route53

package module
v0.26.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 1, 2020 License: Apache-2.0 Imports: 27 Imported by: 366

Documentation

Index

Constants

View Source 
const ServiceAPIVersion = "2013-04-01"
View Source 
const ServiceID = "Route 53"

Variables

This section is empty.

Functions

func AddResolveEndpointMiddleware 

func AddResolveEndpointMiddleware(stack *middleware.Stack, options ResolveEndpointMiddlewareOptions)

func NewDefaultEndpointResolver 

func NewDefaultEndpointResolver() *internalendpoints.Resolver

NewDefaultEndpointResolver constructs a new service endpoint resolver

func RemoveResolveEndpointMiddleware 

func RemoveResolveEndpointMiddleware(stack *middleware.Stack) error

Types

type AssociateVPCWithHostedZoneInput 

type AssociateVPCWithHostedZoneInput struct {

	// The ID of the private hosted zone that you want to associate an Amazon VPC with.
	// Note that you can't associate a VPC with a hosted zone that doesn't have an
	// existing VPC association.
	//
	// This member is required.
	HostedZoneId *string

	// Optional: A comment about the association request.
	Comment *string

	// A complex type that contains information about the VPC that you want to
	// associate with a private hosted zone.
	//
	// This member is required.
	VPC *types.VPC
}

A complex type that contains information about the request to associate a VPC with a private hosted zone.

type AssociateVPCWithHostedZoneOutput 

type AssociateVPCWithHostedZoneOutput struct {

	// A complex type that describes the changes made to your hosted zone.
	//
	// This member is required.
	ChangeInfo *types.ChangeInfo

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the AssociateVPCWithHostedZone request.

type ChangeResourceRecordSetsInput 

type ChangeResourceRecordSetsInput struct {

	// A complex type that contains an optional comment and the Changes element.
	//
	// This member is required.
	ChangeBatch *types.ChangeBatch

	// The ID of the hosted zone that contains the resource record sets that you want
	// to change.
	//
	// This member is required.
	HostedZoneId *string
}

A complex type that contains change information for the resource record set.

type ChangeResourceRecordSetsOutput 

type ChangeResourceRecordSetsOutput struct {

	// A complex type that contains information about changes made to your hosted zone.
	// This element contains an ID that you use when performing a GetChange
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_GetChange.html)
	// action to get detailed information about the change.
	//
	// This member is required.
	ChangeInfo *types.ChangeInfo

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type containing the response for the request.

type ChangeTagsForResourceInput 

type ChangeTagsForResourceInput struct {

	// The ID of the resource for which you want to add, change, or delete tags.
	//
	// This member is required.
	ResourceId *string

	// A complex type that contains a list of the tags that you want to delete from the
	// specified health check or hosted zone. You can specify up to 10 keys.
	RemoveTagKeys []*string

	// The type of the resource.
	//
	//     * The resource type for health checks is
	// healthcheck.
	//
	//     * The resource type for hosted zones is hostedzone.
	//
	// This member is required.
	ResourceType types.TagResourceType

	// A complex type that contains a list of the tags that you want to add to the
	// specified health check or hosted zone and/or the tags that you want to edit
	// Value for. You can add a maximum of 10 tags to a health check or a hosted zone.
	AddTags []*types.Tag
}

A complex type that contains information about the tags that you want to add, edit, or delete.

type ChangeTagsForResourceOutput 

type ChangeTagsForResourceOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

Empty response for the request.

type Client 

type Client struct {
	// contains filtered or unexported fields
}

Amazon Route 53 is a highly available and scalable Domain Name System (DNS) web service.

func New 

func New(options Options, optFns ...func(*Options)) *Client

New returns an initialized Client based on the functional options. Provide additional functional options to further configure the behavior of the client, such as changing the client's endpoint or adding custom middleware behavior.

func NewFromConfig 

func NewFromConfig(cfg aws.Config, optFns ...func(*Options)) *Client

NewFromConfig returns a new client from the provided config.

func (*Client) AssociateVPCWithHostedZone 

func (c *Client) AssociateVPCWithHostedZone(ctx context.Context, params *AssociateVPCWithHostedZoneInput, optFns ...func(*Options)) (*AssociateVPCWithHostedZoneOutput, error)

Associates an Amazon VPC with a private hosted zone. <note> <p>To perform the association, the VPC and the private hosted zone must already exist. Also, you can't convert a public hosted zone into a private hosted zone.</p> </note> <p>If you want to associate a VPC that was created by one AWS account with a private hosted zone that was created by a different account, do one of the following:</p> <ul> <li> <p>Use the AWS account that created the private hosted zone to submit a <a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_CreateVPCAssociationAuthorization.html">CreateVPCAssociationAuthorization</a> request. Then use the account that created the VPC to submit an <code>AssociateVPCWithHostedZone</code> request.</p> </li> <li> <p>If a subnet in the VPC was shared with another account, you can use the account that the subnet was shared with to submit an <code>AssociateVPCWithHostedZone</code> request. For more information about sharing subnets, see <a href="https://docs.aws.amazon.com/vpc/latest/userguide/vpc-sharing.html">Working with Shared VPCs</a>.</p> </li> </ul>

func (*Client) ChangeResourceRecordSets 

func (c *Client) ChangeResourceRecordSets(ctx context.Context, params *ChangeResourceRecordSetsInput, optFns ...func(*Options)) (*ChangeResourceRecordSetsOutput, error)

Creates, changes, or deletes a resource record set, which contains authoritative DNS information for a specified domain name or subdomain name. For example, you can use ChangeResourceRecordSets to create a resource record set that routes traffic for test.example.com to a web server that has an IP address of 192.0.2.44. <p> <b>Deleting Resource Record Sets</b> </p> <p>To delete a resource record set, you must specify all the same values that you specified when you created it.</p> <p> <b>Change Batches and Transactional Changes</b> </p> <p>The request body must include a document with a <code>ChangeResourceRecordSetsRequest</code> element. The request body contains a list of change items, known as a change batch. Change batches are considered transactional changes. Route 53 validates the changes in the request and then either makes all or none of the changes in the change batch request. This ensures that DNS routing isn't adversely affected by partial changes to the resource record sets in a hosted zone. </p> <p>For example, suppose a change batch request contains two changes: it deletes the <code>CNAME</code> resource record set for www.example.com and creates an alias resource record set for www.example.com. If validation for both records succeeds, Route 53 deletes the first resource record set and creates the second resource record set in a single operation. If validation for either the <code>DELETE</code> or the <code>CREATE</code> action fails, then the request is canceled, and the original <code>CNAME</code> record continues to exist.</p> <note> <p>If you try to delete the same resource record set more than once in a single change batch, Route 53 returns an <code>InvalidChangeBatch</code> error.</p> </note> <p> <b>Traffic Flow</b> </p> <p>To create resource record sets for complex routing configurations, use either the traffic flow visual editor in the Route 53 console or the API actions for traffic policies and traffic policy instances. Save the configuration as a traffic policy, then associate the traffic policy with one or more domain names (such as example.com) or subdomain names (such as www.example.com), in the same hosted zone or in multiple hosted zones. You can roll back the updates if the new configuration isn't performing as expected. For more information, see <a href="https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/traffic-flow.html">Using Traffic Flow to Route DNS Traffic</a> in the <i>Amazon Route 53 Developer Guide</i>.</p> <p> <b>Create, Delete, and Upsert</b> </p> <p>Use <code>ChangeResourceRecordsSetsRequest</code> to perform the following actions:</p> <ul> <li> <p> <code>CREATE</code>: Creates a resource record set that has the specified values.</p> </li> <li> <p> <code>DELETE</code>: Deletes an existing resource record set that has the specified values.</p> </li> <li> <p> <code>UPSERT</code>: If a resource record set does not already exist, AWS creates it. If a resource set does exist, Route 53 updates it with the values in the request. </p> </li> </ul> <p> <b>Syntaxes for Creating, Updating, and Deleting Resource Record Sets</b> </p> <p>The syntax for a request depends on the type of resource record set that you want to create, delete, or update, such as weighted, alias, or failover. The XML elements in your request must appear in the order listed in the syntax. </p> <p>For an example for each type of resource record set, see "Examples."</p> <p>Don't refer to the syntax in the "Parameter Syntax" section, which includes all of the elements for every kind of resource record set that you can create, delete, or update by using <code>ChangeResourceRecordSets</code>. </p> <p> <b>Change Propagation to Route 53 DNS Servers</b> </p> <p>When you submit a <code>ChangeResourceRecordSets</code> request, Route 53 propagates your changes to all of the Route 53 authoritative DNS servers. While your changes are propagating, <code>GetChange</code> returns a status of <code>PENDING</code>. When propagation is complete, <code>GetChange</code> returns a status of <code>INSYNC</code>. Changes generally propagate to all Route 53 name servers within 60 seconds. For more information, see <a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_GetChange.html">GetChange</a>.</p> <p> <b>Limits on ChangeResourceRecordSets Requests</b> </p> <p>For information about the limits on a <code>ChangeResourceRecordSets</code> request, see <a href="https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DNSLimitations.html">Limits</a> in the <i>Amazon Route 53 Developer Guide</i>.</p>

func (*Client) ChangeTagsForResource 

func (c *Client) ChangeTagsForResource(ctx context.Context, params *ChangeTagsForResourceInput, optFns ...func(*Options)) (*ChangeTagsForResourceOutput, error)

Adds, edits, or deletes tags for a health check or a hosted zone. For information about using tags for cost allocation, see Using Cost Allocation Tags (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html) in the AWS Billing and Cost Management User Guide.

func (*Client) CreateHealthCheck 

func (c *Client) CreateHealthCheck(ctx context.Context, params *CreateHealthCheckInput, optFns ...func(*Options)) (*CreateHealthCheckOutput, error)

Creates a new health check. For information about adding health checks to resource record sets, see HealthCheckId (https://docs.aws.amazon.com/Route53/latest/APIReference/API_ResourceRecordSet.html#Route53-Type-ResourceRecordSet-HealthCheckId) in ChangeResourceRecordSets (https://docs.aws.amazon.com/Route53/latest/APIReference/API_ChangeResourceRecordSets.html). <p> <b>ELB Load Balancers</b> </p> <p>If you're registering EC2 instances with an Elastic Load Balancing (ELB) load balancer, do not create Amazon Route 53 health checks for the EC2 instances. When you register an EC2 instance with a load balancer, you configure settings for an ELB health check, which performs a similar function to a Route 53 health check.</p> <p> <b>Private Hosted Zones</b> </p> <p>You can associate health checks with failover resource record sets in a private hosted zone. Note the following:</p> <ul> <li> <p>Route 53 health checkers are outside the VPC. To check the health of an endpoint within a VPC by IP address, you must assign a public IP address to the instance in the VPC.</p> </li> <li> <p>You can configure a health checker to check the health of an external resource that the instance relies on, such as a database server.</p> </li> <li> <p>You can create a CloudWatch metric, associate an alarm with the metric, and then create a health check that is based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the Amazon EC2 <code>StatusCheckFailed</code> metric, add an alarm to the metric, and then create a health check that is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the CloudWatch console, see the <a href="https://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/WhatIsCloudWatch.html">Amazon CloudWatch User Guide</a>.</p> </li> </ul>

func (*Client) CreateHostedZone 

func (c *Client) CreateHostedZone(ctx context.Context, params *CreateHostedZoneInput, optFns ...func(*Options)) (*CreateHostedZoneOutput, error)

Creates a new public or private hosted zone. You create records in a public hosted zone to define how you want to route traffic on the internet for a domain, such as example.com, and its subdomains (apex.example.com, acme.example.com). You create records in a private hosted zone to define how you want to route traffic for a domain and its subdomains within one or more Amazon Virtual Private Clouds (Amazon VPCs). You can't convert a public hosted zone to a private hosted zone or vice versa. Instead, you must create a new hosted zone with the same name and create new resource record sets. For more information about charges for hosted zones, see Amazon Route 53 Pricing (http://aws.amazon.com/route53/pricing/). Note the following:

  • You can't

create a hosted zone for a top-level domain (TLD) such as .com.

  • For

public hosted zones, Route 53 automatically creates a default SOA record and four NS records for the zone. For more information about SOA and NS records, see NS and SOA Records that Route 53 Creates for a Hosted Zone (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/SOA-NSrecords.html) in the Amazon Route 53 Developer Guide. If you want to use the same name servers for multiple public hosted zones, you can optionally associate a reusable delegation set with the hosted zone. See the DelegationSetId element.

  • If

your domain is registered with a registrar other than Route 53, you must update the name servers with your registrar to make Route 53 the DNS service for the domain. For more information, see Migrating DNS Service for an Existing Domain to Amazon Route 53 (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/MigratingDNS.html) in the Amazon Route 53 Developer Guide.

When you submit a CreateHostedZone request, the initial status of the hosted zone is PENDING. For public hosted zones, this means that the NS and SOA records are not yet available on all Route 53 DNS servers. When the NS and SOA records are available, the status of the zone changes to INSYNC.

func (*Client) CreateQueryLoggingConfig 

func (c *Client) CreateQueryLoggingConfig(ctx context.Context, params *CreateQueryLoggingConfigInput, optFns ...func(*Options)) (*CreateQueryLoggingConfigOutput, error)

Creates a configuration for DNS query logging. After you create a query logging configuration, Amazon Route 53 begins to publish log data to an Amazon CloudWatch Logs log group. DNS query logs contain information about the queries that Route 53 receives for a specified public hosted zone, such as the following:

  • Route 53 edge location that responded to the DNS query

    *

Domain or subdomain that was requested

  • DNS record type, such as A or

AAAA

  • DNS response code, such as NoError or ServFail

    <dl> <dt>Log

Group and Resource Policy</dt> <dd> <p>Before you create a query logging configuration, perform the following operations.</p> <note> <p>If you create a query logging configuration using the Route 53 console, Route 53 performs these operations automatically.</p> </note> <ol> <li> <p>Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging configuration. Note the following:</p> <ul> <li> <p>You must create the log group in the us-east-1 region.</p> </li> <li> <p>You must use the same AWS account to create the log group and the hosted zone that you want to configure query logging for.</p> </li> <li> <p>When you create log groups for query logging, we recommend that you use a consistent prefix, for example:</p> <p> <code>/aws/route53/<i>hosted zone name</i> </code> </p> <p>In the next step, you'll create a resource policy, which controls access to one or more log groups and the associated AWS resources, such as Route 53 hosted zones. There's a limit on the number of resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same resource policy for all the log groups that you create for query logging.</p> </li> </ul> </li> <li> <p>Create a CloudWatch Logs resource policy, and give it the permissions that Route 53 needs to create log streams and to send query logs to log streams. For the value of <code>Resource</code>, specify the ARN for the log group that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups that you created for query logging configurations, replace the hosted zone name with <code>*</code>, for example:</p> <p> <code>arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/*</code> </p> <note> <p>You can't use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of the AWS SDKs, or the AWS CLI.</p> </note> </li> </ol> </dd> <dt>Log Streams and Edge Locations</dt> <dd> <p>When Route 53 finishes creating the configuration for DNS query logging, it does the following:</p> <ul> <li> <p>Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the specified hosted zone. That log stream is used to log all queries that Route 53 responds to for that edge location.</p> </li> <li> <p>Begins to send query logs to the applicable log stream.</p> </li> </ul> <p>The name of each log stream is in the following format:</p> <p> <code> <i>hosted zone ID</i>/<i>edge location code</i> </code> </p> <p>The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The three-letter code typically corresponds with the International Air Transport Association airport code for an airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations, see "The Route 53 Global Network" on the <a href="http://aws.amazon.com/route53/details/">Route 53 Product Details</a> page.</p> </dd> <dt>Queries That Are Logged</dt> <dd> <p>Query logs contain only the queries that DNS resolvers forward to Route 53. If a DNS resolver has already cached the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue to return the cached response. It doesn't forward another query to Route 53 until the TTL for the corresponding resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and depending on the TTL for that resource record set, query logs might contain information about only one query out of every several thousand queries that are submitted to DNS. For more information about how DNS works, see <a href="https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/welcome-dns-service.html">Routing Internet Traffic to Your Website or Web Application</a> in the <i>Amazon Route 53 Developer Guide</i>.</p> </dd> <dt>Log File Format</dt> <dd> <p>For a list of the values in each query log and the format of each value, see <a href="https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html">Logging DNS Queries</a> in the <i>Amazon Route 53 Developer Guide</i>.</p> </dd> <dt>Pricing</dt> <dd> <p>For information about charges for query logs, see <a href="http://aws.amazon.com/cloudwatch/pricing/">Amazon CloudWatch Pricing</a>.</p> </dd> <dt>How to Stop Logging</dt> <dd> <p>If you want Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For more information, see <a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_DeleteQueryLoggingConfig.html">DeleteQueryLoggingConfig</a>.</p> </dd> </dl>

func (*Client) CreateReusableDelegationSet 

func (c *Client) CreateReusableDelegationSet(ctx context.Context, params *CreateReusableDelegationSetInput, optFns ...func(*Options)) (*CreateReusableDelegationSetOutput, error)

Creates a delegation set (a group of four name servers) that can be reused by multiple hosted zones that were created by the same AWS account. You can also create a reusable delegation set that uses the four name servers that are associated with an existing hosted zone. Specify the hosted zone ID in the CreateReusableDelegationSet request. You can't associate a reusable delegation set with a private hosted zone. For information about using a reusable delegation set to configure white label name servers, see Configuring White Label Name Servers (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/white-label-name-servers.html). <p>The process for migrating existing hosted zones to use a reusable delegation set is comparable to the process for configuring white label name servers. You need to perform the following steps:</p> <ol> <li> <p>Create a reusable delegation set.</p> </li> <li> <p>Recreate hosted zones, and reduce the TTL to 60 seconds or less.</p> </li> <li> <p>Recreate resource record sets in the new hosted zones.</p> </li> <li> <p>Change the registrar's name servers to use the name servers for the new hosted zones.</p> </li> <li> <p>Monitor traffic for the website or application.</p> </li> <li> <p>Change TTLs back to their original values.</p> </li> </ol> <p>If you want to migrate existing hosted zones to use a reusable delegation set, the existing hosted zones can't use any of the name servers that are assigned to the reusable delegation set. If one or more hosted zones do use one or more name servers that are assigned to the reusable delegation set, you can do one of the following:</p> <ul> <li> <p>For small numbers of hosted zones—up to a few hundred—it's relatively easy to create reusable delegation sets until you get one that has four name servers that don't overlap with any of the name servers in your hosted zones.</p> </li> <li> <p>For larger numbers of hosted zones, the easiest solution is to use more than one reusable delegation set.</p> </li> <li> <p>For larger numbers of hosted zones, you can also migrate hosted zones that have overlapping name servers to hosted zones that don't have overlapping name servers, then migrate the hosted zones again to use the reusable delegation set.</p> </li> </ul>

func (*Client) CreateTrafficPolicy 

func (c *Client) CreateTrafficPolicy(ctx context.Context, params *CreateTrafficPolicyInput, optFns ...func(*Options)) (*CreateTrafficPolicyOutput, error)

Creates a traffic policy, which you use to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com).

func (*Client) CreateTrafficPolicyInstance 

func (c *Client) CreateTrafficPolicyInstance(ctx context.Context, params *CreateTrafficPolicyInstanceInput, optFns ...func(*Options)) (*CreateTrafficPolicyInstanceOutput, error)

Creates resource record sets in a specified hosted zone based on the settings in a specified traffic policy version. In addition, CreateTrafficPolicyInstance associates the resource record sets with a specified domain name (such as example.com) or subdomain name (such as www.example.com). Amazon Route 53 responds to DNS queries for the domain or subdomain name by using the resource record sets that CreateTrafficPolicyInstance created.

func (*Client) CreateTrafficPolicyVersion 

func (c *Client) CreateTrafficPolicyVersion(ctx context.Context, params *CreateTrafficPolicyVersionInput, optFns ...func(*Options)) (*CreateTrafficPolicyVersionOutput, error)

Creates a new version of an existing traffic policy. When you create a new version of a traffic policy, you specify the ID of the traffic policy that you want to update and a JSON-formatted document that describes the new version. You use traffic policies to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com). You can create a maximum of 1000 versions of a traffic policy. If you reach the limit and need to create another version, you'll need to start a new traffic policy.

func (*Client) CreateVPCAssociationAuthorization 

func (c *Client) CreateVPCAssociationAuthorization(ctx context.Context, params *CreateVPCAssociationAuthorizationInput, optFns ...func(*Options)) (*CreateVPCAssociationAuthorizationOutput, error)

Authorizes the AWS account that created a specified VPC to submit an AssociateVPCWithHostedZone request to associate the VPC with a specified hosted zone that was created by a different account. To submit a CreateVPCAssociationAuthorization request, you must use the account that created the hosted zone. After you authorize the association, use the account that created the VPC to submit an AssociateVPCWithHostedZone request. If you want to associate multiple VPCs that you created by using one account with a hosted zone that you created by using a different account, you must submit one authorization request for each VPC.

func (*Client) DeleteHealthCheck 

func (c *Client) DeleteHealthCheck(ctx context.Context, params *DeleteHealthCheckInput, optFns ...func(*Options)) (*DeleteHealthCheckOutput, error)

Deletes a health check. Amazon Route 53 does not prevent you from deleting a health check even if the health check is associated with one or more resource record sets. If you delete a health check and you don't update the associated resource record sets, the future status of the health check can't be predicted and may change. This will affect the routing of DNS queries for your DNS failover configuration. For more information, see Replacing and Deleting Health Checks (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-creating-deleting.html#health-checks-deleting.html) in the Amazon Route 53 Developer Guide. <p>If you're using AWS Cloud Map and you configured Cloud Map to create a Route 53 health check when you register an instance, you can't use the Route 53 <code>DeleteHealthCheck</code> command to delete the health check. The health check is deleted automatically when you deregister the instance; there can be a delay of several hours before the health check is deleted from Route 53. </p>

func (*Client) DeleteHostedZone 

func (c *Client) DeleteHostedZone(ctx context.Context, params *DeleteHostedZoneInput, optFns ...func(*Options)) (*DeleteHostedZoneOutput, error)

Deletes a hosted zone. <p>If the hosted zone was created by another service, such as AWS Cloud Map, see <a href="https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DeleteHostedZone.html#delete-public-hosted-zone-created-by-another-service">Deleting Public Hosted Zones That Were Created by Another Service</a> in the <i>Amazon Route 53 Developer Guide</i> for information about how to delete it. (The process is the same for public and private hosted zones that were created by another service.)</p> <p>If you want to keep your domain registration but you want to stop routing internet traffic to your website or web application, we recommend that you delete resource record sets in the hosted zone instead of deleting the hosted zone.</p> <important> <p>If you delete a hosted zone, you can't undelete it. You must create a new hosted zone and update the name servers for your domain registration, which can require up to 48 hours to take effect. (If you delegated responsibility for a subdomain to a hosted zone and you delete the child hosted zone, you must update the name servers in the parent hosted zone.) In addition, if you delete a hosted zone, someone could hijack the domain and route traffic to their own resources using your domain name.</p> </important> <p>If you want to avoid the monthly charge for the hosted zone, you can transfer DNS service for the domain to a free DNS service. When you transfer DNS service, you have to update the name servers for the domain registration. If the domain is registered with Route 53, see <a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_domains_UpdateDomainNameservers.html">UpdateDomainNameservers</a> for information about how to replace Route 53 name servers with name servers for the new DNS service. If the domain is registered with another registrar, use the method provided by the registrar to update name servers for the domain registration. For more information, perform an internet search on "free DNS service."</p> <p>You can delete a hosted zone only if it contains only the default SOA record and NS resource record sets. If the hosted zone contains other resource record sets, you must delete them before you can delete the hosted zone. If you try to delete a hosted zone that contains other resource record sets, the request fails, and Route 53 returns a <code>HostedZoneNotEmpty</code> error. For information about deleting records from your hosted zone, see <a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_ChangeResourceRecordSets.html">ChangeResourceRecordSets</a>.</p> <p>To verify that the hosted zone has been deleted, do one of the following:</p> <ul> <li> <p>Use the <code>GetHostedZone</code> action to request information about the hosted zone.</p> </li> <li> <p>Use the <code>ListHostedZones</code> action to get a list of the hosted zones associated with the current AWS account.</p> </li> </ul>

func (*Client) DeleteQueryLoggingConfig 

func (c *Client) DeleteQueryLoggingConfig(ctx context.Context, params *DeleteQueryLoggingConfigInput, optFns ...func(*Options)) (*DeleteQueryLoggingConfigOutput, error)

Deletes a configuration for DNS query logging. If you delete a configuration, Amazon Route 53 stops sending query logs to CloudWatch Logs. Route 53 doesn't delete any logs that are already in CloudWatch Logs. <p>For more information about DNS query logs, see <a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_CreateQueryLoggingConfig.html">CreateQueryLoggingConfig</a>.</p>

func (*Client) DeleteReusableDelegationSet 

func (c *Client) DeleteReusableDelegationSet(ctx context.Context, params *DeleteReusableDelegationSetInput, optFns ...func(*Options)) (*DeleteReusableDelegationSetOutput, error)

Deletes a reusable delegation set. You can delete a reusable delegation set only if it isn't associated with any hosted zones. To verify that the reusable delegation set is not associated with any hosted zones, submit a GetReusableDelegationSet (https://docs.aws.amazon.com/Route53/latest/APIReference/API_GetReusableDelegationSet.html) request and specify the ID of the reusable delegation set that you want to delete.

func (*Client) DeleteTrafficPolicy 

func (c *Client) DeleteTrafficPolicy(ctx context.Context, params *DeleteTrafficPolicyInput, optFns ...func(*Options)) (*DeleteTrafficPolicyOutput, error)

Deletes a traffic policy.

func (*Client) DeleteTrafficPolicyInstance 

func (c *Client) DeleteTrafficPolicyInstance(ctx context.Context, params *DeleteTrafficPolicyInstanceInput, optFns ...func(*Options)) (*DeleteTrafficPolicyInstanceOutput, error)

Deletes a traffic policy instance and all of the resource record sets that Amazon Route 53 created when you created the instance. In the Route 53 console, traffic policy instances are known as policy records.

func (*Client) DeleteVPCAssociationAuthorization 

func (c *Client) DeleteVPCAssociationAuthorization(ctx context.Context, params *DeleteVPCAssociationAuthorizationInput, optFns ...func(*Options)) (*DeleteVPCAssociationAuthorizationOutput, error)

Removes authorization to submit an AssociateVPCWithHostedZone request to associate a specified VPC with a hosted zone that was created by a different account. You must use the account that created the hosted zone to submit a DeleteVPCAssociationAuthorization request. Sending this request only prevents the AWS account that created the VPC from associating the VPC with the Amazon Route 53 hosted zone in the future. If the VPC is already associated with the hosted zone, DeleteVPCAssociationAuthorization won't disassociate the VPC from the hosted zone. If you want to delete an existing association, use DisassociateVPCFromHostedZone.

func (*Client) DisassociateVPCFromHostedZone 

func (c *Client) DisassociateVPCFromHostedZone(ctx context.Context, params *DisassociateVPCFromHostedZoneInput, optFns ...func(*Options)) (*DisassociateVPCFromHostedZoneOutput, error)

Disassociates an Amazon Virtual Private Cloud (Amazon VPC) from an Amazon Route 53 private hosted zone. Note the following:

  • You can't disassociate the

last Amazon VPC from a private hosted zone.

  • You can't convert a private

hosted zone into a public hosted zone.

  • You can submit a

DisassociateVPCFromHostedZone request using either the account that created the hosted zone or the account that created the Amazon VPC.

  • Some services,

such as AWS Cloud Map and Amazon Elastic File System (Amazon EFS) automatically create hosted zones and associate VPCs with the hosted zones. A service can create a hosted zone using your account or using its own account. You can disassociate a VPC from a hosted zone only if the service created the hosted zone using your account. When you run DisassociateVPCFromHostedZone (https://docs.aws.amazon.com/Route53/latest/APIReference/API_ListHostedZonesByVPC.html), if the hosted zone has a value for OwningAccount, you can use DisassociateVPCFromHostedZone. If the hosted zone has a value for OwningService, you can't use DisassociateVPCFromHostedZone.

func (*Client) GetAccountLimit 

func (c *Client) GetAccountLimit(ctx context.Context, params *GetAccountLimitInput, optFns ...func(*Options)) (*GetAccountLimitOutput, error)

Gets the specified limit for the current account, for example, the maximum number of health checks that you can create using the account. For the default limit, see Limits (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DNSLimitations.html) in the Amazon Route 53 Developer Guide. To request a higher limit, open a case (https://console.aws.amazon.com/support/home#/case/create?issueType=service-limit-increase&limitType=service-code-route53). You can also view account limits in AWS Trusted Advisor. Sign in to the AWS Management Console and open the Trusted Advisor console at https://console.aws.amazon.com/trustedadvisor/ (https://console.aws.amazon.com/trustedadvisor). Then choose Service limits in the navigation pane.

func (*Client) GetChange 

func (c *Client) GetChange(ctx context.Context, params *GetChangeInput, optFns ...func(*Options)) (*GetChangeOutput, error)

Returns the current status of a change batch request. The status is one of the following values:

  • PENDING indicates that the changes in this request have

not propagated to all Amazon Route 53 DNS servers. This is the initial status of all change batch requests.

  • INSYNC indicates that the changes have

propagated to all Route 53 DNS servers.

func (*Client) GetCheckerIpRanges 

func (c *Client) GetCheckerIpRanges(ctx context.Context, params *GetCheckerIpRangesInput, optFns ...func(*Options)) (*GetCheckerIpRangesOutput, error)

GetCheckerIpRanges still works, but we recommend that you download ip-ranges.json, which includes IP address ranges for all AWS services. For more information, see IP Address Ranges of Amazon Route 53 Servers (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/route-53-ip-addresses.html) in the Amazon Route 53 Developer Guide.

func (*Client) GetGeoLocation 

func (c *Client) GetGeoLocation(ctx context.Context, params *GetGeoLocationInput, optFns ...func(*Options)) (*GetGeoLocationOutput, error)

Gets information about whether a specified geographic location is supported for Amazon Route 53 geolocation resource record sets. <p>Use the following syntax to determine whether a continent is supported for geolocation:</p> <p> <code>GET /2013-04-01/geolocation?continentcode=<i>two-letter abbreviation for a continent</i> </code> </p> <p>Use the following syntax to determine whether a country is supported for geolocation:</p> <p> <code>GET /2013-04-01/geolocation?countrycode=<i>two-character country code</i> </code> </p> <p>Use the following syntax to determine whether a subdivision of a country is supported for geolocation:</p> <p> <code>GET /2013-04-01/geolocation?countrycode=<i>two-character country code</i>&subdivisioncode=<i>subdivision code</i> </code> </p>

func (*Client) GetHealthCheck 

func (c *Client) GetHealthCheck(ctx context.Context, params *GetHealthCheckInput, optFns ...func(*Options)) (*GetHealthCheckOutput, error)

Gets information about a specified health check.

func (*Client) GetHealthCheckCount 

func (c *Client) GetHealthCheckCount(ctx context.Context, params *GetHealthCheckCountInput, optFns ...func(*Options)) (*GetHealthCheckCountOutput, error)

Retrieves the number of health checks that are associated with the current AWS account.

func (*Client) GetHealthCheckLastFailureReason 

func (c *Client) GetHealthCheckLastFailureReason(ctx context.Context, params *GetHealthCheckLastFailureReasonInput, optFns ...func(*Options)) (*GetHealthCheckLastFailureReasonOutput, error)

Gets the reason that a specified health check failed most recently.

func (*Client) GetHealthCheckStatus 

func (c *Client) GetHealthCheckStatus(ctx context.Context, params *GetHealthCheckStatusInput, optFns ...func(*Options)) (*GetHealthCheckStatusOutput, error)

Gets status of a specified health check.

func (*Client) GetHostedZone 

func (c *Client) GetHostedZone(ctx context.Context, params *GetHostedZoneInput, optFns ...func(*Options)) (*GetHostedZoneOutput, error)

Gets information about a specified hosted zone including the four name servers assigned to the hosted zone.

func (*Client) GetHostedZoneCount 

func (c *Client) GetHostedZoneCount(ctx context.Context, params *GetHostedZoneCountInput, optFns ...func(*Options)) (*GetHostedZoneCountOutput, error)

Retrieves the number of hosted zones that are associated with the current AWS account.

func (*Client) GetHostedZoneLimit 

func (c *Client) GetHostedZoneLimit(ctx context.Context, params *GetHostedZoneLimitInput, optFns ...func(*Options)) (*GetHostedZoneLimitOutput, error)

Gets the specified limit for a specified hosted zone, for example, the maximum number of records that you can create in the hosted zone. For the default limit, see Limits (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DNSLimitations.html) in the Amazon Route 53 Developer Guide. To request a higher limit, open a case (https://console.aws.amazon.com/support/home#/case/create?issueType=service-limit-increase&limitType=service-code-route53).

func (*Client) GetQueryLoggingConfig 

func (c *Client) GetQueryLoggingConfig(ctx context.Context, params *GetQueryLoggingConfigInput, optFns ...func(*Options)) (*GetQueryLoggingConfigOutput, error)

Gets information about a specified configuration for DNS query logging. <p>For more information about DNS query logs, see <a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_CreateQueryLoggingConfig.html">CreateQueryLoggingConfig</a> and <a href="https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html">Logging DNS Queries</a>.</p>

func (*Client) GetReusableDelegationSet 

func (c *Client) GetReusableDelegationSet(ctx context.Context, params *GetReusableDelegationSetInput, optFns ...func(*Options)) (*GetReusableDelegationSetOutput, error)

Retrieves information about a specified reusable delegation set, including the four name servers that are assigned to the delegation set.

func (*Client) GetReusableDelegationSetLimit 

func (c *Client) GetReusableDelegationSetLimit(ctx context.Context, params *GetReusableDelegationSetLimitInput, optFns ...func(*Options)) (*GetReusableDelegationSetLimitOutput, error)

Gets the maximum number of hosted zones that you can associate with the specified reusable delegation set. For the default limit, see Limits (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DNSLimitations.html) in the Amazon Route 53 Developer Guide. To request a higher limit, open a case (https://console.aws.amazon.com/support/home#/case/create?issueType=service-limit-increase&limitType=service-code-route53).

func (*Client) GetTrafficPolicy 

func (c *Client) GetTrafficPolicy(ctx context.Context, params *GetTrafficPolicyInput, optFns ...func(*Options)) (*GetTrafficPolicyOutput, error)

Gets information about a specific traffic policy version.

func (*Client) GetTrafficPolicyInstance 

func (c *Client) GetTrafficPolicyInstance(ctx context.Context, params *GetTrafficPolicyInstanceInput, optFns ...func(*Options)) (*GetTrafficPolicyInstanceOutput, error)

Gets information about a specified traffic policy instance. After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element. In the Route 53 console, traffic policy instances are known as policy records.

func (*Client) GetTrafficPolicyInstanceCount 

func (c *Client) GetTrafficPolicyInstanceCount(ctx context.Context, params *GetTrafficPolicyInstanceCountInput, optFns ...func(*Options)) (*GetTrafficPolicyInstanceCountOutput, error)

Gets the number of traffic policy instances that are associated with the current AWS account.

func (*Client) ListGeoLocations 

func (c *Client) ListGeoLocations(ctx context.Context, params *ListGeoLocationsInput, optFns ...func(*Options)) (*ListGeoLocationsOutput, error)

Retrieves a list of supported geographic locations. Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order immediately after the corresponding country. For a list of supported geolocation codes, see the GeoLocation (https://docs.aws.amazon.com/Route53/latest/APIReference/API_GeoLocation.html) data type.

func (*Client) ListHealthChecks 

func (c *Client) ListHealthChecks(ctx context.Context, params *ListHealthChecksInput, optFns ...func(*Options)) (*ListHealthChecksOutput, error)

Retrieve a list of the health checks that are associated with the current AWS account.

func (*Client) ListHostedZones 

func (c *Client) ListHostedZones(ctx context.Context, params *ListHostedZonesInput, optFns ...func(*Options)) (*ListHostedZonesOutput, error)

Retrieves a list of the public and private hosted zones that are associated with the current AWS account. The response includes a HostedZones child element for each hosted zone. Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use the maxitems parameter to list them in groups of up to 100.

func (*Client) ListHostedZonesByName 

func (c *Client) ListHostedZonesByName(ctx context.Context, params *ListHostedZonesByNameInput, optFns ...func(*Options)) (*ListHostedZonesByNameOutput, error)

Retrieves a list of your hosted zones in lexicographic order. The response includes a HostedZones child element for each hosted zone created by the current AWS account. ListHostedZonesByName sorts hosted zones by name with the labels reversed. For example: <p> <code>com.example.www.</code> </p> <p>Note the trailing dot, which can change the sort order in some circumstances.</p> <p>If the domain name includes escape characters or Punycode, <code>ListHostedZonesByName</code> alphabetizes the domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database. For example, to create a hosted zone for exämple.com, you specify ex\344mple.com for the domain name. <code>ListHostedZonesByName</code> alphabetizes it as:</p> <p> <code>com.ex\344mple.</code> </p> <p>The labels are reversed and alphabetized using the escaped value. For more information about valid domain name formats, including internationalized domain names, see <a href="https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html">DNS Domain Name Format</a> in the <i>Amazon Route 53 Developer Guide</i>.</p> <p>Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, use the <code>MaxItems</code> parameter to list them in groups of up to 100. The response includes values that help navigate from one group of <code>MaxItems</code> hosted zones to the next:</p> <ul> <li> <p>The <code>DNSName</code> and <code>HostedZoneId</code> elements in the response contain the values, if any, specified for the <code>dnsname</code> and <code>hostedzoneid</code> parameters in the request that produced the current response.</p> </li> <li> <p>The <code>MaxItems</code> element in the response contains the value, if any, that you specified for the <code>maxitems</code> parameter in the request that produced the current response.</p> </li> <li> <p>If the value of <code>IsTruncated</code> in the response is true, there are more hosted zones associated with the current AWS account. </p> <p>If <code>IsTruncated</code> is false, this response includes the last hosted zone that is associated with the current account. The <code>NextDNSName</code> element and <code>NextHostedZoneId</code> elements are omitted from the response.</p> </li> <li> <p>The <code>NextDNSName</code> and <code>NextHostedZoneId</code> elements in the response contain the domain name and the hosted zone ID of the next hosted zone that is associated with the current AWS account. If you want to list more hosted zones, make another call to <code>ListHostedZonesByName</code>, and specify the value of <code>NextDNSName</code> and <code>NextHostedZoneId</code> in the <code>dnsname</code> and <code>hostedzoneid</code> parameters, respectively.</p> </li> </ul>

func (*Client) ListHostedZonesByVPC 

func (c *Client) ListHostedZonesByVPC(ctx context.Context, params *ListHostedZonesByVPCInput, optFns ...func(*Options)) (*ListHostedZonesByVPCOutput, error)

Lists all the private hosted zones that a specified VPC is associated with, regardless of which AWS account or AWS service owns the hosted zones. The HostedZoneOwner structure in the response contains one of the following values:

  • An OwningAccount element, which contains the account number of

either the current AWS account or another AWS account. Some services, such as AWS Cloud Map, create hosted zones using the current account.

  • An

OwningService element, which identifies the AWS service that created and owns the hosted zone. For example, if a hosted zone was created by Amazon Elastic File System (Amazon EFS), the value of Owner is efs.amazonaws.com.

func (*Client) ListQueryLoggingConfigs 

func (c *Client) ListQueryLoggingConfigs(ctx context.Context, params *ListQueryLoggingConfigsInput, optFns ...func(*Options)) (*ListQueryLoggingConfigsOutput, error)

Lists the configurations for DNS query logging that are associated with the current AWS account or the configuration that is associated with a specified hosted zone. <p>For more information about DNS query logs, see <a href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_CreateQueryLoggingConfig.html">CreateQueryLoggingConfig</a>. Additional information, including the format of DNS query logs, appears in <a href="https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html">Logging DNS Queries</a> in the <i>Amazon Route 53 Developer Guide</i>.</p>

func (*Client) ListResourceRecordSets 

func (c *Client) ListResourceRecordSets(ctx context.Context, params *ListResourceRecordSetsInput, optFns ...func(*Options)) (*ListResourceRecordSetsOutput, error)

Lists the resource record sets in a specified hosted zone. ListResourceRecordSets returns up to 100 resource record sets at a time in ASCII order, beginning at a position specified by the name and type elements. <p> <b>Sort order</b> </p> <p> <code>ListResourceRecordSets</code> sorts results first by DNS name with the labels reversed, for example:</p> <p> <code>com.example.www.</code> </p> <p>Note the trailing dot, which can change the sort order when the record name contains characters that appear before <code>.</code> (decimal 46) in the ASCII table. These characters include the following: <code>! " # $ % & ' ( ) * + , -</code> </p> <p>When multiple records have the same DNS name, <code>ListResourceRecordSets</code> sorts results by the record type.</p> <p> <b>Specifying where to start listing records</b> </p> <p>You can use the name and type elements to specify the resource record set that the list begins with:</p> <dl> <dt>If you do not specify Name or Type</dt> <dd> <p>The results begin with the first resource record set that the hosted zone contains.</p> </dd> <dt>If you specify Name but not Type</dt> <dd> <p>The results begin with the first resource record set in the list whose name is greater than or equal to <code>Name</code>.</p> </dd> <dt>If you specify Type but not Name</dt> <dd> <p>Amazon Route 53 returns the <code>InvalidInput</code> error.</p> </dd> <dt>If you specify both Name and Type</dt> <dd> <p>The results begin with the first resource record set in the list whose name is greater than or equal to <code>Name</code>, and whose type is greater than or equal to <code>Type</code>.</p> </dd> </dl> <p> <b>Resource record sets that are PENDING</b> </p> <p>This action returns the most current version of the records. This includes records that are <code>PENDING</code>, and that are not yet available on all Route 53 DNS servers.</p> <p> <b>Changing resource record sets</b> </p> <p>To ensure that you get an accurate listing of the resource record sets for a hosted zone at a point in time, do not submit a <code>ChangeResourceRecordSets</code> request while you're paging through the results of a <code>ListResourceRecordSets</code> request. If you do, some pages may display results without the latest changes while other pages display results with the latest changes.</p> <p> <b>Displaying the next page of results</b> </p> <p>If a <code>ListResourceRecordSets</code> command returns more than one page of results, the value of <code>IsTruncated</code> is <code>true</code>. To display the next page of results, get the values of <code>NextRecordName</code>, <code>NextRecordType</code>, and <code>NextRecordIdentifier</code> (if any) from the response. Then submit another <code>ListResourceRecordSets</code> request, and specify those values for <code>StartRecordName</code>, <code>StartRecordType</code>, and <code>StartRecordIdentifier</code>.</p>

func (*Client) ListReusableDelegationSets 

func (c *Client) ListReusableDelegationSets(ctx context.Context, params *ListReusableDelegationSetsInput, optFns ...func(*Options)) (*ListReusableDelegationSetsOutput, error)

Retrieves a list of the reusable delegation sets that are associated with the current AWS account.

func (*Client) ListTagsForResource 

func (c *Client) ListTagsForResource(ctx context.Context, params *ListTagsForResourceInput, optFns ...func(*Options)) (*ListTagsForResourceOutput, error)

Lists tags for one health check or hosted zone. For information about using tags for cost allocation, see Using Cost Allocation Tags (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html) in the AWS Billing and Cost Management User Guide.

func (*Client) ListTagsForResources 

func (c *Client) ListTagsForResources(ctx context.Context, params *ListTagsForResourcesInput, optFns ...func(*Options)) (*ListTagsForResourcesOutput, error)

Lists tags for up to 10 health checks or hosted zones. For information about using tags for cost allocation, see Using Cost Allocation Tags (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html) in the AWS Billing and Cost Management User Guide.

func (*Client) ListTrafficPolicies 

func (c *Client) ListTrafficPolicies(ctx context.Context, params *ListTrafficPoliciesInput, optFns ...func(*Options)) (*ListTrafficPoliciesOutput, error)

Gets information about the latest version for every traffic policy that is associated with the current AWS account. Policies are listed in the order that they were created in.

func (*Client) ListTrafficPolicyInstances 

func (c *Client) ListTrafficPolicyInstances(ctx context.Context, params *ListTrafficPolicyInstancesInput, optFns ...func(*Options)) (*ListTrafficPolicyInstancesOutput, error)

Gets information about the traffic policy instances that you created by using the current AWS account. After you submit an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element. Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

func (*Client) ListTrafficPolicyInstancesByHostedZone 

func (c *Client) ListTrafficPolicyInstancesByHostedZone(ctx context.Context, params *ListTrafficPolicyInstancesByHostedZoneInput, optFns ...func(*Options)) (*ListTrafficPolicyInstancesByHostedZoneOutput, error)

Gets information about the traffic policy instances that you created in a specified hosted zone. After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element. Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

func (*Client) ListTrafficPolicyInstancesByPolicy 

func (c *Client) ListTrafficPolicyInstancesByPolicy(ctx context.Context, params *ListTrafficPolicyInstancesByPolicyInput, optFns ...func(*Options)) (*ListTrafficPolicyInstancesByPolicyOutput, error)

Gets information about the traffic policy instances that you created by using a specify traffic policy version. After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element. Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

func (*Client) ListTrafficPolicyVersions 

func (c *Client) ListTrafficPolicyVersions(ctx context.Context, params *ListTrafficPolicyVersionsInput, optFns ...func(*Options)) (*ListTrafficPolicyVersionsOutput, error)

Gets information about all of the versions for a specified traffic policy. Traffic policy versions are listed in numerical order by VersionNumber.

func (*Client) ListVPCAssociationAuthorizations 

func (c *Client) ListVPCAssociationAuthorizations(ctx context.Context, params *ListVPCAssociationAuthorizationsInput, optFns ...func(*Options)) (*ListVPCAssociationAuthorizationsOutput, error)

Gets a list of the VPCs that were created by other accounts and that can be associated with a specified hosted zone because you've submitted one or more CreateVPCAssociationAuthorization requests. The response includes a VPCs element with a VPC child element for each VPC that can be associated with the hosted zone.

func (*Client) TestDNSAnswer 

func (c *Client) TestDNSAnswer(ctx context.Context, params *TestDNSAnswerInput, optFns ...func(*Options)) (*TestDNSAnswerOutput, error)

Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet mask.

func (*Client) UpdateHealthCheck 

func (c *Client) UpdateHealthCheck(ctx context.Context, params *UpdateHealthCheckInput, optFns ...func(*Options)) (*UpdateHealthCheckOutput, error)

Updates an existing health check. Note that some values can't be updated. For more information about updating health checks, see Creating, Updating, and Deleting Health Checks (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-creating-deleting.html) in the Amazon Route 53 Developer Guide.

func (*Client) UpdateHostedZoneComment 

func (c *Client) UpdateHostedZoneComment(ctx context.Context, params *UpdateHostedZoneCommentInput, optFns ...func(*Options)) (*UpdateHostedZoneCommentOutput, error)

Updates the comment for a specified hosted zone.

func (*Client) UpdateTrafficPolicyComment 

func (c *Client) UpdateTrafficPolicyComment(ctx context.Context, params *UpdateTrafficPolicyCommentInput, optFns ...func(*Options)) (*UpdateTrafficPolicyCommentOutput, error)

Updates the comment for a specified traffic policy version.

func (*Client) UpdateTrafficPolicyInstance 

func (c *Client) UpdateTrafficPolicyInstance(ctx context.Context, params *UpdateTrafficPolicyInstanceInput, optFns ...func(*Options)) (*UpdateTrafficPolicyInstanceOutput, error)

Updates the resource record sets in a specified hosted zone that were created based on the settings in a specified traffic policy version. When you update a traffic policy instance, Amazon Route 53 continues to respond to DNS queries for the root resource record set name (such as example.com) while it replaces one group of resource record sets with another. Route 53 performs the following operations:

  • Route 53 creates a new group of resource record sets based on

the specified traffic policy. This is true regardless of how significant the differences are between the existing resource record sets and the new resource record sets.

  • When all of the new resource record sets have been created,

Route 53 starts to respond to DNS queries for the root resource record set name (such as example.com) by using the new resource record sets.

  • Route 53

deletes the old group of resource record sets that are associated with the root resource record set name.

type CreateHealthCheckInput 

type CreateHealthCheckInput struct {

	// A complex type that contains settings for a new health check.
	//
	// This member is required.
	HealthCheckConfig *types.HealthCheckConfig

	// A unique string that identifies the request and that allows you to retry a
	// failed CreateHealthCheck request without the risk of creating two identical
	// health checks:
	//
	//     * If you send a CreateHealthCheck request with the same
	// CallerReference and settings as a previous request, and if the health check
	// doesn't exist, Amazon Route 53 creates the health check. If the health check
	// does exist, Route 53 returns the settings for the existing health check.
	//
	//     *
	// If you send a CreateHealthCheck request with the same CallerReference as a
	// deleted health check, regardless of the settings, Route 53 returns a
	// HealthCheckAlreadyExists error.
	//
	//     * If you send a CreateHealthCheck request
	// with the same CallerReference as an existing health check but with different
	// settings, Route 53 returns a HealthCheckAlreadyExists error.
	//
	//     * If you send
	// a CreateHealthCheck request with a unique CallerReference but settings identical
	// to an existing health check, Route 53 creates the health check.
	//
	// This member is required.
	CallerReference *string
}

A complex type that contains the health check request information.

type CreateHealthCheckOutput 

type CreateHealthCheckOutput struct {

	// The unique URL representing the new health check.
	//
	// This member is required.
	Location *string

	// A complex type that contains identifying information about the health check.
	//
	// This member is required.
	HealthCheck *types.HealthCheck

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type containing the response information for the new health check.

type CreateHostedZoneInput 

type CreateHostedZoneInput struct {

	// A unique string that identifies the request and that allows failed
	// CreateHostedZone requests to be retried without the risk of executing the
	// operation twice. You must use a unique CallerReference string every time you
	// submit a CreateHostedZone request. CallerReference can be any unique string, for
	// example, a date/time stamp.
	//
	// This member is required.
	CallerReference *string

	// (Optional) A complex type that contains the following optional values:
	//
	//     *
	// For public and private hosted zones, an optional comment
	//
	//     * For private
	// hosted zones, an optional PrivateZone element
	//
	// If you don't specify a comment or
	// the PrivateZone element, omit HostedZoneConfig and the other elements.
	HostedZoneConfig *types.HostedZoneConfig

	// The name of the domain. Specify a fully qualified domain name, for example,
	// www.example.com. The trailing dot is optional; Amazon Route 53 assumes that the
	// domain name is fully qualified. This means that Route 53 treats www.example.com
	// (without a trailing dot) and www.example.com. (with a trailing dot) as
	// identical. If you're creating a public hosted zone, this is the name you have
	// registered with your DNS registrar. If your domain name is registered with a
	// registrar other than Route 53, change the name servers for your domain to the
	// set of NameServers that CreateHostedZone returns in DelegationSet.
	//
	// This member is required.
	Name *string

	// (Private hosted zones only) A complex type that contains information about the
	// Amazon VPC that you're associating with this hosted zone. You can specify only
	// one Amazon VPC when you create a private hosted zone. To associate additional
	// Amazon VPCs with the hosted zone, use AssociateVPCWithHostedZone
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_AssociateVPCWithHostedZone.html)
	// after you create a hosted zone.
	VPC *types.VPC

	// If you want to associate a reusable delegation set with this hosted zone, the ID
	// that Amazon Route 53 assigned to the reusable delegation set when you created
	// it. For more information about reusable delegation sets, see
	// CreateReusableDelegationSet
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_CreateReusableDelegationSet.html).
	DelegationSetId *string
}

A complex type that contains information about the request to create a public or private hosted zone.

type CreateHostedZoneOutput 

type CreateHostedZoneOutput struct {

	// A complex type that contains general information about the hosted zone.
	//
	// This member is required.
	HostedZone *types.HostedZone

	// A complex type that contains information about the CreateHostedZone request.
	//
	// This member is required.
	ChangeInfo *types.ChangeInfo

	// A complex type that contains information about an Amazon VPC that you associated
	// with this hosted zone.
	VPC *types.VPC

	// The unique URL representing the new hosted zone.
	//
	// This member is required.
	Location *string

	// A complex type that describes the name servers for this hosted zone.
	//
	// This member is required.
	DelegationSet *types.DelegationSet

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type containing the response information for the hosted zone.

type CreateQueryLoggingConfigInput 

type CreateQueryLoggingConfigInput struct {

	// The Amazon Resource Name (ARN) for the log group that you want to Amazon Route
	// 53 to send query logs to. This is the format of the ARN:
	// <p>arn:aws:logs:<i>region</i>:<i>account-id</i>:log-group:<i>log_group_name</i>
	// </p> <p>To get the ARN for a log group, you can use the CloudWatch console, the
	// <a
	// href="https://docs.aws.amazon.com/AmazonCloudWatchLogs/latest/APIReference/API_DescribeLogGroups.html">DescribeLogGroups</a>
	// API action, the <a
	// href="https://docs.aws.amazon.com/cli/latest/reference/logs/describe-log-groups.html">describe-log-groups</a>
	// command, or the applicable command in one of the AWS SDKs.</p>
	//
	// This member is required.
	CloudWatchLogsLogGroupArn *string

	// The ID of the hosted zone that you want to log queries for. You can log queries
	// only for public hosted zones.
	//
	// This member is required.
	HostedZoneId *string
}

type CreateQueryLoggingConfigOutput 

type CreateQueryLoggingConfigOutput struct {

	// A complex type that contains the ID for a query logging configuration, the ID of
	// the hosted zone that you want to log queries for, and the ARN for the log group
	// that you want Amazon Route 53 to send query logs to.
	//
	// This member is required.
	QueryLoggingConfig *types.QueryLoggingConfig

	// The unique URL representing the new query logging configuration.
	//
	// This member is required.
	Location *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

type CreateReusableDelegationSetInput 

type CreateReusableDelegationSetInput struct {

	// If you want to mark the delegation set for an existing hosted zone as reusable,
	// the ID for that hosted zone.
	HostedZoneId *string

	// A unique string that identifies the request, and that allows you to retry failed
	// CreateReusableDelegationSet requests without the risk of executing the operation
	// twice. You must use a unique CallerReference string every time you submit a
	// CreateReusableDelegationSet request. CallerReference can be any unique string,
	// for example a date/time stamp.
	//
	// This member is required.
	CallerReference *string
}

type CreateReusableDelegationSetOutput 

type CreateReusableDelegationSetOutput struct {

	// The unique URL representing the new reusable delegation set.
	//
	// This member is required.
	Location *string

	// A complex type that contains name server information.
	//
	// This member is required.
	DelegationSet *types.DelegationSet

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

type CreateTrafficPolicyInput 

type CreateTrafficPolicyInput struct {

	// The name of the traffic policy.
	//
	// This member is required.
	Name *string

	// The definition of this traffic policy in JSON format. For more information, see
	// Traffic Policy Document Format
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/api-policies-traffic-policy-document-format.html).
	//
	// This member is required.
	Document *string

	// (Optional) Any comments that you want to include about the traffic policy.
	Comment *string
}

A complex type that contains information about the traffic policy that you want to create.

type CreateTrafficPolicyInstanceInput 

type CreateTrafficPolicyInstanceInput struct {

	// The domain name (such as example.com) or subdomain name (such as
	// www.example.com) for which Amazon Route 53 responds to DNS queries by using the
	// resource record sets that Route 53 creates for this traffic policy instance.
	//
	// This member is required.
	Name *string

	// (Optional) The TTL that you want Amazon Route 53 to assign to all of the
	// resource record sets that it creates in the specified hosted zone.
	//
	// This member is required.
	TTL *int64

	// The ID of the traffic policy that you want to use to create resource record sets
	// in the specified hosted zone.
	//
	// This member is required.
	TrafficPolicyId *string

	// The version of the traffic policy that you want to use to create resource record
	// sets in the specified hosted zone.
	//
	// This member is required.
	TrafficPolicyVersion *int32

	// The ID of the hosted zone that you want Amazon Route 53 to create resource
	// record sets in by using the configuration in a traffic policy.
	//
	// This member is required.
	HostedZoneId *string
}

A complex type that contains information about the resource record sets that you want to create based on a specified traffic policy.

type CreateTrafficPolicyInstanceOutput 

type CreateTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the new traffic policy instance.
	//
	// This member is required.
	TrafficPolicyInstance *types.TrafficPolicyInstance

	// A unique URL that represents a new traffic policy instance.
	//
	// This member is required.
	Location *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the CreateTrafficPolicyInstance request.

type CreateTrafficPolicyOutput 

type CreateTrafficPolicyOutput struct {

	// A unique URL that represents a new traffic policy.
	//
	// This member is required.
	Location *string

	// A complex type that contains settings for the new traffic policy.
	//
	// This member is required.
	TrafficPolicy *types.TrafficPolicy

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the CreateTrafficPolicy request.

type CreateTrafficPolicyVersionInput 

type CreateTrafficPolicyVersionInput struct {

	// The definition of this version of the traffic policy, in JSON format. You
	// specified the JSON in the CreateTrafficPolicyVersion request. For more
	// information about the JSON format, see CreateTrafficPolicy
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_CreateTrafficPolicy.html).
	//
	// This member is required.
	Document *string

	// The comment that you specified in the CreateTrafficPolicyVersion request, if
	// any.
	Comment *string

	// The ID of the traffic policy for which you want to create a new version.
	//
	// This member is required.
	Id *string
}

A complex type that contains information about the traffic policy that you want to create a new version for.

type CreateTrafficPolicyVersionOutput 

type CreateTrafficPolicyVersionOutput struct {

	// A unique URL that represents a new traffic policy version.
	//
	// This member is required.
	Location *string

	// A complex type that contains settings for the new version of the traffic policy.
	//
	// This member is required.
	TrafficPolicy *types.TrafficPolicy

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the CreateTrafficPolicyVersion request.

type CreateVPCAssociationAuthorizationInput 

type CreateVPCAssociationAuthorizationInput struct {

	// A complex type that contains the VPC ID and region for the VPC that you want to
	// authorize associating with your hosted zone.
	//
	// This member is required.
	VPC *types.VPC

	// The ID of the private hosted zone that you want to authorize associating a VPC
	// with.
	//
	// This member is required.
	HostedZoneId *string
}

A complex type that contains information about the request to authorize associating a VPC with your private hosted zone. Authorization is only required when a private hosted zone and a VPC were created by using different accounts.

type CreateVPCAssociationAuthorizationOutput 

type CreateVPCAssociationAuthorizationOutput struct {

	// The VPC that you authorized associating with a hosted zone.
	//
	// This member is required.
	VPC *types.VPC

	// The ID of the hosted zone that you authorized associating a VPC with.
	//
	// This member is required.
	HostedZoneId *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information from a CreateVPCAssociationAuthorization request.

type DeleteHealthCheckInput 

type DeleteHealthCheckInput struct {

	// The ID of the health check that you want to delete.
	//
	// This member is required.
	HealthCheckId *string
}

This action deletes a health check.

type DeleteHealthCheckOutput 

type DeleteHealthCheckOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

An empty element.

type DeleteHostedZoneInput 

type DeleteHostedZoneInput struct {

	// The ID of the hosted zone you want to delete.
	//
	// This member is required.
	Id *string
}

A request to delete a hosted zone.

type DeleteHostedZoneOutput 

type DeleteHostedZoneOutput struct {

	// A complex type that contains the ID, the status, and the date and time of a
	// request to delete a hosted zone.
	//
	// This member is required.
	ChangeInfo *types.ChangeInfo

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to a DeleteHostedZone request.

type DeleteQueryLoggingConfigInput 

type DeleteQueryLoggingConfigInput struct {

	// The ID of the configuration that you want to delete.
	//
	// This member is required.
	Id *string
}

type DeleteQueryLoggingConfigOutput 

type DeleteQueryLoggingConfigOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

type DeleteReusableDelegationSetInput 

type DeleteReusableDelegationSetInput struct {

	// The ID of the reusable delegation set that you want to delete.
	//
	// This member is required.
	Id *string
}

A request to delete a reusable delegation set.

type DeleteReusableDelegationSetOutput 

type DeleteReusableDelegationSetOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

An empty element.

type DeleteTrafficPolicyInput 

type DeleteTrafficPolicyInput struct {

	// The ID of the traffic policy that you want to delete.
	//
	// This member is required.
	Id *string

	// The version number of the traffic policy that you want to delete.
	//
	// This member is required.
	Version *int32
}

A request to delete a specified traffic policy version.

type DeleteTrafficPolicyInstanceInput 

type DeleteTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to delete. When you delete a
	// traffic policy instance, Amazon Route 53 also deletes all of the resource record
	// sets that were created when you created the traffic policy instance.
	//
	// This member is required.
	Id *string
}

A request to delete a specified traffic policy instance.

type DeleteTrafficPolicyInstanceOutput 

type DeleteTrafficPolicyInstanceOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

An empty element.

type DeleteTrafficPolicyOutput 

type DeleteTrafficPolicyOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

An empty element.

type DeleteVPCAssociationAuthorizationInput 

type DeleteVPCAssociationAuthorizationInput struct {

	// When removing authorization to associate a VPC that was created by one AWS
	// account with a hosted zone that was created with a different AWS account, a
	// complex type that includes the ID and region of the VPC.
	//
	// This member is required.
	VPC *types.VPC

	// When removing authorization to associate a VPC that was created by one AWS
	// account with a hosted zone that was created with a different AWS account, the ID
	// of the hosted zone.
	//
	// This member is required.
	HostedZoneId *string
}

A complex type that contains information about the request to remove authorization to associate a VPC that was created by one AWS account with a hosted zone that was created with a different AWS account.

type DeleteVPCAssociationAuthorizationOutput 

type DeleteVPCAssociationAuthorizationOutput struct {
	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

Empty response for the request.

type DisassociateVPCFromHostedZoneInput 

type DisassociateVPCFromHostedZoneInput struct {

	// Optional: A comment about the disassociation request.
	Comment *string

	// A complex type that contains information about the VPC that you're
	// disassociating from the specified hosted zone.
	//
	// This member is required.
	VPC *types.VPC

	// The ID of the private hosted zone that you want to disassociate a VPC from.
	//
	// This member is required.
	HostedZoneId *string
}

A complex type that contains information about the VPC that you want to disassociate from a specified private hosted zone.

type DisassociateVPCFromHostedZoneOutput 

type DisassociateVPCFromHostedZoneOutput struct {

	// A complex type that describes the changes made to the specified private hosted
	// zone.
	//
	// This member is required.
	ChangeInfo *types.ChangeInfo

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the disassociate request.

type EndpointResolver 

type EndpointResolver interface {
	ResolveEndpoint(region string, options ResolverOptions) (aws.Endpoint, error)
}

EndpointResolver interface for resolving service endpoints.

func WithEndpointResolver 

func WithEndpointResolver(awsResolver aws.EndpointResolver, fallbackResolver EndpointResolver) EndpointResolver

WithEndpointResolver returns an EndpointResolver that first delegates endpoint resolution to the awsResolver. If awsResolver returns aws.EndpointNotFoundError error, the resolver will use the the provided fallbackResolver for resolution. awsResolver and fallbackResolver must not be nil

type EndpointResolverFunc 

type EndpointResolverFunc func(region string, options ResolverOptions) (aws.Endpoint, error)

EndpointResolverFunc is a helper utility that wraps a function so it satisfies the EndpointResolver interface. This is useful when you want to add additional endpoint resolving logic, or stub out specific endpoints with custom values.

func (EndpointResolverFunc) ResolveEndpoint 

func (fn EndpointResolverFunc) ResolveEndpoint(region string, options ResolverOptions) (endpoint aws.Endpoint, err error)

type GetAccountLimitInput 

type GetAccountLimitInput struct {

	// The limit that you want to get. Valid values include the following:
	//
	//     *
	// MAX_HEALTH_CHECKS_BY_OWNER: The maximum number of health checks that you can
	// create using the current account.
	//
	//     * MAX_HOSTED_ZONES_BY_OWNER: The maximum
	// number of hosted zones that you can create using the current account.
	//
	//     *
	// MAX_REUSABLE_DELEGATION_SETS_BY_OWNER: The maximum number of reusable delegation
	// sets that you can create using the current account.
	//
	//     *
	// MAX_TRAFFIC_POLICIES_BY_OWNER: The maximum number of traffic policies that you
	// can create using the current account.
	//
	//     *
	// MAX_TRAFFIC_POLICY_INSTANCES_BY_OWNER: The maximum number of traffic policy
	// instances that you can create using the current account. (Traffic policy
	// instances are referred to as traffic flow policy records in the Amazon Route 53
	// console.)
	//
	// This member is required.
	Type types.AccountLimitType
}

A complex type that contains information about the request to create a hosted zone.

type GetAccountLimitOutput 

type GetAccountLimitOutput struct {

	// The current number of entities that you have created of the specified type. For
	// example, if you specified MAX_HEALTH_CHECKS_BY_OWNER for the value of Type in
	// the request, the value of Count is the current number of health checks that you
	// have created using the current account.
	//
	// This member is required.
	Count *int64

	// The current setting for the specified limit. For example, if you specified
	// MAX_HEALTH_CHECKS_BY_OWNER for the value of Type in the request, the value of
	// Limit is the maximum number of health checks that you can create using the
	// current account.
	//
	// This member is required.
	Limit *types.AccountLimit

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the requested limit.

type GetChangeInput 

type GetChangeInput struct {

	// The ID of the change batch request. The value that you specify here is the value
	// that ChangeResourceRecordSets returned in the Id element when you submitted the
	// request.
	//
	// This member is required.
	Id *string
}

The input for a GetChange request.

type GetChangeOutput 

type GetChangeOutput struct {

	// A complex type that contains information about the specified change batch.
	//
	// This member is required.
	ChangeInfo *types.ChangeInfo

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the ChangeInfo element.

type GetCheckerIpRangesInput 

type GetCheckerIpRangesInput struct {
}

Empty request.

type GetCheckerIpRangesOutput 

type GetCheckerIpRangesOutput struct {

	// A complex type that contains sorted list of IP ranges in CIDR format for Amazon
	// Route 53 health checkers.
	//
	// This member is required.
	CheckerIpRanges []*string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the CheckerIpRanges element.

type GetGeoLocationInput 

type GetGeoLocationInput struct {

	// For geolocation resource record sets, a two-letter abbreviation that identifies
	// a continent. Amazon Route 53 supports the following continent codes:
	//
	//     * AF:
	// Africa
	//
	//     * AN: Antarctica
	//
	//     * AS: Asia
	//
	//     * EU: Europe
	//
	//     * OC:
	// Oceania
	//
	//     * NA: North America
	//
	//     * SA: South America
	ContinentCode *string

	// For SubdivisionCode, Amazon Route 53 supports only states of the United States.
	// For a list of state abbreviations, see Appendix B: Two–Letter State and
	// Possession Abbreviations (https://pe.usps.com/text/pub28/28apb.htm) on the
	// United States Postal Service website. If you specify subdivisioncode, you must
	// also specify US for CountryCode.
	SubdivisionCode *string

	// Amazon Route 53 uses the two-letter country codes that are specified in ISO
	// standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	CountryCode *string
}

A request for information about whether a specified geographic location is supported for Amazon Route 53 geolocation resource record sets.

type GetGeoLocationOutput 

type GetGeoLocationOutput struct {

	// A complex type that contains the codes and full continent, country, and
	// subdivision names for the specified geolocation code.
	//
	// This member is required.
	GeoLocationDetails *types.GeoLocationDetails

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the specified geolocation code.

type GetHealthCheckCountInput 

type GetHealthCheckCountInput struct {
}

A request for the number of health checks that are associated with the current AWS account.

type GetHealthCheckCountOutput 

type GetHealthCheckCountOutput struct {

	// The number of health checks associated with the current AWS account.
	//
	// This member is required.
	HealthCheckCount *int64

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to a GetHealthCheckCount request.

type GetHealthCheckInput 

type GetHealthCheckInput struct {

	// The identifier that Amazon Route 53 assigned to the health check when you
	// created it. When you add or update a resource record set, you use this value to
	// specify which health check to use. The value can be up to 64 characters long.
	//
	// This member is required.
	HealthCheckId *string
}

A request to get information about a specified health check.

type GetHealthCheckLastFailureReasonInput 

type GetHealthCheckLastFailureReasonInput struct {

	// The ID for the health check for which you want the last failure reason. When you
	// created the health check, CreateHealthCheck returned the ID in the response, in
	// the HealthCheckId element. If you want to get the last failure reason for a
	// calculated health check, you must use the Amazon Route 53 console or the
	// CloudWatch console. You can't use GetHealthCheckLastFailureReason for a
	// calculated health check.
	//
	// This member is required.
	HealthCheckId *string
}

A request for the reason that a health check failed most recently.

type GetHealthCheckLastFailureReasonOutput 

type GetHealthCheckLastFailureReasonOutput struct {

	// A list that contains one Observation element for each Amazon Route 53 health
	// checker that is reporting a last failure reason.
	//
	// This member is required.
	HealthCheckObservations []*types.HealthCheckObservation

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to a GetHealthCheckLastFailureReason request.

type GetHealthCheckOutput 

type GetHealthCheckOutput struct {

	// A complex type that contains information about one health check that is
	// associated with the current AWS account.
	//
	// This member is required.
	HealthCheck *types.HealthCheck

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to a GetHealthCheck request.

type GetHealthCheckStatusInput 

type GetHealthCheckStatusInput struct {

	// The ID for the health check that you want the current status for. When you
	// created the health check, CreateHealthCheck returned the ID in the response, in
	// the HealthCheckId element. If you want to check the status of a calculated
	// health check, you must use the Amazon Route 53 console or the CloudWatch
	// console. You can't use GetHealthCheckStatus to get the status of a calculated
	// health check.
	//
	// This member is required.
	HealthCheckId *string
}

A request to get the status for a health check.

type GetHealthCheckStatusOutput 

type GetHealthCheckStatusOutput struct {

	// A list that contains one HealthCheckObservation element for each Amazon Route 53
	// health checker that is reporting a status about the health check endpoint.
	//
	// This member is required.
	HealthCheckObservations []*types.HealthCheckObservation

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to a GetHealthCheck request.

type GetHostedZoneCountInput 

type GetHostedZoneCountInput struct {
}

A request to retrieve a count of all the hosted zones that are associated with the current AWS account.

type GetHostedZoneCountOutput 

type GetHostedZoneCountOutput struct {

	// The total number of public and private hosted zones that are associated with the
	// current AWS account.
	//
	// This member is required.
	HostedZoneCount *int64

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to a GetHostedZoneCount request.

type GetHostedZoneInput 

type GetHostedZoneInput struct {

	// The ID of the hosted zone that you want to get information about.
	//
	// This member is required.
	Id *string
}

A request to get information about a specified hosted zone.

type GetHostedZoneLimitInput 

type GetHostedZoneLimitInput struct {

	// The ID of the hosted zone that you want to get a limit for.
	//
	// This member is required.
	HostedZoneId *string

	// The limit that you want to get. Valid values include the following:
	//
	//     *
	// MAX_RRSETS_BY_ZONE: The maximum number of records that you can create in the
	// specified hosted zone.
	//
	//     * MAX_VPCS_ASSOCIATED_BY_ZONE: The maximum number of
	// Amazon VPCs that you can associate with the specified private hosted zone.
	//
	// This member is required.
	Type types.HostedZoneLimitType
}

A complex type that contains information about the request to create a hosted zone.

type GetHostedZoneLimitOutput 

type GetHostedZoneLimitOutput struct {

	// The current setting for the specified limit. For example, if you specified
	// MAX_RRSETS_BY_ZONE for the value of Type in the request, the value of Limit is
	// the maximum number of records that you can create in the specified hosted zone.
	//
	// This member is required.
	Limit *types.HostedZoneLimit

	// The current number of entities that you have created of the specified type. For
	// example, if you specified MAX_RRSETS_BY_ZONE for the value of Type in the
	// request, the value of Count is the current number of records that you have
	// created in the specified hosted zone.
	//
	// This member is required.
	Count *int64

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the requested limit.

type GetHostedZoneOutput 

type GetHostedZoneOutput struct {

	// A complex type that lists the Amazon Route 53 name servers for the specified
	// hosted zone.
	DelegationSet *types.DelegationSet

	// A complex type that contains general information about the specified hosted
	// zone.
	//
	// This member is required.
	HostedZone *types.HostedZone

	// A complex type that contains information about the VPCs that are associated with
	// the specified hosted zone.
	VPCs []*types.VPC

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contain the response to a GetHostedZone request.

type GetQueryLoggingConfigInput 

type GetQueryLoggingConfigInput struct {

	// The ID of the configuration for DNS query logging that you want to get
	// information about.
	//
	// This member is required.
	Id *string
}

type GetQueryLoggingConfigOutput 

type GetQueryLoggingConfigOutput struct {

	// A complex type that contains information about the query logging configuration
	// that you specified in a GetQueryLoggingConfig
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_GetQueryLoggingConfig.html)
	// request.
	//
	// This member is required.
	QueryLoggingConfig *types.QueryLoggingConfig

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

type GetReusableDelegationSetInput 

type GetReusableDelegationSetInput struct {

	// The ID of the reusable delegation set that you want to get a list of name
	// servers for.
	//
	// This member is required.
	Id *string
}

A request to get information about a specified reusable delegation set.

type GetReusableDelegationSetLimitInput 

type GetReusableDelegationSetLimitInput struct {

	// The ID of the delegation set that you want to get the limit for.
	//
	// This member is required.
	DelegationSetId *string

	// Specify MAX_ZONES_BY_REUSABLE_DELEGATION_SET to get the maximum number of hosted
	// zones that you can associate with the specified reusable delegation set.
	//
	// This member is required.
	Type types.ReusableDelegationSetLimitType
}

A complex type that contains information about the request to create a hosted zone.

type GetReusableDelegationSetLimitOutput 

type GetReusableDelegationSetLimitOutput struct {

	// The current setting for the limit on hosted zones that you can associate with
	// the specified reusable delegation set.
	//
	// This member is required.
	Limit *types.ReusableDelegationSetLimit

	// The current number of hosted zones that you can associate with the specified
	// reusable delegation set.
	//
	// This member is required.
	Count *int64

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the requested limit.

type GetReusableDelegationSetOutput 

type GetReusableDelegationSetOutput struct {

	// A complex type that contains information about the reusable delegation set.
	//
	// This member is required.
	DelegationSet *types.DelegationSet

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to the GetReusableDelegationSet request.

type GetTrafficPolicyInput 

type GetTrafficPolicyInput struct {

	// The version number of the traffic policy that you want to get information about.
	//
	// This member is required.
	Version *int32

	// The ID of the traffic policy that you want to get information about.
	//
	// This member is required.
	Id *string
}

Gets information about a specific traffic policy version.

type GetTrafficPolicyInstanceCountInput 

type GetTrafficPolicyInstanceCountInput struct {
}

Request to get the number of traffic policy instances that are associated with the current AWS account.

type GetTrafficPolicyInstanceCountOutput 

type GetTrafficPolicyInstanceCountOutput struct {

	// The number of traffic policy instances that are associated with the current AWS
	// account.
	//
	// This member is required.
	TrafficPolicyInstanceCount *int32

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

type GetTrafficPolicyInstanceInput 

type GetTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to get information about.
	//
	// This member is required.
	Id *string
}

Gets information about a specified traffic policy instance.

type GetTrafficPolicyInstanceOutput 

type GetTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the traffic policy instance.
	//
	// This member is required.
	TrafficPolicyInstance *types.TrafficPolicyInstance

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

type GetTrafficPolicyOutput 

type GetTrafficPolicyOutput struct {

	// A complex type that contains settings for the specified traffic policy.
	//
	// This member is required.
	TrafficPolicy *types.TrafficPolicy

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the request.

type HTTPClient 

type HTTPClient interface {
	Do(*http.Request) (*http.Response, error)
}

type HTTPSignerV4 

type HTTPSignerV4 interface {
	SignHTTP(ctx context.Context, credentials aws.Credentials, r *http.Request, payloadHash string, service string, region string, signingTime time.Time) error
}

type ListGeoLocationsInput 

type ListGeoLocationsInput struct {

	// The code for the continent with which you want to start listing locations that
	// Amazon Route 53 supports for geolocation. If Route 53 has already returned a
	// page or more of results, if IsTruncated is true, and if NextContinentCode from
	// the previous response has a value, enter that value in startcontinentcode to
	// return the next page of results. Include startcontinentcode only if you want to
	// list continents. Don't include startcontinentcode when you're listing countries
	// or countries with their subdivisions.
	StartContinentCode *string

	// The code for the state of the United States with which you want to start listing
	// locations that Amazon Route 53 supports for geolocation. If Route 53 has already
	// returned a page or more of results, if IsTruncated is true, and if
	// NextSubdivisionCode from the previous response has a value, enter that value in
	// startsubdivisioncode to return the next page of results. To list subdivisions
	// (U.S. states), you must include both startcountrycode and startsubdivisioncode.
	StartSubdivisionCode *string

	// The code for the country with which you want to start listing locations that
	// Amazon Route 53 supports for geolocation. If Route 53 has already returned a
	// page or more of results, if IsTruncated is true, and if NextCountryCode from the
	// previous response has a value, enter that value in startcountrycode to return
	// the next page of results.
	StartCountryCode *string

	// (Optional) The maximum number of geolocations to be included in the response
	// body for this request. If more than maxitems geolocations remain to be listed,
	// then the value of the IsTruncated element in the response is true.
	MaxItems *string
}

A request to get a list of geographic locations that Amazon Route 53 supports for geolocation resource record sets.

type ListGeoLocationsOutput 

type ListGeoLocationsOutput struct {

	// A complex type that contains one GeoLocationDetails element for each location
	// that Amazon Route 53 supports for geolocation.
	//
	// This member is required.
	GeoLocationDetailsList []*types.GeoLocationDetails

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextSubdivisionCode in the startsubdivisioncode
	// parameter in another ListGeoLocations request.
	NextSubdivisionCode *string

	// A value that indicates whether more locations remain to be listed after the last
	// location in this response. If so, the value of IsTruncated is true. To get more
	// values, submit another request and include the values of NextContinentCode,
	// NextCountryCode, and NextSubdivisionCode in the startcontinentcode,
	// startcountrycode, and startsubdivisioncode, as applicable.
	//
	// This member is required.
	IsTruncated *bool

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextContinentCode in the startcontinentcode
	// parameter in another ListGeoLocations request.
	NextContinentCode *string

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextCountryCode in the startcountrycode parameter
	// in another ListGeoLocations request.
	NextCountryCode *string

	// The value that you specified for MaxItems in the request.
	//
	// This member is required.
	MaxItems *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type containing the response information for the request.

type ListHealthChecksInput 

type ListHealthChecksInput struct {

	// The maximum number of health checks that you want ListHealthChecks to return in
	// response to the current request. Amazon Route 53 returns a maximum of 100 items.
	// If you set MaxItems to a value greater than 100, Route 53 returns only the first
	// 100 health checks.
	MaxItems *string

	// If the value of IsTruncated in the previous response was true, you have more
	// health checks. To get another group, submit another ListHealthChecks request.
	// For the value of marker, specify the value of NextMarker from the previous
	// response, which is the ID of the first health check that Amazon Route 53 will
	// return if you submit another request. If the value of IsTruncated in the
	// previous response was false, there are no more health checks to get.
	Marker *string
}

A request to retrieve a list of the health checks that are associated with the current AWS account.

type ListHealthChecksOutput 

type ListHealthChecksOutput struct {

	// A complex type that contains one HealthCheck element for each health check that
	// is associated with the current AWS account.
	//
	// This member is required.
	HealthChecks []*types.HealthCheck

	// A flag that indicates whether there are more health checks to be listed. If the
	// response was truncated, you can get the next group of health checks by
	// submitting another ListHealthChecks request and specifying the value of
	// NextMarker in the marker parameter.
	//
	// This member is required.
	IsTruncated *bool

	// The value that you specified for the maxitems parameter in the call to
	// ListHealthChecks that produced the current response.
	//
	// This member is required.
	MaxItems *string

	// If IsTruncated is true, the value of NextMarker identifies the first health
	// check that Amazon Route 53 returns if you submit another ListHealthChecks
	// request and specify the value of NextMarker in the marker parameter.
	NextMarker *string

	// For the second and subsequent calls to ListHealthChecks, Marker is the value
	// that you specified for the marker parameter in the previous request.
	//
	// This member is required.
	Marker *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to a ListHealthChecks request.

type ListHostedZonesByNameInput 

type ListHostedZonesByNameInput struct {

	// (Optional) For your first request to ListHostedZonesByName, include the dnsname
	// parameter only if you want to specify the name of the first hosted zone in the
	// response. If you don't include the dnsname parameter, Amazon Route 53 returns
	// all of the hosted zones that were created by the current AWS account, in ASCII
	// order. For subsequent requests, include both dnsname and hostedzoneid
	// parameters. For dnsname, specify the value of NextDNSName from the previous
	// response.
	DNSName *string

	// The maximum number of hosted zones to be included in the response body for this
	// request. If you have more than maxitems hosted zones, then the value of the
	// IsTruncated element in the response is true, and the values of NextDNSName and
	// NextHostedZoneId specify the first hosted zone in the next group of maxitems
	// hosted zones.
	MaxItems *string

	// (Optional) For your first request to ListHostedZonesByName, do not include the
	// hostedzoneid parameter. If you have more hosted zones than the value of
	// maxitems, ListHostedZonesByName returns only the first maxitems hosted zones. To
	// get the next group of maxitems hosted zones, submit another request to
	// ListHostedZonesByName and include both dnsname and hostedzoneid parameters. For
	// the value of hostedzoneid, specify the value of the NextHostedZoneId element
	// from the previous response.
	HostedZoneId *string
}

Retrieves a list of the public and private hosted zones that are associated with the current AWS account in ASCII order by domain name.

type ListHostedZonesByNameOutput 

type ListHostedZonesByNameOutput struct {

	// If IsTruncated is true, the value of NextHostedZoneId identifies the first
	// hosted zone in the next group of maxitems hosted zones. Call
	// ListHostedZonesByName again and specify the value of NextDNSName and
	// NextHostedZoneId in the dnsname and hostedzoneid parameters, respectively. This
	// element is present only if IsTruncated is true.
	NextHostedZoneId *string

	// The ID that Amazon Route 53 assigned to the hosted zone when you created it.
	HostedZoneId *string

	// For the second and subsequent calls to ListHostedZonesByName, DNSName is the
	// value that you specified for the dnsname parameter in the request that produced
	// the current response.
	DNSName *string

	// If IsTruncated is true, the value of NextDNSName is the name of the first hosted
	// zone in the next group of maxitems hosted zones. Call ListHostedZonesByName
	// again and specify the value of NextDNSName and NextHostedZoneId in the dnsname
	// and hostedzoneid parameters, respectively. This element is present only if
	// IsTruncated is true.
	NextDNSName *string

	// The value that you specified for the maxitems parameter in the call to
	// ListHostedZonesByName that produced the current response.
	//
	// This member is required.
	MaxItems *string

	// A complex type that contains general information about the hosted zone.
	//
	// This member is required.
	HostedZones []*types.HostedZone

	// A flag that indicates whether there are more hosted zones to be listed. If the
	// response was truncated, you can get the next group of maxitems hosted zones by
	// calling ListHostedZonesByName again and specifying the values of NextDNSName and
	// NextHostedZoneId elements in the dnsname and hostedzoneid parameters.
	//
	// This member is required.
	IsTruncated *bool

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the request.

type ListHostedZonesByVPCInput 

type ListHostedZonesByVPCInput struct {

	// For the Amazon VPC that you specified for VPCId, the AWS Region that you created
	// the VPC in.
	//
	// This member is required.
	VPCRegion types.VPCRegion

	// The ID of the Amazon VPC that you want to list hosted zones for.
	//
	// This member is required.
	VPCId *string

	// If the previous response included a NextToken element, the specified VPC is
	// associated with more hosted zones. To get more hosted zones, submit another
	// ListHostedZonesByVPC request. For the value of NextToken, specify the value of
	// NextToken from the previous response. If the previous response didn't include a
	// NextToken element, there are no more hosted zones to get.
	NextToken *string

	// (Optional) The maximum number of hosted zones that you want Amazon Route 53 to
	// return. If the specified VPC is associated with more than MaxItems hosted zones,
	// the response includes a NextToken element. NextToken contains the hosted zone ID
	// of the first hosted zone that Route 53 will return if you submit another
	// request.
	MaxItems *string
}

Lists all the private hosted zones that a specified VPC is associated with, regardless of which AWS account created the hosted zones.

type ListHostedZonesByVPCOutput 

type ListHostedZonesByVPCOutput struct {

	// The value that you specified for MaxItems in the most recent
	// ListHostedZonesByVPC request.
	//
	// This member is required.
	MaxItems *string

	// The value that you specified for NextToken in the most recent
	// ListHostedZonesByVPC request.
	NextToken *string

	// A list that contains one HostedZoneSummary element for each hosted zone that the
	// specified Amazon VPC is associated with. Each HostedZoneSummary element contains
	// the hosted zone name and ID, and information about who owns the hosted zone.
	//
	// This member is required.
	HostedZoneSummaries []*types.HostedZoneSummary

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

type ListHostedZonesInput 

type ListHostedZonesInput struct {

	// If you're using reusable delegation sets and you want to list all of the hosted
	// zones that are associated with a reusable delegation set, specify the ID of that
	// reusable delegation set.
	DelegationSetId *string

	// If the value of IsTruncated in the previous response was true, you have more
	// hosted zones. To get more hosted zones, submit another ListHostedZones request.
	// For the value of marker, specify the value of NextMarker from the previous
	// response, which is the ID of the first hosted zone that Amazon Route 53 will
	// return if you submit another request. If the value of IsTruncated in the
	// previous response was false, there are no more hosted zones to get.
	Marker *string

	// (Optional) The maximum number of hosted zones that you want Amazon Route 53 to
	// return. If you have more than maxitems hosted zones, the value of IsTruncated in
	// the response is true, and the value of NextMarker is the hosted zone ID of the
	// first hosted zone that Route 53 will return if you submit another request.
	MaxItems *string
}

A request to retrieve a list of the public and private hosted zones that are associated with the current AWS account.

type ListHostedZonesOutput 

type ListHostedZonesOutput struct {

	// If IsTruncated is true, the value of NextMarker identifies the first hosted zone
	// in the next group of hosted zones. Submit another ListHostedZones request, and
	// specify the value of NextMarker from the response in the marker parameter. This
	// element is present only if IsTruncated is true.
	NextMarker *string

	// A complex type that contains general information about the hosted zone.
	//
	// This member is required.
	HostedZones []*types.HostedZone

	// A flag indicating whether there are more hosted zones to be listed. If the
	// response was truncated, you can get more hosted zones by submitting another
	// ListHostedZones request and specifying the value of NextMarker in the marker
	// parameter.
	//
	// This member is required.
	IsTruncated *bool

	// The value that you specified for the maxitems parameter in the call to
	// ListHostedZones that produced the current response.
	//
	// This member is required.
	MaxItems *string

	// For the second and subsequent calls to ListHostedZones, Marker is the value that
	// you specified for the marker parameter in the request that produced the current
	// response.
	//
	// This member is required.
	Marker *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

type ListQueryLoggingConfigsInput 

type ListQueryLoggingConfigsInput struct {

	// (Optional) If you want to list the query logging configuration that is
	// associated with a hosted zone, specify the ID in HostedZoneId. If you don't
	// specify a hosted zone ID, ListQueryLoggingConfigs returns all of the
	// configurations that are associated with the current AWS account.
	HostedZoneId *string

	// (Optional) If the current AWS account has more than MaxResults query logging
	// configurations, use NextToken to get the second and subsequent pages of results.
	// For the first ListQueryLoggingConfigs request, omit this value. For the second
	// and subsequent requests, get the value of NextToken from the previous response
	// and specify that value for NextToken in the request.
	NextToken *string

	// (Optional) The maximum number of query logging configurations that you want
	// Amazon Route 53 to return in response to the current request. If the current AWS
	// account has more than MaxResults configurations, use the value of NextToken
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_ListQueryLoggingConfigs.html#API_ListQueryLoggingConfigs_RequestSyntax)
	// in the response to get the next page of results. If you don't specify a value
	// for MaxResults, Route 53 returns up to 100 configurations.
	MaxResults *string
}

type ListQueryLoggingConfigsOutput 

type ListQueryLoggingConfigsOutput struct {

	// An array that contains one QueryLoggingConfig
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_QueryLoggingConfig.html)
	// element for each configuration for DNS query logging that is associated with the
	// current AWS account.
	//
	// This member is required.
	QueryLoggingConfigs []*types.QueryLoggingConfig

	// If a response includes the last of the query logging configurations that are
	// associated with the current AWS account, NextToken doesn't appear in the
	// response. If a response doesn't include the last of the configurations, you can
	// get more configurations by submitting another ListQueryLoggingConfigs
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_ListQueryLoggingConfigs.html)
	// request. Get the value of NextToken that Amazon Route 53 returned in the
	// previous response and include it in NextToken in the next request.
	NextToken *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

type ListResourceRecordSetsInput 

type ListResourceRecordSetsInput struct {

	// The ID of the hosted zone that contains the resource record sets that you want
	// to list.
	//
	// This member is required.
	HostedZoneId *string

	// The first name in the lexicographic ordering of resource record sets that you
	// want to list. If the specified record name doesn't exist, the results begin with
	// the first resource record set that has a name greater than the value of name.
	StartRecordName *string

	// (Optional) The maximum number of resource records sets to include in the
	// response body for this request. If the response includes more than maxitems
	// resource record sets, the value of the IsTruncated element in the response is
	// true, and the values of the NextRecordName and NextRecordType elements in the
	// response identify the first resource record set in the next group of maxitems
	// resource record sets.
	MaxItems *string

	// Resource record sets that have a routing policy other than simple: If results
	// were truncated for a given DNS name and type, specify the value of
	// NextRecordIdentifier from the previous response to get the next resource record
	// set that has the current DNS name and type.
	StartRecordIdentifier *string

	// The type of resource record set to begin the record listing from. Valid values
	// for basic resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR | NS | PTR |
	// SOA | SPF | SRV | TXT Values for weighted, latency, geolocation, and failover
	// resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR | PTR | SPF | SRV |
	// TXT Values for alias resource record sets:
	//
	//     * API Gateway custom regional
	// API or edge-optimized API: A
	//
	//     * CloudFront distribution: A or AAAA
	//
	//     *
	// Elastic Beanstalk environment that has a regionalized subdomain: A
	//
	//     *
	// Elastic Load Balancing load balancer: A | AAAA
	//
	//     * S3 bucket: A
	//
	//     * VPC
	// interface VPC endpoint: A
	//
	//     * Another resource record set in this hosted
	// zone: The type of the resource record set that the alias
	// references.
	//
	// Constraint: Specifying type without specifying name returns an
	// InvalidInput error.
	StartRecordType types.RRType
}

A request for the resource record sets that are associated with a specified hosted zone.

type ListResourceRecordSetsOutput 

type ListResourceRecordSetsOutput struct {

	// A flag that indicates whether more resource record sets remain to be listed. If
	// your results were truncated, you can make a follow-up pagination request by
	// using the NextRecordName element.
	//
	// This member is required.
	IsTruncated *bool

	// Information about multiple resource record sets.
	//
	// This member is required.
	ResourceRecordSets []*types.ResourceRecordSet

	// The maximum number of records you requested.
	//
	// This member is required.
	MaxItems *string

	// Resource record sets that have a routing policy other than simple: If results
	// were truncated for a given DNS name and type, the value of SetIdentifier for the
	// next resource record set that has the current DNS name and type. For information
	// about routing policies, see Choosing a Routing Policy
	// (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/routing-policy.html)
	// in the Amazon Route 53 Developer Guide.
	NextRecordIdentifier *string

	// If the results were truncated, the type of the next record in the list. This
	// element is present only if IsTruncated is true.
	NextRecordType types.RRType

	// If the results were truncated, the name of the next record in the list. This
	// element is present only if IsTruncated is true.
	NextRecordName *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains list information for the resource record set.

type ListReusableDelegationSetsInput 

type ListReusableDelegationSetsInput struct {

	// If the value of IsTruncated in the previous response was true, you have more
	// reusable delegation sets. To get another group, submit another
	// ListReusableDelegationSets request. For the value of marker, specify the value
	// of NextMarker from the previous response, which is the ID of the first reusable
	// delegation set that Amazon Route 53 will return if you submit another request.
	// If the value of IsTruncated in the previous response was false, there are no
	// more reusable delegation sets to get.
	Marker *string

	// The number of reusable delegation sets that you want Amazon Route 53 to return
	// in the response to this request. If you specify a value greater than 100, Route
	// 53 returns only the first 100 reusable delegation sets.
	MaxItems *string
}

A request to get a list of the reusable delegation sets that are associated with the current AWS account.

type ListReusableDelegationSetsOutput 

type ListReusableDelegationSetsOutput struct {

	// A complex type that contains one DelegationSet element for each reusable
	// delegation set that was created by the current AWS account.
	//
	// This member is required.
	DelegationSets []*types.DelegationSet

	// For the second and subsequent calls to ListReusableDelegationSets, Marker is the
	// value that you specified for the marker parameter in the request that produced
	// the current response.
	//
	// This member is required.
	Marker *string

	// If IsTruncated is true, the value of NextMarker identifies the next reusable
	// delegation set that Amazon Route 53 will return if you submit another
	// ListReusableDelegationSets request and specify the value of NextMarker in the
	// marker parameter.
	NextMarker *string

	// A flag that indicates whether there are more reusable delegation sets to be
	// listed.
	//
	// This member is required.
	IsTruncated *bool

	// The value that you specified for the maxitems parameter in the call to
	// ListReusableDelegationSets that produced the current response.
	//
	// This member is required.
	MaxItems *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains information about the reusable delegation sets that are associated with the current AWS account.

type ListTagsForResourceInput 

type ListTagsForResourceInput struct {

	// The ID of the resource for which you want to retrieve tags.
	//
	// This member is required.
	ResourceId *string

	// The type of the resource.
	//
	//     * The resource type for health checks is
	// healthcheck.
	//
	//     * The resource type for hosted zones is hostedzone.
	//
	// This member is required.
	ResourceType types.TagResourceType
}

A complex type containing information about a request for a list of the tags that are associated with an individual resource.

type ListTagsForResourceOutput 

type ListTagsForResourceOutput struct {

	// A ResourceTagSet containing tags associated with the specified resource.
	//
	// This member is required.
	ResourceTagSet *types.ResourceTagSet

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains information about the health checks or hosted zones for which you want to list tags.

type ListTagsForResourcesInput 

type ListTagsForResourcesInput struct {

	// The type of the resources.
	//
	//     * The resource type for health checks is
	// healthcheck.
	//
	//     * The resource type for hosted zones is hostedzone.
	//
	// This member is required.
	ResourceType types.TagResourceType

	// A complex type that contains the ResourceId element for each resource for which
	// you want to get a list of tags.
	//
	// This member is required.
	ResourceIds []*string
}

A complex type that contains information about the health checks or hosted zones for which you want to list tags.

type ListTagsForResourcesOutput 

type ListTagsForResourcesOutput struct {

	// A list of ResourceTagSets containing tags associated with the specified
	// resources.
	//
	// This member is required.
	ResourceTagSets []*types.ResourceTagSet

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type containing tags for the specified resources.

type ListTrafficPoliciesInput 

type ListTrafficPoliciesInput struct {

	// (Conditional) For your first request to ListTrafficPolicies, don't include the
	// TrafficPolicyIdMarker parameter. If you have more traffic policies than the
	// value of MaxItems, ListTrafficPolicies returns only the first MaxItems traffic
	// policies. To get the next group of policies, submit another request to
	// ListTrafficPolicies. For the value of TrafficPolicyIdMarker, specify the value
	// of TrafficPolicyIdMarker that was returned in the previous response.
	TrafficPolicyIdMarker *string

	// (Optional) The maximum number of traffic policies that you want Amazon Route 53
	// to return in response to this request. If you have more than MaxItems traffic
	// policies, the value of IsTruncated in the response is true, and the value of
	// TrafficPolicyIdMarker is the ID of the first traffic policy that Route 53 will
	// return if you submit another request.
	MaxItems *string
}

A complex type that contains the information about the request to list the traffic policies that are associated with the current AWS account.

type ListTrafficPoliciesOutput 

type ListTrafficPoliciesOutput struct {

	// If the value of IsTruncated is true, TrafficPolicyIdMarker is the ID of the
	// first traffic policy in the next group of MaxItems traffic policies.
	//
	// This member is required.
	TrafficPolicyIdMarker *string

	// A flag that indicates whether there are more traffic policies to be listed. If
	// the response was truncated, you can get the next group of traffic policies by
	// submitting another ListTrafficPolicies request and specifying the value of
	// TrafficPolicyIdMarker in the TrafficPolicyIdMarker request parameter.
	//
	// This member is required.
	IsTruncated *bool

	// The value that you specified for the MaxItems parameter in the
	// ListTrafficPolicies request that produced the current response.
	//
	// This member is required.
	MaxItems *string

	// A list that contains one TrafficPolicySummary element for each traffic policy
	// that was created by the current AWS account.
	//
	// This member is required.
	TrafficPolicySummaries []*types.TrafficPolicySummary

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the request.

type ListTrafficPolicyInstancesByHostedZoneInput 

type ListTrafficPolicyInstancesByHostedZoneInput struct {

	// If the value of IsTruncated in the previous response is true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of trafficpolicyinstancetype,
	// specify the value of TrafficPolicyInstanceTypeMarker from the previous response,
	// which is the type of the first traffic policy instance in the next group of
	// traffic policy instances. If the value of IsTruncated in the previous response
	// was false, there are no more traffic policy instances to get.
	TrafficPolicyInstanceTypeMarker types.RRType

	// The ID of the hosted zone that you want to list traffic policy instances for.
	//
	// This member is required.
	HostedZoneId *string

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values of
	// HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and
	// TrafficPolicyInstanceTypeMarker represent the first traffic policy instance that
	// Amazon Route 53 will return if you submit another request.
	MaxItems *string

	// If the value of IsTruncated in the previous response is true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of trafficpolicyinstancename,
	// specify the value of TrafficPolicyInstanceNameMarker from the previous response,
	// which is the name of the first traffic policy instance in the next group of
	// traffic policy instances. If the value of IsTruncated in the previous response
	// was false, there are no more traffic policy instances to get.
	TrafficPolicyInstanceNameMarker *string
}

A request for the traffic policy instances that you created in a specified hosted zone.

type ListTrafficPolicyInstancesByHostedZoneOutput 

type ListTrafficPolicyInstancesByHostedZoneOutput struct {

	// A flag that indicates whether there are more traffic policy instances to be
	// listed. If the response was truncated, you can get the next group of traffic
	// policy instances by submitting another ListTrafficPolicyInstancesByHostedZone
	// request and specifying the values of HostedZoneIdMarker,
	// TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker in the
	// corresponding request parameters.
	//
	// This member is required.
	IsTruncated *bool

	// The value that you specified for the MaxItems parameter in the
	// ListTrafficPolicyInstancesByHostedZone request that produced the current
	// response.
	//
	// This member is required.
	MaxItems *string

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// This member is required.
	TrafficPolicyInstances []*types.TrafficPolicyInstance

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the first
	// traffic policy instance in the next group of traffic policy instances.
	TrafficPolicyInstanceNameMarker *string

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of the
	// resource record sets that are associated with the first traffic policy instance
	// in the next group of traffic policy instances.
	TrafficPolicyInstanceTypeMarker types.RRType

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the request.

type ListTrafficPolicyInstancesByPolicyInput 

type ListTrafficPolicyInstancesByPolicyInput struct {

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstancesByPolicy request. For the value of
	// trafficpolicyinstancetype, specify the value of TrafficPolicyInstanceTypeMarker
	// from the previous response, which is the name of the first traffic policy
	// instance that Amazon Route 53 will return if you submit another request. If the
	// value of IsTruncated in the previous response was false, there are no more
	// traffic policy instances to get.
	TrafficPolicyInstanceTypeMarker types.RRType

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstancesByPolicy request. For the value of hostedzoneid,
	// specify the value of HostedZoneIdMarker from the previous response, which is the
	// hosted zone ID of the first traffic policy instance that Amazon Route 53 will
	// return if you submit another request. If the value of IsTruncated in the
	// previous response was false, there are no more traffic policy instances to get.
	HostedZoneIdMarker *string

	// The ID of the traffic policy for which you want to list traffic policy
	// instances.
	//
	// This member is required.
	TrafficPolicyId *string

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstancesByPolicy request. For the value of
	// trafficpolicyinstancename, specify the value of TrafficPolicyInstanceNameMarker
	// from the previous response, which is the name of the first traffic policy
	// instance that Amazon Route 53 will return if you submit another request. If the
	// value of IsTruncated in the previous response was false, there are no more
	// traffic policy instances to get.
	TrafficPolicyInstanceNameMarker *string

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values of
	// HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and
	// TrafficPolicyInstanceTypeMarker represent the first traffic policy instance that
	// Amazon Route 53 will return if you submit another request.
	MaxItems *string

	// The version of the traffic policy for which you want to list traffic policy
	// instances. The version must be associated with the traffic policy that is
	// specified by TrafficPolicyId.
	//
	// This member is required.
	TrafficPolicyVersion *int32
}

A complex type that contains the information about the request to list your traffic policy instances.

type ListTrafficPolicyInstancesByPolicyOutput 

type ListTrafficPolicyInstancesByPolicyOutput struct {

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// This member is required.
	TrafficPolicyInstances []*types.TrafficPolicyInstance

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the first
	// traffic policy instance in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceNameMarker *string

	// A flag that indicates whether there are more traffic policy instances to be
	// listed. If the response was truncated, you can get the next group of traffic
	// policy instances by calling ListTrafficPolicyInstancesByPolicy again and
	// specifying the values of the HostedZoneIdMarker,
	// TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker elements in
	// the corresponding request parameters.
	//
	// This member is required.
	IsTruncated *bool

	// The value that you specified for the MaxItems parameter in the call to
	// ListTrafficPolicyInstancesByPolicy that produced the current response.
	//
	// This member is required.
	MaxItems *string

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of the
	// resource record sets that are associated with the first traffic policy instance
	// in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceTypeMarker types.RRType

	// If IsTruncated is true, HostedZoneIdMarker is the ID of the hosted zone of the
	// first traffic policy instance in the next group of traffic policy instances.
	HostedZoneIdMarker *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the request.

type ListTrafficPolicyInstancesInput 

type ListTrafficPolicyInstancesInput struct {

	// The maximum number of traffic policy instances that you want Amazon Route 53 to
	// return in response to a ListTrafficPolicyInstances request. If you have more
	// than MaxItems traffic policy instances, the value of the IsTruncated element in
	// the response is true, and the values of HostedZoneIdMarker,
	// TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker represent
	// the first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	MaxItems *string

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of HostedZoneId, specify the
	// value of HostedZoneIdMarker from the previous response, which is the hosted zone
	// ID of the first traffic policy instance in the next group of traffic policy
	// instances. If the value of IsTruncated in the previous response was false, there
	// are no more traffic policy instances to get.
	HostedZoneIdMarker *string

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of trafficpolicyinstancetype,
	// specify the value of TrafficPolicyInstanceTypeMarker from the previous response,
	// which is the type of the first traffic policy instance in the next group of
	// traffic policy instances. If the value of IsTruncated in the previous response
	// was false, there are no more traffic policy instances to get.
	TrafficPolicyInstanceTypeMarker types.RRType

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of trafficpolicyinstancename,
	// specify the value of TrafficPolicyInstanceNameMarker from the previous response,
	// which is the name of the first traffic policy instance in the next group of
	// traffic policy instances. If the value of IsTruncated in the previous response
	// was false, there are no more traffic policy instances to get.
	TrafficPolicyInstanceNameMarker *string
}

A request to get information about the traffic policy instances that you created by using the current AWS account.

type ListTrafficPolicyInstancesOutput 

type ListTrafficPolicyInstancesOutput struct {

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the first
	// traffic policy instance that Route 53 will return if you submit another
	// ListTrafficPolicyInstances request.
	TrafficPolicyInstanceNameMarker *string

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// This member is required.
	TrafficPolicyInstances []*types.TrafficPolicyInstance

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of the
	// resource record sets that are associated with the first traffic policy instance
	// that Amazon Route 53 will return if you submit another
	// ListTrafficPolicyInstances request.
	TrafficPolicyInstanceTypeMarker types.RRType

	// A flag that indicates whether there are more traffic policy instances to be
	// listed. If the response was truncated, you can get more traffic policy instances
	// by calling ListTrafficPolicyInstances again and specifying the values of the
	// HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and
	// TrafficPolicyInstanceTypeMarker in the corresponding request parameters.
	//
	// This member is required.
	IsTruncated *bool

	// If IsTruncated is true, HostedZoneIdMarker is the ID of the hosted zone of the
	// first traffic policy instance that Route 53 will return if you submit another
	// ListTrafficPolicyInstances request.
	HostedZoneIdMarker *string

	// The value that you specified for the MaxItems parameter in the call to
	// ListTrafficPolicyInstances that produced the current response.
	//
	// This member is required.
	MaxItems *string

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the request.

type ListTrafficPolicyVersionsInput 

type ListTrafficPolicyVersionsInput struct {

	// The maximum number of traffic policy versions that you want Amazon Route 53 to
	// include in the response body for this request. If the specified traffic policy
	// has more than MaxItems versions, the value of IsTruncated in the response is
	// true, and the value of the TrafficPolicyVersionMarker element is the ID of the
	// first version that Route 53 will return if you submit another request.
	MaxItems *string

	// For your first request to ListTrafficPolicyVersions, don't include the
	// TrafficPolicyVersionMarker parameter. If you have more traffic policy versions
	// than the value of MaxItems, ListTrafficPolicyVersions returns only the first
	// group of MaxItems versions. To get more traffic policy versions, submit another
	// ListTrafficPolicyVersions request. For the value of TrafficPolicyVersionMarker,
	// specify the value of TrafficPolicyVersionMarker in the previous response.
	TrafficPolicyVersionMarker *string

	// Specify the value of Id of the traffic policy for which you want to list all
	// versions.
	//
	// This member is required.
	Id *string
}

A complex type that contains the information about the request to list your traffic policies.

type ListTrafficPolicyVersionsOutput 

type ListTrafficPolicyVersionsOutput struct {

	// The value that you specified for the maxitems parameter in the
	// ListTrafficPolicyVersions request that produced the current response.
	//
	// This member is required.
	MaxItems *string

	// A flag that indicates whether there are more traffic policies to be listed. If
	// the response was truncated, you can get the next group of traffic policies by
	// submitting another ListTrafficPolicyVersions request and specifying the value of
	// NextMarker in the marker parameter.
	//
	// This member is required.
	IsTruncated *bool

	// If IsTruncated is true, the value of TrafficPolicyVersionMarker identifies the
	// first traffic policy that Amazon Route 53 will return if you submit another
	// request. Call ListTrafficPolicyVersions again and specify the value of
	// TrafficPolicyVersionMarker in the TrafficPolicyVersionMarker request parameter.
	// This element is present only if IsTruncated is true.
	//
	// This member is required.
	TrafficPolicyVersionMarker *string

	// A list that contains one TrafficPolicy element for each traffic policy version
	// that is associated with the specified traffic policy.
	//
	// This member is required.
	TrafficPolicies []*types.TrafficPolicy

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the request.

type ListVPCAssociationAuthorizationsInput 

type ListVPCAssociationAuthorizationsInput struct {

	// Optional: An integer that specifies the maximum number of VPCs that you want
	// Amazon Route 53 to return. If you don't specify a value for MaxResults, Route 53
	// returns up to 50 VPCs per page.
	MaxResults *string

	// Optional: If a response includes a NextToken element, there are more VPCs that
	// can be associated with the specified hosted zone. To get the next page of
	// results, submit another request, and include the value of NextToken from the
	// response in the nexttoken parameter in another ListVPCAssociationAuthorizations
	// request.
	NextToken *string

	// The ID of the hosted zone for which you want a list of VPCs that can be
	// associated with the hosted zone.
	//
	// This member is required.
	HostedZoneId *string
}

A complex type that contains information about that can be associated with your hosted zone.

type ListVPCAssociationAuthorizationsOutput 

type ListVPCAssociationAuthorizationsOutput struct {

	// The ID of the hosted zone that you can associate the listed VPCs with.
	//
	// This member is required.
	HostedZoneId *string

	// When the response includes a NextToken element, there are more VPCs that can be
	// associated with the specified hosted zone. To get the next page of VPCs, submit
	// another ListVPCAssociationAuthorizations request, and include the value of the
	// NextToken element from the response in the nexttoken request parameter.
	NextToken *string

	// The list of VPCs that are authorized to be associated with the specified hosted
	// zone.
	//
	// This member is required.
	VPCs []*types.VPC

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the request.

type Options 

type Options struct {
	// Set of options to modify how an operation is invoked. These apply to all
	// operations invoked for this client. Use functional options on operation call to
	// modify this list for per operation behavior.
	APIOptions []func(*middleware.Stack) error

	// The credentials object to use when signing requests.
	Credentials aws.CredentialsProvider

	// The endpoint options to be used when attempting to resolve an endpoint.
	EndpointOptions ResolverOptions

	// The service endpoint resolver.
	EndpointResolver EndpointResolver

	// Signature Version 4 (SigV4) Signer
	HTTPSignerV4 HTTPSignerV4

	// The region to send requests to. (Required)
	Region string

	// Retryer guides how HTTP requests should be retried in case of recoverable
	// failures. When nil the API client will use a default retryer.
	Retryer retry.Retryer

	// The HTTP client to invoke API calls with. Defaults to client's default HTTP
	// implementation if nil.
	HTTPClient HTTPClient
}

func (Options) Copy 

func (o Options) Copy() Options

Copy creates a clone where the APIOptions list is deep copied.

func (Options) GetCredentials 

func (o Options) GetCredentials() aws.CredentialsProvider

func (Options) GetEndpointOptions 

func (o Options) GetEndpointOptions() ResolverOptions

func (Options) GetEndpointResolver 

func (o Options) GetEndpointResolver() EndpointResolver

func (Options) GetHTTPSignerV4 

func (o Options) GetHTTPSignerV4() HTTPSignerV4

func (Options) GetRegion 

func (o Options) GetRegion() string

func (Options) GetRetryer 

func (o Options) GetRetryer() retry.Retryer

type ResolveEndpoint 

type ResolveEndpoint struct {
	Resolver EndpointResolver
	Options  ResolverOptions
}

func (*ResolveEndpoint) HandleSerialize 

func (m *ResolveEndpoint) HandleSerialize(ctx context.Context, in middleware.SerializeInput, next middleware.SerializeHandler) (
	out middleware.SerializeOutput, metadata middleware.Metadata, err error,
)

func (*ResolveEndpoint) ID 

func (*ResolveEndpoint) ID() string

type ResolveEndpointMiddlewareOptions 

type ResolveEndpointMiddlewareOptions interface {
	GetEndpointResolver() EndpointResolver
	GetEndpointOptions() ResolverOptions
}

type ResolverOptions 

type ResolverOptions = internalendpoints.Options

ResolverOptions is the service endpoint resolver options

type TestDNSAnswerInput 

type TestDNSAnswerInput struct {

	// If you want to simulate a request from a specific DNS resolver, specify the IP
	// address for that resolver. If you omit this value, TestDnsAnswer uses the IP
	// address of a DNS resolver in the AWS US East (N. Virginia) Region (us-east-1).
	ResolverIP *string

	// The ID of the hosted zone that you want Amazon Route 53 to simulate a query for.
	//
	// This member is required.
	HostedZoneId *string

	// The name of the resource record set that you want Amazon Route 53 to simulate a
	// query for.
	//
	// This member is required.
	RecordName *string

	// If you specify an IP address for edns0clientsubnetip, you can optionally specify
	// the number of bits of the IP address that you want the checking tool to include
	// in the DNS query. For example, if you specify 192.0.2.44 for edns0clientsubnetip
	// and 24 for edns0clientsubnetmask, the checking tool will simulate a request from
	// 192.0.2.0/24. The default value is 24 bits for IPv4 addresses and 64 bits for
	// IPv6 addresses. The range of valid values depends on whether edns0clientsubnetip
	// is an IPv4 or an IPv6 address:
	//
	//     * IPv4: Specify a value between 0 and 32
	//
	//
	// * IPv6: Specify a value between 0 and 128
	EDNS0ClientSubnetMask *string

	// The type of the resource record set.
	//
	// This member is required.
	RecordType types.RRType

	// If the resolver that you specified for resolverip supports EDNS0, specify the
	// IPv4 or IPv6 address of a client in the applicable location, for example,
	// 192.0.2.44 or 2001:db8:85a3::8a2e:370:7334.
	EDNS0ClientSubnetIP *string
}

Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet mask.

type TestDNSAnswerOutput 

type TestDNSAnswerOutput struct {

	// The Amazon Route 53 name server used to respond to the request.
	//
	// This member is required.
	Nameserver *string

	// The protocol that Amazon Route 53 used to respond to the request, either UDP or
	// TCP.
	//
	// This member is required.
	Protocol *string

	// The name of the resource record set that you submitted a request for.
	//
	// This member is required.
	RecordName *string

	// A code that indicates whether the request is valid or not. The most common
	// response code is NOERROR, meaning that the request is valid. If the response is
	// not valid, Amazon Route 53 returns a response code that describes the error. For
	// a list of possible response codes, see DNS RCODES
	// (http://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-6)
	// on the IANA website.
	//
	// This member is required.
	ResponseCode *string

	// A list that contains values that Amazon Route 53 returned for this resource
	// record set.
	//
	// This member is required.
	RecordData []*string

	// The type of the resource record set that you submitted a request for.
	//
	// This member is required.
	RecordType types.RRType

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to a TestDNSAnswer request.

type UpdateHealthCheckInput 

type UpdateHealthCheckInput struct {

	// Stops Route 53 from performing health checks. When you disable a health check,
	// here's what happens:
	//
	//     * Health checks that check the health of endpoints:
	// Route 53 stops submitting requests to your application, server, or other
	// resource.
	//
	//     * Calculated health checks: Route 53 stops aggregating the status
	// of the referenced health checks.
	//
	//     * Health checks that monitor CloudWatch
	// alarms: Route 53 stops monitoring the corresponding CloudWatch metrics.
	//
	//
	// <p>After you disable a health check, Route 53 considers the status of the health
	// check to always be healthy. If you configured DNS failover, Route 53 continues
	// to route traffic to the corresponding resources. If you want to stop routing
	// traffic to a resource, change the value of <a
	// href="https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-Inverted">Inverted</a>.
	// </p> <p>Charges for a health check still apply when the health check is
	// disabled. For more information, see <a
	// href="http://aws.amazon.com/route53/pricing/">Amazon Route 53 Pricing</a>.</p>
	Disabled *bool

	// The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to
	// perform health checks on. If you don't specify a value for IPAddress, Route 53
	// sends a DNS request to resolve the domain name that you specify in
	// FullyQualifiedDomainName at the interval that you specify in RequestInterval.
	// Using an IP address that is returned by DNS, Route 53 then checks the health of
	// the endpoint. Use one of the following formats for the value of IPAddress:
	//
	//
	// * IPv4 address: four values between 0 and 255, separated by periods (.), for
	// example, 192.0.2.44.
	//
	//     * IPv6 address: eight groups of four hexadecimal
	// values, separated by colons (:), for example,
	// 2001:0db8:85a3:0000:0000:abcd:0001:2345. You can also shorten IPv6 addresses as
	// described in RFC 5952, for example, 2001:db8:85a3::abcd:1:2345.
	//
	// If the endpoint
	// is an EC2 instance, we recommend that you create an Elastic IP address,
	// associate it with your EC2 instance, and specify the Elastic IP address for
	// IPAddress. This ensures that the IP address of your instance never changes. For
	// more information, see the applicable documentation:
	//
	//     * Linux: Elastic IP
	// Addresses (EIP)
	// (https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html)
	// in the Amazon EC2 User Guide for Linux Instances
	//
	//     * Windows: Elastic IP
	// Addresses (EIP)
	// (https://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html)
	// in the Amazon EC2 User Guide for Windows Instances
	//
	// If a health check already
	// has a value for IPAddress, you can change the value. However, you can't update
	// an existing health check to add or remove the value of IPAddress. For more
	// information, see FullyQualifiedDomainName
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName).
	// Constraints: Route 53 can't check the health of endpoints for which the IP
	// address is in local, private, non-routable, or multicast ranges. For more
	// information about IP addresses for which you can't create health checks, see the
	// following documents:
	//
	//     * RFC 5735, Special Use IPv4 Addresses
	// (https://tools.ietf.org/html/rfc5735)
	//
	//     * RFC 6598, IANA-Reserved IPv4 Prefix
	// for Shared Address Space (https://tools.ietf.org/html/rfc6598)
	//
	//     * RFC 5156,
	// Special-Use IPv6 Addresses (https://tools.ietf.org/html/rfc5156)
	IPAddress *string

	// A complex type that identifies the CloudWatch alarm that you want Amazon Route
	// 53 health checkers to use to determine whether the specified health check is
	// healthy.
	AlarmIdentifier *types.AlarmIdentifier

	// The port on the endpoint that you want Amazon Route 53 to perform health checks
	// on. Don't specify a value for Port when you specify a value for Type of
	// CLOUDWATCH_METRIC or CALCULATED.
	Port *int32

	// The path that you want Amazon Route 53 to request when performing health checks.
	// The path can be any value for which your endpoint will return an HTTP status
	// code of 2xx or 3xx when the endpoint is healthy, for example the file
	// /docs/route53-health-check.html. You can also include query string parameters,
	// for example, /welcome.html?language=jp&login=y. Specify this value only if you
	// want to change it.
	ResourcePath *string

	// Specify whether you want Amazon Route 53 to invert the status of a health check,
	// for example, to consider a health check unhealthy when it otherwise would be
	// considered healthy.
	Inverted *bool

	// Specify whether you want Amazon Route 53 to send the value of
	// FullyQualifiedDomainName to the endpoint in the client_hello message during TLS
	// negotiation. This allows the endpoint to respond to HTTPS health check requests
	// with the applicable SSL/TLS certificate. Some endpoints require that HTTPS
	// requests include the host name in the client_hello message. If you don't enable
	// SNI, the status of the health check will be SSL alert handshake_failure. A
	// health check can also have that status for other reasons. If SNI is enabled and
	// you're still getting the error, check the SSL/TLS configuration on your endpoint
	// and confirm that your certificate is valid. The SSL/TLS certificate on your
	// endpoint includes a domain name in the Common Name field and possibly several
	// more in the Subject Alternative Names field. One of the domain names in the
	// certificate should match the value that you specify for
	// FullyQualifiedDomainName. If the endpoint responds to the client_hello message
	// with a certificate that does not include the domain name that you specified in
	// FullyQualifiedDomainName, a health checker will retry the handshake. In the
	// second attempt, the health checker will omit FullyQualifiedDomainName from the
	// client_hello message.
	EnableSNI *bool

	// The number of consecutive health checks that an endpoint must pass or fail for
	// Amazon Route 53 to change the current status of the endpoint from unhealthy to
	// healthy or vice versa. For more information, see How Amazon Route 53 Determines
	// Whether an Endpoint Is Healthy
	// (https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// in the Amazon Route 53 Developer Guide. If you don't specify a value for
	// FailureThreshold, the default value is three health checks.
	FailureThreshold *int32

	// A complex type that contains one Region element for each region that you want
	// Amazon Route 53 health checkers to check the specified endpoint from.
	Regions []types.HealthCheckRegion

	// Amazon Route 53 behavior depends on whether you specify a value for IPAddress.
	// <note> <p>If a health check already has a value for <code>IPAddress</code>, you
	// can change the value. However, you can't update an existing health check to add
	// or remove the value of <code>IPAddress</code>. </p> </note> <p> <b>If you
	// specify a value for</b> <code>IPAddress</code>:</p> <p>Route 53 sends health
	// check requests to the specified IPv4 or IPv6 address and passes the value of
	// <code>FullyQualifiedDomainName</code> in the <code>Host</code> header for all
	// health checks except TCP health checks. This is typically the fully qualified
	// DNS name of the endpoint on which you want Route 53 to perform health
	// checks.</p> <p>When Route 53 checks the health of an endpoint, here is how it
	// constructs the <code>Host</code> header:</p> <ul> <li> <p>If you specify a value
	// of <code>80</code> for <code>Port</code> and <code>HTTP</code> or
	// <code>HTTP_STR_MATCH</code> for <code>Type</code>, Route 53 passes the value of
	// <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code>
	// header.</p> </li> <li> <p>If you specify a value of <code>443</code> for
	// <code>Port</code> and <code>HTTPS</code> or <code>HTTPS_STR_MATCH</code> for
	// <code>Type</code>, Route 53 passes the value of
	// <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code>
	// header.</p> </li> <li> <p>If you specify another value for <code>Port</code> and
	// any value except <code>TCP</code> for <code>Type</code>, Route 53 passes <i>
	// <code>FullyQualifiedDomainName</code>:<code>Port</code> </i> to the endpoint in
	// the <code>Host</code> header.</p> </li> </ul> <p>If you don't specify a value
	// for <code>FullyQualifiedDomainName</code>, Route 53 substitutes the value of
	// <code>IPAddress</code> in the <code>Host</code> header in each of the above
	// cases.</p> <p> <b>If you don't specify a value for</b>
	// <code>IPAddress</code>:</p> <p>If you don't specify a value for
	// <code>IPAddress</code>, Route 53 sends a DNS request to the domain that you
	// specify in <code>FullyQualifiedDomainName</code> at the interval you specify in
	// <code>RequestInterval</code>. Using an IPv4 address that is returned by DNS,
	// Route 53 then checks the health of the endpoint.</p> <note> <p>If you don't
	// specify a value for <code>IPAddress</code>, Route 53 uses only IPv4 to send
	// health checks to the endpoint. If there's no resource record set with a type of
	// A for the name that you specify for <code>FullyQualifiedDomainName</code>, the
	// health check fails with a "DNS resolution failed" error.</p> </note> <p>If you
	// want to check the health of weighted, latency, or failover resource record sets
	// and you choose to specify the endpoint only by
	// <code>FullyQualifiedDomainName</code>, we recommend that you create a separate
	// health check for each endpoint. For example, create a health check for each HTTP
	// server that is serving content for www.example.com. For the value of
	// <code>FullyQualifiedDomainName</code>, specify the domain name of the server
	// (such as <code>us-east-2-www.example.com</code>), not the name of the resource
	// record sets (www.example.com).</p> <important> <p>In this configuration, if the
	// value of <code>FullyQualifiedDomainName</code> matches the name of the resource
	// record sets and you then associate the health check with those resource record
	// sets, health check results will be unpredictable.</p> </important> <p>In
	// addition, if the value of <code>Type</code> is <code>HTTP</code>,
	// <code>HTTPS</code>, <code>HTTP_STR_MATCH</code>, or
	// <code>HTTPS_STR_MATCH</code>, Route 53 passes the value of
	// <code>FullyQualifiedDomainName</code> in the <code>Host</code> header, as it
	// does when you specify a value for <code>IPAddress</code>. If the value of
	// <code>Type</code> is <code>TCP</code>, Route 53 doesn't pass a <code>Host</code>
	// header.</p>
	FullyQualifiedDomainName *string

	// When CloudWatch has insufficient data about the metric to determine the alarm
	// state, the status that you want Amazon Route 53 to assign to the health check:
	//
	//
	// * Healthy: Route 53 considers the health check to be healthy.
	//
	//     * Unhealthy:
	// Route 53 considers the health check to be unhealthy.
	//
	//     * LastKnownStatus:
	// Route 53 uses the status of the health check from the last time CloudWatch had
	// sufficient data to determine the alarm state. For new health checks that have no
	// last known status, the default status for the health check is healthy.
	InsufficientDataHealthStatus types.InsufficientDataHealthStatus

	// If the value of Type is HTTP_STR_MATCH or HTTPS_STR_MATCH, the string that you
	// want Amazon Route 53 to search for in the response body from the specified
	// resource. If the string appears in the response body, Route 53 considers the
	// resource healthy. (You can't change the value of Type when you update a health
	// check.)
	SearchString *string

	// The ID for the health check for which you want detailed information. When you
	// created the health check, CreateHealthCheck returned the ID in the response, in
	// the HealthCheckId element.
	//
	// This member is required.
	HealthCheckId *string

	// A sequential counter that Amazon Route 53 sets to 1 when you create a health
	// check and increments by 1 each time you update settings for the health check. We
	// recommend that you use GetHealthCheck or ListHealthChecks to get the current
	// value of HealthCheckVersion for the health check that you want to update, and
	// that you include that value in your UpdateHealthCheck request. This prevents
	// Route 53 from overwriting an intervening update:
	//
	//     * If the value in the
	// UpdateHealthCheck request matches the value of HealthCheckVersion in the health
	// check, Route 53 updates the health check with the new settings.
	//
	//     * If the
	// value of HealthCheckVersion in the health check is greater, the health check was
	// changed after you got the version number. Route 53 does not update the health
	// check, and it returns a HealthCheckVersionMismatch error.
	HealthCheckVersion *int64

	// The number of child health checks that are associated with a CALCULATED health
	// that Amazon Route 53 must consider healthy for the CALCULATED health check to be
	// considered healthy. To specify the child health checks that you want to
	// associate with a CALCULATED health check, use the ChildHealthChecks and
	// ChildHealthCheck elements. Note the following:
	//
	//     * If you specify a number
	// greater than the number of child health checks, Route 53 always considers this
	// health check to be unhealthy.
	//
	//     * If you specify 0, Route 53 always considers
	// this health check to be healthy.
	HealthThreshold *int32

	// A complex type that contains one ResettableElementName element for each element
	// that you want to reset to the default value. Valid values for
	// ResettableElementName include the following:
	//
	//     * ChildHealthChecks: Amazon
	// Route 53 resets ChildHealthChecks
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_HealthCheckConfig.html#Route53-Type-HealthCheckConfig-ChildHealthChecks)
	// to null.
	//
	//     * FullyQualifiedDomainName: Route 53 resets
	// FullyQualifiedDomainName
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_UpdateHealthCheck.html#Route53-UpdateHealthCheck-request-FullyQualifiedDomainName).
	// to null.
	//
	//     * Regions: Route 53 resets the Regions
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_HealthCheckConfig.html#Route53-Type-HealthCheckConfig-Regions)
	// list to the default set of regions.
	//
	//     * ResourcePath: Route 53 resets
	// ResourcePath
	// (https://docs.aws.amazon.com/Route53/latest/APIReference/API_HealthCheckConfig.html#Route53-Type-HealthCheckConfig-ResourcePath)
	// to null.
	ResetElements []types.ResettableElementName

	// A complex type that contains one ChildHealthCheck element for each health check
	// that you want to associate with a CALCULATED health check.
	ChildHealthChecks []*string
}

A complex type that contains information about a request to update a health check.

type UpdateHealthCheckOutput 

type UpdateHealthCheckOutput struct {

	// A complex type that contains the response to an UpdateHealthCheck request.
	//
	// This member is required.
	HealthCheck *types.HealthCheck

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to the UpdateHealthCheck request.

type UpdateHostedZoneCommentInput 

type UpdateHostedZoneCommentInput struct {

	// The ID for the hosted zone that you want to update the comment for.
	//
	// This member is required.
	Id *string

	// The new comment for the hosted zone. If you don't specify a value for Comment,
	// Amazon Route 53 deletes the existing value of the Comment element, if any.
	Comment *string
}

A request to update the comment for a hosted zone.

type UpdateHostedZoneCommentOutput 

type UpdateHostedZoneCommentOutput struct {

	// A complex type that contains the response to the UpdateHostedZoneComment
	// request.
	//
	// This member is required.
	HostedZone *types.HostedZone

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response to the UpdateHostedZoneComment request.

type UpdateTrafficPolicyCommentInput 

type UpdateTrafficPolicyCommentInput struct {

	// The value of Version for the traffic policy that you want to update the comment
	// for.
	//
	// This member is required.
	Version *int32

	// The new comment for the specified traffic policy and version.
	//
	// This member is required.
	Comment *string

	// The value of Id for the traffic policy that you want to update the comment for.
	//
	// This member is required.
	Id *string
}

A complex type that contains information about the traffic policy that you want to update the comment for.

type UpdateTrafficPolicyCommentOutput 

type UpdateTrafficPolicyCommentOutput struct {

	// A complex type that contains settings for the specified traffic policy.
	//
	// This member is required.
	TrafficPolicy *types.TrafficPolicy

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains the response information for the traffic policy.

type UpdateTrafficPolicyInstanceInput 

type UpdateTrafficPolicyInstanceInput struct {

	// The TTL that you want Amazon Route 53 to assign to all of the updated resource
	// record sets.
	//
	// This member is required.
	TTL *int64

	// The ID of the traffic policy that you want Amazon Route 53 to use to update
	// resource record sets for the specified traffic policy instance.
	//
	// This member is required.
	TrafficPolicyId *string

	// The version of the traffic policy that you want Amazon Route 53 to use to update
	// resource record sets for the specified traffic policy instance.
	//
	// This member is required.
	TrafficPolicyVersion *int32

	// The ID of the traffic policy instance that you want to update.
	//
	// This member is required.
	Id *string
}

A complex type that contains information about the resource record sets that you want to update based on a specified traffic policy instance.

type UpdateTrafficPolicyInstanceOutput 

type UpdateTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the updated traffic policy instance.
	//
	// This member is required.
	TrafficPolicyInstance *types.TrafficPolicyInstance

	// Metadata pertaining to the operation's result.
	ResultMetadata middleware.Metadata
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy.

Source Files

View all Source files

Directories

Path Synopsis
internal
endpoints

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.