beekeeper

README

beekeeper

beekeeper keeps the Claude Code sessions sharing one machine working together. When a dozen sessions run at once on one workstation, they compete for the same things: RAM and swap (one OOM kill of the desktop scope ends every session), a handful of kind labs and shared installations, the one browser the Claude in Chrome extension drives, the merges into a repository that rolls an installation, and the one GitHub REST budget every gh and devctl call draws from.

beekeeper reads what is on disk: the process table, the record each Claude Code CLI keeps of the session it runs (~/.claude/sessions), the desktop app's session records, the transcripts and the git checkouts. It needs no MCP call and no GitHub request to show what every session does. What must be shared lives in a small state directory that survives restarts: the supervisor, grants, holds, registered agents, notes, timers and session records. Every session and the supervisor use the same binary.

Install

Download the binary for your OS and architecture from the latest release into any directory on your PATH:

dir=~/.local/bin   # any directory on PATH
curl -fsSL -o "$dir/beekeeper" https://github.com/giantswarm/beekeeper/releases/latest/download/beekeeper-linux-amd64
chmod +x "$dir/beekeeper"

Then put it in place for your user, after a look at what it would do:

beekeeper install --dry-run   # every file, hook and service step; changes nothing
beekeeper install

install merges the PreToolUse, PermissionRequest, PostToolUse and SessionStart hooks into Claude Code's user settings (~/.claude/settings.json, or $CLAUDE_CONFIG_DIR) with the binary's absolute path, writes and starts the standby service (a systemd user unit, a launch agent on macOS), with teleport.proxy set the Teleport login's keeper, and on systemd the memory guard sized to the machine's RAM: memcap.slice for beekeeper run's capped commands and a drop-in for the Claude Desktop scope that runs (run install again with the app running when it does not). Without a config it writes a starter one, the example configuration with every key commented out. A file already as install writes it stays, and one that differs and that install did not write it keeps and names; a second run changes nothing. A new Claude Code session picks the hooks up. beekeeper uninstall (also with --dry-run) stops the units and removes exactly what install wrote, as install.json in the state directory records it, and leaves the config and the state unless --purge. On Linux without systemd install writes the hooks and the config and says the service is not available.

The hooks are user-wide, but they act only in the desk's scope: a session beekeeper started or knows (an agents start, the supervisor's or the guide's holder, an agent on the roster), or one whose working directory or project lies under one of hooks.scope.dirs. A session on the person's own projects outside these gets nothing from them: no refusal, rewrite, redaction, prelude or permission answer. Unset, every session is in scope.

hooks:
  scope:
    dirs: [~/projects/notebook, ~/projects/work]

From then on beekeeper self-update keeps it current: it verifies the release binary's Sigstore signature and renames it over the old one in one step, so a running beekeeper watch keeps running, and a devctl pr merge gate call waiting for its turn re-executes the new binary at its place. A running watch keeps the code it started with: every watch, --once included, says WATCH STALE once per watch whose binary was replaced, naming the version it runs and the one installed, and that a re-arm (a restart) picks the new one up; no watch re-executes itself. beekeeper self-update --check exits 125 while a newer release is out.

The session and machine views need Linux (/proc, cgroup v2, the journal). Leases, holds and the budget work on any system.

The role plugin

The commands are half of a desk; the roles that drive them are the other half. The repository is also a Claude Code plugin marketplace whose plugin plugin/ carries them as skills: /beekeeper:supervise (the supervisor), /beekeeper:guide (the session that walks the person through their decisions), /beekeeper:register-agent (an empty session joining the roster) and /beekeeper:worker-rules (what every worker follows; agents start puts it ahead of every brief). Their text is generic: the desk's installations, resources, lanes and person are the configuration's keys (below), and the desk's own conventions — which board, which repositories, local traps — stay in the project the sessions run in, which the skills defer to. beekeeper lint briefs <file or folder>... refuses what makes a skill or a brief go stale: a dated line, an "until X ships" clause, a note on the release that fixed something, a workaround, a role's run number. The shipped skills pass it in CI, and a project holding its own skills can run it as a CI step (exit 3 on a finding).

claude plugin marketplace add giantswarm/beekeeper
claude plugin install beekeeper@beekeeper   # --scope project for one project only

or, for a project's shared settings (.claude/settings.json):

{
  "extraKnownMarketplaces": {
    "beekeeper": {"source": {"source": "github", "repo": "giantswarm/beekeeper"}}
  },
  "enabledPlugins": {"beekeeper@beekeeper": true}
}

The plugin follows the default branch; "ref": "<release tag>" in the source pins it to the binary's release. With supervisor.skill: beekeeper:supervise and guide.skill: beekeeper:guide a relayed successor opens with the plugin's role.

What it does

Command	For
beekeeper status [--bar]	One line: who supervises, the leases held, the holds in force and the notes and timers that are due. --bar prints it as the fixed tab-separated row a desktop bar reads (see Desktop notifications).
beekeeper sessions	Every running session, Claude Code's and omp's (marked omp busy or omp idle, see omp agents): the issues and pull requests its latest turns acted on (its sessions serve record, its gh and devctl commands and GitHub tool calls, what it created; a ref it only quoted or read is a mention, kept in --json as mentioned), when it was last active, the commands it runs right now (a devctl wait, a bounded sleep with the time left), its memory, how full its context is, its last hour (turns, tool calls and their errors, GitHub calls, cost), role and leases, after archived or test for a session the guide's feed leaves out. Overlaps name what more than one session acts on. --all adds the paused ones and the omp sessions of the last 24 hours no process runs: a message to them does not arrive. --json has every figure per session and their totals (see Session metrics).
beekeeper tail <session>	A session's last turns without tool calls: what it said and what it was told.
beekeeper snapshot	One tick: load, RAM, swap, memory pressure, the desktop scope, tmpfs and disk, build slots, kind clusters, the sessions' last hour and the three that spent the most in it, the commands sessions sit on, every kernel OOM kill since your last snapshot with whose limit it hit (a memcap scope no run.start names says cap unknown, never the default cap; a test run's scope is a test kill), leases, holds, the GitHub budget, the installations' alerts and their running upgrades (upgrades: prod/mc 35.0.1 → 35.1.1 for 9m (control plane 3/4, node pools 15/15) · test none). A caller inside a Claude session that has taken one before gets only what changed since, or one no change line; --full prints the whole screen and then what changed.
beekeeper ui	The person's screen, for a terminal rather than a session's context: six tabs over the live state — the machine (load, RAM, swap, pressure, the desktop scope, disks, build slots, kind labs, the waits and the OOM kills), every session, Claude Code and omp (its state — busy, idle, waiting on its person, omp's own —, idle age, memory, context fill, last hour, what it runs, what it waits on its person for — a waiting session stands out; enter opens its pane, which follows the session live: the history, then the current turn with its tool calls as they land, re-read every refresh; k/j scroll back and forward, G follows again; m writes the session a message, stamped as the person's through the screen: by name to a Claude Code CLI, into the inbox of an omp agent beekeeper started; t takes a Claude Code session over: its permission requests come to the pane with its turns beside them, a allows and d denies, and one left unanswered for 290 s, or when t hands it back or the screen quits, goes to the session's own window, which the pane says), the shares (held leases and their staleness, free resources, grant queues, holds, the merge lanes), the supervision (the supervisor and guide roles with their relay state, the agents, the open notes with their defaults, the timers, the session records), the installations' alerts by severity with the running upgrades and the GitHub budget and its pollers, and the event log. Refreshes every two seconds (the budget and the upgrades every minute, in the background); besides those messages and take-overs it reads only: it takes no lease and lifts no hold — those stay with the commands, whose exit codes the sessions gate on.
beekeeper watch	Silent until something needs a look, then one line: the source of a Monitor. A threshold breach, an unreadable source and a stalled lane are one line when they start and one ENDED line when they end, never repeated while they last; OOM kills, sessions that start, end or restart, stale leases and every NEW or RESOLVED alert of the installations are always reported. A note or timer that falls due, the end of a session with a record and a relay taken or expired are one line each, once: the state keeps that they were reported, so a second or restarted watch stays silent about them. Once the supervisor session's context (its transcript's last request, the CTX column) reaches supervisor.relayAt (400k tokens), RELAY DUE is said at the first quiet moment (no gated merge running or settling, no grant waiting, no claim queued, no relay open), once per supervisor and again only after a relay is cancelled or expires; supervisor status and handover show the supervisor's context. A recorded supervisor whose CLI has stayed gone past supervisor.restartGrace with no relay open is SUPERVISOR GONE, once: claims stay gated until a successor's supervisor start; a supervisor back after it is SUPERVISOR BACK, once; its CLI back under the same session with a new PID is SUPERVISOR RESTARTED. A session over a threshold in metrics.runaway is one RUNAWAY line per figure, once per watch. A fork rate watch.forkRateMax over the machine's usual one for two samples is one PROCESS STORM line, and more than watch.stackMax long-running copies of one command line one STACKED line each, with the commands, the parent and the owning session, and more than watch.toolProcsMax (1000) processes of the CLIs in watch.tools (kubectl, helm, tsh, gh, flux, devctl) machine-wide one LOAD line with their commands and the sessions that run them, and an ENDED line each. A stalled lane (see lanes) is one LANE STALLED line, repeated at most every 10 minutes while it lasts. A settling merge leaves its lane once its release rolled and the lane's HelmReleases are Ready, however late; one not settled past merge.settleTimeout is one LANE STUCK line with what the lane waits for (the HelmRelease off the release, the one not Ready, an installation that cannot be read), repeated at most every 10 minutes, and one ENDED line when it settles or the lane is cleared; lanes marks it stuck since. A cluster upgrade on an installation (see Cluster upgrades) is UPGRADE <installation>/<cluster> <from> → <to> when it begins and UPGRADE ENDED … (since HH:MM) when it ends, once each. The quiet rules keep what is noise for the supervisor out of its lines: other teams' alerts matching alerts.quiet (by default their e2e test clusters, t-*, and, once alerts.team is set, every other team's and team-less notify alert), an alert back after a reading that missed it with its old start (an Alertmanager restart, a reconnect), and the start, end and restart of the short-lived sessions in watch.quietSessions (by default beekeeper's tests, test: *). A rule never holds back an alert of alerts.team, one on an installation in play (leased, claimed or merged into within the last 30 minutes, or with a merge settling), or a page unless the rule names a cluster; everything else is said as before. What they hold back is logged (beekeeper log --verb watch.quiet) and counted in snapshot. --notify also sends the events that need a person to the desktop, --standby leaves a running supervisor's events to its watch (see Desktop notifications).
beekeeper alerts watch|snapshot|import|capture|replay|own	The installations' alerts, read from each Alertmanager through a bounded kubectl port-forward (Mimir's with the giantswarm tenant, else the plain one), in parallel: watch prints one line per NEW or RESOLVED alert since the baseline (pages and your team in capitals, a burst of one alertname as one line, one line when an installation stops or starts answering, the lease holder and the sessions working against it in brackets, and on a NEW line the merges into the installation's lanes and the lease claims on it of the last 30 minutes with their sessions, worded as timing (during merging …, during merged … at …), not as cause); snapshot the current set, grouped; import takes over another watcher's per-installation baseline. An alert below its installation's severity floor never appears in either, and an alert that keeps firing and resolving is one FLAPPING line, then quiet until it has been stable for the damper's window; neither a floor nor a damper change prints a burst of lines. capture <dir> records each installation's answer, replay <dir>... prints what the watch would for recorded answers, from the current baseline without writing it: a floor or damper setting tried before the watch gets it. own <installation/alertname> records the caller (--by another running session, --as a person) as the owner of the firing alerts it names (alert.owned); ownership ends with the owning session or the alert's resolution. beekeeper watch says PAGE UNOWNED <installation> <alertname> <where> for <duration> (one line per alertname, (+n) for its other unowned alerts) for a firing alert at alerts.pageSeverity (default page), of alerts.team when it is set, that has had no owner for alerts.ownerGrace (15m), and again every alerts.ownerGrace while it stays unowned; the owner's session ending starts the count again, and a non-paging alert never gets the line. One process owns the baseline at a time, so two watches never split the lines. Every port-forward ends with the reading, on SIGINT or SIGTERM, and when beekeeper is killed.
beekeeper budget	The GitHub core budget from the headers of a real, conditional request (a 304 costs nothing), and every gh and devctl process with its session. --gate exits 3 under the floor.
beekeeper lease claim|release|status|grant|revoke	One holder per resource: the environments in the configuration, the host's model server (model-server, whose claim carries --gib <n>: the GiB its models may hold, see The model server) and the browser. While a supervisor runs, a session claims only what the supervisor granted it, in grant order. While a cluster upgrade runs on the installation of the resource's name, nobody claims it except by the supervisor's lease grant <installation> <session> --upgrade-unblock "<why>", for the work that unblocks the upgrade (see Cluster upgrades).
beekeeper hold set|lift|check	Stop merges into a repository (a broken main), one lane (--lane serving: a proving window such as a model load stops the lane whose components it exercises, not the others), every merge (merges) or every GitHub call (github) until lifted or a time passes. A merge hold lets one repository or pull request through with --except owner/repo[#n]: hold set --lane serving --except giantswarm/model-manager#172 stops the lane but for the merge it waits for. A lane hold that excepts one pull request (owner/repo#n) is also its fix window: that merge runs without the lane's HelmReleases Ready or the previous release rolled, for the fix of a rollout only the fix can repair, logged as merge.window. The merge gate enforces them.
beekeeper lanes [queue|settle|drop|clear]	Each merge lane: the running merge, the one settling until its release rolled, and the waiting ones in turn order, so who is next is never prose. queue <owner/repo> <n> --for <session> gives a session's merge its place now so an agreed order carries over (kept until that merge runs, through refusals, for merge.seedTTL, 12h; seeds keep their order, an arrived unseeded merge passes one whose merge has not arrived); a run with nothing merged stays in its place as retrying for its session's retry; settle <owner/repo> <n> [--for <session>] registers a merge run outside the gate (in flight when the gate went live, run without the hook): it heads its lane until it merges, then settles the lane like a gated merge; drop takes a waiting merge out (a place whose pull request merged or closed leaves by itself at the next watch poll); clear is the repair for a lane whose settling release will not roll, after a look at the installation. A lane where no merge runs and whose first arrived merge has waited longer than merge.stallAfter (5m) behind places whose merges are not in the gate (seeds that have not arrived, merges that left it) is stalled, with the waiting merge and those places named.
beekeeper board next [--claim]|move	The project board's next item of work: next walks board.order (steps by Status, Kind and labels; an epic's open sub-issues; blocked items whose blockers all closed; items created within a window; a GitHub search; a sub-issue that is a board item held to the order by its own Status, whatever its Team) over one read of the board and prints the first free item with why it is picked and why each item above it was skipped: served by a running session (a sessions serve record, a busy agent's task), waiting on an open note, assigned outside board.people, blocked by an open recorded blocker, or without activity for board.staleAfter; a sub-issue offered through an epic passes the same checks, and a serve record, task or note naming the epic covers it (…, on epic owner/repo#n). --claim records the pick as the calling session's serve under the state lock, so two concurrent claims never get the same item; it changes nothing on the board, the caller moves the item with board move once it judged it, and ends with the session, agents idle or sessions unserve. move <issue> <status> sets an item's Status by the board's canonical name or an unambiguous part ("up next"), and refuses anything else with the board's values.
beekeeper supervisor start|stop	Make a session the supervisor. The grant rule applies from its start until a deliberate supervisor stop (which ends supervision and starts no successor) or a successor's supervisor start: a supervisor whose CLI crashed keeps it in force, its grants and queue stay recorded, and every claim waits for the successor. A CLI back under the same session id or desktop record within supervisor.restartGrace (30s) of beekeeper first seeing it gone (a claim or a watch's poll) is a restart and keeps the role and an open relay without a new start; supervisor status and status show it restarting, then gone. Another session's start is refused while it runs or restarts, unless the supervisor relayed the role to it; past the grace a successor's start takes the role. The start prints the holder's first look in a few KB: leases, holds, lanes, what waits on it (pinned and open notes, the guide's as a count, the decisions answered since the last relay, timers) and the agents with their tasks. A start that changes the holder runs agents broadcast in a transient unit, so every running agent learns the name that answers now.
beekeeper supervisor reopen	Open the recorded supervisor's desktop session, starting the app if needed (the login unit, see Fresh successors).
beekeeper supervisor relay [--cancel]	Hand the role over without a gap: beekeeper starts the next run, "Supervisor run N+1", as a fresh session (as agents start does, so its desktop title, roster name and messaging name are one) and opens the relay to it; its first turn's supervisor start takes the role, the grant queue and the pending grants in one step, and the event log shows both. Until then the outgoing supervisor keeps the role and the grant rule; a relay not taken expires after supervisor.relayTTL (15m) or is withdrawn with --cancel, and a successor that does not start withdraws it. supervisor status in the relieved session exits 4, also after the successor relays onward, cancels a relay or is relieved in turn, until that session supervises again (or for 7 days). Once the successor took the role, the doctor owes the relieved run's desktop row the archive and does it once that run's CLI runs no turn, which frees the desktop CLI slot it held (guide relay likewise); the successor's start line says so.
beekeeper guide start|stop|status|relay	The guide: the session that walks the person through the decisions waiting on them, next to the supervisor and never in its session (guide start in the supervisor's session and supervisor start in the guide's are refused, and neither relays to the other's holder). It has no grant power. Its role moves like the supervisor's (a relay to a fresh "Guide run N+1", its start, relief with exit 4, restart grace, a fresh successor after a crash) without touching the supervisor's record; guide handover --prompt is the successor's prompt (guide.skill, default guide, or guide.instructions, then its queue and an open relay).
beekeeper guide next	The one decision the guide asks now: the open note for its person due first, marked as being asked (guide.asking), served again until note answer or note done closes it; only then the next. Only the guide's session calls it; --json the item.
beekeeper guide queue	The guide's queue: every open note filed for its person, guide.person (note add --for, or an older note's [for <person>] text prefix; any case), with its owning session (the one that filed it, and whether it still runs), deadline and default, then every session whose record says it waits on the person (sessions serve … --waits "<person>: <ask>", the person in any case; with guide.person unset, every --waits), while its CLI runs or stopped ((stopped)) less than guide.waitingTTL ago (default 2h; 0: never folds), except the guide's own session, an archived one, a test (titled test: …) and an agent that reported its task after the wait (agents idle, --done, or taken off the roster). The sessions stopped longer ago fold into one line, <n> stopped session(s) waited on <person>; --full lists them. guide watch says nothing for a session that only aged out. With guide.person unset, every note filed --for anyone, and a line that says so. Delta output like sessions.
beekeeper guide watch [--once]	The guide's feed, silent otherwise: GUIDE DECISION for each new open note of the queue (only guide.person's; with it unset, every --for note and one GUIDE: line that says so), GUIDE WAITING for each session of the queue newly waiting on its person (only an explicit --waits: the desktop's turn summary does not count), GUIDE ANSWERED or GUIDE CLOSED for a note of the queue closed (GUIDE CLOSED #<id> overtaken: <reason> for an overtaken one), GUIDE ORPHANED #<id> for <person>, its filing session "<name>" is archived; ask it, or close it with note done <id> --overtaken: <text> for an open note without --ref whose filing worker session is archived (note add --ref), and the guide's relay: GUIDE RELAY DUE once its context reaches guide.relayAt (150k), GUIDE RELAY TAKEN, GUIDE RELAY EXPIRED, GUIDE RESTARTED. Each is one line, once: what it said is kept in the state (guide.fed).
beekeeper agents register|assign|idle	The roster of empty sessions registered as spare capacity. register names the session by its title (a claude --bg worker by its -n name) unless --name overrides it. A name is one agent's: registering under the name of a session that no longer runs (what agents shows as not running: stopped, closed or asleep) replaces its entry, saying so; a task the replaced entry left unfinished becomes the new entry's, with its assignment time, named in the agents.register event (replaces <id>, takes over "<task>") and in the output, so the fresh session works it and a later assign to the name is refused as busy until idle. Re-registering keeps the session's own open task, so a session agents start registered busy stays busy when it registers itself (register: <name> busy with "<task>"); two dropped entries with open tasks are refused (exit 3). A name a running session's entry holds is refused (exit 3). assign and remove take a session id, a name or a unique part of one, and refuse a name several entries share.
beekeeper agents start <name> <brief file> [--task t] [--model m] [--dir d] [--harness omp]	Starts an agent session without a click: claude -p in bypassPermissions under a session id beekeeper chooses, the brief as its first prompt, in a transient user unit beekeeper-agent-<id> (KillMode=process, the user manager's environment). Before the session exists it records the id and mode as one of beekeeper's starts (the state's starts, kept 30 days) and registers it on the roster under the name, busy from its start with --task (by default the brief's first line) or with the open task of a stopped entry under that name. Once the transcript holds the first reply it imports the session into Claude Desktop (claude://resume?session=<id>, sidebar row local_<id> titled with the name: beekeeper appends the name's custom-title line to the transcript first, since the import reads only its last 256 KiB) and switches the desktop back to the session it showed before (claude://code/continue), the one the desktop log (claude.desktopLog) last names as focused. See Agents started without a click. --harness omp starts an omp agent instead, see omp agents.
beekeeper agents desktop [agent]	Asks for an agent's desktop turn (the browser): its import or reopen shows it in the desktop without waiting for the window's focus, the person's typing holding it 1 minute at most; an agent with neither a CLI nor a waiting reopen is shown at once. By default the calling agent. See Agents started without a click.
beekeeper agents wake <agent> <message> [--permission-mode m]	Messages a registered agent without Claude Desktop's local_ route and its cap (a session's desktop sends pause after ten since its person last typed in it). A running CLI gets the message by name; a session with none is resumed headless, claude -p --resume <id> with the message as its turn, in its directory, permission mode (a start's bypass, else the desktop record's) and recorded model, in a transient unit beekeeper-wake-<id>-<wake>, one per wake; its ExecStopPost runs agents reopen <local_ id>, which warms the desktop's CLI again. agents shows live, first turn running or live, wake turn running while a headless turn is the session's CLI. See Waking a session.
beekeeper agents handover <agent> [--prompt] [--model m] [--dir d]	Hands a registered agent over to a fresh session near its context limit, one line per step: asks it by peer message, or in a headless turn resumed from its transcript when its CLI does not run or take the message, for beekeeper agents note "<what is in flight, what is next>" (waiting agents.noteWait at most), builds the follow-up's prompt, starts the follow-up as agents start does under the agent's name (it takes over the roster entry, the task and the session record), stops the old session's CLI and the processes under it by PID (a claude --bg session through claude stop first, so its daemon does not resume it), archives the old session's desktop row once its CLI has exited, and logs agents.handover. --prompt prints the prompt only. watch says HANDOVER DUE once per agent session at agents.relayAt. See Agents handed over near their context limit.
beekeeper agents broadcast <message>	Sends one message by name to every registered agent whose CLI runs, one after the other, the supervisor and the caller left out; a stopped agent is not resumed for it. One agents.broadcast event logs whom it reached.
beekeeper agents note <text>	The calling agent's hand-over note, logged as an agents.note event; the next agents handover puts the latest one into the follow-up's prompt.
beekeeper note add|answer|done|pin|unpin	Open items that outlive a session: a decision waiting on a person with its deadline and what happens if nobody answers (note add --for Ada --due 22:55 --status-quo "<what is true now>" --why "<why it needs Ada>" --default "the alert stays as is" <text>), a deadline. A note for guide.person (any --for with it unset) is refused, naming what it lacks, without --status-quo, --why, a --default that is an action (not wait or none), every --option as <choice>: <consequence>, the full URL of every #N or owner/repo#N, and --checked "<source>" for a claim that something is merged, green, released, rolled or closed, and while a pull request it links in a plans repository (plans.repositories) is open with its stage check (plans.check, plan-stages) red, pending or missing, naming what the check found; one on an issue or PR an open note for the same person names, with the same verb (the text's first word), folds into it (note.folded). --kind login --until "<probe>": the watch runs the probe each tick and closes the note once it exits 0. Notes without --for are memos, unchecked. A note for a person asking again what was answered for them within 72 hours (the same verb on one of the same issues or PRs) is filed with a warning that quotes the answer. --pin (or note pin <id>) makes a note a standing instruction: every hand-over, the supervisor's and the guide's, carries it until note unpin or note done. watch reports a note once when it is due. --ref owner/repo#n (repeatable) links a note to the issues or PRs it asks about: once every one is closed or merged, watch closes it as overtaken (NOTE OVERTAKEN, note.overtaken with the reason; watch --once names it and writes nothing); a note without --ref is never closed by the watch: once the session that filed it is archived (a stopped session is not), guide watch names it to the guide as orphaned, to ask or close by hand (a role's run, current or relieved, never orphans its notes). Pinned and login notes, and the note the guide asks now, are never overtaken. note done <id> --overtaken "<why>" closes one so by hand. note answer <id> <answer> records the person's answer word for word and closes the note; the note.answered event carries it for the owning session, the supervisor and the guide's feed.
beekeeper reporter final|pause|resume	Pauses the scheduled reporter: final 06:45 (or 45m) starts one last report at that time, covering the time since the last one, then pauses; pause pauses now; resume starts the current slot's report at the standby watch's next poll and the schedule again.
beekeeper report [--since 1h|15:04] [--until 15:04] [--tz zone]	Renders the status report from beekeeper's own state, as Markdown that passes reporter check: the pull requests and promotions the gate merged in the window with title, release and rollout; the running work (roles, busy agents, sessions serving an issue) with the issue, what it waits on and its leases; what waits on reporter.person (open notes per owning session, sessions waiting on an answer, the open drafts of reporter.reviews); the merge lanes, timers and holds; the machine. Every time in reporter.tz (--tz; default the machine's zone); one GitHub request for the titles and drafts. See The scheduled status reporter.
beekeeper reporter check	Checks a report on stdin as the reporter's post hook does (see The scheduled status reporter): one line per problem and exit 3, or ok.
beekeeper reporter	The scheduled status reporter (see The scheduled status reporter): its schedule, when the next one starts, and the current or last run with its outcome.
beekeeper timer add|done|list	Times to look at something: timer add 22:55 "check the rollout" (or a duration, 45m). watch prints one line when a timer is due; it stays open until timer done. A timer can wait on a condition from its time instead: --when "pr-merged owner/repo#n" (also issue-closed owner/repo#n, helmrelease-ready context/namespace/name, controlplane-ready context/namespace/name) or --probe "<command>" (exit 0: it holds), checked by the watch every --every (5m), each distinct check once per tick however many timers share it and a GitHub one only above the budget floor; it fires within one tick of the condition holding. --until ends the wait: the timer then fires as timed out, or with --expire closes unfired (TIMER EXPIRED). --wake <agent> wakes the agent with the timer's text (as agents wake; TIMER WAKE FAILED when it cannot), --run "<command>" runs a command, its output in timers/<id>.log of the state directory and its exit code logged (timer.ran, TIMER RAN); without either the TIMER line is for the supervisor. Such a timer closes when it fires.
beekeeper ps [name|pid...]	The process table with every command line masked: PID, parent, age, CPU time, resident memory, and the command line as the watch's STACKED line prints it (the program, its subcommands and flag names; flag values, key=value words, URLs and what follows a short option's letter left out). A masked line ends in (masked), so a left-out value is never read as an empty one. A number narrows the list to a PID, a word to the processes whose masked line or name holds it. --json has the rows. The hook's refusal of a whole command-line read names it (Secret reads).
beekeeper sessions serve|unserve	A record for any session, registered agent or not: sessions serve <session> <owner/repo#n> [--waits "<what>"], the issue or epic it serves and what it waits on; `sessions unserve <session
beekeeper handover [--prompt] [--section <name>]	Everything the next supervisor needs, as Markdown, from the live state: leases and grants, holds and their exceptions, agents, session records, pinned notes, notes with their defaults, the decisions answered since the last relay, timers, the merge lanes with their queues and settling merges, and what the alert watch reads (the installations and why, the ignored alert names, the baseline). --prompt prints the successor's session prompt: the configured instructions (supervisor.skill or supervisor.instructions), the scope, the pending state and the commands that read the live values; no live value (version, memory figure, pull request state). Both show what a successor acts on in its first minutes: the notes the guide serves (for guide.person and for the guide) are one count line, records of sessions ended over an hour ago one line, and the answered decisions those since the predecessor's start with a count of the rest of 72 hours. --section <name> prints one section with everything it holds (notes, records, answers, …).
beekeeper log [--verb PREFIX]	Every claim, grant, hold, registration, note, timer, session record and build run, as they happened; --verb run. shows only the runs.
beekeeper run [--max SIZE] [--wait DURATION] -- <command>	Run a build, test or lint command in one of the machine's build slots (memcap's, shared with the memcap wrapper) inside a memory-capped systemd scope. When every slot is held it waits once, then exits 75 with the holders; when the cap fires the kernel kills the biggest process in the scope only, and run exits 137 with one line starting beekeeper run: the <SIZE> cap killed:. Each run leaves run.start and run.end in beekeeper log with its scope, session and command, so snapshot and watch name a cap kill's session and command after the run has ended. MEMCAP_TEST=1 marks a test's run: its scope is memcap-test-…, and a kill in it is reported as a test kill (one quiet test kill: line in watch), never as a build's.
beekeeper hook pretooluse	The PreToolUse hook (matcher `Bash
beekeeper hook posttooluse	The PostToolUse hook (matcher *): replaces a tool result that carries an indexed secret value or a token pattern with its redacted copy before the model sees it, logs scan.redact and files one rotation note per indexed reference (see What reaches the model).
beekeeper secret compare|fingerprint|copy|set	The credential operations no agent runs itself: equality, keyed fingerprints, a SOPS file copied under a new name and namespace, a value into a SOPS path or a consumer's stdin, a generated value into the shared vault and a SOPS path. They answer key names, lengths, equality and fingerprints, never a value (see Secret operations).
beekeeper scan [index|add <ref>|sweep]	The transcript value scanner: without a subcommand what the fingerprint index holds; index rebuilds it from scan.sops and scan.vaults, add indexes one value from stdin, sweep counts each reference and token rule in every transcript, never a value (see What reaches the model).
beekeeper hook sessionstart	The SessionStart hook: writes the agent shell's prelude into the session's environment file ($CLAUDE_ENV_FILE), which Claude Code sources before parsing each Bash command. It removes the aliases and shell functions of agents.shell.unalias (default grep, find, ls, cp, mv, rm, the harness's own grep and find shadows among them), so each name runs the tool on PATH, and with agents.shell.globs: literal (the default) an unmatched glob stays as written instead of failing the command with zsh's no matches found. The person's interactive setup stays theirs; an agent writes its commands for the plain tools.
beekeeper lint briefs <file or folder>...	Refuses dated lines, "until X ships" clauses, notes on the release that fixed something, workarounds and role run numbers in skills and briefs (every Markdown file below a folder), one path:line: rule: why per finding, exit 3 on any.
beekeeper hook permissionrequest	The PermissionRequest hook: answers allow only for a session agents start started in bypass that now runs in acceptEdits; every other request gets no answer, so the person sees the normal card. Below.
beekeeper free [--apply] [--only SECTIONS] [--summary]	Show where the memory is and, with --apply, free what no running work needs: dead sessions' dirs in the tmpfs /tmp (the CLI is gone; an idle session's stay), throwaway temp dirs and orphaned jest or Claude workers. Kind clusters, idle CLIs, heavy or runaway processes and Chrome renderers are only reported. Each Claude CLI is listed with its session's title and id, its roster state (busy, parked, idle), its role (supervisor, guide, relay spare) and the hours since its transcript changed; one whose session is untouched for --cli-stale-hours (12) with no role and not busy or parked is marked stale with the memory its exit returns, and stays running. Never runs as root: the swap reset and root-owned leftovers are printed as the commands to run. --summary prints the TSV rows a desktop front end parses.
beekeeper self-update	Install the latest signed release over this binary; --check only asks.

Every reading command is written for an agent whose context is its scarcest resource: it prints only what the caller has not read. snapshot, sessions, lanes, agents and handover keep a read mark per caller and command (seen.<command>.<caller>.json in the state directory; snapshot.<caller>.json for snapshot): a caller that has read before gets the facts that are new or changed since, the keys of those gone (gone: …), or one no change since HH:MM line. A moving figure (an age, a countdown, a memory size, a context in tokens) is no change. --full prints everything, --json is always complete, handover --prompt is always whole (a successor has read nothing), and a person at a terminal (no Claude session) always gets the whole text. watch says each event once and each lasting condition when it starts and when it ends, across restarts: it keeps its open conditions and one-time events (runaways, stale leases) in the caller's mark (seen.watch.<caller>.json), so a watch restarted after an install resumes silently and says only an ENDED or what is new; watch --once keeps no mark and says every condition it finds. Its lines carry no restated thresholds or explanations, those stay in --help and here.

Marks are per host session (CLAUDE_CODE_HOST_SESSION_ID, else the session): a subagent or claude -p worker inside a session shares its parent's marks, so its reads advance what the parent will see as read. A subagent reading beekeeper passes --full or --json.

Exit codes: 0 done, 1 error, 2 usage, 3 refused (held, not granted, under the floor), 4 relieved (supervisor status in the session a relay relieved), 125 a newer release is out (self-update --check). A claim gates the action it guards: beekeeper lease claim staging -p "database migration" && kubectl …, never a ; between them.

--json prints any command's result as JSON. A session is identified by the environment Claude Code gives its tool commands, and named by its desktop title, the environment's name or the name its CLI's record holds (a claude --bg worker's -n title); a person or a script passes --as <name>.

Every session is a Claude Code CLI of its own: a desktop session, a claude --bg worker (its daemon and terminal hosts are no session) or a headless claude -p. A session is listed under the id and name its CLI's record names, the session the process runs now: a --bg worker the daemon started or woke in its pre-started spare CLI, whose command line names no session, and a resumed CLI that went on under a new id are listed as what they run; a spare no session has claimed is not listed. A CLI that a session started, from its tool shell or through systemd-run, is listed under its own id and name, started by that session, never as that session restarting; a claude -p its tool shell runs without an id of its own is one of that session's commands.

The model server

The host's model servers (ollama, and Lemonade Server where lemonade.url is set) keep a loaded model in the iGPU's memory: system RAM the GPU driver pins, which no cgroup counts or caps. One lab request that names a large model can take the desktop into systemd-oomd. So the model server is a resource like a lab: a session that loads a model on it holds the model-server lease, and the claim says how much it may load.

beekeeper lease claim model-server -p "models-test for model-manager#219" --gib 10 && agentlab models-test
beekeeper lease release model-server

• The budget defaults to ollama.budgetGiB (12); a claim above ollama.maxBudgetGiB (24) is refused.
• beekeeper watch compares ollama's loaded models (/api/ps) with the lease on every sample. Ollama's journal names the client of each load once its request ends; while it still runs, the one client connected to the model server's port is its client (none when several are connected). A kind node's address maps to its lab (the cluster's name, or <name>-1 for the first of a numbered series) and to the lab's holder. A model loaded while nobody holds model-server, loaded by a lab another session holds, or beyond the holder's budget (the largest first) is a MODEL SERVER line. The watch unloads it (keep_alive: 0; the weights stay on disk), unless ollama.nameOnly is set. A load from the host itself without a lease is only named: a person may be using it.
• Lemonade's loaded models (/api/v1/health, sized from /api/v1/models) count against the same lease and budget as ollama's, and the watch unloads them through /api/v1/unload. Lemonade logs no client address: a model's client is the one client connected to its port, none when several are. snapshot and the IGPU GTT line list every server's models under its name; one server not answering hides none of the other's.
• The PreToolUse hook refuses, outside the session holding model-server, ollama run|pull|create|push|cp, lemonade run|launch|chat|load|pull|bench, an HTTP request to a model server's port on a generate, chat, embed, pull or /v1/ path (for Lemonade /api/v1/ chat, completions, responses, embeddings, reranking, load, pull, audio and images), and the agentlab tests in ollama.labTests. ollama ps, ollama stop, /api/ps, lemonade list|unload and /api/v1/health pass.

Kube contexts and production writes

With kube.production set, the machine kubeconfig (~/.kube/config) keeps no current context: a kubectl, helm or flux command without an explicit target fails instead of reaching production. The PreToolUse hook keeps it that way and refuses, with the reason and the explicit form (unset, the kube guard is off and beekeeper snapshot says so):

• A context switch: kubectl config use-context, kubectl config set current-context, kubectl ctx, kubectx <name>, kubectl gs login without --self-contained; and tsh kube login, tsh login --kube-cluster, kind create cluster and kind export kubeconfig when they write the machine kubeconfig (a KUBECONFIG or --kubeconfig of the command's own passes). beekeeper snapshot names a current context the machine kubeconfig gained anyway.
• A write to production, the clusters of the installation kube.production (a context or cluster name with it as a component, its workload clusters included): kubectl apply/create/patch/edit/delete/replace/scale/annotate/label/cordon/uncordon/drain/taint/set/expose/ autoscale/run/exec/cp/attach/debug, rollout restart|undo|pause|resume; helm install/upgrade/uninstall/rollback/test; flux suspend/resume/reconcile/create/delete/bootstrap/ install/uninstall. The target is the --context/--kube-context/--cluster given, else the current context of the kubeconfig the command uses (--kubeconfig, KUBECONFIG in the command or the session). Changes to production go through GitOps pull requests and platformctl; there is no break-glass. Reads (get, describe, logs, top, auth can-i, diff, --dry-run=server; helm list|status|get|template; flux get|logs) and writes to any other cluster pass.
• A kubectl plugin's write to production: kubectl <plugin> … (a first word that is no kubectl command) and a kubectl-<plugin> binary (a path or go run ./cmd/kubectl-<plugin> included), with the same targets as kubectl. kubectl ate delete actor …, kubectl-ate admin make-ca-pool … and kubectl gs update app … are refused; a plugin subcommand that reads (get, list, describe, logs, top, status, version, template, …) and the read-only plugins (tree, access-matrix, resource-capacity, who-can, neat, krew, oidc-login, ns) pass. Every other plugin subcommand counts as a write.

Each guard sees through prefix commands, pipelines and lists, $( ), shell -c strings and here-documents fed to a shell, and kubectl or a kubectl plugin run through a shell function or a variable. Quoted text (a commit message, an issue body) passes.

The Teleport login

When the kube contexts reach the installations through Teleport (tsh kube credentials as their exec plugin), all of them hang on one tsh login, and an SSO login's certificate lives only as long as the role's maximum session TTL. With teleport.proxy set (and teleport.auth, the SSO connector), beekeeper keeps that login:

• beekeeper teleport prints the active profile's user, cluster and expiry from tsh status --format=json (metadata only, never key material) and what the keeper last did; it exits 3 while the login needs a person (expired, under teleport.warnBefore, or the keeper's renewal failed). beekeeper snapshot shows the same line, and beekeeper watch says TELEPORT LOGIN once under teleport.warnBefore (default 1h), TELEPORT LOGIN EXPIRED once it expired and TELEPORT RENEWAL FAILED after a failed renewal, each with one ENDED line once renewed. A merge gate refusal for an unreadable installation names an expired login as its cause.
• beekeeper install writes the keeper, beekeeper-teleport.timer, which runs beekeeper teleport renew --keeper every teleport.every (default 10m); it renews once less than teleport.renewBefore (default 90m) is left. uninstall stops and removes it with the other units.
• A renewal runs tsh login --proxy=<proxy> --auth=<connector> in an empty staging home, because a valid profile makes tsh login print its status only. tsh opens the login URL in the default browser, and a browser holding the SSO session completes it without a click; nothing types credentials. Once the new profile is valid, the staging home and the profile directory (teleport.home, default $TELEPORT_HOME or ~/.tsh) swap in one step, so the old certificate serves until the new one is in place; the profile before is kept as teleport/previous in the state directory, and the person's kubeconfig is not touched. tsh's output carries the one-time login URL: it goes to teleport/login.log (mode 0600) and is never printed.
• The renewal holds the browser lease. A session renewing by hand (beekeeper teleport renew) claims it first; the keeper claims it itself when it is free and granted to nobody, and otherwise waits for its next run, which the TELEPORT LOGIN line names.
• A login that does not complete within teleport.loginTimeout (default 3m: the browser's SSO session is gone, or the sign-in needs a click) leaves the profile as it was. The keeper does not try that login again: it leaves a sign-in note for guide.person that closes by itself once the login is renewed, and the watch says TELEPORT RENEWAL FAILED.
• A login whose SSO callback exchange with the proxy timed out after the browser's sign-in (identity provider callback failed … Client.Timeout exceeded while awaiting headers) is retried once, in the same staging home, before the renewal fails: the first attempt is logged as teleport.retry, and the second appends its output to teleport/login.log.

What the keeper needs: a graphical session whose default browser holds the SSO session (the keeper's unit starts after graphical-session.target and inherits the user manager's display variables), and the profile directory on the same filesystem as the state directory. A headless desk needs a Machine ID bot (tbot) from the Teleport administrators instead; beekeeper does not run one.

Deletes

A delete under a variable that turns out empty removes what it never named: after a failed cd … && D=$(mktemp -d), the cleanup shred -u "$D"/* runs as shred -u /*. The PreToolUse hook refuses an rm, shred, unlink, truncate or find with -delete or -exec rm (also behind sudo, xargs and the other wrappers, in a shell's -c string, a here-document a shell reads and a command substitution) whose target is:

• a path after a variable or command substitution that may be empty: "$D"/*, $D/*, $DIR/, "${X}/…", "$1"/x, "$(…)"/build, unless the variable is guarded (${D:?}, ${D:-/default}) or set -u (set -euo pipefail, set -o nounset) comes before it in the command;
• the root, a top-level directory, the home directory, or every entry of one of them, as written or after a literal assignment in the command: /, /*, /home, /usr/, /tmp/*, /tmp/"$D", ~, ~/*, "$HOME".

The refusal names the command and the target, what the target becomes, and the safe forms: guard the variable (rm -rf "${D:?}"/*), run the cleanup from a set -euo pipefail script with an EXIT trap, or move the files aside instead of deleting them. rm -rf "$D" alone, $HOME and $PWD paths, git clean, git rm, klausctl stop|delete and beekeeper's own commands pass.

Secret reads

A value a command prints lands in the session's transcript and goes to the model API with the next turn; a value written to a file, a variable or the clipboard, hashed or diffed, is one any later command can read or brute-force. One exposed credential is one rotation. For credential tools the PreToolUse hook is an allow list: it refuses every command that touches a secret except the forms below, names the part it refused and gives the safe forms. Every refusal names beekeeper secret: compare or fingerprint for equality, copy or set for changes (Secret operations); rotate is not released yet (#320).

Refused in every form, since beekeeper is the only process that reads, creates, rotates, encrypts and decrypts secrets:

• sops (decrypting and encrypting alike, helm secrets included) and op (op read, op item, op whoami, op run --no-masking, …), also behind sudo, env, timeout, xargs and beekeeper run; age -d and gpg --decrypt. The one exception until beekeeper secret rotate ships: op run -- <command>, whose output op masks; the command it runs is checked as a command of its own (op run -- sops -d x and op run -- kubectl get secret x -o yaml are refused).
• kubectl edit of a Secret and kubectl view-secret.
• A hash (sha*sum, md5sum, b2sum, cksum, openssl dgst) or a diff (diff, cmp, git diff --no-index, …) of a file whose name says it holds secrets in plaintext (secrets.yaml, token.txt, a kubeconfig; code files and SOPS-encrypted *.enc.* or *.sops.* files pass).
• vault beyond status, version, list, kv list, kv metadata get and the kv get/read forms below.

Refused unless their output ends in an allowed form:

• kubectl get of Secrets (by kind, secret/<name>, in a list such as cm,secret, by --raw path) with -o yaml|json or a jsonpath, go-template or custom-columns template that names more than the kind, the type and the metadata other than annotations (which carry the last applied object); kubectl create|apply|replace|patch secret … -o yaml|json; also through a shell function or variable that runs kubectl (kc(){ kubectl --context x "$@"; }, K="kubectl …"), and kubectl get -o yaml of names piped in from a Secret listing.
• vault kv get and vault read; base64 -d of a secret's .data.
• A render fed with secret values: helm template|install|upgrade with a values file (-f, --values, --set-file) whose name says it holds secrets, kustomize build or kubectl kustomize with --enable-alpha-plugins or --enable-exec (which run decrypting plugins).
• Whole command lines and environments, readable by every process: a program started with -e PASSWORD=…, --token … or -p … carries the credential there. ps with its args/cmd/command column (ps aux, ps -ef, ps -eo pid,args, BSD-style words without c, BSD e), pgrep -a, pstree -a, a read of /proc/<pid>/cmdline or environ (ls, stat and wc pass), docker|podman inspect without a --format limited to names and state, and docker ps --no-trunc with the command column. The safe forms: beekeeper ps (below), ps -eo pid,ppid,etime,time,rss,comm, pgrep -l, pgrep -c, docker inspect --format '{{.Name}} {{.State.Status}}'.

The allowed forms: a jq/yq filter that keeps only keys or metadata (jq '.data|keys', .items[].metadata.name, (.value|length); no del(…) or assignment, which print the rest), wc, a consumer that prints nothing of it (kubectl apply|create|replace -f - without -o, --password-stdin, gh secret set, kubeseal, openssl x509 -noout, age-keygen -y), or > /dev/null; for a render also a filter that blanks the Secret data (yq 'del(.data, .stringData)', .data |= keys with .stringData |= keys), so a diff of two blanked renders passes. A file, tee, a variable or a flag's value (T=$(…), --from-literal=k=$(…)), a hash, grep -c|-q and the clipboard are no allowed end. -o name, -o wide, the table and kubectl describe secret (sizes only) pass.

The same holds inside sh|bash|zsh -c, ssh, eval and watch strings and here-documents fed to a shell. Quoted text, comments and other here-documents (a commit message, an issue body) are not commands and pass.

Secret operations

beekeeper secret is how an agent gets a credential job done without reading a value: sops and op run in beekeeper's process, a value stays in its memory for the one operation and is written nowhere in plaintext (sops gets the plaintext on stdin, the file is written from its ciphertext), and an answer is key names, lengths, equality or keyed fingerprints. Every call is a secret.<operation> event in beekeeper log with the session, the references and the outcome, never a value.

A reference is a SOPS file (every value in it), one value of a SOPS file (file#a.b.c, the dotted key path; sops:// in front optional) or a field of the shared 1Password vault (op://<vault>/<item>/<field>). beekeeper reads only the vault secret.vault names, and only as its service account, whose token it reads from secret.tokenFile and gives to its own op calls alone; with either unset, an op:// reference is refused. A SOPS file is encrypted under the creation rules of the .sops.yaml nearest above it, run from that directory, so a path_regex relative to the repository matches.

Command	What it does
compare <a> <b>	equal or different for two values, and for two files each key's state (equal, different, only in a, only in b); exit 1 when anything is not equal.
fingerprint <ref>	HMAC-SHA256 of each value under the value scanner's key (scan/key), cut to 16 hex digits: equal values, equal fingerprints; only beekeeper can make one.
copy <src.sops.yaml> <dst.sops.yaml> [--name n] [--namespace ns]	A new SOPS file with src's values, encrypted under dst's rules; --name and --namespace rewrite a Kubernetes object's metadata. It answers each key and its length (a Secret's data decoded); dst must not exist.
copy <ref> <file#path>	One value into a SOPS path, creating the file or the key when absent, the file's other values kept.
copy <ref> -- <consumer…>	One value on the stdin of gh secret set, a command with --password-stdin or one with --secret <name>=-; any other consumer is refused. It answers the consumer's exit code and its output with the value redacted.
set <file> <path> --generate --vault op://…	A new value (--length, 32; --charset, alnum, hex or ascii) written to the vault field first (the item or field created when absent, the item passed as a JSON template on stdin, never on a command line), then into the SOPS path; it answers the fingerprint.

$ beekeeper secret copy team-a/app.sops.yaml team-b/app.sops.yaml --name app-copy --namespace team-b
wrote team-b/app.sops.yaml: 2 keys
  data.token                                                 40 bytes
  stringData.password                                        32 bytes

What leaves the machine

The same holds for what a session sends out: an issue body, a commit, a chat post, a plan. The PreToolUse hook scans what a call would send for secret values and refuses the call, naming the rule or the phrase that matched and never the match, since the refusal lands in the transcript too:

• the command line, here-documents included, of gh, devctl, git commit, git tag and git remote, also inside sh|bash|zsh -c strings; the body of curl, wget, http or xh (its data flags; a header or URL carries the client's own credential to its service and passes);
• the files these send: --body-file, -F, --notes-file, --input, @file, field=@file and $(cat file);
• for git push, the messages and added lines of the commits no remote has yet (removed lines pass);
• the input of every connector tool (mcp__…: Slack, GitHub, mail, documents), which needs |mcp__.* in the hook's matcher;
• a Write, Edit, MultiEdit or NotebookEdit of a file under outbound.paths (what it writes, not what it replaces).

The patterns are gitleaks' rules by their names: GitHub (ghp_, gho_, ghu_, ghs_, ghr_, github_pat_), GitLab, AWS, GCP, Slack tokens and webhooks, Anthropic, OpenAI, npm, 1Password service account and age keys, private keys, JWTs and a password in a URL (a placeholder such as ${TOKEN} or <token> passes); outbound.phrases adds what is specific to the machine (case-insensitive, named by number). A line marked gitleaks:allow is skipped, for a test fixture that only looks like a token.

An op item|document create|edit or a vault kv put|patch that an outbound.storeDeny rule matches (vault and item globs; a write naming no vault may go to the default one and matches) is refused: some credentials do not belong in a shared store. In an agent session the Secret guard refuses these writes first (Secret reads).

The watch sweeps outbound.sweepRoots (the home directory) outbound.sweepDepth (5) levels deep every interval for world-readable private keys (id_*, *.pem, *.key, *.ppk with a private key header) and git repositories whose remote URL carries a credential, skipping caches and dependency trees: one EXPOSED <path>: <what> line each, never the content, and an ENDED line once it is fixed.

What reaches the model

The guards above refuse command shapes they know; a shape they do not know still prints. The value scanner matches the values themselves. beekeeper keeps an index of keyed fingerprints (HMAC-SHA256 under a key only it reads, scan/key in the state directory, both files 0600) of every value it can reach, each naming the reference to rotate. The index never holds a value. beekeeper scan index fills it from the SOPS files scan.sops names (decrypted by sops -d in beekeeper's own process) and the concealed fields of the 1Password vaults scan.vaults names (op item get --reveal), replacing what earlier runs indexed from them; beekeeper scan add <ref> indexes one value read from stdin. Each value is indexed as written, in its base64 forms, line by line (and the value of a key: value or KEY=value line), and, for base64 text, decoded; values shorter than scan.minLength (12) are not, since they would match ordinary output. beekeeper scan prints what the index holds.

The PostToolUse hook, beekeeper hook posttooluse (beekeeper install registers it for every tool), runs on each tool result before the model sees it. It splits every string of the result into candidate strings (the tokens between whitespace, quotes and brackets, and their parts between =, :, @ and /), fingerprints the candidates of an indexed length, and runs the outbound guard's token patterns beside them for values the index does not hold (a line marked gitleaks:allow keeps its pattern matches). With a hit, the hook replaces the result with the same result, each hit replaced by [redacted: <reference or rule>], and the session goes on: the value never reached the model, so ending the session would protect nothing more. Claude Code writes the replaced result to the transcript on disk as well (checked with Claude Code 2.1.286), so the value is in neither. Each redaction is a scan.redact event naming the tool and the references and rules with their counts; an indexed reference also gets a rotation note for guide.person, one open note per reference. It is still a filter, matching known values in known encodings: a value split across tokens or encoded otherwise passes.

beekeeper scan sweep reads every transcript under claude.projectsDir (the sessions' and subagents' .jsonl files, each line's strings decoded, and the spilled tool results in tool-results/) and prints each reference and token rule it finds, with how often and in how many files, never a value or where it was: the list of what leaked before the hook ran.

Questions go to the guide

A question put to the person with AskUserQuestion blocks the session until the person answers, and the person talks to one session only: the guide's. The PreToolUse hook refuses AskUserQuestion in every session but the one holding the guide role (beekeeper guide, matched by the CLI session id or the desktop id), and tells the agent to file the question for the guide and carry on:

beekeeper note add --for <guide.person> "<the question, every issue or PR as its full URL>" --status-quo "<what is true now>" --why "<why it needs them>" --option "<choice>: <consequence>" --default "<the action if nobody answers>"

With no guide running, every session is refused. The hook reads the state only for this tool and for the calls below that do work, and a state it cannot read counts as not the guide.

The guide asks and relays, it never works itself

The guide's job is to put decisions to its person one at a time and relay the answers word for word. In the guide's session the hook refuses the calls that do work: Edit, Write, NotebookEdit, git commit and git push, devctl pr merge and release promote, gh pr merge and review (at a command position or inside a -c string), a GitHub connector tool that merges, reviews or pushes, and a browser action (claude-in-chrome) other than opening, reading or looking at a page (navigate, read, find, a screenshot or scroll). The refusal says to hand the work to the supervisor in one line. Questions, notes, SendMessage, reads and beekeeper pass; other sessions are not affected.

The guide's own AskUserQuestion gets the checks of note add --for <person>: each question asks, carries a Status quo: … and a Why: … part in its text, a Checked: … part for a claim that something is merged, green, released, rolled or closed, and the full URL of every #N or owner/repo#N; each option's description is its consequence. A question that lacks one is refused, naming what it lacks.

beekeeper guide next serves one decision at a time: the open note for the person due first (by due time, then the undated in filing order), marked as being asked. It serves the same note until it is answered (note answer) or closed (note done); only then comes the next. Only the guide's session serves decisions.

The merge gate

Sessions keep typing devctl pr merge <owner/repo> <n> [flags]; beekeeper never replaces devctl. devctl release promote <owner/repo> (one repository, no --dry-run) passes the same gate: it queues in its repository's lane and runs like a merge, and the stable release it dispatches settles the lane as a merge's release does; a promotion of several repositories or of a --team runs ungated. The PreToolUse hook rewrites the call to <this binary> gate -- devctl pr merge … (a background call gets --wait 30m), and the gate decides. The hook finds the merge wherever it runs as a command: in any part of a pipeline or a ;, && or || list, in a subshell or a loop, behind the prefix commands that run their arguments (flock <lock>, nohup, setsid, stdbuf, ionice, chrt, nice, timeout, env, time, command, exec, VAR=value, each with its options), and with devctl named by path (~/bin/devctl, ./devctl, $HOME/bin/devctl). It wraps only the devctl invocation: flock m.lock devctl pr merge o/r 7 | tee m.json | jq .verdict becomes flock m.lock <this binary> gate -- devctl pr merge o/r 7 | tee m.json | jq .verdict, so the pipeline and pipefail behave as written and the gate's exit code and devctl's document reach the rest of it. A merge inside a sh, bash or zsh -c string that the rewrite cannot reach is refused, the refusal naming the command with the gate written in.

• Refused, exit 77, one line starting beekeeper gate: refused, that says why and what to do: the repository, its lane, merges or github is held, or a cluster upgrade runs on the lane's installation (the hold's reason); the GitHub budget is unknown, checked before devctl makes a single request (under github.floor the line says queued instead: the merge waits for the reset in a run of its own, as for exit 76 below, and wakes its owner); the lane's installation cannot be read (a lapsed tsh login). Nothing else stops a merge: a lane whose release has not rolled past merge.settleTimeout keeps it waiting, and watch says LANE STUCK.
• Queued, exit 76, one line starting beekeeper gate: queued, with the merge's position and whom it waits behind (when the machine-wide devctl cap is the reason, <n> devctl processes run machine-wide (cap <n>), not a lane problem), once the merge has waited --wait (2 minutes, 30 in the background). The merge is not dropped: the gate hands it to a run of its own outside the caller, the same gate under --queued, which keeps its place for up to merge.seedTTL, runs devctl when its turn comes and wakes the owner with the outcome (devctl.unheard, as below). Nobody runs it again; a second devctl pr merge of the pull request while it waits is refused with exit 3.
• Otherwise devctl runs once, its JSON document and exit code (devctl's own 0–9) unchanged, and the event log records merging and merged with the release. devctl serves the repositories of merge.devctlOwners only (its GitHub App login reaches the giantswarm organisation); any other owner's repository takes the plain squash merge instead, in the same place and unit: as the gh login, it waits up to --timeout (45m) for the head's checks, refuses what devctl refuses before its wait (a draft, a closed, merged or conflicting pull request: 3; another person's: 5), and squash-merges green with the judged head as the expected one and <title> (#<n>) as the subject, then deletes the branch; red is 1, a timeout 2, a gh failure 7, and it waits for no release. Each run's stderr and document are kept in <state>/merge-output/<repo>-<n>-<time>.log for 7 days, named in its event. A run that ends with nothing merged (exit 1–4, 7, 8) is merge.failed and keeps its place: lanes shows it retrying, and the session's retry of the same pull request runs before every merge that was behind it. It holds the lane for merge.queueTTL from the failure, then keeps its place for merge.seedTTL without holding up a free lane; devctl's refusal (exit 5) leaves the lane.

A merge runs when no merge before it in its lane's queue holds its place, nothing else of the lane runs, fewer than merge.cap devctl processes run on the machine, and the lane's installation is ready: every HelmRelease of the lane's charts Ready, and the previous merge rolled. Rolled means each HelmRelease of the merged repository's chart that ran the newest version when the merge started now reports the released version, or follows a range that never admits it: the HelmRelease's OCIRepository ref (semver, a tag as that one version) or its chart template's version. A merge that cuts only a release candidate (v4.105.0-rc.3) under a stable range (>=4.0.0 <5.0.0) settles at once, and the gate says production does not follow 4.105.0-rc.3: flux-giantswarm/… follows semver >=4.0.0 <5.0.0; a wait names the range. A release devctl could not confirm (exit 9, a run killed by the tool timeout) settles for merge.settle instead. Versions compare as semver: a tag v4.74.0 matches a chart version 4.74.0+971d12027db0. The installation is read with kubectl --context <lanes[].context> (default: the kubeconfig context named after the installation or ending in -<installation>). A merge whose lane has no installation has nothing to roll and leaves its lane when devctl returns. A settling merge leaves its lane once the lane has settled: watch checks every poll, logs lane.settled, and lanes then shows the lane free before its next merge arrives.

A free lane never idles for a merge that is not there. A place holds against the merges behind it while its merge is in the gate or was within merge.queueTTL (a rerun after exit 76, the retry of a failed run), and a merge registered with lanes settle always does. A place seeded with lanes queue --for whose merge has not arrived holds up only the seeds behind it, so seeds keep their order among themselves, and never an earlier pull request of its own session and repository, which cannot arrive first; an arrived merge that was not seeded runs ahead of it, and merging names the places it passed.

A merge the gate did not wrap leaves its lane looking free while its release rolls. beekeeper lanes settle <owner/repo> <n> registers it: until the pull request is merged it heads the lane, so its own devctl pr merge (a retry of a failed run) passes the gate as the lane's next merge and the others wait behind it, through a lane hold's refusal too. Once merged through the gate, it settles like any gated merge; merged outside it, GitHub reports no release, so the lane settles for merge.settle from the merge and then frees once its HelmReleases are Ready. A merge waiting behind the entry asks GitHub (gh pr view) at most once a minute; a pull request closed without a merge leaves the lane. The same holds for every place whose merge is not in the gate (a seed, a failed run's retry place, a place kept after its gate left): watch asks GitHub about it at every poll, a pull request merged outside the gate settles the lane (merged … outside the gate) and a closed one drops the place (merge.dropped), so no place waits for a lanes drop.

A gate call keeps deciding by the code it started with only until the binary is replaced: a call waiting for its turn when beekeeper self-update renames a new binary over its path re-executes it, the same process, arguments, stdio and deadline, and the new code finds the merge's place by its session, repository and number. It says continuing under beekeeper <version>. A call whose devctl already runs is never re-executed. A lane that stays stuck anyway (a seed whose session is gone) is flagged: lanes shows it stalled and watch says LANE STALLED once the first arrived merge has waited merge.stallAfter behind places whose merges are not in the gate.

A merge survives its caller. A harness that stops a command kills its process tree, and a session run as a unit takes its cgroup down with it, so the gate runs devctl outside both: a transient user service (beekeeper-merge-<repo>-<n>-…, through systemd-run) runs the hidden beekeeper merge-child, which runs devctl with the caller's environment and directory, its document, stderr and exit code in files under the state directory (merges/); without a user service manager, merge-child runs in a session of its own. The gate follows devctl's stderr onto its own output and records the outcome. When the caller ends mid-merge (SIGTERM, SIGHUP, its pipes closed), devctl merges on and waits for the release, and the gate waits on to record it; when the gate is killed too, watch records the outcome from the files once devctl ended (MERGE RECORDED, a merged or merge.failed event naming the gone gate). Only SIGINT, a person's Ctrl-C, reaches devctl. A run that ends without its document or by a signal (exit 128+n) is judged by GitHub (gh pr view), never by its exit code: merged, it settles its lane with its release unconfirmed and the gate line names devctl release wait <owner/repo> --pr <n>, with no retry place; not merged, it keeps its place for the retry; with GitHub unanswered, the lane settles as for a lost merge.

devctl's blocking waits, pr wait, release wait and rollout wait, run the same way outside their caller, without a queue, their files under runs/. One poller per command on the machine: a wait whose identical command line already runs follows that run (the hidden follow-run, its stderr, document and exit code) instead of starting a second devctl, so five sessions waiting on one pull request cost the budget of one. Whichever of the four it is, its outcome reaches the session that started it. A caller still listening sees the output and exit code as ever; the gate then leaves merge-child a marker. When it does not (a headless turn that ended with the command in the background, a caller killed, its CLI gone), merge-child logs devctl.unheard and wakes the owner, a registered agent, with one line, <command> exit N: <reason> (output in <file>), through agents wake: by name when its CLI runs, else as a headless turn. The reason is the document's verdict and reason (a merge's release), else devctl's last stderr line; the output is kept under merge-output/ for seven days. A second devctl pr merge of a pull request whose merge runs is refused with exit 3, naming that run's start, owner and last line.

A running merge whose gate process and devctl are both gone (killed, or lost with the machine in a reboot) is lost: whether it merged is unknown. watch turns it into the lane's settling merge with an unknown release, one MERGE LOST line and a merge.lost event, so the lane settles for merge.settle and frees once its HelmReleases are Ready; lanes clear <lane> drops it at once.

A merge of giantswarm/devctl opens a tool-release window by itself: a merges hold with giantswarm/devctl excepted, since the release makes every in-flight devctl run refuse until updated. It lifts once no devctl merge runs and the local devctl version reports another version than when the window opened, or once its pull request did not merge: the gate lifts it after a run with nothing merged, and watch (or the next gate call) asks GitHub about a window whose merge ended unrecorded (its gate killed) and lifts it when the pull request is open or closed.

The budget floor uses the last reading in the state when it is younger than merge.budgetFresh (1m, less than one merge's draw at the floor's margin), else a fresh conditional request, which costs nothing when GitHub answers 304; a failed read refuses.

Cluster upgrades

While an installation's clusters upgrade, work on it waits. watch reads the Cluster API clusters of alerts.installations every watch.interval (30s), read-only: one list each of Clusters, KubeadmControlPlanes, MachinePools and MachineDeployments (v1beta2) per installation, in parallel, each installation within alerts.timeout; an installation that serves none of them has no cluster to upgrade. That is 4 lists per installation per 30s, and one list of a cluster's events when its upgrade begins.

A cluster's upgrade begins when its release changes: its release.giantswarm.io/version label differs from the release cluster-api-events last recorded (giantswarm.io/last-known-cluster-upgrade-version), cluster-api-events marks it upgrading (giantswarm.io/cluster-upgrading: "true", from the release change until its control plane and workers have rolled), or its scheduled upgrade is due (alpha.giantswarm.io/update-schedule-target-release differs from the label and …-target-time has passed). It ends once none of that holds and its control plane and node pools have rolled (every KubeadmControlPlane at its spec.version, every control plane and node pool with all replicas up to date, no RollingOut condition True). A workload cluster on an older release than its management cluster is not upgrading. The release it upgrades from is the one the label changed from, else the one cluster-api-events' Upgrading… event names.

While it runs, the installation is held: a hold upgrade:<installation>/<cluster> by beekeeper watch, until the upgrade ends, whose reason names the cluster and both releases. The merge gate refuses the merges of every lane whose installation it is (exit 77, with the reason), lease claim <installation> is refused unless an upgrade-unblock grant admits it (below), lanes shows the lanes held and snapshot the upgrade with its progress. The watch whose update sets the hold says UPGRADE …, the one whose update lifts it UPGRADE ENDED …, so a second or restarted watch says neither again. An unreadable installation is one UPGRADES <installation> unreadable: … line until it answers again and keeps its holds as they are: it counts as neither upgrading nor quiet. hold set refuses an upgrade: target; hold lift upgrade:<installation>/<cluster> lifts one by hand (a workload cluster's roll stuck on a drain need not stop the installation's merges): the hold stays lifted, recorded with who lifted it, until that upgrade ends, and only a different upgrade of the cluster (another target release) holds the installation again. hold list and status show the lifted hold and who lifted it.

The one claim an upgrade admits is the work that unblocks it: a node drain stalled on a single-replica PodDisruptionBudget, for example, needs a pod deleted on that installation. The supervisor grants it with beekeeper lease grant <installation> <session> --upgrade-unblock "<why>"; beekeeper refuses that grant from any other session and while no upgrade holds the installation. During the upgrade only such grants are claimed, in their order; a plain grant, the supervisor itself and a person stay refused. The reason is kept on the grant and on the lease: lease list, handover and the log's lease.grant and lease.claim show it next to the claim's purpose.

A lab lease names its kind cluster under labs (agentlab-1: agentlab). lease list and handover then show each lab lease with its cluster, whether that cluster runs and who holds the lease, and list a running kind cluster no lab lease maps as unmapped; a claim of a lab lease names the cluster it covers, and free marks a running cluster whose lease is free as idle, with its last holder from the event log. Without labs nothing asks docker.

Desktop notifications

beekeeper watch --notify sends the events that need a person to the desktop's notification service (org.freedesktop.Notifications on the session bus: dunst, mako, GNOME, KDE) and still prints every line. Each notification carries a summary, the session or resource involved and the command that shows more.

Kind	Event	Urgency
due	a note or a timer falls due	normal
budget	the GitHub budget under the floor	normal
stale-lease	a lease whose holder's session is gone	normal
no-supervisor	a supervisor whose CLI stayed gone past supervisor.restartGrace with no relay open: claims stay gated until a successor starts; again after notify.repeat while it lasts	critical
page-unowned	a firing alert at alerts.pageSeverity, of alerts.team when set, that no session has owned (beekeeper alerts own) for alerts.ownerGrace; again every alerts.ownerGrace while it stays unowned	critical

Nothing routine notifies: sessions starting or ending, alerts other than an unowned page, relays. The machine's lines never notify: memory, swap, OOMD IMMINENT, OOM kills, load, CPU, processes, tmpfs and disk are the supervisor's to act on, and its watch says them; a person gets no pop-up they cannot act on. Each event is one notification however many watches run --notify on the same state: the first to claim it in notify.json (under notify.lock) sends it. A lasting condition (budget) and a supervisor gone (no-supervisor, per supervisor) notify again after notify.repeat. Quiet hours hold every notification that is not critical and send what they held as one notification when they end. With no notification service on the bus the watch runs on, prints its lines and says so once. notify.json also keeps the last 20 deliveries with the id the service returned.

When no supervisor runs, the same watch runs as a systemd user unit, contrib/systemd/beekeeper-notify.service, with --standby: while a supervisor's session runs it leaves the notes, timers, session records and relays to the supervisor's watch and never reads the alerts, so it takes nothing from the supervisor's view; what both see (the budget, stale leases) is sent once. A supervisor runs its own watch with --notify too. beekeeper install writes and starts the unit with the binary's path; journalctl --user -u beekeeper-notify -f shows its lines.

A supervisor gone

Claims stay gated from the first supervisor start until a deliberate supervisor stop: a supervisor whose CLI crashed keeps the grant rule in force until a successor's supervisor start, so no claim goes ungated in the gap. Once its CLI has been gone longer than supervisor.restartGrace with no relay open, the watch says SUPERVISOR GONE once, naming the supervisor and that claims are gated, and sends a critical no-supervisor notification, again after notify.repeat while the gap lasts. A supervisor back, the same one or a successor, is SUPERVISOR BACK, once. beekeeper handover --prompt is what a successor starts from.

Fresh successors, and a supervisor started again without a click

Every run of a role is numbered: "Supervisor run N" and "Guide run N", N one above the highest run recorded (the state's run, the names of the holder, its relay and the holders it relieved, and the holder's desktop title). supervisor status and guide status name the run. A start in a session not named as that run is the next run: the session keeps the name its CLI takes messages under (its -n name), and a steward sets its desktop title to the run's name. No session is kept in reserve or repurposed: a relay and a crash both start a fresh session.

• Relay: supervisor relay (guide relay) starts " run N+1" and opens the relay to it. Its brief has its first turn, which runs headless, take the role with <role> start and end at once: a headless turn that arms a watch never ends, so the desktop never gets the session's CLI, and opening its row would start a second CLI on the same session. The reopen after that turn warms its desktop CLI, and the standby watch sees the holder's CLI back under a new PID and sends it beekeeper: your CLI restarted (…) and its watch is gone. Run beekeeper handover --prompt and follow it. (RESUME).
• Crash or CLI exit: once the holder's CLI has been gone past its restartGrace (30s, a debounce for a session someone woke: the app never restarts a crashed CLI) with no relay open, the standby watch starts the next run the same way, with the relay from the gone holder, once: the open relay keeps later polls and a restarted watch from starting another. SUPERVISOR GONE (and GUIDE GONE) say so, and SUCCESSOR (SUCCESSOR FAILED) says how the start went. A session whose headless turn of beekeeper's start or wake runs is not gone; the reopen after that turn, which waits while the desktop's window has the focus (up to 25 minutes), is no turn: the restartGrace covers it. Claims stay gated until the successor's supervisor start.
• A successor that does not come up: a successor starts in <role>.dir, else in the folder its predecessor's desktop session started from: never in the worktree the desktop made for the predecessor, whose branch the desktop cannot check out for a second worktree, so it would never warm the successor's CLI. The resume goes to the desktop CLI, never to a headless turn of beekeeper's. A successor whose first turn ended with no desktop CLI past the restartGrace (its reopen waits on a person working in the desktop's window, or the desktop did not warm it) is not replaced: the standby watch resumes it headless with the same message (agents wake, RESUME), and that turn keeps the role's watch and its CLI, with no click or decision by a person. The pending reopen then yields to that turn, so the desktop warms no second CLI beside it; the wake's own reopen follows the turn, and each later gap without a CLI is resumed headless again until the desktop runs the holder's CLI. One whose resume never ran did not come up (SUCCESSOR DOWN): the first is one note for guide.person, the next successor starts 5 minutes later, the one after 10 minutes, and after three none starts until a holder runs again.
• Reboot or app restart: the login unit contrib/systemd/beekeeper-supervisor-open.service runs beekeeper supervisor reopen, which starts the app on the recorded supervisor's session (claude://code/continue?session=local_…); the standby watch opens it the same way once when it sees the app started after the supervisor's CLI stopped: after the CLI was first seen gone, or with the watch never having seen that CLI run under this app, as after a reboot, where the app starts at login before the standby watch's first poll. Every CLI is cold after an app start, so the focus starts the supervisor's; the standby watch sees its CLI back under a new PID and sends it the same RESUME. A supervisor not back within 3 minutes of the reopen gets a fresh successor.
• Stopped workers: a registered agent with a task whose CLI does not run (a claude --bg worker a reboot stopped, a desktop session closed) does not come back by itself. watch says AGENTS STOPPED once per agent, and the handover --prompt Agents section marks it, each with how to resume it: claude --bg --resume <session> "…" for a background worker, its claude://code/continue link for a desktop session. Nothing is resumed automatically: a burst of resumed workers after a login is the supervisor's call against the machine's memory.

The command-line send is one headless claude -p turn whose only tool is SendMessage, addressed by the name ListAgents shows (the session's title): Claude Code has no send command, and its peer messaging is not a documented interface, so it is isolated in internal/peer.

curl -fsSL https://raw.githubusercontent.com/giantswarm/beekeeper/main/contrib/systemd/beekeeper-supervisor-open.service |
  sed "s|%h/.local/bin/beekeeper|$(command -v beekeeper)|" > ~/.config/systemd/user/beekeeper-supervisor-open.service
systemctl --user daemon-reload
systemctl --user enable beekeeper-supervisor-open.service   # runs at the next login

beekeeper status --bar prints one row for a desktop bar (waybar, polybar, i3blocks), the same shape as the rows of free --summary, so one bar module reads both. The contract is fixed: five tab-separated fields, always present, in this order.

Field	Value
1	beekeeper, the row's key
2	the supervising session's name; - when none is recorded; !<name> when the recorded one's session no longer runs
3	the number of leases held
4	the number of holds in force
5	the number of notes and timers whose time has come

Agents started without a click

beekeeper agents start <name> <brief file> starts an agent the way a person would start a session and hand it a brief, without the click. The first prompt is the worker rules beekeeper ships (the worker-rules skill, under the binary's version), then the brief as the task, so a brief carries only its task and reports to the supervisor, whoever holds the role by then; a hand-over puts the rules ahead of the follow-up's prompt again. The first turn runs from the command line in bypass, and the roster shows it busy with its --task from the moment it is started. The session is then a desktop session as well: the person reads and answers it in the sidebar.

The roster is the view of which agents work, not the sidebar. Claude Desktop marks a row working only while its own CLI of the session runs a turn; its session record holds no state another process could set. A first turn (and a wake turn of agents wake) is a claude -p outside the desktop, so the row shows the session idle while it works. The desktop has no route that runs the brief as a desktop turn of the imported session instead: claude://resume imports a session without a prompt, claude://code/new?q= fills the composer of a new session under an id of the desktop's, and a message to local_<id> (SendMessage, the session tools' send_message) is a turn another desktop session's model sends, labelled as that session's message, under the desktop's cap of CLIs and of sends since the person last typed. beekeeper agents shows such an agent live, first turn running or live, wake turn running and says under its table how many agents are in a headless turn; --json marks each with headlessTurn.

The import makes the desktop warm a CLI of its own for the session (--resume=<id>) while the first turn still runs. Two CLIs on one session id are two peers under one name, and a message by name could reach the desktop's copy, which would run a turn beside the first turn. So once the import has shown the session, beekeeper stops the desktop's CLI (it waits up to 15s for it) while the first turn runs: the first turn is then the session's only CLI, and a message by name, such as a grant or a clearance, reaches it at its next tool call. Once the first turn has ended, the unit's ExecStopPost runs beekeeper agents reopen <id>: it shows the session in the desktop for a moment and switches back, which warms the desktop's CLI of it, so the session is a peer again and takes a follow-up task by message as a desktop turn. It reopens only a start the roster still holds, never one a hand-over or agents remove took off. A reopen the desktop did not take (the session not shown, its title not restored) is an agent.reopen event and ends the unit successfully: the turn ended as it should.

The desktop handles each claude://resume link twice. When the second delivery arrives while the first import still runs, both import, the second drops the transcript's title and model as stale (the first touched the file), and the desktop keeps its untitled record: the session shows untitled in the sidebar and to ListAgents under a default name (<dir>-<n>), which a message by its name does not reach, even when the record file showed the title for a moment. The desktop rereads neither the transcript nor its record files, and a record without a model gets no CLI when the desktop shows it (only a preview shell), so the session cannot be asked to retitle itself. Every CLI the desktop runs, though, has the desktop's session tools (mcp__ccd_session_mgmt__set_session_title, archive_session), and they act on any session by its id. So agents reopen checks the record once the first turn has ended and, when it lacks the roster name, asks a steward through its socket ($XDG_RUNTIME_DIR/cc-socks/<pid>.sock) to set it, then waits up to 80 seconds for the desktop to record it. A steward is a model and can decline a request from another session, so an unanswered request goes to the next steward, three at most (the unit's TimeoutStopSec is 5 minutes). The steward is the session's own desktop CLI when the desktop warmed one. Otherwise it is the idle desktop CLI of another session beekeeper started, a finished worker off the roster before an idle roster agent (whose brief can forbid the call), each idle longest: transcript quiet for 30 seconds, no tool command, no headless turn, no task on the roster. It is never the supervisor or the guide, nor one relieved within 7 days (it follows its role's rules still), nor a session its person started, nor a session handed over (a later start or another roster session carries its name): a request would have the desktop run a turn of it, and start its CLI again, beside its follow-up under the same name. A title set that way is the desktop's "set by an agent", which its own titling never overwrites.

agents remove archives the removed agent's desktop session the same way (archive_session; the desktop's Archived list brings it back), and prints and logs (agents.archive) what it did. It does so only for a session beekeeper started that runs no turn and holds or held no role, unless a relay relieved it; --keep-desktop leaves it in the sidebar. When no steward is idle it says so and the removal still stands; the doctor then owes the archive (below).

beekeeper doctor does these chores by rule, and every watch poll (not --once) runs it in the background, one DOCTOR line per thing it did. It takes an agent off the roster once it reported its work finished with agents idle --done and its CLI runs no turn, once it was relieved of the supervisor's or the guide's role (a relieved role relays, it never hands over), or once it stayed idle agents.staleAfter (24h) with no CLI running; the desktop sessions beekeeper started for the finished and the stale ones are archived in one steward's turn, under the rules above. An entry kept on purpose is never removed for staleness and its desktop session never archived by the doctor: beekeeper agents keep <agent> [--until <time>] [--reason <text>] marks a judge or reviewer session a person returns to, a spare or a worker parked on a long external wait, and an open timer that wakes the agent by name (timer add --wake) keeps it the same way until the timer is done. agents shows what keeps an entry in its KEPT column, doctor --dry-run names each kept entry it leaves, the watch says no AGENTS STOPPED line for one, and board next counts its sessions serve record as covering its item. agents keep <agent> --no-keep lifts the marker and returns the entry to agents.staleAfter. An archive that stayed (the CLI ran a turn, no steward recorded it, also after agents remove) is owed: the doctor asks for it again on its later runs while the CLI runs no turn, in the same steward's turn, until the desktop records it, up to 5 stewards' turns 10 minutes apart within 24 hours, each try a DOCTOR line and an agents.archive event with its reason; an agent back on the roster or the session archived by hand is owed nothing. The old session of an agents handover and the run of the supervisor or the guide a relay relieved (once its successor took the role) are owed the same way, so a relieved run frees its desktop CLI slot. A session beekeeper started whose desktop record shows another title than its roster name gets the name back through a steward, at most every 30 minutes per session. Each fault of doctor.faults is probed (the probe exits 0 while the fault is absent); a failing one whose remedy may run unattended is remedied and probed again, any other only with doctor --fault <name>, and a fault still failing is one note for guide.person, closed once its probe passes, and one DOCTOR FAULT line while it lasts. --dry-run says what it would do. A note for the person that asks nothing (no question mark, no --option, no request verb opening it) is refused: a status line goes to beekeeper log add "<text>".

The desktop's import takes the session's model from the transcript's last reply and falls back to its own default model without one. So beekeeper imports the session only once the transcript holds its first reply and has stayed unchanged for 2 seconds (up to 5 minutes), and says which model the desktop recorded for the desktop turns. Claude Desktop on Linux currently handles each claude:// link twice, and the second of the two concurrent imports records no title and no model. So once the import is done, the start has a steward, an idle desktop CLI of another session beekeeper started (the desktop refuses a session's switch of its own model), set what the record dropped: the title to the agent's name and the model to the one its first turn ran on (set_session_title, set_session_model), and says which steward did, or why none could; the reopen after the first turn tries again for a model still missing.

The import switches the desktop's main window to the new session. Once it has (up to 15s), beekeeper switches the window back to the session it showed before, the last focus change in the desktop's log (claude.desktopLog, ~/.config/Claude/logs/main.log), so the person keeps working where they were; the new session waits in the sidebar. A desktop that showed no session, or that the start had to launch, stays on the new one.

Neither link goes while the desktop's window has the focus (Hyprland's active window, hyprctl activewindow, app id com.anthropic.Claude): a switch there would land under someone reading or typing, whose keystrokes then reach another session. Nor does one go until the person's keyboards and pointers have been idle for desktop.typingQuiet (30s): a stray keystroke would go into the window the link opens. beekeeper reads only when an event arrives on /dev/input/event* (the devices with keys or relative motion; the user needs the input group), never which, and grabs no device; it watches from the start, so a first reply after quiet input imports at once. Input that cannot be read stops the start before it runs anything, with the reason; desktop.typingQuiet: -1s opens the links without watching the input. The import waits up to 2 minutes for the window to lose the focus and the input to go quiet; past that the start ends without it (not imported yet, with what held it), and the reopen after the first turn imports the session instead, waiting up to 25 minutes more (the unit's TimeoutStopSec covers the wait). While it waits, the agent records what holds it and until when: agents shows it not running, import waits until <t>, the watch says IMPORT WAITS once per wait, and a lease grant or a message by name to the agent says that no CLI of it runs and that its import is pending. A reopen that waits it out is recorded as missed. Without a Hyprland session there is no focus to ask, and the links go at once. A locked screen is no focus: under a running screen locker (hyprlock, swaylock, gtklock, waylock) the compositor still names the window focused before, nobody reads or types there and keystrokes go to the locker, so the links go at once, without the desktop.typingQuiet wait.

A worker whose next turn needs the desktop (its browser: the Claude in Chrome tools exist only in a desktop CLI, never in a headless turn) does not wait for the window's focus. It is started with agents start --desktop, or asks with beekeeper agents desktop before its headless turn ends (beekeeper agents desktop <agent> asks for another agent): its import and reopen wait only for the person's input to pause, 1 minute at most, show the session for a moment and switch the window back. A reopen already waiting goes ahead within a second, and an agent with neither a CLI nor a waiting reopen is shown at once; the ask ends once the desktop runs its CLI, so its next message or grant reaches that CLI.

A reopen checks for the CLI its show warms (up to 15s). The desktop runs at most a cap of CLIs (its CliGovernor, 28 here): at the cap it starts none for a show and logs at cap=<n>; yielding warm spawn. The reopen reads that line and reports it as missed (the desktop warmed no CLI … it runs its cap of <n> CLIs), and the agent's ask for a desktop turn stays: the CLI starts once a person opens the session or one of the desktop's CLIs ends (beekeeper free lists the stale ones).

A follow-up by message crosses permission modes: the started session runs in acceptEdits, a bypass supervisor sends to it, and it answers back. Claude Code decides each cross-session message on the receiving side by its crossSessionInbound setting; unset, it holds a message from the other permission class for the person's approval, and a headless receiver lets it expire. Set it once in the user-level ~/.claude/settings.json (a project or local settings file can only tighten it):

"crossSessionInbound": "accept"

Every message between the user's own sessions is then delivered, whatever the two modes; each session's tool permissions stay its own.

Claude Desktop's import turns bypassPermissions into acceptEdits for every desktop turn, with no setting to change that, and raising the mode again takes the person's approval card each time. So in its desktop turns such an agent would stop at the first request no allow rule covers. beekeeper hook permissionrequest answers those requests.

What the hook allows: every request that would otherwise show a permission card, and nothing else, only in sessions whose id beekeeper agents start recorded together with the mode bypassPermissions it passed at start, and only while such a session runs in acceptEdits, the mode the import gives it. That is exactly what the session's bypass start already allowed. Its subagents share its session id and are answered the same way. Each allow is a hook.allow event in beekeeper log, naming the session and the tool.

What it leaves to the person: every other session gets no answer and the normal card: desktop sessions, sessions started any other way (a claude -p in bypass that beekeeper did not start included), beekeeper's starts the person set to default or plan, and starts older than 30 days. Deny rules still win: Claude Code refuses a denied call before it asks, so the hook never sees it. The desktop's own consent cards (raising a mode, deleting a session) are the app's, not permission requests, and the hook cannot answer them. On malformed input or an unreadable configuration or state the hook gives no answer, never an allow; a request in any mode but acceptEdits is decided without reading the state, and the state is read without its lock, so a permission request never waits on beekeeper.

A session cannot add itself: its id enters the record only through the start that created it, written under the state lock before the session existed.

The browser is the desktop's, not a permission request. Claude in Chrome's site requests (browser:navigate, one per session and site) are held by Claude Desktop itself, in the session's desktop row; Claude Code's permission layer never sees them, so neither bypassPermissions nor the hook answers them. The import gives a start the Chrome permission mode skip_all_permission_checks only when the desktop allows all browser actions, a desktop-wide choice a person makes with "Allow all sites" on one site request; otherwise it records no Chrome mode, and each navigate to a site the session was not allowed on yet waits for a person (with nobody there, until the desktop aborts it hours later and the model reads "Claude in Chrome is not connected"). Read-only calls such as tabs_context_mcp never ask. beekeeper does not raise the mode itself: switching another session's permissions takes the person's approval in the desktop. agents start says which Chrome mode the desktop recorded, and beekeeper agents shows it per agent in its BROWSER column: asks or skips.

The same hook serves the person's take-over on beekeeper ui: while a running screen has taken a session over (a flag file per session in the state folder's takeover/, naming the screen's process), the hook holds that session's request for the screen and answers with the screen's allow or deny. It gives up itself after 290 s, and at once when the take-over is released or the screen is gone: no answer, and the request goes to the session's own window. Telling a session not taken over reads that one file, without a lock; nothing waits on beekeeper.

Install it in ~/.claude/settings.json, next to the PreToolUse hook (beekeeper install writes it); the timeout is above the hook's own 290 s, so the hook, not Claude Code, ends a held request:

"PermissionRequest": [{"matcher": "*", "hooks": [{"type": "command",
  "command": "~/.go/bin/beekeeper hook permissionrequest", "timeout": 300}]}]

Waking a session

Claude Desktop delivers a SendMessage to a desktop id (local_<id>) itself: it starts the session's CLI when none runs, which makes it the only route that wakes a stopped desktop session, and it caps the route. After ten such sends since its person last typed in the sending session, the desktop answers "Paused until your user's next message", so a supervisor nobody types in loses it within hours. A send by name (a UDS peer) is not capped, but it reaches only a running CLI.

beekeeper agents wake <agent> "<message>" covers both. A session whose CLI runs gets the message by name. For a session with none, beekeeper resumes the session's own CLI from the command line: one headless turn, claude -p --resume <id>, continuing its transcript under the same id, as agents start runs a first turn. Once the turn ends, agents reopen shows the session in the desktop for a moment, which warms its desktop CLI, and later messages by name reach it. A wake while the unit starts, before its CLI is a peer, is refused (exit 3): send again in a minute.

The desktop also starts a CLI for a local_ send while a headless turn of that session runs (a first turn, a wake): two copies of one session then run turns side by side. The PreToolUse hook therefore sends a SendMessage to a local_ id whose session has a running CLI to that CLI by its name (updatedInput), which queues the message in the running turn. A name that two running CLIs carry is refused with their PIDs, since a send by it reaches neither for sure. A send to a session with no running CLI passes to the desktop, which starts it.

A repository's instructions on the first write

Claude Code loads the instructions of the project a session started in, not those of another repository the session goes on to change. The hook closes that gap: a session's first Edit, Write or NotebookEdit, or first git commit (in the call's directory, behind cd <dir> && or with git -C <dir>), in a git repository other than $CLAUDE_PROJECT_DIR carries that repository's instructions as additionalContext, once per session, subagent and repository:

• CLAUDE.md, AGENTS.md and .claude/CLAUDE.md, with their @path imports three levels deep;
• .claude/rules/**/*.md;
• the hooks and permissions of .claude/settings.json, which do not run in the session;
• the files these name, linked or in backticks, on a line that makes them mandatory ("must read", "read … first", "mandatory", "always read", "required reading").

The context is at most 10,000 bytes: a file that does not fit is cut with a note naming it, the files after it are listed for the agent to read. Only regular text files inside the repository are read: no symlink out of it, no .git, and no name that holds or may hold a secret or a person's own setup (settings.local.json, *.local.md, .env*, keys and certificates, sops files, anything named secret, credential, password, token or kubeconfig). The call's permission is untouched: a rewrite such as the build slot or the merge gate carries the context beside it, a refused call carries none and does not count as the first write. The markers are one file per session and repository under <stateDir>/reads/, created exclusively so two concurrent calls inject once; a session's markers go 7 days after its last first write.

Register the hook for its six tools:

"PreToolUse": [{"matcher": "Bash|Edit|Write|NotebookEdit|AskUserQuestion|SendMessage|mcp__.*", "hooks": [{"type": "command",
  "command": "~/.go/bin/beekeeper hook pretooluse"}]}]

Agents handed over near their context limit

Every registered agent's context (the CTX column) is watched, not only the supervisor's and the guide's. Once an agent session's context reaches agents.relayAt (default supervisor.relayAt), watch says HANDOVER DUE "<agent>" at <n>k: beekeeper agents handover "<agent>" at the agent's first quiet moment: no tool command of its own running and no gated merge of its own in flight. An agent with a task whose CLI no longer runs (its headless turn ended while it waits on a grant or a person) is measured by its transcript and is due the same way, with (its CLI does not run: …) in the line. It says it once per agent session, across the watch's restarts. An agent holding the supervisor's or the guide's role moves by relay instead.

The supervisor then runs beekeeper agents handover "<agent>". It refuses (exit 3, before it asks for anything) unless a PermissionRequest hook for every tool runs beekeeper hook permissionrequest where the follow-up starts: in the user settings or in the .claude/settings.json or settings.local.json of its folder or of the checkout that folder is in. Without it the follow-up would stop at its first card after the old session was stopped. Otherwise it prints one line per step:

1. The note. A peer message asks the agent to record what is in flight and what is next with beekeeper agents note "<...>" and end its turn; the hand-over waits agents.noteWait (3m) for it and carries on without it after that. The ask is one headless relay turn; a turn that called no SendMessage sent nothing and is run again, three turns at most. An agent whose CLI does not run, or does not take the message by name, is asked in one headless turn resumed from its transcript instead (as agents wake does, without the desktop's reopen), which is stopped once the note is written or the wait is over. Without a note the step says what the follow-up's prompt rests on: the task, the sessions serve record (the issue and what it waited on) and the last events. The command exits non-zero whenever no follow-up was started.
2. The prompt. beekeeper agents handover --prompt "<agent>" prints it: the roster task (of an idle agent the last task it reported idle on, which a repeated agents idle or a re-register keeps), the brief the agent was started with (a follow-up's brief is its predecessor's, not the prompt around it), its sessions serve record, its gated merges, its last events and its note. No standing rules and no live values: the follow-up is told to check the live state first.
3. The start. The follow-up is started as agents start starts one, in the old session's folder and model, under the agent's name: it takes over the roster entry, the task and the session record, busy with the task. It shows in the sidebar and runs its first turn from the prompt alone.
4. The end. Once the follow-up's transcript holds its first reply, the old session's CLI and every process under it get SIGTERM, then SIGKILL after 10 s, by PID: the desktop shows it stopped. A start or wake unit of the old session still running its reopen is stopped too, so the desktop does not warm a CLI of it again.
5. The archive. Once that CLI has exited, the old session's desktop row is archived through a steward, as the doctor archives a finished worker's, so only the follow-up's row carries the agent's name, also along a chain of hand-overs. A row it cannot archive now (no steward idle, a CLI of the old session running again) the doctor owes and asks for while that CLI runs no turn.
6. The log. One agents.handover event in beekeeper log.

A configuration named with --config or $BEEKEEPER_CONFIG is passed to the started session as $BEEKEEPER_CONFIG and named in the note's command, so both write to the same state.

The scheduled status reporter

With reporter.every and reporter.brief set, the standby watch (watch --standby, beekeeper-notify.service) starts a one-off reporter session once per interval, on the interval's multiples (on the hour for 1h), whether or not a supervisor runs:

1. The start. One headless claude -p turn in bypassPermissions in a transient user unit (beekeeper-report-<id>, its output in journalctl --user -u <unit>), in reporter.dir with reporter.model, registered on the roster as Status report HH:MM, busy with the brief's first line. Its prompt names reporter.person and the interval it covers, then the brief. It is not imported into the desktop: the command-line turn has the claude.ai connectors, and the person's window is not switched every hour. reporter.start in the log, one watch line.
2. The post. The session runs beekeeper report --since <start> --until <end> for its interval, which renders the whole report from beekeeper's state in seconds, and posts its output with the Slack connector, adding at most three sentences of its own judgement: two tool calls. The time range is in reporter.tz, else the machine's zone, read for each run as timedatectl sets it (a running watch keeps no stale zone). The session starts with --settings adding a PreToolUse hook on slack_send_message (beekeeper hook reportcheck) that refuses a post failing beekeeper reporter check, with what to fix: the connector takes standard Markdown, so every pull request or issue is a link [<repo>#<n>](https://github.com/<owner>/<repo>/pull/<n>) whose label names the repository and number it links; no bare #<n> or repo#<n>, session names included (a beekeeper note is note <n>), no Slack <url|label> syntax, a first line naming the zone (EEST), no time in UTC. beekeeper sees the post in the session's transcript: a slack_send_message call that returned without an error.
3. The end. Once it posted, beekeeper takes the reporter off the roster and stops what still runs of its turn by PID (SIGTERM, then SIGKILL after 10 s): reporter.posted. A turn that ended without a post is ended the same way (reporter.unposted), and one that has not posted within reporter.timeout (20m) is stopped (reporter.timeout); each is one watch line.
4. A pause. beekeeper reporter final <time> starts one last report at that time, outside the slots, covering the time since the last report started and saying that the reports pause; with its start no scheduled report starts until beekeeper reporter resume (reporter pause pauses at once). A running reporter still posts and is ended. reporter.final, reporter.pause and reporter.resume in the log.
5. No overlap. While a reporter runs, the next slot starts none: reporter.skip once. The slot after its end starts the next one; the state's report keeps the current or last run, so two standby watches start one reporter per slot.

omp agents

omp (oh-my-pi) is beekeeper's second local harness beside Claude Code, for agents on a locally served open-weights model or any other provider omp speaks. Every omp process that runs a session (no helper subcommand such as omp models or omp ps, no subagent of another omp) shows in sessions, snapshot and free with harness omp, its state (busy while a turn runs, idle while it waits for a message), its title, model, checkout and memory, the tool commands its shells run, and its last hour from its session file (turns, tool calls and failed ones, GitHub calls, tokens, and the cost omp itself counted). tail <session> follows it: the person's and beekeeper's messages and its replies, without thinking and tool output.

omp keeps no record of which process runs which session file and holds none open; its session files (omp.sessionsDir, ~/.omp/agent/sessions/<folder per cwd>/<time>_<id>.jsonl) start with a title line and a header naming the session id, its creation time and its working directory. beekeeper gives each process the file of its working directory it created (the first created at or after the process started), and a process without one the file there written last since it started (a session it resumed). omp writes the file at the first reply, so a session not yet answered is listed without a transcript.

agents start <name> <brief> --harness omp [--model m] starts omp --mode rpc --no-ui --approval-mode yolo --model <m> on --model, else omp.model: an exact selector omp models lists (provider/id, such as ollama/qwen3.5:9b). With neither, or a model omp does not list, the start is refused before anything is recorded: omp's own default and a fuzzy pattern would pick a model nobody named, which may not be served right now. agents and sessions show each session's model, an omp session's from its command line until its session file records one. It runs in a transient user unit beekeeper-omp-<id>, with its stdin on a FIFO inbox (<stateDir>/omp/<id>.in) the unit opens for reading and writing, so the inbox never ends while the agent runs. The agent carries its start id and name in its environment (BEEKEEPER_OMP_AGENT, BEEKEEPER_AGENT_NAME) and is registered on the roster as omp_<id>. A message is one line of omp's rpc protocol, a steer command: omp delivers it at the agent's next tool round while a turn runs and starts a turn with it while the agent is idle. The brief is the first message; agents wake <name> <message> writes the next. Writers take a lock file beside the inbox, so two senders' lines never interleave. A wake of an agent whose process ended is refused (exit 3): nothing reads its inbox, and nothing resumes it. Taking the agent off the roster (agents remove, the doctor) stops its unit and removes its inbox and lock file: nothing resumes an omp agent, so a process left running would only hold its model. The agent's own beekeeper commands act as its roster entry (BEEKEEPER_OMP_AGENT wins over any session variable its tool shell carries), so it reports its work done with agents idle --done like any worker. agents handover refuses omp agents, and no desktop import happens.

An omp session the person started in a terminal shows in sessions and can be followed, but takes no messages: omp offers no way into a running interactive session except its collab link, which goes through omp's relay service.

Session metrics

How each session has been doing, read from what beekeeper already reads, never from GitHub:

Figure	Source
busy time (entries less than 5 minutes apart), turns, tool calls, tool errors and the most repeated failing call, GitHub calls (gh and devctl commands, tools of a GitHub MCP server)	the transcript
tokens (input, cache writes by TTL, cache reads, output) and cost	the transcript's usage fields, once per API response, priced from metrics.models
context: the last request's tokens and their share of the model's window	the transcript
idle time	the transcript's modification time
memory: the process tree's anonymous memory, and each capped run's scope (memory.current)	/proc and the memcap scopes its run.start events name
gh and devctl processes	the process table, attributed as budget does
merges queued, merged, refused and failed	the gate's events in the event log
leases and how long each has been held	the lease directories

The transcript's figures cover its last 512 KiB, the window sessions already reads for what a session is on (since in --json is its first entry, whole says it is the whole transcript), and the last hour of it. sessions --json has them per session, sessions --json and snapshot --json the totals; snapshot names the three sessions that spent the most in the last hour.

Cost is priced per response from the model's entry in metrics.models (US dollars per million tokens). The defaults are the Claude API list prices; a model without an entry, or a fast-mode response without a fast multiplier, makes the cost cost unknown, never a guess. There is no Prometheus export: nothing on the lab machine scrapes one.

Configuration

$XDG_CONFIG_HOME/beekeeper/config.yaml (or --config, or $BEEKEEPER_CONFIG). Every field is optional, and an empty configuration works: watch, snapshot, free, the hook and the coordination commands run with neutral defaults. Memory and disk thresholds default to fractions of what the machine has, and every organisation or desk choice is unset until configured. docs/examples/config.yaml is a complete desk's configuration, every key annotated with what it guards and its default.

The organisation and desk keys, and their defaults:

Key	Default	What it sets
kube.production	unset: the kube guard is off	The installation whose clusters agents never write to, and the no-current-context rule of the machine kubeconfig
kube.contextTemplate	unset: the context named after the installation, else *@<name>	An installation's kube context, {installation} its name (login.example.com-{installation})
alerts.installations, lanes, resources	none	The installations whose alerts are read, the merge lanes, the leasable environments
alerts.installations[].floor	every severity	The lowest severity printed of an installation's alerts
alerts.ignore	[Watchdog]	Alert names that never appear
alerts.quiet	[{severity: notify}] once alerts.team is set, else none	Alerts whose changes are logged, not said
alerts.tenant	unset: only kube-prometheus-stack's Alertmanager	The Mimir tenant (X-Scope-OrgID) whose Alertmanager is read first
github.probeRepo	giantswarm/beekeeper	The repository whose conditional GET reads the budget
github.floor	2500	The budget under which GitHub work stops
merge.devctlOwners	none: every merge is the plain squash merge	The owners whose repositories devctl pr merge serves
supervisor.skill, guide.skill, guide.person	unset	The roles' skills and the person the guide walks through their notes
claude.desktopApp	claude-desktop	The desktop app's executable, which opens claude:// links and starts the app
shell	$SHELL, else sh	The shell the hook runs a rewritten build, test or lint command in
maxKindClusters	one per 40 GiB of RAM, at least one	The kind clusters the hook lets the machine run
memcap.max	14% of RAM	A beekeeper run command's MemoryMax
watch.availMinMiB, watch.scopeAnonMaxMiB, watch.gttMaxMiB	12%, 32%, 28% of RAM	LOW RAM, DESKTOP SCOPE, IGPU GTT
watch.swapMaxMiB, watch.oomdHeadroomMinMiB	60%, 6% of swap	SWAP, and the headroom under which OOMD IMMINENT is said
watch.toolProcsMax, watch.tools	1000; kubectl, helm, tsh, gh, flux, devctl	LOAD over this many processes of these CLIs machine-wide; negative: off
desktop.typingQuiet	30s	How long the person's input stays idle before a claude:// link switches the desktop's window; negative: links do not wait for it
watch.tmpMaxMiB, watch.diskMinMiB	45% of /tmp, 5% of /	TMPFS, LOW DISK
ollama.url, lemonade.url	unset: no model server	The host's model servers, watched and guarded under the model-server lease
outbound.phrases, outbound.paths, outbound.storeDeny	none	What never leaves the machine, the plan files whose writes are outbound, the refused secret-store writes (What leaves the machine)
secret.vault, secret.tokenFile	none	The shared 1Password vault beekeeper secret reads and writes, and the file with its service account's token (Secret operations)
scan.sops, scan.vaults, scan.minLength	none, none, 12	The SOPS file globs and 1Password vaults beekeeper scan index fingerprints, and the shortest value it takes (What reaches the model)
plans.repositories, plans.check	none, plan-stages	The plans repositories whose open pull requests a note for guide.person links only once their stage check is green
outbound.sweepRoots, outbound.sweepDepth	the home directory, 5	Where the watch looks for exposed keys and credentials in remote URLs

State lives in $XDG_STATE_HOME/beekeeper/ (state.json, which an older beekeeper still running writes back with the fields it does not know, events.jsonl, whose at is RFC 3339 in UTC while beekeeper log prints local times, each caller's last snapshot, the alert baseline alerts.json with its owner's alerts.lock, the notification ledger notify.json with notify.lock) and leases in leases/, one directory per held resource.

Development

See docs/development.md.

Documentation

Overview

beekeeper keeps the Claude Code sessions sharing one machine working together: it shows what every session does, watches the machine, reads the GitHub budget they share and holds the shared resources one session at a time.