rtnetlink

package module
v1.3.3 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: May 5, 2023 License: MIT Imports: 11 Imported by: 74

README

Package rtnetlink allows the kernel's routing tables to be read and altered. Network routes, IP addresses, Link parameters, Neighbor setups, Queueing disciplines, Traffic classes and Packet classifiers may all be controlled. It is based on netlink messages.

A convenient, high-level API wrapper is available using package rtnl.

The base rtnetlink library explicitly only exposes a limited low-level API to rtnetlink. It is not the intention (nor wish) to create an iproute2 replacement.

Unfortunately the errors generated by the kernels netlink interface are not very great.

When in doubt about your message structure it can always be useful to look at the message send by iproute2 using strace -f -esendmsg /bin/ip or similar.

Another (and possibly even more flexible) way would be using nlmon and wireshark. nlmod is a special kernel module which allows you to capture all netlink (not just rtnetlink) traffic inside the kernel. Be aware that this might be overwhelming on a system with a lot of netlink traffic.

# modprobe nlmon
# ip link add type nlmon
# ip link set nlmon0 up

At this point use wireshark or tcpdump on the nlmon0 interface to view all netlink traffic.

Have a look at the examples for common uses of rtnetlink.

If you have any questions or you'd like some guidance, please join us on Gophers Slack in the #networking channel!

Documentation

Overview

Package rtnetlink allows the kernel's routing tables to be read and altered. Network routes, IP addresses, Link parameters, Neighbor setups, Queueing disciplines, Traffic classes and Packet classifiers may all be controlled. It is based on netlink messages.

A convenient, high-level API wrapper is available using package rtnl: https://godoc.org/github.com/jsimonetti/rtnetlink/rtnl.

The base rtnetlink library xplicitly only exposes a limited low-level API to rtnetlink. It is not the intention (nor wish) to create an iproute2 replacement.

When in doubt about your message structure it can always be useful to look at the message send by iproute2 using 'strace -f -esendmsg' or similar.

Another (and possibly even more flexible) way would be using 'nlmon' and wireshark. nlmod is a special kernel module which allows you to capture all (not just rtnetlink) netlink traffic inside the kernel. Be aware that this might be overwhelming on a system with a lot of netlink traffic. 

# modprobe nlmon
# ip link add type nlmon
# ip link set nlmon0 up

At this point use wireshark or tcpdump on the nlmon0 interface to view all netlink traffic.

Have a look at the examples for common uses of rtnetlink.

Example (AddAddress)

Add IP address '127.0.0.2/8' to an interface 'lo' 

package main

import (
	"encoding/binary"
	"log"
	"net"

	"github.com/jsimonetti/rtnetlink"
	"golang.org/x/sys/unix"
)

func main() {
	// Gather the interface Index
	iface, _ := net.InterfaceByName("lo")
	// Get an ip address to add to the interface
	addr, cidr, _ := net.ParseCIDR("127.0.0.2/8")

	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	// Test for the right address family for addr
	family := unix.AF_INET6
	to4 := cidr.IP.To4()
	if to4 != nil {
		family = unix.AF_INET
	}
	// Calculate the prefix length
	ones, _ := cidr.Mask.Size()

	// Calculate the broadcast IP
	// Only used when family is AF_INET
	var brd net.IP
	if to4 != nil {
		brd = make(net.IP, len(to4))
		binary.BigEndian.PutUint32(brd, binary.BigEndian.Uint32(to4)|^binary.BigEndian.Uint32(net.IP(cidr.Mask).To4()))
	}

	// Send the message using the rtnetlink.Conn
	err = conn.Address.New(&rtnetlink.AddressMessage{
		Family:       uint8(family),
		PrefixLength: uint8(ones),
		Scope:        unix.RT_SCOPE_UNIVERSE,
		Index:        uint32(iface.Index),
		Attributes: &rtnetlink.AddressAttributes{
			Address:   addr,
			Local:     addr,
			Broadcast: brd,
		},
	})

	log.Fatal(err)
}
Example (AddRoute)

Add a route 

package main

import (
	"log"
	"net"

	"github.com/jsimonetti/rtnetlink"
	"golang.org/x/sys/unix"
)

func main() {
	// Gather the interface Index
	iface, _ := net.InterfaceByName("lo")
	// Get a route to add
	_, dst, _ := net.ParseCIDR("192.168.0.0/16")
	// Get a gw to use
	gw := net.ParseIP("127.0.0.1")

	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	attr := rtnetlink.RouteAttributes{
		Dst:      dst.IP,
		OutIface: uint32(iface.Index),
	}
	if gw == nil {
		attr.Gateway = gw
	}
	ones, _ := dst.Mask.Size()

	err = conn.Route.Add(&rtnetlink.RouteMessage{
		Family:     unix.AF_INET,
		Table:      unix.RT_TABLE_MAIN,
		Protocol:   unix.RTPROT_BOOT,
		Scope:      unix.RT_SCOPE_LINK,
		Type:       unix.RTN_UNICAST,
		DstLength:  uint8(ones),
		Attributes: attr,
	})

	log.Fatal(err)
}
Example (DeleteAddress)

Delete IP address '127.0.0.2/8' from interface 'lo' 

package main

import (
	"encoding/binary"
	"log"
	"net"

	"github.com/jsimonetti/rtnetlink"
	"golang.org/x/sys/unix"
)

func main() {
	// Gather the interface Index
	iface, _ := net.InterfaceByName("lo")
	// Get an ip address to delete from the interface
	addr, cidr, _ := net.ParseCIDR("127.0.0.2/8")

	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	// Test for the right address family for addr
	family := unix.AF_INET6
	to4 := cidr.IP.To4()
	if to4 != nil {
		family = unix.AF_INET
	}
	// Calculate the prefix length
	ones, _ := cidr.Mask.Size()

	// Calculate the broadcast IP
	// Only used when family is AF_INET
	var brd net.IP
	if to4 != nil {
		brd = make(net.IP, len(to4))
		binary.BigEndian.PutUint32(brd, binary.BigEndian.Uint32(to4)|^binary.BigEndian.Uint32(net.IP(cidr.Mask).To4()))
	}

	// Send the message using the rtnetlink.Conn
	err = conn.Address.Delete(&rtnetlink.AddressMessage{
		Family:       uint8(family),
		PrefixLength: uint8(ones),
		Index:        uint32(iface.Index),
		Attributes: &rtnetlink.AddressAttributes{
			Address:   addr,
			Broadcast: brd,
		},
	})

	log.Fatal(err)
}
Example (ListAddress)

List all IPv4 addresses configured on interface 'lo' 

package main

import (
	"log"
	"net"

	"github.com/jsimonetti/rtnetlink"
	"golang.org/x/sys/unix"
)

func main() {
	// Gather the interface Index
	iface, _ := net.InterfaceByName("lo")
	// Get an ip address to add to the interface
	family := uint8(unix.AF_INET)

	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	// Request a list of addresses
	msg, err := conn.Address.List()
	if err != nil {
		log.Fatal(err)
	}

	// Filter out the wanted messages and put them in the 'addr' slice.
	var addr []rtnetlink.AddressMessage
	for _, v := range msg {
		add := true
		if iface != nil && v.Index != uint32(iface.Index) {
			add = false
		}
		if family != 0 && v.Family != family {
			add = false
		}
		if add {
			addr = append(addr, v)
		}
	}

	log.Printf("%#v", addr)
}
Example (ListNeighbors)

List all neighbors on interface 'lo' 

package main

import (
	"log"
	"net"

	"github.com/jsimonetti/rtnetlink"
	"golang.org/x/sys/unix"
)

func main() {
	// Gather the interface Index
	iface, _ := net.InterfaceByName("lo")
	// Get an ip address to add to the interface
	family := uint8(unix.AF_INET)

	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	// Request all neighbors
	msg, err := conn.Neigh.List()
	if err != nil {
		log.Fatal(err)
	}

	// Filter neighbors by family and interface index
	var neigh []rtnetlink.NeighMessage
	for _, v := range msg {
		add := true
		if iface != nil && v.Index != uint32(iface.Index) {
			add = false
		}
		if family != 0 && v.Family != uint16(family) {
			add = false
		}
		if add {
			neigh = append(neigh, v)
		}
	}

	log.Printf("%#v", neigh)
}
Example (ListRule)

List all rules 

package main

import (
	"log"

	"github.com/jsimonetti/rtnetlink"
)

func main() {
	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	// Request a list of rules
	rules, err := conn.Rule.List()
	if err != nil {
		log.Fatal(err)
	}

	for _, rule := range rules {
		log.Printf("%+v", rule)
	}
}
Example (SetLinkDown)

Set the operational state an interface to Down 

package main

import (
	"log"
	"net"

	"github.com/jsimonetti/rtnetlink"
)

func main() {
	// Gather the interface Index
	iface, _ := net.InterfaceByName("dummy0")

	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	// Request the details of the interface
	msg, err := conn.Link.Get(uint32(iface.Index))
	if err != nil {
		log.Fatal(err)
	}

	state := msg.Attributes.OperationalState
	// If the link is already down, return immediately
	if state == rtnetlink.OperStateDown {
		return
	}

	// Set the interface operationally Down
	err = conn.Link.Set(&rtnetlink.LinkMessage{
		Family: 0x0,
		Type:   msg.Type,
		Index:  uint32(iface.Index),
		Flags:  0x0,
		Change: 0x1,
	})

	log.Fatal(err)
}
Example (SetLinkHWAddr)

Set the hw address of an interface 

package main

import (
	"log"
	"net"

	"github.com/jsimonetti/rtnetlink"
)

func main() {
	// Gather the interface Index
	iface, _ := net.InterfaceByName("dummy0")
	// Get a hw addr to set the interface to
	hwAddr, _ := net.ParseMAC("ce:9c:5b:98:55:9c")

	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	// Request the details of the interface
	msg, err := conn.Link.Get(uint32(iface.Index))
	if err != nil {
		log.Fatal(err)
	}

	// Set the hw address of the interfaces
	err = conn.Link.Set(&rtnetlink.LinkMessage{
		Family: 0x0,
		Type:   msg.Type,
		Index:  uint32(iface.Index),
		Flags:  msg.Flags,
		Change: msg.Change,
		Attributes: &rtnetlink.LinkAttributes{
			Address: hwAddr,
		},
	})

	log.Fatal(err)
}
Example (SetLinkUp)

Set the operational state an interface to Up 

package main

import (
	"log"
	"net"

	"github.com/jsimonetti/rtnetlink"
	"golang.org/x/sys/unix"
)

func main() {
	// Gather the interface Index
	iface, _ := net.InterfaceByName("dummy0")

	// Dial a connection to the rtnetlink socket
	conn, err := rtnetlink.Dial(nil)
	if err != nil {
		log.Fatal(err)
	}
	defer conn.Close()

	// Request the details of the interface
	msg, err := conn.Link.Get(uint32(iface.Index))
	if err != nil {
		log.Fatal(err)
	}

	state := msg.Attributes.OperationalState
	// If the link is already up, return immediately
	if state == rtnetlink.OperStateUp || state == rtnetlink.OperStateUnknown {
		return
	}

	// Set the interface operationally UP
	err = conn.Link.Set(&rtnetlink.LinkMessage{
		Family: unix.AF_UNSPEC,
		Type:   msg.Type,
		Index:  uint32(iface.Index),
		Flags:  unix.IFF_UP,
		Change: unix.IFF_UP,
	})

	log.Fatal(err)
}

Index

Examples

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type AddressAttributes 

type AddressAttributes struct {
	Address   net.IP // Interface Ip address
	Local     net.IP // Local Ip address
	Label     string
	Broadcast net.IP    // Broadcast Ip address
	Anycast   net.IP    // Anycast Ip address
	CacheInfo CacheInfo // Address information
	Multicast net.IP    // Multicast Ip address
	Flags     uint32    // Address flags
}

AddressAttributes contains all attributes for an interface.

type AddressMessage 

type AddressMessage struct {
	// Address family (current unix.AF_INET or unix.AF_INET6)
	Family uint8

	// Prefix length
	PrefixLength uint8

	// Contains address flags
	Flags uint8

	// Address Scope
	Scope uint8

	// Interface index
	Index uint32

	// Optional attributes which are appended when not nil.
	Attributes *AddressAttributes
}

A AddressMessage is a route netlink address message.

func (*AddressMessage) MarshalBinary 

func (m *AddressMessage) MarshalBinary() ([]byte, error)

MarshalBinary marshals a AddressMessage into a byte slice.

func (*AddressMessage) UnmarshalBinary 

func (m *AddressMessage) UnmarshalBinary(b []byte) error

UnmarshalBinary unmarshals the contents of a byte slice into a AddressMessage.

type AddressService 

type AddressService struct {
	// contains filtered or unexported fields
}

AddressService is used to retrieve rtnetlink family information.

func (*AddressService) Delete 

func (a *AddressService) Delete(req *AddressMessage) error

Delete removes an address using the AddressMessage information.

func (*AddressService) List 

func (a *AddressService) List() ([]AddressMessage, error)

List retrieves all addresses.

func (*AddressService) New 

func (a *AddressService) New(req *AddressMessage) error

New creates a new address using the AddressMessage information.

type CacheInfo 

type CacheInfo struct {
	Prefered uint32
	Valid    uint32
	Created  uint32
	Updated  uint32
}

CacheInfo contains address information

type Conn 

type Conn struct {
	Link    *LinkService
	Address *AddressService
	Route   *RouteService
	Neigh   *NeighService
	Rule    *RuleService
	// contains filtered or unexported fields
}

A Conn is a route netlink connection. A Conn can be used to send and receive route netlink messages to and from netlink.

func Dial 

func Dial(config *netlink.Config) (*Conn, error)

Dial dials a route netlink connection. Config specifies optional configuration for the underlying netlink connection. If config is nil, a default configuration will be used.

func (*Conn) Close 

func (c *Conn) Close() error

Close closes the connection.

func (*Conn) Execute 

func (c *Conn) Execute(m Message, family uint16, flags netlink.HeaderFlags) ([]Message, error)

Execute sends a single Message to netlink using Send, receives one or more replies using Receive, and then checks the validity of the replies against the request using netlink.Validate.

Execute acquires a lock for the duration of the function call which blocks concurrent calls to Send and Receive, in order to ensure consistency between generic netlink request/reply messages.

See the documentation of Send, Receive, and netlink.Validate for details about each function.

func (*Conn) Receive 

func (c *Conn) Receive() ([]Message, []netlink.Message, error)

Receive receives one or more Messages from netlink. The netlink.Messages used to wrap each Message are available for later validation.

func (*Conn) Send 

func (c *Conn) Send(m Message, family uint16, flags netlink.HeaderFlags) (netlink.Message, error)

Send sends a single Message to netlink, wrapping it in a netlink.Message using the specified generic netlink family and flags. On success, Send returns a copy of the netlink.Message with all parameters populated, for later validation.

func (*Conn) SetOption 

func (c *Conn) SetOption(option netlink.ConnOption, enable bool) error

SetOption enables or disables a netlink socket option for the Conn.

func (*Conn) SetReadDeadline 

func (c *Conn) SetReadDeadline(t time.Time) error

SetReadDeadline sets the read deadline associated with the connection.

type LinkAttributes 

type LinkAttributes struct {
	Address          net.HardwareAddr // Interface L2 address
	Alias            *string          // Interface alias name
	Broadcast        net.HardwareAddr // L2 broadcast address
	Carrier          *uint8           // Current physical link state of the interface.
	CarrierChanges   *uint32          // Number of times the link has seen a change from UP to DOWN and vice versa
	CarrierUpCount   *uint32          // Number of times the link has been up
	CarrierDownCount *uint32          // Number of times the link has been down
	Index            *uint32          // System-wide interface unique index identifier
	Info             *LinkInfo        // Detailed Interface Information
	LinkMode         *uint8           // Interface link mode
	MTU              uint32           // MTU of the device
	Name             string           // Device name
	NetDevGroup      *uint32          // Interface network device group
	OperationalState OperationalState // Interface operation state
	PhysPortID       *string          // Interface unique physical port identifier within the NIC
	PhysPortName     *string          // Interface physical port name within the NIC
	PhysSwitchID     *string          // Unique physical switch identifier of a switch this port belongs to
	QueueDisc        string           // Queueing discipline
	Master           *uint32          // Master device index (0 value un-enslaves)
	Stats            *LinkStats       // Interface Statistics
	Stats64          *LinkStats64     // Interface Statistics (64 bits version)
	TxQueueLen       *uint32          // Interface transmit queue len in number of packets
	Type             uint32           // Link type
	XDP              *LinkXDP         // Express Data Patch Information
}

LinkAttributes contains all attributes for an interface.

type LinkInfo 

type LinkInfo struct {
	Kind      string // Driver name
	Data      []byte // Driver specific configuration stored as nested Netlink messages
	SlaveKind string // Slave driver name
	SlaveData []byte // Slave driver specific configuration
}

LinkInfo contains data for specific network types

type LinkMessage 

type LinkMessage struct {
	// Always set to AF_UNSPEC (0)
	Family uint16

	// Device Type
	Type uint16

	// Unique interface index, using a nonzero value with
	// NewLink will instruct the kernel to create a
	// device with the given index (kernel 3.7+ required)
	Index uint32

	// Contains device flags, see netdevice(7)
	Flags uint32

	// Change Flags, specifies which flags will be affected by the Flags field
	Change uint32

	// Attributes List
	Attributes *LinkAttributes
}

A LinkMessage is a route netlink link message.

func (*LinkMessage) MarshalBinary 

func (m *LinkMessage) MarshalBinary() ([]byte, error)

MarshalBinary marshals a LinkMessage into a byte slice.

func (*LinkMessage) UnmarshalBinary 

func (m *LinkMessage) UnmarshalBinary(b []byte) error

UnmarshalBinary unmarshals the contents of a byte slice into a LinkMessage.

type LinkService 

type LinkService struct {
	// contains filtered or unexported fields
}

LinkService is used to retrieve rtnetlink family information.

func (*LinkService) Delete 

func (l *LinkService) Delete(index uint32) error

Delete removes an interface by index.

func (*LinkService) Get 

func (l *LinkService) Get(index uint32) (LinkMessage, error)

Get retrieves interface information by index.

func (*LinkService) List 

func (l *LinkService) List() ([]LinkMessage, error)

List retrieves all interfaces.

func (*LinkService) ListByKind 

func (l *LinkService) ListByKind(kind string) ([]LinkMessage, error)

ListByKind retrieves all interfaces of a specific kind.

func (*LinkService) New 

func (l *LinkService) New(req *LinkMessage) error

New creates a new interface using the LinkMessage information.

func (*LinkService) Set 

func (l *LinkService) Set(req *LinkMessage) error

Set sets interface attributes according to the LinkMessage information.

ref: https://lwn.net/Articles/236919/ We explicitly use RTM_NEWLINK to set link attributes instead of RTM_SETLINK because:

  • using RTM_SETLINK is actually an old rtnetlink API, not supporting most attributes common today
  • using RTM_NEWLINK is the prefered way to create AND update links
  • RTM_NEWLINK is backward compatible to RTM_SETLINK

type LinkStats 

type LinkStats struct {
	RXPackets  uint32 // total packets received
	TXPackets  uint32 // total packets transmitted
	RXBytes    uint32 // total bytes received
	TXBytes    uint32 // total bytes transmitted
	RXErrors   uint32 // bad packets received
	TXErrors   uint32 // packet transmit problems
	RXDropped  uint32 // no space in linux buffers
	TXDropped  uint32 // no space available in linux
	Multicast  uint32 // multicast packets received
	Collisions uint32

	// detailed rx_errors:
	RXLengthErrors uint32
	RXOverErrors   uint32 // receiver ring buff overflow
	RXCRCErrors    uint32 // recved pkt with crc error
	RXFrameErrors  uint32 // recv'd frame alignment error
	RXFIFOErrors   uint32 // recv'r fifo overrun
	RXMissedErrors uint32 // receiver missed packet

	// detailed tx_errors
	TXAbortedErrors   uint32
	TXCarrierErrors   uint32
	TXFIFOErrors      uint32
	TXHeartbeatErrors uint32
	TXWindowErrors    uint32

	// for cslip etc
	RXCompressed uint32
	TXCompressed uint32

	RXNoHandler uint32 // dropped, no handler found
}

LinkStats contains packet statistics

type LinkStats64 

type LinkStats64 struct {
	RXPackets  uint64 // total packets received
	TXPackets  uint64 // total packets transmitted
	RXBytes    uint64 // total bytes received
	TXBytes    uint64 // total bytes transmitted
	RXErrors   uint64 // bad packets received
	TXErrors   uint64 // packet transmit problems
	RXDropped  uint64 // no space in linux buffers
	TXDropped  uint64 // no space available in linux
	Multicast  uint64 // multicast packets received
	Collisions uint64

	// detailed rx_errors:
	RXLengthErrors uint64
	RXOverErrors   uint64 // receiver ring buff overflow
	RXCRCErrors    uint64 // recved pkt with crc error
	RXFrameErrors  uint64 // recv'd frame alignment error
	RXFIFOErrors   uint64 // recv'r fifo overrun
	RXMissedErrors uint64 // receiver missed packet

	// detailed tx_errors
	TXAbortedErrors   uint64
	TXCarrierErrors   uint64
	TXFIFOErrors      uint64
	TXHeartbeatErrors uint64
	TXWindowErrors    uint64

	// for cslip etc
	RXCompressed uint64
	TXCompressed uint64

	RXNoHandler uint64 // dropped, no handler found

	RXOtherhostDropped uint64 // Number of packets dropped due to mismatch in destination MAC address.
}

LinkStats64 contains packet statistics

type LinkXDP 

type LinkXDP struct {
	FD         int32
	ExpectedFD int32
	Attached   uint8
	Flags      uint32
	ProgID     uint32
}

LinkXDP holds Express Data Path specific information

type MPLSNextHop 

type MPLSNextHop struct {
	Label         int
	TrafficClass  int
	BottomOfStack bool
	TTL           uint8
}

An MPLSNextHop is a route next hop using MPLS encapsulation.

type Message 

type Message interface {
	encoding.BinaryMarshaler
	encoding.BinaryUnmarshaler
	// contains filtered or unexported methods
}

Message is the interface used for passing around different kinds of rtnetlink messages

type NeighAttributes 

type NeighAttributes struct {
	Address   net.IP           // a neighbor cache n/w layer destination address
	LLAddress net.HardwareAddr // a neighbor cache link layer address
	CacheInfo *NeighCacheInfo  // cache statistics
	IfIndex   uint32
}

NeighAttributes contains all attributes for a neighbor.

type NeighCacheInfo 

type NeighCacheInfo struct {
	Confirmed uint32
	Used      uint32
	Updated   uint32
	RefCount  uint32
}

NeighCacheInfo contains neigh information

type NeighMessage 

type NeighMessage struct {
	// Always set to AF_UNSPEC (0)
	Family uint16

	// Unique interface index
	Index uint32

	// Neighbor State is a bitmask of neighbor states (see rtnetlink(7))
	State uint16

	// Neighbor flags
	Flags uint8

	// Neighbor type
	Type uint8

	// Attributes List
	Attributes *NeighAttributes
}

A NeighMessage is a route netlink neighbor message.

func (*NeighMessage) MarshalBinary 

func (m *NeighMessage) MarshalBinary() ([]byte, error)

MarshalBinary marshals a NeighMessage into a byte slice.

func (*NeighMessage) UnmarshalBinary 

func (m *NeighMessage) UnmarshalBinary(b []byte) error

UnmarshalBinary unmarshals the contents of a byte slice into a NeighMessage.

type NeighService 

type NeighService struct {
	// contains filtered or unexported fields
}

NeighService is used to retrieve rtnetlink family information.

func (*NeighService) Delete 

func (l *NeighService) Delete(index uint32) error

Delete removes an neighbor entry by index.

func (*NeighService) List 

func (l *NeighService) List() ([]NeighMessage, error)

List retrieves all neighbors.

func (*NeighService) New 

func (l *NeighService) New(req *NeighMessage) error

New creates a new interface using the LinkMessage information.

type NextHop 

type NextHop struct {
	Hop     RTNextHop     // a rtnexthop struct
	Gateway net.IP        // that struct's nested Gateway attribute
	MPLS    []MPLSNextHop // Any MPLS next hops for a route.
}

NextHop wraps struct rtnexthop to provide access to nested attributes

type OperationalState 

type OperationalState uint8

OperationalState represents an interface's operational state. 

const (
	OperStateUnknown        OperationalState = iota // status could not be determined
	OperStateNotPresent                             // down, due to some missing component (typically hardware)
	OperStateDown                                   // down, either administratively or due to a fault
	OperStateLowerLayerDown                         // down, due to lower-layer interfaces
	OperStateTesting                                // operationally down, in some test mode
	OperStateDormant                                // down, waiting for some external event
	OperStateUp                                     // interface is in a state to send and receive packets
)

Constants that represent operational state of an interface

Adapted from https://elixir.bootlin.com/linux/v4.19.2/source/include/uapi/linux/if.h#L166

type RTNextHop 

type RTNextHop struct {
	Length  uint16 // length of this hop including nested values
	Flags   uint8  // flags defined in rtnetlink.h line 311
	Hops    uint8
	IfIndex uint32 // the interface index number
}

RTNextHop represents the netlink rtnexthop struct (not an attribute)

type RouteAttributes 

type RouteAttributes struct {
	Dst       net.IP
	Src       net.IP
	Gateway   net.IP
	OutIface  uint32
	Priority  uint32
	Table     uint32
	Mark      uint32
	Pref      *uint8
	Expires   *uint32
	Metrics   *RouteMetrics
	Multipath []NextHop
}

type RouteMessage 

type RouteMessage struct {
	Family    uint8 // Address family (current unix.AF_INET or unix.AF_INET6)
	DstLength uint8 // Length of destination prefix
	SrcLength uint8 // Length of source prefix
	Tos       uint8 // TOS filter
	Table     uint8 // Routing table ID
	Protocol  uint8 // Routing protocol
	Scope     uint8 // Distance to the destination
	Type      uint8 // Route type
	Flags     uint32

	Attributes RouteAttributes
}

func (*RouteMessage) MarshalBinary 

func (m *RouteMessage) MarshalBinary() ([]byte, error)

func (*RouteMessage) UnmarshalBinary 

func (m *RouteMessage) UnmarshalBinary(b []byte) error

type RouteMetrics 

type RouteMetrics struct {
	AdvMSS   uint32
	Features uint32
	InitCwnd uint32
	InitRwnd uint32
	MTU      uint32
}

RouteMetrics holds some advanced metrics for a route

type RouteService 

type RouteService struct {
	// contains filtered or unexported fields
}

func (*RouteService) Add 

func (r *RouteService) Add(req *RouteMessage) error

Add new route

func (*RouteService) Delete 

func (r *RouteService) Delete(req *RouteMessage) error

Delete existing route

func (*RouteService) Get 

func (r *RouteService) Get(req *RouteMessage) ([]RouteMessage, error)

Get Route(s)

func (*RouteService) List 

func (r *RouteService) List() ([]RouteMessage, error)

List all routes

func (*RouteService) Replace 

func (r *RouteService) Replace(req *RouteMessage) error

Replace or add new route

type RuleAttributes added in v1.2.0 

type RuleAttributes struct {
	Src, Dst          *net.IP
	IIFName, OIFName  *string
	Goto              *uint32
	Priority          *uint32
	FwMark, FwMask    *uint32
	SrcRealm          *uint16
	DstRealm          *uint16
	TunID             *uint64
	Table             *uint32
	L3MDev            *uint8
	Protocol          *uint8
	IPProto           *uint8
	SuppressPrefixLen *uint32
	SuppressIFGroup   *uint32
	UIDRange          *RuleUIDRange
	SPortRange        *RulePortRange
	DPortRange        *RulePortRange
}

RuleAttributes contains all attributes for a rule.

type RuleMessage added in v1.2.0 

type RuleMessage struct {
	// Address family
	Family uint8

	// Length of destination prefix
	DstLength uint8

	// Length of source prefix
	SrcLength uint8

	// Rule TOS
	TOS uint8

	// Routing table identifier
	Table uint8

	// Rule action
	Action uint8

	// Rule flags
	Flags uint32

	// Attributes List
	Attributes *RuleAttributes
}

A RuleMessage is a route netlink link message.

func (*RuleMessage) MarshalBinary added in v1.2.0 

func (m *RuleMessage) MarshalBinary() ([]byte, error)

MarshalBinary marshals a LinkMessage into a byte slice.

func (*RuleMessage) UnmarshalBinary added in v1.2.0 

func (m *RuleMessage) UnmarshalBinary(b []byte) error

UnmarshalBinary unmarshals the contents of a byte slice into a LinkMessage.

type RulePortRange added in v1.2.0 

type RulePortRange struct {
	Start, End uint16
}

RulePortRange defines start and end ports for a rule

type RuleService added in v1.2.0 

type RuleService struct {
	// contains filtered or unexported fields
}

RuleService is used to retrieve rtnetlink family information.

func (*RuleService) Add added in v1.2.0 

func (r *RuleService) Add(req *RuleMessage) error

Add new rule

func (*RuleService) Delete added in v1.2.0 

func (r *RuleService) Delete(req *RuleMessage) error

Delete existing rule

func (*RuleService) Get added in v1.2.0 

func (r *RuleService) Get(req *RuleMessage) ([]RuleMessage, error)

Get Rule(s)

func (*RuleService) List added in v1.2.0 

func (r *RuleService) List() ([]RuleMessage, error)

List all rules

func (*RuleService) Replace added in v1.2.0 

func (r *RuleService) Replace(req *RuleMessage) error

Replace or add new rule

type RuleUIDRange added in v1.2.0 

type RuleUIDRange struct {
	Start, End uint16
}

RuleUIDRange defines the start and end for UID matches

Source Files

View all Source files

Directories

Path Synopsis
internal
unix
Package rtnl provides a convenient API on top of the rtnetlink library.
 Package rtnl provides a convenient API on top of the rtnetlink library.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.