auto-hard-reset

README

RPi miner auto-hard-reset

Simple Go program for automatically hard reset a computer with Raspberry Pi or other mini-computer from the GPIO pins

Still in progress

I'm using 5V relay and checking the miners with ping command. If there is no answer - hard-reset with the GPIO pins.

Logic

• Ping miners at most every 30 minutes (the period is configurable).
• if offline > send signal for 5 sec (turn off pc), pause 5 sec(wait) and send signal again for 0.108 second (turn on pc)

How-to

I'm using Raspberry Pi with 5V relay. Soon I will add detailed instruction but you can find a lot of information how to use 5v relay with Raspberry Pi. This is the basics.

Depending of your Raspberry Pi version, download one of the archives arm6 - (Raspberry Pi A, A+, B, B+, Zero) arm7 - (Raspberry Pi 2, 3)

Open the folder from the console and type (example with arm7)

tar -xvzf auto-hard-reset-arm7.tar.gz
chmod +x auto-hard-reset-arm7

and after you configure the config.json

./auto-hard-reset-arm7

Configuration for this program is stored in file config.json . Example config.json:

{
    "WaitSeconds": 1800, //time in seconds 
    "StartupCheck" : true, //check miners on program startup
    "Log" : true, //Output file log
    "RemoteNotify" : false, //Remote notification (Pushoverapp)
    "TgBotActivate" : false, //Telegram bot activation
    "TgAPIKey" : "", //Telegram API key
    "TgAdminUserName" : "USERNAME", //Telegram username of the admin
    "Pushover": false, //Pushover activation
    "PushoverToken": "ACCESS-TOKEN", //Pushover access token
    "PushoverUser": "USER-TOKEN", //Pushover user token
    "Miners": [
        {   "Name": "m0", "Pin": "40", "Ip": "192.168.0.100", "Info": "R9 290's"  },    
        {   "Name": "m1", "Pin": "38", "Ip": "192.168.0.101", "Info": "RX480's"   }      
    ]
}

Build

Requirements

• Raspberry Pi
• Golang >= 1.8.0

Type go get -u -v github.com/kasmetski/auto-hard-reset

If you are building on your Raspberry Pi, type go build *.go in the folder. If you are building on your workstation type GOARM=6(or 7) GOARCH=arm GOOS=linux go build *.go

GOARM=6 (Raspberry Pi A, A+, B, B+, Zero) GOARM=7 (Raspberry Pi 2, 3)

ToDo

• web interface
• JSON-check
• instructions
• statistics