serial

README

THIS PACKAGE IS DEPRECATED BUT RETAINED FOR COMPATIBILITY.

Please use github.com/tarm/serial for future projects.

It is 99.9% compatible (it returns a concrete *Port instead of an io.ReadWriteCloser interface) while allowing room for future expansion. Please update your projects when you have the chance.

Documentation

Overview

Goserial is a simple go package to allow you to read and write from the serial port as a stream of bytes.

It aims to have the same API on all platforms, including windows. As an added bonus, the windows package does not use cgo, so you can cross compile for windows from another platform. Unfortunately goinstall does not currently let you cross compile so you will have to do it manually:

GOOS=windows make clean install

Currently there is very little in the way of configurability. You can set the baud rate. Then you can Read(), Write(), or Close() the connection. Read() will block until at least one byte is returned. Write is the same. There is currently no exposed way to set the timeouts, though patches are welcome.

Currently all ports are opened with 8 data bits, 1 stop bit, no parity, no hardware flow control, and no software flow control. This works fine for many real devices and many faux serial devices including usb-to-serial converters and bluetooth serial ports.

You may Read() and Write() simulantiously on the same connection (from different goroutines).

Example usage:

package main

import (
      "github.com/tarm/goserial"
      "log"
)

func main() {
      c := &serial.Config{Name: "COM5", Baud: 115200}
      s, err := serial.OpenPort(c)
      if err != nil {
              log.Fatal(err)
      }

      n, err := s.Write([]byte("test"))
      if err != nil {
              log.Fatal(err)
      }

      buf := make([]byte, 128)
      n, err = s.Read(buf)
      if err != nil {
              log.Fatal(err)
      }
      log.Print("%q", buf[:n])
}

Index

• func OpenPort(c *Config) (io.ReadWriteCloser, error)
• type Config

Functions

func OpenPort

func OpenPort(c *Config) (io.ReadWriteCloser, error)

OpenPort opens a serial port with the specified configuration

Types

type Config

type Config struct {
	Name        string
	Baud        int
	ReadTimeout time.Duration // Total timeout

}

Config contains the information needed to open a serial port.

Currently few options are implemented, but more may be added in the future (patches welcome), so it is recommended that you create a new config addressing the fields by name rather than by order.

For example:

c0 := &serial.Config{Name: "COM45", Baud: 115200, ReadTimeout: time.Millisecond * 500}

or

c1 := new(serial.Config)
c1.Name = "/dev/tty.usbserial"
c1.Baud = 115200
c1.ReadTimeout = time.Millisecond * 500