codegen

package

v0.0.0-...-8805fa6 Latest Latest Go to latest Published: Dec 4, 2020 License: BSD-3-Clause Imports: 5 Imported by: 0

Details

Valid go.mod file

The Go module system was introduced in Go 1.11 and is the official dependency management solution for Go.
Redistributable license

Redistributable licenses place minimal restrictions on how software can be used, modified, and redistributed.
Tagged version

Modules with tagged versions give importers more predictable builds.
Stable version

When a project reaches major version v1 it is considered stable.
Learn more about best practices

Repository

README ¶

// Copyright 2018 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

The codegen directory contains code generation tests for the gc
compiler.


- Introduction

The test harness compiles Go code inside files in this directory and
matches the generated assembly (the output of `go tool compile -S`)
against a set of regexps to be specified in comments that follow a
special syntax (described below). The test driver is implemented as a
step of the top-level test/run.go suite, called "asmcheck".

The codegen harness is part of the all.bash test suite, but for
performance reasons only the codegen tests for the host machine's
GOARCH are enabled by default, and only on GOOS=linux.

To perform comprehensive tests for all the supported architectures
(even on a non-Linux system), one can run the following command

  $ ../bin/go run run.go -all_codegen -v codegen

in the top-level test directory. This is recommended after any change
that affect the compiler's code.

The test harness compiles the tests with the same go toolchain that is
used to run run.go. After writing tests for a newly added codegen
transformation, it can be useful to first run the test harness with a
toolchain from a released Go version (and verify that the new tests
fail), and then re-runnig the tests using the devel toolchain.


- Regexps comments syntax

Instructions to match are specified inside plain comments that start
with an architecture tag, followed by a colon and a quoted Go-style
regexp to be matched. For example, the following test:

  func Sqrt(x float64) float64 {
  	   // amd64:"SQRTSD"
  	   // arm64:"FSQRTD"
  	   return math.Sqrt(x)
  }

verifies that math.Sqrt calls are intrinsified to a SQRTSD instruction
on amd64, and to a FSQRTD instruction on arm64.

It is possible to put multiple architectures checks into the same
line, as:

  // amd64:"SQRTSD" arm64:"FSQRTD"

although this form should be avoided when doing so would make the
regexps line excessively long and difficult to read.

Comments that are on their own line will be matched against the first
subsequent non-comment line. Inline comments are also supported; the
regexp will be matched against the code found on the same line:

  func Sqrt(x float64) float64 {
  	   return math.Sqrt(x) // arm:"SQRTD"
  }

It's possible to specify a comma-separated list of regexps to be
matched. For example, the following test:

  func TZ8(n uint8) int {
  	   // amd64:"BSFQ","ORQ\t\\$256"
  	   return bits.TrailingZeros8(n)
  }

verifies that the code generated for a bits.TrailingZeros8 call on
amd64 contains both a "BSFQ" instruction and an "ORQ $256".

Note how the ORQ regex includes a tab char (\t). In the Go assembly
syntax, operands are separated from opcodes by a tabulation.

Regexps can be quoted using either " or `. Special characters must be
escaped accordingly. Both of these are accepted, and equivalent:

  // amd64:"ADDQ\t\\$3"
  // amd64:`ADDQ\t\$3`

and they'll match this assembly line:

  ADDQ	$3

Negative matches can be specified using a - before the quoted regexp.
For example:

  func MoveSmall() {
  	   x := [...]byte{1, 2, 3, 4, 5, 6, 7}
  	   copy(x[1:], x[:]) // arm64:-".*memmove"
  }

verifies that NO memmove call is present in the assembly generated for
the copy() line.


- Architecture specifiers

There are three different ways to specify on which architecture a test
should be run:

* Specify only the architecture (eg: "amd64"). This indicates that the
  check should be run on all the supported architecture variants. For
  instance, arm checks will be run against all supported GOARM
  variations (5,6,7).
* Specify both the architecture and a variant, separated by a slash
  (eg: "arm/7"). This means that the check will be run only on that
  specific variant.
* Specify the operating system, the architecture and the variant,
  separated by slashes (eg: "plan9/386/sse2", "plan9/amd64/"). This is
  needed in the rare case that you need to do a codegen test affected
  by a specific operating system; by default, tests are compiled only
  targeting linux.


- Remarks, and Caveats

-- Write small test functions

As a general guideline, test functions should be small, to avoid
possible interactions between unrelated lines of code that may be
introduced, for example, by the compiler's optimization passes.

Any given line of Go code could get assigned more instructions than it
may appear from reading the source. In particular, matching all MOV
instructions should be avoided; the compiler may add them for
unrelated reasons and this may render the test ineffective.

-- Line matching logic

Regexps are always matched from the start of the instructions line.
This means, for example, that the "MULQ" regexp is equivalent to
"^MULQ" (^ representing the start of the line), and it will NOT match
the following assembly line:

  IMULQ	$99, AX

To force a match at any point of the line, ".*MULQ" should be used.

For the same reason, a negative regexp like -"memmove" is not enough
to make sure that no memmove call is included in the assembly. A
memmove call looks like this:

  CALL	runtime.memmove(SB)

To make sure that the "memmove" symbol does not appear anywhere in the
assembly, the negative regexp to be used is -".*memmove".

Documentation ¶

Rendered for

Index ¶

Constants
func AccessInt1(m map[int]int) int
func AccessInt2(m map[int]int) bool
func AccessString1(m map[string]int) int
func AccessString2(m map[string]int) bool
func Add(x, y, ci uint) (r, co uint)
func Add64(x, y, ci uint64) (r, co uint64)
func Add64C(x, ci uint64) (r, co uint64)
func Add64M(p, q, r *[3]uint64)
func Add64MPanicOnOverflowEQ(a, b [2]uint64) [2]uint64
func Add64MPanicOnOverflowGT(a, b [2]uint64) [2]uint64
func Add64MPanicOnOverflowNE(a, b [2]uint64) [2]uint64
func Add64PanicOnOverflowEQ(a, b uint64) uint64
func Add64PanicOnOverflowGT(a, b uint64) uint64
func Add64PanicOnOverflowNE(a, b uint64) uint64
func Add64R(x, y, ci uint64) uint64
func Add64Z(x, y uint64) (r, co uint64)
func AddC(x, ci uint) (r, co uint)
func AddM(p, q, r *[3]uint)
func AddMul(x int) int
func AddR(x, y, ci uint) uint
func AddSubFromConst(a int) int
func AddZ(x, y uint) (r, co uint)
func ArrayAdd64(a, b [4]float64) [4]float64
func ArrayCopy(a [16]byte) (b [16]byte)
func ArrayInit(i, j int) [4]int
func ArrayZero() [16]byte
func CallFunc(f func())
func CallInterface(x interface{ ... })
func CapDiv(a []int) int
func CapMod(a []int) int
func Cmp(f float64) bool
func CmpFold(x uint32) bool
func CmpLogicalToZero(a, b, c uint32, d, e uint64) uint64
func CmpMem1(p int, q *int) bool
func CmpMem2(p *int, q int) bool
func CmpMem3(p *int) bool
func CmpMem4(p *int) bool
func CmpMem5(p **int)
func CmpMem6(a []int) int
func CmpToOneU_ex1(a uint8, b uint16, c uint32, d uint64) int
func CmpToOneU_ex2(a uint8, b uint16, c uint32, d uint64) int
func CmpToZero(a, b, d int32, e, f int64) int32
func CmpToZeroU_ex1(a uint8, b uint16, c uint32, d uint64) int
func CmpToZeroU_ex2(a uint8, b uint16, c uint32, d uint64) int
func CmpToZero_ex1(a int64, e int32) int
func CmpToZero_ex2(a, b, c int64, e, f, g int32) int
func CmpToZero_ex3(a, b, c, d int64, e, f, g, h int32) int
func CmpToZero_ex4(a, b, c, d int64, e, f, g, h int32) int
func CmpToZero_ex5(e, f int32, u uint32) int
func CmpWithAdd(a float64, b float64) bool
func CmpWithSub(a float64, b float64) bool
func CmpZero1(a int32, ptr *int)
func CmpZero2(a int64, ptr *int)
func CmpZero3(a int32, ptr *int)
func CmpZero32(f float32) bool
func CmpZero4(a int64, ptr *int)
func CmpZero64(f float64) bool
func CompareArray1(a, b [2]byte) bool
func CompareArray2(a, b [3]uint16) bool
func CompareArray3(a, b [3]int16) bool
func CompareArray4(a, b [12]int8) bool
func CompareArray5(a, b [15]byte) bool
func CompareArray6(a, b unsafe.Pointer) bool
func CompareString1(s string) bool
func CompareString2(s string) bool
func CompareString3(s string) bool
func ConstDivs(n1 uint, n2 int) (uint, int)
func ConstMods(n1 uint, n2 int) (uint, int)
func ConstantLoad()
func CountRunes(s string) int
func Defer()
func Div(hi, lo, x uint) (q, r uint)
func Div32(hi, lo, x uint32) (q, r uint32)
func Div64(hi, lo, x uint64) (q, r uint64)
func Div64degenerate(x uint64) (q, r uint64)
func DivMemSrc(a []float64)
func DivPow2(f1, f2, f3 float64) (float64, float64, float64)
func Divisible(n1 uint, n2 int) (bool, bool, bool, bool)
func FloatDivs(a []float32) float32
func FusedAdd32(x, y, z float32) float32
func FusedAdd64(x, y, z float64) float64
func FusedSub32_a(x, y, z float32) float32
func FusedSub32_b(x, y, z float32) float32
func FusedSub64_a(x, y, z float64) float64
func FusedSub64_b(x, y, z float64) float64
func IndexArray(x *[10]int, i int) int
func IndexSlice(x []float64, i int) float64
func IndexString(x string, i int) byte
func Init1(p *I1)
func InitNotSmallSliceLiteral() []int
func InitSmallSliceLiteral() []int
func IterateBits(n uint) int
func IterateBits16(n uint16) int
func IterateBits32(n uint32) int
func IterateBits64(n uint64) int
func IterateBits8(n uint8) int
func KeepWanted(t *T)
func LeadingZeros(n uint) int
func LeadingZeros16(n uint16) int
func LeadingZeros32(n uint32) int
func LeadingZeros64(n uint64) int
func LeadingZeros8(n uint8) int
func Len(n uint) int
func Len16(n uint16) int
func Len32(n uint32) int
func Len64(n uint64) int
func Len8(n uint8) int
func LenDiv1(a []int) int
func LenDiv2(s string) int
func LenMod1(a []int) int
func LenMod2(s string) int
func LookupStringConversionArrayLit(m map[[2]string]int, bytes []byte) int
func LookupStringConversionKeyedArrayLit(m map[[2]string]int, bytes []byte) int
func LookupStringConversionNestedLit(m map[[1]struct{ ... }]int, bytes []byte) int
func LookupStringConversionSimple(m map[string]int, bytes []byte) int
func LookupStringConversionStructLit(m map[struct{ ... }]int, bytes []byte) int
func MULA(a, b, c uint32) (uint32, uint32, uint32)
func MULS(a, b, c uint32) (uint32, uint32, uint32)
func MapClearIndirect(m map[int]int)
func MapClearInterface(m map[interface{}]int)
func MapClearNotReflexive(m map[float64]int)
func MapClearPointer(m map[*byte]int)
func MapClearReflexive(m map[int]int)
func MapClearSideEffect(m map[int]int) int
func MergeMuls1(n int) int
func MergeMuls2(n int) int
func MergeMuls3(a, n int) int
func MergeMuls4(n int) int
func MergeMuls5(a, n int) int
func MightPanic(a []int, i, j, k, s int)
func Mul(x, y uint) (hi, lo uint)
func Mul2(f float64) float64
func Mul64(x, y uint64) (hi, lo uint64)
func MulMemSrc(a []uint32, b []float32)
func Mul_96(n int) int
func Mul_n120(n int) int
func NegAddFromConstNeg(a int) int
func NegSubFromConst(a int) int
func NoFix16A(divr int16) (int16, int16)
func NoFix16B(divd int16) (int16, int16)
func NoFix32A(divr int32) (int32, int32)
func NoFix32B(divd int32) (int32, int32)
func NoFix64A(divr int64) (int64, int64)
func NoFix64B(divd int64) (int64, int64)
func OnesCount(n uint) int
func OnesCount16(n uint16) int
func OnesCount32(n uint32) int
func OnesCount64(n uint64) int
func OnesCount8(n uint8) int
func Pow2DivisibleSigned(n1, n2 int) (bool, bool)
func Pow2Divs(n1 uint, n2 int) (uint, int)
func Pow2Mods(n1 uint, n2 int) (uint, int)
func Pow2Muls(n1, n2 int) (int, int)
func RaceMightPanic(a []int, i, j, k, s int)
func ReverseBytes(n uint) uint
func ReverseBytes16(n uint16) uint16
func ReverseBytes32(n uint32) uint32
func ReverseBytes64(n uint64) uint64
func RotateLeft16(n uint16) uint16
func RotateLeft32(n uint32) uint32
func RotateLeft64(n uint64) uint64
func RotateLeft8(n uint8) uint8
func RotateLeftVariable(n uint, m int) uint
func RotateLeftVariable32(n uint32, m int) uint32
func RotateLeftVariable64(n uint64, m int) uint64
func SliceArray(x *[10]int, i, j int) []int
func SliceClear(s []int) []int
func SliceClearPointers(s []*int) []*int
func SliceExtensionConst(s []int) []int
func SliceExtensionConstInt64(s []int) []int
func SliceExtensionConstUint(s []int) []int
func SliceExtensionConstUint64(s []int) []int
func SliceExtensionInt64(s []int, l64 int64) []int
func SliceExtensionPointer(s []*int, l int) []*int
func SliceExtensionVar(s []byte, l int) []byte
func SliceExtensionVarInt64(s []byte, l int64) []byte
func SliceExtensionVarUint(s []byte, l uint) []byte
func SliceExtensionVarUint64(s []byte, l uint64) []byte
func SliceMakeCopyConst(s []int) []int
func SliceMakeCopyConstPtr(s []*int) []*int
func SliceMakeCopyLen(s []int) []int
func SliceMakeCopyLenPtr(s []*int) []*int
func SliceMakeCopyNoMemmoveDifferentLen(s []int) []int
func SliceMakeCopyNoOptBlank(s []*int) []*int
func SliceMakeCopyNoOptCap(s []int) []int
func SliceMakeCopyNoOptCopyLength(s []*int) (int, []*int)
func SliceMakeCopyNoOptNoCap(s []*int) []*int
func SliceMakeCopyNoOptNoCopy(s []*int) []*int
func SliceMakeCopyNoOptNoDeref(s []*int) []*int
func SliceMakeCopyNoOptNoHeapAlloc(s []*int) int
func SliceMakeCopyNoOptNoMake(s []*int) []*int
func SliceMakeCopyNoOptNoVar(s []*int) []*int
func SliceMakeCopyNoOptSelfCopy(s []*int) []*int
func SliceMakeCopyNoOptTargetReference(s []*int) []*int
func SliceMakeCopyNoOptWrongAssign(s []*int) []*int
func SliceMakeCopyNoOptWrongOrder(s []*int) []*int
func SliceNilCheck(s []int)
func SliceSlice(x []float64, i, j int) []float64
func SliceString(x string, i, j int) string
func SliceWithConstCompare(a []int, b int) []int
func SliceWithSubtractBound(a []int, b int) []int
func StackStore() int
func Sub(x, y, ci uint) (r, co uint)
func Sub64(x, y, ci uint64) (r, co uint64)
func Sub64C(x, ci uint64) (r, co uint64)
func Sub64M(p, q, r *[3]uint64)
func Sub64MPanicOnOverflowEQ(a, b [2]uint64) [2]uint64
func Sub64MPanicOnOverflowGT(a, b [2]uint64) [2]uint64
func Sub64MPanicOnOverflowNE(a, b [2]uint64) [2]uint64
func Sub64PanicOnOverflowEQ(a, b uint64) uint64
func Sub64PanicOnOverflowGT(a, b uint64) uint64
func Sub64PanicOnOverflowNE(a, b uint64) uint64
func Sub64R(x, y, ci uint64) uint64
func Sub64Z(x, y uint64) (r, co uint64)
func SubC(x, ci uint) (r, co uint)
func SubFromConst(a int) int
func SubFromConstNeg(a int) int
func SubFromLen64(n uint64) int
func SubM(p, q, r *[3]uint)
func SubMem(arr []int, b, c, d int) int
func SubR(x, y, ci uint) uint
func SubSubFromConst(a int) int
func SubZ(x, y uint) (r, co uint)
func ToByteSlice() []byte
func TrailingZeros(n uint) int
func TrailingZeros16(n uint16) int
func TrailingZeros32(n uint32) int
func TrailingZeros64(n uint64) int
func TrailingZeros64Subtract(n uint64) int
func TrailingZeros8(n uint8) int
func UintGeqOne(a uint8, b uint16, c uint32, d uint64) int
func UintGeqZero(a uint8, b uint16, c uint32, d uint64) int
func UintGtZero(a uint8, b uint16, c uint32, d uint64) int
func UintLeqZero(a uint8, b uint16, c uint32, d uint64) int
func UintLtOne(a uint8, b uint16, c uint32, d uint64) int
func UintLtZero(a uint8, b uint16, c uint32, d uint64) int
func Zero1(t *Z1)
func Zero2(t *Z2)
func ZeroLargeStruct(x *T)
type I
type I1
type T
type Z1
type Z2

Constants ¶

View Source

const (
	A = 7777777777777777
	B = 8888888888888888
)

Variables ¶

This section is empty.

Functions ¶

func AccessInt1 ¶

func AccessInt1(m map[int]int) int

func AccessInt2 ¶

func AccessInt2(m map[int]int) bool

func AccessString1 ¶

func AccessString1(m map[string]int) int

func AccessString2 ¶

func AccessString2(m map[string]int) bool

func Add ¶

func Add(x, y, ci uint) (r, co uint)

func Add64 ¶

func Add64(x, y, ci uint64) (r, co uint64)

func Add64C ¶

func Add64C(x, ci uint64) (r, co uint64)

func Add64M ¶

func Add64M(p, q, r *[3]uint64)

func Add64MPanicOnOverflowEQ ¶

func Add64MPanicOnOverflowEQ(a, b [2]uint64) [2]uint64

func Add64MPanicOnOverflowGT ¶

func Add64MPanicOnOverflowGT(a, b [2]uint64) [2]uint64

func Add64MPanicOnOverflowNE ¶

func Add64MPanicOnOverflowNE(a, b [2]uint64) [2]uint64

func Add64PanicOnOverflowEQ ¶

func Add64PanicOnOverflowEQ(a, b uint64) uint64

func Add64PanicOnOverflowGT ¶

func Add64PanicOnOverflowGT(a, b uint64) uint64

func Add64PanicOnOverflowNE ¶

func Add64PanicOnOverflowNE(a, b uint64) uint64

func Add64R ¶

func Add64R(x, y, ci uint64) uint64

func Add64Z ¶

func Add64Z(x, y uint64) (r, co uint64)

func AddC ¶

func AddC(x, ci uint) (r, co uint)

func AddM ¶

func AddM(p, q, r *[3]uint)

func AddMul ¶

func AddMul(x int) int

func AddR ¶

func AddR(x, y, ci uint) uint

func AddSubFromConst ¶

func AddSubFromConst(a int) int

func AddZ ¶

func AddZ(x, y uint) (r, co uint)

func ArrayAdd64 ¶

func ArrayAdd64(a, b [4]float64) [4]float64

Notes: - 386 fails due to spilling a register - arm & mips fail due to softfloat calls amd64:"TEXT\t.*, [$]0-" arm64:"TEXT\t.*, [$]0-" ppc64:"TEXT\t.*, [$]0-" ppc64le:"TEXT\t.*, [$]0-" s390x:"TEXT\t.*, [$]0-"

func ArrayCopy ¶

func ArrayCopy(a [16]byte) (b [16]byte)

func ArrayInit ¶

func ArrayInit(i, j int) [4]int

386:"TEXT\t.*, [$]0-" amd64:"TEXT\t.*, [$]0-" arm:"TEXT\t.*, [$]0-" (spills return address) arm64:"TEXT\t.*, [$]0-" mips:"TEXT\t.*, [$]-4-" ppc64:"TEXT\t.*, [$]0-" ppc64le:"TEXT\t.*, [$]0-" s390x:"TEXT\t.*, [$]0-"

func ArrayZero ¶

func ArrayZero() [16]byte

func CallFunc ¶

func CallFunc(f func())

func CallInterface ¶

func CallInterface(x interface{ M() })

