Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type ActionDefinition

type ActionDefinition struct {

	// Stateless inspection criteria that publishes the specified metrics to Amazon
	// CloudWatch for the matching packet. This setting defines a CloudWatch dimension
	// value to be published. You can pair this custom action with any of the standard
	// stateless rule actions. For example, you could pair this in a rule action with
	// the standard action that forwards the packet for stateful inspection. Then, when
	// a packet matches the rule, Network Firewall publishes metrics for the packet and
	// forwards it.
	PublishMetricAction *PublishMetricAction
}

    A custom action to use in stateless rule actions settings. This is used in CustomAction.

    type Address

    type Address struct {
    
    	// Specify an IP address or a block of IP addresses in Classless Inter-Domain
    	// Routing (CIDR) notation. Network Firewall supports all address ranges for IPv4.
    	// Examples:
    	//
    	// * To configure Network Firewall to inspect for the IP address
    	// 192.0.2.44, specify 192.0.2.44/32.
    	//
    	// * To configure Network Firewall to inspect
    	// for IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.
    	//
    	// For more
    	// information about CIDR notation, see the Wikipedia entry Classless Inter-Domain
    	// Routing (https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing).
    	//
    	// This member is required.
    	AddressDefinition *string
    }

      A single IP address specification. This is used in the MatchAttributes source and destination specifications.

      type Attachment

      type Attachment struct {
      
      	// The identifier of the firewall endpoint that Network Firewall has instantiated
      	// in the subnet. You use this to identify the firewall endpoint in the VPC route
      	// tables, when you redirect the VPC traffic through the endpoint.
      	EndpointId *string
      
      	// The current status of the firewall endpoint in the subnet. This value reflects
      	// both the instantiation of the endpoint in the VPC subnet and the sync states
      	// that are reported in the Config settings. When this value is READY, the endpoint
      	// is available and configured properly to handle network traffic. When the
      	// endpoint isn't available for traffic, this value will reflect its state, for
      	// example CREATING, DELETING, or FAILED.
      	Status AttachmentStatus
      
      	// The unique identifier of the subnet that you've specified to be used for a
      	// firewall endpoint.
      	SubnetId *string
      }

        The configuration and status for a single subnet that you've specified for use by the AWS Network Firewall firewall. This is part of the FirewallStatus.

        type AttachmentStatus

        type AttachmentStatus string
        const (
        	AttachmentStatusCreating AttachmentStatus = "CREATING"
        	AttachmentStatusDeleting AttachmentStatus = "DELETING"
        	AttachmentStatusScaling  AttachmentStatus = "SCALING"
        	AttachmentStatusReady    AttachmentStatus = "READY"
        )

          Enum values for AttachmentStatus

          func (AttachmentStatus) Values

            Values returns all known values for AttachmentStatus. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

            type ConfigurationSyncState

            type ConfigurationSyncState string
            const (
            	ConfigurationSyncStatePending ConfigurationSyncState = "PENDING"
            	ConfigurationSyncStateInSync  ConfigurationSyncState = "IN_SYNC"
            )

              Enum values for ConfigurationSyncState

              func (ConfigurationSyncState) Values

                Values returns all known values for ConfigurationSyncState. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                type CustomAction

                type CustomAction struct {
                
                	// The custom action associated with the action name.
                	//
                	// This member is required.
                	ActionDefinition *ActionDefinition
                
                	// The descriptive name of the custom action. You can't change the name of a custom
                	// action after you create it.
                	//
                	// This member is required.
                	ActionName *string
                }

                  An optional, non-standard action to use for stateless packet handling. You can define this in addition to the standard action that you must specify. You define and name the custom actions that you want to be able to use, and then you reference them by name in your actions settings. You can use custom actions in the following places:

                  * In a rule group's StatelessRulesAndCustomActions specification. The custom actions are available for use by name inside the StatelessRulesAndCustomActions where you define them. You can use them for your stateless rule actions to specify what to do with a packet that matches the rule's match attributes.

                  * In a FirewallPolicy specification, in StatelessCustomActions. The custom actions are available for use inside the policy where you define them. You can use them for the policy's default stateless actions settings to specify what to do with packets that don't match any of the policy's stateless rules.

                  type Dimension

                  type Dimension struct {
                  
                  	// The value to use in the custom metric dimension.
                  	//
                  	// This member is required.
                  	Value *string
                  }

                    The value to use in an Amazon CloudWatch custom metric dimension. This is used in the PublishMetricsCustomAction. A CloudWatch custom metric dimension is a name/value pair that's part of the identity of a metric. AWS Network Firewall sets the dimension name to CustomAction and you provide the dimension value. For more information about CloudWatch custom metric dimensions, see Publishing Custom Metrics (https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/publishingMetrics.html#usingDimensions) in the Amazon CloudWatch User Guide (https://docs.aws.amazon.com/AmazonCloudWatch/latest/monitoring/WhatIsCloudWatch.html).

                    type Firewall

                    type Firewall struct {
                    
                    	// The unique identifier for the firewall.
                    	//
                    	// This member is required.
                    	FirewallId *string
                    
                    	// The Amazon Resource Name (ARN) of the firewall policy. The relationship of
                    	// firewall to firewall policy is many to one. Each firewall requires one firewall
                    	// policy association, and you can use the same firewall policy for multiple
                    	// firewalls.
                    	//
                    	// This member is required.
                    	FirewallPolicyArn *string
                    
                    	// The public subnets that Network Firewall is using for the firewall. Each subnet
                    	// must belong to a different Availability Zone.
                    	//
                    	// This member is required.
                    	SubnetMappings []SubnetMapping
                    
                    	// The unique identifier of the VPC where the firewall is in use.
                    	//
                    	// This member is required.
                    	VpcId *string
                    
                    	// A flag indicating whether it is possible to delete the firewall. A setting of
                    	// TRUE indicates that the firewall is protected against deletion. Use this setting
                    	// to protect against accidentally deleting a firewall that is in use. When you
                    	// create a firewall, the operation initializes this flag to TRUE.
                    	DeleteProtection bool
                    
                    	// A description of the firewall.
                    	Description *string
                    
                    	// The Amazon Resource Name (ARN) of the firewall.
                    	FirewallArn *string
                    
                    	// The descriptive name of the firewall. You can't change the name of a firewall
                    	// after you create it.
                    	FirewallName *string
                    
                    	// A setting indicating whether the firewall is protected against a change to the
                    	// firewall policy association. Use this setting to protect against accidentally
                    	// modifying the firewall policy for a firewall that is in use. When you create a
                    	// firewall, the operation initializes this setting to TRUE.
                    	FirewallPolicyChangeProtection bool
                    
                    	// A setting indicating whether the firewall is protected against changes to the
                    	// subnet associations. Use this setting to protect against accidentally modifying
                    	// the subnet associations for a firewall that is in use. When you create a
                    	// firewall, the operation initializes this setting to TRUE.
                    	SubnetChangeProtection bool
                    
                    	//
                    	Tags []Tag
                    }

                      The firewall defines the configuration settings for an AWS Network Firewall firewall. These settings include the firewall policy, the subnets in your VPC to use for the firewall endpoints, and any tags that are attached to the firewall AWS resource. The status of the firewall, for example whether it's ready to filter network traffic, is provided in the corresponding FirewallStatus. You can retrieve both objects by calling DescribeFirewall.

                      type FirewallMetadata

                      type FirewallMetadata struct {
                      
                      	// The Amazon Resource Name (ARN) of the firewall.
                      	FirewallArn *string
                      
                      	// The descriptive name of the firewall. You can't change the name of a firewall
                      	// after you create it.
                      	FirewallName *string
                      }

                        High-level information about a firewall, returned by operations like create and describe. You can use the information provided in the metadata to retrieve and manage a firewall.

                        type FirewallPolicy

                        type FirewallPolicy struct {
                        
                        	// The actions to take on a packet if it doesn't match any of the stateless rules
                        	// in the policy. If you want non-matching packets to be forwarded for stateful
                        	// inspection, specify aws:forward_to_sfe. You must specify one of the standard
                        	// actions: aws:pass, aws:drop, or aws:forward_to_sfe. In addition, you can specify
                        	// custom actions that are compatible with your standard section choice. For
                        	// example, you could specify ["aws:pass"] or you could specify ["aws:pass",
                        	// “customActionName”]. For information about compatibility, see the custom action
                        	// descriptions under CustomAction.
                        	//
                        	// This member is required.
                        	StatelessDefaultActions []string
                        
                        	// The actions to take on a fragmented packet if it doesn't match any of the
                        	// stateless rules in the policy. If you want non-matching fragmented packets to be
                        	// forwarded for stateful inspection, specify aws:forward_to_sfe. You must specify
                        	// one of the standard actions: aws:pass, aws:drop, or aws:forward_to_sfe. In
                        	// addition, you can specify custom actions that are compatible with your standard
                        	// section choice. For example, you could specify ["aws:pass"] or you could specify
                        	// ["aws:pass", “customActionName”]. For information about compatibility, see the
                        	// custom action descriptions under CustomAction.
                        	//
                        	// This member is required.
                        	StatelessFragmentDefaultActions []string
                        
                        	// References to the stateless rule groups that are used in the policy. These
                        	// define the inspection criteria in stateful rules.
                        	StatefulRuleGroupReferences []StatefulRuleGroupReference
                        
                        	// The custom action definitions that are available for use in the firewall
                        	// policy's StatelessDefaultActions setting. You name each custom action that you
                        	// define, and then you can use it by name in your default actions specifications.
                        	StatelessCustomActions []CustomAction
                        
                        	// References to the stateless rule groups that are used in the policy. These
                        	// define the matching criteria in stateless rules.
                        	StatelessRuleGroupReferences []StatelessRuleGroupReference
                        }

                          The firewall policy defines the behavior of a firewall using a collection of stateless and stateful rule groups and other settings. You can use one firewall policy for multiple firewalls. This, along with FirewallPolicyResponse, define the policy. You can retrieve all objects for a firewall policy by calling DescribeFirewallPolicy.

                          type FirewallPolicyMetadata

                          type FirewallPolicyMetadata struct {
                          
                          	// The Amazon Resource Name (ARN) of the firewall policy.
                          	Arn *string
                          
                          	// The descriptive name of the firewall policy. You can't change the name of a
                          	// firewall policy after you create it.
                          	Name *string
                          }

                            High-level information about a firewall policy, returned by operations like create and describe. You can use the information provided in the metadata to retrieve and manage a firewall policy. You can retrieve all objects for a firewall policy by calling DescribeFirewallPolicy.

                            type FirewallPolicyResponse

                            type FirewallPolicyResponse struct {
                            
                            	// The Amazon Resource Name (ARN) of the firewall policy. If this response is for a
                            	// create request that had DryRun set to TRUE, then this ARN is a placeholder that
                            	// isn't attached to a valid resource.
                            	//
                            	// This member is required.
                            	FirewallPolicyArn *string
                            
                            	// The unique identifier for the firewall policy.
                            	//
                            	// This member is required.
                            	FirewallPolicyId *string
                            
                            	// The descriptive name of the firewall policy. You can't change the name of a
                            	// firewall policy after you create it.
                            	//
                            	// This member is required.
                            	FirewallPolicyName *string
                            
                            	// A description of the firewall policy.
                            	Description *string
                            
                            	// The current status of the firewall policy. You can retrieve this for a firewall
                            	// policy by calling DescribeFirewallPolicy and providing the firewall policy's
                            	// name or ARN.
                            	FirewallPolicyStatus ResourceStatus
                            
                            	// The key:value pairs to associate with the resource.
                            	Tags []Tag
                            }

                              The high-level properties of a firewall policy. This, along with the FirewallPolicy, define the policy. You can retrieve all objects for a firewall policy by calling DescribeFirewallPolicy.

                              type FirewallStatus

                              type FirewallStatus struct {
                              
                              	// The configuration sync state for the firewall. This summarizes the sync states
                              	// reported in the Config settings for all of the Availability Zones where you have
                              	// configured the firewall. When you create a firewall or update its configuration,
                              	// for example by adding a rule group to its firewall policy, Network Firewall
                              	// distributes the configuration changes to all zones where the firewall is in use.
                              	// This summary indicates whether the configuration changes have been applied
                              	// everywhere. This status must be IN_SYNC for the firewall to be ready for use,
                              	// but it doesn't indicate that the firewall is ready. The Status setting indicates
                              	// firewall readiness.
                              	//
                              	// This member is required.
                              	ConfigurationSyncStateSummary ConfigurationSyncState
                              
                              	// The readiness of the configured firewall to handle network traffic across all of
                              	// the Availability Zones where you've configured it. This setting is READY only
                              	// when the ConfigurationSyncStateSummary value is IN_SYNC and the AttachmentStatus
                              	// values for all of the configured subnets are READY.
                              	//
                              	// This member is required.
                              	Status FirewallStatusValue
                              
                              	// The subnets that you've configured for use by the Network Firewall firewall.
                              	// This contains one array element per Availability Zone where you've configured a
                              	// subnet. These objects provide details of the information that is summarized in
                              	// the ConfigurationSyncStateSummary and Status, broken down by zone and
                              	// configuration object.
                              	SyncStates map[string]SyncState
                              }

                                Detailed information about the current status of a Firewall. You can retrieve this for a firewall by calling DescribeFirewall and providing the firewall name and ARN.

                                type FirewallStatusValue

                                type FirewallStatusValue string
                                const (
                                	FirewallStatusValueProvisioning FirewallStatusValue = "PROVISIONING"
                                	FirewallStatusValueDeleting     FirewallStatusValue = "DELETING"
                                	FirewallStatusValueReady        FirewallStatusValue = "READY"
                                )

                                  Enum values for FirewallStatusValue

                                  func (FirewallStatusValue) Values

                                    Values returns all known values for FirewallStatusValue. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                    type GeneratedRulesType

                                    type GeneratedRulesType string
                                    const (
                                    	GeneratedRulesTypeAllowlist GeneratedRulesType = "ALLOWLIST"
                                    	GeneratedRulesTypeDenylist  GeneratedRulesType = "DENYLIST"
                                    )

                                      Enum values for GeneratedRulesType

                                      func (GeneratedRulesType) Values

                                        Values returns all known values for GeneratedRulesType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                        type Header struct {
                                        
                                        	// The destination IP address or address range to inspect for, in CIDR notation. To
                                        	// match with any address, specify ANY. Specify an IP address or a block of IP
                                        	// addresses in Classless Inter-Domain Routing (CIDR) notation. Network Firewall
                                        	// supports all address ranges for IPv4. Examples:
                                        	//
                                        	// * To configure Network Firewall
                                        	// to inspect for the IP address 192.0.2.44, specify 192.0.2.44/32.
                                        	//
                                        	// * To configure
                                        	// Network Firewall to inspect for IP addresses from 192.0.2.0 to 192.0.2.255,
                                        	// specify 192.0.2.0/24.
                                        	//
                                        	// For more information about CIDR notation, see the
                                        	// Wikipedia entry Classless Inter-Domain Routing
                                        	// (https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing).
                                        	//
                                        	// This member is required.
                                        	Destination *string
                                        
                                        	// The destination port to inspect for. You can specify an individual port, for
                                        	// example 1994 and you can specify a port range, for example 1990-1994. To match
                                        	// with any port, specify ANY.
                                        	//
                                        	// This member is required.
                                        	DestinationPort *string
                                        
                                        	// The direction of traffic flow to inspect. If set to ANY, the inspection matches
                                        	// bidirectional traffic, both from the source to the destination and from the
                                        	// destination to the source. If set to FORWARD, the inspection only matches
                                        	// traffic going from the source to the destination.
                                        	//
                                        	// This member is required.
                                        	Direction StatefulRuleDirection
                                        
                                        	// The protocol to inspect for. To match with any protocol, specify ANY.
                                        	//
                                        	// This member is required.
                                        	Protocol StatefulRuleProtocol
                                        
                                        	// The source IP address or address range to inspect for, in CIDR notation. To
                                        	// match with any address, specify ANY. Specify an IP address or a block of IP
                                        	// addresses in Classless Inter-Domain Routing (CIDR) notation. Network Firewall
                                        	// supports all address ranges for IPv4. Examples:
                                        	//
                                        	// * To configure Network Firewall
                                        	// to inspect for the IP address 192.0.2.44, specify 192.0.2.44/32.
                                        	//
                                        	// * To configure
                                        	// Network Firewall to inspect for IP addresses from 192.0.2.0 to 192.0.2.255,
                                        	// specify 192.0.2.0/24.
                                        	//
                                        	// For more information about CIDR notation, see the
                                        	// Wikipedia entry Classless Inter-Domain Routing
                                        	// (https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing).
                                        	//
                                        	// This member is required.
                                        	Source *string
                                        
                                        	// The source port to inspect for. You can specify an individual port, for example
                                        	// 1994 and you can specify a port range, for example 1990-1994. To match with any
                                        	// port, specify ANY.
                                        	//
                                        	// This member is required.
                                        	SourcePort *string
                                        }

                                          The 5-tuple criteria for AWS Network Firewall to use to inspect packet headers in stateful traffic flow inspection. Traffic flows that match the criteria are a match for the corresponding StatefulRule.

                                          type IPSet

                                          type IPSet struct {
                                          
                                          	// The list of IP addresses and address ranges, in CIDR notation.
                                          	//
                                          	// This member is required.
                                          	Definition []string
                                          }

                                            A list of IP addresses and address ranges, in CIDR notation. This is part of a RuleVariables.

                                            type InsufficientCapacityException

                                            type InsufficientCapacityException struct {
                                            	Message *string
                                            }

                                              AWS doesn't currently have enough available capacity to fulfill your request. Try your request later.

                                              func (*InsufficientCapacityException) Error

                                              func (*InsufficientCapacityException) ErrorCode

                                              func (e *InsufficientCapacityException) ErrorCode() string

                                              func (*InsufficientCapacityException) ErrorFault

                                              func (*InsufficientCapacityException) ErrorMessage

                                              func (e *InsufficientCapacityException) ErrorMessage() string

                                              type InternalServerError

                                              type InternalServerError struct {
                                              	Message *string
                                              }

                                                Your request is valid, but Network Firewall couldn’t perform the operation because of a system problem. Retry your request.

                                                func (*InternalServerError) Error

                                                func (e *InternalServerError) Error() string

                                                func (*InternalServerError) ErrorCode

                                                func (e *InternalServerError) ErrorCode() string

                                                func (*InternalServerError) ErrorFault

                                                func (e *InternalServerError) ErrorFault() smithy.ErrorFault

                                                func (*InternalServerError) ErrorMessage

                                                func (e *InternalServerError) ErrorMessage() string

                                                type InvalidOperationException

                                                type InvalidOperationException struct {
                                                	Message *string
                                                }

                                                  The operation failed because it's not valid. For example, you might have tried to delete a rule group or firewall policy that's in use.

                                                  func (*InvalidOperationException) Error

                                                  func (e *InvalidOperationException) Error() string

                                                  func (*InvalidOperationException) ErrorCode

                                                  func (e *InvalidOperationException) ErrorCode() string

                                                  func (*InvalidOperationException) ErrorFault

                                                  func (*InvalidOperationException) ErrorMessage

                                                  func (e *InvalidOperationException) ErrorMessage() string

                                                  type InvalidRequestException

                                                  type InvalidRequestException struct {
                                                  	Message *string
                                                  }

                                                    The operation failed because of a problem with your request. Examples include:

                                                    * You specified an unsupported parameter name or value.

                                                    * You tried to update a property with a value that isn't among the available types.

                                                    * Your request references an ARN that is malformed, or corresponds to a resource that isn't valid in the context of the request.

                                                    func (*InvalidRequestException) Error

                                                    func (e *InvalidRequestException) Error() string

                                                    func (*InvalidRequestException) ErrorCode

                                                    func (e *InvalidRequestException) ErrorCode() string

                                                    func (*InvalidRequestException) ErrorFault

                                                    func (e *InvalidRequestException) ErrorFault() smithy.ErrorFault

                                                    func (*InvalidRequestException) ErrorMessage

                                                    func (e *InvalidRequestException) ErrorMessage() string

                                                    type InvalidResourcePolicyException

                                                    type InvalidResourcePolicyException struct {
                                                    	Message *string
                                                    }

                                                    func (*InvalidResourcePolicyException) Error

                                                    func (*InvalidResourcePolicyException) ErrorCode

                                                    func (e *InvalidResourcePolicyException) ErrorCode() string

                                                    func (*InvalidResourcePolicyException) ErrorFault

                                                    func (*InvalidResourcePolicyException) ErrorMessage

                                                    func (e *InvalidResourcePolicyException) ErrorMessage() string

                                                    type InvalidTokenException

                                                    type InvalidTokenException struct {
                                                    	Message *string
                                                    }

                                                      The token you provided is stale or isn't valid for the operation.

                                                      func (*InvalidTokenException) Error

                                                      func (e *InvalidTokenException) Error() string

                                                      func (*InvalidTokenException) ErrorCode

                                                      func (e *InvalidTokenException) ErrorCode() string

                                                      func (*InvalidTokenException) ErrorFault

                                                      func (e *InvalidTokenException) ErrorFault() smithy.ErrorFault

                                                      func (*InvalidTokenException) ErrorMessage

                                                      func (e *InvalidTokenException) ErrorMessage() string

                                                      type LimitExceededException

                                                      type LimitExceededException struct {
                                                      	Message *string
                                                      }

                                                        Unable to perform the operation because doing so would violate a limit setting.

                                                        func (*LimitExceededException) Error

                                                        func (e *LimitExceededException) Error() string

                                                        func (*LimitExceededException) ErrorCode

                                                        func (e *LimitExceededException) ErrorCode() string

                                                        func (*LimitExceededException) ErrorFault

                                                        func (e *LimitExceededException) ErrorFault() smithy.ErrorFault

                                                        func (*LimitExceededException) ErrorMessage

                                                        func (e *LimitExceededException) ErrorMessage() string

                                                        type LogDestinationConfig

                                                        type LogDestinationConfig struct {
                                                        
                                                        	// The named location for the logs, provided in a key:value mapping that is
                                                        	// specific to the chosen destination type.
                                                        	//
                                                        	// * For an Amazon S3 bucket, provide the
                                                        	// name of the bucket, with key bucketName, and optionally provide a prefix, with
                                                        	// key prefix. The following example specifies an Amazon S3 bucket named
                                                        	// DOC-EXAMPLE-BUCKET and the prefix alerts: "LogDestination": { "bucketName":
                                                        	// "DOC-EXAMPLE-BUCKET", "prefix": "alerts" }
                                                        	//
                                                        	// * For a CloudWatch log group,
                                                        	// provide the name of the CloudWatch log group, with key logGroup. The following
                                                        	// example specifies a log group named alert-log-group: "LogDestination": {
                                                        	// "logGroup": "alert-log-group" }
                                                        	//
                                                        	// * For a Kinesis Data Firehose delivery stream,
                                                        	// provide the name of the delivery stream, with key deliveryStream. The following
                                                        	// example specifies a delivery stream named alert-delivery-stream:
                                                        	// "LogDestination": { "deliveryStream": "alert-delivery-stream" }
                                                        	//
                                                        	// This member is required.
                                                        	LogDestination map[string]string
                                                        
                                                        	// The type of storage destination to send these logs to. You can send logs to an
                                                        	// Amazon S3 bucket, a CloudWatch log group, or a Kinesis Data Firehose delivery
                                                        	// stream.
                                                        	//
                                                        	// This member is required.
                                                        	LogDestinationType LogDestinationType
                                                        
                                                        	// The type of log to send. Alert logs report traffic that matches a StatefulRule
                                                        	// with an action setting that sends an alert log message. Flow logs are standard
                                                        	// network traffic flow logs.
                                                        	//
                                                        	// This member is required.
                                                        	LogType LogType
                                                        }

                                                          Defines where AWS Network Firewall sends logs for the firewall for one log type. This is used in LoggingConfiguration. You can send each type of log to an Amazon S3 bucket, a CloudWatch log group, or a Kinesis Data Firehose delivery stream. Network Firewall generates logs for stateful rule groups. You can save alert and flow log types. The stateful rules engine records flow logs for all network traffic that it receives. It records alert logs for traffic that matches stateful rules that have the rule action set to DROP or ALERT.

                                                          type LogDestinationPermissionException

                                                          type LogDestinationPermissionException struct {
                                                          	Message *string
                                                          }

                                                            Unable to send logs to a configured logging destination.

                                                            func (*LogDestinationPermissionException) Error

                                                            func (*LogDestinationPermissionException) ErrorCode

                                                            func (*LogDestinationPermissionException) ErrorFault

                                                            func (*LogDestinationPermissionException) ErrorMessage

                                                            func (e *LogDestinationPermissionException) ErrorMessage() string

                                                            type LogDestinationType

                                                            type LogDestinationType string
                                                            const (
                                                            	LogDestinationTypeS3                  LogDestinationType = "S3"
                                                            	LogDestinationTypeCloudwatchLogs      LogDestinationType = "CloudWatchLogs"
                                                            	LogDestinationTypeKinesisDataFirehose LogDestinationType = "KinesisDataFirehose"
                                                            )

                                                              Enum values for LogDestinationType

                                                              func (LogDestinationType) Values

                                                                Values returns all known values for LogDestinationType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                type LogType

                                                                type LogType string
                                                                const (
                                                                	LogTypeAlert LogType = "ALERT"
                                                                	LogTypeFlow  LogType = "FLOW"
                                                                )

                                                                  Enum values for LogType

                                                                  func (LogType) Values

                                                                  func (LogType) Values() []LogType

                                                                    Values returns all known values for LogType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                    type LoggingConfiguration

                                                                    type LoggingConfiguration struct {
                                                                    
                                                                    	// Defines the logging destinations for the logs for a firewall. Network Firewall
                                                                    	// generates logs for stateful rule groups.
                                                                    	//
                                                                    	// This member is required.
                                                                    	LogDestinationConfigs []LogDestinationConfig
                                                                    }

                                                                      Defines how AWS Network Firewall performs logging for a Firewall.

                                                                      type MatchAttributes

                                                                      type MatchAttributes struct {
                                                                      
                                                                      	// The destination ports to inspect for. If not specified, this matches with any
                                                                      	// destination port. This setting is only used for protocols 6 (TCP) and 17 (UDP).
                                                                      	// You can specify individual ports, for example 1994 and you can specify port
                                                                      	// ranges, for example 1990-1994.
                                                                      	DestinationPorts []PortRange
                                                                      
                                                                      	// The destination IP addresses and address ranges to inspect for, in CIDR
                                                                      	// notation. If not specified, this matches with any destination address.
                                                                      	Destinations []Address
                                                                      
                                                                      	// The protocols to inspect for, specified using each protocol's assigned internet
                                                                      	// protocol number (IANA). If not specified, this matches with any protocol.
                                                                      	Protocols []int32
                                                                      
                                                                      	// The source ports to inspect for. If not specified, this matches with any source
                                                                      	// port. This setting is only used for protocols 6 (TCP) and 17 (UDP). You can
                                                                      	// specify individual ports, for example 1994 and you can specify port ranges, for
                                                                      	// example 1990-1994.
                                                                      	SourcePorts []PortRange
                                                                      
                                                                      	// The source IP addresses and address ranges to inspect for, in CIDR notation. If
                                                                      	// not specified, this matches with any source address.
                                                                      	Sources []Address
                                                                      
                                                                      	// The TCP flags and masks to inspect for. If not specified, this matches with any
                                                                      	// settings. This setting is only used for protocol 6 (TCP).
                                                                      	TCPFlags []TCPFlagField
                                                                      }

                                                                        Criteria for Network Firewall to use to inspect an individual packet in stateless rule inspection. Each match attributes set can include one or more items such as IP address, CIDR range, port number, protocol, and TCP flags.

                                                                        type PerObjectStatus

                                                                        type PerObjectStatus struct {
                                                                        
                                                                        	//
                                                                        	SyncStatus PerObjectSyncStatus
                                                                        }

                                                                        type PerObjectSyncStatus

                                                                        type PerObjectSyncStatus string
                                                                        const (
                                                                        	PerObjectSyncStatusPending PerObjectSyncStatus = "PENDING"
                                                                        	PerObjectSyncStatusInSync  PerObjectSyncStatus = "IN_SYNC"
                                                                        )

                                                                          Enum values for PerObjectSyncStatus

                                                                          func (PerObjectSyncStatus) Values

                                                                            Values returns all known values for PerObjectSyncStatus. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                            type PortRange

                                                                            type PortRange struct {
                                                                            
                                                                            	// The lower limit of the port range. This must be less than or equal to the ToPort
                                                                            	// specification.
                                                                            	//
                                                                            	// This member is required.
                                                                            	FromPort int32
                                                                            
                                                                            	// The upper limit of the port range. This must be greater than or equal to the
                                                                            	// FromPort specification.
                                                                            	//
                                                                            	// This member is required.
                                                                            	ToPort int32
                                                                            }

                                                                              A single port range specification. This is used for source and destination port ranges in the stateless rule MatchAttributes, SourcePorts, and DestinationPorts settings.

                                                                              type PortSet

                                                                              type PortSet struct {
                                                                              
                                                                              	// The set of port ranges.
                                                                              	Definition []string
                                                                              }

                                                                                A set of port ranges for use in the rules in a rule group.

                                                                                type PublishMetricAction

                                                                                type PublishMetricAction struct {
                                                                                
                                                                                	//
                                                                                	//
                                                                                	// This member is required.
                                                                                	Dimensions []Dimension
                                                                                }

                                                                                  Stateless inspection criteria that publishes the specified metrics to Amazon CloudWatch for the matching packet. This setting defines a CloudWatch dimension value to be published.

                                                                                  type ResourceNotFoundException

                                                                                  type ResourceNotFoundException struct {
                                                                                  	Message *string
                                                                                  }

                                                                                    Unable to locate a resource using the parameters that you provided.

                                                                                    func (*ResourceNotFoundException) Error

                                                                                    func (e *ResourceNotFoundException) Error() string

                                                                                    func (*ResourceNotFoundException) ErrorCode

                                                                                    func (e *ResourceNotFoundException) ErrorCode() string

                                                                                    func (*ResourceNotFoundException) ErrorFault

                                                                                    func (*ResourceNotFoundException) ErrorMessage

                                                                                    func (e *ResourceNotFoundException) ErrorMessage() string

                                                                                    type ResourceOwnerCheckException

                                                                                    type ResourceOwnerCheckException struct {
                                                                                    	Message *string
                                                                                    }

                                                                                    func (*ResourceOwnerCheckException) Error

                                                                                    func (*ResourceOwnerCheckException) ErrorCode

                                                                                    func (e *ResourceOwnerCheckException) ErrorCode() string

                                                                                    func (*ResourceOwnerCheckException) ErrorFault

                                                                                    func (*ResourceOwnerCheckException) ErrorMessage

                                                                                    func (e *ResourceOwnerCheckException) ErrorMessage() string

                                                                                    type ResourceStatus

                                                                                    type ResourceStatus string
                                                                                    const (
                                                                                    	ResourceStatusActive   ResourceStatus = "ACTIVE"
                                                                                    	ResourceStatusDeleting ResourceStatus = "DELETING"
                                                                                    )

                                                                                      Enum values for ResourceStatus

                                                                                      func (ResourceStatus) Values

                                                                                      func (ResourceStatus) Values() []ResourceStatus

                                                                                        Values returns all known values for ResourceStatus. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                        type RuleDefinition

                                                                                        type RuleDefinition struct {
                                                                                        
                                                                                        	// The actions to take on a packet that matches one of the stateless rule
                                                                                        	// definition's match attributes. You must specify a standard action and you can
                                                                                        	// add custom actions. Network Firewall only forwards a packet for stateful rule
                                                                                        	// inspection if you specify aws:forward_to_sfe for a rule that the packet matches,
                                                                                        	// or if the packet doesn't match any stateless rule and you specify
                                                                                        	// aws:forward_to_sfe for the StatelessDefaultActions setting for the
                                                                                        	// FirewallPolicy. For every rule, you must specify exactly one of the following
                                                                                        	// standard actions.
                                                                                        	//
                                                                                        	// * aws:pass - Discontinues all inspection of the packet and
                                                                                        	// permits it to go to its intended destination.
                                                                                        	//
                                                                                        	// * aws:drop - Discontinues all
                                                                                        	// inspection of the packet and blocks it from going to its intended
                                                                                        	// destination.
                                                                                        	//
                                                                                        	// * aws:forward_to_sfe - Discontinues stateless inspection of the
                                                                                        	// packet and forwards it to the stateful rule engine for
                                                                                        	// inspection.
                                                                                        	//
                                                                                        	// Additionally, you can specify a custom action. To do this, you
                                                                                        	// define a custom action by name and type, then provide the name you've assigned
                                                                                        	// to the action in this Actions setting. For information about the options, see
                                                                                        	// CustomAction. To provide more than one action in this setting, separate the
                                                                                        	// settings with a comma. For example, if you have a custom PublishMetrics action
                                                                                        	// that you've named MyMetricsAction, then you could specify the standard action
                                                                                        	// aws:pass and the custom action with [“aws:pass”, “MyMetricsAction”].
                                                                                        	//
                                                                                        	// This member is required.
                                                                                        	Actions []string
                                                                                        
                                                                                        	// Criteria for Network Firewall to use to inspect an individual packet in
                                                                                        	// stateless rule inspection. Each match attributes set can include one or more
                                                                                        	// items such as IP address, CIDR range, port number, protocol, and TCP flags.
                                                                                        	//
                                                                                        	// This member is required.
                                                                                        	MatchAttributes *MatchAttributes
                                                                                        }

                                                                                          The inspection criteria and action for a single stateless rule. AWS Network Firewall inspects each packet for the specified matching criteria. When a packet matches the criteria, Network Firewall performs the rule's actions on the packet.

                                                                                          type RuleGroup

                                                                                          type RuleGroup struct {
                                                                                          
                                                                                          	// The stateful rules or stateless rules for the rule group.
                                                                                          	//
                                                                                          	// This member is required.
                                                                                          	RulesSource *RulesSource
                                                                                          
                                                                                          	// Settings that are available for use in the rules in the rule group. You can only
                                                                                          	// use these for stateful rule groups.
                                                                                          	RuleVariables *RuleVariables
                                                                                          }

                                                                                            The object that defines the rules in a rule group. This, along with RuleGroupResponse, define the rule group. You can retrieve all objects for a rule group by calling DescribeRuleGroup. AWS Network Firewall uses a rule group to inspect and control network traffic. You define stateless rule groups to inspect individual packets and you define stateful rule groups to inspect packets in the context of their traffic flow. To use a rule group, you include it by reference in an Network Firewall firewall policy, then you use the policy in a firewall. You can reference a rule group from more than one firewall policy, and you can use a firewall policy in more than one firewall.

                                                                                            type RuleGroupMetadata

                                                                                            type RuleGroupMetadata struct {
                                                                                            
                                                                                            	// The Amazon Resource Name (ARN) of the rule group.
                                                                                            	Arn *string
                                                                                            
                                                                                            	// The descriptive name of the rule group. You can't change the name of a rule
                                                                                            	// group after you create it.
                                                                                            	Name *string
                                                                                            }

                                                                                              High-level information about a rule group, returned by ListRuleGroups. You can use the information provided in the metadata to retrieve and manage a rule group.

                                                                                              type RuleGroupResponse

                                                                                              type RuleGroupResponse struct {
                                                                                              
                                                                                              	// The Amazon Resource Name (ARN) of the rule group. If this response is for a
                                                                                              	// create request that had DryRun set to TRUE, then this ARN is a placeholder that
                                                                                              	// isn't attached to a valid resource.
                                                                                              	//
                                                                                              	// This member is required.
                                                                                              	RuleGroupArn *string
                                                                                              
                                                                                              	// The unique identifier for the rule group.
                                                                                              	//
                                                                                              	// This member is required.
                                                                                              	RuleGroupId *string
                                                                                              
                                                                                              	// The descriptive name of the rule group. You can't change the name of a rule
                                                                                              	// group after you create it.
                                                                                              	//
                                                                                              	// This member is required.
                                                                                              	RuleGroupName *string
                                                                                              
                                                                                              	// The maximum operating resources that this rule group can use. Rule group
                                                                                              	// capacity is fixed at creation. When you update a rule group, you are limited to
                                                                                              	// this capacity. When you reference a rule group from a firewall policy, Network
                                                                                              	// Firewall reserves this capacity for the rule group. You can retrieve the
                                                                                              	// capacity that would be required for a rule group before you create the rule
                                                                                              	// group by calling CreateRuleGroup with DryRun set to TRUE.
                                                                                              	Capacity *int32
                                                                                              
                                                                                              	// A description of the rule group.
                                                                                              	Description *string
                                                                                              
                                                                                              	// Detailed information about the current status of a rule group.
                                                                                              	RuleGroupStatus ResourceStatus
                                                                                              
                                                                                              	// The key:value pairs to associate with the resource.
                                                                                              	Tags []Tag
                                                                                              
                                                                                              	// Indicates whether the rule group is stateless or stateful. If the rule group is
                                                                                              	// stateless, it contains stateless rules. If it is stateful, it contains stateful
                                                                                              	// rules.
                                                                                              	Type RuleGroupType
                                                                                              }

                                                                                                The high-level properties of a rule group. This, along with the RuleGroup, define the rule group. You can retrieve all objects for a rule group by calling DescribeRuleGroup.

                                                                                                type RuleGroupType

                                                                                                type RuleGroupType string
                                                                                                const (
                                                                                                	RuleGroupTypeStateless RuleGroupType = "STATELESS"
                                                                                                	RuleGroupTypeStateful  RuleGroupType = "STATEFUL"
                                                                                                )

                                                                                                  Enum values for RuleGroupType

                                                                                                  func (RuleGroupType) Values

                                                                                                  func (RuleGroupType) Values() []RuleGroupType

                                                                                                    Values returns all known values for RuleGroupType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                    type RuleOption

                                                                                                    type RuleOption struct {
                                                                                                    
                                                                                                    	//
                                                                                                    	//
                                                                                                    	// This member is required.
                                                                                                    	Keyword *string
                                                                                                    
                                                                                                    	//
                                                                                                    	Settings []string
                                                                                                    }

                                                                                                      Additional settings for a stateful rule. This is part of the StatefulRule configuration.

                                                                                                      type RuleVariables

                                                                                                      type RuleVariables struct {
                                                                                                      
                                                                                                      	// A list of IP addresses and address ranges, in CIDR notation.
                                                                                                      	IPSets map[string]IPSet
                                                                                                      
                                                                                                      	// A list of port ranges.
                                                                                                      	PortSets map[string]PortSet
                                                                                                      }

                                                                                                        Settings that are available for use in the rules in the RuleGroup where this is defined.

                                                                                                        type RulesSource

                                                                                                        type RulesSource struct {
                                                                                                        
                                                                                                        	// Stateful inspection criteria for a domain list rule group.
                                                                                                        	RulesSourceList *RulesSourceList
                                                                                                        
                                                                                                        	// Stateful inspection criteria, provided in Suricata compatible intrusion
                                                                                                        	// prevention system (IPS) rules. Suricata is an open-source network IPS that
                                                                                                        	// includes a standard rule-based language for network traffic inspection. These
                                                                                                        	// rules contain the inspection criteria and the action to take for traffic that
                                                                                                        	// matches the criteria, so this type of rule group doesn't have a separate action
                                                                                                        	// setting. You can provide the rules from a file that you've stored in an Amazon
                                                                                                        	// S3 bucket, or by providing the rules in a Suricata rules string. To import from
                                                                                                        	// Amazon S3, provide the fully qualified name of the file that contains the rules
                                                                                                        	// definitions. To provide a Suricata rule string, provide the complete, Suricata
                                                                                                        	// compatible rule.
                                                                                                        	RulesString *string
                                                                                                        
                                                                                                        	// The 5-tuple stateful inspection criteria. This contains an array of individual
                                                                                                        	// 5-tuple stateful rules to be used together in a stateful rule group.
                                                                                                        	StatefulRules []StatefulRule
                                                                                                        
                                                                                                        	// Stateless inspection criteria to be used in a stateless rule group.
                                                                                                        	StatelessRulesAndCustomActions *StatelessRulesAndCustomActions
                                                                                                        }

                                                                                                          The stateless or stateful rules definitions for use in a single rule group. Each rule group requires a single RulesSource. You can use an instance of this for either stateless rules or stateful rules.

                                                                                                          type RulesSourceList

                                                                                                          type RulesSourceList struct {
                                                                                                          
                                                                                                          	// Whether you want to allow or deny access to the domains in your target list.
                                                                                                          	//
                                                                                                          	// This member is required.
                                                                                                          	GeneratedRulesType GeneratedRulesType
                                                                                                          
                                                                                                          	//
                                                                                                          	//
                                                                                                          	// This member is required.
                                                                                                          	TargetTypes []TargetType
                                                                                                          
                                                                                                          	// The domains that you want to inspect for in your traffic flows. To provide
                                                                                                          	// multiple domains, separate them with commas.
                                                                                                          	//
                                                                                                          	// This member is required.
                                                                                                          	Targets []string
                                                                                                          }

                                                                                                            Stateful inspection criteria for a domain list rule group.

                                                                                                            type StatefulAction

                                                                                                            type StatefulAction string
                                                                                                            const (
                                                                                                            	StatefulActionPass  StatefulAction = "PASS"
                                                                                                            	StatefulActionDrop  StatefulAction = "DROP"
                                                                                                            	StatefulActionAlert StatefulAction = "ALERT"
                                                                                                            )

                                                                                                              Enum values for StatefulAction

                                                                                                              func (StatefulAction) Values

                                                                                                              func (StatefulAction) Values() []StatefulAction

                                                                                                                Values returns all known values for StatefulAction. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                type StatefulRule

                                                                                                                type StatefulRule struct {
                                                                                                                
                                                                                                                	// Defines what Network Firewall should do with the packets in a traffic flow when
                                                                                                                	// the flow matches the stateful rule criteria. For all actions, Network Firewall
                                                                                                                	// performs the specified action and discontinues stateful inspection of the
                                                                                                                	// traffic flow. The actions for a stateful rule are defined as follows:
                                                                                                                	//
                                                                                                                	// * PASS -
                                                                                                                	// Permits the packets to go to the intended destination.
                                                                                                                	//
                                                                                                                	// * DROP - Blocks the
                                                                                                                	// packets from going to the intended destination and sends an alert log message,
                                                                                                                	// if alert logging is configured in the FirewallLoggingConfiguration.
                                                                                                                	//
                                                                                                                	// * ALERT -
                                                                                                                	// Permits the packets to go to the intended destination and sends an alert log
                                                                                                                	// message, if alert logging is configured in the FirewallLoggingConfiguration. You
                                                                                                                	// can use this action to test a rule that you intend to use to drop traffic. You
                                                                                                                	// can enable the rule with ALERT action, verify in the logs that the rule is
                                                                                                                	// filtering as you want, then change the action to DROP.
                                                                                                                	//
                                                                                                                	// This member is required.
                                                                                                                	Action StatefulAction
                                                                                                                
                                                                                                                	// The stateful 5-tuple inspection criteria for this rule, used to inspect traffic
                                                                                                                	// flows.
                                                                                                                	//
                                                                                                                	// This member is required.
                                                                                                                	Header *Header
                                                                                                                
                                                                                                                	//
                                                                                                                	//
                                                                                                                	// This member is required.
                                                                                                                	RuleOptions []RuleOption
                                                                                                                }

                                                                                                                  A single 5-tuple stateful rule, for use in a stateful rule group.

                                                                                                                  type StatefulRuleDirection

                                                                                                                  type StatefulRuleDirection string
                                                                                                                  const (
                                                                                                                  	StatefulRuleDirectionForward StatefulRuleDirection = "FORWARD"
                                                                                                                  	StatefulRuleDirectionAny     StatefulRuleDirection = "ANY"
                                                                                                                  )

                                                                                                                    Enum values for StatefulRuleDirection

                                                                                                                    func (StatefulRuleDirection) Values

                                                                                                                      Values returns all known values for StatefulRuleDirection. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                      type StatefulRuleGroupReference

                                                                                                                      type StatefulRuleGroupReference struct {
                                                                                                                      
                                                                                                                      	// The Amazon Resource Name (ARN) of the stateful rule group.
                                                                                                                      	//
                                                                                                                      	// This member is required.
                                                                                                                      	ResourceArn *string
                                                                                                                      }

                                                                                                                        Identifier for a single stateful rule group, used in a firewall policy to refer to a rule group.

                                                                                                                        type StatefulRuleProtocol

                                                                                                                        type StatefulRuleProtocol string
                                                                                                                        const (
                                                                                                                        	StatefulRuleProtocolAny    StatefulRuleProtocol = "IP"
                                                                                                                        	StatefulRuleProtocolTcp    StatefulRuleProtocol = "TCP"
                                                                                                                        	StatefulRuleProtocolUdp    StatefulRuleProtocol = "UDP"
                                                                                                                        	StatefulRuleProtocolIcmp   StatefulRuleProtocol = "ICMP"
                                                                                                                        	StatefulRuleProtocolHttp   StatefulRuleProtocol = "HTTP"
                                                                                                                        	StatefulRuleProtocolFtp    StatefulRuleProtocol = "FTP"
                                                                                                                        	StatefulRuleProtocolTls    StatefulRuleProtocol = "TLS"
                                                                                                                        	StatefulRuleProtocolSmb    StatefulRuleProtocol = "SMB"
                                                                                                                        	StatefulRuleProtocolDns    StatefulRuleProtocol = "DNS"
                                                                                                                        	StatefulRuleProtocolDcerpc StatefulRuleProtocol = "DCERPC"
                                                                                                                        	StatefulRuleProtocolSsh    StatefulRuleProtocol = "SSH"
                                                                                                                        	StatefulRuleProtocolSmtp   StatefulRuleProtocol = "SMTP"
                                                                                                                        	StatefulRuleProtocolImap   StatefulRuleProtocol = "IMAP"
                                                                                                                        	StatefulRuleProtocolMsn    StatefulRuleProtocol = "MSN"
                                                                                                                        	StatefulRuleProtocolKrb5   StatefulRuleProtocol = "KRB5"
                                                                                                                        	StatefulRuleProtocolIkev2  StatefulRuleProtocol = "IKEV2"
                                                                                                                        	StatefulRuleProtocolTftp   StatefulRuleProtocol = "TFTP"
                                                                                                                        	StatefulRuleProtocolNtp    StatefulRuleProtocol = "NTP"
                                                                                                                        	StatefulRuleProtocolDhcp   StatefulRuleProtocol = "DHCP"
                                                                                                                        )

                                                                                                                          Enum values for StatefulRuleProtocol

                                                                                                                          func (StatefulRuleProtocol) Values

                                                                                                                            Values returns all known values for StatefulRuleProtocol. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                            type StatelessRule

                                                                                                                            type StatelessRule struct {
                                                                                                                            
                                                                                                                            	// A setting that indicates the order in which to run this rule relative to all of
                                                                                                                            	// the rules that are defined for a stateless rule group. Network Firewall
                                                                                                                            	// evaluates the rules in a rule group starting with the lowest priority setting.
                                                                                                                            	// You must ensure that the priority settings are unique for the rule group. Each
                                                                                                                            	// stateless rule group uses exactly one StatelessRulesAndCustomActions object, and
                                                                                                                            	// each StatelessRulesAndCustomActions contains exactly one StatelessRules object.
                                                                                                                            	// To ensure unique priority settings for your rule groups, set unique priorities
                                                                                                                            	// for the stateless rules that you define inside any single StatelessRules object.
                                                                                                                            	// You can change the priority settings of your rules at any time. To make it
                                                                                                                            	// easier to insert rules later, number them so there's a wide range in between,
                                                                                                                            	// for example use 100, 200, and so on.
                                                                                                                            	//
                                                                                                                            	// This member is required.
                                                                                                                            	Priority int32
                                                                                                                            
                                                                                                                            	// Defines the stateless 5-tuple packet inspection criteria and the action to take
                                                                                                                            	// on a packet that matches the criteria.
                                                                                                                            	//
                                                                                                                            	// This member is required.
                                                                                                                            	RuleDefinition *RuleDefinition
                                                                                                                            }

                                                                                                                              A single stateless rule. This is used in StatelessRulesAndCustomActions.

                                                                                                                              type StatelessRuleGroupReference

                                                                                                                              type StatelessRuleGroupReference struct {
                                                                                                                              
                                                                                                                              	// An integer setting that indicates the order in which to run the stateless rule
                                                                                                                              	// groups in a single FirewallPolicy. Network Firewall applies each stateless rule
                                                                                                                              	// group to a packet starting with the group that has the lowest priority setting.
                                                                                                                              	// You must ensure that the priority settings are unique within each policy.
                                                                                                                              	//
                                                                                                                              	// This member is required.
                                                                                                                              	Priority int32
                                                                                                                              
                                                                                                                              	// The Amazon Resource Name (ARN) of the stateless rule group.
                                                                                                                              	//
                                                                                                                              	// This member is required.
                                                                                                                              	ResourceArn *string
                                                                                                                              }

                                                                                                                                Identifier for a single stateless rule group, used in a firewall policy to refer to the rule group.

                                                                                                                                type StatelessRulesAndCustomActions

                                                                                                                                type StatelessRulesAndCustomActions struct {
                                                                                                                                
                                                                                                                                	// Defines the set of stateless rules for use in a stateless rule group.
                                                                                                                                	//
                                                                                                                                	// This member is required.
                                                                                                                                	StatelessRules []StatelessRule
                                                                                                                                
                                                                                                                                	// Defines an array of individual custom action definitions that are available for
                                                                                                                                	// use by the stateless rules in this StatelessRulesAndCustomActions specification.
                                                                                                                                	// You name each custom action that you define, and then you can use it by name in
                                                                                                                                	// your StatelessRuleRuleDefinitionActions specification.
                                                                                                                                	CustomActions []CustomAction
                                                                                                                                }

                                                                                                                                  Stateless inspection criteria. Each stateless rule group uses exactly one of these data types to define its stateless rules.

                                                                                                                                  type SubnetMapping

                                                                                                                                  type SubnetMapping struct {
                                                                                                                                  
                                                                                                                                  	// The unique identifier for the subnet.
                                                                                                                                  	//
                                                                                                                                  	// This member is required.
                                                                                                                                  	SubnetId *string
                                                                                                                                  }

                                                                                                                                    The ID for a subnet that you want to associate with the firewall. This is used with CreateFirewall and AssociateSubnets. AWS Network Firewall creates an instance of the associated firewall in each subnet that you specify, to filter traffic in the subnet's Availability Zone.

                                                                                                                                    type SyncState

                                                                                                                                    type SyncState struct {
                                                                                                                                    
                                                                                                                                    	// The attachment status of the firewall's association with a single VPC subnet.
                                                                                                                                    	// For each configured subnet, Network Firewall creates the attachment by
                                                                                                                                    	// instantiating the firewall endpoint in the subnet so that it's ready to take
                                                                                                                                    	// traffic. This is part of the FirewallStatus.
                                                                                                                                    	Attachment *Attachment
                                                                                                                                    
                                                                                                                                    	// The configuration status of the firewall endpoint in a single VPC subnet.
                                                                                                                                    	// Network Firewall provides each endpoint with the rules that are configured in
                                                                                                                                    	// the firewall policy. Each time you add a subnet or modify the associated
                                                                                                                                    	// firewall policy, Network Firewall synchronizes the rules in the endpoint, so it
                                                                                                                                    	// can properly filter network traffic. This is part of the FirewallStatus.
                                                                                                                                    	Config map[string]PerObjectStatus
                                                                                                                                    }

                                                                                                                                      The status of the firewall endpoint and firewall policy configuration for a single VPC subnet. For each VPC subnet that you associate with a firewall, AWS Network Firewall does the following:

                                                                                                                                      * Instantiates a firewall endpoint in the subnet, ready to take traffic.

                                                                                                                                      * Configures the endpoint with the current firewall policy settings, to provide the filtering behavior for the endpoint.

                                                                                                                                      When you update a firewall, for example to add a subnet association or change a rule group in the firewall policy, the affected sync states reflect out-of-sync or not ready status until the changes are complete.

                                                                                                                                      type TCPFlag

                                                                                                                                      type TCPFlag string
                                                                                                                                      const (
                                                                                                                                      	TCPFlagFin TCPFlag = "FIN"
                                                                                                                                      	TCPFlagSyn TCPFlag = "SYN"
                                                                                                                                      	TCPFlagRst TCPFlag = "RST"
                                                                                                                                      	TCPFlagPsh TCPFlag = "PSH"
                                                                                                                                      	TCPFlagAck TCPFlag = "ACK"
                                                                                                                                      	TCPFlagUrg TCPFlag = "URG"
                                                                                                                                      	TCPFlagEce TCPFlag = "ECE"
                                                                                                                                      	TCPFlagCwr TCPFlag = "CWR"
                                                                                                                                      )

                                                                                                                                        Enum values for TCPFlag

                                                                                                                                        func (TCPFlag) Values

                                                                                                                                        func (TCPFlag) Values() []TCPFlag

                                                                                                                                          Values returns all known values for TCPFlag. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                          type TCPFlagField

                                                                                                                                          type TCPFlagField struct {
                                                                                                                                          
                                                                                                                                          	// Used in conjunction with the Masks setting to define the flags that must be set
                                                                                                                                          	// and flags that must not be set in order for the packet to match. This setting
                                                                                                                                          	// can only specify values that are also specified in the Masks setting. For the
                                                                                                                                          	// flags that are specified in the masks setting, the following must be true for
                                                                                                                                          	// the packet to match:
                                                                                                                                          	//
                                                                                                                                          	// * The ones that are set in this flags setting must be set
                                                                                                                                          	// in the packet.
                                                                                                                                          	//
                                                                                                                                          	// * The ones that are not set in this flags setting must also not
                                                                                                                                          	// be set in the packet.
                                                                                                                                          	//
                                                                                                                                          	// This member is required.
                                                                                                                                          	Flags []TCPFlag
                                                                                                                                          
                                                                                                                                          	// The set of flags to consider in the inspection. To inspect all flags in the
                                                                                                                                          	// valid values list, leave this with no setting.
                                                                                                                                          	Masks []TCPFlag
                                                                                                                                          }

                                                                                                                                            TCP flags and masks to inspect packets for, used in stateless rules MatchAttributes settings.

                                                                                                                                            type Tag

                                                                                                                                            type Tag struct {
                                                                                                                                            
                                                                                                                                            	// The part of the key:value pair that defines a tag. You can use a tag key to
                                                                                                                                            	// describe a category of information, such as "customer." Tag keys are
                                                                                                                                            	// case-sensitive.
                                                                                                                                            	//
                                                                                                                                            	// This member is required.
                                                                                                                                            	Key *string
                                                                                                                                            
                                                                                                                                            	// The part of the key:value pair that defines a tag. You can use a tag value to
                                                                                                                                            	// describe a specific value within a category, such as "companyA" or "companyB."
                                                                                                                                            	// Tag values are case-sensitive.
                                                                                                                                            	//
                                                                                                                                            	// This member is required.
                                                                                                                                            	Value *string
                                                                                                                                            }

                                                                                                                                              A key:value pair associated with an AWS resource. The key:value pair can be anything you define. Typically, the tag key represents a category (such as "environment") and the tag value represents a specific value within that category (such as "test," "development," or "production"). You can add up to 50 tags to each AWS resource.

                                                                                                                                              type TargetType

                                                                                                                                              type TargetType string
                                                                                                                                              const (
                                                                                                                                              	TargetTypeTlsSni   TargetType = "TLS_SNI"
                                                                                                                                              	TargetTypeHttpHost TargetType = "HTTP_HOST"
                                                                                                                                              )

                                                                                                                                                Enum values for TargetType

                                                                                                                                                func (TargetType) Values

                                                                                                                                                func (TargetType) Values() []TargetType

                                                                                                                                                  Values returns all known values for TargetType. Note that this can be expanded in the future, and so it is only as up to date as the client. The ordering of this slice is not guaranteed to be stable across updates.

                                                                                                                                                  type ThrottlingException

                                                                                                                                                  type ThrottlingException struct {
                                                                                                                                                  	Message *string
                                                                                                                                                  }

                                                                                                                                                    Unable to process the request due to throttling limitations.

                                                                                                                                                    func (*ThrottlingException) Error

                                                                                                                                                    func (e *ThrottlingException) Error() string

                                                                                                                                                    func (*ThrottlingException) ErrorCode

                                                                                                                                                    func (e *ThrottlingException) ErrorCode() string

                                                                                                                                                    func (*ThrottlingException) ErrorFault

                                                                                                                                                    func (e *ThrottlingException) ErrorFault() smithy.ErrorFault

                                                                                                                                                    func (*ThrottlingException) ErrorMessage

                                                                                                                                                    func (e *ThrottlingException) ErrorMessage() string

                                                                                                                                                    type UnsupportedOperationException

                                                                                                                                                    type UnsupportedOperationException struct {
                                                                                                                                                    	Message *string
                                                                                                                                                    }

                                                                                                                                                      The operation you requested isn't supported by Network Firewall.

                                                                                                                                                      func (*UnsupportedOperationException) Error

                                                                                                                                                      func (*UnsupportedOperationException) ErrorCode

                                                                                                                                                      func (e *UnsupportedOperationException) ErrorCode() string

                                                                                                                                                      func (*UnsupportedOperationException) ErrorFault

                                                                                                                                                      func (*UnsupportedOperationException) ErrorMessage

                                                                                                                                                      func (e *UnsupportedOperationException) ErrorMessage() string