bench

README

bench

Measuring tools for LLM gateways such as llmflow-gateway, in pure Go:

command	what it is
cmd/gwbench	interleaved A/B of gateways placed in front of one upstream: the latency each gateway adds, paired round by round against a direct call, refused when the machine is loaded
cmd/fakevllm	a recording fake vLLM: answers OpenAI chat completions (JSON or SSE) and the Anthropic Messages API (JSON or SSE), and writes every request it receives (method, path, headers, body) as one JSON line
e2e	end-to-end checks of llmflow-gateway in front of a real vLLM: fair-share priorities and preemption, prefix-cache isolation, Responses / Messages / tokenize / embeddings / rerank, accounting
e2e/oidc	end-to-end checks of llmflow-gateway's OpenID Connect paths against real identity providers, dex and go-authn/bridge (behind a test SAML IdP): JWT access tokens, refusals, key rotation, SSO with PKCE, cross-organisation isolation, SCIM
e2e/anthropic	end-to-end checks of llmflow-gateway's opt-in Anthropic upstream: per-organisation keys, egress masking, USD accounting, retry-after; against the fake API, or the real one with a key file
fakeupstream	the fake vLLM as a Go package, for tests that embed it with httptest; also mimics Anthropic's API (429/529, retry-after, prompt-cache usage, workspace and rate-limit headers)

go install github.com/go-llmflow/bench/cmd/gwbench@latest
go install github.com/go-llmflow/bench/cmd/fakevllm@latest

gwbench: the protocol

The question is "how much latency does a gateway add?", not "how fast is the model". The upstream must therefore answer as fast as possible (fakevllm), and the number reported is a difference, not a latency.

1. One upstream, several paths. direct calls the upstream itself; every other target (--litellm, --llmflow, --target NAME|URL|KEYFILE, repeatable) is a gateway forwarding to that same upstream.
2. Interleaving. Each round sends one request to every target, one at a time, in a fresh random order (--seed). Drift of the machine (thermal state, a background job, the cache) spreads evenly over all targets instead of penalising whichever runs last. --warmup rounds are discarded.
3. Pairing. A gateway's overhead in round r is its latency minus the direct latency of the same round. Percentiles are taken over these paired differences, which cancels what both paths share (client, loopback, upstream).
4. Load gating. Ratios measured on a busy machine are meaningless. A run starts only when the 1-minute load average is at most --max-load (default 4; --wait waits for it, otherwise it refuses at once), and a run whose load ends above it is discarded, not averaged. --runs kept runs are collected; rounds stay paired when they are merged.
5. The control. TestPlantedOverheadIsMeasured puts a proxy that sleeps a known 3 ms and a transparent proxy in front of a test upstream: the instrument must report about 3 ms for the first, about 0 for the second, and separate the two. If it could not see a planted delay, its verdict on real gateways would mean nothing.

Requests are POST chat completions with max_tokens: 1, one user message (ping, or the content of --prompt-file, sent as a JSON string). An HTTP status other than 200 aborts the run: an error is never timed as a success.

Keys

Keys are read from files, never from the command line or the environment. KEYFILE may be empty for an open endpoint. gwbench llmflow-key creates an llmflow virtual key through the admin API (--master-key-file) and writes it to a mode 0600 file. Keep key files outside the repository.

Example

fakevllm --addr 127.0.0.1:18000 --out /tmp/requests.jsonl &
llmflow-gateway serve --config llmflow.hcl &      # forwards to 127.0.0.1:18000
gwbench llmflow-key --admin http://127.0.0.1:18080 --master-key-file ~/keys/master --out ~/keys/llmflow
gwbench run --direct http://127.0.0.1:18000/v1/chat/completions \
  --target 'v0.8.0|http://127.0.0.1:18080/v1/chat/completions|'"$HOME"'/keys/llmflow' \
  --rounds 2000 --warmup 200 --runs 8 --wait 2h --max-load 4

Result format

run 7 kept: load 3.50 -> 3.70            # or: run N discarded: load a -> b
kept runs=8, rounds per run=2000, warm-up=200
run 0 overhead p50: v0.1.0=96.125µs v0.6.0=109.999µs
...
target          p50        p90        p99          # raw latencies, all kept runs
direct     81.833µs   93.041µs  138.458µs
v0.6.0    193.875µs  212.292µs  351.834µs
overhead vs direct, paired per round (all kept runs):
v0.6.0    111.042µs  129.541µs  261.624µs          # the answer

The per-run p50 lines show whether runs agree; the last table is the result. Report it with the load range of the kept runs, the machine, and the GOMAXPROCS of each gateway.

fakevllm

fakevllm --addr 127.0.0.1:18000 --out requests.jsonl --model fake --reply "ok"

route	answer
GET /v1/models	one model, --model
POST /v1/messages	an Anthropic message; with "stream": true the event sequence message_start, content_block_start, content_block_delta…, content_block_stop, message_delta (with usage.output_tokens), message_stop
POST /v1/messages/count_tokens	{"input_tokens": N}, where N is the number of words in the prompt (system included), as Anthropic and vLLM answer it; it carries the same workspace headers and --status as /v1/messages (since v0.4.1)
any other POST	an OpenAI chat.completion; with "stream": true, chat.completion.chunk events (role, one chunk per word of --reply, finish), the usage chunk with empty choices when stream_options.include_usage is set, then data: [DONE]

Usage is predictable: one prompt token per whitespace-separated word of the request's message and system strings, one completion token per word of --reply. --delay and --token-delay slow the answer and the stream.

Every request is appended to --out (mode 0600) as {"method","path","headers","body"}; a body that is not JSON is recorded as a string. The recording holds the headers as received, Authorization included: that is what a witness is for. Use test keys only. If the record cannot be written the request gets a 500, so a test never reads a silent gap as "nothing was forwarded". Bodies are capped by --max-body (1 MiB, 413 above).

References for the answer shapes: the Anthropic streaming messages event sequence, and vLLM's own OpenAI-compatible server (the usage chunk with empty choices, data: [DONE]).

Anthropic API mode (since v0.4.0)

To test a gateway in front of Anthropic's API without a key, fakevllm reproduces the behaviour a gateway must handle there (references opened 2026-10-26: platform.claude.com/docs api/errors, api/rate-limits, build-with-claude/prompt-caching):

flag	effect
--status 429 / 529 / …	every POST answers this status with an Anthropic error body (rate_limit_error, overloaded_error, api_error); GET /v1/models still answers
--retry-after 30	the retry-after header of those answers
--cache-read N, --cache-write-5m N, --cache-write-1h N	prompt-cache usage on /v1/messages: cache_read_input_tokens, cache_creation_input_tokens and its split cache_creation.ephemeral_5m/1h_input_tokens. input_tokens stays the uncached prompt
--workspace ID / per-key	anthropic-workspace-id on /v1/messages answers; per-key derives one workspace per x-api-key, as Anthropic resolves a key to its workspace
--ratelimit-headers	anthropic-ratelimit-* headers, so a test can check a gateway does not pass them on

Streams now carry Anthropic's ping event after message_start. In Go, fakeupstream.Server.SetStatus switches the status while serving.

e2e/anthropic: llmflow-gateway in front of Anthropic

e2e/anthropic runs the llmflow-gateway binary (BENCH_GATEWAY_BIN, v0.12.0 or later) with an Anthropic model for two organisations, each with its own key. The fake API is fakeupstream in Anthropic mode. The test checks:

• the provider receives the organisation's key, never the client's credential or the OAuth beta;
• PII is masked and cache_salt and priority are gone before egress;
• streams go through, and /v1/chat/completions is refused;
• the spend report is in USD and equals the price list applied to the provider's usage (reads, 5-minute and 1-hour writes, output);
• a 429 with retry-after makes the gateway answer 429 itself, without calling the provider, for that organisation only, until the wait is over.

TestGatewayInFrontOfRealAnthropic repeats a minimal exchange against https://api.anthropic.com when BENCH_ANTHROPIC_KEY_FILE names a file holding an API key (BENCH_ANTHROPIC_MODEL, default claude-haiku-5-5). The variable names a file: a key never goes in the environment or a command line. It is skipped otherwise; it was not run for v0.4.0, since no key was available.

BENCH_GATEWAY_BIN=$(go env GOPATH)/bin/llmflow-gateway go test -v ./e2e/anthropic

On 2026-10-26, with llmflow-gateway v0.12.0, the fake-API test passes.

e2e: llmflow-gateway against a real vLLM

The gateway's design rests on vLLM behaviours read in vLLM's docs and source. e2e/ checks them live: it starts llmflow-gateway with freshly generated keys (nothing secret is read from the environment), creates one virtual key per team, and drives it in front of a running vLLM. Without BENCH_VLLM_URL every test skips, so CI runs none of them.

variable	meaning
BENCH_VLLM_URL	the chat vLLM, e.g. http://127.0.0.1:8000 (required)
BENCH_VLLM_MODEL	its model name (default: the first of /v1/models)
BENCH_GATEWAY_BIN	the llmflow-gateway binary (default: from PATH)
BENCH_VLLM_MAX_NUM_SEQS	the server's --max-num-seqs (the scenarios need 2)
BENCH_VLLM_KV_SHORTAGE=1	vLLM runs with a tiny KV cache: enables the preemption checks
BENCH_VLLM_EMBED_URL, BENCH_VLLM_RERANK_URL	optional embedding and score-model servers

Gateway configuration used by every test: organisation A (teams a1, a2) with share 0.5 and B (b1) with share 0.25 on a pool of capacity 2, so by Hamilton apportionment A reserves 1 slot and B none: every request of B borrows, the first request of A is within its share. cache_isolation = "org".

How vLLM was run (2026-10-26)

vLLM 0.32.1rc1.dev505+g00b6c4c56 (vllm/vllm-openai-cpu:nightly-arm64) in Docker on an Apple M-series Mac (arm64 Linux VM, 8 GiB), model Qwen/Qwen2.5-0.5B-Instruct in bfloat16; BAAI/bge-small-en-v1.5 (embeddings) and BAAI/bge-reranker-base (rerank). The released v0.32.0-arm64 CPU image fails every generation on this machine (compute_slot_mapping: "Boolean value of Tensor with more than one value is ambiguous"), which is why the nightly is used. llmflow-gateway v0.8.0.

# checks a-e except preemption
docker run -d -p 127.0.0.1:8000:8000 -e VLLM_CPU_KVCACHE_SPACE=1 \
  -e VLLM_CPU_OMP_THREADS_BIND=0-7 -e VLLM_ENABLE_RESPONSES_API_STORE=1 \
  vllm/vllm-openai-cpu:nightly-arm64 --model Qwen/Qwen2.5-0.5B-Instruct \
  --dtype bfloat16 --max-model-len 4096 --max-num-seqs 2 \
  --scheduling-policy priority --enable-prefix-caching
BENCH_VLLM_URL=http://127.0.0.1:8000 go test -v -timeout 60m ./e2e

# preemption: a 640-token KV cache
docker run ... --max-model-len 512 --max-num-seqs 2 --scheduling-policy priority \
  --enable-prefix-caching --kv-cache-memory-bytes 8M
BENCH_VLLM_URL=http://127.0.0.1:8000 BENCH_VLLM_KV_SHORTAGE=1 go test -v -run Preempt ./e2e

VLLM_ENABLE_RESPONSES_API_STORE=1 is needed for the Responses control: without it vLLM stores no response at all, whatever store says.

Results (2026-10-26, gateway v0.8.0)

Every ordering check has a control straight to vLLM that must come out the other way; the cache checks read vLLM's own counters (vllm:prefix_cache_hits_total, vllm:prefix_cache_queries_total), never timing.

check	test	result	evidence
control: FCFS at equal priority	TestControlFCFSWithoutPriorities	pass	direct, all priority 0: B3 (sent first) first token 4.7 s before A1
vLLM: X-Vllm-Priority overrides the body	TestVLLMHeaderOverridesBodyPriority	pass	body 100 + header −100: B3 before A1; body 100 alone: A1 before B3
(a) within-share before borrowers	TestWithinShareBeforeBorrowers	pass	through the gateway A1 (sent after B3) got its first token 5.2 s before the borrower B3
(a) control: victim is the latest arrival	TestControlPreemptsLatestArrival	pass	KV 640 tokens, 2 × 384 generated; direct: A1 (later) stalled 1 m 35 s, B1 finished first
(a) borrower preempted first	TestBorrowerPreemptedFirst	pass	through the gateway: the borrower B1 (started first) stalled 1 m 22 s, A1's longest gap 1.06 s, A1 finished first
(b) client priority ignored	TestClientCannotRaiseItsPriority	pass	B3 sent body priority, vllm_xargs, extra_body, X-Vllm-Priority: -100: A1 still first
(b)+(c) prefix cache	TestPrefixCacheIsolation	pass	control direct, unsalted repeat: 768/812 hit; a1 on that unsalted prompt: 0/812; a2 after a1 (same org): 768/814; b1 after a1: 0/814; b1 with a1's client cache_salt: 0/814; a2 with another client salt: 768/814
(d) Responses, stateless	TestResponsesStatelessThroughGateway	pass	gateway response (store: true asked) is 404 at vLLM's GET /v1/responses/{id}; control: a direct store: true response is readable
(d) Messages	TestMessagesThroughGateway	pass	JSON type=message, SSE message_start … message_stop
(d) /tokenize	TestTokenizeThroughGateway	pass	count 6 through the gateway, 6 from vLLM
(d) embeddings	TestEmbeddingsThroughGateway	pass	2 vectors of 384
(d) rerank v1 and v2	TestRerankThroughGateway	pass	Paris ranked first (0.998), prompt_tokens 34
(e) accounting	TestAccountingMatchesVLLM	pass	chat JSON + chat stream (no client usage) + Messages + Responses: vLLM counted 132 prompt / 44 generated, the gateway charged 132 / 44
vLLM beyond --max-num-seqs	TestVLLMQueuesInsteadOfRefusing	pass	6 concurrent requests with 2 slots: six 200, no 429 or 503
fallback on saturation (gateway v0.11.0, #58)	TestFallbackOnSaturation	pass	two borrowing streams of b1 fill pool cpu (C = 2); the next b1 request is served by chat-spare (X-Llmflow-Model), a1's within-share request stays on chat; llmflow_fallbacks_total{reason="saturated"} = 1. Run on 2026-10-26 with --max-num-seqs 4 (both pools on one vLLM), gateway built from go-llmflow/gateway#66

Hard budgets: usage ≤ W (gateway v0.17.0, #87)

TestHardBudgetUsageWithinW sends requests through a gateway whose team has a budget. For each one, vLLM's usage must stay within the worst case W the gateway held: W = prompts · max((L−M)·p_in + n·M·p_out, L·p_in), with L vLLM's max_model_len (its /v1/models) and M the max_tokens sent (the client's, or the gateway's in X-Llmflow-Max-Tokens). The test checks the tokens (prompt ≤ prompts·L, completion ≤ prompts·n·M) and the cost. It also checks that the ledger never passes the limit, and that a budget below the smallest W refuses with 429 before vLLM sees anything.

Run on 2026-10-28 with vLLM 0.32.1rc1 nightly CPU, Qwen2.5-0.5B-Instruct, --max-model-len 512 --max-num-seqs 2, and gateway v0.17.0:

docker run -d --shm-size=1g -p 127.0.0.1:8000:8000 -e VLLM_CPU_KVCACHE_SPACE=1 \
  vllm/vllm-openai-cpu:nightly-arm64 --model Qwen/Qwen2.5-0.5B-Instruct \
  --dtype bfloat16 --max-model-len 512 --max-num-seqs 2
BENCH_VLLM_URL=http://127.0.0.1:8000 go test -v -run TestHardBudgetUsageWithinW ./e2e

(Without --shm-size, the nightly fails at start: "Insufficient space in /dev/shm".)

request	M sent	usage (prompt / completion)	cost ≤ W
chat, no max_tokens	512 (picked)	35 / 149	0.780 ≤ 2.560
chat, n = 3	16	34 / 42	0.244 ≤ 0.736
chat, streamed	32	34 / 32	0.194 ≤ 0.640
chat, prompt 488 tokens of 512	64	488 / 10	0.538 ≤ 0.768
same, no max_tokens	512 (picked)	488 / 24	0.608 ≤ 2.560
completions, 2 prompts, n = 2	8	9 / 32	0.169 ≤ 1.168

The test prices are 1000 / 5000 / 100 per million tokens (input / output / cached). On a prompt near L, vLLM cut the output at L − input as get_max_tokens says, which is why W counts L − M input tokens beside M output tokens.

TestFallbackOnSaturation needs BENCH_VLLM_MAX_NUM_SEQS=4 (a vLLM started with --max-num-seqs 4) and a gateway of v0.11.0 or later; it skips otherwise.

Not covered: audio transcription (no Whisper model run on CPU), throughput (deliberately not measured here).

e2e/oidc: llmflow-gateway against real identity providers

The gateway's JWT path (go-authn/oidc), SSO (go-authn/rp) and SCIM had met only test keys. e2e/oidc runs the same checks against two real providers. Each test starts its provider, a counting proxy in front of it (the proxy's URL is the issuer, so every key-set fetch the gateway makes is counted), the fake upstream and the gateway, all with generated secrets.

variable	provider
BENCH_DEX_IMAGE	dex, as a container, e.g. ghcr.io/dexidp/dex:v2.46.1: static clients, static passwords with groups, the password grant for API tokens, keysRotationPeriod 4 min. Two dex instances share the issuer string but not the keys.
BENCH_BRIDGE_BIN	go-authn/bridge (authn-bridge) in front of a test SAML federation and IdP from go-authn/saml/samltest (v0.5.0, pure Go). The metadata and the Responses are signed, and the assertions encrypted to the bridge. People log in through the IdP's form; eppn becomes preferred_username and eduPersonEntitlement becomes groups. API tokens come from the authorization-code flow with PKCE. Key rotation follows the bridge README's procedure, with a restart at each step: the next key is published first in retired_signing_key_files (the JWKS lists both kids, tokens keep the old one), then it signs and the old key stays published.
BENCH_GATEWAY_BIN	llmflow-gateway (default: from PATH)

Gateway configuration: organisations inst-alpha (team lab-alpha) and inst-beta (team lab-beta). jwt maps group grp-alpha to lab-alpha and grp-beta to lab-beta, with clock_skew 5 s and min_refresh 20 s. sso binds admins-alpha to org_admin on inst-alpha. scim binds group Beta Leads to team_admin on lab-beta. The people are alice (grp-alpha, admins-alpha), bob (grp-beta) and carol (no group).

The upstream is the fake one (fakeupstream). The browser is a Go HTTP client that follows redirects and submits the provider's forms. It keeps the gateway's __Host- cookies on http://127.0.0.1, as browsers do for a potentially trustworthy origin (W3C Secure Contexts §3.1).

go install github.com/go-authn/bridge/cmd/authn-bridge@v0.23.4
BENCH_DEX_IMAGE=ghcr.io/dexidp/dex:v2.46.1 BENCH_BRIDGE_BIN=$(go env GOPATH)/bin/authn-bridge \
  go test -v -timeout 20m ./e2e/oidc

Results (2026-10-26, llmflow-gateway v0.8.0)

dex v2.46.1 (ghcr.io/dexidp/dex; the fleet's claimward/dex is an unmodified fork 232 commits behind it). authn-bridge v0.23.4. The SAML side was signed by xmlsec1 1.3.12 in bench v0.3.0. From v0.3.1 it is go-authn/saml/samltest v0.5.0, whose own tests have xmlsec1 verify and decrypt its output. TestBridge passed again with it, two-step rotation included, on 2026-10-26.

check	dex	authn-bridge	evidence (both)
(a) token accepted, charged to the mapped org/team	pass	pass	alice → inst-alpha/lab-alpha, bob → inst-beta/lab-beta in llmflow_requests_total and /admin/spend
(b) wrong audience	pass	pass	401, the same body as a garbage bearer
(b) signed by another key, same issuer	pass	pass	401, same body
(b) alg: none, HS256 keyed with the public key (PEM, DER)	pass	pass	401, same body
(b) expired	pass	pass	401 after exp + 5 s skew
(b) unknown-kid flood	pass	pass	40 tokens after a quiet min_refresh: exactly 1 key-set fetch at the provider
(c) key rotation	pass	pass	old token (not expired) and new token both 200, 1 fetch; an SSO login right after the rotation works
(d) SSO code + PKCE S256 + state + nonce	pass	pass	__Host-llmflow-session Secure, HttpOnly, SameSite=Lax, Path=/; /admin/whoami shows org_admin on inst-alpha
(d) replayed callback, callback in another browser	pass	pass	400 both
(d) no role binding	pass	pass	bob: 403 "no administrative role for this account"
(d) logout	pass	pass	without CSRF token 403; with it 200; the old cookie then 401
(e) org_admin of A against org B	pass	pass	13 admin listings without inst-beta/lab-beta; 6 writes on B 403 (control: the same budget write on A is 200); 7 UI pages × 4 queries without B
(f) SCIM user + group → role	pass	pass	carol refused before; after SCIM team_admin on lab-beta in /admin/users/…/roles and in her session

Findings filed: go-llmflow/gateway#60 (SSO's key set refreshes at most once a minute, fixed, so a provider rotation right after start-up refuses logins: observed with dex rotating every 30 s), go-llmflow/gateway#61 (README says https only; http to a loopback issuer is accepted), go-authn/bridge#79 (no documented signing-key rotation procedure; the one tested here works).

e2e: HA mutual TLS between two replicas (since v0.6.0)

TestHAMutualTLSLive (e2e/ha_mtls_test.go) proves that two llmflow-gateway replicas really complete a mutual TLS 1.3 handshake on the HA internal port, with certificate files (multi-line PEM) loaded through the configuration: the path that v0.16.0 broke (every real PEM file was refused: "holds more than one line") and v0.16.1 fixed. It needs the gateway binary (BENCH_GATEWAY_BIN, v0.16.1 or later) and docker for a throw-away PostgreSQL (BENCH_PG_IMAGE, default postgres:18, trust authentication, a random loopback port, removed at the end). It needs no vLLM: the upstream is a fake with a gate. It skips, with the reason, when docker or the image is unavailable.

1. A CA and two replica certificates (SAN DNS:llmflow-ha; ECDSA for A, Ed25519 for B) are generated in Go and written as PEM files, keys mode 0600. check-config accepts them.
2. Replica A starts and takes the pool's lease; replica B starts.
3. Requests go through B, the non-owner: all are 200 at priority 0, llmflow_ha_unowned_total stays 0 on B, and while three requests are held at the fake upstream the owner's llmflow_inflight reads 3 (B's llmflow_ha_local_grants too): the grants crossed the mTLS channel.
4. Control. B restarts with a certificate another CA signed. It loads, but the owner does not answer: its requests are admitted without an owner (llmflow_ha_unowned_total 3, priority not 0). If this did not fail, step 3 would prove nothing about the handshake.

go install github.com/go-llmflow/gateway/cmd/llmflow-gateway@v0.16.1
BENCH_GATEWAY_BIN=$(go env GOPATH)/bin/llmflow-gateway go test -v -run TestHAMutualTLSLive ./e2e

Run on 2026-10-27 with llmflow-gateway v0.16.1 and PostgreSQL 18 (docker): pass in 7 s. With a v0.16.0 binary the same test fails at check-config (secret … holds more than one line), as it should.

Fake slurmrestd and e2e: Slurm discovery (since v0.5.0)

The package fakeupstream provides Slurmrestd, a fake slurmrestd.

• GET /slurm/<version>/jobs/ answers the jobs given to SetJobs, in the shape of OPENAPI_JOB_INFO_RESP.
• The job_state field is a flag array, for example ["RUNNING"] or ["RUNNING","COMPLETING"].
• A request must carry X-SLURM-USER-TOKEN set to Token.
• SetDown(true) simulates an outage: the server answers 502.

The fake tests the gateway's Slurm discovery (go-llmflow/gateway#75) without a cluster.

e2e/slurm_test.go (TestSlurmDiscoveryE2E) runs on a real Slurm node, as root. It does the following:

1. Starts the gateway with a slurm {} model.
2. Submits, with sbatch --uid, a job of user alice in account physics that claims the model. This job must never be trusted.
3. Submits a job of svc_llm named llmflow:llama:18100:3, then waits for the pool's C to reach 3.
4. Sends a chat request through the job.
5. Runs scancel on the job, then checks that C falls back to 0 and the model is no longer served.

Variable	Meaning
BENCH_SLURM_RESTD	slurmrestd, e.g. http://127.0.0.1:6820
BENCH_SLURM_API	data_parser version (default v0.0.42)
BENCH_SLURM_JWT_FILE	output of scontrol token username=svc_llm lifespan=7200
BENCH_SLURM_JOB	the job's command; {PORT} and {KEYFILE} (the vLLM key) are replaced
BENCH_SLURM_MODEL, BENCH_SLURM_MEM, BENCH_SLURM_WAIT	model id served, job memory, wait for admission

How Slurm was run (2026-10-26, arm64)

The setup is one Debian trixie container with Slurm 24.11.5:

• packages slurmctld, slurmd, slurmrestd, slurm-wlm-jwt-plugin and munge;
• AuthAltTypes=auth/jwt;
• slurmrestd -a rest_auth/jwt -s openapi/slurmctld, run as an unprivileged user. Its data_parser versions are v0.0.40 to v0.0.42.

The container runs with --privileged, because slurmrestd needs to unshare namespaces. For the vLLM run, /opt/uv and /opt/venv are copied from vllm/vllm-openai-cpu:nightly-arm64. The job serves Qwen/Qwen2.5-0.5B-Instruct and reads its key into VLLM_API_KEY, never through --api-key.

The files are in e2e/slurm-node/. Run them like this:

docker run -d --privileged --shm-size=2g --name slurm --hostname c1 \
  -v $PWD/out:/e2e -v ~/.cache/huggingface:/hf:ro llmflow-slurm-vllm
docker exec slurm sh -c 'scontrol token username=svc_llm lifespan=7200 > /e2e/jwt.env'
docker exec -e BENCH_SLURM_RESTD=http://127.0.0.1:6820 -e BENCH_SLURM_JWT_FILE=/e2e/jwt.env \
  -e BENCH_SLURM_MODEL=Qwen/Qwen2.5-0.5B-Instruct -e BENCH_SLURM_MEM=4500M -e BENCH_SLURM_WAIT=8m \
  -e 'BENCH_SLURM_JOB=/e2e/vllm-job.sh {PORT} {KEYFILE}' -e BENCH_GATEWAY_BIN=/e2e/llmflow-gateway \
  -w /tmp slurm /e2e/e2e.test -test.run TestSlurmDiscoveryE2E -test.v

Here e2e.test is GOOS=linux go test -c ./e2e, and the gateway and vllm-job.sh are copied into out/.

Results (2026-10-26, gateway #77 head, Slurm 24.11.5, data_parser v0.0.42)

Job	Result
fakevllm	admitted 2 s after sbatch, removed 2 s after scancel
vLLM CPU (Qwen2.5-0.5B, --enforce-eager)	admitted 18 s after sbatch (once /health and /v1/models answered), chat request 200, removed 2 s after scancel
alice/physics job claiming the model	rejected once (reason="account") and never contacted

Two earlier vLLM runs failed inside vLLM: once from too little /dev/shm, once because torch inductor found no C++ compiler. Each time the job kept RUNNING with /health down, and the gateway correctly never admitted it.

Development

Development

go vet ./... && go test -race ./...
go test -run '^$' -fuzz '^FuzzServe$' -fuzztime 30s ./fakeupstream

CI runs gofmt, vet, the race tests on Linux amd64/arm64 and macOS, a fuzz smoke, govulncheck, and a CGO_ENABLED=0 cross-build for Linux (amd64, arm64, riscv64, s390x, 386), macOS and Windows. The load gate reads /proc/loadavg on Linux and sysctl vm.loadavg on macOS; elsewhere it cannot read the load and refuses to measure.

License

See LICENSE.