func CapDiv ¶

func CapDiv(a []int) int

func CapMod ¶

func CapMod(a []int) int

func Cmp ¶

func Cmp(f float64) bool

func CmpFold ¶

func CmpFold(x uint32) bool

func CmpLogicalToZero ¶

func CmpLogicalToZero(a, b, c uint32, d, e uint64) uint64

func CmpMem1 ¶

func CmpMem1(p int, q *int) bool

func CmpMem2 ¶

func CmpMem2(p *int, q int) bool

func CmpMem3 ¶

func CmpMem3(p *int) bool

func CmpMem4 ¶

func CmpMem4(p *int) bool

func CmpMem5 ¶

func CmpMem5(p **int)

func CmpMem6 ¶

func CmpMem6(a []int) int

func CmpToOneU_ex1 ¶

func CmpToOneU_ex1(a uint8, b uint16, c uint32, d uint64) int

func CmpToOneU_ex2 ¶

func CmpToOneU_ex2(a uint8, b uint16, c uint32, d uint64) int

func CmpToZero ¶

func CmpToZero(a, b, d int32, e, f int64) int32

func CmpToZeroU_ex1 ¶

func CmpToZeroU_ex1(a uint8, b uint16, c uint32, d uint64) int

func CmpToZeroU_ex2 ¶

func CmpToZeroU_ex2(a uint8, b uint16, c uint32, d uint64) int

func CmpToZero_ex1 ¶

func CmpToZero_ex1(a int64, e int32) int

var + const 'x-const' might be canonicalized to 'x+(-const)', so we check both CMN and CMP for subtraction expressions to make the pattern robust.

func CmpToZero_ex2 ¶

func CmpToZero_ex2(a, b, c int64, e, f, g int32) int

var + var TODO: optimize 'var - var'

func CmpToZero_ex3 ¶

func CmpToZero_ex3(a, b, c, d int64, e, f, g, h int32) int

var + var*var

func CmpToZero_ex4 ¶

func CmpToZero_ex4(a, b, c, d int64, e, f, g, h int32) int

var - var*var

func CmpToZero_ex5 ¶

func CmpToZero_ex5(e, f int32, u uint32) int

func CmpWithAdd ¶

func CmpWithAdd(a float64, b float64) bool

func CmpWithSub ¶

func CmpWithSub(a float64, b float64) bool

func CmpZero1 ¶

func CmpZero1(a int32, ptr *int)

func CmpZero2 ¶

func CmpZero2(a int64, ptr *int)

func CmpZero3 ¶

func CmpZero3(a int32, ptr *int)

func CmpZero32 ¶

func CmpZero32(f float32) bool

func CmpZero4 ¶

func CmpZero4(a int64, ptr *int)

func CmpZero64 ¶

func CmpZero64(f float64) bool

func CompareArray1 ¶

func CompareArray1(a, b [2]byte) bool

func CompareArray2 ¶

func CompareArray2(a, b [3]uint16) bool

func CompareArray3 ¶

func CompareArray3(a, b [3]int16) bool

func CompareArray4 ¶

func CompareArray4(a, b [12]int8) bool

func CompareArray5 ¶

func CompareArray5(a, b [15]byte) bool

func CompareArray6 ¶

func CompareArray6(a, b unsafe.Pointer) bool

This was a TODO in mapaccess1_faststr

func CompareString1 ¶

func CompareString1(s string) bool

func CompareString2 ¶

func CompareString2(s string) bool

func CompareString3 ¶

func CompareString3(s string) bool

func ConstDivs ¶

func ConstDivs(n1 uint, n2 int) (uint, int)

Check that constant divisions get turned into MULs

func ConstMods ¶

func ConstMods(n1 uint, n2 int) (uint, int)

Check that constant modulo divs get turned into MULs

func ConstantLoad ¶

func ConstantLoad()

Loading from read-only symbols should get transformed into constants.

func CountRunes ¶

func CountRunes(s string) int

func Defer ¶

func Defer()

Put a defer in a loop, so second defer is not open-coded

func Div ¶

func Div(hi, lo, x uint) (q, r uint)

func Div32 ¶

func Div32(hi, lo, x uint32) (q, r uint32)

func Div64 ¶

func Div64(hi, lo, x uint64) (q, r uint64)

func Div64degenerate ¶

func Div64degenerate(x uint64) (q, r uint64)

func DivMemSrc ¶

func DivMemSrc(a []float64)

func DivPow2 ¶

func DivPow2(f1, f2, f3 float64) (float64, float64, float64)

func Divisible ¶

func Divisible(n1 uint, n2 int) (bool, bool, bool, bool)

Check that divisibility checks x%c==0 are converted to MULs and rotates

func FloatDivs ¶

func FloatDivs(a []float32) float32

func FusedAdd32 ¶

func FusedAdd32(x, y, z float32) float32

func FusedAdd64 ¶

func FusedAdd64(x, y, z float64) float64

func FusedSub32_a ¶

func FusedSub32_a(x, y, z float32) float32

func FusedSub32_b ¶

func FusedSub32_b(x, y, z float32) float32

func FusedSub64_a ¶

func FusedSub64_a(x, y, z float64) float64

func FusedSub64_b ¶

func FusedSub64_b(x, y, z float64) float64

func IndexArray ¶

func IndexArray(x *[10]int, i int) int

func IndexSlice ¶

func IndexSlice(x []float64, i int) float64

func IndexString ¶

func IndexString(x string, i int) byte

func Init1 ¶

func Init1(p *I1)

func InitNotSmallSliceLiteral ¶

func InitNotSmallSliceLiteral() []int

func InitSmallSliceLiteral ¶

func InitSmallSliceLiteral() []int

---------------------- //

Init slice literal   //

---------------------- // See issue 21561

func IterateBits ¶

func IterateBits(n uint) int

func IterateBits16 ¶

func IterateBits16(n uint16) int

func IterateBits32 ¶

func IterateBits32(n uint32) int

func IterateBits64 ¶

func IterateBits64(n uint64) int

func IterateBits8 ¶

func IterateBits8(n uint8) int

func KeepWanted ¶

func KeepWanted(t *T)

Notes: - 386 fails due to spilling a register amd64:"TEXT\t.*, [$]0-" arm:"TEXT\t.*, [$]0-" (spills return address) arm64:"TEXT\t.*, [$]0-" ppc64:"TEXT\t.*, [$]0-" ppc64le:"TEXT\t.*, [$]0-" s390x:"TEXT\t.*, [$]0-" Note: that 386 currently has to spill a register.

func LeadingZeros ¶

func LeadingZeros(n uint) int

func LeadingZeros16 ¶

func LeadingZeros16(n uint16) int

func LeadingZeros32 ¶

func LeadingZeros32(n uint32) int

func LeadingZeros64 ¶

func LeadingZeros64(n uint64) int

func LeadingZeros8 ¶

func LeadingZeros8(n uint8) int

func Len ¶

func Len(n uint) int

func Len16 ¶

func Len16(n uint16) int

func Len32 ¶

func Len32(n uint32) int

func Len64 ¶

func Len64(n uint64) int

func Len8 ¶

func Len8(n uint8) int

func LenDiv1 ¶

func LenDiv1(a []int) int

func LenDiv2 ¶

func LenDiv2(s string) int

func LenMod1 ¶

func LenMod1(a []int) int

func LenMod2 ¶

func LenMod2(s string) int

func LookupStringConversionArrayLit ¶

func LookupStringConversionArrayLit(m map[[2]string]int, bytes []byte) int

func LookupStringConversionKeyedArrayLit ¶

func LookupStringConversionKeyedArrayLit(m map[[2]string]int, bytes []byte) int

func LookupStringConversionNestedLit ¶

func LookupStringConversionNestedLit(m map[[1]struct{ s [1]string }]int, bytes []byte) int

func LookupStringConversionSimple ¶

func LookupStringConversionSimple(m map[string]int, bytes []byte) int

func LookupStringConversionStructLit ¶

func LookupStringConversionStructLit(m map[struct{ string }]int, bytes []byte) int

func MULA ¶

func MULA(a, b, c uint32) (uint32, uint32, uint32)

func MULS ¶

func MULS(a, b, c uint32) (uint32, uint32, uint32)

func MapClearIndirect ¶

func MapClearIndirect(m map[int]int)

func MapClearInterface ¶

func MapClearInterface(m map[interface{}]int)

func MapClearNotReflexive ¶

func MapClearNotReflexive(m map[float64]int)

func MapClearPointer ¶

func MapClearPointer(m map[*byte]int)

func MapClearReflexive ¶

func MapClearReflexive(m map[int]int)

func MapClearSideEffect ¶

func MapClearSideEffect(m map[int]int) int

func MergeMuls1 ¶

func MergeMuls1(n int) int

func MergeMuls2 ¶

func MergeMuls2(n int) int

func MergeMuls3 ¶

func MergeMuls3(a, n int) int

func MergeMuls4 ¶

func MergeMuls4(n int) int

func MergeMuls5 ¶

func MergeMuls5(a, n int) int

func MightPanic ¶

func MightPanic(a []int, i, j, k, s int)

Check that simple functions get promoted to nosplit, even when they might panic in various ways. See issue 31219. amd64:"TEXT\t.*NOSPLIT.*"

func Mul ¶

func Mul(x, y uint) (hi, lo uint)

func Mul2 ¶

func Mul2(f float64) float64

func Mul64 ¶

func Mul64(x, y uint64) (hi, lo uint64)

func MulMemSrc ¶

func MulMemSrc(a []uint32, b []float32)

func Mul_96 ¶

func Mul_96(n int) int

func Mul_n120 ¶

func Mul_n120(n int) int

func NegAddFromConstNeg ¶

func NegAddFromConstNeg(a int) int

func NegSubFromConst ¶

func NegSubFromConst(a int) int

func NoFix16A ¶

func NoFix16A(divr int16) (int16, int16)

func NoFix16B ¶

func NoFix16B(divd int16) (int16, int16)

func NoFix32A ¶

func NoFix32A(divr int32) (int32, int32)

func NoFix32B ¶

func NoFix32B(divd int32) (int32, int32)

func NoFix64A ¶

func NoFix64A(divr int64) (int64, int64)

Check that fix-up code is not generated for divisions where it has been proven that that the divisor is not -1 or that the dividend is > MinIntNN.

func NoFix64B ¶

func NoFix64B(divd int64) (int64, int64)

func OnesCount ¶

func OnesCount(n uint) int

amd64:".*x86HasPOPCNT"

func OnesCount16 ¶

func OnesCount16(n uint16) int

amd64:".*x86HasPOPCNT"

func OnesCount32 ¶

func OnesCount32(n uint32) int

amd64:".*x86HasPOPCNT"

func OnesCount64 ¶

func OnesCount64(n uint64) int

amd64:".*x86HasPOPCNT"

func OnesCount8 ¶

func OnesCount8(n uint8) int

func Pow2DivisibleSigned ¶

func Pow2DivisibleSigned(n1, n2 int) (bool, bool)

Check that signed divisibility checks get converted to AND on low bits

func Pow2Divs ¶

func Pow2Divs(n1 uint, n2 int) (uint, int)

func Pow2Mods ¶

func Pow2Mods(n1 uint, n2 int) (uint, int)

func Pow2Muls ¶

func Pow2Muls(n1, n2 int) (int, int)

func RaceMightPanic ¶

func RaceMightPanic(a []int, i, j, k, s int)

Check that we elide racefuncenter/racefuncexit for functions with no calls (but which might panic in various ways). See issue 31219. amd64:-"CALL.*racefuncenter.*" arm64:-"CALL.*racefuncenter.*" ppc64le:-"CALL.*racefuncenter.*"

func ReverseBytes ¶

func ReverseBytes(n uint) uint

func ReverseBytes16 ¶

func ReverseBytes16(n uint16) uint16

func ReverseBytes32 ¶

func ReverseBytes32(n uint32) uint32

func ReverseBytes64 ¶

func ReverseBytes64(n uint64) uint64

func RotateLeft16 ¶

func RotateLeft16(n uint16) uint16

func RotateLeft32 ¶

func RotateLeft32(n uint32) uint32

func RotateLeft64 ¶

func RotateLeft64(n uint64) uint64

func RotateLeft8 ¶

func RotateLeft8(n uint8) uint8

func RotateLeftVariable ¶

func RotateLeftVariable(n uint, m int) uint

func RotateLeftVariable32 ¶

func RotateLeftVariable32(n uint32, m int) uint32

func RotateLeftVariable64 ¶

func RotateLeftVariable64(n uint64, m int) uint64

func SliceArray ¶

func SliceArray(x *[10]int, i, j int) []int

func SliceClear ¶

func SliceClear(s []int) []int

func SliceClearPointers ¶

func SliceClearPointers(s []*int) []*int

func SliceExtensionConst ¶

func SliceExtensionConst(s []int) []int

func SliceExtensionConstInt64 ¶

func SliceExtensionConstInt64(s []int) []int

func SliceExtensionConstUint ¶

func SliceExtensionConstUint(s []int) []int

func SliceExtensionConstUint64 ¶

func SliceExtensionConstUint64(s []int) []int

func SliceExtensionInt64 ¶

func SliceExtensionInt64(s []int, l64 int64) []int

func SliceExtensionPointer ¶

func SliceExtensionPointer(s []*int, l int) []*int

func SliceExtensionVar ¶

func SliceExtensionVar(s []byte, l int) []byte

func SliceExtensionVarInt64 ¶

func SliceExtensionVarInt64(s []byte, l int64) []byte

func SliceExtensionVarUint ¶

func SliceExtensionVarUint(s []byte, l uint) []byte

func SliceExtensionVarUint64 ¶

func SliceExtensionVarUint64(s []byte, l uint64) []byte

func SliceMakeCopyConst ¶

func SliceMakeCopyConst(s []int) []int

func SliceMakeCopyConstPtr ¶

func SliceMakeCopyConstPtr(s []*int) []*int

func SliceMakeCopyLen ¶

func SliceMakeCopyLen(s []int) []int

func SliceMakeCopyLenPtr ¶

func SliceMakeCopyLenPtr(s []*int) []*int

func SliceMakeCopyNoMemmoveDifferentLen ¶

func SliceMakeCopyNoMemmoveDifferentLen(s []int) []int

func SliceMakeCopyNoOptBlank ¶

func SliceMakeCopyNoOptBlank(s []*int) []*int

func SliceMakeCopyNoOptCap ¶

func SliceMakeCopyNoOptCap(s []int) []int

func SliceMakeCopyNoOptCopyLength ¶

func SliceMakeCopyNoOptCopyLength(s []*int) (int, []*int)

func SliceMakeCopyNoOptNoCap ¶

func SliceMakeCopyNoOptNoCap(s []*int) []*int

func SliceMakeCopyNoOptNoCopy ¶

func SliceMakeCopyNoOptNoCopy(s []*int) []*int

func SliceMakeCopyNoOptNoDeref ¶

func SliceMakeCopyNoOptNoDeref(s []*int) []*int

func SliceMakeCopyNoOptNoHeapAlloc ¶

func SliceMakeCopyNoOptNoHeapAlloc(s []*int) int

func SliceMakeCopyNoOptNoMake ¶

func SliceMakeCopyNoOptNoMake(s []*int) []*int

func SliceMakeCopyNoOptNoVar ¶

func SliceMakeCopyNoOptNoVar(s []*int) []*int

func SliceMakeCopyNoOptSelfCopy ¶

func SliceMakeCopyNoOptSelfCopy(s []*int) []*int

func SliceMakeCopyNoOptTargetReference ¶

func SliceMakeCopyNoOptTargetReference(s []*int) []*int

func SliceMakeCopyNoOptWrongAssign ¶

func SliceMakeCopyNoOptWrongAssign(s []*int) []*int

func SliceMakeCopyNoOptWrongOrder ¶

func SliceMakeCopyNoOptWrongOrder(s []*int) []*int

func SliceNilCheck ¶

func SliceNilCheck(s []int)

---------------------- //

Nil check of &s[0]   //

---------------------- // See issue 30366

func SliceSlice ¶

func SliceSlice(x []float64, i, j int) []float64

func SliceString ¶

func SliceString(x string, i, j int) string

func SliceWithConstCompare ¶

func SliceWithConstCompare(a []int, b int) []int

func SliceWithSubtractBound ¶

func SliceWithSubtractBound(a []int, b int) []int

func StackStore ¶

func StackStore() int

386:"TEXT\t.*, [$]0-" amd64:"TEXT\t.*, [$]0-" arm:"TEXT\t.*, [$]-4-" arm64:"TEXT\t.*, [$]0-" mips:"TEXT\t.*, [$]-4-" ppc64:"TEXT\t.*, [$]0-" ppc64le:"TEXT\t.*, [$]0-" s390x:"TEXT\t.*, [$]0-"

func Sub ¶

func Sub(x, y, ci uint) (r, co uint)

func Sub64 ¶

func Sub64(x, y, ci uint64) (r, co uint64)

func Sub64C ¶

func Sub64C(x, ci uint64) (r, co uint64)

func Sub64M ¶

func Sub64M(p, q, r *[3]uint64)

func Sub64MPanicOnOverflowEQ ¶

func Sub64MPanicOnOverflowEQ(a, b [2]uint64) [2]uint64

func Sub64MPanicOnOverflowGT ¶

func Sub64MPanicOnOverflowGT(a, b [2]uint64) [2]uint64

func Sub64MPanicOnOverflowNE ¶

func Sub64MPanicOnOverflowNE(a, b [2]uint64) [2]uint64

func Sub64PanicOnOverflowEQ ¶

func Sub64PanicOnOverflowEQ(a, b uint64) uint64

func Sub64PanicOnOverflowGT ¶

func Sub64PanicOnOverflowGT(a, b uint64) uint64

func Sub64PanicOnOverflowNE ¶

func Sub64PanicOnOverflowNE(a, b uint64) uint64

func Sub64R ¶

func Sub64R(x, y, ci uint64) uint64

func Sub64Z ¶

func Sub64Z(x, y uint64) (r, co uint64)

func SubC ¶

func SubC(x, ci uint) (r, co uint)

func SubFromConst ¶

func SubFromConst(a int) int

func SubFromConstNeg ¶

func SubFromConstNeg(a int) int

func SubFromLen64 ¶

func SubFromLen64(n uint64) int

func SubM ¶

func SubM(p, q, r *[3]uint)

func SubMem ¶

func SubMem(arr []int, b, c, d int) int

func SubR ¶

func SubR(x, y, ci uint) uint

func SubSubFromConst ¶

func SubSubFromConst(a int) int

func SubZ ¶

func SubZ(x, y uint) (r, co uint)

func ToByteSlice ¶

func ToByteSlice() []byte

func TrailingZeros ¶

func TrailingZeros(n uint) int

func TrailingZeros16 ¶

func TrailingZeros16(n uint16) int

func TrailingZeros32 ¶

func TrailingZeros32(n uint32) int

func TrailingZeros64 ¶

func TrailingZeros64(n uint64) int

func TrailingZeros64Subtract ¶

func TrailingZeros64Subtract(n uint64) int

func TrailingZeros8 ¶

func TrailingZeros8(n uint8) int

func UintGeqOne ¶

func UintGeqOne(a uint8, b uint16, c uint32, d uint64) int

func UintGeqZero ¶

func UintGeqZero(a uint8, b uint16, c uint32, d uint64) int

func UintGtZero ¶

func UintGtZero(a uint8, b uint16, c uint32, d uint64) int

func UintLeqZero ¶

func UintLeqZero(a uint8, b uint16, c uint32, d uint64) int

func UintLtOne ¶

func UintLtOne(a uint8, b uint16, c uint32, d uint64) int

func UintLtZero ¶

func UintLtZero(a uint8, b uint16, c uint32, d uint64) int

func Zero1 ¶

func Zero1(t *Z1)

func Zero2 ¶

func Zero2(t *Z2)

func ZeroLargeStruct ¶

func ZeroLargeStruct(x *T)

386:"TEXT\t.*, [$]0-" amd64:"TEXT\t.*, [$]0-" arm:"TEXT\t.*, [$]0-" (spills return address) arm64:"TEXT\t.*, [$]0-" mips:"TEXT\t.*, [$]-4-" ppc64:"TEXT\t.*, [$]0-" ppc64le:"TEXT\t.*, [$]0-" s390x:"TEXT\t.*, [$]0-"

Types ¶

type I ¶

type I interface {
	// contains filtered or unexported methods
}

type I1 ¶

type I1 struct {
	// contains filtered or unexported fields
}

type T ¶

type T struct {
	A, B, C, D int // keep exported fields
	// contains filtered or unexported fields
}

type Z1 ¶

type Z1 struct {
	// contains filtered or unexported fields
}

type Z2 ¶

type Z2 struct {
	// contains filtered or unexported fields
}

Source Files ¶

View all Source files

?	: This menu
/	: Search site
f or F	: Jump to
y or Y	: Canonical URL