v0.7.0-dev.4 Latest Latest

This package is not in the latest version of its module.

Go to latest
Published: Mar 8, 2016 License: MIT, Apache-2.0 Imports: 10 Imported by: 0




View Source
const (
	// Specific user-visible exit codes
	WaitErrExecFailed = 32767

	ERROR_GEN_FAILURE          = syscall.Errno(31)
	ERROR_SHUTDOWN_IN_PROGRESS = syscall.Errno(1115)
	WSAEINVAL                  = syscall.Errno(10022)

	// Timeout on wait calls
	TimeoutInfinite = 0xFFFFFFFF


This section is empty.


func ActivateLayer

func ActivateLayer(info DriverInfo, id string) error

ActivateLayer will find the layer with the given id and mount it's filesystem. For a read/write layer, the mounted filesystem will appear as a volume on the host, while a read-only layer is generally expected to be a no-op. An activated layer must later be deactivated via DeactivateLayer.

func CopyLayer

func CopyLayer(info DriverInfo, srcId, dstId string, parentLayerPaths []string) error

CopyLayer performs a commit of the srcId (which is expected to be a read-write layer) into a new read-only layer at dstId. This requires the full list of on-disk paths to parent layers, provided in parentLayerPaths, in order to complete the commit.

func CreateComputeSystem

func CreateComputeSystem(id string, configuration string) error

CreateComputeSystem creates a container, initializing its configuration in the Host Compute Service such that it can be started by a call to the StartComputeSystem method.

func CreateLayer

func CreateLayer(info DriverInfo, id, parent string) error

CreateLayer creates a new, empty, read-only layer on the filesystem based on the parent layer provided.

func CreateProcessInComputeSystem

func CreateProcessInComputeSystem(id string, useStdin bool, useStdout bool, useStderr bool, params CreateProcessParams) (_ uint32, _ io.WriteCloser, _ io.ReadCloser, _ io.ReadCloser, err error)

CreateProcessInComputeSystem starts a process in a container. This is invoked, for example, as a result of docker run, docker exec, or RUN in Dockerfile. If successful, it returns the PID of the process.

func CreateSandboxLayer

func CreateSandboxLayer(info DriverInfo, layerId, parentId string, parentLayerPaths []string) error

CreateSandboxLayer creates and populates new read-write layer for use by a container. This requires both the id of the direct parent layer, as well as the full list of paths to all parent layers up to the base (and including the direct parent whose id was provided).

func DeactivateLayer

func DeactivateLayer(info DriverInfo, id string) error

DeactivateLayer will dismount a layer that was mounted via ActivateLayer.

func DestroyLayer

func DestroyLayer(info DriverInfo, id string) error

DestroyLayer will remove the on-disk files representing the layer with the given id, including that layer's containing folder, if any.

func ExportLayer

func ExportLayer(info DriverInfo, layerId string, exportFolderPath string, parentLayerPaths []string) error

ExportLayer will create a folder at exportFolderPath and fill that folder with the transport format version of the layer identified by layerId. This transport format includes any metadata required for later importing the layer (using ImportLayer), and requires the full list of parent layer paths in order to perform the export.

func GetLayerMountPath

func GetLayerMountPath(info DriverInfo, id string) (string, error)

GetLayerMountPath will look for a mounted layer with the given id and return the path at which that layer can be accessed. This path may be a volume path if the layer is a mounted read-write layer, otherwise it is expected to be the folder path at which the layer is stored.

func GetSharedBaseImages

func GetSharedBaseImages() (imageData string, err error)

GetSharedBaseImages will enumerate the images stored in the common central image store and return descriptive info about those images for the purpose of registering them with the graphdriver, graph, and tagstore.

func ImportLayer

func ImportLayer(info DriverInfo, layerId string, importFolderPath string, parentLayerPaths []string) error

ImportLayer will take the contents of the folder at importFolderPath and import that into a layer with the id layerId. Note that in order to correctly populate the layer and interperet the transport format, all parent layers must already be present on the system at the paths provided in parentLayerPaths.

func LayerExists

func LayerExists(info DriverInfo, id string) (bool, error)

LayerExists will return true if a layer with the given id exists and is known to the system.

func PrepareLayer

func PrepareLayer(info DriverInfo, layerId string, parentLayerPaths []string) error

PrepareLayer finds a mounted read-write layer matching layerId and enables the the filesystem filter for use on that layer. This requires the paths to all parent layers, and is necessary in order to view or interact with the layer as an actual filesystem (reading and writing files, creating directories, etc). Disabling the filter must be done via UnprepareLayer.

func ResizeConsoleInComputeSystem

func ResizeConsoleInComputeSystem(id string, processid uint32, h, w int) error

ResizeConsoleInComputeSystem updates the height and width of the console session for the process with the given id in the container with the given id.

func ShutdownComputeSystem

func ShutdownComputeSystem(id string, timeout uint32, context string) error

ShutdownComputeSystem shuts down a container by requesting a shutdown within the container operating system.

func StartComputeSystem

func StartComputeSystem(id string) error

StartComputeSystem starts a container that has previously been created via CreateComputeSystem.

func TerminateComputeSystem

func TerminateComputeSystem(id string, timeout uint32, context string) error

TerminateComputeSystem force terminates a container.

func TerminateProcessInComputeSystem

func TerminateProcessInComputeSystem(id string, processid uint32) (err error)

TerminateProcessInComputeSystem kills a process in a running container.

func UnprepareLayer

func UnprepareLayer(info DriverInfo, layerId string) error

UnprepareLayer disables the filesystem filter for the read-write layer with the given id.

func WaitForProcessInComputeSystem

func WaitForProcessInComputeSystem(id string, processid uint32, timeout uint32) (int32, error)

WaitForProcessInComputeSystem waits for a process ID to terminate and returns the exit code. Returns exitcode, error


type CreateProcessParams

type CreateProcessParams struct {
	ApplicationName  string
	CommandLine      string
	WorkingDirectory string
	Environment      map[string]string
	EmulateConsole   bool
	ConsoleSize      [2]int

CreateProcessParams is used as both the input of CreateProcessInComputeSystem and to convert the parameters to JSON for passing onto the HCS

type DriverInfo

type DriverInfo struct {
	Flavour int
	HomeDir string
To pass into syscall, we need a struct matching the following:

enum GraphDriverType

struct DriverInfo {
    GraphDriverType Flavour;
    LPCWSTR HomeDir;

type GUID

type GUID [16]byte

func NameToGuid

func NameToGuid(name string) (id GUID, err error)

NameToGuid converts the given string into a GUID using the algorithm in the Host Compute Service, ensuring GUIDs generated with the same string are common across all clients.

func NewGUID

func NewGUID(source string) *GUID

func (*GUID) ToString

func (g *GUID) ToString() string

type HNSEndpoint

type HNSEndpoint struct {
	Id                 string            `json:",omitempty"`
	Name               string            `json:",omitempty"`
	VirtualNetwork     string            `json:",omitempty"`
	VirtualNetworkName string            `json:",omitempty"`
	Policies           []json.RawMessage `json:",omitempty"`
	MacAddress         string            `json:",omitempty"`
	IPAddress          net.IP            `json:",omitempty"`

HNSEndpoint represents a network endpoint in HNS

func HNSEndpointRequest

func HNSEndpointRequest(method, path, request string) (*HNSEndpoint, error)

HNSEndpointRequest makes a HNS call to modify/query a network endpoint

type HNSNetwork

type HNSNetwork struct {
	Id       string            `json:",omitempty"`
	Name     string            `json:",omitempty"`
	Type     string            `json:",omitempty"`
	Policies []json.RawMessage `json:",omitempty"`
	MacPools []MacPool         `json:",omitempty"`
	Subnets  []Subnet          `json:",omitempty"`

HNSNetwork represents a network in HNS

func HNSListNetworkRequest

func HNSListNetworkRequest(method, path, request string) ([]HNSNetwork, error)

HNSListNetworkRequest makes a HNS call to query the list of available networks

func HNSNetworkRequest

func HNSNetworkRequest(method, path, request string) (*HNSNetwork, error)

HNSNetworkRequest makes a call into HNS to update/query a single network

type HcsError

type HcsError struct {
	Err error
	// contains filtered or unexported fields

func (*HcsError) Error

func (e *HcsError) Error() string

type MacPool

type MacPool struct {
	StartMacAddress string `json:",omitempty"`
	EndMacAddress   string `json:",omitempty"`

MacPool is assoicated with a network and represents a list of macaddresses available to the network

type NatPolicy

type NatPolicy struct {
	Type         string
	Protocol     string
	InternalPort uint16
	ExternalPort uint16

type QosPolicy

type QosPolicy struct {
	Type                            string
	MaximumOutgoingBandwidthInBytes uint64

type Subnet

type Subnet struct {
	AddressPrefix  string `json:",omitempty"`
	GatewayAddress string `json:",omitempty"`

Subnet is assoicated with a network and represents a list of subnets available to the network


	LayerId GUID
	Flags   uint32
	Pathp   *uint16
To pass into syscall, we need a struct matching the following:

typedef struct _WC_LAYER_DESCRIPTOR {

// The ID of the layer

GUID LayerId;

// Additional flags

union {
    struct {
        ULONG Reserved : 31;
        ULONG Dirty : 1;    // Created from sandbox as a result of snapshot
    ULONG Value;
} Flags;

// Path to the layer root directory, null-terminated



Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL