ghw

package module
Version: v0.6.2 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Oct 30, 2020 License: Apache-2.0 Imports: 14 Imported by: 0

README

ghw - Golang HardWare discovery/inspection library Build Status

ghw mascot

ghw is a small Golang library providing hardware inspection and discovery for Linux and Windows. There currently exists partial support for MacOSX.

Design Principles

  • No root privileges needed for discovery

    ghw goes the extra mile to be useful without root priveleges. We query for host hardware information as directly as possible without relying on shellouts to programs like dmidecode that require root privileges to execute.

    Elevated privileges are indeed required to query for some information, but ghw will never error out if blocked from reading that information. Instead, ghw will print a warning message about the information that could not be retrieved. You may disable these warning messages with GHW_DISABLE_WARNINGS environment variable.

  • Well-documented code and plenty of example code

    The code itself should be well-documented with lots of usage examples.

  • Interfaces should be consistent across modules

    Each module in the library should be structured in a consistent fashion, and the structs returned by various library functions should have consistent attribute and method names.

Inspecting != Monitoring

ghw is a tool for gathering information about your hardware's capacity and capabilities.

It is important to point out that ghw does NOT report information that is temporary or variable. It is NOT a system monitor nor is it an appropriate tool for gathering data points for metrics that change over time. If you are looking for a system that tracks usage of CPU, memory, network I/O or disk I/O, there are plenty of great open source tools that do this! Check out the Prometheus project for a great example.

Usage

You can use the functions in ghw to determine various hardware-related information about the host computer:

Overriding the root mountpoint ghw uses

The default root mountpoint that ghw uses when looking for information about the host system is /. So, for example, when looking up CPU information on a Linux system, ghw.CPU() will use the path /proc/cpuinfo.

If you are calling ghw from a system that has an alternate root mountpoint, you can either set the GHW_CHROOT environment variable to that alternate path, or call the module constructor function with the ghw.WithChroot() modifier.

For example, if you are executing from within an application container that has bind-mounted the root host filesystem to the mount point /host, you would set GHW_CHROOT to /host so that ghw can find /proc/cpuinfo at /host/proc/cpuinfo.

Alternately, you can use the ghw.WithChroot() function like so:

cpu, err := ghw.CPU(ghw.WithChroot("/host"))
Disabling warning messages

When ghw isn't able to retrieve some information, it may print certain warning messages to stderr. To disable these warnings, simply set the GHW_DISABLE_WARNINGS environs variable:

$ ghwc memory
WARNING:
Could not determine total physical bytes of memory. This may
be due to the host being a virtual machine or container with no
/var/log/syslog file, or the current user may not have necessary
privileges to read the syslog. We are falling back to setting the
total physical amount of memory to the total usable amount of memory
memory (24GB physical, 24GB usable)
$ GHW_DISABLE_WARNINGS=1 ghwc memory
memory (24GB physical, 24GB usable)
Memory

Information about the host computer's memory can be retrieved using the ghw.Memory() function which returns a pointer to a ghw.MemoryInfo struct.

The ghw.MemoryInfo struct contains three fields:

  • ghw.MemoryInfo.TotalPhysicalBytes contains the amount of physical memory on the host
  • ghw.MemoryInfo.TotalUsableBytes contains the amount of memory the system can actually use. Usable memory accounts for things like the kernel's resident memory size and some reserved system bits
  • ghw.MemoryInfo.SupportedPageSizes is an array of integers representing the size, in bytes, of memory pages the system supports
  • ghw.MemoryInfo.Modules is an array of pointers to ghw.MemoryModule structs, one for each physical DIMM. Currently, this information is only included on Windows, with Linux support planned.
package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	memory, err := ghw.Memory()
	if err != nil {
		fmt.Printf("Error getting memory info: %v", err)
	}

	fmt.Println(memory.String())
}

Example output from my personal workstation:

memory (24GB physical, 24GB usable)
Physical versus Usable Memory

There has been some confusion regarding the difference between the total physical bytes versus total usable bytes of memory.

Some of this confusion has been due to a misunderstanding of the term "usable". As mentioned above, ghw does inspection of the system's capacity.

A host computer has two capacities when it comes to RAM. The first capacity is the amount of RAM that is contained in all memory banks (DIMMs) that are attached to the motherboard. ghw.MemoryInfo.TotalPhysicalBytes refers to this first capacity.

There is a (usually small) amount of RAM that is consumed by the bootloader before the operating system is started (booted). Once the bootloader has booted the operating system, the amount of RAM that may be used by the operating system and its applications is fixed. ghw.MemoryInfo.TotalUsableBytes refers to this second capacity.

You can determine the amount of RAM that the bootloader used (that is not made available to the operating system) by subtracting ghw.MemoryInfo.TotalUsableBytes from ghw.MemoryInfo.TotalPhysicalBytes:

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	memory, err := ghw.Memory()
	if err != nil {
		fmt.Printf("Error getting memory info: %v", err)
	}

        phys := memory.TotalPhysicalBytes
        usable := memory.TotalUsableBytes

	fmt.Printf("The bootloader consumes %d bytes of RAM\n", phys - usable)
}

Example output from my personal workstation booted into a Windows10 operating system with a Linux GRUB bootloader:

The bootloader consumes 3832720 bytes of RAM
CPU

The ghw.CPU() function returns a ghw.CPUInfo struct that contains information about the CPUs on the host system.

ghw.CPUInfo contains the following fields:

  • ghw.CPUInfo.TotalCores has the total number of physical cores the host system contains
  • ghw.CPUInfo.TotalThreads has the total number of hardware threads the host system contains
  • ghw.CPUInfo.Processors is an array of ghw.Processor structs, one for each physical processor package contained in the host

Each ghw.Processor struct contains a number of fields:

  • ghw.Processor.ID is the physical processor uint32 ID according to the system
  • ghw.Processor.NumCores is the number of physical cores in the processor package
  • ghw.Processor.NumThreads is the number of hardware threads in the processor package
  • ghw.Processor.Vendor is a string containing the vendor name
  • ghw.Processor.Model is a string containing the vendor's model name
  • ghw.Processor.Capabilities is an array of strings indicating the features the processor has enabled
  • ghw.Processor.Cores is an array of ghw.ProcessorCore structs that are packed onto this physical processor

A ghw.ProcessorCore has the following fields:

  • ghw.ProcessorCore.ID is the uint32 identifier that the host gave this core. Note that this does not necessarily equate to a zero-based index of the core within a physical package. For example, the core IDs for an Intel Core i7 are 0, 1, 2, 8, 9, and 10
  • ghw.ProcessorCore.Index is the zero-based index of the core on the physical processor package
  • ghw.ProcessorCore.NumThreads is the number of hardware threads associated with the core
  • ghw.ProcessorCore.LogicalProcessors is an array of logical processor IDs assigned to any processing unit for the core
package main

import (
	"fmt"
	"math"
	"strings"

	"github.com/jaypipes/ghw"
)

func main() {
	cpu, err := ghw.CPU()
	if err != nil {
		fmt.Printf("Error getting CPU info: %v", err)
	}

	fmt.Printf("%v\n", cpu)

	for _, proc := range cpu.Processors {
		fmt.Printf(" %v\n", proc)
		for _, core := range proc.Cores {
			fmt.Printf("  %v\n", core)
		}
		if len(proc.Capabilities) > 0 {
			// pretty-print the (large) block of capability strings into rows
			// of 6 capability strings
			rows := int(math.Ceil(float64(len(proc.Capabilities)) / float64(6)))
			for row := 1; row < rows; row = row + 1 {
				rowStart := (row * 6) - 1
				rowEnd := int(math.Min(float64(rowStart+6), float64(len(proc.Capabilities))))
				rowElems := proc.Capabilities[rowStart:rowEnd]
				capStr := strings.Join(rowElems, " ")
				if row == 1 {
					fmt.Printf("  capabilities: [%s\n", capStr)
				} else if rowEnd < len(proc.Capabilities) {
					fmt.Printf("                 %s\n", capStr)
				} else {
					fmt.Printf("                 %s]\n", capStr)
				}
			}
		}
	}
}

Example output from my personal workstation:

cpu (1 physical package, 6 cores, 12 hardware threads)
 physical package #0 (6 cores, 12 hardware threads)
  processor core #0 (2 threads), logical processors [0 6]
  processor core #1 (2 threads), logical processors [1 7]
  processor core #2 (2 threads), logical processors [2 8]
  processor core #3 (2 threads), logical processors [3 9]
  processor core #4 (2 threads), logical processors [4 10]
  processor core #5 (2 threads), logical processors [5 11]
  capabilities: [msr pae mce cx8 apic sep
                 mtrr pge mca cmov pat pse36
                 clflush dts acpi mmx fxsr sse
                 sse2 ss ht tm pbe syscall
                 nx pdpe1gb rdtscp lm constant_tsc arch_perfmon
                 pebs bts rep_good nopl xtopology nonstop_tsc
                 cpuid aperfmperf pni pclmulqdq dtes64 monitor
                 ds_cpl vmx est tm2 ssse3 cx16
                 xtpr pdcm pcid sse4_1 sse4_2 popcnt
                 aes lahf_lm pti retpoline tpr_shadow vnmi
                 flexpriority ept vpid dtherm ida arat]
Block storage

Information about the host computer's local block storage is returned from the ghw.Block() function. This function returns a pointer to a ghw.BlockInfo struct.

The ghw.BlockInfo struct contains two fields:

  • ghw.BlockInfo.TotalPhysicalBytes contains the amount of physical block storage on the host
  • ghw.BlockInfo.Disks is an array of pointers to ghw.Disk structs, one for each disk drive found by the system

Each ghw.Disk struct contains the following fields:

  • ghw.Disk.Name contains a string with the short name of the disk, e.g. "sda"
  • ghw.Disk.SizeBytes contains the amount of storage the disk provides
  • ghw.Disk.PhysicalBlockSizeBytes contains the size of the physical blocks used on the disk, in bytes
  • ghw.Disk.IsRemovable contains a boolean indicating if the disk drive is removable
  • ghw.Disk.DriveType is the type of drive. It is of type ghw.DriveType which has a ghw.DriveType.String() method that can be called to return a string representation of the bus. This string will be "HDD", "FDD", "ODD", or "SSD", which correspond to a hard disk drive (rotational), floppy drive, optical (CD/DVD) drive and solid-state drive.
  • ghw.Disk.StorageController is the type of storage controller/drive. It is of type ghw.StorageController which has a ghw.StorageController.String() method that can be called to return a string representation of the bus. This string will be "SCSI", "IDE", "virtio", "MMC", or "NVMe"
  • ghw.Disk.NUMANodeID is the numeric index of the NUMA node this disk is local to, or -1
  • ghw.Disk.Vendor contains a string with the name of the hardware vendor for the disk drive
  • ghw.Disk.Model contains a string with the vendor-assigned disk model name
  • ghw.Disk.SerialNumber contains a string with the disk's serial number
  • ghw.Disk.WWN contains a string with the disk's World Wide Name
  • ghw.Disk.Partitions contains an array of pointers to ghw.Partition structs, one for each partition on the disk

Each ghw.Partition struct contains these fields:

  • ghw.Partition.Name contains a string with the short name of the partition, e.g. "sda1"
  • ghw.Partition.SizeBytes contains the amount of storage the partition provides
  • ghw.Partition.MountPoint contains a string with the partition's mount point, or "" if no mount point was discovered
  • ghw.Partition.Type contains a string indicated the filesystem type for the partition, or "" if the system could not determine the type
  • ghw.Partition.IsReadOnly is a bool indicating the partition is read-only
  • ghw.Partition.Disk is a pointer to the ghw.Disk object associated with the partition. This will be nil if the ghw.Partition struct was returned by the ghw.DiskPartitions() library function.
package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	block, err := ghw.Block()
	if err != nil {
		fmt.Printf("Error getting block storage info: %v", err)
	}

	fmt.Printf("%v\n", block)

	for _, disk := range block.Disks {
		fmt.Printf(" %v\n", disk)
		for _, part := range disk.Partitions {
			fmt.Printf("  %v\n", part)
		}
	}
}

Example output from my personal workstation:

block storage (1 disk, 2TB physical storage)
 sda HDD (2TB) SCSI [@pci-0000:04:00.0-scsi-0:1:0:0 (node #0)] vendor=LSI model=Logical_Volume serial=600508e000000000f8253aac9a1abd0c WWN=0x600508e000000000f8253aac9a1abd0c
  /dev/sda1 (100MB)
  /dev/sda2 (187GB)
  /dev/sda3 (449MB)
  /dev/sda4 (1KB)
  /dev/sda5 (15GB)
  /dev/sda6 (2TB) [ext4] mounted@/

Note that ghw looks in the udev runtime database for some information. If you are using ghw in a container, remember to bind mount /dev/disk and /run into your container, otherwise ghw won't be able to query the udev DB or sysfs paths for information.

Topology

NOTE: Topology support is currently Linux-only. Windows support is planned.

Information about the host computer's architecture (NUMA vs. SMP), the host's node layout and processor caches can be retrieved from the ghw.Topology() function. This function returns a pointer to a ghw.TopologyInfo struct.

The ghw.TopologyInfo struct contains two fields:

  • ghw.TopologyInfo.Architecture contains an enum with the value ghw.NUMA or ghw.SMP depending on what the topology of the system is
  • ghw.TopologyInfo.Nodes is an array of pointers to ghw.TopologyNode structs, one for each topology node (typically physical processor package) found by the system

Each ghw.TopologyNode struct contains the following fields:

  • ghw.TopologyNode.ID is the system's uint32 identifier for the node
  • ghw.TopologyNode.Cores is an array of pointers to ghw.ProcessorCore structs that are contained in this node
  • ghw.TopologyNode.Caches is an array of pointers to ghw.MemoryCache structs that represent the low-level caches associated with processors and cores on the system

See above in the CPU section for information about the ghw.ProcessorCore struct and how to use and query it.

Each ghw.MemoryCache struct contains the following fields:

  • ghw.MemoryCache.Type is an enum that contains one of ghw.DATA, ghw.INSTRUCTION or ghw.UNIFIED depending on whether the cache stores CPU instructions, program data, or both
  • ghw.MemoryCache.Level is a positive integer indicating how close the cache is to the processor
  • ghw.MemoryCache.SizeBytes is an integer containing the number of bytes the cache can contain
  • ghw.MemoryCache.LogicalProcessors is an array of integers representing the logical processors that use the cache
package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	topology, err := ghw.Topology()
	if err != nil {
		fmt.Printf("Error getting topology info: %v", err)
	}

	fmt.Printf("%v\n", topology)

	for _, node := range topology.Nodes {
		fmt.Printf(" %v\n", node)
		for _, cache := range node.Caches {
			fmt.Printf("  %v\n", cache)
		}
	}
}

Example output from my personal workstation:

topology SMP (1 nodes)
 node #0 (6 cores)
  L1i cache (32 KB) shared with logical processors: 3,9
  L1i cache (32 KB) shared with logical processors: 2,8
  L1i cache (32 KB) shared with logical processors: 11,5
  L1i cache (32 KB) shared with logical processors: 10,4
  L1i cache (32 KB) shared with logical processors: 0,6
  L1i cache (32 KB) shared with logical processors: 1,7
  L1d cache (32 KB) shared with logical processors: 11,5
  L1d cache (32 KB) shared with logical processors: 10,4
  L1d cache (32 KB) shared with logical processors: 3,9
  L1d cache (32 KB) shared with logical processors: 1,7
  L1d cache (32 KB) shared with logical processors: 0,6
  L1d cache (32 KB) shared with logical processors: 2,8
  L2 cache (256 KB) shared with logical processors: 2,8
  L2 cache (256 KB) shared with logical processors: 3,9
  L2 cache (256 KB) shared with logical processors: 0,6
  L2 cache (256 KB) shared with logical processors: 10,4
  L2 cache (256 KB) shared with logical processors: 1,7
  L2 cache (256 KB) shared with logical processors: 11,5
  L3 cache (12288 KB) shared with logical processors: 0,1,10,11,2,3,4,5,6,7,8,9
Network

Information about the host computer's networking hardware is returned from the ghw.Network() function. This function returns a pointer to a ghw.NetworkInfo struct.

The ghw.NetworkInfo struct contains one field:

  • ghw.NetworkInfo.NICs is an array of pointers to ghw.NIC structs, one for each network interface controller found for the systen

Each ghw.NIC struct contains the following fields:

  • ghw.NIC.Name is the system's identifier for the NIC
  • ghw.NIC.MacAddress is the MAC address for the NIC, if any
  • ghw.NIC.IsVirtual is a boolean indicating if the NIC is a virtualized device
  • ghw.NIC.Capabilities is an array of pointers to ghw.NICCapability structs that can describe the things the NIC supports. These capabilities match the returned values from the ethtool -k <DEVICE> call on Linux

The ghw.NICCapability struct contains the following fields:

  • ghw.NICCapability.Name is the string name of the capability (e.g. "tcp-segmentation-offload")
  • ghw.NICCapability.IsEnabled is a boolean indicating whether the capability is currently enabled/active on the NIC
  • ghw.NICCapability.CanEnable is a boolean indicating whether the capability may be enabled
package main

import (
    "fmt"

    "github.com/jaypipes/ghw"
)

func main() {
    net, err := ghw.Network()
    if err != nil {
        fmt.Printf("Error getting network info: %v", err)
    }

    fmt.Printf("%v\n", net)

    for _, nic := range net.NICs {
        fmt.Printf(" %v\n", nic)

        enabledCaps := make([]int, 0)
        for x, cap := range nic.Capabilities {
            if cap.IsEnabled {
                enabledCaps = append(enabledCaps, x)
            }
        }
        if len(enabledCaps) > 0 {
            fmt.Printf("  enabled capabilities:\n")
            for _, x := range enabledCaps {
                fmt.Printf("   - %s\n", nic.Capabilities[x].Name)
            }
        }
    }
}

Example output from my personal laptop:

net (3 NICs)
 docker0
  enabled capabilities:
   - tx-checksumming
   - tx-checksum-ip-generic
   - scatter-gather
   - tx-scatter-gather
   - tx-scatter-gather-fraglist
   - tcp-segmentation-offload
   - tx-tcp-segmentation
   - tx-tcp-ecn-segmentation
   - tx-tcp-mangleid-segmentation
   - tx-tcp6-segmentation
   - udp-fragmentation-offload
   - generic-segmentation-offload
   - generic-receive-offload
   - tx-vlan-offload
   - highdma
   - tx-lockless
   - netns-local
   - tx-gso-robust
   - tx-fcoe-segmentation
   - tx-gre-segmentation
   - tx-gre-csum-segmentation
   - tx-ipxip4-segmentation
   - tx-ipxip6-segmentation
   - tx-udp_tnl-segmentation
   - tx-udp_tnl-csum-segmentation
   - tx-gso-partial
   - tx-sctp-segmentation
   - tx-esp-segmentation
   - tx-vlan-stag-hw-insert
 enp58s0f1
  enabled capabilities:
   - rx-checksumming
   - generic-receive-offload
   - rx-vlan-offload
   - tx-vlan-offload
   - highdma
 wlp59s0
  enabled capabilities:
   - scatter-gather
   - tx-scatter-gather
   - generic-segmentation-offload
   - generic-receive-offload
   - highdma
   - netns-local
PCI

ghw contains a PCI database inspection and querying facility that allows developers to not only gather information about devices on a local PCI bus but also query for information about hardware device classes, vendor and product information.

NOTE: Parsing of the PCI-IDS file database is provided by the separate github.com/jaypipes/pcidb library. You can read that library's README for more information about the various structs that are exposed on the ghw.PCIInfo struct.

The ghw.PCI() function returns a ghw.PCIInfo struct. The ghw.PCIInfo struct contains a number of fields that may be queried for PCI information:

  • ghw.PCIInfo.Classes is a map, keyed by the PCI class ID (a hex-encoded string) of pointers to pcidb.Class structs, one for each class of PCI device known to ghw
  • ghw.PCIInfo.Vendors is a map, keyed by the PCI vendor ID (a hex-encoded string) of pointers to pcidb.Vendor structs, one for each PCI vendor known to ghw
  • ghw.PCIInfo.Products is a map, keyed by the PCI product ID* (a hex-encoded string) of pointers to pcidb.Product structs, one for each PCI product known to ghw

NOTE: PCI products are often referred to by their "device ID". We use the term "product ID" in ghw because it more accurately reflects what the identifier is for: a specific product line produced by the vendor.

Listing and accessing host PCI device information

In addition to the above information, the ghw.PCIInfo struct has the following methods:

  • ghw.PCIInfo.ListDevices() []*PCIDevice
  • ghw.PCIInfo.GetDevice(address string) *PCIDevice

This methods return either an array of or a single pointer to a ghw.PCIDevice struct, which has the following fields:

  • ghw.PCIDevice.Vendor is a pointer to a pcidb.Vendor struct that describes the device's primary vendor. This will always be non-nil.
  • ghw.PCIDevice.Product is a pointer to a pcidb.Product struct that describes the device's primary product. This will always be non-nil.
  • ghw.PCIDevice.Subsystem is a pointer to a pcidb.Product struct that describes the device's secondary/sub-product. This will always be non-nil.
  • ghw.PCIDevice.Class is a pointer to a pcidb.Class struct that describes the device's class. This will always be non-nil.
  • ghw.PCIDevice.Subclass is a pointer to a pcidb.Subclass struct that describes the device's subclass. This will always be non-nil.
  • ghw.PCIDevice.ProgrammingInterface is a pointer to a pcidb.ProgrammingInterface struct that describes the device subclass' programming interface. This will always be non-nil.

The following code snippet shows how to call the ghw.PCIInfo.ListDevices() method and output a simple list of PCI address and vendor/product information:

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	pci, err := ghw.PCI()
	if err != nil {
		fmt.Printf("Error getting PCI info: %v", err)
	}
	fmt.Printf("host PCI devices:\n")
	fmt.Println("====================================================")
	devices := pci.ListDevices()
	if len(devices) == 0 {
		fmt.Printf("error: could not retrieve PCI devices\n")
		return
	}

	for _, device := range devices {
		vendor := device.Vendor
		vendorName := vendor.Name
		if len(vendor.Name) > 20 {
			vendorName = string([]byte(vendorName)[0:17]) + "..."
		}
		product := device.Product
		productName := product.Name
		if len(product.Name) > 40 {
			productName = string([]byte(productName)[0:37]) + "..."
		}
		fmt.Printf("%-12s\t%-20s\t%-40s\n", device.Address, vendorName, productName)
	}
}

on my local workstation the output of the above looks like the following:

host PCI devices:
====================================================
0000:00:00.0	Intel Corporation   	5520/5500/X58 I/O Hub to ESI Port
0000:00:01.0	Intel Corporation   	5520/5500/X58 I/O Hub PCI Express Roo...
0000:00:02.0	Intel Corporation   	5520/5500/X58 I/O Hub PCI Express Roo...
0000:00:03.0	Intel Corporation   	5520/5500/X58 I/O Hub PCI Express Roo...
0000:00:07.0	Intel Corporation   	5520/5500/X58 I/O Hub PCI Express Roo...
0000:00:10.0	Intel Corporation   	7500/5520/5500/X58 Physical and Link ...
0000:00:10.1	Intel Corporation   	7500/5520/5500/X58 Routing and Protoc...
0000:00:14.0	Intel Corporation   	7500/5520/5500/X58 I/O Hub System Man...
0000:00:14.1	Intel Corporation   	7500/5520/5500/X58 I/O Hub GPIO and S...
0000:00:14.2	Intel Corporation   	7500/5520/5500/X58 I/O Hub Control St...
0000:00:14.3	Intel Corporation   	7500/5520/5500/X58 I/O Hub Throttle R...
0000:00:19.0	Intel Corporation   	82567LF-2 Gigabit Network Connection
0000:00:1a.0	Intel Corporation   	82801JI (ICH10 Family) USB UHCI Contr...
0000:00:1a.1	Intel Corporation   	82801JI (ICH10 Family) USB UHCI Contr...
0000:00:1a.2	Intel Corporation   	82801JI (ICH10 Family) USB UHCI Contr...
0000:00:1a.7	Intel Corporation   	82801JI (ICH10 Family) USB2 EHCI Cont...
0000:00:1b.0	Intel Corporation   	82801JI (ICH10 Family) HD Audio Contr...
0000:00:1c.0	Intel Corporation   	82801JI (ICH10 Family) PCI Express Ro...
0000:00:1c.1	Intel Corporation   	82801JI (ICH10 Family) PCI Express Po...
0000:00:1c.4	Intel Corporation   	82801JI (ICH10 Family) PCI Express Ro...
0000:00:1d.0	Intel Corporation   	82801JI (ICH10 Family) USB UHCI Contr...
0000:00:1d.1	Intel Corporation   	82801JI (ICH10 Family) USB UHCI Contr...
0000:00:1d.2	Intel Corporation   	82801JI (ICH10 Family) USB UHCI Contr...
0000:00:1d.7	Intel Corporation   	82801JI (ICH10 Family) USB2 EHCI Cont...
0000:00:1e.0	Intel Corporation   	82801 PCI Bridge
0000:00:1f.0	Intel Corporation   	82801JIR (ICH10R) LPC Interface Contr...
0000:00:1f.2	Intel Corporation   	82801JI (ICH10 Family) SATA AHCI Cont...
0000:00:1f.3	Intel Corporation   	82801JI (ICH10 Family) SMBus Controller
0000:01:00.0	NEC Corporation     	uPD720200 USB 3.0 Host Controller
0000:02:00.0	Marvell Technolog...	88SE9123 PCIe SATA 6.0 Gb/s controller
0000:02:00.1	Marvell Technolog...	88SE912x IDE Controller
0000:03:00.0	NVIDIA Corporation  	GP107 [GeForce GTX 1050 Ti]
0000:03:00.1	NVIDIA Corporation  	UNKNOWN
0000:04:00.0	LSI Logic / Symbi...	SAS2004 PCI-Express Fusion-MPT SAS-2 ...
0000:06:00.0	Qualcomm Atheros    	AR5418 Wireless Network Adapter [AR50...
0000:08:03.0	LSI Corporation     	FW322/323 [TrueFire] 1394a Controller
0000:3f:00.0	Intel Corporation   	UNKNOWN
0000:3f:00.1	Intel Corporation   	Xeon 5600 Series QuickPath Architectu...
0000:3f:02.0	Intel Corporation   	Xeon 5600 Series QPI Link 0
0000:3f:02.1	Intel Corporation   	Xeon 5600 Series QPI Physical 0
0000:3f:02.2	Intel Corporation   	Xeon 5600 Series Mirror Port Link 0
0000:3f:02.3	Intel Corporation   	Xeon 5600 Series Mirror Port Link 1
0000:3f:03.0	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:03.1	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:03.4	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:04.0	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:04.1	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:04.2	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:04.3	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:05.0	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:05.1	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:05.2	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:05.3	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:06.0	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:06.1	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:06.2	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...
0000:3f:06.3	Intel Corporation   	Xeon 5600 Series Integrated Memory Co...

The following code snippet shows how to call the ghw.PCIInfo.GetDevice() method and use its returned ghw.PCIDevice struct pointer:

package main

import (
	"fmt"
	"os"

	"github.com/jaypipes/ghw"
)

func main() {
	pci, err := ghw.PCI()
	if err != nil {
		fmt.Printf("Error getting PCI info: %v", err)
	}

	addr := "0000:00:00.0"
	if len(os.Args) == 2 {
		addr = os.Args[1]
	}
	fmt.Printf("PCI device information for %s\n", addr)
	fmt.Println("====================================================")
	deviceInfo := pci.GetDevice(addr)
	if deviceInfo == nil {
		fmt.Printf("could not retrieve PCI device information for %s\n", addr)
		return
	}

	vendor := deviceInfo.Vendor
	fmt.Printf("Vendor: %s [%s]\n", vendor.Name, vendor.ID)
	product := deviceInfo.Product
	fmt.Printf("Product: %s [%s]\n", product.Name, product.ID)
	subsystem := deviceInfo.Subsystem
	subvendor := pci.Vendors[subsystem.VendorID]
	subvendorName := "UNKNOWN"
	if subvendor != nil {
		subvendorName = subvendor.Name
	}
	fmt.Printf("Subsystem: %s [%s] (Subvendor: %s)\n", subsystem.Name, subsystem.ID, subvendorName)
	class := deviceInfo.Class
	fmt.Printf("Class: %s [%s]\n", class.Name, class.ID)
	subclass := deviceInfo.Subclass
	fmt.Printf("Subclass: %s [%s]\n", subclass.Name, subclass.ID)
	progIface := deviceInfo.ProgrammingInterface
	fmt.Printf("Programming Interface: %s [%s]\n", progIface.Name, progIface.ID)
}

Here's a sample output from my local workstation:

PCI device information for 0000:03:00.0
====================================================
Vendor: NVIDIA Corporation [10de]
Product: GP107 [GeForce GTX 1050 Ti] [1c82]
Subsystem: UNKNOWN [8613] (Subvendor: ASUSTeK Computer Inc.)
Class: Display controller [03]
Subclass: VGA compatible controller [00]
Programming Interface: VGA controller [00]
GPU

Information about the host computer's graphics hardware is returned from the ghw.GPU() function. This function returns a pointer to a ghw.GPUInfo struct.

The ghw.GPUInfo struct contains one field:

  • ghw.GPUInfo.GraphicCards is an array of pointers to ghw.GraphicsCard structs, one for each graphics card found for the systen

Each ghw.GraphicsCard struct contains the following fields:

  • ghw.GraphicsCard.Index is the system's numeric zero-based index for the card on the bus
  • ghw.GraphicsCard.Address is the PCI address for the graphics card
  • ghw.GraphicsCard.DeviceInfo is a pointer to a ghw.PCIDevice struct describing the graphics card. This may be nil if no PCI device information could be determined for the card.
  • ghw.GraphicsCard.Node is an pointer to a ghw.TopologyNode struct that the GPU/graphics card is affined to. On non-NUMA systems, this will always be nil.
package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	gpu, err := ghw.GPU()
	if err != nil {
		fmt.Printf("Error getting GPU info: %v", err)
	}

	fmt.Printf("%v\n", gpu)

	for _, card := range gpu.GraphicsCards {
		fmt.Printf(" %v\n", card)
	}
}

Example output from my personal workstation:

gpu (1 graphics card)
 card #0 @0000:03:00.0 -> class: 'Display controller' vendor: 'NVIDIA Corporation' product: 'GP107 [GeForce GTX 1050 Ti]'

NOTE: You can read more about the fields of the ghw.PCIDevice struct if you'd like to dig deeper into PCI subsystem and programming interface information

NOTE: You can read more about the fields of the ghw.TopologyNode struct if you'd like to dig deeper into the NUMA/topology subsystem

Chassis

The host's chassis information is accessible with the ghw.Chassis() function. This function returns a pointer to a ghw.ChassisInfo struct.

The ghw.ChassisInfo struct contains multiple fields:

  • ghw.ChassisInfo.AssetTag is a string with the chassis asset tag
  • ghw.ChassisInfo.SerialNumber is a string with the chassis serial number
  • ghw.ChassisInfo.Type is a string with the chassis type code
  • ghw.ChassisInfo.TypeDescription is a string with a description of the chassis type
  • ghw.ChassisInfo.Vendor is a string with the chassis vendor
  • ghw.ChassisInfo.Version is a string with the chassis version

NOTE: These fields are often missing for non-server hardware. Don't be surprised to see empty string or "None" values.

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	chassis, err := ghw.Chassis()
	if err != nil {
		fmt.Printf("Error getting chassis info: %v", err)
	}

	fmt.Printf("%v\n", chassis)
}

Example output from my personal workstation:

chassis type=Desktop vendor=System76 version=thelio-r1

NOTE: Some of the values such as serial numbers are shown as unknown because the Linux kernel by default disallows access to those fields if you're not running as root. They will be populated if it runs as root or otherwise you may see warnings like the following:

WARNING: Unable to read chassis_serial: open /sys/class/dmi/id/chassis_serial: permission denied

You can ignore them or use the Disabling warning messages feature to quiet things down.

BIOS

The host's basis input/output system (BIOS) information is accessible with the ghw.BIOS() function. This function returns a pointer to a ghw.BIOSInfo struct.

The ghw.BIOSInfo struct contains multiple fields:

  • ghw.BIOSInfo.Vendor is a string with the BIOS vendor
  • ghw.BIOSInfo.Version is a string with the BIOS version
  • ghw.BIOSInfo.Date is a string with the date the BIOS was flashed/created
package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	bios, err := ghw.BIOS()
	if err != nil {
		fmt.Printf("Error getting BIOS info: %v", err)
	}

	fmt.Printf("%v\n", bios)
}

Example output from my personal workstation:

bios vendor=System76 version=F2 Z5 date=11/14/2018
Baseboard

The host's baseboard information is accessible with the ghw.Baseboard() function. This function returns a pointer to a ghw.BaseboardInfo struct.

The ghw.BaseboardInfo struct contains multiple fields:

  • ghw.BaseboardInfo.AssetTag is a string with the baseboard asset tag
  • ghw.BaseboardInfo.SerialNumber is a string with the baseboard serial number
  • ghw.BaseboardInfo.Vendor is a string with the baseboard vendor
  • ghw.BaseboardInfo.Version is a string with the baseboard version

NOTE: These fields are often missing for non-server hardware. Don't be surprised to see empty string or "None" values.

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	baseboard, err := ghw.Baseboard()
	if err != nil {
		fmt.Printf("Error getting baseboard info: %v", err)
	}

	fmt.Printf("%v\n", baseboard)
}

Example output from my personal workstation:

baseboard vendor=System76 version=thelio-r1

NOTE: Some of the values such as serial numbers are shown as unknown because the Linux kernel by default disallows access to those fields if you're not running as root. They will be populated if it runs as root or otherwise you may see warnings like the following:

WARNING: Unable to read board_serial: open /sys/class/dmi/id/board_serial: permission denied

You can ignore them or use the Disabling warning messages feature to quiet things down.

Product

The host's product information is accessible with the ghw.Product() function. This function returns a pointer to a ghw.ProductInfo struct.

The ghw.ProductInfo struct contains multiple fields:

  • ghw.ProductInfo.Family is a string describing the product family
  • ghw.ProductInfo.Name is a string with the product name
  • ghw.ProductInfo.SerialNumber is a string with the product serial number
  • ghw.ProductInfo.UUID is a string with the product UUID
  • ghw.ProductInfo.SKU is a string with the product stock unit identifier (SKU)
  • ghw.ProductInfo.Vendor is a string with the product vendor
  • ghw.ProductInfo.Version is a string with the product version

NOTE: These fields are often missing for non-server hardware. Don't be surprised to see empty string, "Default string" or "None" values.

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	product, err := ghw.Product()
	if err != nil {
		fmt.Printf("Error getting product info: %v", err)
	}

	fmt.Printf("%v\n", product)
}

Example output from my personal workstation:

product family=Default string name=Thelio vendor=System76 sku=Default string version=thelio-r1

NOTE: Some of the values such as serial numbers are shown as unknown because the Linux kernel by default disallows access to those fields if you're not running as root. They will be populated if it runs as root or otherwise you may see warnings like the following:

WARNING: Unable to read product_serial: open /sys/class/dmi/id/product_serial: permission denied

You can ignore them or use the Disabling warning messages feature to quiet things down.

Serialization

All of the ghw XXXInfo structs -- e.g. ghw.CPUInfo -- have two methods for producing a serialized JSON or YAML string representation of the contained information:

  • JSONString() returns a string containing the information serialized into JSON. It accepts a single boolean parameter indicating whether to use indentation when outputting the string
  • YAMLString() returns a string containing the information serialized into YAML
package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	mem, err := ghw.Memory()
	if err != nil {
		fmt.Printf("Error getting memory info: %v", err)
	}

	fmt.Printf("%s", mem.YAMLString())
}

the above example code prints the following out on my local workstation:

memory:
  supported_page_sizes:
  - 1073741824
  - 2097152
  total_physical_bytes: 25263415296
  total_usable_bytes: 25263415296

Developers

Contributions to ghw are welcomed! Fork the repo on GitHub and submit a pull request with your proposed changes. Or, feel free to log an issue for a feature request or bug report.

Running tests

You can run unit tests easily using the make test command, like so:

[jaypipes@uberbox ghw]$ make test
go test github.com/jaypipes/ghw github.com/jaypipes/ghw/cmd/ghwc
ok      github.com/jaypipes/ghw 0.084s
?       github.com/jaypipes/ghw/cmd/ghwc    [no test files]

Documentation

Overview

package ghw can determine various hardware-related information about the host computer:

* Memory * CPU * Block storage * Topology * Network * PCI * GPU

Memory

Information about the host computer's memory can be retrieved using the Memory function which returns a pointer to a MemoryInfo struct.

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	memory, err := ghw.Memory()
	if err != nil {
		fmt.Printf("Error getting memory info: %v", err)
	}

	fmt.Println(memory.String())
}

CPU

The CPU function returns a CPUInfo struct that contains information about the CPUs on the host system.

package main

import (
	"fmt"
	"math"
	"strings"

	"github.com/jaypipes/ghw"
)

func main() {
	cpu, err := ghw.CPU()
	if err != nil {
		fmt.Printf("Error getting CPU info: %v", err)
	}

	fmt.Printf("%v\n", cpu)

	for _, proc := range cpu.Processors {
		fmt.Printf(" %v\n", proc)
		for _, core := range proc.Cores {
			fmt.Printf("  %v\n", core)
		}
		if len(proc.Capabilities) > 0 {
			// pretty-print the (large) block of capability strings into rows
			// of 6 capability strings
			rows := int(math.Ceil(float64(len(proc.Capabilities)) / float64(6)))
			for row := 1; row < rows; row = row + 1 {
				rowStart := (row * 6) - 1
				rowEnd := int(math.Min(float64(rowStart+6), float64(len(proc.Capabilities))))
				rowElems := proc.Capabilities[rowStart:rowEnd]
				capStr := strings.Join(rowElems, " ")
				if row == 1 {
					fmt.Printf("  capabilities: [%s\n", capStr)
				} else if rowEnd < len(proc.Capabilities) {
					fmt.Printf("                 %s\n", capStr)
				} else {
					fmt.Printf("                 %s]\n", capStr)
				}
			}
		}
	}
}

Block storage

Information about the host computer's local block storage is returned from the Block function. This function returns a pointer to a BlockInfo struct.

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	block, err := ghw.Block()
	if err != nil {
		fmt.Printf("Error getting block storage info: %v", err)
	}

	fmt.Printf("%v\n", block)

	for _, disk := range block.Disks {
		fmt.Printf(" %v\n", disk)
		for _, part := range disk.Partitions {
			fmt.Printf("  %v\n", part)
		}
	}
}

Topology

Information about the host computer's architecture (NUMA vs. SMP), the host's node layout and processor caches can be retrieved from the Topology function. This function returns a pointer to a TopologyInfo struct.

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	topology, err := ghw.Topology()
	if err != nil {
		fmt.Printf("Error getting topology info: %v", err)
	}

	fmt.Printf("%v\n", topology)

	for _, node := range topology.Nodes {
		fmt.Printf(" %v\n", node)
		for _, cache := range node.Caches {
			fmt.Printf("  %v\n", cache)
		}
	}
}

Network

Information about the host computer's networking hardware is returned from the Network function. This function returns a pointer to a NetworkInfo struct.

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	net, err := ghw.Network()
	if err != nil {
		fmt.Printf("Error getting network info: %v", err)
	}

	fmt.Printf("%v\n", net)

	for _, nic := range net.NICs {
		fmt.Printf(" %v\n", nic)

		enabledCaps := make([]int, 0)
		for x, cap := range nic.Capabilities {
			if cap.IsEnabled {
				enabledCaps = append(enabledCaps, x)
			}
		}
		if len(enabledCaps) > 0 {
			fmt.Printf("  enabled capabilities:\n")
			for _, x := range enabledCaps {
				fmt.Printf("   - %s\n", nic.Capabilities[x].Name)
			}
		}
	}
}

PCI

ghw contains a PCI database inspection and querying facility that allows developers to not only gather information about devices on a local PCI bus but also query for information about hardware device classes, vendor and product information.

**NOTE**: Parsing of the PCI-IDS file database is provided by the separate http://github.com/jaypipes/pcidb library. You can read that library's README for more information about the various structs that are exposed on the PCIInfo struct.

PCIInfo.ListDevices is used to iterate over a host's PCI devices:

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	pci, err := ghw.PCI()
	if err != nil {
		fmt.Printf("Error getting PCI info: %v", err)
	}
	fmt.Printf("host PCI devices:\n")
	fmt.Println("====================================================")
	devices := pci.ListDevices()
	if len(devices) == 0 {
		fmt.Printf("error: could not retrieve PCI devices\n")
		return
	}

	for _, device := range devices {
		vendor := device.Vendor
		vendorName := vendor.Name
		if len(vendor.Name) > 20 {
			vendorName = string([]byte(vendorName)[0:17]) + "..."
		}
		product := device.Product
		productName := product.Name
		if len(product.Name) > 40 {
			productName = string([]byte(productName)[0:37]) + "..."
		}
		fmt.Printf("%-12s\t%-20s\t%-40s\n", device.Address, vendorName, productName)
	}
}

The following code snippet shows how to call the PCIInfo.GetDevice method and use its returned PCIDevice struct pointer:

package main

import (
	"fmt"
	"os"

	"github.com/jaypipes/ghw"
)

func main() {
	pci, err := ghw.PCI()
	if err != nil {
		fmt.Printf("Error getting PCI info: %v", err)
	}

	addr := "0000:00:00.0"
	if len(os.Args) == 2 {
		addr = os.Args[1]
	}
	fmt.Printf("PCI device information for %s\n", addr)
	fmt.Println("====================================================")
	deviceInfo := pci.GetDevice(addr)
	if deviceInfo == nil {
		fmt.Printf("could not retrieve PCI device information for %s\n", addr)
		return
	}

	vendor := deviceInfo.Vendor
	fmt.Printf("Vendor: %s [%s]\n", vendor.Name, vendor.ID)
	product := deviceInfo.Product
	fmt.Printf("Product: %s [%s]\n", product.Name, product.ID)
	subsystem := deviceInfo.Subsystem
	subvendor := pci.Vendors[subsystem.VendorID]
	subvendorName := "UNKNOWN"
	if subvendor != nil {
		subvendorName = subvendor.Name
	}
	fmt.Printf("Subsystem: %s [%s] (Subvendor: %s)\n", subsystem.Name, subsystem.ID, subvendorName)
	class := deviceInfo.Class
	fmt.Printf("Class: %s [%s]\n", class.Name, class.ID)
	subclass := deviceInfo.Subclass
	fmt.Printf("Subclass: %s [%s]\n", subclass.Name, subclass.ID)
	progIface := deviceInfo.ProgrammingInterface
	fmt.Printf("Programming Interface: %s [%s]\n", progIface.Name, progIface.ID)
}

GPU

Information about the host computer's graphics hardware is returned from the GPU function. This function returns a pointer to a GPUInfo struct.

package main

import (
	"fmt"

	"github.com/jaypipes/ghw"
)

func main() {
	gpu, err := ghw.GPU()
	if err != nil {
		fmt.Printf("Error getting GPU info: %v", err)
	}

	fmt.Printf("%v\n", gpu)

	for _, card := range gpu.GraphicsCards {
		fmt.Printf(" %v\n", card)
	}
}

Index

Constants

View Source
const (
	MEMORY_CACHE_TYPE_UNIFIED     = memory.CACHE_TYPE_UNIFIED
	MEMORY_CACHE_TYPE_INSTRUCTION = memory.CACHE_TYPE_INSTRUCTION
	MEMORY_CACHE_TYPE_DATA        = memory.CACHE_TYPE_DATA
)
View Source
const (
	DRIVE_TYPE_UNKNOWN = block.DRIVE_TYPE_UNKNOWN
	DRIVE_TYPE_HDD     = block.DRIVE_TYPE_HDD
	DRIVE_TYPE_FDD     = block.DRIVE_TYPE_FDD
	DRIVE_TYPE_ODD     = block.DRIVE_TYPE_ODD
	DRIVE_TYPE_SSD     = block.DRIVE_TYPE_SSD
)
View Source
const (
	STORAGE_CONTROLLER_UNKNOWN = block.STORAGE_CONTROLLER_UNKNOWN
	STORAGE_CONTROLLER_IDE     = block.STORAGE_CONTROLLER_IDE
	STORAGE_CONTROLLER_SCSI    = block.STORAGE_CONTROLLER_SCSI
	STORAGE_CONTROLLER_NVME    = block.STORAGE_CONTROLLER_NVME
	STORAGE_CONTROLLER_VIRTIO  = block.STORAGE_CONTROLLER_VIRTIO
	STORAGE_CONTROLLER_MMC     = block.STORAGE_CONTROLLER_MMC
)
View Source
const (
	ARCHITECTURE_SMP  = topology.ARCHITECTURE_SMP
	ARCHITECTURE_NUMA = topology.ARCHITECTURE_NUMA
)

Variables

View Source
var (
	PCI                  = pci.New
	PCIAddressFromString = pci.AddressFromString
)
View Source
var (
	BIOS = bios.New
)
View Source
var (
	Baseboard = baseboard.New
)
View Source
var (
	Block = block.New
)
View Source
var (
	CPU = cpu.New
)
View Source
var (
	Chassis = chassis.New
)
View Source
var (
	GPU = gpu.New
)
View Source
var (
	Memory = memory.New
)
View Source
var (
	Network = net.New
)
View Source
var (
	Product = product.New
)
View Source
var (
	Topology = topology.New
)
View Source
var (
	WithChroot = option.WithChroot
)

Functions

This section is empty.

Types

type Architecture

type Architecture = topology.Architecture

type BIOSInfo

type BIOSInfo = bios.Info

type BaseboardInfo

type BaseboardInfo = baseboard.Info

type BlockInfo

type BlockInfo = block.Info

type CPUInfo

type CPUInfo = cpu.Info

type ChassisInfo

type ChassisInfo = chassis.Info

type Disk

type Disk = block.Disk

type DriveType

type DriveType = block.DriveType

type GPUInfo

type GPUInfo = gpu.Info

type GraphicsCard

type GraphicsCard = gpu.GraphicsCard

type HostInfo

type HostInfo struct {
	Memory    *memory.Info    `json:"memory"`
	Block     *block.Info     `json:"block"`
	CPU       *cpu.Info       `json:"cpu"`
	Topology  *topology.Info  `json:"topology"`
	Network   *net.Info       `json:"network"`
	GPU       *gpu.Info       `json:"gpu"`
	Chassis   *chassis.Info   `json:"chassis"`
	BIOS      *bios.Info      `json:"bios"`
	Baseboard *baseboard.Info `json:"baseboard"`
	Product   *product.Info   `json:"product"`
}

HostInfo is a wrapper struct containing information about the host system's memory, block storage, CPU, etc

func Host

func Host(opts ...*WithOption) (*HostInfo, error)

Host returns a pointer to a HostInfo struct that contains fields with information about the host system's CPU, memory, network devices, etc

func (*HostInfo) JSONString

func (i *HostInfo) JSONString(indent bool) string

JSONString returns a string with the host information formatted as JSON under a top-level "host:" key

func (*HostInfo) String

func (info *HostInfo) String() string

String returns a newline-separated output of the HostInfo's component structs' String-ified output

func (*HostInfo) YAMLString

func (i *HostInfo) YAMLString() string

YAMLString returns a string with the host information formatted as YAML under a top-level "host:" key

type MemoryCacheType

type MemoryCacheType = memory.CacheType

type MemoryInfo

type MemoryInfo = memory.Info

type MemoryModule

type MemoryModule = memory.Module

type NIC

type NIC = net.NIC

type NICCapability

type NICCapability = net.NICCapability

type NetworkInfo

type NetworkInfo = net.Info

type PCIAddress

type PCIAddress = pci.Address

type PCIDevice

type PCIDevice = pci.Device

type PCIInfo

type PCIInfo = pci.Info

type Partition

type Partition = block.Partition

type ProductInfo

type ProductInfo = product.Info

type StorageController

type StorageController = block.StorageController

type TopologyInfo

type TopologyInfo = topology.Info

type TopologyNode

type TopologyNode = topology.Node

type WithOption

type WithOption = option.Option

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
t or T : Toggle theme light dark auto
y or Y : Canonical URL