charts-syncer

command module
v0.20.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Nov 15, 2023 License: Apache-2.0 Imports: 4 Imported by: 0

README

CircleCI

charts-syncer

Sync chart packages and associated container images between chart repositories

Table of Contents

Usage

Sync all Helm Charts
$ charts-syncer sync
Sync Helm Charts from a specific date
$ charts-syncer sync --from-date 2020-05-15
Sync latest version of each Helm Chart
$ charts-syncer sync --latest-version-only

Advanced Usage

Sync Helm Charts and Container Images

By default, charts-syncer only sync Helm Charts packages, it does not copy the container images referenced by the chart. This feature can be enabled by setting the relocateContainerImages: true property in the config file i.e

# leverage .relok8s-images.yaml file inside the Charts to move the container images too
relocateContainerImages: true
source:
   ...
target:
   ...

In order for this option to work it is required that the source Helm Charts includes a .relok8s-images.yaml file with information about where to find the images inside chart. For more information about this file please refer to asset-relocation-tool-for-kubernetes readme.

Sync Helm Charts and associated container images between disconnected environments

There are scenarios where the source and target Helm Charts repositories are not reachable at the same time from the same location.

For those cases, charts-syncer supports a two steps relocation for offline Chart and container images transport, check the air gap docs.

Configuration

Below you can find an example configuration file. To know all the available configuration keys see the charts-syncer file as it includes explanatory comments for each configuration key.

#
# Example config file
#
source:
  repo:
    kind: HELM
    url: http://localhost:8080
    # Helm repository authentication, same for other repo types i.e OCI
    # auth:
    #   username: "USERNAME"
    #   password: "PASSWORD"
  # Container images registry authn
  # containers:
  #  auth:
  #     registry: 'REGISTRY'
  #     username: "USERNAME"
  #     password: "PASSWORD"
target:
  repoName: myrepo
  containerRegistry: k8s.container.registry.io
  containerRepository: repository/demo/k8s
  # Container images registry authn
  # containers:
  #   auth:
  #     username: "USERNAME"
  #     password: "PASSWORD"
  repo:
    kind: CHARTMUSEUM
    url: http://localhost:9090
    # Helm repository authentication
    # auth:
    #   username: "USERNAME"
    #   password: "PASSWORD"
charts:
  - redis
  - mariadb
# opt-out counterpart of "charts" property that explicit list the Helm charts to be skipped 
# either "charts" or "skipCharts" can be used at once
# skipCharts:
#  - mariadb

Note that the repo.url property you need to specify is the same one you would use to add the repo to helm with the helm repo add command.

Example: helm repo add bitnami https://charts.bitnami.com/bitnami.

Credentials for the Helm Chart repositories and container images registries can be provided using config file or the following environment variables:

Helm Chart repositories

  • SOURCE_REPO_AUTH_USERNAME

  • SOURCE_REPO_AUTH_PASSWORD

  • TARGET_REPO_AUTH_USERNAME

  • TARGET_REPO_AUTH_PASSWORD

Container images registries

  • SOURCE_CONTAINERS_AUTH_REGISTRY

  • SOURCE_CONTAINERS_AUTH_USERNAME

  • SOURCE_CONTAINERS_AUTH_PASSWORD

  • TARGET_CONTAINERS_AUTH_USERNAME

  • TARGET_CONTAINERS_AUTH_PASSWORD

Current available Kinds are HELM, CHARTMUSEUM, HARBOR and OCI. Below you can find the compatibility matrix between source and targets repositories.

Source Repo Target Repo Supported
HELM HELM ❌
HELM CHARTMUSEUM ✅
HELM HARBOR ✅
HELM OCI ✅
HELM LOCAL ✅
CHARTMUSEUM HELM ❌
CHARTMUSEUM CHARTMUSEUM ✅
CHARTMUSEUM HARBOR ✅
CHARTMUSEUM OCI ✅
CHARTMUSEUM LOCAL ✅
HARBOR HELM ❌
HARBOR CHARTMUSEUM ✅
HARBOR HARBOR ✅
HARBOR OCI ✅
HARBOR LOCAL ✅
OCI HELM ❌
OCI CHARTMUSEUM ✅
OCI HARBOR ✅
OCI OCI ✅
OCI LOCAL ✅
LOCAL HELM ❌
LOCAL CHARTMUSEUM ✅
LOCAL HARBOR ✅
LOCAL OCI ✅
LOCAL LOCAL ✅

The list of charts in the config file is optional except for OCI repositories used as source. The rest of chart repositories kinds already support autodiscovery.

Harbor example

In the case of HARBOR kind repos, be aware that chart repository URLs are:

https://$HARBOR_DOMAIN/chartrepo/$HARBOR_PROJECT

So if HARBOR_DOMAIN=my.harbor.com and HARBOR_PROJECT=my-project, you would need to specify this repo in the config file like:

target:
 repo:
   kind: HARBOR
   url: https://my.harbor.com/chartrepo/my-project
OCI example

Since Harbor 2.0.0, there are two ways of storing charts. The legacy one uses chartmuseum under the hood and it corresponds to the HARBOR kind of this project. The new one however uses OCI to store helm charts as OCI artifacts. In case you are using Harbor with OCI backend you can use the following example:

target:
 repo:
   kind: OCI
   url: https://my.harbor.com/my-project/subpath

subpath in the previous url is optional in case your charts are not stored directly under your projects. It is worth mentioning that you can use Harbor robot accounts using OCI registries as source or target.

Also, take into account that if you use OCI as the source repository you must specify the list of charts to synchronize or a pointer to a charts index file in the repository.

Charts index for OCI-based repositories

By using a charts index file for OCI-Based repository you won't need to maintain a hardcoded list of chart names in the config file. charts-syncer will be able to auto-discover what charts need to be synchronized.

By default, the library will look up for a "charts-index:latest" charts index artifact within the source OCI repository.

However, this can be customized using the chartsIndex field using the format REGISTRY/PROJECT/[SUBPATH][:TAG|@sha256:DIGEST].

For example, if your URL is https://my-oci-registry.io/my-project/subpath and no chartsIndex is specified, charts-syncer will try to use my-oci-registry.io/my-project/subpath/charts-index:latest asset as index if it exists.

An example of the valid index format can be seen directly in its Protobuf definition. Worth to mention that the format of the charts index for OCI repositories is a custom one, not a traditional Helm index file.

source:
 repo:
   kind: OCI
   url: https://my-oci-registry.io/my-project/subpath
   # disableChartsIndex: true
   # Charts index location override, charts-index:latest by default
   chartsIndex: my-oci-registry.io/my-project/my-custom-index:prod

Finally, if no charts index is found, charts-syncer will require the list of charts in the config file:

source:
  repo:
    kind: OCI
    url: https://my-oci-registry.io/my-project/subpath
...
# Required if no index is provided or found
charts:
  - redis
  - mariadb
  - ...
Amazon Elastic Container Registry (ECR)

Amazon Elastic Container Registry (ECR) is an OCI registry, but it has two peculiarities that should be taken into account when interacting with charts-syncer.

The first peculiarity relates to authentication, usually you would have an IAM user with access_key_id and secret_access_key credentials. These are not the credentials that should be entered in the config file. To obtain the proper credentials, you need to obtain a temporary password to operate the ECR registry. By using the following command, you can get the password:

$ aws ecr get-login-password --region REGION

In the previous command remember to update the REGION placeholder by a proper value. The username will always be AWS.

The second peculiarity only affects when using ECR as a target registry since you need to create the repositories in advance. If the repositories don't exist when executing charts-syncer you will get an error like the following:

failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/common/blobs/uploads/": EOF
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/apache/blobs/uploads/": EOF
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/mariadb/blobs/uploads/": EOF
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/mysql/blobs/uploads/": EOF
failed to do request: Post "https://AWS_ACCOUNT.dkr.ecr.AWS_REGION.amazonaws.com/v2/charts-syncer-test/charts/redis/blobs/uploads/": EOF

In that case make sure all the missing repositories are created before executing charts-syner again. Please refer to AWS documentation to see how to do it.

LOCAL example

In case charts-syncer is not able to directly push the modified charts to the desired target, it would be possible to sync the charts to a local folder using the LOCAL target kind and then use any other tool or process to upload these charts to the final charts repository.

target:
 repo:
   kind: LOCAL
   path: your_local_path

Requirements

In order for this tool to be able to successfully migrate a chart from a source repository to another it must fulfill the following requirements:

  • The images used by the chart must be specified in the following way in the values.yaml file:
image:
  registry: docker.io
  repository: bitnami/ghost
  tag: 3.22.2-debian-10-r0

The parent section name does not matter. In the previous example, instead of image it could be mainImage or whatever other name.

The important thing is that the image name is specified with registry, repository and tag.

The values of the parameters containerRegistry and containerRepositories from the configuration file will be used to update the registry and repository properties in the values.yaml. If these parameters are unset, the associated properties won't be modified. The tag property remains unchanged.

⚠ Be aware that this tool expects the images to be already present in the target container registry.

Changes performed in a chart

In order to migrate a chart from one repository to another and retrieve the images from a new container registry, this tool performs the following changes in the chart code:

Update values.yaml and values-production.yaml (if exists)

These files are updated with the new container registry where the chart should pull the images from.

Update dependencies files

For Helm v2, these files are requirements.yaml and requirements.lock. For Helm v3, these files are Chart.yaml and Chart.lock

If the chart has any dependency, they should be registered in these files that will be updated to retrieve the dependencies from the target repository.

Update README.md

README files for bitnami charts include a TL;DR; section with instructions to add the helm repository to the helm CLI and a simple command to deploy the chart.

As the chart repository URL and chart repository name should have changed, the instructions in the README should be updated too.

Let's see the performed changes with an example. Imagine I sync the Ghost chart from the Bitnami chart repo to a local chartmuseum repo with no authentication.

I would use this config file:

source:
  repo:
    kind: HELM
    url: https://charts.bitnami.com/bitnami
target:
  repoName: myrepo
  containerRegistry: "my.registry.io"
  containerRepository: "test"
  repo:
    kind: CHARTMUSEUM
    url: http://localhost:8080

After executing the tool, these are the changes performed to the following files:

values.yaml
diff --git a/values.yaml b/values.yaml
index dff53b1..a9d5884 100755
--- a/values.yaml
+++ b/values.yaml
@@ -12,8 +12,8 @@
 ## ref: https://hub.docker.com/r/bitnami/ghost/tags/
 ##
 image:
-  registry: docker.io
-  repository: bitnami/ghost
+  registry: my.registry.io
+  repository: test/ghost
   tag: 3.22.2-debian-10-r0
   ## Specify a imagePullPolicy
   ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
@@ -40,8 +40,8 @@ image:
 ##
 volumePermissions:
   image:
-    registry: docker.io
-    repository: bitnami/minideb
+    registry: my.registry.io
+    repository: test/minideb
     tag: buster
     pullPolicy: Always
     ## Optionally specify an array of imagePullSecrets.
requirements.lock (only for Helm v2 charts)
diff --git a/requirements.lock b/requirements.lock
index ae8a2c5..ea23e53 100755
--- a/requirements.lock
+++ b/requirements.lock
@@ -1,9 +1,9 @@
 dependencies:
 - name: common
-  repository: https://charts.bitnami.com/bitnami
+  repository: http://localhost:8080
   version: 0.3.1
 - name: mariadb
-  repository: https://charts.bitnami.com/bitnami
+  repository: http://localhost:8080
   version: 7.6.1
-digest: sha256:9893236041ef5bdf2e972db020e72e8d68100eac4e280b9066d6e16c4061bcb3
-generated: "2020-07-06T18:13:45.662082005Z"
+digest: sha256:fbd22a3fc7b93ce6875a37902a3c8ccbb5dd3db2611ec9860b99e49d9f23196e
+generated: "2020-07-07T12:57:28.573258+02:00"
Chart.lock (only for Helm v3 charts)
diff --git a/Chart.lock b/Chart.lock
index ae1c198..eeed9a7 100644
--- a/Chart.lock
+++ b/Chart.lock
@@ -1,6 +1,6 @@
 dependencies:
 - name: zookeeper
-  repository: https://charts.bitnami.com/bitnami
+  repository: http://127.0.0.1:8080
   version: 5.21.9
-digest: sha256:3157eeec51b30e4011b34043df2dfac383a4bd11f76c85d07f54414a21dffc19
-generated: "2020-09-29T12:51:56.872354+02:00"
+digest: sha256:8aef6388d327cdf9b8f5714aadfe8112b2e2ff53494e86dbd42946d742d33ff0
+generated: "2020-09-30T16:15:20.548388+02:00"
README.md
diff --git a/README.md b/README.md
index 3fa7d7b..504894e 100755
--- a/README.md
+++ b/README.md
@@ -5,8 +5,8 @@
 ## TL;DR;

 ```console
-$ helm repo add bitnami https://charts.bitnami.com/bitnami
-$ helm install my-release bitnami/ghost
+$ helm repo add myrepo http://localhost:8080
+$ helm install my-release myrepo/ghost
 ```

 ## Introduction
@@ -29,7 +29,7 @@ Bitnami charts can be used with [Kubeapps](https://kubeapps.com/) for deployment
 To install the chart with the release name `my-release`:

 ```console
-$ helm install my-release bitnami/ghost
+$ helm install my-release myrepo/ghost
 ```

 The command deploys Ghost on the Kubernetes cluster in the default configuration. The [Parameters](#parameters) section lists the parameters that can be configured during installation.
@@ -168,7 +168,7 @@ Specify each parameter using the `--set key=value[,key=value]` argument to `helm
 ```console
 $ helm install my-release \
   --set ghostUsername=admin,ghostPassword=password,mariadb.mariadbRootPassword=secretpassword \
-    bitnami/ghost
+    myrepo/ghost
 ```

 The above command sets the Ghost administrator account username and password to `admin` and `password` respectively. Additionally, it sets the MariaDB `root` user password to `secretpassword`.
@@ -176,7 +176,7 @@ The above command sets the Ghost administrator account username and password to
 Alternatively, a YAML file that specifies the values for the above parameters can be provided while installing the chart. For example,

 ```console
-$ helm install my-release -f values.yaml bitnami/ghost
+$ helm install my-release -f values.yaml myrepo/ghost
 ```

In order to obtain these diffs check the developer docs.

Deploy to Kubernetes

Visit this guide to deploy a Kubernetes CronJob that will keep two Helm Chart repositories synced.

How to build

Check the developer docs.

License

Copyright © 2023 VMware, Inc.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License.

You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Documentation

The Go Gopher

There is no documentation for this package.

Source Files

View all Source files

Directories

Path Synopsis
Package api provides APIs for syncing a chart repository
 Package api provides APIs for syncing a chart repository
internal
cache
cache/cachedisk
chart
config
indexer
indexer/api
Package api provides APIs to index charts
 Package api provides APIs to index charts
utils
pkg
client
client/intermediate
client/repo
client/repo/chartmuseum
client/repo/harbor
client/repo/helmclassic
client/repo/local
client/repo/oci
client/types
syncer

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.