types

Documentation

Index

• type BlobInfo
• type DockerAuthConfig
• type Image
• type ImageDestination
• type ImageInspectInfo
• type ImageReference
• type ImageSource
• type ImageTransport
• type ManifestUpdateInformation
• type ManifestUpdateOptions
• type SystemContext
• type UnparsedImage

Types

type BlobInfo

type BlobInfo struct {
	Digest digest.Digest // "" if unknown.
	Size   int64         // -1 if unknown
	URLs   []string
}

BlobInfo collects known information about a blob (layer/config). In some situations, some fields may be unknown, in others they may be mandatory; documenting an “unknown” value here does not override that.

type DockerAuthConfig

type DockerAuthConfig struct {
	Username string
	Password string
}

DockerAuthConfig contains authorization information for connecting to a registry.

type Image

type Image interface {
	// Note that Reference may return nil in the return value of UpdatedImage!
	UnparsedImage
	// ConfigInfo returns a complete BlobInfo for the separate config object, or a BlobInfo{Digest:""} if there isn't a separate object.
	// Note that the config object may not exist in the underlying storage in the return value of UpdatedImage! Use ConfigBlob() below.
	ConfigInfo() BlobInfo
	// ConfigBlob returns the blob described by ConfigInfo, iff ConfigInfo().Digest != ""; nil otherwise.
	// The result is cached; it is OK to call this however often you need.
	ConfigBlob() ([]byte, error)
	// LayerInfos returns a list of BlobInfos of layers referenced by this image, in order (the root layer first, and then successive layered layers).
	// The Digest field is guaranteed to be provided; Size may be -1.
	// WARNING: The list may contain duplicates, and they are semantically relevant.
	LayerInfos() []BlobInfo
	// Inspect returns various information for (skopeo inspect) parsed from the manifest and configuration.
	Inspect() (*ImageInspectInfo, error)
	// UpdatedImageNeedsLayerDiffIDs returns true iff UpdatedImage(options) needs InformationOnly.LayerDiffIDs.
	// This is a horribly specific interface, but computing InformationOnly.LayerDiffIDs can be very expensive to compute
	// (most importantly it forces us to download the full layers even if they are already present at the destination).
	UpdatedImageNeedsLayerDiffIDs(options ManifestUpdateOptions) bool
	// UpdatedImage returns a types.Image modified according to options.
	// Everything in options.InformationOnly should be provided, other fields should be set only if a modification is desired.
	// This does not change the state of the original Image object.
	UpdatedImage(options ManifestUpdateOptions) (Image, error)
	// IsMultiImage returns true if the image's manifest is a list of images, false otherwise.
	IsMultiImage() bool
}

Image is the primary API for inspecting properties of images. Each Image should eventually be closed by calling Close().

type ImageDestination

type ImageDestination interface {
	// Reference returns the reference used to set up this destination.  Note that this should directly correspond to user's intent,
	// e.g. it should use the public hostname instead of the result of resolving CNAMEs or following redirects.
	Reference() ImageReference
	// Close removes resources associated with an initialized ImageDestination, if any.
	Close()

	// SupportedManifestMIMETypes tells which manifest mime types the destination supports
	// If an empty slice or nil it's returned, then any mime type can be tried to upload
	SupportedManifestMIMETypes() []string
	// SupportsSignatures returns an error (to be displayed to the user) if the destination certainly can't store signatures.
	// Note: It is still possible for PutSignatures to fail if SupportsSignatures returns nil.
	SupportsSignatures() error
	// ShouldCompressLayers returns true iff it is desirable to compress layer blobs written to this destination.
	ShouldCompressLayers() bool

	// AcceptsForeignLayerURLs returns false iff foreign layers in manifest should be actually
	// uploaded to the image destination, true otherwise.
	AcceptsForeignLayerURLs() bool

	// PutBlob writes contents of stream and returns data representing the result (with all data filled in).
	// inputInfo.Digest can be optionally provided if known; it is not mandatory for the implementation to verify it.
	// inputInfo.Size is the expected length of stream, if known.
	// WARNING: The contents of stream are being verified on the fly.  Until stream.Read() returns io.EOF, the contents of the data SHOULD NOT be available
	// to any other readers for download using the supplied digest.
	// If stream.Read() at any time, ESPECIALLY at end of input, returns an error, PutBlob MUST 1) fail, and 2) delete any data stored so far.
	PutBlob(stream io.Reader, inputInfo BlobInfo) (BlobInfo, error)
	// FIXME? This should also receive a MIME type if known, to differentiate between schema versions.
	PutManifest([]byte) error
	PutSignatures(signatures [][]byte) error
	// Commit marks the process of storing the image as successful and asks for the image to be persisted.
	// WARNING: This does not have any transactional semantics:
	// - Uploaded data MAY be visible to others before Commit() is called
	// - Uploaded data MAY be removed or MAY remain around if Close() is called without Commit() (i.e. rollback is allowed but not guaranteed)
	Commit() error
}

ImageDestination is a service, possibly remote (= slow), to store components of a single image.

There is a specific required order for some of the calls: PutBlob on the various blobs, if any, MUST be called before PutManifest (manifest references blobs, which may be created or compressed only at push time) PutSignatures, if called, MUST be called after PutManifest (signatures reference manifest contents) Finally, Commit MUST be called if the caller wants the image, as formed by the components saved above, to persist.

Each ImageDestination should eventually be closed by calling Close().

type ImageInspectInfo

type ImageInspectInfo struct {
	Tag           string
	Created       time.Time
	DockerVersion string
	Labels        map[string]string
	Architecture  string
	Os            string
	Layers        []string
}

ImageInspectInfo is a set of metadata describing Docker images, primarily their manifest and configuration. The Tag field is a legacy field which is here just for the Docker v2s1 manifest. It won't be supported for other manifest types.

type ImageReference

type ImageReference interface {
	Transport() ImageTransport
	// StringWithinTransport returns a string representation of the reference, which MUST be such that
	// reference.Transport().ParseReference(reference.StringWithinTransport()) returns an equivalent reference.
	// NOTE: The returned string is not promised to be equal to the original input to ParseReference;
	// e.g. default attribute values omitted by the user may be filled in in the return value, or vice versa.
	// WARNING: Do not use the return value in the UI to describe an image, it does not contain the Transport().Name() prefix;
	// instead, see transports.ImageName().
	StringWithinTransport() string

	// DockerReference returns a Docker reference associated with this reference
	// (fully explicit, i.e. !reference.IsNameOnly, but reflecting user intent,
	// not e.g. after redirect or alias processing), or nil if unknown/not applicable.
	DockerReference() reference.Named

	// PolicyConfigurationIdentity returns a string representation of the reference, suitable for policy lookup.
	// This MUST reflect user intent, not e.g. after processing of third-party redirects or aliases;
	// The value SHOULD be fully explicit about its semantics, with no hidden defaults, AND canonical
	// (i.e. various references with exactly the same semantics should return the same configuration identity)
	// It is fine for the return value to be equal to StringWithinTransport(), and it is desirable but
	// not required/guaranteed that it will be a valid input to Transport().ParseReference().
	// Returns "" if configuration identities for these references are not supported.
	PolicyConfigurationIdentity() string

	// PolicyConfigurationNamespaces returns a list of other policy configuration namespaces to search
	// for if explicit configuration for PolicyConfigurationIdentity() is not set.  The list will be processed
	// in order, terminating on first match, and an implicit "" is always checked at the end.
	// It is STRONGLY recommended for the first element, if any, to be a prefix of PolicyConfigurationIdentity(),
	// and each following element to be a prefix of the element preceding it.
	PolicyConfigurationNamespaces() []string

	// NewImage returns a types.Image for this reference, possibly specialized for this ImageTransport.
	// The caller must call .Close() on the returned Image.
	// NOTE: If any kind of signature verification should happen, build an UnparsedImage from the value returned by NewImageSource,
	// verify that UnparsedImage, and convert it into a real Image via image.FromUnparsedImage.
	NewImage(ctx *SystemContext) (Image, error)
	// NewImageSource returns a types.ImageSource for this reference,
	// asking the backend to use a manifest from requestedManifestMIMETypes if possible.
	// nil requestedManifestMIMETypes means manifest.DefaultRequestedManifestMIMETypes.
	// The caller must call .Close() on the returned ImageSource.
	NewImageSource(ctx *SystemContext, requestedManifestMIMETypes []string) (ImageSource, error)
	// NewImageDestination returns a types.ImageDestination for this reference.
	// The caller must call .Close() on the returned ImageDestination.
	NewImageDestination(ctx *SystemContext) (ImageDestination, error)

	// DeleteImage deletes the named image from the registry, if supported.
	DeleteImage(ctx *SystemContext) error
}

ImageReference is an abstracted way to refer to an image location, namespaced within an ImageTransport.

The object should preferably be immutable after creation, with any parsing/state-dependent resolving happening within an ImageTransport.ParseReference() or equivalent API creating the reference object. That's also why the various identification/formatting methods of this type do not support returning errors.

WARNING: While this design freezes the content of the reference within this process, it can not freeze the outside world: paths may be replaced by symlinks elsewhere, HTTP APIs may start returning different results, and so on.

type ImageSource

type ImageSource interface {
	// Reference returns the reference used to set up this source, _as specified by the user_
	// (not as the image itself, or its underlying storage, claims).  This can be used e.g. to determine which public keys are trusted for this image.
	Reference() ImageReference
	// Close removes resources associated with an initialized ImageSource, if any.
	Close()
	// GetManifest returns the image's manifest along with its MIME type (which may be empty when it can't be determined but the manifest is available).
	// It may use a remote (= slow) service.
	GetManifest() ([]byte, string, error)
	// GetTargetManifest returns an image's manifest given a digest. This is mainly used to retrieve a single image's manifest
	// out of a manifest list.
	GetTargetManifest(digest digest.Digest) ([]byte, string, error)
	// GetBlob returns a stream for the specified blob, and the blob’s size (or -1 if unknown).
	// The Digest field in BlobInfo is guaranteed to be provided; Size may be -1.
	GetBlob(BlobInfo) (io.ReadCloser, int64, error)
	// GetSignatures returns the image's signatures.  It may use a remote (= slow) service.
	GetSignatures() ([][]byte, error)
}

ImageSource is a service, possibly remote (= slow), to download components of a single image. This is primarily useful for copying images around; for examining their properties, Image (below) is usually more useful. Each ImageSource should eventually be closed by calling Close().

WARNING: Various methods which return an object identified by digest generally do not validate that the returned data actually matches that digest; this is the caller’s responsibility.

type ImageTransport

type ImageTransport interface {
	// Name returns the name of the transport, which must be unique among other transports.
	Name() string
	// ParseReference converts a string, which should not start with the ImageTransport.Name prefix, into an ImageReference.
	ParseReference(reference string) (ImageReference, error)
	// ValidatePolicyConfigurationScope checks that scope is a valid name for a signature.PolicyTransportScopes keys
	// (i.e. a valid PolicyConfigurationIdentity() or PolicyConfigurationNamespaces() return value).
	// It is acceptable to allow an invalid value which will never be matched, it can "only" cause user confusion.
	// scope passed to this function will not be "", that value is always allowed.
	ValidatePolicyConfigurationScope(scope string) error
}

ImageTransport is a top-level namespace for ways to to store/load an image. It should generally correspond to ImageSource/ImageDestination implementations.

Note that ImageTransport is based on "ways the users refer to image storage", not necessarily on the underlying physical transport. For example, all Docker References would be used within a single "docker" transport, regardless of whether the images are pulled over HTTP or HTTPS (or, even, IPv4 or IPv6).

OTOH all images using the same transport should (apart from versions of the image format), be interoperable. For example, several different ImageTransport implementations may be based on local filesystem paths, but using completely different formats for the contents of that path (a single tar file, a directory containing tarballs, a fully expanded container filesystem, ...)

See also transports.KnownTransports.

type ManifestUpdateInformation

type ManifestUpdateInformation struct {
	Destination  ImageDestination // and yes, UpdatedManifest may write to Destination (see the schema2 → schema1 conversion logic in image/docker_schema2.go)
	LayerInfos   []BlobInfo       // Complete BlobInfos (size+digest) which have been uploaded, in order (the root layer first, and then successive layered layers)
	LayerDiffIDs []digest.Digest  // Digest values for the _uncompressed_ contents of the blobs which have been uploaded, in the same order.
}

ManifestUpdateInformation is a component of ManifestUpdateOptions, named here only to make writing struct literals possible.

type ManifestUpdateOptions

type ManifestUpdateOptions struct {
	LayerInfos       []BlobInfo // Complete BlobInfos (size+digest+urls) which should replace the originals, in order (the root layer first, and then successive layered layers)
	ManifestMIMEType string
	// The values below are NOT requests to modify the image; they provide optional context which may or may not be used.
	InformationOnly ManifestUpdateInformation
}

ManifestUpdateOptions is a way to pass named optional arguments to Image.UpdatedManifest

type SystemContext

type SystemContext struct {
	// If not "", prefixed to any absolute paths used by default by the library (e.g. in /etc/).
	// Not used for any of the more specific path overrides available in this struct.
	// Not used for any paths specified by users in config files (even if the location of the config file _was_ affected by it).
	// NOTE: If this is set, environment-variable overrides of paths are ignored (to keep the semantics simple: to create an /etc replacement, just set RootForImplicitAbsolutePaths .
	// and there is no need to worry about the environment.)
	// NOTE: This does NOT affect paths starting by $HOME.
	RootForImplicitAbsolutePaths string

	// === Global configuration overrides ===
	// If not "", overrides the system's default path for signature.Policy configuration.
	SignaturePolicyPath string
	// If not "", overrides the system's default path for registries.d (Docker signature storage configuration)
	RegistriesDirPath string

	// === docker.Transport overrides ===
	DockerCertPath              string // If not "", a directory containing "cert.pem" and "key.pem" used when talking to a Docker Registry
	DockerInsecureSkipTLSVerify bool   // Allow contacting docker registries over HTTP, or HTTPS with failed TLS verification. Note that this does not affect other TLS connections.
	// if nil, the library tries to parse ~/.docker/config.json to retrieve credentials
	DockerAuthConfig *DockerAuthConfig
	// if not "", an User-Agent header is added to each request when contacting a registry.
	DockerRegistryUserAgent string
}

SystemContext allows parametrizing access to implicitly-accessed resources, like configuration files in /etc and users' login state in their home directory. Various components can share the same field only if their semantics is exactly the same; if in doubt, add a new field. It is always OK to pass nil instead of a SystemContext.

type UnparsedImage

type UnparsedImage interface {
	// Reference returns the reference used to set up this source, _as specified by the user_
	// (not as the image itself, or its underlying storage, claims).  This can be used e.g. to determine which public keys are trusted for this image.
	Reference() ImageReference
	// Close removes resources associated with an initialized UnparsedImage, if any.
	Close()
	// Manifest is like ImageSource.GetManifest, but the result is cached; it is OK to call this however often you need.
	Manifest() ([]byte, string, error)
	// Signatures is like ImageSource.GetSignatures, but the result is cached; it is OK to call this however often you need.
	Signatures() ([][]byte, error)
}

UnparsedImage is an Image-to-be; until it is verified and accepted, it only caries its identity and caches manifest and signature blobs. Thus, an UnparsedImage can be created from an ImageSource simply by fetching blobs without interpreting them, allowing cryptographic signature verification to happen first, before even fetching the manifest, or parsing anything else. This also makes the UnparsedImage→Image conversion an explicitly visible step. Each UnparsedImage should eventually be closed by calling Close().