rmon2_mib

package
Version: v0.0.0-...-fac1166 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Oct 17, 2019 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

The MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757.

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type RMON2MIB

type RMON2MIB struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	ProtocolDir RMON2MIB_ProtocolDir

	AddressMap RMON2MIB_AddressMap

	ProbeConfig RMON2MIB_ProbeConfig

	// This table lists the protocols that this agent has the capability to decode
	// and count.  There is one entry in this table for each such protocol.  These
	// protocols represent different network layer, transport layer, and
	// higher-layer protocols.  The agent should boot up with this table
	// preconfigured with those protocols that it knows about and wishes to
	// monitor.  Implementations are strongly encouraged to support protocols
	// higher than the network layer (at least for the protocol distribution
	// group), even for implementations that don't support the application layer
	// groups.
	ProtocolDirTable RMON2MIB_ProtocolDirTable

	// Controls the setup of protocol type distribution statistics tables.
	// Implementations are encouraged to add an entry per monitored interface upon
	// initialization so that a default collection of protocol statistics is
	// available.  Rationale: This table controls collection of very basic
	// statistics for any or all of the protocols detected on a given interface.
	// An NMS can use this table to quickly determine bandwidth allocation
	// utilized by different protocols.  A media-specific statistics collection
	// could also be configured (e.g. etherStats, trPStats) to easily obtain total
	// frame, octet, and droppedEvents for the same interface.
	ProtocolDistControlTable RMON2MIB_ProtocolDistControlTable

	// An entry is made in this table for every protocol in the
	// protocolDirTable which has been seen in at least one packet. Counters are
	// updated in this table for every protocol type that is encountered when
	// parsing a packet, but no counters are updated for packets with MAC-layer
	// errors.  Note that if a protocolDirEntry is deleted, all associated entries
	// in this table are removed.
	ProtocolDistStatsTable RMON2MIB_ProtocolDistStatsTable

	// A table to control the collection of network layer address to physical
	// address to interface mappings.  Note that this is not like the typical RMON
	// controlTable and dataTable in which each entry creates its own data table.
	// Each entry in this table enables the discovery of addresses on a new
	// interface and the placement of address mappings into the central
	// addressMapTable.  Implementations are encouraged to add an entry per
	// monitored interface upon initialization so that a default collection of
	// address mappings is available.
	AddressMapControlTable RMON2MIB_AddressMapControlTable

	// A table of network layer address to physical address to interface mappings.
	// The probe will add entries to this table based on the source MAC and
	// network addresses seen in packets without MAC-level errors. The probe will
	// populate this table for all protocols in the protocol directory table whose
	// value of protocolDirAddressMapConfig is equal to supportedOn(3), and will
	// delete any entries whose protocolDirEntry is deleted or has a
	// protocolDirAddressMapConfig value of supportedOff(2).
	AddressMapTable RMON2MIB_AddressMapTable

	// A list of higher layer (i.e. non-MAC) host table control entries.  These
	// entries will enable the collection of the network and application level
	// host tables indexed by network addresses. Both the network and application
	// level host tables are controlled by this table is so that they will both be
	// created and deleted at the same time, further increasing the ease with
	// which they can be implemented as a single datastore (note that if an
	// implementation stores application layer host records in memory, it can
	// derive network layer host records from them).  Entries in the nlHostTable
	// will be created on behalf of each entry in this table. Additionally, if
	// this probe implements the alHostTable, entries in the alHostTable will be
	// created on behalf of each entry in this table.  Implementations are
	// encouraged to add an entry per monitored interface upon initialization so
	// that a default collection of host statistics is available.
	HlHostControlTable RMON2MIB_HlHostControlTable

	// A collection of statistics for a particular network layer address that has
	// been discovered on an interface of this device.  The probe will populate
	// this table for all network layer protocols in the protocol directory table
	// whose value of protocolDirHostConfig is equal to supportedOn(3), and will
	// delete any entries whose protocolDirEntry is deleted or has a
	// protocolDirHostConfig value of supportedOff(2).  The probe will add to this
	// table all addresses seen as the source or destination address in all
	// packets with no MAC errors, and will increment octet and packet counts in
	// the table for all packets with no MAC errors.
	NlHostTable RMON2MIB_NlHostTable

	// A list of higher layer (i.e. non-MAC) matrix control entries.  These
	// entries will enable the collection of the network and application level
	// matrix tables containing conversation statistics indexed by pairs of
	// network addresses. Both the network and application level matrix tables are
	// controlled by this table is so that they will both be created and deleted
	// at the same time, further increasing the ease with which they can be
	// implemented as a single datastore (note that if an implementation stores
	// application layer matrix records in memory, it can derive network layer
	// matrix records from them).  Entries in the nlMatrixSDTable and
	// nlMatrixDSTable will be created on behalf of each entry in this table.
	// Additionally, if this probe implements the alMatrix tables, entries in the
	// alMatrix tables will be created on behalf of each entry in this table.
	HlMatrixControlTable RMON2MIB_HlMatrixControlTable

	// A list of traffic matrix entries which collect statistics for conversations
	// between two network-level addresses.  This table is indexed first by the
	// source address and then by the destination address to make it convenient to
	// collect all conversations from a particular address.  The probe will
	// populate this table for all network layer protocols in the protocol
	// directory table whose value of protocolDirMatrixConfig is equal to
	// supportedOn(3), and will delete any entries whose protocolDirEntry is
	// deleted or has a protocolDirMatrixConfig value of supportedOff(2).      The
	// probe will add to this table all pairs of addresses seen in all packets
	// with no MAC errors, and will increment octet and packet counts in the table
	// for all packets with no MAC errors.  Further, this table will only contain
	// entries that have a corresponding entry in the nlMatrixDSTable with the
	// same source address and destination address.
	NlMatrixSDTable RMON2MIB_NlMatrixSDTable

	// A list of traffic matrix entries which collect statistics for conversations
	// between two network-level addresses.  This table is indexed first by the
	// destination address and then by the source address to make it convenient to
	// collect all conversations to a particular address.  The probe will populate
	// this table for all network layer protocols in the protocol directory table
	// whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will
	// delete any entries whose protocolDirEntry is deleted or has a
	// protocolDirMatrixConfig value of supportedOff(2).  The probe will add to
	// this table all pairs of addresses seen in all packets with no MAC errors,
	// and will increment      octet and packet counts in the table for all
	// packets with no MAC errors.  Further, this table will only contain entries
	// that have a corresponding entry in the nlMatrixSDTable with the same source
	// address and destination address.
	NlMatrixDSTable RMON2MIB_NlMatrixDSTable

	// A set of parameters that control the creation of a report of the top N
	// matrix entries according to a selected metric.
	NlMatrixTopNControlTable RMON2MIB_NlMatrixTopNControlTable

	// A set of statistics for those network layer matrix entries that have
	// counted the highest number of octets or packets.
	NlMatrixTopNTable RMON2MIB_NlMatrixTopNTable

	// A collection of statistics for a particular protocol from a particular
	// network address that has been discovered on an interface of this device.
	// The probe will populate this table for all protocols in the protocol
	// directory table whose value of protocolDirHostConfig is equal to
	// supportedOn(3), and will delete any entries whose protocolDirEntry is
	// deleted or has a protocolDirHostConfig value of supportedOff(2).  The probe
	// will add to this table all addresses seen as the source or destination
	// address in all packets with no MAC errors, and will increment octet and
	// packet counts in the table for all packets with no MAC errors.  Further,
	// entries will only be added to this table if their address exists in the
	// nlHostTable and will be deleted from this table if their address is deleted
	// from the nlHostTable.
	AlHostTable RMON2MIB_AlHostTable

	// A list of application traffic matrix entries which collect      statistics
	// for conversations of a particular protocol between two network-level
	// addresses.  This table is indexed first by the source address and then by
	// the destination address to make it convenient to collect all statistics
	// from a particular address.  The probe will populate this table for all
	// protocols in the protocol directory table whose value of
	// protocolDirMatrixConfig is equal to supportedOn(3), and will delete any
	// entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig
	// value of supportedOff(2).  The probe will add to this table all pairs of
	// addresses for all protocols seen in all packets with no MAC errors, and
	// will increment octet and packet counts in the table for all packets with no
	// MAC errors.  Further, entries will only be added to this table if their
	// address pair exists in the nlMatrixSDTable and will be deleted from this
	// table if the address pair is deleted from the nlMatrixSDTable.
	AlMatrixSDTable RMON2MIB_AlMatrixSDTable

	// A list of application traffic matrix entries which collect statistics for
	// conversations of a particular protocol between two network-level addresses.
	// This table is indexed first by the destination address and then by the
	// source address to make it convenient to collect all statistics to a
	// particular address.  The probe will populate this table for all protocols
	// in the protocol directory table whose value of protocolDirMatrixConfig is
	// equal to supportedOn(3), and will delete any entries whose protocolDirEntry
	// is deleted or has a protocolDirMatrixConfig value of supportedOff(2).  The
	// probe will add to this table all pairs of addresses for all protocols seen
	// in all packets with no MAC errors, and will increment octet and packet
	// counts in the table for all packets with no MAC errors.  Further, entries
	// will only be added to this table if their address pair exists in the
	// nlMatrixDSTable and will be deleted from this table if the address pair is
	// deleted from the nlMatrixDSTable.
	AlMatrixDSTable RMON2MIB_AlMatrixDSTable

	// A set of parameters that control the creation of a report of the top N
	// matrix entries according to a selected metric.
	AlMatrixTopNControlTable RMON2MIB_AlMatrixTopNControlTable

	// A set of statistics for those application layer matrix entries that have
	// counted the highest number of octets or packets.
	AlMatrixTopNTable RMON2MIB_AlMatrixTopNTable

	// A list of data-collection configuration entries.
	UsrHistoryControlTable RMON2MIB_UsrHistoryControlTable

	// A list of data-collection configuration entries.
	UsrHistoryObjectTable RMON2MIB_UsrHistoryObjectTable

	// A list of user defined history entries.
	UsrHistoryTable RMON2MIB_UsrHistoryTable

	// A table of serial interface configuration entries.  This data will be
	// stored in non-volatile memory and preserved across probe resets or power
	// loss.
	SerialConfigTable RMON2MIB_SerialConfigTable

	// A table of netConfigEntries.
	NetConfigTable RMON2MIB_NetConfigTable

	// A list of trap destination entries.
	TrapDestTable RMON2MIB_TrapDestTable

	// A list of serialConnectionEntries.
	SerialConnectionTable RMON2MIB_SerialConnectionTable
}

RMON2MIB

func (*RMON2MIB) GetEntityData

func (rMON2MIB *RMON2MIB) GetEntityData() *types.CommonEntityData

type RMON2MIB_AddressMap

type RMON2MIB_AddressMap struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The number of times an address mapping entry has been inserted into the
	// addressMapTable.  If an entry is inserted, then deleted, and then inserted,
	// this counter will be incremented by 2.  Note that the table size can be
	// determined by subtracting addressMapDeletes from addressMapInserts. The
	// type is interface{} with range: 0..4294967295.
	AddressMapInserts interface{}

	// The number of times an address mapping entry has been deleted from the
	// addressMapTable (for any reason).  If an entry is deleted, then inserted,
	// and then deleted, this counter will be incremented by 2.  Note that the
	// table size can be determined by subtracting addressMapDeletes from
	// addressMapInserts. The type is interface{} with range: 0..4294967295.
	AddressMapDeletes interface{}

	// The maximum number of entries that are desired in the addressMapTable. The
	// probe will not create more than this number of entries in the table, but
	// may choose to create fewer entries in this table for any reason including
	// the lack of resources.  If this object is set to a value less than the
	// current number of entries, enough entries are chosen in an
	// implementation-dependent manner and deleted so that the number of entries
	// in the table equals the value of this object.  If this value is set to -1,
	// the probe may create any number of entries in this table.  This object may
	// be used to control how resources are allocated on the probe for the various
	// RMON functions. The type is interface{} with range: -1..2147483647.
	AddressMapMaxDesiredEntries interface{}
}

RMON2MIB_AddressMap

func (*RMON2MIB_AddressMap) GetEntityData

func (addressMap *RMON2MIB_AddressMap) GetEntityData() *types.CommonEntityData

type RMON2MIB_AddressMapControlTable

type RMON2MIB_AddressMapControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the addressMapControlTable.      An example of the
	// indexing of this entry is addressMapControlDroppedFrames.1. The type is
	// slice of RMON2MIB_AddressMapControlTable_AddressMapControlEntry.
	AddressMapControlEntry []*RMON2MIB_AddressMapControlTable_AddressMapControlEntry
}

RMON2MIB_AddressMapControlTable A table to control the collection of network layer address to physical address to interface mappings.

Note that this is not like the typical RMON controlTable and dataTable in which each entry creates its own data table. Each entry in this table enables the discovery of addresses on a new interface and the placement of address mappings into the central addressMapTable.

Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of address mappings is available.

func (*RMON2MIB_AddressMapControlTable) GetEntityData

func (addressMapControlTable *RMON2MIB_AddressMapControlTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_AddressMapControlTable_AddressMapControlEntry

type RMON2MIB_AddressMapControlTable_AddressMapControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A unique index for this entry in the
	// addressMapControlTable. The type is interface{} with range: 1..65535.
	AddressMapControlIndex interface{}

	// The source of data for this addressMapControlEntry. The type is string with
	// pattern: (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	AddressMapControlDataSource interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe is out of some resources and decides to shed load
	// from this collection.  This count does not include packets that were not
	// counted because they had MAC-layer errors.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	AddressMapControlDroppedFrames interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	AddressMapControlOwner interface{}

	// The status of this addressMap control entry.  An entry may not exist in the
	// active state unless all objects in the entry have an appropriate value.  If
	// this object is not equal to active(1), all associated entries in the
	// addressMapTable shall be deleted. The type is RowStatus.
	AddressMapControlStatus interface{}
}

RMON2MIB_AddressMapControlTable_AddressMapControlEntry A conceptual row in the addressMapControlTable.

An example of the indexing of this entry is addressMapControlDroppedFrames.1

func (*RMON2MIB_AddressMapControlTable_AddressMapControlEntry) GetEntityData

func (addressMapControlEntry *RMON2MIB_AddressMapControlTable_AddressMapControlEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_AddressMapTable

type RMON2MIB_AddressMapTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the addressMapTable. The protocolDirLocalIndex in the
	// index identifies the network layer protocol of the
	// addressMapNetworkAddress.      An example of the indexing of this entry is
	// addressMapSource.783495.18.4.128.2.6.6.11.1.3.6.1.2.1.2.2.1.1.1. The type
	// is slice of RMON2MIB_AddressMapTable_AddressMapEntry.
	AddressMapEntry []*RMON2MIB_AddressMapTable_AddressMapEntry
}

RMON2MIB_AddressMapTable A table of network layer address to physical address to interface mappings.

The probe will add entries to this table based on the source MAC and network addresses seen in packets without MAC-level errors. The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirAddressMapConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirAddressMapConfig value of supportedOff(2).

func (*RMON2MIB_AddressMapTable) GetEntityData

func (addressMapTable *RMON2MIB_AddressMapTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_AddressMapTable_AddressMapEntry

type RMON2MIB_AddressMapTable_AddressMapEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A TimeFilter for this entry.  See the TimeFilter
	// textual convention to see how this works. The type is interface{} with
	// range: 0..4294967295.
	AddressMapTimeMark interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex interface{}

	// This attribute is a key. The network address for this relation.  This is
	// represented as an octet string with specific semantics and length as
	// identified by the protocolDirLocalIndex component of the index.  For
	// example, if the protocolDirLocalIndex indicates an encapsulation of ip,
	// this object is encoded as a length octet of 4, followed by the 4 octets of
	// the ip address, in network byte order. The type is string.
	AddressMapNetworkAddress interface{}

	// This attribute is a key. The interface or port on which the associated
	// network address was most recently seen.      If this address mapping was
	// discovered on an interface, this object shall identify the instance of the
	// ifIndex object, defined in [3,5], for the desired interface. For example,
	// if an entry were to receive data from interface #1, this object would be
	// set to ifIndex.1.  If this address mapping was discovered on a port, this
	// object shall identify the instance of the rptrGroupPortIndex object,
	// defined in [RFC1516], for the desired port. For example, if an entry were
	// to receive data from group #1, port #1, this object would be set to
	// rptrGroupPortIndex.1.1.  Note that while the dataSource associated with
	// this entry may only point to index objects, this object may at times point
	// to repeater port objects. This situation occurs when the dataSource points
	// to an interface which is a locally attached repeater and the agent has
	// additional information about the source port of traffic seen on that
	// repeater. The type is string with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	AddressMapSource interface{}

	// The last source physical address on which the associated network address
	// was seen.  If the protocol of the associated network address was
	// encapsulated inside of a network-level or higher protocol, this will be the
	// address of the next-lower protocol with the addressRecognitionCapable bit
	// enabled and will be formatted as specified for that protocol. The type is
	// string.
	AddressMapPhysicalAddress interface{}

	// The value of sysUpTime at the time this entry was last created or the
	// values of the physical address changed.  This can be used to help detect
	// duplicate address problems, in which case this object will be updated
	// frequently. The type is interface{} with range: 0..4294967295.
	AddressMapLastChange interface{}
}

RMON2MIB_AddressMapTable_AddressMapEntry A conceptual row in the addressMapTable. The protocolDirLocalIndex in the index identifies the network layer protocol of the addressMapNetworkAddress.

An example of the indexing of this entry is addressMapSource.783495.18.4.128.2.6.6.11.1.3.6.1.2.1.2.2.1.1.1

func (*RMON2MIB_AddressMapTable_AddressMapEntry) GetEntityData

func (addressMapEntry *RMON2MIB_AddressMapTable_AddressMapEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlHostTable

type RMON2MIB_AlHostTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the alHostTable.  The hlHostControlIndex value in the
	// index identifies the hlHostControlEntry on whose behalf this entry was
	// created. The first protocolDirLocalIndex value in the index identifies the
	// network layer protocol of the address. The nlHostAddress value in the index
	// identifies the network layer address of this entry. The second
	// protocolDirLocalIndex value in the index identifies the protocol that is
	// counted by this entry.  An example of the indexing in this entry is
	// alHostOutPkts.1.783495.18.4.128.2.6.6.34. The type is slice of
	// RMON2MIB_AlHostTable_AlHostEntry.
	AlHostEntry []*RMON2MIB_AlHostTable_AlHostEntry
}

RMON2MIB_AlHostTable A collection of statistics for a particular protocol from a particular network address that has been discovered on an interface of this device.

The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2).

The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address exists in the nlHostTable and will be deleted from this table if their address is deleted from the nlHostTable.

func (*RMON2MIB_AlHostTable) GetEntityData

func (alHostTable *RMON2MIB_AlHostTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlHostTable_AlHostEntry

type RMON2MIB_AlHostTable_AlHostEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_HlHostControlTable_HlHostControlEntry_HlHostControlIndex
	HlHostControlIndex interface{}

	// This attribute is a key. A TimeFilter for this entry.  See the TimeFilter
	// textual convention to see how this works. The type is interface{} with
	// range: 0..4294967295.
	AlHostTimeMark interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex interface{}

	// This attribute is a key. The type is string. Refers to
	// rmon2_mib.RMON2MIB_NlHostTable_NlHostEntry_NlHostAddress
	NlHostAddress interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex2 interface{}

	// The number of packets of this protocol type without errors transmitted to
	// this address since it was added to the alHostTable.  Note that this is the
	// number of link-layer packets, so if a single network-layer packet is
	// fragmented into several link-layer frames, this counter is incremented
	// several times. The type is interface{} with range: 0..4294967295.
	AlHostInPkts interface{}

	// The number of packets of this protocol type without errors transmitted by
	// this address since it was added to the alHostTable.  Note that this is the
	// number of link-layer packets, so if a single network-layer packet is
	// fragmented into several link-layer frames, this counter is incremented
	// several times. The type is interface{} with range: 0..4294967295.
	AlHostOutPkts interface{}

	// The number of octets transmitted to this address of this protocol type
	// since it was added to the alHostTable (excluding framing bits but including
	// FCS octets), excluding those octets in packets that contained errors.  Note
	// this doesn't count just those octets in the particular protocol frames, but
	// includes the entire packet that contained the protocol. The type is
	// interface{} with range: 0..4294967295.
	AlHostInOctets interface{}

	// The number of octets transmitted by this address of this protocol type
	// since it was added to the alHostTable (excluding framing bits but including
	// FCS octets), excluding those octets in packets that contained errors.  Note
	// this doesn't count just those octets in the particular protocol frames, but
	// includes the entire packet that contained the protocol. The type is
	// interface{} with range: 0..4294967295.
	AlHostOutOctets interface{}

	// The value of sysUpTime when this entry was last activated. This can be used
	// by the management station to ensure that the entry has not been deleted and
	// recreated between polls. The type is interface{} with range: 0..4294967295.
	AlHostCreateTime interface{}
}

RMON2MIB_AlHostTable_AlHostEntry A conceptual row in the alHostTable.

The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network layer protocol of the address. The nlHostAddress value in the index identifies the network layer address of this entry. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry.

An example of the indexing in this entry is alHostOutPkts.1.783495.18.4.128.2.6.6.34

func (*RMON2MIB_AlHostTable_AlHostEntry) GetEntityData

func (alHostEntry *RMON2MIB_AlHostTable_AlHostEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlMatrixDSTable

type RMON2MIB_AlMatrixDSTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the alMatrixDSTable.  The hlMatrixControlIndex value in
	// the index identifies the hlMatrixControlEntry on whose behalf this entry
	// was created. The first protocolDirLocalIndex value in the index identifies
	// the network layer protocol of the alMatrixDSSourceAddress and
	// alMatrixDSDestAddress.      The nlMatrixDSDestAddress value in the index
	// identifies the network layer address of the destination host in this
	// conversation. The nlMatrixDSSourceAddress value in the index identifies the
	// network layer address of the source host in this conversation. The second
	// protocolDirLocalIndex value in the index identifies the protocol that is
	// counted by this entry.  An example of the indexing of this entry is
	// alMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.34. The type is slice of
	// RMON2MIB_AlMatrixDSTable_AlMatrixDSEntry.
	AlMatrixDSEntry []*RMON2MIB_AlMatrixDSTable_AlMatrixDSEntry
}

RMON2MIB_AlMatrixDSTable A list of application traffic matrix entries which collect statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all statistics to a particular address.

The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2).

The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixDSTable and will be deleted from this table if the address pair is deleted from the nlMatrixDSTable.

func (*RMON2MIB_AlMatrixDSTable) GetEntityData

func (alMatrixDSTable *RMON2MIB_AlMatrixDSTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlMatrixDSTable_AlMatrixDSEntry

type RMON2MIB_AlMatrixDSTable_AlMatrixDSEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry_HlMatrixControlIndex
	HlMatrixControlIndex interface{}

	// This attribute is a key. A TimeFilter for this entry.  See the TimeFilter
	// textual convention to see how this works. The type is interface{} with
	// range: 0..4294967295.
	AlMatrixDSTimeMark interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex interface{}

	// This attribute is a key. The type is string. Refers to
	// rmon2_mib.RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry_NlMatrixDSDestAddress
	NlMatrixDSDestAddress interface{}

	// This attribute is a key. The type is string. Refers to
	// rmon2_mib.RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry_NlMatrixDSSourceAddress
	NlMatrixDSSourceAddress interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex2 interface{}

	// The number of packets of this protocol type without errors transmitted from
	// the source address to the destination address since this entry was added to
	// the alMatrixDSTable.  Note that this is the number of link-layer packets,
	// so if a single network-layer packet is fragmented into several link-layer
	// frames, this counter is incremented several times. The type is interface{}
	// with range: 0..4294967295.
	AlMatrixDSPkts interface{}

	// The number of octets in packets of this protocol type transmitted from the
	// source address to the destination address since this entry was added to the
	// alMatrixDSTable (excluding framing bits but including FCS octets),
	// excluding those octets in packets that contained errors.  Note this doesn't
	// count just those octets in the particular protocol frames, but includes the
	// entire packet that contained the protocol. The type is interface{} with
	// range: 0..4294967295.
	AlMatrixDSOctets interface{}

	// The value of sysUpTime when this entry was last activated. This can be used
	// by the management station to ensure that the entry has not been deleted and
	// recreated between polls. The type is interface{} with range: 0..4294967295.
	AlMatrixDSCreateTime interface{}
}

RMON2MIB_AlMatrixDSTable_AlMatrixDSEntry A conceptual row in the alMatrixDSTable.

The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network layer protocol of the alMatrixDSSourceAddress and alMatrixDSDestAddress.

The nlMatrixDSDestAddress value in the index identifies the network layer address of the destination host in this conversation. The nlMatrixDSSourceAddress value in the index identifies the network layer address of the source host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry.

An example of the indexing of this entry is alMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6.34

func (*RMON2MIB_AlMatrixDSTable_AlMatrixDSEntry) GetEntityData

func (alMatrixDSEntry *RMON2MIB_AlMatrixDSTable_AlMatrixDSEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlMatrixSDTable

type RMON2MIB_AlMatrixSDTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the alMatrixSDTable.  The hlMatrixControlIndex value in
	// the index identifies the hlMatrixControlEntry on whose behalf this entry
	// was created. The first protocolDirLocalIndex value in the index identifies
	// the network layer protocol of the nlMatrixSDSourceAddress and
	// nlMatrixSDDestAddress. The nlMatrixSDSourceAddress value in the index
	// identifies the network layer address of the source host in this
	// conversation. The nlMatrixSDDestAddress value in the index identifies the
	// network layer address of the destination host in this conversation. The
	// second protocolDirLocalIndex value in the index identifies the protocol
	// that is counted by this entry.  An example of the indexing of this entry is
	// alMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.34. The type is slice of
	// RMON2MIB_AlMatrixSDTable_AlMatrixSDEntry.
	AlMatrixSDEntry []*RMON2MIB_AlMatrixSDTable_AlMatrixSDEntry
}

RMON2MIB_AlMatrixSDTable A list of application traffic matrix entries which collect

statistics for conversations of a particular protocol between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all statistics from a particular address.

The probe will populate this table for all protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2).

The probe will add to this table all pairs of addresses for all protocols seen in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors. Further, entries will only be added to this table if their address pair exists in the nlMatrixSDTable and will be deleted from this table if the address pair is deleted from the nlMatrixSDTable.

func (*RMON2MIB_AlMatrixSDTable) GetEntityData

func (alMatrixSDTable *RMON2MIB_AlMatrixSDTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlMatrixSDTable_AlMatrixSDEntry

type RMON2MIB_AlMatrixSDTable_AlMatrixSDEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry_HlMatrixControlIndex
	HlMatrixControlIndex interface{}

	// This attribute is a key. A TimeFilter for this entry.  See the TimeFilter
	// textual convention to see how this works. The type is interface{} with
	// range: 0..4294967295.
	AlMatrixSDTimeMark interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex interface{}

	// This attribute is a key. The type is string. Refers to
	// rmon2_mib.RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry_NlMatrixSDSourceAddress
	NlMatrixSDSourceAddress interface{}

	// This attribute is a key. The type is string. Refers to
	// rmon2_mib.RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry_NlMatrixSDDestAddress
	NlMatrixSDDestAddress interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex2 interface{}

	// The number of packets of this protocol type without errors transmitted from
	// the source address to the destination address since this entry was added to
	// the alMatrixSDTable.  Note that this is the number of link-layer packets,
	// so if a single network-layer packet is fragmented into several link-layer
	// frames, this counter is incremented several times. The type is interface{}
	// with range: 0..4294967295.
	AlMatrixSDPkts interface{}

	// The number of octets in packets of this protocol type transmitted from the
	// source address to the destination address since this entry was added to the
	// alMatrixSDTable (excluding framing bits but including FCS octets),
	// excluding those octets in packets that contained errors.  Note this doesn't
	// count just those octets in the particular protocol frames, but includes the
	// entire packet that contained the protocol. The type is interface{} with
	// range: 0..4294967295.
	AlMatrixSDOctets interface{}

	// The value of sysUpTime when this entry was last activated. This can be used
	// by the management station to ensure that the entry has not been deleted and
	// recreated between polls. The type is interface{} with range: 0..4294967295.
	AlMatrixSDCreateTime interface{}
}

RMON2MIB_AlMatrixSDTable_AlMatrixSDEntry A conceptual row in the alMatrixSDTable.

The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The first protocolDirLocalIndex value in the index identifies the network layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress. The nlMatrixSDSourceAddress value in the index identifies the network layer address of the source host in this conversation. The nlMatrixSDDestAddress value in the index identifies the network layer address of the destination host in this conversation. The second protocolDirLocalIndex value in the index identifies the protocol that is counted by this entry.

An example of the indexing of this entry is alMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7.34

func (*RMON2MIB_AlMatrixSDTable_AlMatrixSDEntry) GetEntityData

func (alMatrixSDEntry *RMON2MIB_AlMatrixSDTable_AlMatrixSDEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlMatrixTopNControlTable

type RMON2MIB_AlMatrixTopNControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the alMatrixTopNControlTable.  An example of the
	// indexing of this table is alMatrixTopNControlDuration.3. The type is slice
	// of RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry.
	AlMatrixTopNControlEntry []*RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry
}

RMON2MIB_AlMatrixTopNControlTable A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.

func (*RMON2MIB_AlMatrixTopNControlTable) GetEntityData

func (alMatrixTopNControlTable *RMON2MIB_AlMatrixTopNControlTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry

type RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// alMatrixTopNControlTable.  Each such entry defines one top N report
	// prepared for one interface. The type is interface{} with range: 1..65535.
	AlMatrixTopNControlIndex interface{}

	// The alMatrix[SD/DS] table for which a top N report will be prepared on
	// behalf of this entry.  The alMatrix[SD/DS] table is identified by the value
	// of the hlMatrixControlIndex for that table - that value is used here to
	// identify the particular table.  This object may not be modified if the
	// associated alMatrixTopNControlStatus object is equal to active(1). The type
	// is interface{} with range: 1..65535.
	AlMatrixTopNControlMatrixIndex interface{}

	// The variable for each alMatrix[SD/DS] entry that the
	// alMatrixTopNEntries are sorted by, as well as the selector of the view of
	// the matrix table that will be used.  The values alMatrixTopNTerminalsPkts
	// and alMatrixTopNTerminalsOctets cause collection only from protocols that
	// have no child protocols that are counted.  The values alMatrixTopNAllPkts
	// and alMatrixTopNAllOctets cause collection from all alMatrix entries.  This
	// object may not be modified if the associated alMatrixTopNControlStatus
	// object is equal to active(1). The type is AlMatrixTopNControlRateBase.
	AlMatrixTopNControlRateBase interface{}

	// The number of seconds left in the report currently being collected.  When
	// this object is modified by the management station, a new collection is
	// started, possibly aborting a currently running report.  The new value is
	// used as the requested duration of this report, and is immediately loaded
	// into the associated alMatrixTopNControlDuration object. When the report
	// finishes, the probe will automatically start another collection with the
	// same initial value of alMatrixTopNControlTimeRemaining.  Thus the
	// management station may simply read the resulting reports repeatedly,
	// checking the startTime and duration each time to ensure that a report was
	// not missed or that the report parameters were not changed.  While the value
	// of this object is non-zero, it decrements by one per second until it
	// reaches zero.  At the time that this object decrements to zero, the report
	// is made accessible in the alMatrixTopNTable, overwriting any report that
	// may be there.  When this object is modified by the management station, any
	// associated entries in the alMatrixTopNTable shall be deleted.  (Note that
	// this is a different algorithm than the one used in the hostTopNTable). The
	// type is interface{} with range: 0..2147483647.
	AlMatrixTopNControlTimeRemaining interface{}

	// The number of reports that have been generated by this entry. The type is
	// interface{} with range: 0..4294967295.
	AlMatrixTopNControlGeneratedReports interface{}

	// The number of seconds that this report has collected during the last
	// sampling interval.  When the associated alMatrixTopNControlTimeRemaining
	// object is set, this object shall be set by the probe to the same value and
	// shall not be modified until the next time the
	// alMatrixTopNControlTimeRemaining is set.  This value shall be zero if no
	// reports have been requested for this alMatrixTopNControlEntry. The type is
	// interface{} with range: -2147483648..2147483647.
	AlMatrixTopNControlDuration interface{}

	// The maximum number of matrix entries requested for this report.  When this
	// object is created or modified, the probe should set
	// alMatrixTopNControlGrantedSize as closely to this object as is possible for
	// the particular probe implementation and available resources. The type is
	// interface{} with range: 0..2147483647.
	AlMatrixTopNControlRequestedSize interface{}

	// The maximum number of matrix entries in this report.  When the associated
	// alMatrixTopNControlRequestedSize object is created or modified, the probe
	// should set this      object as closely to the requested value as is
	// possible for the particular implementation and available resources. The
	// probe must not lower this value except as a result of a set to the
	// associated alMatrixTopNControlRequestedSize object.  If the value of
	// alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or
	// alMatrixTopNAllPkts, when the next topN report is generated, matrix entries
	// with the highest value of alMatrixTopNPktRate shall be placed in this table
	// in decreasing order of this rate until there is no more room or until there
	// are no more matrix entries.  If the value of alMatrixTopNControlRateBase is
	// equal to alMatrixTopNTerminalsOctets or alMatrixTopNAllOctets, when the
	// next topN report is generated, matrix entries with the highest value of
	// alMatrixTopNOctetRate shall be placed in this table in decreasing order of
	// this rate until there is no more room or until there are no more matrix
	// entries.  It is an implementation-specific matter how entries with the same
	// value of alMatrixTopNPktRate or alMatrixTopNOctetRate are sorted.  It is
	// also an implementation-specific matter as to whether or not zero-valued
	// entries are available. The type is interface{} with range: 0..2147483647.
	AlMatrixTopNControlGrantedSize interface{}

	// The value of sysUpTime when this top N report was last started.  In other
	// words, this is the time that the associated
	// alMatrixTopNControlTimeRemaining object was modified to start the requested
	// report or the time the report was last automatically (re)started.  This
	// object may be used by the management station to determine if a report was
	// missed or not. The type is interface{} with range: 0..4294967295.
	AlMatrixTopNControlStartTime interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	AlMatrixTopNControlOwner interface{}

	// The status of this alMatrixTopNControlEntry.  An entry may not exist in the
	// active state unless all objects in the entry have an appropriate value.  If
	// this object is not equal to active(1), all associated entries in the
	// alMatrixTopNTable shall be deleted by the agent. The type is RowStatus.
	AlMatrixTopNControlStatus interface{}
}

RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry A conceptual row in the alMatrixTopNControlTable.

An example of the indexing of this table is alMatrixTopNControlDuration.3

func (*RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry) GetEntityData

func (alMatrixTopNControlEntry *RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase

type RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase string

RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase represents alMatrixTopNControlStatus object is equal to active(1).

const (
	RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase_alMatrixTopNTerminalsPkts RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase = "alMatrixTopNTerminalsPkts"

	RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase_alMatrixTopNTerminalsOctets RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase = "alMatrixTopNTerminalsOctets"

	RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase_alMatrixTopNAllPkts RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase = "alMatrixTopNAllPkts"

	RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase_alMatrixTopNAllOctets RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlRateBase = "alMatrixTopNAllOctets"
)

type RMON2MIB_AlMatrixTopNTable

type RMON2MIB_AlMatrixTopNTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the alMatrixTopNTable.  The alMatrixTopNControlIndex
	// value in the index identifies the alMatrixTopNControlEntry on whose behalf
	// this entry was created.  An example of the indexing of this table is
	// alMatrixTopNPktRate.3.10. The type is slice of
	// RMON2MIB_AlMatrixTopNTable_AlMatrixTopNEntry.
	AlMatrixTopNEntry []*RMON2MIB_AlMatrixTopNTable_AlMatrixTopNEntry
}

RMON2MIB_AlMatrixTopNTable A set of statistics for those application layer matrix entries that have counted the highest number of octets or packets.

func (*RMON2MIB_AlMatrixTopNTable) GetEntityData

func (alMatrixTopNTable *RMON2MIB_AlMatrixTopNTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_AlMatrixTopNTable_AlMatrixTopNEntry

type RMON2MIB_AlMatrixTopNTable_AlMatrixTopNEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_AlMatrixTopNControlTable_AlMatrixTopNControlEntry_AlMatrixTopNControlIndex
	AlMatrixTopNControlIndex interface{}

	// This attribute is a key. An index that uniquely identifies an entry in the
	// alMatrixTopNTable among those in the same report. This index is between 1
	// and N, where N is the number of entries in this report.  If the value of
	// alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or
	// alMatrixTopNAllPkts, increasing values of alMatrixTopNIndex shall be
	// assigned to entries with decreasing values of alMatrixTopNPktRate until
	// index N is assigned or there are no more alMatrixTopNEntries.  If the value
	// of alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsOctets or
	// alMatrixTopNAllOctets, increasing values of alMatrixTopNIndex shall be
	// assigned to entries with decreasing values of alMatrixTopNOctetRate until
	// index N is assigned or there are no more alMatrixTopNEntries. The type is
	// interface{} with range: 1..65535.
	AlMatrixTopNIndex interface{}

	// The protocolDirLocalIndex of the network layer protocol of this entry's
	// network address. The type is interface{} with range: 1..2147483647.
	AlMatrixTopNProtocolDirLocalIndex interface{}

	// The network layer address of the source host in this conversation. This is
	// represented as an octet string with specific semantics and length as
	// identified      by the associated alMatrixTopNProtocolDirLocalIndex.  For
	// example, if the alMatrixTopNProtocolDirLocalIndex indicates an
	// encapsulation of ip, this object is encoded as a length octet of 4,
	// followed by the 4 octets of the ip address, in network byte order. The type
	// is string.
	AlMatrixTopNSourceAddress interface{}

	// The network layer address of the destination host in this conversation.
	// This is represented as an octet string with specific semantics and length
	// as identified by the associated alMatrixTopNProtocolDirLocalIndex.  For
	// example, if the alMatrixTopNProtocolDirLocalIndex indicates an
	// encapsulation of ip, this object is encoded as a length octet of 4,
	// followed by the 4 octets of the ip address, in network byte order. The type
	// is string.
	AlMatrixTopNDestAddress interface{}

	// The type of the protocol counted by this matrix entry. The type is
	// interface{} with range: 1..2147483647.
	AlMatrixTopNAppProtocolDirLocalIndex interface{}

	// The number of packets seen of this protocol from the source host to the
	// destination host during this sampling interval, counted using the rules for
	// counting the alMatrixSDPkts object.  If the value of
	// alMatrixTopNControlRateBase is alMatrixTopNTerminalsPkts or
	// alMatrixTopNAllPkts, this variable will be used to sort this report. The
	// type is interface{} with range: 0..4294967295.
	AlMatrixTopNPktRate interface{}

	// The number of packets seen of this protocol from the destination host to
	// the source host during this sampling interval, counted using the rules for
	// counting the alMatrixDSPkts object  (note that the corresponding
	// alMatrixSDPkts object selected is the one whose source address is equal to
	// alMatrixTopNDestAddress and whose destination address is equal to
	// alMatrixTopNSourceAddress.)  Note that if the value of
	// alMatrixTopNControlRateBase is equal to alMatrixTopNTerminalsPkts or
	// alMatrixTopNAllPkts, the sort of topN entries is based entirely on
	// alMatrixTopNPktRate, and not on the value of this object. The type is
	// interface{} with range: 0..4294967295.
	AlMatrixTopNReversePktRate interface{}

	// The number of octets seen of this protocol from the source host to the
	// destination host during this sampling interval, counted using the rules for
	// counting the alMatrixSDOctets object.  If the value of
	// alMatrixTopNControlRateBase is alMatrixTopNTerminalsOctets or
	// alMatrixTopNAllOctets, this variable will be used to sort this report. The
	// type is interface{} with range: 0..4294967295.
	AlMatrixTopNOctetRate interface{}

	// The number of octets seen of this protocol from the destination host to the
	// source host during this sampling interval, counted using the rules for
	// counting the alMatrixDSOctets object  (note that the corresponding
	// alMatrixSDOctets object selected is the one whose source address is equal
	// to alMatrixTopNDestAddress and whose destination address is equal to
	// alMatrixTopNSourceAddress.)  Note that if the value of
	// alMatrixTopNControlRateBase is equal      to alMatrixTopNTerminalsOctets or
	// alMatrixTopNAllOctets, the sort of topN entries is based entirely on
	// alMatrixTopNOctetRate, and not on the value of this object. The type is
	// interface{} with range: 0..4294967295.
	AlMatrixTopNReverseOctetRate interface{}
}

RMON2MIB_AlMatrixTopNTable_AlMatrixTopNEntry A conceptual row in the alMatrixTopNTable.

The alMatrixTopNControlIndex value in the index identifies the alMatrixTopNControlEntry on whose behalf this entry was created.

An example of the indexing of this table is alMatrixTopNPktRate.3.10

func (*RMON2MIB_AlMatrixTopNTable_AlMatrixTopNEntry) GetEntityData

func (alMatrixTopNEntry *RMON2MIB_AlMatrixTopNTable_AlMatrixTopNEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_HlHostControlTable

type RMON2MIB_HlHostControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the hlHostControlTable.  An example of the indexing of
	// this entry is hlHostControlNlDroppedFrames.1. The type is slice of
	// RMON2MIB_HlHostControlTable_HlHostControlEntry.
	HlHostControlEntry []*RMON2MIB_HlHostControlTable_HlHostControlEntry
}

RMON2MIB_HlHostControlTable A list of higher layer (i.e. non-MAC) host table control entries.

These entries will enable the collection of the network and application level host tables indexed by network addresses. Both the network and application level host tables are controlled by this table is so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore (note that if an implementation stores application layer host records in memory, it can derive network layer host records from them).

Entries in the nlHostTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alHostTable, entries in the alHostTable will be created on behalf of each entry in this table.

Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of host statistics is available.

func (*RMON2MIB_HlHostControlTable) GetEntityData

func (hlHostControlTable *RMON2MIB_HlHostControlTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_HlHostControlTable_HlHostControlEntry

type RMON2MIB_HlHostControlTable_HlHostControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// hlHostControlTable.  Each such entry defines a function that discovers
	// hosts on a particular interface and places statistics about them in the
	// nlHostTable, and optionally in the alHostTable, on behalf of this
	// hlHostControlEntry. The type is interface{} with range: 1..65535.
	HlHostControlIndex interface{}

	// The source of data for the associated host tables.  The statistics in this
	// group reflect all packets on the local network segment attached to the
	// identified interface.  This object may not be modified if the associated
	// hlHostControlStatus object is equal to active(1). The type is string with
	// pattern: (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	HlHostControlDataSource interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for the associated      nlHost entries for whatever reason.
	// Most often, this event occurs when the probe is out of some resources and
	// decides to shed load from this collection.  This count does not include
	// packets that were not counted because they had MAC-layer errors.  Note that
	// if the nlHostTable is inactive because no protocols are enabled in the
	// protocol directory, this value should be 0.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	HlHostControlNlDroppedFrames interface{}

	// The number of times an nlHost entry has been inserted into the nlHost
	// table.  If an entry is inserted, then deleted, and then inserted, this
	// counter will be incremented by 2.  To allow for efficient implementation
	// strategies, agents may delay updating this object for short periods of
	// time.  For example, an implementation strategy may allow internal data
	// structures to differ from those visible via SNMP for short periods of time.
	// This counter may reflect the internal data structures for those short
	// periods of time.  Note that the table size can be determined by subtracting
	// hlHostControlNlDeletes from hlHostControlNlInserts. The type is interface{}
	// with range: 0..4294967295.
	HlHostControlNlInserts interface{}

	// The number of times an nlHost entry has been deleted from the nlHost table
	// (for any reason).  If an entry is deleted, then inserted, and then deleted,
	// this counter will be incremented by 2.  To allow for efficient
	// implementation strategies, agents may delay updating this object for short
	// periods of time.  For example, an implementation strategy may allow
	// internal      data structures to differ from those visible via SNMP for
	// short periods of time.  This counter may reflect the internal data
	// structures for those short periods of time.  Note that the table size can
	// be determined by subtracting hlHostControlNlDeletes from
	// hlHostControlNlInserts. The type is interface{} with range: 0..4294967295.
	HlHostControlNlDeletes interface{}

	// The maximum number of entries that are desired in the nlHostTable on behalf
	// of this control entry. The probe will not create more than this number of
	// associated entries in the table, but may choose to create fewer entries in
	// this table for any reason including the lack of resources.  If this object
	// is set to a value less than the current number of entries, enough entries
	// are chosen in an implementation-dependent manner and deleted so that the
	// number of entries in the table equals the value of this object.  If this
	// value is set to -1, the probe may create any number of entries in this
	// table.  If the associated hlHostControlStatus object is equal to `active',
	// this object may not be modified.  This object may be used to control how
	// resources are allocated on the probe for the various RMON functions. The
	// type is interface{} with range: -1..2147483647.
	HlHostControlNlMaxDesiredEntries interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for the associated alHost entries for whatever reason.  Most
	// often, this event occurs when the probe is out of some resources and
	// decides to shed load from this collection.  This count does not include
	// packets that were not counted because they had MAC-layer errors.       Note
	// that if the alHostTable is not implemented or is inactive because no
	// protocols are enabled in the protocol directory, this value should be 0.
	// Note that, unlike the dropEvents counter, this number is the exact number
	// of frames dropped. The type is interface{} with range: 0..4294967295.
	HlHostControlAlDroppedFrames interface{}

	// The number of times an alHost entry has been inserted into the alHost
	// table.  If an entry is inserted, then deleted, and then inserted, this
	// counter will be incremented by 2.  To allow for efficient implementation
	// strategies, agents may delay updating this object for short periods of
	// time.  For example, an implementation strategy may allow internal data
	// structures to differ from those visible via SNMP for short periods of time.
	// This counter may reflect the internal data structures for those short
	// periods of time.  Note that the table size can be determined by subtracting
	// hlHostControlAlDeletes from hlHostControlAlInserts. The type is interface{}
	// with range: 0..4294967295.
	HlHostControlAlInserts interface{}

	// The number of times an alHost entry has been deleted from the alHost table
	// (for any reason).  If an entry is deleted, then inserted, and then deleted,
	// this counter will be incremented by 2.  To allow for efficient
	// implementation strategies, agents may delay updating this object for short
	// periods of time.  For example, an implementation strategy may allow
	// internal data structures to differ from those visible via SNMP for short
	// periods of time.  This counter may reflect the internal data structures for
	// those short periods of time.  Note that the table size can be determined by
	// subtracting hlHostControlAlDeletes from hlHostControlAlInserts. The type is
	// interface{} with range: 0..4294967295.
	HlHostControlAlDeletes interface{}

	// The maximum number of entries that are desired in the alHost table on
	// behalf of this control entry. The probe will not create more than this
	// number of associated entries in the table, but may choose to create fewer
	// entries in this table for any reason including the lack of resources.  If
	// this object is set to a value less than the current number of entries,
	// enough entries are chosen in an implementation-dependent manner and deleted
	// so that the number of entries in the table equals the value of this object.
	// If this value is set to -1, the probe may create any number of entries in
	// this table.  If the associated hlHostControlStatus object is equal to
	// `active', this object may not be modified.  This object may be used to
	// control how resources are allocated on the probe for the various RMON
	// functions. The type is interface{} with range: -1..2147483647.
	HlHostControlAlMaxDesiredEntries interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	HlHostControlOwner interface{}

	// The status of this hlHostControlEntry.  An entry may not exist in the
	// active state unless all objects in the entry have an appropriate value.  If
	// this object is not equal to active(1), all associated entries in the
	// nlHostTable and alHostTable shall be deleted. The type is RowStatus.
	HlHostControlStatus interface{}
}

RMON2MIB_HlHostControlTable_HlHostControlEntry A conceptual row in the hlHostControlTable.

An example of the indexing of this entry is hlHostControlNlDroppedFrames.1

func (*RMON2MIB_HlHostControlTable_HlHostControlEntry) GetEntityData

func (hlHostControlEntry *RMON2MIB_HlHostControlTable_HlHostControlEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_HlMatrixControlTable

type RMON2MIB_HlMatrixControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the hlMatrixControlTable.  An example of indexing of
	// this entry is hlMatrixControlNlDroppedFrames.1. The type is slice of
	// RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry.
	HlMatrixControlEntry []*RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry
}

RMON2MIB_HlMatrixControlTable A list of higher layer (i.e. non-MAC) matrix control entries.

These entries will enable the collection of the network and application level matrix tables containing conversation statistics indexed by pairs of network addresses. Both the network and application level matrix tables are controlled by this table is so that they will both be created and deleted at the same time, further increasing the ease with which they can be implemented as a single datastore (note that if an implementation stores application layer matrix records in memory, it can derive network layer matrix records from them).

Entries in the nlMatrixSDTable and nlMatrixDSTable will be created on behalf of each entry in this table. Additionally, if this probe implements the alMatrix tables, entries in the alMatrix tables will be created on behalf of each entry in this table.

func (*RMON2MIB_HlMatrixControlTable) GetEntityData

func (hlMatrixControlTable *RMON2MIB_HlMatrixControlTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry

type RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// hlMatrixControlTable.  Each such entry defines a function that discovers
	// conversations on a particular interface and places statistics about them in
	// the nlMatrixSDTable and the nlMatrixDSTable, and optionally the
	// alMatrixSDTable and alMatrixDSTable, on behalf of this
	// hlMatrixControlEntry. The type is interface{} with range: 1..65535.
	HlMatrixControlIndex interface{}

	// The source of the data for the associated matrix tables.  The statistics in
	// this group reflect all packets on the local network segment attached to the
	// identified interface.  This object may not be modified if the associated
	// hlMatrixControlStatus object is equal to active(1). The type is string with
	// pattern: (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	HlMatrixControlDataSource interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe is out of some resources and decides to shed load
	// from this collection.  This count does not include packets that were not
	// counted because they had MAC-layer errors.  Note that if the nlMatrixTables
	// are inactive because no protocols are enabled in the protocol directory,
	// this value should be 0.  Note that, unlike the dropEvents counter, this
	// number is the exact number of frames dropped. The type is interface{} with
	// range: 0..4294967295.
	HlMatrixControlNlDroppedFrames interface{}

	// The number of times an nlMatrix entry has been inserted into the nlMatrix
	// tables.  If an entry is inserted, then deleted, and then inserted, this
	// counter will be incremented by 2.  The addition of a conversation into both
	// the nlMatrixSDTable and nlMatrixDSTable shall be counted as two insertions
	// (even though every addition into one table must be accompanied by an
	// insertion into the other).  To allow for efficient implementation
	// strategies, agents may delay updating this object for short periods of
	// time.  For example, an implementation strategy may allow internal data
	// structures to differ from those visible via SNMP for short periods of time.
	// This counter may reflect the internal data structures for those short
	// periods of time.      Note that the sum of then nlMatrixSDTable and
	// nlMatrixDSTable sizes can be determined by subtracting
	// hlMatrixControlNlDeletes from hlMatrixControlNlInserts. The type is
	// interface{} with range: 0..4294967295.
	HlMatrixControlNlInserts interface{}

	// The number of times an nlMatrix entry has been deleted from the nlMatrix
	// tables (for any reason).  If an entry is deleted, then inserted, and then
	// deleted, this counter will be incremented by 2.  The deletion of a
	// conversation from both the nlMatrixSDTable and nlMatrixDSTable shall be
	// counted as two deletions (even though every deletion from one table must be
	// accompanied by a deletion from the other).  To allow for efficient
	// implementation strategies, agents may delay updating this object for short
	// periods of time.  For example, an implementation strategy may allow
	// internal data structures to differ from those visible via SNMP for short
	// periods of time.  This counter may reflect the internal data structures for
	// those short periods of time.  Note that the table size can be determined by
	// subtracting hlMatrixControlNlDeletes from hlMatrixControlNlInserts. The
	// type is interface{} with range: 0..4294967295.
	HlMatrixControlNlDeletes interface{}

	// The maximum number of entries that are desired in the nlMatrix tables on
	// behalf of this control entry. The probe will not create more than this
	// number of associated entries in the table, but may choose to create fewer
	// entries in this table for any reason including the lack of resources.  If
	// this object is set to a value less than the current number of entries,
	// enough entries are chosen in an implementation-dependent manner and deleted
	// so that the number of entries in the table equals the value of this object.
	// If this value is set to -1, the probe may create any number of entries in
	// this table.  If the associated      hlMatrixControlStatus object is equal
	// to `active', this object may not be modified.  This object may be used to
	// control how resources are allocated on the probe for the various RMON
	// functions. The type is interface{} with range: -1..2147483647.
	HlMatrixControlNlMaxDesiredEntries interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe is out of some resources and decides to shed load
	// from this collection.  This count does not include packets that were not
	// counted because they had MAC-layer errors.  Note that if the alMatrixTables
	// are not implemented or are inactive because no protocols are enabled in the
	// protocol directory, this value should be 0.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	HlMatrixControlAlDroppedFrames interface{}

	// The number of times an alMatrix entry has been inserted into the alMatrix
	// tables.  If an entry is inserted, then deleted, and then inserted, this
	// counter will be incremented by 2.  The addition of a conversation into both
	// the alMatrixSDTable and alMatrixDSTable shall be counted as two insertions
	// (even though every addition into one table must be accompanied by an
	// insertion into the other).  To allow for efficient implementation
	// strategies, agents may delay updating this object for short periods of
	// time.  For example, an implementation strategy may allow internal data
	// structures to differ from those visible via SNMP for short periods of time.
	// This counter may reflect the internal      data structures for those short
	// periods of time.  Note that the table size can be determined by subtracting
	// hlMatrixControlAlDeletes from hlMatrixControlAlInserts. The type is
	// interface{} with range: 0..4294967295.
	HlMatrixControlAlInserts interface{}

	// The number of times an alMatrix entry has been deleted from the alMatrix
	// tables.  If an entry is deleted, then inserted, and then deleted, this
	// counter will be incremented by 2.  The deletion of a conversation from both
	// the alMatrixSDTable and alMatrixDSTable shall be counted as two deletions
	// (even though every deletion from one table must be accompanied by a
	// deletion from the other).  To allow for efficient implementation
	// strategies, agents may delay updating this object for short periods of
	// time.  For example, an implementation strategy may allow internal data
	// structures to differ from those visible via SNMP for short periods of time.
	// This counter may reflect the internal data structures for those short
	// periods of time.  Note that the table size can be determined by subtracting
	// hlMatrixControlAlDeletes from hlMatrixControlAlInserts. The type is
	// interface{} with range: 0..4294967295.
	HlMatrixControlAlDeletes interface{}

	// The maximum number of entries that are desired in the alMatrix tables on
	// behalf of this control entry. The probe will not create more than this
	// number of associated entries in the table, but may choose to create fewer
	// entries in this table for any reason including the lack of resources.  If
	// this object is set to a value less than the current number of entries,
	// enough entries are chosen in an implementation-dependent manner and deleted
	// so that the number of entries in the table equals the value of this object.
	// If this value is set to -1, the probe may create any number of entries in
	// this table.  If the associated      hlMatrixControlStatus object is equal
	// to `active', this object may not be modified.  This object may be used to
	// control how resources are allocated on the probe for the various RMON
	// functions. The type is interface{} with range: -1..2147483647.
	HlMatrixControlAlMaxDesiredEntries interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	HlMatrixControlOwner interface{}

	// The status of this hlMatrixControlEntry.  An entry may not exist in the
	// active state unless all objects in the entry have an appropriate value.  If
	// this object is not equal to active(1), all associated entries in the
	// nlMatrixSDTable, nlMatrixDSTable, alMatrixSDTable, and the alMatrixDSTable
	// shall be deleted by the agent. The type is RowStatus.
	HlMatrixControlStatus interface{}
}

RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry A conceptual row in the hlMatrixControlTable.

An example of indexing of this entry is hlMatrixControlNlDroppedFrames.1

func (*RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry) GetEntityData

func (hlMatrixControlEntry *RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_NetConfigTable

type RMON2MIB_NetConfigTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of configuration parameters for a particular network interface on
	// this device. If the device has no network interface, this table is empty.
	// The index is composed of the ifIndex assigned to the corresponding
	// interface. The type is slice of RMON2MIB_NetConfigTable_NetConfigEntry.
	NetConfigEntry []*RMON2MIB_NetConfigTable_NetConfigEntry
}

RMON2MIB_NetConfigTable A table of netConfigEntries.

func (*RMON2MIB_NetConfigTable) GetEntityData

func (netConfigTable *RMON2MIB_NetConfigTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_NetConfigTable_NetConfigEntry

type RMON2MIB_NetConfigTable_NetConfigEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range:
	// -2147483648..2147483647. Refers to
	// rfc1213_mib.RFC1213MIB_IfTable_IfEntry_IfIndex
	IfIndex interface{}

	// The IP address of this Net interface.  The default value for this object is
	// 0.0.0.0.  If either the netConfigIPAddress or netConfigSubnetMask are
	// 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out
	// what these values should be. If BOOTP fails, before the device can talk on
	// the network, this value must be configured (e.g., through a terminal
	// attached to the device). If BOOTP is      used, care should be taken to not
	// send BOOTP broadcasts too frequently and to eventually send very
	// infrequently if no replies are received. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	NetConfigIPAddress interface{}

	// The subnet mask of this Net interface.  The default value for this object
	// is 0.0.0.0.  If either the netConfigIPAddress or netConfigSubnetMask are
	// 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out
	// what these values should be. If BOOTP fails, before the device can talk on
	// the network, this value must be configured (e.g., through a terminal
	// attached to the device). If BOOTP is used, care should be taken to not send
	// BOOTP broadcasts too frequently and to eventually send very infrequently if
	// no replies are received. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	NetConfigSubnetMask interface{}

	// The status of this netConfigEntry.  An entry may not exist in the active
	// state unless all objects in the entry have an appropriate value. The type
	// is RowStatus.
	NetConfigStatus interface{}
}

RMON2MIB_NetConfigTable_NetConfigEntry A set of configuration parameters for a particular network interface on this device. If the device has no network interface, this table is empty.

The index is composed of the ifIndex assigned to the corresponding interface.

func (*RMON2MIB_NetConfigTable_NetConfigEntry) GetEntityData

func (netConfigEntry *RMON2MIB_NetConfigTable_NetConfigEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlHostTable

type RMON2MIB_NlHostTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the nlHostTable.  The hlHostControlIndex value in the
	// index identifies the hlHostControlEntry on whose behalf this entry was
	// created. The protocolDirLocalIndex value in the index identifies the
	// network layer protocol of the nlHostAddress.  An example of the indexing of
	// this entry is nlHostOutPkts.1.783495.18.4.128.2.6.6. The type is slice of
	// RMON2MIB_NlHostTable_NlHostEntry.
	NlHostEntry []*RMON2MIB_NlHostTable_NlHostEntry
}

RMON2MIB_NlHostTable A collection of statistics for a particular network layer address that has been discovered on an interface of this device.

The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirHostConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirHostConfig value of supportedOff(2).

The probe will add to this table all addresses seen as the source or destination address in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors.

func (*RMON2MIB_NlHostTable) GetEntityData

func (nlHostTable *RMON2MIB_NlHostTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlHostTable_NlHostEntry

type RMON2MIB_NlHostTable_NlHostEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_HlHostControlTable_HlHostControlEntry_HlHostControlIndex
	HlHostControlIndex interface{}

	// This attribute is a key. A TimeFilter for this entry.  See the TimeFilter
	// textual convention to see how this works. The type is interface{} with
	// range: 0..4294967295.
	NlHostTimeMark interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex interface{}

	// This attribute is a key. The network address for this nlHostEntry.  This is
	// represented as an octet string with specific semantics and length as
	// identified by the protocolDirLocalIndex component of the index.  For
	// example, if the protocolDirLocalIndex indicates an encapsulation of ip,
	// this object is encoded as a length octet of 4, followed by the 4 octets of
	// the ip address, in network byte order. The type is string.
	NlHostAddress interface{}

	// The number of packets without errors transmitted to this address since it
	// was added to the nlHostTable.  Note that this is the number of link-layer
	// packets, so if a single network-layer packet is fragmented into several
	// link-layer frames, this counter is incremented several times. The type is
	// interface{} with range: 0..4294967295.
	NlHostInPkts interface{}

	// The number of packets without errors transmitted by      this address since
	// it was added to the nlHostTable.  Note that this is the number of
	// link-layer packets, so if a single network-layer packet is fragmented into
	// several link-layer frames, this counter is incremented several times. The
	// type is interface{} with range: 0..4294967295.
	NlHostOutPkts interface{}

	// The number of octets transmitted to this address since it was added to the
	// nlHostTable (excluding framing bits but including FCS octets), excluding
	// those octets in packets that contained errors.  Note this doesn't count
	// just those octets in the particular protocol frames, but includes the
	// entire packet that contained the protocol. The type is interface{} with
	// range: 0..4294967295.
	NlHostInOctets interface{}

	// The number of octets transmitted by this address since it was added to the
	// nlHostTable (excluding framing bits but including FCS octets), excluding
	// those octets in packets that contained errors.  Note this doesn't count
	// just those octets in the particular protocol frames, but includes the
	// entire packet that contained the protocol. The type is interface{} with
	// range: 0..4294967295.
	NlHostOutOctets interface{}

	// The number of packets without errors transmitted by this address that were
	// directed to any MAC broadcast addresses or to any MAC multicast addresses
	// since this host was added to the nlHostTable. Note that this is the number
	// of link-layer packets, so if a single network-layer packet is fragmented
	// into several link-layer frames, this counter is incremented several times.
	// The type is interface{} with range: 0..4294967295.
	NlHostOutMacNonUnicastPkts interface{}

	// The value of sysUpTime when this entry was last activated. This can be used
	// by the management station to ensure that the entry has not been deleted and
	// recreated between polls. The type is interface{} with range: 0..4294967295.
	NlHostCreateTime interface{}
}

RMON2MIB_NlHostTable_NlHostEntry A conceptual row in the nlHostTable.

The hlHostControlIndex value in the index identifies the hlHostControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network layer protocol of the nlHostAddress.

An example of the indexing of this entry is nlHostOutPkts.1.783495.18.4.128.2.6.6.

func (*RMON2MIB_NlHostTable_NlHostEntry) GetEntityData

func (nlHostEntry *RMON2MIB_NlHostTable_NlHostEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlMatrixDSTable

type RMON2MIB_NlMatrixDSTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the nlMatrixDSTable.  The hlMatrixControlIndex value in
	// the index identifies the hlMatrixControlEntry on whose behalf this entry
	// was created. The protocolDirLocalIndex value in the index identifies the
	// network layer protocol of the nlMatrixDSSourceAddress and
	// nlMatrixDSDestAddress.  An example of the indexing of this table is
	// nlMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6. The type is slice of
	// RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry.
	NlMatrixDSEntry []*RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry
}

RMON2MIB_NlMatrixDSTable A list of traffic matrix entries which collect statistics for conversations between two network-level addresses. This table is indexed first by the destination address and then by the source address to make it convenient to collect all conversations to a particular address.

The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2).

The probe will add to this table all pairs of addresses seen in all packets with no MAC errors, and will increment

octet and packet counts in the table for all packets with no MAC errors.

Further, this table will only contain entries that have a corresponding entry in the nlMatrixSDTable with the same source address and destination address.

func (*RMON2MIB_NlMatrixDSTable) GetEntityData

func (nlMatrixDSTable *RMON2MIB_NlMatrixDSTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry

type RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry_HlMatrixControlIndex
	HlMatrixControlIndex interface{}

	// This attribute is a key. A TimeFilter for this entry.  See the TimeFilter
	// textual convention to see how this works. The type is interface{} with
	// range: 0..4294967295.
	NlMatrixDSTimeMark interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex interface{}

	// This attribute is a key. The network destination address for this
	// nlMatrixDSEntry.  This is represented as an octet string with specific
	// semantics and length as identified by the protocolDirLocalIndex component
	// of the index.  For example, if the protocolDirLocalIndex indicates an
	// encapsulation of ip, this object is encoded as a length octet of 4,
	// followed by the 4 octets of the ip address, in network byte order. The type
	// is string.
	NlMatrixDSDestAddress interface{}

	// This attribute is a key. The network source address for this
	// nlMatrixDSEntry.  This is represented as an octet string with specific
	// semantics and length as identified by the protocolDirLocalIndex component
	// of the index.  For example, if the protocolDirLocalIndex indicates an
	// encapsulation of ip, this object is encoded as a length octet of 4,
	// followed by the 4 octets of the ip address, in network byte order. The type
	// is string.
	NlMatrixDSSourceAddress interface{}

	// The number of packets without errors transmitted from the source address to
	// the destination address since this entry was added to the nlMatrixDSTable.
	// Note that this is the number of link-layer packets, so if a single
	// network-layer packet is fragmented into several link-layer frames, this
	// counter is incremented several times. The type is interface{} with range:
	// 0..4294967295.
	NlMatrixDSPkts interface{}

	// The number of octets transmitted from the source address to the destination
	// address since this entry was added to the nlMatrixDSTable (excluding
	// framing bits but including FCS octets), excluding those octets in packets
	// that contained errors.  Note this doesn't count just those octets in the
	// particular protocol frames, but includes the entire packet that contained
	// the protocol. The type is interface{} with range: 0..4294967295.
	NlMatrixDSOctets interface{}

	// The value of sysUpTime when this entry was last activated. This can be used
	// by the management station to ensure that the entry has not been deleted and
	// recreated between polls. The type is interface{} with range: 0..4294967295.
	NlMatrixDSCreateTime interface{}
}

RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry A conceptual row in the nlMatrixDSTable.

The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network layer protocol of the nlMatrixDSSourceAddress and nlMatrixDSDestAddress.

An example of the indexing of this table is nlMatrixDSPkts.1.783495.18.4.128.2.6.7.4.128.2.6.6

func (*RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry) GetEntityData

func (nlMatrixDSEntry *RMON2MIB_NlMatrixDSTable_NlMatrixDSEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlMatrixSDTable

type RMON2MIB_NlMatrixSDTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the nlMatrixSDTable.  The hlMatrixControlIndex value in
	// the index identifies the hlMatrixControlEntry on whose behalf this entry
	// was created. The protocolDirLocalIndex value in the index identifies the
	// network layer protocol of the nlMatrixSDSourceAddress and
	// nlMatrixSDDestAddress.  An example of the indexing of this table is
	// nlMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7. The type is slice of
	// RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry.
	NlMatrixSDEntry []*RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry
}

RMON2MIB_NlMatrixSDTable A list of traffic matrix entries which collect statistics for conversations between two network-level addresses. This table is indexed first by the source address and then by the destination address to make it convenient to collect all conversations from a particular address.

The probe will populate this table for all network layer protocols in the protocol directory table whose value of protocolDirMatrixConfig is equal to supportedOn(3), and will delete any entries whose protocolDirEntry is deleted or has a protocolDirMatrixConfig value of supportedOff(2).

The probe will add to this table all pairs of addresses seen in all packets with no MAC errors, and will increment octet and packet counts in the table for all packets with no MAC errors.

Further, this table will only contain entries that have a corresponding entry in the nlMatrixDSTable with the same source address and destination address.

func (*RMON2MIB_NlMatrixSDTable) GetEntityData

func (nlMatrixSDTable *RMON2MIB_NlMatrixSDTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry

type RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_HlMatrixControlTable_HlMatrixControlEntry_HlMatrixControlIndex
	HlMatrixControlIndex interface{}

	// This attribute is a key. A TimeFilter for this entry.  See the TimeFilter
	// textual convention to see how this works. The type is interface{} with
	// range: 0..4294967295.
	NlMatrixSDTimeMark interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex interface{}

	// This attribute is a key. The network source address for this
	// nlMatrixSDEntry.  This is represented as an octet string with specific
	// semantics and length as identified by the protocolDirLocalIndex component
	// of the index.  For example, if the protocolDirLocalIndex indicates an
	// encapsulation of ip, this object is encoded as a length octet of 4,
	// followed by the 4 octets of the ip address, in network byte order. The type
	// is string.
	NlMatrixSDSourceAddress interface{}

	// This attribute is a key. The network destination address for this
	// nlMatrixSDEntry.  This is represented as an octet string with specific
	// semantics and length as identified by the protocolDirLocalIndex component
	// of the index.  For example, if the protocolDirLocalIndex indicates an
	// encapsulation of ip, this object is encoded as a length octet of 4,
	// followed by the 4 octets of the ip address, in network byte order. The type
	// is string.
	NlMatrixSDDestAddress interface{}

	// The number of packets without errors transmitted from the source address to
	// the destination address since this entry was added to the nlMatrixSDTable.
	// Note that this is the number of link-layer packets, so if a single
	// network-layer packet is fragmented into several link-layer frames, this
	// counter is incremented several times. The type is interface{} with range:
	// 0..4294967295.
	NlMatrixSDPkts interface{}

	// The number of octets transmitted from the source address to the destination
	// address since this entry was added to the nlMatrixSDTable (excluding
	// framing bits but including FCS octets), excluding those octets in packets
	// that contained errors.  Note this doesn't count just those octets in the
	// particular protocol frames, but includes the entire packet that contained
	// the protocol. The type is interface{} with range: 0..4294967295.
	NlMatrixSDOctets interface{}

	// The value of sysUpTime when this entry was last activated. This can be used
	// by the management station to ensure that the entry has not been deleted and
	// recreated between polls. The type is interface{} with range: 0..4294967295.
	NlMatrixSDCreateTime interface{}
}

RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry A conceptual row in the nlMatrixSDTable.

The hlMatrixControlIndex value in the index identifies the hlMatrixControlEntry on whose behalf this entry was created. The protocolDirLocalIndex value in the index identifies the network layer protocol of the nlMatrixSDSourceAddress and nlMatrixSDDestAddress.

An example of the indexing of this table is nlMatrixSDPkts.1.783495.18.4.128.2.6.6.4.128.2.6.7

func (*RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry) GetEntityData

func (nlMatrixSDEntry *RMON2MIB_NlMatrixSDTable_NlMatrixSDEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlMatrixTopNControlTable

type RMON2MIB_NlMatrixTopNControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the nlMatrixTopNControlTable.  An example of the
	// indexing of this table is nlMatrixTopNControlDuration.3. The type is slice
	// of RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry.
	NlMatrixTopNControlEntry []*RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry
}

RMON2MIB_NlMatrixTopNControlTable A set of parameters that control the creation of a report of the top N matrix entries according to a selected metric.

func (*RMON2MIB_NlMatrixTopNControlTable) GetEntityData

func (nlMatrixTopNControlTable *RMON2MIB_NlMatrixTopNControlTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry

type RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// nlMatrixTopNControlTable.  Each such entry defines one top N report
	// prepared for one interface. The type is interface{} with range: 1..65535.
	NlMatrixTopNControlIndex interface{}

	// The nlMatrix[SD/DS] table for which a top N report will be prepared on
	// behalf of this entry.  The nlMatrix[SD/DS] table is identified by the value
	// of the hlMatrixControlIndex for that table - that value is used here to
	// identify the particular table.  This object may not be modified if the
	// associated nlMatrixTopNControlStatus object is equal to active(1). The type
	// is interface{} with range: 1..65535.
	NlMatrixTopNControlMatrixIndex interface{}

	// The variable for each nlMatrix[SD/DS] entry that the nlMatrixTopNEntries
	// are sorted by.      This object may not be modified if the associated
	// nlMatrixTopNControlStatus object is equal to active(1). The type is
	// NlMatrixTopNControlRateBase.
	NlMatrixTopNControlRateBase interface{}

	// The number of seconds left in the report currently being collected.  When
	// this object is modified by the management station, a new collection is
	// started, possibly aborting a currently running report.  The new value is
	// used as the requested duration of this report, and is immediately loaded
	// into the associated nlMatrixTopNControlDuration object. When the report
	// finishes, the probe will automatically start another collection with the
	// same initial value of nlMatrixTopNControlTimeRemaining.  Thus the
	// management station may simply read the resulting reports repeatedly,
	// checking the startTime and duration each time to ensure that a report was
	// not missed or that the report parameters were not changed.  While the value
	// of this object is non-zero, it decrements by one per second until it
	// reaches zero.  At the time that this object decrements to zero, the report
	// is made accessible in the nlMatrixTopNTable, overwriting any report that
	// may be there.  When this object is modified by the management station, any
	// associated entries in the nlMatrixTopNTable shall be deleted.  (Note that
	// this is a different algorithm than the one used in the hostTopNTable). The
	// type is interface{} with range: 0..2147483647.
	NlMatrixTopNControlTimeRemaining interface{}

	// The number of reports that have been generated by this entry. The type is
	// interface{} with range: 0..4294967295.
	NlMatrixTopNControlGeneratedReports interface{}

	// The number of seconds that this report has collected during the last
	// sampling interval.  When the associated nlMatrixTopNControlTimeRemaining
	// object is set, this object shall be set by the probe to the same value and
	// shall not be modified until the next time the
	// nlMatrixTopNControlTimeRemaining is set. This value shall be zero if no
	// reports have been requested for this nlMatrixTopNControlEntry. The type is
	// interface{} with range: -2147483648..2147483647.
	NlMatrixTopNControlDuration interface{}

	// The maximum number of matrix entries requested for this report.  When this
	// object is created or modified, the probe should set
	// nlMatrixTopNControlGrantedSize as closely to this object as is possible for
	// the particular probe implementation and available resources. The type is
	// interface{} with range: 0..2147483647.
	NlMatrixTopNControlRequestedSize interface{}

	// The maximum number of matrix entries in this report.  When the associated
	// nlMatrixTopNControlRequestedSize object is created or modified, the probe
	// should set this object as closely to the requested value as is possible for
	// the particular implementation and available resources. The probe must not
	// lower this value except as a result of a set to the associated
	// nlMatrixTopNControlRequestedSize object.  If the value of
	// nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, when the next
	// topN report is generated, matrix entries with the highest value of
	// nlMatrixTopNPktRate shall be placed in this table in decreasing order of
	// this rate until there is no more room or until there are no more
	// matrix entries.  If the value of nlMatrixTopNControlRateBase is equal to
	// nlMatrixTopNOctets, when the next topN report is generated, matrix entries
	// with the highest value of nlMatrixTopNOctetRate shall be placed in this
	// table in decreasing order of this rate until there is no more room or until
	// there are no more matrix entries.  It is an implementation-specific matter
	// how entries with the same value of nlMatrixTopNPktRate or
	// nlMatrixTopNOctetRate are sorted.  It is also an implementation-specific
	// matter as to whether or not zero-valued entries are available. The type is
	// interface{} with range: 0..2147483647.
	NlMatrixTopNControlGrantedSize interface{}

	// The value of sysUpTime when this top N report was last started.  In other
	// words, this is the time that the associated
	// nlMatrixTopNControlTimeRemaining object was modified to start the requested
	// report or the time the report was last automatically (re)started.  This
	// object may be used by the management station to determine if a report was
	// missed or not. The type is interface{} with range: 0..4294967295.
	NlMatrixTopNControlStartTime interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	NlMatrixTopNControlOwner interface{}

	// The status of this nlMatrixTopNControlEntry.  An entry may not exist in the
	// active state unless all objects in the entry have an appropriate value.
	// If this object is not equal to active(1), all associated entries in the
	// nlMatrixTopNTable shall be deleted by the agent. The type is RowStatus.
	NlMatrixTopNControlStatus interface{}
}

RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry A conceptual row in the nlMatrixTopNControlTable.

An example of the indexing of this table is nlMatrixTopNControlDuration.3

func (*RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry) GetEntityData

func (nlMatrixTopNControlEntry *RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry_NlMatrixTopNControlRateBase

type RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry_NlMatrixTopNControlRateBase string

RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry_NlMatrixTopNControlRateBase represents nlMatrixTopNControlStatus object is equal to active(1).

const (
	RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry_NlMatrixTopNControlRateBase_nlMatrixTopNPkts RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry_NlMatrixTopNControlRateBase = "nlMatrixTopNPkts"

	RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry_NlMatrixTopNControlRateBase_nlMatrixTopNOctets RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry_NlMatrixTopNControlRateBase = "nlMatrixTopNOctets"
)

type RMON2MIB_NlMatrixTopNTable

type RMON2MIB_NlMatrixTopNTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the nlMatrixTopNTable.  The nlMatrixTopNControlIndex
	// value in the index identifies the nlMatrixTopNControlEntry on whose behalf
	// this entry was created.  An example of the indexing of this table is
	// nlMatrixTopNPktRate.3.10. The type is slice of
	// RMON2MIB_NlMatrixTopNTable_NlMatrixTopNEntry.
	NlMatrixTopNEntry []*RMON2MIB_NlMatrixTopNTable_NlMatrixTopNEntry
}

RMON2MIB_NlMatrixTopNTable A set of statistics for those network layer matrix entries that have counted the highest number of octets or packets.

func (*RMON2MIB_NlMatrixTopNTable) GetEntityData

func (nlMatrixTopNTable *RMON2MIB_NlMatrixTopNTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_NlMatrixTopNTable_NlMatrixTopNEntry

type RMON2MIB_NlMatrixTopNTable_NlMatrixTopNEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_NlMatrixTopNControlTable_NlMatrixTopNControlEntry_NlMatrixTopNControlIndex
	NlMatrixTopNControlIndex interface{}

	// This attribute is a key. An index that uniquely identifies an entry in the
	// nlMatrixTopNTable among those in the same report.      This index is
	// between 1 and N, where N is the number of entries in this report.  If the
	// value of nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts,
	// increasing values of nlMatrixTopNIndex shall be assigned to entries with
	// decreasing values of nlMatrixTopNPktRate until index N is assigned or there
	// are no more nlMatrixTopNEntries.  If the value of
	// nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, increasing
	// values of nlMatrixTopNIndex shall be assigned to entries with decreasing
	// values of nlMatrixTopNOctetRate until index N is assigned or there are no
	// more nlMatrixTopNEntries. The type is interface{} with range: 1..65535.
	NlMatrixTopNIndex interface{}

	// The protocolDirLocalIndex of the network layer protocol of this entry's
	// network address. The type is interface{} with range: 1..2147483647.
	NlMatrixTopNProtocolDirLocalIndex interface{}

	// The network layer address of the source host in this conversation.  This is
	// represented as an octet string with specific semantics and length as
	// identified by the associated nlMatrixTopNProtocolDirLocalIndex.  For
	// example, if the protocolDirLocalIndex indicates an encapsulation of ip,
	// this object is encoded as a length octet of 4, followed by the 4 octets of
	// the ip address, in network byte order. The type is string.
	NlMatrixTopNSourceAddress interface{}

	// The network layer address of the destination host in this conversation.
	// This is represented as an octet string with specific semantics and length
	// as identified by the associated nlMatrixTopNProtocolDirLocalIndex.  For
	// example, if the nlMatrixTopNProtocolDirLocalIndex indicates an
	// encapsulation of ip, this object is encoded as a length octet of 4,
	// followed by the 4 octets of the ip address, in network byte order. The type
	// is string.
	NlMatrixTopNDestAddress interface{}

	// The number of packets seen from the source host to the destination host
	// during this sampling interval, counted using the rules for counting the
	// nlMatrixSDPkts object. If the value of nlMatrixTopNControlRateBase is
	// nlMatrixTopNPkts, this variable will be used to sort this report. The type
	// is interface{} with range: 0..4294967295.
	NlMatrixTopNPktRate interface{}

	// The number of packets seen from the destination host to the source host
	// during this sampling interval, counted using the rules for counting the
	// nlMatrixSDPkts object (note that the corresponding nlMatrixSDPkts object
	// selected is the one whose source address is equal to
	// nlMatrixTopNDestAddress and whose destination address is equal to
	// nlMatrixTopNSourceAddress.)  Note that if the value of
	// nlMatrixTopNControlRateBase is equal to nlMatrixTopNPkts, the sort of topN
	// entries is based entirely on nlMatrixTopNPktRate, and not on the value of
	// this object. The type is interface{} with range: 0..4294967295.
	NlMatrixTopNReversePktRate interface{}

	// The number of octets seen from the source host to the destination host
	// during this sampling interval, counted using the rules for counting the
	// nlMatrixSDOctets object.  If the value of nlMatrixTopNControlRateBase is
	// nlMatrixTopNOctets, this variable will be used to sort this report. The
	// type is interface{} with range: 0..4294967295.
	NlMatrixTopNOctetRate interface{}

	// The number of octets seen from the destination host to the source host
	// during this sampling interval, counted using the rules for counting the
	// nlMatrixDSOctets object (note that the corresponding nlMatrixSDOctets
	// object selected is the one whose source address is equal to
	// nlMatrixTopNDestAddress and whose destination address is equal to
	// nlMatrixTopNSourceAddress.)  Note that if the value of
	// nlMatrixTopNControlRateBase is equal to nlMatrixTopNOctets, the sort of
	// topN entries is based entirely on nlMatrixTopNOctetRate, and not on the
	// value of this object. The type is interface{} with range: 0..4294967295.
	NlMatrixTopNReverseOctetRate interface{}
}

RMON2MIB_NlMatrixTopNTable_NlMatrixTopNEntry A conceptual row in the nlMatrixTopNTable.

The nlMatrixTopNControlIndex value in the index identifies the nlMatrixTopNControlEntry on whose behalf this entry was created.

An example of the indexing of this table is nlMatrixTopNPktRate.3.10

func (*RMON2MIB_NlMatrixTopNTable_NlMatrixTopNEntry) GetEntityData

func (nlMatrixTopNEntry *RMON2MIB_NlMatrixTopNTable_NlMatrixTopNEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_ProbeConfig

type RMON2MIB_ProbeConfig struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// An indication of the RMON MIB groups supported on at least one interface by
	// this probe. The type is string with length: 1..1.
	ProbeCapabilities interface{}

	// The software revision of this device.  This string will have a zero length
	// if the revision is unknown. The type is string with length: 0..31.
	ProbeSoftwareRev interface{}

	// The hardware revision of this device.  This string will have a zero length
	// if the revision is unknown. The type is string with length: 0..31.
	ProbeHardwareRev interface{}

	// Probe's current date and time.  field  octets  contents
	// range -----  ------  --------                  -----   1      1-2   year
	// 0..65536   2       3    month                     1..12   3       4    day
	// 1..31   4       5    hour                      0..23   5       6    minutes
	// 0..59   6       7    seconds                   0..60                 (use
	// 60 for leap-second)   7       8    deci-seconds              0..9   8
	// 9    direction from UTC        '+' / '-'   9      10    hours from UTC
	// 0..11  10      11    minutes from UTC          0..59  For example, Tuesday
	// May 26, 1992 at 1:30:15 PM EDT would be displayed as:
	// 1992-5-26,13:30:15.0,-4:0  Note that if only local time is known, then
	// timezone information (fields 8-10) is not present, and if no time
	// information is known, the null string is returned. The type is string with
	// length: 0..0 | 8..8 | 11..11.
	ProbeDateTime interface{}

	// Setting this object to warmBoot(2) causes the device to restart the
	// application software with current configuration parameters saved in
	// non-volatile memory.  Setting this object to coldBoot(3) causes the device
	// to reinitialize configuration parameters in non-volatile memory to default
	// values and restart the application software.  When the device is running
	// normally, this variable has a value of running(1). The type is
	// ProbeResetControl.
	ProbeResetControl interface{}

	// The file name to be downloaded from the TFTP server when a download is next
	// requested via this MIB.  This value is set to the zero length string when
	// no file name has been specified. The type is string with length: 0..127.
	ProbeDownloadFile interface{}

	// The IP address of the TFTP server that contains the boot image to load when
	// a download is next requested via this MIB. This value is set to `0.0.0.0'
	// when no IP address has been specified. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	ProbeDownloadTFTPServer interface{}

	// When this object is set to downloadToRAM(2) or downloadToPROM(3), the
	// device will discontinue its normal operation and begin download of the
	// image specified by probeDownloadFile from the server specified by
	// probeDownloadTFTPServer using the TFTP protocol.  If downloadToRAM(2) is
	// specified, the new image is copied to RAM only (the old image remains
	// unaltered in the flash EPROM).  If downloadToPROM(3) is specified the new
	// image is written to the flash EPROM memory after its checksum has been
	// verified to be correct. When the download process is completed, the device
	// will      warm boot to restart the newly loaded application. When the
	// device is not downloading, this object will have a value of
	// notDownloading(1). The type is ProbeDownloadAction.
	ProbeDownloadAction interface{}

	// The status of the last download procedure, if any.  This object will have a
	// value of downloadStatusUnknown(2) if no download process has been
	// performed. The type is ProbeDownloadStatus.
	ProbeDownloadStatus interface{}

	// The IP Address of the default gateway.  If this value is undefined or
	// unknown, it shall have the value 0.0.0.0. The type is string with pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	NetDefaultGateway interface{}
}

RMON2MIB_ProbeConfig

func (*RMON2MIB_ProbeConfig) GetEntityData

func (probeConfig *RMON2MIB_ProbeConfig) GetEntityData() *types.CommonEntityData

type RMON2MIB_ProbeConfig_ProbeDownloadAction

type RMON2MIB_ProbeConfig_ProbeDownloadAction string

RMON2MIB_ProbeConfig_ProbeDownloadAction represents a value of notDownloading(1).

const (
	RMON2MIB_ProbeConfig_ProbeDownloadAction_notDownloading RMON2MIB_ProbeConfig_ProbeDownloadAction = "notDownloading"

	RMON2MIB_ProbeConfig_ProbeDownloadAction_downloadToPROM RMON2MIB_ProbeConfig_ProbeDownloadAction = "downloadToPROM"

	RMON2MIB_ProbeConfig_ProbeDownloadAction_downloadToRAM RMON2MIB_ProbeConfig_ProbeDownloadAction = "downloadToRAM"
)

type RMON2MIB_ProbeConfig_ProbeDownloadStatus

type RMON2MIB_ProbeConfig_ProbeDownloadStatus string

RMON2MIB_ProbeConfig_ProbeDownloadStatus represents download process has been performed.

const (
	RMON2MIB_ProbeConfig_ProbeDownloadStatus_downloadSuccess RMON2MIB_ProbeConfig_ProbeDownloadStatus = "downloadSuccess"

	RMON2MIB_ProbeConfig_ProbeDownloadStatus_downloadStatusUnknown RMON2MIB_ProbeConfig_ProbeDownloadStatus = "downloadStatusUnknown"

	RMON2MIB_ProbeConfig_ProbeDownloadStatus_downloadGeneralError RMON2MIB_ProbeConfig_ProbeDownloadStatus = "downloadGeneralError"

	RMON2MIB_ProbeConfig_ProbeDownloadStatus_downloadNoResponseFromServer RMON2MIB_ProbeConfig_ProbeDownloadStatus = "downloadNoResponseFromServer"

	RMON2MIB_ProbeConfig_ProbeDownloadStatus_downloadChecksumError RMON2MIB_ProbeConfig_ProbeDownloadStatus = "downloadChecksumError"

	RMON2MIB_ProbeConfig_ProbeDownloadStatus_downloadIncompatibleImage RMON2MIB_ProbeConfig_ProbeDownloadStatus = "downloadIncompatibleImage"

	RMON2MIB_ProbeConfig_ProbeDownloadStatus_downloadTftpFileNotFound RMON2MIB_ProbeConfig_ProbeDownloadStatus = "downloadTftpFileNotFound"

	RMON2MIB_ProbeConfig_ProbeDownloadStatus_downloadTftpAccessViolation RMON2MIB_ProbeConfig_ProbeDownloadStatus = "downloadTftpAccessViolation"
)

type RMON2MIB_ProbeConfig_ProbeResetControl

type RMON2MIB_ProbeConfig_ProbeResetControl string

RMON2MIB_ProbeConfig_ProbeResetControl represents running(1).

const (
	RMON2MIB_ProbeConfig_ProbeResetControl_running RMON2MIB_ProbeConfig_ProbeResetControl = "running"

	RMON2MIB_ProbeConfig_ProbeResetControl_warmBoot RMON2MIB_ProbeConfig_ProbeResetControl = "warmBoot"

	RMON2MIB_ProbeConfig_ProbeResetControl_coldBoot RMON2MIB_ProbeConfig_ProbeResetControl = "coldBoot"
)

type RMON2MIB_ProtocolDir

type RMON2MIB_ProtocolDir struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// The value of sysUpTime at the time the protocol directory was last
	// modified, either through insertions or deletions, or through modifications
	// of either the protocolDirAddressMapConfig, protocolDirHostConfig, or
	// protocolDirMatrixConfig. The type is interface{} with range: 0..4294967295.
	ProtocolDirLastChange interface{}
}

RMON2MIB_ProtocolDir

func (*RMON2MIB_ProtocolDir) GetEntityData

func (protocolDir *RMON2MIB_ProtocolDir) GetEntityData() *types.CommonEntityData

type RMON2MIB_ProtocolDirTable

type RMON2MIB_ProtocolDirTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the protocolDirTable.  An example of the indexing of
	// this entry is protocolDirLocalIndex.8.0.0.0.1.0.0.8.0.2.0.0, which is the
	// encoding of a length of 8, followed by 8 subids encoding the protocolDirID
	// of 1.2048, followed by a length of 2 and the 2 subids encoding zero-valued
	// parameters. The type is slice of
	// RMON2MIB_ProtocolDirTable_ProtocolDirEntry.
	ProtocolDirEntry []*RMON2MIB_ProtocolDirTable_ProtocolDirEntry
}

RMON2MIB_ProtocolDirTable This table lists the protocols that this agent has the capability to decode and count. There is one entry in this table for each such protocol. These protocols represent different network layer, transport layer, and higher-layer protocols. The agent should boot up with this table preconfigured with those protocols that it knows about and wishes to monitor. Implementations are strongly encouraged to support protocols higher than the network layer (at least for the protocol distribution group), even for implementations that don't support the application layer groups.

func (*RMON2MIB_ProtocolDirTable) GetEntityData

func (protocolDirTable *RMON2MIB_ProtocolDirTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_ProtocolDirTable_ProtocolDirEntry

type RMON2MIB_ProtocolDirTable_ProtocolDirEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A unique identifier for a particular protocol.
	// Standard identifiers will be defined in a manner such that they can often
	// be used as specifications for new protocols - i.e. a tree-structured
	// assignment mechanism that matches the protocol encapsulation `tree' and
	// which has algorithmic assignment mechanisms for certain subtrees. See RFC
	// XXX for more details.  Despite the algorithmic mechanism, the probe will
	// only place entries in here for those protocols it chooses to collect.  In
	// other words, it need not populate this table with all of the possible
	// ethernet protocol types, nor need it create them on the fly when it sees
	// them.  Whether or not it does these things is a matter of product
	// definition (cost/benefit, usability), and is up to the designer of the
	// product.  If an entry is written to this table with a protocolDirID that
	// the agent doesn't understand, either directly or algorithmically, the SET
	// request will be rejected with an inconsistentName or badValue (for SNMPv1)
	// error. The type is string.
	ProtocolDirID interface{}

	// This attribute is a key. A set of parameters for the associated
	// protocolDirID. See the associated RMON2 Protocol Identifiers document for a
	// description of the possible parameters. There will be one octet in this
	// string for each sub-identifier in the protocolDirID, and the parameters
	// will appear here in the same order as the associated sub-identifiers appear
	// in the protocolDirID.  Every node in the protocolDirID tree has a
	// different, optional set of parameters defined (that is, the definition of
	// parameters for a node is optional).  The proper parameter value for each
	// node is included in this string.  Note that the inclusion of a parameter
	// value in this string for each node is not optional - what is optional is
	// that a node may have no parameters defined, in which case the parameter
	// field for that node will be zero. The type is string.
	ProtocolDirParameters interface{}

	// The locally arbitrary, but unique identifier associated with this
	// protocolDir entry.  The value for each supported protocol must remain
	// constant at least from one re-initialization of the entity's network
	// management system to the next re-initialization, except that if a protocol
	// is deleted and re-created, it must be re-created with a new value that has
	// not been used since the last re-initialization.  The specific value is
	// meaningful only within a given SNMP entity. A protocolDirLocalIndex must
	// not be re-used until the next agent-restart in the event the protocol
	// directory entry is deleted. The type is interface{} with range:
	// 1..2147483647.
	ProtocolDirLocalIndex interface{}

	// A textual description of the protocol encapsulation. A probe may choose to
	// describe only a subset of the entire encapsulation (e.g. only the highest
	// layer).  This object is intended for human consumption only.  This object
	// may not be modified if the associated protocolDirStatus object is equal to
	// active(1). The type is string with length: 1..64.
	ProtocolDirDescr interface{}

	// This object describes 2 attributes of this protocol directory entry.  The
	// presence or absence of the `extensible' bit describes whether or not this
	// protocol directory entry can be extended      by the user by creating
	// protocol directory entries which are children of this protocol.  An example
	// of an entry that will often allow extensibility is `ip.udp'.  The probe may
	// automatically populate some children of this node such as `ip.udp.snmp' and
	// `ip.udp.dns'. A probe administrator or user may also populate additional
	// children via remote SNMP requests that create entries in this table.  When
	// a child node is added for a protocol for which the probe has no built in
	// support, extending a parent node (for which the probe does have built in
	// support), that child node is not extendible.  This is termed `limited
	// extensibility'.  When a child node is added through this extensibility
	// mechanism, the values of protocolDirLocalIndex and protocolDirType shall be
	// assigned by the agent.  The other objects in the entry will be assigned by
	// the manager who is creating the new entry.  This object also describes
	// whether or not this agent can recognize addresses for this protocol, should
	// it be a network level protocol.  That is, while a probe may be able to
	// recognize packets of a particular network layer protocol and count them, it
	// takes additional logic to be able to recognize the addresses in this
	// protocol and to populate network layer or application layer tables with the
	// addresses in this protocol.  If this bit is set, the agent will recognize
	// network layer addresses for this protoocl and populate the network and
	// application layer host and matrix tables with these protocols.  Note that
	// when an entry is created, the agent will supply values for the bits that
	// match the capabilities of the agent with respect to this protocol.  Note
	// that since row creations usually exercise the limited extensibility
	// feature, these bits will usually be set to zero. The type is string with
	// length: 1..1.
	ProtocolDirType interface{}

	// This object describes and configures the probe's support for address
	// mapping for this protocol.  When the probe creates entries in this table
	// for all protocols that it understands, it will set the entry to
	// notSupported(1) if it doesn't have the capability to perform address
	// mapping for the protocol or if this protocol is not a network-layer
	// protocol.  When an entry is created in this table by a management operation
	// as part of the limited extensibility feature, the probe must set this value
	// to notSupported(1), because limited extensibility of the protocolDirTable
	// does not extend to interpreting addresses of the extended protocols.  If
	// the value of this object is notSupported(1), the probe will not perform
	// address mapping for this protocol and shall not allow this object to be
	// changed to any other value. If the value of this object is supportedOn(3),
	// the probe supports address mapping for this protocol and is configured to
	// perform address mapping for this protocol for all
	// addressMappingControlEntries and all interfaces. If the value of this
	// object is supportedOff(2), the probe supports address mapping for this
	// protocol but is configured to not perform address mapping for this protocol
	// for any addressMappingControlEntries and all interfaces. Whenever this
	// value changes from supportedOn(3) to supportedOff(2), the probe shall
	// delete all related entries in the addressMappingTable. The type is
	// ProtocolDirAddressMapConfig.
	ProtocolDirAddressMapConfig interface{}

	// This object describes and configures the probe's support for the network
	// layer and application layer host tables for this protocol.  When the probe
	// creates entries in this table for all protocols that it understands, it
	// will set the entry to notSupported(1) if it doesn't have the capability to
	// track the nlHostTable for this protocol or if the alHostTable is
	// implemented but doesn't have the capability to track this protocol.  Note
	// that if the alHostTable is implemented, the probe may only support a
	// protocol if it is supported in both the nlHostTable and the alHostTable.
	// If the associated protocolDirType object has the addressRecognitionCapable
	// bit set, then this is a network layer protocol for which the probe
	// recognizes addresses, and thus the probe will populate the nlHostTable and
	// alHostTable with addresses it discovers for this protocol.  If the value of
	// this object is notSupported(1), the probe will not track the nlHostTable or
	// alHostTable for this protocol and shall not allow this object to be changed
	// to any other value. If the value of this object is supportedOn(3), the
	// probe supports tracking of the nlHostTable and alHostTable for this
	// protocol and is configured to track both tables for this protocol for all
	// control entries and all interfaces. If the value of this object is
	// supportedOff(2), the probe supports tracking of the nlHostTable and
	// alHostTable for this protocol but is configured to not track these tables
	// for any control entries or interfaces. Whenever this value changes from
	// supportedOn(3) to supportedOff(2), the probe shall delete all related
	// entries in the nlHostTable and alHostTable.  Note that since each
	// alHostEntry references 2 protocol directory entries, one for the network
	// address and one for the type of the highest protocol recognized, that an
	// entry will only be created in that table if this value is supportedOn(3)
	// for both protocols. The type is ProtocolDirHostConfig.
	ProtocolDirHostConfig interface{}

	// This object describes and configures the probe's support for the network
	// layer and application layer matrix tables for this protocol.  When the
	// probe creates entries in this table for all protocols that it understands,
	// it will set the entry to notSupported(1) if it doesn't have the capability
	// to track the nlMatrixTables for this protocol or if the alMatrixTables are
	// implemented but don't have the capability to track this protocol.  Note
	// that if the alMatrix tables are implemented, the probe may only support a
	// protocol if it is supported in the the both of the nlMatrixTables and both
	// of the alMatrixTables.      If the associated protocolDirType object has
	// the addressRecognitionCapable bit set, then this is a network layer
	// protocol for which the probe recognizes addresses, and thus the probe will
	// populate both of the nlMatrixTables and both of the alMatrixTables with
	// addresses it discovers for this protocol.  If the value of this object is
	// notSupported(1), the probe will not track either of the nlMatrixTables or
	// the alMatrixTables for this protocol and shall not allow this object to be
	// changed to any other value. If the value of this object is supportedOn(3),
	// the probe supports tracking of both of the nlMatrixTables and (if
	// implemented) both of the alMatrixTables for this protocol and is configured
	// to track these tables for this protocol for all control entries and all
	// interfaces. If the value of this object is supportedOff(2), the probe
	// supports tracking of both of the nlMatrixTables and (if implemented) both
	// of the alMatrixTables for this protocol but is configured to not track
	// these tables for this protocol for any control entries or interfaces.
	// Whenever this value changes from supportedOn(3) to supportedOff(2), the
	// probe shall delete all related entries in the nlMatrixTables and the
	// alMatrixTables.  Note that since each alMatrixEntry references 2 protocol
	// directory entries, one for the network address and one for the type of the
	// highest protocol recognized, that an entry will only be created in that
	// table if this value is supportedOn(3) for both protocols. The type is
	// ProtocolDirMatrixConfig.
	ProtocolDirMatrixConfig interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	ProtocolDirOwner interface{}

	// The status of this protocol directory entry.  An entry may not exist in the
	// active state unless all      objects in the entry have an appropriate
	// value.  If this object is not equal to active(1), all associated entries in
	// the nlHostTable, nlMatrixSDTable, nlMatrixDSTable, alHostTable,
	// alMatrixSDTable, and alMatrixDSTable shall be deleted. The type is
	// RowStatus.
	ProtocolDirStatus interface{}
}

RMON2MIB_ProtocolDirTable_ProtocolDirEntry A conceptual row in the protocolDirTable.

An example of the indexing of this entry is protocolDirLocalIndex.8.0.0.0.1.0.0.8.0.2.0.0, which is the encoding of a length of 8, followed by 8 subids encoding the protocolDirID of 1.2048, followed by a length of 2 and the 2 subids encoding zero-valued parameters.

func (*RMON2MIB_ProtocolDirTable_ProtocolDirEntry) GetEntityData

func (protocolDirEntry *RMON2MIB_ProtocolDirTable_ProtocolDirEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig

type RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig string

RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig represents the addressMappingTable.

const (
	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig_notSupported RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig = "notSupported"

	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig_supportedOff RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig = "supportedOff"

	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig_supportedOn RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirAddressMapConfig = "supportedOn"
)

type RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig

type RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig string

RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig represents for both protocols.

const (
	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig_notSupported RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig = "notSupported"

	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig_supportedOff RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig = "supportedOff"

	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig_supportedOn RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirHostConfig = "supportedOn"
)

type RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig

type RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig string

RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig represents for both protocols.

const (
	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig_notSupported RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig = "notSupported"

	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig_supportedOff RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig = "supportedOff"

	RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig_supportedOn RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirMatrixConfig = "supportedOn"
)

type RMON2MIB_ProtocolDistControlTable

type RMON2MIB_ProtocolDistControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the protocolDistControlTable.  An example of the
	// indexing of this entry is      protocolDistControlDroppedFrames.7. The type
	// is slice of RMON2MIB_ProtocolDistControlTable_ProtocolDistControlEntry.
	ProtocolDistControlEntry []*RMON2MIB_ProtocolDistControlTable_ProtocolDistControlEntry
}

RMON2MIB_ProtocolDistControlTable Controls the setup of protocol type distribution statistics tables.

Implementations are encouraged to add an entry per monitored interface upon initialization so that a default collection of protocol statistics is available.

Rationale: This table controls collection of very basic statistics for any or all of the protocols detected on a given interface. An NMS can use this table to quickly determine bandwidth allocation utilized by different protocols.

A media-specific statistics collection could also be configured (e.g. etherStats, trPStats) to easily obtain total frame, octet, and droppedEvents for the same interface.

func (*RMON2MIB_ProtocolDistControlTable) GetEntityData

func (protocolDistControlTable *RMON2MIB_ProtocolDistControlTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_ProtocolDistControlTable_ProtocolDistControlEntry

type RMON2MIB_ProtocolDistControlTable_ProtocolDistControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A unique index for this protocolDistControlEntry.
	// The type is interface{} with range: 1..65535.
	ProtocolDistControlIndex interface{}

	// The source of data for the this protocol distribution.  The statistics in
	// this group reflect all packets on the local network segment attached to the
	// identified interface.  This object may not be modified if the associated
	// protocolDistControlStatus object is equal to active(1). The type is string
	// with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	ProtocolDistControlDataSource interface{}

	// The total number of frames which were received by the probe and therefore
	// not accounted for in the *StatsDropEvents, but for which the probe chose
	// not to count for this entry for whatever reason.  Most often, this event
	// occurs when the probe is out of some resources and decides to shed load
	// from this collection.       This count does not include packets that were
	// not counted because they had MAC-layer errors.  Note that, unlike the
	// dropEvents counter, this number is the exact number of frames dropped. The
	// type is interface{} with range: 0..4294967295.
	ProtocolDistControlDroppedFrames interface{}

	// The value of sysUpTime when this control entry was last activated. This can
	// be used by the management station to ensure that the table has not been
	// deleted and recreated between polls. The type is interface{} with range:
	// 0..4294967295.
	ProtocolDistControlCreateTime interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	ProtocolDistControlOwner interface{}

	// The status of this row.  An entry may not exist in the active state unless
	// all objects in the entry have an appropriate value.  If this object is not
	// equal to active(1), all associated entries in the protocolDistStatsTable
	// shall be deleted. The type is RowStatus.
	ProtocolDistControlStatus interface{}
}

RMON2MIB_ProtocolDistControlTable_ProtocolDistControlEntry A conceptual row in the protocolDistControlTable.

An example of the indexing of this entry is

protocolDistControlDroppedFrames.7

func (*RMON2MIB_ProtocolDistControlTable_ProtocolDistControlEntry) GetEntityData

func (protocolDistControlEntry *RMON2MIB_ProtocolDistControlTable_ProtocolDistControlEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_ProtocolDistStatsTable

type RMON2MIB_ProtocolDistStatsTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A conceptual row in the protocolDistStatsTable.  The index is composed of
	// the protocolDistControlIndex of the associated protocolDistControlEntry
	// followed by the protocolDirLocalIndex of the associated protocol that this
	// entry represents.  In other words, the index identifies the protocol
	// distribution an entry is a part of as well as the particular protocol that
	// it represents.  An example of the indexing of this entry is
	// protocolDistStatsPkts.1.18. The type is slice of
	// RMON2MIB_ProtocolDistStatsTable_ProtocolDistStatsEntry.
	ProtocolDistStatsEntry []*RMON2MIB_ProtocolDistStatsTable_ProtocolDistStatsEntry
}

RMON2MIB_ProtocolDistStatsTable An entry is made in this table for every protocol in the

protocolDirTable which has been seen in at least one packet. Counters are updated in this table for every protocol type that is encountered when parsing a packet, but no counters are updated for packets with MAC-layer errors.

Note that if a protocolDirEntry is deleted, all associated entries in this table are removed.

func (*RMON2MIB_ProtocolDistStatsTable) GetEntityData

func (protocolDistStatsTable *RMON2MIB_ProtocolDistStatsTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_ProtocolDistStatsTable_ProtocolDistStatsEntry

type RMON2MIB_ProtocolDistStatsTable_ProtocolDistStatsEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_ProtocolDistControlTable_ProtocolDistControlEntry_ProtocolDistControlIndex
	ProtocolDistControlIndex interface{}

	// This attribute is a key. The type is string with range: 1..2147483647.
	// Refers to
	// rmon2_mib.RMON2MIB_ProtocolDirTable_ProtocolDirEntry_ProtocolDirLocalIndex
	ProtocolDirLocalIndex interface{}

	// The number of packets without errors received of this protocol type.  Note
	// that this is the number of link-layer packets, so if a single network-layer
	// packet is fragmented into several link-layer frames, this counter is
	// incremented several times. The type is interface{} with range:
	// 0..4294967295.
	ProtocolDistStatsPkts interface{}

	// The number of octets in packets received of this protocol type since it was
	// added to the protocolDistStatsTable (excluding framing bits but including
	// FCS octets), except for those octets in packets that contained errors.
	// Note this doesn't count just those octets in the particular protocol
	// frames, but includes the entire packet that contained the protocol. The
	// type is interface{} with range: 0..4294967295.
	ProtocolDistStatsOctets interface{}
}

RMON2MIB_ProtocolDistStatsTable_ProtocolDistStatsEntry A conceptual row in the protocolDistStatsTable.

The index is composed of the protocolDistControlIndex of the associated protocolDistControlEntry followed by the protocolDirLocalIndex of the associated protocol that this entry represents. In other words, the index identifies the protocol distribution an entry is a part of as well as the particular protocol that it represents.

An example of the indexing of this entry is protocolDistStatsPkts.1.18

func (*RMON2MIB_ProtocolDistStatsTable_ProtocolDistStatsEntry) GetEntityData

func (protocolDistStatsEntry *RMON2MIB_ProtocolDistStatsTable_ProtocolDistStatsEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_SerialConfigTable

type RMON2MIB_SerialConfigTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A set of configuration parameters for a particular serial interface on this
	// device. If the device has no serial interfaces, this table is empty.  The
	// index is composed of the ifIndex assigned to this serial line interface.
	// The type is slice of RMON2MIB_SerialConfigTable_SerialConfigEntry.
	SerialConfigEntry []*RMON2MIB_SerialConfigTable_SerialConfigEntry
}

RMON2MIB_SerialConfigTable A table of serial interface configuration entries. This data will be stored in non-volatile memory and preserved across probe resets or power loss.

func (*RMON2MIB_SerialConfigTable) GetEntityData

func (serialConfigTable *RMON2MIB_SerialConfigTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_SerialConfigTable_SerialConfigEntry

type RMON2MIB_SerialConfigTable_SerialConfigEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range:
	// -2147483648..2147483647. Refers to
	// rfc1213_mib.RFC1213MIB_IfTable_IfEntry_IfIndex
	IfIndex interface{}

	// The type of incoming connection to expect on this serial interface. The
	// type is SerialMode.
	SerialMode interface{}

	// The type of data link encapsulation to be used on this serial interface.
	// The type is SerialProtocol.
	SerialProtocol interface{}

	// This timeout value is used when the Management Station has initiated the
	// conversation over the serial link. This variable represents the number of
	// seconds of inactivity allowed before terminating the connection on this
	// serial interface. Use the      serialDialoutTimeout in the case where the
	// probe has initiated the connection for the purpose of sending a trap. The
	// type is interface{} with range: 1..65535.
	SerialTimeout interface{}

	// A control string which controls how a modem attached to this serial
	// interface should be initialized.  The initialization is performed once
	// during startup and again after each connection is terminated if the
	// associated serialMode has the value of modem(2).  A control string that is
	// appropriate for a wide variety of modems is: '^s^MATE0Q0V1X4 S0=1 S2=43^M'.
	// The type is string with length: 0..255.
	SerialModemInitString interface{}

	// A control string which specifies how to disconnect a modem connection on
	// this serial interface.  This object is only meaningful if the associated
	// serialMode has the value of modem(2). A control string that is appropriate
	// for a wide variety of modems is: '^d2^s+++^d2^sATH0^M^d2'. The type is
	// string with length: 0..255.
	SerialModemHangUpString interface{}

	// An ASCII string containing substrings that describe the expected modem
	// connection response code and associated bps rate.  The substrings are
	// delimited by the first character in the string, for example:
	// /CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/    CONNECT
	// 4800/4800/CONNECT 9600/9600 will be interpreted as:     response code
	// bps rate     CONNECT            300     CONNECT 1200      1200
	// CONNECT 2400      2400     CONNECT 4800      4800     CONNECT 9600
	// 9600 The agent will use the information in this string to adjust the bps
	// rate of this serial interface once a modem connection is established.  A
	// value that is appropriate for a wide variety of modems is:
	// '/CONNECT/300/CONNECT 1200/1200/CONNECT 2400/2400/  CONNECT
	// 4800/4800/CONNECT 9600/9600/CONNECT 14400/14400/ CONNECT
	// 19200/19200/CONNECT 38400/38400/'. The type is string with length: 0..255.
	SerialModemConnectResp interface{}

	// An ASCII string containing response codes that may be generated by a modem
	// to report the reason why a connection attempt has failed.  The response
	// codes are delimited by the first character in the string, for example:
	// /NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/ If one of these response
	// codes is received via this serial interface while attempting to make a
	// modem connection, the agent will issue the hang up command as specified by
	// serialModemHangUpString.  A value that is appropriate for a wide variety of
	// modems is: '/NO CARRIER/BUSY/NO DIALTONE/NO ANSWER/ERROR/'. The type is
	// string with length: 0..255.
	SerialModemNoConnectResp interface{}

	// This timeout value is used when the probe initiates the serial connection
	// with the intention of contacting a management station. This variable
	// represents the number of seconds of inactivity allowed before terminating
	// the connection on this serial interface. The type is interface{} with
	// range: 1..65535.
	SerialDialoutTimeout interface{}

	// The status of this serialConfigEntry.  An entry may not exist in the active
	// state unless all objects in the entry have an appropriate value. The type
	// is RowStatus.
	SerialStatus interface{}
}

RMON2MIB_SerialConfigTable_SerialConfigEntry A set of configuration parameters for a particular serial interface on this device. If the device has no serial interfaces, this table is empty.

The index is composed of the ifIndex assigned to this serial line interface.

func (*RMON2MIB_SerialConfigTable_SerialConfigEntry) GetEntityData

func (serialConfigEntry *RMON2MIB_SerialConfigTable_SerialConfigEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialMode

type RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialMode string

RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialMode represents interface.

const (
	RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialMode_direct RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialMode = "direct"

	RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialMode_modem RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialMode = "modem"
)

type RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol

type RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol string

RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol represents serial interface.

const (
	RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol_other RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol = "other"

	RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol_slip RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol = "slip"

	RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol_ppp RMON2MIB_SerialConfigTable_SerialConfigEntry_SerialProtocol = "ppp"
)

type RMON2MIB_SerialConnectionTable

type RMON2MIB_SerialConnectionTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// Configuration for a SLIP link over a serial line. The type is slice of
	// RMON2MIB_SerialConnectionTable_SerialConnectionEntry.
	SerialConnectionEntry []*RMON2MIB_SerialConnectionTable_SerialConnectionEntry
}

RMON2MIB_SerialConnectionTable A list of serialConnectionEntries.

func (*RMON2MIB_SerialConnectionTable) GetEntityData

func (serialConnectionTable *RMON2MIB_SerialConnectionTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_SerialConnectionTable_SerialConnectionEntry

type RMON2MIB_SerialConnectionTable_SerialConnectionEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A value that uniquely identifies this
	// serialConnection entry. The type is interface{} with range: 1..65535.
	SerialConnectIndex interface{}

	// The IP Address that can be reached at the other end of this serial
	// connection. This object may not be modified if the associated
	// serialConnectStatus object is equal to active(1). The type is string with
	// pattern:
	// (([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])(%[\p{N}\p{L}]+)?.
	SerialConnectDestIpAddress interface{}

	// The type of outgoing connection to make.  If this object has the value
	// direct(1), then a direct serial connection is assumed.  If this object has
	// the value modem(2), then serialConnectDialString will be used to make a
	// modem connection.  If this object has the value switch(3),      then
	// serialConnectSwitchConnectSeq will be used to establish the connection over
	// a serial data switch, and serialConnectSwitchDisconnectSeq will be used to
	// terminate the connection.  If this object has the value modem-switch(4),
	// then a modem connection will be made first followed by the switch
	// connection.  This object may not be modified if the associated
	// serialConnectStatus object is equal to active(1). The type is
	// SerialConnectType.
	SerialConnectType interface{}

	// A control string which specifies how to dial the phone number in order to
	// establish a modem connection.  The string should include dialing prefix and
	// suffix.  For example: “^s^MATD9,888-1234^M” will instruct the Probe to
	// send a carriage return followed by the dialing prefix “ATD”, the phone
	// number “9,888-1234”, and a carriage return as the dialing suffix. This
	// object may not be modified if the associated serialConnectStatus object is
	// equal to active(1). The type is string with length: 0..255.
	SerialConnectDialString interface{}

	// A control string which specifies how to establish a data switch connection.
	// This object may not be modified if the associated serialConnectStatus
	// object is equal to active(1). The type is string with length: 0..255.
	SerialConnectSwitchConnectSeq interface{}

	// A control string which specifies how to terminate a data switch connection.
	// This object may not be modified if the associated      serialConnectStatus
	// object is equal to active(1). The type is string with length: 0..255.
	SerialConnectSwitchDisconnectSeq interface{}

	// A control string which specifies how to reset a data switch in the event of
	// a timeout. This object may not be modified if the associated
	// serialConnectStatus object is equal to active(1). The type is string with
	// length: 0..255.
	SerialConnectSwitchResetSeq interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	SerialConnectOwner interface{}

	// The status of this serialConnectionEntry.  If the manager attempts to set
	// this object to active(1) when the serialConnectType is set to modem(2) or
	// modem-switch(4) and the serialConnectDialString is a zero-length string or
	// cannot be correctly parsed as a ConnectString, the set request will be
	// rejected with badValue(3).  If the manager attempts to set this object to
	// active(1) when the serialConnectType is set to switch(3) or modem-switch(4)
	// and the serialConnectSwitchConnectSeq, the
	// serialConnectSwitchDisconnectSeq, or the serialConnectSwitchResetSeq are
	// zero-length strings or cannot be correctly parsed as ConnectStrings, the
	// set request will be rejected with badValue(3).  An entry may not exist in
	// the active state unless all objects in the entry have an appropriate value.
	// The type is RowStatus.
	SerialConnectStatus interface{}
}

RMON2MIB_SerialConnectionTable_SerialConnectionEntry Configuration for a SLIP link over a serial line.

func (*RMON2MIB_SerialConnectionTable_SerialConnectionEntry) GetEntityData

func (serialConnectionEntry *RMON2MIB_SerialConnectionTable_SerialConnectionEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType

type RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType string

RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType represents serialConnectStatus object is equal to active(1).

const (
	RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType_direct RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType = "direct"

	RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType_modem RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType = "modem"

	RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType_switch_ RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType = "switch"

	RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType_modemSwitch RMON2MIB_SerialConnectionTable_SerialConnectionEntry_SerialConnectType = "modemSwitch"
)

type RMON2MIB_TrapDestTable

type RMON2MIB_TrapDestTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// This entry includes a destination IP address to which to send traps for
	// this community. The type is slice of RMON2MIB_TrapDestTable_TrapDestEntry.
	TrapDestEntry []*RMON2MIB_TrapDestTable_TrapDestEntry
}

RMON2MIB_TrapDestTable A list of trap destination entries.

func (*RMON2MIB_TrapDestTable) GetEntityData

func (trapDestTable *RMON2MIB_TrapDestTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_TrapDestTable_TrapDestEntry

type RMON2MIB_TrapDestTable_TrapDestEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. A value that uniquely identifies this
	// trapDestEntry. The type is interface{} with range: 1..65535.
	TrapDestIndex interface{}

	// A community to which this destination address belongs. This entry is
	// associated with any eventEntries in the RMON      MIB whose value of
	// eventCommunity is equal to the value of this object.  Every time an
	// associated event entry sends a trap due to an event, that trap will be sent
	// to each address in the trapDestTable with a trapDestCommunity equal to
	// eventCommunity.  This object may not be modified if the associated
	// trapDestStatus object is equal to active(1). The type is string with
	// length: 0..127.
	TrapDestCommunity interface{}

	// The protocol with which to send this trap. The type is TrapDestProtocol.
	TrapDestProtocol interface{}

	// The address to send traps on behalf of this entry.  If the associated
	// trapDestProtocol object is equal to ip(1), the encoding of this object is
	// the same as the snmpUDPAddress textual convention in [RFC1906]:   -- for a
	// SnmpUDPAddress of length 6:   --   -- octets   contents        encoding
	// --  1-4     IP-address      network-byte order   --  5-6     UDP-port
	// network-byte order  If the associated trapDestProtocol object is equal to
	// ipx(2), the encoding of this object is the same as the snmpIPXAddress
	// textual convention in [RFC1906]:   -- for a SnmpIPXAddress of length 12:
	// --   -- octets   contents            encoding   --  1-4     network-number
	// network-byte order   --  5-10    physical-address    network-byte order
	// -- 11-12    socket-number       network-byte order  This object may not be
	// modified if the associated      trapDestStatus object is equal to
	// active(1). The type is string.
	TrapDestAddress interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	TrapDestOwner interface{}

	// The status of this trap destination entry.  An entry may not exist in the
	// active state unless all objects in the entry have an appropriate value. The
	// type is RowStatus.
	TrapDestStatus interface{}
}

RMON2MIB_TrapDestTable_TrapDestEntry This entry includes a destination IP address to which to send traps for this community.

func (*RMON2MIB_TrapDestTable_TrapDestEntry) GetEntityData

func (trapDestEntry *RMON2MIB_TrapDestTable_TrapDestEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_TrapDestTable_TrapDestEntry_TrapDestProtocol

type RMON2MIB_TrapDestTable_TrapDestEntry_TrapDestProtocol string

RMON2MIB_TrapDestTable_TrapDestEntry_TrapDestProtocol represents The protocol with which to send this trap.

const (
	RMON2MIB_TrapDestTable_TrapDestEntry_TrapDestProtocol_ip RMON2MIB_TrapDestTable_TrapDestEntry_TrapDestProtocol = "ip"

	RMON2MIB_TrapDestTable_TrapDestEntry_TrapDestProtocol_ipx RMON2MIB_TrapDestTable_TrapDestEntry_TrapDestProtocol = "ipx"
)

type RMON2MIB_UsrHistoryControlTable

type RMON2MIB_UsrHistoryControlTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of parameters that set up a group of user-defined MIB objects to be
	// sampled periodically (called a bucket-group).  For example, an instance of
	// usrHistoryControlInterval might be named usrHistoryControlInterval.1. The
	// type is slice of RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry.
	UsrHistoryControlEntry []*RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry
}

RMON2MIB_UsrHistoryControlTable A list of data-collection configuration entries.

func (*RMON2MIB_UsrHistoryControlTable) GetEntityData

func (usrHistoryControlTable *RMON2MIB_UsrHistoryControlTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry

type RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. An index that uniquely identifies an entry in the
	// usrHistoryControlTable.  Each such entry defines a set of samples at a
	// particular interval for a specified set of MIB instances available from the
	// managed system. The type is interface{} with range: 1..65535.
	UsrHistoryControlIndex interface{}

	// The number of MIB objects to be collected in the portion of usrHistoryTable
	// associated with this usrHistoryControlEntry.  This object may not be
	// modified if the associated instance of usrHistoryControlStatus is equal to
	// active(1). The type is interface{} with range: 1..65535.
	UsrHistoryControlObjects interface{}

	// The requested number of discrete time intervals over which data is to be
	// saved in the part of the usrHistoryTable associated with this
	// usrHistoryControlEntry.  When this object is created or modified, the probe
	// should set usrHistoryControlBucketsGranted as closely to this object as is
	// possible for the particular probe implementation and available resources.
	// The type is interface{} with range: 1..65535.
	UsrHistoryControlBucketsRequested interface{}

	// The number of discrete sampling intervals over which data shall be saved in
	// the part of the usrHistoryTable associated with this
	// usrHistoryControlEntry.  When the associated
	// usrHistoryControlBucketsRequested      object is created or modified, the
	// probe should set this object as closely to the requested value as is
	// possible for the particular  probe implementation and available resources.
	// The probe must not lower this value except as a result of a modification to
	// the associated usrHistoryControlBucketsRequested object.  The associated
	// usrHistoryControlBucketsRequested object should be set before or at the
	// same time as this object to allow the probe to accurately estimate the
	// resources required for this usrHistoryControlEntry.  There will be times
	// when the actual number of buckets associated with this entry is less than
	// the value of this object.  In this case, at the end of each sampling
	// interval, a new bucket will be added to the usrHistoryTable.  When the
	// number of buckets reaches the value of this object and a new bucket is to
	// be added to the usrHistoryTable, the oldest bucket associated with this
	// usrHistoryControlEntry shall be deleted by the agent so that the new bucket
	// can be added.  When the value of this object changes to a value less than
	// the current value, entries are deleted from the usrHistoryTable associated
	// with this usrHistoryControlEntry. Enough of the oldest of these entries
	// shall be deleted by the agent so that their number remains less than or
	// equal to the new value of this object.  When the value of this object
	// changes to a value greater than the current value, the number of associated
	// usrHistory entries may be allowed to grow. The type is interface{} with
	// range: 1..65535.
	UsrHistoryControlBucketsGranted interface{}

	// The interval in seconds over which the data is sampled for each bucket in
	// the part of the usrHistory table associated with this
	// usrHistoryControlEntry.  Because the counters in a bucket may overflow at
	// their maximum value with no indication, a prudent manager will take into
	// account the possibility of overflow in any of      the associated counters.
	// It is important to consider the minimum time in which any counter could
	// overflow on a particular media type and set the usrHistoryControlInterval
	// object to a value less than this interval.  This object may not be modified
	// if the associated usrHistoryControlStatus object is equal to active(1). The
	// type is interface{} with range: 1..2147483647.
	UsrHistoryControlInterval interface{}

	// The entity that configured this entry and is therefore using the resources
	// assigned to it. The type is string with length: 0..127.
	UsrHistoryControlOwner interface{}

	// The status of this variable history control entry.  An entry may not exist
	// in the active state unless all objects in the entry have an appropriate
	// value.  If this object is not equal to active(1), all associated entries in
	// the usrHistoryTable shall be deleted. The type is RowStatus.
	UsrHistoryControlStatus interface{}
}

RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry A list of parameters that set up a group of user-defined MIB objects to be sampled periodically (called a bucket-group).

For example, an instance of usrHistoryControlInterval might be named usrHistoryControlInterval.1

func (*RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry) GetEntityData

func (usrHistoryControlEntry *RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_UsrHistoryObjectTable

type RMON2MIB_UsrHistoryObjectTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A list of MIB instances to be sampled periodically.  Entries in this table
	// are created when an associated usrHistoryControlObjects object is created.
	// The usrHistoryControlIndex value in the index is that of the associated
	// usrHistoryControlEntry.  For example, an instance of
	// usrHistoryObjectVariable might be usrHistoryObjectVariable.1.3. The type is
	// slice of RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry.
	UsrHistoryObjectEntry []*RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry
}

RMON2MIB_UsrHistoryObjectTable A list of data-collection configuration entries.

func (*RMON2MIB_UsrHistoryObjectTable) GetEntityData

func (usrHistoryObjectTable *RMON2MIB_UsrHistoryObjectTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry

type RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry_UsrHistoryControlIndex
	UsrHistoryControlIndex interface{}

	// This attribute is a key. An index used to uniquely identify an entry in the
	// usrHistoryObject table.  Each such entry defines a MIB instance to be
	// collected periodically. The type is interface{} with range: 1..65535.
	UsrHistoryObjectIndex interface{}

	// The object identifier of the particular variable to be sampled.  Only
	// variables that resolve to an ASN.1 primitive type of Integer32 (Integer32,
	// Counter, Gauge, or TimeTicks) may be sampled.  Because SNMP access control
	// is articulated entirely in terms of the contents of MIB views, no access
	// control mechanism exists that can restrict the value of this object to
	// identify only those objects that exist in a particular MIB view. Because
	// there is thus no acceptable means of restricting the read access that could
	// be obtained through the user history      mechanism, the probe must only
	// grant write access to this object in those views that have read access to
	// all objects on the probe.  During a set operation, if the supplied variable
	// name is not available in the selected MIB view, a badValue error must be
	// returned.  This object may not be modified if the associated
	// usrHistoryControlStatus object is equal to active(1). The type is string
	// with pattern:
	// (([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))(\.(0|([1-9]\d*)))*.
	UsrHistoryObjectVariable interface{}

	// The method of sampling the selected variable for storage in the
	// usrHistoryTable.  If the value of this object is absoluteValue(1), the
	// value of the selected variable will be copied directly into the history
	// bucket.  If the value of this object is deltaValue(2), the value of the
	// selected variable at the last sample will be subtracted from the current
	// value, and the difference will be stored in the history bucket. If the
	// associated usrHistoryObjectVariable instance could not be obtained at the
	// previous sample interval, then a delta sample is not possible, and the
	// value of the associated usrHistoryValStatus object for this interval will
	// be valueNotAvailable(1).  This object may not be modified if the associated
	// usrHistoryControlStatus object is equal to active(1). The type is
	// UsrHistoryObjectSampleType.
	UsrHistoryObjectSampleType interface{}
}

RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry A list of MIB instances to be sampled periodically.

Entries in this table are created when an associated usrHistoryControlObjects object is created.

The usrHistoryControlIndex value in the index is that of the associated usrHistoryControlEntry.

For example, an instance of usrHistoryObjectVariable might be usrHistoryObjectVariable.1.3

func (*RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry) GetEntityData

func (usrHistoryObjectEntry *RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry_UsrHistoryObjectSampleType

type RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry_UsrHistoryObjectSampleType string

RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry_UsrHistoryObjectSampleType represents usrHistoryControlStatus object is equal to active(1).

const (
	RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry_UsrHistoryObjectSampleType_absoluteValue RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry_UsrHistoryObjectSampleType = "absoluteValue"

	RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry_UsrHistoryObjectSampleType_deltaValue RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry_UsrHistoryObjectSampleType = "deltaValue"
)

type RMON2MIB_UsrHistoryTable

type RMON2MIB_UsrHistoryTable struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter

	// A historical sample of user-defined variables.  This sample is associated
	// with the usrHistoryControlEntry which set up the parameters for a regular
	// collection of these samples.  The usrHistoryControlIndex value in the index
	// identifies the usrHistoryControlEntry on whose behalf this entry was
	// created.  The usrHistoryObjectIndex value in the index identifies the
	// usrHistoryObjectEntry on whose behalf this entry was created.  For example,
	// an instance of usrHistoryAbsValue, which represents the 14th sample of a
	// variable collected as specified by usrHistoryControlEntry.1 and
	// usrHistoryObjectEntry.1.5, would be named usrHistoryAbsValue.1.14.5. The
	// type is slice of RMON2MIB_UsrHistoryTable_UsrHistoryEntry.
	UsrHistoryEntry []*RMON2MIB_UsrHistoryTable_UsrHistoryEntry
}

RMON2MIB_UsrHistoryTable A list of user defined history entries.

func (*RMON2MIB_UsrHistoryTable) GetEntityData

func (usrHistoryTable *RMON2MIB_UsrHistoryTable) GetEntityData() *types.CommonEntityData

type RMON2MIB_UsrHistoryTable_UsrHistoryEntry

type RMON2MIB_UsrHistoryTable_UsrHistoryEntry struct {
	EntityData types.CommonEntityData
	YFilter    yfilter.YFilter
	YListKey   string

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_UsrHistoryControlTable_UsrHistoryControlEntry_UsrHistoryControlIndex
	UsrHistoryControlIndex interface{}

	// This attribute is a key. An index that uniquely identifies the particular
	// sample this entry represents among all samples associated with the same
	// usrHistoryControlEntry. This index starts at 1 and increases by one as each
	// new sample is taken. The type is interface{} with range: 1..2147483647.
	UsrHistorySampleIndex interface{}

	// This attribute is a key. The type is string with range: 1..65535. Refers to
	// rmon2_mib.RMON2MIB_UsrHistoryObjectTable_UsrHistoryObjectEntry_UsrHistoryObjectIndex
	UsrHistoryObjectIndex interface{}

	// The value of sysUpTime at the start of the interval over which this sample
	// was measured.  If the probe keeps track of the time of day, it should start
	// the first sample of the history at a time such that when the next hour of
	// the day begins, a sample is started at that instant.  Note that following
	// this rule may require the probe to delay collecting the first sample of the
	// history, as each sample must be of the same interval. Also note that the
	// sample which is currently being collected is not accessible in this table
	// until the end of its interval. The type is interface{} with range:
	// 0..4294967295.
	UsrHistoryIntervalStart interface{}

	// The value of sysUpTime at the end of the interval over which this sample
	// was measured. The type is interface{} with range: 0..4294967295.
	UsrHistoryIntervalEnd interface{}

	// The absolute value (i.e. unsigned value) of the user-specified statistic
	// during the last sampling period. The value during the current sampling
	// period is not made available until the period is completed.  To obtain the
	// true value for this sampling interval, the associated instance of
	// usrHistoryValStatus must be checked, and usrHistoryAbsValue adjusted as
	// necessary.  If the MIB instance could not be accessed during the sampling
	// interval, then this object will have a value of zero and the associated
	// instance of usrHistoryValStatus will be set to 'valueNotAvailable(1)'. The
	// type is interface{} with range: 0..4294967295.
	UsrHistoryAbsValue interface{}

	// This object indicates the validity and sign of the data in the associated
	// instance of usrHistoryAbsValue.  If the MIB instance could not be accessed
	// during the sampling interval, then 'valueNotAvailable(1)' will be returned.
	// If the sample is valid and actual value of the sample is greater than or
	// equal to zero then 'valuePositive(2)' is returned.  If the sample is valid
	// and the actual value of the sample is less than zero, 'valueNegative(3)'
	// will be returned. The associated instance of usrHistoryAbsValue should be
	// multiplied by -1 to obtain the true sample value. The type is
	// UsrHistoryValStatus.
	UsrHistoryValStatus interface{}
}

RMON2MIB_UsrHistoryTable_UsrHistoryEntry A historical sample of user-defined variables. This sample is associated with the usrHistoryControlEntry which set up the parameters for a regular collection of these samples.

The usrHistoryControlIndex value in the index identifies the usrHistoryControlEntry on whose behalf this entry was created.

The usrHistoryObjectIndex value in the index identifies the usrHistoryObjectEntry on whose behalf this entry was created.

For example, an instance of usrHistoryAbsValue, which represents the 14th sample of a variable collected as specified by usrHistoryControlEntry.1 and usrHistoryObjectEntry.1.5, would be named usrHistoryAbsValue.1.14.5

func (*RMON2MIB_UsrHistoryTable_UsrHistoryEntry) GetEntityData

func (usrHistoryEntry *RMON2MIB_UsrHistoryTable_UsrHistoryEntry) GetEntityData() *types.CommonEntityData

type RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus

type RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus string

RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus represents by -1 to obtain the true sample value.

const (
	RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus_valueNotAvailable RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus = "valueNotAvailable"

	RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus_valuePositive RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus = "valuePositive"

	RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus_valueNegative RMON2MIB_UsrHistoryTable_UsrHistoryEntry_UsrHistoryValStatus = "valueNegative"
)

Source Files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
t or T : Toggle theme light dark auto
y or Y : Canonical URL