vegeta

command module
v12.1.0+incompatible Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Oct 23, 2018 License: MIT Imports: 24 Imported by: 0

README

Vegeta Build Status Go Report Card GoDoc Gitter Donate

Vegeta is a versatile HTTP load testing tool built out of a need to drill HTTP services with a constant request rate. It can be used both as a command line utility and a library.

Vegeta

Install

Pre-compiled executables

Get them here.

Homebrew on Mac OS X

You can install Vegeta using the Homebrew package manager on Mac OS X:

$ brew update && brew install vegeta
Source

You need go installed and GOBIN in your PATH. Once that is done, run the command:

$ go get -u github.com/tsenart/vegeta

Versioning

Both the library and the CLI are versioned with SemVer v2.0.0.

After v8.0.0, the two components are versioned separately to better isolate breaking changes to each.

CLI releases are tagged with cli/vMAJOR.MINOR.PATCH and published on the Github releases page. As for the library, new versions are tagged with lib/vMAJOR.MINOR.PATCH but not published as a release.

Contributing

See CONTRIBUTING.md.

Usage manual

Usage: vegeta [global flags] <command> [command flags]

global flags:
  -cpus int
    	Number of CPUs to use (default 8)
  -profile string
    	Enable profiling of [cpu, heap]
  -version
    	Print version and exit

attack command:
  -body string
    	Requests body file
  -cert string
    	TLS client PEM encoded certificate file
  -connections int
    	Max open idle connections per target host (default 10000)
  -duration duration
    	Duration of the test [0 = forever]
  -format string
    	Targets format [http, json] (default "http")
  -h2c
    	Send HTTP/2 requests without TLS encryption
  -header value
    	Request header
  -http2
    	Send HTTP/2 requests when supported by the server (default true)
  -insecure
    	Ignore invalid server TLS certificates
  -keepalive
    	Use persistent connections (default true)
  -key string
    	TLS client PEM encoded private key file
  -laddr value
    	Local IP address (default 0.0.0.0)
  -lazy
    	Read targets lazily
  -max-body value
    	Maximum number of bytes to capture from response bodies. [-1 = no limit] (default -1)
  -name string
    	Attack name
  -output string
    	Output file (default "stdout")
  -rate value
    	Number of requests per time unit (default 50/1s)
  -redirects int
    	Number of redirects to follow. -1 will not follow but marks as success (default 10)
  -resolvers value
    	List of addresses (ip:port) to use for DNS resolution. Disables use of local system DNS. (comma separated list)
  -root-certs value
    	TLS root certificate files (comma separated list)
  -targets string
    	Targets file (default "stdin")
  -timeout duration
    	Requests timeout (default 30s)
  -workers uint
    	Initial number of workers (default 10)

encode command:
  -output string
    	Output file (default "stdout")
  -to string
    	Output encoding [csv, gob, json] (default "json")

plot command:
  -output string
    	Output file (default "stdout")
  -threshold int
    	Threshold of data points above which series are downsampled. (default 4000)
  -title string
    	Title and header of the resulting HTML page (default "Vegeta Plot")

report command:
  -every duration
    	Report interval
  -output string
    	Output file (default "stdout")
  -type string
    	Report type to generate [text, json, hist[buckets]] (default "text")

examples:
  echo "GET http://localhost/" | vegeta attack -duration=5s | tee results.bin | vegeta report
  vegeta report -type=json results.bin > metrics.json
  cat results.bin | vegeta plot > plot.html
  cat results.bin | vegeta report -type="hist[0,100ms,200ms,300ms]"
-cpus

Specifies the number of CPUs to be used internally. It defaults to the amount of CPUs available in the system.

-profile

Specifies which profiler to enable during execution. Both cpu and heap profiles are supported. It defaults to none.

-version

Prints the version and exits.

attack command
-body

Specifies the file whose content will be set as the body of every request unless overridden per attack target, see -targets.

-cert

Specifies the PEM encoded TLS client certificate file to be used with HTTPS requests. If -key isn't specified, it will be set to the value of this flag.

-connections

Specifies the maximum number of idle open connections per target host.

-duration

Specifies the amount of time to issue request to the targets. The internal concurrency structure's setup has this value as a variable. The actual run time of the test can be longer than specified due to the responses delay. Use 0 for an infinite attack.

-format

Specifies the targets format to decode.

json format

The JSON format makes integration with programs that produce targets dynamically easier. Each target is one JSON object in its own line. The method and url fields are required. If present, the body field must be base64 encoded. The generated JSON Schema defines the format in detail.

jq -ncM '{method: "GET", url: "http://goku", body: "Punch!" | @base64, header: {"Content-Type": ["text/plain"]}}' |
  vegeta attack -format=json -rate=100 | vegeta encode
http format

The http format almost resembles the plain-text HTTP message format defined in RFC 2616 but it doesn't support in-line HTTP bodies, only references to files that are loaded and used as request bodies (as exemplified below).

Although targets in this format can be produced by other programs, it was originally meant to be used by people writing targets by hand for simple use cases.

Here are a few examples of valid targets files in the http format:

Simple targets
GET http://goku:9090/path/to/dragon?item=ball
GET http://user:password@goku:9090/path/to
HEAD http://goku:9090/path/to/success
Targets with custom headers
GET http://user:password@goku:9090/path/to
X-Account-ID: 8675309

DELETE http://goku:9090/path/to/remove
Confirmation-Token: 90215
Authorization: Token DEADBEEF
Targets with custom bodies
POST http://goku:9090/things
@/path/to/newthing.json

PATCH http://goku:9090/thing/71988591
@/path/to/thing-71988591.json
Targets with custom bodies and headers
POST http://goku:9090/things
X-Account-ID: 99
@/path/to/newthing.json
-h2c

Specifies that HTTP2 requests are to be sent over TCP without TLS encryption.

-header

Specifies a request header to be used in all targets defined, see -targets. You can specify as many as needed by repeating the flag.

-http2

Specifies whether to enable HTTP/2 requests to servers which support it.

-insecure

Specifies whether to ignore invalid server TLS certificates.

-keepalive

Specifies whether to reuse TCP connections between HTTP requests.

-key

Specifies the PEM encoded TLS client certificate private key file to be used with HTTPS requests.

-laddr

Specifies the local IP address to be used.

-lazy

Specifies whether to read the input targets lazily instead of eagerly. This allows streaming targets into the attack command and reduces memory footprint. The trade-off is one of added latency in each hit against the targets.

-max-body

Specifies the maximum number of bytes to capture from the body of each response. Remaining unread bytes will be fully read but discarded. Set to -1 for no limit. It knows how to intepret values like these:

  • "10 MB" -> 10MB
  • "10240 g" -> 10TB
  • "2000" -> 2000B
  • "1tB" -> 1TB
  • "5 peta" -> 5PB
  • "28 kilobytes" -> 28KB
  • "1 gigabyte" -> 1GB
-name

Specifies the name of the attack to be recorded in responses.

-output

Specifies the output file to which the binary results will be written to. Made to be piped to the report command input. Defaults to stdout.

-rate

Specifies the request rate per time unit to issue against the targets. The actual request rate can vary slightly due to things like garbage collection, but overall it should stay very close to the specified. If no time unit is provided, 1s is used.

-redirects

Specifies the max number of redirects followed on each request. The default is 10. When the value is -1, redirects are not followed but the response is marked as successful.

-resolvers

Specifies custom DNS resolver addresses to use for name resolution instead of the ones configured by the operating system. Works only on non Windows systems.

-root-certs

Specifies the trusted TLS root CAs certificate files as a comma separated list. If unspecified, the default system CAs certificates will be used.

-targets

Specifies the file from which to read targets, defaulting to stdin. See the -format section to learn about the different target formats.

-timeout

Specifies the timeout for each request. The default is 0 which disables timeouts.

-workers

Specifies the initial number of workers used in the attack. The actual number of workers will increase if necessary in order to sustain the requested rate.

report command
Usage: vegeta report [options] [<file>...]

Outputs a report of attack results.

Arguments:
  <file>  A file with vegeta attack results encoded with one of
          the supported encodings (gob | json | csv) [default: stdin]

Options:
  --type    Which report type to generate (text | json | hist[buckets]).
            [default: text]

  --every   Write the report to --output at every given interval (e.g 100ms)
            The default of 0 means the report will only be written after
            all results have been processed. [default: 0]

  --output  Output file [default: stdout]

Examples:
  echo "GET http://:80" | vegeta attack -rate=10/s > results.gob
  echo "GET http://:80" | vegeta attack -rate=100/s | vegeta encode > results.json
  vegeta report results.*
report -type=text
Requests      [total, rate]             1200, 120.00
Duration      [total, attack, wait]     10.094965987s, 9.949883921s, 145.082066ms
Latencies     [mean, 50, 95, 99, max]   113.172398ms, 108.272568ms, 140.18235ms, 247.771566ms, 264.815246ms
Bytes In      [total, mean]             3714690, 3095.57
Bytes Out     [total, mean]             0, 0.00
Success       [ratio]                   55.42%
Status Codes  [code:count]              0:535  200:665
Error Set:
Get http://localhost:6060: dial tcp 127.0.0.1:6060: connection refused
Get http://localhost:6060: read tcp 127.0.0.1:6060: connection reset by peer
Get http://localhost:6060: dial tcp 127.0.0.1:6060: connection reset by peer
Get http://localhost:6060: write tcp 127.0.0.1:6060: broken pipe
Get http://localhost:6060: net/http: transport closed before response was received
Get http://localhost:6060: http: can't write HTTP request on broken connection
report -type=json
{
  "latencies": {
    "total": 237119463,
    "mean": 2371194,
    "50th": 2854306,
    "95th": 3478629,
    "99th": 3530000,
    "max": 3660505
  },
  "bytes_in": {
    "total": 606700,
    "mean": 6067
  },
  "bytes_out": {
    "total": 0,
    "mean": 0
  },
  "earliest": "2015-09-19T14:45:50.645818631+02:00",
  "latest": "2015-09-19T14:45:51.635818575+02:00",
  "end": "2015-09-19T14:45:51.639325797+02:00",
  "duration": 989999944,
  "wait": 3507222,
  "requests": 100,
  "rate": 101.01010672380401,
  "success": 1,
  "status_codes": {
    "200": 100
  },
  "errors": []
}
report -type=hist

Computes and prints a text based histogram for the given buckets. Each bucket upper bound is non-inclusive.

cat results.bin | vegeta report -type='hist[0,2ms,4ms,6ms]'
Bucket         #     %       Histogram
[0,     2ms]   6007  32.65%  ########################
[2ms,   4ms]   5505  29.92%  ######################
[4ms,   6ms]   2117  11.51%  ########
[6ms,   +Inf]  4771  25.93%  ###################
encode command
Usage: vegeta encode [options] [<file>...]

Encodes vegeta attack results from one encoding to another.
The supported encodings are Gob (binary), CSV and JSON.
Each input file may have a different encoding which is detected
automatically.

The CSV encoder doesn't write a header. The columns written by it are:

  1. Unix timestamp in nanoseconds since epoch
  2. HTTP status code
  3. Request latency in nanoseconds
  4. Bytes out
  5. Bytes in
  6. Error
  7. Base64 encoded response body
  8. Attack name
  9. Sequence number of request

Arguments:
  <file>  A file with vegeta attack results encoded with one of
          the supported encodings (gob | json | csv) [default: stdin]

Options:
  --to      Output encoding (gob | json | csv) [default: json]
  --output  Output file [default: stdout]

Examples:
  echo "GET http://:80" | vegeta attack -rate=1/s > results.gob
  cat results.gob | vegeta encode | jq -c 'del(.body)' | vegeta encode -to gob
plot command

Plot

Usage: vegeta plot [options] [<file>...]

Outputs an HTML time series plot of request latencies over time.
The X axis represents elapsed time in seconds from the beginning
of the earliest attack in all input files. The Y axis represents
request latency in milliseconds.

Click and drag to select a region to zoom into. Double click to zoom out.
Choose a different number on the bottom left corner input field
to change the moving average window size (in data points).

Arguments:
  <file>  A file output by running vegeta attack [default: stdin]

Options:
  --title      Title and header of the resulting HTML page.
               [default: Vegeta Plot]
  --threshold  Threshold of data points to downsample series to.
               Series with less than --threshold number of data
               points are not downsampled. [default: 4000]

Examples:
  echo "GET http://:80" | vegeta attack -name=50qps -rate=50 -duration=5s > results.50qps.bin
  cat results.50qps.bin | vegeta plot > plot.50qps.html
  echo "GET http://:80" | vegeta attack -name=100qps -rate=100 -duration=5s > results.100qps.bin
  vegeta plot results.50qps.bin results.100qps.bin > plot.html

Usage: Distributed attacks

Whenever your load test can't be conducted due to Vegeta hitting machine limits such as open files, memory, CPU or network bandwidth, it's a good idea to use Vegeta in a distributed manner.

In a hypothetical scenario where the desired attack rate is 60k requests per second, let's assume we have 3 machines with vegeta installed.

Make sure open file descriptor and process limits are set to a high number for your user on each machine using the ulimit command.

We're ready to start the attack. All we need to do is to divide the intended rate by the number of machines, and use that number on each attack. Here we'll use pdsh for orchestration.

$ PDSH_RCMD_TYPE=ssh pdsh -b -w '10.0.1.1,10.0.2.1,10.0.3.1' \
    'echo "GET http://target/" | vegeta attack -rate=20000 -duration=60s > result.bin'

After the previous command finishes, we can gather the result files to use on our report.

$ for machine in 10.0.1.1 10.0.2.1 10.0.3.1; do
    scp $machine:~/result.bin $machine.bin &
  done

The report command accepts multiple result files. It'll read and sort them by timestamp before generating reports.

$ vegeta report 10.0.1.1.bin 10.0.2.1.bin 10.0.3.1.bin
Requests      [total, rate]         3600000, 60000.00
Latencies     [mean, 95, 99, max]   223.340085ms, 326.913687ms, 416.537743ms, 7.788103259s
Bytes In      [total, mean]         3714690, 3095.57
Bytes Out     [total, mean]         0, 0.00
Success       [ratio]               100.0%
Status Codes  [code:count]          200:3600000
Error Set:

Usage: Real-time Analysis

If you are a happy user of iTerm, you can integrate vegeta with jplot using jaggr to plot a vegeta report in real-time in the comfort of you terminal:

echo 'GET http://localhost:8080' | \
    vegeta attack -rate 5000 -duration 10m | vegeta encode | \
    jaggr @count=rps \
          hist\[100,200,300,400,500\]:code \
          p25,p50,p95:latency \
          sum:bytes_in \
          sum:bytes_out | \
    jplot rps+code.hist.100+code.hist.200+code.hist.300+code.hist.400+code.hist.500 \
          latency.p95+latency.p50+latency.p25 \
          bytes_in.sum+bytes_out.sum

Usage (Library)

The library versioning follows SemVer v2.0.0. Since lib/v9.0.0, the library and cli are versioned separately to better isolate breaking changes to each component.

package main

import (
  "fmt"
  "time"

  vegeta "github.com/tsenart/vegeta/lib"
)

func main() {
  rate := vegeta.Rate{Freq: 100, Per: time.Second}
  duration := 4 * time.Second
  targeter := vegeta.NewStaticTargeter(vegeta.Target{
    Method: "GET",
    URL:    "http://localhost:9100/",
  })
  attacker := vegeta.NewAttacker()

  var metrics vegeta.Metrics
  for res := range attacker.Attack(targeter, rate, duration, "Big Bang!") {
    metrics.Add(res)
  }
  metrics.Close()

  fmt.Printf("99th percentile: %s\n", metrics.Latencies.P99)
}
Limitations

There will be an upper bound of the supported rate which varies on the machine being used. You could be CPU bound (unlikely), memory bound (more likely) or have system resource limits being reached which ought to be tuned for the process execution. The important limits for us are file descriptors and processes. On a UNIX system you can get and set the current soft-limit values for a user.

$ ulimit -n # file descriptors
2560
$ ulimit -u # processes / threads
709

Just pass a new number as the argument to change it.

License

See LICENSE.

Donate

If you use and love Vegeta, please consider sending some Satoshi to 1MDmKC51ve7Upxt75KoNM6x1qdXHFK6iW2. In case you want to be mentioned as a sponsor, let me know!

Donate Bitcoin

Documentation

The Go Gopher

There is no documentation for this package.

Directories

Path Synopsis
internal
lib
This file has been modified from the original generated code to make it work with type alias jsonResult so that the methods aren't exposed in Result.
This file has been modified from the original generated code to make it work with type alias jsonResult so that the methods aren't exposed in Result.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL