README
¶
Plan 9 Crypto Monorepo
While all of the API's are in development there is intermittent and very neccessary changes that break everything, everything is being piled into this repository in order to simplify several aspects of the work.
Building
go run ./pod/podbuild/. builder
podbuild install
For other commands
podbuild help
A one-liner to run the node:
go get github.com/p9c/monorepo/pod/podbuild; go run github.com/p9c/monorepo/pod/podbuild node
Note that the podbuild isn't essential to use but without it, the build will not split file paths correctly,
and your logs will be very ugly.
- @l0k18
Directories
¶
| Path | Synopsis |
|---|---|
|
appdata
module
|
|
|
apputil
module
|
|
|
Package node is a full-node Parallelcoin implementation written in Go.
|
Package node is a full-node Parallelcoin implementation written in Go. |
|
integration/rpctest
Package rpctest provides a pod-specific RPC testing harness crafting and executing integration tests by driving a `pod` instance via the `RPC` interface.
|
Package rpctest provides a pod-specific RPC testing harness crafting and executing integration tests by driving a `pod` instance via the `RPC` interface. |
|
pkg
|
|
|
addrmgr
Package addrmgr implements concurrency safe Bitcoin address manager.
|
Package addrmgr implements concurrency safe Bitcoin address manager. |
|
base58
Package base58 provides an API for working with modified base58 and Base58Check encodings.
|
Package base58 provides an API for working with modified base58 and Base58Check encodings. |
|
blockchain
Package blockchain implements bitcoin block handling and chain selection rules.
|
Package blockchain implements bitcoin block handling and chain selection rules. |
|
btcjson
Package btcjson provides primitives for working with the bitcoin JSON-RPC API.
|
Package btcjson provides primitives for working with the bitcoin JSON-RPC API. |
|
chaincfg
Package chaincfg defines chain configuration parameters.
|
Package chaincfg defines chain configuration parameters. |
|
chainhash
Package chainhash provides abstracted hash functionality.
|
Package chainhash provides abstracted hash functionality. |
|
connmgr
Package connmgr implements a generic Bitcoin network connection manager.
|
Package connmgr implements a generic Bitcoin network connection manager. |
|
control/hashrate
Package hashrate is a message type for Simplebuffers generated by miners to broadcast an IP address, a count and version number and current height of mining work just completed.
|
Package hashrate is a message type for Simplebuffers generated by miners to broadcast an IP address, a count and version number and current height of mining work just completed. |
|
database
Package database provides a block and metadata storage database.
|
Package database provides a block and metadata storage database. |
|
database/ffldb
Package ffldb implements a driver for the database package that uses leveldb or the backing metadata and flat files for block storage.
|
Package ffldb implements a driver for the database package that uses leveldb or the backing metadata and flat files for block storage. |
|
ecc
Package ec implements support for the elliptic curves needed for bitcoin.
|
Package ec implements support for the elliptic curves needed for bitcoin. |
|
fec
Package fec implements Reed Solomon 9/3 forward error correction, intended to be sent as 9 pieces where 3 uncorrupted parts allows assembly of the message
|
Package fec implements Reed Solomon 9/3 forward error correction, intended to be sent as 9 pieces where 3 uncorrupted parts allows assembly of the message |
|
fork
Package fork handles tracking the hard fork status and is used to determine which consensus rules apply on a block
|
Package fork handles tracking the hard fork status and is used to determine which consensus rules apply on a block |
|
gcs
Package gcs provides an API for building and using a Golomb-coded set filter.
|
Package gcs provides an API for building and using a Golomb-coded set filter. |
|
icons
Package icons bundles the entire set of several icon sets into one package as maps to allow iteration
|
Package icons bundles the entire set of several icon sets into one package as maps to allow iteration |
|
indexers
Package indexers implements optional block chain indexes.
|
Package indexers implements optional block chain indexes. |
|
indexers/index
Package indexers implements optional block chain indexes.
|
Package indexers implements optional block chain indexes. |
|
mempool
Package mempool provides a policy-enforced pool of unmined bitcoin transactions.
|
Package mempool provides a policy-enforced pool of unmined bitcoin transactions. |
|
netsync
Package netsync implements a concurrency safe block syncing protocol.
|
Package netsync implements a concurrency safe block syncing protocol. |
|
peer
Package peer provides a common base for creating and managing Bitcoin network peers.
