api

package
v0.5.1 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: May 13, 2015 License: MPL-2.0 Imports: 15 Imported by: 0

README

Consul API client

This package provides the api package which attempts to provide programmatic access to the full Consul API.

Currently, all of the Consul APIs included in version 0.3 are supported.

Documentation

The full documentation is available on Godoc

Usage

Below is an example of using the Consul client:

// Get a new client, with KV endpoints
client, _ := api.NewClient(api.DefaultConfig())
kv := client.KV()

// PUT a new KV pair
p := &api.KVPair{Key: "foo", Value: []byte("test")}
_, err := kv.Put(p, nil)
if err != nil {
    panic(err)
}

// Lookup the pair
pair, _, err := kv.Get("foo", nil)
if err != nil {
    panic(err)
}
fmt.Printf("KV: %v", pair)

Documentation

Index

Constants

View Source
const (
	// ACLCLientType is the client type token
	ACLClientType = "client"

	// ACLManagementType is the management type token
	ACLManagementType = "management"
)
View Source
const (
	// DefaultLockSessionName is the Session Name we assign if none is provided
	DefaultLockSessionName = "Consul API Lock"

	// DefaultLockSessionTTL is the default session TTL if no Session is provided
	// when creating a new Lock. This is used because we do not have another
	// other check to depend upon.
	DefaultLockSessionTTL = "15s"

	// DefaultLockWaitTime is how long we block for at a time to check if lock
	// acquisition is possible. This affects the minimum time it takes to cancel
	// a Lock acquisition.
	DefaultLockWaitTime = 15 * time.Second

	// DefaultLockRetryTime is how long we wait after a failed lock acquisition
	// before attempting to do the lock again. This is so that once a lock-delay
	// is in affect, we do not hot loop retrying the acquisition.
	DefaultLockRetryTime = 5 * time.Second

	// LockFlagValue is a magic flag we set to indicate a key
	// is being used for a lock. It is used to detect a potential
	// conflict with a semaphore.
	LockFlagValue = 0x2ddccbc058a50c18
)
View Source
const (
	// DefaultSemaphoreSessionName is the Session Name we assign if none is provided
	DefaultSemaphoreSessionName = "Consul API Semaphore"

	// DefaultSemaphoreSessionTTL is the default session TTL if no Session is provided
	// when creating a new Semaphore. This is used because we do not have another
	// other check to depend upon.
	DefaultSemaphoreSessionTTL = "15s"

	// DefaultSemaphoreWaitTime is how long we block for at a time to check if semaphore
	// acquisition is possible. This affects the minimum time it takes to cancel
	// a Semaphore acquisition.
	DefaultSemaphoreWaitTime = 15 * time.Second

	// DefaultSemaphoreRetryTime is how long we wait after a failed lock acquisition
	// before attempting to do the lock again. This is so that once a lock-delay
	// is in affect, we do not hot loop retrying the acquisition.
	DefaultSemaphoreRetryTime = 5 * time.Second

	// DefaultSemaphoreKey is the key used within the prefix to
	// use for coordination between all the contenders.
	DefaultSemaphoreKey = ".lock"

	// SemaphoreFlagValue is a magic flag we set to indicate a key
	// is being used for a semaphore. It is used to detect a potential
	// conflict with a lock.
	SemaphoreFlagValue = 0xe0f69a2baa414de0
)
View Source
const (
	// SessionBehaviorRelease is the default behavior and causes
	// all associated locks to be released on session invalidation.
	SessionBehaviorRelease = "release"

	// SessionBehaviorDelete is new in Consul 0.5 and changes the
	// behavior to delete all associated locks on session invalidation.
	// It can be used in a way similar to Ephemeral Nodes in ZooKeeper.
	SessionBehaviorDelete = "delete"
)

Variables

View Source
var (
	// ErrLockHeld is returned if we attempt to double lock
	ErrLockHeld = fmt.Errorf("Lock already held")

	// ErrLockNotHeld is returned if we attempt to unlock a lock
	// that we do not hold.
	ErrLockNotHeld = fmt.Errorf("Lock not held")

	// ErrLockInUse is returned if we attempt to destroy a lock
	// that is in use.
	ErrLockInUse = fmt.Errorf("Lock in use")

	// ErrLockConflict is returned if the flags on a key
	// used for a lock do not match expectation
	ErrLockConflict = fmt.Errorf("Existing key does not match lock use")
)
View Source
var (
	// ErrSemaphoreHeld is returned if we attempt to double lock
	ErrSemaphoreHeld = fmt.Errorf("Semaphore already held")

	// ErrSemaphoreNotHeld is returned if we attempt to unlock a semaphore
	// that we do not hold.
	ErrSemaphoreNotHeld = fmt.Errorf("Semaphore not held")

	// ErrSemaphoreInUse is returned if we attempt to destroy a semaphore
	// that is in use.
	ErrSemaphoreInUse = fmt.Errorf("Semaphore in use")

	// ErrSemaphoreConflict is returned if the flags on a key
	// used for a semaphore do not match expectation
	ErrSemaphoreConflict = fmt.Errorf("Existing key does not match semaphore use")
)

Functions

This section is empty.

Types

type ACL

type ACL struct {
	// contains filtered or unexported fields
}

ACL can be used to query the ACL endpoints

func (*ACL) Clone

func (a *ACL) Clone(id string, q *WriteOptions) (string, *WriteMeta, error)

Clone is used to return a new token cloned from an existing one

func (*ACL) Create

func (a *ACL) Create(acl *ACLEntry, q *WriteOptions) (string, *WriteMeta, error)

Create is used to generate a new token with the given parameters

func (*ACL) Destroy

func (a *ACL) Destroy(id string, q *WriteOptions) (*WriteMeta, error)

Destroy is used to destroy a given ACL token ID

func (*ACL) Info

func (a *ACL) Info(id string, q *QueryOptions) (*ACLEntry, *QueryMeta, error)

Info is used to query for information about an ACL token

func (*ACL) List

func (a *ACL) List(q *QueryOptions) ([]*ACLEntry, *QueryMeta, error)

List is used to get all the ACL tokens

func (*ACL) Update

func (a *ACL) Update(acl *ACLEntry, q *WriteOptions) (*WriteMeta, error)

Update is used to update the rules of an existing token

type ACLEntry

type ACLEntry struct {
	CreateIndex uint64
	ModifyIndex uint64
	ID          string
	Name        string
	Type        string
	Rules       string
}

ACLEntry is used to represent an ACL entry

type Agent

type Agent struct {
	// contains filtered or unexported fields
}

Agent can be used to query the Agent endpoints

func (*Agent) CheckDeregister

func (a *Agent) CheckDeregister(checkID string) error

CheckDeregister is used to deregister a check with the local agent

func (*Agent) CheckRegister

func (a *Agent) CheckRegister(check *AgentCheckRegistration) error

CheckRegister is used to register a new check with the local agent

func (*Agent) Checks

func (a *Agent) Checks() (map[string]*AgentCheck, error)

Checks returns the locally registered checks

func (*Agent) DisableNodeMaintenance

func (a *Agent) DisableNodeMaintenance() error

DisableNodeMaintenance toggles node maintenance mode off for the agent we are connected to.

func (*Agent) DisableServiceMaintenance

func (a *Agent) DisableServiceMaintenance(serviceID string) error

DisableServiceMaintenance toggles service maintenance mode off for the given service ID.

func (*Agent) EnableNodeMaintenance

func (a *Agent) EnableNodeMaintenance(reason string) error

EnableNodeMaintenance toggles node maintenance mode on for the agent we are connected to.

func (*Agent) EnableServiceMaintenance

func (a *Agent) EnableServiceMaintenance(serviceID, reason string) error

EnableServiceMaintenance toggles service maintenance mode on for the given service ID.

func (*Agent) FailTTL

func (a *Agent) FailTTL(checkID, note string) error

FailTTL is used to set a TTL check to the failing state

func (*Agent) ForceLeave

func (a *Agent) ForceLeave(node string) error

ForceLeave is used to have the agent eject a failed node

func (*Agent) Join

func (a *Agent) Join(addr string, wan bool) error

Join is used to instruct the agent to attempt a join to another cluster member

func (*Agent) Members

func (a *Agent) Members(wan bool) ([]*AgentMember, error)

Members returns the known gossip members. The WAN flag can be used to query a server for WAN members.

func (*Agent) NodeName

func (a *Agent) NodeName() (string, error)

NodeName is used to get the node name of the agent

func (*Agent) PassTTL

func (a *Agent) PassTTL(checkID, note string) error

PassTTL is used to set a TTL check to the passing state

func (*Agent) Self

func (a *Agent) Self() (map[string]map[string]interface{}, error)

Self is used to query the agent we are speaking to for information about itself

func (*Agent) ServiceDeregister

func (a *Agent) ServiceDeregister(serviceID string) error

ServiceDeregister is used to deregister a service with the local agent

func (*Agent) ServiceRegister

func (a *Agent) ServiceRegister(service *AgentServiceRegistration) error

ServiceRegister is used to register a new service with the local agent

func (*Agent) Services

func (a *Agent) Services() (map[string]*AgentService, error)

Services returns the locally registered services

func (*Agent) UpdateTTL

func (a *Agent) UpdateTTL(checkID, note, status string) error

UpdateTTL is used to update the TTL of a check

func (*Agent) WarnTTL

func (a *Agent) WarnTTL(checkID, note string) error

WarnTTL is used to set a TTL check to the warning state

type AgentCheck

type AgentCheck struct {
	Node        string
	CheckID     string
	Name        string
	Status      string
	Notes       string
	Output      string
	ServiceID   string
	ServiceName string
}

AgentCheck represents a check known to the agent

type AgentCheckRegistration

type AgentCheckRegistration struct {
	ID        string `json:",omitempty"`
	Name      string `json:",omitempty"`
	Notes     string `json:",omitempty"`
	ServiceID string `json:",omitempty"`
	AgentServiceCheck
}

AgentCheckRegistration is used to register a new check

type AgentMember

type AgentMember struct {
	Name        string
	Addr        string
	Port        uint16
	Tags        map[string]string
	Status      int
	ProtocolMin uint8
	ProtocolMax uint8
	ProtocolCur uint8
	DelegateMin uint8
	DelegateMax uint8
	DelegateCur uint8
}

AgentMember represents a cluster member known to the agent

type AgentService

type AgentService struct {
	ID      string
	Service string
	Tags    []string
	Port    int
	Address string
}

AgentService represents a service known to the agent

type AgentServiceCheck

type AgentServiceCheck struct {
	Script   string `json:",omitempty"`
	Interval string `json:",omitempty"`
	Timeout  string `json:",omitempty"`
	TTL      string `json:",omitempty"`
	HTTP     string `json:",omitempty"`
	Status   string `json:",omitempty"`
}

AgentServiceCheck is used to create an associated check for a service

type AgentServiceChecks

type AgentServiceChecks []*AgentServiceCheck

type AgentServiceRegistration

type AgentServiceRegistration struct {
	ID      string   `json:",omitempty"`
	Name    string   `json:",omitempty"`
	Tags    []string `json:",omitempty"`
	Port    int      `json:",omitempty"`
	Address string   `json:",omitempty"`
	Check   *AgentServiceCheck
	Checks  AgentServiceChecks
}

AgentServiceRegistration is used to register a new service

type Catalog

type Catalog struct {
	// contains filtered or unexported fields
}

Catalog can be used to query the Catalog endpoints

func (*Catalog) Datacenters

func (c *Catalog) Datacenters() ([]string, error)

Datacenters is used to query for all the known datacenters

func (*Catalog) Deregister

func (c *Catalog) Deregister(dereg *CatalogDeregistration, q *WriteOptions) (*WriteMeta, error)

func (*Catalog) Node

func (c *Catalog) Node(node string, q *QueryOptions) (*CatalogNode, *QueryMeta, error)

Node is used to query for service information about a single node

func (*Catalog) Nodes

func (c *Catalog) Nodes(q *QueryOptions) ([]*Node, *QueryMeta, error)

Nodes is used to query all the known nodes

func (*Catalog) Register

func (c *Catalog) Register(reg *CatalogRegistration, q *WriteOptions) (*WriteMeta, error)

func (*Catalog) Service

func (c *Catalog) Service(service, tag string, q *QueryOptions) ([]*CatalogService, *QueryMeta, error)

Service is used to query catalog entries for a given service

func (*Catalog) Services

func (c *Catalog) Services(q *QueryOptions) (map[string][]string, *QueryMeta, error)

Services is used to query for all known services

type CatalogDeregistration

type CatalogDeregistration struct {
	Node       string
	Address    string
	Datacenter string
	ServiceID  string
	CheckID    string
}

type CatalogNode

type CatalogNode struct {
	Node     *Node
	Services map[string]*AgentService
}

type CatalogRegistration

type CatalogRegistration struct {
	Node       string
	Address    string
	Datacenter string
	Service    *AgentService
	Check      *AgentCheck
}

type CatalogService

type CatalogService struct {
	Node           string
	Address        string
	ServiceID      string
	ServiceName    string
	ServiceAddress string
	ServiceTags    []string
	ServicePort    int
}

type Client

type Client struct {
	// contains filtered or unexported fields
}

Client provides a client to the Consul API

func NewClient

func NewClient(config *Config) (*Client, error)

NewClient returns a new client

func (*Client) ACL

func (c *Client) ACL() *ACL

ACL returns a handle to the ACL endpoints

func (*Client) Agent

func (c *Client) Agent() *Agent

Agent returns a handle to the agent endpoints

func (*Client) Catalog

func (c *Client) Catalog() *Catalog

Catalog returns a handle to the catalog endpoints

func (*Client) Event

func (c *Client) Event() *Event

Event returns a handle to the event endpoints

func (*Client) Health

func (c *Client) Health() *Health

Health returns a handle to the health endpoints

func (*Client) KV

func (c *Client) KV() *KV

KV is used to return a handle to the K/V apis

func (*Client) LockKey

func (c *Client) LockKey(key string) (*Lock, error)

LockKey returns a handle to a lock struct which can be used to acquire and release the mutex. The key used must have write permissions.

func (*Client) LockOpts

func (c *Client) LockOpts(opts *LockOptions) (*Lock, error)

LockOpts returns a handle to a lock struct which can be used to acquire and release the mutex. The key used must have write permissions.

func (*Client) Raw

func (c *Client) Raw() *Raw

Raw returns a handle to query endpoints

func (*Client) SemaphoreOpts

func (c *Client) SemaphoreOpts(opts *SemaphoreOptions) (*Semaphore, error)

SemaphoreOpts is used to create a Semaphore with the given options. The prefix must have write privileges, and the limit must be agreed upon by all contenders. If a Session is not provided, one will be created.

func (*Client) SemaphorePrefix

func (c *Client) SemaphorePrefix(prefix string, limit int) (*Semaphore, error)

SemaphorePrefix is used to created a Semaphore which will operate at the given KV prefix and uses the given limit for the semaphore. The prefix must have write privileges, and the limit must be agreed upon by all contenders.

func (*Client) Session

func (c *Client) Session() *Session

Session returns a handle to the session endpoints

func (*Client) Status

func (c *Client) Status() *Status

Status returns a handle to the status endpoints

type Config

type Config struct {
	// Address is the address of the Consul server
	Address string

	// Scheme is the URI scheme for the Consul server
	Scheme string

	// Datacenter to use. If not provided, the default agent datacenter is used.
	Datacenter string

	// HttpClient is the client to use. Default will be
	// used if not provided.
	HttpClient *http.Client

	// HttpAuth is the auth info to use for http access.
	HttpAuth *HttpBasicAuth

	// WaitTime limits how long a Watch will block. If not provided,
	// the agent default values will be used.
	WaitTime time.Duration

	// Token is used to provide a per-request ACL token
	// which overrides the agent's default token.
	Token string
}

Config is used to configure the creation of a client

func DefaultConfig

func DefaultConfig() *Config

DefaultConfig returns a default configuration for the client

type Event

type Event struct {
	// contains filtered or unexported fields
}

Event can be used to query the Event endpoints

func (*Event) Fire

func (e *Event) Fire(params *UserEvent, q *WriteOptions) (string, *WriteMeta, error)

Fire is used to fire a new user event. Only the Name, Payload and Filters are respected. This returns the ID or an associated error. Cross DC requests are supported.

func (*Event) IDToIndex

func (e *Event) IDToIndex(uuid string) uint64

IDToIndex is a bit of a hack. This simulates the index generation to convert an event ID into a WaitIndex.

func (*Event) List

func (e *Event) List(name string, q *QueryOptions) ([]*UserEvent, *QueryMeta, error)

List is used to get the most recent events an agent has received. This list can be optionally filtered by the name. This endpoint supports quasi-blocking queries. The index is not monotonic, nor does it provide provide LastContact or KnownLeader.

type Health

type Health struct {
	// contains filtered or unexported fields
}

Health can be used to query the Health endpoints

func (*Health) Checks

func (h *Health) Checks(service string, q *QueryOptions) ([]*HealthCheck, *QueryMeta, error)

Checks is used to return the checks associated with a service

func (*Health) Node

func (h *Health) Node(node string, q *QueryOptions) ([]*HealthCheck, *QueryMeta, error)

Node is used to query for checks belonging to a given node

func (*Health) Service

func (h *Health) Service(service, tag string, passingOnly bool, q *QueryOptions) ([]*ServiceEntry, *QueryMeta, error)

Service is used to query health information along with service info for a given service. It can optionally do server-side filtering on a tag or nodes with passing health checks only.

func (*Health) State

func (h *Health) State(state string, q *QueryOptions) ([]*HealthCheck, *QueryMeta, error)

State is used to retreive all the checks in a given state. The wildcard "any" state can also be used for all checks.

type HealthCheck

type HealthCheck struct {
	Node        string
	CheckID     string
	Name        string
	Status      string
	Notes       string
	Output      string
	ServiceID   string
	ServiceName string
}

HealthCheck is used to represent a single check

type HttpBasicAuth

type HttpBasicAuth struct {
	// Username to use for HTTP Basic Authentication
	Username string

	// Password to use for HTTP Basic Authentication
	Password string
}

HttpBasicAuth is used to authenticate http client with HTTP Basic Authentication

type KV

type KV struct {
	// contains filtered or unexported fields
}

KV is used to manipulate the K/V API

func (*KV) Acquire

func (k *KV) Acquire(p *KVPair, q *WriteOptions) (bool, *WriteMeta, error)

Acquire is used for a lock acquisiiton operation. The Key, Flags, Value and Session are respected. Returns true on success or false on failures.

func (*KV) CAS

func (k *KV) CAS(p *KVPair, q *WriteOptions) (bool, *WriteMeta, error)

CAS is used for a Check-And-Set operation. The Key, ModifyIndex, Flags and Value are respected. Returns true on success or false on failures.

func (*KV) Delete

func (k *KV) Delete(key string, w *WriteOptions) (*WriteMeta, error)

Delete is used to delete a single key

func (*KV) DeleteCAS

func (k *KV) DeleteCAS(p *KVPair, q *WriteOptions) (bool, *WriteMeta, error)

DeleteCAS is used for a Delete Check-And-Set operation. The Key and ModifyIndex are respected. Returns true on success or false on failures.

func (*KV) DeleteTree

func (k *KV) DeleteTree(prefix string, w *WriteOptions) (*WriteMeta, error)

DeleteTree is used to delete all keys under a prefix

func (*KV) Get

func (k *KV) Get(key string, q *QueryOptions) (*KVPair, *QueryMeta, error)

Get is used to lookup a single key

func (*KV) Keys

func (k *KV) Keys(prefix, separator string, q *QueryOptions) ([]string, *QueryMeta, error)

Keys is used to list all the keys under a prefix. Optionally, a separator can be used to limit the responses.

func (*KV) List

func (k *KV) List(prefix string, q *QueryOptions) (KVPairs, *QueryMeta, error)

List is used to lookup all keys under a prefix

func (*KV) Put

func (k *KV) Put(p *KVPair, q *WriteOptions) (*WriteMeta, error)

Put is used to write a new value. Only the Key, Flags and Value is respected.

func (*KV) Release

func (k *KV) Release(p *KVPair, q *WriteOptions) (bool, *WriteMeta, error)

Release is used for a lock release operation. The Key, Flags, Value and Session are respected. Returns true on success or false on failures.

type KVPair

type KVPair struct {
	Key         string
	CreateIndex uint64
	ModifyIndex uint64
	LockIndex   uint64
	Flags       uint64
	Value       []byte
	Session     string
}

KVPair is used to represent a single K/V entry

type KVPairs

type KVPairs []*KVPair

KVPairs is a list of KVPair objects

type Lock

type Lock struct {
	// contains filtered or unexported fields
}

Lock is used to implement client-side leader election. It is follows the algorithm as described here: https://consul.io/docs/guides/leader-election.html.

func (*Lock) Destroy

func (l *Lock) Destroy() error

Destroy is used to cleanup the lock entry. It is not necessary to invoke. It will fail if the lock is in use.

func (*Lock) Lock

func (l *Lock) Lock(stopCh <-chan struct{}) (<-chan struct{}, error)

Lock attempts to acquire the lock and blocks while doing so. Providing a non-nil stopCh can be used to abort the lock attempt. Returns a channel that is closed if our lock is lost or an error. This channel could be closed at any time due to session invalidation, communication errors, operator intervention, etc. It is NOT safe to assume that the lock is held until Unlock() unless the Session is specifically created without any associated health checks. By default Consul sessions prefer liveness over safety and an application must be able to handle the lock being lost.

func (*Lock) Unlock

func (l *Lock) Unlock() error

Unlock released the lock. It is an error to call this if the lock is not currently held.

type LockOptions

type LockOptions struct {
	Key         string // Must be set and have write permissions
	Value       []byte // Optional, value to associate with the lock
	Session     string // Optional, created if not specified
	SessionName string // Optional, defaults to DefaultLockSessionName
	SessionTTL  string // Optional, defaults to DefaultLockSessionTTL
}

LockOptions is used to parameterize the Lock behavior.

type Node

type Node struct {
	Node    string
	Address string
}

type QueryMeta

type QueryMeta struct {
	// LastIndex. This can be used as a WaitIndex to perform
	// a blocking query
	LastIndex uint64

	// Time of last contact from the leader for the
	// server servicing the request
	LastContact time.Duration

	// Is there a known leader
	KnownLeader bool

	// How long did the request take
	RequestTime time.Duration
}

QueryMeta is used to return meta data about a query

type QueryOptions

type QueryOptions struct {
	// Providing a datacenter overwrites the DC provided
	// by the Config
	Datacenter string

	// AllowStale allows any Consul server (non-leader) to service
	// a read. This allows for lower latency and higher throughput
	AllowStale bool

	// RequireConsistent forces the read to be fully consistent.
	// This is more expensive but prevents ever performing a stale
	// read.
	RequireConsistent bool

	// WaitIndex is used to enable a blocking query. Waits
	// until the timeout or the next index is reached
	WaitIndex uint64

	// WaitTime is used to bound the duration of a wait.
	// Defaults to that of the Config, but can be overriden.
	WaitTime time.Duration

	// Token is used to provide a per-request ACL token
	// which overrides the agent's default token.
	Token string
}

QueryOptions are used to parameterize a query

type Raw

type Raw struct {
	// contains filtered or unexported fields
}

Raw can be used to do raw queries against custom endpoints

func (*Raw) Query

func (raw *Raw) Query(endpoint string, out interface{}, q *QueryOptions) (*QueryMeta, error)

Query is used to do a GET request against an endpoint and deserialize the response into an interface using standard Consul conventions.

func (*Raw) Write

func (raw *Raw) Write(endpoint string, in, out interface{}, q *WriteOptions) (*WriteMeta, error)

Write is used to do a PUT request against an endpoint and serialize/deserialized using the standard Consul conventions.

type Semaphore

type Semaphore struct {
	// contains filtered or unexported fields
}

Semaphore is used to implement a distributed semaphore using the Consul KV primitives.

func (*Semaphore) Acquire

func (s *Semaphore) Acquire(stopCh <-chan struct{}) (<-chan struct{}, error)

Acquire attempts to reserve a slot in the semaphore, blocking until success, interrupted via the stopCh or an error is encounted. Providing a non-nil stopCh can be used to abort the attempt. On success, a channel is returned that represents our slot. This channel could be closed at any time due to session invalidation, communication errors, operator intervention, etc. It is NOT safe to assume that the slot is held until Release() unless the Session is specifically created without any associated health checks. By default Consul sessions prefer liveness over safety and an application must be able to handle the session being lost.

func (*Semaphore) Destroy

func (s *Semaphore) Destroy() error

Destroy is used to cleanup the semaphore entry. It is not necessary to invoke. It will fail if the semaphore is in use.

func (*Semaphore) Release

func (s *Semaphore) Release() error

Release is used to voluntarily give up our semaphore slot. It is an error to call this if the semaphore has not been acquired.

type SemaphoreOptions

type SemaphoreOptions struct {
	Prefix      string // Must be set and have write permissions
	Limit       int    // Must be set, and be positive
	Value       []byte // Optional, value to associate with the contender entry
	Session     string // OPtional, created if not specified
	SessionName string // Optional, defaults to DefaultLockSessionName
	SessionTTL  string // Optional, defaults to DefaultLockSessionTTL
}

SemaphoreOptions is used to parameterize the Semaphore

type ServiceEntry

type ServiceEntry struct {
	Node    *Node
	Service *AgentService
	Checks  []*HealthCheck
}

ServiceEntry is used for the health service endpoint

type Session

type Session struct {
	// contains filtered or unexported fields
}

Session can be used to query the Session endpoints

func (*Session) Create

func (s *Session) Create(se *SessionEntry, q *WriteOptions) (string, *WriteMeta, error)

Create makes a new session. Providing a session entry can customize the session. It can also be nil to use defaults.

func (*Session) CreateNoChecks

func (s *Session) CreateNoChecks(se *SessionEntry, q *WriteOptions) (string, *WriteMeta, error)

CreateNoChecks is like Create but is used specifically to create a session with no associated health checks.

func (*Session) Destroy

func (s *Session) Destroy(id string, q *WriteOptions) (*WriteMeta, error)

Destroy invalides a given session

func (*Session) Info

func (s *Session) Info(id string, q *QueryOptions) (*SessionEntry, *QueryMeta, error)

Info looks up a single session

func (*Session) List

func (s *Session) List(q *QueryOptions) ([]*SessionEntry, *QueryMeta, error)

List gets all active sessions

func (*Session) Node

func (s *Session) Node(node string, q *QueryOptions) ([]*SessionEntry, *QueryMeta, error)

List gets sessions for a node

func (*Session) Renew

func (s *Session) Renew(id string, q *WriteOptions) (*SessionEntry, *WriteMeta, error)

Renew renews the TTL on a given session

func (*Session) RenewPeriodic

func (s *Session) RenewPeriodic(initialTTL string, id string, q *WriteOptions, doneCh chan struct{}) error

RenewPeriodic is used to periodically invoke Session.Renew on a session until a doneCh is closed. This is meant to be used in a long running goroutine to ensure a session stays valid.

type SessionEntry

type SessionEntry struct {
	CreateIndex uint64
	ID          string
	Name        string
	Node        string
	Checks      []string
	LockDelay   time.Duration
	Behavior    string
	TTL         string
}

SessionEntry represents a session in consul

type Status

type Status struct {
	// contains filtered or unexported fields
}

Status can be used to query the Status endpoints

func (*Status) Leader

func (s *Status) Leader() (string, error)

Leader is used to query for a known leader

func (*Status) Peers

func (s *Status) Peers() ([]string, error)

Peers is used to query for a known raft peers

type UserEvent

type UserEvent struct {
	ID            string
	Name          string
	Payload       []byte
	NodeFilter    string
	ServiceFilter string
	TagFilter     string
	Version       int
	LTime         uint64
}

UserEvent represents an event that was fired by the user

type WriteMeta

type WriteMeta struct {
	// How long did the request take
	RequestTime time.Duration
}

WriteMeta is used to return meta data about a write

type WriteOptions

type WriteOptions struct {
	// Providing a datacenter overwrites the DC provided
	// by the Config
	Datacenter string

	// Token is used to provide a per-request ACL token
	// which overrides the agent's default token.
	Token string
}

WriteOptions are used to parameterize a write

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL