opts

package
v0.0.0-...-12052a3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jul 29, 2021 License: MIT Imports: 10 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

func FuncOpts 

func FuncOpts(fn string) string

FuncOpts is the option set for handling function type.

func HSLAColor 

func HSLAColor(h, s, l, a float32) string

HSLAColor returns the color with HSLA format

func HSLColor 

func HSLColor(h, s, l float32) string

HSLColor returns the color with HSL format

func RGBAColor 

func RGBAColor(r, g, b uint16, a float32) string

RGBAColor returns the color with RGBA format

func RGBColor 

func RGBColor(r, g, b uint16) string

RGBColor returns the color with RGB format

Types

type AngleAxis 

type AngleAxis struct {
	PolarAxisBase
	Clockwise bool `json:"clockwise,omitempty"`
}

type AreaStyle 

type AreaStyle struct {
	// Fill area color.
	Color string `json:"color,omitempty"`

	// Opacity of the component. Supports value from 0 to 1, and the component will not be drawn when set to 0.
	Opacity float32 `json:"opacity,omitempty"`
}

AreaStyle is the option set for an area style component.

type Assets 

type Assets struct {
	JSAssets  types.OrderedSet
	CSSAssets types.OrderedSet

	CustomizedJSAssets  types.OrderedSet
	CustomizedCSSAssets types.OrderedSet
}

AssetsOpts contains options for static assets.

func (*Assets) AddCustomizedCSSAssets 

func (opt *Assets) AddCustomizedCSSAssets(assets ...string)

AddCustomizedCSSAssets adds the customized css assets which will not be added the `host` prefix.

func (*Assets) AddCustomizedJSAssets 

func (opt *Assets) AddCustomizedJSAssets(assets ...string)

AddCustomizedJSAssets adds the customized javascript assets which will not be added the `host` prefix.

func (*Assets) InitAssets 

func (opt *Assets) InitAssets()

InitAssets inits the static assets storage.

func (*Assets) Validate 

func (opt *Assets) Validate(host string)

Validate validates the static assets configurations

type AxisLabel 

type AxisLabel struct {
	// Set this to false to prevent the axis label from appearing.
	Show bool `json:"show"`

	// Interval of Axis label, which is available in category axis.
	// It uses a strategy that labels do not overlap by default.
	// You may set it to be 0 to display all labels compulsively.
	// If it is set to be 1, it means that labels are shown once after one label.
	// And if it is set to be 2, it means labels are shown once after two labels, and so on.
	Interval string `json:"interval,omitempty"`

	// Set this to true so the axis labels face the inside direction.
	Inside bool `json:"inside,omitempty"`

	// Rotation degree of axis label, which is especially useful when there is no enough space for category axis.
	// Rotation degree is from -90 to 90.
	Rotate float64 `json:"rotate,omitempty"`

	// The margin between the axis label and the axis line.
	Margin float64 `json:"margin,omitempty"`

	// Formatter of axis label, which supports string template and callback function.
	//
	// Example:
	//
	// Use string template; template variable is the default label of axis {value}
	// formatter: '{value} kg'
	//
	// Use callback function; function parameters are axis index
	//
	//
	//  formatter: function (value, index) {
	//    // Formatted to be month/day; display year only in the first label
	//    var date = new Date(value);
	//    var texts = [(date.getMonth() + 1), date.getDate()];
	//    if (idx === 0) {
	//        texts.unshift(date.getYear());
	//    }
	//    return texts.join('/');
	//}
	Formatter string `json:"formatter,omitempty"`

	ShowMinLabel bool `json:"showMinLabel"`
	ShowMaxLabel bool `json:"showMaxLabel"`

	// Color of axis label is set to be axisLine.lineStyle.color by default. Callback function is supported,
	// in the following format:
	//
	// (val: string) => Color
	// Parameter is the text of label, and return value is the color. See the following example:
	//
	// textStyle: {
	//    color: function (value, index) {
	//        return value >= 0 ? 'green' : 'red';
	//    }
	// }
	Color string `json:"color,omitempty"`

	// axis label font style
	FontStyle string `json:"fontStyle,omitempty"`
	// axis label font weight
	FontWeight string `json:"fontWeight,omitempty"`
	// axis label font family
	FontFamily string `json:"fontFamily,omitempty"`
	// axis label font size
	FontSize string `json:"fontSize,omitempty"`
	// Horizontal alignment of axis label
	Align string `json:"align,omitempty"`
	// Vertical alignment of axis label
	VerticalAlign string `json:"verticalAlign,omitempty"`
	// Line height of the axis label
	LineHeight string `json:"lineHeight,omitempty"`
}

AxisLabel settings related to axis label. https://echarts.apache.org/en/option.html#xAxis.axisLabel

type AxisPointer 

type AxisPointer struct {

	// Indicator type.
	// Options:
	//   - 'line' line indicator.
	//   - 'shadow' shadow crosshair indicator.
	//   - 'none' no indicator displayed.
	//   - 'cross' crosshair indicator, which is actually the shortcut of enable two axisPointers of two orthometric axes.
	Type string `json:"type,omitempty"`

	// 	Whether snap to point automatically. The default value is auto determined.
	// This feature usually makes sense in value axis and time axis, where tiny points can be seeked automatically.
	Snap bool `json:"snap,omitempty"`

	Link AxisPointerLink `json:"link,omitempty"`
}

AxisPointer is the option set for an axisPointer component https://echarts.apache.org/en/option.html#axisPointer 

type AxisPointerLink struct {
	// can be 'all" or []int
	XAxisIndex interface{} `json:"xAxisIndex,omitempty"`
	YAxisName  string      `json:"yAxisName,omitempty"`
}

type AxisTick 

type AxisTick struct {
	Show bool `json:"show"`
}

type Bar3DChart 

type Bar3DChart struct {
	// Shading is the coloring effect of 3D graphics in 3D Bar.
	// The following three coloring methods are supported in echarts-gl:
	// Options:
	//
	// * "color": Only display colors, not affected by other factors such as lighting.
	// * "lambert": Through the classic [lambert] coloring, can express the light and dark that the light shows.
	// * "realistic": Realistic rendering, combined with light.ambientCubemap and postEffect,
	//   can improve the quality and texture of the display.
	//   [Physical Based Rendering (PBR)] (https://www.marmoset.co/posts/physically-based-rendering-and-you-can-too/)
	//   is used in ECharts GL to represent realistic materials.
	Shading string
}

Bar3DChart is the option set for a 3D bar chart.

type BarChart 

type BarChart struct {
	// Name of stack. On the same category axis, the series with the
	// same stack name would be put on top of each other.
	Stack string

	BarWidth string
	// The gap between bars between different series, is a percent value like '30%',
	// which means 30% of the bar width.
	// Set barGap as '-100%' can overlap bars that belong to different series,
	// which is useful when putting a series of bar as background.
	// In a single coordinate system, this attribute is shared by multiple 'bar' series.
	// This attribute should be set on the last 'bar' series in the coordinate system,
	// then it will be adopted by all 'bar' series in the coordinate system.
	BarGap string
	// The bar gap of a single series, defaults to be 20% of the category gap,
	// can be set as a fixed value.
	// In a single coordinate system, this attribute is shared by multiple 'bar' series.
	// This attribute should be set on the last 'bar' series in the coordinate system,
	// then it will be adopted by all 'bar' series in the coordinate system.
	BarCategoryGap string

	// Index of x axis to combine with, which is useful for multiple x axes in one chart.
	XAxisIndex int

	// Index of y axis to combine with, which is useful for multiple y axes in one chart.
	YAxisIndex int

	ShowBackground bool
	RoundCap       bool
	CoordSystem    string

	// zlevel value of all graphical elements in bar.
	ZLevel int
}

BarChart https://echarts.apache.org/en/option.html#series-bar

type BarData 

type BarData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`

	// The style setting of the text label in a single bar.
	Label *Label `json:"label,omitempty"`

	// ItemStyle settings in this series data.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`

	// Tooltip settings in this series data.
	Tooltip *Tooltip `json:"tooltip,omitempty"`
}

BarData https://echarts.apache.org/en/option.html#series-bar.data

type BoxPlotData 

type BoxPlotData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`

	// The style setting of the text label in a single bar.
	Label *Label `json:"label,omitempty"`

	// ItemStyle settings in this series data.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`

	// Emphasis settings in this series data.
	Emphasis *Emphasis `json:"emphasis,omitempty"`

	// Tooltip settings in this series data.
	Tooltip *Tooltip `json:"tooltip,omitempty"`
}

BoxPlotData https://echarts.apache.org/en/option.html#series-boxplot.data

type Chart3DData 

type Chart3DData struct {
	// Name of the data item.
	Name string `json:"name,omitempty"`

	// Value of the data item.
	// []interface{}{1, 2, 3}
	Value []interface{} `json:"value,omitempty"`

	// ItemStyle settings in this series data.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`

	// The style setting of the text label in a single bar.
	Label *Label `json:"label,omitempty"`
}

type Colors 

type Colors []string

type DataZoom 

type DataZoom struct {
	// Data zoom component of inside type, Options: "inside", "slider"
	Type string `json:"type" default:"inside"`

	// The start percentage of the window out of the data extent, in the range of 0 ~ 100.
	// default 0
	Start float32 `json:"start,omitempty"`

	// The end percentage of the window out of the data extent, in the range of 0 ~ 100.
	// default 100
	End float32 `json:"end,omitempty"`

	// Specify the frame rate of views refreshing, with unit millisecond (ms).
	// If animation set as true and animationDurationUpdate set as bigger than 0,
	// you can keep throttle as the default value 100 (or set it as a value bigger than 0),
	// otherwise it might be not smooth when dragging.
	// If animation set as false or animationDurationUpdate set as 0, and data size is not very large,
	// and it seems to be not smooth when dragging, you can set throttle as 0 to improve that.
	Throttle float32 `json:"throttle,omitempty"`

	// Specify which xAxis is/are controlled by the dataZoom-inside when Cartesian coordinate system is used.
	// By default the first xAxis that parallel to dataZoom are controlled when dataZoom-inside.
	// Orient is set as 'horizontal'. But it is recommended to specify it explicitly but not use default value.
	// If it is set as a single number, one axis is controlled, while if it is set as an Array ,
	// multiple axes are controlled.
	XAxisIndex interface{} `json:"xAxisIndex,omitempty"`

	// Specify which yAxis is/are controlled by the dataZoom-inside when Cartesian coordinate system is used.
	// By default the first yAxis that parallel to dataZoom are controlled when dataZoom-inside.
	// Orient is set as 'vertical'. But it is recommended to specify it explicitly but not use default value.
	// If it is set as a single number, one axis is controlled, while if it is set as an Array ,
	// multiple axes are controlled.
	YAxisIndex interface{} `json:"yAxisIndex,omitempty"`
}

DataZoom is the option set for a zoom component. dataZoom component is used for zooming a specific area, which enables user to investigate data in detail, or get an overview of the data, or get rid of outlier points. https://echarts.apache.org/en/option.html#dataZoom

type EffectScatterData 

type EffectScatterData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

EffectScatterData https://echarts.apache.org/en/option.html#series-effectScatter.data

type Emphasis 

type Emphasis struct {
	// the emphasis style of label
	Label *Label `json:"label,omitempty"`

	// the emphasis style of item
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`
}

Emphasis is the style when it is highlighted, like being hovered by mouse, or highlighted via legend connect.

type FunnelData 

type FunnelData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

FunnelData https://echarts.apache.org/en/option.html#series-funnel.data

type GaugeData 

type GaugeData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

GaugeData https://echarts.apache.org/en/option.html#series-gauge.data

type GeoComponent 

type GeoComponent struct {
	// Map charts.
	Map string `json:"map,omitempty"`

	// Graphic style of Map Area Border, emphasis is the style when it is highlighted,
	// like being hovered by mouse, or highlighted via legend connect.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`

	// Set this to true, to prevent interaction with the axis.
	Silent bool `json:"silent,omitempty"`
}

GeoComponent is the option set for geo component. https://echarts.apache.org/en/option.html#geo

type GeoData 

type GeoData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

GeoData

type GraphCategory 

type GraphCategory struct {
	// Name of category, which is used to correspond with legend and the content of tooltip.
	Name string `json:"name"`

	// The label style of node in this category.
	Label *Label `json:"label,omitempty"`
}

GraphCategory represents a category for data nodes. The categories of node, which is optional. If there is a classification of nodes, the category of each node can be assigned through data[i].category. And the style of category will also be applied to the style of nodes. categories can also be used in legend. https://echarts.apache.org/en/option.html#series-graph.categories

type GraphChart 

type GraphChart struct {
	// Graph layout.
	// * 'none' No layout, use x, y provided in node as the position of node.
	// * 'circular' Adopt circular layout, see the example Les Miserables.
	// * 'force' Adopt force-directed layout, see the example Force, the
	// detail about layout configurations are in graph.force
	Layout string

	// Force is the option set for graph force layout.
	Force *GraphForce

	// Whether to enable mouse zooming and translating. false by default.
	// If either zooming or translating is wanted, it can be set to 'scale' or 'move'.
	// Otherwise, set it to be true to enable both.
	Roam bool

	// Whether to focus/highlight the hover node and it's adjacencies.
	FocusNodeAdjacency bool

	// The categories of node, which is optional. If there is a classification of nodes,
	// the category of each node can be assigned through data[i].category.
	// And the style of category will also be applied to the style of nodes. categories can also be used in legend.
	Categories []*GraphCategory
}

GraphChart is the option set for graph chart. https://echarts.apache.org/en/option.html#series-graph

type GraphForce 

type GraphForce struct {
	// The initial layout before force-directed layout, which will influence on the result of force-directed layout.
	// It defaults not to do any layout and use x, y provided in node as the position of node.
	// If it doesn"t exist, the position will be generated randomly.
	// You can also use circular layout "circular".
	InitLayout string `json:"initLayout,omitempty"`

	// The repulsion factor between nodes. The repulsion will be stronger and the distance
	// between 2 nodes becomes further as this value becomes larger.
	// It can be an array to represent the range of repulsion. In this case larger value have larger
	// repulsion and smaller value will have smaller repulsion.
	Repulsion float32 `json:"repulsion,omitempty"`

	// The gravity factor enforcing nodes approach to the center. The nodes will be
	// closer to the center as the value becomes larger. default 0.1
	Gravity float32 `json:"gravity,omitempty"`

	// The distance between 2 nodes on edge. This distance is also affected by repulsion.
	// It can be an array to represent the range of edge length. In this case edge with larger
	// value will be shorter, which means two nodes are closer. And edge with smaller value will be longer.
	// default 30
	EdgeLength float32 `json:"edgeLength,omitempty"`
}

Configuration items about force-directed layout. Force-directed layout simulates spring/charge model, which will add a repulsion between 2 nodes and add a attraction between 2 nodes of each edge. In each iteration nodes will move under the effect of repulsion and attraction. After several iterations, the nodes will be static in a balanced position. As a result, the energy local minimum of this whole model will be realized. The result of force-directed layout has a good symmetries and clustering, which is also aesthetically pleasing. 

type GraphLink struct {
	// A string representing the name of source node on edge. Can also be a number representing the node index.
	Source interface{} `json:"source,omitempty"`

	// A string representing the name of target node on edge. Can also be a number representing node index.
	Target interface{} `json:"target,omitempty"`

	// value of edge, can be mapped to edge length in force graph.
	Value float32 `json:"value,omitempty"`
}

GraphLink represents relationship between two data nodes. https://echarts.apache.org/en/option.html#series-graph.links

type GraphNode 

type GraphNode struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// x value of node position.
	X float32 `json:"x,omitempty"`

	// y value of node position.
	Y float32 `json:"y,omitempty"`

	// Value of data item.
	Value float32 `json:"value,omitempty"`

	// If node are fixed when doing force directed layout.
	Fixed bool `json:"fixed,omitempty"`

	// Index of category which the data item belongs to.
	Category int `json:"category,omitempty"`

	// Symbol of node of this category.
	// Icon types provided by ECharts includes
	// 'circle', 'rect', 'roundRect', 'triangle', 'diamond', 'pin', 'arrow', 'none'
	// It can be set to an image with 'image://url' , in which URL is the link to an image, or dataURI of an image.
	Symbol string `json:"symbol,omitempty"`

	// node of this category symbol size. It can be set to single numbers like 10,
	// or use an array to represent width and height. For example, [20, 10] means symbol width is 20, and height is10.
	SymbolSize interface{} `json:"symbolSize,omitempty"`

	// The style of this node.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`
}

GraphNode represents a data node in graph chart. https://echarts.apache.org/en/option.html#series-graph.data

type Grid 

type Grid struct {
	// Distance between grid component and the left side of the container.
	// Left value can be instant pixel value like 20.
	// It can also be a percentage value relative to container width like '20%';
	// and it can also be 'left', 'center', or 'right'.
	// If the left value is set to be 'left', 'center', or 'right',
	// then the component will be aligned automatically based on position.
	Left string `json:"left,omitempty"`

	// Distance between grid component and the top side of the container.
	// Top value can be instant pixel value like 20.
	// It can also be a percentage value relative to container width like '20%'.
	// and it can also be 'top', 'middle', or 'bottom'.
	// If the left value is set to be 'top', 'middle', or 'bottom',
	// then the component will be aligned automatically based on position.
	Top string `json:"top,omitempty"`

	// Distance between grid component and the right side of the container.
	// Right value can be instant pixel value like 20.
	// It can also be a percentage value relative to container width like '20%'.
	Right string `json:"right,omitempty"`

	// Distance between grid component and the bottom side of the container.
	// Bottom value can be instant pixel value like 20.
	// It can also be a percentage value relative to container width like '20%'.
	Bottom string `json:"bottom,omitempty"`

	Height string `json:"height,omitempty"`
}

type Grid3D 

type Grid3D struct {
	// Whether to show the coordinate.
	Show bool `json:"show,omitempty"`

	// 3D Cartesian coordinates width
	// default 100
	BoxWidth float32 `json:"boxWidth,omitempty"`

	// 3D Cartesian coordinates height
	// default 100
	BoxHeight float32 `json:"boxHeight,omitempty"`

	// 3D Cartesian coordinates depth
	// default 100
	BoxDepth float32 `json:"boxDepth,omitempty"`

	// Rotate or scale fellows the mouse
	ViewControl *ViewControl `json:"viewControl,omitempty"`
}

Grid3D contains options for the 3D coordinate.

type HeatMapChart 

type HeatMapChart struct {
	// Index of x axis to combine with, which is useful for multiple x axes in one chart.
	XAxisIndex int

	// Index of y axis to combine with, which is useful for multiple y axes in one chart.
	YAxisIndex int
}

HeatMapChart is the option set for a heatmap chart. https://echarts.apache.org/en/option.html#series-heatmap

type HeatMapData 

type HeatMapData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

HeatMapData https://echarts.apache.org/en/option.html#series-heatmap.data

type Indicator 

type Indicator struct {
	// Indicator name
	Name string `json:"name,omitempty"`

	// The maximum value of indicator. It is an optional configuration, but we recommend to set it manually.
	Max float32 `json:"max,omitempty"`

	// The minimum value of indicator. It it an optional configuration, with default value of 0.
	Min float32 `json:"min,omitempty"`

	// Specify a color the the indicator.
	Color string `json:"color,omitempty"`
}

Indicator is the option set for a radar chart.

type Initialization 

type Initialization struct {
	// HTML title
	PageTitle string `default:""`

	// Width of canvas
	Width string `default:"900px"`

	// Height of canvas
	Height string `default:"500px"`

	// BackgroundColor of canvas
	BackgroundColor string

	// Chart unique ID
	ChartID string

	// Assets host
	AssetsHost string `default:"https://go-echarts.github.io/go-echarts-assets/assets/"`

	// Theme of chart
	Theme string `default:"white"`
}

Initialization contains options for the canvas.

func (*Initialization) Validate 

func (opt *Initialization) Validate()

Validate validates the initialization configurations.

type ItemStyle 

type ItemStyle struct {
	// Color of chart
	// Kline Up candle color
	Color string `json:"color,omitempty"`

	// Kline Down candle color
	Color0 string `json:"color0,omitempty"`

	// BorderColor is the hart border color
	// Kline  Up candle border color
	BorderColor string `json:"borderColor,omitempty"`

	// Kline Down candle border color
	BorderColor0 string `json:"borderColor0,omitempty"`

	// Opacity of the component. Supports value from 0 to 1, and the component will not be drawn when set to 0.
	Opacity float32 `json:"opacity,omitempty"`
}

ItemStyle

type JSFunctions 

type JSFunctions struct {
	Fns []template.JS
}

func (*JSFunctions) AddJSFuncs 

func (f *JSFunctions) AddJSFuncs(fn ...string)

AddJSFuncs adds a new JS function.

type KlineChart 

type KlineChart struct {
	// Name of stack. On the same category axis, the series with the
	// same stack name would be put on top of each other.
	Stack string

	BarWidth string

	// Index of x axis to combine with, which is useful for multiple x axes in one chart.
	XAxisIndex int

	// Index of y axis to combine with, which is useful for multiple y axes in one chart.
	YAxisIndex int
}

KlineChart https://echarts.apache.org/en/option.html#series-candlestick

type KlineData 

type KlineData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

KlineData https://echarts.apache.org/en/option.html#series-candlestick.data

type Label 

type Label struct {
	// Whether to show label.
	Show bool `json:"show"`

	// Color is the text color.
	// If set as "auto", the color will assigned as visual color, such as series color.
	Color           string `json:"color,omitempty"`
	BackgroundColor string `json:"backgroundColor,omitempty"`

	BorderColor string `json:"borderColor,omitempty"`
	BorderWidth int    `json:"borderWidth"`
	BorderType  string `json:"borderType,omitempty"`

	// Label position. Followings are the options:
	//
	// [x, y]
	// Use relative percentage, or absolute pixel values to represent position of label
	// relative to top-left corner of bounding box. For example:
	//
	// Absolute pixel values: position: [10, 10],
	// Relative percentage: position: ["50%", "50%"]
	//
	// "top"
	// "left"
	// "right"
	// "bottom"
	// "inside"
	// "insideLeft"
	// "insideRight"
	// "insideTop"
	// "insideBottom"
	// "insideTopLeft"
	// "insideBottomLeft"
	// "insideTopRight"
	// "insideBottomRight"
	Position string `json:"position,omitempty"`

	// Data label formatter, which supports string template and callback function.
	// In either form, \n is supported to represent a new line.
	// String template, Model variation includes:
	//
	// {a}: series name.
	// {b}: the name of a data item.
	// {c}: the value of a data item.
	// {@xxx}: the value of a dimension named"xxx", for example,{@product}refers the value of"product"` dimension.
	// {@[n]}: the value of a dimension at the index ofn, for example,{@[3]}` refers the value at dimensions[3].
	Formatter string `json:"formatter,omitempty"`
}

Label contains options for a label text. https://echarts.apache.org/en/option.html#series-line.label

type LabelLine 

type LabelLine struct {
	// Whether to show the label guide line.
	Show bool `json:"show"`
	// Whether to show the label guide line above the corresponding element.
	ShowAbove bool `json:"showAbove"`
	// The length of the second segment of guide line.
	Length2 float64 `json:"length2,omitempty"`
	// smoothness of guide line.
	Smooth bool `json:"smooth"`
	// Minimum turn angle between two segments of guide line
	MinTurnAngle float64 `json:"minTurnAngle,omitempty"`
	// The style of label line
	LineStyle *LineStyle `json:"lineStyle,omitempty"`
}

LabelLine Configuration of label guide line.

type Legend 

type Legend struct {
	// Whether to show the Legend, default true.
	Show bool `json:"show"`

	// Distance between legend component and the left side of the container.
	// left value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'; and it can also be 'left', 'center', or 'right'.
	// If the left value is set to be 'left', 'center', or 'right', then the component
	// will be aligned automatically based on position.
	Left string `json:"left,omitempty"`

	// Distance between legend component and the top side of the container.
	// top value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'; and it can also be 'top', 'middle', or 'bottom'.
	// If the left value is set to be 'top', 'middle', or 'bottom', then the component
	// will be aligned automatically based on position.
	Top string `json:"top,omitempty"`

	// Distance between legend component and the right side of the container.
	// right value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'.
	// Adaptive by default.
	Right string `json:"right,omitempty"`

	// Distance between legend component and the bottom side of the container.
	// bottom value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'.
	// Adaptive by default.
	Bottom string `json:"bottom,omitempty"`

	// Data array of legend. An array item is usually a name representing string.
	// set Data as []string{} if you wants to hide the legend.
	Data interface{} `json:"data,omitempty"`

	// The layout orientation of legend.
	// Options: 'horizontal', 'vertical'
	Orient string `json:"orient,omitempty"`

	// Legend color when not selected.
	InactiveColor string `json:"inactiveColor,omitempty"`

	// State table of selected legend.
	// example:
	// var selected = map[string]bool{}
	// selected["series1"] = true
	// selected["series2"] = false
	Selected map[string]bool `json:"selected,omitempty"`

	// Selected mode of legend, which controls whether series can be toggled displaying by clicking legends.
	// It is enabled by default, and you may set it to be false to disabled it.
	// Besides, it can be set to 'single' or 'multiple', for single selection and multiple selection.
	SelectedMode string `json:"selectedMode,omitempty"`

	// Legend space around content. The unit is px.
	// Default values for each position are 5.
	// And they can be set to different values with left, right, top, and bottom.
	// Examples:
	// 1. Set padding to be 5
	//    padding: 5
	// 2. Set the top and bottom paddings to be 5, and left and right paddings to be 10
	//    padding: [5, 10]
	// 3. Set each of the four paddings seperately
	//    padding: [
	//      5,  // up
	//      10, // right
	//      5,  // down
	//      10, // left
	//    ]
	Padding interface{} `json:"padding,omitempty"`

	// Image width of legend symbol.
	ItemWidth int `json:"itemWidth,omitempty"`

	// Image height of legend symbol.
	ItemHeight int `json:"itemHeight,omitempty"`

	// Legend X position, right/left/center
	X string `json:"x,omitempty"`

	// Legend Y position, right/left/center
	Y string `json:"y,omitempty"`

	// Width of legend component. Adaptive by default.
	Width string `json:"width,omitempty"`

	// Height of legend component. Adaptive by default.
	Height string `json:"height,omitempty"`

	// Legend marker and text aligning.
	// By default, it automatically calculates from component location and orientation.
	// When left value of this component is 'right' and orient is 'vertical', it would be aligned to 'right'.
	// Options: auto/left/right
	Align string `json:"align,omitempty"`

	// Legend text style.
	TextStyle *TextStyle `json:"textStyle,omitempty"`
}

Legend is the option set for a legend component. Legend component shows symbol, color and name of different series. You can click legends to toggle displaying series in the chart. https://echarts.apache.org/en/option.html#legend

type LineChart 

type LineChart struct {
	// If stack the value. On the same category axis, the series with the same stack name would be put on top of each other.
	// The effect of the below example could be seen through stack switching of toolbox on the top right corner:
	Stack string

	// Whether to show as smooth curve.
	// If is typed in boolean, then it means whether to enable smoothing. If is
	// typed in number, valued from 0 to 1, then it means smoothness. A smaller value makes it less smooth.
	Smooth bool

	// Whether to show as a step line. It can be true, false. Or 'start', 'middle', 'end'.
	// Which will configure the turn point of step line.
	Step bool

	// Index of x axis to combine with, which is useful for multiple x axes in one chart.
	XAxisIndex int

	// Index of y axis to combine with, which is useful for multiple y axes in one chart.
	YAxisIndex int

	// Whether to connect the line across null points.
	ConnectNulls bool

	// Symbol of line marker
	// Icon types provided by ECharts includes
	// 'circle', 'rect', 'roundRect', 'triangle', 'diamond', 'pin', 'arrow', 'none'
	Symbol string

	// Whether to show symbol. It would be shown during tooltip hover.
	ShowSymbol bool

	// zlevel value of all graphical elements in Line.
	ZLevel int
}

LineChart is the options set for a line chart. https://echarts.apache.org/en/option.html#series-line

type LineData 

type LineData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`

	// Symbol of single data.
	// Icon types provided by ECharts includes 'circle', 'rect', 'roundRect', 'triangle', 'diamond', 'pin', 'arrow', 'none'
	// It can be set to an image with 'image://url' , in which URL is the link to an image, or dataURI of an image.
	Symbol string `json:"symbol,omitempty"`

	// single data symbol size. It can be set to single numbers like 10, or
	// use an array to represent width and height. For example, [20, 10] means symbol width is 20, and height is10
	SymbolSize int `json:"symbolSize,omitempty"`

	// Index of x axis to combine with, which is useful for multiple x axes in one chart.
	XAxisIndex int

	// Index of y axis to combine with, which is useful for multiple y axes in one chart.
	YAxisIndex int
}

LineData https://echarts.apache.org/en/option.html#series-line.data

type LineStyle 

type LineStyle struct {
	// Line color
	Color string `json:"color,omitempty"`

	// Width of line. default 1
	Width float32 `json:"width,omitempty"`

	// Type of line，options: "solid", "dashed", "dotted". default "solid"
	Type string `json:"type,omitempty"`

	// Opacity of the component. Supports value from 0 to 1, and the component will not be drawn when set to 0.
	Opacity float32 `json:"opacity,omitempty"`

	// Curveness of edge. The values from 0 to 1 could be set.
	// it would be larger as the the value becomes larger. default 0
	Curveness float32 `json:"curveness,omitempty"`
}

LineStyle is the option set for a link style component.

type LiquidChart 

type LiquidChart struct {
	// Shape of single data.
	// Icon types provided by ECharts includes 'circle', 'rect', 'roundRect', 'triangle', 'diamond', 'pin', 'arrow', 'none'
	// It can be set to an image with 'image://url' , in which URL is the link to an image, or dataURI of an image.
	Shape string

	// Whether to show outline
	IsShowOutline bool

	// Whether to stop animation
	IsWaveAnimation bool
}

LiquidChart reference https://github.com/ecomfe/echarts-liquidfill

type LiquidData 

type LiquidData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

LiquidData reference https://github.com/ecomfe/echarts-liquidfill

type MapData 

type MapData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

MapData https://echarts.apache.org/en/option.html#series-map.data

type MarkLineNameCoordItem 

type MarkLineNameCoordItem struct {
	// Mark line name
	Name string `json:"name,omitempty"`

	// Mark line start coordinate
	Coordinate0 []interface{}

	// Mark line end coordinate
	Coordinate1 []interface{}

	// Works only when type is assigned.
	// It is used to state the dimension used to calculate maximum value or minimum value.
	// It may be the direct name of a dimension, like x,
	// or angle for line charts, or open, or close for candlestick charts.
	ValueDim string `json:"valueDim,omitempty"`
}

MarkLineNameCoordItem represents coordinates for a MarkLine.

type MarkLineNameTypeItem 

type MarkLineNameTypeItem struct {
	// Mark line name.
	Name string `json:"name,omitempty"`

	// Mark line type, options: "average", "min", "max".
	Type string `json:"type,omitempty"`

	// Works only when type is assigned.
	// It is used to state the dimension used to calculate maximum value or minimum value.
	// It may be the direct name of a dimension, like x,
	// or angle for line charts, or open, or close for candlestick charts.
	ValueDim string `json:"valueDim,omitempty"`
}

MarkLineNameTypeItem represents type for a MarkLine.

type MarkLineNameXAxisItem 

type MarkLineNameXAxisItem struct {
	// Mark line name
	Name string `json:"name,omitempty"`

	// X axis data
	XAxis interface{} `json:"xAxis,omitempty"`

	// Works only when type is assigned.
	// It is used to state the dimension used to calculate maximum value or minimum value.
	// It may be the direct name of a dimension, like x,
	// or angle for line charts, or open, or close for candlestick charts.
	ValueDim string `json:"valueDim,omitempty"`
}

MarkLineNameXAxisItem

type MarkLineNameYAxisItem 

type MarkLineNameYAxisItem struct {
	// Mark line name
	Name string `json:"name,omitempty"`

	// Y axis data
	YAxis interface{} `json:"yAxis,omitempty"`

	// Works only when type is assigned.
	// It is used to state the dimension used to calculate maximum value or minimum value.
	// It may be the direct name of a dimension, like x,
	// or angle for line charts, or open, or close for candlestick charts.
	ValueDim string `json:"valueDim,omitempty"`
}

MarkLineNameYAxisItem

type MarkLineStyle 

type MarkLineStyle struct {
	// Symbol type at the two ends of the mark line. It can be an array for two ends, or assigned separately.
	// Options: "circle", "rect", "roundRect", "triangle", "diamond", "pin", "arrow", "none"
	Symbol []string `json:"symbol,omitempty"`

	// Symbol size.
	SymbolSize float32 `json:"symbolSize,omitempty"`

	// Mark line text options.
	Label *Label `json:"label,omitempty"`

	// Mark line style
	LineStyle *LineStyle `json:"lineStyle,omitempty"`
}

MarkLineStyle contains styling options for a MarkLine.

type MarkLines 

type MarkLines struct {
	Data []interface{} `json:"data,omitempty"`
	MarkLineStyle
}

MarkLines represents a series of marklines.

type MarkPointNameCoordItem 

type MarkPointNameCoordItem struct {
	// Name of markpoint
	Name string `json:"name,omitempty"`

	Symbol     string `json:"symbol,omitempty"`
	SymbolSize int    `json:"symbolSize,omitempty"`

	// Mark point coordinate
	Coordinate []interface{} `json:"coord,omitempty"`

	// Value in mark point
	Value string `json:"value,omitempty"`

	// Works only when type is assigned.
	// It is used to state the dimension used to calculate maximum value or minimum value.
	// It may be the direct name of a dimension, like x,
	// or angle for line charts, or open, or close for candlestick charts.
	ValueDim string `json:"valueDim,omitempty"`

	// Mark point text options.
	Label *Label `json:"label,omitempty"`

	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`
}

MarkPointNameCoordItem represents coordinates for a MarkPoint.

type MarkPointNameTypeItem 

type MarkPointNameTypeItem struct {
	// Name of markpoint
	Name string `json:"name,omitempty"`

	// Mark point type, options: "average", "min", "max".
	Type string `json:"type,omitempty"`

	// Works only when type is assigned.
	// It is used to state the dimension used to calculate maximum value or minimum value.
	// It may be the direct name of a dimension, like x,
	// or angle for line charts, or open, or close for candlestick charts.
	ValueDim string `json:"valueDim,omitempty"`
}

MarkPointNameTypeItem represents type for a MarkPoint.

type MarkPointStyle 

type MarkPointStyle struct {
	// Symbol type at the two ends of the mark line. It can be an array for two ends, or assigned separately.
	// Options: "circle", "rect", "roundRect", "triangle", "diamond", "pin", "arrow", "none"
	Symbol []string `json:"symbol,omitempty"`

	// Symbol size.
	SymbolSize float32 `json:"symbolSize,omitempty"`

	// Mark point text options.
	Label *Label `json:"label,omitempty"`
}

MarkPointStyle contains styling options for a MarkPoint.

type MarkPoints 

type MarkPoints struct {
	Data []interface{} `json:"data,omitempty"`
	MarkPointStyle
}

MarkPoints represents a series of markpoints.

type ParallelAxis 

type ParallelAxis struct {
	// Dimension index of coordinate axis.
	Dim int `json:"dim,omitempty"`

	// Name of axis.
	Name string `json:"name,omitempty"`

	// The maximum value of axis.
	// It can be set to a special value 'dataMax' so that the minimum value on this axis is set to be the maximum label.
	// It will be automatically computed to make sure axis tick is equally distributed when not set.
	// In category axis, it can also be set as the ordinal number.
	Max interface{} `json:"max,omitempty"`

	// Compulsively set segmentation interval for axis.
	Inverse bool `json:"inverse,omitempty"`

	// Location of axis name. Options: "start", "middle", "center", "end"
	// default "end"
	NameLocation string `json:"nameLocation,omitempty"`

	// Type of axis.
	// Options：
	// "value"：Numerical axis, suitable for continuous data.
	// "category" Category axis, suitable for discrete category data. Category data can be auto retrieved from series.
	// "log"  Log axis, suitable for log data.
	Type string `json:"type,omitempty"`

	// Category data，works on (type: "category").
	Data interface{} `json:"data,omitempty"`
}

ParallelAxis is the option set for a parallel axis.

type ParallelComponent 

type ParallelComponent struct {
	// Distance between parallel component and the left side of the container.
	// Left value can be instant pixel value like 20.
	// It can also be a percentage value relative to container width like '20%';
	// and it can also be 'left', 'center', or 'right'.
	// If the left value is set to be 'left', 'center', or 'right',
	// then the component will be aligned automatically based on position.
	Left string `json:"left,omitempty"`

	// Distance between parallel component and the top side of the container.
	// Top value can be instant pixel value like 20.
	// It can also be a percentage value relative to container width like '20%'.
	// and it can also be 'top', 'middle', or 'bottom'.
	// If the left value is set to be 'top', 'middle', or 'bottom',
	// then the component will be aligned automatically based on position.
	Top string `json:"top,omitempty"`

	// Distance between parallel component and the right side of the container.
	// Right value can be instant pixel value like 20.
	// It can also be a percentage value relative to container width like '20%'.
	Right string `json:"right,omitempty"`

	// Distance between parallel component and the bottom side of the container.
	// Bottom value can be instant pixel value like 20.
	// It can also be a percentage value relative to container width like '20%'.
	Bottom string `json:"bottom,omitempty"`
}

ParallelComponent is the option set for parallel component.

type ParallelData 

type ParallelData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

ParallelData https://echarts.apache.org/en/option.html#series-parallel.data

type PieChart 

type PieChart struct {
	// Whether to show as Nightingale chart, which distinguishes data through radius. There are 2 optional modes:
	// * 'radius' Use central angle to show the percentage of data, radius to show data size.
	// * 'area' All the sectors will share the same central angle, the data size is shown only through radiuses.
	RoseType string

	// Center position of Pie chart, the first of which is the horizontal position, and the second is the vertical position.
	// Percentage is supported. When set in percentage, the item is relative to the container width,
	// and the second item to the height.
	//
	// Example:
	//
	// Set to absolute pixel values ->> center: [400, 300]
	// Set to relative percent ->> center: ['50%', '50%']
	Center interface{}

	// Radius of Pie chart. Value can be:
	// * number: Specify outside radius directly.
	// * string: For example, '20%', means that the outside radius is 20% of the viewport
	// size (the little one between width and height of the chart container).
	//
	// Array.<number|string>: The first item specifies the inside radius, and the
	// second item specifies the outside radius. Each item follows the definitions above.
	Radius interface{}
}

PieChart is the option set for a pie chart. https://echarts.apache.org/en/option.html#series-pie

type PieData 

type PieData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`

	// Whether the data item is selected.
	Selected bool `json:"selected,omitempty"`

	// The label configuration of a single sector.
	Label *Label `json:"label,omitempty"`

	// Graphic style of , emphasis is the style when it is highlighted, like being hovered by mouse, or highlighted via legend connect.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`

	// tooltip settings in this series data.
	Tooltip *Tooltip `json:"tooltip,omitempty"`
}

PieData https://echarts.apache.org/en/option.html#series-pie.data

type Polar 

type Polar struct {
	ID      string    `json:"id,omitempty"`
	Zlevel  int       `json:"zlevel,omitempty"`
	Z       int       `json:"z,omitempty"`
	Center  [2]string `json:"center,omitempty"`
	Radius  [2]string `json:"radius,omitempty"`
	Tooltip Tooltip   `json:"tooltip,omitempty"`
}

Polar Bar options

type PolarAxisBase 

type PolarAxisBase struct {
	ID           string  `json:"id,omitempty"`
	PolarIndex   int     `json:"polarIndex,omitempty"`
	StartAngle   float64 `json:"startAngle,omitempty"`
	Type         string  `json:"type,omitempty"`
	BoundaryGap  bool    `json:"boundaryGap,omitempty"`
	Min          float64 `json:"min,omitempty"`
	Max          float64 `json:"max,omitempty"`
	Scale        bool    `json:"scale,omitempty"`
	SplitNumber  int     `json:"splitNumber,omitempty"`
	MinInterval  float64 `json:"minInterval,omitempty"`
	MaxInterval  float64 `json:"maxInterval,omitempty"`
	Interval     float64 `json:"interval,omitempty"`
	LogBase      float64 `json:"logBase,omitempty"`
	Silent       bool    `json:"silent,omitempty"`
	TriggerEvent bool    `json:"triggerEvent,omitempty"`
}

type RadarComponent 

type RadarComponent struct {
	// Indicator of radar chart, which is used to assign multiple variables(dimensions) in radar chart.
	Indicator []*Indicator `json:"indicator,omitempty"`

	// Radar render type, in which 'polygon' and 'circle' are supported.
	Shape string `json:"shape,omitempty"`

	// Segments of indicator axis.
	// default 5
	SplitNumber int `json:"splitNumber,omitempty"`

	// Center position of , the first of which is the horizontal position, and the second is the vertical position.
	// Percentage is supported. When set in percentage, the item is relative to the container width and height.
	Center interface{} `json:"center,omitempty"`

	// Split area of axis in grid area.
	SplitArea *SplitArea `json:"splitArea,omitempty"`

	// Split line of axis in grid area.
	SplitLine *SplitLine `json:"splitLine,omitempty"`
}

RadarComponent is the option set for a radar component. https://echarts.apache.org/en/option.html#radar

type RadarData 

type RadarData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

RadarData https://echarts.apache.org/en/option.html#series-radar

type RadiusAxis 

type RadiusAxis struct {
	PolarAxisBase
	Name          string    `json:"name,omitempty"`
	NameLocation  string    `json:"nameLocation,omitempty"`
	NameTextStyle TextStyle `json:"nameTextStyle,omitempty"`
	NameGap       float64   `json:"nameGap,omitempty"`
	NameRadius    float64   `json:"nameRotate,omitempty"`
	Inverse       bool      `json:"inverse,omitempty"`
}

type RippleEffect 

type RippleEffect struct {
	// The period duration of animation, in seconds.
	// default 4(s)
	Period float32 `json:"period,omitempty"`

	// The maximum zooming scale of ripples in animation.
	// default 2.5
	Scale float32 `json:"scale,omitempty"`

	// The brush type for ripples. options: "stroke" and "fill".
	// default "fill"
	BrushType string `json:"brushType,omitempty"`
}

RippleEffect is the option set for the ripple effect. 

type SankeyLink struct {
	// The name of source node of edge
	Source interface{} `json:"source,omitempty"`

	// The name of target node of edge
	Target interface{} `json:"target,omitempty"`

	// The value of edge, which decides the width of edge.
	Value float32 `json:"value,omitempty"`
}

SankeyLink represents relationship between two data nodes. https://echarts.apache.org/en/option.html#series-sankey.links

type SankeyNode 

type SankeyNode struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value string `json:"value,omitempty"`

	// Depth of the node within the chart
	Depth *int `json:"depth,omitempty"`

	// ItemStyle settings in this series data.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`
}

SankeyNode represents a data node. https://echarts.apache.org/en/option.html#series-sankey.nodes

type ScatterChart 

type ScatterChart struct {
	// Index of x axis to combine with, which is useful for multiple x axes in one chart.
	XAxisIndex int

	// Index of x axis to combine with, which is useful for multiple y axes in one chart.
	YAxisIndex int
}

ScatterChart is the option set for a scatter chart. https://echarts.apache.org/en/option.html#series-scatter

type ScatterData 

type ScatterData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`

	// Symbol
	Symbol string `json:"symbol,omitempty"`

	// SymbolSize
	SymbolSize int `json:"symbolSize,omitempty"`

	// SymbolRotate
	SymbolRotate int `json:"symbolRotate,omitempty"`

	// Index of x axis to combine with, which is useful for multiple x axes in one chart.
	XAxisIndex int `json:"xAxisIndex,omitempty"`

	// Index of y axis to combine with, which is useful for multiple y axes in one chart.
	YAxisIndex int `json:"yAxisIndex,omitempty"`
}

ScatterData https://echarts.apache.org/en/option.html#series-scatter.data

type SingleAxis 

type SingleAxis struct {
	// The minimum value of axis.
	// It can be set to a special value 'dataMin' so that the minimum value on this axis is set to be the minimum label.
	// It will be automatically computed to make sure axis tick is equally distributed when not set.
	Min interface{} `json:"min,omitempty"`

	// The maximum value of axis.
	// It can be set to a special value 'dataMax' so that the minimum value on this axis is set to be the maximum label.
	// It will be automatically computed to make sure axis tick is equally distributed when not set.
	Max interface{} `json:"max,omitempty"`

	// Type of axis.
	// Option:
	// * 'value': Numerical axis, suitable for continuous data.
	// * 'category': Category axis, suitable for discrete category data.
	//   Category data can be auto retrieved from series.data or dataset.source,
	//   or can be specified via xAxis.data.
	// * 'time' Time axis, suitable for continuous time series data. As compared to value axis,
	//   it has a better formatting for time and a different tick calculation method. For example,
	//   it decides to use month, week, day or hour for tick based on the range of span.
	// * 'log' Log axis, suitable for log data.
	Type string `json:"type,omitempty"`

	// Distance between grid component and the left side of the container.
	// left value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'; and it can also be 'left', 'center', or 'right'.
	// If the left value is set to be 'left', 'center', or 'right',
	// then the component will be aligned automatically based on position.
	Left string `json:"left,omitempty"`

	// Distance between grid component and the right side of the container.
	//right value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'.
	Right string `json:"right,omitempty"`

	// Distance between grid component and the top side of the container.
	// top value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'; and it can also be 'top', 'middle', or 'bottom'.
	// If the left value is set to be 'top', 'middle', or 'bottom',
	// then the component will be aligned automatically based on position.
	Top string `json:"top,omitempty"`

	// Distance between grid component and the bottom side of the container.
	// bottom value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'.
	Bottom string `json:"bottom,omitempty"`
}

SingleAxis is the option set for single axis. https://echarts.apache.org/en/option.html#singleAxis

type SplitArea 

type SplitArea struct {
	// Set this to true to show the splitArea.
	Show bool `json:"show"`

	// Split area style.
	AreaStyle *AreaStyle `json:"areaStyle,omitempty"`
}

SplitArea is the option set for a split area.

type SplitLine 

type SplitLine struct {
	// Set this to true to show the splitLine.
	Show bool `json:"show"`

	// Split line style.
	LineStyle *LineStyle `json:"lineStyle,omitempty"`
}

SplitLine is the option set for a split line.

type SunBurstData 

type SunBurstData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`
	// Value of data item.
	Value float64 `json:"value,omitempty"`
	// sub item of data item
	Children []*SunBurstData `json:"children,omitempty"`
}

SunBurstData data

type SunburstChart 

type SunburstChart struct {
	// The action of clicking a sector
	NodeClick string `json:"nodeClick,omitempty"`
	// Sorting method that sectors use based on value
	Sort string `json:"sort,omitempty"`
	// If there is no name, whether need to render it.
	RenderLabelForZeroData bool `json:"renderLabelForZeroData"`
	// Selected mode
	SelectedMode bool `json:"selectedMode"`
	// Whether to enable animation.
	Animation bool `json:"animation"`
	// Whether to set graphic number threshold to animation
	AnimationThreshold int `json:"animationThreshold,omitempty"`
	// Duration of the first animation
	AnimationDuration int `json:"animationDuration,omitempty"`
	// Easing method used for the first animation
	AnimationEasing string `json:"animationEasing,omitempty"`
	// Delay before updating the first animation
	AnimationDelay int `json:"animationDelay,omitempty"`
	// Time for animation to complete
	AnimationDurationUpdate int `json:"animationDurationUpdate,omitempty"`
	// Easing method used for animation.
	AnimationEasingUpdate string `json:"animationEasingUpdate,omitempty"`
	// Delay before updating animation
	AnimationDelayUpdate int `json:"animationDelayUpdate,omitempty"`
}

SunburstChart https://echarts.apache.org/en/option.html#series-sunburst

type TextStyle 

type TextStyle struct {
	// Font color
	Color string `json:"color,omitempty"`

	// Font style
	// Options: 'normal', 'italic', 'oblique'
	FontStyle string `json:"fontStyle,omitempty"`

	// Font size
	FontSize int `json:"fontSize,omitempty"`

	// Font family the main title font family.
	// Options: "sans-serif", 'serif' , 'monospace', 'Arial', 'Courier New', 'Microsoft YaHei', ...
	FontFamily string `json:"fontFamily,omitempty"`

	// Padding title space around content.
	// The unit is px. Default values for each position are 5.
	// And they can be set to different values with left, right, top, and bottom.
	Padding interface{} `json:"padding,omitempty"`

	// compatible for WordCloud
	Normal *TextStyle `json:"normal,omitempty"`
}

TextStyle is the option set for a text style component.

type ThemeRiverData 

type ThemeRiverData struct {
	// the time attribute of time and theme.
	Date string `json:"date,omitempty"`

	// the value of an event or theme at a time point.
	Value float64 `json:"value,omitempty"`

	// the name of an event or theme.
	Name string `json:"name,omitempty"`
}

ThemeRiverData https://echarts.apache.org/en/option.html#series-themeRiver

func (ThemeRiverData) ToList 

func (trd ThemeRiverData) ToList() [3]interface{}

ToList converts the themeriver data to a list

type Title 

type Title struct {
	// The main title text, supporting \n for newlines.
	Title string `json:"text,omitempty"`

	// TextStyle of the main title.
	TitleStyle *TextStyle `json:"textStyle,omitempty"`

	// The hyper link of main title text.
	Link string `json:"link,omitempty"`

	// Subtitle text, supporting \n for newlines.
	Subtitle string `json:"subtext,omitempty"`

	// TextStyle of the sub title.
	SubtitleStyle *TextStyle `json:"subtextStyle,omitempty"`

	// The hyper link of sub title text.
	SubLink string `json:"sublink,omitempty"`

	// Open the hyper link of main title in specified tab.
	// options:
	// 'self' opening it in current tab
	// 'blank' opening it in a new tab
	Target string `json:"target,omitempty"`

	// Distance between title component and the top side of the container.
	// top value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'; and it can also be 'top', 'middle', or 'bottom'.
	// If the left value is set to be 'top', 'middle', or 'bottom',
	// then the component will be aligned automatically based on position.
	Top string `json:"top,omitempty"`

	// Distance between title component and the bottom side of the container.
	// bottom value can be instant pixel value like 20;
	// it can also be a percentage value relative to container width like '20%'.
	// Adaptive by default.
	Bottom string `json:"bottom,omitempty"`

	// Distance between title component and the left side of the container.
	// left value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'; and it can also be 'left', 'center', or 'right'.
	// If the left value is set to be 'left', 'center', or 'right',
	// then the component will be aligned automatically based on position.
	Left string `json:"left,omitempty"`

	// Distance between title component and the right side of the container.
	// right value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'.
	//Adaptive by default.
	Right string `json:"right,omitempty"`

	BackgroundColor string `json:"backgroundColor,omitempty"`
}

Title is the option set for a title component. https://echarts.apache.org/en/option.html#title

type ToolBoxFeature 

type ToolBoxFeature struct {
	// Save as image tool
	SaveAsImage *ToolBoxFeatureSaveAsImage `json:"saveAsImage,omitempty"`

	// Data area zooming, which only supports rectangular coordinate by now.
	DataZoom *ToolBoxFeatureDataZoom `json:"dataZoom,omitempty"`

	// Data view tool, which could display data in current chart and updates chart after being edited.
	DataView *ToolBoxFeatureDataView `json:"dataView,omitempty"`

	// Restore configuration item.
	Restore *ToolBoxFeatureRestore `json:"restore,omitempty"`
}

ToolBoxFeature is a feature component under toolbox. https://echarts.apache.org/en/option.html#toolbox

type ToolBoxFeatureDataView 

type ToolBoxFeatureDataView struct {
	// Whether to show the tool.
	Show bool `json:"show"`

	// title for the tool.
	Title string `json:"title,omitempty"`

	// There are 3 names in data view
	// you could set them like this: []string["data view", "turn off", "refresh"]
	Lang []string `json:"lang"`

	// Background color of the floating layer in data view.
	BackgroundColor string `json:"backgroundColor"`
}

ToolBoxFeatureDataView https://echarts.apache.org/en/option.html#toolbox.feature.dataView

type ToolBoxFeatureDataZoom 

type ToolBoxFeatureDataZoom struct {
	// Whether to show the tool.
	Show bool `json:"show"`

	// Restored and zoomed title text.
	// m["zoom"] = "area zooming"
	// m["back"] = "restore area zooming"
	Title map[string]string `json:"title"`
}

ToolBoxFeatureDataZoom https://echarts.apache.org/en/option.html#toolbox.feature.dataZoom

type ToolBoxFeatureRestore 

type ToolBoxFeatureRestore struct {
	// Whether to show the tool.
	Show bool `json:"show"`

	// title for the tool.
	Title string `json:"title,omitempty"`
}

ToolBoxFeatureRestore https://echarts.apache.org/en/option.html#toolbox.feature.restore

type ToolBoxFeatureSaveAsImage 

type ToolBoxFeatureSaveAsImage struct {
	// Whether to show the tool.
	Show bool `json:"show"`

	// toolbox.feature.saveAsImage. type = 'png'
	// File suffix of the image saved.
	// If the renderer is set to be 'canvas' when chart initialized (default), t
	// hen 'png' (default) and 'jpeg' are supported.
	// If the renderer is set to be 'svg' when when chart initialized, then only 'svg' is supported
	// for type ('svg' type is supported since v4.8.0).
	Type string `json:"png,omitempty"`

	// Name to save the image, whose default value is title.text.
	Name string `json:"name,omitempty"`

	// Title for the tool.
	Title string `json:"title,omitempty"`
}

ToolBoxFeatureSaveAsImage is the option for saving chart as image. https://echarts.apache.org/en/option.html#toolbox.feature.saveAsImage

type Toolbox 

type Toolbox struct {
	// Whether to show toolbox component.
	Show bool `json:"show"`

	// The layout orientation of toolbox's icon.
	// Options: 'horizontal','vertical'
	Orient string `json:"orient,omitempty"`

	// Distance between toolbox component and the left side of the container.
	// left value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'; and it can also be 'left', 'center', or 'right'.
	// If the left value is set to be 'left', 'center', or 'right', then the component
	// will be aligned automatically based on position.
	Left string `json:"left,omitempty"`

	// Distance between toolbox component and the top side of the container.
	// top value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'; and it can also be 'top', 'middle', or 'bottom'.
	// If the left value is set to be 'top', 'middle', or 'bottom', then the component
	// will be aligned automatically based on position.
	Top string `json:"top,omitempty"`

	// Distance between toolbox component and the right side of the container.
	// right value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'.
	// Adaptive by default.
	Right string `json:"right,omitempty"`

	// Distance between toolbox component and the bottom side of the container.
	// bottom value can be instant pixel value like 20; it can also be a percentage
	// value relative to container width like '20%'.
	// Adaptive by default.
	Bottom string `json:"bottom,omitempty"`

	// The configuration item for each tool.
	// Besides the tools we provide, user-defined toolbox is also supported.
	Feature *ToolBoxFeature `json:"feature,omitempty"`
}

Toolbox is the option set for a toolbox component. https://echarts.apache.org/en/option.html#toolbox

type Tooltip 

type Tooltip struct {
	// Whether to show the tooltip component, including tooltip floating layer and axisPointer.
	Show bool `json:"show"`

	// Type of triggering.
	// Options:
	// * 'item': Triggered by data item, which is mainly used for charts that
	//    don't have a category axis like scatter charts or pie charts.
	// * 'axis': Triggered by axes, which is mainly used for charts that have category axes,
	//    like bar charts or line charts.
	// * 'none': Trigger nothing.
	Trigger string `json:"trigger,omitempty"`

	// Conditions to trigger tooltip. Options:
	// * 'mousemove': Trigger when mouse moves.
	// * 'click': Trigger when mouse clicks.
	// * 'mousemove|click': Trigger when mouse clicks and moves.
	// * 'none': Do not triggered by 'mousemove' and 'click'. Tooltip can be triggered and hidden
	//    manually by calling action.tooltip.showTip and action.tooltip.hideTip.
	//    It can also be triggered by axisPointer.handle in this case.
	TriggerOn string `json:"triggerOn,omitempty"`

	// The content formatter of tooltip's floating layer which supports string template and callback function.
	//
	// 1. String template
	// The template variables are {a}, {b}, {c}, {d} and {e}, which stands for series name,
	// data name and data value and ect. When trigger is set to be 'axis', there may be data from multiple series.
	// In this time, series index can be refereed as {a0}, {a1}, or {a2}.
	// {a}, {b}, {c}, {d} have different meanings for different series types:
	//
	// * Line (area) charts, bar (column) charts, K charts: {a} for series name,
	//   {b} for category name, {c} for data value, {d} for none;
	// * Scatter (bubble) charts: {a} for series name, {b} for data name, {c} for data value, {d} for none;
	// * Map: {a} for series name, {b} for area name, {c} for merging data, {d} for none;
	// * Pie charts, gauge charts, funnel charts: {a} for series name, {b} for data item name,
	//   {c} for data value, {d} for percentage.
	//
	// 2. Callback function
	// The format of callback function:
	// (params: Object|Array, ticket: string, callback: (ticket: string, html: string)) => string
	// The first parameter params is the data that the formatter needs. Its format is shown as follows:
	// {
	//    componentType: 'series',
	//    // Series type
	//    seriesType: string,
	//    // Series index in option.series
	//    seriesIndex: number,
	//    // Series name
	//    seriesName: string,
	//    // Data name, or category name
	//    name: string,
	//    // Data index in input data array
	//    dataIndex: number,
	//    // Original data as input
	//    data: Object,
	//    // Value of data. In most series it is the same as data.
	//    // But in some series it is some part of the data (e.g., in map, radar)
	//    value: number|Array|Object,
	//    // encoding info of coordinate system
	//    // Key: coord, like ('x' 'y' 'radius' 'angle')
	//    // value: Must be an array, not null/undefined. Contain dimension indices, like:
	//    // {
	//    //     x: [2] // values on dimension index 2 are mapped to x axis.
	//    //     y: [0] // values on dimension index 0 are mapped to y axis.
	//    // }
	//    encode: Object,
	//    // dimension names list
	//    dimensionNames: Array<String>,
	//    // data dimension index, for example 0 or 1 or 2 ...
	//    // Only work in `radar` series.
	//    dimensionIndex: number,
	//    // Color of data
	//    color: string,
	//
	//    // the percentage of pie chart
	//    percent: number,
	// }
	Formatter string `json:"formatter,omitempty"`

	// Configuration item for axisPointer
	AxisPointer *AxisPointer `json:"axisPointer,omitempty"`

	// The position of the tooltip's floating layer, which would follow the position of mouse by default.
	Position string `json:"position"`
}

Tooltip is the option set for a tooltip component. https://echarts.apache.org/en/option.html#tooltip

type TreeChart 

type TreeChart struct {
	// The layout of the tree, which can be orthogonal and radial.
	// * 'orthogonal' refer to the horizontal and vertical direction.
	// * 'radial' refers to the view that the root node as the center and each layer of nodes as the ring.
	Layout string

	// The direction of the orthogonal layout in the tree diagram.
	// * 'from left to right' or 'LR'
	// * 'from right to left' or 'RL'
	// * 'from top to bottom' or 'TB'
	// * 'from bottom to top' or 'BT'
	Orient string `json:"orient,omitempty"`

	// Whether to enable mouse zooming and translating. false by default.
	// If either zooming or translating is wanted, it can be set to 'scale' or 'move'.
	// Otherwise, set it to be true to enable both.
	Roam bool `json:"roam"`

	// Subtree collapses and expands interaction, default true.
	ExpandAndCollapse bool `json:"expandAndCollapse,omitempty"`

	// The initial level (depth) of the tree. The root node is the 0th layer, then the first layer, the second layer, ... , until the leaf node.
	// This configuration item is primarily used in conjunction with collapsing and expansion interactions.
	// The purpose is to prevent the nodes from obscuring each other. If set as -1 or null or undefined, all nodes are expanded.
	InitialTreeDepth int `json:"initialTreeDepth,omitempty"`

	// The style setting of the text label in a single bar.
	Label *Label `json:"label,omitempty"`

	// Leaf node special configuration, the leaf node and non-leaf node label location is different.
	Leaves *TreeLeaves `json:"leaves,omitempty"`

	// Distance between tree component and the sides of the container.
	// value can be instant pixel value like 20;
	// It can also be a percentage value relative to container width like '20%';
	Left   string `json:"left,omitempty"`
	Right  string `json:"right,omitempty"`
	Top    string `json:"top,omitempty"`
	Bottom string `json:"bottom,omitempty"`
}

type TreeData 

type TreeData struct {
	// Name of the data item.
	Name string `json:"name,omitempty"`

	// Value of the data item.
	Value int `json:"value,omitempty"`

	Children []*TreeData `json:"children,omitempty"`

	// Symbol of node of this category.
	// Icon types provided by ECharts includes
	// 'circle', 'rect', 'roundRect', 'triangle', 'diamond', 'pin', 'arrow', 'none'
	// It can be set to an image with 'image://url' , in which URL is the link to an image, or dataURI of an image.
	Symbol string `json:"symbol,omitempty"`

	// node of this category symbol size. It can be set to single numbers like 10,
	// or use an array to represent width and height. For example, [20, 10] means symbol width is 20, and height is10.
	SymbolSize interface{} `json:"symbolSize,omitempty"`

	// If set as `true`, the node is collpased in the initialization.
	Collapsed bool `json:"collapsed,omitempty"`

	// LineStyle settings in this series data.
	LineStyle *LineStyle `json:"lineStyle,omitempty"`

	// ItemStyle settings in this series data.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`
}

type TreeLeaves 

type TreeLeaves struct {
	// The style setting of the text label in a single bar.
	Label *Label `json:"label,omitempty"`

	// LineStyle settings in this series data.
	LineStyle *LineStyle `json:"lineStyle,omitempty"`

	// ItemStyle settings in this series data.
	ItemStyle *ItemStyle `json:"itemStyle,omitempty"`

	// Emphasis settings in this series data.
	Emphasis *Emphasis `json:"emphasis,omitempty"`
}

Leaf node special configuration, the leaf node and non-leaf node label location is different.

type ViewControl 

type ViewControl struct {
	// Whether to rotate automatically.
	AutoRotate bool `json:"autoRotate,omitempty"`

	// Rotate Speed, (angle/s).
	// default 10
	AutoRotateSpeed float32 `json:"autoRotateSpeed,omitempty"`
}

ViewControl contains options for view controlling.

type VisualMap 

type VisualMap struct {
	// Mapping type.
	// Options: "continuous", "piecewise"
	Type string `json:"type,omitempty" default:"continuous"`

	// Whether show handles, which can be dragged to adjust "selected range".
	Calculable bool `json:"calculable"`

	// Specify the min dataValue for the visualMap component.
	// [visualMap.min, visualMax.max] make up the domain of visual mapping.
	Min float32 `json:"min,omitempty"`

	// Specify the max dataValue for the visualMap component.
	// [visualMap.min, visualMax.max] make up the domain of visual mapping.
	Max float32 `json:"max,omitempty"`

	// Specify selected range, that is, the dataValue corresponding to the two handles.
	Range []float32 `json:"range,omitempty"`

	// The label text on both ends, such as ['High', 'Low'].
	Text []string `json:"text,omitempty"`

	// Define visual channels that will mapped from dataValues that are in selected range.
	InRange *VisualMapInRange `json:"inRange,omitempty"`
}

VisualMap is a type of component for visual encoding, which maps the data to visual channels. https://echarts.apache.org/en/option.html#visualMap

type VisualMapInRange 

type VisualMapInRange struct {
	// Color
	Color []string `json:"color,omitempty"`

	// Symbol type at the two ends of the mark line. It can be an array for two ends, or assigned separately.
	// Options: "circle", "rect", "roundRect", "triangle", "diamond", "pin", "arrow", "none"
	Symbol string `json:"symbol,omitempty"`

	// Symbol size.
	SymbolSize float32 `json:"symbolSize,omitempty"`
}

VisualMapInRange is a visual map instance in a range.

type WordCloudChart 

type WordCloudChart struct {
	// Shape of WordCloud
	// Optional: "circle", "rect", "roundRect", "triangle", "diamond", "pin", "arrow"
	Shape string

	// range of font size
	SizeRange []float32

	// range of font rotation angle
	RotationRange []float32
}

WordCloudChart is the option set for a word cloud chart.

type WordCloudData 

type WordCloudData struct {
	// Name of data item.
	Name string `json:"name,omitempty"`

	// Value of a single data item.
	Value interface{} `json:"value,omitempty"`
}

WordCloudData

type XAxis 

type XAxis struct {
	// Name of axis.
	Name string `json:"name,omitempty"`

	// Type of axis.
	// Option:
	// * 'value': Numerical axis, suitable for continuous data.
	// * 'category': Category axis, suitable for discrete category data.
	//   Category data can be auto retrieved from series.data or dataset.source,
	//   or can be specified via xAxis.data.
	// * 'time' Time axis, suitable for continuous time series data. As compared to value axis,
	//   it has a better formatting for time and a different tick calculation method. For example,
	//   it decides to use month, week, day or hour for tick based on the range of span.
	// * 'log' Log axis, suitable for log data.
	Type string `json:"type,omitempty"`

	// Set this to false to prevent the axis from showing.
	Show bool `json:"show"`

	// Category data, available in type: 'category' axis.
	Data interface{} `json:"data,omitempty"`

	// Number of segments that the axis is split into. Note that this number serves only as a
	// recommendation, and the true segments may be adjusted based on readability.
	// This is unavailable for category axis.
	SplitNumber int `json:"splitNumber,omitempty"`

	// It is available only in numerical axis, i.e., type: 'value'.
	// It specifies whether not to contain zero position of axis compulsively.
	// When it is set to be true, the axis may not contain zero position,
	// which is useful in the scatter chart for both value axes.
	// This configuration item is unavailable when the min and max are set.
	Scale bool `json:"scale,omitempty"`

	// The minimum value of axis.
	// It can be set to a special value 'dataMin' so that the minimum value on this axis is set to be the minimum label.
	// It will be automatically computed to make sure axis tick is equally distributed when not set.
	Min interface{} `json:"min,omitempty"`

	// The maximum value of axis.
	// It can be set to a special value 'dataMax' so that the minimum value on this axis is set to be the maximum label.
	// It will be automatically computed to make sure axis tick is equally distributed when not set.
	Max interface{} `json:"max,omitempty"`

	// The index of grid which the x axis belongs to. Defaults to be in the first grid.
	// default 0
	GridIndex int `json:"gridIndex,omitempty"`

	// Split area of X axis in grid area.
	SplitArea *SplitArea `json:"splitArea,omitempty"`

	// Split line of X axis in grid area.
	SplitLine *SplitLine `json:"splitLine,omitempty"`

	// Settings related to axis label.
	AxisLabel *AxisLabel `json:"axisLabel,omitempty"`

	AxisTick *AxisTick `json:"axisTick,omitempty"`
}

XAxis is the option set for X axis. https://echarts.apache.org/en/option.html#xAxis

type XAxis3D 

type XAxis3D struct {
	// Whether to display the x-axis.
	Show bool `json:"show,omitempty"`

	// The name of the axis.
	Name string `json:"name,omitempty"`

	// The index of the grid3D component used by the axis. The default is to use the first grid3D component.
	Grid3DIndex int `json:"grid3DIndex,omitempty"`

	// The type of the axis.
	// Optional:
	// * 'value' The value axis. Suitable for continuous data.
	// * 'category' The category axis. Suitable for the discrete category data.
	//  For this type, the category data must be set through data.
	// * 'time' The timeline. Suitable for the continuous timing data. The time axis has a
	//  time format compared to the value axis, and the scale calculation is also different.
	//  For example, the scale of the month, week, day, and hour ranges can be determined according to the range of the span.
	// * 'log' Logarithmic axis. Suitable for the logarithmic data.
	Type string `json:"type,omitempty"`

	// The minimum value of axis.
	// It can be set to a special value 'dataMin' so that the minimum value on this axis is set to be the minimum label.
	// It will be automatically computed to make sure the axis tick is equally distributed when not set.
	// In the category axis, it can also be set as the ordinal number. For example,
	// if a category axis has data: ['categoryA', 'categoryB', 'categoryC'],
	// and the ordinal 2 represents 'categoryC'. Moreover, it can be set as a negative number, like -3.
	Min interface{} `json:"min,omitempty"`

	// The maximum value of the axis.
	// It can be set to a special value 'dataMax' so that the minimum value on this axis is set to be the maximum label.
	// It will be automatically computed to make sure the axis tick is equally distributed when not set.
	// In the category axis, it can also be set as the ordinal number. For example, if a category axis
	// has data: ['categoryA', 'categoryB', 'categoryC'], and the ordinal 2 represents 'categoryC'.
	// Moreover, it can be set as a negative number, like -3.
	Max interface{} `json:"max,omitempty"`

	// Category data, available in type: 'category' axis.
	// If type is specified as 'category', but axis.data is not specified, axis.data will be auto
	// collected from series.data. It brings convenience, but we should notice that axis.data provides
	// then value range of the 'category' axis. If it is auto collected from series.data,
	// Only the values appearing in series.data can be collected. For example,
	// if series.data is empty, nothing will be collected.
	Data interface{} `json:"data,omitempty"`
}

XAxis3D contains options for X axis in the 3D coordinate.

type YAxis 

type YAxis struct {
	// Name of axis.
	Name string `json:"name,omitempty"`

	// Type of axis.
	// Option:
	// * 'value': Numerical axis, suitable for continuous data.
	// * 'category': Category axis, suitable for discrete category data.
	//   Category data can be auto retrieved from series.data or dataset.source,
	//   or can be specified via xAxis.data.
	// * 'time' Time axis, suitable for continuous time series data. As compared to value axis,
	//   it has a better formatting for time and a different tick calculation method. For example,
	//   it decides to use month, week, day or hour for tick based on the range of span.
	// * 'log' Log axis, suitable for log data.
	Type string `json:"type,omitempty"`

	// Set this to false to prevent the axis from showing.
	Show bool `json:"show"`

	// Category data, available in type: 'category' axis.
	Data interface{} `json:"data,omitempty"`

	// Number of segments that the axis is split into. Note that this number serves only as a
	// recommendation, and the true segments may be adjusted based on readability.
	// This is unavailable for category axis.
	SplitNumber int `json:"splitNumber,omitempty"`

	// It is available only in numerical axis, i.e., type: 'value'.
	// It specifies whether not to contain zero position of axis compulsively.
	// When it is set to be true, the axis may not contain zero position,
	// which is useful in the scatter chart for both value axes.
	// This configuration item is unavailable when the min and max are set.
	Scale bool `json:"scale,omitempty"`

	// The minimum value of axis.
	// It can be set to a special value 'dataMin' so that the minimum value on this axis is set to be the minimum label.
	// It will be automatically computed to make sure axis tick is equally distributed when not set.
	Min interface{} `json:"min,omitempty"`

	// The maximum value of axis.
	// It can be set to a special value 'dataMax' so that the minimum value on this axis is set to be the maximum label.
	// It will be automatically computed to make sure axis tick is equally distributed when not set.
	Max interface{} `json:"max,omitempty"`

	// The index of grid which the Y axis belongs to. Defaults to be in the first grid.
	// default 0
	GridIndex int `json:"gridIndex,omitempty"`

	// Split area of Y axis in grid area.
	SplitArea *SplitArea `json:"splitArea,omitempty"`

	// Split line of Y axis in grid area.
	SplitLine *SplitLine `json:"splitLine,omitempty"`

	// Settings related to axis label.
	AxisLabel *AxisLabel `json:"axisLabel,omitempty"`
}

YAxis is the option set for Y axis. https://echarts.apache.org/en/option.html#yAxis

type YAxis3D 

type YAxis3D struct {
	// Whether to display the y-axis.
	Show bool `json:"show,omitempty"`

	// The name of the axis.
	Name string `json:"name,omitempty"`

	// The index of the grid3D component used by the axis. The default is to use the first grid3D component.
	Grid3DIndex int `json:"grid3DIndex,omitempty"`

	// The type of the axis.
	// Optional:
	// * 'value' The value axis. Suitable for continuous data.
	// * 'category' The category axis. Suitable for the discrete category data.
	//  For this type, the category data must be set through data.
	// * 'time' The timeline. Suitable for the continuous timing data. The time axis has a
	//  time format compared to the value axis, and the scale calculation is also different.
	//  For example, the scale of the month, week, day, and hour ranges can be determined according to the range of the span.
	// * 'log' Logarithmic axis. Suitable for the logarithmic data.
	Type string `json:"type,omitempty"`

	// The minimum value of axis.
	// It can be set to a special value 'dataMin' so that the minimum value on this axis is set to be the minimum label.
	// It will be automatically computed to make sure the axis tick is equally distributed when not set.
	// In the category axis, it can also be set as the ordinal number. For example,
	// if a category axis has data: ['categoryA', 'categoryB', 'categoryC'],
	// and the ordinal 2 represents 'categoryC'. Moreover, it can be set as a negative number, like -3.
	Min interface{} `json:"min,omitempty"`

	// The maximum value of the axis.
	// It can be set to a special value 'dataMax' so that the minimum value on this axis is set to be the maximum label.
	// It will be automatically computed to make sure the axis tick is equally distributed when not set.
	// In the category axis, it can also be set as the ordinal number. For example, if a category axis
	// has data: ['categoryA', 'categoryB', 'categoryC'], and the ordinal 2 represents 'categoryC'.
	// Moreover, it can be set as a negative number, like -3.
	Max interface{} `json:"max,omitempty"`

	// Category data, available in type: 'category' axis.
	// If type is specified as 'category', but axis.data is not specified, axis.data will be auto
	// collected from series.data. It brings convenience, but we should notice that axis.data provides
	// then value range of the 'category' axis. If it is auto collected from series.data,
	// Only the values appearing in series.data can be collected. For example,
	// if series.data is empty, nothing will be collected.
	Data interface{} `json:"data,omitempty"`
}

YAxis3D contains options for Y axis in the 3D coordinate.

type ZAxis3D 

type ZAxis3D struct {
	// Whether to display the z-axis.
	Show bool `json:"show,omitempty"`

	// The name of the axis.
	Name string `json:"name,omitempty"`

	// The index of the grid3D component used by the axis. The default is to use the first grid3D component.
	Grid3DIndex int `json:"grid3DIndex,omitempty"`

	// The type of the axis.
	// Optional:
	// * 'value' The value axis. Suitable for continuous data.
	// * 'category' The category axis. Suitable for the discrete category data.
	//  For this type, the category data must be set through data.
	// * 'time' The timeline. Suitable for the continuous timing data. The time axis has a
	//  time format compared to the value axis, and the scale calculation is also different.
	//  For example, the scale of the month, week, day, and hour ranges can be determined according to the range of the span.
	// * 'log' Logarithmic axis. Suitable for the logarithmic data.
	Type string `json:"type,omitempty"`

	// The minimum value of axis.
	// It can be set to a special value 'dataMin' so that the minimum value on this axis is set to be the minimum label.
	// It will be automatically computed to make sure the axis tick is equally distributed when not set.
	// In the category axis, it can also be set as the ordinal number. For example,
	// if a category axis has data: ['categoryA', 'categoryB', 'categoryC'],
	// and the ordinal 2 represents 'categoryC'. Moreover, it can be set as a negative number, like -3.
	Min interface{} `json:"min,omitempty"`

	// The maximum value of the axis.
	// It can be set to a special value 'dataMax' so that the minimum value on this axis is set to be the maximum label.
	// It will be automatically computed to make sure the axis tick is equally distributed when not set.
	// In the category axis, it can also be set as the ordinal number. For example, if a category axis
	// has data: ['categoryA', 'categoryB', 'categoryC'], and the ordinal 2 represents 'categoryC'.
	// Moreover, it can be set as a negative number, like -3.
	Max interface{} `json:"max,omitempty"`

	// Category data, available in type: 'category' axis.
	// If type is specified as 'category', but axis.data is not specified, axis.data will be auto
	// collected from series.data. It brings convenience, but we should notice that axis.data provides
	// then value range of the 'category' axis. If it is auto collected from series.data,
	// Only the values appearing in series.data can be collected. For example,
	// if series.data is empty, nothing will be collected.
	Data interface{} `json:"data,omitempty"`
}

ZAxis3D contains options for Z axis in the 3D coordinate.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.