vtgate

package
v2.1.1+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 22, 2017 License: BSD-3-Clause Imports: 6 Imported by: 0

Documentation

Overview

Package vtgate is a generated protocol buffer package.

It is generated from these files:

vtgate.proto

It has these top-level messages:

Session
ExecuteRequest
ExecuteResponse
ExecuteShardsRequest
ExecuteShardsResponse
ExecuteKeyspaceIdsRequest
ExecuteKeyspaceIdsResponse
ExecuteKeyRangesRequest
ExecuteKeyRangesResponse
ExecuteEntityIdsRequest
ExecuteEntityIdsResponse
ExecuteBatchRequest
ExecuteBatchResponse
BoundShardQuery
ExecuteBatchShardsRequest
ExecuteBatchShardsResponse
BoundKeyspaceIdQuery
ExecuteBatchKeyspaceIdsRequest
ExecuteBatchKeyspaceIdsResponse
StreamExecuteRequest
StreamExecuteResponse
StreamExecuteShardsRequest
StreamExecuteShardsResponse
StreamExecuteKeyspaceIdsRequest
StreamExecuteKeyspaceIdsResponse
StreamExecuteKeyRangesRequest
StreamExecuteKeyRangesResponse
BeginRequest
BeginResponse
CommitRequest
CommitResponse
RollbackRequest
RollbackResponse
ResolveTransactionRequest
MessageStreamRequest
MessageAckRequest
ResolveTransactionResponse
SplitQueryRequest
SplitQueryResponse
GetSrvKeyspaceRequest
GetSrvKeyspaceResponse
UpdateStreamRequest
UpdateStreamResponse

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type BeginRequest

type BeginRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// single_db specifies if the transaction should be restricted
	// to a single database.
	SingleDb bool `protobuf:"varint,2,opt,name=single_db,json=singleDb" json:"single_db,omitempty"`
}

BeginRequest is the payload to Begin.

func (*BeginRequest) Descriptor

func (*BeginRequest) Descriptor() ([]byte, []int)

func (*BeginRequest) GetCallerId

func (m *BeginRequest) GetCallerId() *vtrpc.CallerID

func (*BeginRequest) GetSingleDb

func (m *BeginRequest) GetSingleDb() bool

func (*BeginRequest) ProtoMessage

func (*BeginRequest) ProtoMessage()

func (*BeginRequest) Reset

func (m *BeginRequest) Reset()

func (*BeginRequest) String

func (m *BeginRequest) String() string

type BeginResponse

type BeginResponse struct {
	// session is the initial session information to use for subsequent queries.
	Session *Session `protobuf:"bytes,1,opt,name=session" json:"session,omitempty"`
}

BeginResponse is the returned value from Begin.

func (*BeginResponse) Descriptor

func (*BeginResponse) Descriptor() ([]byte, []int)

func (*BeginResponse) GetSession

func (m *BeginResponse) GetSession() *Session

func (*BeginResponse) ProtoMessage

func (*BeginResponse) ProtoMessage()

func (*BeginResponse) Reset

func (m *BeginResponse) Reset()

func (*BeginResponse) String

func (m *BeginResponse) String() string

type BoundKeyspaceIdQuery

type BoundKeyspaceIdQuery struct {
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,1,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,2,opt,name=keyspace" json:"keyspace,omitempty"`
	// keyspace_ids contains the list of keyspace_ids affected by this query.
	// Will be used to find the shards to send the query to.
	KeyspaceIds [][]byte `protobuf:"bytes,3,rep,name=keyspace_ids,json=keyspaceIds,proto3" json:"keyspace_ids,omitempty"`
}

BoundKeyspaceIdQuery represents a single query request for the specified list of keyspace ids. This is used in a list for ExecuteBatchKeyspaceIdsRequest.

func (*BoundKeyspaceIdQuery) Descriptor

func (*BoundKeyspaceIdQuery) Descriptor() ([]byte, []int)

func (*BoundKeyspaceIdQuery) GetKeyspace

func (m *BoundKeyspaceIdQuery) GetKeyspace() string

func (*BoundKeyspaceIdQuery) GetKeyspaceIds

func (m *BoundKeyspaceIdQuery) GetKeyspaceIds() [][]byte

func (*BoundKeyspaceIdQuery) GetQuery

func (m *BoundKeyspaceIdQuery) GetQuery() *query.BoundQuery

func (*BoundKeyspaceIdQuery) ProtoMessage

func (*BoundKeyspaceIdQuery) ProtoMessage()

func (*BoundKeyspaceIdQuery) Reset

func (m *BoundKeyspaceIdQuery) Reset()

func (*BoundKeyspaceIdQuery) String

func (m *BoundKeyspaceIdQuery) String() string

type BoundShardQuery

type BoundShardQuery struct {
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,1,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,2,opt,name=keyspace" json:"keyspace,omitempty"`
	// shards to target the query to. A DML can only target one shard.
	Shards []string `protobuf:"bytes,3,rep,name=shards" json:"shards,omitempty"`
}

BoundShardQuery represents a single query request for the specified list of shards. This is used in a list for ExecuteBatchShardsRequest.

func (*BoundShardQuery) Descriptor

func (*BoundShardQuery) Descriptor() ([]byte, []int)

func (*BoundShardQuery) GetKeyspace

func (m *BoundShardQuery) GetKeyspace() string

func (*BoundShardQuery) GetQuery

func (m *BoundShardQuery) GetQuery() *query.BoundQuery

func (*BoundShardQuery) GetShards

func (m *BoundShardQuery) GetShards() []string

func (*BoundShardQuery) ProtoMessage

func (*BoundShardQuery) ProtoMessage()

func (*BoundShardQuery) Reset

func (m *BoundShardQuery) Reset()

func (*BoundShardQuery) String

func (m *BoundShardQuery) String() string

type CommitRequest

type CommitRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data to commit.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// atomic specifies if the commit should go through the
	// 2PC workflow to ensure atomicity.
	Atomic bool `protobuf:"varint,3,opt,name=atomic" json:"atomic,omitempty"`
}

CommitRequest is the payload to Commit.

func (*CommitRequest) Descriptor

func (*CommitRequest) Descriptor() ([]byte, []int)

func (*CommitRequest) GetAtomic

func (m *CommitRequest) GetAtomic() bool

func (*CommitRequest) GetCallerId

func (m *CommitRequest) GetCallerId() *vtrpc.CallerID

func (*CommitRequest) GetSession

func (m *CommitRequest) GetSession() *Session

func (*CommitRequest) ProtoMessage

func (*CommitRequest) ProtoMessage()

func (*CommitRequest) Reset

func (m *CommitRequest) Reset()

func (*CommitRequest) String

func (m *CommitRequest) String() string

type CommitResponse

type CommitResponse struct {
}

CommitResponse is the returned value from Commit.

func (*CommitResponse) Descriptor

func (*CommitResponse) Descriptor() ([]byte, []int)

func (*CommitResponse) ProtoMessage

func (*CommitResponse) ProtoMessage()

func (*CommitResponse) Reset

func (m *CommitResponse) Reset()

func (*CommitResponse) String

func (m *CommitResponse) String() string

type ExecuteBatchKeyspaceIdsRequest

type ExecuteBatchKeyspaceIdsRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data. It is returned by Begin.
	// Do not fill it in if outside of a transaction.
	Session *Session                `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	Queries []*BoundKeyspaceIdQuery `protobuf:"bytes,3,rep,name=queries" json:"queries,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,4,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// as_transaction will execute the queries in this batch in a single transaction per shard, created for this purpose.
	// (this can be seen as adding a 'begin' before and 'commit' after the queries).
	// Only makes sense if tablet_type is master. If set, the Session is ignored.
	AsTransaction bool `protobuf:"varint,5,opt,name=as_transaction,json=asTransaction" json:"as_transaction,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,6,opt,name=options" json:"options,omitempty"`
}

ExecuteBatchKeyspaceIdsRequest is the payload to ExecuteBatchKeyspaceId.

func (*ExecuteBatchKeyspaceIdsRequest) Descriptor

func (*ExecuteBatchKeyspaceIdsRequest) Descriptor() ([]byte, []int)

func (*ExecuteBatchKeyspaceIdsRequest) GetAsTransaction

func (m *ExecuteBatchKeyspaceIdsRequest) GetAsTransaction() bool

func (*ExecuteBatchKeyspaceIdsRequest) GetCallerId

func (m *ExecuteBatchKeyspaceIdsRequest) GetCallerId() *vtrpc.CallerID

func (*ExecuteBatchKeyspaceIdsRequest) GetOptions

func (*ExecuteBatchKeyspaceIdsRequest) GetQueries

func (*ExecuteBatchKeyspaceIdsRequest) GetSession

func (m *ExecuteBatchKeyspaceIdsRequest) GetSession() *Session

func (*ExecuteBatchKeyspaceIdsRequest) GetTabletType

func (*ExecuteBatchKeyspaceIdsRequest) ProtoMessage

func (*ExecuteBatchKeyspaceIdsRequest) ProtoMessage()

func (*ExecuteBatchKeyspaceIdsRequest) Reset

func (m *ExecuteBatchKeyspaceIdsRequest) Reset()

func (*ExecuteBatchKeyspaceIdsRequest) String

type ExecuteBatchKeyspaceIdsResponse

type ExecuteBatchKeyspaceIdsResponse struct {
	// error contains an application level error if necessary. Note the
	// session may have changed, even when an error is returned (for
	// instance if a database integrity error happened).
	Error *vtrpc.RPCError `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
	// session is the updated session information (only returned inside a transaction).
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// result contains the query result, only set if error is unset.
	Results []*query.QueryResult `protobuf:"bytes,3,rep,name=results" json:"results,omitempty"`
}

ExecuteBatchKeyspaceIdsResponse is the returned value from ExecuteBatchKeyspaceId.

func (*ExecuteBatchKeyspaceIdsResponse) Descriptor

func (*ExecuteBatchKeyspaceIdsResponse) Descriptor() ([]byte, []int)

func (*ExecuteBatchKeyspaceIdsResponse) GetError

func (*ExecuteBatchKeyspaceIdsResponse) GetResults

func (*ExecuteBatchKeyspaceIdsResponse) GetSession

func (m *ExecuteBatchKeyspaceIdsResponse) GetSession() *Session

func (*ExecuteBatchKeyspaceIdsResponse) ProtoMessage

func (*ExecuteBatchKeyspaceIdsResponse) ProtoMessage()

func (*ExecuteBatchKeyspaceIdsResponse) Reset

func (*ExecuteBatchKeyspaceIdsResponse) String

type ExecuteBatchRequest

type ExecuteBatchRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data. It is returned by Begin.
	// Do not fill it in if outside of a transaction.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// queries is a list of query and bind variables to execute.
	Queries []*query.BoundQuery `protobuf:"bytes,3,rep,name=queries" json:"queries,omitempty"`
	// tablet_type is the type of tablets that these queries is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,4,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// as_transaction is deprecated.
	// We cannot use the proto3 deprecated feature yet because
	// the php compiler doesn't recognize that construct.
	AsTransaction bool `protobuf:"varint,5,opt,name=as_transaction,json=asTransaction" json:"as_transaction,omitempty"`
	// keyspace_shard can be 'keyspace' or 'keyspace/shard'.
	KeyspaceShard string `protobuf:"bytes,6,opt,name=keyspace_shard,json=keyspaceShard" json:"keyspace_shard,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,7,opt,name=options" json:"options,omitempty"`
}

ExecuteBatchRequest is the payload to ExecuteBatch.

func (*ExecuteBatchRequest) Descriptor

func (*ExecuteBatchRequest) Descriptor() ([]byte, []int)

func (*ExecuteBatchRequest) GetAsTransaction

func (m *ExecuteBatchRequest) GetAsTransaction() bool

func (*ExecuteBatchRequest) GetCallerId

func (m *ExecuteBatchRequest) GetCallerId() *vtrpc.CallerID

func (*ExecuteBatchRequest) GetKeyspaceShard

func (m *ExecuteBatchRequest) GetKeyspaceShard() string

func (*ExecuteBatchRequest) GetOptions

func (m *ExecuteBatchRequest) GetOptions() *query.ExecuteOptions

func (*ExecuteBatchRequest) GetQueries

func (m *ExecuteBatchRequest) GetQueries() []*query.BoundQuery

func (*ExecuteBatchRequest) GetSession

func (m *ExecuteBatchRequest) GetSession() *Session

func (*ExecuteBatchRequest) GetTabletType

func (m *ExecuteBatchRequest) GetTabletType() topodata.TabletType

func (*ExecuteBatchRequest) ProtoMessage

func (*ExecuteBatchRequest) ProtoMessage()

func (*ExecuteBatchRequest) Reset

func (m *ExecuteBatchRequest) Reset()

func (*ExecuteBatchRequest) String

func (m *ExecuteBatchRequest) String() string

type ExecuteBatchResponse

type ExecuteBatchResponse struct {
	// error contains an application level error if necessary. Note the
	// session may have changed, even when an error is returned (for
	// instance if a database integrity error happened).
	Error *vtrpc.RPCError `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
	// session is the updated session information (only returned inside a transaction).
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// results contains the query results, only set if application level error is unset.
	Results []*query.ResultWithError `protobuf:"bytes,3,rep,name=results" json:"results,omitempty"`
}

ExecuteBatchResponse is the returned value from ExecuteBatch.

func (*ExecuteBatchResponse) Descriptor

func (*ExecuteBatchResponse) Descriptor() ([]byte, []int)

func (*ExecuteBatchResponse) GetError

func (m *ExecuteBatchResponse) GetError() *vtrpc.RPCError

func (*ExecuteBatchResponse) GetResults

func (m *ExecuteBatchResponse) GetResults() []*query.ResultWithError

func (*ExecuteBatchResponse) GetSession

func (m *ExecuteBatchResponse) GetSession() *Session

func (*ExecuteBatchResponse) ProtoMessage

func (*ExecuteBatchResponse) ProtoMessage()

func (*ExecuteBatchResponse) Reset

func (m *ExecuteBatchResponse) Reset()

func (*ExecuteBatchResponse) String

func (m *ExecuteBatchResponse) String() string

type ExecuteBatchShardsRequest

type ExecuteBatchShardsRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data. It is returned by Begin.
	// Do not fill it in if outside of a transaction.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// queries carries all the queries to execute.
	Queries []*BoundShardQuery `protobuf:"bytes,3,rep,name=queries" json:"queries,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,4,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// as_transaction will execute the queries in this batch in a single transaction per shard, created for this purpose.
	// (this can be seen as adding a 'begin' before and 'commit' after the queries).
	// Only makes sense if tablet_type is master. If set, the Session is ignored.
	AsTransaction bool `protobuf:"varint,5,opt,name=as_transaction,json=asTransaction" json:"as_transaction,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,6,opt,name=options" json:"options,omitempty"`
}

ExecuteBatchShardsRequest is the payload to ExecuteBatchShards

func (*ExecuteBatchShardsRequest) Descriptor

func (*ExecuteBatchShardsRequest) Descriptor() ([]byte, []int)

func (*ExecuteBatchShardsRequest) GetAsTransaction

func (m *ExecuteBatchShardsRequest) GetAsTransaction() bool

func (*ExecuteBatchShardsRequest) GetCallerId

func (m *ExecuteBatchShardsRequest) GetCallerId() *vtrpc.CallerID

func (*ExecuteBatchShardsRequest) GetOptions

func (*ExecuteBatchShardsRequest) GetQueries

func (m *ExecuteBatchShardsRequest) GetQueries() []*BoundShardQuery

func (*ExecuteBatchShardsRequest) GetSession

func (m *ExecuteBatchShardsRequest) GetSession() *Session

func (*ExecuteBatchShardsRequest) GetTabletType

func (m *ExecuteBatchShardsRequest) GetTabletType() topodata.TabletType

func (*ExecuteBatchShardsRequest) ProtoMessage

func (*ExecuteBatchShardsRequest) ProtoMessage()

func (*ExecuteBatchShardsRequest) Reset

func (m *ExecuteBatchShardsRequest) Reset()

func (*ExecuteBatchShardsRequest) String

func (m *ExecuteBatchShardsRequest) String() string

type ExecuteBatchShardsResponse

type ExecuteBatchShardsResponse struct {
	// error contains an application level error if necessary. Note the
	// session may have changed, even when an error is returned (for
	// instance if a database integrity error happened).
	Error *vtrpc.RPCError `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
	// session is the updated session information (only returned inside a transaction).
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// result contains the query result, only set if error is unset.
	Results []*query.QueryResult `protobuf:"bytes,3,rep,name=results" json:"results,omitempty"`
}

ExecuteBatchShardsResponse is the returned value from ExecuteBatchShards.

func (*ExecuteBatchShardsResponse) Descriptor

func (*ExecuteBatchShardsResponse) Descriptor() ([]byte, []int)

func (*ExecuteBatchShardsResponse) GetError

func (m *ExecuteBatchShardsResponse) GetError() *vtrpc.RPCError

func (*ExecuteBatchShardsResponse) GetResults

func (m *ExecuteBatchShardsResponse) GetResults() []*query.QueryResult

func (*ExecuteBatchShardsResponse) GetSession

func (m *ExecuteBatchShardsResponse) GetSession() *Session

func (*ExecuteBatchShardsResponse) ProtoMessage

func (*ExecuteBatchShardsResponse) ProtoMessage()

func (*ExecuteBatchShardsResponse) Reset

func (m *ExecuteBatchShardsResponse) Reset()

func (*ExecuteBatchShardsResponse) String

func (m *ExecuteBatchShardsResponse) String() string

type ExecuteEntityIdsRequest

type ExecuteEntityIdsRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data. It is returned by Begin.
	// Do not fill it in if outside of a transaction.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,3,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,4,opt,name=keyspace" json:"keyspace,omitempty"`
	// entity_column_name is the column name to use.
	EntityColumnName string `protobuf:"bytes,5,opt,name=entity_column_name,json=entityColumnName" json:"entity_column_name,omitempty"`
	// entity_keyspace_ids are pairs of entity_column_name values
	// associated with its corresponding keyspace_id.
	EntityKeyspaceIds []*ExecuteEntityIdsRequest_EntityId `protobuf:"bytes,6,rep,name=entity_keyspace_ids,json=entityKeyspaceIds" json:"entity_keyspace_ids,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,7,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// not_in_transaction is deprecated and should not be used.
	NotInTransaction bool `protobuf:"varint,8,opt,name=not_in_transaction,json=notInTransaction" json:"not_in_transaction,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,9,opt,name=options" json:"options,omitempty"`
}

ExecuteEntityIdsRequest is the payload to ExecuteEntityIds.

func (*ExecuteEntityIdsRequest) Descriptor

func (*ExecuteEntityIdsRequest) Descriptor() ([]byte, []int)

func (*ExecuteEntityIdsRequest) GetCallerId

func (m *ExecuteEntityIdsRequest) GetCallerId() *vtrpc.CallerID

func (*ExecuteEntityIdsRequest) GetEntityColumnName

func (m *ExecuteEntityIdsRequest) GetEntityColumnName() string

func (*ExecuteEntityIdsRequest) GetEntityKeyspaceIds

func (m *ExecuteEntityIdsRequest) GetEntityKeyspaceIds() []*ExecuteEntityIdsRequest_EntityId

func (*ExecuteEntityIdsRequest) GetKeyspace

func (m *ExecuteEntityIdsRequest) GetKeyspace() string

func (*ExecuteEntityIdsRequest) GetNotInTransaction

func (m *ExecuteEntityIdsRequest) GetNotInTransaction() bool

func (*ExecuteEntityIdsRequest) GetOptions

func (m *ExecuteEntityIdsRequest) GetOptions() *query.ExecuteOptions

func (*ExecuteEntityIdsRequest) GetQuery

func (m *ExecuteEntityIdsRequest) GetQuery() *query.BoundQuery

func (*ExecuteEntityIdsRequest) GetSession

func (m *ExecuteEntityIdsRequest) GetSession() *Session

func (*ExecuteEntityIdsRequest) GetTabletType

func (m *ExecuteEntityIdsRequest) GetTabletType() topodata.TabletType

func (*ExecuteEntityIdsRequest) ProtoMessage

func (*ExecuteEntityIdsRequest) ProtoMessage()

func (*ExecuteEntityIdsRequest) Reset

func (m *ExecuteEntityIdsRequest) Reset()

func (*ExecuteEntityIdsRequest) String

func (m *ExecuteEntityIdsRequest) String() string

type ExecuteEntityIdsRequest_EntityId

type ExecuteEntityIdsRequest_EntityId struct {
	// type is the type of the entity's value. Can be NULL_TYPE.
	Type query.Type `protobuf:"varint,1,opt,name=type,enum=query.Type" json:"type,omitempty"`
	// value is the value for the entity. Not set if type is NULL_TYPE.
	Value []byte `protobuf:"bytes,2,opt,name=value,proto3" json:"value,omitempty"`
	// keyspace_id is the associated keyspace_id for the entity.
	KeyspaceId []byte `protobuf:"bytes,3,opt,name=keyspace_id,json=keyspaceId,proto3" json:"keyspace_id,omitempty"`
}

func (*ExecuteEntityIdsRequest_EntityId) Descriptor

func (*ExecuteEntityIdsRequest_EntityId) Descriptor() ([]byte, []int)

func (*ExecuteEntityIdsRequest_EntityId) GetKeyspaceId

func (m *ExecuteEntityIdsRequest_EntityId) GetKeyspaceId() []byte

func (*ExecuteEntityIdsRequest_EntityId) GetType

func (*ExecuteEntityIdsRequest_EntityId) GetValue

func (m *ExecuteEntityIdsRequest_EntityId) GetValue() []byte

func (*ExecuteEntityIdsRequest_EntityId) ProtoMessage

func (*ExecuteEntityIdsRequest_EntityId) ProtoMessage()

func (*ExecuteEntityIdsRequest_EntityId) Reset

func (*ExecuteEntityIdsRequest_EntityId) String

type ExecuteEntityIdsResponse

type ExecuteEntityIdsResponse struct {
	// error contains an application level error if necessary. Note the
	// session may have changed, even when an error is returned (for
	// instance if a database integrity error happened).
	Error *vtrpc.RPCError `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
	// session is the updated session information (only returned inside a transaction).
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// result contains the query result, only set if error is unset.
	Result *query.QueryResult `protobuf:"bytes,3,opt,name=result" json:"result,omitempty"`
}

ExecuteEntityIdsResponse is the returned value from ExecuteEntityIds.

func (*ExecuteEntityIdsResponse) Descriptor

func (*ExecuteEntityIdsResponse) Descriptor() ([]byte, []int)

func (*ExecuteEntityIdsResponse) GetError

func (m *ExecuteEntityIdsResponse) GetError() *vtrpc.RPCError

func (*ExecuteEntityIdsResponse) GetResult

func (m *ExecuteEntityIdsResponse) GetResult() *query.QueryResult

func (*ExecuteEntityIdsResponse) GetSession

func (m *ExecuteEntityIdsResponse) GetSession() *Session

func (*ExecuteEntityIdsResponse) ProtoMessage

func (*ExecuteEntityIdsResponse) ProtoMessage()

func (*ExecuteEntityIdsResponse) Reset

func (m *ExecuteEntityIdsResponse) Reset()

func (*ExecuteEntityIdsResponse) String

func (m *ExecuteEntityIdsResponse) String() string

type ExecuteKeyRangesRequest

type ExecuteKeyRangesRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data. It is returned by Begin.
	// Do not fill it in if outside of a transaction.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,3,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to
	Keyspace string `protobuf:"bytes,4,opt,name=keyspace" json:"keyspace,omitempty"`
	// key_ranges contains the list of key ranges affected by this query.
	// Will be used to find the shards to send the query to.
	KeyRanges []*topodata.KeyRange `protobuf:"bytes,5,rep,name=key_ranges,json=keyRanges" json:"key_ranges,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,6,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// not_in_transaction is deprecated and should not be used.
	NotInTransaction bool `protobuf:"varint,7,opt,name=not_in_transaction,json=notInTransaction" json:"not_in_transaction,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,8,opt,name=options" json:"options,omitempty"`
}

ExecuteKeyRangesRequest is the payload to ExecuteKeyRanges.

func (*ExecuteKeyRangesRequest) Descriptor

func (*ExecuteKeyRangesRequest) Descriptor() ([]byte, []int)

func (*ExecuteKeyRangesRequest) GetCallerId

func (m *ExecuteKeyRangesRequest) GetCallerId() *vtrpc.CallerID

func (*ExecuteKeyRangesRequest) GetKeyRanges

func (m *ExecuteKeyRangesRequest) GetKeyRanges() []*topodata.KeyRange

func (*ExecuteKeyRangesRequest) GetKeyspace

func (m *ExecuteKeyRangesRequest) GetKeyspace() string

func (*ExecuteKeyRangesRequest) GetNotInTransaction

func (m *ExecuteKeyRangesRequest) GetNotInTransaction() bool

func (*ExecuteKeyRangesRequest) GetOptions

func (m *ExecuteKeyRangesRequest) GetOptions() *query.ExecuteOptions

func (*ExecuteKeyRangesRequest) GetQuery

func (m *ExecuteKeyRangesRequest) GetQuery() *query.BoundQuery

func (*ExecuteKeyRangesRequest) GetSession

func (m *ExecuteKeyRangesRequest) GetSession() *Session

func (*ExecuteKeyRangesRequest) GetTabletType

func (m *ExecuteKeyRangesRequest) GetTabletType() topodata.TabletType

func (*ExecuteKeyRangesRequest) ProtoMessage

func (*ExecuteKeyRangesRequest) ProtoMessage()

func (*ExecuteKeyRangesRequest) Reset

func (m *ExecuteKeyRangesRequest) Reset()

func (*ExecuteKeyRangesRequest) String

func (m *ExecuteKeyRangesRequest) String() string

type ExecuteKeyRangesResponse

type ExecuteKeyRangesResponse struct {
	// error contains an application level error if necessary. Note the
	// session may have changed, even when an error is returned (for
	// instance if a database integrity error happened).
	Error *vtrpc.RPCError `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
	// session is the updated session information (only returned inside a transaction).
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// result contains the query result, only set if error is unset.
	Result *query.QueryResult `protobuf:"bytes,3,opt,name=result" json:"result,omitempty"`
}

ExecuteKeyRangesResponse is the returned value from ExecuteKeyRanges.

func (*ExecuteKeyRangesResponse) Descriptor

func (*ExecuteKeyRangesResponse) Descriptor() ([]byte, []int)

func (*ExecuteKeyRangesResponse) GetError

func (m *ExecuteKeyRangesResponse) GetError() *vtrpc.RPCError

func (*ExecuteKeyRangesResponse) GetResult

func (m *ExecuteKeyRangesResponse) GetResult() *query.QueryResult

func (*ExecuteKeyRangesResponse) GetSession

func (m *ExecuteKeyRangesResponse) GetSession() *Session

func (*ExecuteKeyRangesResponse) ProtoMessage

func (*ExecuteKeyRangesResponse) ProtoMessage()

func (*ExecuteKeyRangesResponse) Reset

func (m *ExecuteKeyRangesResponse) Reset()

func (*ExecuteKeyRangesResponse) String

func (m *ExecuteKeyRangesResponse) String() string

type ExecuteKeyspaceIdsRequest

type ExecuteKeyspaceIdsRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data. It is returned by Begin.
	// Do not fill it in if outside of a transaction.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,3,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,4,opt,name=keyspace" json:"keyspace,omitempty"`
	// keyspace_ids contains the list of keyspace_ids affected by this query.
	// Will be used to find the shards to send the query to.
	KeyspaceIds [][]byte `protobuf:"bytes,5,rep,name=keyspace_ids,json=keyspaceIds,proto3" json:"keyspace_ids,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,6,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// not_in_transaction is deprecated and should not be used.
	NotInTransaction bool `protobuf:"varint,7,opt,name=not_in_transaction,json=notInTransaction" json:"not_in_transaction,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,8,opt,name=options" json:"options,omitempty"`
}

ExecuteKeyspaceIdsRequest is the payload to ExecuteKeyspaceIds.

func (*ExecuteKeyspaceIdsRequest) Descriptor

func (*ExecuteKeyspaceIdsRequest) Descriptor() ([]byte, []int)

func (*ExecuteKeyspaceIdsRequest) GetCallerId

func (m *ExecuteKeyspaceIdsRequest) GetCallerId() *vtrpc.CallerID

func (*ExecuteKeyspaceIdsRequest) GetKeyspace

func (m *ExecuteKeyspaceIdsRequest) GetKeyspace() string

func (*ExecuteKeyspaceIdsRequest) GetKeyspaceIds

func (m *ExecuteKeyspaceIdsRequest) GetKeyspaceIds() [][]byte

func (*ExecuteKeyspaceIdsRequest) GetNotInTransaction

func (m *ExecuteKeyspaceIdsRequest) GetNotInTransaction() bool

func (*ExecuteKeyspaceIdsRequest) GetOptions

func (*ExecuteKeyspaceIdsRequest) GetQuery

func (*ExecuteKeyspaceIdsRequest) GetSession

func (m *ExecuteKeyspaceIdsRequest) GetSession() *Session

func (*ExecuteKeyspaceIdsRequest) GetTabletType

func (m *ExecuteKeyspaceIdsRequest) GetTabletType() topodata.TabletType

func (*ExecuteKeyspaceIdsRequest) ProtoMessage

func (*ExecuteKeyspaceIdsRequest) ProtoMessage()

func (*ExecuteKeyspaceIdsRequest) Reset

func (m *ExecuteKeyspaceIdsRequest) Reset()

func (*ExecuteKeyspaceIdsRequest) String

func (m *ExecuteKeyspaceIdsRequest) String() string

type ExecuteKeyspaceIdsResponse

type ExecuteKeyspaceIdsResponse struct {
	// error contains an application level error if necessary. Note the
	// session may have changed, even when an error is returned (for
	// instance if a database integrity error happened).
	Error *vtrpc.RPCError `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
	// session is the updated session information (only returned inside a transaction).
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// result contains the query result, only set if error is unset.
	Result *query.QueryResult `protobuf:"bytes,3,opt,name=result" json:"result,omitempty"`
}

ExecuteKeyspaceIdsResponse is the returned value from ExecuteKeyspaceIds.

func (*ExecuteKeyspaceIdsResponse) Descriptor

func (*ExecuteKeyspaceIdsResponse) Descriptor() ([]byte, []int)

func (*ExecuteKeyspaceIdsResponse) GetError

func (m *ExecuteKeyspaceIdsResponse) GetError() *vtrpc.RPCError

func (*ExecuteKeyspaceIdsResponse) GetResult

func (*ExecuteKeyspaceIdsResponse) GetSession

func (m *ExecuteKeyspaceIdsResponse) GetSession() *Session

func (*ExecuteKeyspaceIdsResponse) ProtoMessage

func (*ExecuteKeyspaceIdsResponse) ProtoMessage()

func (*ExecuteKeyspaceIdsResponse) Reset

func (m *ExecuteKeyspaceIdsResponse) Reset()

func (*ExecuteKeyspaceIdsResponse) String

func (m *ExecuteKeyspaceIdsResponse) String() string

type ExecuteRequest

type ExecuteRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data. It is returned by Begin.
	// Do not fill it in if outside of a transaction.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,3,opt,name=query" json:"query,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,4,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// not_in_transaction is deprecated and should not be used.
	NotInTransaction bool `protobuf:"varint,5,opt,name=not_in_transaction,json=notInTransaction" json:"not_in_transaction,omitempty"`
	// keyspace_shard can be 'keyspace' or 'keyspace/shard'.
	KeyspaceShard string `protobuf:"bytes,6,opt,name=keyspace_shard,json=keyspaceShard" json:"keyspace_shard,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,7,opt,name=options" json:"options,omitempty"`
}

ExecuteRequest is the payload to Execute.

func (*ExecuteRequest) Descriptor

func (*ExecuteRequest) Descriptor() ([]byte, []int)

func (*ExecuteRequest) GetCallerId

func (m *ExecuteRequest) GetCallerId() *vtrpc.CallerID

func (*ExecuteRequest) GetKeyspaceShard

func (m *ExecuteRequest) GetKeyspaceShard() string

func (*ExecuteRequest) GetNotInTransaction

func (m *ExecuteRequest) GetNotInTransaction() bool

func (*ExecuteRequest) GetOptions

func (m *ExecuteRequest) GetOptions() *query.ExecuteOptions

func (*ExecuteRequest) GetQuery

func (m *ExecuteRequest) GetQuery() *query.BoundQuery

func (*ExecuteRequest) GetSession

func (m *ExecuteRequest) GetSession() *Session

func (*ExecuteRequest) GetTabletType

func (m *ExecuteRequest) GetTabletType() topodata.TabletType

func (*ExecuteRequest) ProtoMessage

func (*ExecuteRequest) ProtoMessage()

func (*ExecuteRequest) Reset

func (m *ExecuteRequest) Reset()

func (*ExecuteRequest) String

func (m *ExecuteRequest) String() string

type ExecuteResponse

type ExecuteResponse struct {
	// error contains an application level error if necessary. Note the
	// session may have changed, even when an error is returned (for
	// instance if a database integrity error happened).
	Error *vtrpc.RPCError `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
	// session is the updated session information (only returned inside a transaction).
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// result contains the query result, only set if error is unset.
	Result *query.QueryResult `protobuf:"bytes,3,opt,name=result" json:"result,omitempty"`
}

ExecuteResponse is the returned value from Execute.

func (*ExecuteResponse) Descriptor

func (*ExecuteResponse) Descriptor() ([]byte, []int)

func (*ExecuteResponse) GetError

func (m *ExecuteResponse) GetError() *vtrpc.RPCError

func (*ExecuteResponse) GetResult

func (m *ExecuteResponse) GetResult() *query.QueryResult

func (*ExecuteResponse) GetSession

func (m *ExecuteResponse) GetSession() *Session

func (*ExecuteResponse) ProtoMessage

func (*ExecuteResponse) ProtoMessage()

func (*ExecuteResponse) Reset

func (m *ExecuteResponse) Reset()

func (*ExecuteResponse) String

func (m *ExecuteResponse) String() string

type ExecuteShardsRequest

type ExecuteShardsRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data. It is returned by Begin.
	// Do not fill it in if outside of a transaction.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,3,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,4,opt,name=keyspace" json:"keyspace,omitempty"`
	// shards to target the query to. A DML can only target one shard.
	Shards []string `protobuf:"bytes,5,rep,name=shards" json:"shards,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,6,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// not_in_transaction is deprecated and should not be used.
	NotInTransaction bool `protobuf:"varint,7,opt,name=not_in_transaction,json=notInTransaction" json:"not_in_transaction,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,8,opt,name=options" json:"options,omitempty"`
}

ExecuteShardsRequest is the payload to ExecuteShards.

func (*ExecuteShardsRequest) Descriptor

func (*ExecuteShardsRequest) Descriptor() ([]byte, []int)

func (*ExecuteShardsRequest) GetCallerId

func (m *ExecuteShardsRequest) GetCallerId() *vtrpc.CallerID

func (*ExecuteShardsRequest) GetKeyspace

func (m *ExecuteShardsRequest) GetKeyspace() string

func (*ExecuteShardsRequest) GetNotInTransaction

func (m *ExecuteShardsRequest) GetNotInTransaction() bool

func (*ExecuteShardsRequest) GetOptions

func (m *ExecuteShardsRequest) GetOptions() *query.ExecuteOptions

func (*ExecuteShardsRequest) GetQuery

func (m *ExecuteShardsRequest) GetQuery() *query.BoundQuery

func (*ExecuteShardsRequest) GetSession

func (m *ExecuteShardsRequest) GetSession() *Session

func (*ExecuteShardsRequest) GetShards

func (m *ExecuteShardsRequest) GetShards() []string

func (*ExecuteShardsRequest) GetTabletType

func (m *ExecuteShardsRequest) GetTabletType() topodata.TabletType

func (*ExecuteShardsRequest) ProtoMessage

func (*ExecuteShardsRequest) ProtoMessage()

func (*ExecuteShardsRequest) Reset

func (m *ExecuteShardsRequest) Reset()

func (*ExecuteShardsRequest) String

func (m *ExecuteShardsRequest) String() string

type ExecuteShardsResponse

type ExecuteShardsResponse struct {
	// error contains an application level error if necessary. Note the
	// session may have changed, even when an error is returned (for
	// instance if a database integrity error happened).
	Error *vtrpc.RPCError `protobuf:"bytes,1,opt,name=error" json:"error,omitempty"`
	// session is the updated session information (only returned inside a transaction).
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
	// result contains the query result, only set if error is unset.
	Result *query.QueryResult `protobuf:"bytes,3,opt,name=result" json:"result,omitempty"`
}

ExecuteShardsResponse is the returned value from ExecuteShards.

func (*ExecuteShardsResponse) Descriptor

func (*ExecuteShardsResponse) Descriptor() ([]byte, []int)

func (*ExecuteShardsResponse) GetError

func (m *ExecuteShardsResponse) GetError() *vtrpc.RPCError

func (*ExecuteShardsResponse) GetResult

func (m *ExecuteShardsResponse) GetResult() *query.QueryResult

func (*ExecuteShardsResponse) GetSession

func (m *ExecuteShardsResponse) GetSession() *Session

func (*ExecuteShardsResponse) ProtoMessage

func (*ExecuteShardsResponse) ProtoMessage()

func (*ExecuteShardsResponse) Reset

func (m *ExecuteShardsResponse) Reset()

func (*ExecuteShardsResponse) String

func (m *ExecuteShardsResponse) String() string

type GetSrvKeyspaceRequest

type GetSrvKeyspaceRequest struct {
	// keyspace name to fetch.
	Keyspace string `protobuf:"bytes,1,opt,name=keyspace" json:"keyspace,omitempty"`
}

GetSrvKeyspaceRequest is the payload to GetSrvKeyspace.

func (*GetSrvKeyspaceRequest) Descriptor

func (*GetSrvKeyspaceRequest) Descriptor() ([]byte, []int)

func (*GetSrvKeyspaceRequest) GetKeyspace

func (m *GetSrvKeyspaceRequest) GetKeyspace() string

func (*GetSrvKeyspaceRequest) ProtoMessage

func (*GetSrvKeyspaceRequest) ProtoMessage()

func (*GetSrvKeyspaceRequest) Reset

func (m *GetSrvKeyspaceRequest) Reset()

func (*GetSrvKeyspaceRequest) String

func (m *GetSrvKeyspaceRequest) String() string

type GetSrvKeyspaceResponse

type GetSrvKeyspaceResponse struct {
	// srv_keyspace is the topology object for the SrvKeyspace.
	SrvKeyspace *topodata.SrvKeyspace `protobuf:"bytes,1,opt,name=srv_keyspace,json=srvKeyspace" json:"srv_keyspace,omitempty"`
}

GetSrvKeyspaceResponse is the returned value from GetSrvKeyspace.

func (*GetSrvKeyspaceResponse) Descriptor

func (*GetSrvKeyspaceResponse) Descriptor() ([]byte, []int)

func (*GetSrvKeyspaceResponse) GetSrvKeyspace

func (m *GetSrvKeyspaceResponse) GetSrvKeyspace() *topodata.SrvKeyspace

func (*GetSrvKeyspaceResponse) ProtoMessage

func (*GetSrvKeyspaceResponse) ProtoMessage()

func (*GetSrvKeyspaceResponse) Reset

func (m *GetSrvKeyspaceResponse) Reset()

func (*GetSrvKeyspaceResponse) String

func (m *GetSrvKeyspaceResponse) String() string

type MessageAckRequest

type MessageAckRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// Optional keyspace for message table.
	Keyspace string `protobuf:"bytes,2,opt,name=keyspace" json:"keyspace,omitempty"`
	// name is the message table name.
	Name string `protobuf:"bytes,3,opt,name=name" json:"name,omitempty"`
	// ids is the list of ids to ack.
	Ids []*query.Value `protobuf:"bytes,4,rep,name=ids" json:"ids,omitempty"`
}

MessageAckRequest is the request payload for MessageAck.

func (*MessageAckRequest) Descriptor

func (*MessageAckRequest) Descriptor() ([]byte, []int)

func (*MessageAckRequest) GetCallerId

func (m *MessageAckRequest) GetCallerId() *vtrpc.CallerID

func (*MessageAckRequest) GetIds

func (m *MessageAckRequest) GetIds() []*query.Value

func (*MessageAckRequest) GetKeyspace

func (m *MessageAckRequest) GetKeyspace() string

func (*MessageAckRequest) GetName

func (m *MessageAckRequest) GetName() string

func (*MessageAckRequest) ProtoMessage

func (*MessageAckRequest) ProtoMessage()

func (*MessageAckRequest) Reset

func (m *MessageAckRequest) Reset()

func (*MessageAckRequest) String

func (m *MessageAckRequest) String() string

type MessageStreamRequest

type MessageStreamRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,2,opt,name=keyspace" json:"keyspace,omitempty"`
	// shard to target the query to, for unsharded keyspaces.
	Shard string `protobuf:"bytes,3,opt,name=shard" json:"shard,omitempty"`
	// KeyRange to target the query to, for sharded keyspaces.
	KeyRange *topodata.KeyRange `protobuf:"bytes,4,opt,name=key_range,json=keyRange" json:"key_range,omitempty"`
	// name is the message table name.
	Name string `protobuf:"bytes,5,opt,name=name" json:"name,omitempty"`
}

MessageStreamRequest is the request payload for MessageStream.

func (*MessageStreamRequest) Descriptor

func (*MessageStreamRequest) Descriptor() ([]byte, []int)

func (*MessageStreamRequest) GetCallerId

func (m *MessageStreamRequest) GetCallerId() *vtrpc.CallerID

func (*MessageStreamRequest) GetKeyRange

func (m *MessageStreamRequest) GetKeyRange() *topodata.KeyRange

func (*MessageStreamRequest) GetKeyspace

func (m *MessageStreamRequest) GetKeyspace() string

func (*MessageStreamRequest) GetName

func (m *MessageStreamRequest) GetName() string

func (*MessageStreamRequest) GetShard

func (m *MessageStreamRequest) GetShard() string

func (*MessageStreamRequest) ProtoMessage

func (*MessageStreamRequest) ProtoMessage()

func (*MessageStreamRequest) Reset

func (m *MessageStreamRequest) Reset()

func (*MessageStreamRequest) String

func (m *MessageStreamRequest) String() string

type ResolveTransactionRequest

type ResolveTransactionRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// dtid is the dtid of the transaction to be resolved.
	Dtid string `protobuf:"bytes,2,opt,name=dtid" json:"dtid,omitempty"`
}

ResolveTransactionRequest is the payload to ResolveTransaction.

func (*ResolveTransactionRequest) Descriptor

func (*ResolveTransactionRequest) Descriptor() ([]byte, []int)

func (*ResolveTransactionRequest) GetCallerId

func (m *ResolveTransactionRequest) GetCallerId() *vtrpc.CallerID

func (*ResolveTransactionRequest) GetDtid

func (m *ResolveTransactionRequest) GetDtid() string

func (*ResolveTransactionRequest) ProtoMessage

func (*ResolveTransactionRequest) ProtoMessage()

func (*ResolveTransactionRequest) Reset

func (m *ResolveTransactionRequest) Reset()

func (*ResolveTransactionRequest) String

func (m *ResolveTransactionRequest) String() string

type ResolveTransactionResponse

type ResolveTransactionResponse struct {
}

ResolveTransactionResponse is the returned value from Rollback.

func (*ResolveTransactionResponse) Descriptor

func (*ResolveTransactionResponse) Descriptor() ([]byte, []int)

func (*ResolveTransactionResponse) ProtoMessage

func (*ResolveTransactionResponse) ProtoMessage()

func (*ResolveTransactionResponse) Reset

func (m *ResolveTransactionResponse) Reset()

func (*ResolveTransactionResponse) String

func (m *ResolveTransactionResponse) String() string

type RollbackRequest

type RollbackRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// session carries the current transaction data to rollback.
	Session *Session `protobuf:"bytes,2,opt,name=session" json:"session,omitempty"`
}

RollbackRequest is the payload to Rollback.

func (*RollbackRequest) Descriptor

func (*RollbackRequest) Descriptor() ([]byte, []int)

func (*RollbackRequest) GetCallerId

func (m *RollbackRequest) GetCallerId() *vtrpc.CallerID

func (*RollbackRequest) GetSession

func (m *RollbackRequest) GetSession() *Session

func (*RollbackRequest) ProtoMessage

func (*RollbackRequest) ProtoMessage()

func (*RollbackRequest) Reset

func (m *RollbackRequest) Reset()

func (*RollbackRequest) String

func (m *RollbackRequest) String() string

type RollbackResponse

type RollbackResponse struct {
}

RollbackResponse is the returned value from Rollback.

func (*RollbackResponse) Descriptor

func (*RollbackResponse) Descriptor() ([]byte, []int)

func (*RollbackResponse) ProtoMessage

func (*RollbackResponse) ProtoMessage()

func (*RollbackResponse) Reset

func (m *RollbackResponse) Reset()

func (*RollbackResponse) String

func (m *RollbackResponse) String() string

type Session

type Session struct {
	InTransaction bool                    `protobuf:"varint,1,opt,name=in_transaction,json=inTransaction" json:"in_transaction,omitempty"`
	ShardSessions []*Session_ShardSession `protobuf:"bytes,2,rep,name=shard_sessions,json=shardSessions" json:"shard_sessions,omitempty"`
	// single_db specifies if the transaction should be restricted
	// to a single database.
	SingleDb bool `protobuf:"varint,3,opt,name=single_db,json=singleDb" json:"single_db,omitempty"`
	// autocommit specifies if the session is in autocommit mode.
	Autocommit bool `protobuf:"varint,4,opt,name=autocommit" json:"autocommit,omitempty"`
}

Session objects are session cookies and are invalidated on use. Query results will contain updated session values. Their content should be opaque to the user.

func (*Session) Descriptor

func (*Session) Descriptor() ([]byte, []int)

func (*Session) GetAutocommit

func (m *Session) GetAutocommit() bool

func (*Session) GetInTransaction

func (m *Session) GetInTransaction() bool

func (*Session) GetShardSessions

func (m *Session) GetShardSessions() []*Session_ShardSession

func (*Session) GetSingleDb

func (m *Session) GetSingleDb() bool

func (*Session) ProtoMessage

func (*Session) ProtoMessage()

func (*Session) Reset

func (m *Session) Reset()

func (*Session) String

func (m *Session) String() string

type Session_ShardSession

type Session_ShardSession struct {
	Target        *query.Target `protobuf:"bytes,1,opt,name=target" json:"target,omitempty"`
	TransactionId int64         `protobuf:"varint,2,opt,name=transaction_id,json=transactionId" json:"transaction_id,omitempty"`
}

func (*Session_ShardSession) Descriptor

func (*Session_ShardSession) Descriptor() ([]byte, []int)

func (*Session_ShardSession) GetTarget

func (m *Session_ShardSession) GetTarget() *query.Target

func (*Session_ShardSession) GetTransactionId

func (m *Session_ShardSession) GetTransactionId() int64

func (*Session_ShardSession) ProtoMessage

func (*Session_ShardSession) ProtoMessage()

func (*Session_ShardSession) Reset

func (m *Session_ShardSession) Reset()

func (*Session_ShardSession) String

func (m *Session_ShardSession) String() string

type SplitQueryRequest

type SplitQueryRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,2,opt,name=keyspace" json:"keyspace,omitempty"`
	// The query and bind variables to produce splits for.
	// The given query must be a simple query of the form
	// SELECT <cols> FROM <table> WHERE <filter>.
	// It must not contain subqueries nor any of the keywords
	// JOIN, GROUP BY, ORDER BY, LIMIT, DISTINCT.
	// Furthermore, <table> must be a single “concrete” table.
	// It cannot be a view.
	Query *query.BoundQuery `protobuf:"bytes,3,opt,name=query" json:"query,omitempty"`
	// Each generated query-part will be restricted to rows whose values
	// in the columns listed in this field are in a particular range.
	// The list of columns named here must be a prefix of the list of
	// columns defining some index or primary key of the table
	// referenced in 'query'. For many tables using the primary key columns
	// (in order) is sufficient and this is the default if this field is omitted.
	// See the comment on the 'algorithm' field for more restrictions and
	// information.
	SplitColumn []string `protobuf:"bytes,4,rep,name=split_column,json=splitColumn" json:"split_column,omitempty"`
	// You can specify either an estimate of the number of query-parts to
	// generate or an estimate of the number of rows each query-part should
	// return.
	// Thus, exactly one of split_count or num_rows_per_query_part
	// should be nonzero.
	// The non-given parameter is calculated from the given parameter
	// using the formula: split_count * num_rows_per_query_pary = table_size,
	// where table_size is an approximation of the number of rows in the
	// table.
	// Note that if "split_count" is given it is regarded as an estimate.
	// The number of query-parts returned may differ slightly (in particular,
	// if it's not a whole multiple of the number of vitess shards).
	SplitCount          int64 `protobuf:"varint,5,opt,name=split_count,json=splitCount" json:"split_count,omitempty"`
	NumRowsPerQueryPart int64 `protobuf:"varint,6,opt,name=num_rows_per_query_part,json=numRowsPerQueryPart" json:"num_rows_per_query_part,omitempty"`
	// The algorithm to use to split the query. The split algorithm is performed
	// on each database shard in parallel. The lists of query-parts generated
	// by the shards are merged and returned to the caller.
	// Two algorithms are supported:
	//  EQUAL_SPLITS
	//    If this algorithm is selected then only the first 'split_column' given
	//    is used (or the first primary key column if the 'split_column' field is
	//    empty). In the rest of this algorithm's description, we refer to
	//    this column as "the split column".
	//    The split column must have numeric type (integral or floating point).
	//    The algorithm works by taking the interval [min, max], where min and
	//    max are the minimum and maximum values of the split column in
	//    the table-shard, respectively, and partitioning it into 'split_count'
	//    sub-intervals of equal size. The added WHERE clause of each query-part
	//    restricts that part to rows whose value in the split column belongs to
	//    a particular sub-interval. This is fast, but requires that the
	//    distribution of values of the split column be uniform in [min, max]
	//    for the number of rows returned by each query part to be roughly the
	//    same.
	//  FULL_SCAN
	//    If this algorithm is used then the split_column must be the primary key
	//    columns (in order).
	//    This algorithm performs a full-scan of the table-shard referenced
	//    in 'query' to get "boundary" rows that are num_rows_per_query_part
	//    apart when the table is ordered by the columns listed in
	//    'split_column'. It then restricts each query-part to the rows
	//    located between two successive boundary rows.
	//    This algorithm supports multiple split_column's of any type,
	//    but is slower than EQUAL_SPLITS.
	Algorithm query.SplitQueryRequest_Algorithm `protobuf:"varint,7,opt,name=algorithm,enum=query.SplitQueryRequest_Algorithm" json:"algorithm,omitempty"`
	// TODO(erez): This field is no longer used by the server code.
	// Remove this field after this new server code is released to prod.
	// We must keep it for now, so that clients can still send it to the old
	// server code currently in production.
	UseSplitQueryV2 bool `protobuf:"varint,8,opt,name=use_split_query_v2,json=useSplitQueryV2" json:"use_split_query_v2,omitempty"`
}

SplitQueryRequest is the payload to SplitQuery.

SplitQuery takes a "SELECT" query and generates a list of queries called "query-parts". Each query-part consists of the original query with an added WHERE clause that restricts the query-part to operate only on rows whose values in the the columns listed in the "split_column" field of the request (see below) are in a particular range.

It is guaranteed that the set of rows obtained from executing each query-part on a database snapshot and merging (without deduping) the results is equal to the set of rows obtained from executing the original query on the same snapshot with the rows containing NULL values in any of the split_column's excluded.

This is typically called by the MapReduce master when reading from Vitess. There it's desirable that the sets of rows returned by the query-parts have roughly the same size.

func (*SplitQueryRequest) Descriptor

func (*SplitQueryRequest) Descriptor() ([]byte, []int)

func (*SplitQueryRequest) GetAlgorithm

func (*SplitQueryRequest) GetCallerId

func (m *SplitQueryRequest) GetCallerId() *vtrpc.CallerID

func (*SplitQueryRequest) GetKeyspace

func (m *SplitQueryRequest) GetKeyspace() string

func (*SplitQueryRequest) GetNumRowsPerQueryPart

func (m *SplitQueryRequest) GetNumRowsPerQueryPart() int64

func (*SplitQueryRequest) GetQuery

func (m *SplitQueryRequest) GetQuery() *query.BoundQuery

func (*SplitQueryRequest) GetSplitColumn

func (m *SplitQueryRequest) GetSplitColumn() []string

func (*SplitQueryRequest) GetSplitCount

func (m *SplitQueryRequest) GetSplitCount() int64

func (*SplitQueryRequest) GetUseSplitQueryV2

func (m *SplitQueryRequest) GetUseSplitQueryV2() bool

func (*SplitQueryRequest) ProtoMessage

func (*SplitQueryRequest) ProtoMessage()

func (*SplitQueryRequest) Reset

func (m *SplitQueryRequest) Reset()

func (*SplitQueryRequest) String

func (m *SplitQueryRequest) String() string

type SplitQueryResponse

type SplitQueryResponse struct {
	// splits contains the queries to run to fetch the entire data set.
	Splits []*SplitQueryResponse_Part `protobuf:"bytes,1,rep,name=splits" json:"splits,omitempty"`
}

SplitQueryResponse is the returned value from SplitQuery.

func (*SplitQueryResponse) Descriptor

func (*SplitQueryResponse) Descriptor() ([]byte, []int)

func (*SplitQueryResponse) GetSplits

func (m *SplitQueryResponse) GetSplits() []*SplitQueryResponse_Part

func (*SplitQueryResponse) ProtoMessage

func (*SplitQueryResponse) ProtoMessage()

func (*SplitQueryResponse) Reset

func (m *SplitQueryResponse) Reset()

func (*SplitQueryResponse) String

func (m *SplitQueryResponse) String() string

type SplitQueryResponse_KeyRangePart

type SplitQueryResponse_KeyRangePart struct {
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,1,opt,name=keyspace" json:"keyspace,omitempty"`
	// key ranges to target the query to.
	KeyRanges []*topodata.KeyRange `protobuf:"bytes,2,rep,name=key_ranges,json=keyRanges" json:"key_ranges,omitempty"`
}

func (*SplitQueryResponse_KeyRangePart) Descriptor

func (*SplitQueryResponse_KeyRangePart) Descriptor() ([]byte, []int)

func (*SplitQueryResponse_KeyRangePart) GetKeyRanges

func (m *SplitQueryResponse_KeyRangePart) GetKeyRanges() []*topodata.KeyRange

func (*SplitQueryResponse_KeyRangePart) GetKeyspace

func (m *SplitQueryResponse_KeyRangePart) GetKeyspace() string

func (*SplitQueryResponse_KeyRangePart) ProtoMessage

func (*SplitQueryResponse_KeyRangePart) ProtoMessage()

func (*SplitQueryResponse_KeyRangePart) Reset

func (*SplitQueryResponse_KeyRangePart) String

type SplitQueryResponse_Part

type SplitQueryResponse_Part struct {
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,1,opt,name=query" json:"query,omitempty"`
	// key_range_part is set if the query should be executed by
	// ExecuteKeyRanges.
	KeyRangePart *SplitQueryResponse_KeyRangePart `protobuf:"bytes,2,opt,name=key_range_part,json=keyRangePart" json:"key_range_part,omitempty"`
	// shard_part is set if the query should be executed by ExecuteShards.
	ShardPart *SplitQueryResponse_ShardPart `protobuf:"bytes,3,opt,name=shard_part,json=shardPart" json:"shard_part,omitempty"`
	// size is the approximate number of rows this query will return.
	Size int64 `protobuf:"varint,4,opt,name=size" json:"size,omitempty"`
}

func (*SplitQueryResponse_Part) Descriptor

func (*SplitQueryResponse_Part) Descriptor() ([]byte, []int)

func (*SplitQueryResponse_Part) GetKeyRangePart

func (*SplitQueryResponse_Part) GetQuery

func (m *SplitQueryResponse_Part) GetQuery() *query.BoundQuery

func (*SplitQueryResponse_Part) GetShardPart

func (*SplitQueryResponse_Part) GetSize

func (m *SplitQueryResponse_Part) GetSize() int64

func (*SplitQueryResponse_Part) ProtoMessage

func (*SplitQueryResponse_Part) ProtoMessage()

func (*SplitQueryResponse_Part) Reset

func (m *SplitQueryResponse_Part) Reset()

func (*SplitQueryResponse_Part) String

func (m *SplitQueryResponse_Part) String() string

type SplitQueryResponse_ShardPart

type SplitQueryResponse_ShardPart struct {
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,1,opt,name=keyspace" json:"keyspace,omitempty"`
	// shards to target the query to.
	Shards []string `protobuf:"bytes,2,rep,name=shards" json:"shards,omitempty"`
}

func (*SplitQueryResponse_ShardPart) Descriptor

func (*SplitQueryResponse_ShardPart) Descriptor() ([]byte, []int)

func (*SplitQueryResponse_ShardPart) GetKeyspace

func (m *SplitQueryResponse_ShardPart) GetKeyspace() string

func (*SplitQueryResponse_ShardPart) GetShards

func (m *SplitQueryResponse_ShardPart) GetShards() []string

func (*SplitQueryResponse_ShardPart) ProtoMessage

func (*SplitQueryResponse_ShardPart) ProtoMessage()

func (*SplitQueryResponse_ShardPart) Reset

func (m *SplitQueryResponse_ShardPart) Reset()

func (*SplitQueryResponse_ShardPart) String

type StreamExecuteKeyRangesRequest

type StreamExecuteKeyRangesRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,2,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,3,opt,name=keyspace" json:"keyspace,omitempty"`
	// key_ranges contains the list of key ranges affected by this query.
	// Will be used to find the shards to send the query to.
	KeyRanges []*topodata.KeyRange `protobuf:"bytes,4,rep,name=key_ranges,json=keyRanges" json:"key_ranges,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,5,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,6,opt,name=options" json:"options,omitempty"`
}

StreamExecuteKeyRangesRequest is the payload to StreamExecuteKeyRanges.

func (*StreamExecuteKeyRangesRequest) Descriptor

func (*StreamExecuteKeyRangesRequest) Descriptor() ([]byte, []int)

func (*StreamExecuteKeyRangesRequest) GetCallerId

func (m *StreamExecuteKeyRangesRequest) GetCallerId() *vtrpc.CallerID

func (*StreamExecuteKeyRangesRequest) GetKeyRanges

func (m *StreamExecuteKeyRangesRequest) GetKeyRanges() []*topodata.KeyRange

func (*StreamExecuteKeyRangesRequest) GetKeyspace

func (m *StreamExecuteKeyRangesRequest) GetKeyspace() string

func (*StreamExecuteKeyRangesRequest) GetOptions

func (*StreamExecuteKeyRangesRequest) GetQuery

func (*StreamExecuteKeyRangesRequest) GetTabletType

func (*StreamExecuteKeyRangesRequest) ProtoMessage

func (*StreamExecuteKeyRangesRequest) ProtoMessage()

func (*StreamExecuteKeyRangesRequest) Reset

func (m *StreamExecuteKeyRangesRequest) Reset()

func (*StreamExecuteKeyRangesRequest) String

type StreamExecuteKeyRangesResponse

type StreamExecuteKeyRangesResponse struct {
	// result contains the result data.
	// The first value contains only Fields information.
	// The next values contain the actual rows, a few values per result.
	Result *query.QueryResult `protobuf:"bytes,1,opt,name=result" json:"result,omitempty"`
}

StreamExecuteKeyRangesResponse is the returned value from StreamExecuteKeyRanges.

func (*StreamExecuteKeyRangesResponse) Descriptor

func (*StreamExecuteKeyRangesResponse) Descriptor() ([]byte, []int)

func (*StreamExecuteKeyRangesResponse) GetResult

func (*StreamExecuteKeyRangesResponse) ProtoMessage

func (*StreamExecuteKeyRangesResponse) ProtoMessage()

func (*StreamExecuteKeyRangesResponse) Reset

func (m *StreamExecuteKeyRangesResponse) Reset()

func (*StreamExecuteKeyRangesResponse) String

type StreamExecuteKeyspaceIdsRequest

type StreamExecuteKeyspaceIdsRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,2,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,3,opt,name=keyspace" json:"keyspace,omitempty"`
	// keyspace_ids contains the list of keyspace_ids affected by this query.
	// Will be used to find the shards to send the query to.
	KeyspaceIds [][]byte `protobuf:"bytes,4,rep,name=keyspace_ids,json=keyspaceIds,proto3" json:"keyspace_ids,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,5,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,6,opt,name=options" json:"options,omitempty"`
}

StreamExecuteKeyspaceIdsRequest is the payload to StreamExecuteKeyspaceIds.

func (*StreamExecuteKeyspaceIdsRequest) Descriptor

func (*StreamExecuteKeyspaceIdsRequest) Descriptor() ([]byte, []int)

func (*StreamExecuteKeyspaceIdsRequest) GetCallerId

func (*StreamExecuteKeyspaceIdsRequest) GetKeyspace

func (m *StreamExecuteKeyspaceIdsRequest) GetKeyspace() string

func (*StreamExecuteKeyspaceIdsRequest) GetKeyspaceIds

func (m *StreamExecuteKeyspaceIdsRequest) GetKeyspaceIds() [][]byte

func (*StreamExecuteKeyspaceIdsRequest) GetOptions

func (*StreamExecuteKeyspaceIdsRequest) GetQuery

func (*StreamExecuteKeyspaceIdsRequest) GetTabletType

func (*StreamExecuteKeyspaceIdsRequest) ProtoMessage

func (*StreamExecuteKeyspaceIdsRequest) ProtoMessage()

func (*StreamExecuteKeyspaceIdsRequest) Reset

func (*StreamExecuteKeyspaceIdsRequest) String

type StreamExecuteKeyspaceIdsResponse

type StreamExecuteKeyspaceIdsResponse struct {
	// result contains the result data.
	// The first value contains only Fields information.
	// The next values contain the actual rows, a few values per result.
	Result *query.QueryResult `protobuf:"bytes,1,opt,name=result" json:"result,omitempty"`
}

StreamExecuteKeyspaceIdsResponse is the returned value from StreamExecuteKeyspaceIds.

func (*StreamExecuteKeyspaceIdsResponse) Descriptor

func (*StreamExecuteKeyspaceIdsResponse) Descriptor() ([]byte, []int)

func (*StreamExecuteKeyspaceIdsResponse) GetResult

func (*StreamExecuteKeyspaceIdsResponse) ProtoMessage

func (*StreamExecuteKeyspaceIdsResponse) ProtoMessage()

func (*StreamExecuteKeyspaceIdsResponse) Reset

func (*StreamExecuteKeyspaceIdsResponse) String

type StreamExecuteRequest

type StreamExecuteRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,2,opt,name=query" json:"query,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,3,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// keyspace_shard can be 'keyspace' or 'keyspace/shard'.
	KeyspaceShard string `protobuf:"bytes,4,opt,name=keyspace_shard,json=keyspaceShard" json:"keyspace_shard,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,5,opt,name=options" json:"options,omitempty"`
}

StreamExecuteRequest is the payload to StreamExecute.

func (*StreamExecuteRequest) Descriptor

func (*StreamExecuteRequest) Descriptor() ([]byte, []int)

func (*StreamExecuteRequest) GetCallerId

func (m *StreamExecuteRequest) GetCallerId() *vtrpc.CallerID

func (*StreamExecuteRequest) GetKeyspaceShard

func (m *StreamExecuteRequest) GetKeyspaceShard() string

func (*StreamExecuteRequest) GetOptions

func (m *StreamExecuteRequest) GetOptions() *query.ExecuteOptions

func (*StreamExecuteRequest) GetQuery

func (m *StreamExecuteRequest) GetQuery() *query.BoundQuery

func (*StreamExecuteRequest) GetTabletType

func (m *StreamExecuteRequest) GetTabletType() topodata.TabletType

func (*StreamExecuteRequest) ProtoMessage

func (*StreamExecuteRequest) ProtoMessage()

func (*StreamExecuteRequest) Reset

func (m *StreamExecuteRequest) Reset()

func (*StreamExecuteRequest) String

func (m *StreamExecuteRequest) String() string

type StreamExecuteResponse

type StreamExecuteResponse struct {
	// result contains the result data.
	// The first value contains only Fields information.
	// The next values contain the actual rows, a few values per result.
	Result *query.QueryResult `protobuf:"bytes,1,opt,name=result" json:"result,omitempty"`
}

StreamExecuteResponse is the returned value from StreamExecute.

func (*StreamExecuteResponse) Descriptor

func (*StreamExecuteResponse) Descriptor() ([]byte, []int)

func (*StreamExecuteResponse) GetResult

func (m *StreamExecuteResponse) GetResult() *query.QueryResult

func (*StreamExecuteResponse) ProtoMessage

func (*StreamExecuteResponse) ProtoMessage()

func (*StreamExecuteResponse) Reset

func (m *StreamExecuteResponse) Reset()

func (*StreamExecuteResponse) String

func (m *StreamExecuteResponse) String() string

type StreamExecuteShardsRequest

type StreamExecuteShardsRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// query is the query and bind variables to execute.
	Query *query.BoundQuery `protobuf:"bytes,2,opt,name=query" json:"query,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,3,opt,name=keyspace" json:"keyspace,omitempty"`
	// shards to target the query to.
	Shards []string `protobuf:"bytes,4,rep,name=shards" json:"shards,omitempty"`
	// tablet_type is the type of tablets that this query is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,5,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// options
	Options *query.ExecuteOptions `protobuf:"bytes,6,opt,name=options" json:"options,omitempty"`
}

StreamExecuteShardsRequest is the payload to StreamExecuteShards.

func (*StreamExecuteShardsRequest) Descriptor

func (*StreamExecuteShardsRequest) Descriptor() ([]byte, []int)

func (*StreamExecuteShardsRequest) GetCallerId

func (m *StreamExecuteShardsRequest) GetCallerId() *vtrpc.CallerID

func (*StreamExecuteShardsRequest) GetKeyspace

func (m *StreamExecuteShardsRequest) GetKeyspace() string

func (*StreamExecuteShardsRequest) GetOptions

func (*StreamExecuteShardsRequest) GetQuery

func (*StreamExecuteShardsRequest) GetShards

func (m *StreamExecuteShardsRequest) GetShards() []string

func (*StreamExecuteShardsRequest) GetTabletType

func (m *StreamExecuteShardsRequest) GetTabletType() topodata.TabletType

func (*StreamExecuteShardsRequest) ProtoMessage

func (*StreamExecuteShardsRequest) ProtoMessage()

func (*StreamExecuteShardsRequest) Reset

func (m *StreamExecuteShardsRequest) Reset()

func (*StreamExecuteShardsRequest) String

func (m *StreamExecuteShardsRequest) String() string

type StreamExecuteShardsResponse

type StreamExecuteShardsResponse struct {
	// result contains the result data.
	// The first value contains only Fields information.
	// The next values contain the actual rows, a few values per result.
	Result *query.QueryResult `protobuf:"bytes,1,opt,name=result" json:"result,omitempty"`
}

StreamExecuteShardsResponse is the returned value from StreamExecuteShards.

func (*StreamExecuteShardsResponse) Descriptor

func (*StreamExecuteShardsResponse) Descriptor() ([]byte, []int)

func (*StreamExecuteShardsResponse) GetResult

func (*StreamExecuteShardsResponse) ProtoMessage

func (*StreamExecuteShardsResponse) ProtoMessage()

func (*StreamExecuteShardsResponse) Reset

func (m *StreamExecuteShardsResponse) Reset()

func (*StreamExecuteShardsResponse) String

func (m *StreamExecuteShardsResponse) String() string

type UpdateStreamRequest

type UpdateStreamRequest struct {
	// caller_id identifies the caller. This is the effective caller ID,
	// set by the application to further identify the caller.
	CallerId *vtrpc.CallerID `protobuf:"bytes,1,opt,name=caller_id,json=callerId" json:"caller_id,omitempty"`
	// keyspace to target the query to.
	Keyspace string `protobuf:"bytes,2,opt,name=keyspace" json:"keyspace,omitempty"`
	// shard to target the query to, for unsharded keyspaces.
	Shard string `protobuf:"bytes,3,opt,name=shard" json:"shard,omitempty"`
	// KeyRange to target the query to, for sharded keyspaces.
	KeyRange *topodata.KeyRange `protobuf:"bytes,4,opt,name=key_range,json=keyRange" json:"key_range,omitempty"`
	// tablet_type is the type of tablets that this request is targeted to.
	TabletType topodata.TabletType `protobuf:"varint,5,opt,name=tablet_type,json=tabletType,enum=topodata.TabletType" json:"tablet_type,omitempty"`
	// timestamp is the timestamp to start the stream from.  It is
	// unused is event is set, and we are only streaming from the shard
	// described by event.shard.
	Timestamp int64 `protobuf:"varint,6,opt,name=timestamp" json:"timestamp,omitempty"`
	// event is the event to start the stream from.
	// Note it is only used if we are streaming from exactly the same shard
	// as this event was coming from. Otherwise we can't use this event,
	// and will use the timestamp as a starting point.
	Event *query.EventToken `protobuf:"bytes,7,opt,name=event" json:"event,omitempty"`
}

UpdateStreamRequest is the payload to UpdateStream.

func (*UpdateStreamRequest) Descriptor

func (*UpdateStreamRequest) Descriptor() ([]byte, []int)

func (*UpdateStreamRequest) GetCallerId

func (m *UpdateStreamRequest) GetCallerId() *vtrpc.CallerID

func (*UpdateStreamRequest) GetEvent

func (m *UpdateStreamRequest) GetEvent() *query.EventToken

func (*UpdateStreamRequest) GetKeyRange

func (m *UpdateStreamRequest) GetKeyRange() *topodata.KeyRange

func (*UpdateStreamRequest) GetKeyspace

func (m *UpdateStreamRequest) GetKeyspace() string

func (*UpdateStreamRequest) GetShard

func (m *UpdateStreamRequest) GetShard() string

func (*UpdateStreamRequest) GetTabletType

func (m *UpdateStreamRequest) GetTabletType() topodata.TabletType

func (*UpdateStreamRequest) GetTimestamp

func (m *UpdateStreamRequest) GetTimestamp() int64

func (*UpdateStreamRequest) ProtoMessage

func (*UpdateStreamRequest) ProtoMessage()

func (*UpdateStreamRequest) Reset

func (m *UpdateStreamRequest) Reset()

func (*UpdateStreamRequest) String

func (m *UpdateStreamRequest) String() string

type UpdateStreamResponse

type UpdateStreamResponse struct {
	// event is one event from the stream.
	Event *query.StreamEvent `protobuf:"bytes,1,opt,name=event" json:"event,omitempty"`
	// resume_timestamp is the timestamp to resume streaming from if the
	// client is interrupted. If the Update Stream only goes to one
	// shard, this is equal to event.timestamp. If the Update Stream
	// goes to multiple shards and aggregates, this is the minimum value
	// of the current timestamp for all shards.
	ResumeTimestamp int64 `protobuf:"varint,2,opt,name=resume_timestamp,json=resumeTimestamp" json:"resume_timestamp,omitempty"`
}

UpdateStreamResponse is streamed by UpdateStream.

func (*UpdateStreamResponse) Descriptor

func (*UpdateStreamResponse) Descriptor() ([]byte, []int)

func (*UpdateStreamResponse) GetEvent

func (m *UpdateStreamResponse) GetEvent() *query.StreamEvent

func (*UpdateStreamResponse) GetResumeTimestamp

func (m *UpdateStreamResponse) GetResumeTimestamp() int64

func (*UpdateStreamResponse) ProtoMessage

func (*UpdateStreamResponse) ProtoMessage()

func (*UpdateStreamResponse) Reset

func (m *UpdateStreamResponse) Reset()

func (*UpdateStreamResponse) String

func (m *UpdateStreamResponse) String() string

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL