livesim2

README

livesim2 - the second generation DASH Live Source Simulator

livesim2 is a new and improved version of the DASH-IF live source simulator.

As the original simulator, the output is a wall-clock (UTC) synchronized infinite linear stream of segments. The synchronization is done modulo asset length, for example: a 1-hour asset restarts every hour on full hours, and a 30s asset restarts every 30s on full and half minutes. If there is a clock in the video, it is therefore easy to directly see how long the system delay is from publishing to screen presentaiton. The very short example assets bundled with the code are only 8s long, which means that they restart every time the UTC time is a multiple of 8s, relative to the EPOCH start 1970-01-01:00:00:00Z.

The new software is written in Go instead of Python and designed to handle content in a more flexible and versatile way.

It is intended to be very easy to install and deploy locally since it is compiled into a single binary that serves the content via a built-in performant HTTP/2 server.

There is also a tool called dashfetcher that can be used to download DASH VoD assets that can serve as sources for the live linear outputs.

The sources are looped so that an infinite "live" stream is available.

Similarly to livesim, the output is highly configurable by adding parameters inside the URLs. These parameters are included not only in the MPD requests, but in all segment requests allowing the server to be stateless, and gives the possibility to generate streams with a huge number of parameter variations. Currently, only a small subset of all parameters of livesim are implemented.

Components

There are two main components, the server livesim2 and the VoD fetcher dashfetcher.

dashfetcher tool

The tool dashfetcher fetches DASH VoD assets via HTTP given an MPD URLs. Currently it supports MPDs with SegmentTimeline with $Time$ and SegmentTemplate with $Number$. The assets must have no explicit <BaseURL> elements to work properly. With the -a/--auto option, the path to the asset is preserved as much as possible and adapted to the local path.

Files already downloaded will not be downloaded again, unless -f/--force is used. As an example, to download a CTA-WAVE asset one can run

dashfetcher --auto https://dash.akamaized.net/WAVE/vectors/cfhd_sets/12.5_25_50/t3/2022-10-17/stream.mpd

which will result in a locally stored DASH VoD asset in the directory

./vod/WAVE/vectors/cfhd_sets/12.5_25_0t3/2022-10-17/

with an MPD called stream.mpd and the segments stored in subdirectories named after their relative URLs. The download URL is added to a file mpdlist.json which is read by livesim2, to provide information about the asset. One can have multiple MPDs in the same asset directory and they may share some representations. That is an easy way to have variants with different representation combinations.

livesim2 server

The server is configured in one or more ways in increasing priority:

1. Default values
2. In a config file
3. Via command-line parameters
4. With environment variables

Two major values to configure are:

• the HTTP port being used (default: 8888)
• the top directory vodroot for searching for VoD assets to be used

Once the server is started, it will scan the file tree starting from vodroot and gather metadata about all DASH VoD assets it finds. Currently, only VoD assets using SegmentTimeline with $Time$ and SegmentTemplate with $Number$ are supported.

Once the server has started, it is possible to find out information about the server and the assets using the HTTP endpoint

• /

that in turn points to:

• /config
• /healthz
• /assets
• /metrics

It is also possible to explore the file tree and play Vod assets by starting at

• /vod/...

Finally, any VoD MPD like /vod/cfhd/stream.mpd is available as a live stream by replacing /vod/ with livesim2as like /livesim2/cfhd/stream.mpd.

MPD Restrictions

The following restrictions apply to the VoD manifest to be used with livesim2

• live-profile (separate segments)
• one Period with all representations of "same" duration
• no BaseURL elements
• no Location elements
• initialization and media attributes in SegmentTemplate on AdaptationSet level

Test parameters

The query string parameter ?nowMS=... can be used in any request to set the wall-clock time livesim2 uses as local time. The time is measured with respect to the 1970 Epoch start, and makes it possible to test time-dependent requests in a deterministic way.

Get Started

Install Go 1.19 or later.

Optionally, create a local vendor directory to keep a local copy of all dependencies.

Then run

> go mod tidy

to fetch and install all dependencies.

To build dashfetcher and livesim2 do

> cd cmd/dashfetcher
> go build .
> cd ../../cmd/livesim2
> go build .

As usual for Go programs, one can also compile and run them directly with go run ..

Bundled test streams with the livesim2 server

A few very short (8s) test assets are bundled with the code. These makes it possible to start the server and get live output by running

> cd cmd/livesim2
> ./livesim2 --vodroot=app/testdata/assets

The log will list the available assets and the port where the server runs.

They can then be streamed via URLs like:

http://localhost:8888/livesim2/WAVE/vectors/cfhd_sets/12.5_25_50/t3/2022-10-17/stream.mpd
http://localhost:8888/livesim2/testpic_2s/Manifest.mpd
http://localhost:8888/livesim2/testpic_8s/Manifest.mpd

The default pattern provides MPDs with SegmentTemplate using $Number$. To stream with SegmentTimeline with $Time$, one should add the parameter /segtimeline_1 between livesim2 and the start of the asset path. Other parameters are added in a similar way.

Adding longer assets somewhere under the vodroot results in longer loops, since the loop start at time modulo duration, and wraps every duration (with default start time = 0).

Running dashfetcher

> cd cmd/livesim2
> ./dashfetcher

will provide a help text that explains how to use it and will also provide an example URL to CTA-WAVE content.

Running tests

The unit tests can be run from the top directory with the usual recursive Go test command

> go test ./...

Deployment

Both dashfetcher and livesim2 can be compiled to single binaries on any Go compiler target platform such as Windows, MacOS, and Linux. Since the result is a single binary it is easy to start it anywhere.

On Linux, livesim2 can be run as a systemd service. More information can be found in the ./deployment directory.

HTTPS and HTTP/2

HTTPS and HTTP/2 are both supported. To enable TLS encryption, the two parameters certpath and keypath must be set to point to an HLS certificaten and a private key file, respectively. It is also recommended to set the port to the default HTTPS port 443.

List of functionality and options

Start the server and access the root URL like http://localhost:8888/ to get a page with information about URL options available.

Sponsoring

This project is in need of sponsoring for further development. See the SPONSORING.md file for more information.

License

See LICENSE.md.