internetgateway1

package
v1.3.4 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Feb 29, 2016 License: GPL-3.0, BSD-2-Clause Imports: 4 Imported by: 0

Documentation

Overview

Client for UPnP Device Control Protocol Internet Gateway Device v1.

This DCP is documented in detail at: http://upnp.org/specs/gw/UPnP-gw-InternetGatewayDevice-v1-Device.pdf

Typically, use one of the New* functions to create clients for services.

Index

Constants

View Source
const (
	URN_LANDevice_1           = "urn:schemas-upnp-org:device:LANDevice:1"
	URN_WANConnectionDevice_1 = "urn:schemas-upnp-org:device:WANConnectionDevice:1"
	URN_WANDevice_1           = "urn:schemas-upnp-org:device:WANDevice:1"
)

Device URNs:

View Source
const (
	URN_LANHostConfigManagement_1  = "urn:schemas-upnp-org:service:LANHostConfigManagement:1"
	URN_Layer3Forwarding_1         = "urn:schemas-upnp-org:service:Layer3Forwarding:1"
	URN_WANCableLinkConfig_1       = "urn:schemas-upnp-org:service:WANCableLinkConfig:1"
	URN_WANCommonInterfaceConfig_1 = "urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1"
	URN_WANDSLLinkConfig_1         = "urn:schemas-upnp-org:service:WANDSLLinkConfig:1"
	URN_WANEthernetLinkConfig_1    = "urn:schemas-upnp-org:service:WANEthernetLinkConfig:1"
	URN_WANIPConnection_1          = "urn:schemas-upnp-org:service:WANIPConnection:1"
	URN_WANPOTSLinkConfig_1        = "urn:schemas-upnp-org:service:WANPOTSLinkConfig:1"
	URN_WANPPPConnection_1         = "urn:schemas-upnp-org:service:WANPPPConnection:1"
)

Service URNs:

Variables

This section is empty.

Functions

This section is empty.

Types

type LANHostConfigManagement1

type LANHostConfigManagement1 struct {
	goupnp.ServiceClient
}

LANHostConfigManagement1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:LANHostConfigManagement:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewLANHostConfigManagement1Clients

func NewLANHostConfigManagement1Clients() (clients []*LANHostConfigManagement1, errors []error, err error)

NewLANHostConfigManagement1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewLANHostConfigManagement1ClientsByURL added in v1.3.1

func NewLANHostConfigManagement1ClientsByURL(loc *url.URL) ([]*LANHostConfigManagement1, error)

NewLANHostConfigManagement1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewLANHostConfigManagement1ClientsFromRootDevice added in v1.3.1

func NewLANHostConfigManagement1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*LANHostConfigManagement1, error)

NewLANHostConfigManagement1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*LANHostConfigManagement1) DeleteDNSServer

func (client *LANHostConfigManagement1) DeleteDNSServer(NewDNSServers string) (err error)

func (*LANHostConfigManagement1) DeleteIPRouter

func (client *LANHostConfigManagement1) DeleteIPRouter(NewIPRouters string) (err error)

func (*LANHostConfigManagement1) DeleteReservedAddress

func (client *LANHostConfigManagement1) DeleteReservedAddress(NewReservedAddresses string) (err error)

func (*LANHostConfigManagement1) GetAddressRange

func (client *LANHostConfigManagement1) GetAddressRange() (NewMinAddress string, NewMaxAddress string, err error)

func (*LANHostConfigManagement1) GetDHCPRelay

func (client *LANHostConfigManagement1) GetDHCPRelay() (NewDHCPRelay bool, err error)

func (*LANHostConfigManagement1) GetDHCPServerConfigurable

func (client *LANHostConfigManagement1) GetDHCPServerConfigurable() (NewDHCPServerConfigurable bool, err error)

func (*LANHostConfigManagement1) GetDNSServers

func (client *LANHostConfigManagement1) GetDNSServers() (NewDNSServers string, err error)

func (*LANHostConfigManagement1) GetDomainName

func (client *LANHostConfigManagement1) GetDomainName() (NewDomainName string, err error)

func (*LANHostConfigManagement1) GetIPRoutersList

func (client *LANHostConfigManagement1) GetIPRoutersList() (NewIPRouters string, err error)

func (*LANHostConfigManagement1) GetReservedAddresses

func (client *LANHostConfigManagement1) GetReservedAddresses() (NewReservedAddresses string, err error)

func (*LANHostConfigManagement1) GetSubnetMask

func (client *LANHostConfigManagement1) GetSubnetMask() (NewSubnetMask string, err error)

func (*LANHostConfigManagement1) SetAddressRange

func (client *LANHostConfigManagement1) SetAddressRange(NewMinAddress string, NewMaxAddress string) (err error)

func (*LANHostConfigManagement1) SetDHCPRelay

func (client *LANHostConfigManagement1) SetDHCPRelay(NewDHCPRelay bool) (err error)

func (*LANHostConfigManagement1) SetDHCPServerConfigurable

func (client *LANHostConfigManagement1) SetDHCPServerConfigurable(NewDHCPServerConfigurable bool) (err error)

func (*LANHostConfigManagement1) SetDNSServer

func (client *LANHostConfigManagement1) SetDNSServer(NewDNSServers string) (err error)

func (*LANHostConfigManagement1) SetDomainName

func (client *LANHostConfigManagement1) SetDomainName(NewDomainName string) (err error)

func (*LANHostConfigManagement1) SetIPRouter

func (client *LANHostConfigManagement1) SetIPRouter(NewIPRouters string) (err error)

func (*LANHostConfigManagement1) SetReservedAddress

func (client *LANHostConfigManagement1) SetReservedAddress(NewReservedAddresses string) (err error)

func (*LANHostConfigManagement1) SetSubnetMask

func (client *LANHostConfigManagement1) SetSubnetMask(NewSubnetMask string) (err error)

type Layer3Forwarding1

type Layer3Forwarding1 struct {
	goupnp.ServiceClient
}

Layer3Forwarding1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:Layer3Forwarding:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewLayer3Forwarding1Clients

func NewLayer3Forwarding1Clients() (clients []*Layer3Forwarding1, errors []error, err error)

NewLayer3Forwarding1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewLayer3Forwarding1ClientsByURL added in v1.3.1

func NewLayer3Forwarding1ClientsByURL(loc *url.URL) ([]*Layer3Forwarding1, error)

NewLayer3Forwarding1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewLayer3Forwarding1ClientsFromRootDevice added in v1.3.1

func NewLayer3Forwarding1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*Layer3Forwarding1, error)

NewLayer3Forwarding1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*Layer3Forwarding1) GetDefaultConnectionService

func (client *Layer3Forwarding1) GetDefaultConnectionService() (NewDefaultConnectionService string, err error)

func (*Layer3Forwarding1) SetDefaultConnectionService

func (client *Layer3Forwarding1) SetDefaultConnectionService(NewDefaultConnectionService string) (err error)

type WANCableLinkConfig1

type WANCableLinkConfig1 struct {
	goupnp.ServiceClient
}

WANCableLinkConfig1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:WANCableLinkConfig:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewWANCableLinkConfig1Clients

func NewWANCableLinkConfig1Clients() (clients []*WANCableLinkConfig1, errors []error, err error)

NewWANCableLinkConfig1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewWANCableLinkConfig1ClientsByURL added in v1.3.1

func NewWANCableLinkConfig1ClientsByURL(loc *url.URL) ([]*WANCableLinkConfig1, error)

NewWANCableLinkConfig1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewWANCableLinkConfig1ClientsFromRootDevice added in v1.3.1

func NewWANCableLinkConfig1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*WANCableLinkConfig1, error)

NewWANCableLinkConfig1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*WANCableLinkConfig1) GetBPIEncryptionEnabled

func (client *WANCableLinkConfig1) GetBPIEncryptionEnabled() (NewBPIEncryptionEnabled bool, err error)

func (*WANCableLinkConfig1) GetCableLinkConfigInfo

func (client *WANCableLinkConfig1) GetCableLinkConfigInfo() (NewCableLinkConfigState string, NewLinkType string, err error)

Return values:

* NewCableLinkConfigState: allowed values: notReady, dsSyncComplete, usParamAcquired, rangingComplete, ipComplete, todEstablished, paramTransferComplete, registrationComplete, operational, accessDenied

* NewLinkType: allowed values: Ethernet

func (*WANCableLinkConfig1) GetConfigFile

func (client *WANCableLinkConfig1) GetConfigFile() (NewConfigFile string, err error)

func (*WANCableLinkConfig1) GetDownstreamFrequency

func (client *WANCableLinkConfig1) GetDownstreamFrequency() (NewDownstreamFrequency uint32, err error)

func (*WANCableLinkConfig1) GetDownstreamModulation

func (client *WANCableLinkConfig1) GetDownstreamModulation() (NewDownstreamModulation string, err error)

Return values:

* NewDownstreamModulation: allowed values: 64QAM, 256QAM

func (*WANCableLinkConfig1) GetTFTPServer

func (client *WANCableLinkConfig1) GetTFTPServer() (NewTFTPServer string, err error)

func (*WANCableLinkConfig1) GetUpstreamChannelID

func (client *WANCableLinkConfig1) GetUpstreamChannelID() (NewUpstreamChannelID uint32, err error)

func (*WANCableLinkConfig1) GetUpstreamFrequency

func (client *WANCableLinkConfig1) GetUpstreamFrequency() (NewUpstreamFrequency uint32, err error)

func (*WANCableLinkConfig1) GetUpstreamModulation

func (client *WANCableLinkConfig1) GetUpstreamModulation() (NewUpstreamModulation string, err error)

Return values:

* NewUpstreamModulation: allowed values: QPSK, 16QAM

func (*WANCableLinkConfig1) GetUpstreamPowerLevel

func (client *WANCableLinkConfig1) GetUpstreamPowerLevel() (NewUpstreamPowerLevel uint32, err error)

type WANCommonInterfaceConfig1

type WANCommonInterfaceConfig1 struct {
	goupnp.ServiceClient
}

WANCommonInterfaceConfig1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewWANCommonInterfaceConfig1Clients

func NewWANCommonInterfaceConfig1Clients() (clients []*WANCommonInterfaceConfig1, errors []error, err error)

NewWANCommonInterfaceConfig1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewWANCommonInterfaceConfig1ClientsByURL added in v1.3.1

func NewWANCommonInterfaceConfig1ClientsByURL(loc *url.URL) ([]*WANCommonInterfaceConfig1, error)

NewWANCommonInterfaceConfig1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewWANCommonInterfaceConfig1ClientsFromRootDevice added in v1.3.1

func NewWANCommonInterfaceConfig1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*WANCommonInterfaceConfig1, error)

NewWANCommonInterfaceConfig1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*WANCommonInterfaceConfig1) GetActiveConnection

func (client *WANCommonInterfaceConfig1) GetActiveConnection(NewActiveConnectionIndex uint16) (NewActiveConnDeviceContainer string, NewActiveConnectionServiceID string, err error)

func (*WANCommonInterfaceConfig1) GetCommonLinkProperties

func (client *WANCommonInterfaceConfig1) GetCommonLinkProperties() (NewWANAccessType string, NewLayer1UpstreamMaxBitRate uint32, NewLayer1DownstreamMaxBitRate uint32, NewPhysicalLinkStatus string, err error)

Return values:

* NewWANAccessType: allowed values: DSL, POTS, Cable, Ethernet

* NewPhysicalLinkStatus: allowed values: Up, Down

func (*WANCommonInterfaceConfig1) GetEnabledForInternet

func (client *WANCommonInterfaceConfig1) GetEnabledForInternet() (NewEnabledForInternet bool, err error)

func (*WANCommonInterfaceConfig1) GetMaximumActiveConnections

func (client *WANCommonInterfaceConfig1) GetMaximumActiveConnections() (NewMaximumActiveConnections uint16, err error)

Return values:

* NewMaximumActiveConnections: allowed value range: minimum=1, step=1

func (*WANCommonInterfaceConfig1) GetTotalBytesReceived

func (client *WANCommonInterfaceConfig1) GetTotalBytesReceived() (NewTotalBytesReceived uint32, err error)

func (*WANCommonInterfaceConfig1) GetTotalBytesSent

func (client *WANCommonInterfaceConfig1) GetTotalBytesSent() (NewTotalBytesSent uint32, err error)

func (*WANCommonInterfaceConfig1) GetTotalPacketsReceived

func (client *WANCommonInterfaceConfig1) GetTotalPacketsReceived() (NewTotalPacketsReceived uint32, err error)

func (*WANCommonInterfaceConfig1) GetTotalPacketsSent

func (client *WANCommonInterfaceConfig1) GetTotalPacketsSent() (NewTotalPacketsSent uint32, err error)

func (*WANCommonInterfaceConfig1) GetWANAccessProvider

func (client *WANCommonInterfaceConfig1) GetWANAccessProvider() (NewWANAccessProvider string, err error)

func (*WANCommonInterfaceConfig1) SetEnabledForInternet

func (client *WANCommonInterfaceConfig1) SetEnabledForInternet(NewEnabledForInternet bool) (err error)

type WANDSLLinkConfig1

type WANDSLLinkConfig1 struct {
	goupnp.ServiceClient
}

WANDSLLinkConfig1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:WANDSLLinkConfig:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewWANDSLLinkConfig1Clients

func NewWANDSLLinkConfig1Clients() (clients []*WANDSLLinkConfig1, errors []error, err error)

NewWANDSLLinkConfig1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewWANDSLLinkConfig1ClientsByURL added in v1.3.1

func NewWANDSLLinkConfig1ClientsByURL(loc *url.URL) ([]*WANDSLLinkConfig1, error)

NewWANDSLLinkConfig1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewWANDSLLinkConfig1ClientsFromRootDevice added in v1.3.1

func NewWANDSLLinkConfig1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*WANDSLLinkConfig1, error)

NewWANDSLLinkConfig1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*WANDSLLinkConfig1) GetATMEncapsulation

func (client *WANDSLLinkConfig1) GetATMEncapsulation() (NewATMEncapsulation string, err error)

func (*WANDSLLinkConfig1) GetAutoConfig

func (client *WANDSLLinkConfig1) GetAutoConfig() (NewAutoConfig bool, err error)

func (*WANDSLLinkConfig1) GetDSLLinkInfo

func (client *WANDSLLinkConfig1) GetDSLLinkInfo() (NewLinkType string, NewLinkStatus string, err error)

Return values:

* NewLinkStatus: allowed values: Up, Down

func (*WANDSLLinkConfig1) GetDestinationAddress

func (client *WANDSLLinkConfig1) GetDestinationAddress() (NewDestinationAddress string, err error)

func (*WANDSLLinkConfig1) GetFCSPreserved

func (client *WANDSLLinkConfig1) GetFCSPreserved() (NewFCSPreserved bool, err error)

func (*WANDSLLinkConfig1) GetModulationType

func (client *WANDSLLinkConfig1) GetModulationType() (NewModulationType string, err error)

func (*WANDSLLinkConfig1) SetATMEncapsulation

func (client *WANDSLLinkConfig1) SetATMEncapsulation(NewATMEncapsulation string) (err error)

func (*WANDSLLinkConfig1) SetDSLLinkType

func (client *WANDSLLinkConfig1) SetDSLLinkType(NewLinkType string) (err error)

func (*WANDSLLinkConfig1) SetDestinationAddress

func (client *WANDSLLinkConfig1) SetDestinationAddress(NewDestinationAddress string) (err error)

func (*WANDSLLinkConfig1) SetFCSPreserved

func (client *WANDSLLinkConfig1) SetFCSPreserved(NewFCSPreserved bool) (err error)

type WANEthernetLinkConfig1

type WANEthernetLinkConfig1 struct {
	goupnp.ServiceClient
}

WANEthernetLinkConfig1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:WANEthernetLinkConfig:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewWANEthernetLinkConfig1Clients

func NewWANEthernetLinkConfig1Clients() (clients []*WANEthernetLinkConfig1, errors []error, err error)

NewWANEthernetLinkConfig1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewWANEthernetLinkConfig1ClientsByURL added in v1.3.1

func NewWANEthernetLinkConfig1ClientsByURL(loc *url.URL) ([]*WANEthernetLinkConfig1, error)

NewWANEthernetLinkConfig1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewWANEthernetLinkConfig1ClientsFromRootDevice added in v1.3.1

func NewWANEthernetLinkConfig1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*WANEthernetLinkConfig1, error)

NewWANEthernetLinkConfig1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*WANEthernetLinkConfig1) GetEthernetLinkStatus

func (client *WANEthernetLinkConfig1) GetEthernetLinkStatus() (NewEthernetLinkStatus string, err error)

Return values:

* NewEthernetLinkStatus: allowed values: Up, Down

type WANIPConnection1

type WANIPConnection1 struct {
	goupnp.ServiceClient
}

WANIPConnection1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:WANIPConnection:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewWANIPConnection1Clients

func NewWANIPConnection1Clients() (clients []*WANIPConnection1, errors []error, err error)

NewWANIPConnection1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewWANIPConnection1ClientsByURL added in v1.3.1

func NewWANIPConnection1ClientsByURL(loc *url.URL) ([]*WANIPConnection1, error)

NewWANIPConnection1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewWANIPConnection1ClientsFromRootDevice added in v1.3.1

func NewWANIPConnection1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*WANIPConnection1, error)

NewWANIPConnection1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*WANIPConnection1) AddPortMapping

func (client *WANIPConnection1) AddPortMapping(NewRemoteHost string, NewExternalPort uint16, NewProtocol string, NewInternalPort uint16, NewInternalClient string, NewEnabled bool, NewPortMappingDescription string, NewLeaseDuration uint32) (err error)

func (*WANIPConnection1) DeletePortMapping

func (client *WANIPConnection1) DeletePortMapping(NewRemoteHost string, NewExternalPort uint16, NewProtocol string) (err error)

func (*WANIPConnection1) ForceTermination

func (client *WANIPConnection1) ForceTermination() (err error)

func (*WANIPConnection1) GetAutoDisconnectTime

func (client *WANIPConnection1) GetAutoDisconnectTime() (NewAutoDisconnectTime uint32, err error)

func (*WANIPConnection1) GetConnectionTypeInfo

func (client *WANIPConnection1) GetConnectionTypeInfo() (NewConnectionType string, NewPossibleConnectionTypes string, err error)

Return values:

* NewPossibleConnectionTypes: allowed values: Unconfigured, IP_Routed, IP_Bridged

func (*WANIPConnection1) GetExternalIPAddress

func (client *WANIPConnection1) GetExternalIPAddress() (NewExternalIPAddress string, err error)

func (*WANIPConnection1) GetGenericPortMappingEntry

func (client *WANIPConnection1) GetGenericPortMappingEntry(NewPortMappingIndex uint16) (NewRemoteHost string, NewExternalPort uint16, NewProtocol string, NewInternalPort uint16, NewInternalClient string, NewEnabled bool, NewPortMappingDescription string, NewLeaseDuration uint32, err error)

Return values:

* NewProtocol: allowed values: TCP, UDP

func (*WANIPConnection1) GetIdleDisconnectTime

func (client *WANIPConnection1) GetIdleDisconnectTime() (NewIdleDisconnectTime uint32, err error)

func (*WANIPConnection1) GetNATRSIPStatus

func (client *WANIPConnection1) GetNATRSIPStatus() (NewRSIPAvailable bool, NewNATEnabled bool, err error)

func (*WANIPConnection1) GetSpecificPortMappingEntry

func (client *WANIPConnection1) GetSpecificPortMappingEntry(NewRemoteHost string, NewExternalPort uint16, NewProtocol string) (NewInternalPort uint16, NewInternalClient string, NewEnabled bool, NewPortMappingDescription string, NewLeaseDuration uint32, err error)

func (*WANIPConnection1) GetStatusInfo

func (client *WANIPConnection1) GetStatusInfo() (NewConnectionStatus string, NewLastConnectionError string, NewUptime uint32, err error)

Return values:

* NewConnectionStatus: allowed values: Unconfigured, Connected, Disconnected

* NewLastConnectionError: allowed values: ERROR_NONE

func (*WANIPConnection1) GetWarnDisconnectDelay

func (client *WANIPConnection1) GetWarnDisconnectDelay() (NewWarnDisconnectDelay uint32, err error)

func (*WANIPConnection1) RequestConnection

func (client *WANIPConnection1) RequestConnection() (err error)

func (*WANIPConnection1) RequestTermination

func (client *WANIPConnection1) RequestTermination() (err error)

func (*WANIPConnection1) SetAutoDisconnectTime

func (client *WANIPConnection1) SetAutoDisconnectTime(NewAutoDisconnectTime uint32) (err error)

func (*WANIPConnection1) SetConnectionType

func (client *WANIPConnection1) SetConnectionType(NewConnectionType string) (err error)

func (*WANIPConnection1) SetIdleDisconnectTime

func (client *WANIPConnection1) SetIdleDisconnectTime(NewIdleDisconnectTime uint32) (err error)

func (*WANIPConnection1) SetWarnDisconnectDelay

func (client *WANIPConnection1) SetWarnDisconnectDelay(NewWarnDisconnectDelay uint32) (err error)

type WANPOTSLinkConfig1

type WANPOTSLinkConfig1 struct {
	goupnp.ServiceClient
}

WANPOTSLinkConfig1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:WANPOTSLinkConfig:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewWANPOTSLinkConfig1Clients

func NewWANPOTSLinkConfig1Clients() (clients []*WANPOTSLinkConfig1, errors []error, err error)

NewWANPOTSLinkConfig1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewWANPOTSLinkConfig1ClientsByURL added in v1.3.1

func NewWANPOTSLinkConfig1ClientsByURL(loc *url.URL) ([]*WANPOTSLinkConfig1, error)

NewWANPOTSLinkConfig1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewWANPOTSLinkConfig1ClientsFromRootDevice added in v1.3.1

func NewWANPOTSLinkConfig1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*WANPOTSLinkConfig1, error)

NewWANPOTSLinkConfig1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*WANPOTSLinkConfig1) GetCallRetryInfo

func (client *WANPOTSLinkConfig1) GetCallRetryInfo() (NewNumberOfRetries uint32, NewDelayBetweenRetries uint32, err error)

func (*WANPOTSLinkConfig1) GetDataCompression

func (client *WANPOTSLinkConfig1) GetDataCompression() (NewDataCompression string, err error)

func (*WANPOTSLinkConfig1) GetDataModulationSupported

func (client *WANPOTSLinkConfig1) GetDataModulationSupported() (NewDataModulationSupported string, err error)

func (*WANPOTSLinkConfig1) GetDataProtocol

func (client *WANPOTSLinkConfig1) GetDataProtocol() (NewDataProtocol string, err error)

func (*WANPOTSLinkConfig1) GetFclass

func (client *WANPOTSLinkConfig1) GetFclass() (NewFclass string, err error)

func (*WANPOTSLinkConfig1) GetISPInfo

func (client *WANPOTSLinkConfig1) GetISPInfo() (NewISPPhoneNumber string, NewISPInfo string, NewLinkType string, err error)

Return values:

* NewLinkType: allowed values: PPP_Dialup

func (*WANPOTSLinkConfig1) GetPlusVTRCommandSupported

func (client *WANPOTSLinkConfig1) GetPlusVTRCommandSupported() (NewPlusVTRCommandSupported bool, err error)

func (*WANPOTSLinkConfig1) SetCallRetryInfo

func (client *WANPOTSLinkConfig1) SetCallRetryInfo(NewNumberOfRetries uint32, NewDelayBetweenRetries uint32) (err error)

func (*WANPOTSLinkConfig1) SetISPInfo

func (client *WANPOTSLinkConfig1) SetISPInfo(NewISPPhoneNumber string, NewISPInfo string, NewLinkType string) (err error)

type WANPPPConnection1

type WANPPPConnection1 struct {
	goupnp.ServiceClient
}

WANPPPConnection1 is a client for UPnP SOAP service with URN "urn:schemas-upnp-org:service:WANPPPConnection:1". See goupnp.ServiceClient, which contains RootDevice and Service attributes which are provided for informational value.

func NewWANPPPConnection1Clients

func NewWANPPPConnection1Clients() (clients []*WANPPPConnection1, errors []error, err error)

NewWANPPPConnection1Clients discovers instances of the service on the network, and returns clients to any that are found. errors will contain an error for any devices that replied but which could not be queried, and err will be set if the discovery process failed outright.

This is a typical entry calling point into this package.

func NewWANPPPConnection1ClientsByURL added in v1.3.1

func NewWANPPPConnection1ClientsByURL(loc *url.URL) ([]*WANPPPConnection1, error)

NewWANPPPConnection1ClientsByURL discovers instances of the service at the given URL, and returns clients to any that are found. An error is returned if there was an error probing the service.

This is a typical entry calling point into this package when reusing an previously discovered service URL.

func NewWANPPPConnection1ClientsFromRootDevice added in v1.3.1

func NewWANPPPConnection1ClientsFromRootDevice(rootDevice *goupnp.RootDevice, loc *url.URL) ([]*WANPPPConnection1, error)

NewWANPPPConnection1ClientsFromRootDevice discovers instances of the service in a given root device, and returns clients to any that are found. An error is returned if there was not at least one instance of the service within the device. The location parameter is simply assigned to the Location attribute of the wrapped ServiceClient(s).

This is a typical entry calling point into this package when reusing an previously discovered root device.

func (*WANPPPConnection1) AddPortMapping

func (client *WANPPPConnection1) AddPortMapping(NewRemoteHost string, NewExternalPort uint16, NewProtocol string, NewInternalPort uint16, NewInternalClient string, NewEnabled bool, NewPortMappingDescription string, NewLeaseDuration uint32) (err error)

func (*WANPPPConnection1) ConfigureConnection

func (client *WANPPPConnection1) ConfigureConnection(NewUserName string, NewPassword string) (err error)

func (*WANPPPConnection1) DeletePortMapping

func (client *WANPPPConnection1) DeletePortMapping(NewRemoteHost string, NewExternalPort uint16, NewProtocol string) (err error)

func (*WANPPPConnection1) ForceTermination

func (client *WANPPPConnection1) ForceTermination() (err error)

func (*WANPPPConnection1) GetAutoDisconnectTime

func (client *WANPPPConnection1) GetAutoDisconnectTime() (NewAutoDisconnectTime uint32, err error)

func (*WANPPPConnection1) GetConnectionTypeInfo

func (client *WANPPPConnection1) GetConnectionTypeInfo() (NewConnectionType string, NewPossibleConnectionTypes string, err error)

Return values:

* NewPossibleConnectionTypes: allowed values: Unconfigured, IP_Routed, DHCP_Spoofed, PPPoE_Bridged, PPTP_Relay, L2TP_Relay, PPPoE_Relay

func (*WANPPPConnection1) GetExternalIPAddress

func (client *WANPPPConnection1) GetExternalIPAddress() (NewExternalIPAddress string, err error)

func (*WANPPPConnection1) GetGenericPortMappingEntry

func (client *WANPPPConnection1) GetGenericPortMappingEntry(NewPortMappingIndex uint16) (NewRemoteHost string, NewExternalPort uint16, NewProtocol string, NewInternalPort uint16, NewInternalClient string, NewEnabled bool, NewPortMappingDescription string, NewLeaseDuration uint32, err error)

Return values:

* NewProtocol: allowed values: TCP, UDP

func (*WANPPPConnection1) GetIdleDisconnectTime

func (client *WANPPPConnection1) GetIdleDisconnectTime() (NewIdleDisconnectTime uint32, err error)

func (*WANPPPConnection1) GetLinkLayerMaxBitRates

func (client *WANPPPConnection1) GetLinkLayerMaxBitRates() (NewUpstreamMaxBitRate uint32, NewDownstreamMaxBitRate uint32, err error)

func (*WANPPPConnection1) GetNATRSIPStatus

func (client *WANPPPConnection1) GetNATRSIPStatus() (NewRSIPAvailable bool, NewNATEnabled bool, err error)

func (*WANPPPConnection1) GetPPPAuthenticationProtocol

func (client *WANPPPConnection1) GetPPPAuthenticationProtocol() (NewPPPAuthenticationProtocol string, err error)

func (*WANPPPConnection1) GetPPPCompressionProtocol

func (client *WANPPPConnection1) GetPPPCompressionProtocol() (NewPPPCompressionProtocol string, err error)

func (*WANPPPConnection1) GetPPPEncryptionProtocol

func (client *WANPPPConnection1) GetPPPEncryptionProtocol() (NewPPPEncryptionProtocol string, err error)

func (*WANPPPConnection1) GetPassword

func (client *WANPPPConnection1) GetPassword() (NewPassword string, err error)

func (*WANPPPConnection1) GetSpecificPortMappingEntry

func (client *WANPPPConnection1) GetSpecificPortMappingEntry(NewRemoteHost string, NewExternalPort uint16, NewProtocol string) (NewInternalPort uint16, NewInternalClient string, NewEnabled bool, NewPortMappingDescription string, NewLeaseDuration uint32, err error)

func (*WANPPPConnection1) GetStatusInfo

func (client *WANPPPConnection1) GetStatusInfo() (NewConnectionStatus string, NewLastConnectionError string, NewUptime uint32, err error)

Return values:

* NewConnectionStatus: allowed values: Unconfigured, Connected, Disconnected

* NewLastConnectionError: allowed values: ERROR_NONE

func (*WANPPPConnection1) GetUserName

func (client *WANPPPConnection1) GetUserName() (NewUserName string, err error)

func (*WANPPPConnection1) GetWarnDisconnectDelay

func (client *WANPPPConnection1) GetWarnDisconnectDelay() (NewWarnDisconnectDelay uint32, err error)

func (*WANPPPConnection1) RequestConnection

func (client *WANPPPConnection1) RequestConnection() (err error)

func (*WANPPPConnection1) RequestTermination

func (client *WANPPPConnection1) RequestTermination() (err error)

func (*WANPPPConnection1) SetAutoDisconnectTime

func (client *WANPPPConnection1) SetAutoDisconnectTime(NewAutoDisconnectTime uint32) (err error)

func (*WANPPPConnection1) SetConnectionType

func (client *WANPPPConnection1) SetConnectionType(NewConnectionType string) (err error)

func (*WANPPPConnection1) SetIdleDisconnectTime

func (client *WANPPPConnection1) SetIdleDisconnectTime(NewIdleDisconnectTime uint32) (err error)

func (*WANPPPConnection1) SetWarnDisconnectDelay

func (client *WANPPPConnection1) SetWarnDisconnectDelay(NewWarnDisconnectDelay uint32) (err error)

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL