value should be 10 MB or higher.
                                              	SizeInMBs *int32
                                              }

                                                Describes the buffering to perform before delivering data to the Amazon ES destination.

                                                type ElasticsearchDestinationConfiguration

                                                type ElasticsearchDestinationConfiguration struct {
                                                
                                                	// The Elasticsearch index name.
                                                	//
                                                	// This member is required.
                                                	IndexName *string
                                                
                                                	// The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data
                                                	// Firehose for calling the Amazon ES Configuration API and for indexing documents.
                                                	// For more information, see Grant Kinesis Data Firehose Access to an Amazon S3
                                                	// Destination
                                                	// (https://docs.aws.amazon.com/firehose/latest/dev/controlling-access.html#using-iam-s3)
                                                	// and Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                	//
                                                	// This member is required.
                                                	RoleARN *string
                                                
                                                	// The configuration for the backup Amazon S3 location.
                                                	//
                                                	// This member is required.
                                                	S3Configuration *S3DestinationConfiguration
                                                
                                                	// The buffering options. If no value is specified, the default values for
                                                	// ElasticsearchBufferingHints are used.
                                                	BufferingHints *ElasticsearchBufferingHints
                                                
                                                	// The Amazon CloudWatch logging options for your delivery stream.
                                                	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                
                                                	// The endpoint to use when communicating with the cluster. Specify either this
                                                	// ClusterEndpoint or the DomainARN field.
                                                	ClusterEndpoint *string
                                                
                                                	// The ARN of the Amazon ES domain. The IAM role must have permissions for
                                                	// DescribeElasticsearchDomain, DescribeElasticsearchDomains, and
                                                	// DescribeElasticsearchDomainConfig after assuming the role specified in RoleARN.
                                                	// For more information, see Amazon Resource Names (ARNs) and AWS Service
                                                	// Namespaces
                                                	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                	// Specify either ClusterEndpoint or DomainARN.
                                                	DomainARN *string
                                                
                                                	// The Elasticsearch index rotation period. Index rotation appends a timestamp to
                                                	// the IndexName to facilitate the expiration of old data. For more information,
                                                	// see Index Rotation for the Amazon ES Destination
                                                	// (https://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html#es-index-rotation).
                                                	// The default value is OneDay.
                                                	IndexRotationPeriod ElasticsearchIndexRotationPeriod
                                                
                                                	// The data processing configuration.
                                                	ProcessingConfiguration *ProcessingConfiguration
                                                
                                                	// The retry behavior in case Kinesis Data Firehose is unable to deliver documents
                                                	// to Amazon ES. The default value is 300 (5 minutes).
                                                	RetryOptions *ElasticsearchRetryOptions
                                                
                                                	// Defines how documents should be delivered to Amazon S3. When it is set to
                                                	// FailedDocumentsOnly, Kinesis Data Firehose writes any documents that could not
                                                	// be indexed to the configured Amazon S3 destination, with elasticsearch-failed/
                                                	// appended to the key prefix. When set to AllDocuments, Kinesis Data Firehose
                                                	// delivers all incoming records to Amazon S3, and also writes failed documents
                                                	// with elasticsearch-failed/ appended to the prefix. For more information, see
                                                	// Amazon S3 Backup for the Amazon ES Destination
                                                	// (https://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html#es-s3-backup).
                                                	// Default value is FailedDocumentsOnly. You can't change this backup mode after
                                                	// you create the delivery stream.
                                                	S3BackupMode ElasticsearchS3BackupMode
                                                
                                                	// The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type
                                                	// per index. If you try to specify a new type for an existing index that already
                                                	// has another type, Kinesis Data Firehose returns an error during run time. For
                                                	// Elasticsearch 7.x, don't specify a TypeName.
                                                	TypeName *string
                                                
                                                	// The details of the VPC of the Amazon ES destination.
                                                	VpcConfiguration *VpcConfiguration
                                                }

                                                  Describes the configuration of a destination in Amazon ES.

                                                  type ElasticsearchDestinationDescription

                                                  type ElasticsearchDestinationDescription struct {
                                                  
                                                  	// The buffering options.
                                                  	BufferingHints *ElasticsearchBufferingHints
                                                  
                                                  	// The Amazon CloudWatch logging options.
                                                  	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                  
                                                  	// The endpoint to use when communicating with the cluster. Kinesis Data Firehose
                                                  	// uses either this ClusterEndpoint or the DomainARN field to send data to Amazon
                                                  	// ES.
                                                  	ClusterEndpoint *string
                                                  
                                                  	// The ARN of the Amazon ES domain. For more information, see Amazon Resource Names
                                                  	// (ARNs) and AWS Service Namespaces
                                                  	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                  	// Kinesis Data Firehose uses either ClusterEndpoint or DomainARN to send data to
                                                  	// Amazon ES.
                                                  	DomainARN *string
                                                  
                                                  	// The Elasticsearch index name.
                                                  	IndexName *string
                                                  
                                                  	// The Elasticsearch index rotation period
                                                  	IndexRotationPeriod ElasticsearchIndexRotationPeriod
                                                  
                                                  	// The data processing configuration.
                                                  	ProcessingConfiguration *ProcessingConfiguration
                                                  
                                                  	// The Amazon ES retry options.
                                                  	RetryOptions *ElasticsearchRetryOptions
                                                  
                                                  	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                  	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                  	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                  	RoleARN *string
                                                  
                                                  	// The Amazon S3 backup mode.
                                                  	S3BackupMode ElasticsearchS3BackupMode
                                                  
                                                  	// The Amazon S3 destination.
                                                  	S3DestinationDescription *S3DestinationDescription
                                                  
                                                  	// The Elasticsearch type name. This applies to Elasticsearch 6.x and lower
                                                  	// versions. For Elasticsearch 7.x, there's no value for TypeName.
                                                  	TypeName *string
                                                  
                                                  	// The details of the VPC of the Amazon ES destination.
                                                  	VpcConfigurationDescription *VpcConfigurationDescription
                                                  }

                                                    The destination description in Amazon ES.

                                                    type ElasticsearchDestinationUpdate

                                                    type ElasticsearchDestinationUpdate struct {
                                                    
                                                    	// The buffering options. If no value is specified, ElasticsearchBufferingHints
                                                    	// object default values are used.
                                                    	BufferingHints *ElasticsearchBufferingHints
                                                    
                                                    	// The CloudWatch logging options for your delivery stream.
                                                    	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                    
                                                    	// The endpoint to use when communicating with the cluster. Specify either this
                                                    	// ClusterEndpoint or the DomainARN field.
                                                    	ClusterEndpoint *string
                                                    
                                                    	// The ARN of the Amazon ES domain. The IAM role must have permissions for
                                                    	// DescribeElasticsearchDomain, DescribeElasticsearchDomains, and
                                                    	// DescribeElasticsearchDomainConfig after assuming the IAM role specified in
                                                    	// RoleARN. For more information, see Amazon Resource Names (ARNs) and AWS Service
                                                    	// Namespaces
                                                    	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                    	// Specify either ClusterEndpoint or DomainARN.
                                                    	DomainARN *string
                                                    
                                                    	// The Elasticsearch index name.
                                                    	IndexName *string
                                                    
                                                    	// The Elasticsearch index rotation period. Index rotation appends a timestamp to
                                                    	// IndexName to facilitate the expiration of old data. For more information, see
                                                    	// Index Rotation for the Amazon ES Destination
                                                    	// (https://docs.aws.amazon.com/firehose/latest/dev/basic-deliver.html#es-index-rotation).
                                                    	// Default value is OneDay.
                                                    	IndexRotationPeriod ElasticsearchIndexRotationPeriod
                                                    
                                                    	// The data processing configuration.
                                                    	ProcessingConfiguration *ProcessingConfiguration
                                                    
                                                    	// The retry behavior in case Kinesis Data Firehose is unable to deliver documents
                                                    	// to Amazon ES. The default value is 300 (5 minutes).
                                                    	RetryOptions *ElasticsearchRetryOptions
                                                    
                                                    	// The Amazon Resource Name (ARN) of the IAM role to be assumed by Kinesis Data
                                                    	// Firehose for calling the Amazon ES Configuration API and for indexing documents.
                                                    	// For more information, see Grant Kinesis Data Firehose Access to an Amazon S3
                                                    	// Destination
                                                    	// (https://docs.aws.amazon.com/firehose/latest/dev/controlling-access.html#using-iam-s3)
                                                    	// and Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                    	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                    	RoleARN *string
                                                    
                                                    	// The Amazon S3 destination.
                                                    	S3Update *S3DestinationUpdate
                                                    
                                                    	// The Elasticsearch type name. For Elasticsearch 6.x, there can be only one type
                                                    	// per index. If you try to specify a new type for an existing index that already
                                                    	// has another type, Kinesis Data Firehose returns an error during runtime. If you
                                                    	// upgrade Elasticsearch from 6.x to 7.x and don’t update your delivery stream,
                                                    	// Kinesis Data Firehose still delivers data to Elasticsearch with the old index
                                                    	// name and type name. If you want to update your delivery stream with a new index
                                                    	// name, provide an empty string for TypeName.
                                                    	TypeName *string
                                                    }

                                                      Describes an update for a destination in Amazon ES.

                                                      type ElasticsearchIndexRotationPeriod

                                                      type ElasticsearchIndexRotationPeriod string
                                                      const (
                                                      	ElasticsearchIndexRotationPeriodNoRotation ElasticsearchIndexRotationPeriod = "NoRotation"
                                                      	ElasticsearchIndexRotationPeriodOneHour    ElasticsearchIndexRotationPeriod = "OneHour"
                                                      	ElasticsearchIndexRotationPeriodOneDay     ElasticsearchIndexRotationPeriod = "OneDay"
                                                      	ElasticsearchIndexRotationPeriodOneWeek    ElasticsearchIndexRotationPeriod = "OneWeek"
                                                      	ElasticsearchIndexRotationPeriodOneMonth   ElasticsearchIndexRotationPeriod = "OneMonth"
                                                      )

                                                        Enum values for ElasticsearchIndexRotationPeriod

                                                        func (ElasticsearchIndexRotationPeriod) Values

                                                          Values returns all known values for ElasticsearchIndexRotationPeriod. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                          type ElasticsearchRetryOptions

                                                          type ElasticsearchRetryOptions struct {
                                                          
                                                          	// After an initial failure to deliver to Amazon ES, the total amount of time
                                                          	// during which Kinesis Data Firehose retries delivery (including the first
                                                          	// attempt). After this time has elapsed, the failed documents are written to
                                                          	// Amazon S3. Default value is 300 seconds (5 minutes). A value of 0 (zero) results
                                                          	// in no retries.
                                                          	DurationInSeconds *int32
                                                          }

                                                            Configures retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon ES.

                                                            type ElasticsearchS3BackupMode

                                                            type ElasticsearchS3BackupMode string
                                                            const (
                                                            	ElasticsearchS3BackupModeFailedDocumentsOnly ElasticsearchS3BackupMode = "FailedDocumentsOnly"
                                                            	ElasticsearchS3BackupModeAllDocuments        ElasticsearchS3BackupMode = "AllDocuments"
                                                            )

                                                              Enum values for ElasticsearchS3BackupMode

                                                              func (ElasticsearchS3BackupMode) Values

                                                                Values returns all known values for ElasticsearchS3BackupMode. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                type EncryptionConfiguration

                                                                type EncryptionConfiguration struct {
                                                                
                                                                	// The encryption key.
                                                                	KMSEncryptionConfig *KMSEncryptionConfig
                                                                
                                                                	// Specifically override existing encryption information to ensure that no
                                                                	// encryption is used.
                                                                	NoEncryptionConfig NoEncryptionConfig
                                                                }

                                                                  Describes the encryption for a destination in Amazon S3.

                                                                  type ExtendedS3DestinationConfiguration

                                                                  type ExtendedS3DestinationConfiguration struct {
                                                                  
                                                                  	// The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs)
                                                                  	// and AWS Service Namespaces
                                                                  	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                  	//
                                                                  	// This member is required.
                                                                  	BucketARN *string
                                                                  
                                                                  	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                  	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                  	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                  	//
                                                                  	// This member is required.
                                                                  	RoleARN *string
                                                                  
                                                                  	// The buffering option.
                                                                  	BufferingHints *BufferingHints
                                                                  
                                                                  	// The Amazon CloudWatch logging options for your delivery stream.
                                                                  	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                  
                                                                  	// The compression format. If no value is specified, the default is UNCOMPRESSED.
                                                                  	CompressionFormat CompressionFormat
                                                                  
                                                                  	// The serializer, deserializer, and schema for converting data from the JSON
                                                                  	// format to the Parquet or ORC format before writing it to Amazon S3.
                                                                  	DataFormatConversionConfiguration *DataFormatConversionConfiguration
                                                                  
                                                                  	// The encryption configuration. If no value is specified, the default is no
                                                                  	// encryption.
                                                                  	EncryptionConfiguration *EncryptionConfiguration
                                                                  
                                                                  	// A prefix that Kinesis Data Firehose evaluates and adds to failed records before
                                                                  	// writing them to S3. This prefix appears immediately following the bucket name.
                                                                  	// For information about how to specify this prefix, see Custom Prefixes for Amazon
                                                                  	// S3 Objects (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                  	ErrorOutputPrefix *string
                                                                  
                                                                  	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
                                                                  	// Amazon S3 files. You can also specify a custom prefix, as described in Custom
                                                                  	// Prefixes for Amazon S3 Objects
                                                                  	// (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                  	Prefix *string
                                                                  
                                                                  	// The data processing configuration.
                                                                  	ProcessingConfiguration *ProcessingConfiguration
                                                                  
                                                                  	// The configuration for backup in Amazon S3.
                                                                  	S3BackupConfiguration *S3DestinationConfiguration
                                                                  
                                                                  	// The Amazon S3 backup mode. After you create a delivery stream, you can update it
                                                                  	// to enable Amazon S3 backup if it is disabled. If backup is enabled, you can't
                                                                  	// update the delivery stream to disable it.
                                                                  	S3BackupMode S3BackupMode
                                                                  }

                                                                    Describes the configuration of a destination in Amazon S3.

                                                                    type ExtendedS3DestinationDescription

                                                                    type ExtendedS3DestinationDescription struct {
                                                                    
                                                                    	// The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs)
                                                                    	// and AWS Service Namespaces
                                                                    	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                    	//
                                                                    	// This member is required.
                                                                    	BucketARN *string
                                                                    
                                                                    	// The buffering option.
                                                                    	//
                                                                    	// This member is required.
                                                                    	BufferingHints *BufferingHints
                                                                    
                                                                    	// The compression format. If no value is specified, the default is UNCOMPRESSED.
                                                                    	//
                                                                    	// This member is required.
                                                                    	CompressionFormat CompressionFormat
                                                                    
                                                                    	// The encryption configuration. If no value is specified, the default is no
                                                                    	// encryption.
                                                                    	//
                                                                    	// This member is required.
                                                                    	EncryptionConfiguration *EncryptionConfiguration
                                                                    
                                                                    	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                    	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                    	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                    	//
                                                                    	// This member is required.
                                                                    	RoleARN *string
                                                                    
                                                                    	// The Amazon CloudWatch logging options for your delivery stream.
                                                                    	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                    
                                                                    	// The serializer, deserializer, and schema for converting data from the JSON
                                                                    	// format to the Parquet or ORC format before writing it to Amazon S3.
                                                                    	DataFormatConversionConfiguration *DataFormatConversionConfiguration
                                                                    
                                                                    	// A prefix that Kinesis Data Firehose evaluates and adds to failed records before
                                                                    	// writing them to S3. This prefix appears immediately following the bucket name.
                                                                    	// For information about how to specify this prefix, see Custom Prefixes for Amazon
                                                                    	// S3 Objects (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                    	ErrorOutputPrefix *string
                                                                    
                                                                    	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
                                                                    	// Amazon S3 files. You can also specify a custom prefix, as described in Custom
                                                                    	// Prefixes for Amazon S3 Objects
                                                                    	// (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                    	Prefix *string
                                                                    
                                                                    	// The data processing configuration.
                                                                    	ProcessingConfiguration *ProcessingConfiguration
                                                                    
                                                                    	// The configuration for backup in Amazon S3.
                                                                    	S3BackupDescription *S3DestinationDescription
                                                                    
                                                                    	// The Amazon S3 backup mode.
                                                                    	S3BackupMode S3BackupMode
                                                                    }

                                                                      Describes a destination in Amazon S3.

                                                                      type ExtendedS3DestinationUpdate

                                                                      type ExtendedS3DestinationUpdate struct {
                                                                      
                                                                      	// The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs)
                                                                      	// and AWS Service Namespaces
                                                                      	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                      	BucketARN *string
                                                                      
                                                                      	// The buffering option.
                                                                      	BufferingHints *BufferingHints
                                                                      
                                                                      	// The Amazon CloudWatch logging options for your delivery stream.
                                                                      	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                      
                                                                      	// The compression format. If no value is specified, the default is UNCOMPRESSED.
                                                                      	CompressionFormat CompressionFormat
                                                                      
                                                                      	// The serializer, deserializer, and schema for converting data from the JSON
                                                                      	// format to the Parquet or ORC format before writing it to Amazon S3.
                                                                      	DataFormatConversionConfiguration *DataFormatConversionConfiguration
                                                                      
                                                                      	// The encryption configuration. If no value is specified, the default is no
                                                                      	// encryption.
                                                                      	EncryptionConfiguration *EncryptionConfiguration
                                                                      
                                                                      	// A prefix that Kinesis Data Firehose evaluates and adds to failed records before
                                                                      	// writing them to S3. This prefix appears immediately following the bucket name.
                                                                      	// For information about how to specify this prefix, see Custom Prefixes for Amazon
                                                                      	// S3 Objects (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                      	ErrorOutputPrefix *string
                                                                      
                                                                      	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
                                                                      	// Amazon S3 files. You can also specify a custom prefix, as described in Custom
                                                                      	// Prefixes for Amazon S3 Objects
                                                                      	// (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                      	Prefix *string
                                                                      
                                                                      	// The data processing configuration.
                                                                      	ProcessingConfiguration *ProcessingConfiguration
                                                                      
                                                                      	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                      	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                      	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                      	RoleARN *string
                                                                      
                                                                      	// You can update a delivery stream to enable Amazon S3 backup if it is disabled.
                                                                      	// If backup is enabled, you can't update the delivery stream to disable it.
                                                                      	S3BackupMode S3BackupMode
                                                                      
                                                                      	// The Amazon S3 destination for backup.
                                                                      	S3BackupUpdate *S3DestinationUpdate
                                                                      }

                                                                        Describes an update for a destination in Amazon S3.

                                                                        type FailureDescription

                                                                        type FailureDescription struct {
                                                                        
                                                                        	// A message providing details about the error that caused the failure.
                                                                        	//
                                                                        	// This member is required.
                                                                        	Details *string
                                                                        
                                                                        	// The type of error that caused the failure.
                                                                        	//
                                                                        	// This member is required.
                                                                        	Type DeliveryStreamFailureType
                                                                        }

                                                                          Provides details in case one of the following operations fails due to an error related to KMS: CreateDeliveryStream, DeleteDeliveryStream, StartDeliveryStreamEncryption, StopDeliveryStreamEncryption.

                                                                          type HECEndpointType

                                                                          type HECEndpointType string
                                                                          const (
                                                                          	HECEndpointTypeRaw   HECEndpointType = "Raw"
                                                                          	HECEndpointTypeEvent HECEndpointType = "Event"
                                                                          )

                                                                            Enum values for HECEndpointType

                                                                            func (HECEndpointType) Values

                                                                            func (HECEndpointType) Values() []HECEndpointType

                                                                              Values returns all known values for HECEndpointType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                              type HiveJsonSerDe

                                                                              type HiveJsonSerDe struct {
                                                                              
                                                                              	// Indicates how you want Kinesis Data Firehose to parse the date and timestamps
                                                                              	// that may be present in your input data JSON. To specify these format strings,
                                                                              	// follow the pattern syntax of JodaTime's DateTimeFormat format strings. For more
                                                                              	// information, see Class DateTimeFormat
                                                                              	// (https://www.joda.org/joda-time/apidocs/org/joda/time/format/DateTimeFormat.html).
                                                                              	// You can also use the special value millis to parse timestamps in epoch
                                                                              	// milliseconds. If you don't specify a format, Kinesis Data Firehose uses
                                                                              	// java.sql.Timestamp::valueOf by default.
                                                                              	TimestampFormats []string
                                                                              }

                                                                                The native Hive / HCatalog JsonSerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the OpenX SerDe.

                                                                                type HttpEndpointBufferingHints

                                                                                type HttpEndpointBufferingHints struct {
                                                                                
                                                                                	// Buffer incoming data for the specified period of time, in seconds, before
                                                                                	// delivering it to the destination. The default value is 300 (5 minutes).
                                                                                	IntervalInSeconds *int32
                                                                                
                                                                                	// Buffer incoming data to the specified size, in MBs, before delivering it to the
                                                                                	// destination. The default value is 5. We recommend setting this parameter to a
                                                                                	// value greater than the amount of data you typically ingest into the delivery
                                                                                	// stream in 10 seconds. For example, if you typically ingest data at 1 MB/sec, the
                                                                                	// value should be 10 MB or higher.
                                                                                	SizeInMBs *int32
                                                                                }

                                                                                  Describes the buffering options that can be applied before data is delivered to the HTTP endpoint destination. Kinesis Data Firehose treats these options as hints, and it might choose to use more optimal values. The SizeInMBs and IntervalInSeconds parameters are optional. However, if specify a value for one of them, you must also provide a value for the other.

                                                                                  type HttpEndpointCommonAttribute

                                                                                  type HttpEndpointCommonAttribute struct {
                                                                                  
                                                                                  	// The name of the HTTP endpoint common attribute.
                                                                                  	//
                                                                                  	// This member is required.
                                                                                  	AttributeName *string
                                                                                  
                                                                                  	// The value of the HTTP endpoint common attribute.
                                                                                  	//
                                                                                  	// This member is required.
                                                                                  	AttributeValue *string
                                                                                  }

                                                                                    Describes the metadata that's delivered to the specified HTTP endpoint destination.

                                                                                    type HttpEndpointConfiguration

                                                                                    type HttpEndpointConfiguration struct {
                                                                                    
                                                                                    	// The URL of the HTTP endpoint selected as the destination.
                                                                                    	//
                                                                                    	// This member is required.
                                                                                    	Url *string
                                                                                    
                                                                                    	// The access key required for Kinesis Firehose to authenticate with the HTTP
                                                                                    	// endpoint selected as the destination.
                                                                                    	AccessKey *string
                                                                                    
                                                                                    	// The name of the HTTP endpoint selected as the destination.
                                                                                    	Name *string
                                                                                    }

                                                                                      Describes the configuration of the HTTP endpoint to which Kinesis Firehose delivers data.

                                                                                      type HttpEndpointDescription

                                                                                      type HttpEndpointDescription struct {
                                                                                      
                                                                                      	// The name of the HTTP endpoint selected as the destination.
                                                                                      	Name *string
                                                                                      
                                                                                      	// The URL of the HTTP endpoint selected as the destination.
                                                                                      	Url *string
                                                                                      }

                                                                                        Describes the HTTP endpoint selected as the destination.

                                                                                        type HttpEndpointDestinationConfiguration

                                                                                        type HttpEndpointDestinationConfiguration struct {
                                                                                        
                                                                                        	// The configuration of the HTTP endpoint selected as the destination.
                                                                                        	//
                                                                                        	// This member is required.
                                                                                        	EndpointConfiguration *HttpEndpointConfiguration
                                                                                        
                                                                                        	// Describes the configuration of a destination in Amazon S3.
                                                                                        	//
                                                                                        	// This member is required.
                                                                                        	S3Configuration *S3DestinationConfiguration
                                                                                        
                                                                                        	// The buffering options that can be used before data is delivered to the specified
                                                                                        	// destination. Kinesis Data Firehose treats these options as hints, and it might
                                                                                        	// choose to use more optimal values. The SizeInMBs and IntervalInSeconds
                                                                                        	// parameters are optional. However, if you specify a value for one of them, you
                                                                                        	// must also provide a value for the other.
                                                                                        	BufferingHints *HttpEndpointBufferingHints
                                                                                        
                                                                                        	// Describes the Amazon CloudWatch logging options for your delivery stream.
                                                                                        	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                        
                                                                                        	// Describes a data processing configuration.
                                                                                        	ProcessingConfiguration *ProcessingConfiguration
                                                                                        
                                                                                        	// The configuration of the requeste sent to the HTTP endpoint specified as the
                                                                                        	// destination.
                                                                                        	RequestConfiguration *HttpEndpointRequestConfiguration
                                                                                        
                                                                                        	// Describes the retry behavior in case Kinesis Data Firehose is unable to deliver
                                                                                        	// data to the specified HTTP endpoint destination, or if it doesn't receive a
                                                                                        	// valid acknowledgment of receipt from the specified HTTP endpoint destination.
                                                                                        	RetryOptions *HttpEndpointRetryOptions
                                                                                        
                                                                                        	// Kinesis Data Firehose uses this IAM role for all the permissions that the
                                                                                        	// delivery stream needs.
                                                                                        	RoleARN *string
                                                                                        
                                                                                        	// Describes the S3 bucket backup options for the data that Kinesis Data Firehose
                                                                                        	// delivers to the HTTP endpoint destination. You can back up all documents
                                                                                        	// (AllData) or only the documents that Kinesis Data Firehose could not deliver to
                                                                                        	// the specified HTTP endpoint destination (FailedDataOnly).
                                                                                        	S3BackupMode HttpEndpointS3BackupMode
                                                                                        }

                                                                                          Describes the configuration of the HTTP endpoint destination.

                                                                                          type HttpEndpointDestinationDescription

                                                                                          type HttpEndpointDestinationDescription struct {
                                                                                          
                                                                                          	// Describes buffering options that can be applied to the data before it is
                                                                                          	// delivered to the HTTPS endpoint destination. Kinesis Data Firehose teats these
                                                                                          	// options as hints, and it might choose to use more optimal values. The SizeInMBs
                                                                                          	// and IntervalInSeconds parameters are optional. However, if specify a value for
                                                                                          	// one of them, you must also provide a value for the other.
                                                                                          	BufferingHints *HttpEndpointBufferingHints
                                                                                          
                                                                                          	// Describes the Amazon CloudWatch logging options for your delivery stream.
                                                                                          	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                          
                                                                                          	// The configuration of the specified HTTP endpoint destination.
                                                                                          	EndpointConfiguration *HttpEndpointDescription
                                                                                          
                                                                                          	// Describes a data processing configuration.
                                                                                          	ProcessingConfiguration *ProcessingConfiguration
                                                                                          
                                                                                          	// The configuration of request sent to the HTTP endpoint specified as the
                                                                                          	// destination.
                                                                                          	RequestConfiguration *HttpEndpointRequestConfiguration
                                                                                          
                                                                                          	// Describes the retry behavior in case Kinesis Data Firehose is unable to deliver
                                                                                          	// data to the specified HTTP endpoint destination, or if it doesn't receive a
                                                                                          	// valid acknowledgment of receipt from the specified HTTP endpoint destination.
                                                                                          	RetryOptions *HttpEndpointRetryOptions
                                                                                          
                                                                                          	// Kinesis Data Firehose uses this IAM role for all the permissions that the
                                                                                          	// delivery stream needs.
                                                                                          	RoleARN *string
                                                                                          
                                                                                          	// Describes the S3 bucket backup options for the data that Kinesis Firehose
                                                                                          	// delivers to the HTTP endpoint destination. You can back up all documents
                                                                                          	// (AllData) or only the documents that Kinesis Data Firehose could not deliver to
                                                                                          	// the specified HTTP endpoint destination (FailedDataOnly).
                                                                                          	S3BackupMode HttpEndpointS3BackupMode
                                                                                          
                                                                                          	// Describes a destination in Amazon S3.
                                                                                          	S3DestinationDescription *S3DestinationDescription
                                                                                          }

                                                                                            Describes the HTTP endpoint destination.

                                                                                            type HttpEndpointDestinationUpdate

                                                                                            type HttpEndpointDestinationUpdate struct {
                                                                                            
                                                                                            	// Describes buffering options that can be applied to the data before it is
                                                                                            	// delivered to the HTTPS endpoint destination. Kinesis Data Firehose teats these
                                                                                            	// options as hints, and it might choose to use more optimal values. The SizeInMBs
                                                                                            	// and IntervalInSeconds parameters are optional. However, if specify a value for
                                                                                            	// one of them, you must also provide a value for the other.
                                                                                            	BufferingHints *HttpEndpointBufferingHints
                                                                                            
                                                                                            	// Describes the Amazon CloudWatch logging options for your delivery stream.
                                                                                            	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                            
                                                                                            	// Describes the configuration of the HTTP endpoint destination.
                                                                                            	EndpointConfiguration *HttpEndpointConfiguration
                                                                                            
                                                                                            	// Describes a data processing configuration.
                                                                                            	ProcessingConfiguration *ProcessingConfiguration
                                                                                            
                                                                                            	// The configuration of the request sent to the HTTP endpoint specified as the
                                                                                            	// destination.
                                                                                            	RequestConfiguration *HttpEndpointRequestConfiguration
                                                                                            
                                                                                            	// Describes the retry behavior in case Kinesis Data Firehose is unable to deliver
                                                                                            	// data to the specified HTTP endpoint destination, or if it doesn't receive a
                                                                                            	// valid acknowledgment of receipt from the specified HTTP endpoint destination.
                                                                                            	RetryOptions *HttpEndpointRetryOptions
                                                                                            
                                                                                            	// Kinesis Data Firehose uses this IAM role for all the permissions that the
                                                                                            	// delivery stream needs.
                                                                                            	RoleARN *string
                                                                                            
                                                                                            	// Describes the S3 bucket backup options for the data that Kinesis Firehose
                                                                                            	// delivers to the HTTP endpoint destination. You can back up all documents
                                                                                            	// (AllData) or only the documents that Kinesis Data Firehose could not deliver to
                                                                                            	// the specified HTTP endpoint destination (FailedDataOnly).
                                                                                            	S3BackupMode HttpEndpointS3BackupMode
                                                                                            
                                                                                            	// Describes an update for a destination in Amazon S3.
                                                                                            	S3Update *S3DestinationUpdate
                                                                                            }

                                                                                              Updates the specified HTTP endpoint destination.

                                                                                              type HttpEndpointRequestConfiguration

                                                                                              type HttpEndpointRequestConfiguration struct {
                                                                                              
                                                                                              	// Describes the metadata sent to the HTTP endpoint destination.
                                                                                              	CommonAttributes []HttpEndpointCommonAttribute
                                                                                              
                                                                                              	// Kinesis Data Firehose uses the content encoding to compress the body of a
                                                                                              	// request before sending the request to the destination. For more information, see
                                                                                              	// Content-Encoding
                                                                                              	// (https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Encoding) in
                                                                                              	// MDN Web Docs, the official Mozilla documentation.
                                                                                              	ContentEncoding ContentEncoding
                                                                                              }

                                                                                                The configuration of the HTTP endpoint request.

                                                                                                type HttpEndpointRetryOptions

                                                                                                type HttpEndpointRetryOptions struct {
                                                                                                
                                                                                                	// The total amount of time that Kinesis Data Firehose spends on retries. This
                                                                                                	// duration starts after the initial attempt to send data to the custom destination
                                                                                                	// via HTTPS endpoint fails. It doesn't include the periods during which Kinesis
                                                                                                	// Data Firehose waits for acknowledgment from the specified destination after each
                                                                                                	// attempt.
                                                                                                	DurationInSeconds *int32
                                                                                                }

                                                                                                  Describes the retry behavior in case Kinesis Data Firehose is unable to deliver data to the specified HTTP endpoint destination, or if it doesn't receive a valid acknowledgment of receipt from the specified HTTP endpoint destination.

                                                                                                  type HttpEndpointS3BackupMode

                                                                                                  type HttpEndpointS3BackupMode string
                                                                                                  const (
                                                                                                  	HttpEndpointS3BackupModeFailedDataOnly HttpEndpointS3BackupMode = "FailedDataOnly"
                                                                                                  	HttpEndpointS3BackupModeAllData        HttpEndpointS3BackupMode = "AllData"
                                                                                                  )

                                                                                                    Enum values for HttpEndpointS3BackupMode

                                                                                                    func (HttpEndpointS3BackupMode) Values

                                                                                                      Values returns all known values for HttpEndpointS3BackupMode. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                      type InputFormatConfiguration

                                                                                                      type InputFormatConfiguration struct {
                                                                                                      
                                                                                                      	// Specifies which deserializer to use. You can choose either the Apache Hive JSON
                                                                                                      	// SerDe or the OpenX JSON SerDe. If both are non-null, the server rejects the
                                                                                                      	// request.
                                                                                                      	Deserializer *Deserializer
                                                                                                      }

                                                                                                        Specifies the deserializer you want to use to convert the format of the input data. This parameter is required if Enabled is set to true.

                                                                                                        type InvalidArgumentException

                                                                                                        type InvalidArgumentException struct {
                                                                                                        	Message *string
                                                                                                        }

                                                                                                          The specified input parameter has a value that is not valid.

                                                                                                          func (*InvalidArgumentException) Error

                                                                                                          func (e *InvalidArgumentException) Error() string

                                                                                                          func (*InvalidArgumentException) ErrorCode

                                                                                                          func (e *InvalidArgumentException) ErrorCode() string

                                                                                                          func (*InvalidArgumentException) ErrorFault

                                                                                                          func (e *InvalidArgumentException) ErrorFault() smithy.ErrorFault

                                                                                                          func (*InvalidArgumentException) ErrorMessage

                                                                                                          func (e *InvalidArgumentException) ErrorMessage() string

                                                                                                          type InvalidKMSResourceException

                                                                                                          type InvalidKMSResourceException struct {
                                                                                                          	Message *string
                                                                                                          
                                                                                                          	Code *string
                                                                                                          }

                                                                                                            Kinesis Data Firehose throws this exception when an attempt to put records or to start or stop delivery stream encryption fails. This happens when the KMS service throws one of the following exception types: AccessDeniedException, InvalidStateException, DisabledException, or NotFoundException.

                                                                                                            func (*InvalidKMSResourceException) Error

                                                                                                            func (*InvalidKMSResourceException) ErrorCode

                                                                                                            func (e *InvalidKMSResourceException) ErrorCode() string

                                                                                                            func (*InvalidKMSResourceException) ErrorFault

                                                                                                            func (*InvalidKMSResourceException) ErrorMessage

                                                                                                            func (e *InvalidKMSResourceException) ErrorMessage() string

                                                                                                            type KMSEncryptionConfig

                                                                                                            type KMSEncryptionConfig struct {
                                                                                                            
                                                                                                            	// The Amazon Resource Name (ARN) of the encryption key. Must belong to the same
                                                                                                            	// AWS Region as the destination Amazon S3 bucket. For more information, see Amazon
                                                                                                            	// Resource Names (ARNs) and AWS Service Namespaces
                                                                                                            	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                            	//
                                                                                                            	// This member is required.
                                                                                                            	AWSKMSKeyARN *string
                                                                                                            }

                                                                                                              Describes an encryption key for a destination in Amazon S3.

                                                                                                              type KeyType

                                                                                                              type KeyType string
                                                                                                              const (
                                                                                                              	KeyTypeAwsOwnedCmk        KeyType = "AWS_OWNED_CMK"
                                                                                                              	KeyTypeCustomerManagedCmk KeyType = "CUSTOMER_MANAGED_CMK"
                                                                                                              )

                                                                                                                Enum values for KeyType

                                                                                                                func (KeyType) Values

                                                                                                                func (KeyType) Values() []KeyType

                                                                                                                  Values returns all known values for KeyType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                  type KinesisStreamSourceConfiguration

                                                                                                                  type KinesisStreamSourceConfiguration struct {
                                                                                                                  
                                                                                                                  	// The ARN of the source Kinesis data stream. For more information, see Amazon
                                                                                                                  	// Kinesis Data Streams ARN Format
                                                                                                                  	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-kinesis-streams).
                                                                                                                  	//
                                                                                                                  	// This member is required.
                                                                                                                  	KinesisStreamARN *string
                                                                                                                  
                                                                                                                  	// The ARN of the role that provides access to the source Kinesis data stream. For
                                                                                                                  	// more information, see AWS Identity and Access Management (IAM) ARN Format
                                                                                                                  	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-iam).
                                                                                                                  	//
                                                                                                                  	// This member is required.
                                                                                                                  	RoleARN *string
                                                                                                                  }

                                                                                                                    The stream and role Amazon Resource Names (ARNs) for a Kinesis data stream used as the source for a delivery stream.

                                                                                                                    type KinesisStreamSourceDescription

                                                                                                                    type KinesisStreamSourceDescription struct {
                                                                                                                    
                                                                                                                    	// Kinesis Data Firehose starts retrieving records from the Kinesis data stream
                                                                                                                    	// starting with this timestamp.
                                                                                                                    	DeliveryStartTimestamp *time.Time
                                                                                                                    
                                                                                                                    	// The Amazon Resource Name (ARN) of the source Kinesis data stream. For more
                                                                                                                    	// information, see Amazon Kinesis Data Streams ARN Format
                                                                                                                    	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-kinesis-streams).
                                                                                                                    	KinesisStreamARN *string
                                                                                                                    
                                                                                                                    	// The ARN of the role used by the source Kinesis data stream. For more
                                                                                                                    	// information, see AWS Identity and Access Management (IAM) ARN Format
                                                                                                                    	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html#arn-syntax-iam).
                                                                                                                    	RoleARN *string
                                                                                                                    }

                                                                                                                      Details about a Kinesis data stream used as the source for a Kinesis Data Firehose delivery stream.

                                                                                                                      type LimitExceededException

                                                                                                                      type LimitExceededException struct {
                                                                                                                      	Message *string
                                                                                                                      }

                                                                                                                        You have already reached the limit for a requested resource.

                                                                                                                        func (*LimitExceededException) Error

                                                                                                                        func (e *LimitExceededException) Error() string

                                                                                                                        func (*LimitExceededException) ErrorCode

                                                                                                                        func (e *LimitExceededException) ErrorCode() string

                                                                                                                        func (*LimitExceededException) ErrorFault

                                                                                                                        func (e *LimitExceededException) ErrorFault() smithy.ErrorFault

                                                                                                                        func (*LimitExceededException) ErrorMessage

                                                                                                                        func (e *LimitExceededException) ErrorMessage() string

                                                                                                                        type NoEncryptionConfig

                                                                                                                        type NoEncryptionConfig string
                                                                                                                        const (
                                                                                                                        	NoEncryptionConfigNoEncryption NoEncryptionConfig = "NoEncryption"
                                                                                                                        )

                                                                                                                          Enum values for NoEncryptionConfig

                                                                                                                          func (NoEncryptionConfig) Values

                                                                                                                            Values returns all known values for NoEncryptionConfig. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                            type OpenXJsonSerDe

                                                                                                                            type OpenXJsonSerDe struct {
                                                                                                                            
                                                                                                                            	// When set to true, which is the default, Kinesis Data Firehose converts JSON keys
                                                                                                                            	// to lowercase before deserializing them.
                                                                                                                            	CaseInsensitive *bool
                                                                                                                            
                                                                                                                            	// Maps column names to JSON keys that aren't identical to the column names. This
                                                                                                                            	// is useful when the JSON contains keys that are Hive keywords. For example,
                                                                                                                            	// timestamp is a Hive keyword. If you have a JSON key named timestamp, set this
                                                                                                                            	// parameter to {"ts": "timestamp"} to map this key to a column named ts.
                                                                                                                            	ColumnToJsonKeyMappings map[string]string
                                                                                                                            
                                                                                                                            	// When set to true, specifies that the names of the keys include dots and that you
                                                                                                                            	// want Kinesis Data Firehose to replace them with underscores. This is useful
                                                                                                                            	// because Apache Hive does not allow dots in column names. For example, if the
                                                                                                                            	// JSON contains a key whose name is "a.b", you can define the column name to be
                                                                                                                            	// "a_b" when using this option. The default is false.
                                                                                                                            	ConvertDotsInJsonKeysToUnderscores *bool
                                                                                                                            }

                                                                                                                              The OpenX SerDe. Used by Kinesis Data Firehose for deserializing data, which means converting it from the JSON format in preparation for serializing it to the Parquet or ORC format. This is one of two deserializers you can choose, depending on which one offers the functionality you need. The other option is the native Hive / HCatalog JsonSerDe.

                                                                                                                              type OrcCompression

                                                                                                                              type OrcCompression string
                                                                                                                              const (
                                                                                                                              	OrcCompressionNone   OrcCompression = "NONE"
                                                                                                                              	OrcCompressionZlib   OrcCompression = "ZLIB"
                                                                                                                              	OrcCompressionSnappy OrcCompression = "SNAPPY"
                                                                                                                              )

                                                                                                                                Enum values for OrcCompression

                                                                                                                                func (OrcCompression) Values

                                                                                                                                func (OrcCompression) Values() []OrcCompression

                                                                                                                                  Values returns all known values for OrcCompression. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                  type OrcFormatVersion

                                                                                                                                  type OrcFormatVersion string
                                                                                                                                  const (
                                                                                                                                  	OrcFormatVersionV011 OrcFormatVersion = "V0_11"
                                                                                                                                  	OrcFormatVersionV012 OrcFormatVersion = "V0_12"
                                                                                                                                  )

                                                                                                                                    Enum values for OrcFormatVersion

                                                                                                                                    func (OrcFormatVersion) Values

                                                                                                                                      Values returns all known values for OrcFormatVersion. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                      type OrcSerDe

                                                                                                                                      type OrcSerDe struct {
                                                                                                                                      
                                                                                                                                      	// The Hadoop Distributed File System (HDFS) block size. This is useful if you
                                                                                                                                      	// intend to copy the data from Amazon S3 to HDFS before querying. The default is
                                                                                                                                      	// 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for
                                                                                                                                      	// padding calculations.
                                                                                                                                      	BlockSizeBytes *int32
                                                                                                                                      
                                                                                                                                      	// The column names for which you want Kinesis Data Firehose to create bloom
                                                                                                                                      	// filters. The default is null.
                                                                                                                                      	BloomFilterColumns []string
                                                                                                                                      
                                                                                                                                      	// The Bloom filter false positive probability (FPP). The lower the FPP, the bigger
                                                                                                                                      	// the Bloom filter. The default value is 0.05, the minimum is 0, and the maximum
                                                                                                                                      	// is 1.
                                                                                                                                      	BloomFilterFalsePositiveProbability *float64
                                                                                                                                      
                                                                                                                                      	// The compression code to use over data blocks. The default is SNAPPY.
                                                                                                                                      	Compression OrcCompression
                                                                                                                                      
                                                                                                                                      	// Represents the fraction of the total number of non-null rows. To turn off
                                                                                                                                      	// dictionary encoding, set this fraction to a number that is less than the number
                                                                                                                                      	// of distinct keys in a dictionary. To always use dictionary encoding, set this
                                                                                                                                      	// threshold to 1.
                                                                                                                                      	DictionaryKeyThreshold *float64
                                                                                                                                      
                                                                                                                                      	// Set this to true to indicate that you want stripes to be padded to the HDFS
                                                                                                                                      	// block boundaries. This is useful if you intend to copy the data from Amazon S3
                                                                                                                                      	// to HDFS before querying. The default is false.
                                                                                                                                      	EnablePadding *bool
                                                                                                                                      
                                                                                                                                      	// The version of the file to write. The possible values are V0_11 and V0_12. The
                                                                                                                                      	// default is V0_12.
                                                                                                                                      	FormatVersion OrcFormatVersion
                                                                                                                                      
                                                                                                                                      	// A number between 0 and 1 that defines the tolerance for block padding as a
                                                                                                                                      	// decimal fraction of stripe size. The default value is 0.05, which means 5
                                                                                                                                      	// percent of stripe size. For the default values of 64 MiB ORC stripes and 256 MiB
                                                                                                                                      	// HDFS blocks, the default block padding tolerance of 5 percent reserves a maximum
                                                                                                                                      	// of 3.2 MiB for padding within the 256 MiB block. In such a case, if the
                                                                                                                                      	// available size within the block is more than 3.2 MiB, a new, smaller stripe is
                                                                                                                                      	// inserted to fit within that space. This ensures that no stripe crosses block
                                                                                                                                      	// boundaries and causes remote reads within a node-local task. Kinesis Data
                                                                                                                                      	// Firehose ignores this parameter when OrcSerDe$EnablePadding is false.
                                                                                                                                      	PaddingTolerance *float64
                                                                                                                                      
                                                                                                                                      	// The number of rows between index entries. The default is 10,000 and the minimum
                                                                                                                                      	// is 1,000.
                                                                                                                                      	RowIndexStride *int32
                                                                                                                                      
                                                                                                                                      	// The number of bytes in each stripe. The default is 64 MiB and the minimum is 8
                                                                                                                                      	// MiB.
                                                                                                                                      	StripeSizeBytes *int32
                                                                                                                                      }

                                                                                                                                        A serializer to use for converting data to the ORC format before storing it in Amazon S3. For more information, see Apache ORC (https://orc.apache.org/docs/).

                                                                                                                                        type OutputFormatConfiguration

                                                                                                                                        type OutputFormatConfiguration struct {
                                                                                                                                        
                                                                                                                                        	// Specifies which serializer to use. You can choose either the ORC SerDe or the
                                                                                                                                        	// Parquet SerDe. If both are non-null, the server rejects the request.
                                                                                                                                        	Serializer *Serializer
                                                                                                                                        }

                                                                                                                                          Specifies the serializer that you want Kinesis Data Firehose to use to convert the format of your data before it writes it to Amazon S3. This parameter is required if Enabled is set to true.

                                                                                                                                          type ParquetCompression

                                                                                                                                          type ParquetCompression string
                                                                                                                                          const (
                                                                                                                                          	ParquetCompressionUncompressed ParquetCompression = "UNCOMPRESSED"
                                                                                                                                          	ParquetCompressionGzip         ParquetCompression = "GZIP"
                                                                                                                                          	ParquetCompressionSnappy       ParquetCompression = "SNAPPY"
                                                                                                                                          )

                                                                                                                                            Enum values for ParquetCompression

                                                                                                                                            func (ParquetCompression) Values

                                                                                                                                              Values returns all known values for ParquetCompression. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                              type ParquetSerDe

                                                                                                                                              type ParquetSerDe struct {
                                                                                                                                              
                                                                                                                                              	// The Hadoop Distributed File System (HDFS) block size. This is useful if you
                                                                                                                                              	// intend to copy the data from Amazon S3 to HDFS before querying. The default is
                                                                                                                                              	// 256 MiB and the minimum is 64 MiB. Kinesis Data Firehose uses this value for
                                                                                                                                              	// padding calculations.
                                                                                                                                              	BlockSizeBytes *int32
                                                                                                                                              
                                                                                                                                              	// The compression code to use over data blocks. The possible values are
                                                                                                                                              	// UNCOMPRESSED, SNAPPY, and GZIP, with the default being SNAPPY. Use SNAPPY for
                                                                                                                                              	// higher decompression speed. Use GZIP if the compression ratio is more important
                                                                                                                                              	// than speed.
                                                                                                                                              	Compression ParquetCompression
                                                                                                                                              
                                                                                                                                              	// Indicates whether to enable dictionary compression.
                                                                                                                                              	EnableDictionaryCompression *bool
                                                                                                                                              
                                                                                                                                              	// The maximum amount of padding to apply. This is useful if you intend to copy the
                                                                                                                                              	// data from Amazon S3 to HDFS before querying. The default is 0.
                                                                                                                                              	MaxPaddingBytes *int32
                                                                                                                                              
                                                                                                                                              	// The Parquet page size. Column chunks are divided into pages. A page is
                                                                                                                                              	// conceptually an indivisible unit (in terms of compression and encoding). The
                                                                                                                                              	// minimum value is 64 KiB and the default is 1 MiB.
                                                                                                                                              	PageSizeBytes *int32
                                                                                                                                              
                                                                                                                                              	// Indicates the version of row format to output. The possible values are V1 and
                                                                                                                                              	// V2. The default is V1.
                                                                                                                                              	WriterVersion ParquetWriterVersion
                                                                                                                                              }

                                                                                                                                                A serializer to use for converting data to the Parquet format before storing it in Amazon S3. For more information, see Apache Parquet (https://parquet.apache.org/documentation/latest/).

                                                                                                                                                type ParquetWriterVersion

                                                                                                                                                type ParquetWriterVersion string
                                                                                                                                                const (
                                                                                                                                                	ParquetWriterVersionV1 ParquetWriterVersion = "V1"
                                                                                                                                                	ParquetWriterVersionV2 ParquetWriterVersion = "V2"
                                                                                                                                                )

                                                                                                                                                  Enum values for ParquetWriterVersion

                                                                                                                                                  func (ParquetWriterVersion) Values

                                                                                                                                                    Values returns all known values for ParquetWriterVersion. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                                    type ProcessingConfiguration

                                                                                                                                                    type ProcessingConfiguration struct {
                                                                                                                                                    
                                                                                                                                                    	// Enables or disables data processing.
                                                                                                                                                    	Enabled *bool
                                                                                                                                                    
                                                                                                                                                    	// The data processors.
                                                                                                                                                    	Processors []Processor
                                                                                                                                                    }

                                                                                                                                                      Describes a data processing configuration.

                                                                                                                                                      type Processor

                                                                                                                                                      type Processor struct {
                                                                                                                                                      
                                                                                                                                                      	// The type of processor.
                                                                                                                                                      	//
                                                                                                                                                      	// This member is required.
                                                                                                                                                      	Type ProcessorType
                                                                                                                                                      
                                                                                                                                                      	// The processor parameters.
                                                                                                                                                      	Parameters []ProcessorParameter
                                                                                                                                                      }

                                                                                                                                                        Describes a data processor.

                                                                                                                                                        type ProcessorParameter

                                                                                                                                                        type ProcessorParameter struct {
                                                                                                                                                        
                                                                                                                                                        	// The name of the parameter.
                                                                                                                                                        	//
                                                                                                                                                        	// This member is required.
                                                                                                                                                        	ParameterName ProcessorParameterName
                                                                                                                                                        
                                                                                                                                                        	// The parameter value.
                                                                                                                                                        	//
                                                                                                                                                        	// This member is required.
                                                                                                                                                        	ParameterValue *string
                                                                                                                                                        }

                                                                                                                                                          Describes the processor parameter.

                                                                                                                                                          type ProcessorParameterName

                                                                                                                                                          type ProcessorParameterName string
                                                                                                                                                          const (
                                                                                                                                                          	ProcessorParameterNameLambdaArn               ProcessorParameterName = "LambdaArn"
                                                                                                                                                          	ProcessorParameterNameLambdaNumberOfRetries   ProcessorParameterName = "NumberOfRetries"
                                                                                                                                                          	ProcessorParameterNameRoleArn                 ProcessorParameterName = "RoleArn"
                                                                                                                                                          	ProcessorParameterNameBufferSizeInMb          ProcessorParameterName = "BufferSizeInMBs"
                                                                                                                                                          	ProcessorParameterNameBufferIntervalInSeconds ProcessorParameterName = "BufferIntervalInSeconds"
                                                                                                                                                          )

                                                                                                                                                            Enum values for ProcessorParameterName

                                                                                                                                                            func (ProcessorParameterName) Values

                                                                                                                                                              Values returns all known values for ProcessorParameterName. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                                              type ProcessorType

                                                                                                                                                              type ProcessorType string
                                                                                                                                                              const (
                                                                                                                                                              	ProcessorTypeLambda ProcessorType = "Lambda"
                                                                                                                                                              )

                                                                                                                                                                Enum values for ProcessorType

                                                                                                                                                                func (ProcessorType) Values

                                                                                                                                                                func (ProcessorType) Values() []ProcessorType

                                                                                                                                                                  Values returns all known values for ProcessorType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                                                  type PutRecordBatchResponseEntry

                                                                                                                                                                  type PutRecordBatchResponseEntry struct {
                                                                                                                                                                  
                                                                                                                                                                  	// The error code for an individual record result.
                                                                                                                                                                  	ErrorCode *string
                                                                                                                                                                  
                                                                                                                                                                  	// The error message for an individual record result.
                                                                                                                                                                  	ErrorMessage *string
                                                                                                                                                                  
                                                                                                                                                                  	// The ID of the record.
                                                                                                                                                                  	RecordId *string
                                                                                                                                                                  }

                                                                                                                                                                    Contains the result for an individual record from a PutRecordBatch request. If the record is successfully added to your delivery stream, it receives a record ID. If the record fails to be added to your delivery stream, the result includes an error code and an error message.

                                                                                                                                                                    type Record

                                                                                                                                                                    type Record struct {
                                                                                                                                                                    
                                                                                                                                                                    	// The data blob, which is base64-encoded when the blob is serialized. The maximum
                                                                                                                                                                    	// size of the data blob, before base64-encoding, is 1,000 KiB.
                                                                                                                                                                    	//
                                                                                                                                                                    	// This member is required.
                                                                                                                                                                    	Data []byte
                                                                                                                                                                    }

                                                                                                                                                                      The unit of data in a delivery stream.

                                                                                                                                                                      type RedshiftDestinationConfiguration

                                                                                                                                                                      type RedshiftDestinationConfiguration struct {
                                                                                                                                                                      
                                                                                                                                                                      	// The database connection string.
                                                                                                                                                                      	//
                                                                                                                                                                      	// This member is required.
                                                                                                                                                                      	ClusterJDBCURL *string
                                                                                                                                                                      
                                                                                                                                                                      	// The COPY command.
                                                                                                                                                                      	//
                                                                                                                                                                      	// This member is required.
                                                                                                                                                                      	CopyCommand *CopyCommand
                                                                                                                                                                      
                                                                                                                                                                      	// The user password.
                                                                                                                                                                      	//
                                                                                                                                                                      	// This member is required.
                                                                                                                                                                      	Password *string
                                                                                                                                                                      
                                                                                                                                                                      	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                                                                                                                      	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                                                                                                                      	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                      	//
                                                                                                                                                                      	// This member is required.
                                                                                                                                                                      	RoleARN *string
                                                                                                                                                                      
                                                                                                                                                                      	// The configuration for the intermediate Amazon S3 location from which Amazon
                                                                                                                                                                      	// Redshift obtains data. Restrictions are described in the topic for
                                                                                                                                                                      	// CreateDeliveryStream. The compression formats SNAPPY or ZIP cannot be specified
                                                                                                                                                                      	// in RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift
                                                                                                                                                                      	// COPY operation that reads from the S3 bucket doesn't support these compression
                                                                                                                                                                      	// formats.
                                                                                                                                                                      	//
                                                                                                                                                                      	// This member is required.
                                                                                                                                                                      	S3Configuration *S3DestinationConfiguration
                                                                                                                                                                      
                                                                                                                                                                      	// The name of the user.
                                                                                                                                                                      	//
                                                                                                                                                                      	// This member is required.
                                                                                                                                                                      	Username *string
                                                                                                                                                                      
                                                                                                                                                                      	// The CloudWatch logging options for your delivery stream.
                                                                                                                                                                      	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                      
                                                                                                                                                                      	// The data processing configuration.
                                                                                                                                                                      	ProcessingConfiguration *ProcessingConfiguration
                                                                                                                                                                      
                                                                                                                                                                      	// The retry behavior in case Kinesis Data Firehose is unable to deliver documents
                                                                                                                                                                      	// to Amazon Redshift. Default value is 3600 (60 minutes).
                                                                                                                                                                      	RetryOptions *RedshiftRetryOptions
                                                                                                                                                                      
                                                                                                                                                                      	// The configuration for backup in Amazon S3.
                                                                                                                                                                      	S3BackupConfiguration *S3DestinationConfiguration
                                                                                                                                                                      
                                                                                                                                                                      	// The Amazon S3 backup mode. After you create a delivery stream, you can update it
                                                                                                                                                                      	// to enable Amazon S3 backup if it is disabled. If backup is enabled, you can't
                                                                                                                                                                      	// update the delivery stream to disable it.
                                                                                                                                                                      	S3BackupMode RedshiftS3BackupMode
                                                                                                                                                                      }

                                                                                                                                                                        Describes the configuration of a destination in Amazon Redshift.

                                                                                                                                                                        type RedshiftDestinationDescription

                                                                                                                                                                        type RedshiftDestinationDescription struct {
                                                                                                                                                                        
                                                                                                                                                                        	// The database connection string.
                                                                                                                                                                        	//
                                                                                                                                                                        	// This member is required.
                                                                                                                                                                        	ClusterJDBCURL *string
                                                                                                                                                                        
                                                                                                                                                                        	// The COPY command.
                                                                                                                                                                        	//
                                                                                                                                                                        	// This member is required.
                                                                                                                                                                        	CopyCommand *CopyCommand
                                                                                                                                                                        
                                                                                                                                                                        	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                                                                                                                        	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                                                                                                                        	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                        	//
                                                                                                                                                                        	// This member is required.
                                                                                                                                                                        	RoleARN *string
                                                                                                                                                                        
                                                                                                                                                                        	// The Amazon S3 destination.
                                                                                                                                                                        	//
                                                                                                                                                                        	// This member is required.
                                                                                                                                                                        	S3DestinationDescription *S3DestinationDescription
                                                                                                                                                                        
                                                                                                                                                                        	// The name of the user.
                                                                                                                                                                        	//
                                                                                                                                                                        	// This member is required.
                                                                                                                                                                        	Username *string
                                                                                                                                                                        
                                                                                                                                                                        	// The Amazon CloudWatch logging options for your delivery stream.
                                                                                                                                                                        	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                        
                                                                                                                                                                        	// The data processing configuration.
                                                                                                                                                                        	ProcessingConfiguration *ProcessingConfiguration
                                                                                                                                                                        
                                                                                                                                                                        	// The retry behavior in case Kinesis Data Firehose is unable to deliver documents
                                                                                                                                                                        	// to Amazon Redshift. Default value is 3600 (60 minutes).
                                                                                                                                                                        	RetryOptions *RedshiftRetryOptions
                                                                                                                                                                        
                                                                                                                                                                        	// The configuration for backup in Amazon S3.
                                                                                                                                                                        	S3BackupDescription *S3DestinationDescription
                                                                                                                                                                        
                                                                                                                                                                        	// The Amazon S3 backup mode.
                                                                                                                                                                        	S3BackupMode RedshiftS3BackupMode
                                                                                                                                                                        }

                                                                                                                                                                          Describes a destination in Amazon Redshift.

                                                                                                                                                                          type RedshiftDestinationUpdate

                                                                                                                                                                          type RedshiftDestinationUpdate struct {
                                                                                                                                                                          
                                                                                                                                                                          	// The Amazon CloudWatch logging options for your delivery stream.
                                                                                                                                                                          	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                          
                                                                                                                                                                          	// The database connection string.
                                                                                                                                                                          	ClusterJDBCURL *string
                                                                                                                                                                          
                                                                                                                                                                          	// The COPY command.
                                                                                                                                                                          	CopyCommand *CopyCommand
                                                                                                                                                                          
                                                                                                                                                                          	// The user password.
                                                                                                                                                                          	Password *string
                                                                                                                                                                          
                                                                                                                                                                          	// The data processing configuration.
                                                                                                                                                                          	ProcessingConfiguration *ProcessingConfiguration
                                                                                                                                                                          
                                                                                                                                                                          	// The retry behavior in case Kinesis Data Firehose is unable to deliver documents
                                                                                                                                                                          	// to Amazon Redshift. Default value is 3600 (60 minutes).
                                                                                                                                                                          	RetryOptions *RedshiftRetryOptions
                                                                                                                                                                          
                                                                                                                                                                          	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                                                                                                                          	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                                                                                                                          	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                          	RoleARN *string
                                                                                                                                                                          
                                                                                                                                                                          	// You can update a delivery stream to enable Amazon S3 backup if it is disabled.
                                                                                                                                                                          	// If backup is enabled, you can't update the delivery stream to disable it.
                                                                                                                                                                          	S3BackupMode RedshiftS3BackupMode
                                                                                                                                                                          
                                                                                                                                                                          	// The Amazon S3 destination for backup.
                                                                                                                                                                          	S3BackupUpdate *S3DestinationUpdate
                                                                                                                                                                          
                                                                                                                                                                          	// The Amazon S3 destination. The compression formats SNAPPY or ZIP cannot be
                                                                                                                                                                          	// specified in RedshiftDestinationUpdate.S3Update because the Amazon Redshift COPY
                                                                                                                                                                          	// operation that reads from the S3 bucket doesn't support these compression
                                                                                                                                                                          	// formats.
                                                                                                                                                                          	S3Update *S3DestinationUpdate
                                                                                                                                                                          
                                                                                                                                                                          	// The name of the user.
                                                                                                                                                                          	Username *string
                                                                                                                                                                          }

                                                                                                                                                                            Describes an update for a destination in Amazon Redshift.

                                                                                                                                                                            type RedshiftRetryOptions

                                                                                                                                                                            type RedshiftRetryOptions struct {
                                                                                                                                                                            
                                                                                                                                                                            	// The length of time during which Kinesis Data Firehose retries delivery after a
                                                                                                                                                                            	// failure, starting from the initial request and including the first attempt. The
                                                                                                                                                                            	// default value is 3600 seconds (60 minutes). Kinesis Data Firehose does not retry
                                                                                                                                                                            	// if the value of DurationInSeconds is 0 (zero) or if the first delivery attempt
                                                                                                                                                                            	// takes longer than the current value.
                                                                                                                                                                            	DurationInSeconds *int32
                                                                                                                                                                            }

                                                                                                                                                                              Configures retry behavior in case Kinesis Data Firehose is unable to deliver documents to Amazon Redshift.

                                                                                                                                                                              type RedshiftS3BackupMode

                                                                                                                                                                              type RedshiftS3BackupMode string
                                                                                                                                                                              const (
                                                                                                                                                                              	RedshiftS3BackupModeDisabled RedshiftS3BackupMode = "Disabled"
                                                                                                                                                                              	RedshiftS3BackupModeEnabled  RedshiftS3BackupMode = "Enabled"
                                                                                                                                                                              )

                                                                                                                                                                                Enum values for RedshiftS3BackupMode

                                                                                                                                                                                func (RedshiftS3BackupMode) Values

                                                                                                                                                                                  Values returns all known values for RedshiftS3BackupMode. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                                                                  type ResourceInUseException

                                                                                                                                                                                  type ResourceInUseException struct {
                                                                                                                                                                                  	Message *string
                                                                                                                                                                                  }

                                                                                                                                                                                    The resource is already in use and not available for this operation.

                                                                                                                                                                                    func (*ResourceInUseException) Error

                                                                                                                                                                                    func (e *ResourceInUseException) Error() string

                                                                                                                                                                                    func (*ResourceInUseException) ErrorCode

                                                                                                                                                                                    func (e *ResourceInUseException) ErrorCode() string

                                                                                                                                                                                    func (*ResourceInUseException) ErrorFault

                                                                                                                                                                                    func (e *ResourceInUseException) ErrorFault() smithy.ErrorFault

                                                                                                                                                                                    func (*ResourceInUseException) ErrorMessage

                                                                                                                                                                                    func (e *ResourceInUseException) ErrorMessage() string

                                                                                                                                                                                    type ResourceNotFoundException

                                                                                                                                                                                    type ResourceNotFoundException struct {
                                                                                                                                                                                    	Message *string
                                                                                                                                                                                    }

                                                                                                                                                                                      The specified resource could not be found.

                                                                                                                                                                                      func (*ResourceNotFoundException) Error

                                                                                                                                                                                      func (e *ResourceNotFoundException) Error() string

                                                                                                                                                                                      func (*ResourceNotFoundException) ErrorCode

                                                                                                                                                                                      func (e *ResourceNotFoundException) ErrorCode() string

                                                                                                                                                                                      func (*ResourceNotFoundException) ErrorFault

                                                                                                                                                                                      func (*ResourceNotFoundException) ErrorMessage

                                                                                                                                                                                      func (e *ResourceNotFoundException) ErrorMessage() string

                                                                                                                                                                                      type S3BackupMode

                                                                                                                                                                                      type S3BackupMode string
                                                                                                                                                                                      const (
                                                                                                                                                                                      	S3BackupModeDisabled S3BackupMode = "Disabled"
                                                                                                                                                                                      	S3BackupModeEnabled  S3BackupMode = "Enabled"
                                                                                                                                                                                      )

                                                                                                                                                                                        Enum values for S3BackupMode

                                                                                                                                                                                        func (S3BackupMode) Values

                                                                                                                                                                                        func (S3BackupMode) Values() []S3BackupMode

                                                                                                                                                                                          Values returns all known values for S3BackupMode. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                                                                          type S3DestinationConfiguration

                                                                                                                                                                                          type S3DestinationConfiguration struct {
                                                                                                                                                                                          
                                                                                                                                                                                          	// The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs)
                                                                                                                                                                                          	// and AWS Service Namespaces
                                                                                                                                                                                          	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                                          	//
                                                                                                                                                                                          	// This member is required.
                                                                                                                                                                                          	BucketARN *string
                                                                                                                                                                                          
                                                                                                                                                                                          	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                                                                                                                                          	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                                                                                                                                          	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                                          	//
                                                                                                                                                                                          	// This member is required.
                                                                                                                                                                                          	RoleARN *string
                                                                                                                                                                                          
                                                                                                                                                                                          	// The buffering option. If no value is specified, BufferingHints object default
                                                                                                                                                                                          	// values are used.
                                                                                                                                                                                          	BufferingHints *BufferingHints
                                                                                                                                                                                          
                                                                                                                                                                                          	// The CloudWatch logging options for your delivery stream.
                                                                                                                                                                                          	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                                          
                                                                                                                                                                                          	// The compression format. If no value is specified, the default is UNCOMPRESSED.
                                                                                                                                                                                          	// The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift
                                                                                                                                                                                          	// destinations because they are not supported by the Amazon Redshift COPY
                                                                                                                                                                                          	// operation that reads from the S3 bucket.
                                                                                                                                                                                          	CompressionFormat CompressionFormat
                                                                                                                                                                                          
                                                                                                                                                                                          	// The encryption configuration. If no value is specified, the default is no
                                                                                                                                                                                          	// encryption.
                                                                                                                                                                                          	EncryptionConfiguration *EncryptionConfiguration
                                                                                                                                                                                          
                                                                                                                                                                                          	// A prefix that Kinesis Data Firehose evaluates and adds to failed records before
                                                                                                                                                                                          	// writing them to S3. This prefix appears immediately following the bucket name.
                                                                                                                                                                                          	// For information about how to specify this prefix, see Custom Prefixes for Amazon
                                                                                                                                                                                          	// S3 Objects (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                                                                                                                                          	ErrorOutputPrefix *string
                                                                                                                                                                                          
                                                                                                                                                                                          	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
                                                                                                                                                                                          	// Amazon S3 files. You can also specify a custom prefix, as described in Custom
                                                                                                                                                                                          	// Prefixes for Amazon S3 Objects
                                                                                                                                                                                          	// (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                                                                                                                                          	Prefix *string
                                                                                                                                                                                          }

                                                                                                                                                                                            Describes the configuration of a destination in Amazon S3.

                                                                                                                                                                                            type S3DestinationDescription

                                                                                                                                                                                            type S3DestinationDescription struct {
                                                                                                                                                                                            
                                                                                                                                                                                            	// The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs)
                                                                                                                                                                                            	// and AWS Service Namespaces
                                                                                                                                                                                            	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                                            	//
                                                                                                                                                                                            	// This member is required.
                                                                                                                                                                                            	BucketARN *string
                                                                                                                                                                                            
                                                                                                                                                                                            	// The buffering option. If no value is specified, BufferingHints object default
                                                                                                                                                                                            	// values are used.
                                                                                                                                                                                            	//
                                                                                                                                                                                            	// This member is required.
                                                                                                                                                                                            	BufferingHints *BufferingHints
                                                                                                                                                                                            
                                                                                                                                                                                            	// The compression format. If no value is specified, the default is UNCOMPRESSED.
                                                                                                                                                                                            	//
                                                                                                                                                                                            	// This member is required.
                                                                                                                                                                                            	CompressionFormat CompressionFormat
                                                                                                                                                                                            
                                                                                                                                                                                            	// The encryption configuration. If no value is specified, the default is no
                                                                                                                                                                                            	// encryption.
                                                                                                                                                                                            	//
                                                                                                                                                                                            	// This member is required.
                                                                                                                                                                                            	EncryptionConfiguration *EncryptionConfiguration
                                                                                                                                                                                            
                                                                                                                                                                                            	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                                                                                                                                            	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                                                                                                                                            	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                                            	//
                                                                                                                                                                                            	// This member is required.
                                                                                                                                                                                            	RoleARN *string
                                                                                                                                                                                            
                                                                                                                                                                                            	// The Amazon CloudWatch logging options for your delivery stream.
                                                                                                                                                                                            	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                                            
                                                                                                                                                                                            	// A prefix that Kinesis Data Firehose evaluates and adds to failed records before
                                                                                                                                                                                            	// writing them to S3. This prefix appears immediately following the bucket name.
                                                                                                                                                                                            	// For information about how to specify this prefix, see Custom Prefixes for Amazon
                                                                                                                                                                                            	// S3 Objects (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                                                                                                                                            	ErrorOutputPrefix *string
                                                                                                                                                                                            
                                                                                                                                                                                            	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
                                                                                                                                                                                            	// Amazon S3 files. You can also specify a custom prefix, as described in Custom
                                                                                                                                                                                            	// Prefixes for Amazon S3 Objects
                                                                                                                                                                                            	// (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                                                                                                                                            	Prefix *string
                                                                                                                                                                                            }

                                                                                                                                                                                              Describes a destination in Amazon S3.

                                                                                                                                                                                              type S3DestinationUpdate

                                                                                                                                                                                              type S3DestinationUpdate struct {
                                                                                                                                                                                              
                                                                                                                                                                                              	// The ARN of the S3 bucket. For more information, see Amazon Resource Names (ARNs)
                                                                                                                                                                                              	// and AWS Service Namespaces
                                                                                                                                                                                              	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                                              	BucketARN *string
                                                                                                                                                                                              
                                                                                                                                                                                              	// The buffering option. If no value is specified, BufferingHints object default
                                                                                                                                                                                              	// values are used.
                                                                                                                                                                                              	BufferingHints *BufferingHints
                                                                                                                                                                                              
                                                                                                                                                                                              	// The CloudWatch logging options for your delivery stream.
                                                                                                                                                                                              	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                                              
                                                                                                                                                                                              	// The compression format. If no value is specified, the default is UNCOMPRESSED.
                                                                                                                                                                                              	// The compression formats SNAPPY or ZIP cannot be specified for Amazon Redshift
                                                                                                                                                                                              	// destinations because they are not supported by the Amazon Redshift COPY
                                                                                                                                                                                              	// operation that reads from the S3 bucket.
                                                                                                                                                                                              	CompressionFormat CompressionFormat
                                                                                                                                                                                              
                                                                                                                                                                                              	// The encryption configuration. If no value is specified, the default is no
                                                                                                                                                                                              	// encryption.
                                                                                                                                                                                              	EncryptionConfiguration *EncryptionConfiguration
                                                                                                                                                                                              
                                                                                                                                                                                              	// A prefix that Kinesis Data Firehose evaluates and adds to failed records before
                                                                                                                                                                                              	// writing them to S3. This prefix appears immediately following the bucket name.
                                                                                                                                                                                              	// For information about how to specify this prefix, see Custom Prefixes for Amazon
                                                                                                                                                                                              	// S3 Objects (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                                                                                                                                              	ErrorOutputPrefix *string
                                                                                                                                                                                              
                                                                                                                                                                                              	// The "YYYY/MM/DD/HH" time format prefix is automatically used for delivered
                                                                                                                                                                                              	// Amazon S3 files. You can also specify a custom prefix, as described in Custom
                                                                                                                                                                                              	// Prefixes for Amazon S3 Objects
                                                                                                                                                                                              	// (https://docs.aws.amazon.com/firehose/latest/dev/s3-prefixes.html).
                                                                                                                                                                                              	Prefix *string
                                                                                                                                                                                              
                                                                                                                                                                                              	// The Amazon Resource Name (ARN) of the AWS credentials. For more information, see
                                                                                                                                                                                              	// Amazon Resource Names (ARNs) and AWS Service Namespaces
                                                                                                                                                                                              	// (https://docs.aws.amazon.com/general/latest/gr/aws-arns-and-namespaces.html).
                                                                                                                                                                                              	RoleARN *string
                                                                                                                                                                                              }

                                                                                                                                                                                                Describes an update for a destination in Amazon S3.

                                                                                                                                                                                                type SchemaConfiguration

                                                                                                                                                                                                type SchemaConfiguration struct {
                                                                                                                                                                                                
                                                                                                                                                                                                	// The ID of the AWS Glue Data Catalog. If you don't supply this, the AWS account
                                                                                                                                                                                                	// ID is used by default.
                                                                                                                                                                                                	CatalogId *string
                                                                                                                                                                                                
                                                                                                                                                                                                	// Specifies the name of the AWS Glue database that contains the schema for the
                                                                                                                                                                                                	// output data.
                                                                                                                                                                                                	DatabaseName *string
                                                                                                                                                                                                
                                                                                                                                                                                                	// If you don't specify an AWS Region, the default is the current Region.
                                                                                                                                                                                                	Region *string
                                                                                                                                                                                                
                                                                                                                                                                                                	// The role that Kinesis Data Firehose can use to access AWS Glue. This role must
                                                                                                                                                                                                	// be in the same account you use for Kinesis Data Firehose. Cross-account roles
                                                                                                                                                                                                	// aren't allowed.
                                                                                                                                                                                                	RoleARN *string
                                                                                                                                                                                                
                                                                                                                                                                                                	// Specifies the AWS Glue table that contains the column information that
                                                                                                                                                                                                	// constitutes your data schema.
                                                                                                                                                                                                	TableName *string
                                                                                                                                                                                                
                                                                                                                                                                                                	// Specifies the table version for the output data schema. If you don't specify
                                                                                                                                                                                                	// this version ID, or if you set it to LATEST, Kinesis Data Firehose uses the most
                                                                                                                                                                                                	// recent version. This means that any updates to the table are automatically
                                                                                                                                                                                                	// picked up.
                                                                                                                                                                                                	VersionId *string
                                                                                                                                                                                                }

                                                                                                                                                                                                  Specifies the schema to which you want Kinesis Data Firehose to configure your data before it writes it to Amazon S3. This parameter is required if Enabled is set to true.

                                                                                                                                                                                                  type Serializer

                                                                                                                                                                                                  type Serializer struct {
                                                                                                                                                                                                  
                                                                                                                                                                                                  	// A serializer to use for converting data to the ORC format before storing it in
                                                                                                                                                                                                  	// Amazon S3. For more information, see Apache ORC (https://orc.apache.org/docs/).
                                                                                                                                                                                                  	OrcSerDe *OrcSerDe
                                                                                                                                                                                                  
                                                                                                                                                                                                  	// A serializer to use for converting data to the Parquet format before storing it
                                                                                                                                                                                                  	// in Amazon S3. For more information, see Apache Parquet
                                                                                                                                                                                                  	// (https://parquet.apache.org/documentation/latest/).
                                                                                                                                                                                                  	ParquetSerDe *ParquetSerDe
                                                                                                                                                                                                  }

                                                                                                                                                                                                    The serializer that you want Kinesis Data Firehose to use to convert data to the target format before writing it to Amazon S3. Kinesis Data Firehose supports two types of serializers: the ORC SerDe (https://hive.apache.org/javadocs/r1.2.2/api/org/apache/hadoop/hive/ql/io/orc/OrcSerde.html) and the Parquet SerDe (https://hive.apache.org/javadocs/r1.2.2/api/org/apache/hadoop/hive/ql/io/parquet/serde/ParquetHiveSerDe.html).

                                                                                                                                                                                                    type ServiceUnavailableException

                                                                                                                                                                                                    type ServiceUnavailableException struct {
                                                                                                                                                                                                    	Message *string
                                                                                                                                                                                                    }

                                                                                                                                                                                                      The service is unavailable. Back off and retry the operation. If you continue to see the exception, throughput limits for the delivery stream may have been exceeded. For more information about limits and how to request an increase, see Amazon Kinesis Data Firehose Limits (https://docs.aws.amazon.com/firehose/latest/dev/limits.html).

                                                                                                                                                                                                      func (*ServiceUnavailableException) Error

                                                                                                                                                                                                      func (*ServiceUnavailableException) ErrorCode

                                                                                                                                                                                                      func (e *ServiceUnavailableException) ErrorCode() string

                                                                                                                                                                                                      func (*ServiceUnavailableException) ErrorFault

                                                                                                                                                                                                      func (*ServiceUnavailableException) ErrorMessage

                                                                                                                                                                                                      func (e *ServiceUnavailableException) ErrorMessage() string

                                                                                                                                                                                                      type SourceDescription

                                                                                                                                                                                                      type SourceDescription struct {
                                                                                                                                                                                                      
                                                                                                                                                                                                      	// The KinesisStreamSourceDescription value for the source Kinesis data stream.
                                                                                                                                                                                                      	KinesisStreamSourceDescription *KinesisStreamSourceDescription
                                                                                                                                                                                                      }

                                                                                                                                                                                                        Details about a Kinesis data stream used as the source for a Kinesis Data Firehose delivery stream.

                                                                                                                                                                                                        type SplunkDestinationConfiguration

                                                                                                                                                                                                        type SplunkDestinationConfiguration struct {
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends
                                                                                                                                                                                                        	// your data.
                                                                                                                                                                                                        	//
                                                                                                                                                                                                        	// This member is required.
                                                                                                                                                                                                        	HECEndpoint *string
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// This type can be either "Raw" or "Event."
                                                                                                                                                                                                        	//
                                                                                                                                                                                                        	// This member is required.
                                                                                                                                                                                                        	HECEndpointType HECEndpointType
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// This is a GUID that you obtain from your Splunk cluster when you create a new
                                                                                                                                                                                                        	// HEC endpoint.
                                                                                                                                                                                                        	//
                                                                                                                                                                                                        	// This member is required.
                                                                                                                                                                                                        	HECToken *string
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// The configuration for the backup Amazon S3 location.
                                                                                                                                                                                                        	//
                                                                                                                                                                                                        	// This member is required.
                                                                                                                                                                                                        	S3Configuration *S3DestinationConfiguration
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// The Amazon CloudWatch logging options for your delivery stream.
                                                                                                                                                                                                        	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// The amount of time that Kinesis Data Firehose waits to receive an acknowledgment
                                                                                                                                                                                                        	// from Splunk after it sends it data. At the end of the timeout period, Kinesis
                                                                                                                                                                                                        	// Data Firehose either tries to send the data again or considers it an error,
                                                                                                                                                                                                        	// based on your retry settings.
                                                                                                                                                                                                        	HECAcknowledgmentTimeoutInSeconds *int32
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// The data processing configuration.
                                                                                                                                                                                                        	ProcessingConfiguration *ProcessingConfiguration
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// The retry behavior in case Kinesis Data Firehose is unable to deliver data to
                                                                                                                                                                                                        	// Splunk, or if it doesn't receive an acknowledgment of receipt from Splunk.
                                                                                                                                                                                                        	RetryOptions *SplunkRetryOptions
                                                                                                                                                                                                        
                                                                                                                                                                                                        	// Defines how documents should be delivered to Amazon S3. When set to
                                                                                                                                                                                                        	// FailedEventsOnly, Kinesis Data Firehose writes any data that could not be
                                                                                                                                                                                                        	// indexed to the configured Amazon S3 destination. When set to AllEvents, Kinesis
                                                                                                                                                                                                        	// Data Firehose delivers all incoming records to Amazon S3, and also writes failed
                                                                                                                                                                                                        	// documents to Amazon S3. The default value is FailedEventsOnly. You can update
                                                                                                                                                                                                        	// this backup mode from FailedEventsOnly to AllEvents. You can't update it from
                                                                                                                                                                                                        	// AllEvents to FailedEventsOnly.
                                                                                                                                                                                                        	S3BackupMode SplunkS3BackupMode
                                                                                                                                                                                                        }

                                                                                                                                                                                                          Describes the configuration of a destination in Splunk.

                                                                                                                                                                                                          type SplunkDestinationDescription

                                                                                                                                                                                                          type SplunkDestinationDescription struct {
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// The Amazon CloudWatch logging options for your delivery stream.
                                                                                                                                                                                                          	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// The amount of time that Kinesis Data Firehose waits to receive an acknowledgment
                                                                                                                                                                                                          	// from Splunk after it sends it data. At the end of the timeout period, Kinesis
                                                                                                                                                                                                          	// Data Firehose either tries to send the data again or considers it an error,
                                                                                                                                                                                                          	// based on your retry settings.
                                                                                                                                                                                                          	HECAcknowledgmentTimeoutInSeconds *int32
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends
                                                                                                                                                                                                          	// your data.
                                                                                                                                                                                                          	HECEndpoint *string
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// This type can be either "Raw" or "Event."
                                                                                                                                                                                                          	HECEndpointType HECEndpointType
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// A GUID you obtain from your Splunk cluster when you create a new HEC endpoint.
                                                                                                                                                                                                          	HECToken *string
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// The data processing configuration.
                                                                                                                                                                                                          	ProcessingConfiguration *ProcessingConfiguration
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// The retry behavior in case Kinesis Data Firehose is unable to deliver data to
                                                                                                                                                                                                          	// Splunk or if it doesn't receive an acknowledgment of receipt from Splunk.
                                                                                                                                                                                                          	RetryOptions *SplunkRetryOptions
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// Defines how documents should be delivered to Amazon S3. When set to
                                                                                                                                                                                                          	// FailedDocumentsOnly, Kinesis Data Firehose writes any data that could not be
                                                                                                                                                                                                          	// indexed to the configured Amazon S3 destination. When set to AllDocuments,
                                                                                                                                                                                                          	// Kinesis Data Firehose delivers all incoming records to Amazon S3, and also
                                                                                                                                                                                                          	// writes failed documents to Amazon S3. Default value is FailedDocumentsOnly.
                                                                                                                                                                                                          	S3BackupMode SplunkS3BackupMode
                                                                                                                                                                                                          
                                                                                                                                                                                                          	// The Amazon S3 destination.>
                                                                                                                                                                                                          	S3DestinationDescription *S3DestinationDescription
                                                                                                                                                                                                          }

                                                                                                                                                                                                            Describes a destination in Splunk.

                                                                                                                                                                                                            type SplunkDestinationUpdate

                                                                                                                                                                                                            type SplunkDestinationUpdate struct {
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// The Amazon CloudWatch logging options for your delivery stream.
                                                                                                                                                                                                            	CloudWatchLoggingOptions *CloudWatchLoggingOptions
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// The amount of time that Kinesis Data Firehose waits to receive an acknowledgment
                                                                                                                                                                                                            	// from Splunk after it sends data. At the end of the timeout period, Kinesis Data
                                                                                                                                                                                                            	// Firehose either tries to send the data again or considers it an error, based on
                                                                                                                                                                                                            	// your retry settings.
                                                                                                                                                                                                            	HECAcknowledgmentTimeoutInSeconds *int32
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// The HTTP Event Collector (HEC) endpoint to which Kinesis Data Firehose sends
                                                                                                                                                                                                            	// your data.
                                                                                                                                                                                                            	HECEndpoint *string
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// This type can be either "Raw" or "Event."
                                                                                                                                                                                                            	HECEndpointType HECEndpointType
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// A GUID that you obtain from your Splunk cluster when you create a new HEC
                                                                                                                                                                                                            	// endpoint.
                                                                                                                                                                                                            	HECToken *string
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// The data processing configuration.
                                                                                                                                                                                                            	ProcessingConfiguration *ProcessingConfiguration
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// The retry behavior in case Kinesis Data Firehose is unable to deliver data to
                                                                                                                                                                                                            	// Splunk or if it doesn't receive an acknowledgment of receipt from Splunk.
                                                                                                                                                                                                            	RetryOptions *SplunkRetryOptions
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// Specifies how you want Kinesis Data Firehose to back up documents to Amazon S3.
                                                                                                                                                                                                            	// When set to FailedDocumentsOnly, Kinesis Data Firehose writes any data that
                                                                                                                                                                                                            	// could not be indexed to the configured Amazon S3 destination. When set to
                                                                                                                                                                                                            	// AllEvents, Kinesis Data Firehose delivers all incoming records to Amazon S3, and
                                                                                                                                                                                                            	// also writes failed documents to Amazon S3. The default value is
                                                                                                                                                                                                            	// FailedEventsOnly. You can update this backup mode from FailedEventsOnly to
                                                                                                                                                                                                            	// AllEvents. You can't update it from AllEvents to FailedEventsOnly.
                                                                                                                                                                                                            	S3BackupMode SplunkS3BackupMode
                                                                                                                                                                                                            
                                                                                                                                                                                                            	// Your update to the configuration of the backup Amazon S3 location.
                                                                                                                                                                                                            	S3Update *S3DestinationUpdate
                                                                                                                                                                                                            }

                                                                                                                                                                                                              Describes an update for a destination in Splunk.

                                                                                                                                                                                                              type SplunkRetryOptions

                                                                                                                                                                                                              type SplunkRetryOptions struct {
                                                                                                                                                                                                              
                                                                                                                                                                                                              	// The total amount of time that Kinesis Data Firehose spends on retries. This
                                                                                                                                                                                                              	// duration starts after the initial attempt to send data to Splunk fails. It
                                                                                                                                                                                                              	// doesn't include the periods during which Kinesis Data Firehose waits for
                                                                                                                                                                                                              	// acknowledgment from Splunk after each attempt.
                                                                                                                                                                                                              	DurationInSeconds *int32
                                                                                                                                                                                                              }

                                                                                                                                                                                                                Configures retry behavior in case Kinesis Data Firehose is unable to deliver documents to Splunk, or if it doesn't receive an acknowledgment from Splunk.

                                                                                                                                                                                                                type SplunkS3BackupMode

                                                                                                                                                                                                                type SplunkS3BackupMode string
                                                                                                                                                                                                                const (
                                                                                                                                                                                                                	SplunkS3BackupModeFailedEventsOnly SplunkS3BackupMode = "FailedEventsOnly"
                                                                                                                                                                                                                	SplunkS3BackupModeAllEvents        SplunkS3BackupMode = "AllEvents"
                                                                                                                                                                                                                )

                                                                                                                                                                                                                  Enum values for SplunkS3BackupMode

                                                                                                                                                                                                                  func (SplunkS3BackupMode) Values

                                                                                                                                                                                                                    Values returns all known values for SplunkS3BackupMode. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                                                                                                    type Tag

                                                                                                                                                                                                                    type Tag struct {
                                                                                                                                                                                                                    
                                                                                                                                                                                                                    	// A unique identifier for the tag. Maximum length: 128 characters. Valid
                                                                                                                                                                                                                    	// characters: Unicode letters, digits, white space, _ . / = + - % @
                                                                                                                                                                                                                    	//
                                                                                                                                                                                                                    	// This member is required.
                                                                                                                                                                                                                    	Key *string
                                                                                                                                                                                                                    
                                                                                                                                                                                                                    	// An optional string, which you can use to describe or define the tag. Maximum
                                                                                                                                                                                                                    	// length: 256 characters. Valid characters: Unicode letters, digits, white space,
                                                                                                                                                                                                                    	// _ . / = + - % @
                                                                                                                                                                                                                    	Value *string
                                                                                                                                                                                                                    }

                                                                                                                                                                                                                      Metadata that you can assign to a delivery stream, consisting of a key-value pair.

                                                                                                                                                                                                                      type VpcConfiguration

                                                                                                                                                                                                                      type VpcConfiguration struct {
                                                                                                                                                                                                                      
                                                                                                                                                                                                                      	// The ARN of the IAM role that you want the delivery stream to use to create
                                                                                                                                                                                                                      	// endpoints in the destination VPC. You can use your existing Kinesis Data
                                                                                                                                                                                                                      	// Firehose delivery role or you can specify a new role. In either case, make sure
                                                                                                                                                                                                                      	// that the role trusts the Kinesis Data Firehose service principal and that it
                                                                                                                                                                                                                      	// grants the following permissions:
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// * ec2:DescribeVpcs
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// *
                                                                                                                                                                                                                      	// ec2:DescribeVpcAttribute
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// * ec2:DescribeSubnets
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// * ec2:DescribeSecurityGroups
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// *
                                                                                                                                                                                                                      	// ec2:DescribeNetworkInterfaces
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// * ec2:CreateNetworkInterface
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// *
                                                                                                                                                                                                                      	// ec2:CreateNetworkInterfacePermission
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// * ec2:DeleteNetworkInterface
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// If you
                                                                                                                                                                                                                      	// revoke these permissions after you create the delivery stream, Kinesis Data
                                                                                                                                                                                                                      	// Firehose can't scale out by creating more ENIs when necessary. You might
                                                                                                                                                                                                                      	// therefore see a degradation in performance.
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// This member is required.
                                                                                                                                                                                                                      	RoleARN *string
                                                                                                                                                                                                                      
                                                                                                                                                                                                                      	// The IDs of the security groups that you want Kinesis Data Firehose to use when
                                                                                                                                                                                                                      	// it creates ENIs in the VPC of the Amazon ES destination. You can use the same
                                                                                                                                                                                                                      	// security group that the Amazon ES domain uses or different ones. If you specify
                                                                                                                                                                                                                      	// different security groups here, ensure that they allow outbound HTTPS traffic to
                                                                                                                                                                                                                      	// the Amazon ES domain's security group. Also ensure that the Amazon ES domain's
                                                                                                                                                                                                                      	// security group allows HTTPS traffic from the security groups specified here. If
                                                                                                                                                                                                                      	// you use the same security group for both your delivery stream and the Amazon ES
                                                                                                                                                                                                                      	// domain, make sure the security group inbound rule allows HTTPS traffic. For more
                                                                                                                                                                                                                      	// information about security group rules, see Security group rules
                                                                                                                                                                                                                      	// (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_SecurityGroups.html#SecurityGroupRules)
                                                                                                                                                                                                                      	// in the Amazon VPC documentation.
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// This member is required.
                                                                                                                                                                                                                      	SecurityGroupIds []string
                                                                                                                                                                                                                      
                                                                                                                                                                                                                      	// The IDs of the subnets that you want Kinesis Data Firehose to use to create ENIs
                                                                                                                                                                                                                      	// in the VPC of the Amazon ES destination. Make sure that the routing tables and
                                                                                                                                                                                                                      	// inbound and outbound rules allow traffic to flow from the subnets whose IDs are
                                                                                                                                                                                                                      	// specified here to the subnets that have the destination Amazon ES endpoints.
                                                                                                                                                                                                                      	// Kinesis Data Firehose creates at least one ENI in each of the subnets that are
                                                                                                                                                                                                                      	// specified here. Do not delete or modify these ENIs. The number of ENIs that
                                                                                                                                                                                                                      	// Kinesis Data Firehose creates in the subnets specified here scales up and down
                                                                                                                                                                                                                      	// automatically based on throughput. To enable Kinesis Data Firehose to scale up
                                                                                                                                                                                                                      	// the number of ENIs to match throughput, ensure that you have sufficient quota.
                                                                                                                                                                                                                      	// To help you calculate the quota you need, assume that Kinesis Data Firehose can
                                                                                                                                                                                                                      	// create up to three ENIs for this delivery stream for each of the subnets
                                                                                                                                                                                                                      	// specified here. For more information about ENI quota, see Network Interfaces
                                                                                                                                                                                                                      	// (https://docs.aws.amazon.com/vpc/latest/userguide/amazon-vpc-limits.html#vpc-limits-enis)
                                                                                                                                                                                                                      	// in the Amazon VPC Quotas topic.
                                                                                                                                                                                                                      	//
                                                                                                                                                                                                                      	// This member is required.
                                                                                                                                                                                                                      	SubnetIds []string
                                                                                                                                                                                                                      }

                                                                                                                                                                                                                        The details of the VPC of the Amazon ES destination.

                                                                                                                                                                                                                        type VpcConfigurationDescription

                                                                                                                                                                                                                        type VpcConfigurationDescription struct {
                                                                                                                                                                                                                        
                                                                                                                                                                                                                        	// The ARN of the IAM role that the delivery stream uses to create endpoints in the
                                                                                                                                                                                                                        	// destination VPC. You can use your existing Kinesis Data Firehose delivery role
                                                                                                                                                                                                                        	// or you can specify a new role. In either case, make sure that the role trusts
                                                                                                                                                                                                                        	// the Kinesis Data Firehose service principal and that it grants the following
                                                                                                                                                                                                                        	// permissions:
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// * ec2:DescribeVpcs
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// * ec2:DescribeVpcAttribute
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// *
                                                                                                                                                                                                                        	// ec2:DescribeSubnets
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// * ec2:DescribeSecurityGroups
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// *
                                                                                                                                                                                                                        	// ec2:DescribeNetworkInterfaces
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// * ec2:CreateNetworkInterface
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// *
                                                                                                                                                                                                                        	// ec2:CreateNetworkInterfacePermission
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// * ec2:DeleteNetworkInterface
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// If you
                                                                                                                                                                                                                        	// revoke these permissions after you create the delivery stream, Kinesis Data
                                                                                                                                                                                                                        	// Firehose can't scale out by creating more ENIs when necessary. You might
                                                                                                                                                                                                                        	// therefore see a degradation in performance.
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// This member is required.
                                                                                                                                                                                                                        	RoleARN *string
                                                                                                                                                                                                                        
                                                                                                                                                                                                                        	// The IDs of the security groups that Kinesis Data Firehose uses when it creates
                                                                                                                                                                                                                        	// ENIs in the VPC of the Amazon ES destination. You can use the same security
                                                                                                                                                                                                                        	// group that the Amazon ES domain uses or different ones. If you specify different
                                                                                                                                                                                                                        	// security groups, ensure that they allow outbound HTTPS traffic to the Amazon ES
                                                                                                                                                                                                                        	// domain's security group. Also ensure that the Amazon ES domain's security group
                                                                                                                                                                                                                        	// allows HTTPS traffic from the security groups specified here. If you use the
                                                                                                                                                                                                                        	// same security group for both your delivery stream and the Amazon ES domain, make
                                                                                                                                                                                                                        	// sure the security group inbound rule allows HTTPS traffic. For more information
                                                                                                                                                                                                                        	// about security group rules, see Security group rules
                                                                                                                                                                                                                        	// (https://docs.aws.amazon.com/vpc/latest/userguide/VPC_SecurityGroups.html#SecurityGroupRules)
                                                                                                                                                                                                                        	// in the Amazon VPC documentation.
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// This member is required.
                                                                                                                                                                                                                        	SecurityGroupIds []string
                                                                                                                                                                                                                        
                                                                                                                                                                                                                        	// The IDs of the subnets that Kinesis Data Firehose uses to create ENIs in the VPC
                                                                                                                                                                                                                        	// of the Amazon ES destination. Make sure that the routing tables and inbound and
                                                                                                                                                                                                                        	// outbound rules allow traffic to flow from the subnets whose IDs are specified
                                                                                                                                                                                                                        	// here to the subnets that have the destination Amazon ES endpoints. Kinesis Data
                                                                                                                                                                                                                        	// Firehose creates at least one ENI in each of the subnets that are specified
                                                                                                                                                                                                                        	// here. Do not delete or modify these ENIs. The number of ENIs that Kinesis Data
                                                                                                                                                                                                                        	// Firehose creates in the subnets specified here scales up and down automatically
                                                                                                                                                                                                                        	// based on throughput. To enable Kinesis Data Firehose to scale up the number of
                                                                                                                                                                                                                        	// ENIs to match throughput, ensure that you have sufficient quota. To help you
                                                                                                                                                                                                                        	// calculate the quota you need, assume that Kinesis Data Firehose can create up to
                                                                                                                                                                                                                        	// three ENIs for this delivery stream for each of the subnets specified here. For
                                                                                                                                                                                                                        	// more information about ENI quota, see Network Interfaces
                                                                                                                                                                                                                        	// (https://docs.aws.amazon.com/vpc/latest/userguide/amazon-vpc-limits.html#vpc-limits-enis)
                                                                                                                                                                                                                        	// in the Amazon VPC Quotas topic.
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// This member is required.
                                                                                                                                                                                                                        	SubnetIds []string
                                                                                                                                                                                                                        
                                                                                                                                                                                                                        	// The ID of the Amazon ES destination's VPC.
                                                                                                                                                                                                                        	//
                                                                                                                                                                                                                        	// This member is required.
                                                                                                                                                                                                                        	VpcId *string
                                                                                                                                                                                                                        }

                                                                                                                                                                                                                          The details of the VPC of the Amazon ES destination.