wire

package
v0.0.0-...-139b6cb Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Jan 18, 2021 License: ISC Imports: 14 Imported by: 70

README

wire

Build Status ISC License GoDoc

Package wire implements the Decred wire protocol. A comprehensive suite of tests with 100% test coverage is provided to ensure proper functionality.

This package has intentionally been designed so it can be used as a standalone package for any projects needing to interface with Decred peers at the wire protocol level.

Installation and Updating

$ go get -u github.com/decred/dcrd/wire

Decred Message Overview

The Decred protocol consists of exchanging messages between peers. Each message is preceded by a header which identifies information about it such as which decred network it is a part of, its type, how big it is, and a checksum to verify validity. All encoding and decoding of message headers is handled by this package.

To accomplish this, there is a generic interface for Decred messages named Message which allows messages of any type to be read, written, or passed around through channels, functions, etc. In addition, concrete implementations of most of the currently supported Decred messages are provided. For these supported messages, all of the details of marshalling and unmarshalling to and from the wire using Decred encoding are handled so the caller doesn't have to concern themselves with the specifics.

Reading Messages Example

In order to unmarshal Decred messages from the wire, use the ReadMessage function. It accepts any io.Reader, but typically this will be a net.Conn to a remote node running a Decred peer. Example syntax is:

	// Use the most recent protocol version supported by the package and the
	// main Decred network.
	pver := wire.ProtocolVersion
	dcrnet := wire.MainNet

	// Reads and validates the next Decred message from conn using the
	// protocol version pver and the Decred network dcrnet.  The returns
	// are a wire.Message, a []byte which contains the unmarshalled
	// raw payload, and a possible error.
	msg, rawPayload, err := wire.ReadMessage(conn, pver, dcrnet)
	if err != nil {
		// Log and handle the error
	}

See the package documentation for details on determining the message type.

Writing Messages Example

In order to marshal Decred messages to the wire, use the WriteMessage function. It accepts any io.Writer, but typically this will be a net.Conn to a remote node running a Decred peer. Example syntax to request addresses from a remote peer is:

	// Use the most recent protocol version supported by the package and the
	// main Decred network.
	pver := wire.ProtocolVersion
	dcrnet := wire.MainNet

	// Create a new getaddr Decred message.
	msg := wire.NewMsgGetAddr()

	// Writes a Decred message msg to conn using the protocol version
	// pver, and the Decred network dcrnet.  The return is a possible
	// error.
	err := wire.WriteMessage(conn, msg, pver, dcrnet)
	if err != nil {
		// Log and handle the error
	}

License

Package wire is licensed under the copyfree ISC License.

Documentation

Overview

Package wire implements the Decred wire protocol.

For the complete details of the Decred protocol, see the official wiki entry at https://en.bitcoin.it/wiki/Protocol_specification. The following only serves as a quick overview to provide information on how to use the package.

At a high level, this package provides support for marshalling and unmarshalling supported Decred messages to and from the wire. This package does not deal with the specifics of message handling such as what to do when a message is received. This provides the caller with a high level of flexibility.

Decred Message Overview

The Decred protocol consists of exchanging messages between peers. Each message is preceded by a header which identifies information about it such as which Decred network it is a part of, its type, how big it is, and a checksum to verify validity. All encoding and decoding of message headers is handled by this package.

To accomplish this, there is a generic interface for Decred messages named Message which allows messages of any type to be read, written, or passed around through channels, functions, etc. In addition, concrete implementations of most of the currently supported Decred messages are provided. For these supported messages, all of the details of marshalling and unmarshalling to and from the wire using Decred encoding are handled so the caller doesn't have to concern themselves with the specifics.

Message Interaction

The following provides a quick summary of how the Decred messages are intended to interact with one another. As stated above, these interactions are not directly handled by this package. For more in-depth details about the appropriate interactions, see the official Decred protocol wiki entry at https://en.bitcoin.it/wiki/Protocol_specification.

The initial handshake consists of two peers sending each other a version message (MsgVersion) followed by responding with a verack message (MsgVerAck). Both peers use the information in the version message (MsgVersion) to negotiate things such as protocol version and supported services with each other. Once the initial handshake is complete, the following chart indicates message interactions in no particular order. 

Peer A Sends                          Peer B Responds
----------------------------------------------------------------------------
getaddr message (MsgGetAddr)          addr message (MsgAddr)
getblocks message (MsgGetBlocks)      inv message (MsgInv)
inv message (MsgInv)                  getdata message (MsgGetData)
getdata message (MsgGetData)          block message (MsgBlock) -or-
                                      tx message (MsgTx) -or-
                                      notfound message (MsgNotFound)
getheaders message (MsgGetHeaders)    headers message (MsgHeaders)
ping message (MsgPing)                pong message (MsgHeaders)* -or-
                                      (none -- Ability to send message is enough)

NOTES:
* The pong message was not added until later protocol versions as defined
  in BIP0031.  The BIP0031Version constant can be used to detect a recent
  enough protocol version for this purpose (version > BIP0031Version).

Common Parameters

There are several common parameters that arise when using this package to read and write Decred messages. The following sections provide a quick overview of these parameters so the next sections can build on them.

Protocol Version

The protocol version should be negotiated with the remote peer at a higher level than this package via the version (MsgVersion) message exchange, however, this package provides the wire.ProtocolVersion constant which indicates the latest protocol version this package supports and is typically the value to use for all outbound connections before a potentially lower protocol version is negotiated.

Decred Network

The Decred network is a magic number which is used to identify the start of a message and which Decred network the message applies to. This package provides the following constants: 

    wire.PicfightCoinWire
	wire.DecredWire
	wire.TestNet3 (Test network version 3)
	wire.SimNet   (Simulation test network)
	wire.RegNet   (Regression test network)

Determining Message Type

As discussed in the Decred message overview section, this package reads and writes Decred messages using a generic interface named Message. In order to determine the actual concrete type of the message, use a type switch or type assertion. An example of a type switch follows: 

// Assumes msg is already a valid concrete message such as one created
// via NewMsgVersion or read via ReadMessage.
switch msg := msg.(type) {
case *wire.MsgVersion:
	// The message is a pointer to a MsgVersion struct.
	fmt.Printf("Protocol version: %v", msg.ProtocolVersion)
case *wire.MsgBlock:
	// The message is a pointer to a MsgBlock struct.
	fmt.Printf("Number of tx in block: %v", msg.Header.TxnCount)
}

Reading Messages

In order to unmarshall Decred messages from the wire, use the ReadMessage function. It accepts any io.Reader, but typically this will be a net.Conn to a remote node running a Decred peer. Example syntax is: 

// Reads and validates the next Decred message from conn using the
// protocol version pver and the Decred network btcnet.  The returns
// are a wire.Message, a []byte which contains the unmarshalled
// raw payload, and a possible error.
msg, rawPayload, err := wire.ReadMessage(conn, pver, btcnet)
if err != nil {
	// Log and handle the error
}

Writing Messages

In order to marshall Decred messages to the wire, use the WriteMessage function. It accepts any io.Writer, but typically this will be a net.Conn to a remote node running a Decred peer. Example syntax to request addresses from a remote peer is: 

// Create a new getaddr Decred message.
msg := wire.NewMsgGetAddr()

// Writes a Decred message msg to conn using the protocol version
// pver, and the Decred network btcnet.  The return is a possible
// error.
err := wire.WriteMessage(conn, msg, pver, btcnet)
if err != nil {
	// Log and handle the error
}

Errors

Errors returned by this package are either the raw errors provided by underlying calls to read/write from streams such as io.EOF, io.ErrUnexpectedEOF, and io.ErrShortWrite, or of type wire.MessageError. This allows the caller to differentiate between general IO errors and malformed messages through type assertions.

Bitcoin Improvement Proposals

This package includes spec changes outlined by the following BIPs: 

BIP0014 (https://github.com/bitcoin/bips/blob/master/bip-0014.mediawiki)
BIP0031 (https://github.com/bitcoin/bips/blob/master/bip-0031.mediawiki)
BIP0035 (https://github.com/bitcoin/bips/blob/master/bip-0035.mediawiki)
BIP0037 (https://github.com/bitcoin/bips/blob/master/bip-0037.mediawiki)
BIP0111	(https://github.com/bitcoin/bips/blob/master/bip-0111.mediawiki)
BIP0130 (https://github.com/bitcoin/bips/blob/master/bip-0130.mediawiki)
BIP0133 (https://github.com/bitcoin/bips/blob/master/bip-0133.mediawiki)

Index

Constants

View Source 
const (
	CmdVersion        = "version"
	CmdVerAck         = "verack"
	CmdGetAddr        = "getaddr"
	CmdAddr           = "addr"
	CmdGetBlocks      = "getblocks"
	CmdInv            = "inv"
	CmdGetData        = "getdata"
	CmdNotFound       = "notfound"
	CmdBlock          = "block"
	CmdTx             = "tx"
	CmdGetHeaders     = "getheaders"
	CmdHeaders        = "headers"
	CmdPing           = "ping"
	CmdPong           = "pong"
	CmdMemPool        = "mempool"
	CmdMiningState    = "miningstate"
	CmdGetMiningState = "getminings"
	CmdReject         = "reject"
	CmdSendHeaders    = "sendheaders"
	CmdFeeFilter      = "feefilter"
	CmdGetCFilter     = "getcfilter"
	CmdGetCFHeaders   = "getcfheaders"
	CmdGetCFTypes     = "getcftypes"
	CmdCFilter        = "cfilter"
	CmdCFHeaders      = "cfheaders"
	CmdCFTypes        = "cftypes"
)

Commands used in message headers which describe the type of message.

View Source 
const (
	// MaxCFHeaderPayload is the maximum byte size of a committed
	// filter header.
	MaxCFHeaderPayload = chainhash.HashSize

	// MaxCFHeadersPerMsg is the maximum number of committed filter headers
	// that can be in a single cfheaders message.
	MaxCFHeadersPerMsg = 2000
)
View Source 
const (
	// TxVersion is the current latest supported transaction version.
	TxVersion uint16 = 1

	// MaxTxInSequenceNum is the maximum sequence number the sequence field
	// of a transaction input can be.
	MaxTxInSequenceNum uint32 = 0xffffffff

	// MaxPrevOutIndex is the maximum index the index field of a previous
	// outpoint can be.
	MaxPrevOutIndex uint32 = 0xffffffff

	// NoExpiryValue is the value of expiry that indicates the transaction
	// has no expiry.
	NoExpiryValue uint32 = 0

	// NullValueIn is a null value for an input witness.
	NullValueIn int64 = -1

	// NullBlockHeight is the null value for an input witness. It references
	// the genesis block.
	NullBlockHeight uint32 = 0x00000000

	// NullBlockIndex is the null transaction index in a block for an input
	// witness.
	NullBlockIndex uint32 = 0xffffffff

	// DefaultPkScriptVersion is the default pkScript version, referring to
	// extended Decred script.
	DefaultPkScriptVersion uint16 = 0x0000

	// TxTreeUnknown is the value returned for a transaction tree that is
	// unknown.  This is typically because the transaction has not been
	// inserted into a block yet.
	TxTreeUnknown int8 = -1

	// TxTreeRegular is the value for a normal transaction tree for a
	// transaction's location in a block.
	TxTreeRegular int8 = 0

	// TxTreeStake is the value for a stake transaction tree for a
	// transaction's location in a block.
	TxTreeStake int8 = 1

	// SequenceLockTimeDisabled is a flag that if set on a transaction
	// input's sequence number, the sequence number will not be interpreted
	// as a relative locktime.
	SequenceLockTimeDisabled = 1 << 31

	// SequenceLockTimeIsSeconds is a flag that if set on a transaction
	// input's sequence number, the relative locktime has units of 512
	// seconds.
	SequenceLockTimeIsSeconds = 1 << 22

	// SequenceLockTimeMask is a mask that extracts the relative locktime
	// when masked against the transaction input sequence number.
	SequenceLockTimeMask = 0x0000ffff

	// SequenceLockTimeGranularity is the defined time based granularity
	// for seconds-based relative time locks.  When converting from seconds
	// to a sequence number, the value is right shifted by this amount,
	// therefore the granularity of relative time locks in 512 or 2^9
	// seconds.  Enforced relative lock times are multiples of 512 seconds.
	SequenceLockTimeGranularity = 9
)
View Source 
const (
	// InitialProcotolVersion is the initial protocol version for the
	// network.
	InitialProcotolVersion uint32 = 1

	// ProtocolVersion is the latest protocol version this package supports.
	ProtocolVersion uint32 = 6

	// NodeBloomVersion is the protocol version which added the SFNodeBloom
	// service flag (unused).
	NodeBloomVersion uint32 = 2

	// SendHeadersVersion is the protocol version which added a new
	// sendheaders message.
	SendHeadersVersion uint32 = 3

	// MaxBlockSizeVersion is the protocol version which increased the
	// original blocksize.
	MaxBlockSizeVersion uint32 = 4

	// FeeFilterVersion is the protocol version which added a new
	// feefilter message.
	FeeFilterVersion uint32 = 5

	// NodeCFVersion is the protocol version which adds the SFNodeCF service
	// flag and the cfheaders, cfilter, cftypes, getcfheaders, getcfilter and
	// getcftypes messages.
	NodeCFVersion uint32 = 6
)
View Source 
const CommandSize = 12

CommandSize is the fixed size of all commands in the common Decred message header. Shorter commands must be zero padded.

View Source 
const DefaultUserAgent = "/dcrwire:0.3.0/"

DefaultUserAgent for wire in the stack

View Source 
const MaxAddrPerMsg = 1000

MaxAddrPerMsg is the maximum number of addresses that can be in a single bitcoin addr message (MsgAddr).

View Source 
const MaxBlockHeaderPayload = 84 + (chainhash.HashSize * 3)

MaxBlockHeaderPayload is the maximum number of bytes a block header can be. Version 4 bytes + PrevBlock 32 bytes + MerkleRoot 32 bytes + StakeRoot 32 bytes + VoteBits 2 bytes + FinalState 6 bytes + Voters 2 bytes + FreshStake 1 byte + Revocations 1 bytes + PoolSize 4 bytes + Bits 4 bytes + SBits 8 bytes + Height 4 bytes + Size 4 bytes + Timestamp 4 bytes + Nonce 4 bytes + ExtraData 32 bytes + StakeVersion 4 bytes. --> Total 180 bytes.

View Source 
const MaxBlockHeadersPerMsg = 2000

MaxBlockHeadersPerMsg is the maximum number of block headers that can be in a single Decred headers message.

View Source 
const MaxBlockLocatorsPerMsg = 500

MaxBlockLocatorsPerMsg is the maximum number of block locator hashes allowed per message.

View Source 
const MaxBlockPayload = 1310720 // 1.25MB

MaxBlockPayload is the maximum bytes a block message can be in bytes.

View Source 
const MaxBlockPayloadV3 = 1000000 // Not actually 1MB which would be 1024 * 1024

MaxBlockPayloadV3 is the maximum bytes a block message can be in bytes as of version 3 of the protocol.

View Source 
const MaxBlocksPerMsg = 500

MaxBlocksPerMsg is the maximum number of blocks allowed per message.

View Source 
const (
	// MaxCFilterDataSize is the maximum byte size of a committed filter.
	// The maximum size is currently defined as 256KiB.
	MaxCFilterDataSize = 256 * 1024
)
View Source 
const MaxFilterTypesPerMsg = 256

MaxFilterTypesPerMsg is the maximum number of filter types allowed per message.

View Source 
const (
	// MaxInvPerMsg is the maximum number of inventory vectors that can be in a
	// single Decred inv message.
	MaxInvPerMsg = 50000
)
View Source 
const MaxMSBlocksAtHeadPerMsg = 8

MaxMSBlocksAtHeadPerMsg is the maximum number of block hashes allowed per message.

View Source 
const MaxMSVotesAtHeadPerMsg = 40 // 8 * 5

MaxMSVotesAtHeadPerMsg is the maximum number of votes at head per message.

View Source 
const MaxMessagePayload = (1024 * 1024 * 32) // 32MB

MaxMessagePayload is the maximum bytes a message can be regardless of other individual limits imposed by messages themselves.

View Source 
const MaxUserAgentLen = 256

MaxUserAgentLen is the maximum allowed length for the user agent field in a version message (MsgVersion).

View Source 
const (
	// MaxVarIntPayload is the maximum payload size for a variable length integer.
	MaxVarIntPayload = 9
)
View Source 
const MessageHeaderSize = 24

MessageHeaderSize is the number of bytes in a Decred message header. Decred network (magic) 4 bytes + command 12 bytes + payload length 4 bytes + checksum 4 bytes.

Variables

View Source 
var ErrInvalidNetAddr = errors.New("provided net.Addr is not a net.TCPAddr")

ErrInvalidNetAddr describes an error that indicates the caller didn't specify a TCP address as required.

Functions

func MaxTxPerTxTree 

func MaxTxPerTxTree(pver uint32) uint64

MaxTxPerTxTree returns the maximum number of transactions that could possibly fit into a block per each merkle root for the given protocol version.

func RandomUint64 

func RandomUint64() (uint64, error)

RandomUint64 returns a cryptographically random uint64 value.

func ReadOutPoint 

func ReadOutPoint(r io.Reader, pver uint32, version uint16, op *OutPoint) error

ReadOutPoint reads the next sequence of bytes from r as an OutPoint.

func ReadVarBytes 

func ReadVarBytes(r io.Reader, pver uint32, maxAllowed uint32,
	fieldName string) ([]byte, error)

ReadVarBytes reads a variable length byte array. A byte array is encoded as a varInt containing the length of the array followed by the bytes themselves. An error is returned if the length is greater than the passed maxAllowed parameter which helps protect against memory exhaustion attacks and forced panics thorugh malformed messages. The fieldName parameter is only used for the error message so it provides more context in the error.

func ReadVarInt 

func ReadVarInt(r io.Reader, pver uint32) (uint64, error)

ReadVarInt reads a variable length integer from r and returns it as a uint64.

func ReadVarString 

func ReadVarString(r io.Reader, pver uint32) (string, error)

ReadVarString reads a variable length string from r and returns it as a Go string. A variable length string is encoded as a variable length integer containing the length of the string followed by the bytes that represent the string itself. An error is returned if the length is greater than the maximum block payload size since it helps protect against memory exhaustion attacks and forced panics through malformed messages.

func VarIntSerializeSize 

func VarIntSerializeSize(val uint64) int

VarIntSerializeSize returns the number of bytes it would take to serialize val as a variable length integer.

func WriteMessage 

func WriteMessage(w io.Writer, msg Message, pver uint32, dcrnet CurrencyNet) error

WriteMessage writes a Decred Message to w including the necessary header information. This function is the same as WriteMessageN except it doesn't doesn't return the number of bytes written. This function is mainly provided for backwards compatibility with the original API, but it's also useful for callers that don't care about byte counts.

func WriteMessageN 

func WriteMessageN(w io.Writer, msg Message, pver uint32, dcrnet CurrencyNet) (int, error)

WriteMessageN writes a Decred Message to w including the necessary header information and returns the number of bytes written. This function is the same as WriteMessage except it also returns the number of bytes written.

func WriteOutPoint 

func WriteOutPoint(w io.Writer, pver uint32, version uint16, op *OutPoint) error

WriteOutPoint encodes op to the Decred protocol encoding for an OutPoint to w.

func WriteVarBytes 

func WriteVarBytes(w io.Writer, pver uint32, bytes []byte) error

WriteVarBytes serializes a variable length byte array to w as a varInt containing the number of bytes, followed by the bytes themselves.

func WriteVarInt 

func WriteVarInt(w io.Writer, pver uint32, val uint64) error

WriteVarInt serializes val to w using a variable number of bytes depending on its value.

func WriteVarString 

func WriteVarString(w io.Writer, pver uint32, str string) error

WriteVarString serializes str to w as a variable length integer containing the length of the string followed by the bytes that represent the string itself.

Types

type BlockHeader 

type BlockHeader struct {
	// Version of the block.  This is not the same as the protocol version.
	Version int32

	// Hash of the previous block in the block chain.
	PrevBlock chainhash.Hash

	// Merkle tree reference to hash of all transactions for the block.
	MerkleRoot chainhash.Hash

	// Merkle tree reference to hash of all stake transactions for the block.
	StakeRoot chainhash.Hash

	// Votes on the previous merkleroot and yet undecided parameters.
	VoteBits uint16

	// Final state of the PRNG used for ticket selection in the lottery.
	FinalState [6]byte

	// Number of participating voters for this block.
	Voters uint16

	// Number of new sstx in this block.
	FreshStake uint8

	// Number of ssrtx present in this block.
	Revocations uint8

	// Size of the ticket pool.
	PoolSize uint32

	// Difficulty target for the block.
	Bits uint32

	// Stake difficulty target.
	SBits int64

	// Height is the block height in the block chain.
	Height uint32

	// Size is the size of the serialized block in its entirety.
	Size uint32

	// Time the block was created.  This is, unfortunately, encoded as a
	// uint32 on the wire and therefore is limited to 2106.
	Timestamp time.Time

	// Nonce is technically a part of ExtraData, but we use it as the
	// classical 4-byte nonce here.
	Nonce uint32

	// ExtraData is used to encode the nonce or any other extra data
	// that might be used later on in consensus.
	ExtraData [32]byte

	// StakeVersion used for voting.
	StakeVersion uint32
}

BlockHeader defines information about a block and is used in the decred block (MsgBlock) and headers (MsgHeaders) messages.

func NewBlockHeader 

func NewBlockHeader(version int32, prevHash *chainhash.Hash,
	merkleRootHash *chainhash.Hash, stakeRoot *chainhash.Hash, voteBits uint16,
	finalState [6]byte, voters uint16, freshStake uint8, revocations uint8,
	poolsize uint32, bits uint32, sbits int64, height uint32, size uint32,
	nonce uint32, extraData [32]byte, stakeVersion uint32) *BlockHeader

NewBlockHeader returns a new BlockHeader using the provided previous block hash, merkle root hash, difficulty bits, and nonce used to generate the block with defaults for the remaining fields.

func (*BlockHeader) BlockHash 

func (h *BlockHeader) BlockHash() chainhash.Hash

BlockHash computes the block identifier hash for the given block header.

func (*BlockHeader) BtcDecode 

func (h *BlockHeader) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the bitcoin protocol encoding into the receiver. This is part of the Message interface implementation. See Deserialize for decoding block headers stored to disk, such as in a database, as opposed to decoding block headers from the wire.

func (*BlockHeader) BtcEncode 

func (h *BlockHeader) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the bitcoin protocol encoding. This is part of the Message interface implementation. See Serialize for encoding block headers to be stored to disk, such as in a database, as opposed to encoding block headers for the wire.

func (*BlockHeader) Bytes 

func (h *BlockHeader) Bytes() ([]byte, error)

Bytes returns a byte slice containing the serialized contents of the block header.

func (*BlockHeader) Deserialize 

func (h *BlockHeader) Deserialize(r io.Reader) error

Deserialize decodes a block header from r into the receiver using a format that is suitable for long-term storage such as a database while respecting the Version field.

func (*BlockHeader) FromBytes 

func (h *BlockHeader) FromBytes(b []byte) error

FromBytes deserializes a block header byte slice.

func (*BlockHeader) Serialize 

func (h *BlockHeader) Serialize(w io.Writer) error

Serialize encodes a block header from r into the receiver using a format that is suitable for long-term storage such as a database while respecting the Version field.

type CurrencyNet 

type CurrencyNet uint32

CurrencyNet represents which Decred network a message belongs to. 

const (
	// DecredWire represents the main Decred network.
	DecredWire CurrencyNet = 0xd9b400f9

	PicfightCoinWire = CurrencyNet(picfightcoin.PicfightCoinWire)

	// RegNet represents the regression test network.
	RegNet CurrencyNet = 0xdab500fa

	// RegTest represents the regression test network.
	//
	// DEPRECATED.  This will be removed in the next major version bump.
	// Use Regnet instead.
	RegTest CurrencyNet = RegNet

	// TestNet3 represents the 3rd test network.
	TestNet3 CurrencyNet = 0xb194aa75

	// SimNet represents the simulation test network.
	SimNet CurrencyNet = 0x12141c16
)

Constants used to indicate the message Decred network. They can also be used to seek to the next message when a stream's state is unknown, but this package does not provide that functionality since it's generally a better idea to simply disconnect clients that are misbehaving over TCP.

func (CurrencyNet) String 

func (n CurrencyNet) String() string

String returns the CurrencyNet in human-readable form.

type FilterType 

type FilterType uint8

FilterType is used to represent a filter type. 

const (
	// GCSFilterRegular is the regular filter type.
	GCSFilterRegular FilterType = iota

	// GCSFilterExtended is the extended filter type.
	GCSFilterExtended
)

type InvType 

type InvType uint32

InvType represents the allowed types of inventory vectors. See InvVect. 

const (
	InvTypeError         InvType = 0
	InvTypeTx            InvType = 1
	InvTypeBlock         InvType = 2
	InvTypeFilteredBlock InvType = 3
)

These constants define the various supported inventory vector types.

func (InvType) String 

func (invtype InvType) String() string

String returns the InvType in human-readable form.

type InvVect 

type InvVect struct {
	Type InvType        // Type of data
	Hash chainhash.Hash // Hash of the data
}

InvVect defines a Decred inventory vector which is used to describe data, as specified by the Type field, that a peer wants, has, or does not have to another peer.

func NewInvVect 

func NewInvVect(typ InvType, hash *chainhash.Hash) *InvVect

NewInvVect returns a new InvVect using the provided type and hash.

type Message 

type Message interface {
	BtcDecode(io.Reader, uint32) error
	BtcEncode(io.Writer, uint32) error
	Command() string
	MaxPayloadLength(uint32) uint32
}

Message is an interface that describes a Decred message. A type that implements Message has complete control over the representation of its data and may therefore contain additional or fewer fields than those which are used directly in the protocol encoded message.

func ReadMessage 

func ReadMessage(r io.Reader, pver uint32, dcrnet CurrencyNet) (Message, []byte, error)

ReadMessage reads, validates, and parses the next Decred Message from r for the provided protocol version and Decred network. It returns the parsed Message and raw bytes which comprise the message. This function only differs from ReadMessageN in that it doesn't return the number of bytes read. This function is mainly provided for backwards compatibility with the original API, but it's also useful for callers that don't care about byte counts.

func ReadMessageN 

func ReadMessageN(r io.Reader, pver uint32, dcrnet CurrencyNet) (int, Message, []byte, error)

ReadMessageN reads, validates, and parses the next Decred Message from r for the provided protocol version and Decred network. It returns the number of bytes read in addition to the parsed Message and raw bytes which comprise the message. This function is the same as ReadMessage except it also returns the number of bytes read.

type MessageError 

type MessageError struct {
	Func        string // Function name
	Description string // Human readable description of the issue
}

MessageError describes an issue with a message. An example of some potential issues are messages from the wrong decred network, invalid commands, mismatched checksums, and exceeding max payloads.

This provides a mechanism for the caller to type assert the error to differentiate between general io errors such as io.EOF and issues that resulted from malformed messages.

func (*MessageError) Error 

func (e *MessageError) Error() string

Error satisfies the error interface and prints human-readable errors.

type MsgAddr 

type MsgAddr struct {
	AddrList []*NetAddress
}

MsgAddr implements the Message interface and represents a bitcoin addr message. It is used to provide a list of known active peers on the network. An active peer is considered one that has transmitted a message within the last 3 hours. Nodes which have not transmitted in that time frame should be forgotten. Each message is limited to a maximum number of addresses, which is currently 1000. As a result, multiple messages must be used to relay the full list.

Use the AddAddress function to build up the list of known addresses when sending an addr message to another peer.

func NewMsgAddr 

func NewMsgAddr() *MsgAddr

NewMsgAddr returns a new bitcoin addr message that conforms to the Message interface. See MsgAddr for details.

func (*MsgAddr) AddAddress 

func (msg *MsgAddr) AddAddress(na *NetAddress) error

AddAddress adds a known active peer to the message.

func (*MsgAddr) AddAddresses 

func (msg *MsgAddr) AddAddresses(netAddrs ...*NetAddress) error

AddAddresses adds multiple known active peers to the message.

func (*MsgAddr) BtcDecode 

func (msg *MsgAddr) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the bitcoin protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgAddr) BtcEncode 

func (msg *MsgAddr) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the bitcoin protocol encoding. This is part of the Message interface implementation.

func (*MsgAddr) ClearAddresses 

func (msg *MsgAddr) ClearAddresses()

ClearAddresses removes all addresses from the message.

func (*MsgAddr) Command 

func (msg *MsgAddr) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgAddr) MaxPayloadLength 

func (msg *MsgAddr) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgBlock 

type MsgBlock struct {
	Header        BlockHeader
	Transactions  []*MsgTx
	STransactions []*MsgTx
}

MsgBlock implements the Message interface and represents a decred block message. It is used to deliver block and transaction information in response to a getdata message (MsgGetData) for a given block hash.

func NewMsgBlock 

func NewMsgBlock(blockHeader *BlockHeader) *MsgBlock

NewMsgBlock returns a new Decred block message that conforms to the Message interface. See MsgBlock for details.

func (*MsgBlock) AddSTransaction 

func (msg *MsgBlock) AddSTransaction(tx *MsgTx) error

AddSTransaction adds a stake transaction to the message.

func (*MsgBlock) AddTransaction 

func (msg *MsgBlock) AddTransaction(tx *MsgTx) error

AddTransaction adds a transaction to the message.

func (*MsgBlock) BlockHash 

func (msg *MsgBlock) BlockHash() chainhash.Hash

BlockHash computes the block identifier hash for this block.

func (*MsgBlock) BtcDecode 

func (msg *MsgBlock) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation. See Deserialize for decoding blocks stored to disk, such as in a database, as opposed to decoding blocks from the wire.

func (*MsgBlock) BtcEncode 

func (msg *MsgBlock) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation. See Serialize for encoding blocks to be stored to disk, such as in a database, as opposed to encoding blocks for the wire.

func (*MsgBlock) Bytes 

func (msg *MsgBlock) Bytes() ([]byte, error)

Bytes returns the serialized form of the block in bytes.

func (*MsgBlock) ClearSTransactions 

func (msg *MsgBlock) ClearSTransactions()

ClearSTransactions removes all stake transactions from the message.

func (*MsgBlock) ClearTransactions 

func (msg *MsgBlock) ClearTransactions()

ClearTransactions removes all transactions from the message.

func (*MsgBlock) Command 

func (msg *MsgBlock) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgBlock) Deserialize 

func (msg *MsgBlock) Deserialize(r io.Reader) error

Deserialize decodes a block from r into the receiver using a format that is suitable for long-term storage such as a database while respecting the Version field in the block. This function differs from BtcDecode in that BtcDecode decodes from the Decred wire protocol as it was sent across the network. The wire encoding can technically differ depending on the protocol version and doesn't even really need to match the format of a stored block at all. As of the time this comment was written, the encoded block is the same in both instances, but there is a distinct difference and separating the two allows the API to be flexible enough to deal with changes.

func (*MsgBlock) DeserializeTxLoc 

func (msg *MsgBlock) DeserializeTxLoc(r *bytes.Buffer) ([]TxLoc, []TxLoc, error)

DeserializeTxLoc decodes r in the same manner Deserialize does, but it takes a byte buffer instead of a generic reader and returns a slice containing the start and length of each transaction within the raw data that is being deserialized.

func (*MsgBlock) FromBytes 

func (msg *MsgBlock) FromBytes(b []byte) error

FromBytes deserializes a transaction byte slice.

func (*MsgBlock) MaxPayloadLength 

func (msg *MsgBlock) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

func (*MsgBlock) STxHashes 

func (msg *MsgBlock) STxHashes() []chainhash.Hash

STxHashes returns a slice of hashes of all of stake transactions in this block.

func (*MsgBlock) Serialize 

func (msg *MsgBlock) Serialize(w io.Writer) error

Serialize encodes the block to w using a format that suitable for long-term storage such as a database while respecting the Version field in the block. This function differs from BtcEncode in that BtcEncode encodes the block to the Decred wire protocol in order to be sent across the network. The wire encoding can technically differ depending on the protocol version and doesn't even really need to match the format of a stored block at all. As of the time this comment was written, the encoded block is the same in both instances, but there is a distinct difference and separating the two allows the API to be flexible enough to deal with changes.

func (*MsgBlock) SerializeSize 

func (msg *MsgBlock) SerializeSize() int

SerializeSize returns the number of bytes it would take to serialize the the block.

func (*MsgBlock) TxHashes 

func (msg *MsgBlock) TxHashes() []chainhash.Hash

TxHashes returns a slice of hashes of all of transactions in this block.

type MsgCFHeaders 

type MsgCFHeaders struct {
	StopHash     chainhash.Hash
	FilterType   FilterType
	HeaderHashes []*chainhash.Hash
}

MsgCFHeaders implements the Message interface and represents a cfheaders message. It is used to deliver committed filter header information in response to a getcfheaders message (MsgGetCFHeaders). The maximum number of committed filter headers per message is currently 2000. See MsgGetCFHeaders for details on requesting the headers.

func NewMsgCFHeaders 

func NewMsgCFHeaders() *MsgCFHeaders

NewMsgCFHeaders returns a new cfheaders message that conforms to the Message interface. See MsgCFHeaders for details.

func (*MsgCFHeaders) AddCFHeader 

func (msg *MsgCFHeaders) AddCFHeader(headerHash *chainhash.Hash) error

AddCFHeader adds a new committed filter header to the message.

func (*MsgCFHeaders) BtcDecode 

func (msg *MsgCFHeaders) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the wire protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgCFHeaders) BtcEncode 

func (msg *MsgCFHeaders) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the wire protocol encoding. This is part of the Message interface implementation.

func (*MsgCFHeaders) Command 

func (msg *MsgCFHeaders) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgCFHeaders) Deserialize 

func (msg *MsgCFHeaders) Deserialize(r io.Reader) error

Deserialize decodes a filter header from r into the receiver using a format that is suitable for long-term storage such as a database. This function differs from BtcDecode in that BtcDecode decodes from the wire protocol as it was sent across the network. The wire encoding can technically differ depending on the protocol version and doesn't even really need to match the format of a stored filter header at all. As of the time this comment was written, the encoded filter header is the same in both instances, but there is a distinct difference and separating the two allows the API to be flexible enough to deal with changes.

func (*MsgCFHeaders) MaxPayloadLength 

func (msg *MsgCFHeaders) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgCFTypes 

type MsgCFTypes struct {
	SupportedFilters []FilterType
}

MsgCFTypes is the cftypes message.

func NewMsgCFTypes 

func NewMsgCFTypes(filterTypes []FilterType) *MsgCFTypes

NewMsgCFTypes returns a new cftypes message that conforms to the Message interface. See MsgCFTypes for details.

func (*MsgCFTypes) BtcDecode 

func (msg *MsgCFTypes) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the wire protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgCFTypes) BtcEncode 

func (msg *MsgCFTypes) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the wire protocol encoding. This is part of the Message interface implementation.

func (*MsgCFTypes) Command 

func (msg *MsgCFTypes) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgCFTypes) Deserialize 

func (msg *MsgCFTypes) Deserialize(r io.Reader) error

Deserialize decodes a filter from r into the receiver using a format that is suitable for long-term storage such as a database. This function differs from BtcDecode in that BtcDecode decodes from the wire protocol as it was sent across the network. The wire encoding can technically differ depending on the protocol version and doesn't even really need to match the format of a stored filter at all. As of the time this comment was written, the encoded filter is the same in both instances, but there is a distinct difference and separating the two allows the API to be flexible enough to deal with changes.

func (*MsgCFTypes) MaxPayloadLength 

func (msg *MsgCFTypes) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgCFilter 

type MsgCFilter struct {
	BlockHash  chainhash.Hash
	FilterType FilterType
	Data       []byte
}

MsgCFilter implements the Message interface and represents a cfilter message. It is used to deliver a committed filter in response to a getcfilter (MsgGetCFilter) message.

func NewMsgCFilter 

func NewMsgCFilter(blockHash *chainhash.Hash, filterType FilterType,
	data []byte) *MsgCFilter

NewMsgCFilter returns a new cfilter message that conforms to the Message interface. See MsgCFilter for details.

func (*MsgCFilter) BtcDecode 

func (msg *MsgCFilter) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the wire protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgCFilter) BtcEncode 

func (msg *MsgCFilter) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the wire protocol encoding. This is part of the Message interface implementation.

func (*MsgCFilter) Command 

func (msg *MsgCFilter) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgCFilter) Deserialize 

func (msg *MsgCFilter) Deserialize(r io.Reader) error

Deserialize decodes a filter from r into the receiver using a format that is suitable for long-term storage such as a database. This function differs from BtcDecode in that BtcDecode decodes from the wire protocol as it was sent across the network. The wire encoding can technically differ depending on the protocol version and doesn't even really need to match the format of a stored filter at all. As of the time this comment was written, the encoded filter is the same in both instances, but there is a distinct difference and separating the two allows the API to be flexible enough to deal with changes.

func (*MsgCFilter) MaxPayloadLength 

func (msg *MsgCFilter) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgFeeFilter 

type MsgFeeFilter struct {
	MinFee int64
}

MsgFeeFilter implements the Message interface and represents a feefilter message. It is used to request the receiving peer does not announce any transactions below the specified minimum fee rate.

This message was not added until protocol versions starting with FeeFilterVersion.

func NewMsgFeeFilter 

func NewMsgFeeFilter(minfee int64) *MsgFeeFilter

NewMsgFeeFilter returns a new feefilter message that conforms to the Message interface. See MsgFeeFilter for details.

func (*MsgFeeFilter) BtcDecode 

func (msg *MsgFeeFilter) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgFeeFilter) BtcEncode 

func (msg *MsgFeeFilter) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgFeeFilter) Command 

func (msg *MsgFeeFilter) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgFeeFilter) MaxPayloadLength 

func (msg *MsgFeeFilter) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetAddr 

type MsgGetAddr struct{}

MsgGetAddr implements the Message interface and represents a decred getaddr message. It is used to request a list of known active peers on the network from a peer to help identify potential nodes. The list is returned via one or more addr messages (MsgAddr).

This message has no payload.

func NewMsgGetAddr 

func NewMsgGetAddr() *MsgGetAddr

NewMsgGetAddr returns a new Decred getaddr message that conforms to the Message interface. See MsgGetAddr for details.

func (*MsgGetAddr) BtcDecode 

func (msg *MsgGetAddr) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetAddr) BtcEncode 

func (msg *MsgGetAddr) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgGetAddr) Command 

func (msg *MsgGetAddr) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetAddr) MaxPayloadLength 

func (msg *MsgGetAddr) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetBlocks 

type MsgGetBlocks struct {
	ProtocolVersion    uint32
	BlockLocatorHashes []*chainhash.Hash
	HashStop           chainhash.Hash
}

MsgGetBlocks implements the Message interface and represents a decred getblocks message. It is used to request a list of blocks starting after the last known hash in the slice of block locator hashes. The list is returned via an inv message (MsgInv) and is limited by a specific hash to stop at or the maximum number of blocks per message, which is currently 500.

Set the HashStop field to the hash at which to stop and use AddBlockLocatorHash to build up the list of block locator hashes.

The algorithm for building the block locator hashes should be to add the hashes in reverse order until you reach the genesis block. In order to keep the list of locator hashes to a reasonable number of entries, first add the most recent 10 block hashes, then double the step each loop iteration to exponentially decrease the number of hashes the further away from head and closer to the genesis block you get.

func NewMsgGetBlocks 

func NewMsgGetBlocks(hashStop *chainhash.Hash) *MsgGetBlocks

NewMsgGetBlocks returns a new Decred getblocks message that conforms to the Message interface using the passed parameters and defaults for the remaining fields.

func (*MsgGetBlocks) AddBlockLocatorHash 

func (msg *MsgGetBlocks) AddBlockLocatorHash(hash *chainhash.Hash) error

AddBlockLocatorHash adds a new block locator hash to the message.

func (*MsgGetBlocks) BtcDecode 

func (msg *MsgGetBlocks) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetBlocks) BtcEncode 

func (msg *MsgGetBlocks) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgGetBlocks) Command 

func (msg *MsgGetBlocks) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetBlocks) MaxPayloadLength 

func (msg *MsgGetBlocks) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetCFHeaders 

type MsgGetCFHeaders struct {
	BlockLocatorHashes []*chainhash.Hash
	HashStop           chainhash.Hash
	FilterType         FilterType
}

MsgGetCFHeaders is a message similar to MsgGetHeaders, but for committed filter headers. It allows to set the FilterType field to get headers in the chain of basic (0x00) or extended (0x01) headers.

func NewMsgGetCFHeaders 

func NewMsgGetCFHeaders() *MsgGetCFHeaders

NewMsgGetCFHeaders returns a new getcfheader message that conforms to the Message interface using the passed parameters and defaults for the remaining fields.

func (*MsgGetCFHeaders) AddBlockLocatorHash 

func (msg *MsgGetCFHeaders) AddBlockLocatorHash(hash *chainhash.Hash) error

AddBlockLocatorHash adds a new block locator hash to the message.

func (*MsgGetCFHeaders) BtcDecode 

func (msg *MsgGetCFHeaders) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the wire protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetCFHeaders) BtcEncode 

func (msg *MsgGetCFHeaders) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the wire protocol encoding. This is part of the Message interface implementation.

func (*MsgGetCFHeaders) Command 

func (msg *MsgGetCFHeaders) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetCFHeaders) MaxPayloadLength 

func (msg *MsgGetCFHeaders) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetCFTypes 

type MsgGetCFTypes struct{}

MsgGetCFTypes is the getcftypes message.

func NewMsgGetCFTypes 

func NewMsgGetCFTypes() *MsgGetCFTypes

NewMsgGetCFTypes returns a new getcftypes message that conforms to the Message interface.

func (*MsgGetCFTypes) BtcDecode 

func (msg *MsgGetCFTypes) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes the receiver from w using the wire protocol encoding. This is part of the Message interface implementation.

func (*MsgGetCFTypes) BtcEncode 

func (msg *MsgGetCFTypes) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the wire protocol encoding. This is part of the Message interface implementation.

func (*MsgGetCFTypes) Command 

func (msg *MsgGetCFTypes) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetCFTypes) MaxPayloadLength 

func (msg *MsgGetCFTypes) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetCFilter 

type MsgGetCFilter struct {
	BlockHash  chainhash.Hash
	FilterType FilterType
}

MsgGetCFilter implements the Message interface and represents a getcfilter message. It is used to request a committed filter for a block.

func NewMsgGetCFilter 

func NewMsgGetCFilter(blockHash *chainhash.Hash, filterType FilterType) *MsgGetCFilter

NewMsgGetCFilter returns a new getcfilter message that conforms to the Message interface using the passed parameters and defaults for the remaining fields.

func (*MsgGetCFilter) BtcDecode 

func (msg *MsgGetCFilter) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the wire protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetCFilter) BtcEncode 

func (msg *MsgGetCFilter) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the wire protocol encoding. This is part of the Message interface implementation.

func (*MsgGetCFilter) Command 

func (msg *MsgGetCFilter) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetCFilter) MaxPayloadLength 

func (msg *MsgGetCFilter) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetData 

type MsgGetData struct {
	InvList []*InvVect
}

MsgGetData implements the Message interface and represents a decred getdata message. It is used to request data such as blocks and transactions from another peer. It should be used in response to the inv (MsgInv) message to request the actual data referenced by each inventory vector the receiving peer doesn't already have. Each message is limited to a maximum number of inventory vectors, which is currently 50,000. As a result, multiple messages must be used to request larger amounts of data.

Use the AddInvVect function to build up the list of inventory vectors when sending a getdata message to another peer.

func NewMsgGetData 

func NewMsgGetData() *MsgGetData

NewMsgGetData returns a new Decred getdata message that conforms to the Message interface. See MsgGetData for details.

func NewMsgGetDataSizeHint 

func NewMsgGetDataSizeHint(sizeHint uint) *MsgGetData

NewMsgGetDataSizeHint returns a new Decred getdata message that conforms to the Message interface. See MsgGetData for details. This function differs from NewMsgGetData in that it allows a default allocation size for the backing array which houses the inventory vector list. This allows callers who know in advance how large the inventory list will grow to avoid the overhead of growing the internal backing array several times when appending large amounts of inventory vectors with AddInvVect. Note that the specified hint is just that - a hint that is used for the default allocation size. Adding more (or less) inventory vectors will still work properly. The size hint is limited to MaxInvPerMsg.

func (*MsgGetData) AddInvVect 

func (msg *MsgGetData) AddInvVect(iv *InvVect) error

AddInvVect adds an inventory vector to the message.

func (*MsgGetData) BtcDecode 

func (msg *MsgGetData) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetData) BtcEncode 

func (msg *MsgGetData) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgGetData) Command 

func (msg *MsgGetData) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetData) MaxPayloadLength 

func (msg *MsgGetData) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetHeaders 

type MsgGetHeaders struct {
	ProtocolVersion    uint32
	BlockLocatorHashes []*chainhash.Hash
	HashStop           chainhash.Hash
}

MsgGetHeaders implements the Message interface and represents a decred getheaders message. It is used to request a list of block headers for blocks starting after the last known hash in the slice of block locator hashes. The list is returned via a headers message (MsgHeaders) and is limited by a specific hash to stop at or the maximum number of block headers per message, which is currently 2000.

Set the HashStop field to the hash at which to stop and use AddBlockLocatorHash to build up the list of block locator hashes.

The algorithm for building the block locator hashes should be to add the hashes in reverse order until you reach the genesis block. In order to keep the list of locator hashes to a resonable number of entries, first add the most recent 10 block hashes, then double the step each loop iteration to exponentially decrease the number of hashes the further away from head and closer to the genesis block you get.

func NewMsgGetHeaders 

func NewMsgGetHeaders() *MsgGetHeaders

NewMsgGetHeaders returns a new Decred getheaders message that conforms to the Message interface. See MsgGetHeaders for details.

func (*MsgGetHeaders) AddBlockLocatorHash 

func (msg *MsgGetHeaders) AddBlockLocatorHash(hash *chainhash.Hash) error

AddBlockLocatorHash adds a new block locator hash to the message.

func (*MsgGetHeaders) BtcDecode 

func (msg *MsgGetHeaders) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetHeaders) BtcEncode 

func (msg *MsgGetHeaders) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgGetHeaders) Command 

func (msg *MsgGetHeaders) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetHeaders) MaxPayloadLength 

func (msg *MsgGetHeaders) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgGetMiningState 

type MsgGetMiningState struct{}

MsgGetMiningState implements the Message interface and represents a getminingstate message. It is used to request the current mining state from a peer.

func NewMsgGetMiningState 

func NewMsgGetMiningState() *MsgGetMiningState

NewMsgGetMiningState returns a new Decred pong message that conforms to the Message interface. See MsgPong for details.

func (*MsgGetMiningState) BtcDecode 

func (msg *MsgGetMiningState) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgGetMiningState) BtcEncode 

func (msg *MsgGetMiningState) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgGetMiningState) Command 

func (msg *MsgGetMiningState) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgGetMiningState) MaxPayloadLength 

func (msg *MsgGetMiningState) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgHeaders 

type MsgHeaders struct {
	Headers []*BlockHeader
}

MsgHeaders implements the Message interface and represents a Decred headers message. It is used to deliver block header information in response to a getheaders message (MsgGetHeaders). The maximum number of block headers per message is currently 2000. See MsgGetHeaders for details on requesting the headers.

func NewMsgHeaders 

func NewMsgHeaders() *MsgHeaders

NewMsgHeaders returns a new Decred headers message that conforms to the Message interface. See MsgHeaders for details.

func (*MsgHeaders) AddBlockHeader 

func (msg *MsgHeaders) AddBlockHeader(bh *BlockHeader) error

AddBlockHeader adds a new block header to the message.

func (*MsgHeaders) BtcDecode 

func (msg *MsgHeaders) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgHeaders) BtcEncode 

func (msg *MsgHeaders) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgHeaders) Command 

func (msg *MsgHeaders) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgHeaders) MaxPayloadLength 

func (msg *MsgHeaders) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgInv 

type MsgInv struct {
	InvList []*InvVect
}

MsgInv implements the Message interface and represents a Decred inv message. It is used to advertise a peer's known data such as blocks and transactions through inventory vectors. It may be sent unsolicited to inform other peers of the data or in response to a getblocks message (MsgGetBlocks). Each message is limited to a maximum number of inventory vectors, which is currently 50,000.

Use the AddInvVect function to build up the list of inventory vectors when sending an inv message to another peer.

func NewMsgInv 

func NewMsgInv() *MsgInv

NewMsgInv returns a new Decred inv message that conforms to the Message interface. See MsgInv for details.

func NewMsgInvSizeHint 

func NewMsgInvSizeHint(sizeHint uint) *MsgInv

NewMsgInvSizeHint returns a new Decred inv message that conforms to the Message interface. See MsgInv for details. This function differs from NewMsgInv in that it allows a default allocation size for the backing array which houses the inventory vector list. This allows callers who know in advance how large the inventory list will grow to avoid the overhead of growing the internal backing array several times when appending large amounts of inventory vectors with AddInvVect. Note that the specified hint is just that - a hint that is used for the default allocation size. Adding more (or less) inventory vectors will still work properly. The size hint is limited to MaxInvPerMsg.

func (*MsgInv) AddInvVect 

func (msg *MsgInv) AddInvVect(iv *InvVect) error

AddInvVect adds an inventory vector to the message.

func (*MsgInv) BtcDecode 

func (msg *MsgInv) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgInv) BtcEncode 

func (msg *MsgInv) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgInv) Command 

func (msg *MsgInv) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgInv) MaxPayloadLength 

func (msg *MsgInv) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgMemPool 

type MsgMemPool struct{}

MsgMemPool implements the Message interface and represents a Decred mempool message. It is used to request a list of transactions still in the active memory pool of a relay.

This message has no payload and was not added until protocol versions starting with BIP0035Version.

func NewMsgMemPool 

func NewMsgMemPool() *MsgMemPool

NewMsgMemPool returns a new Decred pong message that conforms to the Message interface. See MsgPong for details.

func (*MsgMemPool) BtcDecode 

func (msg *MsgMemPool) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgMemPool) BtcEncode 

func (msg *MsgMemPool) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgMemPool) Command 

func (msg *MsgMemPool) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgMemPool) MaxPayloadLength 

func (msg *MsgMemPool) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgMiningState 

type MsgMiningState struct {
	Version     uint32
	Height      uint32
	BlockHashes []*chainhash.Hash
	VoteHashes  []*chainhash.Hash
}

MsgMiningState implements the Message interface and represents a mining state message. It is used to request a list of blocks located at the chain tip along with all votes for those blocks. The list is returned is limited by the maximum number of blocks per message and the maximum number of votes per message.

func NewMsgMiningState 

func NewMsgMiningState() *MsgMiningState

NewMsgMiningState returns a new Decred miningstate message that conforms to the Message interface using the defaults for the fields.

func (*MsgMiningState) AddBlockHash 

func (msg *MsgMiningState) AddBlockHash(hash *chainhash.Hash) error

AddBlockHash adds a new block hash to the message.

func (*MsgMiningState) AddVoteHash 

func (msg *MsgMiningState) AddVoteHash(hash *chainhash.Hash) error

AddVoteHash adds a new vote hash to the message.

func (*MsgMiningState) BtcDecode 

func (msg *MsgMiningState) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgMiningState) BtcEncode 

func (msg *MsgMiningState) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the protocol encoding. This is part of the Message interface implementation.

func (*MsgMiningState) Command 

func (msg *MsgMiningState) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgMiningState) MaxPayloadLength 

func (msg *MsgMiningState) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgNotFound 

type MsgNotFound struct {
	InvList []*InvVect
}

MsgNotFound defines a Decred notfound message which is sent in response to a getdata message if any of the requested data in not available on the peer. Each message is limited to a maximum number of inventory vectors, which is currently 50,000.

Use the AddInvVect function to build up the list of inventory vectors when sending a notfound message to another peer.

func NewMsgNotFound 

func NewMsgNotFound() *MsgNotFound

NewMsgNotFound returns a new Decred notfound message that conforms to the Message interface. See MsgNotFound for details.

func (*MsgNotFound) AddInvVect 

func (msg *MsgNotFound) AddInvVect(iv *InvVect) error

AddInvVect adds an inventory vector to the message.

func (*MsgNotFound) BtcDecode 

func (msg *MsgNotFound) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgNotFound) BtcEncode 

func (msg *MsgNotFound) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgNotFound) Command 

func (msg *MsgNotFound) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgNotFound) MaxPayloadLength 

func (msg *MsgNotFound) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgPing 

type MsgPing struct {
	// Unique value associated with message that is used to identify
	// specific ping message.
	Nonce uint64
}

MsgPing implements the Message interface and represents a Decred ping message.

For versions BIP0031Version and earlier, it is used primarily to confirm that a connection is still valid. A transmission error is typically interpreted as a closed connection and that the peer should be removed. For versions AFTER BIP0031Version it contains an identifier which can be returned in the pong message to determine network timing.

The payload for this message just consists of a nonce used for identifying it later.

func NewMsgPing 

func NewMsgPing(nonce uint64) *MsgPing

NewMsgPing returns a new Decred ping message that conforms to the Message interface. See MsgPing for details.

func (*MsgPing) BtcDecode 

func (msg *MsgPing) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgPing) BtcEncode 

func (msg *MsgPing) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgPing) Command 

func (msg *MsgPing) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgPing) MaxPayloadLength 

func (msg *MsgPing) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgPong 

type MsgPong struct {
	// Unique value associated with message that is used to identify
	// specific ping message.
	Nonce uint64
}

MsgPong implements the Message interface and represents a Decred pong message which is used primarily to confirm that a connection is still valid in response to a Decred ping message (MsgPing).

This message was not added until protocol versions AFTER BIP0031Version.

func NewMsgPong 

func NewMsgPong(nonce uint64) *MsgPong

NewMsgPong returns a new Decred pong message that conforms to the Message interface. See MsgPong for details.

func (*MsgPong) BtcDecode 

func (msg *MsgPong) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgPong) BtcEncode 

func (msg *MsgPong) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgPong) Command 

func (msg *MsgPong) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgPong) MaxPayloadLength 

func (msg *MsgPong) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgReject 

type MsgReject struct {
	// Cmd is the command for the message which was rejected such as
	// as CmdBlock or CmdTx.  This can be obtained from the Command function
	// of a Message.
	Cmd string

	// RejectCode is a code indicating why the command was rejected.  It
	// is encoded as a uint8 on the wire.
	Code RejectCode

	// Reason is a human-readable string with specific details (over and
	// above the reject code) about why the command was rejected.
	Reason string

	// Hash identifies a specific block or transaction that was rejected
	// and therefore only applies the MsgBlock and MsgTx messages.
	Hash chainhash.Hash
}

MsgReject implements the Message interface and represents a Decred reject message.

This message was not added until protocol version RejectVersion.

func NewMsgReject 

func NewMsgReject(command string, code RejectCode, reason string) *MsgReject

NewMsgReject returns a new Decred reject message that conforms to the Message interface. See MsgReject for details.

func (*MsgReject) BtcDecode 

func (msg *MsgReject) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgReject) BtcEncode 

func (msg *MsgReject) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgReject) Command 

func (msg *MsgReject) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgReject) MaxPayloadLength 

func (msg *MsgReject) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgSendHeaders 

type MsgSendHeaders struct{}

MsgSendHeaders implements the Message interface and represents a bitcoin sendheaders message. It is used to request the peer send block headers rather than inventory vectors.

This message has no payload and was not added until protocol versions starting with SendHeadersVersion.

func NewMsgSendHeaders 

func NewMsgSendHeaders() *MsgSendHeaders

NewMsgSendHeaders returns a new bitcoin sendheaders message that conforms to the Message interface. See MsgSendHeaders for details.

func (*MsgSendHeaders) BtcDecode 

func (msg *MsgSendHeaders) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the bitcoin protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgSendHeaders) BtcEncode 

func (msg *MsgSendHeaders) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the bitcoin protocol encoding. This is part of the Message interface implementation.

func (*MsgSendHeaders) Command 

func (msg *MsgSendHeaders) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgSendHeaders) MaxPayloadLength 

func (msg *MsgSendHeaders) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgTx 

type MsgTx struct {
	CachedHash *chainhash.Hash
	SerType    TxSerializeType
	Version    uint16
	TxIn       []*TxIn
	TxOut      []*TxOut
	LockTime   uint32
	Expiry     uint32
}

MsgTx implements the Message interface and represents a Decred tx message. It is used to deliver transaction information in response to a getdata message (MsgGetData) for a given transaction.

Use the AddTxIn and AddTxOut functions to build up the list of transaction inputs and outputs.

func NewMsgTx 

func NewMsgTx() *MsgTx

NewMsgTx returns a new Decred tx message that conforms to the Message interface. The return instance has a default version of TxVersion and there are no transaction inputs or outputs. Also, the lock time is set to zero to indicate the transaction is valid immediately as opposed to some time in future.

func (*MsgTx) AddTxIn 

func (msg *MsgTx) AddTxIn(ti *TxIn)

AddTxIn adds a transaction input to the message.

func (*MsgTx) AddTxOut 

func (msg *MsgTx) AddTxOut(to *TxOut)

AddTxOut adds a transaction output to the message.

func (*MsgTx) BtcDecode 

func (msg *MsgTx) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation. See Deserialize for decoding transactions stored to disk, such as in a database, as opposed to decoding transactions from the wire.

func (*MsgTx) BtcEncode 

func (msg *MsgTx) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation. See Serialize for encoding transactions to be stored to disk, such as in a database, as opposed to encoding transactions for the wire.

func (*MsgTx) Bytes 

func (msg *MsgTx) Bytes() ([]byte, error)

Bytes returns the serialized form of the transaction in bytes.

func (*MsgTx) BytesPrefix 

func (msg *MsgTx) BytesPrefix() ([]byte, error)

BytesPrefix returns the serialized form of the transaction prefix in bytes.

func (*MsgTx) BytesWitness 

func (msg *MsgTx) BytesWitness() ([]byte, error)

BytesWitness returns the serialized form of the transaction prefix in bytes.

func (*MsgTx) CachedTxHash 

func (msg *MsgTx) CachedTxHash() *chainhash.Hash

CachedTxHash is equivalent to calling TxHash, however it caches the result so subsequent calls do not have to recalculate the hash. It can be recalculated later with RecacheTxHash.

func (*MsgTx) Command 

func (msg *MsgTx) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgTx) Copy 

func (msg *MsgTx) Copy() *MsgTx

Copy creates a deep copy of a transaction so that the original does not get modified when the copy is manipulated.

func (*MsgTx) Deserialize 

func (msg *MsgTx) Deserialize(r io.Reader) error

Deserialize decodes a transaction from r into the receiver using a format that is suitable for long-term storage such as a database while respecting the Version field in the transaction. This function differs from BtcDecode in that BtcDecode decodes from the Decred wire protocol as it was sent across the network. The wire encoding can technically differ depending on the protocol version and doesn't even really need to match the format of a stored transaction at all. As of the time this comment was written, the encoded transaction is the same in both instances, but there is a distinct difference and separating the two allows the API to be flexible enough to deal with changes.

func (*MsgTx) FromBytes 

func (msg *MsgTx) FromBytes(b []byte) error

FromBytes deserializes a transaction byte slice.

func (*MsgTx) MaxPayloadLength 

func (msg *MsgTx) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

func (*MsgTx) PkScriptLocs 

func (msg *MsgTx) PkScriptLocs() []int

PkScriptLocs returns a slice containing the start of each public key script within the raw serialized transaction. The caller can easily obtain the length of each script by using len on the script available via the appropriate transaction output entry. TODO: Make this work for all serialization types, not just the full serialization type.

func (*MsgTx) RecacheTxHash 

func (msg *MsgTx) RecacheTxHash() *chainhash.Hash

RecacheTxHash is equivalent to calling TxHash, however it replaces the cached result so future calls to CachedTxHash will return this newly calculated hash.

func (*MsgTx) Serialize 

func (msg *MsgTx) Serialize(w io.Writer) error

Serialize encodes the transaction to w using a format that suitable for long-term storage such as a database while respecting the Version field in the transaction. This function differs from BtcEncode in that BtcEncode encodes the transaction to the Decred wire protocol in order to be sent across the network. The wire encoding can technically differ depending on the protocol version and doesn't even really need to match the format of a stored transaction at all. As of the time this comment was written, the encoded transaction is the same in both instances, but there is a distinct difference and separating the two allows the API to be flexible enough to deal with changes.

func (*MsgTx) SerializeSize 

func (msg *MsgTx) SerializeSize() int

SerializeSize returns the number of bytes it would take to serialize the the transaction.

func (*MsgTx) TxHash 

func (msg *MsgTx) TxHash() chainhash.Hash

TxHash generates the hash for the transaction prefix. Since it does not contain any witness data, it is not malleable and therefore is stable for use in unconfirmed transaction chains.

func (*MsgTx) TxHashFull 

func (msg *MsgTx) TxHashFull() chainhash.Hash

TxHashFull generates the hash for the transaction prefix || witness. It first obtains the hashes for both the transaction prefix and witness, then concatenates them and hashes the result.

func (*MsgTx) TxHashWitness 

func (msg *MsgTx) TxHashWitness() chainhash.Hash

TxHashWitness generates the hash for the transaction witness.

type MsgVerAck 

type MsgVerAck struct{}

MsgVerAck defines a Decred verack message which is used for a peer to acknowledge a version message (MsgVersion) after it has used the information to negotiate parameters. It implements the Message interface.

This message has no payload.

func NewMsgVerAck 

func NewMsgVerAck() *MsgVerAck

NewMsgVerAck returns a new Decred verack message that conforms to the Message interface.

func (*MsgVerAck) BtcDecode 

func (msg *MsgVerAck) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. This is part of the Message interface implementation.

func (*MsgVerAck) BtcEncode 

func (msg *MsgVerAck) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgVerAck) Command 

func (msg *MsgVerAck) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgVerAck) MaxPayloadLength 

func (msg *MsgVerAck) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type MsgVersion 

type MsgVersion struct {
	// Version of the protocol the node is using.
	ProtocolVersion int32

	// Bitfield which identifies the enabled services.
	Services ServiceFlag

	// Time the message was generated.  This is encoded as an int64 on the wire.
	Timestamp time.Time

	// Address of the remote peer.
	AddrYou NetAddress

	// Address of the local peer.
	AddrMe NetAddress

	// Unique value associated with message that is used to detect self
	// connections.
	Nonce uint64

	// The user agent that generated messsage.  This is a encoded as a varString
	// on the wire.  This has a max length of MaxUserAgentLen.
	UserAgent string

	// Last block seen by the generator of the version message.
	LastBlock int32

	// Don't announce transactions to peer.
	DisableRelayTx bool
}

MsgVersion implements the Message interface and represents a Decred version message. It is used for a peer to advertise itself as soon as an outbound connection is made. The remote peer then uses this information along with its own to negotiate. The remote peer must then respond with a version message of its own containing the negotiated values followed by a verack message (MsgVerAck). This exchange must take place before any further communication is allowed to proceed.

func NewMsgVersion 

func NewMsgVersion(me *NetAddress, you *NetAddress, nonce uint64,
	lastBlock int32) *MsgVersion

NewMsgVersion returns a new Decred version message that conforms to the Message interface using the passed parameters and defaults for the remaining fields.

func NewMsgVersionFromConn 

func NewMsgVersionFromConn(conn net.Conn, nonce uint64,
	lastBlock int32) (*MsgVersion, error)

NewMsgVersionFromConn is a convenience function that extracts the remote and local address from conn and returns a new Decred version message that conforms to the Message interface. See NewMsgVersion.

func (*MsgVersion) AddService 

func (msg *MsgVersion) AddService(service ServiceFlag)

AddService adds service as a supported service by the peer generating the message.

func (*MsgVersion) AddUserAgent 

func (msg *MsgVersion) AddUserAgent(name string, version string,
	comments ...string) error

AddUserAgent adds a user agent to the user agent string for the version message. The version string is not defined to any strict format, although it is recommended to use the form "major.minor.revision" e.g. "2.6.41".

func (*MsgVersion) BtcDecode 

func (msg *MsgVersion) BtcDecode(r io.Reader, pver uint32) error

BtcDecode decodes r using the Decred protocol encoding into the receiver. The version message is special in that the protocol version hasn't been negotiated yet. As a result, the pver field is ignored and any fields which are added in new versions are optional. This also mean that r must be a *bytes.Buffer so the number of remaining bytes can be ascertained.

This is part of the Message interface implementation.

func (*MsgVersion) BtcEncode 

func (msg *MsgVersion) BtcEncode(w io.Writer, pver uint32) error

BtcEncode encodes the receiver to w using the Decred protocol encoding. This is part of the Message interface implementation.

func (*MsgVersion) Command 

func (msg *MsgVersion) Command() string

Command returns the protocol command string for the message. This is part of the Message interface implementation.

func (*MsgVersion) HasService 

func (msg *MsgVersion) HasService(service ServiceFlag) bool

HasService returns whether the specified service is supported by the peer that generated the message.

func (*MsgVersion) MaxPayloadLength 

func (msg *MsgVersion) MaxPayloadLength(pver uint32) uint32

MaxPayloadLength returns the maximum length the payload can be for the receiver. This is part of the Message interface implementation.

type NetAddress 

type NetAddress struct {
	// Last time the address was seen.  This is, unfortunately, encoded as a
	// uint32 on the wire and therefore is limited to 2106.  This field is
	// not present in the Decred version message (MsgVersion) nor was it
	// added until protocol version >= NetAddressTimeVersion.
	Timestamp time.Time

	// Bitfield which identifies the services supported by the address.
	Services ServiceFlag

	// IP address of the peer.
	IP net.IP

	// Port the peer is using.  This is encoded in big endian on the wire
	// which differs from most everything else.
	Port uint16
}

NetAddress defines information about a peer on the network including the time it was last seen, the services it supports, its IP address, and port.

func NewNetAddress 

func NewNetAddress(addr net.Addr, services ServiceFlag) (*NetAddress, error)

NewNetAddress returns a new NetAddress using the provided TCP address and supported services with defaults for the remaining fields.

Note that addr must be a net.TCPAddr. An ErrInvalidNetAddr is returned if it is not.

func NewNetAddressIPPort 

func NewNetAddressIPPort(ip net.IP, port uint16, services ServiceFlag) *NetAddress

NewNetAddressIPPort returns a new NetAddress using the provided IP, port, and supported services with defaults for the remaining fields.

func NewNetAddressTimestamp 

func NewNetAddressTimestamp(
	timestamp time.Time, services ServiceFlag, ip net.IP, port uint16) *NetAddress

NewNetAddressTimestamp returns a new NetAddress using the provided timestamp, IP, port, and supported services. The timestamp is rounded to single second precision.

func (*NetAddress) AddService 

func (na *NetAddress) AddService(service ServiceFlag)

AddService adds service as a supported service by the peer generating the message.

func (*NetAddress) HasService 

func (na *NetAddress) HasService(service ServiceFlag) bool

HasService returns whether the specified service is supported by the address.

type OutPoint 

type OutPoint struct {
	Hash  chainhash.Hash
	Index uint32
	Tree  int8
}

OutPoint defines a Decred data type that is used to track previous transaction outputs.

func NewOutPoint 

func NewOutPoint(hash *chainhash.Hash, index uint32, tree int8) *OutPoint

NewOutPoint returns a new Decred transaction outpoint point with the provided hash and index.

func (OutPoint) String 

func (o OutPoint) String() string

String returns the OutPoint in the human-readable form "hash:index".

type RejectCode 

type RejectCode uint8

RejectCode represents a numeric value by which a remote peer indicates why a message was rejected. 

const (
	RejectMalformed       RejectCode = 0x01
	RejectInvalid         RejectCode = 0x10
	RejectObsolete        RejectCode = 0x11
	RejectDuplicate       RejectCode = 0x12
	RejectNonstandard     RejectCode = 0x40
	RejectDust            RejectCode = 0x41
	RejectInsufficientFee RejectCode = 0x42
	RejectCheckpoint      RejectCode = 0x43
)

These constants define the various supported reject codes.

func (RejectCode) String 

func (code RejectCode) String() string

String returns the RejectCode in human-readable form.

type ServiceFlag 

type ServiceFlag uint64

ServiceFlag identifies services supported by a Decred peer. 

const (
	// SFNodeNetwork is a flag used to indicate a peer is a full node.
	SFNodeNetwork ServiceFlag = 1 << iota

	// SFNodeBloom is a flag used to indiciate a peer supports bloom
	// filtering.
	SFNodeBloom

	// SFNodeCF is a flag used to indicate a peer supports committed
	// filters (CFs).
	SFNodeCF
)

func (ServiceFlag) String 

func (f ServiceFlag) String() string

String returns the ServiceFlag in human-readable form.

type TxIn 

type TxIn struct {
	// Non-witness
	PreviousOutPoint OutPoint
	Sequence         uint32

	// Witness
	ValueIn         int64
	BlockHeight     uint32
	BlockIndex      uint32
	SignatureScript []byte
}

TxIn defines a Decred transaction input.

func NewTxIn 

func NewTxIn(prevOut *OutPoint, valueIn int64, signatureScript []byte) *TxIn

NewTxIn returns a new Decred transaction input with the provided previous outpoint point and signature script with a default sequence of MaxTxInSequenceNum.

func (*TxIn) SerializeSizePrefix 

func (t *TxIn) SerializeSizePrefix() int

SerializeSizePrefix returns the number of bytes it would take to serialize the transaction input for a prefix.

func (*TxIn) SerializeSizeWitness 

func (t *TxIn) SerializeSizeWitness() int

SerializeSizeWitness returns the number of bytes it would take to serialize the transaction input for a witness.

type TxLoc 

type TxLoc struct {
	TxStart int
	TxLen   int
}

TxLoc holds locator data for the offset and length of where a transaction is located within a MsgBlock data buffer.

type TxOut 

type TxOut struct {
	Value    int64
	Version  uint16
	PkScript []byte
}

TxOut defines a Decred transaction output.

func NewTxOut 

func NewTxOut(value int64, pkScript []byte) *TxOut

NewTxOut returns a new Decred transaction output with the provided transaction value and public key script.

func (*TxOut) SerializeSize 

func (t *TxOut) SerializeSize() int

SerializeSize returns the number of bytes it would take to serialize the the transaction output.

type TxSerializeType 

type TxSerializeType uint16

TxSerializeType represents the serialized type of a transaction. 

const (
	// TxSerializeFull indicates a transaction be serialized with the prefix
	// and all witness data.
	TxSerializeFull TxSerializeType = iota

	// TxSerializeNoWitness indicates a transaction be serialized with only
	// the prefix.
	TxSerializeNoWitness

	// TxSerializeOnlyWitness indicates a transaction be serialized with
	// only the witness data.
	TxSerializeOnlyWitness
)

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.