address

package
v0.0.0-...-57b5d92 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Aug 17, 2020 License: MIT Imports: 14 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	NetIDMainnetP2S2  = 0x32
	NetIDTestnetP2SH2 = 0x3A
)

Variables

View Source 
var (
	// ErrChecksumMismatch describes an error where decoding failed due
	// to a bad checksum.
	ErrChecksumMismatch = errors.New("checksum mismatch")

	// ErrUnknownAddressType describes an error where an address can not
	// decoded as a specific address type due to the string encoding
	// begining with an identifier byte unknown to any standard or
	// registered (via chaincfg.Register) network.
	ErrUnknownAddressType = errors.New("unknown address type")

	// ErrAddressCollision describes an error where an address can not
	// be uniquely determined as either a pay-to-pubkey-hash or
	// pay-to-script-hash address since the leading identifier is used for
	// describing both address kinds, but for different networks.  Rather
	// than assuming or defaulting to one or the other, this error is
	// returned and the caller must decide how to decode the address.
	ErrAddressCollision = errors.New("address collision")
)

Functions

func ExtractPkScriptAddrs 

func ExtractPkScriptAddrs(pkScript []byte, chainParams *chaincfg.Params) (btcutil.Address, error)

func IsBech32SegwitPrefix 

func IsBech32SegwitPrefix(prefix string) bool

IsBech32SegwitPrefix returns whether the prefix is a known prefix for segwit addresses on any default or registered network. This is used when decoding an address string into a specific address type.

func IsScriptHashAddrID 

func IsScriptHashAddrID(id byte) bool

IsScriptHashAddrID returns whether the id is an identifier known to prefix a pay-to-script-hash address on any default or registered network. This is used when decoding an address string into a specific address type. It is up to the caller to check both this and IsPubKeyHashAddrID and decide whether an address is a pubkey hash address, script hash address, neither, or undeterminable (if both return true).

func PayToAddrScript 

func PayToAddrScript(addr btcutil.Address) ([]byte, error)

PayToAddrScript creates a new script to pay a transaction output to a the specified address.

Types

type Address 

type Address interface {
	// String returns the string encoding of the transaction output
	// destination.
	//
	// Please note that String differs subtly from EncodeAddress: String
	// will return the value as a string without any conversion, while
	// EncodeAddress may convert destination types (for example,
	// converting pubkeys to P2PKH addresses) before encoding as a
	// payment address string.
	String() string

	// EncodeAddress returns the string encoding of the payment address
	// associated with the Address value.  See the comment on String
	// for how this method differs from String.
	EncodeAddress() string

	// ScriptAddress returns the raw bytes of the address to be used
	// when inserting the address into a txout's script.
	ScriptAddress() []byte

	// IsForNet returns whether or not the address is associated with the
	// passed litecoin network.
	IsForNet(*chaincfg.Params) bool
}

Address is an interface type for any type of destination a transaction output may spend to. This includes pay-to-pubkey (P2PK), pay-to-pubkey-hash (P2PKH), and pay-to-script-hash (P2SH). Address is designed to be generic enough that other kinds of addresses may be added in the future without changing the decoding and encoding API.

func DecodeAddress 

func DecodeAddress(addr string, defaultNet *chaincfg.Params) (Address, error)

DecodeAddress decodes the string encoding of an address and returns the Address if addr is a valid encoding for a known address type.

The litecoin network the address is associated with is extracted if possible. When the address does not encode the network, such as in the case of a raw public key, the address will be associated with the passed defaultNet.

type AddressPubKey 

type AddressPubKey struct {
	// contains filtered or unexported fields
}

AddressPubKey is an Address for a pay-to-pubkey transaction.

func NewAddressPubKey 

func NewAddressPubKey(serializedPubKey []byte, net *chaincfg.Params) (*AddressPubKey, error)

NewAddressPubKey returns a new AddressPubKey which represents a pay-to-pubkey address. The serializedPubKey parameter must be a valid pubkey and can be uncompressed, compressed, or hybrid.

func (*AddressPubKey) AddressPubKeyHash 

func (a *AddressPubKey) AddressPubKeyHash() *AddressPubKeyHash

AddressPubKeyHash returns the pay-to-pubkey address converted to a pay-to-pubkey-hash address. Note that the public key format (uncompressed, compressed, etc) will change the resulting address. This is expected since pay-to-pubkey-hash is a hash of the serialized public key which obviously differs with the format. At the time of this writing, most Bitcoin addresses are pay-to-pubkey-hash constructed from the uncompressed public key.

func (*AddressPubKey) EncodeAddress 

func (a *AddressPubKey) EncodeAddress() string

EncodeAddress returns the string encoding of the public key as a pay-to-pubkey-hash. Note that the public key format (uncompressed, compressed, etc) will change the resulting address. This is expected since pay-to-pubkey-hash is a hash of the serialized public key which obviously differs with the format. At the time of this writing, most Bitcoin addresses are pay-to-pubkey-hash constructed from the uncompressed public key.

Part of the Address interface.

func (*AddressPubKey) Format 

func (a *AddressPubKey) Format() PubKeyFormat

Format returns the format (uncompressed, compressed, etc) of the pay-to-pubkey address.

func (*AddressPubKey) IsForNet 

func (a *AddressPubKey) IsForNet(net *chaincfg.Params) bool

IsForNet returns whether or not the pay-to-pubkey address is associated with the passed litecoin network.

func (*AddressPubKey) PubKey 

func (a *AddressPubKey) PubKey() *btcec.PublicKey

PubKey returns the underlying public key for the address.

func (*AddressPubKey) ScriptAddress 

func (a *AddressPubKey) ScriptAddress() []byte

ScriptAddress returns the bytes to be included in a txout script to pay to a public key. Setting the public key format will affect the output of this function accordingly. Part of the Address interface.

func (*AddressPubKey) SetFormat 

func (a *AddressPubKey) SetFormat(pkFormat PubKeyFormat)

SetFormat sets the format (uncompressed, compressed, etc) of the pay-to-pubkey address.

func (*AddressPubKey) String 

func (a *AddressPubKey) String() string

String returns the hex-encoded human-readable string for the pay-to-pubkey address. This is not the same as calling EncodeAddress.

type AddressPubKeyHash 

type AddressPubKeyHash struct {
	// contains filtered or unexported fields
}

AddressPubKeyHash is an Address for a pay-to-pubkey-hash (P2PKH) transaction.

func NewAddressPubKeyHash 

func NewAddressPubKeyHash(pkHash []byte, net *chaincfg.Params) (*AddressPubKeyHash, error)

NewAddressPubKeyHash returns a new AddressPubKeyHash. pkHash mustbe 20 bytes.

func (*AddressPubKeyHash) EncodeAddress 

func (a *AddressPubKeyHash) EncodeAddress() string

EncodeAddress returns the string encoding of a pay-to-pubkey-hash address. Part of the Address interface.

func (*AddressPubKeyHash) Hash160 

func (a *AddressPubKeyHash) Hash160() *[ripemd160.Size]byte

Hash160 returns the underlying array of the pubkey hash. This can be useful when an array is more appropiate than a slice (for example, when used as map keys).

func (*AddressPubKeyHash) IsForNet 

func (a *AddressPubKeyHash) IsForNet(net *chaincfg.Params) bool

IsForNet returns whether or not the pay-to-pubkey-hash address is associated with the passed litecoin network.

func (*AddressPubKeyHash) ScriptAddress 

func (a *AddressPubKeyHash) ScriptAddress() []byte

ScriptAddress returns the bytes to be included in a txout script to pay to a pubkey hash. Part of the Address interface.

func (*AddressPubKeyHash) String 

func (a *AddressPubKeyHash) String() string

String returns a human-readable string for the pay-to-pubkey-hash address. This is equivalent to calling EncodeAddress, but is provided so the type can be used as a fmt.Stringer.

type AddressScriptHash 

type AddressScriptHash struct {
	// contains filtered or unexported fields
}

AddressScriptHash is an Address for a pay-to-script-hash (P2SH) transaction.

func NewAddressScriptHash 

func NewAddressScriptHash(serializedScript []byte, net *chaincfg.Params) (*AddressScriptHash, error)

NewAddressScriptHash returns a new AddressScriptHash.

func NewAddressScriptHashFromHash 

func NewAddressScriptHashFromHash(scriptHash []byte, net *chaincfg.Params) (*AddressScriptHash, error)

NewAddressScriptHashFromHash returns a new AddressScriptHash. scriptHash must be 20 bytes.

func (*AddressScriptHash) EncodeAddress 

func (a *AddressScriptHash) EncodeAddress() string

EncodeAddress returns the string encoding of a pay-to-script-hash address. Part of the Address interface.

func (*AddressScriptHash) Hash160 

func (a *AddressScriptHash) Hash160() *[ripemd160.Size]byte

Hash160 returns the underlying array of the script hash. This can be useful when an array is more appropiate than a slice (for example, when used as map keys).

func (*AddressScriptHash) IsForNet 

func (a *AddressScriptHash) IsForNet(net *chaincfg.Params) bool

IsForNet returns whether or not the pay-to-script-hash address is associated with the passed litecoin network.

func (*AddressScriptHash) ScriptAddress 

func (a *AddressScriptHash) ScriptAddress() []byte

ScriptAddress returns the bytes to be included in a txout script to pay to a script hash. Part of the Address interface.

func (*AddressScriptHash) String 

func (a *AddressScriptHash) String() string

String returns a human-readable string for the pay-to-script-hash address. This is equivalent to calling EncodeAddress, but is provided so the type can be used as a fmt.Stringer.

type AddressWitnessPubKeyHash 

type AddressWitnessPubKeyHash struct {
	// contains filtered or unexported fields
}

AddressWitnessPubKeyHash is an Address for a pay-to-witness-pubkey-hash (P2WPKH) output. See BIP 173 for further details regarding native segregated witness address encoding: https://github.com/litecoin/bips/blob/master/bip-0173.mediawiki

func NewAddressWitnessPubKeyHash 

func NewAddressWitnessPubKeyHash(witnessProg []byte, net *chaincfg.Params) (*AddressWitnessPubKeyHash, error)

NewAddressWitnessPubKeyHash returns a new AddressWitnessPubKeyHash.

func (*AddressWitnessPubKeyHash) EncodeAddress 

func (a *AddressWitnessPubKeyHash) EncodeAddress() string

EncodeAddress returns the bech32 string encoding of an AddressWitnessPubKeyHash. Part of the Address interface.

func (*AddressWitnessPubKeyHash) Hash160 

func (a *AddressWitnessPubKeyHash) Hash160() *[20]byte

Hash160 returns the witness program of the AddressWitnessPubKeyHash as a byte array.

func (*AddressWitnessPubKeyHash) Hrp 

func (a *AddressWitnessPubKeyHash) Hrp() string

Hrp returns the human-readable part of the bech32 encoded AddressWitnessPubKeyHash.

func (*AddressWitnessPubKeyHash) IsForNet 

func (a *AddressWitnessPubKeyHash) IsForNet(net *chaincfg.Params) bool

IsForNet returns whether or not the AddressWitnessPubKeyHash is associated with the passed litecoin network. Part of the Address interface.

func (*AddressWitnessPubKeyHash) ScriptAddress 

func (a *AddressWitnessPubKeyHash) ScriptAddress() []byte

ScriptAddress returns the witness program for this address. Part of the Address interface.

func (*AddressWitnessPubKeyHash) String 

func (a *AddressWitnessPubKeyHash) String() string

String returns a human-readable string for the AddressWitnessPubKeyHash. This is equivalent to calling EncodeAddress, but is provided so the type can be used as a fmt.Stringer. Part of the Address interface.

func (*AddressWitnessPubKeyHash) WitnessProgram 

func (a *AddressWitnessPubKeyHash) WitnessProgram() []byte

WitnessProgram returns the witness program of the AddressWitnessPubKeyHash.

func (*AddressWitnessPubKeyHash) WitnessVersion 

func (a *AddressWitnessPubKeyHash) WitnessVersion() byte

WitnessVersion returns the witness version of the AddressWitnessPubKeyHash.

type AddressWitnessScriptHash 

type AddressWitnessScriptHash struct {
	// contains filtered or unexported fields
}

AddressWitnessScriptHash is an Address for a pay-to-witness-script-hash (P2WSH) output. See BIP 173 for further details regarding native segregated witness address encoding: https://github.com/litecoin/bips/blob/master/bip-0173.mediawiki

func NewAddressWitnessScriptHash 

func NewAddressWitnessScriptHash(witnessProg []byte, net *chaincfg.Params) (*AddressWitnessScriptHash, error)

NewAddressWitnessScriptHash returns a new AddressWitnessPubKeyHash.

func (*AddressWitnessScriptHash) EncodeAddress 

func (a *AddressWitnessScriptHash) EncodeAddress() string

EncodeAddress returns the bech32 string encoding of an AddressWitnessScriptHash. Part of the Address interface.

func (*AddressWitnessScriptHash) Hrp 

func (a *AddressWitnessScriptHash) Hrp() string

Hrp returns the human-readable part of the bech32 encoded AddressWitnessScriptHash.

func (*AddressWitnessScriptHash) IsForNet 

func (a *AddressWitnessScriptHash) IsForNet(net *chaincfg.Params) bool

IsForNet returns whether or not the AddressWitnessScriptHash is associated with the passed litecoin network. Part of the Address interface.

func (*AddressWitnessScriptHash) ScriptAddress 

func (a *AddressWitnessScriptHash) ScriptAddress() []byte

ScriptAddress returns the witness program for this address. Part of the Address interface.

func (*AddressWitnessScriptHash) String 

func (a *AddressWitnessScriptHash) String() string

String returns a human-readable string for the AddressWitnessScriptHash. This is equivalent to calling EncodeAddress, but is provided so the type can be used as a fmt.Stringer. Part of the Address interface.

func (*AddressWitnessScriptHash) WitnessProgram 

func (a *AddressWitnessScriptHash) WitnessProgram() []byte

WitnessProgram returns the witness program of the AddressWitnessScriptHash.

func (*AddressWitnessScriptHash) WitnessVersion 

func (a *AddressWitnessScriptHash) WitnessVersion() byte

WitnessVersion returns the witness version of the AddressWitnessScriptHash.

type PubKeyFormat 

type PubKeyFormat int

PubKeyFormat describes what format to use for a pay-to-pubkey address. 

const (
	// PKFUncompressed indicates the pay-to-pubkey address format is an
	// uncompressed public key.
	PKFUncompressed PubKeyFormat = iota

	// PKFCompressed indicates the pay-to-pubkey address format is a
	// compressed public key.
	PKFCompressed

	// PKFHybrid indicates the pay-to-pubkey address format is a hybrid
	// public key.
	PKFHybrid
)

type UnsupportedWitnessProgLenError 

type UnsupportedWitnessProgLenError int

UnsupportedWitnessProgLenError describes an error where a segwit address being decoded has an unsupported witness program length.

func (UnsupportedWitnessProgLenError) Error 

func (e UnsupportedWitnessProgLenError) Error() string

type UnsupportedWitnessVerError 

type UnsupportedWitnessVerError byte

UnsupportedWitnessVerError describes an error where a segwit address being decoded has an unsupported witness version.

func (UnsupportedWitnessVerError) Error 

func (e UnsupportedWitnessVerError) Error() string

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.