route53

package
v1.11.0 Latest Latest
Warning

This package is not in the latest version of its module.

Go to latest
Published: Dec 6, 2022 License: Apache-2.0 Imports: 16 Imported by: 0

Documentation

Overview

Package route53 provides the client and types for making API requests to Amazon Route 53.

See https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01 for more information on this service.

See route53 package documentation for more information. https://docs.aws.amazon.com/sdk-for-go/api/service/route53/

Using the Client

To Amazon Route 53 with the SDK use the New function to create a new service client. With that client you can make API requests to the service. These clients are safe to use concurrently.

See the SDK's documentation for more information on how to use the SDK. https://docs.aws.amazon.com/sdk-for-go/api/

See aws.Config documentation for more information on configuring SDK clients. https://docs.aws.amazon.com/sdk-for-go/api/aws/#Config

See the Amazon Route 53 client Route53 for more information on creating client for this service. https://docs.aws.amazon.com/sdk-for-go/api/service/route53/#New

Index

Examples

Constants

View Source
const (
	// ChangeActionCreate is a ChangeAction enum value
	ChangeActionCreate = "CREATE"

	// ChangeActionDelete is a ChangeAction enum value
	ChangeActionDelete = "DELETE"

	// ChangeActionUpsert is a ChangeAction enum value
	ChangeActionUpsert = "UPSERT"
)
View Source
const (
	// ChangeStatusPending is a ChangeStatus enum value
	ChangeStatusPending = "PENDING"

	// ChangeStatusInsync is a ChangeStatus enum value
	ChangeStatusInsync = "INSYNC"
)
View Source
const (
	// CloudWatchRegionUsEast1 is a CloudWatchRegion enum value
	CloudWatchRegionUsEast1 = "us-east-1"

	// CloudWatchRegionUsEast2 is a CloudWatchRegion enum value
	CloudWatchRegionUsEast2 = "us-east-2"

	// CloudWatchRegionUsWest1 is a CloudWatchRegion enum value
	CloudWatchRegionUsWest1 = "us-west-1"

	// CloudWatchRegionUsWest2 is a CloudWatchRegion enum value
	CloudWatchRegionUsWest2 = "us-west-2"

	// CloudWatchRegionCaCentral1 is a CloudWatchRegion enum value
	CloudWatchRegionCaCentral1 = "ca-central-1"

	// CloudWatchRegionEuCentral1 is a CloudWatchRegion enum value
	CloudWatchRegionEuCentral1 = "eu-central-1"

	// CloudWatchRegionEuWest1 is a CloudWatchRegion enum value
	CloudWatchRegionEuWest1 = "eu-west-1"

	// CloudWatchRegionEuWest2 is a CloudWatchRegion enum value
	CloudWatchRegionEuWest2 = "eu-west-2"

	// CloudWatchRegionApSouth1 is a CloudWatchRegion enum value
	CloudWatchRegionApSouth1 = "ap-south-1"

	// CloudWatchRegionApSoutheast1 is a CloudWatchRegion enum value
	CloudWatchRegionApSoutheast1 = "ap-southeast-1"

	// CloudWatchRegionApSoutheast2 is a CloudWatchRegion enum value
	CloudWatchRegionApSoutheast2 = "ap-southeast-2"

	// CloudWatchRegionApNortheast1 is a CloudWatchRegion enum value
	CloudWatchRegionApNortheast1 = "ap-northeast-1"

	// CloudWatchRegionApNortheast2 is a CloudWatchRegion enum value
	CloudWatchRegionApNortheast2 = "ap-northeast-2"

	// CloudWatchRegionSaEast1 is a CloudWatchRegion enum value
	CloudWatchRegionSaEast1 = "sa-east-1"
)
View Source
const (
	// ComparisonOperatorGreaterThanOrEqualToThreshold is a ComparisonOperator enum value
	ComparisonOperatorGreaterThanOrEqualToThreshold = "GreaterThanOrEqualToThreshold"

	// ComparisonOperatorGreaterThanThreshold is a ComparisonOperator enum value
	ComparisonOperatorGreaterThanThreshold = "GreaterThanThreshold"

	// ComparisonOperatorLessThanThreshold is a ComparisonOperator enum value
	ComparisonOperatorLessThanThreshold = "LessThanThreshold"

	// ComparisonOperatorLessThanOrEqualToThreshold is a ComparisonOperator enum value
	ComparisonOperatorLessThanOrEqualToThreshold = "LessThanOrEqualToThreshold"
)
View Source
const (
	// HealthCheckRegionUsEast1 is a HealthCheckRegion enum value
	HealthCheckRegionUsEast1 = "us-east-1"

	// HealthCheckRegionUsWest1 is a HealthCheckRegion enum value
	HealthCheckRegionUsWest1 = "us-west-1"

	// HealthCheckRegionUsWest2 is a HealthCheckRegion enum value
	HealthCheckRegionUsWest2 = "us-west-2"

	// HealthCheckRegionEuWest1 is a HealthCheckRegion enum value
	HealthCheckRegionEuWest1 = "eu-west-1"

	// HealthCheckRegionApSoutheast1 is a HealthCheckRegion enum value
	HealthCheckRegionApSoutheast1 = "ap-southeast-1"

	// HealthCheckRegionApSoutheast2 is a HealthCheckRegion enum value
	HealthCheckRegionApSoutheast2 = "ap-southeast-2"

	// HealthCheckRegionApNortheast1 is a HealthCheckRegion enum value
	HealthCheckRegionApNortheast1 = "ap-northeast-1"

	// HealthCheckRegionSaEast1 is a HealthCheckRegion enum value
	HealthCheckRegionSaEast1 = "sa-east-1"
)
View Source
const (
	// HealthCheckTypeHttp is a HealthCheckType enum value
	HealthCheckTypeHttp = "HTTP"

	// HealthCheckTypeHttps is a HealthCheckType enum value
	HealthCheckTypeHttps = "HTTPS"

	// HealthCheckTypeHttpStrMatch is a HealthCheckType enum value
	HealthCheckTypeHttpStrMatch = "HTTP_STR_MATCH"

	// HealthCheckTypeHttpsStrMatch is a HealthCheckType enum value
	HealthCheckTypeHttpsStrMatch = "HTTPS_STR_MATCH"

	// HealthCheckTypeTcp is a HealthCheckType enum value
	HealthCheckTypeTcp = "TCP"

	// HealthCheckTypeCalculated is a HealthCheckType enum value
	HealthCheckTypeCalculated = "CALCULATED"

	// HealthCheckTypeCloudwatchMetric is a HealthCheckType enum value
	HealthCheckTypeCloudwatchMetric = "CLOUDWATCH_METRIC"
)
View Source
const (
	// InsufficientDataHealthStatusHealthy is a InsufficientDataHealthStatus enum value
	InsufficientDataHealthStatusHealthy = "Healthy"

	// InsufficientDataHealthStatusUnhealthy is a InsufficientDataHealthStatus enum value
	InsufficientDataHealthStatusUnhealthy = "Unhealthy"

	// InsufficientDataHealthStatusLastKnownStatus is a InsufficientDataHealthStatus enum value
	InsufficientDataHealthStatusLastKnownStatus = "LastKnownStatus"
)
View Source
const (
	// RRTypeSoa is a RRType enum value
	RRTypeSoa = "SOA"

	// RRTypeA is a RRType enum value
	RRTypeA = "A"

	// RRTypeTxt is a RRType enum value
	RRTypeTxt = "TXT"

	// RRTypeNs is a RRType enum value
	RRTypeNs = "NS"

	// RRTypeCname is a RRType enum value
	RRTypeCname = "CNAME"

	// RRTypeMx is a RRType enum value
	RRTypeMx = "MX"

	// RRTypeNaptr is a RRType enum value
	RRTypeNaptr = "NAPTR"

	// RRTypePtr is a RRType enum value
	RRTypePtr = "PTR"

	// RRTypeSrv is a RRType enum value
	RRTypeSrv = "SRV"

	// RRTypeSpf is a RRType enum value
	RRTypeSpf = "SPF"

	// RRTypeAaaa is a RRType enum value
	RRTypeAaaa = "AAAA"

	// RRTypeCaa is a RRType enum value
	RRTypeCaa = "CAA"
)
View Source
const (
	// ResourceRecordSetFailoverPrimary is a ResourceRecordSetFailover enum value
	ResourceRecordSetFailoverPrimary = "PRIMARY"

	// ResourceRecordSetFailoverSecondary is a ResourceRecordSetFailover enum value
	ResourceRecordSetFailoverSecondary = "SECONDARY"
)
View Source
const (
	// ResourceRecordSetRegionUsEast1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionUsEast1 = "us-east-1"

	// ResourceRecordSetRegionUsEast2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionUsEast2 = "us-east-2"

	// ResourceRecordSetRegionUsWest1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionUsWest1 = "us-west-1"

	// ResourceRecordSetRegionUsWest2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionUsWest2 = "us-west-2"

	// ResourceRecordSetRegionCaCentral1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionCaCentral1 = "ca-central-1"

	// ResourceRecordSetRegionEuWest1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionEuWest1 = "eu-west-1"

	// ResourceRecordSetRegionEuWest2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionEuWest2 = "eu-west-2"

	// ResourceRecordSetRegionEuCentral1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionEuCentral1 = "eu-central-1"

	// ResourceRecordSetRegionApSoutheast1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApSoutheast1 = "ap-southeast-1"

	// ResourceRecordSetRegionApSoutheast2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApSoutheast2 = "ap-southeast-2"

	// ResourceRecordSetRegionApNortheast1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApNortheast1 = "ap-northeast-1"

	// ResourceRecordSetRegionApNortheast2 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApNortheast2 = "ap-northeast-2"

	// ResourceRecordSetRegionSaEast1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionSaEast1 = "sa-east-1"

	// ResourceRecordSetRegionCnNorth1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionCnNorth1 = "cn-north-1"

	// ResourceRecordSetRegionApSouth1 is a ResourceRecordSetRegion enum value
	ResourceRecordSetRegionApSouth1 = "ap-south-1"
)
View Source
const (
	// StatisticAverage is a Statistic enum value
	StatisticAverage = "Average"

	// StatisticSum is a Statistic enum value
	StatisticSum = "Sum"

	// StatisticSampleCount is a Statistic enum value
	StatisticSampleCount = "SampleCount"

	// StatisticMaximum is a Statistic enum value
	StatisticMaximum = "Maximum"

	// StatisticMinimum is a Statistic enum value
	StatisticMinimum = "Minimum"
)
View Source
const (
	// TagResourceTypeHealthcheck is a TagResourceType enum value
	TagResourceTypeHealthcheck = "healthcheck"

	// TagResourceTypeHostedzone is a TagResourceType enum value
	TagResourceTypeHostedzone = "hostedzone"
)
View Source
const (
	// VPCRegionUsEast1 is a VPCRegion enum value
	VPCRegionUsEast1 = "us-east-1"

	// VPCRegionUsEast2 is a VPCRegion enum value
	VPCRegionUsEast2 = "us-east-2"

	// VPCRegionUsWest1 is a VPCRegion enum value
	VPCRegionUsWest1 = "us-west-1"

	// VPCRegionUsWest2 is a VPCRegion enum value
	VPCRegionUsWest2 = "us-west-2"

	// VPCRegionEuWest1 is a VPCRegion enum value
	VPCRegionEuWest1 = "eu-west-1"

	// VPCRegionEuWest2 is a VPCRegion enum value
	VPCRegionEuWest2 = "eu-west-2"

	// VPCRegionEuCentral1 is a VPCRegion enum value
	VPCRegionEuCentral1 = "eu-central-1"

	// VPCRegionApSoutheast1 is a VPCRegion enum value
	VPCRegionApSoutheast1 = "ap-southeast-1"

	// VPCRegionApSoutheast2 is a VPCRegion enum value
	VPCRegionApSoutheast2 = "ap-southeast-2"

	// VPCRegionApSouth1 is a VPCRegion enum value
	VPCRegionApSouth1 = "ap-south-1"

	// VPCRegionApNortheast1 is a VPCRegion enum value
	VPCRegionApNortheast1 = "ap-northeast-1"

	// VPCRegionApNortheast2 is a VPCRegion enum value
	VPCRegionApNortheast2 = "ap-northeast-2"

	// VPCRegionSaEast1 is a VPCRegion enum value
	VPCRegionSaEast1 = "sa-east-1"

	// VPCRegionCaCentral1 is a VPCRegion enum value
	VPCRegionCaCentral1 = "ca-central-1"

	// VPCRegionCnNorth1 is a VPCRegion enum value
	VPCRegionCnNorth1 = "cn-north-1"
)
View Source
const (

	// ErrCodeConcurrentModification for service response error code
	// "ConcurrentModification".
	//
	// Another user submitted a request to create, update, or delete the object
	// at the same time that you did. Retry the request.
	ErrCodeConcurrentModification = "ConcurrentModification"

	// ErrCodeConflictingDomainExists for service response error code
	// "ConflictingDomainExists".
	//
	// The cause of this error depends on whether you're trying to create a public
	// or a private hosted zone:
	//
	//    * Public hosted zone: Two hosted zones that have the same name or that
	//    have a parent/child relationship (example.com and test.example.com) can't
	//    have any common name servers. You tried to create a hosted zone that has
	//    the same name as an existing hosted zone or that's the parent or child
	//    of an existing hosted zone, and you specified a delegation set that shares
	//    one or more name servers with the existing hosted zone.
	//
	//    * Private hosted zone: You specified an Amazon VPC that you're already
	//    using for another hosted zone, and the domain that you specified for one
	//    of the hosted zones is a subdomain of the domain that you specified for
	//    the other hosted zone. For example, you can't use the same Amazon VPC
	//    for the hosted zones for example.com and test.example.com.
	ErrCodeConflictingDomainExists = "ConflictingDomainExists"

	// ErrCodeConflictingTypes for service response error code
	// "ConflictingTypes".
	//
	// You tried to update a traffic policy instance by using a traffic policy version
	// that has a different DNS type than the current type for the instance. You
	// specified the type in the JSON document in the CreateTrafficPolicy or CreateTrafficPolicyVersionrequest.
	ErrCodeConflictingTypes = "ConflictingTypes"

	// ErrCodeDelegationSetAlreadyCreated for service response error code
	// "DelegationSetAlreadyCreated".
	//
	// A delegation set with the same owner and caller reference combination has
	// already been created.
	ErrCodeDelegationSetAlreadyCreated = "DelegationSetAlreadyCreated"

	// ErrCodeDelegationSetAlreadyReusable for service response error code
	// "DelegationSetAlreadyReusable".
	//
	// The specified delegation set has already been marked as reusable.
	ErrCodeDelegationSetAlreadyReusable = "DelegationSetAlreadyReusable"

	// ErrCodeDelegationSetInUse for service response error code
	// "DelegationSetInUse".
	//
	// The specified delegation contains associated hosted zones which must be deleted
	// before the reusable delegation set can be deleted.
	ErrCodeDelegationSetInUse = "DelegationSetInUse"

	// ErrCodeDelegationSetNotAvailable for service response error code
	// "DelegationSetNotAvailable".
	//
	// You can create a hosted zone that has the same name as an existing hosted
	// zone (example.com is common), but there is a limit to the number of hosted
	// zones that have the same name. If you get this error, Amazon Route 53 has
	// reached that limit. If you own the domain name and Amazon Route 53 generates
	// this error, contact Customer Support.
	ErrCodeDelegationSetNotAvailable = "DelegationSetNotAvailable"

	// ErrCodeDelegationSetNotReusable for service response error code
	// "DelegationSetNotReusable".
	//
	// A reusable delegation set with the specified ID does not exist.
	ErrCodeDelegationSetNotReusable = "DelegationSetNotReusable"

	// ErrCodeHealthCheckAlreadyExists for service response error code
	// "HealthCheckAlreadyExists".
	//
	// The health check you're attempting to create already exists. Amazon Route
	// 53 returns this error when you submit a request that has the following values:
	//
	//    * The same value for CallerReference as an existing health check, and
	//    one or more values that differ from the existing health check that has
	//    the same caller reference.
	//
	//    * The same value for CallerReference as a health check that you created
	//    and later deleted, regardless of the other settings in the request.
	ErrCodeHealthCheckAlreadyExists = "HealthCheckAlreadyExists"

	// ErrCodeHealthCheckInUse for service response error code
	// "HealthCheckInUse".
	//
	// This error code is not in use.
	ErrCodeHealthCheckInUse = "HealthCheckInUse"

	// ErrCodeHealthCheckVersionMismatch for service response error code
	// "HealthCheckVersionMismatch".
	//
	// The value of HealthCheckVersion in the request doesn't match the value of
	// HealthCheckVersion in the health check.
	ErrCodeHealthCheckVersionMismatch = "HealthCheckVersionMismatch"

	// ErrCodeHostedZoneAlreadyExists for service response error code
	// "HostedZoneAlreadyExists".
	//
	// The hosted zone you're trying to create already exists. Amazon Route 53 returns
	// this error when a hosted zone has already been created with the specified
	// CallerReference.
	ErrCodeHostedZoneAlreadyExists = "HostedZoneAlreadyExists"

	// ErrCodeHostedZoneNotEmpty for service response error code
	// "HostedZoneNotEmpty".
	//
	// The hosted zone contains resource records that are not SOA or NS records.
	ErrCodeHostedZoneNotEmpty = "HostedZoneNotEmpty"

	// ErrCodeHostedZoneNotFound for service response error code
	// "HostedZoneNotFound".
	//
	// The specified HostedZone can't be found.
	ErrCodeHostedZoneNotFound = "HostedZoneNotFound"

	// ErrCodeIncompatibleVersion for service response error code
	// "IncompatibleVersion".
	//
	// The resource you're trying to access is unsupported on this Amazon Route
	// 53 endpoint.
	ErrCodeIncompatibleVersion = "IncompatibleVersion"

	// ErrCodeInsufficientCloudWatchLogsResourcePolicy for service response error code
	// "InsufficientCloudWatchLogsResourcePolicy".
	//
	// Amazon Route 53 doesn't have the permissions required to create log streams
	// and send query logs to log streams. Possible causes include the following:
	//
	//    * There is no resource policy that specifies the log group ARN in the
	//    value for Resource.
	//
	//    * The resource policy that includes the log group ARN in the value for
	//    Resource doesn't have the necessary permissions.
	//
	//    * The resource policy hasn't finished propagating yet.
	ErrCodeInsufficientCloudWatchLogsResourcePolicy = "InsufficientCloudWatchLogsResourcePolicy"

	// ErrCodeInvalidArgument for service response error code
	// "InvalidArgument".
	//
	// Parameter name is invalid.
	ErrCodeInvalidArgument = "InvalidArgument"

	// ErrCodeInvalidChangeBatch for service response error code
	// "InvalidChangeBatch".
	//
	// This exception contains a list of messages that might contain one or more
	// error messages. Each error message indicates one error in the change batch.
	ErrCodeInvalidChangeBatch = "InvalidChangeBatch"

	// ErrCodeInvalidDomainName for service response error code
	// "InvalidDomainName".
	//
	// The specified domain name is not valid.
	ErrCodeInvalidDomainName = "InvalidDomainName"

	// ErrCodeInvalidInput for service response error code
	// "InvalidInput".
	//
	// The input is not valid.
	ErrCodeInvalidInput = "InvalidInput"

	// ErrCodeInvalidPaginationToken for service response error code
	// "InvalidPaginationToken".
	//
	// The value that you specified to get the second or subsequent page of results
	// is invalid.
	ErrCodeInvalidPaginationToken = "InvalidPaginationToken"

	// ErrCodeInvalidTrafficPolicyDocument for service response error code
	// "InvalidTrafficPolicyDocument".
	//
	// The format of the traffic policy document that you specified in the Document
	// element is invalid.
	ErrCodeInvalidTrafficPolicyDocument = "InvalidTrafficPolicyDocument"

	// ErrCodeInvalidVPCId for service response error code
	// "InvalidVPCId".
	//
	// The VPC ID that you specified either isn't a valid ID or the current account
	// is not authorized to access this VPC.
	ErrCodeInvalidVPCId = "InvalidVPCId"

	// ErrCodeLastVPCAssociation for service response error code
	// "LastVPCAssociation".
	//
	// The VPC that you're trying to disassociate from the private hosted zone is
	// the last VPC that is associated with the hosted zone. Amazon Route 53 doesn't
	// support disassociating the last VPC from a hosted zone.
	ErrCodeLastVPCAssociation = "LastVPCAssociation"

	// ErrCodeLimitsExceeded for service response error code
	// "LimitsExceeded".
	//
	// The limits specified for a resource have been exceeded.
	ErrCodeLimitsExceeded = "LimitsExceeded"

	// ErrCodeNoSuchChange for service response error code
	// "NoSuchChange".
	//
	// A change with the specified change ID does not exist.
	ErrCodeNoSuchChange = "NoSuchChange"

	// ErrCodeNoSuchCloudWatchLogsLogGroup for service response error code
	// "NoSuchCloudWatchLogsLogGroup".
	//
	// There is no CloudWatch Logs log group with the specified ARN.
	ErrCodeNoSuchCloudWatchLogsLogGroup = "NoSuchCloudWatchLogsLogGroup"

	// ErrCodeNoSuchDelegationSet for service response error code
	// "NoSuchDelegationSet".
	//
	// A reusable delegation set with the specified ID does not exist.
	ErrCodeNoSuchDelegationSet = "NoSuchDelegationSet"

	// ErrCodeNoSuchGeoLocation for service response error code
	// "NoSuchGeoLocation".
	//
	// Amazon Route 53 doesn't support the specified geolocation.
	ErrCodeNoSuchGeoLocation = "NoSuchGeoLocation"

	// ErrCodeNoSuchHealthCheck for service response error code
	// "NoSuchHealthCheck".
	//
	// No health check exists with the ID that you specified in the DeleteHealthCheck
	// request.
	ErrCodeNoSuchHealthCheck = "NoSuchHealthCheck"

	// ErrCodeNoSuchHostedZone for service response error code
	// "NoSuchHostedZone".
	//
	// No hosted zone exists with the ID that you specified.
	ErrCodeNoSuchHostedZone = "NoSuchHostedZone"

	// ErrCodeNoSuchQueryLoggingConfig for service response error code
	// "NoSuchQueryLoggingConfig".
	//
	// There is no DNS query logging configuration with the specified ID.
	ErrCodeNoSuchQueryLoggingConfig = "NoSuchQueryLoggingConfig"

	// ErrCodeNoSuchTrafficPolicy for service response error code
	// "NoSuchTrafficPolicy".
	//
	// No traffic policy exists with the specified ID.
	ErrCodeNoSuchTrafficPolicy = "NoSuchTrafficPolicy"

	// ErrCodeNoSuchTrafficPolicyInstance for service response error code
	// "NoSuchTrafficPolicyInstance".
	//
	// No traffic policy instance exists with the specified ID.
	ErrCodeNoSuchTrafficPolicyInstance = "NoSuchTrafficPolicyInstance"

	// ErrCodeNotAuthorizedException for service response error code
	// "NotAuthorizedException".
	//
	// Associating the specified VPC with the specified hosted zone has not been
	// authorized.
	ErrCodeNotAuthorizedException = "NotAuthorizedException"

	// ErrCodePriorRequestNotComplete for service response error code
	// "PriorRequestNotComplete".
	//
	// If Amazon Route 53 can't process a request before the next request arrives,
	// it will reject subsequent requests for the same hosted zone and return an
	// HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly
	// for the same request, we recommend that you wait, in intervals of increasing
	// duration, before you try the request again.
	ErrCodePriorRequestNotComplete = "PriorRequestNotComplete"

	// ErrCodePublicZoneVPCAssociation for service response error code
	// "PublicZoneVPCAssociation".
	//
	// You're trying to associate a VPC with a public hosted zone. Amazon Route
	// 53 doesn't support associating a VPC with a public hosted zone.
	ErrCodePublicZoneVPCAssociation = "PublicZoneVPCAssociation"

	// ErrCodeQueryLoggingConfigAlreadyExists for service response error code
	// "QueryLoggingConfigAlreadyExists".
	//
	// You can create only one query logging configuration for a hosted zone, and
	// a query logging configuration already exists for this hosted zone.
	ErrCodeQueryLoggingConfigAlreadyExists = "QueryLoggingConfigAlreadyExists"

	// ErrCodeThrottlingException for service response error code
	// "ThrottlingException".
	//
	// The limit on the number of requests per second was exceeded.
	ErrCodeThrottlingException = "ThrottlingException"

	// ErrCodeTooManyHealthChecks for service response error code
	// "TooManyHealthChecks".
	//
	// You have reached the maximum number of active health checks for an AWS account.
	// The default limit is 100. To request a higher limit, create a case (http://aws.amazon.com/route53-request)
	// with the AWS Support Center.
	ErrCodeTooManyHealthChecks = "TooManyHealthChecks"

	// ErrCodeTooManyHostedZones for service response error code
	// "TooManyHostedZones".
	//
	// This hosted zone can't be created because the hosted zone limit is exceeded.
	// To request a limit increase, go to the Amazon Route 53 Contact Us (http://aws.amazon.com/route53-request/)
	// page.
	ErrCodeTooManyHostedZones = "TooManyHostedZones"

	// ErrCodeTooManyTrafficPolicies for service response error code
	// "TooManyTrafficPolicies".
	//
	// You've created the maximum number of traffic policies that can be created
	// for the current AWS account. You can request an increase to the limit on
	// the Contact Us (http://aws.amazon.com/route53-request/) page.
	ErrCodeTooManyTrafficPolicies = "TooManyTrafficPolicies"

	// ErrCodeTooManyTrafficPolicyInstances for service response error code
	// "TooManyTrafficPolicyInstances".
	//
	// You've created the maximum number of traffic policy instances that can be
	// created for the current AWS account. You can request an increase to the limit
	// on the Contact Us (http://aws.amazon.com/route53-request/) page.
	ErrCodeTooManyTrafficPolicyInstances = "TooManyTrafficPolicyInstances"

	// ErrCodeTooManyVPCAssociationAuthorizations for service response error code
	// "TooManyVPCAssociationAuthorizations".
	//
	// You've created the maximum number of authorizations that can be created for
	// the specified hosted zone. To authorize another VPC to be associated with
	// the hosted zone, submit a DeleteVPCAssociationAuthorization request to remove
	// an existing authorization. To get a list of existing authorizations, submit
	// a ListVPCAssociationAuthorizations request.
	ErrCodeTooManyVPCAssociationAuthorizations = "TooManyVPCAssociationAuthorizations"

	// ErrCodeTrafficPolicyAlreadyExists for service response error code
	// "TrafficPolicyAlreadyExists".
	//
	// A traffic policy that has the same value for Name already exists.
	ErrCodeTrafficPolicyAlreadyExists = "TrafficPolicyAlreadyExists"

	// ErrCodeTrafficPolicyInUse for service response error code
	// "TrafficPolicyInUse".
	//
	// One or more traffic policy instances were created by using the specified
	// traffic policy.
	ErrCodeTrafficPolicyInUse = "TrafficPolicyInUse"

	// ErrCodeTrafficPolicyInstanceAlreadyExists for service response error code
	// "TrafficPolicyInstanceAlreadyExists".
	//
	// There is already a traffic policy instance with the specified ID.
	ErrCodeTrafficPolicyInstanceAlreadyExists = "TrafficPolicyInstanceAlreadyExists"

	// ErrCodeVPCAssociationAuthorizationNotFound for service response error code
	// "VPCAssociationAuthorizationNotFound".
	//
	// The VPC that you specified is not authorized to be associated with the hosted
	// zone.
	ErrCodeVPCAssociationAuthorizationNotFound = "VPCAssociationAuthorizationNotFound"

	// ErrCodeVPCAssociationNotFound for service response error code
	// "VPCAssociationNotFound".
	//
	// The specified VPC and hosted zone are not currently associated.
	ErrCodeVPCAssociationNotFound = "VPCAssociationNotFound"
)
View Source
const (
	ServiceName = "route53"   // Service endpoint prefix API calls made to.
	EndpointsID = ServiceName // Service ID for Regions and Endpoints metadata.
)

Service information constants

Variables

This section is empty.

Functions

This section is empty.

Types

type AlarmIdentifier

type AlarmIdentifier struct {

	// The name of the CloudWatch alarm that you want Amazon Route 53 health checkers
	// to use to determine whether this health check is healthy.
	//
	// Name is a required field
	Name *string `min:"1" type:"string" required:"true"`

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	//
	// For the current list of CloudWatch regions, see Amazon CloudWatch (http://docs.aws.amazon.com/general/latest/gr/rande.html#cw_region)
	// in the AWS Regions and Endpoints chapter of the Amazon Web Services General
	// Reference.
	//
	// Region is a required field
	Region *string `min:"1" type:"string" required:"true" enum:"CloudWatchRegion"`
	// contains filtered or unexported fields
}

A complex type that identifies the CloudWatch alarm that you want Amazon Route 53 health checkers to use to determine whether this health check is healthy. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/AlarmIdentifier

func (AlarmIdentifier) GoString

func (s AlarmIdentifier) GoString() string

GoString returns the string representation

func (*AlarmIdentifier) MarshalFields

func (s *AlarmIdentifier) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*AlarmIdentifier) SetName

func (s *AlarmIdentifier) SetName(v string) *AlarmIdentifier

SetName sets the Name field's value.

func (*AlarmIdentifier) SetRegion

func (s *AlarmIdentifier) SetRegion(v string) *AlarmIdentifier

SetRegion sets the Region field's value.

func (AlarmIdentifier) String

func (s AlarmIdentifier) String() string

String returns the string representation

func (*AlarmIdentifier) Validate

func (s *AlarmIdentifier) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AliasTarget

type AliasTarget struct {

	// Alias resource record sets only: The value that you specify depends on where
	// you want to route queries:
	//
	// CloudFront distributionSpecify the domain name that CloudFront assigned when
	// you created your distribution.
	//
	// Your CloudFront distribution must include an alternate domain name that matches
	// the name of the resource record set. For example, if the name of the resource
	// record set is acme.example.com, your CloudFront distribution must include
	// acme.example.com as one of the alternate domain names. For more information,
	// see Using Alternate Domain Names (CNAMEs) (http://docs.aws.amazon.com/AmazonCloudFront/latest/DeveloperGuide/CNAMEs.html)
	// in the Amazon CloudFront Developer Guide.
	//
	// Elastic Beanstalk environmentSpecify the CNAME attribute for the environment.
	// (The environment must have a regionalized domain name.) You can use the following
	// methods to get the value of the CNAME attribute:
	//
	// AWS Management Console: For information about how to get the value by using
	// the console, see Using Custom Domains with AWS Elastic Beanstalk (http://docs.aws.amazon.com/elasticbeanstalk/latest/dg/customdomains.html)
	// in the AWS Elastic Beanstalk Developer Guide.
	//
	// Elastic Beanstalk API: Use the DescribeEnvironments action to get the value
	// of the CNAME attribute. For more information, see DescribeEnvironments (http://docs.aws.amazon.com/elasticbeanstalk/latest/api/API_DescribeEnvironments.html)
	// in the AWS Elastic Beanstalk API Reference.
	//
	// AWS CLI: Use the describe-environments command to get the value of the CNAME
	// attribute. For more information, see describe-environments (http://docs.aws.amazon.com/cli/latest/reference/elasticbeanstalk/describe-environments.html)
	// in the AWS Command Line Interface Reference.
	//
	// ELB load balancerSpecify the DNS name that is associated with the load balancer.
	// Get the DNS name by using the AWS Management Console, the ELB API, or the
	// AWS CLI.
	//
	// AWS Management Console: Go to the EC2 page, choose Load Balancers in the
	// navigation pane, choose the load balancer, choose the Description tab, and
	// get the value of the DNS name field. (If you're routing traffic to a Classic
	// Load Balancer, get the value that begins with dualstack.)
	//
	// Elastic Load Balancing API: Use DescribeLoadBalancers to get the value of
	// DNSName. For more information, see the applicable guide:
	//
	// Classic Load Balancer: DescribeLoadBalancers (http://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html)
	//
	// Application Load Balancer: DescribeLoadBalancers (http://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html)
	//
	// AWS CLI: Use describe-load-balancers (http://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html)
	// to get the value of DNSName.
	//
	// Amazon S3 bucket that is configured as a static websiteSpecify the domain
	// name of the Amazon S3 website endpoint in which you created the bucket, for
	// example, s3-website-us-east-2.amazonaws.com. For more information about valid
	// values, see the table Amazon Simple Storage Service (S3) Website Endpoints
	// (http://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region) in the
	// Amazon Web Services General Reference. For more information about using S3
	// buckets for websites, see Getting Started with Amazon Route 53 (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/getting-started.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// Another Amazon Route 53 resource record setSpecify the value of the Name
	// element for a resource record set in the current hosted zone.
	//
	// DNSName is a required field
	DNSName *string `type:"string" required:"true"`

	// Applies only to alias, failover alias, geolocation alias, latency alias,
	// and weighted alias resource record sets: When EvaluateTargetHealth is true,
	// an alias resource record set inherits the health of the referenced AWS resource,
	// such as an ELB load balancer, or the referenced resource record set.
	//
	// Note the following:
	//
	//    * You can't set EvaluateTargetHealth to true when the alias target is
	//    a CloudFront distribution.
	//
	//    * If the AWS resource that you specify in AliasTarget is a resource record
	//    set or a group of resource record sets (for example, a group of weighted
	//    resource record sets), but it is not another alias resource record set,
	//    we recommend that you associate a health check with all of the resource
	//    record sets in the alias target. For more information, see What Happens
	//    When You Omit Health Checks? (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html#dns-failover-complex-configs-hc-omitting)
	//    in the Amazon Route 53 Developer Guide.
	//
	//    * If you specify an Elastic Beanstalk environment in HostedZoneId and
	//    DNSName, and if the environment contains an ELB load balancer, Elastic
	//    Load Balancing routes queries only to the healthy Amazon EC2 instances
	//    that are registered with the load balancer. (An environment automatically
	//    contains an ELB load balancer if it includes more than one EC2 instance.)
	//    If you set EvaluateTargetHealth to true and either no EC2 instances are
	//    healthy or the load balancer itself is unhealthy, Amazon Route 53 routes
	//    queries to other available resources that are healthy, if any.
	//
	// If the environment contains a single EC2 instance, there are no special requirements.
	//
	//    * If you specify an ELB load balancer in AliasTarget, ELB routes queries
	//    only to the healthy EC2 instances that are registered with the load balancer.
	//    If no EC2 instances are healthy or if the load balancer itself is unhealthy,
	//    and if EvaluateTargetHealth is true for the corresponding alias resource
	//    record set, Amazon Route 53 routes queries to other resources. When you
	//    create a load balancer, you configure settings for ELB health checks;
	//    they're not Amazon Route 53 health checks, but they perform a similar
	//    function. Do not create Amazon Route 53 health checks for the EC2 instances
	//    that you register with an ELB load balancer.
	//
	// For more information, see How Health Checks Work in More Complex Amazon Route
	//    53 Configurations (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-complex-configs.html)
	//    in the Amazon Route 53 Developer Guide.
	//
	//    * We recommend that you set EvaluateTargetHealth to true only when you
	//    have enough idle capacity to handle the failure of one or more endpoints.
	//
	// For more information and examples, see Amazon Route 53 Health Checks and
	// DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// EvaluateTargetHealth is a required field
	EvaluateTargetHealth *bool `type:"boolean" required:"true"`

	// Alias resource records sets only: The value used depends on where you want
	// to route traffic:
	//
	// CloudFront distributionSpecify Z2FDTNDATAQYW2.
	//
	// Alias resource record sets for CloudFront can't be created in a private zone.
	//
	// Elastic Beanstalk environmentSpecify the hosted zone ID for the region in
	// which you created the environment. The environment must have a regionalized
	// subdomain. For a list of regions and the corresponding hosted zone IDs, see
	// AWS Elastic Beanstalk (http://docs.aws.amazon.com/general/latest/gr/rande.html#elasticbeanstalk_region)
	// in the "AWS Regions and Endpoints" chapter of the Amazon Web Services General
	// Reference.
	//
	// ELB load balancerSpecify the value of the hosted zone ID for the load balancer.
	// Use the following methods to get the hosted zone ID:
	//
	// Elastic Load Balancing (http://docs.aws.amazon.com/general/latest/gr/rande.html#elb_region)
	// table in the "AWS Regions and Endpoints" chapter of the Amazon Web Services
	// General Reference: Use the value in the "Amazon Route 53 Hosted Zone ID"
	// column that corresponds with the region that you created your load balancer
	// in.
	//
	// AWS Management Console: Go to the Amazon EC2 page, click Load Balancers in
	// the navigation pane, select the load balancer, and get the value of the Hosted
	// zone field on the Description tab.
	//
	// Elastic Load Balancing API: Use DescribeLoadBalancers to get the value of
	// CanonicalHostedZoneNameId. For more information, see the applicable guide:
	//
	// Classic Load Balancer: DescribeLoadBalancers (http://docs.aws.amazon.com/elasticloadbalancing/2012-06-01/APIReference/API_DescribeLoadBalancers.html)
	//
	// Application Load Balancer: DescribeLoadBalancers (http://docs.aws.amazon.com/elasticloadbalancing/latest/APIReference/API_DescribeLoadBalancers.html)
	//
	// AWS CLI: Use describe-load-balancers (http://docs.aws.amazon.com/cli/latest/reference/elb/describe-load-balancers.html)
	// to get the value of CanonicalHostedZoneNameID.
	//
	// An Amazon S3 bucket configured as a static websiteSpecify the hosted zone
	// ID for the region that you created the bucket in. For more information about
	// valid values, see the Amazon Simple Storage Service Website Endpoints (http://docs.aws.amazon.com/general/latest/gr/rande.html#s3_region)
	// table in the "AWS Regions and Endpoints" chapter of the Amazon Web Services
	// General Reference.
	//
	// Another Amazon Route 53 resource record set in your hosted zoneSpecify the
	// hosted zone ID of your hosted zone. (An alias resource record set can't reference
	// a resource record set in a different hosted zone.)
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Alias resource record sets only: Information about the CloudFront distribution, Elastic Beanstalk environment, ELB load balancer, Amazon S3 bucket, or Amazon Route 53 resource record set that you're redirecting queries to. An Elastic Beanstalk environment must have a regionalized subdomain.

When creating resource record sets for a private hosted zone, note the following:

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/AliasTarget

func (AliasTarget) GoString

func (s AliasTarget) GoString() string

GoString returns the string representation

func (*AliasTarget) MarshalFields

func (s *AliasTarget) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*AliasTarget) SetDNSName

func (s *AliasTarget) SetDNSName(v string) *AliasTarget

SetDNSName sets the DNSName field's value.

func (*AliasTarget) SetEvaluateTargetHealth

func (s *AliasTarget) SetEvaluateTargetHealth(v bool) *AliasTarget

SetEvaluateTargetHealth sets the EvaluateTargetHealth field's value.

func (*AliasTarget) SetHostedZoneId

func (s *AliasTarget) SetHostedZoneId(v string) *AliasTarget

SetHostedZoneId sets the HostedZoneId field's value.

func (AliasTarget) String

func (s AliasTarget) String() string

String returns the string representation

func (*AliasTarget) Validate

func (s *AliasTarget) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateVPCWithHostedZoneInput

type AssociateVPCWithHostedZoneInput struct {

	// Optional: A comment about the association request.
	Comment *string `type:"string"`

	// The ID of the private hosted zone that you want to associate an Amazon VPC
	// with.
	//
	// Note that you can't associate a VPC with a hosted zone that doesn't have
	// an existing VPC association.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// A complex type that contains information about the VPC that you want to associate
	// with a private hosted zone.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to associate a VPC with a private hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/AssociateVPCWithHostedZoneRequest

func (AssociateVPCWithHostedZoneInput) GoString

GoString returns the string representation

func (*AssociateVPCWithHostedZoneInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*AssociateVPCWithHostedZoneInput) SetComment

SetComment sets the Comment field's value.

func (*AssociateVPCWithHostedZoneInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*AssociateVPCWithHostedZoneInput) SetVPC

SetVPC sets the VPC field's value.

func (AssociateVPCWithHostedZoneInput) String

String returns the string representation

func (*AssociateVPCWithHostedZoneInput) Validate

func (s *AssociateVPCWithHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AssociateVPCWithHostedZoneOutput

type AssociateVPCWithHostedZoneOutput struct {

	// A complex type that describes the changes made to your hosted zone.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the AssociateVPCWithHostedZone request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/AssociateVPCWithHostedZoneResponse

func (AssociateVPCWithHostedZoneOutput) GoString

GoString returns the string representation

func (*AssociateVPCWithHostedZoneOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*AssociateVPCWithHostedZoneOutput) SetChangeInfo

SetChangeInfo sets the ChangeInfo field's value.

func (AssociateVPCWithHostedZoneOutput) String

String returns the string representation

type Change

type Change struct {

	// The action to perform:
	//
	//    * CREATE: Creates a resource record set that has the specified values.
	//
	//    * DELETE: Deletes a existing resource record set.
	//
	// To delete the resource record set that is associated with a traffic policy
	//    instance, use DeleteTrafficPolicyInstance. Amazon Route 53 will delete
	//    the resource record set automatically. If you delete the resource record
	//    set by using ChangeResourceRecordSets, Amazon Route 53 doesn't automatically
	//    delete the traffic policy instance, and you'll continue to be charged
	//    for it even though it's no longer in use.
	//
	//    * UPSERT: If a resource record set doesn't already exist, Amazon Route
	//    53 creates it. If a resource record set does exist, Amazon Route 53 updates
	//    it with the values in the request.
	//
	// The values that you need to include in the request depend on the type of
	// resource record set that you're creating, deleting, or updating:
	//
	// Basic resource record sets (excluding alias, failover, geolocation, latency,
	// and weighted resource record sets)
	//
	//    * Name
	//
	//    * Type
	//
	//    * TTL
	//
	// Failover, geolocation, latency, or weighted resource record sets (excluding
	// alias resource record sets)
	//
	//    * Name
	//
	//    * Type
	//
	//    * TTL
	//
	//    * SetIdentifier
	//
	// Alias resource record sets (including failover alias, geolocation alias,
	// latency alias, and weighted alias resource record sets)
	//
	//    * Name
	//
	//    * Type
	//
	//    * AliasTarget (includes DNSName, EvaluateTargetHealth, and HostedZoneId)
	//
	//    * SetIdentifier (for failover, geolocation, latency, and weighted resource
	//    record sets)
	//
	// Action is a required field
	Action *string `type:"string" required:"true" enum:"ChangeAction"`

	// Information about the resource record set to create, delete, or update.
	//
	// ResourceRecordSet is a required field
	ResourceRecordSet *ResourceRecordSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

The information for each resource record set that you want to change. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/Change

func (Change) GoString

func (s Change) GoString() string

GoString returns the string representation

func (*Change) MarshalFields

func (s *Change) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*Change) SetAction

func (s *Change) SetAction(v string) *Change

SetAction sets the Action field's value.

func (*Change) SetResourceRecordSet

func (s *Change) SetResourceRecordSet(v *ResourceRecordSet) *Change

SetResourceRecordSet sets the ResourceRecordSet field's value.

func (Change) String

func (s Change) String() string

String returns the string representation

func (*Change) Validate

func (s *Change) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeBatch

type ChangeBatch struct {

	// Information about the changes to make to the record sets.
	//
	// Changes is a required field
	Changes []*Change `locationNameList:"Change" min:"1" type:"list" required:"true"`

	// Optional: Any comments you want to include about a change batch request.
	Comment *string `type:"string"`
	// contains filtered or unexported fields
}

The information for a change request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeBatch

func (ChangeBatch) GoString

func (s ChangeBatch) GoString() string

GoString returns the string representation

func (*ChangeBatch) MarshalFields

func (s *ChangeBatch) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ChangeBatch) SetChanges

func (s *ChangeBatch) SetChanges(v []*Change) *ChangeBatch

SetChanges sets the Changes field's value.

func (*ChangeBatch) SetComment

func (s *ChangeBatch) SetComment(v string) *ChangeBatch

SetComment sets the Comment field's value.

func (ChangeBatch) String

func (s ChangeBatch) String() string

String returns the string representation

func (*ChangeBatch) Validate

func (s *ChangeBatch) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeInfo

type ChangeInfo struct {

	// A complex type that describes change information about changes made to your
	// hosted zone.
	//
	// This element contains an ID that you use when performing a GetChange action
	// to get detailed information about the change.
	Comment *string `type:"string"`

	// The ID of the request.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`

	// The current state of the request. PENDING indicates that this request has
	// not yet been applied to all Amazon Route 53 DNS servers.
	//
	// Status is a required field
	Status *string `type:"string" required:"true" enum:"ChangeStatus"`

	// The date and time that the change request was submitted in ISO 8601 format
	// (https://en.wikipedia.org/wiki/ISO_8601) and Coordinated Universal Time (UTC).
	// For example, the value 2017-03-27T17:48:16.751Z represents March 27, 2017
	// at 17:48:16.751 UTC.
	//
	// SubmittedAt is a required field
	SubmittedAt *time.Time `type:"timestamp" timestampFormat:"iso8601" required:"true"`
	// contains filtered or unexported fields
}

A complex type that describes change information about changes made to your hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeInfo

func (ChangeInfo) GoString

func (s ChangeInfo) GoString() string

GoString returns the string representation

func (*ChangeInfo) MarshalFields

func (s *ChangeInfo) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ChangeInfo) SetComment

func (s *ChangeInfo) SetComment(v string) *ChangeInfo

SetComment sets the Comment field's value.

func (*ChangeInfo) SetId

func (s *ChangeInfo) SetId(v string) *ChangeInfo

SetId sets the Id field's value.

func (*ChangeInfo) SetStatus

func (s *ChangeInfo) SetStatus(v string) *ChangeInfo

SetStatus sets the Status field's value.

func (*ChangeInfo) SetSubmittedAt

func (s *ChangeInfo) SetSubmittedAt(v time.Time) *ChangeInfo

SetSubmittedAt sets the SubmittedAt field's value.

func (ChangeInfo) String

func (s ChangeInfo) String() string

String returns the string representation

type ChangeResourceRecordSetsInput

type ChangeResourceRecordSetsInput struct {

	// A complex type that contains an optional comment and the Changes element.
	//
	// ChangeBatch is a required field
	ChangeBatch *ChangeBatch `type:"structure" required:"true"`

	// The ID of the hosted zone that contains the resource record sets that you
	// want to change.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains change information for the resource record set. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeResourceRecordSetsRequest

func (ChangeResourceRecordSetsInput) GoString

GoString returns the string representation

func (*ChangeResourceRecordSetsInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ChangeResourceRecordSetsInput) SetChangeBatch

SetChangeBatch sets the ChangeBatch field's value.

func (*ChangeResourceRecordSetsInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (ChangeResourceRecordSetsInput) String

String returns the string representation

func (*ChangeResourceRecordSetsInput) Validate

func (s *ChangeResourceRecordSetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeResourceRecordSetsOutput

type ChangeResourceRecordSetsOutput struct {

	// A complex type that contains information about changes made to your hosted
	// zone.
	//
	// This element contains an ID that you use when performing a GetChange action
	// to get detailed information about the change.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the response for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeResourceRecordSetsResponse

func (ChangeResourceRecordSetsOutput) GoString

GoString returns the string representation

func (*ChangeResourceRecordSetsOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ChangeResourceRecordSetsOutput) SetChangeInfo

SetChangeInfo sets the ChangeInfo field's value.

func (ChangeResourceRecordSetsOutput) String

String returns the string representation

type ChangeTagsForResourceInput

type ChangeTagsForResourceInput struct {

	// A complex type that contains a list of the tags that you want to add to the
	// specified health check or hosted zone and/or the tags that you want to edit
	// Value for.
	//
	// You can add a maximum of 10 tags to a health check or a hosted zone.
	AddTags []*Tag `locationNameList:"Tag" min:"1" type:"list"`

	// A complex type that contains a list of the tags that you want to delete from
	// the specified health check or hosted zone. You can specify up to 10 keys.
	RemoveTagKeys []*string `locationNameList:"Key" min:"1" type:"list"`

	// The ID of the resource for which you want to add, change, or delete tags.
	//
	// ResourceId is a required field
	ResourceId *string `location:"uri" locationName:"ResourceId" type:"string" required:"true"`

	// The type of the resource.
	//
	//    * The resource type for health checks is healthcheck.
	//
	//    * The resource type for hosted zones is hostedzone.
	//
	// ResourceType is a required field
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the tags that you want to add, edit, or delete. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeTagsForResourceRequest

func (ChangeTagsForResourceInput) GoString

func (s ChangeTagsForResourceInput) GoString() string

GoString returns the string representation

func (*ChangeTagsForResourceInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ChangeTagsForResourceInput) SetAddTags

SetAddTags sets the AddTags field's value.

func (*ChangeTagsForResourceInput) SetRemoveTagKeys

SetRemoveTagKeys sets the RemoveTagKeys field's value.

func (*ChangeTagsForResourceInput) SetResourceId

SetResourceId sets the ResourceId field's value.

func (*ChangeTagsForResourceInput) SetResourceType

SetResourceType sets the ResourceType field's value.

func (ChangeTagsForResourceInput) String

String returns the string representation

func (*ChangeTagsForResourceInput) Validate

func (s *ChangeTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ChangeTagsForResourceOutput

type ChangeTagsForResourceOutput struct {
	// contains filtered or unexported fields
}

Empty response for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeTagsForResourceResponse

func (ChangeTagsForResourceOutput) GoString

func (s ChangeTagsForResourceOutput) GoString() string

GoString returns the string representation

func (*ChangeTagsForResourceOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (ChangeTagsForResourceOutput) String

String returns the string representation

type CloudWatchAlarmConfiguration

type CloudWatchAlarmConfiguration struct {

	// For the metric that the CloudWatch alarm is associated with, the arithmetic
	// operation that is used for the comparison.
	//
	// ComparisonOperator is a required field
	ComparisonOperator *string `type:"string" required:"true" enum:"ComparisonOperator"`

	// For the metric that the CloudWatch alarm is associated with, a complex type
	// that contains information about the dimensions for the metric. For information,
	// see Amazon CloudWatch Namespaces, Dimensions, and Metrics Reference (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/CW_Support_For_AWS.html)
	// in the Amazon CloudWatch User Guide.
	Dimensions []*Dimension `locationNameList:"Dimension" type:"list"`

	// For the metric that the CloudWatch alarm is associated with, the number of
	// periods that the metric is compared to the threshold.
	//
	// EvaluationPeriods is a required field
	EvaluationPeriods *int64 `min:"1" type:"integer" required:"true"`

	// The name of the CloudWatch metric that the alarm is associated with.
	//
	// MetricName is a required field
	MetricName *string `min:"1" type:"string" required:"true"`

	// The namespace of the metric that the alarm is associated with. For more information,
	// see Amazon CloudWatch Namespaces, Dimensions, and Metrics Reference (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/CW_Support_For_AWS.html)
	// in the Amazon CloudWatch User Guide.
	//
	// Namespace is a required field
	Namespace *string `min:"1" type:"string" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the duration
	// of one evaluation period in seconds.
	//
	// Period is a required field
	Period *int64 `min:"60" type:"integer" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the statistic
	// that is applied to the metric.
	//
	// Statistic is a required field
	Statistic *string `type:"string" required:"true" enum:"Statistic"`

	// For the metric that the CloudWatch alarm is associated with, the value the
	// metric is compared with.
	//
	// Threshold is a required field
	Threshold *float64 `type:"double" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the CloudWatch alarm that Amazon Route 53 is monitoring for this health check. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CloudWatchAlarmConfiguration

func (CloudWatchAlarmConfiguration) GoString

func (s CloudWatchAlarmConfiguration) GoString() string

GoString returns the string representation

func (*CloudWatchAlarmConfiguration) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CloudWatchAlarmConfiguration) SetComparisonOperator

SetComparisonOperator sets the ComparisonOperator field's value.

func (*CloudWatchAlarmConfiguration) SetDimensions

SetDimensions sets the Dimensions field's value.

func (*CloudWatchAlarmConfiguration) SetEvaluationPeriods

SetEvaluationPeriods sets the EvaluationPeriods field's value.

func (*CloudWatchAlarmConfiguration) SetMetricName

SetMetricName sets the MetricName field's value.

func (*CloudWatchAlarmConfiguration) SetNamespace

SetNamespace sets the Namespace field's value.

func (*CloudWatchAlarmConfiguration) SetPeriod

SetPeriod sets the Period field's value.

func (*CloudWatchAlarmConfiguration) SetStatistic

SetStatistic sets the Statistic field's value.

func (*CloudWatchAlarmConfiguration) SetThreshold

SetThreshold sets the Threshold field's value.

func (CloudWatchAlarmConfiguration) String

String returns the string representation

type CreateHealthCheckInput

type CreateHealthCheckInput struct {

	// A unique string that identifies the request and that allows you to retry
	// a failed CreateHealthCheck request without the risk of creating two identical
	// health checks:
	//
	//    * If you send a CreateHealthCheck request with the same CallerReference
	//    and settings as a previous request, and if the health check doesn't exist,
	//    Amazon Route 53 creates the health check. If the health check does exist,
	//    Amazon Route 53 returns the settings for the existing health check.
	//
	//    * If you send a CreateHealthCheck request with the same CallerReference
	//    as a deleted health check, regardless of the settings, Amazon Route 53
	//    returns a HealthCheckAlreadyExists error.
	//
	//    * If you send a CreateHealthCheck request with the same CallerReference
	//    as an existing health check but with different settings, Amazon Route
	//    53 returns a HealthCheckAlreadyExists error.
	//
	//    * If you send a CreateHealthCheck request with a unique CallerReference
	//    but settings identical to an existing health check, Amazon Route 53 creates
	//    the health check.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that contains the response to a CreateHealthCheck request.
	//
	// HealthCheckConfig is a required field
	HealthCheckConfig *HealthCheckConfig `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the health check request information. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateHealthCheckRequest

func (CreateHealthCheckInput) GoString

func (s CreateHealthCheckInput) GoString() string

GoString returns the string representation

func (*CreateHealthCheckInput) MarshalFields

func (s *CreateHealthCheckInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateHealthCheckInput) SetCallerReference

func (s *CreateHealthCheckInput) SetCallerReference(v string) *CreateHealthCheckInput

SetCallerReference sets the CallerReference field's value.

func (*CreateHealthCheckInput) SetHealthCheckConfig

SetHealthCheckConfig sets the HealthCheckConfig field's value.

func (CreateHealthCheckInput) String

func (s CreateHealthCheckInput) String() string

String returns the string representation

func (*CreateHealthCheckInput) Validate

func (s *CreateHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateHealthCheckOutput

type CreateHealthCheckOutput struct {

	// A complex type that contains identifying information about the health check.
	//
	// HealthCheck is a required field
	HealthCheck *HealthCheck `type:"structure" required:"true"`

	// The unique URL representing the new health check.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the new health check. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateHealthCheckResponse

func (CreateHealthCheckOutput) GoString

func (s CreateHealthCheckOutput) GoString() string

GoString returns the string representation

func (*CreateHealthCheckOutput) MarshalFields

func (s *CreateHealthCheckOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateHealthCheckOutput) SetHealthCheck

SetHealthCheck sets the HealthCheck field's value.

func (*CreateHealthCheckOutput) SetLocation

SetLocation sets the Location field's value.

func (CreateHealthCheckOutput) String

func (s CreateHealthCheckOutput) String() string

String returns the string representation

type CreateHostedZoneInput

type CreateHostedZoneInput struct {

	// A unique string that identifies the request and that allows failed CreateHostedZone
	// requests to be retried without the risk of executing the operation twice.
	// You must use a unique CallerReference string every time you submit a CreateHostedZone
	// request. CallerReference can be any unique string, for example, a date/time
	// stamp.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// If you want to associate a reusable delegation set with this hosted zone,
	// the ID that Amazon Route 53 assigned to the reusable delegation set when
	// you created it. For more information about reusable delegation sets, see
	// CreateReusableDelegationSet.
	DelegationSetId *string `type:"string"`

	// (Optional) A complex type that contains the following optional values:
	//
	//    * For public and private hosted zones, an optional comment
	//
	//    * For private hosted zones, an optional PrivateZone element
	//
	// If you don't specify a comment or the PrivateZone element, omit HostedZoneConfig
	// and the other elements.
	HostedZoneConfig *HostedZoneConfig `type:"structure"`

	// The name of the domain. For resource record types that include a domain name,
	// specify a fully qualified domain name, for example, www.example.com. The
	// trailing dot is optional; Amazon Route 53 assumes that the domain name is
	// fully qualified. This means that Amazon Route 53 treats www.example.com (without
	// a trailing dot) and www.example.com. (with a trailing dot) as identical.
	//
	// If you're creating a public hosted zone, this is the name you have registered
	// with your DNS registrar. If your domain name is registered with a registrar
	// other than Amazon Route 53, change the name servers for your domain to the
	// set of NameServers that CreateHostedZone returns in DelegationSet.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// (Private hosted zones only) A complex type that contains information about
	// the Amazon VPC that you're associating with this hosted zone.
	//
	// You can specify only one Amazon VPC when you create a private hosted zone.
	// To associate additional Amazon VPCs with the hosted zone, use AssociateVPCWithHostedZone
	// after you create a hosted zone.
	VPC *VPC `type:"structure"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to create a hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateHostedZoneRequest

func (CreateHostedZoneInput) GoString

func (s CreateHostedZoneInput) GoString() string

GoString returns the string representation

func (*CreateHostedZoneInput) MarshalFields

func (s *CreateHostedZoneInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateHostedZoneInput) SetCallerReference

func (s *CreateHostedZoneInput) SetCallerReference(v string) *CreateHostedZoneInput

SetCallerReference sets the CallerReference field's value.

func (*CreateHostedZoneInput) SetDelegationSetId

func (s *CreateHostedZoneInput) SetDelegationSetId(v string) *CreateHostedZoneInput

SetDelegationSetId sets the DelegationSetId field's value.

func (*CreateHostedZoneInput) SetHostedZoneConfig

func (s *CreateHostedZoneInput) SetHostedZoneConfig(v *HostedZoneConfig) *CreateHostedZoneInput

SetHostedZoneConfig sets the HostedZoneConfig field's value.

func (*CreateHostedZoneInput) SetName

SetName sets the Name field's value.

func (*CreateHostedZoneInput) SetVPC

SetVPC sets the VPC field's value.

func (CreateHostedZoneInput) String

func (s CreateHostedZoneInput) String() string

String returns the string representation

func (*CreateHostedZoneInput) Validate

func (s *CreateHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateHostedZoneOutput

type CreateHostedZoneOutput struct {

	// A complex type that contains information about the CreateHostedZone request.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`

	// A complex type that describes the name servers for this hosted zone.
	//
	// DelegationSet is a required field
	DelegationSet *DelegationSet `type:"structure" required:"true"`

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZone is a required field
	HostedZone *HostedZone `type:"structure" required:"true"`

	// The unique URL representing the new hosted zone.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains information about an Amazon VPC that you associated
	// with this hosted zone.
	VPC *VPC `type:"structure"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateHostedZoneResponse

func (CreateHostedZoneOutput) GoString

func (s CreateHostedZoneOutput) GoString() string

GoString returns the string representation

func (*CreateHostedZoneOutput) MarshalFields

func (s *CreateHostedZoneOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateHostedZoneOutput) SetChangeInfo

SetChangeInfo sets the ChangeInfo field's value.

func (*CreateHostedZoneOutput) SetDelegationSet

SetDelegationSet sets the DelegationSet field's value.

func (*CreateHostedZoneOutput) SetHostedZone

SetHostedZone sets the HostedZone field's value.

func (*CreateHostedZoneOutput) SetLocation

SetLocation sets the Location field's value.

func (*CreateHostedZoneOutput) SetVPC

SetVPC sets the VPC field's value.

func (CreateHostedZoneOutput) String

func (s CreateHostedZoneOutput) String() string

String returns the string representation

type CreateQueryLoggingConfigInput

type CreateQueryLoggingConfigInput struct {

	// The Amazon Resource Name (ARN) for the log group that you want to Amazon
	// Route 53 to send query logs to. This is the format of the ARN:
	//
	// arn:aws:logs:region:account-id:log-group:log_group_name
	//
	// To get the ARN for a log group, you can use the CloudWatch console, the DescribeLogGroups
	// (http://docs.aws.amazon.com/AmazonCloudWatchLogs/latest/APIReference/API_DescribeLogGroups.html)
	// API action, the describe-log-groups (http://docs.aws.amazon.com/cli/latest/reference/logs/describe-log-groups.html)
	// command, or the applicable command in one of the AWS SDKs.
	//
	// CloudWatchLogsLogGroupArn is a required field
	CloudWatchLogsLogGroupArn *string `type:"string" required:"true"`

	// The ID of the hosted zone that you want to log queries for. You can log queries
	// only for public hosted zones.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateQueryLoggingConfigRequest

func (CreateQueryLoggingConfigInput) GoString

GoString returns the string representation

func (*CreateQueryLoggingConfigInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateQueryLoggingConfigInput) SetCloudWatchLogsLogGroupArn

func (s *CreateQueryLoggingConfigInput) SetCloudWatchLogsLogGroupArn(v string) *CreateQueryLoggingConfigInput

SetCloudWatchLogsLogGroupArn sets the CloudWatchLogsLogGroupArn field's value.

func (*CreateQueryLoggingConfigInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (CreateQueryLoggingConfigInput) String

String returns the string representation

func (*CreateQueryLoggingConfigInput) Validate

func (s *CreateQueryLoggingConfigInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateQueryLoggingConfigOutput

type CreateQueryLoggingConfigOutput struct {

	// The unique URL representing the new query logging configuration.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains the ID for a query logging configuration, the
	// ID of the hosted zone that you want to log queries for, and the ARN for the
	// log group that you want Amazon Route 53 to send query logs to.
	//
	// QueryLoggingConfig is a required field
	QueryLoggingConfig *QueryLoggingConfig `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateQueryLoggingConfigResponse

func (CreateQueryLoggingConfigOutput) GoString

GoString returns the string representation

func (*CreateQueryLoggingConfigOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateQueryLoggingConfigOutput) SetLocation

SetLocation sets the Location field's value.

func (*CreateQueryLoggingConfigOutput) SetQueryLoggingConfig

SetQueryLoggingConfig sets the QueryLoggingConfig field's value.

func (CreateQueryLoggingConfigOutput) String

String returns the string representation

type CreateReusableDelegationSetInput

type CreateReusableDelegationSetInput struct {

	// A unique string that identifies the request, and that allows you to retry
	// failed CreateReusableDelegationSet requests without the risk of executing
	// the operation twice. You must use a unique CallerReference string every time
	// you submit a CreateReusableDelegationSet request. CallerReference can be
	// any unique string, for example a date/time stamp.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// If you want to mark the delegation set for an existing hosted zone as reusable,
	// the ID for that hosted zone.
	HostedZoneId *string `type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateReusableDelegationSetRequest

func (CreateReusableDelegationSetInput) GoString

GoString returns the string representation

func (*CreateReusableDelegationSetInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateReusableDelegationSetInput) SetCallerReference

SetCallerReference sets the CallerReference field's value.

func (*CreateReusableDelegationSetInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (CreateReusableDelegationSetInput) String

String returns the string representation

func (*CreateReusableDelegationSetInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type CreateReusableDelegationSetOutput

type CreateReusableDelegationSetOutput struct {

	// A complex type that contains name server information.
	//
	// DelegationSet is a required field
	DelegationSet *DelegationSet `type:"structure" required:"true"`

	// The unique URL representing the new reusable delegation set.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateReusableDelegationSetResponse

func (CreateReusableDelegationSetOutput) GoString

GoString returns the string representation

func (*CreateReusableDelegationSetOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateReusableDelegationSetOutput) SetDelegationSet

SetDelegationSet sets the DelegationSet field's value.

func (*CreateReusableDelegationSetOutput) SetLocation

SetLocation sets the Location field's value.

func (CreateReusableDelegationSetOutput) String

String returns the string representation

type CreateTrafficPolicyInput

type CreateTrafficPolicyInput struct {

	// (Optional) Any comments that you want to include about the traffic policy.
	Comment *string `type:"string"`

	// The definition of this traffic policy in JSON format. For more information,
	// see Traffic Policy Document Format (http://docs.aws.amazon.com/Route53/latest/APIReference/api-policies-traffic-policy-document-format.html).
	//
	// Document is a required field
	Document *string `type:"string" required:"true"`

	// The name of the traffic policy.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy that you want to create. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyRequest

func (CreateTrafficPolicyInput) GoString

func (s CreateTrafficPolicyInput) GoString() string

GoString returns the string representation

func (*CreateTrafficPolicyInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateTrafficPolicyInput) SetComment

SetComment sets the Comment field's value.

func (*CreateTrafficPolicyInput) SetDocument

SetDocument sets the Document field's value.

func (*CreateTrafficPolicyInput) SetName

SetName sets the Name field's value.

func (CreateTrafficPolicyInput) String

func (s CreateTrafficPolicyInput) String() string

String returns the string representation

func (*CreateTrafficPolicyInput) Validate

func (s *CreateTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyInstanceInput

type CreateTrafficPolicyInstanceInput struct {

	// The ID of the hosted zone in which you want Amazon Route 53 to create resource
	// record sets by using the configuration in a traffic policy.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// The domain name (such as example.com) or subdomain name (such as www.example.com)
	// for which Amazon Route 53 responds to DNS queries by using the resource record
	// sets that Amazon Route 53 creates for this traffic policy instance.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// (Optional) The TTL that you want Amazon Route 53 to assign to all of the
	// resource record sets that it creates in the specified hosted zone.
	//
	// TTL is a required field
	TTL *int64 `type:"long" required:"true"`

	// The ID of the traffic policy that you want to use to create resource record
	// sets in the specified hosted zone.
	//
	// TrafficPolicyId is a required field
	TrafficPolicyId *string `min:"1" type:"string" required:"true"`

	// The version of the traffic policy that you want to use to create resource
	// record sets in the specified hosted zone.
	//
	// TrafficPolicyVersion is a required field
	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that you want to create based on a specified traffic policy. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyInstanceRequest

func (CreateTrafficPolicyInstanceInput) GoString

GoString returns the string representation

func (*CreateTrafficPolicyInstanceInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateTrafficPolicyInstanceInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*CreateTrafficPolicyInstanceInput) SetName

SetName sets the Name field's value.

func (*CreateTrafficPolicyInstanceInput) SetTTL

SetTTL sets the TTL field's value.

func (*CreateTrafficPolicyInstanceInput) SetTrafficPolicyId

SetTrafficPolicyId sets the TrafficPolicyId field's value.

func (*CreateTrafficPolicyInstanceInput) SetTrafficPolicyVersion

SetTrafficPolicyVersion sets the TrafficPolicyVersion field's value.

func (CreateTrafficPolicyInstanceInput) String

String returns the string representation

func (*CreateTrafficPolicyInstanceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyInstanceOutput

type CreateTrafficPolicyInstanceOutput struct {

	// A unique URL that represents a new traffic policy instance.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new traffic policy instance.
	//
	// TrafficPolicyInstance is a required field
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicyInstance request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyInstanceResponse

func (CreateTrafficPolicyInstanceOutput) GoString

GoString returns the string representation

func (*CreateTrafficPolicyInstanceOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateTrafficPolicyInstanceOutput) SetLocation

SetLocation sets the Location field's value.

func (*CreateTrafficPolicyInstanceOutput) SetTrafficPolicyInstance

SetTrafficPolicyInstance sets the TrafficPolicyInstance field's value.

func (CreateTrafficPolicyInstanceOutput) String

String returns the string representation

type CreateTrafficPolicyOutput

type CreateTrafficPolicyOutput struct {

	// A unique URL that represents a new traffic policy.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new traffic policy.
	//
	// TrafficPolicy is a required field
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicy request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyResponse

func (CreateTrafficPolicyOutput) GoString

func (s CreateTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (*CreateTrafficPolicyOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateTrafficPolicyOutput) SetLocation

SetLocation sets the Location field's value.

func (*CreateTrafficPolicyOutput) SetTrafficPolicy

SetTrafficPolicy sets the TrafficPolicy field's value.

func (CreateTrafficPolicyOutput) String

func (s CreateTrafficPolicyOutput) String() string

String returns the string representation

type CreateTrafficPolicyVersionInput

type CreateTrafficPolicyVersionInput struct {

	// The comment that you specified in the CreateTrafficPolicyVersion request,
	// if any.
	Comment *string `type:"string"`

	// The definition of this version of the traffic policy, in JSON format. You
	// specified the JSON in the CreateTrafficPolicyVersion request. For more information
	// about the JSON format, see CreateTrafficPolicy.
	//
	// Document is a required field
	Document *string `type:"string" required:"true"`

	// The ID of the traffic policy for which you want to create a new version.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy that you want to create a new version for. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyVersionRequest

func (CreateTrafficPolicyVersionInput) GoString

GoString returns the string representation

func (*CreateTrafficPolicyVersionInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateTrafficPolicyVersionInput) SetComment

SetComment sets the Comment field's value.

func (*CreateTrafficPolicyVersionInput) SetDocument

SetDocument sets the Document field's value.

func (*CreateTrafficPolicyVersionInput) SetId

SetId sets the Id field's value.

func (CreateTrafficPolicyVersionInput) String

String returns the string representation

func (*CreateTrafficPolicyVersionInput) Validate

func (s *CreateTrafficPolicyVersionInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateTrafficPolicyVersionOutput

type CreateTrafficPolicyVersionOutput struct {

	// A unique URL that represents a new traffic policy version.
	//
	// Location is a required field
	Location *string `location:"header" locationName:"Location" type:"string" required:"true"`

	// A complex type that contains settings for the new version of the traffic
	// policy.
	//
	// TrafficPolicy is a required field
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the CreateTrafficPolicyVersion request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyVersionResponse

func (CreateTrafficPolicyVersionOutput) GoString

GoString returns the string representation

func (*CreateTrafficPolicyVersionOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateTrafficPolicyVersionOutput) SetLocation

SetLocation sets the Location field's value.

func (*CreateTrafficPolicyVersionOutput) SetTrafficPolicy

SetTrafficPolicy sets the TrafficPolicy field's value.

func (CreateTrafficPolicyVersionOutput) String

String returns the string representation

type CreateVPCAssociationAuthorizationInput

type CreateVPCAssociationAuthorizationInput struct {

	// The ID of the private hosted zone that you want to authorize associating
	// a VPC with.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// A complex type that contains the VPC ID and region for the VPC that you want
	// to authorize associating with your hosted zone.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to authorize associating a VPC with your private hosted zone. Authorization is only required when a private hosted zone and a VPC were created by using different accounts. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateVPCAssociationAuthorizationRequest

func (CreateVPCAssociationAuthorizationInput) GoString

GoString returns the string representation

func (*CreateVPCAssociationAuthorizationInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateVPCAssociationAuthorizationInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*CreateVPCAssociationAuthorizationInput) SetVPC

SetVPC sets the VPC field's value.

func (CreateVPCAssociationAuthorizationInput) String

String returns the string representation

func (*CreateVPCAssociationAuthorizationInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type CreateVPCAssociationAuthorizationOutput

type CreateVPCAssociationAuthorizationOutput struct {

	// The ID of the hosted zone that you authorized associating a VPC with.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// The VPC that you authorized associating with a hosted zone.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information from a CreateVPCAssociationAuthorization request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateVPCAssociationAuthorizationResponse

func (CreateVPCAssociationAuthorizationOutput) GoString

GoString returns the string representation

func (*CreateVPCAssociationAuthorizationOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*CreateVPCAssociationAuthorizationOutput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*CreateVPCAssociationAuthorizationOutput) SetVPC

SetVPC sets the VPC field's value.

func (CreateVPCAssociationAuthorizationOutput) String

String returns the string representation

type DelegationSet

type DelegationSet struct {

	// The value that you specified for CallerReference when you created the reusable
	// delegation set.
	CallerReference *string `min:"1" type:"string"`

	// The ID that Amazon Route 53 assigns to a reusable delegation set.
	Id *string `type:"string"`

	// A complex type that contains a list of the authoritative name servers for
	// a hosted zone or for a reusable delegation set.
	//
	// NameServers is a required field
	NameServers []*string `locationNameList:"NameServer" min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that lists the name servers in a delegation set, as well as the CallerReference and the ID for the delegation set. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DelegationSet

func (DelegationSet) GoString

func (s DelegationSet) GoString() string

GoString returns the string representation

func (*DelegationSet) MarshalFields

func (s *DelegationSet) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DelegationSet) SetCallerReference

func (s *DelegationSet) SetCallerReference(v string) *DelegationSet

SetCallerReference sets the CallerReference field's value.

func (*DelegationSet) SetId

func (s *DelegationSet) SetId(v string) *DelegationSet

SetId sets the Id field's value.

func (*DelegationSet) SetNameServers

func (s *DelegationSet) SetNameServers(v []*string) *DelegationSet

SetNameServers sets the NameServers field's value.

func (DelegationSet) String

func (s DelegationSet) String() string

String returns the string representation

type DeleteHealthCheckInput

type DeleteHealthCheckInput struct {

	// The ID of the health check that you want to delete.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

This action deletes a health check. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteHealthCheckRequest

func (DeleteHealthCheckInput) GoString

func (s DeleteHealthCheckInput) GoString() string

GoString returns the string representation

func (*DeleteHealthCheckInput) MarshalFields

func (s *DeleteHealthCheckInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DeleteHealthCheckInput) SetHealthCheckId

func (s *DeleteHealthCheckInput) SetHealthCheckId(v string) *DeleteHealthCheckInput

SetHealthCheckId sets the HealthCheckId field's value.

func (DeleteHealthCheckInput) String

func (s DeleteHealthCheckInput) String() string

String returns the string representation

func (*DeleteHealthCheckInput) Validate

func (s *DeleteHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteHealthCheckOutput

type DeleteHealthCheckOutput struct {
	// contains filtered or unexported fields
}

An empty element. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteHealthCheckResponse

func (DeleteHealthCheckOutput) GoString

func (s DeleteHealthCheckOutput) GoString() string

GoString returns the string representation

func (*DeleteHealthCheckOutput) MarshalFields

func (s *DeleteHealthCheckOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteHealthCheckOutput) String

func (s DeleteHealthCheckOutput) String() string

String returns the string representation

type DeleteHostedZoneInput

type DeleteHostedZoneInput struct {

	// The ID of the hosted zone you want to delete.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request to delete a hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteHostedZoneRequest

func (DeleteHostedZoneInput) GoString

func (s DeleteHostedZoneInput) GoString() string

GoString returns the string representation

func (*DeleteHostedZoneInput) MarshalFields

func (s *DeleteHostedZoneInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DeleteHostedZoneInput) SetId

SetId sets the Id field's value.

func (DeleteHostedZoneInput) String

func (s DeleteHostedZoneInput) String() string

String returns the string representation

func (*DeleteHostedZoneInput) Validate

func (s *DeleteHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteHostedZoneOutput

type DeleteHostedZoneOutput struct {

	// A complex type that contains the ID, the status, and the date and time of
	// a request to delete a hosted zone.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a DeleteHostedZone request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteHostedZoneResponse

func (DeleteHostedZoneOutput) GoString

func (s DeleteHostedZoneOutput) GoString() string

GoString returns the string representation

func (*DeleteHostedZoneOutput) MarshalFields

func (s *DeleteHostedZoneOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DeleteHostedZoneOutput) SetChangeInfo

SetChangeInfo sets the ChangeInfo field's value.

func (DeleteHostedZoneOutput) String

func (s DeleteHostedZoneOutput) String() string

String returns the string representation

type DeleteQueryLoggingConfigInput

type DeleteQueryLoggingConfigInput struct {

	// The ID of the configuration that you want to delete.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteQueryLoggingConfigRequest

func (DeleteQueryLoggingConfigInput) GoString

GoString returns the string representation

func (*DeleteQueryLoggingConfigInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DeleteQueryLoggingConfigInput) SetId

SetId sets the Id field's value.

func (DeleteQueryLoggingConfigInput) String

String returns the string representation

func (*DeleteQueryLoggingConfigInput) Validate

func (s *DeleteQueryLoggingConfigInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteQueryLoggingConfigOutput

type DeleteQueryLoggingConfigOutput struct {
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteQueryLoggingConfigResponse

func (DeleteQueryLoggingConfigOutput) GoString

GoString returns the string representation

func (*DeleteQueryLoggingConfigOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteQueryLoggingConfigOutput) String

String returns the string representation

type DeleteReusableDelegationSetInput

type DeleteReusableDelegationSetInput struct {

	// The ID of the reusable delegation set that you want to delete.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request to delete a reusable delegation set. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteReusableDelegationSetRequest

func (DeleteReusableDelegationSetInput) GoString

GoString returns the string representation

func (*DeleteReusableDelegationSetInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DeleteReusableDelegationSetInput) SetId

SetId sets the Id field's value.

func (DeleteReusableDelegationSetInput) String

String returns the string representation

func (*DeleteReusableDelegationSetInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type DeleteReusableDelegationSetOutput

type DeleteReusableDelegationSetOutput struct {
	// contains filtered or unexported fields
}

An empty element. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteReusableDelegationSetResponse

func (DeleteReusableDelegationSetOutput) GoString

GoString returns the string representation

func (*DeleteReusableDelegationSetOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteReusableDelegationSetOutput) String

String returns the string representation

type DeleteTrafficPolicyInput

type DeleteTrafficPolicyInput struct {

	// The ID of the traffic policy that you want to delete.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`

	// The version number of the traffic policy that you want to delete.
	//
	// Version is a required field
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A request to delete a specified traffic policy version. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteTrafficPolicyRequest

func (DeleteTrafficPolicyInput) GoString

func (s DeleteTrafficPolicyInput) GoString() string

GoString returns the string representation

func (*DeleteTrafficPolicyInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DeleteTrafficPolicyInput) SetId

SetId sets the Id field's value.

func (*DeleteTrafficPolicyInput) SetVersion

SetVersion sets the Version field's value.

func (DeleteTrafficPolicyInput) String

func (s DeleteTrafficPolicyInput) String() string

String returns the string representation

func (*DeleteTrafficPolicyInput) Validate

func (s *DeleteTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteTrafficPolicyInstanceInput

type DeleteTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to delete.
	//
	// When you delete a traffic policy instance, Amazon Route 53 also deletes all
	// of the resource record sets that were created when you created the traffic
	// policy instance.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request to delete a specified traffic policy instance. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteTrafficPolicyInstanceRequest

func (DeleteTrafficPolicyInstanceInput) GoString

GoString returns the string representation

func (*DeleteTrafficPolicyInstanceInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DeleteTrafficPolicyInstanceInput) SetId

SetId sets the Id field's value.

func (DeleteTrafficPolicyInstanceInput) String

String returns the string representation

func (*DeleteTrafficPolicyInstanceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type DeleteTrafficPolicyInstanceOutput

type DeleteTrafficPolicyInstanceOutput struct {
	// contains filtered or unexported fields
}

An empty element. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteTrafficPolicyInstanceResponse

func (DeleteTrafficPolicyInstanceOutput) GoString

GoString returns the string representation

func (*DeleteTrafficPolicyInstanceOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteTrafficPolicyInstanceOutput) String

String returns the string representation

type DeleteTrafficPolicyOutput

type DeleteTrafficPolicyOutput struct {
	// contains filtered or unexported fields
}

An empty element. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteTrafficPolicyResponse

func (DeleteTrafficPolicyOutput) GoString

func (s DeleteTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (*DeleteTrafficPolicyOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteTrafficPolicyOutput) String

func (s DeleteTrafficPolicyOutput) String() string

String returns the string representation

type DeleteVPCAssociationAuthorizationInput

type DeleteVPCAssociationAuthorizationInput struct {

	// When removing authorization to associate a VPC that was created by one AWS
	// account with a hosted zone that was created with a different AWS account,
	// the ID of the hosted zone.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// When removing authorization to associate a VPC that was created by one AWS
	// account with a hosted zone that was created with a different AWS account,
	// a complex type that includes the ID and region of the VPC.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the request to remove authorization to associate a VPC that was created by one AWS account with a hosted zone that was created with a different AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteVPCAssociationAuthorizationRequest

func (DeleteVPCAssociationAuthorizationInput) GoString

GoString returns the string representation

func (*DeleteVPCAssociationAuthorizationInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DeleteVPCAssociationAuthorizationInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*DeleteVPCAssociationAuthorizationInput) SetVPC

SetVPC sets the VPC field's value.

func (DeleteVPCAssociationAuthorizationInput) String

String returns the string representation

func (*DeleteVPCAssociationAuthorizationInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type DeleteVPCAssociationAuthorizationOutput

type DeleteVPCAssociationAuthorizationOutput struct {
	// contains filtered or unexported fields
}

Empty response for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteVPCAssociationAuthorizationResponse

func (DeleteVPCAssociationAuthorizationOutput) GoString

GoString returns the string representation

func (*DeleteVPCAssociationAuthorizationOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (DeleteVPCAssociationAuthorizationOutput) String

String returns the string representation

type Dimension

type Dimension struct {

	// For the metric that the CloudWatch alarm is associated with, the name of
	// one dimension.
	//
	// Name is a required field
	Name *string `min:"1" type:"string" required:"true"`

	// For the metric that the CloudWatch alarm is associated with, the value of
	// one dimension.
	//
	// Value is a required field
	Value *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

For the metric that the CloudWatch alarm is associated with, a complex type that contains information about one dimension. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/Dimension

func (Dimension) GoString

func (s Dimension) GoString() string

GoString returns the string representation

func (*Dimension) MarshalFields

func (s *Dimension) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*Dimension) SetName

func (s *Dimension) SetName(v string) *Dimension

SetName sets the Name field's value.

func (*Dimension) SetValue

func (s *Dimension) SetValue(v string) *Dimension

SetValue sets the Value field's value.

func (Dimension) String

func (s Dimension) String() string

String returns the string representation

type DisassociateVPCFromHostedZoneInput

type DisassociateVPCFromHostedZoneInput struct {

	// Optional: A comment about the disassociation request.
	Comment *string `type:"string"`

	// The ID of the private hosted zone that you want to disassociate a VPC from.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// A complex type that contains information about the VPC that you're disassociating
	// from the specified hosted zone.
	//
	// VPC is a required field
	VPC *VPC `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the VPC that you want to disassociate from a specified private hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DisassociateVPCFromHostedZoneRequest

func (DisassociateVPCFromHostedZoneInput) GoString

GoString returns the string representation

func (*DisassociateVPCFromHostedZoneInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DisassociateVPCFromHostedZoneInput) SetComment

SetComment sets the Comment field's value.

func (*DisassociateVPCFromHostedZoneInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*DisassociateVPCFromHostedZoneInput) SetVPC

SetVPC sets the VPC field's value.

func (DisassociateVPCFromHostedZoneInput) String

String returns the string representation

func (*DisassociateVPCFromHostedZoneInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type DisassociateVPCFromHostedZoneOutput

type DisassociateVPCFromHostedZoneOutput struct {

	// A complex type that describes the changes made to the specified private hosted
	// zone.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the disassociate request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DisassociateVPCFromHostedZoneResponse

func (DisassociateVPCFromHostedZoneOutput) GoString

GoString returns the string representation

func (*DisassociateVPCFromHostedZoneOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*DisassociateVPCFromHostedZoneOutput) SetChangeInfo

SetChangeInfo sets the ChangeInfo field's value.

func (DisassociateVPCFromHostedZoneOutput) String

String returns the string representation

type GeoLocation

type GeoLocation struct {

	// The two-letter code for the continent.
	//
	// Valid values: AF | AN | AS | EU | OC | NA | SA
	//
	// Constraint: Specifying ContinentCode with either CountryCode or SubdivisionCode
	// returns an InvalidInput error.
	ContinentCode *string `min:"2" type:"string"`

	// The two-letter code for the country.
	CountryCode *string `min:"1" type:"string"`

	// The code for the subdivision, for example, a state in the United States or
	// a province in Canada.
	SubdivisionCode *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about a geo location. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GeoLocation

func (GeoLocation) GoString

func (s GeoLocation) GoString() string

GoString returns the string representation

func (*GeoLocation) MarshalFields

func (s *GeoLocation) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GeoLocation) SetContinentCode

func (s *GeoLocation) SetContinentCode(v string) *GeoLocation

SetContinentCode sets the ContinentCode field's value.

func (*GeoLocation) SetCountryCode

func (s *GeoLocation) SetCountryCode(v string) *GeoLocation

SetCountryCode sets the CountryCode field's value.

func (*GeoLocation) SetSubdivisionCode

func (s *GeoLocation) SetSubdivisionCode(v string) *GeoLocation

SetSubdivisionCode sets the SubdivisionCode field's value.

func (GeoLocation) String

func (s GeoLocation) String() string

String returns the string representation

func (*GeoLocation) Validate

func (s *GeoLocation) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GeoLocationDetails

type GeoLocationDetails struct {

	// The two-letter code for the continent.
	ContinentCode *string `min:"2" type:"string"`

	// The full name of the continent.
	ContinentName *string `min:"1" type:"string"`

	// The two-letter code for the country.
	CountryCode *string `min:"1" type:"string"`

	// The name of the country.
	CountryName *string `min:"1" type:"string"`

	// The code for the subdivision, for example, a state in the United States or
	// a province in Canada.
	SubdivisionCode *string `min:"1" type:"string"`

	// The full name of the subdivision, for example, a state in the United States
	// or a province in Canada.
	SubdivisionName *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the codes and full continent, country, and subdivision names for the specified geolocation code. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GeoLocationDetails

func (GeoLocationDetails) GoString

func (s GeoLocationDetails) GoString() string

GoString returns the string representation

func (*GeoLocationDetails) MarshalFields

func (s *GeoLocationDetails) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GeoLocationDetails) SetContinentCode

func (s *GeoLocationDetails) SetContinentCode(v string) *GeoLocationDetails

SetContinentCode sets the ContinentCode field's value.

func (*GeoLocationDetails) SetContinentName

func (s *GeoLocationDetails) SetContinentName(v string) *GeoLocationDetails

SetContinentName sets the ContinentName field's value.

func (*GeoLocationDetails) SetCountryCode

func (s *GeoLocationDetails) SetCountryCode(v string) *GeoLocationDetails

SetCountryCode sets the CountryCode field's value.

func (*GeoLocationDetails) SetCountryName

func (s *GeoLocationDetails) SetCountryName(v string) *GeoLocationDetails

SetCountryName sets the CountryName field's value.

func (*GeoLocationDetails) SetSubdivisionCode

func (s *GeoLocationDetails) SetSubdivisionCode(v string) *GeoLocationDetails

SetSubdivisionCode sets the SubdivisionCode field's value.

func (*GeoLocationDetails) SetSubdivisionName

func (s *GeoLocationDetails) SetSubdivisionName(v string) *GeoLocationDetails

SetSubdivisionName sets the SubdivisionName field's value.

func (GeoLocationDetails) String

func (s GeoLocationDetails) String() string

String returns the string representation

type GetChangeInput

type GetChangeInput struct {

	// The ID of the change batch request. The value that you specify here is the
	// value that ChangeResourceRecordSets returned in the Id element when you submitted
	// the request.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

The input for a GetChange request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetChangeRequest

func (GetChangeInput) GoString

func (s GetChangeInput) GoString() string

GoString returns the string representation

func (*GetChangeInput) MarshalFields

func (s *GetChangeInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetChangeInput) SetId

func (s *GetChangeInput) SetId(v string) *GetChangeInput

SetId sets the Id field's value.

func (GetChangeInput) String

func (s GetChangeInput) String() string

String returns the string representation

func (*GetChangeInput) Validate

func (s *GetChangeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetChangeOutput

type GetChangeOutput struct {

	// A complex type that contains information about the specified change batch.
	//
	// ChangeInfo is a required field
	ChangeInfo *ChangeInfo `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the ChangeInfo element. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetChangeResponse

func (GetChangeOutput) GoString

func (s GetChangeOutput) GoString() string

GoString returns the string representation

func (*GetChangeOutput) MarshalFields

func (s *GetChangeOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetChangeOutput) SetChangeInfo

func (s *GetChangeOutput) SetChangeInfo(v *ChangeInfo) *GetChangeOutput

SetChangeInfo sets the ChangeInfo field's value.

func (GetChangeOutput) String

func (s GetChangeOutput) String() string

String returns the string representation

type GetCheckerIpRangesInput

type GetCheckerIpRangesInput struct {
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetCheckerIpRangesRequest

func (GetCheckerIpRangesInput) GoString

func (s GetCheckerIpRangesInput) GoString() string

GoString returns the string representation

func (*GetCheckerIpRangesInput) MarshalFields

func (s *GetCheckerIpRangesInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetCheckerIpRangesInput) String

func (s GetCheckerIpRangesInput) String() string

String returns the string representation

type GetCheckerIpRangesOutput

type GetCheckerIpRangesOutput struct {

	// CheckerIpRanges is a required field
	CheckerIpRanges []*string `type:"list" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetCheckerIpRangesResponse

func (GetCheckerIpRangesOutput) GoString

func (s GetCheckerIpRangesOutput) GoString() string

GoString returns the string representation

func (*GetCheckerIpRangesOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetCheckerIpRangesOutput) SetCheckerIpRanges

func (s *GetCheckerIpRangesOutput) SetCheckerIpRanges(v []*string) *GetCheckerIpRangesOutput

SetCheckerIpRanges sets the CheckerIpRanges field's value.

func (GetCheckerIpRangesOutput) String

func (s GetCheckerIpRangesOutput) String() string

String returns the string representation

type GetGeoLocationInput

type GetGeoLocationInput struct {

	// Amazon Route 53 supports the following continent codes:
	//
	//    * AF: Africa
	//
	//    * AN: Antarctica
	//
	//    * AS: Asia
	//
	//    * EU: Europe
	//
	//    * OC: Oceania
	//
	//    * NA: North America
	//
	//    * SA: South America
	ContinentCode *string `location:"querystring" locationName:"continentcode" min:"2" type:"string"`

	// Amazon Route 53 uses the two-letter country codes that are specified in ISO
	// standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	CountryCode *string `location:"querystring" locationName:"countrycode" min:"1" type:"string"`

	// Amazon Route 53 uses the one- to three-letter subdivision codes that are
	// specified in ISO standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	// Amazon Route 53 doesn't support subdivision codes for all countries. If you
	// specify SubdivisionCode, you must also specify CountryCode.
	SubdivisionCode *string `location:"querystring" locationName:"subdivisioncode" min:"1" type:"string"`
	// contains filtered or unexported fields
}

A request for information about whether a specified geographic location is supported for Amazon Route 53 geolocation resource record sets. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetGeoLocationRequest

func (GetGeoLocationInput) GoString

func (s GetGeoLocationInput) GoString() string

GoString returns the string representation

func (*GetGeoLocationInput) MarshalFields

func (s *GetGeoLocationInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetGeoLocationInput) SetContinentCode

func (s *GetGeoLocationInput) SetContinentCode(v string) *GetGeoLocationInput

SetContinentCode sets the ContinentCode field's value.

func (*GetGeoLocationInput) SetCountryCode

func (s *GetGeoLocationInput) SetCountryCode(v string) *GetGeoLocationInput

SetCountryCode sets the CountryCode field's value.

func (*GetGeoLocationInput) SetSubdivisionCode

func (s *GetGeoLocationInput) SetSubdivisionCode(v string) *GetGeoLocationInput

SetSubdivisionCode sets the SubdivisionCode field's value.

func (GetGeoLocationInput) String

func (s GetGeoLocationInput) String() string

String returns the string representation

func (*GetGeoLocationInput) Validate

func (s *GetGeoLocationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetGeoLocationOutput

type GetGeoLocationOutput struct {

	// A complex type that contains the codes and full continent, country, and subdivision
	// names for the specified geolocation code.
	//
	// GeoLocationDetails is a required field
	GeoLocationDetails *GeoLocationDetails `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the specified geolocation code. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetGeoLocationResponse

func (GetGeoLocationOutput) GoString

func (s GetGeoLocationOutput) GoString() string

GoString returns the string representation

func (*GetGeoLocationOutput) MarshalFields

func (s *GetGeoLocationOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetGeoLocationOutput) SetGeoLocationDetails

func (s *GetGeoLocationOutput) SetGeoLocationDetails(v *GeoLocationDetails) *GetGeoLocationOutput

SetGeoLocationDetails sets the GeoLocationDetails field's value.

func (GetGeoLocationOutput) String

func (s GetGeoLocationOutput) String() string

String returns the string representation

type GetHealthCheckCountInput

type GetHealthCheckCountInput struct {
	// contains filtered or unexported fields
}

A request for the number of health checks that are associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckCountRequest

func (GetHealthCheckCountInput) GoString

func (s GetHealthCheckCountInput) GoString() string

GoString returns the string representation

func (*GetHealthCheckCountInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetHealthCheckCountInput) String

func (s GetHealthCheckCountInput) String() string

String returns the string representation

type GetHealthCheckCountOutput

type GetHealthCheckCountOutput struct {

	// The number of health checks associated with the current AWS account.
	//
	// HealthCheckCount is a required field
	HealthCheckCount *int64 `type:"long" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheckCount request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckCountResponse

func (GetHealthCheckCountOutput) GoString

func (s GetHealthCheckCountOutput) GoString() string

GoString returns the string representation

func (*GetHealthCheckCountOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHealthCheckCountOutput) SetHealthCheckCount

func (s *GetHealthCheckCountOutput) SetHealthCheckCount(v int64) *GetHealthCheckCountOutput

SetHealthCheckCount sets the HealthCheckCount field's value.

func (GetHealthCheckCountOutput) String

func (s GetHealthCheckCountOutput) String() string

String returns the string representation

type GetHealthCheckInput

type GetHealthCheckInput struct {

	// The identifier that Amazon Route 53 assigned to the health check when you
	// created it. When you add or update a resource record set, you use this value
	// to specify which health check to use. The value can be up to 64 characters
	// long.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request to get information about a specified health check. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckRequest

func (GetHealthCheckInput) GoString

func (s GetHealthCheckInput) GoString() string

GoString returns the string representation

func (*GetHealthCheckInput) MarshalFields

func (s *GetHealthCheckInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHealthCheckInput) SetHealthCheckId

func (s *GetHealthCheckInput) SetHealthCheckId(v string) *GetHealthCheckInput

SetHealthCheckId sets the HealthCheckId field's value.

func (GetHealthCheckInput) String

func (s GetHealthCheckInput) String() string

String returns the string representation

func (*GetHealthCheckInput) Validate

func (s *GetHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckLastFailureReasonInput

type GetHealthCheckLastFailureReasonInput struct {

	// The ID for the health check for which you want the last failure reason. When
	// you created the health check, CreateHealthCheck returned the ID in the response,
	// in the HealthCheckId element.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request for the reason that a health check failed most recently. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckLastFailureReasonRequest

func (GetHealthCheckLastFailureReasonInput) GoString

GoString returns the string representation

func (*GetHealthCheckLastFailureReasonInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHealthCheckLastFailureReasonInput) SetHealthCheckId

SetHealthCheckId sets the HealthCheckId field's value.

func (GetHealthCheckLastFailureReasonInput) String

String returns the string representation

func (*GetHealthCheckLastFailureReasonInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckLastFailureReasonOutput

type GetHealthCheckLastFailureReasonOutput struct {

	// A list that contains one Observation element for each Amazon Route 53 health
	// checker that is reporting a last failure reason.
	//
	// HealthCheckObservations is a required field
	HealthCheckObservations []*HealthCheckObservation `locationNameList:"HealthCheckObservation" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheckLastFailureReason request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckLastFailureReasonResponse

func (GetHealthCheckLastFailureReasonOutput) GoString

GoString returns the string representation

func (*GetHealthCheckLastFailureReasonOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHealthCheckLastFailureReasonOutput) SetHealthCheckObservations

SetHealthCheckObservations sets the HealthCheckObservations field's value.

func (GetHealthCheckLastFailureReasonOutput) String

String returns the string representation

type GetHealthCheckOutput

type GetHealthCheckOutput struct {

	// A complex type that contains information about one health check that is associated
	// with the current AWS account.
	//
	// HealthCheck is a required field
	HealthCheck *HealthCheck `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheck request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckResponse

func (GetHealthCheckOutput) GoString

func (s GetHealthCheckOutput) GoString() string

GoString returns the string representation

func (*GetHealthCheckOutput) MarshalFields

func (s *GetHealthCheckOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHealthCheckOutput) SetHealthCheck

func (s *GetHealthCheckOutput) SetHealthCheck(v *HealthCheck) *GetHealthCheckOutput

SetHealthCheck sets the HealthCheck field's value.

func (GetHealthCheckOutput) String

func (s GetHealthCheckOutput) String() string

String returns the string representation

type GetHealthCheckStatusInput

type GetHealthCheckStatusInput struct {

	// The ID for the health check that you want the current status for. When you
	// created the health check, CreateHealthCheck returned the ID in the response,
	// in the HealthCheckId element.
	//
	// If you want to check the status of a calculated health check, you must use
	// the Amazon Route 53 console or the CloudWatch console. You can't use GetHealthCheckStatus
	// to get the status of a calculated health check.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request to get the status for a health check. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckStatusRequest

func (GetHealthCheckStatusInput) GoString

func (s GetHealthCheckStatusInput) GoString() string

GoString returns the string representation

func (*GetHealthCheckStatusInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHealthCheckStatusInput) SetHealthCheckId

SetHealthCheckId sets the HealthCheckId field's value.

func (GetHealthCheckStatusInput) String

func (s GetHealthCheckStatusInput) String() string

String returns the string representation

func (*GetHealthCheckStatusInput) Validate

func (s *GetHealthCheckStatusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHealthCheckStatusOutput

type GetHealthCheckStatusOutput struct {

	// A list that contains one HealthCheckObservation element for each Amazon Route
	// 53 health checker that is reporting a status about the health check endpoint.
	//
	// HealthCheckObservations is a required field
	HealthCheckObservations []*HealthCheckObservation `locationNameList:"HealthCheckObservation" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHealthCheck request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckStatusResponse

func (GetHealthCheckStatusOutput) GoString

func (s GetHealthCheckStatusOutput) GoString() string

GoString returns the string representation

func (*GetHealthCheckStatusOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHealthCheckStatusOutput) SetHealthCheckObservations

SetHealthCheckObservations sets the HealthCheckObservations field's value.

func (GetHealthCheckStatusOutput) String

String returns the string representation

type GetHostedZoneCountInput

type GetHostedZoneCountInput struct {
	// contains filtered or unexported fields
}

A request to retrieve a count of all the hosted zones that are associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHostedZoneCountRequest

func (GetHostedZoneCountInput) GoString

func (s GetHostedZoneCountInput) GoString() string

GoString returns the string representation

func (*GetHostedZoneCountInput) MarshalFields

func (s *GetHostedZoneCountInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetHostedZoneCountInput) String

func (s GetHostedZoneCountInput) String() string

String returns the string representation

type GetHostedZoneCountOutput

type GetHostedZoneCountOutput struct {

	// The total number of public and private hosted zones that are associated with
	// the current AWS account.
	//
	// HostedZoneCount is a required field
	HostedZoneCount *int64 `type:"long" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a GetHostedZoneCount request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHostedZoneCountResponse

func (GetHostedZoneCountOutput) GoString

func (s GetHostedZoneCountOutput) GoString() string

GoString returns the string representation

func (*GetHostedZoneCountOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHostedZoneCountOutput) SetHostedZoneCount

func (s *GetHostedZoneCountOutput) SetHostedZoneCount(v int64) *GetHostedZoneCountOutput

SetHostedZoneCount sets the HostedZoneCount field's value.

func (GetHostedZoneCountOutput) String

func (s GetHostedZoneCountOutput) String() string

String returns the string representation

type GetHostedZoneInput

type GetHostedZoneInput struct {

	// The ID of the hosted zone that you want to get information about.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request to get information about a specified hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHostedZoneRequest

func (GetHostedZoneInput) GoString

func (s GetHostedZoneInput) GoString() string

GoString returns the string representation

func (*GetHostedZoneInput) MarshalFields

func (s *GetHostedZoneInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHostedZoneInput) SetId

SetId sets the Id field's value.

func (GetHostedZoneInput) String

func (s GetHostedZoneInput) String() string

String returns the string representation

func (*GetHostedZoneInput) Validate

func (s *GetHostedZoneInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetHostedZoneOutput

type GetHostedZoneOutput struct {

	// A complex type that lists the Amazon Route 53 name servers for the specified
	// hosted zone.
	DelegationSet *DelegationSet `type:"structure"`

	// A complex type that contains general information about the specified hosted
	// zone.
	//
	// HostedZone is a required field
	HostedZone *HostedZone `type:"structure" required:"true"`

	// A complex type that contains information about the VPCs that are associated
	// with the specified hosted zone.
	VPCs []*VPC `locationNameList:"VPC" min:"1" type:"list"`
	// contains filtered or unexported fields
}

A complex type that contain the response to a GetHostedZone request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHostedZoneResponse

func (GetHostedZoneOutput) GoString

func (s GetHostedZoneOutput) GoString() string

GoString returns the string representation

func (*GetHostedZoneOutput) MarshalFields

func (s *GetHostedZoneOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetHostedZoneOutput) SetDelegationSet

func (s *GetHostedZoneOutput) SetDelegationSet(v *DelegationSet) *GetHostedZoneOutput

SetDelegationSet sets the DelegationSet field's value.

func (*GetHostedZoneOutput) SetHostedZone

func (s *GetHostedZoneOutput) SetHostedZone(v *HostedZone) *GetHostedZoneOutput

SetHostedZone sets the HostedZone field's value.

func (*GetHostedZoneOutput) SetVPCs

func (s *GetHostedZoneOutput) SetVPCs(v []*VPC) *GetHostedZoneOutput

SetVPCs sets the VPCs field's value.

func (GetHostedZoneOutput) String

func (s GetHostedZoneOutput) String() string

String returns the string representation

type GetQueryLoggingConfigInput

type GetQueryLoggingConfigInput struct {

	// The ID of the configuration for DNS query logging that you want to get information
	// about.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetQueryLoggingConfigRequest

func (GetQueryLoggingConfigInput) GoString

func (s GetQueryLoggingConfigInput) GoString() string

GoString returns the string representation

func (*GetQueryLoggingConfigInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetQueryLoggingConfigInput) SetId

SetId sets the Id field's value.

func (GetQueryLoggingConfigInput) String

String returns the string representation

func (*GetQueryLoggingConfigInput) Validate

func (s *GetQueryLoggingConfigInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetQueryLoggingConfigOutput

type GetQueryLoggingConfigOutput struct {

	// A complex type that contains information about the query logging configuration
	// that you specified in a GetQueryLoggingConfig request.
	//
	// QueryLoggingConfig is a required field
	QueryLoggingConfig *QueryLoggingConfig `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetQueryLoggingConfigResponse

func (GetQueryLoggingConfigOutput) GoString

func (s GetQueryLoggingConfigOutput) GoString() string

GoString returns the string representation

func (*GetQueryLoggingConfigOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetQueryLoggingConfigOutput) SetQueryLoggingConfig

SetQueryLoggingConfig sets the QueryLoggingConfig field's value.

func (GetQueryLoggingConfigOutput) String

String returns the string representation

type GetReusableDelegationSetInput

type GetReusableDelegationSetInput struct {

	// The ID of the reusable delegation set that you want to get a list of name
	// servers for.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request to get information about a specified reusable delegation set. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetReusableDelegationSetRequest

func (GetReusableDelegationSetInput) GoString

GoString returns the string representation

func (*GetReusableDelegationSetInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetReusableDelegationSetInput) SetId

SetId sets the Id field's value.

func (GetReusableDelegationSetInput) String

String returns the string representation

func (*GetReusableDelegationSetInput) Validate

func (s *GetReusableDelegationSetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetReusableDelegationSetOutput

type GetReusableDelegationSetOutput struct {

	// A complex type that contains information about the reusable delegation set.
	//
	// DelegationSet is a required field
	DelegationSet *DelegationSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to the GetReusableDelegationSet request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetReusableDelegationSetResponse

func (GetReusableDelegationSetOutput) GoString

GoString returns the string representation

func (*GetReusableDelegationSetOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetReusableDelegationSetOutput) SetDelegationSet

SetDelegationSet sets the DelegationSet field's value.

func (GetReusableDelegationSetOutput) String

String returns the string representation

type GetTrafficPolicyInput

type GetTrafficPolicyInput struct {

	// The ID of the traffic policy that you want to get information about.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`

	// The version number of the traffic policy that you want to get information
	// about.
	//
	// Version is a required field
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

Gets information about a specific traffic policy version. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyRequest

func (GetTrafficPolicyInput) GoString

func (s GetTrafficPolicyInput) GoString() string

GoString returns the string representation

func (*GetTrafficPolicyInput) MarshalFields

func (s *GetTrafficPolicyInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetTrafficPolicyInput) SetId

SetId sets the Id field's value.

func (*GetTrafficPolicyInput) SetVersion

SetVersion sets the Version field's value.

func (GetTrafficPolicyInput) String

func (s GetTrafficPolicyInput) String() string

String returns the string representation

func (*GetTrafficPolicyInput) Validate

func (s *GetTrafficPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetTrafficPolicyInstanceCountInput

type GetTrafficPolicyInstanceCountInput struct {
	// contains filtered or unexported fields
}

Request to get the number of traffic policy instances that are associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyInstanceCountRequest

func (GetTrafficPolicyInstanceCountInput) GoString

GoString returns the string representation

func (*GetTrafficPolicyInstanceCountInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (GetTrafficPolicyInstanceCountInput) String

String returns the string representation

type GetTrafficPolicyInstanceCountOutput

type GetTrafficPolicyInstanceCountOutput struct {

	// The number of traffic policy instances that are associated with the current
	// AWS account.
	//
	// TrafficPolicyInstanceCount is a required field
	TrafficPolicyInstanceCount *int64 `type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyInstanceCountResponse

func (GetTrafficPolicyInstanceCountOutput) GoString

GoString returns the string representation

func (*GetTrafficPolicyInstanceCountOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetTrafficPolicyInstanceCountOutput) SetTrafficPolicyInstanceCount

SetTrafficPolicyInstanceCount sets the TrafficPolicyInstanceCount field's value.

func (GetTrafficPolicyInstanceCountOutput) String

String returns the string representation

type GetTrafficPolicyInstanceInput

type GetTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to get information about.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

Gets information about a specified traffic policy instance. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyInstanceRequest

func (GetTrafficPolicyInstanceInput) GoString

GoString returns the string representation

func (*GetTrafficPolicyInstanceInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetTrafficPolicyInstanceInput) SetId

SetId sets the Id field's value.

func (GetTrafficPolicyInstanceInput) String

String returns the string representation

func (*GetTrafficPolicyInstanceInput) Validate

func (s *GetTrafficPolicyInstanceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type GetTrafficPolicyInstanceOutput

type GetTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the traffic policy instance.
	//
	// TrafficPolicyInstance is a required field
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyInstanceResponse

func (GetTrafficPolicyInstanceOutput) GoString

GoString returns the string representation

func (*GetTrafficPolicyInstanceOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetTrafficPolicyInstanceOutput) SetTrafficPolicyInstance

SetTrafficPolicyInstance sets the TrafficPolicyInstance field's value.

func (GetTrafficPolicyInstanceOutput) String

String returns the string representation

type GetTrafficPolicyOutput

type GetTrafficPolicyOutput struct {

	// A complex type that contains settings for the specified traffic policy.
	//
	// TrafficPolicy is a required field
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyResponse

func (GetTrafficPolicyOutput) GoString

func (s GetTrafficPolicyOutput) GoString() string

GoString returns the string representation

func (*GetTrafficPolicyOutput) MarshalFields

func (s *GetTrafficPolicyOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*GetTrafficPolicyOutput) SetTrafficPolicy

SetTrafficPolicy sets the TrafficPolicy field's value.

func (GetTrafficPolicyOutput) String

func (s GetTrafficPolicyOutput) String() string

String returns the string representation

type HealthCheck

type HealthCheck struct {

	// A unique string that you specified when you created the health check.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that contains information about the CloudWatch alarm that
	// Amazon Route 53 is monitoring for this health check.
	CloudWatchAlarmConfiguration *CloudWatchAlarmConfiguration `type:"structure"`

	// A complex type that contains detailed information about one health check.
	//
	// HealthCheckConfig is a required field
	HealthCheckConfig *HealthCheckConfig `type:"structure" required:"true"`

	// The version of the health check. You can optionally pass this value in a
	// call to UpdateHealthCheck to prevent overwriting another change to the health
	// check.
	//
	// HealthCheckVersion is a required field
	HealthCheckVersion *int64 `min:"1" type:"long" required:"true"`

	// The identifier that Amazon Route 53assigned to the health check when you
	// created it. When you add or update a resource record set, you use this value
	// to specify which health check to use. The value can be up to 64 characters
	// long.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about one health check that is associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/HealthCheck

func (HealthCheck) GoString

func (s HealthCheck) GoString() string

GoString returns the string representation

func (*HealthCheck) MarshalFields

func (s *HealthCheck) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*HealthCheck) SetCallerReference

func (s *HealthCheck) SetCallerReference(v string) *HealthCheck

SetCallerReference sets the CallerReference field's value.

func (*HealthCheck) SetCloudWatchAlarmConfiguration

func (s *HealthCheck) SetCloudWatchAlarmConfiguration(v *CloudWatchAlarmConfiguration) *HealthCheck

SetCloudWatchAlarmConfiguration sets the CloudWatchAlarmConfiguration field's value.

func (*HealthCheck) SetHealthCheckConfig

func (s *HealthCheck) SetHealthCheckConfig(v *HealthCheckConfig) *HealthCheck

SetHealthCheckConfig sets the HealthCheckConfig field's value.

func (*HealthCheck) SetHealthCheckVersion

func (s *HealthCheck) SetHealthCheckVersion(v int64) *HealthCheck

SetHealthCheckVersion sets the HealthCheckVersion field's value.

func (*HealthCheck) SetId

func (s *HealthCheck) SetId(v string) *HealthCheck

SetId sets the Id field's value.

func (HealthCheck) String

func (s HealthCheck) String() string

String returns the string representation

type HealthCheckConfig

type HealthCheckConfig struct {

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	AlarmIdentifier *AlarmIdentifier `type:"structure"`

	// (CALCULATED Health Checks Only) A complex type that contains one ChildHealthCheck
	// element for each health check that you want to associate with a CALCULATED
	// health check.
	ChildHealthChecks []*string `locationNameList:"ChildHealthCheck" type:"list"`

	// Specify whether you want Amazon Route 53 to send the value of FullyQualifiedDomainName
	// to the endpoint in the client_hello message during TLS negotiation. This
	// allows the endpoint to respond to HTTPS health check requests with the applicable
	// SSL/TLS certificate.
	//
	// Some endpoints require that HTTPS requests include the host name in the client_hello
	// message. If you don't enable SNI, the status of the health check will be
	// SSL alert handshake_failure. A health check can also have that status for
	// other reasons. If SNI is enabled and you're still getting the error, check
	// the SSL/TLS configuration on your endpoint and confirm that your certificate
	// is valid.
	//
	// The SSL/TLS certificate on your endpoint includes a domain name in the Common
	// Name field and possibly several more in the Subject Alternative Names field.
	// One of the domain names in the certificate should match the value that you
	// specify for FullyQualifiedDomainName. If the endpoint responds to the client_hello
	// message with a certificate that does not include the domain name that you
	// specified in FullyQualifiedDomainName, a health checker will retry the handshake.
	// In the second attempt, the health checker will omit FullyQualifiedDomainName
	// from the client_hello message.
	EnableSNI *bool `type:"boolean"`

	// The number of consecutive health checks that an endpoint must pass or fail
	// for Amazon Route 53 to change the current status of the endpoint from unhealthy
	// to healthy or vice versa. For more information, see How Amazon Route 53 Determines
	// Whether an Endpoint Is Healthy (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// If you don't specify a value for FailureThreshold, the default value is three
	// health checks.
	FailureThreshold *int64 `min:"1" type:"integer"`

	// Amazon Route 53 behavior depends on whether you specify a value for IPAddress.
	//
	// If you specify a value forIPAddress:
	//
	// Amazon Route 53 sends health check requests to the specified IPv4 or IPv6
	// address and passes the value of FullyQualifiedDomainName in the Host header
	// for all health checks except TCP health checks. This is typically the fully
	// qualified DNS name of the endpoint on which you want Amazon Route 53 to perform
	// health checks.
	//
	// When Amazon Route 53 checks the health of an endpoint, here is how it constructs
	// the Host header:
	//
	//    * If you specify a value of 80 for Port and HTTP or HTTP_STR_MATCH for
	//    Type, Amazon Route 53 passes the value of FullyQualifiedDomainName to
	//    the endpoint in the Host header.
	//
	//    * If you specify a value of 443 for Port and HTTPS or HTTPS_STR_MATCH
	//    for Type, Amazon Route 53 passes the value of FullyQualifiedDomainName
	//    to the endpoint in the Host header.
	//
	//    * If you specify another value for Port and any value except TCP for Type,
	//    Amazon Route 53 passes FullyQualifiedDomainName:Port to the endpoint in
	//    the Host header.
	//
	// If you don't specify a value for FullyQualifiedDomainName, Amazon Route 53
	// substitutes the value of IPAddress in the Host header in each of the preceding
	// cases.
	//
	// If you don't specify a value for IPAddress:
	//
	// Amazon Route 53 sends a DNS request to the domain that you specify for FullyQualifiedDomainName
	// at the interval that you specify for RequestInterval. Using an IPv4 address
	// that DNS returns, Amazon Route 53 then checks the health of the endpoint.
	//
	// If you don't specify a value for IPAddress, Amazon Route 53 uses only IPv4
	// to send health checks to the endpoint. If there's no resource record set
	// with a type of A for the name that you specify for FullyQualifiedDomainName,
	// the health check fails with a "DNS resolution failed" error.
	//
	// If you want to check the health of weighted, latency, or failover resource
	// record sets and you choose to specify the endpoint only by FullyQualifiedDomainName,
	// we recommend that you create a separate health check for each endpoint. For
	// example, create a health check for each HTTP server that is serving content
	// for www.example.com. For the value of FullyQualifiedDomainName, specify the
	// domain name of the server (such as us-east-2-www.example.com), not the name
	// of the resource record sets (www.example.com).
	//
	// In this configuration, if you create a health check for which the value of
	// FullyQualifiedDomainName matches the name of the resource record sets and
	// you then associate the health check with those resource record sets, health
	// check results will be unpredictable.
	//
	// In addition, if the value that you specify for Type is HTTP, HTTPS, HTTP_STR_MATCH,
	// or HTTPS_STR_MATCH, Amazon Route 53 passes the value of FullyQualifiedDomainName
	// in the Host header, as it does when you specify a value for IPAddress. If
	// the value of Type is TCP, Amazon Route 53 doesn't pass a Host header.
	FullyQualifiedDomainName *string `type:"string"`

	// The number of child health checks that are associated with a CALCULATED health
	// that Amazon Route 53 must consider healthy for the CALCULATED health check
	// to be considered healthy. To specify the child health checks that you want
	// to associate with a CALCULATED health check, use the HealthCheckConfig$ChildHealthChecks
	// and HealthCheckConfig$ChildHealthChecks elements.
	//
	// Note the following:
	//
	//    * If you specify a number greater than the number of child health checks,
	//    Amazon Route 53 always considers this health check to be unhealthy.
	//
	//    * If you specify 0, Amazon Route 53 always considers this health check
	//    to be healthy.
	HealthThreshold *int64 `type:"integer"`

	// The IPv4 or IPv6 IP address of the endpoint that you want Amazon Route 53
	// to perform health checks on. If you don't specify a value for IPAddress,
	// Amazon Route 53 sends a DNS request to resolve the domain name that you specify
	// in FullyQualifiedDomainName at the interval that you specify in RequestInterval.
	// Using an IP address returned by DNS, Amazon Route 53 then checks the health
	// of the endpoint.
	//
	// Use one of the following formats for the value of IPAddress:
	//
	//    * IPv4 address: four values between 0 and 255, separated by periods (.),
	//    for example, 192.0.2.44.
	//
	//    * IPv6 address: eight groups of four hexadecimal values, separated by
	//    colons (:), for example, 2001:0db8:85a3:0000:0000:abcd:0001:2345. You
	//    can also shorten IPv6 addresses as described in RFC 5952, for example,
	//    2001:db8:85a3::abcd:1:2345.
	//
	// If the endpoint is an EC2 instance, we recommend that you create an Elastic
	// IP address, associate it with your EC2 instance, and specify the Elastic
	// IP address for IPAddress. This ensures that the IP address of your instance
	// will never change.
	//
	// For more information, see HealthCheckConfig$FullyQualifiedDomainName.
	//
	// Constraints: Amazon Route 53 can't check the health of endpoints for which
	// the IP address is in local, private, non-routable, or multicast ranges. For
	// more information about IP addresses for which you can't create health checks,
	// see the following documents:
	//
	//    * RFC 5735, Special Use IPv4 Addresses (https://tools.ietf.org/html/rfc5735)
	//
	//    * RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space (https://tools.ietf.org/html/rfc6598)
	//
	//    * RFC 5156, Special-Use IPv6 Addresses (https://tools.ietf.org/html/rfc5156)
	//
	// When the value of Type is CALCULATED or CLOUDWATCH_METRIC, omit IPAddress.
	IPAddress *string `type:"string"`

	// When CloudWatch has insufficient data about the metric to determine the alarm
	// state, the status that you want Amazon Route 53 to assign to the health check:
	//
	//    * Healthy: Amazon Route 53 considers the health check to be healthy.
	//
	//    * Unhealthy: Amazon Route 53 considers the health check to be unhealthy.
	//
	//    * LastKnownStatus: Amazon Route 53 uses the status of the health check
	//    from the last time that CloudWatch had sufficient data to determine the
	//    alarm state. For new health checks that have no last known status, the
	//    default status for the health check is healthy.
	InsufficientDataHealthStatus *string `type:"string" enum:"InsufficientDataHealthStatus"`

	// Specify whether you want Amazon Route 53 to invert the status of a health
	// check, for example, to consider a health check unhealthy when it otherwise
	// would be considered healthy.
	Inverted *bool `type:"boolean"`

	// Specify whether you want Amazon Route 53 to measure the latency between health
	// checkers in multiple AWS regions and your endpoint, and to display CloudWatch
	// latency graphs on the Health Checks page in the Amazon Route 53 console.
	//
	// You can't change the value of MeasureLatency after you create a health check.
	MeasureLatency *bool `type:"boolean"`

	// The port on the endpoint on which you want Amazon Route 53 to perform health
	// checks. Specify a value for Port only when you specify a value for IPAddress.
	Port *int64 `min:"1" type:"integer"`

	// A complex type that contains one Region element for each region from which
	// you want Amazon Route 53 health checkers to check the specified endpoint.
	//
	// If you don't specify any regions, Amazon Route 53 health checkers automatically
	// performs checks from all of the regions that are listed under Valid Values.
	//
	// If you update a health check to remove a region that has been performing
	// health checks, Amazon Route 53 will briefly continue to perform checks from
	// that region to ensure that some health checkers are always checking the endpoint
	// (for example, if you replace three regions with four different regions).
	Regions []*string `locationNameList:"Region" min:"3" type:"list"`

	// The number of seconds between the time that Amazon Route 53 gets a response
	// from your endpoint and the time that it sends the next health check request.
	// Each Amazon Route 53 health checker makes requests at this interval.
	//
	// You can't change the value of RequestInterval after you create a health check.
	//
	// If you don't specify a value for RequestInterval, the default value is 30
	// seconds.
	RequestInterval *int64 `min:"10" type:"integer"`

	// The path, if any, that you want Amazon Route 53 to request when performing
	// health checks. The path can be any value for which your endpoint will return
	// an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example,
	// the file /docs/route53-health-check.html.
	ResourcePath *string `type:"string"`

	// If the value of Type is HTTP_STR_MATCH or HTTP_STR_MATCH, the string that
	// you want Amazon Route 53 to search for in the response body from the specified
	// resource. If the string appears in the response body, Amazon Route 53 considers
	// the resource healthy.
	//
	// Amazon Route 53 considers case when searching for SearchString in the response
	// body.
	SearchString *string `type:"string"`

	// The type of health check that you want to create, which indicates how Amazon
	// Route 53 determines whether an endpoint is healthy.
	//
	// You can't change the value of Type after you create a health check.
	//
	// You can create the following types of health checks:
	//
	//    * HTTP: Amazon Route 53 tries to establish a TCP connection. If successful,
	//    Amazon Route 53 submits an HTTP request and waits for an HTTP status code
	//    of 200 or greater and less than 400.
	//
	//    * HTTPS: Amazon Route 53 tries to establish a TCP connection. If successful,
	//    Amazon Route 53 submits an HTTPS request and waits for an HTTP status
	//    code of 200 or greater and less than 400.
	//
	// If you specify HTTPS for the value of Type, the endpoint must support TLS
	//    v1.0 or later.
	//
	//    * HTTP_STR_MATCH: Amazon Route 53 tries to establish a TCP connection.
	//    If successful, Amazon Route 53 submits an HTTP request and searches the
	//    first 5,120 bytes of the response body for the string that you specify
	//    in SearchString.
	//
	//    * HTTPS_STR_MATCH: Amazon Route 53 tries to establish a TCP connection.
	//    If successful, Amazon Route 53 submits an HTTPS request and searches the
	//    first 5,120 bytes of the response body for the string that you specify
	//    in SearchString.
	//
	//    * TCP: Amazon Route 53 tries to establish a TCP connection.
	//
	//    * CLOUDWATCH_METRIC: The health check is associated with a CloudWatch
	//    alarm. If the state of the alarm is OK, the health check is considered
	//    healthy. If the state is ALARM, the health check is considered unhealthy.
	//    If CloudWatch doesn't have sufficient data to determine whether the state
	//    is OK or ALARM, the health check status depends on the setting for InsufficientDataHealthStatus:
	//    Healthy, Unhealthy, or LastKnownStatus.
	//
	//    * CALCULATED: For health checks that monitor the status of other health
	//    checks, Amazon Route 53 adds up the number of health checks that Amazon
	//    Route 53 health checkers consider to be healthy and compares that number
	//    with the value of HealthThreshold.
	//
	// For more information, see How Amazon Route 53 Determines Whether an Endpoint
	// Is Healthy (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"HealthCheckType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health check. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/HealthCheckConfig

func (HealthCheckConfig) GoString

func (s HealthCheckConfig) GoString() string

GoString returns the string representation

func (*HealthCheckConfig) MarshalFields

func (s *HealthCheckConfig) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*HealthCheckConfig) SetAlarmIdentifier

func (s *HealthCheckConfig) SetAlarmIdentifier(v *AlarmIdentifier) *HealthCheckConfig

SetAlarmIdentifier sets the AlarmIdentifier field's value.

func (*HealthCheckConfig) SetChildHealthChecks

func (s *HealthCheckConfig) SetChildHealthChecks(v []*string) *HealthCheckConfig

SetChildHealthChecks sets the ChildHealthChecks field's value.

func (*HealthCheckConfig) SetEnableSNI

func (s *HealthCheckConfig) SetEnableSNI(v bool) *HealthCheckConfig

SetEnableSNI sets the EnableSNI field's value.

func (*HealthCheckConfig) SetFailureThreshold

func (s *HealthCheckConfig) SetFailureThreshold(v int64) *HealthCheckConfig

SetFailureThreshold sets the FailureThreshold field's value.

func (*HealthCheckConfig) SetFullyQualifiedDomainName

func (s *HealthCheckConfig) SetFullyQualifiedDomainName(v string) *HealthCheckConfig

SetFullyQualifiedDomainName sets the FullyQualifiedDomainName field's value.

func (*HealthCheckConfig) SetHealthThreshold

func (s *HealthCheckConfig) SetHealthThreshold(v int64) *HealthCheckConfig

SetHealthThreshold sets the HealthThreshold field's value.

func (*HealthCheckConfig) SetIPAddress

func (s *HealthCheckConfig) SetIPAddress(v string) *HealthCheckConfig

SetIPAddress sets the IPAddress field's value.

func (*HealthCheckConfig) SetInsufficientDataHealthStatus

func (s *HealthCheckConfig) SetInsufficientDataHealthStatus(v string) *HealthCheckConfig

SetInsufficientDataHealthStatus sets the InsufficientDataHealthStatus field's value.

func (*HealthCheckConfig) SetInverted

func (s *HealthCheckConfig) SetInverted(v bool) *HealthCheckConfig

SetInverted sets the Inverted field's value.

func (*HealthCheckConfig) SetMeasureLatency

func (s *HealthCheckConfig) SetMeasureLatency(v bool) *HealthCheckConfig

SetMeasureLatency sets the MeasureLatency field's value.

func (*HealthCheckConfig) SetPort

func (s *HealthCheckConfig) SetPort(v int64) *HealthCheckConfig

SetPort sets the Port field's value.

func (*HealthCheckConfig) SetRegions

func (s *HealthCheckConfig) SetRegions(v []*string) *HealthCheckConfig

SetRegions sets the Regions field's value.

func (*HealthCheckConfig) SetRequestInterval

func (s *HealthCheckConfig) SetRequestInterval(v int64) *HealthCheckConfig

SetRequestInterval sets the RequestInterval field's value.

func (*HealthCheckConfig) SetResourcePath

func (s *HealthCheckConfig) SetResourcePath(v string) *HealthCheckConfig

SetResourcePath sets the ResourcePath field's value.

func (*HealthCheckConfig) SetSearchString

func (s *HealthCheckConfig) SetSearchString(v string) *HealthCheckConfig

SetSearchString sets the SearchString field's value.

func (*HealthCheckConfig) SetType

SetType sets the Type field's value.

func (HealthCheckConfig) String

func (s HealthCheckConfig) String() string

String returns the string representation

func (*HealthCheckConfig) Validate

func (s *HealthCheckConfig) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type HealthCheckObservation

type HealthCheckObservation struct {

	// The IP address of the Amazon Route 53 health checker that provided the failure
	// reason in StatusReport.
	IPAddress *string `type:"string"`

	// The region of the Amazon Route 53 health checker that provided the status
	// in StatusReport.
	Region *string `min:"1" type:"string" enum:"HealthCheckRegion"`

	// A complex type that contains the last failure reason as reported by one Amazon
	// Route 53 health checker and the time of the failed health check.
	StatusReport *StatusReport `type:"structure"`
	// contains filtered or unexported fields
}

A complex type that contains the last failure reason as reported by one Amazon Route 53 health checker. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/HealthCheckObservation

func (HealthCheckObservation) GoString

func (s HealthCheckObservation) GoString() string

GoString returns the string representation

func (*HealthCheckObservation) MarshalFields

func (s *HealthCheckObservation) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*HealthCheckObservation) SetIPAddress

SetIPAddress sets the IPAddress field's value.

func (*HealthCheckObservation) SetRegion

SetRegion sets the Region field's value.

func (*HealthCheckObservation) SetStatusReport

SetStatusReport sets the StatusReport field's value.

func (HealthCheckObservation) String

func (s HealthCheckObservation) String() string

String returns the string representation

type HostedZone

type HostedZone struct {

	// The value that you specified for CallerReference when you created the hosted
	// zone.
	//
	// CallerReference is a required field
	CallerReference *string `min:"1" type:"string" required:"true"`

	// A complex type that includes the Comment and PrivateZone elements. If you
	// omitted the HostedZoneConfig and Comment elements from the request, the Config
	// and Comment elements don't appear in the response.
	Config *HostedZoneConfig `type:"structure"`

	// The ID that Amazon Route 53 assigned to the hosted zone when you created
	// it.
	//
	// Id is a required field
	Id *string `type:"string" required:"true"`

	// The name of the domain. For public hosted zones, this is the name that you
	// have registered with your DNS registrar.
	//
	// For information about how to specify characters other than a-z, 0-9, and
	// - (hyphen) and how to specify internationalized domain names, see CreateHostedZone.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The number of resource record sets in the hosted zone.
	ResourceRecordSetCount *int64 `type:"long"`
	// contains filtered or unexported fields
}

A complex type that contains general information about the hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/HostedZone

func (HostedZone) GoString

func (s HostedZone) GoString() string

GoString returns the string representation

func (*HostedZone) MarshalFields

func (s *HostedZone) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*HostedZone) SetCallerReference

func (s *HostedZone) SetCallerReference(v string) *HostedZone

SetCallerReference sets the CallerReference field's value.

func (*HostedZone) SetConfig

func (s *HostedZone) SetConfig(v *HostedZoneConfig) *HostedZone

SetConfig sets the Config field's value.

func (*HostedZone) SetId

func (s *HostedZone) SetId(v string) *HostedZone

SetId sets the Id field's value.

func (*HostedZone) SetName

func (s *HostedZone) SetName(v string) *HostedZone

SetName sets the Name field's value.

func (*HostedZone) SetResourceRecordSetCount

func (s *HostedZone) SetResourceRecordSetCount(v int64) *HostedZone

SetResourceRecordSetCount sets the ResourceRecordSetCount field's value.

func (HostedZone) String

func (s HostedZone) String() string

String returns the string representation

type HostedZoneConfig

type HostedZoneConfig struct {

	// Any comments that you want to include about the hosted zone.
	Comment *string `type:"string"`

	// A value that indicates whether this is a private hosted zone.
	PrivateZone *bool `type:"boolean"`
	// contains filtered or unexported fields
}

A complex type that contains an optional comment about your hosted zone. If you don't want to specify a comment, omit both the HostedZoneConfig and Comment elements. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/HostedZoneConfig

func (HostedZoneConfig) GoString

func (s HostedZoneConfig) GoString() string

GoString returns the string representation

func (*HostedZoneConfig) MarshalFields

func (s *HostedZoneConfig) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*HostedZoneConfig) SetComment

func (s *HostedZoneConfig) SetComment(v string) *HostedZoneConfig

SetComment sets the Comment field's value.

func (*HostedZoneConfig) SetPrivateZone

func (s *HostedZoneConfig) SetPrivateZone(v bool) *HostedZoneConfig

SetPrivateZone sets the PrivateZone field's value.

func (HostedZoneConfig) String

func (s HostedZoneConfig) String() string

String returns the string representation

type ListGeoLocationsInput

type ListGeoLocationsInput struct {

	// (Optional) The maximum number of geolocations to be included in the response
	// body for this request. If more than MaxItems geolocations remain to be listed,
	// then the value of the IsTruncated element in the response is true.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// The code for the continent with which you want to start listing locations
	// that Amazon Route 53 supports for geolocation. If Amazon Route 53 has already
	// returned a page or more of results, if IsTruncated is true, and if NextContinentCode
	// from the previous response has a value, enter that value in StartContinentCode
	// to return the next page of results.
	//
	// Include StartContinentCode only if you want to list continents. Don't include
	// StartContinentCode when you're listing countries or countries with their
	// subdivisions.
	StartContinentCode *string `location:"querystring" locationName:"startcontinentcode" min:"2" type:"string"`

	// The code for the country with which you want to start listing locations that
	// Amazon Route 53 supports for geolocation. If Amazon Route 53 has already
	// returned a page or more of results, if IsTruncated is true, and if NextCountryCode
	// from the previous response has a value, enter that value in StartCountryCode
	// to return the next page of results.
	//
	// Amazon Route 53 uses the two-letter country codes that are specified in ISO
	// standard 3166-1 alpha-2 (https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2).
	StartCountryCode *string `location:"querystring" locationName:"startcountrycode" min:"1" type:"string"`

	// The code for the subdivision (for example, state or province) with which
	// you want to start listing locations that Amazon Route 53 supports for geolocation.
	// If Amazon Route 53 has already returned a page or more of results, if IsTruncated
	// is true, and if NextSubdivisionCode from the previous response has a value,
	// enter that value in StartSubdivisionCode to return the next page of results.
	//
	// To list subdivisions of a country, you must include both StartCountryCode
	// and StartSubdivisionCode.
	StartSubdivisionCode *string `location:"querystring" locationName:"startsubdivisioncode" min:"1" type:"string"`
	// contains filtered or unexported fields
}

A request to get a list of geographic locations that Amazon Route 53 supports for geolocation resource record sets. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListGeoLocationsRequest

func (ListGeoLocationsInput) GoString

func (s ListGeoLocationsInput) GoString() string

GoString returns the string representation

func (*ListGeoLocationsInput) MarshalFields

func (s *ListGeoLocationsInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListGeoLocationsInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListGeoLocationsInput) SetStartContinentCode

func (s *ListGeoLocationsInput) SetStartContinentCode(v string) *ListGeoLocationsInput

SetStartContinentCode sets the StartContinentCode field's value.

func (*ListGeoLocationsInput) SetStartCountryCode

func (s *ListGeoLocationsInput) SetStartCountryCode(v string) *ListGeoLocationsInput

SetStartCountryCode sets the StartCountryCode field's value.

func (*ListGeoLocationsInput) SetStartSubdivisionCode

func (s *ListGeoLocationsInput) SetStartSubdivisionCode(v string) *ListGeoLocationsInput

SetStartSubdivisionCode sets the StartSubdivisionCode field's value.

func (ListGeoLocationsInput) String

func (s ListGeoLocationsInput) String() string

String returns the string representation

func (*ListGeoLocationsInput) Validate

func (s *ListGeoLocationsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListGeoLocationsOutput

type ListGeoLocationsOutput struct {

	// A complex type that contains one GeoLocationDetails element for each location
	// that Amazon Route 53 supports for geolocation.
	//
	// GeoLocationDetailsList is a required field
	GeoLocationDetailsList []*GeoLocationDetails `locationNameList:"GeoLocationDetails" type:"list" required:"true"`

	// A value that indicates whether more locations remain to be listed after the
	// last location in this response. If so, the value of IsTruncated is true.
	// To get more values, submit another request and include the values of NextContinentCode,
	// NextCountryCode, and NextSubdivisionCode in the StartContinentCode, StartCountryCode,
	// and StartSubdivisionCode, as applicable.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for MaxItems in the request.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextContinentCode in the StartContinentCode
	// parameter in another ListGeoLocations request.
	NextContinentCode *string `min:"2" type:"string"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextCountryCode in the StartCountryCode parameter
	// in another ListGeoLocations request.
	NextCountryCode *string `min:"1" type:"string"`

	// If IsTruncated is true, you can make a follow-up request to display more
	// locations. Enter the value of NextSubdivisionCode in the StartSubdivisionCode
	// parameter in another ListGeoLocations request.
	NextSubdivisionCode *string `min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type containing the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListGeoLocationsResponse

func (ListGeoLocationsOutput) GoString

func (s ListGeoLocationsOutput) GoString() string

GoString returns the string representation

func (*ListGeoLocationsOutput) MarshalFields

func (s *ListGeoLocationsOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListGeoLocationsOutput) SetGeoLocationDetailsList

func (s *ListGeoLocationsOutput) SetGeoLocationDetailsList(v []*GeoLocationDetails) *ListGeoLocationsOutput

SetGeoLocationDetailsList sets the GeoLocationDetailsList field's value.

func (*ListGeoLocationsOutput) SetIsTruncated

func (s *ListGeoLocationsOutput) SetIsTruncated(v bool) *ListGeoLocationsOutput

SetIsTruncated sets the IsTruncated field's value.

func (*ListGeoLocationsOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListGeoLocationsOutput) SetNextContinentCode

func (s *ListGeoLocationsOutput) SetNextContinentCode(v string) *ListGeoLocationsOutput

SetNextContinentCode sets the NextContinentCode field's value.

func (*ListGeoLocationsOutput) SetNextCountryCode

func (s *ListGeoLocationsOutput) SetNextCountryCode(v string) *ListGeoLocationsOutput

SetNextCountryCode sets the NextCountryCode field's value.

func (*ListGeoLocationsOutput) SetNextSubdivisionCode

func (s *ListGeoLocationsOutput) SetNextSubdivisionCode(v string) *ListGeoLocationsOutput

SetNextSubdivisionCode sets the NextSubdivisionCode field's value.

func (ListGeoLocationsOutput) String

func (s ListGeoLocationsOutput) String() string

String returns the string representation

type ListHealthChecksInput

type ListHealthChecksInput struct {

	// If the value of IsTruncated in the previous response was true, you have more
	// health checks. To get another group, submit another ListHealthChecks request.
	//
	// For the value of marker, specify the value of NextMarker from the previous
	// response, which is the ID of the first health check that Amazon Route 53
	// will return if you submit another request.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more health checks to get.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The maximum number of health checks that you want ListHealthChecks to return
	// in response to the current request. Amazon Route 53 returns a maximum of
	// 100 items. If you set MaxItems to a value greater than 100, Amazon Route
	// 53 returns only the first 100 health checks.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

A request to retrieve a list of the health checks that are associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHealthChecksRequest

func (ListHealthChecksInput) GoString

func (s ListHealthChecksInput) GoString() string

GoString returns the string representation

func (*ListHealthChecksInput) MarshalFields

func (s *ListHealthChecksInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListHealthChecksInput) SetMarker

SetMarker sets the Marker field's value.

func (*ListHealthChecksInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (ListHealthChecksInput) String

func (s ListHealthChecksInput) String() string

String returns the string representation

type ListHealthChecksOutput

type ListHealthChecksOutput struct {

	// A complex type that contains one HealthCheck element for each health check
	// that is associated with the current AWS account.
	//
	// HealthChecks is a required field
	HealthChecks []*HealthCheck `locationNameList:"HealthCheck" type:"list" required:"true"`

	// A flag that indicates whether there are more health checks to be listed.
	// If the response was truncated, you can get the next group of health checks
	// by submitting another ListHealthChecks request and specifying the value of
	// NextMarker in the marker parameter.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListHealthChecks, Marker is the value
	// that you specified for the marker parameter in the previous request.
	//
	// Marker is a required field
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHealthChecks
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the first health
	// check that Amazon Route 53 returns if you submit another ListHealthChecks
	// request and specify the value of NextMarker in the marker parameter.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a ListHealthChecks request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHealthChecksResponse

func (ListHealthChecksOutput) GoString

func (s ListHealthChecksOutput) GoString() string

GoString returns the string representation

func (*ListHealthChecksOutput) MarshalFields

func (s *ListHealthChecksOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListHealthChecksOutput) SetHealthChecks

func (s *ListHealthChecksOutput) SetHealthChecks(v []*HealthCheck) *ListHealthChecksOutput

SetHealthChecks sets the HealthChecks field's value.

func (*ListHealthChecksOutput) SetIsTruncated

func (s *ListHealthChecksOutput) SetIsTruncated(v bool) *ListHealthChecksOutput

SetIsTruncated sets the IsTruncated field's value.

func (*ListHealthChecksOutput) SetMarker

SetMarker sets the Marker field's value.

func (*ListHealthChecksOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListHealthChecksOutput) SetNextMarker

SetNextMarker sets the NextMarker field's value.

func (ListHealthChecksOutput) String

func (s ListHealthChecksOutput) String() string

String returns the string representation

type ListHostedZonesByNameInput

type ListHostedZonesByNameInput struct {

	// (Optional) For your first request to ListHostedZonesByName, include the dnsname
	// parameter only if you want to specify the name of the first hosted zone in
	// the response. If you don't include the dnsname parameter, Amazon Route 53
	// returns all of the hosted zones that were created by the current AWS account,
	// in ASCII order. For subsequent requests, include both dnsname and hostedzoneid
	// parameters. For dnsname, specify the value of NextDNSName from the previous
	// response.
	DNSName *string `location:"querystring" locationName:"dnsname" type:"string"`

	// (Optional) For your first request to ListHostedZonesByName, do not include
	// the hostedzoneid parameter.
	//
	// If you have more hosted zones than the value of maxitems, ListHostedZonesByName
	// returns only the first maxitems hosted zones. To get the next group of maxitems
	// hosted zones, submit another request to ListHostedZonesByName and include
	// both dnsname and hostedzoneid parameters. For the value of hostedzoneid,
	// specify the value of the NextHostedZoneId element from the previous response.
	HostedZoneId *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of hosted zones to be included in the response body for
	// this request. If you have more than maxitems hosted zones, then the value
	// of the IsTruncated element in the response is true, and the values of NextDNSName
	// and NextHostedZoneId specify the first hosted zone in the next group of maxitems
	// hosted zones.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

Retrieves a list of the public and private hosted zones that are associated with the current AWS account in ASCII order by domain name. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHostedZonesByNameRequest

func (ListHostedZonesByNameInput) GoString

func (s ListHostedZonesByNameInput) GoString() string

GoString returns the string representation

func (*ListHostedZonesByNameInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListHostedZonesByNameInput) SetDNSName

SetDNSName sets the DNSName field's value.

func (*ListHostedZonesByNameInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListHostedZonesByNameInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (ListHostedZonesByNameInput) String

String returns the string representation

type ListHostedZonesByNameOutput

type ListHostedZonesByNameOutput struct {

	// For the second and subsequent calls to ListHostedZonesByName, DNSName is
	// the value that you specified for the dnsname parameter in the request that
	// produced the current response.
	DNSName *string `type:"string"`

	// The ID that Amazon Route 53 assigned to the hosted zone when you created
	// it.
	HostedZoneId *string `type:"string"`

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZones is a required field
	HostedZones []*HostedZone `locationNameList:"HostedZone" type:"list" required:"true"`

	// A flag that indicates whether there are more hosted zones to be listed. If
	// the response was truncated, you can get the next group of maxitems hosted
	// zones by calling ListHostedZonesByName again and specifying the values of
	// NextDNSName and NextHostedZoneId elements in the dnsname and hostedzoneid
	// parameters.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHostedZonesByName
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextDNSName is the name of the first
	// hosted zone in the next group of maxitems hosted zones. Call ListHostedZonesByName
	// again and specify the value of NextDNSName and NextHostedZoneId in the dnsname
	// and hostedzoneid parameters, respectively.
	//
	// This element is present only if IsTruncated is true.
	NextDNSName *string `type:"string"`

	// If IsTruncated is true, the value of NextHostedZoneId identifies the first
	// hosted zone in the next group of maxitems hosted zones. Call ListHostedZonesByName
	// again and specify the value of NextDNSName and NextHostedZoneId in the dnsname
	// and hostedzoneid parameters, respectively.
	//
	// This element is present only if IsTruncated is true.
	NextHostedZoneId *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHostedZonesByNameResponse

func (ListHostedZonesByNameOutput) GoString

func (s ListHostedZonesByNameOutput) GoString() string

GoString returns the string representation

func (*ListHostedZonesByNameOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListHostedZonesByNameOutput) SetDNSName

SetDNSName sets the DNSName field's value.

func (*ListHostedZonesByNameOutput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListHostedZonesByNameOutput) SetHostedZones

SetHostedZones sets the HostedZones field's value.

func (*ListHostedZonesByNameOutput) SetIsTruncated

SetIsTruncated sets the IsTruncated field's value.

func (*ListHostedZonesByNameOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListHostedZonesByNameOutput) SetNextDNSName

SetNextDNSName sets the NextDNSName field's value.

func (*ListHostedZonesByNameOutput) SetNextHostedZoneId

SetNextHostedZoneId sets the NextHostedZoneId field's value.

func (ListHostedZonesByNameOutput) String

String returns the string representation

type ListHostedZonesInput

type ListHostedZonesInput struct {

	// If you're using reusable delegation sets and you want to list all of the
	// hosted zones that are associated with a reusable delegation set, specify
	// the ID of that reusable delegation set.
	DelegationSetId *string `location:"querystring" locationName:"delegationsetid" type:"string"`

	// If the value of IsTruncated in the previous response was true, you have more
	// hosted zones. To get more hosted zones, submit another ListHostedZones request.
	//
	// For the value of marker, specify the value of NextMarker from the previous
	// response, which is the ID of the first hosted zone that Amazon Route 53 will
	// return if you submit another request.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more hosted zones to get.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// (Optional) The maximum number of hosted zones that you want Amazon Route
	// 53 to return. If you have more than maxitems hosted zones, the value of IsTruncated
	// in the response is true, and the value of NextMarker is the hosted zone ID
	// of the first hosted zone that Amazon Route 53 will return if you submit another
	// request.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

A request to retrieve a list of the public and private hosted zones that are associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHostedZonesRequest

func (ListHostedZonesInput) GoString

func (s ListHostedZonesInput) GoString() string

GoString returns the string representation

func (*ListHostedZonesInput) MarshalFields

func (s *ListHostedZonesInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListHostedZonesInput) SetDelegationSetId

func (s *ListHostedZonesInput) SetDelegationSetId(v string) *ListHostedZonesInput

SetDelegationSetId sets the DelegationSetId field's value.

func (*ListHostedZonesInput) SetMarker

SetMarker sets the Marker field's value.

func (*ListHostedZonesInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (ListHostedZonesInput) String

func (s ListHostedZonesInput) String() string

String returns the string representation

type ListHostedZonesOutput

type ListHostedZonesOutput struct {

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZones is a required field
	HostedZones []*HostedZone `locationNameList:"HostedZone" type:"list" required:"true"`

	// A flag indicating whether there are more hosted zones to be listed. If the
	// response was truncated, you can get more hosted zones by submitting another
	// ListHostedZones request and specifying the value of NextMarker in the marker
	// parameter.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListHostedZones, Marker is the value
	// that you specified for the marker parameter in the request that produced
	// the current response.
	//
	// Marker is a required field
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListHostedZones
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the first hosted
	// zone in the next group of hosted zones. Submit another ListHostedZones request,
	// and specify the value of NextMarker from the response in the marker parameter.
	//
	// This element is present only if IsTruncated is true.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHostedZonesResponse

func (ListHostedZonesOutput) GoString

func (s ListHostedZonesOutput) GoString() string

GoString returns the string representation

func (*ListHostedZonesOutput) MarshalFields

func (s *ListHostedZonesOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListHostedZonesOutput) SetHostedZones

func (s *ListHostedZonesOutput) SetHostedZones(v []*HostedZone) *ListHostedZonesOutput

SetHostedZones sets the HostedZones field's value.

func (*ListHostedZonesOutput) SetIsTruncated

func (s *ListHostedZonesOutput) SetIsTruncated(v bool) *ListHostedZonesOutput

SetIsTruncated sets the IsTruncated field's value.

func (*ListHostedZonesOutput) SetMarker

SetMarker sets the Marker field's value.

func (*ListHostedZonesOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListHostedZonesOutput) SetNextMarker

func (s *ListHostedZonesOutput) SetNextMarker(v string) *ListHostedZonesOutput

SetNextMarker sets the NextMarker field's value.

func (ListHostedZonesOutput) String

func (s ListHostedZonesOutput) String() string

String returns the string representation

type ListQueryLoggingConfigsInput

type ListQueryLoggingConfigsInput struct {

	// (Optional) If you want to list the query logging configuration that is associated
	// with a hosted zone, specify the ID in HostedZoneId.
	//
	// If you don't specify a hosted zone ID, ListQueryLoggingConfigs returns all
	// of the configurations that are associated with the current AWS account.
	HostedZoneId *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// (Optional) The maximum number of query logging configurations that you want
	// Amazon Route 53 to return in response to the current request. If the current
	// AWS account has more than MaxResults configurations, use the value of ListQueryLoggingConfigsResponse$NextToken
	// in the response to get the next page of results.
	//
	// If you don't specify a value for MaxResults, Amazon Route 53 returns up to
	// 100 configurations.
	MaxResults *string `location:"querystring" locationName:"maxresults" type:"string"`

	// (Optional) If the current AWS account has more than MaxResults query logging
	// configurations, use NextToken to get the second and subsequent pages of results.
	//
	// For the first ListQueryLoggingConfigs request, omit this value.
	//
	// For the second and subsequent requests, get the value of NextToken from the
	// previous response and specify that value for NextToken in the request.
	NextToken *string `location:"querystring" locationName:"nexttoken" type:"string"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListQueryLoggingConfigsRequest

func (ListQueryLoggingConfigsInput) GoString

func (s ListQueryLoggingConfigsInput) GoString() string

GoString returns the string representation

func (*ListQueryLoggingConfigsInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListQueryLoggingConfigsInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListQueryLoggingConfigsInput) SetMaxResults

SetMaxResults sets the MaxResults field's value.

func (*ListQueryLoggingConfigsInput) SetNextToken

SetNextToken sets the NextToken field's value.

func (ListQueryLoggingConfigsInput) String

String returns the string representation

type ListQueryLoggingConfigsOutput

type ListQueryLoggingConfigsOutput struct {

	// If a response includes the last of the query logging configurations that
	// are associated with the current AWS account, NextToken doesn't appear in
	// the response.
	//
	// If a response doesn't include the last of the configurations, you can get
	// more configurations by submitting another ListQueryLoggingConfigs request.
	// Get the value of NextToken that Amazon Route 53 returned in the previous
	// response and include it in NextToken in the next request.
	NextToken *string `type:"string"`

	// An array that contains one QueryLoggingConfig element for each configuration
	// for DNS query logging that is associated with the current AWS account.
	//
	// QueryLoggingConfigs is a required field
	QueryLoggingConfigs []*QueryLoggingConfig `locationNameList:"QueryLoggingConfig" type:"list" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListQueryLoggingConfigsResponse

func (ListQueryLoggingConfigsOutput) GoString

GoString returns the string representation

func (*ListQueryLoggingConfigsOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListQueryLoggingConfigsOutput) SetNextToken

SetNextToken sets the NextToken field's value.

func (*ListQueryLoggingConfigsOutput) SetQueryLoggingConfigs

SetQueryLoggingConfigs sets the QueryLoggingConfigs field's value.

func (ListQueryLoggingConfigsOutput) String

String returns the string representation

type ListResourceRecordSetsInput

type ListResourceRecordSetsInput struct {

	// The ID of the hosted zone that contains the resource record sets that you
	// want to list.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// (Optional) The maximum number of resource records sets to include in the
	// response body for this request. If the response includes more than maxitems
	// resource record sets, the value of the IsTruncated element in the response
	// is true, and the values of the NextRecordName and NextRecordType elements
	// in the response identify the first resource record set in the next group
	// of maxitems resource record sets.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// Weighted resource record sets only: If results were truncated for a given
	// DNS name and type, specify the value of NextRecordIdentifier from the previous
	// response to get the next resource record set that has the current DNS name
	// and type.
	StartRecordIdentifier *string `location:"querystring" locationName:"identifier" min:"1" type:"string"`

	// The first name in the lexicographic ordering of resource record sets that
	// you want to list.
	StartRecordName *string `location:"querystring" locationName:"name" type:"string"`

	// The type of resource record set to begin the record listing from.
	//
	// Valid values for basic resource record sets: A | AAAA | CAA | CNAME | MX
	// | NAPTR | NS | PTR | SOA | SPF | SRV | TXT
	//
	// Values for weighted, latency, geo, and failover resource record sets: A |
	// AAAA | CAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT
	//
	// Values for alias resource record sets:
	//
	//    * CloudFront distribution: A or AAAA
	//
	//    * Elastic Beanstalk environment that has a regionalized subdomain: A
	//
	//    * ELB load balancer: A | AAAA
	//
	//    * Amazon S3 bucket: A
	//
	//    * Another resource record set in this hosted zone: The type of the resource
	//    record set that the alias references.
	//
	// Constraint: Specifying type without specifying name returns an InvalidInput
	// error.
	StartRecordType *string `location:"querystring" locationName:"type" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

A request for the resource record sets that are associated with a specified hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListResourceRecordSetsRequest

func (ListResourceRecordSetsInput) GoString

func (s ListResourceRecordSetsInput) GoString() string

GoString returns the string representation

func (*ListResourceRecordSetsInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListResourceRecordSetsInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListResourceRecordSetsInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListResourceRecordSetsInput) SetStartRecordIdentifier

func (s *ListResourceRecordSetsInput) SetStartRecordIdentifier(v string) *ListResourceRecordSetsInput

SetStartRecordIdentifier sets the StartRecordIdentifier field's value.

func (*ListResourceRecordSetsInput) SetStartRecordName

SetStartRecordName sets the StartRecordName field's value.

func (*ListResourceRecordSetsInput) SetStartRecordType

SetStartRecordType sets the StartRecordType field's value.

func (ListResourceRecordSetsInput) String

String returns the string representation

func (*ListResourceRecordSetsInput) Validate

func (s *ListResourceRecordSetsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListResourceRecordSetsOutput

type ListResourceRecordSetsOutput struct {

	// A flag that indicates whether more resource record sets remain to be listed.
	// If your results were truncated, you can make a follow-up pagination request
	// by using the NextRecordName element.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The maximum number of records you requested.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// Weighted, latency, geolocation, and failover resource record sets only: If
	// results were truncated for a given DNS name and type, the value of SetIdentifier
	// for the next resource record set that has the current DNS name and type.
	NextRecordIdentifier *string `min:"1" type:"string"`

	// If the results were truncated, the name of the next record in the list.
	//
	// This element is present only if IsTruncated is true.
	NextRecordName *string `type:"string"`

	// If the results were truncated, the type of the next record in the list.
	//
	// This element is present only if IsTruncated is true.
	NextRecordType *string `type:"string" enum:"RRType"`

	// Information about multiple resource record sets.
	//
	// ResourceRecordSets is a required field
	ResourceRecordSets []*ResourceRecordSet `locationNameList:"ResourceRecordSet" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains list information for the resource record set. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListResourceRecordSetsResponse

func (ListResourceRecordSetsOutput) GoString

func (s ListResourceRecordSetsOutput) GoString() string

GoString returns the string representation

func (*ListResourceRecordSetsOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListResourceRecordSetsOutput) SetIsTruncated

SetIsTruncated sets the IsTruncated field's value.

func (*ListResourceRecordSetsOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListResourceRecordSetsOutput) SetNextRecordIdentifier

func (s *ListResourceRecordSetsOutput) SetNextRecordIdentifier(v string) *ListResourceRecordSetsOutput

SetNextRecordIdentifier sets the NextRecordIdentifier field's value.

func (*ListResourceRecordSetsOutput) SetNextRecordName

SetNextRecordName sets the NextRecordName field's value.

func (*ListResourceRecordSetsOutput) SetNextRecordType

SetNextRecordType sets the NextRecordType field's value.

func (*ListResourceRecordSetsOutput) SetResourceRecordSets

SetResourceRecordSets sets the ResourceRecordSets field's value.

func (ListResourceRecordSetsOutput) String

String returns the string representation

type ListReusableDelegationSetsInput

type ListReusableDelegationSetsInput struct {

	// If the value of IsTruncated in the previous response was true, you have more
	// reusable delegation sets. To get another group, submit another ListReusableDelegationSets
	// request.
	//
	// For the value of marker, specify the value of NextMarker from the previous
	// response, which is the ID of the first reusable delegation set that Amazon
	// Route 53 will return if you submit another request.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more reusable delegation sets to get.
	Marker *string `location:"querystring" locationName:"marker" type:"string"`

	// The number of reusable delegation sets that you want Amazon Route 53 to return
	// in the response to this request. If you specify a value greater than 100,
	// Amazon Route 53 returns only the first 100 reusable delegation sets.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`
	// contains filtered or unexported fields
}

A request to get a list of the reusable delegation sets that are associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListReusableDelegationSetsRequest

func (ListReusableDelegationSetsInput) GoString

GoString returns the string representation

func (*ListReusableDelegationSetsInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListReusableDelegationSetsInput) SetMarker

SetMarker sets the Marker field's value.

func (*ListReusableDelegationSetsInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (ListReusableDelegationSetsInput) String

String returns the string representation

type ListReusableDelegationSetsOutput

type ListReusableDelegationSetsOutput struct {

	// A complex type that contains one DelegationSet element for each reusable
	// delegation set that was created by the current AWS account.
	//
	// DelegationSets is a required field
	DelegationSets []*DelegationSet `locationNameList:"DelegationSet" type:"list" required:"true"`

	// A flag that indicates whether there are more reusable delegation sets to
	// be listed.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// For the second and subsequent calls to ListReusableDelegationSets, Marker
	// is the value that you specified for the marker parameter in the request that
	// produced the current response.
	//
	// Marker is a required field
	Marker *string `type:"string" required:"true"`

	// The value that you specified for the maxitems parameter in the call to ListReusableDelegationSets
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, the value of NextMarker identifies the next reusable
	// delegation set that Amazon Route 53 will return if you submit another ListReusableDelegationSets
	// request and specify the value of NextMarker in the marker parameter.
	NextMarker *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about the reusable delegation sets that are associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListReusableDelegationSetsResponse

func (ListReusableDelegationSetsOutput) GoString

GoString returns the string representation

func (*ListReusableDelegationSetsOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListReusableDelegationSetsOutput) SetDelegationSets

SetDelegationSets sets the DelegationSets field's value.

func (*ListReusableDelegationSetsOutput) SetIsTruncated

SetIsTruncated sets the IsTruncated field's value.

func (*ListReusableDelegationSetsOutput) SetMarker

SetMarker sets the Marker field's value.

func (*ListReusableDelegationSetsOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListReusableDelegationSetsOutput) SetNextMarker

SetNextMarker sets the NextMarker field's value.

func (ListReusableDelegationSetsOutput) String

String returns the string representation

type ListTagsForResourceInput

type ListTagsForResourceInput struct {

	// The ID of the resource for which you want to retrieve tags.
	//
	// ResourceId is a required field
	ResourceId *string `location:"uri" locationName:"ResourceId" type:"string" required:"true"`

	// The type of the resource.
	//
	//    * The resource type for health checks is healthcheck.
	//
	//    * The resource type for hosted zones is hostedzone.
	//
	// ResourceType is a required field
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type containing information about a request for a list of the tags that are associated with an individual resource. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTagsForResourceRequest

func (ListTagsForResourceInput) GoString

func (s ListTagsForResourceInput) GoString() string

GoString returns the string representation

func (*ListTagsForResourceInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTagsForResourceInput) SetResourceId

SetResourceId sets the ResourceId field's value.

func (*ListTagsForResourceInput) SetResourceType

SetResourceType sets the ResourceType field's value.

func (ListTagsForResourceInput) String

func (s ListTagsForResourceInput) String() string

String returns the string representation

func (*ListTagsForResourceInput) Validate

func (s *ListTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForResourceOutput

type ListTagsForResourceOutput struct {

	// A ResourceTagSet containing tags associated with the specified resource.
	//
	// ResourceTagSet is a required field
	ResourceTagSet *ResourceTagSet `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health checks or hosted zones for which you want to list tags. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTagsForResourceResponse

func (ListTagsForResourceOutput) GoString

func (s ListTagsForResourceOutput) GoString() string

GoString returns the string representation

func (*ListTagsForResourceOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTagsForResourceOutput) SetResourceTagSet

SetResourceTagSet sets the ResourceTagSet field's value.

func (ListTagsForResourceOutput) String

func (s ListTagsForResourceOutput) String() string

String returns the string representation

type ListTagsForResourcesInput

type ListTagsForResourcesInput struct {

	// A complex type that contains the ResourceId element for each resource for
	// which you want to get a list of tags.
	//
	// ResourceIds is a required field
	ResourceIds []*string `locationNameList:"ResourceId" min:"1" type:"list" required:"true"`

	// The type of the resources.
	//
	//    * The resource type for health checks is healthcheck.
	//
	//    * The resource type for hosted zones is hostedzone.
	//
	// ResourceType is a required field
	ResourceType *string `location:"uri" locationName:"ResourceType" type:"string" required:"true" enum:"TagResourceType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the health checks or hosted zones for which you want to list tags. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTagsForResourcesRequest

func (ListTagsForResourcesInput) GoString

func (s ListTagsForResourcesInput) GoString() string

GoString returns the string representation

func (*ListTagsForResourcesInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTagsForResourcesInput) SetResourceIds

SetResourceIds sets the ResourceIds field's value.

func (*ListTagsForResourcesInput) SetResourceType

SetResourceType sets the ResourceType field's value.

func (ListTagsForResourcesInput) String

func (s ListTagsForResourcesInput) String() string

String returns the string representation

func (*ListTagsForResourcesInput) Validate

func (s *ListTagsForResourcesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForResourcesOutput

type ListTagsForResourcesOutput struct {

	// A list of ResourceTagSets containing tags associated with the specified resources.
	//
	// ResourceTagSets is a required field
	ResourceTagSets []*ResourceTagSet `locationNameList:"ResourceTagSet" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type containing tags for the specified resources. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTagsForResourcesResponse

func (ListTagsForResourcesOutput) GoString

func (s ListTagsForResourcesOutput) GoString() string

GoString returns the string representation

func (*ListTagsForResourcesOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTagsForResourcesOutput) SetResourceTagSets

SetResourceTagSets sets the ResourceTagSets field's value.

func (ListTagsForResourcesOutput) String

String returns the string representation

type ListTrafficPoliciesInput

type ListTrafficPoliciesInput struct {

	// (Optional) The maximum number of traffic policies that you want Amazon Route
	// 53 to return in response to this request. If you have more than MaxItems
	// traffic policies, the value of IsTruncated in the response is true, and the
	// value of TrafficPolicyIdMarker is the ID of the first traffic policy that
	// Amazon Route 53 will return if you submit another request.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// (Conditional) For your first request to ListTrafficPolicies, don't include
	// the TrafficPolicyIdMarker parameter.
	//
	// If you have more traffic policies than the value of MaxItems, ListTrafficPolicies
	// returns only the first MaxItems traffic policies. To get the next group of
	// policies, submit another request to ListTrafficPolicies. For the value of
	// TrafficPolicyIdMarker, specify the value of TrafficPolicyIdMarker that was
	// returned in the previous response.
	TrafficPolicyIdMarker *string `location:"querystring" locationName:"trafficpolicyid" min:"1" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list the traffic policies that are associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPoliciesRequest

func (ListTrafficPoliciesInput) GoString

func (s ListTrafficPoliciesInput) GoString() string

GoString returns the string representation

func (*ListTrafficPoliciesInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPoliciesInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPoliciesInput) SetTrafficPolicyIdMarker

func (s *ListTrafficPoliciesInput) SetTrafficPolicyIdMarker(v string) *ListTrafficPoliciesInput

SetTrafficPolicyIdMarker sets the TrafficPolicyIdMarker field's value.

func (ListTrafficPoliciesInput) String

func (s ListTrafficPoliciesInput) String() string

String returns the string representation

func (*ListTrafficPoliciesInput) Validate

func (s *ListTrafficPoliciesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPoliciesOutput

type ListTrafficPoliciesOutput struct {

	// A flag that indicates whether there are more traffic policies to be listed.
	// If the response was truncated, you can get the next group of traffic policies
	// by submitting another ListTrafficPolicies request and specifying the value
	// of TrafficPolicyIdMarker in the TrafficPolicyIdMarker request parameter.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the ListTrafficPolicies
	// request that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If the value of IsTruncated is true, TrafficPolicyIdMarker is the ID of the
	// first traffic policy in the next group of MaxItems traffic policies.
	//
	// TrafficPolicyIdMarker is a required field
	TrafficPolicyIdMarker *string `min:"1" type:"string" required:"true"`

	// A list that contains one TrafficPolicySummary element for each traffic policy
	// that was created by the current AWS account.
	//
	// TrafficPolicySummaries is a required field
	TrafficPolicySummaries []*TrafficPolicySummary `locationNameList:"TrafficPolicySummary" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPoliciesResponse

func (ListTrafficPoliciesOutput) GoString

func (s ListTrafficPoliciesOutput) GoString() string

GoString returns the string representation

func (*ListTrafficPoliciesOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPoliciesOutput) SetIsTruncated

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPoliciesOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPoliciesOutput) SetTrafficPolicyIdMarker

func (s *ListTrafficPoliciesOutput) SetTrafficPolicyIdMarker(v string) *ListTrafficPoliciesOutput

SetTrafficPolicyIdMarker sets the TrafficPolicyIdMarker field's value.

func (*ListTrafficPoliciesOutput) SetTrafficPolicySummaries

func (s *ListTrafficPoliciesOutput) SetTrafficPolicySummaries(v []*TrafficPolicySummary) *ListTrafficPoliciesOutput

SetTrafficPolicySummaries sets the TrafficPolicySummaries field's value.

func (ListTrafficPoliciesOutput) String

func (s ListTrafficPoliciesOutput) String() string

String returns the string representation

type ListTrafficPolicyInstancesByHostedZoneInput

type ListTrafficPolicyInstancesByHostedZoneInput struct {

	// The ID of the hosted zone that you want to list traffic policy instances
	// for.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"querystring" locationName:"id" type:"string" required:"true"`

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values
	// of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// represent the first traffic policy instance that Amazon Route 53 will return
	// if you submit another request.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// If the value of IsTruncated in the previous response is true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of trafficpolicyinstancename,
	// specify the value of TrafficPolicyInstanceNameMarker from the previous response,
	// which is the name of the first traffic policy instance in the next group
	// of traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// If the value of IsTruncated in the previous response is true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of trafficpolicyinstancetype,
	// specify the value of TrafficPolicyInstanceTypeMarker from the previous response,
	// which is the type of the first traffic policy instance in the next group
	// of traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

A request for the traffic policy instances that you created in a specified hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesByHostedZoneRequest

func (ListTrafficPolicyInstancesByHostedZoneInput) GoString

GoString returns the string representation

func (*ListTrafficPolicyInstancesByHostedZoneInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPolicyInstancesByHostedZoneInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListTrafficPolicyInstancesByHostedZoneInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesByHostedZoneInput) SetTrafficPolicyInstanceNameMarker

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesByHostedZoneInput) SetTrafficPolicyInstanceTypeMarker

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (ListTrafficPolicyInstancesByHostedZoneInput) String

String returns the string representation

func (*ListTrafficPolicyInstancesByHostedZoneInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyInstancesByHostedZoneOutput

type ListTrafficPolicyInstancesByHostedZoneOutput struct {

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get the next group of traffic
	// policy instances by submitting another ListTrafficPolicyInstancesByHostedZone
	// request and specifying the values of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker in the corresponding request parameters.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the ListTrafficPolicyInstancesByHostedZone
	// request that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance in the next group of traffic policy instances.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance in the next group of traffic policy instances.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// TrafficPolicyInstances is a required field
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesByHostedZoneResponse

func (ListTrafficPolicyInstancesByHostedZoneOutput) GoString

GoString returns the string representation

func (*ListTrafficPolicyInstancesByHostedZoneOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetIsTruncated

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetTrafficPolicyInstanceNameMarker

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetTrafficPolicyInstanceTypeMarker

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (*ListTrafficPolicyInstancesByHostedZoneOutput) SetTrafficPolicyInstances

SetTrafficPolicyInstances sets the TrafficPolicyInstances field's value.

func (ListTrafficPolicyInstancesByHostedZoneOutput) String

String returns the string representation

type ListTrafficPolicyInstancesByPolicyInput

type ListTrafficPolicyInstancesByPolicyInput struct {

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstancesByPolicy request.
	//
	// For the value of hostedzoneid, specify the value of HostedZoneIdMarker from
	// the previous response, which is the hosted zone ID of the first traffic policy
	// instance that Amazon Route 53 will return if you submit another request.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	HostedZoneIdMarker *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of traffic policy instances to be included in the response
	// body for this request. If you have more than MaxItems traffic policy instances,
	// the value of the IsTruncated element in the response is true, and the values
	// of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// represent the first traffic policy instance that Amazon Route 53 will return
	// if you submit another request.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// The ID of the traffic policy for which you want to list traffic policy instances.
	//
	// TrafficPolicyId is a required field
	TrafficPolicyId *string `location:"querystring" locationName:"id" min:"1" type:"string" required:"true"`

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstancesByPolicy request.
	//
	// For the value of trafficpolicyinstancename, specify the value of TrafficPolicyInstanceNameMarker
	// from the previous response, which is the name of the first traffic policy
	// instance that Amazon Route 53 will return if you submit another request.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstancesByPolicy request.
	//
	// For the value of trafficpolicyinstancetype, specify the value of TrafficPolicyInstanceTypeMarker
	// from the previous response, which is the name of the first traffic policy
	// instance that Amazon Route 53 will return if you submit another request.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`

	// The version of the traffic policy for which you want to list traffic policy
	// instances. The version must be associated with the traffic policy that is
	// specified by TrafficPolicyId.
	//
	// TrafficPolicyVersion is a required field
	TrafficPolicyVersion *int64 `location:"querystring" locationName:"version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list your traffic policy instances. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesByPolicyRequest

func (ListTrafficPolicyInstancesByPolicyInput) GoString

GoString returns the string representation

func (*ListTrafficPolicyInstancesByPolicyInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPolicyInstancesByPolicyInput) SetHostedZoneIdMarker

SetHostedZoneIdMarker sets the HostedZoneIdMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetTrafficPolicyId

SetTrafficPolicyId sets the TrafficPolicyId field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetTrafficPolicyInstanceNameMarker

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetTrafficPolicyInstanceTypeMarker

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyInput) SetTrafficPolicyVersion

SetTrafficPolicyVersion sets the TrafficPolicyVersion field's value.

func (ListTrafficPolicyInstancesByPolicyInput) String

String returns the string representation

func (*ListTrafficPolicyInstancesByPolicyInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyInstancesByPolicyOutput

type ListTrafficPolicyInstancesByPolicyOutput struct {

	// If IsTruncated is true, HostedZoneIdMarker is the ID of the hosted zone of
	// the first traffic policy instance in the next group of traffic policy instances.
	HostedZoneIdMarker *string `type:"string"`

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get the next group of traffic
	// policy instances by calling ListTrafficPolicyInstancesByPolicy again and
	// specifying the values of the HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker elements in the corresponding request
	// parameters.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicyInstancesByPolicy
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance in the next group of MaxItems traffic policy
	// instances.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance in the next group of MaxItems traffic policy instances.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// TrafficPolicyInstances is a required field
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesByPolicyResponse

func (ListTrafficPolicyInstancesByPolicyOutput) GoString

GoString returns the string representation

func (*ListTrafficPolicyInstancesByPolicyOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetHostedZoneIdMarker

SetHostedZoneIdMarker sets the HostedZoneIdMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetIsTruncated

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetTrafficPolicyInstanceNameMarker

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetTrafficPolicyInstanceTypeMarker

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (*ListTrafficPolicyInstancesByPolicyOutput) SetTrafficPolicyInstances

SetTrafficPolicyInstances sets the TrafficPolicyInstances field's value.

func (ListTrafficPolicyInstancesByPolicyOutput) String

String returns the string representation

type ListTrafficPolicyInstancesInput

type ListTrafficPolicyInstancesInput struct {

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of HostedZoneId, specify
	// the value of HostedZoneIdMarker from the previous response, which is the
	// hosted zone ID of the first traffic policy instance in the next group of
	// traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	HostedZoneIdMarker *string `location:"querystring" locationName:"hostedzoneid" type:"string"`

	// The maximum number of traffic policy instances that you want Amazon Route
	// 53 to return in response to a ListTrafficPolicyInstances request. If you
	// have more than MaxItems traffic policy instances, the value of the IsTruncated
	// element in the response is true, and the values of HostedZoneIdMarker, TrafficPolicyInstanceNameMarker,
	// and TrafficPolicyInstanceTypeMarker represent the first traffic policy instance
	// in the next group of MaxItems traffic policy instances.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of trafficpolicyinstancename,
	// specify the value of TrafficPolicyInstanceNameMarker from the previous response,
	// which is the name of the first traffic policy instance in the next group
	// of traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceNameMarker *string `location:"querystring" locationName:"trafficpolicyinstancename" type:"string"`

	// If the value of IsTruncated in the previous response was true, you have more
	// traffic policy instances. To get more traffic policy instances, submit another
	// ListTrafficPolicyInstances request. For the value of trafficpolicyinstancetype,
	// specify the value of TrafficPolicyInstanceTypeMarker from the previous response,
	// which is the type of the first traffic policy instance in the next group
	// of traffic policy instances.
	//
	// If the value of IsTruncated in the previous response was false, there are
	// no more traffic policy instances to get.
	TrafficPolicyInstanceTypeMarker *string `location:"querystring" locationName:"trafficpolicyinstancetype" type:"string" enum:"RRType"`
	// contains filtered or unexported fields
}

A request to get information about the traffic policy instances that you created by using the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesRequest

func (ListTrafficPolicyInstancesInput) GoString

GoString returns the string representation

func (*ListTrafficPolicyInstancesInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPolicyInstancesInput) SetHostedZoneIdMarker

SetHostedZoneIdMarker sets the HostedZoneIdMarker field's value.

func (*ListTrafficPolicyInstancesInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesInput) SetTrafficPolicyInstanceNameMarker

func (s *ListTrafficPolicyInstancesInput) SetTrafficPolicyInstanceNameMarker(v string) *ListTrafficPolicyInstancesInput

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesInput) SetTrafficPolicyInstanceTypeMarker

func (s *ListTrafficPolicyInstancesInput) SetTrafficPolicyInstanceTypeMarker(v string) *ListTrafficPolicyInstancesInput

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (ListTrafficPolicyInstancesInput) String

String returns the string representation

type ListTrafficPolicyInstancesOutput

type ListTrafficPolicyInstancesOutput struct {

	// If IsTruncated is true, HostedZoneIdMarker is the ID of the hosted zone of
	// the first traffic policy instance that Amazon Route 53 will return if you
	// submit another ListTrafficPolicyInstances request.
	HostedZoneIdMarker *string `type:"string"`

	// A flag that indicates whether there are more traffic policy instances to
	// be listed. If the response was truncated, you can get more traffic policy
	// instances by calling ListTrafficPolicyInstances again and specifying the
	// values of the HostedZoneIdMarker, TrafficPolicyInstanceNameMarker, and TrafficPolicyInstanceTypeMarker
	// in the corresponding request parameters.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the MaxItems parameter in the call to ListTrafficPolicyInstances
	// that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// If IsTruncated is true, TrafficPolicyInstanceNameMarker is the name of the
	// first traffic policy instance that Amazon Route 53 will return if you submit
	// another ListTrafficPolicyInstances request.
	TrafficPolicyInstanceNameMarker *string `type:"string"`

	// If IsTruncated is true, TrafficPolicyInstanceTypeMarker is the DNS type of
	// the resource record sets that are associated with the first traffic policy
	// instance that Amazon Route 53 will return if you submit another ListTrafficPolicyInstances
	// request.
	TrafficPolicyInstanceTypeMarker *string `type:"string" enum:"RRType"`

	// A list that contains one TrafficPolicyInstance element for each traffic policy
	// instance that matches the elements in the request.
	//
	// TrafficPolicyInstances is a required field
	TrafficPolicyInstances []*TrafficPolicyInstance `locationNameList:"TrafficPolicyInstance" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesResponse

func (ListTrafficPolicyInstancesOutput) GoString

GoString returns the string representation

func (*ListTrafficPolicyInstancesOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPolicyInstancesOutput) SetHostedZoneIdMarker

SetHostedZoneIdMarker sets the HostedZoneIdMarker field's value.

func (*ListTrafficPolicyInstancesOutput) SetIsTruncated

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPolicyInstancesOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstanceNameMarker

func (s *ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstanceNameMarker(v string) *ListTrafficPolicyInstancesOutput

SetTrafficPolicyInstanceNameMarker sets the TrafficPolicyInstanceNameMarker field's value.

func (*ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstanceTypeMarker

func (s *ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstanceTypeMarker(v string) *ListTrafficPolicyInstancesOutput

SetTrafficPolicyInstanceTypeMarker sets the TrafficPolicyInstanceTypeMarker field's value.

func (*ListTrafficPolicyInstancesOutput) SetTrafficPolicyInstances

SetTrafficPolicyInstances sets the TrafficPolicyInstances field's value.

func (ListTrafficPolicyInstancesOutput) String

String returns the string representation

type ListTrafficPolicyVersionsInput

type ListTrafficPolicyVersionsInput struct {

	// Specify the value of Id of the traffic policy for which you want to list
	// all versions.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`

	// The maximum number of traffic policy versions that you want Amazon Route
	// 53 to include in the response body for this request. If the specified traffic
	// policy has more than MaxItems versions, the value of IsTruncated in the response
	// is true, and the value of the TrafficPolicyVersionMarker element is the ID
	// of the first version that Amazon Route 53 will return if you submit another
	// request.
	MaxItems *string `location:"querystring" locationName:"maxitems" type:"string"`

	// For your first request to ListTrafficPolicyVersions, don't include the TrafficPolicyVersionMarker
	// parameter.
	//
	// If you have more traffic policy versions than the value of MaxItems, ListTrafficPolicyVersions
	// returns only the first group of MaxItems versions. To get more traffic policy
	// versions, submit another ListTrafficPolicyVersions request. For the value
	// of TrafficPolicyVersionMarker, specify the value of TrafficPolicyVersionMarker
	// in the previous response.
	TrafficPolicyVersionMarker *string `location:"querystring" locationName:"trafficpolicyversion" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the information about the request to list your traffic policies. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyVersionsRequest

func (ListTrafficPolicyVersionsInput) GoString

GoString returns the string representation

func (*ListTrafficPolicyVersionsInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPolicyVersionsInput) SetId

SetId sets the Id field's value.

func (*ListTrafficPolicyVersionsInput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyVersionsInput) SetTrafficPolicyVersionMarker

func (s *ListTrafficPolicyVersionsInput) SetTrafficPolicyVersionMarker(v string) *ListTrafficPolicyVersionsInput

SetTrafficPolicyVersionMarker sets the TrafficPolicyVersionMarker field's value.

func (ListTrafficPolicyVersionsInput) String

String returns the string representation

func (*ListTrafficPolicyVersionsInput) Validate

func (s *ListTrafficPolicyVersionsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTrafficPolicyVersionsOutput

type ListTrafficPolicyVersionsOutput struct {

	// A flag that indicates whether there are more traffic policies to be listed.
	// If the response was truncated, you can get the next group of traffic policies
	// by submitting another ListTrafficPolicyVersions request and specifying the
	// value of NextMarker in the marker parameter.
	//
	// IsTruncated is a required field
	IsTruncated *bool `type:"boolean" required:"true"`

	// The value that you specified for the maxitems parameter in the ListTrafficPolicyVersions
	// request that produced the current response.
	//
	// MaxItems is a required field
	MaxItems *string `type:"string" required:"true"`

	// A list that contains one TrafficPolicy element for each traffic policy version
	// that is associated with the specified traffic policy.
	//
	// TrafficPolicies is a required field
	TrafficPolicies []*TrafficPolicy `locationNameList:"TrafficPolicy" type:"list" required:"true"`

	// If IsTruncated is true, the value of TrafficPolicyVersionMarker identifies
	// the first traffic policy that Amazon Route 53 will return if you submit another
	// request. Call ListTrafficPolicyVersions again and specify the value of TrafficPolicyVersionMarker
	// in the TrafficPolicyVersionMarker request parameter.
	//
	// This element is present only if IsTruncated is true.
	//
	// TrafficPolicyVersionMarker is a required field
	TrafficPolicyVersionMarker *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyVersionsResponse

func (ListTrafficPolicyVersionsOutput) GoString

GoString returns the string representation

func (*ListTrafficPolicyVersionsOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListTrafficPolicyVersionsOutput) SetIsTruncated

SetIsTruncated sets the IsTruncated field's value.

func (*ListTrafficPolicyVersionsOutput) SetMaxItems

SetMaxItems sets the MaxItems field's value.

func (*ListTrafficPolicyVersionsOutput) SetTrafficPolicies

SetTrafficPolicies sets the TrafficPolicies field's value.

func (*ListTrafficPolicyVersionsOutput) SetTrafficPolicyVersionMarker

func (s *ListTrafficPolicyVersionsOutput) SetTrafficPolicyVersionMarker(v string) *ListTrafficPolicyVersionsOutput

SetTrafficPolicyVersionMarker sets the TrafficPolicyVersionMarker field's value.

func (ListTrafficPolicyVersionsOutput) String

String returns the string representation

type ListVPCAssociationAuthorizationsInput

type ListVPCAssociationAuthorizationsInput struct {

	// The ID of the hosted zone for which you want a list of VPCs that can be associated
	// with the hosted zone.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"uri" locationName:"Id" type:"string" required:"true"`

	// Optional: An integer that specifies the maximum number of VPCs that you want
	// Amazon Route 53 to return. If you don't specify a value for MaxResults, Amazon
	// Route 53 returns up to 50 VPCs per page.
	MaxResults *string `location:"querystring" locationName:"maxresults" type:"string"`

	// Optional: If a response includes a NextToken element, there are more VPCs
	// that can be associated with the specified hosted zone. To get the next page
	// of results, submit another request, and include the value of NextToken from
	// the response in the nexttoken parameter in another ListVPCAssociationAuthorizations
	// request.
	NextToken *string `location:"querystring" locationName:"nexttoken" type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about that can be associated with your hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListVPCAssociationAuthorizationsRequest

func (ListVPCAssociationAuthorizationsInput) GoString

GoString returns the string representation

func (*ListVPCAssociationAuthorizationsInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListVPCAssociationAuthorizationsInput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListVPCAssociationAuthorizationsInput) SetMaxResults

SetMaxResults sets the MaxResults field's value.

func (*ListVPCAssociationAuthorizationsInput) SetNextToken

SetNextToken sets the NextToken field's value.

func (ListVPCAssociationAuthorizationsInput) String

String returns the string representation

func (*ListVPCAssociationAuthorizationsInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type ListVPCAssociationAuthorizationsOutput

type ListVPCAssociationAuthorizationsOutput struct {

	// The ID of the hosted zone that you can associate the listed VPCs with.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// When the response includes a NextToken element, there are more VPCs that
	// can be associated with the specified hosted zone. To get the next page of
	// VPCs, submit another ListVPCAssociationAuthorizations request, and include
	// the value of the NextToken element from the response in the nexttoken request
	// parameter.
	NextToken *string `type:"string"`

	// The list of VPCs that are authorized to be associated with the specified
	// hosted zone.
	//
	// VPCs is a required field
	VPCs []*VPC `locationNameList:"VPC" min:"1" type:"list" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListVPCAssociationAuthorizationsResponse

func (ListVPCAssociationAuthorizationsOutput) GoString

GoString returns the string representation

func (*ListVPCAssociationAuthorizationsOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ListVPCAssociationAuthorizationsOutput) SetHostedZoneId

SetHostedZoneId sets the HostedZoneId field's value.

func (*ListVPCAssociationAuthorizationsOutput) SetNextToken

SetNextToken sets the NextToken field's value.

func (*ListVPCAssociationAuthorizationsOutput) SetVPCs

SetVPCs sets the VPCs field's value.

func (ListVPCAssociationAuthorizationsOutput) String

String returns the string representation

type QueryLoggingConfig

type QueryLoggingConfig struct {

	// The Amazon Resource Name (ARN) of the CloudWatch Logs log group that Amazon
	// Route 53 is publishing logs to.
	//
	// CloudWatchLogsLogGroupArn is a required field
	CloudWatchLogsLogGroupArn *string `type:"string" required:"true"`

	// The ID of the hosted zone that CloudWatch Logs is logging queries for.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// The ID for a configuration for DNS query logging.
	//
	// Id is a required field
	Id *string `min:"1" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about a configuration for DNS query logging. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/QueryLoggingConfig

func (QueryLoggingConfig) GoString

func (s QueryLoggingConfig) GoString() string

GoString returns the string representation

func (*QueryLoggingConfig) MarshalFields

func (s *QueryLoggingConfig) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*QueryLoggingConfig) SetCloudWatchLogsLogGroupArn

func (s *QueryLoggingConfig) SetCloudWatchLogsLogGroupArn(v string) *QueryLoggingConfig

SetCloudWatchLogsLogGroupArn sets the CloudWatchLogsLogGroupArn field's value.

func (*QueryLoggingConfig) SetHostedZoneId

func (s *QueryLoggingConfig) SetHostedZoneId(v string) *QueryLoggingConfig

SetHostedZoneId sets the HostedZoneId field's value.

func (*QueryLoggingConfig) SetId

SetId sets the Id field's value.

func (QueryLoggingConfig) String

func (s QueryLoggingConfig) String() string

String returns the string representation

type ResourceRecord

type ResourceRecord struct {

	// The current or new DNS record value, not to exceed 4,000 characters. In the
	// case of a DELETE action, if the current value does not match the actual value,
	// an error is returned. For descriptions about how to format Value for different
	// record types, see Supported DNS Resource Record Types (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// You can specify more than one value for all record types except CNAME and
	// SOA.
	//
	// If you're creating an alias resource record set, omit Value.
	//
	// Value is a required field
	Value *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

Information specific to the resource record.

If you're creating an alias resource record set, omit ResourceRecord. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ResourceRecord

func (ResourceRecord) GoString

func (s ResourceRecord) GoString() string

GoString returns the string representation

func (*ResourceRecord) MarshalFields

func (s *ResourceRecord) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ResourceRecord) SetValue

func (s *ResourceRecord) SetValue(v string) *ResourceRecord

SetValue sets the Value field's value.

func (ResourceRecord) String

func (s ResourceRecord) String() string

String returns the string representation

func (*ResourceRecord) Validate

func (s *ResourceRecord) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResourceRecordSet

type ResourceRecordSet struct {

	// Alias resource record sets only: Information about the CloudFront distribution,
	// AWS Elastic Beanstalk environment, ELB load balancer, Amazon S3 bucket, or
	// Amazon Route 53 resource record set to which you're redirecting queries.
	// The AWS Elastic Beanstalk environment must have a regionalized subdomain.
	//
	// If you're creating resource records sets for a private hosted zone, note
	// the following:
	//
	//    * You can't create alias resource record sets for CloudFront distributions
	//    in a private hosted zone.
	//
	//    * Creating geolocation alias resource record sets or latency alias resource
	//    record sets in a private hosted zone is unsupported.
	//
	//    * For information about creating failover resource record sets in a private
	//    hosted zone, see Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	//    in the Amazon Route 53 Developer Guide.
	AliasTarget *AliasTarget `type:"structure"`

	// Failover resource record sets only: To configure failover, you add the Failover
	// element to two resource record sets. For one resource record set, you specify
	// PRIMARY as the value for Failover; for the other resource record set, you
	// specify SECONDARY. In addition, you include the HealthCheckId element and
	// specify the health check that you want Amazon Route 53 to perform for each
	// resource record set.
	//
	// Except where noted, the following failover behaviors assume that you have
	// included the HealthCheckId element in both resource record sets:
	//
	//    * When the primary resource record set is healthy, Amazon Route 53 responds
	//    to DNS queries with the applicable value from the primary resource record
	//    set regardless of the health of the secondary resource record set.
	//
	//    * When the primary resource record set is unhealthy and the secondary
	//    resource record set is healthy, Amazon Route 53 responds to DNS queries
	//    with the applicable value from the secondary resource record set.
	//
	//    * When the secondary resource record set is unhealthy, Amazon Route 53
	//    responds to DNS queries with the applicable value from the primary resource
	//    record set regardless of the health of the primary resource record set.
	//
	//    * If you omit the HealthCheckId element for the secondary resource record
	//    set, and if the primary resource record set is unhealthy, Amazon Route
	//    53 always responds to DNS queries with the applicable value from the secondary
	//    resource record set. This is true regardless of the health of the associated
	//    endpoint.
	//
	// You can't create non-failover resource record sets that have the same values
	// for the Name and Type elements as failover resource record sets.
	//
	// For failover alias resource record sets, you must also include the EvaluateTargetHealth
	// element and set the value to true.
	//
	// For more information about configuring failover for Amazon Route 53, see
	// the following topics in the Amazon Route 53 Developer Guide:
	//
	//    * Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	//
	//    * Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	Failover *string `type:"string" enum:"ResourceRecordSetFailover"`

	// Geo location resource record sets only: A complex type that lets you control
	// how Amazon Route 53 responds to DNS queries based on the geographic origin
	// of the query. For example, if you want all queries from Africa to be routed
	// to a web server with an IP address of 192.0.2.111, create a resource record
	// set with a Type of A and a ContinentCode of AF.
	//
	// Creating geolocation and geolocation alias resource record sets in private
	// hosted zones is not supported.
	//
	// If you create separate resource record sets for overlapping geographic regions
	// (for example, one resource record set for a continent and one for a country
	// on the same continent), priority goes to the smallest geographic region.
	// This allows you to route most queries for a continent to one resource and
	// to route queries for a country on that continent to a different resource.
	//
	// You can't create two geolocation resource record sets that specify the same
	// geographic location.
	//
	// The value * in the CountryCode element matches all geographic locations that
	// aren't specified in other geolocation resource record sets that have the
	// same values for the Name and Type elements.
	//
	// Geolocation works by mapping IP addresses to locations. However, some IP
	// addresses aren't mapped to geographic locations, so even if you create geolocation
	// resource record sets that cover all seven continents, Amazon Route 53 will
	// receive some DNS queries from locations that it can't identify. We recommend
	// that you create a resource record set for which the value of CountryCode
	// is *, which handles both queries that come from locations for which you haven't
	// created geolocation resource record sets and queries from IP addresses that
	// aren't mapped to a location. If you don't create a * resource record set,
	// Amazon Route 53 returns a "no answer" response for queries from those locations.
	//
	// You can't create non-geolocation resource record sets that have the same
	// values for the Name and Type elements as geolocation resource record sets.
	GeoLocation *GeoLocation `type:"structure"`

	// If you want Amazon Route 53 to return this resource record set in response
	// to a DNS query only when a health check is passing, include the HealthCheckId
	// element and specify the ID of the applicable health check.
	//
	// Amazon Route 53 determines whether a resource record set is healthy based
	// on one of the following:
	//
	//    * By periodically sending a request to the endpoint that is specified
	//    in the health check
	//
	//    * By aggregating the status of a specified group of health checks (calculated
	//    health checks)
	//
	//    * By determining the current state of a CloudWatch alarm (CloudWatch metric
	//    health checks)
	//
	// For more information, see How Amazon Route 53 Determines Whether an Endpoint
	// Is Healthy (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html).
	//
	// The HealthCheckId element is only useful when Amazon Route 53 is choosing
	// between two or more resource record sets to respond to a DNS query, and you
	// want Amazon Route 53 to base the choice in part on the status of a health
	// check. Configuring health checks only makes sense in the following configurations:
	//
	//    * You're checking the health of the resource record sets in a group of
	//    weighted, latency, geolocation, or failover resource record sets, and
	//    you specify health check IDs for all of the resource record sets. If the
	//    health check for one resource record set specifies an endpoint that is
	//    not healthy, Amazon Route 53 stops responding to queries using the value
	//    for that resource record set.
	//
	//    * You set EvaluateTargetHealth to true for the resource record sets in
	//    a group of alias, weighted alias, latency alias, geolocation alias, or
	//    failover alias resource record sets, and you specify health check IDs
	//    for all of the resource record sets that are referenced by the alias resource
	//    record sets.
	//
	// Amazon Route 53 doesn't check the health of the endpoint specified in the
	// resource record set, for example, the endpoint specified by the IP address
	// in the Value element. When you add a HealthCheckId element to a resource
	// record set, Amazon Route 53 checks the health of the endpoint that you specified
	// in the health check.
	//
	// For geolocation resource record sets, if an endpoint is unhealthy, Amazon
	// Route 53 looks for a resource record set for the larger, associated geographic
	// region. For example, suppose you have resource record sets for a state in
	// the United States, for the United States, for North America, and for all
	// locations. If the endpoint for the state resource record set is unhealthy,
	// Amazon Route 53 checks the resource record sets for the United States, for
	// North America, and for all locations (a resource record set for which the
	// value of CountryCode is *), in that order, until it finds a resource record
	// set for which the endpoint is healthy.
	//
	// If your health checks specify the endpoint only by domain name, we recommend
	// that you create a separate health check for each endpoint. For example, create
	// a health check for each HTTP server that is serving content for www.example.com.
	// For the value of FullyQualifiedDomainName, specify the domain name of the
	// server (such as us-east-2-www.example.com), not the name of the resource
	// record sets (example.com).
	//
	// n this configuration, if you create a health check for which the value of
	// FullyQualifiedDomainName matches the name of the resource record sets and
	// then associate the health check with those resource record sets, health check
	// results will be unpredictable.
	//
	// For more information, see the following topics in the Amazon Route 53 Developer
	// Guide:
	//
	//    * Amazon Route 53 Health Checks and DNS Failover (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover.html)
	//
	//    * Configuring Failover in a Private Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-private-hosted-zones.html)
	HealthCheckId *string `type:"string"`

	// Multivalue answer resource record sets only: To route traffic approximately
	// randomly to multiple resources, such as web servers, create one multivalue
	// answer record for each resource and specify true for MultiValueAnswer. Note
	// the following:
	//
	//    * If you associate a health check with a multivalue answer resource record
	//    set, Amazon Route 53 responds to DNS queries with the corresponding IP
	//    address only when the health check is healthy.
	//
	//    * If you don't associate a health check with a multivalue answer record,
	//    Amazon Route 53 always considers the record to be healthy.
	//
	//    * Amazon Route 53 responds to DNS queries with up to eight healthy records;
	//    if you have eight or fewer healthy records, Amazon Route 53 responds to
	//    all DNS queries with all the healthy records.
	//
	//    * If you have more than eight healthy records, Amazon Route 53 responds
	//    to different DNS resolvers with different combinations of healthy records.
	//
	//    * When all records are unhealthy, Amazon Route 53 responds to DNS queries
	//    with up to eight unhealthy records.
	//
	//    * If a resource becomes unavailable after a resolver caches a response,
	//    client software typically tries another of the IP addresses in the response.
	//
	// You can't create multivalue answer alias records.
	MultiValueAnswer *bool `type:"boolean"`

	// The name of the domain you want to perform the action on.
	//
	// Enter a fully qualified domain name, for example, www.example.com. You can
	// optionally include a trailing dot. If you omit the trailing dot, Amazon Route
	// 53 still assumes that the domain name that you specify is fully qualified.
	// This means that Amazon Route 53 treats www.example.com (without a trailing
	// dot) and www.example.com. (with a trailing dot) as identical.
	//
	// For information about how to specify characters other than a-z, 0-9, and
	// - (hyphen) and how to specify internationalized domain names, see DNS Domain
	// Name Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// You can use the asterisk (*) wildcard to replace the leftmost label in a
	// domain name, for example, *.example.com. Note the following:
	//
	//    * The * must replace the entire label. For example, you can't specify
	//    *prod.example.com or prod*.example.com.
	//
	//    * The * can't replace any of the middle labels, for example, marketing.*.example.com.
	//
	//    * If you include * in any position other than the leftmost label in a
	//    domain name, DNS treats it as an * character (ASCII 42), not as a wildcard.
	//
	// You can't use the * wildcard for resource records sets that have a type of
	//    NS.
	//
	// You can use the * wildcard as the leftmost label in a domain name, for example,
	// *.example.com. You can't use an * for one of the middle labels, for example,
	// marketing.*.example.com. In addition, the * must replace the entire label;
	// for example, you can't specify prod*.example.com.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// Latency-based resource record sets only: The Amazon EC2 Region where you
	// created the resource that this resource record set refers to. The resource
	// typically is an AWS resource, such as an EC2 instance or an ELB load balancer,
	// and is referred to by an IP address or a DNS domain name, depending on the
	// record type.
	//
	// Creating latency and latency alias resource record sets in private hosted
	// zones is not supported.
	//
	// When Amazon Route 53 receives a DNS query for a domain name and type for
	// which you have created latency resource record sets, Amazon Route 53 selects
	// the latency resource record set that has the lowest latency between the end
	// user and the associated Amazon EC2 Region. Amazon Route 53 then returns the
	// value that is associated with the selected resource record set.
	//
	// Note the following:
	//
	//    * You can only specify one ResourceRecord per latency resource record
	//    set.
	//
	//    * You can only create one latency resource record set for each Amazon
	//    EC2 Region.
	//
	//    * You aren't required to create latency resource record sets for all Amazon
	//    EC2 Regions. Amazon Route 53 will choose the region with the best latency
	//    from among the regions that you create latency resource record sets for.
	//
	//    * You can't create non-latency resource record sets that have the same
	//    values for the Name and Type elements as latency resource record sets.
	Region *string `min:"1" type:"string" enum:"ResourceRecordSetRegion"`

	// Information about the resource records to act upon.
	//
	// If you're creating an alias resource record set, omit ResourceRecords.
	ResourceRecords []*ResourceRecord `locationNameList:"ResourceRecord" min:"1" type:"list"`

	// Weighted, Latency, Geo, and Failover resource record sets only: An identifier
	// that differentiates among multiple resource record sets that have the same
	// combination of DNS name and type. The value of SetIdentifier must be unique
	// for each resource record set that has the same combination of DNS name and
	// type. Omit SetIdentifier for any other types of record sets.
	SetIdentifier *string `min:"1" type:"string"`

	// The resource record cache time to live (TTL), in seconds. Note the following:
	//
	//    * If you're creating or updating an alias resource record set, omit TTL.
	//    Amazon Route 53 uses the value of TTL for the alias target.
	//
	//    * If you're associating this resource record set with a health check (if
	//    you're adding a HealthCheckId element), we recommend that you specify
	//    a TTL of 60 seconds or less so clients respond quickly to changes in health
	//    status.
	//
	//    * All of the resource record sets in a group of weighted resource record
	//    sets must have the same value for TTL.
	//
	//    * If a group of weighted resource record sets includes one or more weighted
	//    alias resource record sets for which the alias target is an ELB load balancer,
	//    we recommend that you specify a TTL of 60 seconds for all of the non-alias
	//    weighted resource record sets that have the same name and type. Values
	//    other than 60 seconds (the TTL for load balancers) will change the effect
	//    of the values that you specify for Weight.
	TTL *int64 `type:"long"`

	// When you create a traffic policy instance, Amazon Route 53 automatically
	// creates a resource record set. TrafficPolicyInstanceId is the ID of the traffic
	// policy instance that Amazon Route 53 created this resource record set for.
	//
	// To delete the resource record set that is associated with a traffic policy
	// instance, use DeleteTrafficPolicyInstance. Amazon Route 53 will delete the
	// resource record set automatically. If you delete the resource record set
	// by using ChangeResourceRecordSets, Amazon Route 53 doesn't automatically
	// delete the traffic policy instance, and you'll continue to be charged for
	// it even though it's no longer in use.
	TrafficPolicyInstanceId *string `min:"1" type:"string"`

	// The DNS record type. For information about different record types and how
	// data is encoded for them, see Supported DNS Resource Record Types (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/ResourceRecordTypes.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// Valid values for basic resource record sets: A | AAAA | CAA | CNAME | MX
	// | NAPTR | NS | PTR | SOA | SPF | SRV | TXT
	//
	// Values for weighted, latency, geolocation, and failover resource record sets:
	// A | AAAA | CAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXT. When creating
	// a group of weighted, latency, geolocation, or failover resource record sets,
	// specify the same value for all of the resource record sets in the group.
	//
	// Valid values for multivalue answer resource record sets: A | AAAA | MX |
	// NAPTR | PTR | SPF | SRV | TXT
	//
	// SPF records were formerly used to verify the identity of the sender of email
	// messages. However, we no longer recommend that you create resource record
	// sets for which the value of Type is SPF. RFC 7208, Sender Policy Framework
	// (SPF) for Authorizing Use of Domains in Email, Version 1, has been updated
	// to say, "...[I]ts existence and mechanism defined in [RFC4408] have led to
	// some interoperability issues. Accordingly, its use is no longer appropriate
	// for SPF version 1; implementations are not to use it." In RFC 7208, see section
	// 14.1, The SPF DNS Record Type (http://tools.ietf.org/html/rfc7208#section-14.1).
	//
	// Values for alias resource record sets:
	//
	//    * CloudFront distributions:A
	//
	// If IPv6 is enabled for the distribution, create two resource record sets
	//    to route traffic to your distribution, one with a value of A and one with
	//    a value of AAAA.
	//
	//    * AWS Elastic Beanstalk environment that has a regionalized subdomain:
	//    A
	//
	//    * ELB load balancers:A | AAAA
	//
	//    * Amazon S3 buckets:A
	//
	//    * Another resource record set in this hosted zone: Specify the type of
	//    the resource record set that you're creating the alias for. All values
	//    are supported except NS and SOA.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"RRType"`

	// Weighted resource record sets only: Among resource record sets that have
	// the same combination of DNS name and type, a value that determines the proportion
	// of DNS queries that Amazon Route 53 responds to using the current resource
	// record set. Amazon Route 53 calculates the sum of the weights for the resource
	// record sets that have the same combination of DNS name and type. Amazon Route
	// 53 then responds to queries based on the ratio of a resource's weight to
	// the total. Note the following:
	//
	//    * You must specify a value for the Weight element for every weighted resource
	//    record set.
	//
	//    * You can only specify one ResourceRecord per weighted resource record
	//    set.
	//
	//    * You can't create latency, failover, or geolocation resource record sets
	//    that have the same values for the Name and Type elements as weighted resource
	//    record sets.
	//
	//    * You can create a maximum of 100 weighted resource record sets that have
	//    the same values for the Name and Type elements.
	//
	//    * For weighted (but not weighted alias) resource record sets, if you set
	//    Weight to 0 for a resource record set, Amazon Route 53 never responds
	//    to queries with the applicable value for that resource record set. However,
	//    if you set Weight to 0 for all resource record sets that have the same
	//    combination of DNS name and type, traffic is routed to all resources with
	//    equal probability.
	//
	// The effect of setting Weight to 0 is different when you associate health
	//    checks with weighted resource record sets. For more information, see Options
	//    for Configuring Amazon Route 53 Active-Active and Active-Passive Failover
	//    (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-configuring-options.html)
	//    in the Amazon Route 53 Developer Guide.
	Weight *int64 `type:"long"`
	// contains filtered or unexported fields
}

Information about the resource record set to create or delete. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ResourceRecordSet

func (ResourceRecordSet) GoString

func (s ResourceRecordSet) GoString() string

GoString returns the string representation

func (*ResourceRecordSet) MarshalFields

func (s *ResourceRecordSet) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ResourceRecordSet) SetAliasTarget

func (s *ResourceRecordSet) SetAliasTarget(v *AliasTarget) *ResourceRecordSet

SetAliasTarget sets the AliasTarget field's value.

func (*ResourceRecordSet) SetFailover

func (s *ResourceRecordSet) SetFailover(v string) *ResourceRecordSet

SetFailover sets the Failover field's value.

func (*ResourceRecordSet) SetGeoLocation

func (s *ResourceRecordSet) SetGeoLocation(v *GeoLocation) *ResourceRecordSet

SetGeoLocation sets the GeoLocation field's value.

func (*ResourceRecordSet) SetHealthCheckId

func (s *ResourceRecordSet) SetHealthCheckId(v string) *ResourceRecordSet

SetHealthCheckId sets the HealthCheckId field's value.

func (*ResourceRecordSet) SetMultiValueAnswer

func (s *ResourceRecordSet) SetMultiValueAnswer(v bool) *ResourceRecordSet

SetMultiValueAnswer sets the MultiValueAnswer field's value.

func (*ResourceRecordSet) SetName

SetName sets the Name field's value.

func (*ResourceRecordSet) SetRegion

func (s *ResourceRecordSet) SetRegion(v string) *ResourceRecordSet

SetRegion sets the Region field's value.

func (*ResourceRecordSet) SetResourceRecords

func (s *ResourceRecordSet) SetResourceRecords(v []*ResourceRecord) *ResourceRecordSet

SetResourceRecords sets the ResourceRecords field's value.

func (*ResourceRecordSet) SetSetIdentifier

func (s *ResourceRecordSet) SetSetIdentifier(v string) *ResourceRecordSet

SetSetIdentifier sets the SetIdentifier field's value.

func (*ResourceRecordSet) SetTTL

SetTTL sets the TTL field's value.

func (*ResourceRecordSet) SetTrafficPolicyInstanceId

func (s *ResourceRecordSet) SetTrafficPolicyInstanceId(v string) *ResourceRecordSet

SetTrafficPolicyInstanceId sets the TrafficPolicyInstanceId field's value.

func (*ResourceRecordSet) SetType

SetType sets the Type field's value.

func (*ResourceRecordSet) SetWeight

func (s *ResourceRecordSet) SetWeight(v int64) *ResourceRecordSet

SetWeight sets the Weight field's value.

func (ResourceRecordSet) String

func (s ResourceRecordSet) String() string

String returns the string representation

func (*ResourceRecordSet) Validate

func (s *ResourceRecordSet) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ResourceTagSet

type ResourceTagSet struct {

	// The ID for the specified resource.
	ResourceId *string `type:"string"`

	// The type of the resource.
	//
	//    * The resource type for health checks is healthcheck.
	//
	//    * The resource type for hosted zones is hostedzone.
	ResourceType *string `type:"string" enum:"TagResourceType"`

	// The tags associated with the specified resource.
	Tags []*Tag `locationNameList:"Tag" min:"1" type:"list"`
	// contains filtered or unexported fields
}

A complex type containing a resource and its associated tags. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ResourceTagSet

func (ResourceTagSet) GoString

func (s ResourceTagSet) GoString() string

GoString returns the string representation

func (*ResourceTagSet) MarshalFields

func (s *ResourceTagSet) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*ResourceTagSet) SetResourceId

func (s *ResourceTagSet) SetResourceId(v string) *ResourceTagSet

SetResourceId sets the ResourceId field's value.

func (*ResourceTagSet) SetResourceType

func (s *ResourceTagSet) SetResourceType(v string) *ResourceTagSet

SetResourceType sets the ResourceType field's value.

func (*ResourceTagSet) SetTags

func (s *ResourceTagSet) SetTags(v []*Tag) *ResourceTagSet

SetTags sets the Tags field's value.

func (ResourceTagSet) String

func (s ResourceTagSet) String() string

String returns the string representation

type Route53

type Route53 struct {
	*client.Client
}

Route53 provides the API operation methods for making requests to Amazon Route 53. See this package's package overview docs for details on the service.

Route53 methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

func New

func New(p client.ConfigProvider, cfgs ...*aws.Config) *Route53

New creates a new instance of the Route53 client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a Route53 client from just a session.
svc := route53.New(mySession)

// Create a Route53 client with additional configuration
svc := route53.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*Route53) AssociateVPCWithHostedZone

func (c *Route53) AssociateVPCWithHostedZone(input *AssociateVPCWithHostedZoneInput) (*AssociateVPCWithHostedZoneOutput, error)

AssociateVPCWithHostedZone API operation for Amazon Route 53.

Associates an Amazon VPC with a private hosted zone.

To perform the association, the VPC and the private hosted zone must already exist. You can't convert a public hosted zone into a private hosted zone.

If you want to associate a VPC that was created by using one AWS account with a private hosted zone that was created by using a different account, the AWS account that created the private hosted zone must first submit a CreateVPCAssociationAuthorization request. Then the account that created the VPC must submit an AssociateVPCWithHostedZone request.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation AssociateVPCWithHostedZone for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeNotAuthorizedException "NotAuthorizedException" Associating the specified VPC with the specified hosted zone has not been authorized.

  • ErrCodeInvalidVPCId "InvalidVPCId" The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodePublicZoneVPCAssociation "PublicZoneVPCAssociation" You're trying to associate a VPC with a public hosted zone. Amazon Route 53 doesn't support associating a VPC with a public hosted zone.

  • ErrCodeConflictingDomainExists "ConflictingDomainExists" The cause of this error depends on whether you're trying to create a public or a private hosted zone:

  • Public hosted zone: Two hosted zones that have the same name or that have a parent/child relationship (example.com and test.example.com) can't have any common name servers. You tried to create a hosted zone that has the same name as an existing hosted zone or that's the parent or child of an existing hosted zone, and you specified a delegation set that shares one or more name servers with the existing hosted zone.

  • Private hosted zone: You specified an Amazon VPC that you're already using for another hosted zone, and the domain that you specified for one of the hosted zones is a subdomain of the domain that you specified for the other hosted zone. For example, you can't use the same Amazon VPC for the hosted zones for example.com and test.example.com.

  • ErrCodeLimitsExceeded "LimitsExceeded" The limits specified for a resource have been exceeded.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/AssociateVPCWithHostedZone

Example (Shared00)

To associate a VPC with a hosted zone

The following example associates the VPC with ID vpc-1a2b3c4d with the hosted zone with ID Z3M3LMPEXAMPLE.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.AssociateVPCWithHostedZoneInput{
		Comment:      aws.String(""),
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
		VPC: &route53.VPC{
			VPCId:     aws.String("vpc-1a2b3c4d"),
			VPCRegion: aws.String("us-east-2"),
		},
	}

	result, err := svc.AssociateVPCWithHostedZone(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNotAuthorizedException:
				fmt.Println(route53.ErrCodeNotAuthorizedException, aerr.Error())
			case route53.ErrCodeInvalidVPCId:
				fmt.Println(route53.ErrCodeInvalidVPCId, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePublicZoneVPCAssociation:
				fmt.Println(route53.ErrCodePublicZoneVPCAssociation, aerr.Error())
			case route53.ErrCodeConflictingDomainExists:
				fmt.Println(route53.ErrCodeConflictingDomainExists, aerr.Error())
			case route53.ErrCodeLimitsExceeded:
				fmt.Println(route53.ErrCodeLimitsExceeded, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*Route53) AssociateVPCWithHostedZoneRequest

func (c *Route53) AssociateVPCWithHostedZoneRequest(input *AssociateVPCWithHostedZoneInput) (req *request.Request, output *AssociateVPCWithHostedZoneOutput)

AssociateVPCWithHostedZoneRequest generates a "aws/request.Request" representing the client's request for the AssociateVPCWithHostedZone operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AssociateVPCWithHostedZone for more information on using the AssociateVPCWithHostedZone API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AssociateVPCWithHostedZoneRequest method.
req, resp := client.AssociateVPCWithHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/AssociateVPCWithHostedZone

func (*Route53) AssociateVPCWithHostedZoneWithContext

func (c *Route53) AssociateVPCWithHostedZoneWithContext(ctx aws.Context, input *AssociateVPCWithHostedZoneInput, opts ...request.Option) (*AssociateVPCWithHostedZoneOutput, error)

AssociateVPCWithHostedZoneWithContext is the same as AssociateVPCWithHostedZone with the addition of the ability to pass a context and additional request options.

See AssociateVPCWithHostedZone for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ChangeResourceRecordSets

func (c *Route53) ChangeResourceRecordSets(input *ChangeResourceRecordSetsInput) (*ChangeResourceRecordSetsOutput, error)

ChangeResourceRecordSets API operation for Amazon Route 53.

Creates, changes, or deletes a resource record set, which contains authoritative DNS information for a specified domain name or subdomain name. For example, you can use ChangeResourceRecordSets to create a resource record set that routes traffic for test.example.com to a web server that has an IP address of 192.0.2.44.

Change Batches and Transactional Changes

The request body must include a document with a ChangeResourceRecordSetsRequest element. The request body contains a list of change items, known as a change batch. Change batches are considered transactional changes. When using the Amazon Route 53 API to change resource record sets, Amazon Route 53 either makes all or none of the changes in a change batch request. This ensures that Amazon Route 53 never partially implements the intended changes to the resource record sets in a hosted zone.

For example, a change batch request that deletes the CNAME record for www.example.com and creates an alias resource record set for www.example.com. Amazon Route 53 deletes the first resource record set and creates the second resource record set in a single operation. If either the DELETE or the CREATE action fails, then both changes (plus any other changes in the batch) fail, and the original CNAME record continues to exist.

Due to the nature of transactional changes, you can't delete the same resource record set more than once in a single change batch. If you attempt to delete the same change batch more than once, Amazon Route 53 returns an InvalidChangeBatch error.

Traffic Flow

To create resource record sets for complex routing configurations, use either the traffic flow visual editor in the Amazon Route 53 console or the API actions for traffic policies and traffic policy instances. Save the configuration as a traffic policy, then associate the traffic policy with one or more domain names (such as example.com) or subdomain names (such as www.example.com), in the same hosted zone or in multiple hosted zones. You can roll back the updates if the new configuration isn't performing as expected. For more information, see Using Traffic Flow to Route DNS Traffic (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/traffic-flow.html) in the Amazon Route 53 Developer Guide.

Create, Delete, and Upsert

Use ChangeResourceRecordsSetsRequest to perform the following actions:

  • CREATE: Creates a resource record set that has the specified values.

  • DELETE: Deletes an existing resource record set that has the specified values.

  • UPSERT: If a resource record set does not already exist, AWS creates it. If a resource set does exist, Amazon Route 53 updates it with the values in the request.

Syntaxes for Creating, Updating, and Deleting Resource Record Sets

The syntax for a request depends on the type of resource record set that you want to create, delete, or update, such as weighted, alias, or failover. The XML elements in your request must appear in the order listed in the syntax.

For an example for each type of resource record set, see "Examples."

Don't refer to the syntax in the "Parameter Syntax" section, which includes all of the elements for every kind of resource record set that you can create, delete, or update by using ChangeResourceRecordSets.

Change Propagation to Amazon Route 53 DNS Servers

When you submit a ChangeResourceRecordSets request, Amazon Route 53 propagates your changes to all of the Amazon Route 53 authoritative DNS servers. While your changes are propagating, GetChange returns a status of PENDING. When propagation is complete, GetChange returns a status of INSYNC. Changes generally propagate to all Amazon Route 53 name servers within 60 seconds. For more information, see GetChange.

Limits on ChangeResourceRecordSets Requests

For information about the limits on a ChangeResourceRecordSets request, see Limits (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DNSLimitations.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ChangeResourceRecordSets for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeInvalidChangeBatch "InvalidChangeBatch" This exception contains a list of messages that might contain one or more error messages. Each error message indicates one error in the change batch.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodePriorRequestNotComplete "PriorRequestNotComplete" If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeResourceRecordSets

Example (Shared00)

To create a basic resource record set

The following example creates a resource record set that routes Internet traffic to a resource with an IP address of 192.0.2.44.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("Web server for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared01)

To create weighted resource record sets

The following example creates two weighted resource record sets. The resource with a Weight of 100 will get 1/3rd of traffic (100/100+200), and the other resource will get the rest of the traffic for example.com.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("Web servers for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared02)

To create an alias resource record set

The following example creates an alias resource record set that routes traffic to a CloudFront distribution.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("CloudFront distribution for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared03)

To create weighted alias resource record sets

The following example creates two weighted alias resource record sets that route traffic to ELB load balancers. The resource with a Weight of 100 will get 1/3rd of traffic (100/100+200), and the other resource will get the rest of the traffic for example.com.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("ELB load balancers for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared04)

To create latency resource record sets

The following example creates two latency resource record sets that route traffic to EC2 instances. Traffic for example.com is routed either to the Ohio region or the Oregon region, depending on the latency between the user and those regions.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("EC2 instances for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared05)

To create latency alias resource record sets

The following example creates two latency alias resource record sets that route traffic for example.com to ELB load balancers. Requests are routed either to the Ohio region or the Oregon region, depending on the latency between the user and those regions.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("ELB load balancers for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared06)

To create failover resource record sets

The following example creates primary and secondary failover resource record sets that route traffic to EC2 instances. Traffic is generally routed to the primary resource, in the Ohio region. If that resource is unavailable, traffic is routed to the secondary resource, in the Oregon region.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("Failover configuration for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared07)

To create failover alias resource record sets

The following example creates primary and secondary failover alias resource record sets that route traffic to ELB load balancers. Traffic is generally routed to the primary resource, in the Ohio region. If that resource is unavailable, traffic is routed to the secondary resource, in the Oregon region.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("Failover alias configuration for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared08)

To create geolocation resource record sets

The following example creates four geolocation resource record sets that use IPv4 addresses to route traffic to resources such as web servers running on EC2 instances. Traffic is routed to one of four IP addresses, for North America (NA), for South America (SA), for Europe (EU), and for all other locations (*).

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("Geolocation configuration for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

Example (Shared09)

To create geolocation alias resource record sets

The following example creates four geolocation alias resource record sets that route traffic to ELB load balancers. Traffic is routed to one of four IP addresses, for North America (NA), for South America (SA), for Europe (EU), and for all other locations (*).

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeResourceRecordSetsInput{
		ChangeBatch: &route53.ChangeBatch{
			Changes: []*route53.Change{
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
				{
					Action: aws.String("CREATE"),
				},
			},
			Comment: aws.String("Geolocation alias configuration for example.com"),
		},
		HostedZoneId: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.ChangeResourceRecordSets(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeInvalidChangeBatch:
				fmt.Println(route53.ErrCodeInvalidChangeBatch, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*Route53) ChangeResourceRecordSetsRequest

func (c *Route53) ChangeResourceRecordSetsRequest(input *ChangeResourceRecordSetsInput) (req *request.Request, output *ChangeResourceRecordSetsOutput)

ChangeResourceRecordSetsRequest generates a "aws/request.Request" representing the client's request for the ChangeResourceRecordSets operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ChangeResourceRecordSets for more information on using the ChangeResourceRecordSets API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ChangeResourceRecordSetsRequest method.
req, resp := client.ChangeResourceRecordSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeResourceRecordSets

func (*Route53) ChangeResourceRecordSetsWithContext

func (c *Route53) ChangeResourceRecordSetsWithContext(ctx aws.Context, input *ChangeResourceRecordSetsInput, opts ...request.Option) (*ChangeResourceRecordSetsOutput, error)

ChangeResourceRecordSetsWithContext is the same as ChangeResourceRecordSets with the addition of the ability to pass a context and additional request options.

See ChangeResourceRecordSets for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ChangeTagsForResource

func (c *Route53) ChangeTagsForResource(input *ChangeTagsForResourceInput) (*ChangeTagsForResourceOutput, error)

ChangeTagsForResource API operation for Amazon Route 53.

Adds, edits, or deletes tags for a health check or a hosted zone.

For information about using tags for cost allocation, see Using Cost Allocation Tags (http://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html) in the AWS Billing and Cost Management User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ChangeTagsForResource for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodePriorRequestNotComplete "PriorRequestNotComplete" If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

  • ErrCodeThrottlingException "ThrottlingException" The limit on the number of requests per second was exceeded.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeTagsForResource

Example (Shared00)

To add or remove tags from a hosted zone or health check

The following example adds two tags and removes one tag from the hosted zone with ID Z3M3LMPEXAMPLE.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.ChangeTagsForResourceInput{
		AddTags: []*route53.Tag{
			{
				Key:   aws.String("apex"),
				Value: aws.String("3874"),
			},
			{
				Key:   aws.String("acme"),
				Value: aws.String("4938"),
			},
		},
		RemoveTagKeys: []*string{
			aws.String("Nadir"),
		},
		ResourceId:   aws.String("Z3M3LMPEXAMPLE"),
		ResourceType: aws.String("hostedzone"),
	}

	result, err := svc.ChangeTagsForResource(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			case route53.ErrCodeNoSuchHealthCheck:
				fmt.Println(route53.ErrCodeNoSuchHealthCheck, aerr.Error())
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodePriorRequestNotComplete:
				fmt.Println(route53.ErrCodePriorRequestNotComplete, aerr.Error())
			case route53.ErrCodeThrottlingException:
				fmt.Println(route53.ErrCodeThrottlingException, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*Route53) ChangeTagsForResourceRequest

func (c *Route53) ChangeTagsForResourceRequest(input *ChangeTagsForResourceInput) (req *request.Request, output *ChangeTagsForResourceOutput)

ChangeTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ChangeTagsForResource operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ChangeTagsForResource for more information on using the ChangeTagsForResource API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ChangeTagsForResourceRequest method.
req, resp := client.ChangeTagsForResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ChangeTagsForResource

func (*Route53) ChangeTagsForResourceWithContext

func (c *Route53) ChangeTagsForResourceWithContext(ctx aws.Context, input *ChangeTagsForResourceInput, opts ...request.Option) (*ChangeTagsForResourceOutput, error)

ChangeTagsForResourceWithContext is the same as ChangeTagsForResource with the addition of the ability to pass a context and additional request options.

See ChangeTagsForResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) CreateHealthCheck

func (c *Route53) CreateHealthCheck(input *CreateHealthCheckInput) (*CreateHealthCheckOutput, error)

CreateHealthCheck API operation for Amazon Route 53.

Creates a new health check.

For information about adding health checks to resource record sets, see ResourceRecordSet$HealthCheckId in ChangeResourceRecordSets.

ELB Load Balancers

If you're registering EC2 instances with an Elastic Load Balancing (ELB) load balancer, do not create Amazon Route 53 health checks for the EC2 instances. When you register an EC2 instance with a load balancer, you configure settings for an ELB health check, which performs a similar function to an Amazon Route 53 health check.

Private Hosted Zones

You can associate health checks with failover resource record sets in a private hosted zone. Note the following:

  • Amazon Route 53 health checkers are outside the VPC. To check the health of an endpoint within a VPC by IP address, you must assign a public IP address to the instance in the VPC.

  • You can configure a health checker to check the health of an external resource that the instance relies on, such as a database server.

  • You can create a CloudWatch metric, associate an alarm with the metric, and then create a health check that is based on the state of the alarm. For example, you might create a CloudWatch metric that checks the status of the Amazon EC2 StatusCheckFailed metric, add an alarm to the metric, and then create a health check that is based on the state of the alarm. For information about creating CloudWatch metrics and alarms by using the CloudWatch console, see the Amazon CloudWatch User Guide (http://docs.aws.amazon.com/AmazonCloudWatch/latest/DeveloperGuide/WhatIsCloudWatch.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateHealthCheck for usage and error information.

Returned Error Codes:

  • ErrCodeTooManyHealthChecks "TooManyHealthChecks" You have reached the maximum number of active health checks for an AWS account. The default limit is 100. To request a higher limit, create a case (http://aws.amazon.com/route53-request) with the AWS Support Center.

  • ErrCodeHealthCheckAlreadyExists "HealthCheckAlreadyExists" The health check you're attempting to create already exists. Amazon Route 53 returns this error when you submit a request that has the following values:

  • The same value for CallerReference as an existing health check, and one or more values that differ from the existing health check that has the same caller reference.

  • The same value for CallerReference as a health check that you created and later deleted, regardless of the other settings in the request.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateHealthCheck

func (*Route53) CreateHealthCheckRequest

func (c *Route53) CreateHealthCheckRequest(input *CreateHealthCheckInput) (req *request.Request, output *CreateHealthCheckOutput)

CreateHealthCheckRequest generates a "aws/request.Request" representing the client's request for the CreateHealthCheck operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateHealthCheck for more information on using the CreateHealthCheck API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateHealthCheckRequest method.
req, resp := client.CreateHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateHealthCheck

func (*Route53) CreateHealthCheckWithContext

func (c *Route53) CreateHealthCheckWithContext(ctx aws.Context, input *CreateHealthCheckInput, opts ...request.Option) (*CreateHealthCheckOutput, error)

CreateHealthCheckWithContext is the same as CreateHealthCheck with the addition of the ability to pass a context and additional request options.

See CreateHealthCheck for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) CreateHostedZone

func (c *Route53) CreateHostedZone(input *CreateHostedZoneInput) (*CreateHostedZoneOutput, error)

CreateHostedZone API operation for Amazon Route 53.

Creates a new public hosted zone, which you use to specify how the Domain Name System (DNS) routes traffic on the Internet for a domain, such as example.com, and its subdomains.

You can't convert a public hosted zones to a private hosted zone or vice versa. Instead, you must create a new hosted zone with the same name and create new resource record sets.

For more information about charges for hosted zones, see Amazon Route 53 Pricing (http://aws.amazon.com/route53/pricing/).

Note the following:

  • You can't create a hosted zone for a top-level domain (TLD).

  • Amazon Route 53 automatically creates a default SOA record and four NS records for the zone. For more information about SOA and NS records, see NS and SOA Records that Amazon Route 53 Creates for a Hosted Zone (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/SOA-NSrecords.html) in the Amazon Route 53 Developer Guide.

If you want to use the same name servers for multiple hosted zones, you can

optionally associate a reusable delegation set with the hosted zone. See
the DelegationSetId element.

* If your domain is registered with a registrar other than Amazon Route
53, you must update the name servers with your registrar to make Amazon
Route 53 your DNS service. For more information, see Configuring Amazon
Route 53 as your DNS Service (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/creating-migrating.html)
in the Amazon Route 53 Developer Guide.

When you submit a CreateHostedZone request, the initial status of the hosted zone is PENDING. This means that the NS and SOA records are not yet available on all Amazon Route 53 DNS servers. When the NS and SOA records are available, the status of the zone changes to INSYNC.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateHostedZone for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidDomainName "InvalidDomainName" The specified domain name is not valid.

  • ErrCodeHostedZoneAlreadyExists "HostedZoneAlreadyExists" The hosted zone you're trying to create already exists. Amazon Route 53 returns this error when a hosted zone has already been created with the specified CallerReference.

  • ErrCodeTooManyHostedZones "TooManyHostedZones" This hosted zone can't be created because the hosted zone limit is exceeded. To request a limit increase, go to the Amazon Route 53 Contact Us (http://aws.amazon.com/route53-request/) page.

  • ErrCodeInvalidVPCId "InvalidVPCId" The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeDelegationSetNotAvailable "DelegationSetNotAvailable" You can create a hosted zone that has the same name as an existing hosted zone (example.com is common), but there is a limit to the number of hosted zones that have the same name. If you get this error, Amazon Route 53 has reached that limit. If you own the domain name and Amazon Route 53 generates this error, contact Customer Support.

  • ErrCodeConflictingDomainExists "ConflictingDomainExists" The cause of this error depends on whether you're trying to create a public or a private hosted zone:

  • Public hosted zone: Two hosted zones that have the same name or that have a parent/child relationship (example.com and test.example.com) can't have any common name servers. You tried to create a hosted zone that has the same name as an existing hosted zone or that's the parent or child of an existing hosted zone, and you specified a delegation set that shares one or more name servers with the existing hosted zone.

  • Private hosted zone: You specified an Amazon VPC that you're already using for another hosted zone, and the domain that you specified for one of the hosted zones is a subdomain of the domain that you specified for the other hosted zone. For example, you can't use the same Amazon VPC for the hosted zones for example.com and test.example.com.

  • ErrCodeNoSuchDelegationSet "NoSuchDelegationSet" A reusable delegation set with the specified ID does not exist.

  • ErrCodeDelegationSetNotReusable "DelegationSetNotReusable" A reusable delegation set with the specified ID does not exist.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateHostedZone

func (*Route53) CreateHostedZoneRequest

func (c *Route53) CreateHostedZoneRequest(input *CreateHostedZoneInput) (req *request.Request, output *CreateHostedZoneOutput)

CreateHostedZoneRequest generates a "aws/request.Request" representing the client's request for the CreateHostedZone operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateHostedZone for more information on using the CreateHostedZone API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateHostedZoneRequest method.
req, resp := client.CreateHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateHostedZone

func (*Route53) CreateHostedZoneWithContext

func (c *Route53) CreateHostedZoneWithContext(ctx aws.Context, input *CreateHostedZoneInput, opts ...request.Option) (*CreateHostedZoneOutput, error)

CreateHostedZoneWithContext is the same as CreateHostedZone with the addition of the ability to pass a context and additional request options.

See CreateHostedZone for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) CreateQueryLoggingConfig

func (c *Route53) CreateQueryLoggingConfig(input *CreateQueryLoggingConfigInput) (*CreateQueryLoggingConfigOutput, error)

CreateQueryLoggingConfig API operation for Amazon Route 53.

Creates a configuration for DNS query logging. After you create a query logging configuration, Amazon Route 53 begins to publish log data to an Amazon CloudWatch Logs log group.

DNS query logs contain information about the queries that Amazon Route 53 receives for a specified public hosted zone, such as the following:

  • Amazon Route 53 edge location that responded to the DNS query

  • Domain or subdomain that was requested

  • DNS record type, such as A or AAAA

  • DNS response code, such as NoError or ServFail

Log Group and Resource PolicyBefore you create a query logging configuration, perform the following operations.

If you create a query logging configuration using the Amazon Route 53 console, Amazon Route 53 performs these operations automatically.

Create a CloudWatch Logs log group, and make note of the ARN, which you specify when you create a query logging configuration. Note the following:

You must create the log group in the us-east-1 region.

You must use the same AWS account to create the log group and the hosted zone that you want to configure query logging for.

When you create log groups for query logging, we recommend that you use a consistent prefix, for example:

/aws/route53/hosted zone name

In the next step, you'll create a resource policy, which controls access to one or more log groups and the associated AWS resources, such as Amazon Route 53 hosted zones. There's a limit on the number of resource policies that you can create, so we recommend that you use a consistent prefix so you can use the same resource policy for all the log groups that you create for query logging.

Create a CloudWatch Logs resource policy, and give it the permissions that Amazon Route 53 needs to create log streams and to to send query logs to log streams. For the value of Resource, specify the ARN for the log group that you created in the previous step. To use the same resource policy for all the CloudWatch Logs log groups that you created for query logging configurations, replace the hosted zone name with *, for example:

arn:aws:logs:us-east-1:123412341234:log-group:/aws/route53/*

You can't use the CloudWatch console to create or edit a resource policy. You must use the CloudWatch API, one of the AWS SDKs, or the AWS CLI.

Log Streams and Edge LocationsWhen Amazon Route 53 finishes creating the configuration for DNS query logging, it does the following:

Creates a log stream for an edge location the first time that the edge location responds to DNS queries for the specified hosted zone. That log stream is used to log all queries that Amazon Route 53 responds to for that edge location.

Begins to send query logs to the applicable log stream.

The name of each log stream is in the following format:

hosted zone ID/edge location code

The edge location code is a three-letter code and an arbitrarily assigned number, for example, DFW3. The three-letter code typically corresponds with the International Air Transport Association airport code for an airport near the edge location. (These abbreviations might change in the future.) For a list of edge locations, see "The Amazon Route 53 Global Network" on the Amazon Route 53 Product Details (http://aws.amazon.com/route53/details/) page.

Queries That Are LoggedQuery logs contain only the queries that DNS resolvers forward to Amazon Route 53. If a DNS resolver has already cached the response to a query (such as the IP address for a load balancer for example.com), the resolver will continue to return the cached response. It doesn't forward another query to Amazon Route 53 until the TTL for the corresponding resource record set expires. Depending on how many DNS queries are submitted for a resource record set, and depending on the TTL for that resource record set, query logs might contain information about only one query out of every several thousand queries that are submitted to DNS. For more information about how DNS works, see Routing Internet Traffic to Your Website or Web Application (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/welcome-dns-service.html) in the Amazon Route 53 Developer Guide.

Log File FormatFor a list of the values in each query log and the format of each value, see Logging DNS Queries (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html) in the Amazon Route 53 Developer Guide.

PricingFor information about charges for query logs, see Amazon CloudWatch Pricing (http://aws.amazon.com/cloudwatch/pricing/).

How to Stop LoggingIf you want Amazon Route 53 to stop sending query logs to CloudWatch Logs, delete the query logging configuration. For more information, see DeleteQueryLoggingConfig.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateQueryLoggingConfig for usage and error information.

Returned Error Codes:

  • ErrCodeConcurrentModification "ConcurrentModification" Another user submitted a request to create, update, or delete the object at the same time that you did. Retry the request.

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeNoSuchCloudWatchLogsLogGroup "NoSuchCloudWatchLogsLogGroup" There is no CloudWatch Logs log group with the specified ARN.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeQueryLoggingConfigAlreadyExists "QueryLoggingConfigAlreadyExists" You can create only one query logging configuration for a hosted zone, and a query logging configuration already exists for this hosted zone.

  • ErrCodeInsufficientCloudWatchLogsResourcePolicy "InsufficientCloudWatchLogsResourcePolicy" Amazon Route 53 doesn't have the permissions required to create log streams and send query logs to log streams. Possible causes include the following:

  • There is no resource policy that specifies the log group ARN in the value for Resource.

  • The resource policy that includes the log group ARN in the value for Resource doesn't have the necessary permissions.

  • The resource policy hasn't finished propagating yet.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateQueryLoggingConfig

func (*Route53) CreateQueryLoggingConfigRequest

func (c *Route53) CreateQueryLoggingConfigRequest(input *CreateQueryLoggingConfigInput) (req *request.Request, output *CreateQueryLoggingConfigOutput)

CreateQueryLoggingConfigRequest generates a "aws/request.Request" representing the client's request for the CreateQueryLoggingConfig operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateQueryLoggingConfig for more information on using the CreateQueryLoggingConfig API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateQueryLoggingConfigRequest method.
req, resp := client.CreateQueryLoggingConfigRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateQueryLoggingConfig

func (*Route53) CreateQueryLoggingConfigWithContext

func (c *Route53) CreateQueryLoggingConfigWithContext(ctx aws.Context, input *CreateQueryLoggingConfigInput, opts ...request.Option) (*CreateQueryLoggingConfigOutput, error)

CreateQueryLoggingConfigWithContext is the same as CreateQueryLoggingConfig with the addition of the ability to pass a context and additional request options.

See CreateQueryLoggingConfig for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) CreateReusableDelegationSet

func (c *Route53) CreateReusableDelegationSet(input *CreateReusableDelegationSetInput) (*CreateReusableDelegationSetOutput, error)

CreateReusableDelegationSet API operation for Amazon Route 53.

Creates a delegation set (a group of four name servers) that can be reused by multiple hosted zones. If a hosted zoned ID is specified, CreateReusableDelegationSet marks the delegation set associated with that zone as reusable

A reusable delegation set can't be associated with a private hosted zone.

For information on how to use a reusable delegation set to configure white label name servers, see Configuring White Label Name Servers (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/white-label-name-servers.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateReusableDelegationSet for usage and error information.

Returned Error Codes:

  • ErrCodeDelegationSetAlreadyCreated "DelegationSetAlreadyCreated" A delegation set with the same owner and caller reference combination has already been created.

  • ErrCodeLimitsExceeded "LimitsExceeded" The limits specified for a resource have been exceeded.

  • ErrCodeHostedZoneNotFound "HostedZoneNotFound" The specified HostedZone can't be found.

  • ErrCodeInvalidArgument "InvalidArgument" Parameter name is invalid.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeDelegationSetNotAvailable "DelegationSetNotAvailable" You can create a hosted zone that has the same name as an existing hosted zone (example.com is common), but there is a limit to the number of hosted zones that have the same name. If you get this error, Amazon Route 53 has reached that limit. If you own the domain name and Amazon Route 53 generates this error, contact Customer Support.

  • ErrCodeDelegationSetAlreadyReusable "DelegationSetAlreadyReusable" The specified delegation set has already been marked as reusable.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateReusableDelegationSet

func (*Route53) CreateReusableDelegationSetRequest

func (c *Route53) CreateReusableDelegationSetRequest(input *CreateReusableDelegationSetInput) (req *request.Request, output *CreateReusableDelegationSetOutput)

CreateReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the CreateReusableDelegationSet operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateReusableDelegationSet for more information on using the CreateReusableDelegationSet API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateReusableDelegationSetRequest method.
req, resp := client.CreateReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateReusableDelegationSet

func (*Route53) CreateReusableDelegationSetWithContext

func (c *Route53) CreateReusableDelegationSetWithContext(ctx aws.Context, input *CreateReusableDelegationSetInput, opts ...request.Option) (*CreateReusableDelegationSetOutput, error)

CreateReusableDelegationSetWithContext is the same as CreateReusableDelegationSet with the addition of the ability to pass a context and additional request options.

See CreateReusableDelegationSet for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) CreateTrafficPolicy

func (c *Route53) CreateTrafficPolicy(input *CreateTrafficPolicyInput) (*CreateTrafficPolicyOutput, error)

CreateTrafficPolicy API operation for Amazon Route 53.

Creates a traffic policy, which you use to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateTrafficPolicy for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeTooManyTrafficPolicies "TooManyTrafficPolicies" You've created the maximum number of traffic policies that can be created for the current AWS account. You can request an increase to the limit on the Contact Us (http://aws.amazon.com/route53-request/) page.

  • ErrCodeTrafficPolicyAlreadyExists "TrafficPolicyAlreadyExists" A traffic policy that has the same value for Name already exists.

  • ErrCodeInvalidTrafficPolicyDocument "InvalidTrafficPolicyDocument" The format of the traffic policy document that you specified in the Document element is invalid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicy

func (*Route53) CreateTrafficPolicyInstance

func (c *Route53) CreateTrafficPolicyInstance(input *CreateTrafficPolicyInstanceInput) (*CreateTrafficPolicyInstanceOutput, error)

CreateTrafficPolicyInstance API operation for Amazon Route 53.

Creates resource record sets in a specified hosted zone based on the settings in a specified traffic policy version. In addition, CreateTrafficPolicyInstance associates the resource record sets with a specified domain name (such as example.com) or subdomain name (such as www.example.com). Amazon Route 53 responds to DNS queries for the domain or subdomain name by using the resource record sets that CreateTrafficPolicyInstance created.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateTrafficPolicyInstance for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeTooManyTrafficPolicyInstances "TooManyTrafficPolicyInstances" You've created the maximum number of traffic policy instances that can be created for the current AWS account. You can request an increase to the limit on the Contact Us (http://aws.amazon.com/route53-request/) page.

  • ErrCodeNoSuchTrafficPolicy "NoSuchTrafficPolicy" No traffic policy exists with the specified ID.

  • ErrCodeTrafficPolicyInstanceAlreadyExists "TrafficPolicyInstanceAlreadyExists" There is already a traffic policy instance with the specified ID.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyInstance

func (*Route53) CreateTrafficPolicyInstanceRequest

func (c *Route53) CreateTrafficPolicyInstanceRequest(input *CreateTrafficPolicyInstanceInput) (req *request.Request, output *CreateTrafficPolicyInstanceOutput)

CreateTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicyInstance operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateTrafficPolicyInstance for more information on using the CreateTrafficPolicyInstance API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateTrafficPolicyInstanceRequest method.
req, resp := client.CreateTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyInstance

func (*Route53) CreateTrafficPolicyInstanceWithContext

func (c *Route53) CreateTrafficPolicyInstanceWithContext(ctx aws.Context, input *CreateTrafficPolicyInstanceInput, opts ...request.Option) (*CreateTrafficPolicyInstanceOutput, error)

CreateTrafficPolicyInstanceWithContext is the same as CreateTrafficPolicyInstance with the addition of the ability to pass a context and additional request options.

See CreateTrafficPolicyInstance for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) CreateTrafficPolicyRequest

func (c *Route53) CreateTrafficPolicyRequest(input *CreateTrafficPolicyInput) (req *request.Request, output *CreateTrafficPolicyOutput)

CreateTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicy operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateTrafficPolicy for more information on using the CreateTrafficPolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateTrafficPolicyRequest method.
req, resp := client.CreateTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicy

func (*Route53) CreateTrafficPolicyVersion

func (c *Route53) CreateTrafficPolicyVersion(input *CreateTrafficPolicyVersionInput) (*CreateTrafficPolicyVersionOutput, error)

CreateTrafficPolicyVersion API operation for Amazon Route 53.

Creates a new version of an existing traffic policy. When you create a new version of a traffic policy, you specify the ID of the traffic policy that you want to update and a JSON-formatted document that describes the new version. You use traffic policies to create multiple DNS resource record sets for one domain name (such as example.com) or one subdomain name (such as www.example.com). You can create a maximum of 1000 versions of a traffic policy. If you reach the limit and need to create another version, you'll need to start a new traffic policy.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateTrafficPolicyVersion for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchTrafficPolicy "NoSuchTrafficPolicy" No traffic policy exists with the specified ID.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeConcurrentModification "ConcurrentModification" Another user submitted a request to create, update, or delete the object at the same time that you did. Retry the request.

  • ErrCodeInvalidTrafficPolicyDocument "InvalidTrafficPolicyDocument" The format of the traffic policy document that you specified in the Document element is invalid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyVersion

func (*Route53) CreateTrafficPolicyVersionRequest

func (c *Route53) CreateTrafficPolicyVersionRequest(input *CreateTrafficPolicyVersionInput) (req *request.Request, output *CreateTrafficPolicyVersionOutput)

CreateTrafficPolicyVersionRequest generates a "aws/request.Request" representing the client's request for the CreateTrafficPolicyVersion operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateTrafficPolicyVersion for more information on using the CreateTrafficPolicyVersion API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateTrafficPolicyVersionRequest method.
req, resp := client.CreateTrafficPolicyVersionRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateTrafficPolicyVersion

func (*Route53) CreateTrafficPolicyVersionWithContext

func (c *Route53) CreateTrafficPolicyVersionWithContext(ctx aws.Context, input *CreateTrafficPolicyVersionInput, opts ...request.Option) (*CreateTrafficPolicyVersionOutput, error)

CreateTrafficPolicyVersionWithContext is the same as CreateTrafficPolicyVersion with the addition of the ability to pass a context and additional request options.

See CreateTrafficPolicyVersion for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) CreateTrafficPolicyWithContext

func (c *Route53) CreateTrafficPolicyWithContext(ctx aws.Context, input *CreateTrafficPolicyInput, opts ...request.Option) (*CreateTrafficPolicyOutput, error)

CreateTrafficPolicyWithContext is the same as CreateTrafficPolicy with the addition of the ability to pass a context and additional request options.

See CreateTrafficPolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) CreateVPCAssociationAuthorization

func (c *Route53) CreateVPCAssociationAuthorization(input *CreateVPCAssociationAuthorizationInput) (*CreateVPCAssociationAuthorizationOutput, error)

CreateVPCAssociationAuthorization API operation for Amazon Route 53.

Authorizes the AWS account that created a specified VPC to submit an AssociateVPCWithHostedZone request to associate the VPC with a specified hosted zone that was created by a different account. To submit a CreateVPCAssociationAuthorization request, you must use the account that created the hosted zone. After you authorize the association, use the account that created the VPC to submit an AssociateVPCWithHostedZone request.

If you want to associate multiple VPCs that you created by using one account with a hosted zone that you created by using a different account, you must submit one authorization request for each VPC.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation CreateVPCAssociationAuthorization for usage and error information.

Returned Error Codes:

  • ErrCodeConcurrentModification "ConcurrentModification" Another user submitted a request to create, update, or delete the object at the same time that you did. Retry the request.

  • ErrCodeTooManyVPCAssociationAuthorizations "TooManyVPCAssociationAuthorizations" You've created the maximum number of authorizations that can be created for the specified hosted zone. To authorize another VPC to be associated with the hosted zone, submit a DeleteVPCAssociationAuthorization request to remove an existing authorization. To get a list of existing authorizations, submit a ListVPCAssociationAuthorizations request.

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidVPCId "InvalidVPCId" The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateVPCAssociationAuthorization

func (*Route53) CreateVPCAssociationAuthorizationRequest

func (c *Route53) CreateVPCAssociationAuthorizationRequest(input *CreateVPCAssociationAuthorizationInput) (req *request.Request, output *CreateVPCAssociationAuthorizationOutput)

CreateVPCAssociationAuthorizationRequest generates a "aws/request.Request" representing the client's request for the CreateVPCAssociationAuthorization operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateVPCAssociationAuthorization for more information on using the CreateVPCAssociationAuthorization API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateVPCAssociationAuthorizationRequest method.
req, resp := client.CreateVPCAssociationAuthorizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/CreateVPCAssociationAuthorization

func (*Route53) CreateVPCAssociationAuthorizationWithContext

func (c *Route53) CreateVPCAssociationAuthorizationWithContext(ctx aws.Context, input *CreateVPCAssociationAuthorizationInput, opts ...request.Option) (*CreateVPCAssociationAuthorizationOutput, error)

CreateVPCAssociationAuthorizationWithContext is the same as CreateVPCAssociationAuthorization with the addition of the ability to pass a context and additional request options.

See CreateVPCAssociationAuthorization for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) DeleteHealthCheck

func (c *Route53) DeleteHealthCheck(input *DeleteHealthCheckInput) (*DeleteHealthCheckOutput, error)

DeleteHealthCheck API operation for Amazon Route 53.

Deletes a health check.

Amazon Route 53 does not prevent you from deleting a health check even if the health check is associated with one or more resource record sets. If you delete a health check and you don't update the associated resource record sets, the future status of the health check can't be predicted and may change. This will affect the routing of DNS queries for your DNS failover configuration. For more information, see Replacing and Deleting Health Checks (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-creating-deleting.html#health-checks-deleting.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteHealthCheck for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeHealthCheckInUse "HealthCheckInUse" This error code is not in use.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteHealthCheck

func (*Route53) DeleteHealthCheckRequest

func (c *Route53) DeleteHealthCheckRequest(input *DeleteHealthCheckInput) (req *request.Request, output *DeleteHealthCheckOutput)

DeleteHealthCheckRequest generates a "aws/request.Request" representing the client's request for the DeleteHealthCheck operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteHealthCheck for more information on using the DeleteHealthCheck API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteHealthCheckRequest method.
req, resp := client.DeleteHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteHealthCheck

func (*Route53) DeleteHealthCheckWithContext

func (c *Route53) DeleteHealthCheckWithContext(ctx aws.Context, input *DeleteHealthCheckInput, opts ...request.Option) (*DeleteHealthCheckOutput, error)

DeleteHealthCheckWithContext is the same as DeleteHealthCheck with the addition of the ability to pass a context and additional request options.

See DeleteHealthCheck for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) DeleteHostedZone

func (c *Route53) DeleteHostedZone(input *DeleteHostedZoneInput) (*DeleteHostedZoneOutput, error)

DeleteHostedZone API operation for Amazon Route 53.

Deletes a hosted zone.

If the name servers for the hosted zone are associated with a domain and if you want to make the domain unavailable on the Internet, we recommend that you delete the name servers from the domain to prevent future DNS queries from possibly being misrouted. If the domain is registered with Amazon Route 53, see UpdateDomainNameservers. If the domain is registered with another registrar, use the method provided by the registrar to delete name servers for the domain.

Some domain registries don't allow you to remove all of the name servers for a domain. If the registry for your domain requires one or more name servers, we recommend that you delete the hosted zone only if you transfer DNS service to another service provider, and you replace the name servers for the domain with name servers from the new provider.

You can delete a hosted zone only if it contains only the default SOA record and NS resource record sets. If the hosted zone contains other resource record sets, you must delete them before you can delete the hosted zone. If you try to delete a hosted zone that contains other resource record sets, the request fails, and Amazon Route 53 returns a HostedZoneNotEmpty error. For information about deleting records from your hosted zone, see ChangeResourceRecordSets.

To verify that the hosted zone has been deleted, do one of the following:

  • Use the GetHostedZone action to request information about the hosted zone.

  • Use the ListHostedZones action to get a list of the hosted zones associated with the current AWS account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteHostedZone for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeHostedZoneNotEmpty "HostedZoneNotEmpty" The hosted zone contains resource records that are not SOA or NS records.

  • ErrCodePriorRequestNotComplete "PriorRequestNotComplete" If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeInvalidDomainName "InvalidDomainName" The specified domain name is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteHostedZone

func (*Route53) DeleteHostedZoneRequest

func (c *Route53) DeleteHostedZoneRequest(input *DeleteHostedZoneInput) (req *request.Request, output *DeleteHostedZoneOutput)

DeleteHostedZoneRequest generates a "aws/request.Request" representing the client's request for the DeleteHostedZone operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteHostedZone for more information on using the DeleteHostedZone API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteHostedZoneRequest method.
req, resp := client.DeleteHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteHostedZone

func (*Route53) DeleteHostedZoneWithContext

func (c *Route53) DeleteHostedZoneWithContext(ctx aws.Context, input *DeleteHostedZoneInput, opts ...request.Option) (*DeleteHostedZoneOutput, error)

DeleteHostedZoneWithContext is the same as DeleteHostedZone with the addition of the ability to pass a context and additional request options.

See DeleteHostedZone for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) DeleteQueryLoggingConfig

func (c *Route53) DeleteQueryLoggingConfig(input *DeleteQueryLoggingConfigInput) (*DeleteQueryLoggingConfigOutput, error)

DeleteQueryLoggingConfig API operation for Amazon Route 53.

Deletes a configuration for DNS query logging. If you delete a configuration, Amazon Route 53 stops sending query logs to CloudWatch Logs. Amazon Route 53 doesn't delete any logs that are already in CloudWatch Logs.

For more information about DNS query logs, see CreateQueryLoggingConfig.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteQueryLoggingConfig for usage and error information.

Returned Error Codes:

  • ErrCodeConcurrentModification "ConcurrentModification" Another user submitted a request to create, update, or delete the object at the same time that you did. Retry the request.

  • ErrCodeNoSuchQueryLoggingConfig "NoSuchQueryLoggingConfig" There is no DNS query logging configuration with the specified ID.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteQueryLoggingConfig

func (*Route53) DeleteQueryLoggingConfigRequest

func (c *Route53) DeleteQueryLoggingConfigRequest(input *DeleteQueryLoggingConfigInput) (req *request.Request, output *DeleteQueryLoggingConfigOutput)

DeleteQueryLoggingConfigRequest generates a "aws/request.Request" representing the client's request for the DeleteQueryLoggingConfig operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteQueryLoggingConfig for more information on using the DeleteQueryLoggingConfig API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteQueryLoggingConfigRequest method.
req, resp := client.DeleteQueryLoggingConfigRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteQueryLoggingConfig

func (*Route53) DeleteQueryLoggingConfigWithContext

func (c *Route53) DeleteQueryLoggingConfigWithContext(ctx aws.Context, input *DeleteQueryLoggingConfigInput, opts ...request.Option) (*DeleteQueryLoggingConfigOutput, error)

DeleteQueryLoggingConfigWithContext is the same as DeleteQueryLoggingConfig with the addition of the ability to pass a context and additional request options.

See DeleteQueryLoggingConfig for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) DeleteReusableDelegationSet

func (c *Route53) DeleteReusableDelegationSet(input *DeleteReusableDelegationSetInput) (*DeleteReusableDelegationSetOutput, error)

DeleteReusableDelegationSet API operation for Amazon Route 53.

Deletes a reusable delegation set.

You can delete a reusable delegation set only if it isn't associated with any hosted zones.

To verify that the reusable delegation set is not associated with any hosted zones, submit a GetReusableDelegationSet request and specify the ID of the reusable delegation set that you want to delete.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteReusableDelegationSet for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchDelegationSet "NoSuchDelegationSet" A reusable delegation set with the specified ID does not exist.

  • ErrCodeDelegationSetInUse "DelegationSetInUse" The specified delegation contains associated hosted zones which must be deleted before the reusable delegation set can be deleted.

  • ErrCodeDelegationSetNotReusable "DelegationSetNotReusable" A reusable delegation set with the specified ID does not exist.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteReusableDelegationSet

func (*Route53) DeleteReusableDelegationSetRequest

func (c *Route53) DeleteReusableDelegationSetRequest(input *DeleteReusableDelegationSetInput) (req *request.Request, output *DeleteReusableDelegationSetOutput)

DeleteReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the DeleteReusableDelegationSet operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteReusableDelegationSet for more information on using the DeleteReusableDelegationSet API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteReusableDelegationSetRequest method.
req, resp := client.DeleteReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteReusableDelegationSet

func (*Route53) DeleteReusableDelegationSetWithContext

func (c *Route53) DeleteReusableDelegationSetWithContext(ctx aws.Context, input *DeleteReusableDelegationSetInput, opts ...request.Option) (*DeleteReusableDelegationSetOutput, error)

DeleteReusableDelegationSetWithContext is the same as DeleteReusableDelegationSet with the addition of the ability to pass a context and additional request options.

See DeleteReusableDelegationSet for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) DeleteTrafficPolicy

func (c *Route53) DeleteTrafficPolicy(input *DeleteTrafficPolicyInput) (*DeleteTrafficPolicyOutput, error)

DeleteTrafficPolicy API operation for Amazon Route 53.

Deletes a traffic policy.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteTrafficPolicy for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchTrafficPolicy "NoSuchTrafficPolicy" No traffic policy exists with the specified ID.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeTrafficPolicyInUse "TrafficPolicyInUse" One or more traffic policy instances were created by using the specified traffic policy.

  • ErrCodeConcurrentModification "ConcurrentModification" Another user submitted a request to create, update, or delete the object at the same time that you did. Retry the request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteTrafficPolicy

func (*Route53) DeleteTrafficPolicyInstance

func (c *Route53) DeleteTrafficPolicyInstance(input *DeleteTrafficPolicyInstanceInput) (*DeleteTrafficPolicyInstanceOutput, error)

DeleteTrafficPolicyInstance API operation for Amazon Route 53.

Deletes a traffic policy instance and all of the resource record sets that Amazon Route 53 created when you created the instance.

In the Amazon Route 53 console, traffic policy instances are known as policy records.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteTrafficPolicyInstance for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchTrafficPolicyInstance "NoSuchTrafficPolicyInstance" No traffic policy instance exists with the specified ID.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodePriorRequestNotComplete "PriorRequestNotComplete" If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteTrafficPolicyInstance

func (*Route53) DeleteTrafficPolicyInstanceRequest

func (c *Route53) DeleteTrafficPolicyInstanceRequest(input *DeleteTrafficPolicyInstanceInput) (req *request.Request, output *DeleteTrafficPolicyInstanceOutput)

DeleteTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the DeleteTrafficPolicyInstance operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteTrafficPolicyInstance for more information on using the DeleteTrafficPolicyInstance API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteTrafficPolicyInstanceRequest method.
req, resp := client.DeleteTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteTrafficPolicyInstance

func (*Route53) DeleteTrafficPolicyInstanceWithContext

func (c *Route53) DeleteTrafficPolicyInstanceWithContext(ctx aws.Context, input *DeleteTrafficPolicyInstanceInput, opts ...request.Option) (*DeleteTrafficPolicyInstanceOutput, error)

DeleteTrafficPolicyInstanceWithContext is the same as DeleteTrafficPolicyInstance with the addition of the ability to pass a context and additional request options.

See DeleteTrafficPolicyInstance for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) DeleteTrafficPolicyRequest

func (c *Route53) DeleteTrafficPolicyRequest(input *DeleteTrafficPolicyInput) (req *request.Request, output *DeleteTrafficPolicyOutput)

DeleteTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the DeleteTrafficPolicy operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteTrafficPolicy for more information on using the DeleteTrafficPolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteTrafficPolicyRequest method.
req, resp := client.DeleteTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteTrafficPolicy

func (*Route53) DeleteTrafficPolicyWithContext

func (c *Route53) DeleteTrafficPolicyWithContext(ctx aws.Context, input *DeleteTrafficPolicyInput, opts ...request.Option) (*DeleteTrafficPolicyOutput, error)

DeleteTrafficPolicyWithContext is the same as DeleteTrafficPolicy with the addition of the ability to pass a context and additional request options.

See DeleteTrafficPolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) DeleteVPCAssociationAuthorization

func (c *Route53) DeleteVPCAssociationAuthorization(input *DeleteVPCAssociationAuthorizationInput) (*DeleteVPCAssociationAuthorizationOutput, error)

DeleteVPCAssociationAuthorization API operation for Amazon Route 53.

Removes authorization to submit an AssociateVPCWithHostedZone request to associate a specified VPC with a hosted zone that was created by a different account. You must use the account that created the hosted zone to submit a DeleteVPCAssociationAuthorization request.

Sending this request only prevents the AWS account that created the VPC from associating the VPC with the Amazon Route 53 hosted zone in the future. If the VPC is already associated with the hosted zone, DeleteVPCAssociationAuthorization won't disassociate the VPC from the hosted zone. If you want to delete an existing association, use DisassociateVPCFromHostedZone.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DeleteVPCAssociationAuthorization for usage and error information.

Returned Error Codes:

  • ErrCodeConcurrentModification "ConcurrentModification" Another user submitted a request to create, update, or delete the object at the same time that you did. Retry the request.

  • ErrCodeVPCAssociationAuthorizationNotFound "VPCAssociationAuthorizationNotFound" The VPC that you specified is not authorized to be associated with the hosted zone.

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidVPCId "InvalidVPCId" The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteVPCAssociationAuthorization

func (*Route53) DeleteVPCAssociationAuthorizationRequest

func (c *Route53) DeleteVPCAssociationAuthorizationRequest(input *DeleteVPCAssociationAuthorizationInput) (req *request.Request, output *DeleteVPCAssociationAuthorizationOutput)

DeleteVPCAssociationAuthorizationRequest generates a "aws/request.Request" representing the client's request for the DeleteVPCAssociationAuthorization operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteVPCAssociationAuthorization for more information on using the DeleteVPCAssociationAuthorization API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteVPCAssociationAuthorizationRequest method.
req, resp := client.DeleteVPCAssociationAuthorizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DeleteVPCAssociationAuthorization

func (*Route53) DeleteVPCAssociationAuthorizationWithContext

func (c *Route53) DeleteVPCAssociationAuthorizationWithContext(ctx aws.Context, input *DeleteVPCAssociationAuthorizationInput, opts ...request.Option) (*DeleteVPCAssociationAuthorizationOutput, error)

DeleteVPCAssociationAuthorizationWithContext is the same as DeleteVPCAssociationAuthorization with the addition of the ability to pass a context and additional request options.

See DeleteVPCAssociationAuthorization for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) DisassociateVPCFromHostedZone

func (c *Route53) DisassociateVPCFromHostedZone(input *DisassociateVPCFromHostedZoneInput) (*DisassociateVPCFromHostedZoneOutput, error)

DisassociateVPCFromHostedZone API operation for Amazon Route 53.

Disassociates a VPC from a Amazon Route 53 private hosted zone.

You can't disassociate the last VPC from a private hosted zone.

You can't disassociate a VPC from a private hosted zone when only one VPC is associated with the hosted zone. You also can't convert a private hosted zone into a public hosted zone.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation DisassociateVPCFromHostedZone for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidVPCId "InvalidVPCId" The VPC ID that you specified either isn't a valid ID or the current account is not authorized to access this VPC.

  • ErrCodeVPCAssociationNotFound "VPCAssociationNotFound" The specified VPC and hosted zone are not currently associated.

  • ErrCodeLastVPCAssociation "LastVPCAssociation" The VPC that you're trying to disassociate from the private hosted zone is the last VPC that is associated with the hosted zone. Amazon Route 53 doesn't support disassociating the last VPC from a hosted zone.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DisassociateVPCFromHostedZone

func (*Route53) DisassociateVPCFromHostedZoneRequest

func (c *Route53) DisassociateVPCFromHostedZoneRequest(input *DisassociateVPCFromHostedZoneInput) (req *request.Request, output *DisassociateVPCFromHostedZoneOutput)

DisassociateVPCFromHostedZoneRequest generates a "aws/request.Request" representing the client's request for the DisassociateVPCFromHostedZone operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DisassociateVPCFromHostedZone for more information on using the DisassociateVPCFromHostedZone API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DisassociateVPCFromHostedZoneRequest method.
req, resp := client.DisassociateVPCFromHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/DisassociateVPCFromHostedZone

func (*Route53) DisassociateVPCFromHostedZoneWithContext

func (c *Route53) DisassociateVPCFromHostedZoneWithContext(ctx aws.Context, input *DisassociateVPCFromHostedZoneInput, opts ...request.Option) (*DisassociateVPCFromHostedZoneOutput, error)

DisassociateVPCFromHostedZoneWithContext is the same as DisassociateVPCFromHostedZone with the addition of the ability to pass a context and additional request options.

See DisassociateVPCFromHostedZone for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetChange

func (c *Route53) GetChange(input *GetChangeInput) (*GetChangeOutput, error)

GetChange API operation for Amazon Route 53.

Returns the current status of a change batch request. The status is one of the following values:

  • PENDING indicates that the changes in this request have not propagated to all Amazon Route 53 DNS servers. This is the initial status of all change batch requests.

  • INSYNC indicates that the changes have propagated to all Amazon Route 53 DNS servers.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetChange for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchChange "NoSuchChange" A change with the specified change ID does not exist.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetChange

func (*Route53) GetChangeRequest

func (c *Route53) GetChangeRequest(input *GetChangeInput) (req *request.Request, output *GetChangeOutput)

GetChangeRequest generates a "aws/request.Request" representing the client's request for the GetChange operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetChange for more information on using the GetChange API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetChangeRequest method.
req, resp := client.GetChangeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetChange

func (*Route53) GetChangeWithContext

func (c *Route53) GetChangeWithContext(ctx aws.Context, input *GetChangeInput, opts ...request.Option) (*GetChangeOutput, error)

GetChangeWithContext is the same as GetChange with the addition of the ability to pass a context and additional request options.

See GetChange for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetCheckerIpRanges

func (c *Route53) GetCheckerIpRanges(input *GetCheckerIpRangesInput) (*GetCheckerIpRangesOutput, error)

GetCheckerIpRanges API operation for Amazon Route 53.

GetCheckerIpRanges still works, but we recommend that you download ip-ranges.json, which includes IP address ranges for all AWS services. For more information, see IP Address Ranges of Amazon Route 53 Servers (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/route-53-ip-addresses.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetCheckerIpRanges for usage and error information. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetCheckerIpRanges

func (*Route53) GetCheckerIpRangesRequest

func (c *Route53) GetCheckerIpRangesRequest(input *GetCheckerIpRangesInput) (req *request.Request, output *GetCheckerIpRangesOutput)

GetCheckerIpRangesRequest generates a "aws/request.Request" representing the client's request for the GetCheckerIpRanges operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetCheckerIpRanges for more information on using the GetCheckerIpRanges API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetCheckerIpRangesRequest method.
req, resp := client.GetCheckerIpRangesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetCheckerIpRanges

func (*Route53) GetCheckerIpRangesWithContext

func (c *Route53) GetCheckerIpRangesWithContext(ctx aws.Context, input *GetCheckerIpRangesInput, opts ...request.Option) (*GetCheckerIpRangesOutput, error)

GetCheckerIpRangesWithContext is the same as GetCheckerIpRanges with the addition of the ability to pass a context and additional request options.

See GetCheckerIpRanges for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetGeoLocation

func (c *Route53) GetGeoLocation(input *GetGeoLocationInput) (*GetGeoLocationOutput, error)

GetGeoLocation API operation for Amazon Route 53.

Gets information about whether a specified geographic location is supported for Amazon Route 53 geolocation resource record sets.

Use the following syntax to determine whether a continent is supported for geolocation:

GET /2013-04-01/geolocation?ContinentCode=two-letter abbreviation for a continent

Use the following syntax to determine whether a country is supported for geolocation:

GET /2013-04-01/geolocation?CountryCode=two-character country code

Use the following syntax to determine whether a subdivision of a country is supported for geolocation:

GET /2013-04-01/geolocation?CountryCode=two-character country code&SubdivisionCode=subdivision code

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetGeoLocation for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchGeoLocation "NoSuchGeoLocation" Amazon Route 53 doesn't support the specified geolocation.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetGeoLocation

func (*Route53) GetGeoLocationRequest

func (c *Route53) GetGeoLocationRequest(input *GetGeoLocationInput) (req *request.Request, output *GetGeoLocationOutput)

GetGeoLocationRequest generates a "aws/request.Request" representing the client's request for the GetGeoLocation operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetGeoLocation for more information on using the GetGeoLocation API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetGeoLocationRequest method.
req, resp := client.GetGeoLocationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetGeoLocation

func (*Route53) GetGeoLocationWithContext

func (c *Route53) GetGeoLocationWithContext(ctx aws.Context, input *GetGeoLocationInput, opts ...request.Option) (*GetGeoLocationOutput, error)

GetGeoLocationWithContext is the same as GetGeoLocation with the addition of the ability to pass a context and additional request options.

See GetGeoLocation for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetHealthCheck

func (c *Route53) GetHealthCheck(input *GetHealthCheckInput) (*GetHealthCheckOutput, error)

GetHealthCheck API operation for Amazon Route 53.

Gets information about a specified health check.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHealthCheck for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeIncompatibleVersion "IncompatibleVersion" The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheck

func (*Route53) GetHealthCheckCount

func (c *Route53) GetHealthCheckCount(input *GetHealthCheckCountInput) (*GetHealthCheckCountOutput, error)

GetHealthCheckCount API operation for Amazon Route 53.

Retrieves the number of health checks that are associated with the current AWS account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHealthCheckCount for usage and error information. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckCount

func (*Route53) GetHealthCheckCountRequest

func (c *Route53) GetHealthCheckCountRequest(input *GetHealthCheckCountInput) (req *request.Request, output *GetHealthCheckCountOutput)

GetHealthCheckCountRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckCount operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetHealthCheckCount for more information on using the GetHealthCheckCount API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetHealthCheckCountRequest method.
req, resp := client.GetHealthCheckCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckCount

func (*Route53) GetHealthCheckCountWithContext

func (c *Route53) GetHealthCheckCountWithContext(ctx aws.Context, input *GetHealthCheckCountInput, opts ...request.Option) (*GetHealthCheckCountOutput, error)

GetHealthCheckCountWithContext is the same as GetHealthCheckCount with the addition of the ability to pass a context and additional request options.

See GetHealthCheckCount for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetHealthCheckLastFailureReason

func (c *Route53) GetHealthCheckLastFailureReason(input *GetHealthCheckLastFailureReasonInput) (*GetHealthCheckLastFailureReasonOutput, error)

GetHealthCheckLastFailureReason API operation for Amazon Route 53.

Gets the reason that a specified health check failed most recently.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHealthCheckLastFailureReason for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckLastFailureReason

func (*Route53) GetHealthCheckLastFailureReasonRequest

func (c *Route53) GetHealthCheckLastFailureReasonRequest(input *GetHealthCheckLastFailureReasonInput) (req *request.Request, output *GetHealthCheckLastFailureReasonOutput)

GetHealthCheckLastFailureReasonRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckLastFailureReason operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetHealthCheckLastFailureReason for more information on using the GetHealthCheckLastFailureReason API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetHealthCheckLastFailureReasonRequest method.
req, resp := client.GetHealthCheckLastFailureReasonRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckLastFailureReason

func (*Route53) GetHealthCheckLastFailureReasonWithContext

func (c *Route53) GetHealthCheckLastFailureReasonWithContext(ctx aws.Context, input *GetHealthCheckLastFailureReasonInput, opts ...request.Option) (*GetHealthCheckLastFailureReasonOutput, error)

GetHealthCheckLastFailureReasonWithContext is the same as GetHealthCheckLastFailureReason with the addition of the ability to pass a context and additional request options.

See GetHealthCheckLastFailureReason for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetHealthCheckRequest

func (c *Route53) GetHealthCheckRequest(input *GetHealthCheckInput) (req *request.Request, output *GetHealthCheckOutput)

GetHealthCheckRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheck operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetHealthCheck for more information on using the GetHealthCheck API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetHealthCheckRequest method.
req, resp := client.GetHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheck

func (*Route53) GetHealthCheckStatus

func (c *Route53) GetHealthCheckStatus(input *GetHealthCheckStatusInput) (*GetHealthCheckStatusOutput, error)

GetHealthCheckStatus API operation for Amazon Route 53.

Gets status of a specified health check.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHealthCheckStatus for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckStatus

func (*Route53) GetHealthCheckStatusRequest

func (c *Route53) GetHealthCheckStatusRequest(input *GetHealthCheckStatusInput) (req *request.Request, output *GetHealthCheckStatusOutput)

GetHealthCheckStatusRequest generates a "aws/request.Request" representing the client's request for the GetHealthCheckStatus operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetHealthCheckStatus for more information on using the GetHealthCheckStatus API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetHealthCheckStatusRequest method.
req, resp := client.GetHealthCheckStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHealthCheckStatus

func (*Route53) GetHealthCheckStatusWithContext

func (c *Route53) GetHealthCheckStatusWithContext(ctx aws.Context, input *GetHealthCheckStatusInput, opts ...request.Option) (*GetHealthCheckStatusOutput, error)

GetHealthCheckStatusWithContext is the same as GetHealthCheckStatus with the addition of the ability to pass a context and additional request options.

See GetHealthCheckStatus for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetHealthCheckWithContext

func (c *Route53) GetHealthCheckWithContext(ctx aws.Context, input *GetHealthCheckInput, opts ...request.Option) (*GetHealthCheckOutput, error)

GetHealthCheckWithContext is the same as GetHealthCheck with the addition of the ability to pass a context and additional request options.

See GetHealthCheck for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetHostedZone

func (c *Route53) GetHostedZone(input *GetHostedZoneInput) (*GetHostedZoneOutput, error)

GetHostedZone API operation for Amazon Route 53.

Gets information about a specified hosted zone including the four name servers assigned to the hosted zone.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHostedZone for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHostedZone

Example (Shared00)

To get information about a hosted zone

The following example gets information about the Z3M3LMPEXAMPLE hosted zone.

package main

import (
	"fmt"

	"github.com/aws/aws-sdk-go/aws"
	"github.com/aws/aws-sdk-go/aws/awserr"
	"github.com/aws/aws-sdk-go/aws/session"
	"github.com/aws/aws-sdk-go/service/route53"
)

func main() {
	svc := route53.New(session.New())
	input := &route53.GetHostedZoneInput{
		Id: aws.String("Z3M3LMPEXAMPLE"),
	}

	result, err := svc.GetHostedZone(input)
	if err != nil {
		if aerr, ok := err.(awserr.Error); ok {
			switch aerr.Code() {
			case route53.ErrCodeNoSuchHostedZone:
				fmt.Println(route53.ErrCodeNoSuchHostedZone, aerr.Error())
			case route53.ErrCodeInvalidInput:
				fmt.Println(route53.ErrCodeInvalidInput, aerr.Error())
			default:
				fmt.Println(aerr.Error())
			}
		} else {
			// Print the error, cast err to awserr.Error to get the Code and
			// Message from an error.
			fmt.Println(err.Error())
		}
		return
	}

	fmt.Println(result)
}
Output:

func (*Route53) GetHostedZoneCount

func (c *Route53) GetHostedZoneCount(input *GetHostedZoneCountInput) (*GetHostedZoneCountOutput, error)

GetHostedZoneCount API operation for Amazon Route 53.

Retrieves the number of hosted zones that are associated with the current AWS account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetHostedZoneCount for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHostedZoneCount

func (*Route53) GetHostedZoneCountRequest

func (c *Route53) GetHostedZoneCountRequest(input *GetHostedZoneCountInput) (req *request.Request, output *GetHostedZoneCountOutput)

GetHostedZoneCountRequest generates a "aws/request.Request" representing the client's request for the GetHostedZoneCount operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetHostedZoneCount for more information on using the GetHostedZoneCount API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetHostedZoneCountRequest method.
req, resp := client.GetHostedZoneCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHostedZoneCount

func (*Route53) GetHostedZoneCountWithContext

func (c *Route53) GetHostedZoneCountWithContext(ctx aws.Context, input *GetHostedZoneCountInput, opts ...request.Option) (*GetHostedZoneCountOutput, error)

GetHostedZoneCountWithContext is the same as GetHostedZoneCount with the addition of the ability to pass a context and additional request options.

See GetHostedZoneCount for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetHostedZoneRequest

func (c *Route53) GetHostedZoneRequest(input *GetHostedZoneInput) (req *request.Request, output *GetHostedZoneOutput)

GetHostedZoneRequest generates a "aws/request.Request" representing the client's request for the GetHostedZone operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetHostedZone for more information on using the GetHostedZone API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetHostedZoneRequest method.
req, resp := client.GetHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetHostedZone

func (*Route53) GetHostedZoneWithContext

func (c *Route53) GetHostedZoneWithContext(ctx aws.Context, input *GetHostedZoneInput, opts ...request.Option) (*GetHostedZoneOutput, error)

GetHostedZoneWithContext is the same as GetHostedZone with the addition of the ability to pass a context and additional request options.

See GetHostedZone for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetQueryLoggingConfig

func (c *Route53) GetQueryLoggingConfig(input *GetQueryLoggingConfigInput) (*GetQueryLoggingConfigOutput, error)

GetQueryLoggingConfig API operation for Amazon Route 53.

Gets information about a specified configuration for DNS query logging.

For more information about DNS query logs, see CreateQueryLoggingConfig and Logging DNS Queries (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetQueryLoggingConfig for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchQueryLoggingConfig "NoSuchQueryLoggingConfig" There is no DNS query logging configuration with the specified ID.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetQueryLoggingConfig

func (*Route53) GetQueryLoggingConfigRequest

func (c *Route53) GetQueryLoggingConfigRequest(input *GetQueryLoggingConfigInput) (req *request.Request, output *GetQueryLoggingConfigOutput)

GetQueryLoggingConfigRequest generates a "aws/request.Request" representing the client's request for the GetQueryLoggingConfig operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetQueryLoggingConfig for more information on using the GetQueryLoggingConfig API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetQueryLoggingConfigRequest method.
req, resp := client.GetQueryLoggingConfigRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetQueryLoggingConfig

func (*Route53) GetQueryLoggingConfigWithContext

func (c *Route53) GetQueryLoggingConfigWithContext(ctx aws.Context, input *GetQueryLoggingConfigInput, opts ...request.Option) (*GetQueryLoggingConfigOutput, error)

GetQueryLoggingConfigWithContext is the same as GetQueryLoggingConfig with the addition of the ability to pass a context and additional request options.

See GetQueryLoggingConfig for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetReusableDelegationSet

func (c *Route53) GetReusableDelegationSet(input *GetReusableDelegationSetInput) (*GetReusableDelegationSetOutput, error)

GetReusableDelegationSet API operation for Amazon Route 53.

Retrieves information about a specified reusable delegation set, including the four name servers that are assigned to the delegation set.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetReusableDelegationSet for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchDelegationSet "NoSuchDelegationSet" A reusable delegation set with the specified ID does not exist.

  • ErrCodeDelegationSetNotReusable "DelegationSetNotReusable" A reusable delegation set with the specified ID does not exist.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetReusableDelegationSet

func (*Route53) GetReusableDelegationSetRequest

func (c *Route53) GetReusableDelegationSetRequest(input *GetReusableDelegationSetInput) (req *request.Request, output *GetReusableDelegationSetOutput)

GetReusableDelegationSetRequest generates a "aws/request.Request" representing the client's request for the GetReusableDelegationSet operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetReusableDelegationSet for more information on using the GetReusableDelegationSet API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetReusableDelegationSetRequest method.
req, resp := client.GetReusableDelegationSetRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetReusableDelegationSet

func (*Route53) GetReusableDelegationSetWithContext

func (c *Route53) GetReusableDelegationSetWithContext(ctx aws.Context, input *GetReusableDelegationSetInput, opts ...request.Option) (*GetReusableDelegationSetOutput, error)

GetReusableDelegationSetWithContext is the same as GetReusableDelegationSet with the addition of the ability to pass a context and additional request options.

See GetReusableDelegationSet for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetTrafficPolicy

func (c *Route53) GetTrafficPolicy(input *GetTrafficPolicyInput) (*GetTrafficPolicyOutput, error)

GetTrafficPolicy API operation for Amazon Route 53.

Gets information about a specific traffic policy version.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetTrafficPolicy for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchTrafficPolicy "NoSuchTrafficPolicy" No traffic policy exists with the specified ID.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicy

func (*Route53) GetTrafficPolicyInstance

func (c *Route53) GetTrafficPolicyInstance(input *GetTrafficPolicyInstanceInput) (*GetTrafficPolicyInstanceOutput, error)

GetTrafficPolicyInstance API operation for Amazon Route 53.

Gets information about a specified traffic policy instance.

After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element.

In the Amazon Route 53 console, traffic policy instances are known as policy records.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetTrafficPolicyInstance for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchTrafficPolicyInstance "NoSuchTrafficPolicyInstance" No traffic policy instance exists with the specified ID.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyInstance

func (*Route53) GetTrafficPolicyInstanceCount

func (c *Route53) GetTrafficPolicyInstanceCount(input *GetTrafficPolicyInstanceCountInput) (*GetTrafficPolicyInstanceCountOutput, error)

GetTrafficPolicyInstanceCount API operation for Amazon Route 53.

Gets the number of traffic policy instances that are associated with the current AWS account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation GetTrafficPolicyInstanceCount for usage and error information. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyInstanceCount

func (*Route53) GetTrafficPolicyInstanceCountRequest

func (c *Route53) GetTrafficPolicyInstanceCountRequest(input *GetTrafficPolicyInstanceCountInput) (req *request.Request, output *GetTrafficPolicyInstanceCountOutput)

GetTrafficPolicyInstanceCountRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicyInstanceCount operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetTrafficPolicyInstanceCount for more information on using the GetTrafficPolicyInstanceCount API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetTrafficPolicyInstanceCountRequest method.
req, resp := client.GetTrafficPolicyInstanceCountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyInstanceCount

func (*Route53) GetTrafficPolicyInstanceCountWithContext

func (c *Route53) GetTrafficPolicyInstanceCountWithContext(ctx aws.Context, input *GetTrafficPolicyInstanceCountInput, opts ...request.Option) (*GetTrafficPolicyInstanceCountOutput, error)

GetTrafficPolicyInstanceCountWithContext is the same as GetTrafficPolicyInstanceCount with the addition of the ability to pass a context and additional request options.

See GetTrafficPolicyInstanceCount for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetTrafficPolicyInstanceRequest

func (c *Route53) GetTrafficPolicyInstanceRequest(input *GetTrafficPolicyInstanceInput) (req *request.Request, output *GetTrafficPolicyInstanceOutput)

GetTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicyInstance operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetTrafficPolicyInstance for more information on using the GetTrafficPolicyInstance API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetTrafficPolicyInstanceRequest method.
req, resp := client.GetTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicyInstance

func (*Route53) GetTrafficPolicyInstanceWithContext

func (c *Route53) GetTrafficPolicyInstanceWithContext(ctx aws.Context, input *GetTrafficPolicyInstanceInput, opts ...request.Option) (*GetTrafficPolicyInstanceOutput, error)

GetTrafficPolicyInstanceWithContext is the same as GetTrafficPolicyInstance with the addition of the ability to pass a context and additional request options.

See GetTrafficPolicyInstance for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) GetTrafficPolicyRequest

func (c *Route53) GetTrafficPolicyRequest(input *GetTrafficPolicyInput) (req *request.Request, output *GetTrafficPolicyOutput)

GetTrafficPolicyRequest generates a "aws/request.Request" representing the client's request for the GetTrafficPolicy operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See GetTrafficPolicy for more information on using the GetTrafficPolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the GetTrafficPolicyRequest method.
req, resp := client.GetTrafficPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/GetTrafficPolicy

func (*Route53) GetTrafficPolicyWithContext

func (c *Route53) GetTrafficPolicyWithContext(ctx aws.Context, input *GetTrafficPolicyInput, opts ...request.Option) (*GetTrafficPolicyOutput, error)

GetTrafficPolicyWithContext is the same as GetTrafficPolicy with the addition of the ability to pass a context and additional request options.

See GetTrafficPolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListGeoLocations

func (c *Route53) ListGeoLocations(input *ListGeoLocationsInput) (*ListGeoLocationsOutput, error)

ListGeoLocations API operation for Amazon Route 53.

Retrieves a list of supported geo locations.

Countries are listed first, and continents are listed last. If Amazon Route 53 supports subdivisions for a country (for example, states or provinces), the subdivisions for that country are listed in alphabetical order immediately after the corresponding country.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListGeoLocations for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListGeoLocations

func (*Route53) ListGeoLocationsRequest

func (c *Route53) ListGeoLocationsRequest(input *ListGeoLocationsInput) (req *request.Request, output *ListGeoLocationsOutput)

ListGeoLocationsRequest generates a "aws/request.Request" representing the client's request for the ListGeoLocations operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListGeoLocations for more information on using the ListGeoLocations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListGeoLocationsRequest method.
req, resp := client.ListGeoLocationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListGeoLocations

func (*Route53) ListGeoLocationsWithContext

func (c *Route53) ListGeoLocationsWithContext(ctx aws.Context, input *ListGeoLocationsInput, opts ...request.Option) (*ListGeoLocationsOutput, error)

ListGeoLocationsWithContext is the same as ListGeoLocations with the addition of the ability to pass a context and additional request options.

See ListGeoLocations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListHealthChecks

func (c *Route53) ListHealthChecks(input *ListHealthChecksInput) (*ListHealthChecksOutput, error)

ListHealthChecks API operation for Amazon Route 53.

Retrieve a list of the health checks that are associated with the current AWS account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListHealthChecks for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeIncompatibleVersion "IncompatibleVersion" The resource you're trying to access is unsupported on this Amazon Route 53 endpoint.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHealthChecks

func (*Route53) ListHealthChecksPages

func (c *Route53) ListHealthChecksPages(input *ListHealthChecksInput, fn func(*ListHealthChecksOutput, bool) bool) error

ListHealthChecksPages iterates over the pages of a ListHealthChecks operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListHealthChecks method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListHealthChecks operation.
pageNum := 0
err := client.ListHealthChecksPages(params,
    func(page *ListHealthChecksOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListHealthChecksPagesWithContext

func (c *Route53) ListHealthChecksPagesWithContext(ctx aws.Context, input *ListHealthChecksInput, fn func(*ListHealthChecksOutput, bool) bool, opts ...request.Option) error

ListHealthChecksPagesWithContext same as ListHealthChecksPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListHealthChecksRequest

func (c *Route53) ListHealthChecksRequest(input *ListHealthChecksInput) (req *request.Request, output *ListHealthChecksOutput)

ListHealthChecksRequest generates a "aws/request.Request" representing the client's request for the ListHealthChecks operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListHealthChecks for more information on using the ListHealthChecks API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListHealthChecksRequest method.
req, resp := client.ListHealthChecksRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHealthChecks

func (*Route53) ListHealthChecksWithContext

func (c *Route53) ListHealthChecksWithContext(ctx aws.Context, input *ListHealthChecksInput, opts ...request.Option) (*ListHealthChecksOutput, error)

ListHealthChecksWithContext is the same as ListHealthChecks with the addition of the ability to pass a context and additional request options.

See ListHealthChecks for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListHostedZones

func (c *Route53) ListHostedZones(input *ListHostedZonesInput) (*ListHostedZonesOutput, error)

ListHostedZones API operation for Amazon Route 53.

Retrieves a list of the public and private hosted zones that are associated with the current AWS account. The response includes a HostedZones child element for each hosted zone.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of hosted zones, you can use the maxitems parameter to list them in groups of up to 100.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListHostedZones for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchDelegationSet "NoSuchDelegationSet" A reusable delegation set with the specified ID does not exist.

  • ErrCodeDelegationSetNotReusable "DelegationSetNotReusable" A reusable delegation set with the specified ID does not exist.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHostedZones

func (*Route53) ListHostedZonesByName

func (c *Route53) ListHostedZonesByName(input *ListHostedZonesByNameInput) (*ListHostedZonesByNameOutput, error)

ListHostedZonesByName API operation for Amazon Route 53.

Retrieves a list of your hosted zones in lexicographic order. The response includes a HostedZones child element for each hosted zone created by the current AWS account.

ListHostedZonesByName sorts hosted zones by name with the labels reversed. For example:

com.example.www.

Note the trailing dot, which can change the sort order in some circumstances.

If the domain name includes escape characters or Punycode, ListHostedZonesByName alphabetizes the domain name using the escaped or Punycoded value, which is the format that Amazon Route 53 saves in its database. For example, to create a hosted zone for exämple.com, you specify ex\344mple.com for the domain name. ListHostedZonesByName alphabetizes it as:

com.ex\344mple.

The labels are reversed and alphabetized using the escaped value. For more information about valid domain name formats, including internationalized domain names, see DNS Domain Name Format (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/DomainNameFormat.html) in the Amazon Route 53 Developer Guide.

Amazon Route 53 returns up to 100 items in each response. If you have a lot of hosted zones, use the MaxItems parameter to list them in groups of up to 100. The response includes values that help navigate from one group of MaxItems hosted zones to the next:

  • The DNSName and HostedZoneId elements in the response contain the values, if any, specified for the dnsname and hostedzoneid parameters in the request that produced the current response.

  • The MaxItems element in the response contains the value, if any, that you specified for the maxitems parameter in the request that produced the current response.

  • If the value of IsTruncated in the response is true, there are more hosted zones associated with the current AWS account.

If IsTruncated is false, this response includes the last hosted zone that

is associated with the current account. The NextDNSName element and NextHostedZoneId
elements are omitted from the response.

* The NextDNSName and NextHostedZoneId elements in the response contain
the domain name and the hosted zone ID of the next hosted zone that is
associated with the current AWS account. If you want to list more hosted
zones, make another call to ListHostedZonesByName, and specify the value
of NextDNSName and NextHostedZoneId in the dnsname and hostedzoneid parameters,
respectively.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListHostedZonesByName for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeInvalidDomainName "InvalidDomainName" The specified domain name is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHostedZonesByName

func (*Route53) ListHostedZonesByNameRequest

func (c *Route53) ListHostedZonesByNameRequest(input *ListHostedZonesByNameInput) (req *request.Request, output *ListHostedZonesByNameOutput)

ListHostedZonesByNameRequest generates a "aws/request.Request" representing the client's request for the ListHostedZonesByName operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListHostedZonesByName for more information on using the ListHostedZonesByName API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListHostedZonesByNameRequest method.
req, resp := client.ListHostedZonesByNameRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHostedZonesByName

func (*Route53) ListHostedZonesByNameWithContext

func (c *Route53) ListHostedZonesByNameWithContext(ctx aws.Context, input *ListHostedZonesByNameInput, opts ...request.Option) (*ListHostedZonesByNameOutput, error)

ListHostedZonesByNameWithContext is the same as ListHostedZonesByName with the addition of the ability to pass a context and additional request options.

See ListHostedZonesByName for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListHostedZonesPages

func (c *Route53) ListHostedZonesPages(input *ListHostedZonesInput, fn func(*ListHostedZonesOutput, bool) bool) error

ListHostedZonesPages iterates over the pages of a ListHostedZones operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListHostedZones method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListHostedZones operation.
pageNum := 0
err := client.ListHostedZonesPages(params,
    func(page *ListHostedZonesOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListHostedZonesPagesWithContext

func (c *Route53) ListHostedZonesPagesWithContext(ctx aws.Context, input *ListHostedZonesInput, fn func(*ListHostedZonesOutput, bool) bool, opts ...request.Option) error

ListHostedZonesPagesWithContext same as ListHostedZonesPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListHostedZonesRequest

func (c *Route53) ListHostedZonesRequest(input *ListHostedZonesInput) (req *request.Request, output *ListHostedZonesOutput)

ListHostedZonesRequest generates a "aws/request.Request" representing the client's request for the ListHostedZones operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListHostedZones for more information on using the ListHostedZones API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListHostedZonesRequest method.
req, resp := client.ListHostedZonesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListHostedZones

func (*Route53) ListHostedZonesWithContext

func (c *Route53) ListHostedZonesWithContext(ctx aws.Context, input *ListHostedZonesInput, opts ...request.Option) (*ListHostedZonesOutput, error)

ListHostedZonesWithContext is the same as ListHostedZones with the addition of the ability to pass a context and additional request options.

See ListHostedZones for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListQueryLoggingConfigs

func (c *Route53) ListQueryLoggingConfigs(input *ListQueryLoggingConfigsInput) (*ListQueryLoggingConfigsOutput, error)

ListQueryLoggingConfigs API operation for Amazon Route 53.

Lists the configurations for DNS query logging that are associated with the current AWS account or the configuration that is associated with a specified hosted zone.

For more information about DNS query logs, see CreateQueryLoggingConfig. Additional information, including the format of DNS query logs, appears in Logging DNS Queries (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/query-logs.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListQueryLoggingConfigs for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeInvalidPaginationToken "InvalidPaginationToken" The value that you specified to get the second or subsequent page of results is invalid.

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListQueryLoggingConfigs

func (*Route53) ListQueryLoggingConfigsRequest

func (c *Route53) ListQueryLoggingConfigsRequest(input *ListQueryLoggingConfigsInput) (req *request.Request, output *ListQueryLoggingConfigsOutput)

ListQueryLoggingConfigsRequest generates a "aws/request.Request" representing the client's request for the ListQueryLoggingConfigs operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListQueryLoggingConfigs for more information on using the ListQueryLoggingConfigs API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListQueryLoggingConfigsRequest method.
req, resp := client.ListQueryLoggingConfigsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListQueryLoggingConfigs

func (*Route53) ListQueryLoggingConfigsWithContext

func (c *Route53) ListQueryLoggingConfigsWithContext(ctx aws.Context, input *ListQueryLoggingConfigsInput, opts ...request.Option) (*ListQueryLoggingConfigsOutput, error)

ListQueryLoggingConfigsWithContext is the same as ListQueryLoggingConfigs with the addition of the ability to pass a context and additional request options.

See ListQueryLoggingConfigs for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListResourceRecordSets

func (c *Route53) ListResourceRecordSets(input *ListResourceRecordSetsInput) (*ListResourceRecordSetsOutput, error)

ListResourceRecordSets API operation for Amazon Route 53.

Lists the resource record sets in a specified hosted zone.

ListResourceRecordSets returns up to 100 resource record sets at a time in ASCII order, beginning at a position specified by the name and type elements. The action sorts results first by DNS name with the labels reversed, for example:

com.example.www.

Note the trailing dot, which can change the sort order in some circumstances.

When multiple records have the same DNS name, the action sorts results by the record type.

You can use the name and type elements to adjust the beginning position of the list of resource record sets returned:

If you do not specify Name or TypeThe results begin with the first resource record set that the hosted zone contains.

If you specify Name but not TypeThe results begin with the first resource record set in the list whose name is greater than or equal to Name.

If you specify Type but not NameAmazon Route 53 returns the InvalidInput error.

If you specify both Name and TypeThe results begin with the first resource record set in the list whose name is greater than or equal to Name, and whose type is greater than or equal to Type.

This action returns the most current version of the records. This includes records that are PENDING, and that are not yet available on all Amazon Route 53 DNS servers.

To ensure that you get an accurate listing of the resource record sets for a hosted zone at a point in time, do not submit a ChangeResourceRecordSets request while you're paging through the results of a ListResourceRecordSets request. If you do, some pages may display results without the latest changes while other pages display results with the latest changes.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListResourceRecordSets for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListResourceRecordSets

func (*Route53) ListResourceRecordSetsPages

func (c *Route53) ListResourceRecordSetsPages(input *ListResourceRecordSetsInput, fn func(*ListResourceRecordSetsOutput, bool) bool) error

ListResourceRecordSetsPages iterates over the pages of a ListResourceRecordSets operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListResourceRecordSets method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListResourceRecordSets operation.
pageNum := 0
err := client.ListResourceRecordSetsPages(params,
    func(page *ListResourceRecordSetsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Route53) ListResourceRecordSetsPagesWithContext

func (c *Route53) ListResourceRecordSetsPagesWithContext(ctx aws.Context, input *ListResourceRecordSetsInput, fn func(*ListResourceRecordSetsOutput, bool) bool, opts ...request.Option) error

ListResourceRecordSetsPagesWithContext same as ListResourceRecordSetsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListResourceRecordSetsRequest

func (c *Route53) ListResourceRecordSetsRequest(input *ListResourceRecordSetsInput) (req *request.Request, output *ListResourceRecordSetsOutput)

ListResourceRecordSetsRequest generates a "aws/request.Request" representing the client's request for the ListResourceRecordSets operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListResourceRecordSets for more information on using the ListResourceRecordSets API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListResourceRecordSetsRequest method.
req, resp := client.ListResourceRecordSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListResourceRecordSets

func (*Route53) ListResourceRecordSetsWithContext

func (c *Route53) ListResourceRecordSetsWithContext(ctx aws.Context, input *ListResourceRecordSetsInput, opts ...request.Option) (*ListResourceRecordSetsOutput, error)

ListResourceRecordSetsWithContext is the same as ListResourceRecordSets with the addition of the ability to pass a context and additional request options.

See ListResourceRecordSets for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListReusableDelegationSets

func (c *Route53) ListReusableDelegationSets(input *ListReusableDelegationSetsInput) (*ListReusableDelegationSetsOutput, error)

ListReusableDelegationSets API operation for Amazon Route 53.

Retrieves a list of the reusable delegation sets that are associated with the current AWS account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListReusableDelegationSets for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListReusableDelegationSets

func (*Route53) ListReusableDelegationSetsRequest

func (c *Route53) ListReusableDelegationSetsRequest(input *ListReusableDelegationSetsInput) (req *request.Request, output *ListReusableDelegationSetsOutput)

ListReusableDelegationSetsRequest generates a "aws/request.Request" representing the client's request for the ListReusableDelegationSets operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListReusableDelegationSets for more information on using the ListReusableDelegationSets API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListReusableDelegationSetsRequest method.
req, resp := client.ListReusableDelegationSetsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListReusableDelegationSets

func (*Route53) ListReusableDelegationSetsWithContext

func (c *Route53) ListReusableDelegationSetsWithContext(ctx aws.Context, input *ListReusableDelegationSetsInput, opts ...request.Option) (*ListReusableDelegationSetsOutput, error)

ListReusableDelegationSetsWithContext is the same as ListReusableDelegationSets with the addition of the ability to pass a context and additional request options.

See ListReusableDelegationSets for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListTagsForResource

func (c *Route53) ListTagsForResource(input *ListTagsForResourceInput) (*ListTagsForResourceOutput, error)

ListTagsForResource API operation for Amazon Route 53.

Lists tags for one health check or hosted zone.

For information about using tags for cost allocation, see Using Cost Allocation Tags (http://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html) in the AWS Billing and Cost Management User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTagsForResource for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodePriorRequestNotComplete "PriorRequestNotComplete" If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

  • ErrCodeThrottlingException "ThrottlingException" The limit on the number of requests per second was exceeded.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTagsForResource

func (*Route53) ListTagsForResourceRequest

func (c *Route53) ListTagsForResourceRequest(input *ListTagsForResourceInput) (req *request.Request, output *ListTagsForResourceOutput)

ListTagsForResourceRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResource operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTagsForResource for more information on using the ListTagsForResource API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTagsForResourceRequest method.
req, resp := client.ListTagsForResourceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTagsForResource

func (*Route53) ListTagsForResourceWithContext

func (c *Route53) ListTagsForResourceWithContext(ctx aws.Context, input *ListTagsForResourceInput, opts ...request.Option) (*ListTagsForResourceOutput, error)

ListTagsForResourceWithContext is the same as ListTagsForResource with the addition of the ability to pass a context and additional request options.

See ListTagsForResource for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListTagsForResources

func (c *Route53) ListTagsForResources(input *ListTagsForResourcesInput) (*ListTagsForResourcesOutput, error)

ListTagsForResources API operation for Amazon Route 53.

Lists tags for up to 10 health checks or hosted zones.

For information about using tags for cost allocation, see Using Cost Allocation Tags (http://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/cost-alloc-tags.html) in the AWS Billing and Cost Management User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTagsForResources for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodePriorRequestNotComplete "PriorRequestNotComplete" If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

  • ErrCodeThrottlingException "ThrottlingException" The limit on the number of requests per second was exceeded.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTagsForResources

func (*Route53) ListTagsForResourcesRequest

func (c *Route53) ListTagsForResourcesRequest(input *ListTagsForResourcesInput) (req *request.Request, output *ListTagsForResourcesOutput)

ListTagsForResourcesRequest generates a "aws/request.Request" representing the client's request for the ListTagsForResources operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTagsForResources for more information on using the ListTagsForResources API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTagsForResourcesRequest method.
req, resp := client.ListTagsForResourcesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTagsForResources

func (*Route53) ListTagsForResourcesWithContext

func (c *Route53) ListTagsForResourcesWithContext(ctx aws.Context, input *ListTagsForResourcesInput, opts ...request.Option) (*ListTagsForResourcesOutput, error)

ListTagsForResourcesWithContext is the same as ListTagsForResources with the addition of the ability to pass a context and additional request options.

See ListTagsForResources for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListTrafficPolicies

func (c *Route53) ListTrafficPolicies(input *ListTrafficPoliciesInput) (*ListTrafficPoliciesOutput, error)

ListTrafficPolicies API operation for Amazon Route 53.

Gets information about the latest version for every traffic policy that is associated with the current AWS account. Policies are listed in the order in which they were created.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicies for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicies

func (*Route53) ListTrafficPoliciesRequest

func (c *Route53) ListTrafficPoliciesRequest(input *ListTrafficPoliciesInput) (req *request.Request, output *ListTrafficPoliciesOutput)

ListTrafficPoliciesRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicies operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTrafficPolicies for more information on using the ListTrafficPolicies API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTrafficPoliciesRequest method.
req, resp := client.ListTrafficPoliciesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicies

func (*Route53) ListTrafficPoliciesWithContext

func (c *Route53) ListTrafficPoliciesWithContext(ctx aws.Context, input *ListTrafficPoliciesInput, opts ...request.Option) (*ListTrafficPoliciesOutput, error)

ListTrafficPoliciesWithContext is the same as ListTrafficPolicies with the addition of the ability to pass a context and additional request options.

See ListTrafficPolicies for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListTrafficPolicyInstances

func (c *Route53) ListTrafficPolicyInstances(input *ListTrafficPolicyInstancesInput) (*ListTrafficPolicyInstancesOutput, error)

ListTrafficPolicyInstances API operation for Amazon Route 53.

Gets information about the traffic policy instances that you created by using the current AWS account.

After you submit an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicyInstances for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchTrafficPolicyInstance "NoSuchTrafficPolicyInstance" No traffic policy instance exists with the specified ID.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstances

func (*Route53) ListTrafficPolicyInstancesByHostedZone

func (c *Route53) ListTrafficPolicyInstancesByHostedZone(input *ListTrafficPolicyInstancesByHostedZoneInput) (*ListTrafficPolicyInstancesByHostedZoneOutput, error)

ListTrafficPolicyInstancesByHostedZone API operation for Amazon Route 53.

Gets information about the traffic policy instances that you created in a specified hosted zone.

After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicyInstancesByHostedZone for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchTrafficPolicyInstance "NoSuchTrafficPolicyInstance" No traffic policy instance exists with the specified ID.

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesByHostedZone

func (*Route53) ListTrafficPolicyInstancesByHostedZoneRequest

func (c *Route53) ListTrafficPolicyInstancesByHostedZoneRequest(input *ListTrafficPolicyInstancesByHostedZoneInput) (req *request.Request, output *ListTrafficPolicyInstancesByHostedZoneOutput)

ListTrafficPolicyInstancesByHostedZoneRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstancesByHostedZone operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTrafficPolicyInstancesByHostedZone for more information on using the ListTrafficPolicyInstancesByHostedZone API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTrafficPolicyInstancesByHostedZoneRequest method.
req, resp := client.ListTrafficPolicyInstancesByHostedZoneRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesByHostedZone

func (*Route53) ListTrafficPolicyInstancesByHostedZoneWithContext

func (c *Route53) ListTrafficPolicyInstancesByHostedZoneWithContext(ctx aws.Context, input *ListTrafficPolicyInstancesByHostedZoneInput, opts ...request.Option) (*ListTrafficPolicyInstancesByHostedZoneOutput, error)

ListTrafficPolicyInstancesByHostedZoneWithContext is the same as ListTrafficPolicyInstancesByHostedZone with the addition of the ability to pass a context and additional request options.

See ListTrafficPolicyInstancesByHostedZone for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListTrafficPolicyInstancesByPolicy

func (c *Route53) ListTrafficPolicyInstancesByPolicy(input *ListTrafficPolicyInstancesByPolicyInput) (*ListTrafficPolicyInstancesByPolicyOutput, error)

ListTrafficPolicyInstancesByPolicy API operation for Amazon Route 53.

Gets information about the traffic policy instances that you created by using a specify traffic policy version.

After you submit a CreateTrafficPolicyInstance or an UpdateTrafficPolicyInstance request, there's a brief delay while Amazon Route 53 creates the resource record sets that are specified in the traffic policy definition. For more information, see the State response element.

Amazon Route 53 returns a maximum of 100 items in each response. If you have a lot of traffic policy instances, you can use the MaxItems parameter to list them in groups of up to 100.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicyInstancesByPolicy for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchTrafficPolicyInstance "NoSuchTrafficPolicyInstance" No traffic policy instance exists with the specified ID.

  • ErrCodeNoSuchTrafficPolicy "NoSuchTrafficPolicy" No traffic policy exists with the specified ID.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesByPolicy

func (*Route53) ListTrafficPolicyInstancesByPolicyRequest

func (c *Route53) ListTrafficPolicyInstancesByPolicyRequest(input *ListTrafficPolicyInstancesByPolicyInput) (req *request.Request, output *ListTrafficPolicyInstancesByPolicyOutput)

ListTrafficPolicyInstancesByPolicyRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstancesByPolicy operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTrafficPolicyInstancesByPolicy for more information on using the ListTrafficPolicyInstancesByPolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTrafficPolicyInstancesByPolicyRequest method.
req, resp := client.ListTrafficPolicyInstancesByPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstancesByPolicy

func (*Route53) ListTrafficPolicyInstancesByPolicyWithContext

func (c *Route53) ListTrafficPolicyInstancesByPolicyWithContext(ctx aws.Context, input *ListTrafficPolicyInstancesByPolicyInput, opts ...request.Option) (*ListTrafficPolicyInstancesByPolicyOutput, error)

ListTrafficPolicyInstancesByPolicyWithContext is the same as ListTrafficPolicyInstancesByPolicy with the addition of the ability to pass a context and additional request options.

See ListTrafficPolicyInstancesByPolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListTrafficPolicyInstancesRequest

func (c *Route53) ListTrafficPolicyInstancesRequest(input *ListTrafficPolicyInstancesInput) (req *request.Request, output *ListTrafficPolicyInstancesOutput)

ListTrafficPolicyInstancesRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyInstances operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTrafficPolicyInstances for more information on using the ListTrafficPolicyInstances API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTrafficPolicyInstancesRequest method.
req, resp := client.ListTrafficPolicyInstancesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyInstances

func (*Route53) ListTrafficPolicyInstancesWithContext

func (c *Route53) ListTrafficPolicyInstancesWithContext(ctx aws.Context, input *ListTrafficPolicyInstancesInput, opts ...request.Option) (*ListTrafficPolicyInstancesOutput, error)

ListTrafficPolicyInstancesWithContext is the same as ListTrafficPolicyInstances with the addition of the ability to pass a context and additional request options.

See ListTrafficPolicyInstances for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListTrafficPolicyVersions

func (c *Route53) ListTrafficPolicyVersions(input *ListTrafficPolicyVersionsInput) (*ListTrafficPolicyVersionsOutput, error)

ListTrafficPolicyVersions API operation for Amazon Route 53.

Gets information about all of the versions for a specified traffic policy.

Traffic policy versions are listed in numerical order by VersionNumber.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListTrafficPolicyVersions for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchTrafficPolicy "NoSuchTrafficPolicy" No traffic policy exists with the specified ID.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyVersions

func (*Route53) ListTrafficPolicyVersionsRequest

func (c *Route53) ListTrafficPolicyVersionsRequest(input *ListTrafficPolicyVersionsInput) (req *request.Request, output *ListTrafficPolicyVersionsOutput)

ListTrafficPolicyVersionsRequest generates a "aws/request.Request" representing the client's request for the ListTrafficPolicyVersions operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListTrafficPolicyVersions for more information on using the ListTrafficPolicyVersions API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListTrafficPolicyVersionsRequest method.
req, resp := client.ListTrafficPolicyVersionsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListTrafficPolicyVersions

func (*Route53) ListTrafficPolicyVersionsWithContext

func (c *Route53) ListTrafficPolicyVersionsWithContext(ctx aws.Context, input *ListTrafficPolicyVersionsInput, opts ...request.Option) (*ListTrafficPolicyVersionsOutput, error)

ListTrafficPolicyVersionsWithContext is the same as ListTrafficPolicyVersions with the addition of the ability to pass a context and additional request options.

See ListTrafficPolicyVersions for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) ListVPCAssociationAuthorizations

func (c *Route53) ListVPCAssociationAuthorizations(input *ListVPCAssociationAuthorizationsInput) (*ListVPCAssociationAuthorizationsOutput, error)

ListVPCAssociationAuthorizations API operation for Amazon Route 53.

Gets a list of the VPCs that were created by other accounts and that can be associated with a specified hosted zone because you've submitted one or more CreateVPCAssociationAuthorization requests.

The response includes a VPCs element with a VPC child element for each VPC that can be associated with the hosted zone.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation ListVPCAssociationAuthorizations for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeInvalidPaginationToken "InvalidPaginationToken" The value that you specified to get the second or subsequent page of results is invalid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListVPCAssociationAuthorizations

func (*Route53) ListVPCAssociationAuthorizationsRequest

func (c *Route53) ListVPCAssociationAuthorizationsRequest(input *ListVPCAssociationAuthorizationsInput) (req *request.Request, output *ListVPCAssociationAuthorizationsOutput)

ListVPCAssociationAuthorizationsRequest generates a "aws/request.Request" representing the client's request for the ListVPCAssociationAuthorizations operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListVPCAssociationAuthorizations for more information on using the ListVPCAssociationAuthorizations API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListVPCAssociationAuthorizationsRequest method.
req, resp := client.ListVPCAssociationAuthorizationsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/ListVPCAssociationAuthorizations

func (*Route53) ListVPCAssociationAuthorizationsWithContext

func (c *Route53) ListVPCAssociationAuthorizationsWithContext(ctx aws.Context, input *ListVPCAssociationAuthorizationsInput, opts ...request.Option) (*ListVPCAssociationAuthorizationsOutput, error)

ListVPCAssociationAuthorizationsWithContext is the same as ListVPCAssociationAuthorizations with the addition of the ability to pass a context and additional request options.

See ListVPCAssociationAuthorizations for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) TestDNSAnswer

func (c *Route53) TestDNSAnswer(input *TestDNSAnswerInput) (*TestDNSAnswerOutput, error)

TestDNSAnswer API operation for Amazon Route 53.

Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet mask.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation TestDNSAnswer for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/TestDNSAnswer

func (*Route53) TestDNSAnswerRequest

func (c *Route53) TestDNSAnswerRequest(input *TestDNSAnswerInput) (req *request.Request, output *TestDNSAnswerOutput)

TestDNSAnswerRequest generates a "aws/request.Request" representing the client's request for the TestDNSAnswer operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See TestDNSAnswer for more information on using the TestDNSAnswer API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the TestDNSAnswerRequest method.
req, resp := client.TestDNSAnswerRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/TestDNSAnswer

func (*Route53) TestDNSAnswerWithContext

func (c *Route53) TestDNSAnswerWithContext(ctx aws.Context, input *TestDNSAnswerInput, opts ...request.Option) (*TestDNSAnswerOutput, error)

TestDNSAnswerWithContext is the same as TestDNSAnswer with the addition of the ability to pass a context and additional request options.

See TestDNSAnswer for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) UpdateHealthCheck

func (c *Route53) UpdateHealthCheck(input *UpdateHealthCheckInput) (*UpdateHealthCheckOutput, error)

UpdateHealthCheck API operation for Amazon Route 53.

Updates an existing health check. Note that some values can't be updated.

For more information about updating health checks, see Creating, Updating, and Deleting Health Checks (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/health-checks-creating-deleting.html) in the Amazon Route 53 Developer Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation UpdateHealthCheck for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHealthCheck "NoSuchHealthCheck" No health check exists with the ID that you specified in the DeleteHealthCheck request.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeHealthCheckVersionMismatch "HealthCheckVersionMismatch" The value of HealthCheckVersion in the request doesn't match the value of HealthCheckVersion in the health check.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHealthCheck

func (*Route53) UpdateHealthCheckRequest

func (c *Route53) UpdateHealthCheckRequest(input *UpdateHealthCheckInput) (req *request.Request, output *UpdateHealthCheckOutput)

UpdateHealthCheckRequest generates a "aws/request.Request" representing the client's request for the UpdateHealthCheck operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateHealthCheck for more information on using the UpdateHealthCheck API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateHealthCheckRequest method.
req, resp := client.UpdateHealthCheckRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHealthCheck

func (*Route53) UpdateHealthCheckWithContext

func (c *Route53) UpdateHealthCheckWithContext(ctx aws.Context, input *UpdateHealthCheckInput, opts ...request.Option) (*UpdateHealthCheckOutput, error)

UpdateHealthCheckWithContext is the same as UpdateHealthCheck with the addition of the ability to pass a context and additional request options.

See UpdateHealthCheck for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) UpdateHostedZoneComment

func (c *Route53) UpdateHostedZoneComment(input *UpdateHostedZoneCommentInput) (*UpdateHostedZoneCommentOutput, error)

UpdateHostedZoneComment API operation for Amazon Route 53.

Updates the comment for a specified hosted zone.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation UpdateHostedZoneComment for usage and error information.

Returned Error Codes:

  • ErrCodeNoSuchHostedZone "NoSuchHostedZone" No hosted zone exists with the ID that you specified.

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHostedZoneComment

func (*Route53) UpdateHostedZoneCommentRequest

func (c *Route53) UpdateHostedZoneCommentRequest(input *UpdateHostedZoneCommentInput) (req *request.Request, output *UpdateHostedZoneCommentOutput)

UpdateHostedZoneCommentRequest generates a "aws/request.Request" representing the client's request for the UpdateHostedZoneComment operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateHostedZoneComment for more information on using the UpdateHostedZoneComment API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateHostedZoneCommentRequest method.
req, resp := client.UpdateHostedZoneCommentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHostedZoneComment

func (*Route53) UpdateHostedZoneCommentWithContext

func (c *Route53) UpdateHostedZoneCommentWithContext(ctx aws.Context, input *UpdateHostedZoneCommentInput, opts ...request.Option) (*UpdateHostedZoneCommentOutput, error)

UpdateHostedZoneCommentWithContext is the same as UpdateHostedZoneComment with the addition of the ability to pass a context and additional request options.

See UpdateHostedZoneComment for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) UpdateTrafficPolicyComment

func (c *Route53) UpdateTrafficPolicyComment(input *UpdateTrafficPolicyCommentInput) (*UpdateTrafficPolicyCommentOutput, error)

UpdateTrafficPolicyComment API operation for Amazon Route 53.

Updates the comment for a specified traffic policy version.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation UpdateTrafficPolicyComment for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchTrafficPolicy "NoSuchTrafficPolicy" No traffic policy exists with the specified ID.

  • ErrCodeConcurrentModification "ConcurrentModification" Another user submitted a request to create, update, or delete the object at the same time that you did. Retry the request.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateTrafficPolicyComment

func (*Route53) UpdateTrafficPolicyCommentRequest

func (c *Route53) UpdateTrafficPolicyCommentRequest(input *UpdateTrafficPolicyCommentInput) (req *request.Request, output *UpdateTrafficPolicyCommentOutput)

UpdateTrafficPolicyCommentRequest generates a "aws/request.Request" representing the client's request for the UpdateTrafficPolicyComment operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateTrafficPolicyComment for more information on using the UpdateTrafficPolicyComment API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateTrafficPolicyCommentRequest method.
req, resp := client.UpdateTrafficPolicyCommentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateTrafficPolicyComment

func (*Route53) UpdateTrafficPolicyCommentWithContext

func (c *Route53) UpdateTrafficPolicyCommentWithContext(ctx aws.Context, input *UpdateTrafficPolicyCommentInput, opts ...request.Option) (*UpdateTrafficPolicyCommentOutput, error)

UpdateTrafficPolicyCommentWithContext is the same as UpdateTrafficPolicyComment with the addition of the ability to pass a context and additional request options.

See UpdateTrafficPolicyComment for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) UpdateTrafficPolicyInstance

func (c *Route53) UpdateTrafficPolicyInstance(input *UpdateTrafficPolicyInstanceInput) (*UpdateTrafficPolicyInstanceOutput, error)

UpdateTrafficPolicyInstance API operation for Amazon Route 53.

Updates the resource record sets in a specified hosted zone that were created based on the settings in a specified traffic policy version.

When you update a traffic policy instance, Amazon Route 53 continues to respond to DNS queries for the root resource record set name (such as example.com) while it replaces one group of resource record sets with another. Amazon Route 53 performs the following operations:

Amazon Route 53 creates a new group of resource record sets based on the specified traffic policy. This is true regardless of how significant the differences are between the existing resource record sets and the new resource record sets.

When all of the new resource record sets have been created, Amazon Route 53 starts to respond to DNS queries for the root resource record set name (such as example.com) by using the new resource record sets.

Amazon Route 53 deletes the old group of resource record sets that are associated with the root resource record set name.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for Amazon Route 53's API operation UpdateTrafficPolicyInstance for usage and error information.

Returned Error Codes:

  • ErrCodeInvalidInput "InvalidInput" The input is not valid.

  • ErrCodeNoSuchTrafficPolicy "NoSuchTrafficPolicy" No traffic policy exists with the specified ID.

  • ErrCodeNoSuchTrafficPolicyInstance "NoSuchTrafficPolicyInstance" No traffic policy instance exists with the specified ID.

  • ErrCodePriorRequestNotComplete "PriorRequestNotComplete" If Amazon Route 53 can't process a request before the next request arrives, it will reject subsequent requests for the same hosted zone and return an HTTP 400 error (Bad request). If Amazon Route 53 returns this error repeatedly for the same request, we recommend that you wait, in intervals of increasing duration, before you try the request again.

  • ErrCodeConflictingTypes "ConflictingTypes" You tried to update a traffic policy instance by using a traffic policy version that has a different DNS type than the current type for the instance. You specified the type in the JSON document in the CreateTrafficPolicy or CreateTrafficPolicyVersionrequest.

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateTrafficPolicyInstance

func (*Route53) UpdateTrafficPolicyInstanceRequest

func (c *Route53) UpdateTrafficPolicyInstanceRequest(input *UpdateTrafficPolicyInstanceInput) (req *request.Request, output *UpdateTrafficPolicyInstanceOutput)

UpdateTrafficPolicyInstanceRequest generates a "aws/request.Request" representing the client's request for the UpdateTrafficPolicyInstance operation. The "output" return value will be populated with the request's response once the request complets successfuly.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See UpdateTrafficPolicyInstance for more information on using the UpdateTrafficPolicyInstance API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the UpdateTrafficPolicyInstanceRequest method.
req, resp := client.UpdateTrafficPolicyInstanceRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateTrafficPolicyInstance

func (*Route53) UpdateTrafficPolicyInstanceWithContext

func (c *Route53) UpdateTrafficPolicyInstanceWithContext(ctx aws.Context, input *UpdateTrafficPolicyInstanceInput, opts ...request.Option) (*UpdateTrafficPolicyInstanceOutput, error)

UpdateTrafficPolicyInstanceWithContext is the same as UpdateTrafficPolicyInstance with the addition of the ability to pass a context and additional request options.

See UpdateTrafficPolicyInstance for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Route53) WaitUntilResourceRecordSetsChanged

func (c *Route53) WaitUntilResourceRecordSetsChanged(input *GetChangeInput) error

WaitUntilResourceRecordSetsChanged uses the Route 53 API operation GetChange to wait for a condition to be met before returning. If the condition is not met within the max attempt window, an error will be returned.

func (*Route53) WaitUntilResourceRecordSetsChangedWithContext

func (c *Route53) WaitUntilResourceRecordSetsChangedWithContext(ctx aws.Context, input *GetChangeInput, opts ...request.WaiterOption) error

WaitUntilResourceRecordSetsChangedWithContext is an extended version of WaitUntilResourceRecordSetsChanged. With the support for passing in a context and options to configure the Waiter and the underlying request options.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

type StatusReport

type StatusReport struct {

	// The date and time that the health checker performed the health check in ISO
	// 8601 format (https://en.wikipedia.org/wiki/ISO_8601) and Coordinated Universal
	// Time (UTC). For example, the value 2017-03-27T17:48:16.751Z represents March
	// 27, 2017 at 17:48:16.751 UTC.
	CheckedTime *time.Time `type:"timestamp" timestampFormat:"iso8601"`

	// A description of the status of the health check endpoint as reported by one
	// of the Amazon Route 53 health checkers.
	Status *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains the status that one Amazon Route 53 health checker reports and the time of the health check. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/StatusReport

func (StatusReport) GoString

func (s StatusReport) GoString() string

GoString returns the string representation

func (*StatusReport) MarshalFields

func (s *StatusReport) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*StatusReport) SetCheckedTime

func (s *StatusReport) SetCheckedTime(v time.Time) *StatusReport

SetCheckedTime sets the CheckedTime field's value.

func (*StatusReport) SetStatus

func (s *StatusReport) SetStatus(v string) *StatusReport

SetStatus sets the Status field's value.

func (StatusReport) String

func (s StatusReport) String() string

String returns the string representation

type Tag

type Tag struct {

	// The value of Key depends on the operation that you want to perform:
	//
	//    * Add a tag to a health check or hosted zone: Key is the name that you
	//    want to give the new tag.
	//
	//    * Edit a tag: Key is the name of the tag that you want to change the Value
	//    for.
	//
	//    *  Delete a key: Key is the name of the tag you want to remove.
	//
	//    * Give a name to a health check: Edit the default Name tag. In the Amazon
	//    Route 53 console, the list of your health checks includes a Name column
	//    that lets you see the name that you've given to each health check.
	Key *string `type:"string"`

	// The value of Value depends on the operation that you want to perform:
	//
	//    * Add a tag to a health check or hosted zone: Value is the value that
	//    you want to give the new tag.
	//
	//    * Edit a tag: Value is the new value that you want to assign the tag.
	Value *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about a tag that you want to add or edit for the specified health check or hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/Tag

func (Tag) GoString

func (s Tag) GoString() string

GoString returns the string representation

func (*Tag) MarshalFields

func (s *Tag) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*Tag) SetKey

func (s *Tag) SetKey(v string) *Tag

SetKey sets the Key field's value.

func (*Tag) SetValue

func (s *Tag) SetValue(v string) *Tag

SetValue sets the Value field's value.

func (Tag) String

func (s Tag) String() string

String returns the string representation

type TestDNSAnswerInput

type TestDNSAnswerInput struct {

	// If the resolver that you specified for resolverip supports EDNS0, specify
	// the IPv4 or IPv6 address of a client in the applicable location, for example,
	// 192.0.2.44 or 2001:db8:85a3::8a2e:370:7334.
	EDNS0ClientSubnetIP *string `location:"querystring" locationName:"edns0clientsubnetip" type:"string"`

	// If you specify an IP address for edns0clientsubnetip, you can optionally
	// specify the number of bits of the IP address that you want the checking tool
	// to include in the DNS query. For example, if you specify 192.0.2.44 for edns0clientsubnetip
	// and 24 for edns0clientsubnetmask, the checking tool will simulate a request
	// from 192.0.2.0/24. The default value is 24 bits for IPv4 addresses and 64
	// bits for IPv6 addresses.
	EDNS0ClientSubnetMask *string `location:"querystring" locationName:"edns0clientsubnetmask" type:"string"`

	// The ID of the hosted zone that you want Amazon Route 53 to simulate a query
	// for.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `location:"querystring" locationName:"hostedzoneid" type:"string" required:"true"`

	// The name of the resource record set that you want Amazon Route 53 to simulate
	// a query for.
	//
	// RecordName is a required field
	RecordName *string `location:"querystring" locationName:"recordname" type:"string" required:"true"`

	// The type of the resource record set.
	//
	// RecordType is a required field
	RecordType *string `location:"querystring" locationName:"recordtype" type:"string" required:"true" enum:"RRType"`

	// If you want to simulate a request from a specific DNS resolver, specify the
	// IP address for that resolver. If you omit this value, TestDnsAnswer uses
	// the IP address of a DNS resolver in the AWS US East (N. Virginia) Region
	// (us-east-1).
	ResolverIP *string `location:"querystring" locationName:"resolverip" type:"string"`
	// contains filtered or unexported fields
}

Gets the value that Amazon Route 53 returns in response to a DNS request for a specified record name and type. You can optionally specify the IP address of a DNS resolver, an EDNS0 client subnet IP address, and a subnet mask. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/TestDNSAnswerRequest

func (TestDNSAnswerInput) GoString

func (s TestDNSAnswerInput) GoString() string

GoString returns the string representation

func (*TestDNSAnswerInput) MarshalFields

func (s *TestDNSAnswerInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*TestDNSAnswerInput) SetEDNS0ClientSubnetIP

func (s *TestDNSAnswerInput) SetEDNS0ClientSubnetIP(v string) *TestDNSAnswerInput

SetEDNS0ClientSubnetIP sets the EDNS0ClientSubnetIP field's value.

func (*TestDNSAnswerInput) SetEDNS0ClientSubnetMask

func (s *TestDNSAnswerInput) SetEDNS0ClientSubnetMask(v string) *TestDNSAnswerInput

SetEDNS0ClientSubnetMask sets the EDNS0ClientSubnetMask field's value.

func (*TestDNSAnswerInput) SetHostedZoneId

func (s *TestDNSAnswerInput) SetHostedZoneId(v string) *TestDNSAnswerInput

SetHostedZoneId sets the HostedZoneId field's value.

func (*TestDNSAnswerInput) SetRecordName

func (s *TestDNSAnswerInput) SetRecordName(v string) *TestDNSAnswerInput

SetRecordName sets the RecordName field's value.

func (*TestDNSAnswerInput) SetRecordType

func (s *TestDNSAnswerInput) SetRecordType(v string) *TestDNSAnswerInput

SetRecordType sets the RecordType field's value.

func (*TestDNSAnswerInput) SetResolverIP

func (s *TestDNSAnswerInput) SetResolverIP(v string) *TestDNSAnswerInput

SetResolverIP sets the ResolverIP field's value.

func (TestDNSAnswerInput) String

func (s TestDNSAnswerInput) String() string

String returns the string representation

func (*TestDNSAnswerInput) Validate

func (s *TestDNSAnswerInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type TestDNSAnswerOutput

type TestDNSAnswerOutput struct {

	// The Amazon Route 53 name server used to respond to the request.
	//
	// Nameserver is a required field
	Nameserver *string `type:"string" required:"true"`

	// The protocol that Amazon Route 53 used to respond to the request, either
	// UDP or TCP.
	//
	// Protocol is a required field
	Protocol *string `type:"string" required:"true"`

	// A list that contains values that Amazon Route 53 returned for this resource
	// record set.
	//
	// RecordData is a required field
	RecordData []*string `locationNameList:"RecordDataEntry" type:"list" required:"true"`

	// The name of the resource record set that you submitted a request for.
	//
	// RecordName is a required field
	RecordName *string `type:"string" required:"true"`

	// The type of the resource record set that you submitted a request for.
	//
	// RecordType is a required field
	RecordType *string `type:"string" required:"true" enum:"RRType"`

	// A code that indicates whether the request is valid or not. The most common
	// response code is NOERROR, meaning that the request is valid. If the response
	// is not valid, Amazon Route 53 returns a response code that describes the
	// error. For a list of possible response codes, see DNS RCODES (http://www.iana.org/assignments/dns-parameters/dns-parameters.xhtml#dns-parameters-6)
	// on the IANA website.
	//
	// ResponseCode is a required field
	ResponseCode *string `type:"string" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to a TestDNSAnswer request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/TestDNSAnswerResponse

func (TestDNSAnswerOutput) GoString

func (s TestDNSAnswerOutput) GoString() string

GoString returns the string representation

func (*TestDNSAnswerOutput) MarshalFields

func (s *TestDNSAnswerOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*TestDNSAnswerOutput) SetNameserver

func (s *TestDNSAnswerOutput) SetNameserver(v string) *TestDNSAnswerOutput

SetNameserver sets the Nameserver field's value.

func (*TestDNSAnswerOutput) SetProtocol

func (s *TestDNSAnswerOutput) SetProtocol(v string) *TestDNSAnswerOutput

SetProtocol sets the Protocol field's value.

func (*TestDNSAnswerOutput) SetRecordData

func (s *TestDNSAnswerOutput) SetRecordData(v []*string) *TestDNSAnswerOutput

SetRecordData sets the RecordData field's value.

func (*TestDNSAnswerOutput) SetRecordName

func (s *TestDNSAnswerOutput) SetRecordName(v string) *TestDNSAnswerOutput

SetRecordName sets the RecordName field's value.

func (*TestDNSAnswerOutput) SetRecordType

func (s *TestDNSAnswerOutput) SetRecordType(v string) *TestDNSAnswerOutput

SetRecordType sets the RecordType field's value.

func (*TestDNSAnswerOutput) SetResponseCode

func (s *TestDNSAnswerOutput) SetResponseCode(v string) *TestDNSAnswerOutput

SetResponseCode sets the ResponseCode field's value.

func (TestDNSAnswerOutput) String

func (s TestDNSAnswerOutput) String() string

String returns the string representation

type TrafficPolicy

type TrafficPolicy struct {

	// The comment that you specify in the CreateTrafficPolicy request, if any.
	Comment *string `type:"string"`

	// The definition of a traffic policy in JSON format. You specify the JSON document
	// to use for a new traffic policy in the CreateTrafficPolicy request. For more
	// information about the JSON format, see Traffic Policy Document Format (http://docs.aws.amazon.com/Route53/latest/APIReference/api-policies-traffic-policy-document-format.html).
	//
	// Document is a required field
	Document *string `type:"string" required:"true"`

	// The ID that Amazon Route 53 assigned to a traffic policy when you created
	// it.
	//
	// Id is a required field
	Id *string `min:"1" type:"string" required:"true"`

	// The name that you specified when you created the traffic policy.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The DNS type of the resource record sets that Amazon Route 53 creates when
	// you use a traffic policy to create a traffic policy instance.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"RRType"`

	// The version number that Amazon Route 53 assigns to a traffic policy. For
	// a new traffic policy, the value of Version is always 1.
	//
	// Version is a required field
	Version *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains settings for a traffic policy. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/TrafficPolicy

func (TrafficPolicy) GoString

func (s TrafficPolicy) GoString() string

GoString returns the string representation

func (*TrafficPolicy) MarshalFields

func (s *TrafficPolicy) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*TrafficPolicy) SetComment

func (s *TrafficPolicy) SetComment(v string) *TrafficPolicy

SetComment sets the Comment field's value.

func (*TrafficPolicy) SetDocument

func (s *TrafficPolicy) SetDocument(v string) *TrafficPolicy

SetDocument sets the Document field's value.

func (*TrafficPolicy) SetId

func (s *TrafficPolicy) SetId(v string) *TrafficPolicy

SetId sets the Id field's value.

func (*TrafficPolicy) SetName

func (s *TrafficPolicy) SetName(v string) *TrafficPolicy

SetName sets the Name field's value.

func (*TrafficPolicy) SetType

func (s *TrafficPolicy) SetType(v string) *TrafficPolicy

SetType sets the Type field's value.

func (*TrafficPolicy) SetVersion

func (s *TrafficPolicy) SetVersion(v int64) *TrafficPolicy

SetVersion sets the Version field's value.

func (TrafficPolicy) String

func (s TrafficPolicy) String() string

String returns the string representation

type TrafficPolicyInstance

type TrafficPolicyInstance struct {

	// The ID of the hosted zone that Amazon Route 53 created resource record sets
	// in.
	//
	// HostedZoneId is a required field
	HostedZoneId *string `type:"string" required:"true"`

	// The ID that Amazon Route 53 assigned to the new traffic policy instance.
	//
	// Id is a required field
	Id *string `min:"1" type:"string" required:"true"`

	// If State is Failed, an explanation of the reason for the failure. If State
	// is another value, Message is empty.
	//
	// Message is a required field
	Message *string `type:"string" required:"true"`

	// The DNS name, such as www.example.com, for which Amazon Route 53 responds
	// to queries by using the resource record sets that are associated with this
	// traffic policy instance.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The value of State is one of the following values:
	//
	// AppliedAmazon Route 53 has finished creating resource record sets, and changes
	// have propagated to all Amazon Route 53 edge locations.
	//
	// CreatingAmazon Route 53 is creating the resource record sets. Use GetTrafficPolicyInstance
	// to confirm that the CreateTrafficPolicyInstance request completed successfully.
	//
	// FailedAmazon Route 53 wasn't able to create or update the resource record
	// sets. When the value of State is Failed, see Message for an explanation of
	// what caused the request to fail.
	//
	// State is a required field
	State *string `type:"string" required:"true"`

	// The TTL that Amazon Route 53 assigned to all of the resource record sets
	// that it created in the specified hosted zone.
	//
	// TTL is a required field
	TTL *int64 `type:"long" required:"true"`

	// The ID of the traffic policy that Amazon Route 53 used to create resource
	// record sets in the specified hosted zone.
	//
	// TrafficPolicyId is a required field
	TrafficPolicyId *string `min:"1" type:"string" required:"true"`

	// The DNS type that Amazon Route 53 assigned to all of the resource record
	// sets that it created for this traffic policy instance.
	//
	// TrafficPolicyType is a required field
	TrafficPolicyType *string `type:"string" required:"true" enum:"RRType"`

	// The version of the traffic policy that Amazon Route 53 used to create resource
	// record sets in the specified hosted zone.
	//
	// TrafficPolicyVersion is a required field
	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains settings for the new traffic policy instance. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/TrafficPolicyInstance

func (TrafficPolicyInstance) GoString

func (s TrafficPolicyInstance) GoString() string

GoString returns the string representation

func (*TrafficPolicyInstance) MarshalFields

func (s *TrafficPolicyInstance) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*TrafficPolicyInstance) SetHostedZoneId

func (s *TrafficPolicyInstance) SetHostedZoneId(v string) *TrafficPolicyInstance

SetHostedZoneId sets the HostedZoneId field's value.

func (*TrafficPolicyInstance) SetId

SetId sets the Id field's value.

func (*TrafficPolicyInstance) SetMessage

SetMessage sets the Message field's value.

func (*TrafficPolicyInstance) SetName

SetName sets the Name field's value.

func (*TrafficPolicyInstance) SetState

SetState sets the State field's value.

func (*TrafficPolicyInstance) SetTTL

SetTTL sets the TTL field's value.

func (*TrafficPolicyInstance) SetTrafficPolicyId

func (s *TrafficPolicyInstance) SetTrafficPolicyId(v string) *TrafficPolicyInstance

SetTrafficPolicyId sets the TrafficPolicyId field's value.

func (*TrafficPolicyInstance) SetTrafficPolicyType

func (s *TrafficPolicyInstance) SetTrafficPolicyType(v string) *TrafficPolicyInstance

SetTrafficPolicyType sets the TrafficPolicyType field's value.

func (*TrafficPolicyInstance) SetTrafficPolicyVersion

func (s *TrafficPolicyInstance) SetTrafficPolicyVersion(v int64) *TrafficPolicyInstance

SetTrafficPolicyVersion sets the TrafficPolicyVersion field's value.

func (TrafficPolicyInstance) String

func (s TrafficPolicyInstance) String() string

String returns the string representation

type TrafficPolicySummary

type TrafficPolicySummary struct {

	// The ID that Amazon Route 53 assigned to the traffic policy when you created
	// it.
	//
	// Id is a required field
	Id *string `min:"1" type:"string" required:"true"`

	// The version number of the latest version of the traffic policy.
	//
	// LatestVersion is a required field
	LatestVersion *int64 `min:"1" type:"integer" required:"true"`

	// The name that you specified for the traffic policy when you created it.
	//
	// Name is a required field
	Name *string `type:"string" required:"true"`

	// The number of traffic policies that are associated with the current AWS account.
	//
	// TrafficPolicyCount is a required field
	TrafficPolicyCount *int64 `min:"1" type:"integer" required:"true"`

	// The DNS type of the resource record sets that Amazon Route 53 creates when
	// you use a traffic policy to create a traffic policy instance.
	//
	// Type is a required field
	Type *string `type:"string" required:"true" enum:"RRType"`
	// contains filtered or unexported fields
}

A complex type that contains information about the latest version of one traffic policy that is associated with the current AWS account. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/TrafficPolicySummary

func (TrafficPolicySummary) GoString

func (s TrafficPolicySummary) GoString() string

GoString returns the string representation

func (*TrafficPolicySummary) MarshalFields

func (s *TrafficPolicySummary) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*TrafficPolicySummary) SetId

SetId sets the Id field's value.

func (*TrafficPolicySummary) SetLatestVersion

func (s *TrafficPolicySummary) SetLatestVersion(v int64) *TrafficPolicySummary

SetLatestVersion sets the LatestVersion field's value.

func (*TrafficPolicySummary) SetName

SetName sets the Name field's value.

func (*TrafficPolicySummary) SetTrafficPolicyCount

func (s *TrafficPolicySummary) SetTrafficPolicyCount(v int64) *TrafficPolicySummary

SetTrafficPolicyCount sets the TrafficPolicyCount field's value.

func (*TrafficPolicySummary) SetType

SetType sets the Type field's value.

func (TrafficPolicySummary) String

func (s TrafficPolicySummary) String() string

String returns the string representation

type UpdateHealthCheckInput

type UpdateHealthCheckInput struct {

	// A complex type that identifies the CloudWatch alarm that you want Amazon
	// Route 53 health checkers to use to determine whether this health check is
	// healthy.
	AlarmIdentifier *AlarmIdentifier `type:"structure"`

	// A complex type that contains one ChildHealthCheck element for each health
	// check that you want to associate with a CALCULATED health check.
	ChildHealthChecks []*string `locationNameList:"ChildHealthCheck" type:"list"`

	// Specify whether you want Amazon Route 53 to send the value of FullyQualifiedDomainName
	// to the endpoint in the client_hello message during TLS negotiation. This
	// allows the endpoint to respond to HTTPS health check requests with the applicable
	// SSL/TLS certificate.
	//
	// Some endpoints require that HTTPS requests include the host name in the client_hello
	// message. If you don't enable SNI, the status of the health check will be
	// SSL alert handshake_failure. A health check can also have that status for
	// other reasons. If SNI is enabled and you're still getting the error, check
	// the SSL/TLS configuration on your endpoint and confirm that your certificate
	// is valid.
	//
	// The SSL/TLS certificate on your endpoint includes a domain name in the Common
	// Name field and possibly several more in the Subject Alternative Names field.
	// One of the domain names in the certificate should match the value that you
	// specify for FullyQualifiedDomainName. If the endpoint responds to the client_hello
	// message with a certificate that does not include the domain name that you
	// specified in FullyQualifiedDomainName, a health checker will retry the handshake.
	// In the second attempt, the health checker will omit FullyQualifiedDomainName
	// from the client_hello message.
	EnableSNI *bool `type:"boolean"`

	// The number of consecutive health checks that an endpoint must pass or fail
	// for Amazon Route 53 to change the current status of the endpoint from unhealthy
	// to healthy or vice versa. For more information, see How Amazon Route 53 Determines
	// Whether an Endpoint Is Healthy (http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html)
	// in the Amazon Route 53 Developer Guide.
	//
	// If you don't specify a value for FailureThreshold, the default value is three
	// health checks.
	FailureThreshold *int64 `min:"1" type:"integer"`

	// Amazon Route 53 behavior depends on whether you specify a value for IPAddress.
	//
	// If a health check already has a value for IPAddress, you can change the value.
	// However, you can't update an existing health check to add or remove the value
	// of IPAddress.
	//
	// If you specify a value forIPAddress:
	//
	// Amazon Route 53 sends health check requests to the specified IPv4 or IPv6
	// address and passes the value of FullyQualifiedDomainName in the Host header
	// for all health checks except TCP health checks. This is typically the fully
	// qualified DNS name of the endpoint on which you want Amazon Route 53 to perform
	// health checks.
	//
	// When Amazon Route 53 checks the health of an endpoint, here is how it constructs
	// the Host header:
	//
	//    * If you specify a value of 80 for Port and HTTP or HTTP_STR_MATCH for
	//    Type, Amazon Route 53 passes the value of FullyQualifiedDomainName to
	//    the endpoint in the Host header.
	//
	//    * If you specify a value of 443 for Port and HTTPS or HTTPS_STR_MATCH
	//    for Type, Amazon Route 53 passes the value of FullyQualifiedDomainName
	//    to the endpoint in the Host header.
	//
	//    * If you specify another value for Port and any value except TCP for Type,
	//    Amazon Route 53 passes FullyQualifiedDomainName:Port to the endpoint in
	//    the Host header.
	//
	// If you don't specify a value for FullyQualifiedDomainName, Amazon Route 53
	// substitutes the value of IPAddress in the Host header in each of the above
	// cases.
	//
	// If you don't specify a value forIPAddress:
	//
	// If you don't specify a value for IPAddress, Amazon Route 53 sends a DNS request
	// to the domain that you specify in FullyQualifiedDomainName at the interval
	// you specify in RequestInterval. Using an IPv4 address that is returned by
	// DNS, Amazon Route 53 then checks the health of the endpoint.
	//
	// If you don't specify a value for IPAddress, Amazon Route 53 uses only IPv4
	// to send health checks to the endpoint. If there's no resource record set
	// with a type of A for the name that you specify for FullyQualifiedDomainName,
	// the health check fails with a "DNS resolution failed" error.
	//
	// If you want to check the health of weighted, latency, or failover resource
	// record sets and you choose to specify the endpoint only by FullyQualifiedDomainName,
	// we recommend that you create a separate health check for each endpoint. For
	// example, create a health check for each HTTP server that is serving content
	// for www.example.com. For the value of FullyQualifiedDomainName, specify the
	// domain name of the server (such as us-east-2-www.example.com), not the name
	// of the resource record sets (www.example.com).
	//
	// In this configuration, if the value of FullyQualifiedDomainName matches the
	// name of the resource record sets and you then associate the health check
	// with those resource record sets, health check results will be unpredictable.
	//
	// In addition, if the value of Type is HTTP, HTTPS, HTTP_STR_MATCH, or HTTPS_STR_MATCH,
	// Amazon Route 53 passes the value of FullyQualifiedDomainName in the Host
	// header, as it does when you specify a value for IPAddress. If the value of
	// Type is TCP, Amazon Route 53 doesn't pass a Host header.
	FullyQualifiedDomainName *string `type:"string"`

	// The ID for the health check for which you want detailed information. When
	// you created the health check, CreateHealthCheck returned the ID in the response,
	// in the HealthCheckId element.
	//
	// HealthCheckId is a required field
	HealthCheckId *string `location:"uri" locationName:"HealthCheckId" type:"string" required:"true"`

	// A sequential counter that Amazon Route 53 sets to 1 when you create a health
	// check and increments by 1 each time you update settings for the health check.
	//
	// We recommend that you use GetHealthCheck or ListHealthChecks to get the current
	// value of HealthCheckVersion for the health check that you want to update,
	// and that you include that value in your UpdateHealthCheck request. This prevents
	// Amazon Route 53 from overwriting an intervening update:
	//
	//    * If the value in the UpdateHealthCheck request matches the value of HealthCheckVersion
	//    in the health check, Amazon Route 53 updates the health check with the
	//    new settings.
	//
	//    * If the value of HealthCheckVersion in the health check is greater, the
	//    health check was changed after you got the version number. Amazon Route
	//    53 does not update the health check, and it returns a HealthCheckVersionMismatch
	//    error.
	HealthCheckVersion *int64 `min:"1" type:"long"`

	// The number of child health checks that are associated with a CALCULATED health
	// that Amazon Route 53 must consider healthy for the CALCULATED health check
	// to be considered healthy. To specify the child health checks that you want
	// to associate with a CALCULATED health check, use the ChildHealthChecks and
	// ChildHealthCheck elements.
	//
	// Note the following:
	//
	//    * If you specify a number greater than the number of child health checks,
	//    Amazon Route 53 always considers this health check to be unhealthy.
	//
	//    * If you specify 0, Amazon Route 53 always considers this health check
	//    to be healthy.
	HealthThreshold *int64 `type:"integer"`

	// The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53
	// to perform health checks on. If you don't specify a value for IPAddress,
	// Amazon Route 53 sends a DNS request to resolve the domain name that you specify
	// in FullyQualifiedDomainName at the interval that you specify in RequestInterval.
	// Using an IP address that is returned by DNS, Amazon Route 53 then checks
	// the health of the endpoint.
	//
	// Use one of the following formats for the value of IPAddress:
	//
	//    * IPv4 address: four values between 0 and 255, separated by periods (.),
	//    for example, 192.0.2.44.
	//
	//    * IPv6 address: eight groups of four hexadecimal values, separated by
	//    colons (:), for example, 2001:0db8:85a3:0000:0000:abcd:0001:2345. You
	//    can also shorten IPv6 addresses as described in RFC 5952, for example,
	//    2001:db8:85a3::abcd:1:2345.
	//
	// If the endpoint is an EC2 instance, we recommend that you create an Elastic
	// IP address, associate it with your EC2 instance, and specify the Elastic
	// IP address for IPAddress. This ensures that the IP address of your instance
	// never changes. For more information, see the applicable documentation:
	//
	//    * Linux: Elastic IP Addresses (EIP) (http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html)
	//    in the Amazon EC2 User Guide for Linux Instances
	//
	//    * Windows: Elastic IP Addresses (EIP) (http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html)
	//    in the Amazon EC2 User Guide for Windows Instances
	//
	// If a health check already has a value for IPAddress, you can change the value.
	// However, you can't update an existing health check to add or remove the value
	// of IPAddress.
	//
	// For more information, see UpdateHealthCheckRequest$FullyQualifiedDomainName.
	//
	// Constraints: Amazon Route 53 can't check the health of endpoints for which
	// the IP address is in local, private, non-routable, or multicast ranges. For
	// more information about IP addresses for which you can't create health checks,
	// see the following documents:
	//
	//    * RFC 5735, Special Use IPv4 Addresses (https://tools.ietf.org/html/rfc5735)
	//
	//    * RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space (https://tools.ietf.org/html/rfc6598)
	//
	//    * RFC 5156, Special-Use IPv6 Addresses (https://tools.ietf.org/html/rfc5156)
	IPAddress *string `type:"string"`

	// When CloudWatch has insufficient data about the metric to determine the alarm
	// state, the status that you want Amazon Route 53 to assign to the health check:
	//
	//    * Healthy: Amazon Route 53 considers the health check to be healthy.
	//
	//    * Unhealthy: Amazon Route 53 considers the health check to be unhealthy.
	//
	//    * LastKnownStatus: Amazon Route 53 uses the status of the health check
	//    from the last time CloudWatch had sufficient data to determine the alarm
	//    state. For new health checks that have no last known status, the default
	//    status for the health check is healthy.
	InsufficientDataHealthStatus *string `type:"string" enum:"InsufficientDataHealthStatus"`

	// Specify whether you want Amazon Route 53 to invert the status of a health
	// check, for example, to consider a health check unhealthy when it otherwise
	// would be considered healthy.
	Inverted *bool `type:"boolean"`

	// The port on the endpoint on which you want Amazon Route 53 to perform health
	// checks.
	Port *int64 `min:"1" type:"integer"`

	// A complex type that contains one Region element for each region that you
	// want Amazon Route 53 health checkers to check the specified endpoint from.
	Regions []*string `locationNameList:"Region" min:"3" type:"list"`

	// The path that you want Amazon Route 53 to request when performing health
	// checks. The path can be any value for which your endpoint will return an
	// HTTP status code of 2xx or 3xx when the endpoint is healthy, for example
	// the file /docs/route53-health-check.html.
	//
	// Specify this value only if you want to change it.
	ResourcePath *string `type:"string"`

	// If the value of Type is HTTP_STR_MATCH or HTTP_STR_MATCH, the string that
	// you want Amazon Route 53 to search for in the response body from the specified
	// resource. If the string appears in the response body, Amazon Route 53 considers
	// the resource healthy. (You can't change the value of Type when you update
	// a health check.)
	SearchString *string `type:"string"`
	// contains filtered or unexported fields
}

A complex type that contains information about a request to update a health check. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHealthCheckRequest

func (UpdateHealthCheckInput) GoString

func (s UpdateHealthCheckInput) GoString() string

GoString returns the string representation

func (*UpdateHealthCheckInput) MarshalFields

func (s *UpdateHealthCheckInput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*UpdateHealthCheckInput) SetAlarmIdentifier

SetAlarmIdentifier sets the AlarmIdentifier field's value.

func (*UpdateHealthCheckInput) SetChildHealthChecks

func (s *UpdateHealthCheckInput) SetChildHealthChecks(v []*string) *UpdateHealthCheckInput

SetChildHealthChecks sets the ChildHealthChecks field's value.

func (*UpdateHealthCheckInput) SetEnableSNI

SetEnableSNI sets the EnableSNI field's value.

func (*UpdateHealthCheckInput) SetFailureThreshold

func (s *UpdateHealthCheckInput) SetFailureThreshold(v int64) *UpdateHealthCheckInput

SetFailureThreshold sets the FailureThreshold field's value.

func (*UpdateHealthCheckInput) SetFullyQualifiedDomainName

func (s *UpdateHealthCheckInput) SetFullyQualifiedDomainName(v string) *UpdateHealthCheckInput

SetFullyQualifiedDomainName sets the FullyQualifiedDomainName field's value.

func (*UpdateHealthCheckInput) SetHealthCheckId

func (s *UpdateHealthCheckInput) SetHealthCheckId(v string) *UpdateHealthCheckInput

SetHealthCheckId sets the HealthCheckId field's value.

func (*UpdateHealthCheckInput) SetHealthCheckVersion

func (s *UpdateHealthCheckInput) SetHealthCheckVersion(v int64) *UpdateHealthCheckInput

SetHealthCheckVersion sets the HealthCheckVersion field's value.

func (*UpdateHealthCheckInput) SetHealthThreshold

func (s *UpdateHealthCheckInput) SetHealthThreshold(v int64) *UpdateHealthCheckInput

SetHealthThreshold sets the HealthThreshold field's value.

func (*UpdateHealthCheckInput) SetIPAddress

SetIPAddress sets the IPAddress field's value.

func (*UpdateHealthCheckInput) SetInsufficientDataHealthStatus

func (s *UpdateHealthCheckInput) SetInsufficientDataHealthStatus(v string) *UpdateHealthCheckInput

SetInsufficientDataHealthStatus sets the InsufficientDataHealthStatus field's value.

func (*UpdateHealthCheckInput) SetInverted

SetInverted sets the Inverted field's value.

func (*UpdateHealthCheckInput) SetPort

SetPort sets the Port field's value.

func (*UpdateHealthCheckInput) SetRegions

SetRegions sets the Regions field's value.

func (*UpdateHealthCheckInput) SetResourcePath

func (s *UpdateHealthCheckInput) SetResourcePath(v string) *UpdateHealthCheckInput

SetResourcePath sets the ResourcePath field's value.

func (*UpdateHealthCheckInput) SetSearchString

func (s *UpdateHealthCheckInput) SetSearchString(v string) *UpdateHealthCheckInput

SetSearchString sets the SearchString field's value.

func (UpdateHealthCheckInput) String

func (s UpdateHealthCheckInput) String() string

String returns the string representation

func (*UpdateHealthCheckInput) Validate

func (s *UpdateHealthCheckInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateHealthCheckOutput

type UpdateHealthCheckOutput struct {

	// A complex type that contains information about one health check that is associated
	// with the current AWS account.
	//
	// HealthCheck is a required field
	HealthCheck *HealthCheck `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHealthCheckResponse

func (UpdateHealthCheckOutput) GoString

func (s UpdateHealthCheckOutput) GoString() string

GoString returns the string representation

func (*UpdateHealthCheckOutput) MarshalFields

func (s *UpdateHealthCheckOutput) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*UpdateHealthCheckOutput) SetHealthCheck

SetHealthCheck sets the HealthCheck field's value.

func (UpdateHealthCheckOutput) String

func (s UpdateHealthCheckOutput) String() string

String returns the string representation

type UpdateHostedZoneCommentInput

type UpdateHostedZoneCommentInput struct {

	// The new comment for the hosted zone. If you don't specify a value for Comment,
	// Amazon Route 53 deletes the existing value of the Comment element, if any.
	Comment *string `type:"string"`

	// The ID for the hosted zone that you want to update the comment for.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" type:"string" required:"true"`
	// contains filtered or unexported fields
}

A request to update the comment for a hosted zone. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHostedZoneCommentRequest

func (UpdateHostedZoneCommentInput) GoString

func (s UpdateHostedZoneCommentInput) GoString() string

GoString returns the string representation

func (*UpdateHostedZoneCommentInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*UpdateHostedZoneCommentInput) SetComment

SetComment sets the Comment field's value.

func (*UpdateHostedZoneCommentInput) SetId

SetId sets the Id field's value.

func (UpdateHostedZoneCommentInput) String

String returns the string representation

func (*UpdateHostedZoneCommentInput) Validate

func (s *UpdateHostedZoneCommentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateHostedZoneCommentOutput

type UpdateHostedZoneCommentOutput struct {

	// A complex type that contains general information about the hosted zone.
	//
	// HostedZone is a required field
	HostedZone *HostedZone `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response to the UpdateHostedZoneComment request. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHostedZoneCommentResponse

func (UpdateHostedZoneCommentOutput) GoString

GoString returns the string representation

func (*UpdateHostedZoneCommentOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*UpdateHostedZoneCommentOutput) SetHostedZone

SetHostedZone sets the HostedZone field's value.

func (UpdateHostedZoneCommentOutput) String

String returns the string representation

type UpdateTrafficPolicyCommentInput

type UpdateTrafficPolicyCommentInput struct {

	// The new comment for the specified traffic policy and version.
	//
	// Comment is a required field
	Comment *string `type:"string" required:"true"`

	// The value of Id for the traffic policy that you want to update the comment
	// for.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`

	// The value of Version for the traffic policy that you want to update the comment
	// for.
	//
	// Version is a required field
	Version *int64 `location:"uri" locationName:"Version" min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the traffic policy that you want to update the comment for. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateTrafficPolicyCommentRequest

func (UpdateTrafficPolicyCommentInput) GoString

GoString returns the string representation

func (*UpdateTrafficPolicyCommentInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*UpdateTrafficPolicyCommentInput) SetComment

SetComment sets the Comment field's value.

func (*UpdateTrafficPolicyCommentInput) SetId

SetId sets the Id field's value.

func (*UpdateTrafficPolicyCommentInput) SetVersion

SetVersion sets the Version field's value.

func (UpdateTrafficPolicyCommentInput) String

String returns the string representation

func (*UpdateTrafficPolicyCommentInput) Validate

func (s *UpdateTrafficPolicyCommentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type UpdateTrafficPolicyCommentOutput

type UpdateTrafficPolicyCommentOutput struct {

	// A complex type that contains settings for the specified traffic policy.
	//
	// TrafficPolicy is a required field
	TrafficPolicy *TrafficPolicy `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains the response information for the traffic policy. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateTrafficPolicyCommentResponse

func (UpdateTrafficPolicyCommentOutput) GoString

GoString returns the string representation

func (*UpdateTrafficPolicyCommentOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*UpdateTrafficPolicyCommentOutput) SetTrafficPolicy

SetTrafficPolicy sets the TrafficPolicy field's value.

func (UpdateTrafficPolicyCommentOutput) String

String returns the string representation

type UpdateTrafficPolicyInstanceInput

type UpdateTrafficPolicyInstanceInput struct {

	// The ID of the traffic policy instance that you want to update.
	//
	// Id is a required field
	Id *string `location:"uri" locationName:"Id" min:"1" type:"string" required:"true"`

	// The TTL that you want Amazon Route 53 to assign to all of the updated resource
	// record sets.
	//
	// TTL is a required field
	TTL *int64 `type:"long" required:"true"`

	// The ID of the traffic policy that you want Amazon Route 53 to use to update
	// resource record sets for the specified traffic policy instance.
	//
	// TrafficPolicyId is a required field
	TrafficPolicyId *string `min:"1" type:"string" required:"true"`

	// The version of the traffic policy that you want Amazon Route 53 to use to
	// update resource record sets for the specified traffic policy instance.
	//
	// TrafficPolicyVersion is a required field
	TrafficPolicyVersion *int64 `min:"1" type:"integer" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that you want to update based on a specified traffic policy instance. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateTrafficPolicyInstanceRequest

func (UpdateTrafficPolicyInstanceInput) GoString

GoString returns the string representation

func (*UpdateTrafficPolicyInstanceInput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*UpdateTrafficPolicyInstanceInput) SetId

SetId sets the Id field's value.

func (*UpdateTrafficPolicyInstanceInput) SetTTL

SetTTL sets the TTL field's value.

func (*UpdateTrafficPolicyInstanceInput) SetTrafficPolicyId

SetTrafficPolicyId sets the TrafficPolicyId field's value.

func (*UpdateTrafficPolicyInstanceInput) SetTrafficPolicyVersion

SetTrafficPolicyVersion sets the TrafficPolicyVersion field's value.

func (UpdateTrafficPolicyInstanceInput) String

String returns the string representation

func (*UpdateTrafficPolicyInstanceInput) Validate

Validate inspects the fields of the type to determine if they are valid.

type UpdateTrafficPolicyInstanceOutput

type UpdateTrafficPolicyInstanceOutput struct {

	// A complex type that contains settings for the updated traffic policy instance.
	//
	// TrafficPolicyInstance is a required field
	TrafficPolicyInstance *TrafficPolicyInstance `type:"structure" required:"true"`
	// contains filtered or unexported fields
}

A complex type that contains information about the resource record sets that Amazon Route 53 created based on a specified traffic policy. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateTrafficPolicyInstanceResponse

func (UpdateTrafficPolicyInstanceOutput) GoString

GoString returns the string representation

func (*UpdateTrafficPolicyInstanceOutput) MarshalFields

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*UpdateTrafficPolicyInstanceOutput) SetTrafficPolicyInstance

SetTrafficPolicyInstance sets the TrafficPolicyInstance field's value.

func (UpdateTrafficPolicyInstanceOutput) String

String returns the string representation

type VPC

type VPC struct {

	// (Private hosted zones only) The ID of an Amazon VPC.
	VPCId *string `type:"string"`

	// (Private hosted zones only) The region in which you created an Amazon VPC.
	VPCRegion *string `min:"1" type:"string" enum:"VPCRegion"`
	// contains filtered or unexported fields
}

(Private hosted zones only) A complex type that contains information about an Amazon VPC. Please also see https://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/VPC

func (VPC) GoString

func (s VPC) GoString() string

GoString returns the string representation

func (*VPC) MarshalFields

func (s *VPC) MarshalFields(e protocol.FieldEncoder) error

MarshalFields encodes the AWS API shape using the passed in protocol encoder.

func (*VPC) SetVPCId

func (s *VPC) SetVPCId(v string) *VPC

SetVPCId sets the VPCId field's value.

func (*VPC) SetVPCRegion

func (s *VPC) SetVPCRegion(v string) *VPC

SetVPCRegion sets the VPCRegion field's value.

func (VPC) String

func (s VPC) String() string

String returns the string representation

func (*VPC) Validate

func (s *VPC) Validate() error

Validate inspects the fields of the type to determine if they are valid.

Directories

Path Synopsis
Package route53iface provides an interface to enable mocking the Amazon Route 53 service client for testing your code.
Package route53iface provides an interface to enable mocking the Amazon Route 53 service client for testing your code.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL