template

package
v1.0.7 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Sep 19, 2024 License: MPL-2.0 Imports: 5 Imported by: 186

README

sockaddr/template

sockaddr's template library. See the sockaddr/template docs for details on how to use this template.

Documentation

Overview

Package sockaddr/template provides a text/template interface the SockAddr helper functions. The primary entry point into the sockaddr/template package is through its Parse() call. For example:

import (
  "fmt"

  template "github.com/hashicorp/go-sockaddr/template"
)

results, err := template.Parse(`{{ GetPrivateIP }}`)
if err != nil {
  fmt.Errorf("Unable to find a private IP address: %v", err)
}
fmt.Printf("My Private IP address is: %s\n", results)

Below is a list of builtin template functions and details re: their usage. It is possible to add additional functions by calling ParseIfAddrsTemplate directly.

In general, the calling convention for this template library is to seed a list of initial interfaces via one of the Get*Interfaces() calls, then filter, sort, and extract the necessary attributes for use as string input. This template interface is primarily geared toward resolving specific values that are only available at runtime, but can be defined as a heuristic for execution when a config file is parsed.

All functions, unless noted otherwise, return an array of IfAddr structs making it possible to `sort`, `filter`, `limit`, seek (via the `offset` function), or `unique` the list. To extract useful string information, the `attr` and `join` functions return a single string value. See below for details.

Important note: see the https://github.com/hashicorp/go-sockaddr/tree/master/cmd/sockaddr utility for more examples and for a CLI utility to experiment with the template syntax.

`GetAllInterfaces` - Returns an exhaustive set of IfAddr structs available on the host. `GetAllInterfaces` is the initial input and accessible as the initial "dot" in the pipeline.

Example:

{{ GetAllInterfaces }}

`GetDefaultInterfaces` - Returns one IfAddr for every IP that is on the interface containing the default route for the host.

Example:

{{ GetDefaultInterfaces }}

`GetPrivateInterfaces` - Returns one IfAddr for every forwardable IP address that is included in RFC 6890 and whose interface is marked as up. NOTE: RFC 6890 is a more exhaustive version of RFC1918 because it spans IPv4 and IPv6, however, RFC6890 does permit the inclusion of likely undesired addresses such as multicast, therefore our version of "private" also filters out non-forwardable addresses.

Example:

{{ GetPrivateInterfaces | sort "default" | join "address" " " }}

`GetPublicInterfaces` - Returns a list of IfAddr structs whos IPs are forwardable, do not match RFC 6890, and whose interface is marked up.

Example:

{{ GetPublicInterfaces | sort "default" | join "name" " " }}

`GetPrivateIP` - Helper function that returns a string of the first IP address from GetPrivateInterfaces.

Example:

{{ GetPrivateIP }}

`GetPrivateIPs` - Helper function that returns a string of the all private IP addresses on the host.

Example:

{{ GetPrivateIPs }}

`GetPublicIP` - Helper function that returns a string of the first IP from GetPublicInterfaces.

Example:

{{ GetPublicIP }}

`GetPublicIPs` - Helper function that returns a space-delimited string of the all public IP addresses on the host.

Example:

{{ GetPrivateIPs }}

`GetInterfaceIP` - Helper function that returns a string of the first IP from the named interface.

Example:

{{ GetInterfaceIP "en0" }}

`GetInterfaceIPs` - Helper function that returns a space-delimited list of all IPs on a given interface.

Example:

{{ GetInterfaceIPs "en0" }}

`sort` - Sorts the IfAddrs result based on its arguments. `sort` takes one argument, a list of ways to sort its IfAddrs argument. The list of sort criteria is comma separated (`,`):

  • `address`, `+address`: Ascending sort of IfAddrs by Address
  • `-address`: Descending sort of IfAddrs by Address
  • `default`, `+default`: Ascending sort of IfAddrs, IfAddr with a default route first
  • `-default`: Descending sort of IfAddrs, IfAttr with default route last
  • `name`, `+name`: Ascending sort of IfAddrs by lexical ordering of interface name
  • `-name`: Descending sort of IfAddrs by lexical ordering of interface name
  • `port`, `+port`: Ascending sort of IfAddrs by port number
  • `-port`: Descending sort of IfAddrs by port number
  • `private`, `+private`: Ascending sort of IfAddrs with private addresses first
  • `-private`: Descending sort IfAddrs with private addresses last
  • `size`, `+size`: Ascending sort of IfAddrs by their network size as determined by their netmask (larger networks first)
  • `-size`: Descending sort of IfAddrs by their network size as determined by their netmask (smaller networks first)
  • `type`, `+type`: Ascending sort of IfAddrs by the type of the IfAddr (Unix, IPv4, then IPv6)
  • `-type`: Descending sort of IfAddrs by the type of the IfAddr (IPv6, IPv4, Unix)

Example:

{{ GetPrivateInterfaces | sort "default,-type,size,+address" }}

`exclude` and `include`: Filters IfAddrs based on the selector criteria and its arguments. Both `exclude` and `include` take two arguments. The list of available filtering criteria is:

  • "address": Filter IfAddrs based on a regexp matching the string representation of the address
  • "flag","flags": Filter IfAddrs based on the list of flags specified. Multiple flags can be passed together using the pipe character (`|`) to create an inclusive bitmask of flags. The list of flags is included below.
  • "name": Filter IfAddrs based on a regexp matching the interface name.
  • "network": Filter IfAddrs based on whether a netowkr is included in a given CIDR. More than one CIDR can be passed in if each network is separated by the pipe character (`|`).
  • "port": Filter IfAddrs based on an exact match of the port number (number must be expressed as a string)
  • "rfc", "rfcs": Filter IfAddrs based on the matching RFC. If more than one RFC is specified, the list of RFCs can be joined together using the pipe character (`|`).
  • "size": Filter IfAddrs based on the exact match of the mask size.
  • "type": Filter IfAddrs based on their SockAddr type. Multiple types can be specified together by using the pipe character (`|`). Valid types include: `ip`, `ipv4`, `ipv6`, and `unix`.

Example:

{{ GetPrivateInterfaces | exclude "type" "IPv6" }}

`unique`: Removes duplicate entries from the IfAddrs list, assuming the list has already been sorted. `unique` only takes one argument:

  • "address": Removes duplicates with the same address
  • "name": Removes duplicates with the same interface names

Example:

{{ GetAllInterfaces | sort "default,-type,address" | unique "name" }}

`limit`: Reduces the size of the list to the specified value.

Example:

{{ GetPrivateInterfaces | limit 1 }}

`offset`: Seeks into the list by the specified value. A negative value can be used to seek from the end of the list.

Example:

{{ GetPrivateInterfaces | offset "-2" | limit 1 }}

`math`: Perform a "math" operation on each member of the list and return new values. `math` takes two arguments, the attribute to operate on and the operation's value.

Supported operations include:

  • `address`: Adds the value, a positive or negative value expressed as a decimal string, to the address. The sign is required. This value is allowed to over or underflow networks (e.g. 127.255.255.255 `"address" "+1"` will return "128.0.0.0"). Addresses will wrap at IPv4 or IPv6 boundaries.
  • `network`: Add the value, a positive or negative value expressed as a decimal string, to the network address. The sign is required. Positive values are added to the network address. Negative values are subtracted from the network's broadcast address (e.g. 127.0.0.1 `"network" "-1"` will return "127.255.255.255"). Values that overflow the network size will safely wrap.
  • `mask`: Applies the given network mask to the address. The network mask is expressed as a decimal value (e.g. network mask "24" corresponds to `255.255.255.0`). After applying the network mask, the network mask of the resulting address will be either the applied network mask or the network mask of the input address depending on which network is larger (e.g. 192.168.10.20/24 `"mask" "16"` will return "192.168.0.0/16" but 192.168.10.20/24 `"mask" "28"` will return "192.168.10.16/24").

Example:

{{ GetPrivateInterfaces | include "type" "IP" | math "address" "+256" | attr "address" }}
{{ GetPrivateInterfaces | include "type" "IP" | math "address" "-256" | attr "address" }}
{{ GetPrivateInterfaces | include "type" "IP" | math "network" "+2" | attr "address" }}
{{ GetPrivateInterfaces | include "type" "IP" | math "network" "-2" | attr "address" }}
{{ GetPrivateInterfaces | include "type" "IP" | math "mask" "24" | attr "address" }}
{{ GetPrivateInterfaces | include "flags" "forwardable|up" | include "type" "IPv4" | math "network" "+2" | attr "address" }}

`attr`: Extracts a single attribute of the first member of the list and returns it as a string. `attr` takes a single attribute name. The list of available attributes is type-specific and shared between `join`. See below for a list of supported attributes.

Example:

{{ GetAllInterfaces | exclude "flags" "up" | attr "address" }}

`Attr`: Extracts a single attribute from an `IfAttr` and in every other way performs the same as the `attr`.

Example:

{{ with $ifAddrs := GetAllInterfaces | include "type" "IP" | sort "+type,+address" -}}
  {{- range $ifAddrs -}}
    {{- Attr "address" . }} -- {{ Attr "network" . }}/{{ Attr "size" . -}}
  {{- end -}}
{{- end }}

`join`: Similar to `attr`, `join` extracts all matching attributes of the list and returns them as a string joined by the separator, the second argument to `join`. The list of available attributes is type-specific and shared between `join`.

Example:

{{ GetAllInterfaces | include "flags" "forwardable" | join "address" " " }}

`exclude` and `include` flags:

  • `broadcast`
  • `down`: Is the interface down?
  • `forwardable`: Is the IP forwardable?
  • `global unicast`
  • `interface-local multicast`
  • `link-local multicast`
  • `link-local unicast`
  • `loopback`
  • `multicast`
  • `point-to-point`
  • `unspecified`: Is the IfAddr the IPv6 unspecified address?
  • `up`: Is the interface up?

Attributes for `attr`, `Attr`, and `join`:

SockAddr Type:

  • `string`
  • `type`

IPAddr Type:

  • `address`
  • `binary`
  • `first_usable`
  • `hex`
  • `host`
  • `last_usable`
  • `mask_bits`
  • `netmask`
  • `network`
  • `octets`: Decimal values per byte
  • `port`
  • `size`: Number of hosts in the network

IPv4Addr Type:

  • `broadcast`
  • `uint32`: unsigned integer representation of the value

IPv6Addr Type:

  • `uint128`: unsigned integer representation of the value

UnixSock Type:

  • `path`

Index

Constants

This section is empty.

Variables

View Source
var (
	// SourceFuncs is a map of all top-level functions that generate
	// sockaddr data types.
	SourceFuncs template.FuncMap

	// SortFuncs is a map of all functions used in sorting
	SortFuncs template.FuncMap

	// FilterFuncs is a map of all functions used in sorting
	FilterFuncs template.FuncMap

	// HelperFuncs is a map of all functions used in sorting
	HelperFuncs template.FuncMap
)

Functions

func Attr

func Attr(selectorName string, ifAddrsRaw interface{}) (string, error)

Attr returns the attribute from the ifAddrRaw argument. If the argument is an IfAddrs, only the first element will be evaluated for resolution.

func Parse

func Parse(input string) (string, error)

Parse parses input as template input using the addresses available on the host, then returns the string output if there are no errors.

func ParseIfAddrs

func ParseIfAddrs(input string, ifAddrs sockaddr.IfAddrs) (string, error)

ParseIfAddrs parses input as template input using the IfAddrs inputs, then returns the string output if there are no errors.

func ParseIfAddrsTemplate

func ParseIfAddrsTemplate(input string, ifAddrs sockaddr.IfAddrs, tmplIn *template.Template) (string, error)

ParseIfAddrsTemplate parses input as template input using the IfAddrs inputs, then returns the string output if there are no errors.

Types

This section is empty.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL