gofs

README

gofs

English | 简体中文

A file synchronization tool out of the box based on golang.

Installation

go install github.com/no-src/gofs/...@latest

Run In the Background

You can install a program run in the background using the following command on Windows.

go install -ldflags="-H windowsgui" github.com/no-src/gofs/...@latest

Remove File Server

If you don't need a file server, you can install the program without the file server to reduce the file size of this.

go install -tags "no_server" github.com/no-src/gofs/...@latest

Quick Start

Prerequisites

Please ensure the source directory and dest directory exists first, replace the following path with your real path.

$ mkdir source dest

Generate the TLS cert file and key file for testing purposes.

The TLS cert and key files are just used by File Server and Remote Disk Server.

$ go run $GOROOT/src/crypto/tls/generate_cert.go --host 127.0.0.1
2021/12/30 17:21:54 wrote cert.pem
2021/12/30 17:21:54 wrote key.pem

Look up our workspace.

$ ls
cert.pem  key.pem  source  dest

Local Disk

Monitor source directory and sync change files to dest directory.

You can use the logically_delete flag to enable the logically delete and avoid deleting files by mistake.

$ gofs -source=./source -dest=./dest

Sync Once

Sync the whole path immediately from source directory to dest directory.

$ gofs -source=./source -dest=./dest -sync_once

Sync Cron

Sync the whole path from source directory to dest directory with cron.

# Per 30 seconds sync the whole path from source directory to dest directory
$ gofs -source=./source -dest=./dest -sync_cron="*/30 * * * * *"

Daemon Mode

Start a daemon to create subprocess to work, and record pid info to pid file.

$  gofs -source=./source -dest=./dest -daemon -daemon_pid

File Server

Start a file server for source directory and dest directory.

The file server is use HTTPS default, set the tls_cert_file and tls_key_file flags to customize the cert file and key file.

You can disable the HTTPS by set the tls flag to false if you don't need it.

If you set the tls to true, the file server default port is 443, otherwise it is 80, and you can customize the default port with the server_addr flag, like -server_addr=":443".

You should set the rand_user_count flag to auto generate some random users or set the users flag to customize server users for security reasons.

The server users will output to log if you set the rand_user_count flag greater than zero.

If you need to compress the files, add the server_compress flag to enable gzip compression for response, but it is not fast now.

# Start a file server and create three random users
# Replace the `tls_cert_file` and `tls_key_file` flags with your real cert files in the production environment
$ gofs -source=./source -dest=./dest -server -tls_cert_file=cert.pem -tls_key_file=key.pem -rand_user_count=3

Remote Disk Server

Start a remote disk server as a remote file source.

The source flag detail see Remote Server Source Protocol.

Pay attention to that remote disk server users must have read permission at least, for example, -users="gofs|password|r".

# Start a remote disk server
# Replace the `tls_cert_file` and `tls_key_file` flags with your real cert files in the production environment
# Replace the `users` flag with complex username and password for security
$ gofs -source="rs://127.0.0.1:8105?mode=server&local_sync_disabled=true&path=./source&fs_server=https://127.0.0.1" -dest=./dest -users="gofs|password|r" -tls_cert_file=cert.pem -tls_key_file=key.pem

Remote Disk Client

Start a remote disk client to sync change files from remote disk server.

Use the sync_once flag to sync the whole path immediately from remote disk server to local dest directory, like Sync Once.

Use the sync_cron flag to sync the whole path from remote disk server to local dest directory with cron, like Sync Cron.

The source flag detail see Remote Server Source Protocol.

# Start a remote disk client
# Replace the `users` flag with your real username and password
$ gofs -source="rs://127.0.0.1:8105" -dest=./dest -users="gofs|password"

Remote Push Server

Start a Remote Disk Server as a remote file source, then enable the remote push server with the push_server flag.

Pay attention to that remote push server users must have read and write permission at least, for example, -users="gofs|password|rw".

# Start a remote disk server and enable the remote push server
# Replace the `tls_cert_file` and `tls_key_file` flags with your real cert files in the production environment
# Replace the `users` flag with complex username and password for security
$ gofs -source="rs://127.0.0.1:8105?mode=server&local_sync_disabled=true&path=./source&fs_server=https://127.0.0.1" -dest=./dest -users="gofs|password|rw" -tls_cert_file=cert.pem -tls_key_file=key.pem -push_server

Remote Push Client

Start a remote push client to sync change files to the Remote Push Server.

More flag usage see Remote Disk Client.

# Start a remote push client and enable local disk sync, sync the file changes from source path to the local dest path and the remote push server
# Replace the `users` flag with your real username and password
$ gofs -source="./source" -dest="rs://127.0.0.1:8105?local_sync_disabled=false&path=./dest" -users="gofs|password"

Remote Server Source Protocol

The remote server source protocol is based on URI, see RFC 3986.

Scheme

The scheme name is rs.

Host

The remote server source uses 0.0.0.0 or other local ip address as host in Remote Disk Server mode, and use ip address or domain name as host in Remote Disk Client mode.

Port

The remote server source port, default is 8105.

Parameter

Use the following parameters in Remote Disk Server mode only.

• path the Remote Disk Server actual local source directory
• mode running mode, in Remote Disk Server mode is server, default is running in Remote Disk Client mode
• fs_server File Server address, like https://127.0.0.1
• local_sync_disabled disabled Remote Disk Server sync changes to its local dest path, true or false, default is false

Example

For example, in Remote Disk Server mode.

 rs://127.0.0.1:8105?mode=server&local_sync_disabled=true&path=./source&fs_server=https://127.0.0.1
 \_/  \_______/ \__/ \____________________________________________________________________________/
  |       |       |                                      |
scheme   host    port                                parameter

Profiling

Enable pprof base File Server.

By default, allow to access pprof route by private address and loopback address only.

You can disable it by setting the pprof_private to false.

$ gofs -source=./source -dest=./dest -server -tls_cert_file=cert.pem -tls_key_file=key.pem -rand_user_count=3 -pprof

The pprof url address like this

https://127.0.0.1/debug/pprof/

Logger

Enable the file logger and console logger by default, and you can disable the file logger by setting the log_file flag to false.

Use the log_level flag to set the log level, default is INFO, (DEBUG=0 INFO=1 WARN=2 ERROR=3).

Use the log_dir flag to set the directory of the log file, default is ./logs/.

Use the log_flush flag to enable auto flush log with interval, default is true.

Use the log_flush_interval flag to set the log flush interval duration, default is 3s.

Use the log_event flag to enable the event log, write to file, default is false.

# set the logger config in "Local Disk" mode
$ gofs -source=./source -dest=./dest -log_file -log_level=0 -log_dir="./logs/" -log_flush -log_flush_interval=3s -log_event

For More Information

Help Info

$ gofs -h

Version Info

$ gofs -v

About Info

$ gofs -about

Documentation

Index

• Variables

Variables

var Commit string

Commit the commit file records the last commit hash value, used by release

var Templates embed.FS

Templates the web server templates