alertmanager-webhook-servicenow

README

alertmanager-webhook-servicenow

A Prometheus AlertManager webhook receiver that manages ServiceNow incidents from alerts, written in Go.

ServiceNow Prerequisites

• A service account with permissions to read and update incidents.
• An available incident table field (minimum of 32 characters) that will be dedicated to hold the webhook alert group ID

Current features

ServiceNow authentication

The supported authentication to ServiceNow is through a service account (basic authentication through HTTPS).

Creation of incident by alert group

One incident is created per distinct group key — as defined by the group_by parameter of Alertmanager's route configuration section. This avoid spamming ServiceNow with incidents when a huge system failure occurs, and still provide a very flexible mechanism to group alerts in one incident. The ServiceNow field used to hold the group key is configurable through the incident_group_key_field property and will contain a hash of the group key.

Incident management workflow

The supported incident workflow is the following:

• Create a new incident if a firing alert group is currently not associated to an existing incident, or if an associated incident exists but is in a state where update is not allowed (this is configurable in the webhook, but would usually be resolved, closed and cancelled states)
• Update an existing incident if it is in a state where update is allowed (same configuration as above in the webhook). Incident fields to be updated is also configurable.
• Allow to re-use fields from the incident to be updated. If a human has changed some field of the incident, you can use .UpdatableIncident.[field] in your string template.

Note that when an incident is updated, configured data fields are updated (e.g.: comments), but incident state is not changed. In the future, an optional auto-resolve feature may be added to move an incident to resolved state when the alert group has a resolved status.

Planned features

• Provide incident template configuration through a separate file
• Support multiple incident configuration templates

Getting Started

Prerequisites

To run this project from sources, you will need a working Go environment.

Installing

go get -u github.com/FXinnovation/alertmanager-webhook-servicenow

Building

Build the sources with

make build

Note: As this is a Go build you can use GOOS and GOARCH environment variables to build for another platform.

Crossbuilding

The Makefile contains a crossbuild target which builds all the platforms defined in .promu.yml file and puts the files in .build folder. Alternatively you can specify one platform to build with the OSARCH environment variable;

OSARCH=linux/amd64 make crossbuild

Run the binary

./alertmanager-webhook-servicenow

By default, the webhook config is expected in config/servicenow.yml (see Configuration).

Use -h flag to list available options.

Testing

This webhook expects a JSON object from Alertmanager. The format of this JSON is described in the Alertmanager documentation or, alternatively, in the Alertmanager GoDoc.

Manual testing

To quickly test if the webhook is working, first start the binary (see Run the binary). You can then simulate the AlertManager request with cURL:

curl -H "Content-type: application/json" -X POST \
  -d '{"receiver": "servicenow-receiver-1", "status": "firing", "externalURL":"http://my.url", "alerts": [{"status": "firing", "labels": {"alertname": "TestAlert"}, "annotations":{"summary": "My alert summary", "description": "My description"} }], "groupLabels": {"alertname": "TestAlert"}, "commonAnnotations": {"description": "My description"} }' \
  http://localhost:9877/webhook

The first time this command is run, it will create an incident in ServiceNow. Any additionnal run of this command (with the same groupLabels) will update the existing incident.

Running unit tests

make test

Configuration

alertmanager-webhook-servicenow config

Configuration is usually done in config/servicenow.yml.

All default_incident properties supports Go templating with the structure defined in AlertManager documentation.

An example can be found in config/servicenow_example.yml. Here is the config detailed description:

service_now:
  # Mandatory. The instance_name part (subdomain) of your ServiceNow URL (i.e: https://instance_name.service-now.com/)
  instance_name: "<instance name>"
  # Mandatory. A user with permissions to read and update ServiceNow incidents.
  user_name: "<user>"
  password: "<password>"
  table_name: "<table_name>"

workflow:
  # Mandatory. Name of an existing ServiceNow incident field that will be used to hold the hashed key that uniquely reference an alert group in the incident management workflow.
  # This field must accept a minimum of 32 characters. A standard approach would be to add a custom field to your incident table (e.g.: u_prometheus_alertgroup_id), and reference it here.
  incident_group_key_field: "<incident table field>"
  # Optional. List of the incident states ID for which existing incident will not be updated. 
  # When the update comes from a firing alert group, it will lead to the creation of a new incident, for resolved alert group, no action will be taken.
  # Usual states configuration would be: resolved, closed and cancelled (e.g. : [6,7,8])
  no_update_states: [6,7,8]
  # Optional. List of incident fields that will be sent to ServiceNow when an existing incident is updated
  # A usual field to set on update would be "comments"
  incident_update_fields: ["comments"]

# All incident fields are optional. The following list is not exhaustive and is provided as an example. Any other existing ServiceNow incident fields are dynamically supported by the webhook, and can be added here
# All incident fields values supports Go templating
default_incident:
  # Sysid or name of the assignment group
  assignment_group: "<assignment group>"
  # Sysid or name of the category
  category: "<category name>"
  # Sysid or name of the CMDB configuration item
  cmdb_ci: "<configuration item>"
  # Text of the comments
  comments: "<comments text>"
  # Name of the company
  company: "<company name>"
  # Contact type of the incident
  contact_type : "<contact type>"
  # Text of the description
  description: "<description text>"
  # Impact: Business loss and potential damage (for example, financial, customer, regulation, security, reputation, brand) caused by the incident
  # Common values: 1 (High), 2 (Medium), 3 (Low)
  impact: "<impact value>"
  # Text of the short_description
  short_description: "<short description text>"
  # Sysid or name of the subcategory
  subcategory: "<sub category>"
  # Urgency: Speed at which the business expects the incident to be resolved
  # Common values: 1 (High), 2 (Medium), 3 (Low)
  urgency: "<urgency value>"

AlertManager config

In the AlertManager config (e.g., alertmanager.yml), a webhook_configs target the webhook URL, e.g.:

global:
  resolve_timeout: 5m

route:
  group_by: ['alertname', 'client']
  group_wait: 10s
  group_interval: 10s
  repeat_interval: 1h
  receiver: 'servicenow-receiver-1'

receivers:
- name: 'servicenow-receiver-1'
  webhook_configs:
  - url: "http://localhost:9877/webhook"
    send_resolved: true

Docker image

You can run images published in dockerhub.

You can also build a docker image using:

make docker

The resulting image is named fxinnovation/alertmanager-webhook-servicenow:{git-branch}.

The image exposes port 9877 and expects the config in /config/servicenow.yml. By default, servicenow_example.yml will be placed at /config/servicenow.yml, but it can be overridden by bind-mounting your own config as shown:

docker run -p 9877:9877 -v /path/on/host/config/servicenow.yml:/config/servicenow.yml fxinnovation/alertmanager-webhook-servicenow:master

The image also accepts environment variables to configure the ServiceNow connection. If they are present, they will take precedence over the corresponding variables in the servicenow.yml config file:

Environment Variable	Corresponding Config Variable
SERVICENOW_INSTANCE_NAME	service_now.instance_name
SERVICENOW_USERNAME	service_now.user_name
SERVICENOW_PASSWORD	service_now.password
SERVICENOW_INCIDENT_GROUP_KEY_FIELD	workflow.incident_group_key_field

Example with environment variables:

docker run -p 9877:9877 -e SERVICENOW_USERNAME="snow_user" -e SERVICENOW_PASSWORD="snow_password" fxinnovation/alertmanager-webhook-servicenow:master

Exposed metrics

The webhook is instrumented to expose internal health metrics on /metrics.

Metric	Description
webhook_requests_total	Total number of HTTP requests on /webhook.
webhook_last_request_time_seconds	Unix/epoch time of the last HTTP request on /webhook.
webhook_incident_validation_errors_total	Total number of incident validation errors.
webhook_incident_template_errors_total	Total number of incident template errors.
servicenow_requests_total	Total number of HTTP requests to ServiceNow instance.
servicenow_last_request_time_seconds	Unix/epoch time of the last HTTP request to ServiceNow instance.
servicenow_errors_total	Total number of ServiceNow errors.

Contributing

Refer to CONTRIBUTING.md.

License

Apache License 2.0, see LICENSE.