|
Package peer provides a common base for creating and managing Bitcoin network peers. |
|
pipe/consume
Package consume turns off and on the Serve logging messages and provides a way to receive and process the log messages
|
Package consume turns off and on the Serve logging messages and provides a way to receive and process the log messages |
|
pipe/serve
Package serve receives log.Entry messages on a channel and sends them when it has been told to Run by Consume, and pauses when it is told Pause
|
Package serve receives log.Entry messages on a channel and sends them when it has been told to Run by Consume, and pauses when it is told Pause |
|
podopts
Package podopts is a configuration system to fit with the all-in-one philosophy guiding the design of the parallelcoin pod.
|
Package podopts is a configuration system to fit with the all-in-one philosophy guiding the design of the parallelcoin pod. |
|
podopts/genopts
This generator reads a podcfg.Configs map and spits out a podcfg.Config struct
|
This generator reads a podcfg.Configs map and spits out a podcfg.Config struct |
|
rpcclient
Package rpcclient implements a websocket-enabled Bitcoin JSON-RPC client.
|
Package rpcclient implements a websocket-enabled Bitcoin JSON-RPC client. |
|
transport
Package transport provides a listener and sender channel for unicast and multicast UDP IPv4 short message chat protocol with a pre shared key, forward error correction facilities with a nice friendly declaration syntax
|
Package transport provides a listener and sender channel for unicast and multicast UDP IPv4 short message chat protocol with a pre shared key, forward error correction facilities with a nice friendly declaration syntax |
|
txauthor
Package txauthor provides transaction creation code for wallets.
|
Package txauthor provides transaction creation code for wallets. |
|
txrules
Package txrules provides transaction rules that should be followed by transaction authors for wide mempool acceptance and quick mining.
|
Package txrules provides transaction rules that should be followed by transaction authors for wide mempool acceptance and quick mining. |
|
txscript
Package txscript implements the bitcoin transaction script language.
|
Package txscript implements the bitcoin transaction script language. |
|
txsizes
Package txsizes Copyright (c) 2016 The btcsuite developers
|
Package txsizes Copyright (c) 2016 The btcsuite developers |
|
util
Package util provides bitcoin-specific convenience functions and types.
|
Package util provides bitcoin-specific convenience functions and types. |
|
util/hdkeychain
Package hdkeychain provides an API for bitcoin hierarchical deterministic extended keys (BIP0032).
|
Package hdkeychain provides an API for bitcoin hierarchical deterministic extended keys (BIP0032). |
|
util/helpers
Package helpers provides convenience functions to simplify wallet code.
|
Package helpers provides convenience functions to simplify wallet code. |
|
util/treap
Package treap implements a treap data structure that is used to hold ordered key/value pairs using a combination of binary search tree and heap semantics.
|
Package treap implements a treap data structure that is used to hold ordered key/value pairs using a combination of binary search tree and heap semantics. |
|
util/zero
Package zero Copyright (c) 2015 The btcsuite developers Package zero contains functions to clear data from byte slices and multi-precision integers.
|
Package zero Copyright (c) 2015 The btcsuite developers Package zero contains functions to clear data from byte slices and multi-precision integers. |
|
waddrmgr
Package waddrmgr provides a secure hierarchical deterministic wallet address manager.
|
Package waddrmgr provides a secure hierarchical deterministic wallet address manager. |
|
wallet
Package wallet Copyright (c) 2015-2016 The btcsuite developers Package wallet provides ...
|
Package wallet Copyright (c) 2015-2016 The btcsuite developers Package wallet provides ... |
|
walletdb
Package walletdb provides a namespaced database interface for btcwallet.
|
Package walletdb provides a namespaced database interface for btcwallet. |
|
walletdb/bdb
Package bdb implements an instance of walletdb that uses boltdb for the backing datastore.
|
Package bdb implements an instance of walletdb that uses boltdb for the backing datastore. |
|
walletdb/ci
Package ci provides exported tests that can be imported and consumed by walletdb driver tests to help ensure that drivers confirm to the database driver interface correctly.
|
Package ci provides exported tests that can be imported and consumed by walletdb driver tests to help ensure that drivers confirm to the database driver interface correctly. |
|
wire
Package wire implements the bitcoin wire protocol.
|
Package wire implements the bitcoin wire protocol. |
|
wtxmgr
Package wtxmgr provides an implementation of a transaction database handling spend tracking for a bitcoin wallet.
|
Package wtxmgr provides an implementation of a transaction database handling spend tracking for a bitcoin wallet. |
Click to show internal directories.
Click to hide internal directories.