config

Documentation

Index

• Constants
• func AddFlags(fs *flag.FlagSet, f *Flags)
• func DefaultRPCProtocol() (int, error)
• func FormatFrom(name string) string
• func UIPathBuilder(UIContentString string) string
• type ACL
• type Addresses
• type AdvertiseAddrsConfig
• type AutoEncrypt
• type Autopilot
• type Builder
  • func NewBuilder(flags Flags) (*Builder, error)
  • func (b *Builder) Build() (rt RuntimeConfig, err error)
  • func (b *Builder) BuildAndValidate() (RuntimeConfig, error)
  • func (_ *Builder) BuildEnterpriseRuntimeConfig(_ *Config) (EnterpriseRuntimeConfig, error)
  • func (b *Builder) ReadFile(path string) (Source, error)
  • func (b *Builder) ReadPath(path string) ([]Source, error)
  • func (b *Builder) Validate(rt RuntimeConfig) error
• type CheckDefinition
• type Config
  • func Merge(files ...Config) Config
  • func Parse(data string, format string) (c Config, keys []string, err error)
• type ConfigEntries
• type Connect
• type Consul
• type DNS
• type EnterpriseMeta
  • func (_ *EnterpriseMeta) ToStructs() structs.EnterpriseMeta
• type EnterpriseRuntimeConfig
• type ExposeConfig
• type ExposePath
• type Flags
• type GossipLANConfig
• type GossipWANConfig
• type HTTPConfig
• type Limits
• type MeshGatewayConfig
• type Performance
• type Ports
• type RuntimeConfig
  • func DefaultRuntimeConfig(hcl string) *RuntimeConfig
  • func (c *RuntimeConfig) APIConfig(includeClientCerts bool) (*api.Config, error)
  • func (c *RuntimeConfig) ClientAddress() (unixAddr, httpAddr, httpsAddr string)
  • func (c *RuntimeConfig) Sanitized() map[string]interface{}
  • func (c *RuntimeConfig) ToTLSUtilConfig() tlsutil.Config
• type RuntimeSOAConfig
• type SOA
• type Segment
• type ServiceAddress
• type ServiceConnect
• type ServiceDefinition
• type ServiceProviderToken
• type ServiceProxy
• type ServiceWeights
• type Source
  • func DefaultConsulSource() Source
  • func DefaultEnterpriseSource() Source
  • func DefaultSource() Source
  • func DefaultVersionSource() Source
  • func DevConsulSource() Source
  • func DevSource() Source
  • func NonUserSource() Source
  • func OverrideEnterpriseSource() Source
  • func VersionSource(rev, ver, verPre string) Source
• type Telemetry
• type Tokens
• type UnixSocket
• type Upstream

Constants

const (
	SerfLANKeyring = "serf/local.keyring"
	SerfWANKeyring = "serf/remote.keyring"
)

Functions

func AddFlags

func AddFlags(fs *flag.FlagSet, f *Flags)

AddFlags adds the command line flags for the agent.

func DefaultRPCProtocol

func DefaultRPCProtocol() (int, error)

func FormatFrom

func FormatFrom(name string) string

func UIPathBuilder

func UIPathBuilder(UIContentString string) string

UIPathBuilder checks to see if there was a path set If so, adds beginning and trailing slashes to UI path

Types

type ACL

type ACL struct {
	Enabled                *bool   `json:"enabled,omitempty" hcl:"enabled" mapstructure:"enabled"`
	TokenReplication       *bool   `json:"enable_token_replication,omitempty" hcl:"enable_token_replication" mapstructure:"enable_token_replication"`
	PolicyTTL              *string `json:"policy_ttl,omitempty" hcl:"policy_ttl" mapstructure:"policy_ttl"`
	RoleTTL                *string `json:"role_ttl,omitempty" hcl:"role_ttl" mapstructure:"role_ttl"`
	TokenTTL               *string `json:"token_ttl,omitempty" hcl:"token_ttl" mapstructure:"token_ttl"`
	DownPolicy             *string `json:"down_policy,omitempty" hcl:"down_policy" mapstructure:"down_policy"`
	DefaultPolicy          *string `json:"default_policy,omitempty" hcl:"default_policy" mapstructure:"default_policy"`
	EnableKeyListPolicy    *bool   `json:"enable_key_list_policy,omitempty" hcl:"enable_key_list_policy" mapstructure:"enable_key_list_policy"`
	Tokens                 Tokens  `json:"tokens,omitempty" hcl:"tokens" mapstructure:"tokens"`
	DisabledTTL            *string `json:"disabled_ttl,omitempty" hcl:"disabled_ttl" mapstructure:"disabled_ttl"`
	EnableTokenPersistence *bool   `json:"enable_token_persistence" hcl:"enable_token_persistence" mapstructure:"enable_token_persistence"`

	// Enterprise Only
	MSPDisableBootstrap *bool `json:"msp_disable_bootstrap" hcl:"msp_disable_bootstrap" mapstructure:"msp_disable_bootstrap"`
}

type Addresses

type Addresses struct {
	DNS   *string `json:"dns,omitempty" hcl:"dns" mapstructure:"dns"`
	HTTP  *string `json:"http,omitempty" hcl:"http" mapstructure:"http"`
	HTTPS *string `json:"https,omitempty" hcl:"https" mapstructure:"https"`
	GRPC  *string `json:"grpc,omitempty" hcl:"grpc" mapstructure:"grpc"`
}

type AdvertiseAddrsConfig

type AdvertiseAddrsConfig struct {
	RPC     *string `json:"rpc,omitempty" hcl:"rpc" mapstructure:"rpc"`
	SerfLAN *string `json:"serf_lan,omitempty" hcl:"serf_lan" mapstructure:"serf_lan"`
	SerfWAN *string `json:"serf_wan,omitempty" hcl:"serf_wan" mapstructure:"serf_wan"`
}

type AutoEncrypt

type AutoEncrypt struct {
	// TLS enables receiving certificates for clients from servers
	TLS *bool `json:"tls,omitempty" hcl:"tls" mapstructure:"tls"`

	// Additional DNS SAN entries that clients request for their certificates.
	DNSSAN []string `json:"dns_san,omitempty" hcl:"dns_san" mapstructure:"dns_san"`

	// Additional IP SAN entries that clients request for their certificates.
	IPSAN []string `json:"ip_san,omitempty" hcl:"ip_san" mapstructure:"ip_san"`

	// AllowTLS enables the RPC endpoint on the server to answer
	// AutoEncrypt.Sign requests.
	AllowTLS *bool `json:"allow_tls,omitempty" hcl:"allow_tls" mapstructure:"allow_tls"`
}

AutoEncrypt is the agent-global auto_encrypt configuration.

type Autopilot

type Autopilot struct {
	CleanupDeadServers      *bool   `json:"cleanup_dead_servers,omitempty" hcl:"cleanup_dead_servers" mapstructure:"cleanup_dead_servers"`
	LastContactThreshold    *string `json:"last_contact_threshold,omitempty" hcl:"last_contact_threshold" mapstructure:"last_contact_threshold"`
	MaxTrailingLogs         *int    `json:"max_trailing_logs,omitempty" hcl:"max_trailing_logs" mapstructure:"max_trailing_logs"`
	MinQuorum               *uint   `json:"min_quorum,omitempty" hcl:"min_quorum" mapstructure:"min_quorum"`
	ServerStabilizationTime *string `json:"server_stabilization_time,omitempty" hcl:"server_stabilization_time" mapstructure:"server_stabilization_time"`

	// Enterprise Only
	DisableUpgradeMigration *bool `json:"disable_upgrade_migration,omitempty" hcl:"disable_upgrade_migration" mapstructure:"disable_upgrade_migration"`
	// Enterprise Only
	RedundancyZoneTag *string `json:"redundancy_zone_tag,omitempty" hcl:"redundancy_zone_tag" mapstructure:"redundancy_zone_tag"`
	// Enterprise Only
	UpgradeVersionTag *string `json:"upgrade_version_tag,omitempty" hcl:"upgrade_version_tag" mapstructure:"upgrade_version_tag"`
}

type Builder

type Builder struct {
	// Flags contains the parsed command line arguments.
	Flags Flags

	// Head, Sources, and Tail are used to manage the order of the
	// config sources, as described in the comments above.
	Head    []Source
	Sources []Source
	Tail    []Source

	// Warnings contains the warnings encountered when
	// parsing the configuration.
	Warnings []string

	// Hostname returns the hostname of the machine. If nil, os.Hostname
	// is called.
	Hostname func() (string, error)

	// GetPrivateIPv4 and GetPublicIPv6 return suitable default addresses
	// for cases when the user doesn't supply them.
	GetPrivateIPv4 func() ([]*net.IPAddr, error)
	GetPublicIPv6  func() ([]*net.IPAddr, error)
	// contains filtered or unexported fields
}

Builder constructs a valid runtime configuration from multiple configuration sources.

To build the runtime configuration first call Build() which merges the sources in a pre-defined order, converts the data types and structures into their final form and performs the syntactic validation.

The sources are merged in the following order:

• default configuration
• config files in alphabetical order
• command line arguments

The config sources are merged sequentially and later values overwrite previously set values. Slice values are merged by concatenating the two slices. Map values are merged by over- laying the later maps on top of earlier ones.

Then call Validate() to perform the semantic validation to ensure that the configuration is ready to be used.

Splitting the construction into two phases greatly simplifies testing since not all pre-conditions have to be satisfied when performing syntactical tests.

func NewBuilder

func NewBuilder(flags Flags) (*Builder, error)

NewBuilder returns a new configuration builder based on the given command line flags.

func (*Builder) Build

func (b *Builder) Build() (rt RuntimeConfig, err error)

Build constructs the runtime configuration from the config sources and the command line flags. The config sources are processed in the order they were added with the flags being processed last to give precedence over the other sources. If the error is nil then warnings can still contain deprecation or format warnings that should be presented to the user.

func (*Builder) BuildAndValidate

func (b *Builder) BuildAndValidate() (RuntimeConfig, error)

func (*Builder) BuildEnterpriseRuntimeConfig

func (_ *Builder) BuildEnterpriseRuntimeConfig(_ *Config) (EnterpriseRuntimeConfig, error)

func (*Builder) ReadFile

func (b *Builder) ReadFile(path string) (Source, error)

ReadFile parses a JSON or HCL config file and appends it to the list of config sources.

func (*Builder) ReadPath

func (b *Builder) ReadPath(path string) ([]Source, error)

ReadPath reads a single config file or all files in a directory (but not its sub-directories) and appends them to the list of config sources.

func (*Builder) Validate

func (b *Builder) Validate(rt RuntimeConfig) error

Validate performs semantical validation of the runtime configuration.

type CheckDefinition

type CheckDefinition struct {
	ID                             *string             `json:"id,omitempty" hcl:"id" mapstructure:"id"`
	Name                           *string             `json:"name,omitempty" hcl:"name" mapstructure:"name"`
	Notes                          *string             `json:"notes,omitempty" hcl:"notes" mapstructure:"notes"`
	ServiceID                      *string             `json:"service_id,omitempty" hcl:"service_id" mapstructure:"service_id"`
	Token                          *string             `json:"token,omitempty" hcl:"token" mapstructure:"token"`
	Status                         *string             `json:"status,omitempty" hcl:"status" mapstructure:"status"`
	ScriptArgs                     []string            `json:"args,omitempty" hcl:"args" mapstructure:"args"`
	HTTP                           *string             `json:"http,omitempty" hcl:"http" mapstructure:"http"`
	Header                         map[string][]string `json:"header,omitempty" hcl:"header" mapstructure:"header"`
	Method                         *string             `json:"method,omitempty" hcl:"method" mapstructure:"method"`
	Body                           *string             `json:"body,omitempty" hcl:"body" mapstructure:"body"`
	OutputMaxSize                  *int                `json:"output_max_size,omitempty" hcl:"output_max_size" mapstructure:"output_max_size"`
	TCP                            *string             `json:"tcp,omitempty" hcl:"tcp" mapstructure:"tcp"`
	Interval                       *string             `json:"interval,omitempty" hcl:"interval" mapstructure:"interval"`
	DockerContainerID              *string             `json:"docker_container_id,omitempty" hcl:"docker_container_id" mapstructure:"docker_container_id"`
	Shell                          *string             `json:"shell,omitempty" hcl:"shell" mapstructure:"shell"`
	GRPC                           *string             `json:"grpc,omitempty" hcl:"grpc" mapstructure:"grpc"`
	GRPCUseTLS                     *bool               `json:"grpc_use_tls,omitempty" hcl:"grpc_use_tls" mapstructure:"grpc_use_tls"`
	TLSSkipVerify                  *bool               `json:"tls_skip_verify,omitempty" hcl:"tls_skip_verify" mapstructure:"tls_skip_verify"`
	AliasNode                      *string             `json:"alias_node,omitempty" hcl:"alias_node" mapstructure:"alias_node"`
	AliasService                   *string             `json:"alias_service,omitempty" hcl:"alias_service" mapstructure:"alias_service"`
	Timeout                        *string             `json:"timeout,omitempty" hcl:"timeout" mapstructure:"timeout"`
	TTL                            *string             `json:"ttl,omitempty" hcl:"ttl" mapstructure:"ttl"`
	SuccessBeforePassing           *int                `json:"success_before_passing,omitempty" hcl:"success_before_passing" mapstructure:"success_before_passing"`
	FailuresBeforeCritical         *int                `json:"failures_before_critical,omitempty" hcl:"failures_before_critical" mapstructure:"failures_before_critical"`
	DeregisterCriticalServiceAfter *string             `` /* 139-byte string literal not displayed */

	EnterpriseMeta `hcl:",squash" mapstructure:",squash"`
}

type Config

type Config struct {
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl.tokens" stanza
	ACLAgentMasterToken *string `json:"acl_agent_master_token,omitempty" hcl:"acl_agent_master_token" mapstructure:"acl_agent_master_token"`
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl.tokens" stanza
	ACLAgentToken *string `json:"acl_agent_token,omitempty" hcl:"acl_agent_token" mapstructure:"acl_agent_token"`
	// DEPRECATED (ACL-Legacy-Compat) - moved to "primary_datacenter"
	ACLDatacenter *string `json:"acl_datacenter,omitempty" hcl:"acl_datacenter" mapstructure:"acl_datacenter"`
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl" stanza
	ACLDefaultPolicy *string `json:"acl_default_policy,omitempty" hcl:"acl_default_policy" mapstructure:"acl_default_policy"`
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl" stanza
	ACLDownPolicy *string `json:"acl_down_policy,omitempty" hcl:"acl_down_policy" mapstructure:"acl_down_policy"`
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl" stanza
	ACLEnableKeyListPolicy *bool `json:"acl_enable_key_list_policy,omitempty" hcl:"acl_enable_key_list_policy" mapstructure:"acl_enable_key_list_policy"`
	// DEPRECATED (ACL-Legacy-Compat) -  pre-version8 enforcement is deprecated.
	ACLEnforceVersion8 *bool `json:"acl_enforce_version_8,omitempty" hcl:"acl_enforce_version_8" mapstructure:"acl_enforce_version_8"`
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl" stanza
	ACLMasterToken *string `json:"acl_master_token,omitempty" hcl:"acl_master_token" mapstructure:"acl_master_token"`
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl.tokens" stanza
	ACLReplicationToken *string `json:"acl_replication_token,omitempty" hcl:"acl_replication_token" mapstructure:"acl_replication_token"`
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl.tokens" stanza
	ACLTTL *string `json:"acl_ttl,omitempty" hcl:"acl_ttl" mapstructure:"acl_ttl"`
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl.tokens" stanza
	ACLToken                         *string                  `json:"acl_token,omitempty" hcl:"acl_token" mapstructure:"acl_token"`
	ACL                              ACL                      `json:"acl,omitempty" hcl:"acl" mapstructure:"acl"`
	Addresses                        Addresses                `json:"addresses,omitempty" hcl:"addresses" mapstructure:"addresses"`
	AdvertiseAddrLAN                 *string                  `json:"advertise_addr,omitempty" hcl:"advertise_addr" mapstructure:"advertise_addr"`
	AdvertiseAddrLANIPv4             *string                  `json:"advertise_addr_ipv4,omitempty" hcl:"advertise_addr_ipv4" mapstructure:"advertise_addr_ipv4"`
	AdvertiseAddrLANIPv6             *string                  `json:"advertise_addr_ipv6,omitempty" hcl:"advertise_addr_ipv6" mapstructure:"advertise_addr_ipv6"`
	AdvertiseAddrWAN                 *string                  `json:"advertise_addr_wan,omitempty" hcl:"advertise_addr_wan" mapstructure:"advertise_addr_wan"`
	AdvertiseAddrWANIPv4             *string                  `json:"advertise_addr_wan_ipv4,omitempty" hcl:"advertise_addr_wan_ipv4" mapstructure:"advertise_addr_wan_ipv4"`
	AdvertiseAddrWANIPv6             *string                  `json:"advertise_addr_wan_ipv6,omitempty" hcl:"advertise_addr_wan_ipv6" mapstructure:"advertise_addr_ipv6"`
	Autopilot                        Autopilot                `json:"autopilot,omitempty" hcl:"autopilot" mapstructure:"autopilot"`
	BindAddr                         *string                  `json:"bind_addr,omitempty" hcl:"bind_addr" mapstructure:"bind_addr"`
	Bootstrap                        *bool                    `json:"bootstrap,omitempty" hcl:"bootstrap" mapstructure:"bootstrap"`
	BootstrapExpect                  *int                     `json:"bootstrap_expect,omitempty" hcl:"bootstrap_expect" mapstructure:"bootstrap_expect"`
	CAFile                           *string                  `json:"ca_file,omitempty" hcl:"ca_file" mapstructure:"ca_file"`
	CAPath                           *string                  `json:"ca_path,omitempty" hcl:"ca_path" mapstructure:"ca_path"`
	CertFile                         *string                  `json:"cert_file,omitempty" hcl:"cert_file" mapstructure:"cert_file"`
	Check                            *CheckDefinition         `json:"check,omitempty" hcl:"check" mapstructure:"check"` // needs to be a pointer to avoid partial merges
	CheckOutputMaxSize               *int                     `json:"check_output_max_size,omitempty" hcl:"check_output_max_size" mapstructure:"check_output_max_size"`
	CheckUpdateInterval              *string                  `json:"check_update_interval,omitempty" hcl:"check_update_interval" mapstructure:"check_update_interval"`
	Checks                           []CheckDefinition        `json:"checks,omitempty" hcl:"checks" mapstructure:"checks"`
	ClientAddr                       *string                  `json:"client_addr,omitempty" hcl:"client_addr" mapstructure:"client_addr"`
	ConfigEntries                    ConfigEntries            `json:"config_entries,omitempty" hcl:"config_entries" mapstructure:"config_entries"`
	AutoEncrypt                      AutoEncrypt              `json:"auto_encrypt,omitempty" hcl:"auto_encrypt" mapstructure:"auto_encrypt"`
	Connect                          Connect                  `json:"connect,omitempty" hcl:"connect" mapstructure:"connect"`
	DNS                              DNS                      `json:"dns_config,omitempty" hcl:"dns_config" mapstructure:"dns_config"`
	DNSDomain                        *string                  `json:"domain,omitempty" hcl:"domain" mapstructure:"domain"`
	DNSAltDomain                     *string                  `json:"alt_domain,omitempty" hcl:"alt_domain" mapstructure:"alt_domain"`
	DNSRecursors                     []string                 `json:"recursors,omitempty" hcl:"recursors" mapstructure:"recursors"`
	DataDir                          *string                  `json:"data_dir,omitempty" hcl:"data_dir" mapstructure:"data_dir"`
	Datacenter                       *string                  `json:"datacenter,omitempty" hcl:"datacenter" mapstructure:"datacenter"`
	DefaultQueryTime                 *string                  `json:"default_query_time,omitempty" hcl:"default_query_time" mapstructure:"default_query_time"`
	DisableAnonymousSignature        *bool                    `json:"disable_anonymous_signature,omitempty" hcl:"disable_anonymous_signature" mapstructure:"disable_anonymous_signature"`
	DisableCoordinates               *bool                    `json:"disable_coordinates,omitempty" hcl:"disable_coordinates" mapstructure:"disable_coordinates"`
	DisableHostNodeID                *bool                    `json:"disable_host_node_id,omitempty" hcl:"disable_host_node_id" mapstructure:"disable_host_node_id"`
	DisableHTTPUnprintableCharFilter *bool                    `` /* 148-byte string literal not displayed */
	DisableKeyringFile               *bool                    `json:"disable_keyring_file,omitempty" hcl:"disable_keyring_file" mapstructure:"disable_keyring_file"`
	DisableRemoteExec                *bool                    `json:"disable_remote_exec,omitempty" hcl:"disable_remote_exec" mapstructure:"disable_remote_exec"`
	DisableUpdateCheck               *bool                    `json:"disable_update_check,omitempty" hcl:"disable_update_check" mapstructure:"disable_update_check"`
	DiscardCheckOutput               *bool                    `json:"discard_check_output" hcl:"discard_check_output" mapstructure:"discard_check_output"`
	DiscoveryMaxStale                *string                  `json:"discovery_max_stale" hcl:"discovery_max_stale" mapstructure:"discovery_max_stale"`
	EnableACLReplication             *bool                    `json:"enable_acl_replication,omitempty" hcl:"enable_acl_replication" mapstructure:"enable_acl_replication"`
	EnableAgentTLSForChecks          *bool                    `json:"enable_agent_tls_for_checks,omitempty" hcl:"enable_agent_tls_for_checks" mapstructure:"enable_agent_tls_for_checks"`
	EnableCentralServiceConfig       *bool                    `` /* 127-byte string literal not displayed */
	EnableDebug                      *bool                    `json:"enable_debug,omitempty" hcl:"enable_debug" mapstructure:"enable_debug"`
	EnableScriptChecks               *bool                    `json:"enable_script_checks,omitempty" hcl:"enable_script_checks" mapstructure:"enable_script_checks"`
	EnableLocalScriptChecks          *bool                    `json:"enable_local_script_checks,omitempty" hcl:"enable_local_script_checks" mapstructure:"enable_local_script_checks"`
	EnableSyslog                     *bool                    `json:"enable_syslog,omitempty" hcl:"enable_syslog" mapstructure:"enable_syslog"`
	EncryptKey                       *string                  `json:"encrypt,omitempty" hcl:"encrypt" mapstructure:"encrypt"`
	EncryptVerifyIncoming            *bool                    `json:"encrypt_verify_incoming,omitempty" hcl:"encrypt_verify_incoming" mapstructure:"encrypt_verify_incoming"`
	EncryptVerifyOutgoing            *bool                    `json:"encrypt_verify_outgoing,omitempty" hcl:"encrypt_verify_outgoing" mapstructure:"encrypt_verify_outgoing"`
	GossipLAN                        GossipLANConfig          `json:"gossip_lan,omitempty" hcl:"gossip_lan" mapstructure:"gossip_lan"`
	GossipWAN                        GossipWANConfig          `json:"gossip_wan,omitempty" hcl:"gossip_wan" mapstructure:"gossip_wan"`
	HTTPConfig                       HTTPConfig               `json:"http_config,omitempty" hcl:"http_config" mapstructure:"http_config"`
	KeyFile                          *string                  `json:"key_file,omitempty" hcl:"key_file" mapstructure:"key_file"`
	LeaveOnTerm                      *bool                    `json:"leave_on_terminate,omitempty" hcl:"leave_on_terminate" mapstructure:"leave_on_terminate"`
	Limits                           Limits                   `json:"limits,omitempty" hcl:"limits" mapstructure:"limits"`
	LogLevel                         *string                  `json:"log_level,omitempty" hcl:"log_level" mapstructure:"log_level"`
	LogJSON                          *bool                    `json:"log_json,omitempty" hcl:"log_json" mapstructure:"log_json"`
	LogFile                          *string                  `json:"log_file,omitempty" hcl:"log_file" mapstructure:"log_file"`
	LogRotateDuration                *string                  `json:"log_rotate_duration,omitempty" hcl:"log_rotate_duration" mapstructure:"log_rotate_duration"`
	LogRotateBytes                   *int                     `json:"log_rotate_bytes,omitempty" hcl:"log_rotate_bytes" mapstructure:"log_rotate_bytes"`
	LogRotateMaxFiles                *int                     `json:"log_rotate_max_files,omitempty" hcl:"log_rotate_max_files" mapstructure:"log_rotate_max_files"`
	MaxQueryTime                     *string                  `json:"max_query_time,omitempty" hcl:"max_query_time" mapstructure:"max_query_time"`
	NodeID                           *string                  `json:"node_id,omitempty" hcl:"node_id" mapstructure:"node_id"`
	NodeMeta                         map[string]string        `json:"node_meta,omitempty" hcl:"node_meta" mapstructure:"node_meta"`
	NodeName                         *string                  `json:"node_name,omitempty" hcl:"node_name" mapstructure:"node_name"`
	Performance                      Performance              `json:"performance,omitempty" hcl:"performance" mapstructure:"performance"`
	PidFile                          *string                  `json:"pid_file,omitempty" hcl:"pid_file" mapstructure:"pid_file"`
	Ports                            Ports                    `json:"ports,omitempty" hcl:"ports" mapstructure:"ports"`
	PrimaryDatacenter                *string                  `json:"primary_datacenter,omitempty" hcl:"primary_datacenter" mapstructure:"primary_datacenter"`
	RPCProtocol                      *int                     `json:"protocol,omitempty" hcl:"protocol" mapstructure:"protocol"`
	RaftProtocol                     *int                     `json:"raft_protocol,omitempty" hcl:"raft_protocol" mapstructure:"raft_protocol"`
	RaftSnapshotThreshold            *int                     `json:"raft_snapshot_threshold,omitempty" hcl:"raft_snapshot_threshold" mapstructure:"raft_snapshot_threshold"`
	RaftSnapshotInterval             *string                  `json:"raft_snapshot_interval,omitempty" hcl:"raft_snapshot_interval" mapstructure:"raft_snapshot_interval"`
	RaftTrailingLogs                 *int                     `json:"raft_trailing_logs,omitempty" hcl:"raft_trailing_logs" mapstructure:"raft_trailing_logs"`
	ReconnectTimeoutLAN              *string                  `json:"reconnect_timeout,omitempty" hcl:"reconnect_timeout" mapstructure:"reconnect_timeout"`
	ReconnectTimeoutWAN              *string                  `json:"reconnect_timeout_wan,omitempty" hcl:"reconnect_timeout_wan" mapstructure:"reconnect_timeout_wan"`
	RejoinAfterLeave                 *bool                    `json:"rejoin_after_leave,omitempty" hcl:"rejoin_after_leave" mapstructure:"rejoin_after_leave"`
	RetryJoinIntervalLAN             *string                  `json:"retry_interval,omitempty" hcl:"retry_interval" mapstructure:"retry_interval"`
	RetryJoinIntervalWAN             *string                  `json:"retry_interval_wan,omitempty" hcl:"retry_interval_wan" mapstructure:"retry_interval_wan"`
	RetryJoinLAN                     []string                 `json:"retry_join,omitempty" hcl:"retry_join" mapstructure:"retry_join"`
	RetryJoinMaxAttemptsLAN          *int                     `json:"retry_max,omitempty" hcl:"retry_max" mapstructure:"retry_max"`
	RetryJoinMaxAttemptsWAN          *int                     `json:"retry_max_wan,omitempty" hcl:"retry_max_wan" mapstructure:"retry_max_wan"`
	RetryJoinWAN                     []string                 `json:"retry_join_wan,omitempty" hcl:"retry_join_wan" mapstructure:"retry_join_wan"`
	SerfBindAddrLAN                  *string                  `json:"serf_lan,omitempty" hcl:"serf_lan" mapstructure:"serf_lan"`
	SerfBindAddrWAN                  *string                  `json:"serf_wan,omitempty" hcl:"serf_wan" mapstructure:"serf_wan"`
	ServerMode                       *bool                    `json:"server,omitempty" hcl:"server" mapstructure:"server"`
	ServerName                       *string                  `json:"server_name,omitempty" hcl:"server_name" mapstructure:"server_name"`
	Service                          *ServiceDefinition       `json:"service,omitempty" hcl:"service" mapstructure:"service"`
	Services                         []ServiceDefinition      `json:"services,omitempty" hcl:"services" mapstructure:"services"`
	SessionTTLMin                    *string                  `json:"session_ttl_min,omitempty" hcl:"session_ttl_min" mapstructure:"session_ttl_min"`
	SkipLeaveOnInt                   *bool                    `json:"skip_leave_on_interrupt,omitempty" hcl:"skip_leave_on_interrupt" mapstructure:"skip_leave_on_interrupt"`
	StartJoinAddrsLAN                []string                 `json:"start_join,omitempty" hcl:"start_join" mapstructure:"start_join"`
	StartJoinAddrsWAN                []string                 `json:"start_join_wan,omitempty" hcl:"start_join_wan" mapstructure:"start_join_wan"`
	SyslogFacility                   *string                  `json:"syslog_facility,omitempty" hcl:"syslog_facility" mapstructure:"syslog_facility"`
	TLSCipherSuites                  *string                  `json:"tls_cipher_suites,omitempty" hcl:"tls_cipher_suites" mapstructure:"tls_cipher_suites"`
	TLSMinVersion                    *string                  `json:"tls_min_version,omitempty" hcl:"tls_min_version" mapstructure:"tls_min_version"`
	TLSPreferServerCipherSuites      *bool                    `` /* 133-byte string literal not displayed */
	TaggedAddresses                  map[string]string        `json:"tagged_addresses,omitempty" hcl:"tagged_addresses" mapstructure:"tagged_addresses"`
	Telemetry                        Telemetry                `json:"telemetry,omitempty" hcl:"telemetry" mapstructure:"telemetry"`
	TranslateWANAddrs                *bool                    `json:"translate_wan_addrs,omitempty" hcl:"translate_wan_addrs" mapstructure:"translate_wan_addrs"`
	UI                               *bool                    `json:"ui,omitempty" hcl:"ui" mapstructure:"ui"`
	UIContentPath                    *string                  `json:"ui_content_path,omitempty" hcl:"ui_content_path" mapstructure:"ui_content_path"`
	UIDir                            *string                  `json:"ui_dir,omitempty" hcl:"ui_dir" mapstructure:"ui_dir"`
	UnixSocket                       UnixSocket               `json:"unix_sockets,omitempty" hcl:"unix_sockets" mapstructure:"unix_sockets"`
	VerifyIncoming                   *bool                    `json:"verify_incoming,omitempty" hcl:"verify_incoming" mapstructure:"verify_incoming"`
	VerifyIncomingHTTPS              *bool                    `json:"verify_incoming_https,omitempty" hcl:"verify_incoming_https" mapstructure:"verify_incoming_https"`
	VerifyIncomingRPC                *bool                    `json:"verify_incoming_rpc,omitempty" hcl:"verify_incoming_rpc" mapstructure:"verify_incoming_rpc"`
	VerifyOutgoing                   *bool                    `json:"verify_outgoing,omitempty" hcl:"verify_outgoing" mapstructure:"verify_outgoing"`
	VerifyServerHostname             *bool                    `json:"verify_server_hostname,omitempty" hcl:"verify_server_hostname" mapstructure:"verify_server_hostname"`
	Watches                          []map[string]interface{} `json:"watches,omitempty" hcl:"watches" mapstructure:"watches"`

	// This isn't used by Consul but we've documented a feature where users
	// can deploy their snapshot agent configs alongside their Consul configs
	// so we have a placeholder here so it can be parsed but this doesn't
	// manifest itself in any way inside the runtime config.
	SnapshotAgent map[string]interface{} `json:"snapshot_agent,omitempty" hcl:"snapshot_agent" mapstructure:"snapshot_agent"`

	// non-user configurable values
	// DEPRECATED (ACL-Legacy-Compat) - moved into the "acl" stanza
	ACLDisabledTTL             *string  `json:"acl_disabled_ttl,omitempty" hcl:"acl_disabled_ttl" mapstructure:"acl_disabled_ttl"`
	AEInterval                 *string  `json:"ae_interval,omitempty" hcl:"ae_interval" mapstructure:"ae_interval"`
	CheckDeregisterIntervalMin *string  `` /* 127-byte string literal not displayed */
	CheckReapInterval          *string  `json:"check_reap_interval,omitempty" hcl:"check_reap_interval" mapstructure:"check_reap_interval"`
	Consul                     Consul   `json:"consul,omitempty" hcl:"consul" mapstructure:"consul"`
	Revision                   *string  `json:"revision,omitempty" hcl:"revision" mapstructure:"revision"`
	SegmentLimit               *int     `json:"segment_limit,omitempty" hcl:"segment_limit" mapstructure:"segment_limit"`
	SegmentNameLimit           *int     `json:"segment_name_limit,omitempty" hcl:"segment_name_limit" mapstructure:"segment_name_limit"`
	SyncCoordinateIntervalMin  *string  `json:"sync_coordinate_interval_min,omitempty" hcl:"sync_coordinate_interval_min" mapstructure:"sync_coordinate_interval_min"`
	SyncCoordinateRateTarget   *float64 `json:"sync_coordinate_rate_target,omitempty" hcl:"sync_coordinate_rate_target" mapstructure:"sync_coordinate_rate_target"`
	Version                    *string  `json:"version,omitempty" hcl:"version" mapstructure:"version"`
	VersionPrerelease          *string  `json:"version_prerelease,omitempty" hcl:"version_prerelease" mapstructure:"version_prerelease"`

	// Enterprise Only
	NonVotingServer *bool `json:"non_voting_server,omitempty" hcl:"non_voting_server" mapstructure:"non_voting_server"`
	// Enterprise Only
	SegmentName *string `json:"segment,omitempty" hcl:"segment" mapstructure:"segment"`
	// Enterprise Only
	Segments []Segment `json:"segments,omitempty" hcl:"segments" mapstructure:"segments"`
}

Config defines the format of a configuration file in either JSON or HCL format.

It must contain only pointer values, slices and maps to support standardized merging of multiple Config structs into one.

Since this is the format which users use to specify their configuration it should be treated as an external API which cannot be changed and refactored at will since this will break existing setups.

func Merge

func Merge(files ...Config) Config

Merge recursively combines a set of config file structures into a single structure according to the following rules:

* only values of type struct, slice, map and pointer to simple types are allowed. Other types panic. * when merging two structs the result is the recursive merge of all fields according to the rules below * when merging two slices the result is the second slice appended to the first * when merging two maps the result is the second map overlaid on the first * when merging two pointer values the result is the second value if it is not nil, otherwise the first

func Parse

func Parse(data string, format string) (c Config, keys []string, err error)

Parse parses a config fragment in either JSON or HCL format.

type ConfigEntries

type ConfigEntries struct {
	// Bootstrap is the list of config_entries that should only be persisted to
	// cluster on initial startup of a new leader if no such config exists
	// already. The type is map not structs.ConfigEntry for decoding reasons - we
	// need to figure out the right concrete type before we can decode it
	// unabiguously.
	Bootstrap []map[string]interface{} `json:"bootstrap,omitempty" hcl:"bootstrap" mapstructure:"bootstrap"`
}

type Connect

type Connect struct {
	// Enabled opts the agent into connect. It should be set on all clients and
	// servers in a cluster for correct connect operation.
	Enabled    *bool                  `json:"enabled,omitempty" hcl:"enabled" mapstructure:"enabled"`
	CAProvider *string                `json:"ca_provider,omitempty" hcl:"ca_provider" mapstructure:"ca_provider"`
	CAConfig   map[string]interface{} `json:"ca_config,omitempty" hcl:"ca_config" mapstructure:"ca_config"`
}

Connect is the agent-global connect configuration.

type Consul

type Consul struct {
	Coordinate struct {
		UpdateBatchSize  *int    `json:"update_batch_size,omitempty" hcl:"update_batch_size" mapstructure:"update_batch_size"`
		UpdateMaxBatches *int    `json:"update_max_batches,omitempty" hcl:"update_max_batches" mapstructure:"update_max_batches"`
		UpdatePeriod     *string `json:"update_period,omitempty" hcl:"update_period" mapstructure:"update_period"`
	} `json:"coordinate,omitempty" hcl:"coordinate" mapstructure:"coordinate"`

	Raft struct {
		ElectionTimeout    *string `json:"election_timeout,omitempty" hcl:"election_timeout" mapstructure:"election_timeout"`
		HeartbeatTimeout   *string `json:"heartbeat_timeout,omitempty" hcl:"heartbeat_timeout" mapstructure:"heartbeat_timeout"`
		LeaderLeaseTimeout *string `json:"leader_lease_timeout,omitempty" hcl:"leader_lease_timeout" mapstructure:"leader_lease_timeout"`
	} `json:"raft,omitempty" hcl:"raft" mapstructure:"raft"`

	Server struct {
		HealthInterval *string `json:"health_interval,omitempty" hcl:"health_interval" mapstructure:"health_interval"`
	} `json:"server,omitempty" hcl:"server" mapstructure:"server"`
}

type DNS

type DNS struct {
	AllowStale         *bool             `json:"allow_stale,omitempty" hcl:"allow_stale" mapstructure:"allow_stale"`
	ARecordLimit       *int              `json:"a_record_limit,omitempty" hcl:"a_record_limit" mapstructure:"a_record_limit"`
	DisableCompression *bool             `json:"disable_compression,omitempty" hcl:"disable_compression" mapstructure:"disable_compression"`
	EnableTruncate     *bool             `json:"enable_truncate,omitempty" hcl:"enable_truncate" mapstructure:"enable_truncate"`
	MaxStale           *string           `json:"max_stale,omitempty" hcl:"max_stale" mapstructure:"max_stale"`
	NodeTTL            *string           `json:"node_ttl,omitempty" hcl:"node_ttl" mapstructure:"node_ttl"`
	OnlyPassing        *bool             `json:"only_passing,omitempty" hcl:"only_passing" mapstructure:"only_passing"`
	RecursorTimeout    *string           `json:"recursor_timeout,omitempty" hcl:"recursor_timeout" mapstructure:"recursor_timeout"`
	ServiceTTL         map[string]string `json:"service_ttl,omitempty" hcl:"service_ttl" mapstructure:"service_ttl"`
	UDPAnswerLimit     *int              `json:"udp_answer_limit,omitempty" hcl:"udp_answer_limit" mapstructure:"udp_answer_limit"`
	NodeMetaTXT        *bool             `` /* 133-byte string literal not displayed */
	SOA                *SOA              `json:"soa,omitempty" hcl:"soa" mapstructure:"soa"`
	UseCache           *bool             `json:"use_cache,omitempty" hcl:"use_cache" mapstructure:"use_cache"`
	CacheMaxAge        *string           `json:"cache_max_age,omitempty" hcl:"cache_max_age" mapstructure:"cache_max_age"`

	// Enterprise Only
	PreferNamespace *bool `json:"prefer_namespace,omitempty" hcl:"prefer_namespace" mapstructure:"prefer_namespace"`
}

type EnterpriseMeta

type EnterpriseMeta struct{}

EnterpriseMeta stub

func (*EnterpriseMeta) ToStructs

func (_ *EnterpriseMeta) ToStructs() structs.EnterpriseMeta

type EnterpriseRuntimeConfig

type EnterpriseRuntimeConfig struct{}

type ExposeConfig

type ExposeConfig struct {
	// Checks defines whether paths associated with Consul checks will be exposed.
	// This flag triggers exposing all HTTP and GRPC check paths registered for the service.
	Checks *bool `json:"checks,omitempty" hcl:"checks" mapstructure:"checks"`

	// Port defines the port of the proxy's listener for exposed paths.
	Port *int `json:"port,omitempty" hcl:"port" mapstructure:"port"`

	// Paths is the list of paths exposed through the proxy.
	Paths []ExposePath `json:"paths,omitempty" hcl:"paths" mapstructure:"paths"`
}

ExposeConfig describes HTTP paths to expose through Envoy outside of Connect. Users can expose individual paths and/or all HTTP/GRPC paths for checks.

type ExposePath

type ExposePath struct {
	// ListenerPort defines the port of the proxy's listener for exposed paths.
	ListenerPort *int `json:"listener_port,omitempty" hcl:"listener_port" mapstructure:"listener_port"`

	// Path is the path to expose through the proxy, ie. "/metrics."
	Path *string `json:"path,omitempty" hcl:"path" mapstructure:"path"`

	// Protocol describes the upstream's service protocol.
	Protocol *string `json:"protocol,omitempty" hcl:"protocol" mapstructure:"protocol"`

	// LocalPathPort is the port that the service is listening on for the given path.
	LocalPathPort *int `json:"local_path_port,omitempty" hcl:"local_path_port" mapstructure:"local_path_port"`
}

type Flags

type Flags struct {
	// Config contains the command line arguments that can also be set
	// in a config file.
	Config Config

	// ConfigFiles contains the list of config files and directories
	// that should be read.
	ConfigFiles []string

	// ConfigFormat forces all config files to be interpreted as this
	// format independent of their extension.
	ConfigFormat *string

	// HCL contains an arbitrary config in hcl format.
	// DevMode indicates whether the agent should be started in development
	// mode. This cannot be configured in a config file.
	DevMode *bool

	HCL []string

	// Args contains the remaining unparsed flags.
	Args []string
}

Flags defines the command line flags.

type GossipLANConfig

type GossipLANConfig struct {
	GossipNodes    *int    `json:"gossip_nodes,omitempty" hcl:"gossip_nodes" mapstructure:"gossip_nodes"`
	GossipInterval *string `json:"gossip_interval,omitempty" hcl:"gossip_interval" mapstructure:"gossip_interval"`
	ProbeInterval  *string `json:"probe_interval,omitempty" hcl:"probe_interval" mapstructure:"probe_interval"`
	ProbeTimeout   *string `json:"probe_timeout,omitempty" hcl:"probe_timeout" mapstructure:"probe_timeout"`
	SuspicionMult  *int    `json:"suspicion_mult,omitempty" hcl:"suspicion_mult" mapstructure:"suspicion_mult"`
	RetransmitMult *int    `json:"retransmit_mult,omitempty" hcl:"retransmit_mult" mapstructure:"retransmit_mult"`
}

type GossipWANConfig

type GossipWANConfig struct {
	GossipNodes    *int    `json:"gossip_nodes,omitempty" hcl:"gossip_nodes" mapstructure:"gossip_nodes"`
	GossipInterval *string `json:"gossip_interval,omitempty" hcl:"gossip_interval" mapstructure:"gossip_interval"`
	ProbeInterval  *string `json:"probe_interval,omitempty" hcl:"probe_interval" mapstructure:"probe_interval"`
	ProbeTimeout   *string `json:"probe_timeout,omitempty" hcl:"probe_timeout" mapstructure:"probe_timeout"`
	SuspicionMult  *int    `json:"suspicion_mult,omitempty" hcl:"suspicion_mult" mapstructure:"suspicion_mult"`
	RetransmitMult *int    `json:"retransmit_mult,omitempty" hcl:"retransmit_mult" mapstructure:"retransmit_mult"`
}

type HTTPConfig

type HTTPConfig struct {
	BlockEndpoints     []string          `json:"block_endpoints,omitempty" hcl:"block_endpoints" mapstructure:"block_endpoints"`
	AllowWriteHTTPFrom []string          `json:"allow_write_http_from,omitempty" hcl:"allow_write_http_from" mapstructure:"allow_write_http_from"`
	ResponseHeaders    map[string]string `json:"response_headers,omitempty" hcl:"response_headers" mapstructure:"response_headers"`
	UseCache           *bool             `json:"use_cache,omitempty" hcl:"use_cache" mapstructure:"use_cache"`
}

type Limits

type Limits struct {
	HTTPMaxConnsPerClient *int     `json:"http_max_conns_per_client,omitempty" hcl:"http_max_conns_per_client" mapstructure:"http_max_conns_per_client"`
	HTTPSHandshakeTimeout *string  `json:"https_handshake_timeout,omitempty" hcl:"https_handshake_timeout" mapstructure:"https_handshake_timeout"`
	RPCHandshakeTimeout   *string  `json:"rpc_handshake_timeout,omitempty" hcl:"rpc_handshake_timeout" mapstructure:"rpc_handshake_timeout"`
	RPCMaxBurst           *int     `json:"rpc_max_burst,omitempty" hcl:"rpc_max_burst" mapstructure:"rpc_max_burst"`
	RPCMaxConnsPerClient  *int     `json:"rpc_max_conns_per_client,omitempty" hcl:"rpc_max_conns_per_client" mapstructure:"rpc_max_conns_per_client"`
	RPCRate               *float64 `json:"rpc_rate,omitempty" hcl:"rpc_rate" mapstructure:"rpc_rate"`
	KVMaxValueSize        *uint64  `json:"kv_max_value_size,omitempty" hcl:"kv_max_value_size" mapstructure:"kv_max_value_size"`
	TxnMaxReqLen          *uint64  `json:"txn_max_req_len,omitempty" hcl:"txn_max_req_len" mapstructure:"txn_max_req_len"`
}

type MeshGatewayConfig

type MeshGatewayConfig struct {
	// Mesh Gateway Mode
	Mode *string `json:"mode,omitempty" hcl:"mode" mapstructure:"mode"`
}

type Performance

type Performance struct {
	LeaveDrainTime *string `json:"leave_drain_time,omitempty" hcl:"leave_drain_time" mapstructure:"leave_drain_time"`
	RaftMultiplier *int    `json:"raft_multiplier,omitempty" hcl:"raft_multiplier" mapstructure:"raft_multiplier"` // todo(fs): validate as uint
	RPCHoldTimeout *string `json:"rpc_hold_timeout" hcl:"rpc_hold_timeout" mapstructure:"rpc_hold_timeout"`
}

type Ports

type Ports struct {
	DNS            *int `json:"dns,omitempty" hcl:"dns" mapstructure:"dns"`
	HTTP           *int `json:"http,omitempty" hcl:"http" mapstructure:"http"`
	HTTPS          *int `json:"https,omitempty" hcl:"https" mapstructure:"https"`
	SerfLAN        *int `json:"serf_lan,omitempty" hcl:"serf_lan" mapstructure:"serf_lan"`
	SerfWAN        *int `json:"serf_wan,omitempty" hcl:"serf_wan" mapstructure:"serf_wan"`
	Server         *int `json:"server,omitempty" hcl:"server" mapstructure:"server"`
	GRPC           *int `json:"grpc,omitempty" hcl:"grpc" mapstructure:"grpc"`
	ProxyMinPort   *int `json:"proxy_min_port,omitempty" hcl:"proxy_min_port" mapstructure:"proxy_min_port"`
	ProxyMaxPort   *int `json:"proxy_max_port,omitempty" hcl:"proxy_max_port" mapstructure:"proxy_max_port"`
	SidecarMinPort *int `json:"sidecar_min_port,omitempty" hcl:"sidecar_min_port" mapstructure:"sidecar_min_port"`
	SidecarMaxPort *int `json:"sidecar_max_port,omitempty" hcl:"sidecar_max_port" mapstructure:"sidecar_max_port"`
	ExposeMinPort  *int `json:"expose_min_port,omitempty" hcl:"expose_min_port" mapstructure:"expose_min_port"`
	ExposeMaxPort  *int `json:"expose_max_port,omitempty" hcl:"expose_max_port" mapstructure:"expose_max_port"`
}

type RuntimeConfig

type RuntimeConfig struct {
	// non-user configurable values
	AEInterval time.Duration

	CheckDeregisterIntervalMin time.Duration
	CheckReapInterval          time.Duration
	SegmentLimit               int
	SegmentNameLimit           int
	SyncCoordinateRateTarget   float64
	SyncCoordinateIntervalMin  time.Duration
	Revision                   string
	Version                    string
	VersionPrerelease          string

	// consul config
	ConsulCoordinateUpdateMaxBatches int
	ConsulCoordinateUpdateBatchSize  int
	ConsulCoordinateUpdatePeriod     time.Duration
	ConsulRaftElectionTimeout        time.Duration
	ConsulRaftHeartbeatTimeout       time.Duration
	ConsulRaftLeaderLeaseTimeout     time.Duration
	ConsulServerHealthInterval       time.Duration

	// ACLDisabledTTL is used by agents to determine how long they will
	// wait to check again with the servers if they discover ACLs are not
	// enabled. (not user configurable)
	//
	// hcl: acl.disabled_ttl = "duration"
	ACLDisabledTTL time.Duration

	// ACLsEnabled is used to determine whether ACLs should be enabled
	//
	// hcl: acl.enabled = boolean
	ACLsEnabled bool

	// ACLAgentMasterToken is a special token that has full read and write
	// privileges for this agent, and can be used to call agent endpoints
	// when no servers are available.
	//
	// hcl: acl.tokens.agent_master = string
	ACLAgentMasterToken string

	// ACLAgentToken is the default token used to make requests for the agent
	// itself, such as for registering itself with the catalog. If not
	// configured, the 'acl_token' will be used.
	//
	// hcl: acl.tokens.agent = string
	ACLAgentToken string

	// ACLDatacenter is the central datacenter that holds authoritative
	// ACL records. This must be the same for the entire cluster.
	// If this is not set, ACLs are not enabled. Off by default.
	//
	// hcl: acl_datacenter = string
	ACLDatacenter string

	// ACLDefaultPolicy is used to control the ACL interaction when
	// there is no defined policy. This can be "allow" which means
	// ACLs are used to black-list, or "deny" which means ACLs are
	// white-lists.
	//
	// hcl: acl.default_policy = ("allow"|"deny")
	ACLDefaultPolicy string

	// ACLDownPolicy is used to control the ACL interaction when we cannot
	// reach the ACLDatacenter and the token is not in the cache.
	// There are the following modes:
	//   * allow - Allow all requests
	//   * deny - Deny all requests
	//   * extend-cache - Ignore the cache expiration, and allow cached
	//                    ACL's to be used to service requests. This
	//                    is the default. If the ACL is not in the cache,
	//                    this acts like deny.
	//   * async-cache - Same behavior as extend-cache, but perform ACL
	//                   Lookups asynchronously when cache TTL is expired.
	//
	// hcl: acl.down_policy = ("allow"|"deny"|"extend-cache"|"async-cache")
	ACLDownPolicy string

	// DEPRECATED (ACL-Legacy-Compat)
	// ACLEnforceVersion8 is used to gate a set of ACL policy features that
	// are opt-in prior to Consul 0.8 and opt-out in Consul 0.8 and later.
	//
	// hcl: acl_enforce_version_8 = (true|false)
	ACLEnforceVersion8 bool

	// ACLEnableKeyListPolicy is used to opt-in to the "list" policy added to
	// KV ACLs in Consul 1.0.
	//
	// See https://www.consul.io/docs/guides/acl.html#list-policy-for-keys for
	// more details.
	//
	// hcl: acl.enable_key_list_policy = (true|false)
	ACLEnableKeyListPolicy bool

	// ACLMasterToken is used to bootstrap the ACL system. It should be specified
	// on the servers in the ACLDatacenter. When the leader comes online, it ensures
	// that the Master token is available. This provides the initial token.
	//
	// hcl: acl.tokens.master = string
	ACLMasterToken string

	// ACLReplicationToken is used to replicate data locally from the
	// PrimaryDatacenter. Replication is only available on servers in
	// datacenters other than the PrimaryDatacenter
	//
	// DEPRECATED (ACL-Legacy-Compat): Setting this to a non-empty value
	// also enables legacy ACL replication if ACLs are enabled and in legacy mode.
	//
	// hcl: acl.tokens.replication = string
	ACLReplicationToken string

	// ACLtokenReplication is used to indicate that both tokens and policies
	// should be replicated instead of just policies
	//
	// hcl: acl.token_replication = boolean
	ACLTokenReplication bool

	// ACLTokenTTL is used to control the time-to-live of cached ACL tokens. This has
	// a major impact on performance. By default, it is set to 30 seconds.
	//
	// hcl: acl.policy_ttl = "duration"
	ACLTokenTTL time.Duration

	// ACLPolicyTTL is used to control the time-to-live of cached ACL policies. This has
	// a major impact on performance. By default, it is set to 30 seconds.
	//
	// hcl: acl.token_ttl = "duration"
	ACLPolicyTTL time.Duration

	// ACLRoleTTL is used to control the time-to-live of cached ACL roles. This has
	// a major impact on performance. By default, it is set to 30 seconds.
	//
	// hcl: acl.role_ttl = "duration"
	ACLRoleTTL time.Duration

	// ACLToken is the default token used to make requests if a per-request
	// token is not provided. If not configured the 'anonymous' token is used.
	//
	// hcl: acl.tokens.default = string
	ACLToken string

	// ACLEnableTokenPersistence determines whether or not tokens set via the agent HTTP API
	// should be persisted to disk and reloaded when an agent restarts.
	ACLEnableTokenPersistence bool

	// AutopilotCleanupDeadServers enables the automatic cleanup of dead servers when new ones
	// are added to the peer list. Defaults to true.
	//
	// hcl: autopilot { cleanup_dead_servers = (true|false) }
	AutopilotCleanupDeadServers bool

	// AutopilotDisableUpgradeMigration will disable Autopilot's upgrade migration
	// strategy of waiting until enough newer-versioned servers have been added to the
	// cluster before promoting them to voters. (Enterprise-only)
	//
	// hcl: autopilot { disable_upgrade_migration = (true|false)
	AutopilotDisableUpgradeMigration bool

	// AutopilotLastContactThreshold is the limit on the amount of time a server can go
	// without leader contact before being considered unhealthy.
	//
	// hcl: autopilot { last_contact_threshold = "duration" }
	AutopilotLastContactThreshold time.Duration

	// AutopilotMaxTrailingLogs is the amount of entries in the Raft Log that a server can
	// be behind before being considered unhealthy. The value must be positive.
	//
	// hcl: autopilot { max_trailing_logs = int }
	AutopilotMaxTrailingLogs int

	// AutopilotMinQuorum sets the minimum number of servers required in a cluster
	// before autopilot can prune dead servers.
	//
	//hcl: autopilot { min_quorum = int }
	AutopilotMinQuorum uint

	// AutopilotRedundancyZoneTag is the Meta tag to use for separating servers
	// into zones for redundancy. If left blank, this feature will be disabled.
	// (Enterprise-only)
	//
	// hcl: autopilot { redundancy_zone_tag = string }
	AutopilotRedundancyZoneTag string

	// AutopilotServerStabilizationTime is the minimum amount of time a server must be
	// in a stable, healthy state before it can be added to the cluster. Only
	// applicable with Raft protocol version 3 or higher.
	//
	// hcl: autopilot { server_stabilization_time = "duration" }
	AutopilotServerStabilizationTime time.Duration

	// AutopilotUpgradeVersionTag is the node tag to use for version info when
	// performing upgrade migrations. If left blank, the Consul version will be used.
	//
	// (Enterprise-only)
	//
	// hcl: autopilot { upgrade_version_tag = string }
	AutopilotUpgradeVersionTag string

	// DNSAllowStale is used to enable lookups with stale
	// data. This gives horizontal read scalability since
	// any Consul server can service the query instead of
	// only the leader.
	//
	// hcl: dns_config { allow_stale = (true|false) }
	DNSAllowStale bool

	// DNSARecordLimit is used to limit the maximum number of DNS Resource
	// Records returned in the ANSWER section of a DNS response for A or AAAA
	// records for both UDP and TCP queries.
	//
	// This is not normally useful and will be limited based on the querying
	// protocol, however systems that implemented §6 Rule 9 in RFC3484
	// may want to set this to `1` in order to subvert §6 Rule 9 and
	// re-obtain the effect of randomized resource records (i.e. each
	// answer contains only one IP, but the IP changes every request).
	// RFC3484 sorts answers in a deterministic order, which defeats the
	// purpose of randomized DNS responses.  This RFC has been obsoleted
	// by RFC6724 and restores the desired behavior of randomized
	// responses, however a large number of Linux hosts using glibc(3)
	// implemented §6 Rule 9 and may need this option (e.g. CentOS 5-6,
	// Debian Squeeze, etc).
	//
	// hcl: dns_config { a_record_limit = int }
	DNSARecordLimit int

	// DNSDisableCompression is used to control whether DNS responses are
	// compressed. In Consul 0.7 this was turned on by default and this
	// config was added as an opt-out.
	//
	// hcl: dns_config { disable_compression = (true|false) }
	DNSDisableCompression bool

	// DNSDomain is the DNS domain for the records. Should end with a dot.
	// Defaults to "consul."
	//
	// hcl: domain = string
	// flag: -domain string
	DNSDomain string

	// DNSAltDomain can be set to support resolution on an additional
	// consul domain. Should end with a dot.
	// If left blank, only the primary domain will be used.
	//
	// hcl: alt_domain = string
	// flag: -alt-domain string
	DNSAltDomain string

	// DNSEnableTruncate is used to enable setting the truncate
	// flag for UDP DNS queries.  This allows unmodified
	// clients to re-query the consul server using TCP
	// when the total number of records exceeds the number
	// returned by default for UDP.
	//
	// hcl: dns_config { enable_truncate = (true|false) }
	DNSEnableTruncate bool

	// DNSMaxStale is used to bound how stale of a result is
	// accepted for a DNS lookup. This can be used with
	// AllowStale to limit how old of a value is served up.
	// If the stale result exceeds this, another non-stale
	// stale read is performed.
	//
	// hcl: dns_config { max_stale = "duration" }
	DNSMaxStale time.Duration

	// DNSNodeTTL provides the TTL value for a node query.
	//
	// hcl: dns_config { node_ttl = "duration" }
	DNSNodeTTL time.Duration

	// DNSOnlyPassing is used to determine whether to filter nodes
	// whose health checks are in any non-passing state. By
	// default, only nodes in a critical state are excluded.
	//
	// hcl: dns_config { only_passing = "duration" }
	DNSOnlyPassing bool

	// DNSRecursorTimeout specifies the timeout in seconds
	// for Consul's internal dns client used for recursion.
	// This value is used for the connection, read and write timeout.
	//
	// hcl: dns_config { recursor_timeout = "duration" }
	DNSRecursorTimeout time.Duration

	// DNSServiceTTL provides the TTL value for a service
	// query for given service. The "*" wildcard can be used
	// to set a default for all services.
	//
	// hcl: dns_config { service_ttl = map[string]"duration" }
	DNSServiceTTL map[string]time.Duration

	// DNSUDPAnswerLimit is used to limit the maximum number of DNS Resource
	// Records returned in the ANSWER section of a DNS response for UDP
	// responses without EDNS support (limited to 512 bytes).
	// This parameter is deprecated, if you want to limit the number of
	// records returned by A or AAAA questions, please use DNSARecordLimit
	// instead.
	//
	// hcl: dns_config { udp_answer_limit = int }
	DNSUDPAnswerLimit int

	// DNSNodeMetaTXT controls whether DNS queries will synthesize
	// TXT records for the node metadata and add them when not specifically
	// request (query type = TXT). If unset this will default to true
	DNSNodeMetaTXT bool

	// DNSRecursors can be set to allow the DNS servers to recursively
	// resolve non-consul domains.
	//
	// hcl: recursors = []string
	// flag: -recursor string [-recursor string]
	DNSRecursors []string

	// DNSUseCache whether or not to use cache for dns queries
	//
	// hcl: dns_config { use_cache = (true|false) }
	DNSUseCache bool

	// DNSUseCache whether or not to use cache for dns queries
	//
	// hcl: dns_config { cache_max_age = "duration" }
	DNSCacheMaxAge time.Duration

	// HTTPUseCache whether or not to use cache for http queries. Defaults
	// to true.
	//
	// hcl: http_config { use_cache = (true|false) }
	HTTPUseCache bool

	// HTTPBlockEndpoints is a list of endpoint prefixes to block in the
	// HTTP API. Any requests to these will get a 403 response.
	//
	// hcl: http_config { block_endpoints = []string }
	HTTPBlockEndpoints []string

	// AllowWriteHTTPFrom restricts the agent write endpoints to the given
	// networks. Any request to a protected endpoint that is not mactched
	// by one of these networks will get a 403 response.
	// An empty slice means no restriction.
	//
	// hcl: http_config { allow_write_http_from = []string }
	AllowWriteHTTPFrom []*net.IPNet

	// HTTPResponseHeaders are used to add HTTP header response fields to the HTTP API responses.
	//
	// hcl: http_config { response_headers = map[string]string }
	HTTPResponseHeaders map[string]string

	// Embed Telemetry Config
	Telemetry lib.TelemetryConfig

	// Datacenter is the datacenter this node is in. Defaults to "dc1".
	//
	// Datacenter is exposed via /v1/agent/self from here and
	// used in lots of places like CLI commands. Treat this as an interface
	// that must be stable.
	//
	// hcl: datacenter = string
	// flag: -datacenter string
	Datacenter string

	// Defines the maximum stale value for discovery path. Defaults to "0s".
	// Discovery paths are /v1/heath/ paths
	//
	// If not set to 0, it will try to perform stale read and perform only a
	// consistent read whenever the value is too old.
	// hcl: discovery_max_stale = "duration"
	DiscoveryMaxStale time.Duration

	// Node name is the name we use to advertise. Defaults to hostname.
	//
	// NodeName is exposed via /v1/agent/self from here and
	// used in lots of places like CLI commands. Treat this as an interface
	// that must be stable.
	//
	// hcl: node_name = string
	// flag: -node string
	NodeName string

	// AdvertiseAddrLAN is the address we use for advertising our Serf, and
	// Consul RPC IP. The address can be specified as an ip address or as a
	// go-sockaddr template which resolves to a single ip address. If not
	// specified, the bind address is used.
	//
	// hcl: advertise_addr = string
	AdvertiseAddrLAN *net.IPAddr

	// AdvertiseAddrWAN is the address we use for advertising our Serf, and
	// Consul RPC IP. The address can be specified as an ip address or as a
	// go-sockaddr template which resolves to a single ip address. If not
	// specified, the bind address is used.
	//
	// hcl: advertise_addr_wan = string
	AdvertiseAddrWAN *net.IPAddr

	// BindAddr is used to control the address we bind to.
	// If not specified, the first private IP we find is used.
	// This controls the address we use for cluster facing
	// services (Gossip, Server RPC)
	//
	// The value can be either an ip address or a go-sockaddr
	// template which resolves to a single ip address.
	//
	// hcl: bind_addr = string
	// flag: -bind string
	BindAddr *net.IPAddr

	// Bootstrap is used to bring up the first Consul server, and
	// permits that node to elect itself leader
	//
	// hcl: bootstrap = (true|false)
	// flag: -bootstrap
	Bootstrap bool

	// BootstrapExpect tries to automatically bootstrap the Consul cluster, by
	// having servers wait to bootstrap until enough servers join, and then
	// performing the bootstrap process automatically. They will disable their
	// automatic bootstrap process if they detect any servers that are part of
	// an existing cluster, so it's safe to leave this set to a non-zero value.
	//
	// hcl: bootstrap_expect = int
	// flag: -bootstrap-expect=int
	BootstrapExpect int

	// CAFile is a path to a certificate authority file. This is used with
	// VerifyIncoming or VerifyOutgoing to verify the TLS connection.
	//
	// hcl: ca_file = string
	CAFile string

	// CAPath is a path to a directory of certificate authority files. This is
	// used with VerifyIncoming or VerifyOutgoing to verify the TLS connection.
	//
	// hcl: ca_path = string
	CAPath string

	// CertFile is used to provide a TLS certificate that is used for serving
	// TLS connections. Must be provided to serve TLS connections.
	//
	// hcl: cert_file = string
	CertFile string

	// CheckUpdateInterval controls the interval on which the output of a health check
	// is updated if there is no change to the state. For example, a check in a steady
	// state may run every 5 second generating a unique output (timestamp, etc), forcing
	// constant writes. This allows Consul to defer the write for some period of time,
	// reducing the write pressure when the state is steady.
	//
	// See also: DiscardCheckOutput
	//
	// hcl: check_update_interval = "duration"
	CheckUpdateInterval time.Duration

	// Maximum size for the output of a healtcheck
	// hcl check_output_max_size int
	// flag: -check_output_max_size int
	CheckOutputMaxSize int

	// Checks contains the provided check definitions.
	//
	// hcl: checks = [
	//   {
	//     id = string
	//     name = string
	//     notes = string
	//     service_id = string
	//     token = string
	//     status = string
	//     script = string
	//     args = string
	//     http = string
	//     header = map[string][]string
	//     method = string
	//     tcp = string
	//     interval = string
	//     docker_container_id = string
	//     shell = string
	//     tls_skip_verify = (true|false)
	//     timeout = "duration"
	//     ttl = "duration"
	//     deregister_critical_service_after = "duration"
	//   },
	//   ...
	// ]
	Checks []*structs.CheckDefinition

	// ClientAddrs contains the list of ip addresses the DNS, HTTP and HTTPS
	// endpoints will bind to if the endpoints are enabled (ports > 0) and the
	// addresses are not overwritten.
	//
	// The ip addresses must be provided as a space separated list of ip
	// addresses and go-sockaddr templates.
	//
	// Client addresses cannot contain UNIX socket addresses since a socket
	// cannot be shared across multiple endpoints (no ports). To use UNIX
	// sockets configure it in 'addresses'.
	//
	// hcl: client_addr = string
	// flag: -client string
	ClientAddrs []*net.IPAddr

	// ConfigEntryBootstrap contains a list of ConfigEntries to ensure are created
	// If entries of the same Kind/Name exist already these will not update them.
	ConfigEntryBootstrap []structs.ConfigEntry

	// AutoEncryptTLS requires the client to acquire TLS certificates from
	// servers.
	AutoEncryptTLS bool

	// Additional DNS SAN entries that clients request during auto_encrypt
	// flow for their certificates.
	AutoEncryptDNSSAN []string

	// Additional IP SAN entries that clients request during auto_encrypt
	// flow for their certificates.
	AutoEncryptIPSAN []net.IP

	// AutoEncryptAllowTLS enables the server to respond to
	// AutoEncrypt.Sign requests.
	AutoEncryptAllowTLS bool

	// ConnectEnabled opts the agent into connect. It should be set on all clients
	// and servers in a cluster for correct connect operation.
	ConnectEnabled bool

	// ConnectSidecarMinPort is the inclusive start of the range of ports
	// allocated to the agent for asigning to sidecar services where no port is
	// specified.
	ConnectSidecarMinPort int

	// ConnectSidecarMaxPort is the inclusive end of the range of ports
	// allocated to the agent for asigning to sidecar services where no port is
	// specified
	ConnectSidecarMaxPort int

	// ExposeMinPort is the inclusive start of the range of ports
	// allocated to the agent for exposing checks through a proxy
	ExposeMinPort int

	// ExposeMinPort is the inclusive start of the range of ports
	// allocated to the agent for exposing checks through a proxy
	ExposeMaxPort int

	// ConnectCAProvider is the type of CA provider to use with Connect.
	ConnectCAProvider string

	// ConnectCAConfig is the config to use for the CA provider.
	ConnectCAConfig map[string]interface{}

	// ConnectTestCALeafRootChangeSpread is used to control how long the CA leaf
	// cache with spread CSRs over when a root change occurs. For now we don't
	// expose this in public config intentionally but could later with a rename.
	// We only set this from during tests to effectively make CA rotation tests
	// deterministic again.
	ConnectTestCALeafRootChangeSpread time.Duration

	// DNSAddrs contains the list of TCP and UDP addresses the DNS server will
	// bind to. If the DNS endpoint is disabled (ports.dns <= 0) the list is
	// empty.
	//
	// The ip addresses are taken from 'addresses.dns' which should contain a
	// space separated list of ip addresses and/or go-sockaddr templates.
	//
	// If 'addresses.dns' was not provided the 'client_addr' addresses are
	// used.
	//
	// The DNS server cannot be bound to UNIX sockets.
	//
	// hcl: client_addr = string addresses { dns = string } ports { dns = int }
	DNSAddrs []net.Addr

	// DNSPort is the port the DNS server listens on. The default is 8600.
	// Setting this to a value <= 0 disables the endpoint.
	//
	// hcl: ports { dns = int }
	// flags: -dns-port int
	DNSPort int

	// DNSSOA is the settings applied for DNS SOA
	// hcl: soa {}
	DNSSOA RuntimeSOAConfig

	// DataDir is the path to the directory where the local state is stored.
	//
	// hcl: data_dir = string
	// flag: -data-dir string
	DataDir string

	// DefaultQueryTime is the amount of time a blocking query will wait before
	// Consul will force a response. This value can be overridden by the 'wait'
	// query parameter.
	//
	// hcl: default_query_time = "duration"
	// flag: -default-query-time string
	DefaultQueryTime time.Duration

	// DevMode enables a fast-path mode of operation to bring up an in-memory
	// server with minimal configuration. Useful for developing Consul.
	//
	// flag: -dev
	DevMode bool

	// DisableAnonymousSignature is used to turn off the anonymous signature
	// send with the update check. This is used to deduplicate messages.
	//
	// hcl: disable_anonymous_signature = (true|false)
	DisableAnonymousSignature bool

	// DisableCoordinates controls features related to network coordinates.
	//
	// hcl: disable_coordinates = (true|false)
	DisableCoordinates bool

	// DisableHostNodeID will prevent Consul from using information from the
	// host to generate a node ID, and will cause Consul to generate a
	// random ID instead.
	//
	// hcl: disable_host_node_id = (true|false)
	// flag: -disable-host-node-id
	DisableHostNodeID bool

	// DisableHTTPUnprintableCharFilter will bypass the filter preventing HTTP
	// URLs from containing unprintable chars. This filter was added in 1.0.3 as a
	// response to a vulnerability report. Disabling this is never recommended in
	// general however some users who have keys written in older versions of
	// Consul may use this to temporarily disable the filter such that they can
	// delete those keys again! We do not recommend leaving it disabled long term.
	//
	// hcl: disable_http_unprintable_char_filter
	DisableHTTPUnprintableCharFilter bool

	// DisableKeyringFile disables writing the keyring to a file.
	//
	// hcl: disable_keyring_file = (true|false)
	// flag: -disable-keyring-file
	DisableKeyringFile bool

	// DisableRemoteExec is used to turn off the remote execution
	// feature. This is for security to prevent unknown scripts from running.
	//
	// hcl: disable_remote_exec = (true|false)
	DisableRemoteExec bool

	// DisableUpdateCheck is used to turn off the automatic update and
	// security bulletin checking.
	//
	// hcl: disable_update_check = (true|false)
	DisableUpdateCheck bool

	// DiscardCheckOutput is used to turn off storing and comparing the
	// output of health checks. This reduces the write rate on the server
	// for checks with highly volatile output. (reloadable)
	//
	// See also: CheckUpdateInterval
	//
	// hcl: discard_check_output = (true|false)
	DiscardCheckOutput bool

	// EnableAgentTLSForChecks is used to apply the agent's TLS settings in
	// order to configure the HTTP client used for health checks. Enabling
	// this allows HTTP checks to present a client certificate and verify
	// the server using the same TLS configuration as the agent (CA, cert,
	// and key).
	EnableAgentTLSForChecks bool

	// EnableCentralServiceConfig controls whether the agent should incorporate
	// centralized config such as service-defaults into local service registrations.
	//
	// hcl: enable_central_service_config = (true|false)
	EnableCentralServiceConfig bool

	// EnableDebug is used to enable various debugging features.
	//
	// hcl: enable_debug = (true|false)
	EnableDebug bool

	// EnableLocalScriptChecks controls whether health checks declared from the local
	// config file which execute scripts are enabled. This includes regular script
	// checks and Docker checks.
	//
	// hcl: (enable_script_checks|enable_local_script_checks) = (true|false)
	// flag: -enable-script-checks, -enable-local-script-checks
	EnableLocalScriptChecks bool

	// EnableRemoeScriptChecks controls whether health checks declared from the http API
	// which execute scripts are enabled. This includes regular script checks and Docker
	// checks.
	//
	// hcl: enable_script_checks = (true|false)
	// flag: -enable-script-checks
	EnableRemoteScriptChecks bool

	// EnableSyslog is used to also tee all the logs over to syslog. Only supported
	// on linux and OSX. Other platforms will generate an error.
	//
	// hcl: enable_syslog = (true|false)
	// flag: -syslog
	EnableSyslog bool

	// EnableUI enables the statically-compiled assets for the Consul web UI and
	// serves them at the default /ui/ endpoint automatically.
	//
	// hcl: enable_ui = (true|false)
	// flag: -ui
	EnableUI bool

	// EncryptKey contains the encryption key to use for the Serf communication.
	//
	// hcl: encrypt = string
	// flag: -encrypt string
	EncryptKey string

	// EncryptVerifyIncoming enforces incoming gossip encryption and can be
	// used to upshift to encrypted gossip on a running cluster.
	//
	// hcl: encrypt_verify_incoming = (true|false)
	EncryptVerifyIncoming bool

	// EncryptVerifyOutgoing enforces outgoing gossip encryption and can be
	// used to upshift to encrypted gossip on a running cluster.
	//
	// hcl: encrypt_verify_outgoing = (true|false)
	EncryptVerifyOutgoing bool

	// GRPCPort is the port the gRPC server listens on. Currently this only
	// exposes the xDS and ext_authz APIs for Envoy and it is disabled by default.
	//
	// hcl: ports { grpc = int }
	// flags: -grpc-port int
	GRPCPort int

	// GRPCAddrs contains the list of TCP addresses and UNIX sockets the gRPC
	// server will bind to. If the gRPC endpoint is disabled (ports.grpc <= 0)
	// the list is empty.
	//
	// The addresses are taken from 'addresses.grpc' which should contain a
	// space separated list of ip addresses, UNIX socket paths and/or
	// go-sockaddr templates. UNIX socket paths must be written as
	// 'unix://<full path>', e.g. 'unix:///var/run/consul-grpc.sock'.
	//
	// If 'addresses.grpc' was not provided the 'client_addr' addresses are
	// used.
	//
	// hcl: client_addr = string addresses { grpc = string } ports { grpc = int }
	GRPCAddrs []net.Addr

	// HTTPAddrs contains the list of TCP addresses and UNIX sockets the HTTP
	// server will bind to. If the HTTP endpoint is disabled (ports.http <= 0)
	// the list is empty.
	//
	// The addresses are taken from 'addresses.http' which should contain a
	// space separated list of ip addresses, UNIX socket paths and/or
	// go-sockaddr templates. UNIX socket paths must be written as
	// 'unix://<full path>', e.g. 'unix:///var/run/consul-http.sock'.
	//
	// If 'addresses.http' was not provided the 'client_addr' addresses are
	// used.
	//
	// hcl: client_addr = string addresses { http = string } ports { http = int }
	HTTPAddrs []net.Addr

	// HTTPPort is the port the HTTP server listens on. The default is 8500.
	// Setting this to a value <= 0 disables the endpoint.
	//
	// hcl: ports { http = int }
	// flags: -http-port int
	HTTPPort int

	// HTTPSAddrs contains the list of TCP addresses and UNIX sockets the HTTPS
	// server will bind to. If the HTTPS endpoint is disabled (ports.https <=
	// 0) the list is empty.
	//
	// The addresses are taken from 'addresses.https' which should contain a
	// space separated list of ip addresses, UNIX socket paths and/or
	// go-sockaddr templates. UNIX socket paths must be written as
	// 'unix://<full path>', e.g. 'unix:///var/run/consul-https.sock'.
	//
	// If 'addresses.https' was not provided the 'client_addr' addresses are
	// used.
	//
	// hcl: client_addr = string addresses { https = string } ports { https = int }
	HTTPSAddrs []net.Addr

	// HTTPMaxConnsPerClient limits the number of concurrent TCP connections the
	// HTTP(S) server will accept from any single source IP address.
	//
	// hcl: limits{ http_max_conns_per_client = 200 }
	HTTPMaxConnsPerClient int

	// HTTPSHandshakeTimeout is the time allowed for HTTPS client to complete the
	// TLS handshake and send first bytes of the request.
	//
	// hcl: limits{ https_handshake_timeout = "5s" }
	HTTPSHandshakeTimeout time.Duration

	// HTTPSPort is the port the HTTP server listens on. The default is -1.
	// Setting this to a value <= 0 disables the endpoint.
	//
	// hcl: ports { https = int }
	// flags: -https-port int
	HTTPSPort int

	// KeyFile is used to provide a TLS key that is used for serving TLS
	// connections. Must be provided to serve TLS connections.
	//
	// hcl: key_file = string
	KeyFile string

	// KVMaxValueSize controls the max allowed value size. If not set defaults
	// to raft's suggested max value size.
	//
	// hcl: limits { kv_max_value_size = uint64 }
	KVMaxValueSize uint64

	// LeaveDrainTime is used to wait after a server has left the LAN Serf
	// pool for RPCs to drain and new requests to be sent to other servers.
	//
	// hcl: performance { leave_drain_time = "duration" }
	LeaveDrainTime time.Duration

	// LeaveOnTerm controls if Serf does a graceful leave when receiving
	// the TERM signal. Defaults true on clients, false on servers. (reloadable)
	//
	// hcl: leave_on_terminate = (true|false)
	LeaveOnTerm bool

	// LogLevel is the level of the logs to write. Defaults to "INFO".
	//
	// hcl: log_level = string
	LogLevel string

	// LogJSON controls whether to output logs as structured JSON. Defaults to false.
	//
	// hcl: log_json = (true|false)
	// flag: -log-json
	LogJSON bool

	// LogFile is the path to the file where the logs get written to. Defaults to empty string.
	//
	// hcl: log_file = string
	// flags: -log-file string
	LogFile string

	// LogRotateDuration is the time configured to rotate logs based on time
	//
	// hcl: log_rotate_duration = string
	// flags: -log-rotate-duration string
	LogRotateDuration time.Duration

	// LogRotateBytes is the time configured to rotate logs based on bytes written
	//
	// hcl: log_rotate_bytes = int
	// flags: -log-rotate-bytes int
	LogRotateBytes int

	// LogRotateMaxFiles is the maximum number of log file archives to keep
	//
	// hcl: log_rotate_max_files = int
	// flags: -log-rotate-max-files int
	LogRotateMaxFiles int

	// MaxQueryTime is the maximum amount of time a blocking query can wait
	// before Consul will force a response. Consul applies jitter to the wait
	// time. The jittered time will be capped to MaxQueryTime.
	//
	// hcl: max_query_time = "duration"
	// flags: -max-query-time string
	MaxQueryTime time.Duration

	// Node ID is a unique ID for this node across space and time. Defaults
	// to a randomly-generated ID that persists in the data-dir.
	//
	// todo(fs): don't we have a requirement for this to be a UUID in a specific format?
	//
	// hcl: node_id = string
	// flag: -node-id string
	NodeID types.NodeID

	// NodeMeta contains metadata key/value pairs. These are excluded from JSON output
	// because they can be reloaded and might be stale when shown from the
	// config instead of the local state.
	// todo(fs): should the sanitizer omit them from output as well since they could be stale?
	//
	// hcl: node_meta = map[string]string
	// flag: -node-meta "key:value" -node-meta "key:value" ...
	NodeMeta map[string]string

	// NonVotingServer is whether this server will act as a non-voting member
	// of the cluster to help provide read scalability. (Enterprise-only)
	//
	// hcl: non_voting_server = (true|false)
	// flag: -non-voting-server
	NonVotingServer bool

	// PidFile is the file to store our PID in.
	//
	// hcl: pid_file = string
	PidFile string

	// PrimaryDatacenter is the central datacenter that holds authoritative
	// ACL records, replicates intentions and holds the root CA for Connect.
	// This must be the same for the entire cluster. Off by default.
	//
	// hcl: primary_datacenter = string
	PrimaryDatacenter string

	// RPCAdvertiseAddr is the TCP address Consul advertises for its RPC endpoint.
	// By default this is the bind address on the default RPC Server port. If the
	// advertise address is specified then it is used.
	//
	// hcl: bind_addr = string advertise_addr = string ports { server = int }
	RPCAdvertiseAddr *net.TCPAddr

	// RPCBindAddr is the TCP address Consul will bind to for its RPC endpoint.
	// By default this is the bind address on the default RPC Server port.
	//
	// hcl: bind_addr = string ports { server = int }
	RPCBindAddr *net.TCPAddr

	// RPCHandshakeTimeout is the timeout for reading the initial magic byte on a
	// new RPC connection. If this is set high it may allow unauthenticated users
	// to hold connections open arbitrarily long, even when mutual TLS is being
	// enforced. It may be set to 0 explicitly to disable the timeout but this
	// should never be used in production. Default is 5 seconds.
	//
	// hcl: limits { rpc_handshake_timeout = "duration" }
	RPCHandshakeTimeout time.Duration

	// RPCHoldTimeout is how long an RPC can be "held" before it is errored.
	// This is used to paper over a loss of leadership by instead holding RPCs,
	// so that the caller experiences a slow response rather than an error.
	// This period is meant to be long enough for a leader election to take
	// place, and a small jitter is applied to avoid a thundering herd.
	//
	// hcl: performance { rpc_hold_timeout = "duration" }
	RPCHoldTimeout time.Duration

	// RPCRateLimit and RPCMaxBurst control how frequently RPC calls are allowed
	// to happen. In any large enough time interval, rate limiter limits the
	// rate to RPCRate tokens per second, with a maximum burst size of
	// RPCMaxBurst events. As a special case, if RPCRate == Inf (the infinite
	// rate), RPCMaxBurst is ignored.
	//
	// See https://en.wikipedia.org/wiki/Token_bucket for more about token
	// buckets.
	//
	// hcl: limit { rpc_rate = (float64|MaxFloat64) rpc_max_burst = int }
	RPCRateLimit rate.Limit
	RPCMaxBurst  int

	// RPCMaxConnsPerClient limits the number of concurrent TCP connections the
	// RPC server will accept from any single source IP address.
	//
	// hcl: limits{ rpc_max_conns_per_client = 100 }
	RPCMaxConnsPerClient int

	// RPCProtocol is the Consul protocol version to use.
	//
	// hcl: protocol = int
	RPCProtocol int

	// RaftProtocol sets the Raft protocol version to use on this server.
	// Defaults to 3.
	//
	// hcl: raft_protocol = int
	RaftProtocol int

	// RaftSnapshotThreshold sets the minimum threshold of raft commits after which
	// a snapshot is created. Defaults to 8192
	//
	// hcl: raft_snapshot_threshold = int
	RaftSnapshotThreshold int

	// RaftSnapshotInterval sets the interval to use when checking whether to create
	// a new snapshot. Defaults to 5 seconds.
	// hcl: raft_snapshot_threshold = int
	RaftSnapshotInterval time.Duration

	// RaftTrailingLogs sets the number of log entries that will be left in the
	// log store after a snapshot. This must be large enough that a follower can
	// transfer and restore an entire snapshot of the state before this many new
	// entries have been appended. In vast majority of cases the default is plenty
	// but if there is a sustained high write throughput coupled with a huge
	// multi-gigabyte snapshot setting this higher may be necessary to allow
	// followers time to reload from snapshot without becoming unhealthy. If it's
	// too low then followers are unable to ever recover from a restart and will
	// enter a loop of constantly downloading full snapshots and never catching
	// up. If you need to change this you should reconsider your usage of Consul
	// as it is not designed to store multiple-gigabyte data sets with high write
	// throughput. Defaults to 10000.
	//
	// hcl: raft_trailing_logs = int
	RaftTrailingLogs int

	// ReconnectTimeoutLAN specifies the amount of time to wait to reconnect with
	// another agent before deciding it's permanently gone. This can be used to
	// control the time it takes to reap failed nodes from the cluster.
	//
	// hcl: reconnect_timeout = "duration"
	ReconnectTimeoutLAN time.Duration

	// ReconnectTimeoutWAN specifies the amount of time to wait to reconnect with
	// another agent before deciding it's permanently gone. This can be used to
	// control the time it takes to reap failed nodes from the cluster.
	//
	// hcl: reconnect_timeout = "duration"
	ReconnectTimeoutWAN time.Duration

	// RejoinAfterLeave controls our interaction with the cluster after leave.
	// When set to false (default), a leave causes Consul to not rejoin
	// the cluster until an explicit join is received. If this is set to
	// true, we ignore the leave, and rejoin the cluster on start.
	//
	// hcl: rejoin_after_leave = (true|false)
	// flag: -rejoin
	RejoinAfterLeave bool

	// RetryJoinIntervalLAN specifies the amount of time to wait in between join
	// attempts on agent start. The minimum allowed value is 1 second and
	// the default is 30s.
	//
	// hcl: retry_join = "duration"
	RetryJoinIntervalLAN time.Duration

	// RetryJoinIntervalWAN specifies the amount of time to wait in between join
	// attempts on agent start. The minimum allowed value is 1 second and
	// the default is 30s.
	//
	// hcl: retry_join_wan = "duration"
	RetryJoinIntervalWAN time.Duration

	// RetryJoinLAN is a list of addresses and/or go-discover expressions to
	// join with retry enabled. See
	// https://www.consul.io/docs/agent/options.html#cloud-auto-joining for
	// details.
	//
	// hcl: retry_join = []string
	// flag: -retry-join string -retry-join string
	RetryJoinLAN []string

	// RetryJoinMaxAttemptsLAN specifies the maximum number of times to retry
	// joining a host on startup. This is useful for cases where we know the
	// node will be online eventually.
	//
	// hcl: retry_max = int
	// flag: -retry-max int
	RetryJoinMaxAttemptsLAN int

	// RetryJoinMaxAttemptsWAN specifies the maximum number of times to retry
	// joining a host on startup. This is useful for cases where we know the
	// node will be online eventually.
	//
	// hcl: retry_max_wan = int
	// flag: -retry-max-wan int
	RetryJoinMaxAttemptsWAN int

	// RetryJoinWAN is a list of addresses and/or go-discover expressions to
	// join -wan with retry enabled. See
	// https://www.consul.io/docs/agent/options.html#cloud-auto-joining for
	// details.
	//
	// hcl: retry_join_wan = []string
	// flag: -retry-join-wan string -retry-join-wan string
	RetryJoinWAN []string

	// SegmentName is the network segment for this client to join.
	// (Enterprise-only)
	//
	// hcl: segment = string
	SegmentName string

	// Segments is the list of network segments for this server to
	// initialize.
	//
	// hcl: segment = [
	//   {
	//     # name is the name of the segment
	//     name = string
	//
	//     # bind is the bind ip address for this segment.
	//     bind = string
	//
	//     # port is the bind port for this segment.
	//     port = int
	//
	//     # advertise is the advertise ip address for this segment.
	//     # Defaults to the bind address if not set.
	//     advertise = string
	//
	//     # rpc_listener controls whether or not to bind a separate
	//     # RPC listener to the bind address.
	//     rpc_listener = (true|false)
	//   },
	//   ...
	// ]
	Segments []structs.NetworkSegment

	// SerfAdvertiseAddrLAN is the TCP address which is used for advertising
	// the LAN Gossip pool for both client and server. The address is the
	// combination of AdvertiseAddrLAN and the SerfPortLAN. If the advertise
	// address is not given the bind address is used.
	//
	// hcl: bind_addr = string advertise_addr = string ports { serf_lan = int }
	SerfAdvertiseAddrLAN *net.TCPAddr

	// SerfAdvertiseAddrWAN is the TCP address which is used for advertising
	// the WAN Gossip pool on the server only. The address is the combination
	// of AdvertiseAddrWAN and the SerfPortWAN. If the advertise address is not
	// given the bind address is used.
	//
	// hcl: bind_addr = string advertise_addr_wan = string ports { serf_wan = int }
	SerfAdvertiseAddrWAN *net.TCPAddr

	// SerfBindAddrLAN is the address to bind the Serf LAN TCP and UDP
	// listeners to. The ip address is either the default bind address or the
	// 'serf_lan' address which can be either an ip address or a go-sockaddr
	// template which resolves to a single ip address.
	//
	// hcl: bind_addr = string serf_lan = string ports { serf_lan = int }
	// flag: -serf-lan string
	SerfBindAddrLAN *net.TCPAddr

	// SerfBindAddrWAN is the address to bind the Serf WAN TCP and UDP
	// listeners to. The ip address is either the default bind address or the
	// 'serf_wan' address which can be either an ip address or a go-sockaddr
	// template which resolves to a single ip address.
	//
	// hcl: bind_addr = string serf_wan = string ports { serf_wan = int }
	// flag: -serf-wan string
	SerfBindAddrWAN *net.TCPAddr

	// SerfPortLAN is the port used for the LAN Gossip pool for both client and server.
	// The default is 8301.
	//
	// hcl: ports { serf_lan = int }
	SerfPortLAN int

	// SerfPortWAN is the port used for the WAN Gossip pool for the server only.
	// The default is 8302.
	//
	// hcl: ports { serf_wan = int }
	SerfPortWAN int

	// GossipLANGossipInterval is the interval between sending messages that need
	// to be gossiped that haven't been able to piggyback on probing messages.
	// If this is set to zero, non-piggyback gossip is disabled. By lowering
	// this value (more frequent) gossip messages are propagated across
	// the cluster more quickly at the expense of increased bandwidth. This
	// configuration only applies to LAN gossip communications
	//
	// The default is: 200ms
	//
	// hcl: gossip_lan { gossip_interval = duration}
	GossipLANGossipInterval time.Duration

	// GossipLANGossipNodes is the number of random nodes to send gossip messages to
	// per GossipInterval. Increasing this number causes the gossip messages to
	// propagate across the cluster more quickly at the expense of increased
	// bandwidth. This configuration only applies to LAN gossip communications
	//
	// The default is: 3
	//
	// hcl: gossip_lan { gossip_nodes = int }
	GossipLANGossipNodes int

	// GossipLANProbeInterval is the interval between random node probes. Setting
	// this lower (more frequent) will cause the memberlist cluster to detect
	// failed nodes more quickly at the expense of increased bandwidth usage.
	// This configuration only applies to LAN gossip communications
	//
	// The default is: 1s
	//
	// hcl: gossip_lan { probe_interval = duration }
	GossipLANProbeInterval time.Duration

	// GossipLANProbeTimeout is the timeout to wait for an ack from a probed node
	// before assuming it is unhealthy. This should be set to 99-percentile
	// of RTT (round-trip time) on your network. This configuration
	// only applies to the LAN gossip communications
	//
	// The default is: 500ms
	//
	// hcl: gossip_lan { probe_timeout = duration }
	GossipLANProbeTimeout time.Duration

	// GossipLANSuspicionMult is the multiplier for determining the time an
	// inaccessible node is considered suspect before declaring it dead. This
	// configuration only applies to LAN gossip communications
	//
	// The actual timeout is calculated using the formula:
	//
	//   SuspicionTimeout = SuspicionMult * log(N+1) * ProbeInterval
	//
	// This allows the timeout to scale properly with expected propagation
	// delay with a larger cluster size. The higher the multiplier, the longer
	// an inaccessible node is considered part of the cluster before declaring
	// it dead, giving that suspect node more time to refute if it is indeed
	// still alive.
	//
	// The default is: 4
	//
	// hcl: gossip_lan { suspicion_mult = int }
	GossipLANSuspicionMult int

	// GossipLANRetransmitMult is the multiplier for the number of retransmissions
	// that are attempted for messages broadcasted over gossip. This
	// configuration only applies to LAN gossip communications. The actual
	// count of retransmissions is calculated using the formula:
	//
	//   Retransmits = RetransmitMult * log(N+1)
	//
	// This allows the retransmits to scale properly with cluster size. The
	// higher the multiplier, the more likely a failed broadcast is to converge
	// at the expense of increased bandwidth.
	//
	// The default is: 4
	//
	// hcl: gossip_lan { retransmit_mult = int }
	GossipLANRetransmitMult int

	// GossipWANGossipInterval  is the interval between sending messages that need
	// to be gossiped that haven't been able to piggyback on probing messages.
	// If this is set to zero, non-piggyback gossip is disabled. By lowering
	// this value (more frequent) gossip messages are propagated across
	// the cluster more quickly at the expense of increased bandwidth. This
	// configuration only applies to WAN gossip communications
	//
	// The default is: 200ms
	//
	// hcl: gossip_wan { gossip_interval = duration}
	GossipWANGossipInterval time.Duration

	// GossipWANGossipNodes is the number of random nodes to send gossip messages to
	// per GossipInterval. Increasing this number causes the gossip messages to
	// propagate across the cluster more quickly at the expense of increased
	// bandwidth. This configuration only applies to WAN gossip communications
	//
	// The default is: 3
	//
	// hcl: gossip_wan { gossip_nodes = int }
	GossipWANGossipNodes int

	// GossipWANProbeInterval is the interval between random node probes. Setting
	// this lower (more frequent) will cause the memberlist cluster to detect
	// failed nodes more quickly at the expense of increased bandwidth usage.
	// This configuration only applies to WAN gossip communications
	//
	// The default is: 1s
	//
	// hcl: gossip_wan { probe_interval = duration }
	GossipWANProbeInterval time.Duration

	// GossipWANProbeTimeout is the timeout to wait for an ack from a probed node
	// before assuming it is unhealthy. This should be set to 99-percentile
	// of RTT (round-trip time) on your network. This configuration
	// only applies to the WAN gossip communications
	//
	// The default is: 500ms
	//
	// hcl: gossip_wan { probe_timeout = duration }
	GossipWANProbeTimeout time.Duration

	// GossipWANSuspicionMult is the multiplier for determining the time an
	// inaccessible node is considered suspect before declaring it dead. This
	// configuration only applies to WAN gossip communications
	//
	// The actual timeout is calculated using the formula:
	//
	//   SuspicionTimeout = SuspicionMult * log(N+1) * ProbeInterval
	//
	// This allows the timeout to scale properly with expected propagation
	// delay with a larger cluster size. The higher the multiplier, the longer
	// an inaccessible node is considered part of the cluster before declaring
	// it dead, giving that suspect node more time to refute if it is indeed
	// still alive.
	//
	// The default is: 4
	//
	// hcl: gossip_wan { suspicion_mult = int }
	GossipWANSuspicionMult int

	// GossipWANRetransmitMult is the multiplier for the number of retransmissions
	// that are attempted for messages broadcasted over gossip. This
	// configuration only applies to WAN gossip communications. The actual
	// count of retransmissions is calculated using the formula:
	//
	//   Retransmits = RetransmitMult * log(N+1)
	//
	// This allows the retransmits to scale properly with cluster size. The
	// higher the multiplier, the more likely a failed broadcast is to converge
	// at the expense of increased bandwidth.
	//
	// The default is: 4
	//
	// hcl: gossip_wan { retransmit_mult = int }
	GossipWANRetransmitMult int

	// ServerMode controls if this agent acts like a Consul server,
	// or merely as a client. Servers have more state, take part
	// in leader election, etc.
	//
	// hcl: server = (true|false)
	// flag: -server
	ServerMode bool

	// ServerName is used with the TLS certificates to ensure the name we
	// provide matches the certificate.
	//
	// hcl: server_name = string
	ServerName string

	// ServerPort is the port the RPC server will bind to.
	// The default is 8300.
	//
	// hcl: ports { server = int }
	ServerPort int

	// Services contains the provided service definitions:
	//
	// hcl: services = [
	//   {
	//     id = string
	//     name = string
	//     tags = []string
	//     address = string
	//     check = { check definition }
	//     checks = [ { check definition}, ... ]
	//     token = string
	//     enable_tag_override = (true|false)
	//   },
	//   ...
	// ]
	Services []*structs.ServiceDefinition

	// Minimum Session TTL.
	//
	// hcl: session_ttl_min = "duration"
	SessionTTLMin time.Duration

	// SkipLeaveOnInt controls if Serf skips a graceful leave when
	// receiving the INT signal. Defaults false on clients, true on
	// servers. (reloadable)
	//
	// hcl: skip_leave_on_interrupt = (true|false)
	SkipLeaveOnInt bool

	// StartJoinAddrsLAN is a list of addresses to attempt to join -lan when the
	// agent starts. If Serf is unable to communicate with any of these
	// addresses, then the agent will error and exit.
	//
	// hcl: start_join = []string
	// flag: -join string -join string
	StartJoinAddrsLAN []string

	// StartJoinWAN is a list of addresses to attempt to join -wan when the
	// agent starts. If Serf is unable to communicate with any of these
	// addresses, then the agent will error and exit.
	//
	// hcl: start_join_wan = []string
	// flag: -join-wan string -join-wan string
	StartJoinAddrsWAN []string

	// SyslogFacility is used to control where the syslog messages go
	// By default, goes to LOCAL0
	//
	// hcl: syslog_facility = string
	SyslogFacility string

	// TLSCipherSuites is used to specify the list of supported ciphersuites.
	//
	// The values should be a list of the following values:
	//
	//   TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305
	//   TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305
	//   TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
	//   TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
	//   TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
	//   TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
	//   TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256
	//   TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA
	//   TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256
	//   TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA
	//   TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA
	//   TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA
	//   TLS_RSA_WITH_AES_128_GCM_SHA256
	//   TLS_RSA_WITH_AES_256_GCM_SHA384
	//   TLS_RSA_WITH_AES_128_CBC_SHA256
	//   TLS_RSA_WITH_AES_128_CBC_SHA
	//   TLS_RSA_WITH_AES_256_CBC_SHA
	//   TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA
	//   TLS_RSA_WITH_3DES_EDE_CBC_SHA
	//   TLS_RSA_WITH_RC4_128_SHA
	//   TLS_ECDHE_RSA_WITH_RC4_128_SHA
	//   TLS_ECDHE_ECDSA_WITH_RC4_128_SHA
	//
	// todo(fs): IMHO, we should also support the raw 0xNNNN values from
	// todo(fs): https://golang.org/pkg/crypto/tls/#pkg-constants
	// todo(fs): since they are standardized by IANA.
	//
	// hcl: tls_cipher_suites = []string
	TLSCipherSuites []uint16

	// TLSMinVersion is used to set the minimum TLS version used for TLS
	// connections. Should be either "tls10", "tls11", "tls12" or "tls13".
	// Defaults to tls12.
	//
	// hcl: tls_min_version = string
	TLSMinVersion string

	// TLSPreferServerCipherSuites specifies whether to prefer the server's
	// cipher suite over the client cipher suites.
	//
	// hcl: tls_prefer_server_cipher_suites = (true|false)
	TLSPreferServerCipherSuites bool

	// TaggedAddresses are used to publish a set of addresses for
	// for a node, which can be used by the remote agent. We currently
	// populate only the "wan" tag based on the SerfWan advertise address,
	// but this structure is here for possible future features with other
	// user-defined tags. The "wan" tag will be used by remote agents if
	// they are configured with TranslateWANAddrs set to true.
	//
	// hcl: tagged_addresses = map[string]string
	TaggedAddresses map[string]string

	// TranslateWANAddrs controls whether or not Consul should prefer
	// the "wan" tagged address when doing lookups in remote datacenters.
	// See TaggedAddresses below for more details.
	//
	// hcl: translate_wan_addrs = (true|false)
	TranslateWANAddrs bool

	// TxnMaxReqLen configures the upper limit for the size (in bytes) of the
	// incoming request bodies for transactions to the /txn endpoint.
	//
	// hcl: limits { txn_max_req_len = uint64 }
	TxnMaxReqLen uint64

	// UIDir is the directory containing the Web UI resources.
	// If provided, the UI endpoints will be enabled.
	//
	// hcl: ui_dir = string
	// flag: -ui-dir string
	UIDir string

	//UIContentPath is a string that sets the external
	// path to a string. Default: /ui/
	UIContentPath string

	// UnixSocketGroup contains the group of the file permissions when
	// Consul binds to UNIX sockets.
	//
	// hcl: unix_sockets { group = string }
	UnixSocketGroup string

	// UnixSocketMode contains the mode of the file permissions when
	// Consul binds to UNIX sockets.
	//
	// hcl: unix_sockets { mode = string }
	UnixSocketMode string

	// UnixSocketUser contains the user of the file permissions when
	// Consul binds to UNIX sockets.
	//
	// hcl: unix_sockets { user = string }
	UnixSocketUser string

	// VerifyIncoming is used to verify the authenticity of incoming
	// connections. This means that TCP requests are forbidden, only allowing
	// for TLS. TLS connections must match a provided certificate authority.
	// This can be used to force client auth.
	//
	// hcl: verify_incoming = (true|false)
	VerifyIncoming bool

	// VerifyIncomingHTTPS is used to verify the authenticity of incoming HTTPS
	// connections. This means that TCP requests are forbidden, only allowing
	// for TLS. TLS connections must match a provided certificate authority.
	// This can be used to force client auth.
	//
	// hcl: verify_incoming_https = (true|false)
	VerifyIncomingHTTPS bool

	// VerifyIncomingRPC is used to verify the authenticity of incoming RPC
	// connections. This means that TCP requests are forbidden, only allowing
	// for TLS. TLS connections must match a provided certificate authority.
	// This can be used to force client auth.
	//
	// hcl: verify_incoming_rpc = (true|false)
	VerifyIncomingRPC bool

	// VerifyOutgoing is used to verify the authenticity of outgoing
	// connections. This means that TLS requests are used. TLS connections must
	// match a provided certificate authority. This is used to verify
	// authenticity of server nodes.
	//
	// hcl: verify_outgoing = (true|false)
	VerifyOutgoing bool

	// VerifyServerHostname is used to enable hostname verification of servers.
	// This ensures that the certificate presented is valid for
	// server.<datacenter>.<domain>. This prevents a compromised client from
	// being restarted as a server, and then intercepting request traffic as
	// well as being added as a raft peer. This should be enabled by default
	// with VerifyOutgoing, but for legacy reasons we cannot break existing
	// clients.
	//
	// hcl: verify_server_hostname = (true|false)
	VerifyServerHostname bool

	// Watches are used to monitor various endpoints and to invoke a
	// handler to act appropriately. These are managed entirely in the
	// agent layer using the standard APIs.
	//
	// See https://www.consul.io/docs/agent/watches.html for details.
	//
	// hcl: watches = [
	//   { type=string ... },
	//   { type=string ... },
	//   ...
	// ]
	//
	Watches []map[string]interface{}

	EnterpriseRuntimeConfig
}

RuntimeConfig specifies the configuration the consul agent actually uses. Is is derived from one or more Config structures which can come from files, flags and/or environment variables.

func DefaultRuntimeConfig

func DefaultRuntimeConfig(hcl string) *RuntimeConfig

func (*RuntimeConfig) APIConfig

func (c *RuntimeConfig) APIConfig(includeClientCerts bool) (*api.Config, error)

func (*RuntimeConfig) ClientAddress

func (c *RuntimeConfig) ClientAddress() (unixAddr, httpAddr, httpsAddr string)

func (*RuntimeConfig) Sanitized

func (c *RuntimeConfig) Sanitized() map[string]interface{}

Sanitized returns a JSON/HCL compatible representation of the runtime configuration where all fields with potential secrets had their values replaced by 'hidden'. In addition, network addresses and time.Duration values are formatted to improve readability.

func (*RuntimeConfig) ToTLSUtilConfig

func (c *RuntimeConfig) ToTLSUtilConfig() tlsutil.Config

type RuntimeSOAConfig

type RuntimeSOAConfig struct {
	Refresh uint32 // 3600 by default
	Retry   uint32 // 600
	Expire  uint32 // 86400
	Minttl  uint32 // 0,
}

type SOA

type SOA struct {
	Refresh *uint32 `json:"refresh,omitempty" hcl:"refresh" mapstructure:"refresh"`
	Retry   *uint32 `json:"retry,omitempty" hcl:"retry" mapstructure:"retry"`
	Expire  *uint32 `json:"expire,omitempty" hcl:"expire" mapstructure:"expire"`
	Minttl  *uint32 `json:"min_ttl,omitempty" hcl:"min_ttl" mapstructure:"min_ttl"`
}

SOA is the configuration of SOA for DNS

type Segment

type Segment struct {
	Advertise   *string `json:"advertise,omitempty" hcl:"advertise" mapstructure:"advertise"`
	Bind        *string `json:"bind,omitempty" hcl:"bind" mapstructure:"bind"`
	Name        *string `json:"name,omitempty" hcl:"name" mapstructure:"name"`
	Port        *int    `json:"port,omitempty" hcl:"port" mapstructure:"port"`
	RPCListener *bool   `json:"rpc_listener,omitempty" hcl:"rpc_listener" mapstructure:"rpc_listener"`
}

type ServiceAddress

type ServiceAddress struct {
	Address *string `json:"address,omitempty" hcl:"address" mapstructure:"address"`
	Port    *int    `json:"port,omitempty" hcl:"port" mapstructure:"port"`
}

type ServiceConnect

type ServiceConnect struct {
	// Native is true when this service can natively understand Connect.
	Native *bool `json:"native,omitempty" hcl:"native" mapstructure:"native"`

	// SidecarService is a nested Service Definition to register at the same time.
	// It's purely a convenience mechanism to allow specifying a sidecar service
	// along with the application service definition. It's nested nature allows
	// all of the fields to be defaulted which can reduce the amount of
	// boilerplate needed to register a sidecar service separately, but the end
	// result is identical to just making a second service registration via any
	// other means.
	SidecarService *ServiceDefinition `json:"sidecar_service,omitempty" hcl:"sidecar_service" mapstructure:"sidecar_service"`
}

ServiceConnect is the connect block within a service registration

type ServiceDefinition

type ServiceDefinition struct {
	Kind              *string                   `json:"kind,omitempty" hcl:"kind" mapstructure:"kind"`
	ID                *string                   `json:"id,omitempty" hcl:"id" mapstructure:"id"`
	Name              *string                   `json:"name,omitempty" hcl:"name" mapstructure:"name"`
	Tags              []string                  `json:"tags,omitempty" hcl:"tags" mapstructure:"tags"`
	Address           *string                   `json:"address,omitempty" hcl:"address" mapstructure:"address"`
	TaggedAddresses   map[string]ServiceAddress `json:"tagged_addresses,omitempty" hcl:"tagged_addresses" mapstructure:"tagged_addresses"`
	Meta              map[string]string         `json:"meta,omitempty" hcl:"meta" mapstructure:"meta"`
	Port              *int                      `json:"port,omitempty" hcl:"port" mapstructure:"port"`
	Check             *CheckDefinition          `json:"check,omitempty" hcl:"check" mapstructure:"check"`
	Checks            []CheckDefinition         `json:"checks,omitempty" hcl:"checks" mapstructure:"checks"`
	Token             *string                   `json:"token,omitempty" hcl:"token" mapstructure:"token"`
	Weights           *ServiceWeights           `json:"weights,omitempty" hcl:"weights" mapstructure:"weights"`
	EnableTagOverride *bool                     `json:"enable_tag_override,omitempty" hcl:"enable_tag_override" mapstructure:"enable_tag_override"`
	Proxy             *ServiceProxy             `json:"proxy,omitempty" hcl:"proxy" mapstructure:"proxy"`
	Connect           *ServiceConnect           `json:"connect,omitempty" hcl:"connect" mapstructure:"connect"`

	EnterpriseMeta `hcl:",squash" mapstructure:",squash"`
}

type ServiceProviderToken

type ServiceProviderToken struct {
	AccessorID *string `json:"accessor_id,omitempty" hcl:"accessor_id" mapstructure:"accessor_id"`
	SecretID   *string `json:"secret_id,omitempty" hcl:"secret_id" mapstructure:"secret_id"`
}

ServiceProviderToken groups an accessor and secret for a service provider token. Enterprise Only

type ServiceProxy

type ServiceProxy struct {
	// DestinationServiceName is required and is the name of the service to accept
	// traffic for.
	DestinationServiceName *string `json:"destination_service_name,omitempty" hcl:"destination_service_name" mapstructure:"destination_service_name"`

	// DestinationServiceID is optional and should only be specified for
	// "side-car" style proxies where the proxy is in front of just a single
	// instance of the service. It should be set to the service ID of the instance
	// being represented which must be registered to the same agent. It's valid to
	// provide a service ID that does not yet exist to avoid timing issues when
	// bootstrapping a service with a proxy.
	DestinationServiceID *string `json:"destination_service_id,omitempty" hcl:"destination_service_id" mapstructure:"destination_service_id"`

	// LocalServiceAddress is the address of the local service instance. It is
	// optional and should only be specified for "side-car" style proxies. It will
	// default to 127.0.0.1 if the proxy is a "side-car" (DestinationServiceID is
	// set) but otherwise will be ignored.
	LocalServiceAddress *string `json:"local_service_address,omitempty" hcl:"local_service_address" mapstructure:"local_service_address"`

	// LocalServicePort is the port of the local service instance. It is optional
	// and should only be specified for "side-car" style proxies. It will default
	// to the registered port for the instance if the proxy is a "side-car"
	// (DestinationServiceID is set) but otherwise will be ignored.
	LocalServicePort *int `json:"local_service_port,omitempty" hcl:"local_service_port" mapstructure:"local_service_port"`

	// Config is the arbitrary configuration data provided with the proxy
	// registration.
	Config map[string]interface{} `json:"config,omitempty" hcl:"config" mapstructure:"config"`

	// Upstreams describes any upstream dependencies the proxy instance should
	// setup.
	Upstreams []Upstream `json:"upstreams,omitempty" hcl:"upstreams" mapstructure:"upstreams"`

	// Mesh Gateway Configuration
	MeshGateway *MeshGatewayConfig `json:"mesh_gateway,omitempty" hcl:"mesh_gateway" mapstructure:"mesh_gateway"`

	// Expose defines whether checks or paths are exposed through the proxy
	Expose *ExposeConfig `json:"expose,omitempty" hcl:"expose" mapstructure:"expose"`
}

ServiceProxy is the additional config needed for a Kind = connect-proxy registration.

type ServiceWeights

type ServiceWeights struct {
	Passing *int `json:"passing,omitempty" hcl:"passing" mapstructure:"passing"`
	Warning *int `json:"warning,omitempty" hcl:"warning" mapstructure:"warning"`
}

ServiceWeights defines the registration of weights used in DNS for a Service

type Source

type Source struct {
	Name   string
	Format string
	Data   string
}

func DefaultConsulSource

func DefaultConsulSource() Source

DefaultConsulSource returns the default configuration for the consul agent. This should be merged in the tail since these values are not user configurable.

func DefaultEnterpriseSource

func DefaultEnterpriseSource() Source

DefaultEnterpriseSource returns the consul agent configuration for enterprise mode. These can be overridden by the user and therefore this source should be merged in the head and processed before user configuration.

func DefaultSource

func DefaultSource() Source

DefaultSource is the default agent configuration. This needs to be merged first in the head. todo(fs): The values are sourced from multiple sources. todo(fs): IMO, this should be the definitive default for all configurable values todo(fs): and whatever is in here should clobber every default value. Hence, no sourcing.

func DefaultVersionSource

func DefaultVersionSource() Source

DefaultVersionSource returns the version config source for the embedded version numbers.

func DevConsulSource

func DevConsulSource() Source

DevConsulSource returns the consul agent configuration for the dev mode. This should be merged in the tail after the DefaultConsulSource.

func DevSource

func DevSource() Source

DevSource is the additional default configuration for dev mode. This should be merged in the head after the default configuration.

func NonUserSource

func NonUserSource() Source

NonUserSource contains the values the user cannot configure. This needs to be merged in the tail.

func OverrideEnterpriseSource

func OverrideEnterpriseSource() Source

OverrideEnterpriseSource returns the consul agent configuration for the enterprise mode. This should be merged in the tail after the DefaultConsulSource.

func VersionSource

func VersionSource(rev, ver, verPre string) Source

VersionSource creates a config source for the version parameters. This should be merged in the tail since these values are not user configurable.

type Telemetry

type Telemetry struct {
	CirconusAPIApp                     *string  `json:"circonus_api_app,omitempty" hcl:"circonus_api_app" mapstructure:"circonus_api_app"`
	CirconusAPIToken                   *string  `json:"circonus_api_token,omitempty" hcl:"circonus_api_token" mapstructure:"circonus_api_token"`
	CirconusAPIURL                     *string  `json:"circonus_api_url,omitempty" hcl:"circonus_api_url" mapstructure:"circonus_api_url"`
	CirconusBrokerID                   *string  `json:"circonus_broker_id,omitempty" hcl:"circonus_broker_id" mapstructure:"circonus_broker_id"`
	CirconusBrokerSelectTag            *string  `json:"circonus_broker_select_tag,omitempty" hcl:"circonus_broker_select_tag" mapstructure:"circonus_broker_select_tag"`
	CirconusCheckDisplayName           *string  `json:"circonus_check_display_name,omitempty" hcl:"circonus_check_display_name" mapstructure:"circonus_check_display_name"`
	CirconusCheckForceMetricActivation *string  `` /* 154-byte string literal not displayed */
	CirconusCheckID                    *string  `json:"circonus_check_id,omitempty" hcl:"circonus_check_id" mapstructure:"circonus_check_id"`
	CirconusCheckInstanceID            *string  `json:"circonus_check_instance_id,omitempty" hcl:"circonus_check_instance_id" mapstructure:"circonus_check_instance_id"`
	CirconusCheckSearchTag             *string  `json:"circonus_check_search_tag,omitempty" hcl:"circonus_check_search_tag" mapstructure:"circonus_check_search_tag"`
	CirconusCheckTags                  *string  `json:"circonus_check_tags,omitempty" hcl:"circonus_check_tags" mapstructure:"circonus_check_tags"`
	CirconusSubmissionInterval         *string  `json:"circonus_submission_interval,omitempty" hcl:"circonus_submission_interval" mapstructure:"circonus_submission_interval"`
	CirconusSubmissionURL              *string  `json:"circonus_submission_url,omitempty" hcl:"circonus_submission_url" mapstructure:"circonus_submission_url"`
	DisableHostname                    *bool    `json:"disable_hostname,omitempty" hcl:"disable_hostname" mapstructure:"disable_hostname"`
	DogstatsdAddr                      *string  `json:"dogstatsd_addr,omitempty" hcl:"dogstatsd_addr" mapstructure:"dogstatsd_addr"`
	DogstatsdTags                      []string `json:"dogstatsd_tags,omitempty" hcl:"dogstatsd_tags" mapstructure:"dogstatsd_tags"`
	FilterDefault                      *bool    `json:"filter_default,omitempty" hcl:"filter_default" mapstructure:"filter_default"`
	PrefixFilter                       []string `json:"prefix_filter,omitempty" hcl:"prefix_filter" mapstructure:"prefix_filter"`
	MetricsPrefix                      *string  `json:"metrics_prefix,omitempty" hcl:"metrics_prefix" mapstructure:"metrics_prefix"`
	PrometheusRetentionTime            *string  `json:"prometheus_retention_time,omitempty" hcl:"prometheus_retention_time" mapstructure:"prometheus_retention_time"`
	StatsdAddr                         *string  `json:"statsd_address,omitempty" hcl:"statsd_address" mapstructure:"statsd_address"`
	StatsiteAddr                       *string  `json:"statsite_address,omitempty" hcl:"statsite_address" mapstructure:"statsite_address"`
}

type Tokens

type Tokens struct {
	Master      *string `json:"master,omitempty" hcl:"master" mapstructure:"master"`
	Replication *string `json:"replication,omitempty" hcl:"replication" mapstructure:"replication"`
	AgentMaster *string `json:"agent_master,omitempty" hcl:"agent_master" mapstructure:"agent_master"`
	Default     *string `json:"default,omitempty" hcl:"default" mapstructure:"default"`
	Agent       *string `json:"agent,omitempty" hcl:"agent" mapstructure:"agent"`

	// Enterprise Only
	ManagedServiceProvider []ServiceProviderToken `json:"managed_service_provider,omitempty" hcl:"managed_service_provider" mapstructure:"managed_service_provider"`
}

type UnixSocket

type UnixSocket struct {
	Group *string `json:"group,omitempty" hcl:"group" mapstructure:"group"`
	Mode  *string `json:"mode,omitempty" hcl:"mode" mapstructure:"mode"`
	User  *string `json:"user,omitempty" hcl:"user" mapstructure:"user"`
}

type Upstream

type Upstream struct {
	// Destination fields are the required ones for determining what this upstream
	// points to. Depending on DestinationType some other fields below might
	// further restrict the set of instances allowable.
	//
	// DestinationType would be better as an int constant but even with custom
	// JSON marshallers it causes havoc with all the mapstructure mangling we do
	// on service definitions in various places.
	DestinationType      *string `json:"destination_type,omitempty" hcl:"destination_type" mapstructure:"destination_type"`
	DestinationNamespace *string `json:"destination_namespace,omitempty" hcl:"destination_namespace" mapstructure:"destination_namespace"`
	DestinationName      *string `json:"destination_name,omitempty" hcl:"destination_name" mapstructure:"destination_name"`

	// Datacenter that the service discovery request should be run against. Note
	// for prepared queries, the actual results might be from a different
	// datacenter.
	Datacenter *string `json:"datacenter,omitempty" hcl:"datacenter" mapstructure:"datacenter"`

	// LocalBindAddress is the ip address a side-car proxy should listen on for
	// traffic destined for this upstream service. Default if empty is 127.0.0.1.
	LocalBindAddress *string `json:"local_bind_address,omitempty" hcl:"local_bind_address" mapstructure:"local_bind_address"`

	// LocalBindPort is the ip address a side-car proxy should listen on for traffic
	// destined for this upstream service. Required.
	LocalBindPort *int `json:"local_bind_port,omitempty" hcl:"local_bind_port" mapstructure:"local_bind_port"`

	// Config is an opaque config that is specific to the proxy process being run.
	// It can be used to pass arbitrary configuration for this specific upstream
	// to the proxy.
	Config map[string]interface{} `json:"config,omitempty" hcl:"config" mapstructure:"config"`

	// Mesh Gateway Configuration
	MeshGateway *MeshGatewayConfig `json:"mesh_gateway,omitempty" hcl:"mesh_gateway" mapstructure:"mesh_gateway"`
}

Upstream represents a single upstream dependency for a service or proxy. It describes the mechanism used to discover instances to communicate with (the Target) as well as any potential client configuration that may be useful such as load balancer options, timeouts etc.