support

package
v1.8.28 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 23, 2017 License: Apache-2.0 Imports: 6 Imported by: 0

Documentation

Overview

Package support provides the client and types for making API requests to AWS Support.

The AWS Support API reference is intended for programmers who need detailed information about the AWS Support operations and data types. This service enables you to manage your AWS Support cases programmatically. It uses HTTP methods that return results in JSON format.

The AWS Support service also exposes a set of Trusted Advisor (http://aws.amazon.com/premiumsupport/trustedadvisor/) features. You can retrieve a list of checks and their descriptions, get check results, specify checks to refresh, and get the refresh status of checks.

The following list describes the AWS Support case management operations:

  • Service names, issue categories, and available severity levels. The DescribeServices and DescribeSeverityLevels operations return AWS service names, service codes, service categories, and problem severity levels. You use these values when you call the CreateCase operation.

  • Case creation, case details, and case resolution. The CreateCase, DescribeCases, DescribeAttachment, and ResolveCase operations create AWS Support cases, retrieve information about cases, and resolve cases.

  • Case communication. The DescribeCommunications, AddCommunicationToCase, and AddAttachmentsToSet operations retrieve and add communications and attachments to AWS Support cases.

The following list describes the operations available from the AWS Support service for Trusted Advisor:

  • DescribeTrustedAdvisorChecks returns the list of checks that run against your AWS resources.

  • Using the checkId for a specific check returned by DescribeTrustedAdvisorChecks, you can call DescribeTrustedAdvisorCheckResult to obtain the results for the check you specified.

  • DescribeTrustedAdvisorCheckSummaries returns summarized results for one or more Trusted Advisor checks.

  • RefreshTrustedAdvisorCheck requests that Trusted Advisor rerun a specified check.

  • DescribeTrustedAdvisorCheckRefreshStatuses reports the refresh status of one or more checks.

For authentication of requests, AWS Support uses Signature Version 4 Signing Process (http://docs.aws.amazon.com/general/latest/gr/signature-version-4.html).

See About the AWS Support API (http://docs.aws.amazon.com/awssupport/latest/user/Welcome.html) in the AWS Support User Guide for information about how to use this service to create and manage your support cases, and how to call Trusted Advisor for results of checks on your resources.

See https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15 for more information on this service.

See support package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/support/

Using the Client

To use the client for AWS Support you will first need to create a new instance of it.

When creating a client for an AWS service you'll first need to have a Session already created. The Session provides configuration that can be shared between multiple service clients. Additional configuration can be applied to the Session and service's client when they are constructed. The aws package's Config type contains several fields such as Region for the AWS Region the client should make API requests too. The optional Config value can be provided as the variadic argument for Sessions and client creation.

Once the service's client is created you can use it to make API requests the AWS service. These clients are safe to use concurrently.

// Create a session to share configuration, and load external configuration.
sess := session.Must(session.NewSession())

// Create the service's client with the session.
svc := support.New(sess)

See the SDK's documentation for more information on how to use service clients. https://docs.aws.amazon.com/sdk-for-go/api/

See aws package's Config type for more information on configuration options. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config

See the AWS Support client Support for more information on creating the service's client. https://docs.aws.amazon.com/sdk-for-go/api/service/support/#New

Once the client is created you can make an API request to the service. Each API method takes a input parameter, and returns the service response and an error.

The API method will document which error codes the service can be returned by the operation if the service models the API operation's errors. These errors will also be available as const strings prefixed with "ErrCode".

result, err := svc.AddAttachmentsToSet(params)
if err != nil {
    // Cast err to awserr.Error to handle specific error codes.
    aerr, ok := err.(awserr.Error)
    if ok && aerr.Code() == <error code to check for> {
        // Specific error code handling
    }
    return err
}

fmt.Println("AddAttachmentsToSet result:")
fmt.Println(result)

Using the Client with Context

The service's client also provides methods to make API requests with a Context value. This allows you to control the timeout, and cancellation of pending requests. These methods also take request Option as variadic parameter to apply additional configuration to the API request.

ctx := context.Background()

result, err := svc.AddAttachmentsToSetWithContext(ctx, params)

See the request package documentation for more information on using Context pattern with the SDK. https://docs.aws.amazon.com/sdk-for-go/api/aws/request/

Index

Examples

Constants

View Source
const (

	// ErrCodeAttachmentIdNotFound for service response error code
	// "AttachmentIdNotFound".
	//
	// An attachment with the specified ID could not be found.
	ErrCodeAttachmentIdNotFound = "AttachmentIdNotFound"

	// ErrCodeAttachmentLimitExceeded for service response error code
	// "AttachmentLimitExceeded".
	//
	// The limit for the number of attachment sets created in a short period of
	// time has been exceeded.
	ErrCodeAttachmentLimitExceeded = "AttachmentLimitExceeded"

	// ErrCodeAttachmentSetExpired for service response error code
	// "AttachmentSetExpired".
	//
	// The expiration time of the attachment set has passed. The set expires 1 hour
	// after it is created.
	ErrCodeAttachmentSetExpired = "AttachmentSetExpired"

	// ErrCodeAttachmentSetIdNotFound for service response error code
	// "AttachmentSetIdNotFound".
	//
	// An attachment set with the specified ID could not be found.
	ErrCodeAttachmentSetIdNotFound = "AttachmentSetIdNotFound"

	// ErrCodeAttachmentSetSizeLimitExceeded for service response error code
	// "AttachmentSetSizeLimitExceeded".
	//
	// A limit for the size of an attachment set has been exceeded. The limits are
	// 3 attachments and 5 MB per attachment.
	ErrCodeAttachmentSetSizeLimitExceeded = "AttachmentSetSizeLimitExceeded"

	// ErrCodeCaseCreationLimitExceeded for service response error code
	// "CaseCreationLimitExceeded".
	//
	// The case creation limit for the account has been exceeded.
	ErrCodeCaseCreationLimitExceeded = "CaseCreationLimitExceeded"

	// ErrCodeCaseIdNotFound for service response error code
	// "CaseIdNotFound".
	//
	// The requested caseId could not be located.
	ErrCodeCaseIdNotFound = "CaseIdNotFound"

	// ErrCodeDescribeAttachmentLimitExceeded for service response error code
	// "DescribeAttachmentLimitExceeded".
	//
	// The limit for the number of DescribeAttachment requests in a short period
	// of time has been exceeded.
	ErrCodeDescribeAttachmentLimitExceeded = "DescribeAttachmentLimitExceeded"

	// ErrCodeInternalServerError for service response error code
	// "InternalServerError".
	//
	// An internal server error occurred.
	ErrCodeInternalServerError = "InternalServerError"
)
View Source
const (
	ServiceName = "support"   // Service endpoint prefix API calls made to.
	EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata.
)

Service information constants

Variables

This section is empty.

Functions

This section is empty.

Types

type AddAttachmentsToSetInput

type AddAttachmentsToSetInput struct {

	// The ID of the attachment set. If an attachmentSetId is not specified, a new
	// attachment set is created, and the ID of the set is returned in the response.
	// If an attachmentSetId is specified, the attachments are added to the specified
	// set, if it exists.
	AttachmentSetId *string `locationName:"attachmentSetId" type:"string"`

	// One or more attachments to add to the set. The limit is 3 attachments per
	// set, and the size limit is 5 MB per attachment.
	//
	// Attachments is a required field
	Attachments []*Attachment `locationName:"attachments" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSetRequest

func (AddAttachmentsToSetInput) GoString added in v0.6.5

func (s AddAttachmentsToSetInput) GoString() string

GoString returns the string representation

func (*AddAttachmentsToSetInput) SetAttachmentSetId added in v1.5.0

func (s *AddAttachmentsToSetInput) SetAttachmentSetId(v string) *AddAttachmentsToSetInput

SetAttachmentSetId sets the AttachmentSetId field's value.

func (*AddAttachmentsToSetInput) SetAttachments added in v1.5.0

SetAttachments sets the Attachments field's value.

func (AddAttachmentsToSetInput) String added in v0.6.5

func (s AddAttachmentsToSetInput) String() string

String returns the string representation

func (*AddAttachmentsToSetInput) Validate added in v1.1.21

func (s *AddAttachmentsToSetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AddAttachmentsToSetOutput

type AddAttachmentsToSetOutput struct {

	// The ID of the attachment set. If an attachmentSetId was not specified, a
	// new attachment set is created, and the ID of the set is returned in the response.
	// If an attachmentSetId was specified, the attachments are added to the specified
	// set, if it exists.
	AttachmentSetId *string `locationName:"attachmentSetId" type:"string"`

	// The time and date when the attachment set expires.
	ExpiryTime *string `locationName:"expiryTime" type:"string"`
	// contains filtered or unexported fields
}

The ID and expiry time of the attachment set returned by the AddAttachmentsToSet operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSetResponse

func (AddAttachmentsToSetOutput) GoString added in v0.6.5

func (s AddAttachmentsToSetOutput) GoString() string

GoString returns the string representation

func (*AddAttachmentsToSetOutput) SetAttachmentSetId added in v1.5.0

SetAttachmentSetId sets the AttachmentSetId field's value.

func (*AddAttachmentsToSetOutput) SetExpiryTime added in v1.5.0

SetExpiryTime sets the ExpiryTime field's value.

func (AddAttachmentsToSetOutput) String added in v0.6.5

func (s AddAttachmentsToSetOutput) String() string

String returns the string representation

type AddCommunicationToCaseInput

type AddCommunicationToCaseInput struct {

	// The ID of a set of one or more attachments for the communication to add to
	// the case. Create the set by calling AddAttachmentsToSet
	AttachmentSetId *string `locationName:"attachmentSetId" type:"string"`

	// The AWS Support case ID requested or returned in the call. The case ID is
	// an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
	CaseId *string `locationName:"caseId" type:"string"`

	// The email addresses in the CC line of an email to be added to the support
	// case.
	CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"`

	// The body of an email communication to add to the support case.
	//
	// CommunicationBody is a required field
	CommunicationBody *string `locationName:"communicationBody" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

To be written. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCaseRequest

func (AddCommunicationToCaseInput) GoString added in v0.6.5

func (s AddCommunicationToCaseInput) GoString() string

GoString returns the string representation

func (*AddCommunicationToCaseInput) SetAttachmentSetId added in v1.5.0

SetAttachmentSetId sets the AttachmentSetId field's value.

func (*AddCommunicationToCaseInput) SetCaseId added in v1.5.0

SetCaseId sets the CaseId field's value.

func (*AddCommunicationToCaseInput) SetCcEmailAddresses added in v1.5.0

func (s *AddCommunicationToCaseInput) SetCcEmailAddresses(v []*string) *AddCommunicationToCaseInput

SetCcEmailAddresses sets the CcEmailAddresses field's value.

func (*AddCommunicationToCaseInput) SetCommunicationBody added in v1.5.0

SetCommunicationBody sets the CommunicationBody field's value.

func (AddCommunicationToCaseInput) String added in v0.6.5

String returns the string representation

func (*AddCommunicationToCaseInput) Validate added in v1.1.21

func (s *AddCommunicationToCaseInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AddCommunicationToCaseOutput

type AddCommunicationToCaseOutput struct {

	// True if AddCommunicationToCase succeeds. Otherwise, returns an error.
	Result *bool `locationName:"result" type:"boolean"`
	// contains filtered or unexported fields
}

The result of the AddCommunicationToCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCaseResponse

func (AddCommunicationToCaseOutput) GoString added in v0.6.5

func (s AddCommunicationToCaseOutput) GoString() string

GoString returns the string representation

func (*AddCommunicationToCaseOutput) SetResult added in v1.5.0

SetResult sets the Result field's value.

func (AddCommunicationToCaseOutput) String added in v0.6.5

String returns the string representation

type Attachment

type Attachment struct {

	// The content of the attachment file.
	//
	// Data is automatically base64 encoded/decoded by the SDK.
	Data []byte `locationName:"data" type:"blob"`

	// The name of the attachment file.
	FileName *string `locationName:"fileName" type:"string"`
	// contains filtered or unexported fields
}

An attachment to a case communication. The attachment consists of the file name and the content of the file. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Attachment

func (Attachment) GoString added in v0.6.5

func (s Attachment) GoString() string

GoString returns the string representation

func (*Attachment) SetData added in v1.5.0

func (s *Attachment) SetData(v []byte) *Attachment

SetData sets the Data field's value.

func (*Attachment) SetFileName added in v1.5.0

func (s *Attachment) SetFileName(v string) *Attachment

SetFileName sets the FileName field's value.

func (Attachment) String added in v0.6.5

func (s Attachment) String() string

String returns the string representation

type AttachmentDetails

type AttachmentDetails struct {

	// The ID of the attachment.
	AttachmentId *string `locationName:"attachmentId" type:"string"`

	// The file name of the attachment.
	FileName *string `locationName:"fileName" type:"string"`
	// contains filtered or unexported fields
}

The file name and ID of an attachment to a case communication. You can use the ID to retrieve the attachment with the DescribeAttachment operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AttachmentDetails

func (AttachmentDetails) GoString added in v0.6.5

func (s AttachmentDetails) GoString() string

GoString returns the string representation

func (*AttachmentDetails) SetAttachmentId added in v1.5.0

func (s *AttachmentDetails) SetAttachmentId(v string) *AttachmentDetails

SetAttachmentId sets the AttachmentId field's value.

func (*AttachmentDetails) SetFileName added in v1.5.0

func (s *AttachmentDetails) SetFileName(v string) *AttachmentDetails

SetFileName sets the FileName field's value.

func (AttachmentDetails) String added in v0.6.5

func (s AttachmentDetails) String() string

String returns the string representation

type CaseDetails

type CaseDetails struct {

	// The AWS Support case ID requested or returned in the call. The case ID is
	// an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
	CaseId *string `locationName:"caseId" type:"string"`

	// The category of problem for the AWS Support case.
	CategoryCode *string `locationName:"categoryCode" type:"string"`

	// The email addresses that receive copies of communication about the case.
	CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"`

	// The ID displayed for the case in the AWS Support Center. This is a numeric
	// string.
	DisplayId *string `locationName:"displayId" type:"string"`

	// The ISO 639-1 code for the language in which AWS provides support. AWS Support
	// currently supports English ("en") and Japanese ("ja"). Language parameters
	// must be passed explicitly for operations that take them.
	Language *string `locationName:"language" type:"string"`

	// The five most recent communications between you and AWS Support Center, including
	// the IDs of any attachments to the communications. Also includes a nextToken
	// that you can use to retrieve earlier communications.
	RecentCommunications *RecentCaseCommunications `locationName:"recentCommunications" type:"structure"`

	// The code for the AWS service returned by the call to DescribeServices.
	ServiceCode *string `locationName:"serviceCode" type:"string"`

	// The code for the severity level returned by the call to DescribeSeverityLevels.
	SeverityCode *string `locationName:"severityCode" type:"string"`

	// The status of the case.
	Status *string `locationName:"status" type:"string"`

	// The subject line for the case in the AWS Support Center.
	Subject *string `locationName:"subject" type:"string"`

	// The email address of the account that submitted the case.
	SubmittedBy *string `locationName:"submittedBy" type:"string"`

	// The time that the case was case created in the AWS Support Center.
	TimeCreated *string `locationName:"timeCreated" type:"string"`
	// contains filtered or unexported fields
}

A JSON-formatted object that contains the metadata for a support case. It is contained the response from a DescribeCases request. CaseDetails contains the following fields:

  • caseId. The AWS Support case ID requested or returned in the call. The case ID is an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47.

  • categoryCode. The category of problem for the AWS Support case. Corresponds to the CategoryCode values returned by a call to DescribeServices.

  • displayId. The identifier for the case on pages in the AWS Support Center.

  • language. The ISO 639-1 code for the language in which AWS provides support. AWS Support currently supports English ("en") and Japanese ("ja"). Language parameters must be passed explicitly for operations that take them.

  • recentCommunications. One or more Communication objects. Fields of these objects are attachments, body, caseId, submittedBy, and timeCreated.

  • nextToken. A resumption point for pagination.

  • serviceCode. The identifier for the AWS service that corresponds to the service code defined in the call to DescribeServices.

  • severityCode. The severity code assigned to the case. Contains one of the values returned by the call to DescribeSeverityLevels.

  • status. The status of the case in the AWS Support Center.

  • subject. The subject line of the case.

  • submittedBy. The email address of the account that submitted the case.

  • timeCreated. The time the case was created, in ISO-8601 format.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CaseDetails

func (CaseDetails) GoString added in v0.6.5

func (s CaseDetails) GoString() string

GoString returns the string representation

func (*CaseDetails) SetCaseId added in v1.5.0

func (s *CaseDetails) SetCaseId(v string) *CaseDetails

SetCaseId sets the CaseId field's value.

func (*CaseDetails) SetCategoryCode added in v1.5.0

func (s *CaseDetails) SetCategoryCode(v string) *CaseDetails

SetCategoryCode sets the CategoryCode field's value.

func (*CaseDetails) SetCcEmailAddresses added in v1.5.0

func (s *CaseDetails) SetCcEmailAddresses(v []*string) *CaseDetails

SetCcEmailAddresses sets the CcEmailAddresses field's value.

func (*CaseDetails) SetDisplayId added in v1.5.0

func (s *CaseDetails) SetDisplayId(v string) *CaseDetails

SetDisplayId sets the DisplayId field's value.

func (*CaseDetails) SetLanguage added in v1.5.0

func (s *CaseDetails) SetLanguage(v string) *CaseDetails

SetLanguage sets the Language field's value.

func (*CaseDetails) SetRecentCommunications added in v1.5.0

func (s *CaseDetails) SetRecentCommunications(v *RecentCaseCommunications) *CaseDetails

SetRecentCommunications sets the RecentCommunications field's value.

func (*CaseDetails) SetServiceCode added in v1.5.0

func (s *CaseDetails) SetServiceCode(v string) *CaseDetails

SetServiceCode sets the ServiceCode field's value.

func (*CaseDetails) SetSeverityCode added in v1.5.0

func (s *CaseDetails) SetSeverityCode(v string) *CaseDetails

SetSeverityCode sets the SeverityCode field's value.

func (*CaseDetails) SetStatus added in v1.5.0

func (s *CaseDetails) SetStatus(v string) *CaseDetails

SetStatus sets the Status field's value.

func (*CaseDetails) SetSubject added in v1.5.0

func (s *CaseDetails) SetSubject(v string) *CaseDetails

SetSubject sets the Subject field's value.

func (*CaseDetails) SetSubmittedBy added in v1.5.0

func (s *CaseDetails) SetSubmittedBy(v string) *CaseDetails

SetSubmittedBy sets the SubmittedBy field's value.

func (*CaseDetails) SetTimeCreated added in v1.5.0

func (s *CaseDetails) SetTimeCreated(v string) *CaseDetails

SetTimeCreated sets the TimeCreated field's value.

func (CaseDetails) String added in v0.6.5

func (s CaseDetails) String() string

String returns the string representation

type Category

type Category struct {

	// The category code for the support case.
	Code *string `locationName:"code" type:"string"`

	// The category name for the support case.
	Name *string `locationName:"name" type:"string"`
	// contains filtered or unexported fields
}

A JSON-formatted name/value pair that represents the category name and category code of the problem, selected from the DescribeServices response for each AWS service. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Category

func (Category) GoString added in v0.6.5

func (s Category) GoString() string

GoString returns the string representation

func (*Category) SetCode added in v1.5.0

func (s *Category) SetCode(v string) *Category

SetCode sets the Code field's value.

func (*Category) SetName added in v1.5.0

func (s *Category) SetName(v string) *Category

SetName sets the Name field's value.

func (Category) String added in v0.6.5

func (s Category) String() string

String returns the string representation

type Communication

type Communication struct {

	// Information about the attachments to the case communication.
	AttachmentSet []*AttachmentDetails `locationName:"attachmentSet" type:"list"`

	// The text of the communication between the customer and AWS Support.
	Body *string `locationName:"body" min:"1" type:"string"`

	// The AWS Support case ID requested or returned in the call. The case ID is
	// an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
	CaseId *string `locationName:"caseId" type:"string"`

	// The email address of the account that submitted the AWS Support case.
	SubmittedBy *string `locationName:"submittedBy" type:"string"`

	// The time the communication was created.
	TimeCreated *string `locationName:"timeCreated" type:"string"`
	// contains filtered or unexported fields
}

A communication associated with an AWS Support case. The communication consists of the case ID, the message body, attachment information, the account email address, and the date and time of the communication. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Communication

func (Communication) GoString added in v0.6.5

func (s Communication) GoString() string

GoString returns the string representation

func (*Communication) SetAttachmentSet added in v1.5.0

func (s *Communication) SetAttachmentSet(v []*AttachmentDetails) *Communication

SetAttachmentSet sets the AttachmentSet field's value.

func (*Communication) SetBody added in v1.5.0

func (s *Communication) SetBody(v string) *Communication

SetBody sets the Body field's value.

func (*Communication) SetCaseId added in v1.5.0

func (s *Communication) SetCaseId(v string) *Communication

SetCaseId sets the CaseId field's value.

func (*Communication) SetSubmittedBy added in v1.5.0

func (s *Communication) SetSubmittedBy(v string) *Communication

SetSubmittedBy sets the SubmittedBy field's value.

func (*Communication) SetTimeCreated added in v1.5.0

func (s *Communication) SetTimeCreated(v string) *Communication

SetTimeCreated sets the TimeCreated field's value.

func (Communication) String added in v0.6.5

func (s Communication) String() string

String returns the string representation

type CreateCaseInput

type CreateCaseInput struct {

	// The ID of a set of one or more attachments for the case. Create the set by
	// using AddAttachmentsToSet.
	AttachmentSetId *string `locationName:"attachmentSetId" type:"string"`

	// The category of problem for the AWS Support case.
	CategoryCode *string `locationName:"categoryCode" type:"string"`

	// A list of email addresses that AWS Support copies on case correspondence.
	CcEmailAddresses []*string `locationName:"ccEmailAddresses" type:"list"`

	// The communication body text when you create an AWS Support case by calling
	// CreateCase.
	//
	// CommunicationBody is a required field
	CommunicationBody *string `locationName:"communicationBody" min:"1" type:"string" required:"true"`

	// The type of issue for the case. You can specify either "customer-service"
	// or "technical." If you do not indicate a value, the default is "technical."
	IssueType *string `locationName:"issueType" type:"string"`

	// The ISO 639-1 code for the language in which AWS provides support. AWS Support
	// currently supports English ("en") and Japanese ("ja"). Language parameters
	// must be passed explicitly for operations that take them.
	Language *string `locationName:"language" type:"string"`

	// The code for the AWS service returned by the call to DescribeServices.
	ServiceCode *string `locationName:"serviceCode" type:"string"`

	// The code for the severity level returned by the call to DescribeSeverityLevels.
	//
	// The availability of severity levels depends on each customer's support subscription.
	// In other words, your subscription may not necessarily require the urgent
	// level of response time.
	SeverityCode *string `locationName:"severityCode" type:"string"`

	// The title of the AWS Support case.
	//
	// Subject is a required field
	Subject *string `locationName:"subject" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCaseRequest

func (CreateCaseInput) GoString added in v0.6.5

func (s CreateCaseInput) GoString() string

GoString returns the string representation

func (*CreateCaseInput) SetAttachmentSetId added in v1.5.0

func (s *CreateCaseInput) SetAttachmentSetId(v string) *CreateCaseInput

SetAttachmentSetId sets the AttachmentSetId field's value.

func (*CreateCaseInput) SetCategoryCode added in v1.5.0

func (s *CreateCaseInput) SetCategoryCode(v string) *CreateCaseInput

SetCategoryCode sets the CategoryCode field's value.

func (*CreateCaseInput) SetCcEmailAddresses added in v1.5.0

func (s *CreateCaseInput) SetCcEmailAddresses(v []*string) *CreateCaseInput

SetCcEmailAddresses sets the CcEmailAddresses field's value.

func (*CreateCaseInput) SetCommunicationBody added in v1.5.0

func (s *CreateCaseInput) SetCommunicationBody(v string) *CreateCaseInput

SetCommunicationBody sets the CommunicationBody field's value.

func (*CreateCaseInput) SetIssueType added in v1.5.0

func (s *CreateCaseInput) SetIssueType(v string) *CreateCaseInput

SetIssueType sets the IssueType field's value.

func (*CreateCaseInput) SetLanguage added in v1.5.0

func (s *CreateCaseInput) SetLanguage(v string) *CreateCaseInput

SetLanguage sets the Language field's value.

func (*CreateCaseInput) SetServiceCode added in v1.5.0

func (s *CreateCaseInput) SetServiceCode(v string) *CreateCaseInput

SetServiceCode sets the ServiceCode field's value.

func (*CreateCaseInput) SetSeverityCode added in v1.5.0

func (s *CreateCaseInput) SetSeverityCode(v string) *CreateCaseInput

SetSeverityCode sets the SeverityCode field's value.

func (*CreateCaseInput) SetSubject added in v1.5.0

func (s *CreateCaseInput) SetSubject(v string) *CreateCaseInput

SetSubject sets the Subject field's value.

func (CreateCaseInput) String added in v0.6.5

func (s CreateCaseInput) String() string

String returns the string representation

func (*CreateCaseInput) Validate added in v1.1.21

func (s *CreateCaseInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateCaseOutput

type CreateCaseOutput struct {

	// The AWS Support case ID requested or returned in the call. The case ID is
	// an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
	CaseId *string `locationName:"caseId" type:"string"`
	// contains filtered or unexported fields
}

The AWS Support case ID returned by a successful completion of the CreateCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCaseResponse

func (CreateCaseOutput) GoString added in v0.6.5

func (s CreateCaseOutput) GoString() string

GoString returns the string representation

func (*CreateCaseOutput) SetCaseId added in v1.5.0

func (s *CreateCaseOutput) SetCaseId(v string) *CreateCaseOutput

SetCaseId sets the CaseId field's value.

func (CreateCaseOutput) String added in v0.6.5

func (s CreateCaseOutput) String() string

String returns the string representation

type DescribeAttachmentInput

type DescribeAttachmentInput struct {

	// The ID of the attachment to return. Attachment IDs are returned by the DescribeCommunications
	// operation.
	//
	// AttachmentId is a required field
	AttachmentId *string `locationName:"attachmentId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachmentRequest

func (DescribeAttachmentInput) GoString added in v0.6.5

func (s DescribeAttachmentInput) GoString() string

GoString returns the string representation

func (*DescribeAttachmentInput) SetAttachmentId added in v1.5.0

SetAttachmentId sets the AttachmentId field's value.

func (DescribeAttachmentInput) String added in v0.6.5

func (s DescribeAttachmentInput) String() string

String returns the string representation

func (*DescribeAttachmentInput) Validate added in v1.1.21

func (s *DescribeAttachmentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeAttachmentOutput

type DescribeAttachmentOutput struct {

	// The attachment content and file name.
	Attachment *Attachment `locationName:"attachment" type:"structure"`
	// contains filtered or unexported fields
}

The content and file name of the attachment returned by the DescribeAttachment operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachmentResponse

func (DescribeAttachmentOutput) GoString added in v0.6.5

func (s DescribeAttachmentOutput) GoString() string

GoString returns the string representation

func (*DescribeAttachmentOutput) SetAttachment added in v1.5.0

SetAttachment sets the Attachment field's value.

func (DescribeAttachmentOutput) String added in v0.6.5

func (s DescribeAttachmentOutput) String() string

String returns the string representation

type DescribeCasesInput

type DescribeCasesInput struct {

	// The start date for a filtered date search on support case communications.
	// Case communications are available for 12 months after creation.
	AfterTime *string `locationName:"afterTime" type:"string"`

	// The end date for a filtered date search on support case communications. Case
	// communications are available for 12 months after creation.
	BeforeTime *string `locationName:"beforeTime" type:"string"`

	// A list of ID numbers of the support cases you want returned. The maximum
	// number of cases is 100.
	CaseIdList []*string `locationName:"caseIdList" type:"list"`

	// The ID displayed for a case in the AWS Support Center user interface.
	DisplayId *string `locationName:"displayId" type:"string"`

	// Specifies whether communications should be included in the DescribeCases
	// results. The default is true.
	IncludeCommunications *bool `locationName:"includeCommunications" type:"boolean"`

	// Specifies whether resolved support cases should be included in the DescribeCases
	// results. The default is false.
	IncludeResolvedCases *bool `locationName:"includeResolvedCases" type:"boolean"`

	// The ISO 639-1 code for the language in which AWS provides support. AWS Support
	// currently supports English ("en") and Japanese ("ja"). Language parameters
	// must be passed explicitly for operations that take them.
	Language *string `locationName:"language" type:"string"`

	// The maximum number of results to return before paginating.
	MaxResults *int64 `locationName:"maxResults" min:"10" type:"integer"`

	// A resumption point for pagination.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCasesRequest

func (DescribeCasesInput) GoString added in v0.6.5

func (s DescribeCasesInput) GoString() string

GoString returns the string representation

func (*DescribeCasesInput) SetAfterTime added in v1.5.0

func (s *DescribeCasesInput) SetAfterTime(v string) *DescribeCasesInput

SetAfterTime sets the AfterTime field's value.

func (*DescribeCasesInput) SetBeforeTime added in v1.5.0

func (s *DescribeCasesInput) SetBeforeTime(v string) *DescribeCasesInput

SetBeforeTime sets the BeforeTime field's value.

func (*DescribeCasesInput) SetCaseIdList added in v1.5.0

func (s *DescribeCasesInput) SetCaseIdList(v []*string) *DescribeCasesInput

SetCaseIdList sets the CaseIdList field's value.

func (*DescribeCasesInput) SetDisplayId added in v1.5.0

func (s *DescribeCasesInput) SetDisplayId(v string) *DescribeCasesInput

SetDisplayId sets the DisplayId field's value.

func (*DescribeCasesInput) SetIncludeCommunications added in v1.5.0

func (s *DescribeCasesInput) SetIncludeCommunications(v bool) *DescribeCasesInput

SetIncludeCommunications sets the IncludeCommunications field's value.

func (*DescribeCasesInput) SetIncludeResolvedCases added in v1.5.0

func (s *DescribeCasesInput) SetIncludeResolvedCases(v bool) *DescribeCasesInput

SetIncludeResolvedCases sets the IncludeResolvedCases field's value.

func (*DescribeCasesInput) SetLanguage added in v1.5.0

func (s *DescribeCasesInput) SetLanguage(v string) *DescribeCasesInput

SetLanguage sets the Language field's value.

func (*DescribeCasesInput) SetMaxResults added in v1.5.0

func (s *DescribeCasesInput) SetMaxResults(v int64) *DescribeCasesInput

SetMaxResults sets the MaxResults field's value.

func (*DescribeCasesInput) SetNextToken added in v1.5.0

func (s *DescribeCasesInput) SetNextToken(v string) *DescribeCasesInput

SetNextToken sets the NextToken field's value.

func (DescribeCasesInput) String added in v0.6.5

func (s DescribeCasesInput) String() string

String returns the string representation

func (*DescribeCasesInput) Validate added in v1.1.21

func (s *DescribeCasesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeCasesOutput

type DescribeCasesOutput struct {

	// The details for the cases that match the request.
	Cases []*CaseDetails `locationName:"cases" type:"list"`

	// A resumption point for pagination.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Returns an array of CaseDetails objects and a nextToken that defines a point for pagination in the result set. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCasesResponse

func (DescribeCasesOutput) GoString added in v0.6.5

func (s DescribeCasesOutput) GoString() string

GoString returns the string representation

func (*DescribeCasesOutput) SetCases added in v1.5.0

SetCases sets the Cases field's value.

func (*DescribeCasesOutput) SetNextToken added in v1.5.0

func (s *DescribeCasesOutput) SetNextToken(v string) *DescribeCasesOutput

SetNextToken sets the NextToken field's value.

func (DescribeCasesOutput) String added in v0.6.5

func (s DescribeCasesOutput) String() string

String returns the string representation

type DescribeCommunicationsInput

type DescribeCommunicationsInput struct {

	// The start date for a filtered date search on support case communications.
	// Case communications are available for 12 months after creation.
	AfterTime *string `locationName:"afterTime" type:"string"`

	// The end date for a filtered date search on support case communications. Case
	// communications are available for 12 months after creation.
	BeforeTime *string `locationName:"beforeTime" type:"string"`

	// The AWS Support case ID requested or returned in the call. The case ID is
	// an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
	//
	// CaseId is a required field
	CaseId *string `locationName:"caseId" type:"string" required:"true"`

	// The maximum number of results to return before paginating.
	MaxResults *int64 `locationName:"maxResults" min:"10" type:"integer"`

	// A resumption point for pagination.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunicationsRequest

func (DescribeCommunicationsInput) GoString added in v0.6.5

func (s DescribeCommunicationsInput) GoString() string

GoString returns the string representation

func (*DescribeCommunicationsInput) SetAfterTime added in v1.5.0

SetAfterTime sets the AfterTime field's value.

func (*DescribeCommunicationsInput) SetBeforeTime added in v1.5.0

SetBeforeTime sets the BeforeTime field's value.

func (*DescribeCommunicationsInput) SetCaseId added in v1.5.0

SetCaseId sets the CaseId field's value.

func (*DescribeCommunicationsInput) SetMaxResults added in v1.5.0

SetMaxResults sets the MaxResults field's value.

func (*DescribeCommunicationsInput) SetNextToken added in v1.5.0

SetNextToken sets the NextToken field's value.

func (DescribeCommunicationsInput) String added in v0.6.5

String returns the string representation

func (*DescribeCommunicationsInput) Validate added in v1.1.21

func (s *DescribeCommunicationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeCommunicationsOutput

type DescribeCommunicationsOutput struct {

	// The communications for the case.
	Communications []*Communication `locationName:"communications" type:"list"`

	// A resumption point for pagination.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

The communications returned by the DescribeCommunications operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunicationsResponse

func (DescribeCommunicationsOutput) GoString added in v0.6.5

func (s DescribeCommunicationsOutput) GoString() string

GoString returns the string representation

func (*DescribeCommunicationsOutput) SetCommunications added in v1.5.0

SetCommunications sets the Communications field's value.

func (*DescribeCommunicationsOutput) SetNextToken added in v1.5.0

SetNextToken sets the NextToken field's value.

func (DescribeCommunicationsOutput) String added in v0.6.5

String returns the string representation

type DescribeServicesInput

type DescribeServicesInput struct {

	// The ISO 639-1 code for the language in which AWS provides support. AWS Support
	// currently supports English ("en") and Japanese ("ja"). Language parameters
	// must be passed explicitly for operations that take them.
	Language *string `locationName:"language" type:"string"`

	// A JSON-formatted list of service codes available for AWS services.
	ServiceCodeList []*string `locationName:"serviceCodeList" type:"list"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServicesRequest

func (DescribeServicesInput) GoString added in v0.6.5

func (s DescribeServicesInput) GoString() string

GoString returns the string representation

func (*DescribeServicesInput) SetLanguage added in v1.5.0

SetLanguage sets the Language field's value.

func (*DescribeServicesInput) SetServiceCodeList added in v1.5.0

func (s *DescribeServicesInput) SetServiceCodeList(v []*string) *DescribeServicesInput

SetServiceCodeList sets the ServiceCodeList field's value.

func (DescribeServicesInput) String added in v0.6.5

func (s DescribeServicesInput) String() string

String returns the string representation

type DescribeServicesOutput

type DescribeServicesOutput struct {

	// A JSON-formatted list of AWS services.
	Services []*Service `locationName:"services" type:"list"`
	// contains filtered or unexported fields
}

The list of AWS services returned by the DescribeServices operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServicesResponse

func (DescribeServicesOutput) GoString added in v0.6.5

func (s DescribeServicesOutput) GoString() string

GoString returns the string representation

func (*DescribeServicesOutput) SetServices added in v1.5.0

SetServices sets the Services field's value.

func (DescribeServicesOutput) String added in v0.6.5

func (s DescribeServicesOutput) String() string

String returns the string representation

type DescribeSeverityLevelsInput

type DescribeSeverityLevelsInput struct {

	// The ISO 639-1 code for the language in which AWS provides support. AWS Support
	// currently supports English ("en") and Japanese ("ja"). Language parameters
	// must be passed explicitly for operations that take them.
	Language *string `locationName:"language" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevelsRequest

func (DescribeSeverityLevelsInput) GoString added in v0.6.5

func (s DescribeSeverityLevelsInput) GoString() string

GoString returns the string representation

func (*DescribeSeverityLevelsInput) SetLanguage added in v1.5.0

SetLanguage sets the Language field's value.

func (DescribeSeverityLevelsInput) String added in v0.6.5

String returns the string representation

type DescribeSeverityLevelsOutput

type DescribeSeverityLevelsOutput struct {

	// The available severity levels for the support case. Available severity levels
	// are defined by your service level agreement with AWS.
	SeverityLevels []*SeverityLevel `locationName:"severityLevels" type:"list"`
	// contains filtered or unexported fields
}

The list of severity levels returned by the DescribeSeverityLevels operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevelsResponse

func (DescribeSeverityLevelsOutput) GoString added in v0.6.5

func (s DescribeSeverityLevelsOutput) GoString() string

GoString returns the string representation

func (*DescribeSeverityLevelsOutput) SetSeverityLevels added in v1.5.0

SetSeverityLevels sets the SeverityLevels field's value.

func (DescribeSeverityLevelsOutput) String added in v0.6.5

String returns the string representation

type DescribeTrustedAdvisorCheckRefreshStatusesInput

type DescribeTrustedAdvisorCheckRefreshStatusesInput struct {

	// The IDs of the Trusted Advisor checks to get the status of. Note: Specifying
	// the check ID of a check that is automatically refreshed causes an InvalidParameterValue
	// error.
	//
	// CheckIds is a required field
	CheckIds []*string `locationName:"checkIds" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatusesRequest

func (DescribeTrustedAdvisorCheckRefreshStatusesInput) GoString added in v0.6.5

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckRefreshStatusesInput) SetCheckIds added in v1.5.0

SetCheckIds sets the CheckIds field's value.

func (DescribeTrustedAdvisorCheckRefreshStatusesInput) String added in v0.6.5

String returns the string representation

func (*DescribeTrustedAdvisorCheckRefreshStatusesInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type DescribeTrustedAdvisorCheckRefreshStatusesOutput

type DescribeTrustedAdvisorCheckRefreshStatusesOutput struct {

	// The refresh status of the specified Trusted Advisor checks.
	//
	// Statuses is a required field
	Statuses []*TrustedAdvisorCheckRefreshStatus `locationName:"statuses" type:"list" required:"true"`
	// contains filtered or unexported fields
}

The statuses of the Trusted Advisor checks returned by the DescribeTrustedAdvisorCheckRefreshStatuses operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatusesResponse

func (DescribeTrustedAdvisorCheckRefreshStatusesOutput) GoString added in v0.6.5

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckRefreshStatusesOutput) SetStatuses added in v1.5.0

SetStatuses sets the Statuses field's value.

func (DescribeTrustedAdvisorCheckRefreshStatusesOutput) String added in v0.6.5

String returns the string representation

type DescribeTrustedAdvisorCheckResultInput

type DescribeTrustedAdvisorCheckResultInput struct {

	// The unique identifier for the Trusted Advisor check.
	//
	// CheckId is a required field
	CheckId *string `locationName:"checkId" type:"string" required:"true"`

	// The ISO 639-1 code for the language in which AWS provides support. AWS Support
	// currently supports English ("en") and Japanese ("ja"). Language parameters
	// must be passed explicitly for operations that take them.
	Language *string `locationName:"language" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResultRequest

func (DescribeTrustedAdvisorCheckResultInput) GoString added in v0.6.5

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckResultInput) SetCheckId added in v1.5.0

SetCheckId sets the CheckId field's value.

func (*DescribeTrustedAdvisorCheckResultInput) SetLanguage added in v1.5.0

SetLanguage sets the Language field's value.

func (DescribeTrustedAdvisorCheckResultInput) String added in v0.6.5

String returns the string representation

func (*DescribeTrustedAdvisorCheckResultInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type DescribeTrustedAdvisorCheckResultOutput

type DescribeTrustedAdvisorCheckResultOutput struct {

	// The detailed results of the Trusted Advisor check.
	Result *TrustedAdvisorCheckResult `locationName:"result" type:"structure"`
	// contains filtered or unexported fields
}

The result of the Trusted Advisor check returned by the DescribeTrustedAdvisorCheckResult operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResultResponse

func (DescribeTrustedAdvisorCheckResultOutput) GoString added in v0.6.5

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckResultOutput) SetResult added in v1.5.0

SetResult sets the Result field's value.

func (DescribeTrustedAdvisorCheckResultOutput) String added in v0.6.5

String returns the string representation

type DescribeTrustedAdvisorCheckSummariesInput

type DescribeTrustedAdvisorCheckSummariesInput struct {

	// The IDs of the Trusted Advisor checks.
	//
	// CheckIds is a required field
	CheckIds []*string `locationName:"checkIds" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummariesRequest

func (DescribeTrustedAdvisorCheckSummariesInput) GoString added in v0.6.5

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckSummariesInput) SetCheckIds added in v1.5.0

SetCheckIds sets the CheckIds field's value.

func (DescribeTrustedAdvisorCheckSummariesInput) String added in v0.6.5

String returns the string representation

func (*DescribeTrustedAdvisorCheckSummariesInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type DescribeTrustedAdvisorCheckSummariesOutput

type DescribeTrustedAdvisorCheckSummariesOutput struct {

	// The summary information for the requested Trusted Advisor checks.
	//
	// Summaries is a required field
	Summaries []*TrustedAdvisorCheckSummary `locationName:"summaries" type:"list" required:"true"`
	// contains filtered or unexported fields
}

The summaries of the Trusted Advisor checks returned by the DescribeTrustedAdvisorCheckSummaries operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummariesResponse

func (DescribeTrustedAdvisorCheckSummariesOutput) GoString added in v0.6.5

GoString returns the string representation

func (*DescribeTrustedAdvisorCheckSummariesOutput) SetSummaries added in v1.5.0

SetSummaries sets the Summaries field's value.

func (DescribeTrustedAdvisorCheckSummariesOutput) String added in v0.6.5

String returns the string representation

type DescribeTrustedAdvisorChecksInput

type DescribeTrustedAdvisorChecksInput struct {

	// The ISO 639-1 code for the language in which AWS provides support. AWS Support
	// currently supports English ("en") and Japanese ("ja"). Language parameters
	// must be passed explicitly for operations that take them.
	//
	// Language is a required field
	Language *string `locationName:"language" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecksRequest

func (DescribeTrustedAdvisorChecksInput) GoString added in v0.6.5

GoString returns the string representation

func (*DescribeTrustedAdvisorChecksInput) SetLanguage added in v1.5.0

SetLanguage sets the Language field's value.

func (DescribeTrustedAdvisorChecksInput) String added in v0.6.5

String returns the string representation

func (*DescribeTrustedAdvisorChecksInput) Validate added in v1.1.21

Validate inspects the fields of the type to determine if they are valid.

type DescribeTrustedAdvisorChecksOutput

type DescribeTrustedAdvisorChecksOutput struct {

	// Information about all available Trusted Advisor checks.
	//
	// Checks is a required field
	Checks []*TrustedAdvisorCheckDescription `locationName:"checks" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Information about the Trusted Advisor checks returned by the DescribeTrustedAdvisorChecks operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecksResponse

func (DescribeTrustedAdvisorChecksOutput) GoString added in v0.6.5

GoString returns the string representation

func (*DescribeTrustedAdvisorChecksOutput) SetChecks added in v1.5.0

SetChecks sets the Checks field's value.

func (DescribeTrustedAdvisorChecksOutput) String added in v0.6.5

String returns the string representation

type RecentCaseCommunications

type RecentCaseCommunications struct {

	// The five most recent communications associated with the case.
	Communications []*Communication `locationName:"communications" type:"list"`

	// A resumption point for pagination.
	NextToken *string `locationName:"nextToken" type:"string"`
	// contains filtered or unexported fields
}

The five most recent communications associated with the case. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RecentCaseCommunications

func (RecentCaseCommunications) GoString added in v0.6.5

func (s RecentCaseCommunications) GoString() string

GoString returns the string representation

func (*RecentCaseCommunications) SetCommunications added in v1.5.0

SetCommunications sets the Communications field's value.

func (*RecentCaseCommunications) SetNextToken added in v1.5.0

SetNextToken sets the NextToken field's value.

func (RecentCaseCommunications) String added in v0.6.5

func (s RecentCaseCommunications) String() string

String returns the string representation

type RefreshTrustedAdvisorCheckInput

type RefreshTrustedAdvisorCheckInput struct {

	// The unique identifier for the Trusted Advisor check to refresh. Note: Specifying
	// the check ID of a check that is automatically refreshed causes an InvalidParameterValue
	// error.
	//
	// CheckId is a required field
	CheckId *string `locationName:"checkId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheckRequest

func (RefreshTrustedAdvisorCheckInput) GoString added in v0.6.5

GoString returns the string representation

func (*RefreshTrustedAdvisorCheckInput) SetCheckId added in v1.5.0

SetCheckId sets the CheckId field's value.

func (RefreshTrustedAdvisorCheckInput) String added in v0.6.5

String returns the string representation

func (*RefreshTrustedAdvisorCheckInput) Validate added in v1.1.21

func (s *RefreshTrustedAdvisorCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type RefreshTrustedAdvisorCheckOutput

type RefreshTrustedAdvisorCheckOutput struct {

	// The current refresh status for a check, including the amount of time until
	// the check is eligible for refresh.
	//
	// Status is a required field
	Status *TrustedAdvisorCheckRefreshStatus `locationName:"status" type:"structure" required:"true"`
	// contains filtered or unexported fields
}

The current refresh status of a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheckResponse

func (RefreshTrustedAdvisorCheckOutput) GoString added in v0.6.5

GoString returns the string representation

func (*RefreshTrustedAdvisorCheckOutput) SetStatus added in v1.5.0

SetStatus sets the Status field's value.

func (RefreshTrustedAdvisorCheckOutput) String added in v0.6.5

String returns the string representation

type ResolveCaseInput

type ResolveCaseInput struct {

	// The AWS Support case ID requested or returned in the call. The case ID is
	// an alphanumeric string formatted as shown in this example: case-12345678910-2013-c4c1d2bf33c5cf47
	CaseId *string `locationName:"caseId" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCaseRequest

func (ResolveCaseInput) GoString added in v0.6.5

func (s ResolveCaseInput) GoString() string

GoString returns the string representation

func (*ResolveCaseInput) SetCaseId added in v1.5.0

func (s *ResolveCaseInput) SetCaseId(v string) *ResolveCaseInput

SetCaseId sets the CaseId field's value.

func (ResolveCaseInput) String added in v0.6.5

func (s ResolveCaseInput) String() string

String returns the string representation

type ResolveCaseOutput

type ResolveCaseOutput struct {

	// The status of the case after the ResolveCase request was processed.
	FinalCaseStatus *string `locationName:"finalCaseStatus" type:"string"`

	// The status of the case when the ResolveCase request was sent.
	InitialCaseStatus *string `locationName:"initialCaseStatus" type:"string"`
	// contains filtered or unexported fields
}

The status of the case returned by the ResolveCase operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCaseResponse

func (ResolveCaseOutput) GoString added in v0.6.5

func (s ResolveCaseOutput) GoString() string

GoString returns the string representation

func (*ResolveCaseOutput) SetFinalCaseStatus added in v1.5.0

func (s *ResolveCaseOutput) SetFinalCaseStatus(v string) *ResolveCaseOutput

SetFinalCaseStatus sets the FinalCaseStatus field's value.

func (*ResolveCaseOutput) SetInitialCaseStatus added in v1.5.0

func (s *ResolveCaseOutput) SetInitialCaseStatus(v string) *ResolveCaseOutput

SetInitialCaseStatus sets the InitialCaseStatus field's value.

func (ResolveCaseOutput) String added in v0.6.5

func (s ResolveCaseOutput) String() string

String returns the string representation

type Service

type Service struct {

	// A list of categories that describe the type of support issue a case describes.
	// Categories consist of a category name and a category code. Category names
	// and codes are passed to AWS Support when you call CreateCase.
	Categories []*Category `locationName:"categories" type:"list"`

	// The code for an AWS service returned by the DescribeServices response. The
	// name element contains the corresponding friendly name.
	Code *string `locationName:"code" type:"string"`

	// The friendly name for an AWS service. The code element contains the corresponding
	// code.
	Name *string `locationName:"name" type:"string"`
	// contains filtered or unexported fields
}

Information about an AWS service returned by the DescribeServices operation. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/Service

func (Service) GoString added in v0.6.5

func (s Service) GoString() string

GoString returns the string representation

func (*Service) SetCategories added in v1.5.0

func (s *Service) SetCategories(v []*Category) *Service

SetCategories sets the Categories field's value.

func (*Service) SetCode added in v1.5.0

func (s *Service) SetCode(v string) *Service

SetCode sets the Code field's value.

func (*Service) SetName added in v1.5.0

func (s *Service) SetName(v string) *Service

SetName sets the Name field's value.

func (Service) String added in v0.6.5

func (s Service) String() string

String returns the string representation

type SeverityLevel

type SeverityLevel struct {

	// One of four values: "low," "medium," "high," and "urgent". These values correspond
	// to response times returned to the caller in severityLevel.name.
	Code *string `locationName:"code" type:"string"`

	// The name of the severity level that corresponds to the severity level code.
	Name *string `locationName:"name" type:"string"`
	// contains filtered or unexported fields
}

A code and name pair that represent a severity level that can be applied to a support case. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/SeverityLevel

func (SeverityLevel) GoString added in v0.6.5

func (s SeverityLevel) GoString() string

GoString returns the string representation

func (*SeverityLevel) SetCode added in v1.5.0

func (s *SeverityLevel) SetCode(v string) *SeverityLevel

SetCode sets the Code field's value.

func (*SeverityLevel) SetName added in v1.5.0

func (s *SeverityLevel) SetName(v string) *SeverityLevel

SetName sets the Name field's value.

func (SeverityLevel) String added in v0.6.5

func (s SeverityLevel) String() string

String returns the string representation

type Support

type Support struct {
	*client.Client
}

Support provides the API operation methods for making requests to AWS Support. See this package's package overview docs for details on the service.

Support methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

func New

func New(p client.ConfigProvider, cfgs ...*aws.Config) *Support

New creates a new instance of the Support client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a Support client from just a session.
svc := support.New(mySession)

// Create a Support client with additional configuration
svc := support.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*Support) AddAttachmentsToSet

func (c *Support) AddAttachmentsToSet(input *AddAttachmentsToSetInput) (*AddAttachmentsToSetOutput, error)

AddAttachmentsToSet API operation for AWS Support.

Adds one or more attachments to an attachment set. If an attachmentSetId is not specified, a new attachment set is created, and the ID of the set is returned in the response. If an attachmentSetId is specified, the attachments are added to the specified set, if it exists.

An attachment set is a temporary container for attachments that are to be added to a case or case communication. The set is available for one hour after it is created; the expiryTime returned in the response indicates when the set expires. The maximum number of attachments in a set is 3, and the maximum size of any attachment in the set is 5 MB.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation AddAttachmentsToSet for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

  • ErrCodeAttachmentSetIdNotFound "AttachmentSetIdNotFound" An attachment set with the specified ID could not be found.

  • ErrCodeAttachmentSetExpired "AttachmentSetExpired" The expiration time of the attachment set has passed. The set expires 1 hour after it is created.

  • ErrCodeAttachmentSetSizeLimitExceeded "AttachmentSetSizeLimitExceeded" A limit for the size of an attachment set has been exceeded. The limits are 3 attachments and 5 MB per attachment.

  • ErrCodeAttachmentLimitExceeded "AttachmentLimitExceeded" The limit for the number of attachment sets created in a short period of time has been exceeded.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSet

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.AddAttachmentsToSetInput{
		Attachments: []*support.Attachment{ // Required
			{ // Required
				Data:     []byte("PAYLOAD"),
				FileName: aws.String("FileName"),
			},
			// More values...
		},
		AttachmentSetId: aws.String("AttachmentSetId"),
	}
	resp, err := svc.AddAttachmentsToSet(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) AddAttachmentsToSetRequest

func (c *Support) AddAttachmentsToSetRequest(input *AddAttachmentsToSetInput) (req *request.Request, output *AddAttachmentsToSetOutput)

AddAttachmentsToSetRequest generates a "aws/request.Request" representing the client's request for the AddAttachmentsToSet operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AddAttachmentsToSet for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddAttachmentsToSet method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AddAttachmentsToSetRequest method.
req, resp := client.AddAttachmentsToSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddAttachmentsToSet

func (*Support) AddAttachmentsToSetWithContext added in v1.8.0

func (c *Support) AddAttachmentsToSetWithContext(ctx aws.Context, input *AddAttachmentsToSetInput, opts ...request.Option) (*AddAttachmentsToSetOutput, error)

AddAttachmentsToSetWithContext is the same as AddAttachmentsToSet with the addition of the ability to pass a context and additional request options.

See AddAttachmentsToSet for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) AddCommunicationToCase

func (c *Support) AddCommunicationToCase(input *AddCommunicationToCaseInput) (*AddCommunicationToCaseOutput, error)

AddCommunicationToCase API operation for AWS Support.

Adds additional customer communication to an AWS Support case. You use the caseId value to identify the case to add communication to. You can list a set of email addresses to copy on the communication using the ccEmailAddresses value. The communicationBody value contains the text of the communication.

The response indicates the success or failure of the request.

This operation implements a subset of the features of the AWS Support Center.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation AddCommunicationToCase for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

  • ErrCodeCaseIdNotFound "CaseIdNotFound" The requested caseId could not be located.

  • ErrCodeAttachmentSetIdNotFound "AttachmentSetIdNotFound" An attachment set with the specified ID could not be found.

  • ErrCodeAttachmentSetExpired "AttachmentSetExpired" The expiration time of the attachment set has passed. The set expires 1 hour after it is created.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCase

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.AddCommunicationToCaseInput{
		CommunicationBody: aws.String("CommunicationBody"), // Required
		AttachmentSetId:   aws.String("AttachmentSetId"),
		CaseId:            aws.String("CaseId"),
		CcEmailAddresses: []*string{
			aws.String("CcEmailAddress"), // Required
			// More values...
		},
	}
	resp, err := svc.AddCommunicationToCase(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) AddCommunicationToCaseRequest

func (c *Support) AddCommunicationToCaseRequest(input *AddCommunicationToCaseInput) (req *request.Request, output *AddCommunicationToCaseOutput)

AddCommunicationToCaseRequest generates a "aws/request.Request" representing the client's request for the AddCommunicationToCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See AddCommunicationToCase for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the AddCommunicationToCase method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the AddCommunicationToCaseRequest method.
req, resp := client.AddCommunicationToCaseRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/AddCommunicationToCase

func (*Support) AddCommunicationToCaseWithContext added in v1.8.0

func (c *Support) AddCommunicationToCaseWithContext(ctx aws.Context, input *AddCommunicationToCaseInput, opts ...request.Option) (*AddCommunicationToCaseOutput, error)

AddCommunicationToCaseWithContext is the same as AddCommunicationToCase with the addition of the ability to pass a context and additional request options.

See AddCommunicationToCase for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) CreateCase

func (c *Support) CreateCase(input *CreateCaseInput) (*CreateCaseOutput, error)

CreateCase API operation for AWS Support.

Creates a new case in the AWS Support Center. This operation is modeled on the behavior of the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page. Its parameters require you to specify the following information:

  • issueType. The type of issue for the case. You can specify either "customer-service" or "technical." If you do not indicate a value, the default is "technical."

  • serviceCode. The code for an AWS service. You obtain the serviceCode by calling DescribeServices.

  • categoryCode. The category for the service defined for the serviceCode value. You also obtain the category code for a service by calling DescribeServices. Each AWS service defines its own set of category codes.

  • severityCode. A value that indicates the urgency of the case, which in turn determines the response time according to your service level agreement with AWS Support. You obtain the SeverityCode by calling DescribeSeverityLevels.

  • subject. The Subject field on the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page.

  • communicationBody. The Description field on the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page.

  • attachmentSetId. The ID of a set of attachments that has been created by using AddAttachmentsToSet.

  • language. The human language in which AWS Support handles the case. English and Japanese are currently supported.

  • ccEmailAddresses. The AWS Support Center CC field on the Create Case (https://console.aws.amazon.com/support/home#/case/create) page. You can list email addresses to be copied on any correspondence about the case. The account that opens the case is already identified by passing the AWS Credentials in the HTTP POST method or in a method or function call from one of the programming languages supported by an AWS SDK (http://aws.amazon.com/tools/).

To add additional communication or attachments to an existing case, use AddCommunicationToCase.

A successful CreateCase request returns an AWS Support case number. Case numbers are used by the DescribeCases operation to retrieve existing AWS Support cases.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation CreateCase for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

  • ErrCodeCaseCreationLimitExceeded "CaseCreationLimitExceeded" The case creation limit for the account has been exceeded.

  • ErrCodeAttachmentSetIdNotFound "AttachmentSetIdNotFound" An attachment set with the specified ID could not be found.

  • ErrCodeAttachmentSetExpired "AttachmentSetExpired" The expiration time of the attachment set has passed. The set expires 1 hour after it is created.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCase

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.CreateCaseInput{
		CommunicationBody: aws.String("CommunicationBody"), // Required
		Subject:           aws.String("Subject"),           // Required
		AttachmentSetId:   aws.String("AttachmentSetId"),
		CategoryCode:      aws.String("CategoryCode"),
		CcEmailAddresses: []*string{
			aws.String("CcEmailAddress"), // Required
			// More values...
		},
		IssueType:    aws.String("IssueType"),
		Language:     aws.String("Language"),
		ServiceCode:  aws.String("ServiceCode"),
		SeverityCode: aws.String("SeverityCode"),
	}
	resp, err := svc.CreateCase(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) CreateCaseRequest

func (c *Support) CreateCaseRequest(input *CreateCaseInput) (req *request.Request, output *CreateCaseOutput)

CreateCaseRequest generates a "aws/request.Request" representing the client's request for the CreateCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See CreateCase for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the CreateCase method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the CreateCaseRequest method.
req, resp := client.CreateCaseRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/CreateCase

func (*Support) CreateCaseWithContext added in v1.8.0

func (c *Support) CreateCaseWithContext(ctx aws.Context, input *CreateCaseInput, opts ...request.Option) (*CreateCaseOutput, error)

CreateCaseWithContext is the same as CreateCase with the addition of the ability to pass a context and additional request options.

See CreateCase for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeAttachment

func (c *Support) DescribeAttachment(input *DescribeAttachmentInput) (*DescribeAttachmentOutput, error)

DescribeAttachment API operation for AWS Support.

Returns the attachment that has the specified ID. Attachment IDs are generated by the case management system when you add an attachment to a case or case communication. Attachment IDs are returned in the AttachmentDetails objects that are returned by the DescribeCommunications operation.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeAttachment for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

  • ErrCodeDescribeAttachmentLimitExceeded "DescribeAttachmentLimitExceeded" The limit for the number of DescribeAttachment requests in a short period of time has been exceeded.

  • ErrCodeAttachmentIdNotFound "AttachmentIdNotFound" An attachment with the specified ID could not be found.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachment

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeAttachmentInput{
		AttachmentId: aws.String("AttachmentId"), // Required
	}
	resp, err := svc.DescribeAttachment(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeAttachmentRequest

func (c *Support) DescribeAttachmentRequest(input *DescribeAttachmentInput) (req *request.Request, output *DescribeAttachmentOutput)

DescribeAttachmentRequest generates a "aws/request.Request" representing the client's request for the DescribeAttachment operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeAttachment for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeAttachment method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeAttachmentRequest method.
req, resp := client.DescribeAttachmentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeAttachment

func (*Support) DescribeAttachmentWithContext added in v1.8.0

func (c *Support) DescribeAttachmentWithContext(ctx aws.Context, input *DescribeAttachmentInput, opts ...request.Option) (*DescribeAttachmentOutput, error)

DescribeAttachmentWithContext is the same as DescribeAttachment with the addition of the ability to pass a context and additional request options.

See DescribeAttachment for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeCases

func (c *Support) DescribeCases(input *DescribeCasesInput) (*DescribeCasesOutput, error)

DescribeCases API operation for AWS Support.

Returns a list of cases that you specify by passing one or more case IDs. In addition, you can filter the cases by date by setting values for the afterTime and beforeTime request parameters. You can set values for the includeResolvedCases and includeCommunications request parameters to control how much information is returned.

Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.

The response returns the following in JSON format:

  • One or more CaseDetails data types.

  • One or more nextToken values, which specify where to paginate the returned records represented by the CaseDetails objects.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeCases for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

  • ErrCodeCaseIdNotFound "CaseIdNotFound" The requested caseId could not be located.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCases

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeCasesInput{
		AfterTime:  aws.String("AfterTime"),
		BeforeTime: aws.String("BeforeTime"),
		CaseIdList: []*string{
			aws.String("CaseId"), // Required
			// More values...
		},
		DisplayId:             aws.String("DisplayId"),
		IncludeCommunications: aws.Bool(true),
		IncludeResolvedCases:  aws.Bool(true),
		Language:              aws.String("Language"),
		MaxResults:            aws.Int64(1),
		NextToken:             aws.String("NextToken"),
	}
	resp, err := svc.DescribeCases(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeCasesPages

func (c *Support) DescribeCasesPages(input *DescribeCasesInput, fn func(*DescribeCasesOutput, bool) bool) error

DescribeCasesPages iterates over the pages of a DescribeCases operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeCases method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a DescribeCases operation.
pageNum := 0
err := client.DescribeCasesPages(params,
    func(page *DescribeCasesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Support) DescribeCasesPagesWithContext added in v1.8.0

func (c *Support) DescribeCasesPagesWithContext(ctx aws.Context, input *DescribeCasesInput, fn func(*DescribeCasesOutput, bool) bool, opts ...request.Option) error

DescribeCasesPagesWithContext same as DescribeCasesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeCasesRequest

func (c *Support) DescribeCasesRequest(input *DescribeCasesInput) (req *request.Request, output *DescribeCasesOutput)

DescribeCasesRequest generates a "aws/request.Request" representing the client's request for the DescribeCases operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeCases for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeCases method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeCasesRequest method.
req, resp := client.DescribeCasesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCases

func (*Support) DescribeCasesWithContext added in v1.8.0

func (c *Support) DescribeCasesWithContext(ctx aws.Context, input *DescribeCasesInput, opts ...request.Option) (*DescribeCasesOutput, error)

DescribeCasesWithContext is the same as DescribeCases with the addition of the ability to pass a context and additional request options.

See DescribeCases for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeCommunications

func (c *Support) DescribeCommunications(input *DescribeCommunicationsInput) (*DescribeCommunicationsOutput, error)

DescribeCommunications API operation for AWS Support.

Returns communications (and attachments) for one or more support cases. You can use the afterTime and beforeTime parameters to filter by date. You can use the caseId parameter to restrict the results to a particular case.

Case data is available for 12 months after creation. If a case was created more than 12 months ago, a request for data might cause an error.

You can use the maxResults and nextToken parameters to control the pagination of the result set. Set maxResults to the number of cases you want displayed on each page, and use nextToken to specify the resumption of pagination.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeCommunications for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

  • ErrCodeCaseIdNotFound "CaseIdNotFound" The requested caseId could not be located.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunications

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeCommunicationsInput{
		CaseId:     aws.String("CaseId"), // Required
		AfterTime:  aws.String("AfterTime"),
		BeforeTime: aws.String("BeforeTime"),
		MaxResults: aws.Int64(1),
		NextToken:  aws.String("NextToken"),
	}
	resp, err := svc.DescribeCommunications(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeCommunicationsPages

func (c *Support) DescribeCommunicationsPages(input *DescribeCommunicationsInput, fn func(*DescribeCommunicationsOutput, bool) bool) error

DescribeCommunicationsPages iterates over the pages of a DescribeCommunications operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See DescribeCommunications method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a DescribeCommunications operation.
pageNum := 0
err := client.DescribeCommunicationsPages(params,
    func(page *DescribeCommunicationsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Support) DescribeCommunicationsPagesWithContext added in v1.8.0

func (c *Support) DescribeCommunicationsPagesWithContext(ctx aws.Context, input *DescribeCommunicationsInput, fn func(*DescribeCommunicationsOutput, bool) bool, opts ...request.Option) error

DescribeCommunicationsPagesWithContext same as DescribeCommunicationsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeCommunicationsRequest

func (c *Support) DescribeCommunicationsRequest(input *DescribeCommunicationsInput) (req *request.Request, output *DescribeCommunicationsOutput)

DescribeCommunicationsRequest generates a "aws/request.Request" representing the client's request for the DescribeCommunications operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeCommunications for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeCommunications method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeCommunicationsRequest method.
req, resp := client.DescribeCommunicationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeCommunications

func (*Support) DescribeCommunicationsWithContext added in v1.8.0

func (c *Support) DescribeCommunicationsWithContext(ctx aws.Context, input *DescribeCommunicationsInput, opts ...request.Option) (*DescribeCommunicationsOutput, error)

DescribeCommunicationsWithContext is the same as DescribeCommunications with the addition of the ability to pass a context and additional request options.

See DescribeCommunications for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeServices

func (c *Support) DescribeServices(input *DescribeServicesInput) (*DescribeServicesOutput, error)

DescribeServices API operation for AWS Support.

Returns the current list of AWS services and a list of service categories that applies to each one. You then use service names and categories in your CreateCase requests. Each AWS service has its own set of categories.

The service codes and category codes correspond to the values that are displayed in the Service and Category drop-down lists on the AWS Support Center Create Case (https://console.aws.amazon.com/support/home#/case/create) page. The values in those fields, however, do not necessarily match the service codes and categories returned by the DescribeServices request. Always use the service codes and categories obtained programmatically. This practice ensures that you always have the most recent set of service and category codes.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeServices for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServices

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeServicesInput{
		Language: aws.String("Language"),
		ServiceCodeList: []*string{
			aws.String("ServiceCode"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeServices(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeServicesRequest

func (c *Support) DescribeServicesRequest(input *DescribeServicesInput) (req *request.Request, output *DescribeServicesOutput)

DescribeServicesRequest generates a "aws/request.Request" representing the client's request for the DescribeServices operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeServices for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeServices method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeServicesRequest method.
req, resp := client.DescribeServicesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeServices

func (*Support) DescribeServicesWithContext added in v1.8.0

func (c *Support) DescribeServicesWithContext(ctx aws.Context, input *DescribeServicesInput, opts ...request.Option) (*DescribeServicesOutput, error)

DescribeServicesWithContext is the same as DescribeServices with the addition of the ability to pass a context and additional request options.

See DescribeServices for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeSeverityLevels

func (c *Support) DescribeSeverityLevels(input *DescribeSeverityLevelsInput) (*DescribeSeverityLevelsOutput, error)

DescribeSeverityLevels API operation for AWS Support.

Returns the list of severity levels that you can assign to an AWS Support case. The severity level for a case is also a field in the CaseDetails data type included in any CreateCase request.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeSeverityLevels for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevels

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeSeverityLevelsInput{
		Language: aws.String("Language"),
	}
	resp, err := svc.DescribeSeverityLevels(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeSeverityLevelsRequest

func (c *Support) DescribeSeverityLevelsRequest(input *DescribeSeverityLevelsInput) (req *request.Request, output *DescribeSeverityLevelsOutput)

DescribeSeverityLevelsRequest generates a "aws/request.Request" representing the client's request for the DescribeSeverityLevels operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeSeverityLevels for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeSeverityLevels method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeSeverityLevelsRequest method.
req, resp := client.DescribeSeverityLevelsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeSeverityLevels

func (*Support) DescribeSeverityLevelsWithContext added in v1.8.0

func (c *Support) DescribeSeverityLevelsWithContext(ctx aws.Context, input *DescribeSeverityLevelsInput, opts ...request.Option) (*DescribeSeverityLevelsOutput, error)

DescribeSeverityLevelsWithContext is the same as DescribeSeverityLevels with the addition of the ability to pass a context and additional request options.

See DescribeSeverityLevels for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeTrustedAdvisorCheckRefreshStatuses

DescribeTrustedAdvisorCheckRefreshStatuses API operation for AWS Support.

Returns the refresh status of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

Some checks are refreshed automatically, and their refresh statuses cannot be retrieved by using this operation. Use of the DescribeTrustedAdvisorCheckRefreshStatuses operation for these checks causes an InvalidParameterValue error.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckRefreshStatuses for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatuses

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeTrustedAdvisorCheckRefreshStatusesInput{
		CheckIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTrustedAdvisorCheckRefreshStatuses(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeTrustedAdvisorCheckRefreshStatusesRequest

func (c *Support) DescribeTrustedAdvisorCheckRefreshStatusesRequest(input *DescribeTrustedAdvisorCheckRefreshStatusesInput) (req *request.Request, output *DescribeTrustedAdvisorCheckRefreshStatusesOutput)

DescribeTrustedAdvisorCheckRefreshStatusesRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckRefreshStatuses operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTrustedAdvisorCheckRefreshStatuses for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckRefreshStatuses method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTrustedAdvisorCheckRefreshStatusesRequest method.
req, resp := client.DescribeTrustedAdvisorCheckRefreshStatusesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckRefreshStatuses

func (*Support) DescribeTrustedAdvisorCheckRefreshStatusesWithContext added in v1.8.0

func (c *Support) DescribeTrustedAdvisorCheckRefreshStatusesWithContext(ctx aws.Context, input *DescribeTrustedAdvisorCheckRefreshStatusesInput, opts ...request.Option) (*DescribeTrustedAdvisorCheckRefreshStatusesOutput, error)

DescribeTrustedAdvisorCheckRefreshStatusesWithContext is the same as DescribeTrustedAdvisorCheckRefreshStatuses with the addition of the ability to pass a context and additional request options.

See DescribeTrustedAdvisorCheckRefreshStatuses for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeTrustedAdvisorCheckResult

func (c *Support) DescribeTrustedAdvisorCheckResult(input *DescribeTrustedAdvisorCheckResultInput) (*DescribeTrustedAdvisorCheckResultOutput, error)

DescribeTrustedAdvisorCheckResult API operation for AWS Support.

Returns the results of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

The response contains a TrustedAdvisorCheckResult object, which contains these three objects:

  • TrustedAdvisorCategorySpecificSummary

  • TrustedAdvisorResourceDetail

  • TrustedAdvisorResourcesSummary

In addition, the response contains these fields:

  • status. The alert status of the check: "ok" (green), "warning" (yellow), "error" (red), or "not_available".

  • timestamp. The time of the last refresh of the check.

  • checkId. The unique identifier for the check.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckResult for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResult

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeTrustedAdvisorCheckResultInput{
		CheckId:  aws.String("String"), // Required
		Language: aws.String("String"),
	}
	resp, err := svc.DescribeTrustedAdvisorCheckResult(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeTrustedAdvisorCheckResultRequest

func (c *Support) DescribeTrustedAdvisorCheckResultRequest(input *DescribeTrustedAdvisorCheckResultInput) (req *request.Request, output *DescribeTrustedAdvisorCheckResultOutput)

DescribeTrustedAdvisorCheckResultRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckResult operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTrustedAdvisorCheckResult for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckResult method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTrustedAdvisorCheckResultRequest method.
req, resp := client.DescribeTrustedAdvisorCheckResultRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckResult

func (*Support) DescribeTrustedAdvisorCheckResultWithContext added in v1.8.0

func (c *Support) DescribeTrustedAdvisorCheckResultWithContext(ctx aws.Context, input *DescribeTrustedAdvisorCheckResultInput, opts ...request.Option) (*DescribeTrustedAdvisorCheckResultOutput, error)

DescribeTrustedAdvisorCheckResultWithContext is the same as DescribeTrustedAdvisorCheckResult with the addition of the ability to pass a context and additional request options.

See DescribeTrustedAdvisorCheckResult for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeTrustedAdvisorCheckSummaries

func (c *Support) DescribeTrustedAdvisorCheckSummaries(input *DescribeTrustedAdvisorCheckSummariesInput) (*DescribeTrustedAdvisorCheckSummariesOutput, error)

DescribeTrustedAdvisorCheckSummaries API operation for AWS Support.

Returns the summaries of the results of the Trusted Advisor checks that have the specified check IDs. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

The response contains an array of TrustedAdvisorCheckSummary objects.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorCheckSummaries for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummaries

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeTrustedAdvisorCheckSummariesInput{
		CheckIds: []*string{ // Required
			aws.String("String"), // Required
			// More values...
		},
	}
	resp, err := svc.DescribeTrustedAdvisorCheckSummaries(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeTrustedAdvisorCheckSummariesRequest

func (c *Support) DescribeTrustedAdvisorCheckSummariesRequest(input *DescribeTrustedAdvisorCheckSummariesInput) (req *request.Request, output *DescribeTrustedAdvisorCheckSummariesOutput)

DescribeTrustedAdvisorCheckSummariesRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorCheckSummaries operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTrustedAdvisorCheckSummaries for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorCheckSummaries method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTrustedAdvisorCheckSummariesRequest method.
req, resp := client.DescribeTrustedAdvisorCheckSummariesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorCheckSummaries

func (*Support) DescribeTrustedAdvisorCheckSummariesWithContext added in v1.8.0

func (c *Support) DescribeTrustedAdvisorCheckSummariesWithContext(ctx aws.Context, input *DescribeTrustedAdvisorCheckSummariesInput, opts ...request.Option) (*DescribeTrustedAdvisorCheckSummariesOutput, error)

DescribeTrustedAdvisorCheckSummariesWithContext is the same as DescribeTrustedAdvisorCheckSummaries with the addition of the ability to pass a context and additional request options.

See DescribeTrustedAdvisorCheckSummaries for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) DescribeTrustedAdvisorChecks

func (c *Support) DescribeTrustedAdvisorChecks(input *DescribeTrustedAdvisorChecksInput) (*DescribeTrustedAdvisorChecksOutput, error)

DescribeTrustedAdvisorChecks API operation for AWS Support.

Returns information about all available Trusted Advisor checks, including name, ID, category, description, and metadata. You must specify a language code; English ("en") and Japanese ("ja") are currently supported. The response contains a TrustedAdvisorCheckDescription for each check.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation DescribeTrustedAdvisorChecks for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecks

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.DescribeTrustedAdvisorChecksInput{
		Language: aws.String("String"), // Required
	}
	resp, err := svc.DescribeTrustedAdvisorChecks(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) DescribeTrustedAdvisorChecksRequest

func (c *Support) DescribeTrustedAdvisorChecksRequest(input *DescribeTrustedAdvisorChecksInput) (req *request.Request, output *DescribeTrustedAdvisorChecksOutput)

DescribeTrustedAdvisorChecksRequest generates a "aws/request.Request" representing the client's request for the DescribeTrustedAdvisorChecks operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See DescribeTrustedAdvisorChecks for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the DescribeTrustedAdvisorChecks method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the DescribeTrustedAdvisorChecksRequest method.
req, resp := client.DescribeTrustedAdvisorChecksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/DescribeTrustedAdvisorChecks

func (*Support) DescribeTrustedAdvisorChecksWithContext added in v1.8.0

func (c *Support) DescribeTrustedAdvisorChecksWithContext(ctx aws.Context, input *DescribeTrustedAdvisorChecksInput, opts ...request.Option) (*DescribeTrustedAdvisorChecksOutput, error)

DescribeTrustedAdvisorChecksWithContext is the same as DescribeTrustedAdvisorChecks with the addition of the ability to pass a context and additional request options.

See DescribeTrustedAdvisorChecks for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) RefreshTrustedAdvisorCheck

func (c *Support) RefreshTrustedAdvisorCheck(input *RefreshTrustedAdvisorCheckInput) (*RefreshTrustedAdvisorCheckOutput, error)

RefreshTrustedAdvisorCheck API operation for AWS Support.

Requests a refresh of the Trusted Advisor check that has the specified check ID. Check IDs can be obtained by calling DescribeTrustedAdvisorChecks.

Some checks are refreshed automatically, and they cannot be refreshed by using this operation. Use of the RefreshTrustedAdvisorCheck operation for these checks causes an InvalidParameterValue error.

The response contains a TrustedAdvisorCheckRefreshStatus object, which contains these fields:

  • status. The refresh status of the check: "none", "enqueued", "processing", "success", or "abandoned".

  • millisUntilNextRefreshable. The amount of time, in milliseconds, until the check is eligible for refresh.

  • checkId. The unique identifier for the check.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation RefreshTrustedAdvisorCheck for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheck

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.RefreshTrustedAdvisorCheckInput{
		CheckId: aws.String("String"), // Required
	}
	resp, err := svc.RefreshTrustedAdvisorCheck(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) RefreshTrustedAdvisorCheckRequest

func (c *Support) RefreshTrustedAdvisorCheckRequest(input *RefreshTrustedAdvisorCheckInput) (req *request.Request, output *RefreshTrustedAdvisorCheckOutput)

RefreshTrustedAdvisorCheckRequest generates a "aws/request.Request" representing the client's request for the RefreshTrustedAdvisorCheck operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See RefreshTrustedAdvisorCheck for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the RefreshTrustedAdvisorCheck method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the RefreshTrustedAdvisorCheckRequest method.
req, resp := client.RefreshTrustedAdvisorCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/RefreshTrustedAdvisorCheck

func (*Support) RefreshTrustedAdvisorCheckWithContext added in v1.8.0

func (c *Support) RefreshTrustedAdvisorCheckWithContext(ctx aws.Context, input *RefreshTrustedAdvisorCheckInput, opts ...request.Option) (*RefreshTrustedAdvisorCheckOutput, error)

RefreshTrustedAdvisorCheckWithContext is the same as RefreshTrustedAdvisorCheck with the addition of the ability to pass a context and additional request options.

See RefreshTrustedAdvisorCheck for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Support) ResolveCase

func (c *Support) ResolveCase(input *ResolveCaseInput) (*ResolveCaseOutput, error)

ResolveCase API operation for AWS Support.

Takes a caseId and returns the initial state of the case along with the state of the case after the call to ResolveCase completed.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Support's API operation ResolveCase for usage and error information.

Returned Error Codes:

  • ErrCodeInternalServerError "InternalServerError" An internal server error occurred.

  • ErrCodeCaseIdNotFound "CaseIdNotFound" The requested caseId could not be located.

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCase

Example
package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/support"
)

func main() {
	sess := session.Must(session.NewSession())

	svc := support.New(sess)

	params := &support.ResolveCaseInput{
		CaseId: aws.String("CaseId"),
	}
	resp, err := svc.ResolveCase(params)

	if err != nil {
		// Print the error, cast err to awserr.Error to get the Code and
		// Message from an error.
		fmt.Println(err.Error())
		return
	}

	// Pretty-print the response data.
	fmt.Println(resp)
}
Output:

func (*Support) ResolveCaseRequest

func (c *Support) ResolveCaseRequest(input *ResolveCaseInput) (req *request.Request, output *ResolveCaseOutput)

ResolveCaseRequest generates a "aws/request.Request" representing the client's request for the ResolveCase operation. The "output" return value can be used to capture response data after the request's "Send" method is called.

See ResolveCase for usage and error information.

Creating a request object using this method should be used when you want to inject custom logic into the request's lifecycle using a custom handler, or if you want to access properties on the request object before or after sending the request. If you just want the service response, call the ResolveCase method directly instead.

Note: You must call the "Send" method on the returned request object in order to execute the request.

// Example sending a request using the ResolveCaseRequest method.
req, resp := client.ResolveCaseRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/ResolveCase

func (*Support) ResolveCaseWithContext added in v1.8.0

func (c *Support) ResolveCaseWithContext(ctx aws.Context, input *ResolveCaseInput, opts ...request.Option) (*ResolveCaseOutput, error)

ResolveCaseWithContext is the same as ResolveCase with the addition of the ability to pass a context and additional request options.

See ResolveCase for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type TrustedAdvisorCategorySpecificSummary

type TrustedAdvisorCategorySpecificSummary struct {

	// The summary information about cost savings for a Trusted Advisor check that
	// is in the Cost Optimizing category.
	CostOptimizing *TrustedAdvisorCostOptimizingSummary `locationName:"costOptimizing" type:"structure"`
	// contains filtered or unexported fields
}

The container for summary information that relates to the category of the Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCategorySpecificSummary

func (TrustedAdvisorCategorySpecificSummary) GoString added in v0.6.5

GoString returns the string representation

func (*TrustedAdvisorCategorySpecificSummary) SetCostOptimizing added in v1.5.0

SetCostOptimizing sets the CostOptimizing field's value.

func (TrustedAdvisorCategorySpecificSummary) String added in v0.6.5

String returns the string representation

type TrustedAdvisorCheckDescription

type TrustedAdvisorCheckDescription struct {

	// The category of the Trusted Advisor check.
	//
	// Category is a required field
	Category *string `locationName:"category" type:"string" required:"true"`

	// The description of the Trusted Advisor check, which includes the alert criteria
	// and recommended actions (contains HTML markup).
	//
	// Description is a required field
	Description *string `locationName:"description" type:"string" required:"true"`

	// The unique identifier for the Trusted Advisor check.
	//
	// Id is a required field
	Id *string `locationName:"id" type:"string" required:"true"`

	// The column headings for the data returned by the Trusted Advisor check. The
	// order of the headings corresponds to the order of the data in the Metadata
	// element of the TrustedAdvisorResourceDetail for the check. Metadata contains
	// all the data that is shown in the Excel download, even in those cases where
	// the UI shows just summary data.
	//
	// Metadata is a required field
	Metadata []*string `locationName:"metadata" type:"list" required:"true"`

	// The display name for the Trusted Advisor check.
	//
	// Name is a required field
	Name *string `locationName:"name" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The description and metadata for a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckDescription

func (TrustedAdvisorCheckDescription) GoString added in v0.6.5

GoString returns the string representation

func (*TrustedAdvisorCheckDescription) SetCategory added in v1.5.0

SetCategory sets the Category field's value.

func (*TrustedAdvisorCheckDescription) SetDescription added in v1.5.0

SetDescription sets the Description field's value.

func (*TrustedAdvisorCheckDescription) SetId added in v1.5.0

SetId sets the Id field's value.

func (*TrustedAdvisorCheckDescription) SetMetadata added in v1.5.0

SetMetadata sets the Metadata field's value.

func (*TrustedAdvisorCheckDescription) SetName added in v1.5.0

SetName sets the Name field's value.

func (TrustedAdvisorCheckDescription) String added in v0.6.5

String returns the string representation

type TrustedAdvisorCheckRefreshStatus

type TrustedAdvisorCheckRefreshStatus struct {

	// The unique identifier for the Trusted Advisor check.
	//
	// CheckId is a required field
	CheckId *string `locationName:"checkId" type:"string" required:"true"`

	// The amount of time, in milliseconds, until the Trusted Advisor check is eligible
	// for refresh.
	//
	// MillisUntilNextRefreshable is a required field
	MillisUntilNextRefreshable *int64 `locationName:"millisUntilNextRefreshable" type:"long" required:"true"`

	// The status of the Trusted Advisor check for which a refresh has been requested:
	// "none", "enqueued", "processing", "success", or "abandoned".
	//
	// Status is a required field
	Status *string `locationName:"status" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The refresh status of a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckRefreshStatus

func (TrustedAdvisorCheckRefreshStatus) GoString added in v0.6.5

GoString returns the string representation

func (*TrustedAdvisorCheckRefreshStatus) SetCheckId added in v1.5.0

SetCheckId sets the CheckId field's value.

func (*TrustedAdvisorCheckRefreshStatus) SetMillisUntilNextRefreshable added in v1.5.0

func (s *TrustedAdvisorCheckRefreshStatus) SetMillisUntilNextRefreshable(v int64) *TrustedAdvisorCheckRefreshStatus

SetMillisUntilNextRefreshable sets the MillisUntilNextRefreshable field's value.

func (*TrustedAdvisorCheckRefreshStatus) SetStatus added in v1.5.0

SetStatus sets the Status field's value.

func (TrustedAdvisorCheckRefreshStatus) String added in v0.6.5

String returns the string representation

type TrustedAdvisorCheckResult

type TrustedAdvisorCheckResult struct {

	// Summary information that relates to the category of the check. Cost Optimizing
	// is the only category that is currently supported.
	//
	// CategorySpecificSummary is a required field
	CategorySpecificSummary *TrustedAdvisorCategorySpecificSummary `locationName:"categorySpecificSummary" type:"structure" required:"true"`

	// The unique identifier for the Trusted Advisor check.
	//
	// CheckId is a required field
	CheckId *string `locationName:"checkId" type:"string" required:"true"`

	// The details about each resource listed in the check result.
	//
	// FlaggedResources is a required field
	FlaggedResources []*TrustedAdvisorResourceDetail `locationName:"flaggedResources" type:"list" required:"true"`

	// Details about AWS resources that were analyzed in a call to Trusted Advisor
	// DescribeTrustedAdvisorCheckSummaries.
	//
	// ResourcesSummary is a required field
	ResourcesSummary *TrustedAdvisorResourcesSummary `locationName:"resourcesSummary" type:"structure" required:"true"`

	// The alert status of the check: "ok" (green), "warning" (yellow), "error"
	// (red), or "not_available".
	//
	// Status is a required field
	Status *string `locationName:"status" type:"string" required:"true"`

	// The time of the last refresh of the check.
	//
	// Timestamp is a required field
	Timestamp *string `locationName:"timestamp" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The results of a Trusted Advisor check returned by DescribeTrustedAdvisorCheckResult. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckResult

func (TrustedAdvisorCheckResult) GoString added in v0.6.5

func (s TrustedAdvisorCheckResult) GoString() string

GoString returns the string representation

func (*TrustedAdvisorCheckResult) SetCategorySpecificSummary added in v1.5.0

SetCategorySpecificSummary sets the CategorySpecificSummary field's value.

func (*TrustedAdvisorCheckResult) SetCheckId added in v1.5.0

SetCheckId sets the CheckId field's value.

func (*TrustedAdvisorCheckResult) SetFlaggedResources added in v1.5.0

SetFlaggedResources sets the FlaggedResources field's value.

func (*TrustedAdvisorCheckResult) SetResourcesSummary added in v1.5.0

SetResourcesSummary sets the ResourcesSummary field's value.

func (*TrustedAdvisorCheckResult) SetStatus added in v1.5.0

SetStatus sets the Status field's value.

func (*TrustedAdvisorCheckResult) SetTimestamp added in v1.5.0

SetTimestamp sets the Timestamp field's value.

func (TrustedAdvisorCheckResult) String added in v0.6.5

func (s TrustedAdvisorCheckResult) String() string

String returns the string representation

type TrustedAdvisorCheckSummary

type TrustedAdvisorCheckSummary struct {

	// Summary information that relates to the category of the check. Cost Optimizing
	// is the only category that is currently supported.
	//
	// CategorySpecificSummary is a required field
	CategorySpecificSummary *TrustedAdvisorCategorySpecificSummary `locationName:"categorySpecificSummary" type:"structure" required:"true"`

	// The unique identifier for the Trusted Advisor check.
	//
	// CheckId is a required field
	CheckId *string `locationName:"checkId" type:"string" required:"true"`

	// Specifies whether the Trusted Advisor check has flagged resources.
	HasFlaggedResources *bool `locationName:"hasFlaggedResources" type:"boolean"`

	// Details about AWS resources that were analyzed in a call to Trusted Advisor
	// DescribeTrustedAdvisorCheckSummaries.
	//
	// ResourcesSummary is a required field
	ResourcesSummary *TrustedAdvisorResourcesSummary `locationName:"resourcesSummary" type:"structure" required:"true"`

	// The alert status of the check: "ok" (green), "warning" (yellow), "error"
	// (red), or "not_available".
	//
	// Status is a required field
	Status *string `locationName:"status" type:"string" required:"true"`

	// The time of the last refresh of the check.
	//
	// Timestamp is a required field
	Timestamp *string `locationName:"timestamp" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A summary of a Trusted Advisor check result, including the alert status, last refresh, and number of resources examined. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCheckSummary

func (TrustedAdvisorCheckSummary) GoString added in v0.6.5

func (s TrustedAdvisorCheckSummary) GoString() string

GoString returns the string representation

func (*TrustedAdvisorCheckSummary) SetCategorySpecificSummary added in v1.5.0

SetCategorySpecificSummary sets the CategorySpecificSummary field's value.

func (*TrustedAdvisorCheckSummary) SetCheckId added in v1.5.0

SetCheckId sets the CheckId field's value.

func (*TrustedAdvisorCheckSummary) SetHasFlaggedResources added in v1.5.0

func (s *TrustedAdvisorCheckSummary) SetHasFlaggedResources(v bool) *TrustedAdvisorCheckSummary

SetHasFlaggedResources sets the HasFlaggedResources field's value.

func (*TrustedAdvisorCheckSummary) SetResourcesSummary added in v1.5.0

SetResourcesSummary sets the ResourcesSummary field's value.

func (*TrustedAdvisorCheckSummary) SetStatus added in v1.5.0

SetStatus sets the Status field's value.

func (*TrustedAdvisorCheckSummary) SetTimestamp added in v1.5.0

SetTimestamp sets the Timestamp field's value.

func (TrustedAdvisorCheckSummary) String added in v0.6.5

String returns the string representation

type TrustedAdvisorCostOptimizingSummary

type TrustedAdvisorCostOptimizingSummary struct {

	// The estimated monthly savings that might be realized if the recommended actions
	// are taken.
	//
	// EstimatedMonthlySavings is a required field
	EstimatedMonthlySavings *float64 `locationName:"estimatedMonthlySavings" type:"double" required:"true"`

	// The estimated percentage of savings that might be realized if the recommended
	// actions are taken.
	//
	// EstimatedPercentMonthlySavings is a required field
	EstimatedPercentMonthlySavings *float64 `locationName:"estimatedPercentMonthlySavings" type:"double" required:"true"`
	// contains filtered or unexported fields
}

The estimated cost savings that might be realized if the recommended actions are taken. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorCostOptimizingSummary

func (TrustedAdvisorCostOptimizingSummary) GoString added in v0.6.5

GoString returns the string representation

func (*TrustedAdvisorCostOptimizingSummary) SetEstimatedMonthlySavings added in v1.5.0

SetEstimatedMonthlySavings sets the EstimatedMonthlySavings field's value.

func (*TrustedAdvisorCostOptimizingSummary) SetEstimatedPercentMonthlySavings added in v1.5.0

func (s *TrustedAdvisorCostOptimizingSummary) SetEstimatedPercentMonthlySavings(v float64) *TrustedAdvisorCostOptimizingSummary

SetEstimatedPercentMonthlySavings sets the EstimatedPercentMonthlySavings field's value.

func (TrustedAdvisorCostOptimizingSummary) String added in v0.6.5

String returns the string representation

type TrustedAdvisorResourceDetail

type TrustedAdvisorResourceDetail struct {

	// Specifies whether the AWS resource was ignored by Trusted Advisor because
	// it was marked as suppressed by the user.
	IsSuppressed *bool `locationName:"isSuppressed" type:"boolean"`

	// Additional information about the identified resource. The exact metadata
	// and its order can be obtained by inspecting the TrustedAdvisorCheckDescription
	// object returned by the call to DescribeTrustedAdvisorChecks. Metadata contains
	// all the data that is shown in the Excel download, even in those cases where
	// the UI shows just summary data.
	//
	// Metadata is a required field
	Metadata []*string `locationName:"metadata" type:"list" required:"true"`

	// The AWS region in which the identified resource is located.
	Region *string `locationName:"region" type:"string"`

	// The unique identifier for the identified resource.
	//
	// ResourceId is a required field
	ResourceId *string `locationName:"resourceId" type:"string" required:"true"`

	// The status code for the resource identified in the Trusted Advisor check.
	//
	// Status is a required field
	Status *string `locationName:"status" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Contains information about a resource identified by a Trusted Advisor check. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorResourceDetail

func (TrustedAdvisorResourceDetail) GoString added in v0.6.5

func (s TrustedAdvisorResourceDetail) GoString() string

GoString returns the string representation

func (*TrustedAdvisorResourceDetail) SetIsSuppressed added in v1.5.0

SetIsSuppressed sets the IsSuppressed field's value.

func (*TrustedAdvisorResourceDetail) SetMetadata added in v1.5.0

SetMetadata sets the Metadata field's value.

func (*TrustedAdvisorResourceDetail) SetRegion added in v1.5.0

SetRegion sets the Region field's value.

func (*TrustedAdvisorResourceDetail) SetResourceId added in v1.5.0

SetResourceId sets the ResourceId field's value.

func (*TrustedAdvisorResourceDetail) SetStatus added in v1.5.0

SetStatus sets the Status field's value.

func (TrustedAdvisorResourceDetail) String added in v0.6.5

String returns the string representation

type TrustedAdvisorResourcesSummary

type TrustedAdvisorResourcesSummary struct {

	// The number of AWS resources that were flagged (listed) by the Trusted Advisor
	// check.
	//
	// ResourcesFlagged is a required field
	ResourcesFlagged *int64 `locationName:"resourcesFlagged" type:"long" required:"true"`

	// The number of AWS resources ignored by Trusted Advisor because information
	// was unavailable.
	//
	// ResourcesIgnored is a required field
	ResourcesIgnored *int64 `locationName:"resourcesIgnored" type:"long" required:"true"`

	// The number of AWS resources that were analyzed by the Trusted Advisor check.
	//
	// ResourcesProcessed is a required field
	ResourcesProcessed *int64 `locationName:"resourcesProcessed" type:"long" required:"true"`

	// The number of AWS resources ignored by Trusted Advisor because they were
	// marked as suppressed by the user.
	//
	// ResourcesSuppressed is a required field
	ResourcesSuppressed *int64 `locationName:"resourcesSuppressed" type:"long" required:"true"`
	// contains filtered or unexported fields
}

Details about AWS resources that were analyzed in a call to Trusted Advisor DescribeTrustedAdvisorCheckSummaries. Please also see https://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/TrustedAdvisorResourcesSummary

func (TrustedAdvisorResourcesSummary) GoString added in v0.6.5

GoString returns the string representation

func (*TrustedAdvisorResourcesSummary) SetResourcesFlagged added in v1.5.0

SetResourcesFlagged sets the ResourcesFlagged field's value.

func (*TrustedAdvisorResourcesSummary) SetResourcesIgnored added in v1.5.0

SetResourcesIgnored sets the ResourcesIgnored field's value.

func (*TrustedAdvisorResourcesSummary) SetResourcesProcessed added in v1.5.0

SetResourcesProcessed sets the ResourcesProcessed field's value.

func (*TrustedAdvisorResourcesSummary) SetResourcesSuppressed added in v1.5.0

SetResourcesSuppressed sets the ResourcesSuppressed field's value.

func (TrustedAdvisorResourcesSummary) String added in v0.6.5

String returns the string representation

Directories

Path Synopsis
Package supportiface provides an interface to enable mocking the AWS Support service client for testing your code.
Package supportiface provides an interface to enable mocking the AWS Support service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL