This section is empty.


This section is empty.


This section is empty.


type Accumulation

type Accumulation struct {
	// contains filtered or unexported fields

    Accumulation contains the exported data for a single metric instrument and label set, as prepared by an Accumulator for the Processor.

    func NewAccumulation

    func NewAccumulation(descriptor *metric.Descriptor, labels *attribute.Set, resource *resource.Resource, aggregator Aggregator) Accumulation

      NewAccumulation allows Accumulator implementations to construct new Accumulations to send to Processors. The Descriptor, Labels, Resource, and Aggregator represent aggregate metric events received over a single collection period.

      func (Accumulation) Aggregator

      func (r Accumulation) Aggregator() Aggregator

        Aggregator returns the checkpointed aggregator. It is safe to access the checkpointed state without locking.

        type Aggregator

        type Aggregator interface {
        	// Aggregation returns an Aggregation interface to access the
        	// current state of this Aggregator.  The caller is
        	// responsible for synchronization and must not call any the
        	// other methods in this interface concurrently while using
        	// the Aggregation.
        	Aggregation() aggregation.Aggregation
        	// Update receives a new measured value and incorporates it
        	// into the aggregation.  Update() calls may be called
        	// concurrently.
        	// Descriptor.NumberKind() should be consulted to determine
        	// whether the provided number is an int64 or float64.
        	// The Context argument comes from user-level code and could be
        	// inspected for a `correlation.Map` or `trace.SpanContext`.
        	Update(ctx context.Context, number number.Number, descriptor *metric.Descriptor) error
        	// SynchronizedMove is called during collection to finish one
        	// period of aggregation by atomically saving the
        	// currently-updating state into the argument Aggregator AND
        	// resetting the current value to the zero state.
        	// SynchronizedMove() is called concurrently with Update().  These
        	// two methods must be synchronized with respect to each
        	// other, for correctness.
        	// After saving a synchronized copy, the Aggregator can be converted
        	// into one or more of the interfaces in the `aggregation` sub-package,
        	// according to kind of Aggregator that was selected.
        	// This method will return an InconsistentAggregatorError if
        	// this Aggregator cannot be copied into the destination due
        	// to an incompatible type.
        	// This call has no Context argument because it is expected to
        	// perform only computation.
        	// When called with a nil `destination`, this Aggregator is reset
        	// and the current value is discarded.
        	SynchronizedMove(destination Aggregator, descriptor *metric.Descriptor) error
        	// Merge combines the checkpointed state from the argument
        	// Aggregator into this Aggregator.  Merge is not synchronized
        	// with respect to Update or SynchronizedMove.
        	// The owner of an Aggregator being merged is responsible for
        	// synchronization of both Aggregator states.
        	Merge(aggregator Aggregator, descriptor *metric.Descriptor) error

          Aggregator implements a specific aggregation behavior, e.g., a behavior to track a sequence of updates to an instrument. Sum-only instruments commonly use a simple Sum aggregator, but for the distribution instruments (ValueRecorder, ValueObserver) there are a number of possible aggregators with different cost and accuracy tradeoffs.

          Note that any Aggregator may be attached to any instrument--this is the result of the OpenTelemetry API/SDK separation. It is possible to attach a Sum aggregator to a ValueRecorder instrument or a MinMaxSumCount aggregator to a Counter instrument.

          type AggregatorSelector

          type AggregatorSelector interface {
          	// AggregatorFor allocates a variable number of aggregators of
          	// a kind suitable for the requested export.  This method
          	// initializes a `...*Aggregator`, to support making a single
          	// allocation.
          	// When the call returns without initializing the *Aggregator
          	// to a non-nil value, the metric instrument is explicitly
          	// disabled.
          	// This must return a consistent type to avoid confusion in
          	// later stages of the metrics export process, i.e., when
          	// Merging or Checkpointing aggregators for a specific
          	// instrument.
          	// Note: This is context-free because the aggregator should
          	// not relate to the incoming context.  This call should not
          	// block.
          	AggregatorFor(descriptor *metric.Descriptor, aggregator ...*Aggregator)

            AggregatorSelector supports selecting the kind of Aggregator to use at runtime for a specific metric instrument.

            type CheckpointSet

            type CheckpointSet interface {
            	// ForEach iterates over aggregated checkpoints for all
            	// metrics that were updated during the last collection
            	// period. Each aggregated checkpoint returned by the
            	// function parameter may return an error.
            	// The ExportKindSelector argument is used to determine
            	// whether the Record is computed using Delta or Cumulative
            	// aggregation.
            	// ForEach tolerates ErrNoData silently, as this is
            	// expected from the Meter implementation. Any other kind
            	// of error will immediately halt ForEach and return
            	// the error to the caller.
            	ForEach(kindSelector ExportKindSelector, recordFunc func(Record) error) error
            	// Locker supports locking the checkpoint set.  Collection
            	// into the checkpoint set cannot take place (in case of a
            	// stateful processor) while it is locked.
            	// The Processor attached to the Accumulator MUST be called
            	// with the lock held.
            	// RLock acquires a read lock corresponding to this Locker.
            	// RUnlock releases a read lock corresponding to this Locker.

              CheckpointSet allows a controller to access a complete checkpoint of aggregated metrics from the Processor. This is passed to the Exporter which may then use ForEach to iterate over the collection of aggregated metrics.

              type Checkpointer

              type Checkpointer interface {
              	// Processor processes metric data for export.  The Process
              	// method is bracketed by StartCollection and FinishCollection
              	// calls.  The embedded AggregatorSelector can be called at
              	// any time.
              	// CheckpointSet returns the current data set.  This may be
              	// called before and after collection.  The
              	// implementation is required to return the same value
              	// throughout its lifetime, since CheckpointSet exposes a
              	// sync.Locker interface.  The caller is responsible for
              	// locking the CheckpointSet before initiating collection.
              	CheckpointSet() CheckpointSet
              	// StartCollection begins a collection interval.
              	// FinishCollection ends a collection interval.
              	FinishCollection() error

                Checkpointer is the interface used by a Controller to coordinate the Processor with Accumulator(s) and Exporter(s). The StartCollection() and FinishCollection() methods start and finish a collection interval. Controllers call the Accumulator(s) during collection to process Accumulations.

                type ExportKind

                type ExportKind int

                  ExportKind indicates the kind of data exported by an exporter. These bits may be OR-d together when multiple exporters are in use.

                  const (
                  	// CumulativeExportKind indicates that an Exporter expects a
                  	// Cumulative Aggregation.
                  	CumulativeExportKind ExportKind = 1
                  	// DeltaExportKind indicates that an Exporter expects a
                  	// Delta Aggregation.
                  	DeltaExportKind ExportKind = 2

                  func (ExportKind) Includes

                  func (kind ExportKind) Includes(has ExportKind) bool

                    Includes tests whether `kind` includes a specific kind of exporter.

                    func (ExportKind) MemoryRequired

                    func (kind ExportKind) MemoryRequired(mkind metric.InstrumentKind) bool

                      MemoryRequired returns whether an exporter of this kind requires memory to export correctly.

                      func (ExportKind) String

                      func (i ExportKind) String() string

                      type ExportKindSelector

                      type ExportKindSelector interface {
                      	// ExportKindFor should return the correct ExportKind that
                      	// should be used when exporting data for the given metric
                      	// instrument and Aggregator kind.
                      	ExportKindFor(descriptor *metric.Descriptor, aggregatorKind aggregation.Kind) ExportKind

                        ExportKindSelector is a sub-interface of Exporter used to indicate whether the Processor should compute Delta or Cumulative Aggregations.

                        func ConstantExportKindSelector

                        func ConstantExportKindSelector(kind ExportKind) ExportKindSelector

                          ConstantExportKindSelector returns an ExportKindSelector that returns a constant ExportKind, one that is either always cumulative or always delta.

                          func CumulativeExportKindSelector

                          func CumulativeExportKindSelector() ExportKindSelector

                            CumulativeExportKindSelector returns an ExportKindSelector that always returns CumulativeExportKind.

                            func DeltaExportKindSelector

                            func DeltaExportKindSelector() ExportKindSelector

                              DeltaExportKindSelector returns an ExportKindSelector that always returns DeltaExportKind.

                              func StatelessExportKindSelector

                              func StatelessExportKindSelector() ExportKindSelector

                                StatelessExportKindSelector returns an ExportKindSelector that always returns the ExportKind that avoids long-term memory requirements.

                                type Exporter

                                type Exporter interface {
                                	// Export is called immediately after completing a collection
                                	// pass in the SDK.
                                	// The Context comes from the controller that initiated
                                	// collection.
                                	// The CheckpointSet interface refers to the Processor that just
                                	// completed collection.
                                	Export(ctx context.Context, checkpointSet CheckpointSet) error
                                	// ExportKindSelector is an interface used by the Processor
                                	// in deciding whether to compute Delta or Cumulative
                                	// Aggregations when passing Records to this Exporter.

                                  Exporter handles presentation of the checkpoint of aggregate metrics. This is the final stage of a metrics export pipeline, where metric data are formatted for a specific system.

                                  type Metadata

                                  type Metadata struct {
                                  	// contains filtered or unexported fields

                                    Metadata contains the common elements for exported metric data that are shared by the Accumulator->Processor and Processor->Exporter steps.

                                    func (Metadata) Descriptor

                                    func (m Metadata) Descriptor() *metric.Descriptor

                                      Descriptor describes the metric instrument being exported.

                                      func (Metadata) Labels

                                      func (m Metadata) Labels() *attribute.Set

                                        Labels describes the labels associated with the instrument and the aggregated data.

                                        func (Metadata) Resource

                                        func (m Metadata) Resource() *resource.Resource

                                          Resource contains common attributes that apply to this metric event.

                                          type Processor

                                          type Processor interface {
                                          	// AggregatorSelector is responsible for selecting the
                                          	// concrete type of Aggregator used for a metric in the SDK.
                                          	// This may be a static decision based on fields of the
                                          	// Descriptor, or it could use an external configuration
                                          	// source to customize the treatment of each metric
                                          	// instrument.
                                          	// The result from AggregatorSelector.AggregatorFor should be
                                          	// the same type for a given Descriptor or else nil.  The same
                                          	// type should be returned for a given descriptor, because
                                          	// Aggregators only know how to Merge with their own type.  If
                                          	// the result is nil, the metric instrument will be disabled.
                                          	// Note that the SDK only calls AggregatorFor when new records
                                          	// require an Aggregator. This does not provide a way to
                                          	// disable metrics with active records.
                                          	// Process is called by the SDK once per internal record,
                                          	// passing the export Accumulation (a Descriptor, the corresponding
                                          	// Labels, and the checkpointed Aggregator).  This call has no
                                          	// Context argument because it is expected to perform only
                                          	// computation.  An SDK is not expected to call exporters from
                                          	// with Process, use a controller for that (see
                                          	// ./controllers/{pull,push}.
                                          	Process(accum Accumulation) error

                                            Processor is responsible for deciding which kind of aggregation to use (via AggregatorSelector), gathering exported results from the SDK during collection, and deciding over which dimensions to group the exported data.

                                            The SDK supports binding only one of these interfaces, as it has the sole responsibility of determining which Aggregator to use for each record.

                                            The embedded AggregatorSelector interface is called (concurrently) in instrumentation context to select the appropriate Aggregator for an instrument.

                                            The `Process` method is called during collection in a single-threaded context from the SDK, after the aggregator is checkpointed, allowing the processor to build the set of metrics currently being exported.

                                            type Record

                                            type Record struct {
                                            	// contains filtered or unexported fields

                                              Record contains the exported data for a single metric instrument and label set, as prepared by the Processor for the Exporter. This includes the effective start and end time for the aggregation.

                                              func NewRecord

                                              func NewRecord(descriptor *metric.Descriptor, labels *attribute.Set, resource *resource.Resource, aggregation aggregation.Aggregation, start, end time.Time) Record

                                                NewRecord allows Processor implementations to construct export records. The Descriptor, Labels, and Aggregator represent aggregate metric events received over a single collection period.

                                                func (Record) Aggregation

                                                func (r Record) Aggregation() aggregation.Aggregation

                                                  Aggregation returns the aggregation, an interface to the record and its aggregator, dependent on the kind of both the input and exporter.

                                                  func (Record) EndTime

                                                  func (r Record) EndTime() time.Time

                                                    EndTime is the end time of the interval covered by this aggregation.

                                                    func (Record) StartTime

                                                    func (r Record) StartTime() time.Time

                                                      StartTime is the start time of the interval covered by this aggregation.

                                                      type Subtractor

                                                      type Subtractor interface {
                                                      	// Subtract subtracts the `operand` from this Aggregator and
                                                      	// outputs the value in `result`.
                                                      	Subtract(operand, result Aggregator, descriptor *metric.Descriptor) error

                                                        Subtractor is an optional interface implemented by some Aggregators. An Aggregator must support `Subtract()` in order to be configured for a Precomputed-Sum instrument (SumObserver, UpDownSumObserver) using a DeltaExporter.


                                                        Path Synopsis