dhcp4

package module
v0.0.0-...-305e372 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jul 15, 2015 License: BSD-3-Clause, MIT Imports: 6 Imported by: 0

README

DHCP4 - A DHCP library written in Go.

Info

This code is fork of http://godoc.org/github.com/krolaw/dhcp4 for future modification and integral part of provisioning system for DOCSIS network.

Author

Marcin 'Spock' Jurczuk

Initial code auhor

http://richard.warburton.it/

Quick Start

See dhcpd folder how to use this library to create a basic server.

Documentation

http://godoc.org/github.com/mrspock/dhcp4

Thanks

Special thanks to https://github.com/pietern for suggesting how to use go.net to be able to listen on a single network interface.

Documentation

Overview

IPv4 DHCP Library for Parsing and Creating DHCP Packets, along with basic DHCP server functionality

Author: http://richard.warburton.it/

Copyright: 2014 Skagerrak Software - http://www.skagerraksoftware.com/

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func IPAdd 

func IPAdd(start net.IP, add int) net.IP

IPAdd returns a copy of start + add. IPAdd(net.IP{192,168,1,1},30) returns net.IP{192.168.1.31}

func IPInRange 

func IPInRange(start, stop, ip net.IP) bool

IPInRange returns true if ip is between (inclusive) start and stop.

func IPLess 

func IPLess(a, b net.IP) bool

IPLess returns where IP a is less than IP b.

func IPRange 

func IPRange(start, stop net.IP) int

IPRange returns how many ips in the ip range from start to stop (inclusive)

func JoinIPs 

func JoinIPs(ips []net.IP) (b []byte)

JoinIPs returns a byte slice of IP addresses, one immediately after the other This may be useful for creating multiple IP options such as OptionRouter.

func ListenAndServe 

func ListenAndServe(handler Handler) error

ListenAndServe listens on the UDP network address addr and then calls Serve with handler to handle requests on incoming packets.

func ListenAndServeIf 

func ListenAndServeIf(interfaceName string, handler Handler) error

ListenAndServe listens on the UDP network address addr and then calls Serve with handler to handle requests on incoming packets. i.e. ListenAndServeIf("eth0",handler)

func OptionsLeaseTime 

func OptionsLeaseTime(d time.Duration) []byte

OptionsLeaseTime - converts a time.Duration to a 4 byte slice, compatible with OptionIPAddressLeaseTime.

func Serve 

func Serve(conn ServeConn, handler Handler) error

Serve takes a ServeConn (such as a net.PacketConn) that it uses for both reading and writing DHCP packets. Every packet is passed to the handler, which processes it and optionally return a response packet for writing back to the network.

To capture limited broadcast packets (sent to 255.255.255.255), you must listen on a socket bound to IP_ADDRANY (0.0.0.0). This means that broadcast packets sent to any interface on the system may be delivered to this socket. See: https://code.google.com/p/go/issues/detail?id=7106

Additionally, response packets may not return to the same interface that the request was received from. Writing a custom ServeConn, or using ServeIf() can provide a workaround to this problem.

func ServeIf 

func ServeIf(ifIndex int, conn net.PacketConn, handler Handler) error

ServeIf does the same job as Serve(), but listens and responds on the specified network interface (by index). It also doubles as an example of how to leverage the dhcp4.ServeConn interface.

If your target only has one interface, use Serve(). ServeIf() requires an import outside the std library. Serving DHCP over multiple interfaces will require your own dhcp4.ServeConn, as listening to broadcasts utilises all interfaces (so you cannot have more than on listener).

Types

type Handler 

type Handler interface {
	ServeDHCP(req Packet, msgType MessageType, options Options) Packet
}

type MessageType 

type MessageType byte // Option 53

const (
	Discover MessageType = 1 // Broadcast Packet From Client - Can I have an IP?
	Offer    MessageType = 2 // Broadcast From Server - Here's an IP
	Request  MessageType = 3 // Broadcast From Client - I'll take that IP (Also start for renewals)
	Decline  MessageType = 4 // Broadcast From Client - Sorry I can't use that IP
	ACK      MessageType = 5 // From Server, Yes you can have that IP
	NAK      MessageType = 6 // From Server, No you cannot have that IP
	Release  MessageType = 7 // From Client, I don't need that IP anymore
	Inform   MessageType = 8 // From Client, I have this IP and there's nothing you can do about it
)

DHCP Message Type 53

func (MessageType) String 

func (i MessageType) String() string

type OpCode 

type OpCode byte
const (
	BootRequest OpCode = 1 // From Client
	BootReply   OpCode = 2 // From Server
)

OpCodes

type Option 

type Option struct {
	Code  OptionCode
	Value []byte
}

type OptionCode 

type OptionCode byte
const (
	End                          OptionCode = 255
	Pad                          OptionCode = 0
	OptionSubnetMask             OptionCode = 1
	OptionTimeOffset             OptionCode = 2
	OptionRouter                 OptionCode = 3
	OptionTimeServer             OptionCode = 4
	OptionNameServer             OptionCode = 5
	OptionDomainNameServer       OptionCode = 6
	OptionLogServer              OptionCode = 7
	OptionCookieServer           OptionCode = 8
	OptionLPRServer              OptionCode = 9
	OptionImpressServer          OptionCode = 10
	OptionResourceLocationServer OptionCode = 11
	OptionHostName               OptionCode = 12
	OptionBootFileSize           OptionCode = 13
	OptionMeritDumpFile          OptionCode = 14
	OptionDomainName             OptionCode = 15
	OptionSwapServer             OptionCode = 16
	OptionRootPath               OptionCode = 17
	OptionExtensionsPath         OptionCode = 18

	// IP Layer Parameters per Host
	OptionIPForwardingEnableDisable          OptionCode = 19
	OptionNonLocalSourceRoutingEnableDisable OptionCode = 20
	OptionPolicyFilter                       OptionCode = 21
	OptionMaximumDatagramReassemblySize      OptionCode = 22
	OptionDefaultIPTimeToLive                OptionCode = 23
	OptionPathMTUAgingTimeout                OptionCode = 24
	OptionPathMTUPlateauTable                OptionCode = 25

	// IP Layer Parameters per Interface
	OptionInterfaceMTU              OptionCode = 26
	OptionAllSubnetsAreLocal        OptionCode = 27
	OptionBroadcastAddress          OptionCode = 28
	OptionPerformMaskDiscovery      OptionCode = 29
	OptionMaskSupplier              OptionCode = 30
	OptionPerformRouterDiscovery    OptionCode = 31
	OptionRouterSolicitationAddress OptionCode = 32
	OptionStaticRoute               OptionCode = 33

	// Link Layer Parameters per Interface
	OptionTrailerEncapsulation  OptionCode = 34
	OptionARPCacheTimeout       OptionCode = 35
	OptionEthernetEncapsulation OptionCode = 36

	// TCP Parameters
	OptionTCPDefaultTTL        OptionCode = 37
	OptionTCPKeepaliveInterval OptionCode = 38
	OptionTCPKeepaliveGarbage  OptionCode = 39

	// Application and Service Parameters
	OptionNetworkInformationServiceDomain            OptionCode = 40
	OptionNetworkInformationServers                  OptionCode = 41
	OptionNetworkTimeProtocolServers                 OptionCode = 42
	OptionVendorSpecificInformation                  OptionCode = 43
	OptionNetBIOSOverTCPIPNameServer                 OptionCode = 44
	OptionNetBIOSOverTCPIPDatagramDistributionServer OptionCode = 45
	OptionNetBIOSOverTCPIPNodeType                   OptionCode = 46
	OptionNetBIOSOverTCPIPScope                      OptionCode = 47
	OptionXWindowSystemFontServer                    OptionCode = 48
	OptionXWindowSystemDisplayManager                OptionCode = 49
	OptionNetworkInformationServicePlusDomain        OptionCode = 64
	OptionNetworkInformationServicePlusServers       OptionCode = 65
	OptionMobileIPHomeAgent                          OptionCode = 68
	OptionSimpleMailTransportProtocol                OptionCode = 69
	OptionPostOfficeProtocolServer                   OptionCode = 70
	OptionNetworkNewsTransportProtocol               OptionCode = 71
	OptionDefaultWorldWideWebServer                  OptionCode = 72
	OptionDefaultFingerServer                        OptionCode = 73
	OptionDefaultInternetRelayChatServer             OptionCode = 74
	OptionStreetTalkServer                           OptionCode = 75
	OptionStreetTalkDirectoryAssistance              OptionCode = 76

	OptionRelayAgentInformation OptionCode = 82

	// DHCP Extensions
	OptionRequestedIPAddress     OptionCode = 50
	OptionIPAddressLeaseTime     OptionCode = 51
	OptionOverload               OptionCode = 52
	OptionDHCPMessageType        OptionCode = 53
	OptionServerIdentifier       OptionCode = 54
	OptionParameterRequestList   OptionCode = 55
	OptionMessage                OptionCode = 56
	OptionMaximumDHCPMessageSize OptionCode = 57
	OptionRenewalTimeValue       OptionCode = 58
	OptionRebindingTimeValue     OptionCode = 59
	OptionVendorClassIdentifier  OptionCode = 60
	OptionClientIdentifier       OptionCode = 61

	OptionTFTPServerName OptionCode = 66
	OptionBootFileName   OptionCode = 67

	OptionUserClass OptionCode = 77

	OptionClientArchitecture OptionCode = 93

	OptionTZPOSIXString    OptionCode = 100
	OptionTZDatabaseString OptionCode = 101

	OptionClasslessRouteFormat OptionCode = 121
)

DHCP Options

func (OptionCode) String 

func (i OptionCode) String() string

type Options 

type Options map[OptionCode][]byte

Map of DHCP options

func (Options) SelectOrder 

func (o Options) SelectOrder(order []byte) []Option

SelectOrder returns a slice of options ordered and selected by a byte array usually defined by OptionParameterRequestList. This result is expected to be used in ReplyPacket()'s []Option parameter.

func (Options) SelectOrderOrAll 

func (o Options) SelectOrderOrAll(order []byte) []Option

SelectOrderOrAll has same functionality as SelectOrder, except if the order param is nil, whereby all options are added (in arbitary order).

type Packet 

type Packet []byte

A DHCP packet

func NewPacket 

func NewPacket(opCode OpCode) Packet

func ReplyPacket 

func ReplyPacket(req Packet, mt MessageType, serverId, yIAddr net.IP, leaseDuration time.Duration, options []Option) Packet

ReplyPacket creates a reply packet that a Server would send to a client. It uses the req Packet param to copy across common/necessary fields to associate the reply the request.

func RequestPacket 

func RequestPacket(mt MessageType, chAddr net.HardwareAddr, cIAddr net.IP, xId []byte, broadcast bool, options []Option) Packet

Creates a request packet that a Client would send to a server.

func (*Packet) AddOption 

func (p *Packet) AddOption(o OptionCode, value []byte)

Appends a DHCP option to the end of a packet

func (Packet) Broadcast 

func (p Packet) Broadcast() bool

func (Packet) CHAddr 

func (p Packet) CHAddr() net.HardwareAddr

func (Packet) CIAddr 

func (p Packet) CIAddr() net.IP

func (Packet) Cookie 

func (p Packet) Cookie() []byte

func (Packet) File 

func (p Packet) File() []byte

BOOTP legacy

func (Packet) Flags 

func (p Packet) Flags() []byte

func (Packet) GIAddr 

func (p Packet) GIAddr() net.IP

func (Packet) HLen 

func (p Packet) HLen() byte

func (Packet) HType 

func (p Packet) HType() byte

func (Packet) Hops 

func (p Packet) Hops() byte

func (Packet) OpCode 

func (p Packet) OpCode() OpCode

func (Packet) Options 

func (p Packet) Options() []byte

func (*Packet) PadToMinSize 

func (p *Packet) PadToMinSize()

func (Packet) ParseOptions 

func (p Packet) ParseOptions() Options

Parses the packet's options into an Options map

func (Packet) SIAddr 

func (p Packet) SIAddr() net.IP

func (Packet) SName 

func (p Packet) SName() []byte

BOOTP legacy

func (Packet) Secs 

func (p Packet) Secs() []byte

func (Packet) SetBroadcast 

func (p Packet) SetBroadcast(broadcast bool)

func (Packet) SetCHAddr 

func (p Packet) SetCHAddr(a net.HardwareAddr)

func (Packet) SetCIAddr 

func (p Packet) SetCIAddr(ip net.IP)

func (Packet) SetCookie 

func (p Packet) SetCookie(cookie []byte)

func (Packet) SetFile 

func (p Packet) SetFile(file []byte)

BOOTP legacy

func (Packet) SetFlags 

func (p Packet) SetFlags(flags []byte)

func (Packet) SetGIAddr 

func (p Packet) SetGIAddr(ip net.IP)

func (Packet) SetHType 

func (p Packet) SetHType(hType byte)

func (Packet) SetHops 

func (p Packet) SetHops(hops byte)

func (Packet) SetOpCode 

func (p Packet) SetOpCode(c OpCode)

func (Packet) SetSIAddr 

func (p Packet) SetSIAddr(ip net.IP)

func (Packet) SetSName 

func (p Packet) SetSName(sName []byte)

BOOTP legacy

func (Packet) SetSecs 

func (p Packet) SetSecs(secs []byte)

func (Packet) SetXId 

func (p Packet) SetXId(xId []byte)

func (Packet) SetYIAddr 

func (p Packet) SetYIAddr(ip net.IP)

func (*Packet) StripOptions 

func (p *Packet) StripOptions()

Removes all options from packet.

func (Packet) XId 

func (p Packet) XId() []byte

func (Packet) YIAddr 

func (p Packet) YIAddr() net.IP

type ServeConn 

type ServeConn interface {
	ReadFrom(b []byte) (n int, addr net.Addr, err error)
	WriteTo(b []byte, addr net.Addr) (n int, err error)
}

ServeConn is the bare minimum connection functions required by Serve() It allows you to create custom connections for greater control, such as ServeIfConn (see serverif.go), which locks to a given interface.

Source Files

View all Source files

Directories

Path Synopsis
Example of minimal DHCP server:
 Example of minimal DHCP server:

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.