gnmi

README

gNMI (gRPC Network Management Interface) Input Plugin

This plugin consumes telemetry data based on the gNMI Subscribe method. TLS is supported for authentication and encryption. This input plugin is vendor-agnostic and is supported on any platform that supports the gNMI spec.

For Cisco devices:

It has been optimized to support gNMI telemetry as produced by Cisco IOS XR (64-bit) version 6.5.1, Cisco NX-OS 9.3 and Cisco IOS XE 16.12 and later.

Global configuration options

In addition to the plugin-specific configuration settings, plugins support additional global and plugin configuration settings. These settings are used to modify metrics, tags, and field or create aliases and configure ordering, etc. See the CONFIGURATION.md for more details.

Configuration

# gNMI telemetry input plugin
[[inputs.gnmi]]
  ## Address and port of the gNMI GRPC server
  addresses = ["10.49.234.114:57777"]

  ## define credentials
  username = "cisco"
  password = "cisco"

  ## gNMI encoding requested (one of: "proto", "json", "json_ietf", "bytes")
  # encoding = "proto"

  ## redial in case of failures after
  redial = "10s"

  ## enable client-side TLS and define CA to authenticate the device
  # enable_tls = false
  # tls_ca = "/etc/telegraf/ca.pem"
  ## Minimal TLS version to accept by the client
  # tls_min_version = "TLS12"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = true

  ## define client-side TLS certificate & key to authenticate to the device
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"

  ## gNMI subscription prefix (optional, can usually be left empty)
  ## See: https://github.com/openconfig/reference/blob/master/rpc/gnmi/gnmi-specification.md#222-paths
  # origin = ""
  # prefix = ""
  # target = ""

  ## Define additional aliases to map encoding paths to measurement names
  # [inputs.gnmi.aliases]
  #   ifcounters = "openconfig:/interfaces/interface/state/counters"

  [[inputs.gnmi.subscription]]
    ## Name of the measurement that will be emitted
    name = "ifcounters"

    ## Origin and path of the subscription
    ## See: https://github.com/openconfig/reference/blob/master/rpc/gnmi/gnmi-specification.md#222-paths
    ##
    ## origin usually refers to a (YANG) data model implemented by the device
    ## and path to a specific substructure inside it that should be subscribed
    ## to (similar to an XPath). YANG models can be found e.g. here:
    ## https://github.com/YangModels/yang/tree/master/vendor/cisco/xr
    origin = "openconfig-interfaces"
    path = "/interfaces/interface/state/counters"

    ## Subscription mode ("target_defined", "sample", "on_change") and interval
    subscription_mode = "sample"
    sample_interval = "10s"

    ## Suppress redundant transmissions when measured values are unchanged
    # suppress_redundant = false

    ## If suppression is enabled, send updates at least every X seconds anyway
    # heartbeat_interval = "60s"

  ## Tag subscriptions are applied as tags to other subscriptions.
  # [[inputs.gnmi.tag_subscription]]
  #  ## When applying this value as a tag to other metrics, use this tag name
  #  name = "descr"
  #
  #  ## All other subscription fields are as normal
  #  origin = "openconfig-interfaces"
  #  path = "/interfaces/interface/state"
  #  subscription_mode = "on_change"
  #
  #  ## Match strategy to use for the tag.
  #  ## Tags are only applied for metrics of the same address. The following
  #  ## settings are valid:
  #  ##   unconditional -- always match
  #  ##   name          -- match by the "name" key
  #  ##                    This resembles the previsou 'tag-only' behavior.
  #  ##   elements      -- match by the keys in the path filtered by the path
  #  ##                    parts specified `elements` below
  #  ## By default, 'elements' is used if the 'elements' option is provided,
  #  ## otherwise match by 'name'.
  #  # match = ""
  #
  #  ## For the 'elements' match strategy, at least one path-element name must
  #  ## be supplied containing at least one key to match on. Multiple path
  #  ## elements can be specified in any order. All given keys must be equal
  #  ## for a match.
  #  # elements = ["description", "interface"]

Metrics

Each configured subscription will emit a different measurement. Each leaf in a GNMI SubscribeResponse Update message will produce a field reading in the measurement. GNMI PathElement keys for leaves will attach tags to the field(s).

Example Output

ifcounters,path=openconfig-interfaces:/interfaces/interface/state/counters,host=linux,name=MgmtEth0/RP0/CPU0/0,source=10.49.234.115,descr/description=Foo in-multicast-pkts=0i,out-multicast-pkts=0i,out-errors=0i,out-discards=0i,in-broadcast-pkts=0i,out-broadcast-pkts=0i,in-discards=0i,in-unknown-protos=0i,in-errors=0i,out-unicast-pkts=0i,in-octets=0i,out-octets=0i,last-clear="2019-05-22T16:53:21Z",in-unicast-pkts=0i 1559145777425000000
ifcounters,path=openconfig-interfaces:/interfaces/interface/state/counters,host=linux,name=GigabitEthernet0/0/0/0,source=10.49.234.115,descr/description=Bar out-multicast-pkts=0i,out-broadcast-pkts=0i,in-errors=0i,out-errors=0i,in-discards=0i,out-octets=0i,in-unknown-protos=0i,in-unicast-pkts=0i,in-octets=0i,in-multicast-pkts=0i,in-broadcast-pkts=0i,last-clear="2019-05-22T16:54:50Z",out-unicast-pkts=0i,out-discards=0i 1559145777425000000

Documentation

Index

• func New() telegraf.Input
• type GNMI
  • func (c *GNMI) Gather(_ telegraf.Accumulator) error
  • func (*GNMI) SampleConfig() string
  • func (c *GNMI) Start(acc telegraf.Accumulator) error
  • func (c *GNMI) Stop()
• type Subscription
• type TagSubscription

Functions

func New

func New() telegraf.Input

Types

type GNMI

type GNMI struct {
	Addresses        []string          `toml:"addresses"`
	Subscriptions    []Subscription    `toml:"subscription"`
	TagSubscriptions []TagSubscription `toml:"tag_subscription"`
	Aliases          map[string]string `toml:"aliases"`
	Encoding         string            `toml:"encoding"`
	Origin           string            `toml:"origin"`
	Prefix           string            `toml:"prefix"`
	Target           string            `toml:"target"`
	UpdatesOnly      bool              `toml:"updates_only"`
	Username         string            `toml:"username"`
	Password         string            `toml:"password"`
	Redial           config.Duration   `toml:"redial"`
	Trace            bool              `toml:"dump_responses"`
	EnableTLS        bool              `toml:"enable_tls"`
	Log              telegraf.Logger   `toml:"-"`
	internaltls.ClientConfig
	// contains filtered or unexported fields
}

gNMI plugin instance

func (*GNMI) Gather

func (c *GNMI) Gather(_ telegraf.Accumulator) error

Gather plugin measurements (unused)

func (*GNMI) SampleConfig

func (*GNMI) SampleConfig() string

func (*GNMI) Start

func (c *GNMI) Start(acc telegraf.Accumulator) error

Start the http listener service

func (*GNMI) Stop

func (c *GNMI) Stop()

Stop listener and cleanup

type Subscription

type Subscription struct {
	Name   string
	Origin string
	Path   string

	// Subscription mode and interval
	SubscriptionMode string          `toml:"subscription_mode"`
	SampleInterval   config.Duration `toml:"sample_interval"`

	// Duplicate suppression
	SuppressRedundant bool            `toml:"suppress_redundant"`
	HeartbeatInterval config.Duration `toml:"heartbeat_interval"`

	// Mark this subscription as a tag-only lookup source, not emitting any metric
	TagOnly bool `toml:"tag_only" deprecated:"1.25.0;2.0.0;please use 'tag_subscription's instead"`
	// contains filtered or unexported fields
}

Subscription for a gNMI client

type TagSubscription

type TagSubscription struct {
	Subscription
	Match    string `toml:"match"`
	Elements []string
}

Tag Subscription for a gNMI client