smtp

package
v0.0.0-...-04f4181 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 20, 2020 License: GPL-3.0 Imports: 23 Imported by: 0

Documentation

Overview

Package smtp implements the Simple Mail Transfer Protocol as defined in RFC 5321.

It also implements the following extensions: 

8BITMIME: RFC 1652
AUTH: RFC 2554
STARTTLS: RFC 3207
ENHANCEDSTATUSCODES: RFC 2034
SMTPUTF8: RFC 6531
REQUIRETLS: RFC 8689
CHUNKING: RFC 3030
BINARYMIME: RFC 3030

LMTP (RFC 2033) is also supported.

Additional extensions may be handled by other packages.

Index

Constants

This section is empty.

Variables

View Source 
var (
	ErrAuthRequired    = errors.New("Please authenticate first")
	ErrAuthUnsupported = errors.New("Authentication not supported")
)
View Source 
var Data_ string

///////////

View Source 
var DomainData string
View Source 
var EnhancedCodeNotSet = EnhancedCode{0, 0, 0}

EnhancedCodeNotSet is a nil value of EnhancedCode field in SMTPError, used to indicate that backend failed to provide enhanced status code. X.0.0 will be used (X is derived from error code).

View Source 
var ErrDataReset = errors.New("smtp: message transmission aborted")

ErrDataReset is returned by Reader pased to Data function if client does not send another BDAT command and instead closes connection or issues RSET command.

View Source 
var ErrDataTooLarge = &SMTPError{
	Code:         552,
	EnhancedCode: EnhancedCode{5, 3, 4},
	Message:      "Maximum message size exceeded",
}
View Source 
var ErrTooLongLine = errors.New("smtp: too longer line in input stream")
View Source 
var MailData string
View Source 
var NoEnhancedCode = EnhancedCode{-1, -1, -1}

NoEnhancedCode is used to indicate that enhanced error code should not be included in response.

Note that RFC 2034 requires an enhanced code to be included in all 2xx, 4xx and 5xx responses. This constant is exported for use by extensions, you should probably use EnhancedCodeNotSet instead.

Functions

func ConvertData 

func ConvertData(r io.Reader) (string, error)

func DomainParse 

func DomainParse(rcpt string) string

func SendMail 

func SendMail(addr string, a sasl.Client, from string, to []string, r io.Reader) error

SendMail connects to the server at addr, switches to TLS if possible, authenticates with the optional mechanism a if possible, and then sends an email from address from, to addresses to, with message r. The addr must include a port, as in "mail.example.com:smtp".

The addresses in the to parameter are the SMTP RCPT addresses.

The r parameter should be an RFC 822-style email with headers first, a blank line, and then the message body. The lines of r should be CRLF terminated. The r headers should usually include fields such as "From", "To", "Subject", and "Cc". Sending "Bcc" messages is accomplished by including an email address in the to parameter but not including it in the r headers.

The SendMail function and the go-smtp package are low-level mechanisms and provide no support for DKIM signing (see go-msgauth), MIME attachments (see the mime/multipart package or the go-message package), or other mail functionality.

Types

type Backend 

type Backend interface {
	// Authenticate a user. Return smtp.ErrAuthUnsupported if you don't want to
	// support this.
	Login(state *ConnectionState, username, password string) (Session, error)

	// Called if the client attempts to send mail without logging in first.
	// Return smtp.ErrAuthRequired if you don't want to support this.
	AnonymousLogin(state *ConnectionState) (Session, error)
}

A SMTP server backend.

type BodyType 

type BodyType string
const (
	Body7Bit       BodyType = "7BIT"
	Body8BitMIME   BodyType = "8BITMIME"
	BodyBinaryMIME BodyType = "BINARYMIME"
)

type Client 

type Client struct {
	// Text is the textproto.Conn used by the Client. It is exported to allow for
	// clients to add extensions.
	Text *textproto.Conn
	// contains filtered or unexported fields
}

A Client represents a client connection to an SMTP server.

func Dial 

func Dial(addr string) (*Client, error)

Dial returns a new Client connected to an SMTP server at addr. The addr must include a port, as in "mail.example.com:smtp".

func DialTLS 

func DialTLS(addr string, tlsConfig *tls.Config) (*Client, error)

DialTLS returns a new Client connected to an SMTP server via TLS at addr. The addr must include a port, as in "mail.example.com:smtps".

func NewClient 

func NewClient(conn net.Conn, host string) (*Client, error)

NewClient returns a new Client using an existing connection and host as a server name to be used when authenticating.

func NewClientLMTP 

func NewClientLMTP(conn net.Conn, host string) (*Client, error)

NewClientLMTP returns a new LMTP Client (as defined in RFC 2033) using an existing connector and host as a server name to be used when authenticating.

func (*Client) Auth 

func (c *Client) Auth(a sasl.Client) error

Auth authenticates a client using the provided authentication mechanism. Only servers that advertise the AUTH extension support this function.

If server returns an error, it will be of type *SMTPError.

func (*Client) Close 

func (c *Client) Close() error

Close closes the connection.

func (*Client) Data 

func (c *Client) Data() (io.WriteCloser, error)

Data issues a DATA command to the server and returns a writer that can be used to write the mail headers and body. The caller should close the writer before calling any more methods on c. A call to Data must be preceded by one or more calls to Rcpt.

If server returns an error, it will be of type *SMTPError.

func (*Client) Extension 

func (c *Client) Extension(ext string) (bool, string)

Extension reports whether an extension is support by the server. The extension name is case-insensitive. If the extension is supported, Extension also returns a string that contains any parameters the server specifies for the extension.

func (*Client) Hello 

func (c *Client) Hello(localName string) error

Hello sends a HELO or EHLO to the server as the given host name. Calling this method is only necessary if the client needs control over the host name used. The client will introduce itself as "localhost" automatically otherwise. If Hello is called, it must be called before any of the other methods.

If server returns an error, it will be of type *SMTPError.

func (*Client) LMTPData 

func (c *Client) LMTPData(statusCb func(rcpt string, status *SMTPError)) (io.WriteCloser, error)

LMTPData is the LMTP-specific version of the Data method. It accepts a callback that will be called for each status response received from the server.

Status callback will receive a SMTPError argument for each negative server reply and nil for each positive reply. I/O errors will not be reported using callback and instead will be returned by the Close method of io.WriteCloser. Callback will be called for each successfull Rcpt call done before in the same order.

func (*Client) Mail 

func (c *Client) Mail(from string, opts *MailOptions) error

Mail issues a MAIL command to the server using the provided email address. If the server supports the 8BITMIME extension, Mail adds the BODY=8BITMIME parameter. This initiates a mail transaction and is followed by one or more Rcpt calls.

If opts is not nil, MAIL arguments provided in the structure will be added to the command. Handling of unsupported options depends on the extension.

If server returns an error, it will be of type *SMTPError.

func (*Client) Noop 

func (c *Client) Noop() error

Noop sends the NOOP command to the server. It does nothing but check that the connection to the server is okay.

func (*Client) Quit 

func (c *Client) Quit() error

Quit sends the QUIT command and closes the connection to the server.

If Quit fails the connection is not closed, Close should be used in this case.

func (*Client) Rcpt 

func (c *Client) Rcpt(to string) error

Rcpt issues a RCPT command to the server using the provided email address. A call to Rcpt must be preceded by a call to Mail and may be followed by a Data call or another Rcpt call.

If server returns an error, it will be of type *SMTPError.

func (*Client) Reset 

func (c *Client) Reset() error

Reset sends the RSET command to the server, aborting the current mail transaction.

func (*Client) StartTLS 

func (c *Client) StartTLS(config *tls.Config) error

StartTLS sends the STARTTLS command and encrypts all further communication. Only servers that advertise the STARTTLS extension support this function.

If server returns an error, it will be of type *SMTPError.

func (*Client) TLSConnectionState 

func (c *Client) TLSConnectionState() (state tls.ConnectionState, ok bool)

TLSConnectionState returns the client's TLS connection state. The return values are their zero values if StartTLS did not succeed.

func (*Client) Verify 

func (c *Client) Verify(addr string) error

Verify checks the validity of an email address on the server. If Verify returns nil, the address is valid. A non-nil return does not necessarily indicate an invalid address. Many servers will not verify addresses for security reasons.

If server returns an error, it will be of type *SMTPError.

type Conn 

type Conn struct {
	// contains filtered or unexported fields
}

func (*Conn) Close 

func (c *Conn) Close() error

func (*Conn) ReadLine 

func (c *Conn) ReadLine() (string, error)

Reads a line of input

func (*Conn) Reject 

func (c *Conn) Reject()

func (*Conn) Server 

func (c *Conn) Server() *Server

func (*Conn) Session 

func (c *Conn) Session() Session

func (*Conn) SetSession 

func (c *Conn) SetSession(session Session)

Setting the user resets any message being generated

func (*Conn) State 

func (c *Conn) State() ConnectionState

func (*Conn) TLSConnectionState 

func (c *Conn) TLSConnectionState() (state tls.ConnectionState, ok bool)

TLSConnectionState returns the connection's TLS connection state. Zero values are returned if the connection doesn't use TLS.

func (*Conn) WriteResponse 

func (c *Conn) WriteResponse(code int, enhCode EnhancedCode, text ...string)

type ConnectionState 

type ConnectionState struct {
	Hostname   string
	LocalAddr  net.Addr
	RemoteAddr net.Addr
	TLS        tls.ConnectionState
}

type EnhancedCode 

type EnhancedCode [3]int

type LMTPSession 

type LMTPSession interface {
	// LMTPData is the LMTP-specific version of Data method.
	// It can be optionally implemented by the backend to provide
	// per-recipient status information when it is used over LMTP
	// protocol.
	//
	// LMTPData implementation sets status information using passed
	// StatusCollector by calling SetStatus once per each AddRcpt
	// call, even if AddRcpt was called multiple times with
	// the same argument. SetStatus must not be called after
	// LMTPData returns.
	//
	// Return value of LMTPData itself is used as a status for
	// recipients that got no status set before using StatusCollector.
	LMTPData(r io.Reader, status StatusCollector) error
}

type Logger 

type Logger interface {
	Printf(format string, v ...interface{})
	Println(v ...interface{})
}

Logger interface is used by Server to report unexpected internal errors.

type MailOptions 

type MailOptions struct {
	// Value of BODY= argument, 7BIT, 8BITMIME or BINARYMIME.
	Body BodyType

	// Size of the body. Can be 0 if not specified by client.
	Size int

	// TLS is required for the message transmission.
	//
	// The message should be rejected if it can't be transmitted
	// with TLS.
	RequireTLS bool

	// The message envelope or message header contains UTF-8-encoded strings.
	// This flag is set by SMTPUTF8-aware (RFC 6531) client.
	UTF8 bool

	// The authorization identity asserted by the message sender in decoded
	// form with angle brackets stripped.
	//
	// nil value indicates missing AUTH, non-nil empty string indicates
	// AUTH=<>.
	//
	// Defined in RFC 4954.
	Auth *string
}

MailOptions contains custom arguments that were passed as an argument to the MAIL command.

type SMTPError 

type SMTPError struct {
	Code         int
	EnhancedCode EnhancedCode
	Message      string
}

SMTPError specifies the error code, enhanced error code (if any) and message returned by the server.

func (*SMTPError) Error 

func (err *SMTPError) Error() string

func (*SMTPError) Temporary 

func (err *SMTPError) Temporary() bool

type SaslServerFactory 

type SaslServerFactory func(conn *Conn) sasl.Server

A function that creates SASL servers.

type Server 

type Server struct {
	// TCP or Unix address to listen on.
	Addr string
	// The server TLS configuration.
	TLSConfig *tls.Config
	// Enable LMTP mode, as defined in RFC 2033. LMTP mode cannot be used with a
	// TCP listener.
	LMTP              bool
	Db                *sql.DB
	Domain            string
	MaxRecipients     int
	MaxMessageBytes   int
	MaxLineLength     int
	AllowInsecureAuth bool
	Strict            bool
	Debug             io.Writer
	ErrorLog          Logger
	ReadTimeout       time.Duration
	WriteTimeout      time.Duration

	// Advertise SMTPUTF8 (RFC 6531) capability.
	// Should be used only if backend supports it.
	EnableSMTPUTF8 bool

	// Advertise REQUIRETLS (RFC 8689) capability.
	// Should be used only if backend supports it.
	EnableREQUIRETLS bool

	// Advertise BINARYMIME (RFC 3030) capability.
	// Should be used only if backend supports it.
	EnableBINARYMIME bool

	// If set, the AUTH command will not be advertised and authentication
	// attempts will be rejected. This setting overrides AllowInsecureAuth.
	AuthDisabled bool

	// The server backend.
	Backend Backend
	// contains filtered or unexported fields
}

A SMTP server.

func NewServer 

func NewServer(be Backend) *Server

New creates a new SMTP server.

func (*Server) Close 

func (s *Server) Close() error

Close immediately closes all active listeners and connections.

Close returns any error returned from closing the server's underlying listener(s).

func (*Server) EnableAuth 

func (s *Server) EnableAuth(name string, f SaslServerFactory)

EnableAuth enables an authentication mechanism on this server.

This function should not be called directly, it must only be used by libraries implementing extensions of the SMTP protocol.

func (*Server) ForEachConn 

func (s *Server) ForEachConn(f func(*Conn))

ForEachConn iterates through all opened connections.

func (*Server) ListenAndServe 

func (s *Server) ListenAndServe() (error, string)

ListenAndServe listens on the network address s.Addr and then calls Serve to handle requests on incoming connections.

If s.Addr is blank and LMTP is disabled, ":smtp" is used.

func (*Server) ListenAndServeTLS 

func (s *Server) ListenAndServeTLS() (error, string)

ListenAndServeTLS listens on the TCP network address s.Addr and then calls Serve to handle requests on incoming TLS connections.

If s.Addr is blank, ":smtps" is used.

func (*Server) Serve 

func (s *Server) Serve(l net.Listener) (error, string)

Serve accepts incoming connections on the Listener l.

type Session 

type Session interface {
	// Discard currently processed message.
	Reset()

	// Free all resources associated with session.
	Logout() error

	// Set return path for currently processed message.
	Mail(from string, opts MailOptions) error
	// Add recipient for currently processed message.
	Rcpt(to string) error
	// Set currently processed message contents and send it.
	Data(r io.Reader) error
}

type StatusCollector 

type StatusCollector interface {
	SetStatus(rcptTo string, err error)
}

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.