gofly

README

gofly

gofly is a small, single binary reimplementation of the essential Flyway commands, written in Go.

It exists because Flyway drags a JVM along. gofly is one static executable of a few megabytes, with no runtime to install, no flyway.conf template to render and no JDBC drivers to download. It starts in milliseconds, which matters when every container start-up runs a migration.

Compatibility with Flyway is not approximate. gofly computes the same checksums, refuses the same databases for the same reasons, writes the same schema history layout, and understands the same command line flags and config files. A database migrated by Flyway can be handed over to gofly, and a database migrated by gofly can still be read by Flyway.

What it does

• Versioned migrations — V1__Description.sql, with every version scheme Flyway supports (1, 001, 5.2, 5.2.1.3, 20260101120000, 1_2 …).
• Undo migrations — U1__Description.sql, undone newest first.
• Repeatable migrations — R__Description.sql, re-run whenever they change.
• Flyway checksums — bit for bit identical, so existing history stays valid.
• Checksum validation — a migration edited after being applied stops everything, with the same message Flyway prints.
• All-or-nothing migrations — -group=true runs the whole batch in one transaction.
• Its own history schema, and a one-off import of an existing Flyway history the first time it runs against a database.
• PostgreSQL, MySQL / MariaDB, SQL Server and SQLite.

Install

go install github.com/pausan/gofly@latest

or build it yourself:

make build          # ./build/gofly
make build-all      # linux, macos and windows, amd64 and arm64
make release-all    # the same, stripped and packed with upx

The binary is built with CGO_ENABLED=0, so it is fully static and the SQLite support needs no system library.

Single database builds

The full binary talks to all four databases and is around 4 MB packed. If you only ever migrate one of them, the releases also carry Linux builds that leave the other three drivers out, at roughly half the size:

Build	Databases	Packed size (amd64)
gofly	all four	4.0 MB
gofly.pg	PostgreSQL	2.4 MB
gofly.sqlite	SQLite	2.2 MB
gofly.mssql	SQL Server	1.9 MB
gofly.mysql	MySQL / MariaDB	1.7 MB

They are the same tool with the same flags and behaviour, they simply refuse a url for a database they were not built with. gofly version prints what a given binary supports. Build them yourself with make build-single, or directly:

go build -tags goflymin,db_pg .            # postgres only
go build -tags goflymin,db_pg,db_sqlite .  # postgres and sqlite

Use

gofly -url=jdbc:postgresql://localhost:5432/mydb \
      -user=admin -password=secret \
      -locations=filesystem:./sql \
      migrate

Commands: migrate, undo, info, validate, baseline, repair. Run gofly with no arguments for the full list of options, or see docs/cli.md.

$ gofly -url=jdbc:sqlite:app.db -locations=filesystem:./sql info

Schema version: 3

+-----------+---------+---------------+------+----------------------+---------+----------+
| Category  | Version | Description   | Type | Installed On         | State   | Undoable |
+-----------+---------+---------------+------+----------------------+---------+----------+
| Versioned | 1       | Create users  | SQL  | 2026-08-29T06:05:24Z | Success | Yes      |
| Versioned | 2       | Add email     | SQL  | 2026-08-29T06:05:24Z | Success | No       |
| Versioned | 3       | Create orders | SQL  |                      | Pending | No       |
+-----------+---------+---------------+------+----------------------+---------+----------+

Configuration

Settings come from four places, each overriding the one before it: built-in defaults, config files, environment variables, then the command line. Full details in docs/configuration.md.

gofly.url=jdbc:mysql://db:3306/artypistdb
gofly.user=root
gofly.password=secret
gofly.locations=filesystem:./setup/sql/artypist/db
gofly.sqlMigrationSeparator=_
gofly.baselineVersion=10

An existing flyway.conf works unchanged: the flyway.* properties and the FLYWAY_* environment variables are still read. They warn that gofly.* is the name to move to, and the two namespaces cannot be mixed — a half-renamed configuration is one nobody can reason about.

Database urls

gofly speaks JDBC urls, so the connection strings from an existing Flyway setup can be copied across verbatim:

Database	URL
PostgreSQL	jdbc:postgresql://host:5432/database
MySQL	jdbc:mysql://host:3306/database
MariaDB	jdbc:mariadb://host:3306/database
SQL Server	jdbc:sqlserver://host:1433;databaseName=database
SQLite	jdbc:sqlite:/path/to/file.db

Taking over from Flyway

Point gofly at a database Flyway has been migrating and run migrate. On that first run gofly:

1. creates its own history table, gofly_schema_history, in its own schema (gofly) where the database has schemas;
2. copies every row of flyway_schema_history into it, checksums, timestamps, installed_by and all;
3. carries on from there.

flyway_schema_history is only ever read, never written to and never dropped, so going back to Flyway stays possible. Pass -importFromFlyway=false to skip the import.

info and validate never import anything. On a database gofly has not taken over yet they read flyway_schema_history directly and say so, so you can check compatibility before committing to the switch:

gofly -url=... -locations=filesystem:./sql validate

Because the checksums are identical, a migration that was edited after Flyway applied it still fails validation afterwards. The import moves the history across, it does not paper over what is wrong with it.

Where the history lives

Database	Default location
PostgreSQL	schema gofly, table gofly_schema_history
SQL Server	schema gofly, table gofly_schema_history
MySQL	alongside your tables, table gofly_schema_history
SQLite	alongside your tables, table gofly_schema_history

On MySQL a schema is a database, so putting the history in one of its own would mean CREATE DATABASE and privileges the migration user rarely has. Set -goflySchema=gofly if you want it anyway. SQLite has no schemas at all.

Both names are configurable with -goflySchema and -table.

Transactions

By default each migration runs in its own transaction, exactly like Flyway: a failure leaves the migrations before it applied and records the failed one, so the next run refuses to start until you repair.

With -group=true the whole batch runs inside a single transaction: either every pending migration is applied, or the database is left untouched and the history stays empty.

This depends on the engine. PostgreSQL, SQL Server and SQLite roll DDL back. MySQL and MariaDB commit implicitly on every DDL statement, so a grouped migration cannot be fully rolled back there; gofly prints a warning rather than pretending otherwise.

What it deliberately does not do

The point is a small tool that does the essentials well, so a number of Flyway features are out of scope: Java and script migrations, callbacks, cherry-pick, dry runs, ignoreMigrationPatterns, locking, and every database beyond the four listed above.

clean is not implemented. Wiping a schema is not a migration, and each of these databases already has a better tool for it.

The full list, with the reasoning, is in docs/compatibility.md.

Documentation

• docs/cli.md — the commands and every option
• docs/configuration.md — config files, environment, namespaces
• docs/migrations.md — naming, versions, checksums, transactions
• docs/compatibility.md — what matches Flyway, what does not, what is left out

Development

make test              # the unit and sqlite tests
make test-coverage     # ... with a coverage report
make test-e2e          # compare against real Flyway on all four databases
make test-integration  # brings up postgres, mysql and sql server in docker
make lint              # gofmt and go vet
make db-down           # stop the throwaway containers

make test-e2e is the one that matters. It runs the same migrations twice against each engine, once with real Flyway in a container and once with gofly, and compares the schema history tables row by row. If gofly ever drifts away from Flyway, that suite fails with a side by side diff. See test/e2e/README.md.

Releases

Pushing to master runs the tests, the compatibility suite and a cross compile, keeping the binaries as build artifacts. Publishing a GitHub release is always a manual decision:

make release VERSION=v0.2.0

or run the Release workflow from the Actions tab. Either way it re-runs everything, then uploads binaries for Linux, macOS and Windows on x86-64 and ARM64, with a SHA256SUMS file.

Licence

MIT License. See LICENSE.

Documentation

Overview

Copyright (C) 2026 Pau Sanchez

gofly, a small single binary reimplementation of the essential Flyway commands, checksum compatible with Flyway itself.