Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type AccessDeniedException

type AccessDeniedException struct {
	Message *string
}

    You do not have sufficient access to perform this action. Check that the workbook is owned by you and your IAM policy allows access to the resource in the request.

    func (*AccessDeniedException) Error

    func (e *AccessDeniedException) Error() string

    func (*AccessDeniedException) ErrorCode

    func (e *AccessDeniedException) ErrorCode() string

    func (*AccessDeniedException) ErrorFault

    func (e *AccessDeniedException) ErrorFault() smithy.ErrorFault

    func (*AccessDeniedException) ErrorMessage

    func (e *AccessDeniedException) ErrorMessage() string

    type AutomationExecutionException

    type AutomationExecutionException struct {
    	Message *string
    }

      The automation execution did not end successfully.

      func (*AutomationExecutionException) Error

      func (*AutomationExecutionException) ErrorCode

      func (e *AutomationExecutionException) ErrorCode() string

      func (*AutomationExecutionException) ErrorFault

      func (*AutomationExecutionException) ErrorMessage

      func (e *AutomationExecutionException) ErrorMessage() string

      type AutomationExecutionTimeoutException

      type AutomationExecutionTimeoutException struct {
      	Message *string
      }

        The automation execution timed out.

        func (*AutomationExecutionTimeoutException) Error

        func (*AutomationExecutionTimeoutException) ErrorCode

        func (*AutomationExecutionTimeoutException) ErrorFault

        func (*AutomationExecutionTimeoutException) ErrorMessage

        func (e *AutomationExecutionTimeoutException) ErrorMessage() string

        type Cell

        type Cell struct {
        
        	// The format of the cell. If this field is empty, then the format is either not
        	// specified in the workbook or the format is set to AUTO.
        	Format Format
        
        	// The formatted value of the cell. This is the value that you see displayed in the
        	// cell in the UI. Note that the formatted value of a cell is always represented as
        	// a string irrespective of the data that is stored in the cell. For example, if a
        	// cell contains a date, the formatted value of the cell is the string
        	// representation of the formatted date being shown in the cell in the UI. See
        	// details in the rawValue field below for how cells of different formats will have
        	// different raw and formatted values.
        	FormattedValue *string
        
        	// The formula contained in the cell. This field is empty if a cell does not have a
        	// formula.
        	Formula *string
        
        	// The raw value of the data contained in the cell. The raw value depends on the
        	// format of the data in the cell. However the attribute in the API return value is
        	// always a string containing the raw value. Cells with format DATE, DATE_TIME or
        	// TIME have the raw value as a floating point number where the whole number
        	// represents the number of days since 1/1/1900 and the fractional part represents
        	// the fraction of the day since midnight. For example, a cell with date 11/3/2020
        	// has the raw value "44138". A cell with the time 9:00 AM has the raw value
        	// "0.375" and a cell with date/time value of 11/3/2020 9:00 AM has the raw value
        	// "44138.375". Notice that even though the raw value is a number in all three
        	// cases, it is still represented as a string. Cells with format NUMBER, CURRENCY,
        	// PERCENTAGE and ACCOUNTING have the raw value of the data as the number
        	// representing the data being displayed. For example, the number 1.325 with two
        	// decimal places in the format will have it's raw value as "1.325" and formatted
        	// value as "1.33". A currency value for $10 will have the raw value as "10" and
        	// formatted value as "$10.00". A value representing 20% with two decimal places in
        	// the format will have its raw value as "0.2" and the formatted value as "20.00%".
        	// An accounting value of -$25 will have "-25" as the raw value and "$ (25.00)" as
        	// the formatted value. Cells with format TEXT will have the raw text as the raw
        	// value. For example, a cell with text "John Smith" will have "John Smith" as both
        	// the raw value and the formatted value. Cells with format CONTACT will have the
        	// name of the contact as a formatted value and the email address of the contact as
        	// the raw value. For example, a contact for John Smith will have "John Smith" as
        	// the formatted value and "john.smith@example.com" as the raw value. Cells with
        	// format ROWLINK (aka picklist) will have the first column of the linked row as
        	// the formatted value and the row id of the linked row as the raw value. For
        	// example, a cell containing a picklist to a table that displays task status might
        	// have "Completed" as the formatted value and
        	// "row:dfcefaee-5b37-4355-8f28-40c3e4ff5dd4/ca432b2f-b8eb-431d-9fb5-cbe0342f9f03"
        	// as the raw value. Cells with format AUTO or cells without any format that are
        	// auto-detected as one of the formats above will contain the raw and formatted
        	// values as mentioned above, based on the auto-detected formats. If there is no
        	// auto-detected format, the raw and formatted values will be the same as the data
        	// in the cell.
        	RawValue *string
        }

          An object that represents a single cell in a table.

          type CellInput

          type CellInput struct {
          
          	// Fact represents the data that is entered into a cell. This data can be free text
          	// or a formula. Formulas need to start with the equals (=) sign.
          	Fact *string
          }

            CellInput object contains the data needed to create or update cells in a table.

            type ColumnMetadata

            type ColumnMetadata struct {
            
            	// The format of the column.
            	//
            	// This member is required.
            	Format Format
            
            	// The name of the column.
            	//
            	// This member is required.
            	Name *string
            }

              Metadata for column in the table.

              type CreateRowData

              type CreateRowData struct {
              
              	// An external identifier that represents the single row that is being created as
              	// part of the BatchCreateTableRows request. This can be any string that you can
              	// use to identify the row in the request. The BatchCreateTableRows API puts the
              	// batch item id in the results to allow you to link data in the request to data in
              	// the results.
              	//
              	// This member is required.
              	BatchItemId *string
              
              	// A map representing the cells to create in the new row. The key is the column id
              	// of the cell and the value is the CellInput object that represents the data to
              	// set in that cell.
              	//
              	// This member is required.
              	CellsToCreate map[string]CellInput
              }

                Data needed to create a single row in a table as part of the BatchCreateTableRows request.

                type DataItem

                type DataItem struct {
                
                	// The formatted value of the data. e.g. John Smith.
                	FormattedValue *string
                
                	// The overrideFormat is optional and is specified only if a particular row of data
                	// has a different format for the data than the default format defined on the
                	// screen or the table.
                	OverrideFormat Format
                
                	// The raw value of the data. e.g. jsmith@example.com
                	RawValue *string
                }

                  The data in a particular data cell defined on the screen.

                  type DelimitedTextImportOptions

                  type DelimitedTextImportOptions struct {
                  
                  	// The delimiter to use for separating columns in a single row of the input.
                  	//
                  	// This member is required.
                  	Delimiter *string
                  
                  	// The encoding of the data in the input file.
                  	DataCharacterEncoding ImportDataCharacterEncoding
                  
                  	// Indicates whether the input file has a header row at the top containing the
                  	// column names.
                  	HasHeaderRow bool
                  
                  	// A parameter to indicate whether empty rows should be ignored or be included in
                  	// the import.
                  	IgnoreEmptyRows bool
                  }

                    An object that contains the options relating to parsing delimited text as part of an import request.

                    type DestinationOptions

                    type DestinationOptions struct {
                    
                    	// A map of the column id to the import properties for each column.
                    	ColumnMap map[string]SourceDataColumnProperties
                    }

                      An object that contains the options relating to the destination of the import request.

                      type FailedBatchItem

                      type FailedBatchItem struct {
                      
                      	// The error message that indicates why the batch item failed.
                      	//
                      	// This member is required.
                      	ErrorMessage *string
                      
                      	// The id of the batch item that failed. This is the batch item id for the
                      	// BatchCreateTableRows and BatchUpsertTableRows operations and the row id for the
                      	// BatchUpdateTableRows and BatchDeleteTableRows operations.
                      	//
                      	// This member is required.
                      	Id *string
                      }

                        A single item in a batch that failed to perform the intended action because of an error preventing it from succeeding.

                        type Filter

                        type Filter struct {
                        
                        	// A formula representing a filter function that returns zero or more matching rows
                        	// from a table. Valid formulas in this field return a list of rows from a table.
                        	// The most common ways of writing a formula to return a list of rows are to use
                        	// the FindRow() or Filter() functions. Any other formula that returns zero or more
                        	// rows is also acceptable. For example, you can use a formula that points to a
                        	// cell that contains a filter function.
                        	//
                        	// This member is required.
                        	Formula *string
                        
                        	// The optional contextRowId attribute can be used to specify the row id of the
                        	// context row if the filter formula contains unqualified references to table
                        	// columns and needs a context row to evaluate them successfully.
                        	ContextRowId *string
                        }

                          An object that represents a filter formula along with the id of the context row under which the filter function needs to evaluate.

                          type Format

                          type Format string
                          const (
                          	FormatAuto       Format = "AUTO"
                          	FormatNumber     Format = "NUMBER"
                          	FormatCurrency   Format = "CURRENCY"
                          	FormatDate       Format = "DATE"
                          	FormatTime       Format = "TIME"
                          	FormatDateTime   Format = "DATE_TIME"
                          	FormatPercentage Format = "PERCENTAGE"
                          	FormatText       Format = "TEXT"
                          	FormatAccounting Format = "ACCOUNTING"
                          	FormatContact    Format = "CONTACT"
                          	FormatRowlink    Format = "ROWLINK"
                          )

                            Enum values for Format

                            func (Format) Values

                            func (Format) Values() []Format

                              Values returns all known values for Format. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                              type ImportDataCharacterEncoding

                              type ImportDataCharacterEncoding string
                              const (
                              	ImportDataCharacterEncodingUtf8     ImportDataCharacterEncoding = "UTF-8"
                              	ImportDataCharacterEncodingUsAscii  ImportDataCharacterEncoding = "US-ASCII"
                              	ImportDataCharacterEncodingIso88591 ImportDataCharacterEncoding = "ISO-8859-1"
                              	ImportDataCharacterEncodingUtf16be  ImportDataCharacterEncoding = "UTF-16BE"
                              	ImportDataCharacterEncodingUtf16le  ImportDataCharacterEncoding = "UTF-16LE"
                              	ImportDataCharacterEncodingUtf16    ImportDataCharacterEncoding = "UTF-16"
                              )

                                Enum values for ImportDataCharacterEncoding

                                func (ImportDataCharacterEncoding) Values

                                  Values returns all known values for ImportDataCharacterEncoding. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                  type ImportDataSource

                                  type ImportDataSource struct {
                                  
                                  	// The configuration parameters for the data source of the import
                                  	//
                                  	// This member is required.
                                  	DataSourceConfig *ImportDataSourceConfig
                                  }

                                    An object that has details about the source of the data that was submitted for import.

                                    type ImportDataSourceConfig

                                    type ImportDataSourceConfig struct {
                                    
                                    	// The URL from which source data will be downloaded for the import request.
                                    	DataSourceUrl *string
                                    }

                                      An object that contains the configuration parameters for the data source of an import request.

                                      type ImportJobSubmitter

                                      type ImportJobSubmitter struct {
                                      
                                      	// The email id of the submitter of the import job, if available.
                                      	Email *string
                                      
                                      	// The AWS user ARN of the submitter of the import job, if available.
                                      	UserArn *string
                                      }

                                        An object that contains the attributes of the submitter of the import job.

                                        type ImportOptions

                                        type ImportOptions struct {
                                        
                                        	// Options relating to parsing delimited text. Required if dataFormat is
                                        	// DELIMITED_TEXT.
                                        	DelimitedTextOptions *DelimitedTextImportOptions
                                        
                                        	// Options relating to the destination of the import request.
                                        	DestinationOptions *DestinationOptions
                                        }

                                          An object that contains the options specified by the sumitter of the import request.

                                          type ImportSourceDataFormat

                                          type ImportSourceDataFormat string
                                          const (
                                          	ImportSourceDataFormatDelimitedText ImportSourceDataFormat = "DELIMITED_TEXT"
                                          )

                                            Enum values for ImportSourceDataFormat

                                            func (ImportSourceDataFormat) Values

                                              Values returns all known values for ImportSourceDataFormat. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                              type InternalServerException

                                              type InternalServerException struct {
                                              	Message *string
                                              }

                                                There were unexpected errors from the server.

                                                func (*InternalServerException) Error

                                                func (e *InternalServerException) Error() string

                                                func (*InternalServerException) ErrorCode

                                                func (e *InternalServerException) ErrorCode() string

                                                func (*InternalServerException) ErrorFault

                                                func (e *InternalServerException) ErrorFault() smithy.ErrorFault

                                                func (*InternalServerException) ErrorMessage

                                                func (e *InternalServerException) ErrorMessage() string

                                                type RequestTimeoutException

                                                type RequestTimeoutException struct {
                                                	Message *string
                                                }

                                                  The request timed out.

                                                  func (*RequestTimeoutException) Error

                                                  func (e *RequestTimeoutException) Error() string

                                                  func (*RequestTimeoutException) ErrorCode

                                                  func (e *RequestTimeoutException) ErrorCode() string

                                                  func (*RequestTimeoutException) ErrorFault

                                                  func (e *RequestTimeoutException) ErrorFault() smithy.ErrorFault

                                                  func (*RequestTimeoutException) ErrorMessage

                                                  func (e *RequestTimeoutException) ErrorMessage() string

                                                  type ResourceNotFoundException

                                                  type ResourceNotFoundException struct {
                                                  	Message *string
                                                  }

                                                    A Workbook, Table, App, Screen or Screen Automation was not found with the given ID.

                                                    func (*ResourceNotFoundException) Error

                                                    func (e *ResourceNotFoundException) Error() string

                                                    func (*ResourceNotFoundException) ErrorCode

                                                    func (e *ResourceNotFoundException) ErrorCode() string

                                                    func (*ResourceNotFoundException) ErrorFault

                                                    func (*ResourceNotFoundException) ErrorMessage

                                                    func (e *ResourceNotFoundException) ErrorMessage() string

                                                    type ResultRow

                                                    type ResultRow struct {
                                                    
                                                    	// List of all the data cells in a row.
                                                    	//
                                                    	// This member is required.
                                                    	DataItems []DataItem
                                                    
                                                    	// The ID for a particular row.
                                                    	RowId *string
                                                    }

                                                      A single row in the ResultSet.

                                                      type ResultSet

                                                      type ResultSet struct {
                                                      
                                                      	// List of headers for all the data cells in the block. The header identifies the
                                                      	// name and default format of the data cell. Data cells appear in the same order in
                                                      	// all rows as defined in the header. The names and formats are not repeated in the
                                                      	// rows. If a particular row does not have a value for a data cell, a blank value
                                                      	// is used. For example, a task list that displays the task name, due date and
                                                      	// assigned person might have headers [ { "name": "Task Name"}, {"name": "Due
                                                      	// Date", "format": "DATE"}, {"name": "Assigned", "format": "CONTACT"} ]. Every row
                                                      	// in the result will have the task name as the first item, due date as the second
                                                      	// item and assigned person as the third item. If a particular task does not have a
                                                      	// due date, that row will still have a blank value in the second element and the
                                                      	// assigned person will still be in the third element.
                                                      	//
                                                      	// This member is required.
                                                      	Headers []ColumnMetadata
                                                      
                                                      	// List of rows returned by the request. Each row has a row Id and a list of data
                                                      	// cells in that row. The data cells will be present in the same order as they are
                                                      	// defined in the header.
                                                      	//
                                                      	// This member is required.
                                                      	Rows []ResultRow
                                                      }

                                                        ResultSet contains the results of the request for a single block or list defined on the screen.

                                                        type ServiceQuotaExceededException

                                                        type ServiceQuotaExceededException struct {
                                                        	Message *string
                                                        }

                                                          The request caused service quota to be breached.

                                                          func (*ServiceQuotaExceededException) Error

                                                          func (*ServiceQuotaExceededException) ErrorCode

                                                          func (e *ServiceQuotaExceededException) ErrorCode() string

                                                          func (*ServiceQuotaExceededException) ErrorFault

                                                          func (*ServiceQuotaExceededException) ErrorMessage

                                                          func (e *ServiceQuotaExceededException) ErrorMessage() string

                                                          type ServiceUnavailableException

                                                          type ServiceUnavailableException struct {
                                                          	Message *string
                                                          }

                                                            Remote service is unreachable.

                                                            func (*ServiceUnavailableException) Error

                                                            func (*ServiceUnavailableException) ErrorCode

                                                            func (e *ServiceUnavailableException) ErrorCode() string

                                                            func (*ServiceUnavailableException) ErrorFault

                                                            func (*ServiceUnavailableException) ErrorMessage

                                                            func (e *ServiceUnavailableException) ErrorMessage() string

                                                            type SourceDataColumnProperties

                                                            type SourceDataColumnProperties struct {
                                                            
                                                            	// The index of the column in the input file.
                                                            	ColumnIndex int32
                                                            }

                                                              An object that contains the properties for importing data to a specific column in a table.

                                                              type Table

                                                              type Table struct {
                                                              
                                                              	// The id of the table.
                                                              	TableId *string
                                                              
                                                              	// The name of the table.
                                                              	TableName *string
                                                              }

                                                                An object representing the properties of a table in a workbook.

                                                                type TableColumn

                                                                type TableColumn struct {
                                                                
                                                                	// The column level format that is applied in the table. An empty value in this
                                                                	// field means that the column format is the default value 'AUTO'.
                                                                	Format Format
                                                                
                                                                	// The id of the column in the table.
                                                                	TableColumnId *string
                                                                
                                                                	// The name of the column in the table.
                                                                	TableColumnName *string
                                                                }

                                                                  An object that contains attributes about a single column in a table

                                                                  type TableDataImportJobMetadata

                                                                  type TableDataImportJobMetadata struct {
                                                                  
                                                                  	// The source of the data that was submitted for import.
                                                                  	//
                                                                  	// This member is required.
                                                                  	DataSource *ImportDataSource
                                                                  
                                                                  	// The options that was specified at the time of submitting the import request.
                                                                  	//
                                                                  	// This member is required.
                                                                  	ImportOptions *ImportOptions
                                                                  
                                                                  	// The timestamp when the job was submitted for import.
                                                                  	//
                                                                  	// This member is required.
                                                                  	SubmitTime *time.Time
                                                                  
                                                                  	// Details about the submitter of the import request.
                                                                  	//
                                                                  	// This member is required.
                                                                  	Submitter *ImportJobSubmitter
                                                                  }

                                                                    The metadata associated with the table data import job that was submitted.

                                                                    type TableDataImportJobStatus

                                                                    type TableDataImportJobStatus string
                                                                    const (
                                                                    	TableDataImportJobStatusSubmitted  TableDataImportJobStatus = "SUBMITTED"
                                                                    	TableDataImportJobStatusInProgress TableDataImportJobStatus = "IN_PROGRESS"
                                                                    	TableDataImportJobStatusCompleted  TableDataImportJobStatus = "COMPLETED"
                                                                    	TableDataImportJobStatusFailed     TableDataImportJobStatus = "FAILED"
                                                                    )

                                                                      Enum values for TableDataImportJobStatus

                                                                      func (TableDataImportJobStatus) Values

                                                                        Values returns all known values for TableDataImportJobStatus. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                        type TableRow

                                                                        type TableRow struct {
                                                                        
                                                                        	// A list of cells in the table row. The cells appear in the same order as the
                                                                        	// columns of the table.
                                                                        	//
                                                                        	// This member is required.
                                                                        	Cells []Cell
                                                                        
                                                                        	// The id of the row in the table.
                                                                        	//
                                                                        	// This member is required.
                                                                        	RowId *string
                                                                        }

                                                                          An object that contains attributes about a single row in a table

                                                                          type ThrottlingException

                                                                          type ThrottlingException struct {
                                                                          	Message *string
                                                                          }

                                                                            Tps(transactions per second) rate reached.

                                                                            func (*ThrottlingException) Error

                                                                            func (e *ThrottlingException) Error() string

                                                                            func (*ThrottlingException) ErrorCode

                                                                            func (e *ThrottlingException) ErrorCode() string

                                                                            func (*ThrottlingException) ErrorFault

                                                                            func (e *ThrottlingException) ErrorFault() smithy.ErrorFault

                                                                            func (*ThrottlingException) ErrorMessage

                                                                            func (e *ThrottlingException) ErrorMessage() string

                                                                            type UpdateRowData

                                                                            type UpdateRowData struct {
                                                                            
                                                                            	// A map representing the cells to update in the given row. The key is the column
                                                                            	// id of the cell and the value is the CellInput object that represents the data to
                                                                            	// set in that cell.
                                                                            	//
                                                                            	// This member is required.
                                                                            	CellsToUpdate map[string]CellInput
                                                                            
                                                                            	// The id of the row that needs to be updated.
                                                                            	//
                                                                            	// This member is required.
                                                                            	RowId *string
                                                                            }

                                                                              Data needed to create a single row in a table as part of the BatchCreateTableRows request.

                                                                              type UpsertAction

                                                                              type UpsertAction string
                                                                              const (
                                                                              	UpsertActionUpdated  UpsertAction = "UPDATED"
                                                                              	UpsertActionAppended UpsertAction = "APPENDED"
                                                                              )

                                                                                Enum values for UpsertAction

                                                                                func (UpsertAction) Values

                                                                                func (UpsertAction) Values() []UpsertAction

                                                                                  Values returns all known values for UpsertAction. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                  type UpsertRowData

                                                                                  type UpsertRowData struct {
                                                                                  
                                                                                  	// An external identifier that represents a single item in the request that is
                                                                                  	// being upserted as part of the BatchUpsertTableRows request. This can be any
                                                                                  	// string that you can use to identify the item in the request. The
                                                                                  	// BatchUpsertTableRows API puts the batch item id in the results to allow you to
                                                                                  	// link data in the request to data in the results.
                                                                                  	//
                                                                                  	// This member is required.
                                                                                  	BatchItemId *string
                                                                                  
                                                                                  	// A map representing the cells to update for the matching rows or an appended row.
                                                                                  	// The key is the column id of the cell and the value is the CellInput object that
                                                                                  	// represents the data to set in that cell.
                                                                                  	//
                                                                                  	// This member is required.
                                                                                  	CellsToUpdate map[string]CellInput
                                                                                  
                                                                                  	// The filter formula to use to find existing matching rows to update. The formula
                                                                                  	// needs to return zero or more rows. If the formula returns 0 rows, then a new row
                                                                                  	// will be appended in the target table. If the formula returns one or more rows,
                                                                                  	// then the returned rows will be updated. Note that the filter formula needs to
                                                                                  	// return rows from the target table for the upsert operation to succeed. If the
                                                                                  	// filter formula has a syntax error or it doesn't evaluate to zero or more rows in
                                                                                  	// the target table for any one item in the input list, then the entire
                                                                                  	// BatchUpsertTableRows request fails and no updates are made to the table.
                                                                                  	//
                                                                                  	// This member is required.
                                                                                  	Filter *Filter
                                                                                  }

                                                                                    Data needed to upsert rows in a table as part of a single item in the BatchUpsertTableRows request.

                                                                                    type UpsertRowsResult

                                                                                    type UpsertRowsResult struct {
                                                                                    
                                                                                    	// The list of row ids that were changed as part of an upsert row operation. If the
                                                                                    	// upsert resulted in an update, this list could potentially contain multiple rows
                                                                                    	// that matched the filter and hence got updated. If the upsert resulted in an
                                                                                    	// append, this list would only have the single row that was appended.
                                                                                    	//
                                                                                    	// This member is required.
                                                                                    	RowIds []string
                                                                                    
                                                                                    	// The result of the upsert action.
                                                                                    	//
                                                                                    	// This member is required.
                                                                                    	UpsertAction UpsertAction
                                                                                    }

                                                                                      An object that represents the result of a single upsert row request.

                                                                                      type ValidationException

                                                                                      type ValidationException struct {
                                                                                      	Message *string
                                                                                      }

                                                                                        Request is invalid. The message in the response contains details on why the request is invalid.

                                                                                        func (*ValidationException) Error

                                                                                        func (e *ValidationException) Error() string

                                                                                        func (*ValidationException) ErrorCode

                                                                                        func (e *ValidationException) ErrorCode() string

                                                                                        func (*ValidationException) ErrorFault

                                                                                        func (e *ValidationException) ErrorFault() smithy.ErrorFault

                                                                                        func (*ValidationException) ErrorMessage

                                                                                        func (e *ValidationException) ErrorMessage() string

                                                                                        type VariableValue

                                                                                        type VariableValue struct {
                                                                                        
                                                                                        	// Raw value of the variable.
                                                                                        	//
                                                                                        	// This member is required.
                                                                                        	RawValue *string
                                                                                        }

                                                                                          The input variables to the app to be used by the InvokeScreenAutomation action request.