e2e

package
v0.0.2 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Nov 26, 2021 License: Apache-2.0 Imports: 16 Imported by: 0

Documentation

Overview

nolint: gosec

Index

Constants

View Source
const (
	ModeValidator Mode = "validator"
	ModeFull      Mode = "full"
	ModeLight     Mode = "light"
	ModeSeed      Mode = "seed"

	ProtocolBuiltin Protocol = "builtin"
	ProtocolFile    Protocol = "file"
	ProtocolGRPC    Protocol = "grpc"
	ProtocolTCP     Protocol = "tcp"
	ProtocolUNIX    Protocol = "unix"

	PerturbationDisconnect Perturbation = "disconnect"
	PerturbationKill       Perturbation = "kill"
	PerturbationPause      Perturbation = "pause"
	PerturbationRestart    Perturbation = "restart"
)

Variables

This section is empty.

Functions

This section is empty.

Types

type Manifest

type Manifest struct {
	// IPv6 uses IPv6 networking instead of IPv4. Defaults to IPv4.
	IPv6 bool `toml:"ipv6"`

	// InitialHeight specifies the initial block height, set in genesis. Defaults to 1.
	InitialHeight int64 `toml:"initial_height"`

	// InitialState is an initial set of key/value pairs for the application,
	// set in genesis. Defaults to nothing.
	InitialState map[string]string `toml:"initial_state"`

	// Validators is the initial validator set in genesis, given as node names
	// and power:
	//
	// validators = { validator01 = 10; validator02 = 20; validator03 = 30 }
	//
	// Defaults to all nodes that have mode=validator at power 100. Explicitly
	// specifying an empty set will start with no validators in genesis, and
	// the application must return the validator set in InitChain via the
	// setting validator_update.0 (see below).
	Validators *map[string]int64 `toml:"validators"`

	// ValidatorUpdates is a map of heights to validator names and their power,
	// and will be returned by the ABCI application. For example, the following
	// changes the power of validator01 and validator02 at height 1000:
	//
	// [validator_update.1000]
	// validator01 = 20
	// validator02 = 10
	//
	// Specifying height 0 returns the validator update during InitChain. The
	// application returns the validator updates as-is, i.e. removing a
	// validator must be done by returning it with power 0, and any validators
	// not specified are not changed.
	ValidatorUpdates map[string]map[string]int64 `toml:"validator_update"`

	// Nodes specifies the network nodes. At least one node must be given.
	Nodes map[string]*ManifestNode `toml:"node"`

	// KeyType sets the curve that will be used by validators.
	// Options are ed25519 & secp256k1
	KeyType string `toml:"key_type"`

	// ABCIProtocol specifies the protocol used to communicate with the ABCI
	// application: "unix", "tcp", "grpc", or "builtin". Defaults to builtin.
	// builtin will build a complete Tendermint node into the application and
	// launch it instead of launching a separate Tendermint process.
	ABCIProtocol string `toml:"abci_protocol"`
}

Manifest represents a TOML testnet manifest.

func LoadManifest

func LoadManifest(file string) (Manifest, error)

LoadManifest loads a testnet manifest from a file.

func (Manifest) Save

func (m Manifest) Save(file string) error

Save saves the testnet manifest to a file.

type ManifestNode

type ManifestNode struct {
	// Mode specifies the type of node: "validator", "full", "light" or "seed".
	// Defaults to "validator". Full nodes do not get a signing key (a dummy key
	// is generated), and seed nodes run in seed mode with the PEX reactor enabled.
	Mode string `toml:"mode"`

	// Seeds is the list of node names to use as P2P seed nodes. Defaults to none.
	Seeds []string `toml:"seeds"`

	// PersistentPeers is a list of node names to maintain persistent P2P
	// connections to. If neither seeds nor persistent peers are specified,
	// this defaults to all other nodes in the network. For light clients,
	// this relates to the providers the light client is connected to.
	PersistentPeers []string `toml:"persistent_peers"`

	// Database specifies the database backend: "goleveldb", "cleveldb",
	// "rocksdb", "boltdb", or "badgerdb". Defaults to goleveldb.
	Database string `toml:"database"`

	// PrivvalProtocol specifies the protocol used to sign consensus messages:
	// "file", "unix", or "tcp". Defaults to "file". For unix and tcp, the ABCI
	// application will launch a remote signer client in a separate goroutine.
	// Only nodes with mode=validator will actually make use of this.
	PrivvalProtocol string `toml:"privval_protocol"`

	// StartAt specifies the block height at which the node will be started. The
	// runner will wait for the network to reach at least this block height.
	StartAt int64 `toml:"start_at"`

	// FastSync specifies the fast sync mode: "" (disable), "v0", "v1", or "v2".
	// Defaults to disabled.
	FastSync string `toml:"fast_sync"`

	// StateSync enables state sync. The runner automatically configures trusted
	// block hashes and RPC servers. At least one node in the network must have
	// SnapshotInterval set to non-zero, and the state syncing node must have
	// StartAt set to an appropriate height where a snapshot is available.
	StateSync bool `toml:"state_sync"`

	// PersistInterval specifies the height interval at which the application
	// will persist state to disk. Defaults to 1 (every height), setting this to
	// 0 disables state persistence.
	PersistInterval *uint64 `toml:"persist_interval"`

	// SnapshotInterval specifies the height interval at which the application
	// will take state sync snapshots. Defaults to 0 (disabled).
	SnapshotInterval uint64 `toml:"snapshot_interval"`

	// RetainBlocks specifies the number of recent blocks to retain. Defaults to
	// 0, which retains all blocks. Must be greater that PersistInterval and
	// SnapshotInterval.
	RetainBlocks uint64 `toml:"retain_blocks"`

	// Perturb lists perturbations to apply to the node after it has been
	// started and synced with the network:
	//
	// disconnect: temporarily disconnects the node from the network
	// kill:       kills the node with SIGKILL then restarts it
	// pause:      temporarily pauses (freezes) the node
	// restart:    restarts the node, shutting it down with SIGTERM
	Perturb []string `toml:"perturb"`

	// Misbehaviors sets how a validator behaves during consensus at a
	// certain height. Multiple misbehaviors at different heights can be used
	//
	// An example of misbehaviors
	//    { 10 = "double-prevote", 20 = "double-prevote"}
	//
	// For more information, look at the readme in the maverick folder.
	// A list of all behaviors can be found in ../maverick/consensus/behavior.go
	Misbehaviors map[string]string `toml:"misbehaviors"`
}

ManifestNode represents a node in a testnet manifest.

type Mode

type Mode string

type Node

type Node struct {
	Name             string
	Testnet          *Testnet
	Mode             Mode
	PrivvalKey       crypto.PrivKey
	NodeKey          crypto.PrivKey
	IP               net.IP
	ProxyPort        uint32
	StartAt          int64
	FastSync         string
	StateSync        bool
	Database         string
	ABCIProtocol     Protocol
	PrivvalProtocol  Protocol
	PersistInterval  uint64
	SnapshotInterval uint64
	RetainBlocks     uint64
	Seeds            []*Node
	PersistentPeers  []*Node
	Perturbations    []Perturbation
	Misbehaviors     map[int64]string
}

Node represents a Tendermint node in a testnet.

func (Node) AddressP2P

func (n Node) AddressP2P(withID bool) string

Address returns a P2P endpoint address for the node.

func (Node) AddressRPC

func (n Node) AddressRPC() string

Address returns an RPC endpoint address for the node.

func (Node) Client

func (n Node) Client() (*rpchttp.HTTP, error)

Client returns an RPC client for a node.

func (Node) Stateless

func (n Node) Stateless() bool

Stateless returns true if the node is either a seed node or a light node

func (Node) Validate

func (n Node) Validate(testnet Testnet) error

Validate validates a node.

type Perturbation

type Perturbation string

type Protocol

type Protocol string

type Testnet

type Testnet struct {
	Name             string
	File             string
	Dir              string
	IP               *net.IPNet
	InitialHeight    int64
	InitialState     map[string]string
	Validators       map[*Node]int64
	ValidatorUpdates map[int64]map[*Node]int64
	Nodes            []*Node
	KeyType          string
	ABCIProtocol     string
}

Testnet represents a single testnet.

func LoadTestnet

func LoadTestnet(file string) (*Testnet, error)

LoadTestnet loads a testnet from a manifest file, using the filename to determine the testnet name and directory (from the basename of the file). The testnet generation must be deterministic, since it is generated separately by the runner and the test cases. For this reason, testnets use a random seed to generate e.g. keys.

func (Testnet) ArchiveNodes

func (t Testnet) ArchiveNodes() []*Node

ArchiveNodes returns a list of archive nodes that start at the initial height and contain the entire blockchain history. They are used e.g. as light client RPC servers.

func (Testnet) HasPerturbations

func (t Testnet) HasPerturbations() bool

HasPerturbations returns whether the network has any perturbations.

func (Testnet) IPv6

func (t Testnet) IPv6() bool

IPv6 returns true if the testnet is an IPv6 network.

func (Testnet) LastMisbehaviorHeight

func (t Testnet) LastMisbehaviorHeight() int64

LastMisbehaviorHeight returns the height of the last misbehavior.

func (Testnet) LookupNode

func (t Testnet) LookupNode(name string) *Node

LookupNode looks up a node by name. For now, simply do a linear search.

func (Testnet) RandomNode

func (t Testnet) RandomNode() *Node

RandomNode returns a random non-seed node.

func (Testnet) Validate

func (t Testnet) Validate() error

Validate validates a testnet.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL