getter

package module
v1.5.4-0...-85c6037 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 21, 2021 License: MPL-2.0 Imports: 49 Imported by: 0

README

go-getter

CircleCI Go Documentation

go-getter is a library for Go (golang) for downloading files or directories from various sources using a URL as the primary form of input.

The power of this library is being flexible in being able to download from a number of different sources (file paths, Git, HTTP, Mercurial, etc.) using a single string as input. This removes the burden of knowing how to download from a variety of sources from the implementer.

The concept of a detector automatically turns invalid URLs into proper URLs. For example: "github.com/hashicorp/go-getter" would turn into a Git URL. Or "./foo" would turn into a file URL. These are extensible.

This library is used by Terraform for downloading modules and Nomad for downloading binaries.

Installation and Usage

Package documentation can be found on GoDoc.

Installation can be done with a normal go get:

$ go get github.com/hashicorp/go-getter

go-getter also has a command you can use to test URL strings:

$ go install github.com/hashicorp/go-getter/cmd/go-getter
...

$ go-getter github.com/foo/bar ./foo
...

The command is useful for verifying URL structures.

URL Format

go-getter uses a single string URL as input to download from a variety of protocols. go-getter has various "tricks" with this URL to do certain things. This section documents the URL format.

Supported Protocols and Detectors

Protocols are used to download files/directories using a specific mechanism. Example protocols are Git and HTTP.

Detectors are used to transform a valid or invalid URL into another URL if it matches a certain pattern. Example: "github.com/user/repo" is automatically transformed into a fully valid Git URL. This allows go-getter to be very user friendly.

go-getter out of the box supports the following protocols. Additional protocols can be augmented at runtime by implementing the Getter interface.

  • Local files
  • Git
  • Mercurial
  • HTTP
  • Amazon S3
  • Google GCP

In addition to the above protocols, go-getter has what are called "detectors." These take a URL and attempt to automatically choose the best protocol for it, which might involve even changing the protocol. The following detection is built-in by default:

  • File paths such as "./foo" are automatically changed to absolute file URLs.
  • GitHub URLs, such as "github.com/mitchellh/vagrant" are automatically changed to Git protocol over HTTP.
  • GitLab URLs, such as "gitlab.com/inkscape/inkscape" are automatically changed to Git protocol over HTTP.
  • BitBucket URLs, such as "bitbucket.org/mitchellh/vagrant" are automatically changed to a Git or mercurial protocol using the BitBucket API.
Forced Protocol

In some cases, the protocol to use is ambiguous depending on the source URL. For example, "http://github.com/mitchellh/vagrant.git" could reference an HTTP URL or a Git URL. Forced protocol syntax is used to disambiguate this URL.

Forced protocol can be done by prefixing the URL with the protocol followed by double colons. For example: git::http://github.com/mitchellh/vagrant.git would download the given HTTP URL using the Git protocol.

Forced protocols will also override any detectors.

In the absence of a forced protocol, detectors may be run on the URL, transforming the protocol anyways. The above example would've used the Git protocol either way since the Git detector would've detected it was a GitHub URL.

Protocol-Specific Options

Each protocol can support protocol-specific options to configure that protocol. For example, the git protocol supports specifying a ref query parameter that tells it what ref to checkout for that Git repository.

The options are specified as query parameters on the URL (or URL-like string) given to go-getter. Using the Git example above, the URL below is a valid input to go-getter:

github.com/hashicorp/go-getter?ref=abcd1234

The protocol-specific options are documented below the URL format section. But because they are part of the URL, we point it out here so you know they exist.

Subdirectories

If you want to download only a specific subdirectory from a downloaded directory, you can specify a subdirectory after a double-slash //. go-getter will first download the URL specified before the double-slash (as if you didn't specify a double-slash), but will then copy the path after the double slash into the target directory.

For example, if you're downloading this GitHub repository, but you only want to download the testdata directory, you can do the following:

https://github.com/hashicorp/go-getter.git//testdata

If you downloaded this to the /tmp directory, then the file /tmp/archive.gz would exist. Notice that this file is in the testdata directory in this repository, but because we specified a subdirectory, go-getter automatically copied only that directory contents.

Subdirectory paths may also use filesystem glob patterns. The path must match exactly one entry or go-getter will return an error. This is useful if you're not sure the exact directory name but it follows a predictable naming structure.

For example, the following URL would also work:

https://github.com/hashicorp/go-getter.git//test-*
Checksumming

For file downloads of any protocol, go-getter can automatically verify a checksum for you. Note that checksumming only works for downloading files, not directories, but checksumming will work for any protocol.

To checksum a file, append a checksum query parameter to the URL. go-getter will parse out this query parameter automatically and use it to verify the checksum. The parameter value can be in the format of type:value or just value, where type is "md5", "sha1", "sha256", "sha512" or "file" . The "value" should be the actual checksum value or download URL for "file". When type part is omitted, type will be guessed based on the length of the checksum string. Examples:

./foo.txt?checksum=md5:b7d96c89d09d9e204f5fedc4d5d55b21
./foo.txt?checksum=b7d96c89d09d9e204f5fedc4d5d55b21
./foo.txt?checksum=file:./foo.txt.sha256sum

When checksumming from a file - ex: with checksum=file:url - go-getter will get the file linked in the URL after file: using the same configuration. For example, in file:http://releases.ubuntu.com/cosmic/MD5SUMS go-getter will download a checksum file under the aforementioned url using the http protocol. All protocols supported by go-getter can be used. The checksum file will be downloaded in a temporary file then parsed. The destination of the temporary file can be changed by setting system specific environment variables: TMPDIR for unix; TMP, TEMP or USERPROFILE on windows. Read godoc of os.TempDir for more information on the temporary directory selection. Content of files are expected to be BSD or GNU style. Once go-getter is done with the checksum file; it is deleted.

The checksum query parameter is never sent to the backend protocol implementation. It is used at a higher level by go-getter itself.

If the destination file exists and the checksums match: download will be skipped.

Unarchiving

go-getter will automatically unarchive files into a file or directory based on the extension of the file being requested (over any protocol). This works for both file and directory downloads.

go-getter looks for an archive query parameter to specify the format of the archive. If this isn't specified, go-getter will use the extension of the path to see if it appears archived. Unarchiving can be explicitly disabled by setting the archive query parameter to false.

The following archive formats are supported:

  • tar.gz and tgz
  • tar.bz2 and tbz2
  • tar.xz and txz
  • zip
  • gz
  • bz2
  • xz

For example, an example URL is shown below:

./foo.zip

This will automatically be inferred to be a ZIP file and will be extracted. You can also be explicit about the archive type:

./some/other/path?archive=zip

And finally, you can disable archiving completely:

./some/path?archive=false

You can combine unarchiving with the other features of go-getter such as checksumming. The special archive query parameter will be removed from the URL before going to the final protocol downloader.

Protocol-Specific Options

This section documents the protocol-specific options that can be specified for go-getter. These options should be appended to the input as normal query parameters (HTTP headers are an exception to this, however). Depending on the usage of go-getter, applications may provide alternate ways of inputting options. For example, Nomad provides a nice options block for specifying options rather than in the URL.

General (All Protocols)

The options below are available to all protocols:

  • archive - The archive format to use to unarchive this file, or "" (empty string) to disable unarchiving. For more details, see the complete section on archive support above.

  • checksum - Checksum to verify the downloaded file or archive. See the entire section on checksumming above for format and more details.

  • filename - When in file download mode, allows specifying the name of the downloaded file on disk. Has no effect in directory mode.

Local Files (file)

None

Git (git)
  • ref - The Git ref to checkout. This is a ref, so it can point to a commit SHA, a branch name, etc. If it is a named ref such as a branch name, go-getter will update it to the latest on each get.

  • sshkey - An SSH private key to use during clones. The provided key must be a base64-encoded string. For example, to generate a suitable sshkey from a private key file on disk, you would run base64 -w0 <file>.

    Note: Git 2.3+ is required to use this feature.

  • depth - The Git clone depth. The provided number specifies the last n revisions to clone from the repository.

The git getter accepts both URL-style SSH addresses like git::ssh://git@example.com/foo/bar, and "scp-style" addresses like git::git@example.com/foo/bar. In the latter case, omitting the git:: force prefix is allowed if the username prefix is exactly git@.

The "scp-style" addresses cannot be used in conjunction with the ssh:// scheme prefix, because in that case the colon is used to mark an optional port number to connect on, rather than to delimit the path from the host.

Mercurial (hg)
  • rev - The Mercurial revision to checkout.
HTTP (http)
Basic Authentication

To use HTTP basic authentication with go-getter, simply prepend username:password@ to the hostname in the URL such as https://Aladdin:OpenSesame@www.example.com/index.html. All special characters, including the username and password, must be URL encoded.

Headers

Optional request headers can be added by supplying them in a custom HttpGetter (not as query parameters like most other options). These headers will be sent out on every request the getter in question makes.

S3 (s3)

S3 takes various access configurations in the URL. Note that it will also read these from standard AWS environment variables if they're set. S3 compliant servers like Minio are also supported. If the query parameters are present, these take priority.

  • aws_access_key_id - AWS access key.
  • aws_access_key_secret - AWS access key secret.
  • aws_access_token - AWS access token if this is being used.
  • aws_profile - Use this profile from local ~/.aws/ config. Takes priority over the other three.
Using IAM Instance Profiles with S3

If you use go-getter and want to use an EC2 IAM Instance Profile to avoid using credentials, then just omit these and the profile, if available will be used automatically.

Using S3 with Minio

If you use go-gitter for Minio support, you must consider the following:

  • aws_access_key_id (required) - Minio access key.
  • aws_access_key_secret (required) - Minio access key secret.
  • region (optional - defaults to us-east-1) - Region identifier to use.
  • version (optional - defaults to Minio default) - Configuration file format.
S3 Bucket Examples

S3 has several addressing schemes used to reference your bucket. These are listed here: http://docs.aws.amazon.com/AmazonS3/latest/dev/UsingBucket.html#access-bucket-intro

Some examples for these addressing schemes:

GCS (gcs)
GCS Authentication

In order to access to GCS, authentication credentials should be provided. More information can be found here

GCS Bucket Examples
GCS Testing

The tests for get_gcs.go require you to have GCP credentials set in your environment. These credentials can have any level of permissions to any project, they just need to exist. This means setting GOOGLE_APPLICATION_CREDENTIALS="~/path/to/credentials.json" or GOOGLE_CREDENTIALS="{stringified-credentials-json}". Due to this configuration, get_gcs_test.go will fail for external contributors in CircleCI.

Documentation

Overview

getter is a package for downloading files or directories from a variety of protocols.

getter is unique in its ability to download both directories and files. It also detects certain source strings to be protocol-specific URLs. For example, "github.com/hashicorp/go-getter" would turn into a Git URL and use the Git protocol.

Protocols and detectors are extensible.

To get started, see Client.

Index

Constants

This section is empty.

Variables

View Source
var Decompressors map[string]Decompressor

Decompressors is the mapping of extension to the Decompressor implementation that will decompress that extension/type.

View Source
var Detectors []Detector

Detectors is the list of detectors that are tried on an invalid URL. This is also the order they're tried (index 0 is first).

View Source
var Getters map[string]Getter

Getters is the mapping of scheme to the Getter implementation that will be used to get a dependency.

Functions

func Copy

func Copy(ctx context.Context, dst io.Writer, src io.Reader) (int64, error)

Copy is a io.Copy cancellable by context

func Detect

func Detect(src string, pwd string, ds []Detector) (string, error)

Detect turns a source string into another source string if it is detected to be of a known pattern.

The third parameter should be the list of detectors to use in the order to try them. If you don't want to configure this, just use the global Detectors variable.

This is safe to be called with an already valid source string: Detect will just return it.

func Get

func Get(dst, src string, opts ...ClientOption) error

Get downloads the directory specified by src into the folder specified by dst. If dst already exists, Get will attempt to update it.

src is a URL, whereas dst is always just a file path to a folder. This folder doesn't need to exist. It will be created if it doesn't exist.

func GetAny

func GetAny(dst, src string, opts ...ClientOption) error

GetAny downloads a URL into the given destination. Unlike Get or GetFile, both directories and files are supported.

dst must be a directory. If src is a file, it will be downloaded into dst with the basename of the URL. If src is a directory or archive, it will be unpacked directly into dst.

func GetFile

func GetFile(dst, src string, opts ...ClientOption) error

GetFile downloads the file specified by src into the path specified by dst.

func SourceDirSubdir

func SourceDirSubdir(src string) (string, string)

SourceDirSubdir takes a source URL and returns a tuple of the URL without the subdir and the subdir.

ex:

dom.com/path/?q=p               => dom.com/path/?q=p, ""
proto://dom.com/path//*?q=p     => proto://dom.com/path?q=p, "*"
proto://dom.com/path//path2?q=p => proto://dom.com/path?q=p, "path2"

func SubdirGlob

func SubdirGlob(dst, subDir string) (string, error)

SubdirGlob returns the actual subdir with globbing processed.

dst should be a destination directory that is already populated (the download is complete) and subDir should be the set subDir. If subDir is an empty string, this returns an empty string.

The returned path is the full absolute path.

func TestDecompressor

func TestDecompressor(t testing.T, d Decompressor, cases []TestDecompressCase)

TestDecompressor is a helper function for testing generic decompressors.

func WithContext

func WithContext(ctx context.Context) func(*Client) error

WithContext allows to pass a context to operation in order to be able to cancel a download in progress.

func WithInsecure

func WithInsecure() func(*Client) error

WithInsecure allows for a user to avoid checking certificates (not recommended). For example, when connecting on HTTPS where an invalid certificate is presented. User assumes all risk. Not all getters have support for insecure mode yet.

func WithProgress

func WithProgress(pl ProgressTracker) func(*Client) error

WithProgress allows for a user to track the progress of a download. For example by displaying a progress bar with current download. Not all getters have progress support yet.

Types

type BitBucketDetector

type BitBucketDetector struct{}

BitBucketDetector implements Detector to detect BitBucket URLs and turn them into URLs that the Git or Hg Getter can understand.

func (*BitBucketDetector) Detect

func (d *BitBucketDetector) Detect(src, _ string) (string, bool, error)

type Bzip2Decompressor

type Bzip2Decompressor struct{}

Bzip2Decompressor is an implementation of Decompressor that can decompress bz2 files.

func (*Bzip2Decompressor) Decompress

func (d *Bzip2Decompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

type ChecksumError

type ChecksumError struct {
	Hash     hash.Hash
	Actual   []byte
	Expected []byte
	File     string
}

A ChecksumError is returned when a checksum differs

func (*ChecksumError) Error

func (cerr *ChecksumError) Error() string

type Client

type Client struct {
	// Ctx for cancellation
	Ctx context.Context

	// Src is the source URL to get.
	//
	// Dst is the path to save the downloaded thing as. If Dir is set to
	// true, then this should be a directory. If the directory doesn't exist,
	// it will be created for you.
	//
	// Pwd is the working directory for detection. If this isn't set, some
	// detection may fail. Client will not default pwd to the current
	// working directory for security reasons.
	Src string
	Dst string
	Pwd string

	// Mode is the method of download the client will use. See ClientMode
	// for documentation.
	Mode ClientMode

	// Umask is used to mask file permissions when storing local files or decompressing
	// an archive
	Umask os.FileMode

	// Detectors is the list of detectors that are tried on the source.
	// If this is nil, then the default Detectors will be used.
	Detectors []Detector

	// Decompressors is the map of decompressors supported by this client.
	// If this is nil, then the default value is the Decompressors global.
	Decompressors map[string]Decompressor

	// Getters is the map of protocols supported by this client. If this
	// is nil, then the default Getters variable will be used.
	Getters map[string]Getter

	// Dir, if true, tells the Client it is downloading a directory (versus
	// a single file). This distinction is necessary since filenames and
	// directory names follow the same format so disambiguating is impossible
	// without knowing ahead of time.
	//
	// WARNING: deprecated. If Mode is set, that will take precedence.
	Dir bool

	// ProgressListener allows to track file downloads.
	// By default a no op progress listener is used.
	ProgressListener ProgressTracker

	// Insecure controls whether a client verifies the server's
	// certificate chain and host name. If Insecure is true, crypto/tls
	// accepts any certificate presented by the server and any host name in that
	// certificate. In this mode, TLS is susceptible to machine-in-the-middle
	// attacks unless custom verification is used. This should be used only for
	// testing or in combination with VerifyConnection or VerifyPeerCertificate.
	// This is identical to tls.Config.InsecureSkipVerify.
	Insecure bool

	Options []ClientOption
}

Client is a client for downloading things.

Top-level functions such as Get are shortcuts for interacting with a client. Using a client directly allows more fine-grained control over how downloading is done, as well as customizing the protocols supported.

func (*Client) ChecksumFromFile

func (c *Client) ChecksumFromFile(checksumFile string, src *url.URL) (*FileChecksum, error)

ChecksumFromFile will return all the FileChecksums found in file

ChecksumFromFile will try to guess the hashing algorithm based on content of checksum file

ChecksumFromFile will only return checksums for files that match file behind src

func (*Client) Configure

func (c *Client) Configure(opts ...ClientOption) error

Configure configures a client with options.

func (*Client) Get

func (c *Client) Get() error

Get downloads the configured source to the destination.

type ClientMode

type ClientMode uint

ClientMode is the mode that the client operates in.

const (
	ClientModeInvalid ClientMode = iota

	// ClientModeAny downloads anything it can. In this mode, dst must
	// be a directory. If src is a file, it is saved into the directory
	// with the basename of the URL. If src is a directory or archive,
	// it is unpacked directly into dst.
	ClientModeAny

	// ClientModeFile downloads a single file. In this mode, dst must
	// be a file path (doesn't have to exist). src must point to a single
	// file. It is saved as dst.
	ClientModeFile

	// ClientModeDir downloads a directory. In this mode, dst must be
	// a directory path (doesn't have to exist). src must point to an
	// archive or directory (such as in s3).
	ClientModeDir
)

type ClientOption

type ClientOption func(*Client) error

A ClientOption allows to configure a client

type Decompressor

type Decompressor interface {
	// Decompress should decompress src to dst. dir specifies whether dst
	// is a directory or single file. src is guaranteed to be a single file
	// that exists. dst is not guaranteed to exist already.
	Decompress(dst, src string, dir bool, umask os.FileMode) error
}

Decompressor defines the interface that must be implemented to add support for decompressing a type.

Important: if you're implementing a decompressor, please use the containsDotDot helper in this file to ensure that files can't be decompressed outside of the specified directory.

type Detector

type Detector interface {
	// Detect will detect whether the string matches a known pattern to
	// turn it into a proper URL.
	Detect(string, string) (string, bool, error)
}

Detector defines the interface that an invalid URL or a URL with a blank scheme is passed through in order to determine if its shorthand for something else well-known.

type FileChecksum

type FileChecksum struct {
	Type     string
	Hash     hash.Hash
	Value    []byte
	Filename string
}

FileChecksum helps verifying the checksum for a file.

type FileDetector

type FileDetector struct{}

FileDetector implements Detector to detect file paths.

func (*FileDetector) Detect

func (d *FileDetector) Detect(src, pwd string) (string, bool, error)

type FileGetter

type FileGetter struct {

	// Copy, if set to true, will copy data instead of using a symlink. If
	// false, attempts to symlink to speed up the operation and to lower the
	// disk space usage. If the symlink fails, may attempt to copy on windows.
	Copy bool
	// contains filtered or unexported fields
}

FileGetter is a Getter implementation that will download a module from a file scheme.

func (*FileGetter) ClientMode

func (g *FileGetter) ClientMode(u *url.URL) (ClientMode, error)

func (*FileGetter) Context

func (g *FileGetter) Context() context.Context

Context tries to returns the Contex from the getter's client. otherwise context.Background() is returned.

func (*FileGetter) Get

func (g *FileGetter) Get(dst string, u *url.URL) error

func (*FileGetter) GetFile

func (g *FileGetter) GetFile(dst string, u *url.URL) error

func (*FileGetter) SetClient

func (g *FileGetter) SetClient(c *Client)

type FolderStorage

type FolderStorage struct {
	// StorageDir is the directory where the modules will be stored.
	StorageDir string
}

FolderStorage is an implementation of the Storage interface that manages modules on the disk.

func (*FolderStorage) Dir

func (s *FolderStorage) Dir(key string) (d string, e bool, err error)

Dir implements Storage.Dir

func (*FolderStorage) Get

func (s *FolderStorage) Get(key string, source string, update bool) error

Get implements Storage.Get

type GCSDetector

type GCSDetector struct{}

GCSDetector implements Detector to detect GCS URLs and turn them into URLs that the GCSGetter can understand.

func (*GCSDetector) Detect

func (d *GCSDetector) Detect(src, _ string) (string, bool, error)

type GCSGetter

type GCSGetter struct {
	// contains filtered or unexported fields
}

GCSGetter is a Getter implementation that will download a module from a GCS bucket.

func (*GCSGetter) ClientMode

func (g *GCSGetter) ClientMode(u *url.URL) (ClientMode, error)

func (*GCSGetter) Context

func (g *GCSGetter) Context() context.Context

Context tries to returns the Contex from the getter's client. otherwise context.Background() is returned.

func (*GCSGetter) Get

func (g *GCSGetter) Get(dst string, u *url.URL) error

func (*GCSGetter) GetFile

func (g *GCSGetter) GetFile(dst string, u *url.URL) error

func (*GCSGetter) SetClient

func (g *GCSGetter) SetClient(c *Client)

type Getter

type Getter interface {
	// Get downloads the given URL into the given directory. This always
	// assumes that we're updating and gets the latest version that it can.
	//
	// The directory may already exist (if we're updating). If it is in a
	// format that isn't understood, an error should be returned. Get shouldn't
	// simply nuke the directory.
	Get(string, *url.URL) error

	// GetFile downloads the give URL into the given path. The URL must
	// reference a single file. If possible, the Getter should check if
	// the remote end contains the same file and no-op this operation.
	GetFile(string, *url.URL) error

	// ClientMode returns the mode based on the given URL. This is used to
	// allow clients to let the getters decide which mode to use.
	ClientMode(*url.URL) (ClientMode, error)

	// SetClient allows a getter to know it's client
	// in order to access client's Get functions or
	// progress tracking.
	SetClient(*Client)
}

Getter defines the interface that schemes must implement to download things.

type GitDetector

type GitDetector struct{}

GitDetector implements Detector to detect Git SSH URLs such as git@host.com:dir1/dir2 and converts them to proper URLs.

func (*GitDetector) Detect

func (d *GitDetector) Detect(src, _ string) (string, bool, error)

type GitGetter

type GitGetter struct {
	// contains filtered or unexported fields
}

GitGetter is a Getter implementation that will download a module from a git repository.

func (*GitGetter) ClientMode

func (g *GitGetter) ClientMode(_ *url.URL) (ClientMode, error)

func (*GitGetter) Context

func (g *GitGetter) Context() context.Context

Context tries to returns the Contex from the getter's client. otherwise context.Background() is returned.

func (*GitGetter) Get

func (g *GitGetter) Get(dst string, u *url.URL) error

func (*GitGetter) GetFile

func (g *GitGetter) GetFile(dst string, u *url.URL) error

GetFile for Git doesn't support updating at this time. It will download the file every time.

func (*GitGetter) SetClient

func (g *GitGetter) SetClient(c *Client)

type GitHubDetector

type GitHubDetector struct{}

GitHubDetector implements Detector to detect GitHub URLs and turn them into URLs that the Git Getter can understand.

func (*GitHubDetector) Detect

func (d *GitHubDetector) Detect(src, _ string) (string, bool, error)

type GitLabDetector

type GitLabDetector struct{}

GitLabDetector implements Detector to detect GitLab URLs and turn them into URLs that the Git Getter can understand.

func (*GitLabDetector) Detect

func (d *GitLabDetector) Detect(src, _ string) (string, bool, error)

type GzipDecompressor

type GzipDecompressor struct{}

GzipDecompressor is an implementation of Decompressor that can decompress gzip files.

func (*GzipDecompressor) Decompress

func (d *GzipDecompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

type HgGetter

type HgGetter struct {
	// contains filtered or unexported fields
}

HgGetter is a Getter implementation that will download a module from a Mercurial repository.

func (*HgGetter) ClientMode

func (g *HgGetter) ClientMode(_ *url.URL) (ClientMode, error)

func (*HgGetter) Context

func (g *HgGetter) Context() context.Context

Context tries to returns the Contex from the getter's client. otherwise context.Background() is returned.

func (*HgGetter) Get

func (g *HgGetter) Get(dst string, u *url.URL) error

func (*HgGetter) GetFile

func (g *HgGetter) GetFile(dst string, u *url.URL) error

GetFile for Hg doesn't support updating at this time. It will download the file every time.

func (*HgGetter) SetClient

func (g *HgGetter) SetClient(c *Client)

type HttpGetter

type HttpGetter struct {

	// Netrc, if true, will lookup and use auth information found
	// in the user's netrc file if available.
	Netrc bool

	// Client is the http.Client to use for Get requests.
	// This defaults to a cleanhttp.DefaultClient if left unset.
	Client *http.Client

	// Header contains optional request header fields that should be included
	// with every HTTP request. Note that the zero value of this field is nil,
	// and as such it needs to be initialized before use, via something like
	// make(http.Header).
	Header http.Header
	// contains filtered or unexported fields
}

HttpGetter is a Getter implementation that will download from an HTTP endpoint.

For file downloads, HTTP is used directly.

The protocol for downloading a directory from an HTTP endpoint is as follows:

An HTTP GET request is made to the URL with the additional GET parameter "terraform-get=1". This lets you handle that scenario specially if you wish. The response must be a 2xx.

First, a header is looked for "X-Terraform-Get" which should contain a source URL to download.

If the header is not present, then a meta tag is searched for named "terraform-get" and the content should be a source URL.

The source URL, whether from the header or meta tag, must be a fully formed URL. The shorthand syntax of "github.com/foo/bar" or relative paths are not allowed.

func (*HttpGetter) ClientMode

func (g *HttpGetter) ClientMode(u *url.URL) (ClientMode, error)

func (*HttpGetter) Context

func (g *HttpGetter) Context() context.Context

Context tries to returns the Contex from the getter's client. otherwise context.Background() is returned.

func (*HttpGetter) Get

func (g *HttpGetter) Get(dst string, u *url.URL) error

func (*HttpGetter) GetFile

func (g *HttpGetter) GetFile(dst string, src *url.URL) error

GetFile fetches the file from src and stores it at dst. If the server supports Accept-Range, HttpGetter will attempt a range request. This means it is the caller's responsibility to ensure that an older version of the destination file does not exist, else it will be either falsely identified as being replaced, or corrupted with extra bytes appended.

func (*HttpGetter) SetClient

func (g *HttpGetter) SetClient(c *Client)

type MockGetter

type MockGetter struct {

	// Proxy, if set, will be called after recording the calls below.
	// If it isn't set, then the *Err values will be returned.
	Proxy Getter

	GetCalled bool
	GetDst    string
	GetURL    *url.URL
	GetErr    error

	GetFileCalled bool
	GetFileDst    string
	GetFileURL    *url.URL
	GetFileErr    error
	// contains filtered or unexported fields
}

MockGetter is an implementation of Getter that can be used for tests.

func (*MockGetter) ClientMode

func (g *MockGetter) ClientMode(u *url.URL) (ClientMode, error)

func (*MockGetter) Context

func (g *MockGetter) Context() context.Context

Context tries to returns the Contex from the getter's client. otherwise context.Background() is returned.

func (*MockGetter) Get

func (g *MockGetter) Get(dst string, u *url.URL) error

func (*MockGetter) GetFile

func (g *MockGetter) GetFile(dst string, u *url.URL) error

func (*MockGetter) SetClient

func (g *MockGetter) SetClient(c *Client)

type ProgressTracker

type ProgressTracker interface {
	// TrackProgress should be called when
	// a new object is being downloaded.
	// src is the location the file is
	// downloaded from.
	// currentSize is the current size of
	// the file in case it is a partial
	// download.
	// totalSize is the total size in bytes,
	// size can be zero if the file size
	// is not known.
	// stream is the file being downloaded, every
	// written byte will add up to processed size.
	//
	// TrackProgress returns a ReadCloser that wraps the
	// download in progress ( stream ).
	// When the download is finished, body shall be closed.
	TrackProgress(src string, currentSize, totalSize int64, stream io.ReadCloser) (body io.ReadCloser)
}

ProgressTracker allows to track the progress of downloads.

type S3Detector

type S3Detector struct{}

S3Detector implements Detector to detect S3 URLs and turn them into URLs that the S3 getter can understand.

func (*S3Detector) Detect

func (d *S3Detector) Detect(src, _ string) (string, bool, error)

type S3Getter

type S3Getter struct {
	// contains filtered or unexported fields
}

S3Getter is a Getter implementation that will download a module from a S3 bucket.

func (*S3Getter) ClientMode

func (g *S3Getter) ClientMode(u *url.URL) (ClientMode, error)

func (*S3Getter) Context

func (g *S3Getter) Context() context.Context

Context tries to returns the Contex from the getter's client. otherwise context.Background() is returned.

func (*S3Getter) Get

func (g *S3Getter) Get(dst string, u *url.URL) error

func (*S3Getter) GetFile

func (g *S3Getter) GetFile(dst string, u *url.URL) error

func (*S3Getter) SetClient

func (g *S3Getter) SetClient(c *Client)

type Storage

type Storage interface {
	// Dir returns the directory on local disk where the directory source
	// can be loaded from.
	Dir(string) (string, bool, error)

	// Get will download and optionally update the given directory.
	Get(string, string, bool) error
}

Storage is an interface that knows how to lookup downloaded directories as well as download and update directories from their sources into the proper location.

type TarBzip2Decompressor

type TarBzip2Decompressor struct{}

TarBzip2Decompressor is an implementation of Decompressor that can decompress tar.bz2 files.

func (*TarBzip2Decompressor) Decompress

func (d *TarBzip2Decompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

type TarGzipDecompressor

type TarGzipDecompressor struct{}

TarGzipDecompressor is an implementation of Decompressor that can decompress tar.gzip files.

func (*TarGzipDecompressor) Decompress

func (d *TarGzipDecompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

type TarXzDecompressor

type TarXzDecompressor struct{}

TarXzDecompressor is an implementation of Decompressor that can decompress tar.xz files.

func (*TarXzDecompressor) Decompress

func (d *TarXzDecompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

type TarZstdDecompressor

type TarZstdDecompressor struct{}

TarZstdDecompressor is an implementation of Decompressor that can decompress tar.zstd files.

func (*TarZstdDecompressor) Decompress

func (d *TarZstdDecompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

type TestDecompressCase

type TestDecompressCase struct {
	Input   string     // Input is the complete path to the input file
	Dir     bool       // Dir is whether or not we're testing directory mode
	Err     bool       // Err is whether we expect an error or not
	DirList []string   // DirList is the list of files for Dir mode
	FileMD5 string     // FileMD5 is the expected MD5 for a single file
	Mtime   *time.Time // Mtime is the optionally expected mtime for a single file (or all files if in Dir mode)
}

TestDecompressCase is a single test case for testing decompressors

type XzDecompressor

type XzDecompressor struct{}

XzDecompressor is an implementation of Decompressor that can decompress xz files.

func (*XzDecompressor) Decompress

func (d *XzDecompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

type ZipDecompressor

type ZipDecompressor struct{}

ZipDecompressor is an implementation of Decompressor that can decompress zip files.

func (*ZipDecompressor) Decompress

func (d *ZipDecompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

type ZstdDecompressor

type ZstdDecompressor struct{}

ZstdDecompressor is an implementation of Decompressor that can decompress .zst files.

func (*ZstdDecompressor) Decompress

func (d *ZstdDecompressor) Decompress(dst, src string, dir bool, umask os.FileMode) error

Directories

Path Synopsis
cmd
helper
url

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL