carbon-relay-ng

module
v0.8.6 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Mar 23, 2017 License: BSD-2-Clause-Views

README

Circle CI Go Report Card GoDoc

carbon-relay-ng

A relay for carbon streams, in go. Like carbon-relay from the graphite project, except it:

  • performs better: should be able to do about 100k ~ 1M million metrics per second depending on configuration
  • you can adjust the routing table at runtime, in real time using the web or telnet interface (interfaces need more work)
  • has aggregator functionality built-in
  • supports a per-route spooling policy. (i.e. in case of an endpoint outage, we can temporarily queue the data up to disk and resume later)
  • you can choose between plaintext or pickle output, per route.
  • performs validation on all incoming metrics (see below)

This makes it easy to fanout to other tools that feed in on the metrics. Or balance/split load, or provide redundancy, or partition the data, etc. This pattern allows alerting and event processing systems to act on the data as it is received (which is much better than repeated reading from your storage)

screenshot

Limitations

  • regex rewriter rules do not support limiting number of replacements, max must be set to -1
  • the web UI is not always reliable to make changes. the config file and tcp interface are safer and more complete anyway.
  • internal metrics must be routed somewhere (e.g. into the relay itself) otherwise it'll leak memory. this is a silly bug but I haven't had time yet to fix it.

Releases & versions

see https://github.com/graphite-ng/carbon-relay-ng/releases

Instrumentation

grafana dashboard

Installation

You can install packages from the raintank packagecloud repository We automatically build packages for Ubuntu 14.04 (trusty), 16.04 (xenial), debian 8 (jessie), Centos6 and Centos7 when builds in CircleCI succeed. Instructions for enabling the repository

You can also just build a binary (see below) and run the binary with a config file like so:

carbon-relay-ng [-cpuprofile cpuprofile-file] config-file

Building

Requires Go 1.4 or higher. We use https://github.com/kardianos/govendor to manage vendoring 3rd party libraries

export GOPATH=/some/path/
export PATH="$PATH:$GOPATH/bin"
go get -d github.com/graphite-ng/carbon-relay-ng
go get github.com/jteeuwen/go-bindata/...
cd "$GOPATH/src/github.com/graphite-ng/carbon-relay-ng"
# optional: check out an older version: git checkout v0.5
make

Concepts

You have 1 master routing table. This table contains 0-N routes. Each route can contain 0-M destinations (tcp endpoints)

First: "matching": you can match metrics on one or more of: prefix, substring, or regex. All 3 default to "" (empty string, i.e. allow all). The conditions are AND-ed. Regexes are more resource intensive and hence should - and often can be - avoided.

  • All incoming matrics are validated and go into the table when valid.

  • The table will then check metrics against the blacklist and discard when appropriate.

  • Then metrics pass through the rewriters and are modified if applicable. Rewrite rules wrapped with forward slashes are interpreted as regular expressions.

  • The table sends the metric to:

    • the aggregators, who match the metrics against their rules, compute aggregations and feed results back into the table. see Aggregation section below for details.
    • any routes that matches
  • The route can have different behaviors, based on its type:

    • sendAllMatch: send all metrics to all the defined endpoints (possibly, and commonly only 1 endpoint).
    • sendFirstMatch: send the metrics to the first endpoint that matches it.
    • consistentHashing: the algorithm is the same as Carbon's consistent hashing.
    • round robin: the route is a RR pool (not implemented)

carbon-relay-ng (for now) focuses on staying up and not consuming much resources.

if connection is up but slow, we drop the data if connection is down and spooling enabled. we try to spool but if it's slow we drop the data if connection is down and spooling disabled -> drop the data

Input

As with the Python implementation of carbon-relay, metrics can be pushed to carbon-relay-ng via TCP (plain text or pickle) or by using an AMQP broker such as RabbitMQ. To send metrics via AMQP, create a topic exchange (named "metrics" in the example carbon-relay-ng.ini) and publish messages to it in the usual metric format: <metric path> <metric value> <metric timestamp>. An exclusive, ephemeral queue will automatically be created and bound to the exchange, which carbon-relay-ng will consume from.

Validation

All incoming metrics undergo some basic sanity checks before the metrics go into the routing table. We always check the following:

  • the value parses to an int or float
  • the timestamp is a unix timestamp

By default, we also apply the following checks to the metric name:

  • has 3 fields
  • the key has no characters beside a-z A-Z _ - . = (fairly strict but graphite causes problems with various other characters)
  • has no empty node (like field1.field2..field4)

However, for legacy metrics, the legacy_metric_validation configuration parameter can be used to loosen the metric name checks. This can be useful when needing to forward metrics whose names you do not control. The following are valid values for the legacy_metric_validation field:

  • strict -- All checks described above are in force. This is the default.
  • medium -- We validate that the metric name has only ASCII characters and no embedded NULLs.
  • none -- No metric name checks are performed.

If we detect the metric is in metrics2.0 format we also check proper formatting, and unit and mtype are set.

Invalid metrics are dropped and can be seen at /badMetrics/timespec.json where timespec is something like 30s, 10m, 24h, etc. (the counters are also exported. See instrumentation section)

You can also validate that for each series, each point is older than the previous. using the validate_order option. This is helpful for some backends like grafana.net

Rewriting

Series names can be rewritten as they pass through the system by Rewriter rules, which are processed in series.

Basic rules use simple old/new text replacement, and support a Max parameter to specify the maximum number of matched items to be replaced.

Rewriter rules also support regexp syntax, which is enabled by wrapping the "old" parameter with forward slashes and setting "max" to -1.

Regexp rules support golang's standard regular expression syntax, and the "new" value can include submatch identifiers in the format ${1}.

Examples:

# basic rewriter rule to replace first occurrence of "foo" with "bar"
addRewriter foo bar 1

# regexp rewriter rule to add a prefix of "prefix." to all series
addRewriter /^/ prefix. -1

# regexp rewriter rule to replace "server.X" with "servers.X.collectd"
addRewriter /server\.([^.]+)/ servers.${1}.collectd -1

Aggregation

As discussed in concepts above, we can combine, at each point in time, the points of multiple series into a new series. Note:

  • The interval parameter let's you quantize ("fix") timestamps, for example with an interval of 60 seconds, if you have incoming metrics for times that differ from each other, but all fall within the same minute, they will be counted together.
  • The wait parameter allows up to the specified amount of seconds to wait for values, With a wait of 120, metrics can come 2 minutes late and still be included in the aggregation results.
  • The fmt parameter dictates what the metric key of the aggregated metric will be. use $1, $2, etc to refer to groups in the regex
  • Note that we direct incoming values to an aggregation bucket based on the interval the timestamp is in, and the output key it generates. This means that you can have 3 aggregation cases, based on how you set your regex, interval and fmt string.
    • aggregation of points with different metric keys, but with the same, or similar timestamps) into one outgoing value (~ carbon-aggregator). if you set the interval to the period between each incoming packet of a given key, and the fmt yields the same key for different input metric keys
    • aggregation of individual metrics, i.e. packets for the same key, with different timestamps. For example if you receive values for the same key every second, you can aggregate into minutely buckets by setting interval to 60, and have the fmt yield a unique key for every input metric key. (~ graphite rollups)
    • the combination: compute aggregates from values seen with different keys, and at multiple points in time.
  • functions currently available: avg, sum, min, max
  • aggregation output is routed via the routing table just like all other metrics. Note that aggregation output will never go back into aggregators (to prevent loops) and also bypasses the validation and blacklist.
  • see the included ini for examples

Configuration

Look at the included carbon-relay-ng.ini, it should be self describing. In the init option you can create routes, populate the blacklist, etc using the same command as the telnet interface, detailed below. This mechanism is choosen so we can reuse the code, instead of doing much configuration boilerplate code which would have to execute on a declarative specification. We can just use the same imperative commands since we just set up the initial state here.

TCP interface

commands:

help                                         show this menu
view                                         view full current routing table

addBlack <prefix|sub|regex> <substring>      blacklist (drops matching metrics as soon as they are received)

addRewriter <old> <new> <max>                add rewriter that will rewrite all old to new, max times
                                             use /old/ to specify a regular expression match, with support for ${1} style identifiers in new

addAgg <func> <regex> <fmt> <interval> <wait>  add a new aggregation rule.
         <func>:                             aggregation function to use
           sum
           avg
         <regex>                             regex to match incoming metrics. supports groups (numbered, see fmt)
         <fmt>                               format of output metric. you can use $1, $2, etc to refer to numbered groups
         <interval>                          align odd timestamps of metrics into buckets by this interval in seconds.
         <wait>                              amount of seconds to wait for "late" metric messages before computing and flushing final result.


addRoute <type> <key> [opts]   <dest>  [<dest>[...]] add a new route. note 2 spaces to separate destinations
         <type>:
           sendAllMatch                      send metrics in the route to all destinations
           sendFirstMatch                    send metrics in the route to the first one that matches it
           consistentHashing                 distribute metrics between destinations using a hash algorithm
         <opts>:
           prefix=<str>                      only take in metrics that have this prefix
           sub=<str>                         only take in metrics that match this substring
           regex=<regex>                     only take in metrics that match this regex (expensive!)
         <dest>: <addr> <opts>
           <addr>                            a tcp endpoint. i.e. ip:port or hostname:port
                                             for consistentHashing routes, an instance identifier can also be present:
                                             hostname:port:instance
                                             The instance is used to disambiguate multiple endpoints on the same host, as the Carbon-compatible consistent hashing algorithm does not take the port into account.
           <opts>:
               prefix=<str>                  only take in metrics that have this prefix
               sub=<str>                     only take in metrics that match this substring
               regex=<regex>                 only take in metrics that match this regex (expensive!)
               flush=<int>                   flush interval in ms
               reconn=<int>                  reconnection interval in ms
               pickle={true,false}           pickle output format instead of the default text protocol
               spool={true,false}            enable spooling for this endpoint

addDest <routeKey> <dest>                    not implemented yet

modDest <routeKey> <dest> <opts>:            modify dest by updating one or more space separated option strings
               addr=<addr>                   new tcp address
               prefix=<str>                  new matcher prefix
               sub=<str>                     new matcher substring
               regex=<regex>                 new matcher regex

modRoute <routeKey> <opts>:                  modify route by updating one or more space separated option strings
               prefix=<str>                  new matcher prefix
               sub=<str>                     new matcher substring
               regex=<regex>                 new matcher regex

delRoute <routeKey>                          delete given route

Directories

Path Synopsis
cmd
carbon-relay-ng
carbon-relay-ng route traffic to anything that speaks the Graphite Carbon protocol (text or pickle) such as Graphite's carbon-cache.py, influxdb, ...
carbon-relay-ng route traffic to anything that speaks the Graphite Carbon protocol (text or pickle) such as Graphite's carbon-cache.py, influxdb, ...
like bufio.Writer (Copyright 2009 The Go Authors.
like bufio.Writer (Copyright 2009 The Go Authors.
ui
web

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL