vpn

package
v3.54.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Apr 24, 2024 License: Apache-2.0 Imports: 7 Imported by: 0

Documentation

Index

Constants

This section is empty.

Variables

This section is empty.

Functions

This section is empty.

Types

type Connection 

type Connection struct {
	pulumi.CustomResourceState

	// Whether to configure routing automatically. Value:
	// - **true**: Automatically configure routes.
	// - **false**: does not automatically configure routes.
	AutoConfigRoute pulumi.BoolPtrOutput `pulumi:"autoConfigRoute"`
	// vpnBgp configuration. See `bgpConfig` below.
	BgpConfig ConnectionBgpConfigOutput `pulumi:"bgpConfig"`
	// The time when the IPsec-VPN connection was created.
	CreateTime pulumi.IntOutput `pulumi:"createTime"`
	// The ID of the customer gateway.
	CustomerGatewayId pulumi.StringPtrOutput `pulumi:"customerGatewayId"`
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrOutput `pulumi:"effectImmediately"`
	// Wether enable Dpd detection.
	EnableDpd pulumi.BoolOutput `pulumi:"enableDpd"`
	// enable nat traversal.
	EnableNatTraversal pulumi.BoolOutput `pulumi:"enableNatTraversal"`
	// Enable tunnel bgp.
	EnableTunnelsBgp pulumi.BoolOutput `pulumi:"enableTunnelsBgp"`
	// Health Check information. See `healthCheckConfig` below.
	HealthCheckConfig ConnectionHealthCheckConfigOutput `pulumi:"healthCheckConfig"`
	// The configuration of Phase 1 negotiations. See `ikeConfig` below.
	IkeConfig ConnectionIkeConfigOutput `pulumi:"ikeConfig"`
	// IPsec configuration. See `ipsecConfig` below.
	IpsecConfig ConnectionIpsecConfigOutput `pulumi:"ipsecConfig"`
	// The CIDR block of the VPC to be connected with the local data center. This parameter is used for phase-two negotiation.
	LocalSubnets pulumi.StringArrayOutput `pulumi:"localSubnets"`
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'vpn_connection_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.216.0. New field 'vpn_connection_name' instead.
	Name pulumi.StringOutput `pulumi:"name"`
	// The network type of the IPsec connection. Value:
	// - **public**: public network, indicating that the IPsec connection establishes an encrypted communication channel through the public network.
	// - **private**: private network, indicating that the IPsec connection establishes an encrypted communication channel through the private network.
	NetworkType pulumi.StringPtrOutput `pulumi:"networkType"`
	// The CIDR block of the local data center. This parameter is used for phase-two negotiation.
	RemoteSubnets pulumi.StringArrayOutput `pulumi:"remoteSubnets"`
	// The ID of the resource group.
	ResourceGroupId pulumi.StringOutput `pulumi:"resourceGroupId"`
	// The negotiation status of Tunnel.
	Status pulumi.StringOutput `pulumi:"status"`
	// Tags.
	Tags pulumi.MapOutput `pulumi:"tags"`
	// The tunnel options of IPsec. See `tunnelOptionsSpecification` below.
	TunnelOptionsSpecifications ConnectionTunnelOptionsSpecificationArrayOutput `pulumi:"tunnelOptionsSpecifications"`
	// The name of the IPsec-VPN connection.
	VpnConnectionName pulumi.StringOutput `pulumi:"vpnConnectionName"`
	// The ID of the VPN gateway.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
}

## Example Usage

Basic Usage

## Import

VPN connection can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/connection:Connection example <id> ```

func GetConnection 

func GetConnection(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *ConnectionState, opts ...pulumi.ResourceOption) (*Connection, error)

GetConnection gets an existing Connection resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewConnection 

func NewConnection(ctx *pulumi.Context,
	name string, args *ConnectionArgs, opts ...pulumi.ResourceOption) (*Connection, error)

NewConnection registers a new resource with the given unique name, arguments, and options.

func (*Connection) ElementType 

func (*Connection) ElementType() reflect.Type

func (*Connection) ToConnectionOutput 

func (i *Connection) ToConnectionOutput() ConnectionOutput

func (*Connection) ToConnectionOutputWithContext 

func (i *Connection) ToConnectionOutputWithContext(ctx context.Context) ConnectionOutput

type ConnectionArgs 

type ConnectionArgs struct {
	// Whether to configure routing automatically. Value:
	// - **true**: Automatically configure routes.
	// - **false**: does not automatically configure routes.
	AutoConfigRoute pulumi.BoolPtrInput
	// vpnBgp configuration. See `bgpConfig` below.
	BgpConfig ConnectionBgpConfigPtrInput
	// The ID of the customer gateway.
	CustomerGatewayId pulumi.StringPtrInput
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrInput
	// Wether enable Dpd detection.
	EnableDpd pulumi.BoolPtrInput
	// enable nat traversal.
	EnableNatTraversal pulumi.BoolPtrInput
	// Enable tunnel bgp.
	EnableTunnelsBgp pulumi.BoolPtrInput
	// Health Check information. See `healthCheckConfig` below.
	HealthCheckConfig ConnectionHealthCheckConfigPtrInput
	// The configuration of Phase 1 negotiations. See `ikeConfig` below.
	IkeConfig ConnectionIkeConfigPtrInput
	// IPsec configuration. See `ipsecConfig` below.
	IpsecConfig ConnectionIpsecConfigPtrInput
	// The CIDR block of the VPC to be connected with the local data center. This parameter is used for phase-two negotiation.
	LocalSubnets pulumi.StringArrayInput
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'vpn_connection_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.216.0. New field 'vpn_connection_name' instead.
	Name pulumi.StringPtrInput
	// The network type of the IPsec connection. Value:
	// - **public**: public network, indicating that the IPsec connection establishes an encrypted communication channel through the public network.
	// - **private**: private network, indicating that the IPsec connection establishes an encrypted communication channel through the private network.
	NetworkType pulumi.StringPtrInput
	// The CIDR block of the local data center. This parameter is used for phase-two negotiation.
	RemoteSubnets pulumi.StringArrayInput
	// Tags.
	Tags pulumi.MapInput
	// The tunnel options of IPsec. See `tunnelOptionsSpecification` below.
	TunnelOptionsSpecifications ConnectionTunnelOptionsSpecificationArrayInput
	// The name of the IPsec-VPN connection.
	VpnConnectionName pulumi.StringPtrInput
	// The ID of the VPN gateway.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	VpnGatewayId pulumi.StringInput
}

The set of arguments for constructing a Connection resource.

func (ConnectionArgs) ElementType 

func (ConnectionArgs) ElementType() reflect.Type

type ConnectionArray 

type ConnectionArray []ConnectionInput

func (ConnectionArray) ElementType 

func (ConnectionArray) ElementType() reflect.Type

func (ConnectionArray) ToConnectionArrayOutput 

func (i ConnectionArray) ToConnectionArrayOutput() ConnectionArrayOutput

func (ConnectionArray) ToConnectionArrayOutputWithContext 

func (i ConnectionArray) ToConnectionArrayOutputWithContext(ctx context.Context) ConnectionArrayOutput

type ConnectionArrayInput 

type ConnectionArrayInput interface {
	pulumi.Input

	ToConnectionArrayOutput() ConnectionArrayOutput
	ToConnectionArrayOutputWithContext(context.Context) ConnectionArrayOutput
}

ConnectionArrayInput is an input type that accepts ConnectionArray and ConnectionArrayOutput values. You can construct a concrete instance of `ConnectionArrayInput` via: 

ConnectionArray{ ConnectionArgs{...} }

type ConnectionArrayOutput 

type ConnectionArrayOutput struct{ *pulumi.OutputState }

func (ConnectionArrayOutput) ElementType 

func (ConnectionArrayOutput) ElementType() reflect.Type

func (ConnectionArrayOutput) Index 

func (o ConnectionArrayOutput) Index(i pulumi.IntInput) ConnectionOutput

func (ConnectionArrayOutput) ToConnectionArrayOutput 

func (o ConnectionArrayOutput) ToConnectionArrayOutput() ConnectionArrayOutput

func (ConnectionArrayOutput) ToConnectionArrayOutputWithContext 

func (o ConnectionArrayOutput) ToConnectionArrayOutputWithContext(ctx context.Context) ConnectionArrayOutput

type ConnectionBgpConfig added in v3.20.0 

type ConnectionBgpConfig struct {
	// Bgp enable.
	Enable *bool `pulumi:"enable"`
	// Local asn.
	LocalAsn *string `pulumi:"localAsn"`
	// Local bgp IP.
	LocalBgpIp *string `pulumi:"localBgpIp"`
	// The negotiation status of Tunnel.
	Status *string `pulumi:"status"`
	// IPSec tunnel Cidr.
	TunnelCidr *string `pulumi:"tunnelCidr"`
}

type ConnectionBgpConfigArgs added in v3.20.0 

type ConnectionBgpConfigArgs struct {
	// Bgp enable.
	Enable pulumi.BoolPtrInput `pulumi:"enable"`
	// Local asn.
	LocalAsn pulumi.StringPtrInput `pulumi:"localAsn"`
	// Local bgp IP.
	LocalBgpIp pulumi.StringPtrInput `pulumi:"localBgpIp"`
	// The negotiation status of Tunnel.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// IPSec tunnel Cidr.
	TunnelCidr pulumi.StringPtrInput `pulumi:"tunnelCidr"`
}

func (ConnectionBgpConfigArgs) ElementType added in v3.20.0 

func (ConnectionBgpConfigArgs) ElementType() reflect.Type

func (ConnectionBgpConfigArgs) ToConnectionBgpConfigOutput added in v3.20.0 

func (i ConnectionBgpConfigArgs) ToConnectionBgpConfigOutput() ConnectionBgpConfigOutput

func (ConnectionBgpConfigArgs) ToConnectionBgpConfigOutputWithContext added in v3.20.0 

func (i ConnectionBgpConfigArgs) ToConnectionBgpConfigOutputWithContext(ctx context.Context) ConnectionBgpConfigOutput

func (ConnectionBgpConfigArgs) ToConnectionBgpConfigPtrOutput added in v3.20.0 

func (i ConnectionBgpConfigArgs) ToConnectionBgpConfigPtrOutput() ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigArgs) ToConnectionBgpConfigPtrOutputWithContext added in v3.20.0 

func (i ConnectionBgpConfigArgs) ToConnectionBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionBgpConfigPtrOutput

type ConnectionBgpConfigInput added in v3.20.0 

type ConnectionBgpConfigInput interface {
	pulumi.Input

	ToConnectionBgpConfigOutput() ConnectionBgpConfigOutput
	ToConnectionBgpConfigOutputWithContext(context.Context) ConnectionBgpConfigOutput
}

ConnectionBgpConfigInput is an input type that accepts ConnectionBgpConfigArgs and ConnectionBgpConfigOutput values. You can construct a concrete instance of `ConnectionBgpConfigInput` via: 

ConnectionBgpConfigArgs{...}

type ConnectionBgpConfigOutput added in v3.20.0 

type ConnectionBgpConfigOutput struct{ *pulumi.OutputState }

func (ConnectionBgpConfigOutput) ElementType added in v3.20.0 

func (ConnectionBgpConfigOutput) ElementType() reflect.Type

func (ConnectionBgpConfigOutput) Enable added in v3.20.0 

func (o ConnectionBgpConfigOutput) Enable() pulumi.BoolPtrOutput

Bgp enable.

func (ConnectionBgpConfigOutput) LocalAsn added in v3.20.0 

func (o ConnectionBgpConfigOutput) LocalAsn() pulumi.StringPtrOutput

Local asn.

func (ConnectionBgpConfigOutput) LocalBgpIp added in v3.20.0 

func (o ConnectionBgpConfigOutput) LocalBgpIp() pulumi.StringPtrOutput

Local bgp IP.

func (ConnectionBgpConfigOutput) Status added in v3.48.0 

func (o ConnectionBgpConfigOutput) Status() pulumi.StringPtrOutput

The negotiation status of Tunnel.

func (ConnectionBgpConfigOutput) ToConnectionBgpConfigOutput added in v3.20.0 

func (o ConnectionBgpConfigOutput) ToConnectionBgpConfigOutput() ConnectionBgpConfigOutput

func (ConnectionBgpConfigOutput) ToConnectionBgpConfigOutputWithContext added in v3.20.0 

func (o ConnectionBgpConfigOutput) ToConnectionBgpConfigOutputWithContext(ctx context.Context) ConnectionBgpConfigOutput

func (ConnectionBgpConfigOutput) ToConnectionBgpConfigPtrOutput added in v3.20.0 

func (o ConnectionBgpConfigOutput) ToConnectionBgpConfigPtrOutput() ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigOutput) ToConnectionBgpConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionBgpConfigOutput) ToConnectionBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigOutput) TunnelCidr added in v3.20.0 

func (o ConnectionBgpConfigOutput) TunnelCidr() pulumi.StringPtrOutput

IPSec tunnel Cidr.

type ConnectionBgpConfigPtrInput added in v3.20.0 

type ConnectionBgpConfigPtrInput interface {
	pulumi.Input

	ToConnectionBgpConfigPtrOutput() ConnectionBgpConfigPtrOutput
	ToConnectionBgpConfigPtrOutputWithContext(context.Context) ConnectionBgpConfigPtrOutput
}

ConnectionBgpConfigPtrInput is an input type that accepts ConnectionBgpConfigArgs, ConnectionBgpConfigPtr and ConnectionBgpConfigPtrOutput values. You can construct a concrete instance of `ConnectionBgpConfigPtrInput` via: 

        ConnectionBgpConfigArgs{...}

or:

        nil

func ConnectionBgpConfigPtr added in v3.20.0 

func ConnectionBgpConfigPtr(v *ConnectionBgpConfigArgs) ConnectionBgpConfigPtrInput

type ConnectionBgpConfigPtrOutput added in v3.20.0 

type ConnectionBgpConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionBgpConfigPtrOutput) Elem added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) Elem() ConnectionBgpConfigOutput

func (ConnectionBgpConfigPtrOutput) ElementType added in v3.20.0 

func (ConnectionBgpConfigPtrOutput) ElementType() reflect.Type

func (ConnectionBgpConfigPtrOutput) Enable added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) Enable() pulumi.BoolPtrOutput

Bgp enable.

func (ConnectionBgpConfigPtrOutput) LocalAsn added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) LocalAsn() pulumi.StringPtrOutput

Local asn.

func (ConnectionBgpConfigPtrOutput) LocalBgpIp added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) LocalBgpIp() pulumi.StringPtrOutput

Local bgp IP.

func (ConnectionBgpConfigPtrOutput) Status added in v3.48.0 

func (o ConnectionBgpConfigPtrOutput) Status() pulumi.StringPtrOutput

The negotiation status of Tunnel.

func (ConnectionBgpConfigPtrOutput) ToConnectionBgpConfigPtrOutput added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) ToConnectionBgpConfigPtrOutput() ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigPtrOutput) ToConnectionBgpConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) ToConnectionBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionBgpConfigPtrOutput

func (ConnectionBgpConfigPtrOutput) TunnelCidr added in v3.20.0 

func (o ConnectionBgpConfigPtrOutput) TunnelCidr() pulumi.StringPtrOutput

IPSec tunnel Cidr.

type ConnectionHealthCheckConfig added in v3.20.0 

type ConnectionHealthCheckConfig struct {
	// Destination IP.
	Dip *string `pulumi:"dip"`
	// Specifies whether to enable healthcheck.
	Enable *bool `pulumi:"enable"`
	// Retry interval.
	Interval *int `pulumi:"interval"`
	// retry times.
	Retry *int `pulumi:"retry"`
	// Source IP.
	Sip *string `pulumi:"sip"`
}

type ConnectionHealthCheckConfigArgs added in v3.20.0 

type ConnectionHealthCheckConfigArgs struct {
	// Destination IP.
	Dip pulumi.StringPtrInput `pulumi:"dip"`
	// Specifies whether to enable healthcheck.
	Enable pulumi.BoolPtrInput `pulumi:"enable"`
	// Retry interval.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// retry times.
	Retry pulumi.IntPtrInput `pulumi:"retry"`
	// Source IP.
	Sip pulumi.StringPtrInput `pulumi:"sip"`
}

func (ConnectionHealthCheckConfigArgs) ElementType added in v3.20.0 

func (ConnectionHealthCheckConfigArgs) ElementType() reflect.Type

func (ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigOutput added in v3.20.0 

func (i ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigOutput() ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigOutputWithContext added in v3.20.0 

func (i ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigPtrOutput added in v3.20.0 

func (i ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigPtrOutput() ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigPtrOutputWithContext added in v3.20.0 

func (i ConnectionHealthCheckConfigArgs) ToConnectionHealthCheckConfigPtrOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigPtrOutput

type ConnectionHealthCheckConfigInput added in v3.20.0 

type ConnectionHealthCheckConfigInput interface {
	pulumi.Input

	ToConnectionHealthCheckConfigOutput() ConnectionHealthCheckConfigOutput
	ToConnectionHealthCheckConfigOutputWithContext(context.Context) ConnectionHealthCheckConfigOutput
}

ConnectionHealthCheckConfigInput is an input type that accepts ConnectionHealthCheckConfigArgs and ConnectionHealthCheckConfigOutput values. You can construct a concrete instance of `ConnectionHealthCheckConfigInput` via: 

ConnectionHealthCheckConfigArgs{...}

type ConnectionHealthCheckConfigOutput added in v3.20.0 

type ConnectionHealthCheckConfigOutput struct{ *pulumi.OutputState }

func (ConnectionHealthCheckConfigOutput) Dip added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Dip() pulumi.StringPtrOutput

Destination IP.

func (ConnectionHealthCheckConfigOutput) ElementType added in v3.20.0 

func (ConnectionHealthCheckConfigOutput) ElementType() reflect.Type

func (ConnectionHealthCheckConfigOutput) Enable added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Enable() pulumi.BoolPtrOutput

Specifies whether to enable healthcheck.

func (ConnectionHealthCheckConfigOutput) Interval added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Interval() pulumi.IntPtrOutput

Retry interval.

func (ConnectionHealthCheckConfigOutput) Retry added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Retry() pulumi.IntPtrOutput

retry times.

func (ConnectionHealthCheckConfigOutput) Sip added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) Sip() pulumi.StringPtrOutput

Source IP.

func (ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigOutput added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigOutput() ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigOutputWithContext added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigPtrOutput added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigPtrOutput() ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionHealthCheckConfigOutput) ToConnectionHealthCheckConfigPtrOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigPtrOutput

type ConnectionHealthCheckConfigPtrInput added in v3.20.0 

type ConnectionHealthCheckConfigPtrInput interface {
	pulumi.Input

	ToConnectionHealthCheckConfigPtrOutput() ConnectionHealthCheckConfigPtrOutput
	ToConnectionHealthCheckConfigPtrOutputWithContext(context.Context) ConnectionHealthCheckConfigPtrOutput
}

ConnectionHealthCheckConfigPtrInput is an input type that accepts ConnectionHealthCheckConfigArgs, ConnectionHealthCheckConfigPtr and ConnectionHealthCheckConfigPtrOutput values. You can construct a concrete instance of `ConnectionHealthCheckConfigPtrInput` via: 

        ConnectionHealthCheckConfigArgs{...}

or:

        nil

func ConnectionHealthCheckConfigPtr added in v3.20.0 

func ConnectionHealthCheckConfigPtr(v *ConnectionHealthCheckConfigArgs) ConnectionHealthCheckConfigPtrInput

type ConnectionHealthCheckConfigPtrOutput added in v3.20.0 

type ConnectionHealthCheckConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionHealthCheckConfigPtrOutput) Dip added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Dip() pulumi.StringPtrOutput

Destination IP.

func (ConnectionHealthCheckConfigPtrOutput) Elem added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Elem() ConnectionHealthCheckConfigOutput

func (ConnectionHealthCheckConfigPtrOutput) ElementType added in v3.20.0 

func (ConnectionHealthCheckConfigPtrOutput) ElementType() reflect.Type

func (ConnectionHealthCheckConfigPtrOutput) Enable added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Enable() pulumi.BoolPtrOutput

Specifies whether to enable healthcheck.

func (ConnectionHealthCheckConfigPtrOutput) Interval added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Interval() pulumi.IntPtrOutput

Retry interval.

func (ConnectionHealthCheckConfigPtrOutput) Retry added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Retry() pulumi.IntPtrOutput

retry times.

func (ConnectionHealthCheckConfigPtrOutput) Sip added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) Sip() pulumi.StringPtrOutput

Source IP.

func (ConnectionHealthCheckConfigPtrOutput) ToConnectionHealthCheckConfigPtrOutput added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) ToConnectionHealthCheckConfigPtrOutput() ConnectionHealthCheckConfigPtrOutput

func (ConnectionHealthCheckConfigPtrOutput) ToConnectionHealthCheckConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionHealthCheckConfigPtrOutput) ToConnectionHealthCheckConfigPtrOutputWithContext(ctx context.Context) ConnectionHealthCheckConfigPtrOutput

type ConnectionIkeConfig 

type ConnectionIkeConfig struct {
	// IKE auth Algorithm.
	IkeAuthAlg *string `pulumi:"ikeAuthAlg"`
	// IKE encript algorithm.
	IkeEncAlg *string `pulumi:"ikeEncAlg"`
	// IKE lifetime.
	IkeLifetime *int `pulumi:"ikeLifetime"`
	// The local ID, which supports the FQDN and IP formats, and defaults to the IP address of the selected VPN gateway.
	IkeLocalId *string `pulumi:"ikeLocalId"`
	// IKE mode, supports main and aggressive mode. The main mode is highly secure. If NAT traversal is enabled, we recommend that you use the aggressive mode.
	IkeMode *string `pulumi:"ikeMode"`
	// DH group.
	IkePfs *string `pulumi:"ikePfs"`
	// The peer ID. The FQDN and IP address formats are supported. The default value is the IP address of the selected customer gateway.
	IkeRemoteId *string `pulumi:"ikeRemoteId"`
	// IKE version.
	IkeVersion *string `pulumi:"ikeVersion"`
	// Preshared secret key.
	Psk *string `pulumi:"psk"`
}

type ConnectionIkeConfigArgs 

type ConnectionIkeConfigArgs struct {
	// IKE auth Algorithm.
	IkeAuthAlg pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	// IKE encript algorithm.
	IkeEncAlg pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	// IKE lifetime.
	IkeLifetime pulumi.IntPtrInput `pulumi:"ikeLifetime"`
	// The local ID, which supports the FQDN and IP formats, and defaults to the IP address of the selected VPN gateway.
	IkeLocalId pulumi.StringPtrInput `pulumi:"ikeLocalId"`
	// IKE mode, supports main and aggressive mode. The main mode is highly secure. If NAT traversal is enabled, we recommend that you use the aggressive mode.
	IkeMode pulumi.StringPtrInput `pulumi:"ikeMode"`
	// DH group.
	IkePfs pulumi.StringPtrInput `pulumi:"ikePfs"`
	// The peer ID. The FQDN and IP address formats are supported. The default value is the IP address of the selected customer gateway.
	IkeRemoteId pulumi.StringPtrInput `pulumi:"ikeRemoteId"`
	// IKE version.
	IkeVersion pulumi.StringPtrInput `pulumi:"ikeVersion"`
	// Preshared secret key.
	Psk pulumi.StringPtrInput `pulumi:"psk"`
}

func (ConnectionIkeConfigArgs) ElementType 

func (ConnectionIkeConfigArgs) ElementType() reflect.Type

func (ConnectionIkeConfigArgs) ToConnectionIkeConfigOutput 

func (i ConnectionIkeConfigArgs) ToConnectionIkeConfigOutput() ConnectionIkeConfigOutput

func (ConnectionIkeConfigArgs) ToConnectionIkeConfigOutputWithContext 

func (i ConnectionIkeConfigArgs) ToConnectionIkeConfigOutputWithContext(ctx context.Context) ConnectionIkeConfigOutput

func (ConnectionIkeConfigArgs) ToConnectionIkeConfigPtrOutput added in v3.20.0 

func (i ConnectionIkeConfigArgs) ToConnectionIkeConfigPtrOutput() ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigArgs) ToConnectionIkeConfigPtrOutputWithContext added in v3.20.0 

func (i ConnectionIkeConfigArgs) ToConnectionIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionIkeConfigPtrOutput

type ConnectionIkeConfigInput 

type ConnectionIkeConfigInput interface {
	pulumi.Input

	ToConnectionIkeConfigOutput() ConnectionIkeConfigOutput
	ToConnectionIkeConfigOutputWithContext(context.Context) ConnectionIkeConfigOutput
}

ConnectionIkeConfigInput is an input type that accepts ConnectionIkeConfigArgs and ConnectionIkeConfigOutput values. You can construct a concrete instance of `ConnectionIkeConfigInput` via: 

ConnectionIkeConfigArgs{...}

type ConnectionIkeConfigOutput 

type ConnectionIkeConfigOutput struct{ *pulumi.OutputState }

func (ConnectionIkeConfigOutput) ElementType 

func (ConnectionIkeConfigOutput) ElementType() reflect.Type

func (ConnectionIkeConfigOutput) IkeAuthAlg 

func (o ConnectionIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

IKE auth Algorithm.

func (ConnectionIkeConfigOutput) IkeEncAlg 

func (o ConnectionIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

IKE encript algorithm.

func (ConnectionIkeConfigOutput) IkeLifetime 

func (o ConnectionIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

IKE lifetime.

func (ConnectionIkeConfigOutput) IkeLocalId 

func (o ConnectionIkeConfigOutput) IkeLocalId() pulumi.StringPtrOutput

The local ID, which supports the FQDN and IP formats, and defaults to the IP address of the selected VPN gateway.

func (ConnectionIkeConfigOutput) IkeMode 

func (o ConnectionIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

IKE mode, supports main and aggressive mode. The main mode is highly secure. If NAT traversal is enabled, we recommend that you use the aggressive mode.

func (ConnectionIkeConfigOutput) IkePfs 

func (o ConnectionIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

DH group.

func (ConnectionIkeConfigOutput) IkeRemoteId 

func (o ConnectionIkeConfigOutput) IkeRemoteId() pulumi.StringPtrOutput

The peer ID. The FQDN and IP address formats are supported. The default value is the IP address of the selected customer gateway.

func (ConnectionIkeConfigOutput) IkeVersion 

func (o ConnectionIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

IKE version.

func (ConnectionIkeConfigOutput) Psk 

func (o ConnectionIkeConfigOutput) Psk() pulumi.StringPtrOutput

Preshared secret key.

func (ConnectionIkeConfigOutput) ToConnectionIkeConfigOutput 

func (o ConnectionIkeConfigOutput) ToConnectionIkeConfigOutput() ConnectionIkeConfigOutput

func (ConnectionIkeConfigOutput) ToConnectionIkeConfigOutputWithContext 

func (o ConnectionIkeConfigOutput) ToConnectionIkeConfigOutputWithContext(ctx context.Context) ConnectionIkeConfigOutput

func (ConnectionIkeConfigOutput) ToConnectionIkeConfigPtrOutput added in v3.20.0 

func (o ConnectionIkeConfigOutput) ToConnectionIkeConfigPtrOutput() ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigOutput) ToConnectionIkeConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionIkeConfigOutput) ToConnectionIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionIkeConfigPtrOutput

type ConnectionIkeConfigPtrInput added in v3.20.0 

type ConnectionIkeConfigPtrInput interface {
	pulumi.Input

	ToConnectionIkeConfigPtrOutput() ConnectionIkeConfigPtrOutput
	ToConnectionIkeConfigPtrOutputWithContext(context.Context) ConnectionIkeConfigPtrOutput
}

ConnectionIkeConfigPtrInput is an input type that accepts ConnectionIkeConfigArgs, ConnectionIkeConfigPtr and ConnectionIkeConfigPtrOutput values. You can construct a concrete instance of `ConnectionIkeConfigPtrInput` via: 

        ConnectionIkeConfigArgs{...}

or:

        nil

func ConnectionIkeConfigPtr added in v3.20.0 

func ConnectionIkeConfigPtr(v *ConnectionIkeConfigArgs) ConnectionIkeConfigPtrInput

type ConnectionIkeConfigPtrOutput added in v3.20.0 

type ConnectionIkeConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionIkeConfigPtrOutput) Elem added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) Elem() ConnectionIkeConfigOutput

func (ConnectionIkeConfigPtrOutput) ElementType added in v3.20.0 

func (ConnectionIkeConfigPtrOutput) ElementType() reflect.Type

func (ConnectionIkeConfigPtrOutput) IkeAuthAlg added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeAuthAlg() pulumi.StringPtrOutput

IKE auth Algorithm.

func (ConnectionIkeConfigPtrOutput) IkeEncAlg added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeEncAlg() pulumi.StringPtrOutput

IKE encript algorithm.

func (ConnectionIkeConfigPtrOutput) IkeLifetime added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeLifetime() pulumi.IntPtrOutput

IKE lifetime.

func (ConnectionIkeConfigPtrOutput) IkeLocalId added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeLocalId() pulumi.StringPtrOutput

The local ID, which supports the FQDN and IP formats, and defaults to the IP address of the selected VPN gateway.

func (ConnectionIkeConfigPtrOutput) IkeMode added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeMode() pulumi.StringPtrOutput

IKE mode, supports main and aggressive mode. The main mode is highly secure. If NAT traversal is enabled, we recommend that you use the aggressive mode.

func (ConnectionIkeConfigPtrOutput) IkePfs added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkePfs() pulumi.StringPtrOutput

DH group.

func (ConnectionIkeConfigPtrOutput) IkeRemoteId added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeRemoteId() pulumi.StringPtrOutput

The peer ID. The FQDN and IP address formats are supported. The default value is the IP address of the selected customer gateway.

func (ConnectionIkeConfigPtrOutput) IkeVersion added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) IkeVersion() pulumi.StringPtrOutput

IKE version.

func (ConnectionIkeConfigPtrOutput) Psk added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) Psk() pulumi.StringPtrOutput

Preshared secret key.

func (ConnectionIkeConfigPtrOutput) ToConnectionIkeConfigPtrOutput added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) ToConnectionIkeConfigPtrOutput() ConnectionIkeConfigPtrOutput

func (ConnectionIkeConfigPtrOutput) ToConnectionIkeConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionIkeConfigPtrOutput) ToConnectionIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionIkeConfigPtrOutput

type ConnectionInput 

type ConnectionInput interface {
	pulumi.Input

	ToConnectionOutput() ConnectionOutput
	ToConnectionOutputWithContext(ctx context.Context) ConnectionOutput
}

type ConnectionIpsecConfig 

type ConnectionIpsecConfig struct {
	// IPsec authentication algorithm. sha1 and md5 are supported.
	IpsecAuthAlg *string `pulumi:"ipsecAuthAlg"`
	// IPsec Encript algorithm.
	IpsecEncAlg *string `pulumi:"ipsecEncAlg"`
	// IPsec lifetime.
	IpsecLifetime *int `pulumi:"ipsecLifetime"`
	// DH Group.
	IpsecPfs *string `pulumi:"ipsecPfs"`
}

type ConnectionIpsecConfigArgs 

type ConnectionIpsecConfigArgs struct {
	// IPsec authentication algorithm. sha1 and md5 are supported.
	IpsecAuthAlg pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	// IPsec Encript algorithm.
	IpsecEncAlg pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	// IPsec lifetime.
	IpsecLifetime pulumi.IntPtrInput `pulumi:"ipsecLifetime"`
	// DH Group.
	IpsecPfs pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (ConnectionIpsecConfigArgs) ElementType 

func (ConnectionIpsecConfigArgs) ElementType() reflect.Type

func (ConnectionIpsecConfigArgs) ToConnectionIpsecConfigOutput 

func (i ConnectionIpsecConfigArgs) ToConnectionIpsecConfigOutput() ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigArgs) ToConnectionIpsecConfigOutputWithContext 

func (i ConnectionIpsecConfigArgs) ToConnectionIpsecConfigOutputWithContext(ctx context.Context) ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigArgs) ToConnectionIpsecConfigPtrOutput added in v3.20.0 

func (i ConnectionIpsecConfigArgs) ToConnectionIpsecConfigPtrOutput() ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigArgs) ToConnectionIpsecConfigPtrOutputWithContext added in v3.20.0 

func (i ConnectionIpsecConfigArgs) ToConnectionIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionIpsecConfigPtrOutput

type ConnectionIpsecConfigInput 

type ConnectionIpsecConfigInput interface {
	pulumi.Input

	ToConnectionIpsecConfigOutput() ConnectionIpsecConfigOutput
	ToConnectionIpsecConfigOutputWithContext(context.Context) ConnectionIpsecConfigOutput
}

ConnectionIpsecConfigInput is an input type that accepts ConnectionIpsecConfigArgs and ConnectionIpsecConfigOutput values. You can construct a concrete instance of `ConnectionIpsecConfigInput` via: 

ConnectionIpsecConfigArgs{...}

type ConnectionIpsecConfigOutput 

type ConnectionIpsecConfigOutput struct{ *pulumi.OutputState }

func (ConnectionIpsecConfigOutput) ElementType 

func (ConnectionIpsecConfigOutput) ElementType() reflect.Type

func (ConnectionIpsecConfigOutput) IpsecAuthAlg 

func (o ConnectionIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

IPsec authentication algorithm. sha1 and md5 are supported.

func (ConnectionIpsecConfigOutput) IpsecEncAlg 

func (o ConnectionIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

IPsec Encript algorithm.

func (ConnectionIpsecConfigOutput) IpsecLifetime 

func (o ConnectionIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

IPsec lifetime.

func (ConnectionIpsecConfigOutput) IpsecPfs 

func (o ConnectionIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

DH Group.

func (ConnectionIpsecConfigOutput) ToConnectionIpsecConfigOutput 

func (o ConnectionIpsecConfigOutput) ToConnectionIpsecConfigOutput() ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigOutput) ToConnectionIpsecConfigOutputWithContext 

func (o ConnectionIpsecConfigOutput) ToConnectionIpsecConfigOutputWithContext(ctx context.Context) ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigOutput) ToConnectionIpsecConfigPtrOutput added in v3.20.0 

func (o ConnectionIpsecConfigOutput) ToConnectionIpsecConfigPtrOutput() ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigOutput) ToConnectionIpsecConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionIpsecConfigOutput) ToConnectionIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionIpsecConfigPtrOutput

type ConnectionIpsecConfigPtrInput added in v3.20.0 

type ConnectionIpsecConfigPtrInput interface {
	pulumi.Input

	ToConnectionIpsecConfigPtrOutput() ConnectionIpsecConfigPtrOutput
	ToConnectionIpsecConfigPtrOutputWithContext(context.Context) ConnectionIpsecConfigPtrOutput
}

ConnectionIpsecConfigPtrInput is an input type that accepts ConnectionIpsecConfigArgs, ConnectionIpsecConfigPtr and ConnectionIpsecConfigPtrOutput values. You can construct a concrete instance of `ConnectionIpsecConfigPtrInput` via: 

        ConnectionIpsecConfigArgs{...}

or:

        nil

func ConnectionIpsecConfigPtr added in v3.20.0 

func ConnectionIpsecConfigPtr(v *ConnectionIpsecConfigArgs) ConnectionIpsecConfigPtrInput

type ConnectionIpsecConfigPtrOutput added in v3.20.0 

type ConnectionIpsecConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionIpsecConfigPtrOutput) Elem added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) Elem() ConnectionIpsecConfigOutput

func (ConnectionIpsecConfigPtrOutput) ElementType added in v3.20.0 

func (ConnectionIpsecConfigPtrOutput) ElementType() reflect.Type

func (ConnectionIpsecConfigPtrOutput) IpsecAuthAlg added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) IpsecAuthAlg() pulumi.StringPtrOutput

IPsec authentication algorithm. sha1 and md5 are supported.

func (ConnectionIpsecConfigPtrOutput) IpsecEncAlg added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) IpsecEncAlg() pulumi.StringPtrOutput

IPsec Encript algorithm.

func (ConnectionIpsecConfigPtrOutput) IpsecLifetime added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) IpsecLifetime() pulumi.IntPtrOutput

IPsec lifetime.

func (ConnectionIpsecConfigPtrOutput) IpsecPfs added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) IpsecPfs() pulumi.StringPtrOutput

DH Group.

func (ConnectionIpsecConfigPtrOutput) ToConnectionIpsecConfigPtrOutput added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) ToConnectionIpsecConfigPtrOutput() ConnectionIpsecConfigPtrOutput

func (ConnectionIpsecConfigPtrOutput) ToConnectionIpsecConfigPtrOutputWithContext added in v3.20.0 

func (o ConnectionIpsecConfigPtrOutput) ToConnectionIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionIpsecConfigPtrOutput

type ConnectionMap 

type ConnectionMap map[string]ConnectionInput

func (ConnectionMap) ElementType 

func (ConnectionMap) ElementType() reflect.Type

func (ConnectionMap) ToConnectionMapOutput 

func (i ConnectionMap) ToConnectionMapOutput() ConnectionMapOutput

func (ConnectionMap) ToConnectionMapOutputWithContext 

func (i ConnectionMap) ToConnectionMapOutputWithContext(ctx context.Context) ConnectionMapOutput

type ConnectionMapInput 

type ConnectionMapInput interface {
	pulumi.Input

	ToConnectionMapOutput() ConnectionMapOutput
	ToConnectionMapOutputWithContext(context.Context) ConnectionMapOutput
}

ConnectionMapInput is an input type that accepts ConnectionMap and ConnectionMapOutput values. You can construct a concrete instance of `ConnectionMapInput` via: 

ConnectionMap{ "key": ConnectionArgs{...} }

type ConnectionMapOutput 

type ConnectionMapOutput struct{ *pulumi.OutputState }

func (ConnectionMapOutput) ElementType 

func (ConnectionMapOutput) ElementType() reflect.Type

func (ConnectionMapOutput) MapIndex 

func (o ConnectionMapOutput) MapIndex(k pulumi.StringInput) ConnectionOutput

func (ConnectionMapOutput) ToConnectionMapOutput 

func (o ConnectionMapOutput) ToConnectionMapOutput() ConnectionMapOutput

func (ConnectionMapOutput) ToConnectionMapOutputWithContext 

func (o ConnectionMapOutput) ToConnectionMapOutputWithContext(ctx context.Context) ConnectionMapOutput

type ConnectionOutput 

type ConnectionOutput struct{ *pulumi.OutputState }

func (ConnectionOutput) AutoConfigRoute added in v3.48.0 

func (o ConnectionOutput) AutoConfigRoute() pulumi.BoolPtrOutput

Whether to configure routing automatically. Value: - **true**: Automatically configure routes. - **false**: does not automatically configure routes.

func (ConnectionOutput) BgpConfig added in v3.27.0 

func (o ConnectionOutput) BgpConfig() ConnectionBgpConfigOutput

vpnBgp configuration. See `bgpConfig` below.

func (ConnectionOutput) CreateTime added in v3.48.0 

func (o ConnectionOutput) CreateTime() pulumi.IntOutput

The time when the IPsec-VPN connection was created.

func (ConnectionOutput) CustomerGatewayId added in v3.27.0 

func (o ConnectionOutput) CustomerGatewayId() pulumi.StringPtrOutput

The ID of the customer gateway.

func (ConnectionOutput) EffectImmediately added in v3.27.0 

func (o ConnectionOutput) EffectImmediately() pulumi.BoolPtrOutput

Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.

func (ConnectionOutput) ElementType 

func (ConnectionOutput) ElementType() reflect.Type

func (ConnectionOutput) EnableDpd added in v3.27.0 

func (o ConnectionOutput) EnableDpd() pulumi.BoolOutput

Wether enable Dpd detection.

func (ConnectionOutput) EnableNatTraversal added in v3.27.0 

func (o ConnectionOutput) EnableNatTraversal() pulumi.BoolOutput

enable nat traversal.

func (ConnectionOutput) EnableTunnelsBgp added in v3.48.0 

func (o ConnectionOutput) EnableTunnelsBgp() pulumi.BoolOutput

Enable tunnel bgp.

func (ConnectionOutput) HealthCheckConfig added in v3.27.0 

func (o ConnectionOutput) HealthCheckConfig() ConnectionHealthCheckConfigOutput

Health Check information. See `healthCheckConfig` below.

func (ConnectionOutput) IkeConfig added in v3.27.0 

func (o ConnectionOutput) IkeConfig() ConnectionIkeConfigOutput

The configuration of Phase 1 negotiations. See `ikeConfig` below.

func (ConnectionOutput) IpsecConfig added in v3.27.0 

func (o ConnectionOutput) IpsecConfig() ConnectionIpsecConfigOutput

IPsec configuration. See `ipsecConfig` below.

func (ConnectionOutput) LocalSubnets added in v3.27.0 

func (o ConnectionOutput) LocalSubnets() pulumi.StringArrayOutput

The CIDR block of the VPC to be connected with the local data center. This parameter is used for phase-two negotiation.

func (ConnectionOutput) Name deprecated added in v3.27.0 

func (o ConnectionOutput) Name() pulumi.StringOutput

. Field 'name' has been deprecated from provider version 1.216.0. New field 'vpn_connection_name' instead.

Deprecated: Field 'name' has been deprecated since provider version 1.216.0. New field 'vpn_connection_name' instead.

func (ConnectionOutput) NetworkType added in v3.48.0 

func (o ConnectionOutput) NetworkType() pulumi.StringPtrOutput

The network type of the IPsec connection. Value: - **public**: public network, indicating that the IPsec connection establishes an encrypted communication channel through the public network. - **private**: private network, indicating that the IPsec connection establishes an encrypted communication channel through the private network.

func (ConnectionOutput) RemoteSubnets added in v3.27.0 

func (o ConnectionOutput) RemoteSubnets() pulumi.StringArrayOutput

The CIDR block of the local data center. This parameter is used for phase-two negotiation.

func (ConnectionOutput) ResourceGroupId added in v3.48.0 

func (o ConnectionOutput) ResourceGroupId() pulumi.StringOutput

The ID of the resource group.

func (ConnectionOutput) Status added in v3.27.0 

func (o ConnectionOutput) Status() pulumi.StringOutput

The negotiation status of Tunnel.

func (ConnectionOutput) Tags added in v3.48.0 

func (o ConnectionOutput) Tags() pulumi.MapOutput

Tags.

func (ConnectionOutput) ToConnectionOutput 

func (o ConnectionOutput) ToConnectionOutput() ConnectionOutput

func (ConnectionOutput) ToConnectionOutputWithContext 

func (o ConnectionOutput) ToConnectionOutputWithContext(ctx context.Context) ConnectionOutput

func (ConnectionOutput) TunnelOptionsSpecifications added in v3.48.0 

func (o ConnectionOutput) TunnelOptionsSpecifications() ConnectionTunnelOptionsSpecificationArrayOutput

The tunnel options of IPsec. See `tunnelOptionsSpecification` below.

func (ConnectionOutput) VpnConnectionName added in v3.48.0 

func (o ConnectionOutput) VpnConnectionName() pulumi.StringOutput

The name of the IPsec-VPN connection.

func (ConnectionOutput) VpnGatewayId added in v3.27.0 

func (o ConnectionOutput) VpnGatewayId() pulumi.StringOutput

The ID of the VPN gateway.

The following arguments will be discarded. Please use new fields as soon as possible:

type ConnectionState 

type ConnectionState struct {
	// Whether to configure routing automatically. Value:
	// - **true**: Automatically configure routes.
	// - **false**: does not automatically configure routes.
	AutoConfigRoute pulumi.BoolPtrInput
	// vpnBgp configuration. See `bgpConfig` below.
	BgpConfig ConnectionBgpConfigPtrInput
	// The time when the IPsec-VPN connection was created.
	CreateTime pulumi.IntPtrInput
	// The ID of the customer gateway.
	CustomerGatewayId pulumi.StringPtrInput
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrInput
	// Wether enable Dpd detection.
	EnableDpd pulumi.BoolPtrInput
	// enable nat traversal.
	EnableNatTraversal pulumi.BoolPtrInput
	// Enable tunnel bgp.
	EnableTunnelsBgp pulumi.BoolPtrInput
	// Health Check information. See `healthCheckConfig` below.
	HealthCheckConfig ConnectionHealthCheckConfigPtrInput
	// The configuration of Phase 1 negotiations. See `ikeConfig` below.
	IkeConfig ConnectionIkeConfigPtrInput
	// IPsec configuration. See `ipsecConfig` below.
	IpsecConfig ConnectionIpsecConfigPtrInput
	// The CIDR block of the VPC to be connected with the local data center. This parameter is used for phase-two negotiation.
	LocalSubnets pulumi.StringArrayInput
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'vpn_connection_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.216.0. New field 'vpn_connection_name' instead.
	Name pulumi.StringPtrInput
	// The network type of the IPsec connection. Value:
	// - **public**: public network, indicating that the IPsec connection establishes an encrypted communication channel through the public network.
	// - **private**: private network, indicating that the IPsec connection establishes an encrypted communication channel through the private network.
	NetworkType pulumi.StringPtrInput
	// The CIDR block of the local data center. This parameter is used for phase-two negotiation.
	RemoteSubnets pulumi.StringArrayInput
	// The ID of the resource group.
	ResourceGroupId pulumi.StringPtrInput
	// The negotiation status of Tunnel.
	Status pulumi.StringPtrInput
	// Tags.
	Tags pulumi.MapInput
	// The tunnel options of IPsec. See `tunnelOptionsSpecification` below.
	TunnelOptionsSpecifications ConnectionTunnelOptionsSpecificationArrayInput
	// The name of the IPsec-VPN connection.
	VpnConnectionName pulumi.StringPtrInput
	// The ID of the VPN gateway.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	VpnGatewayId pulumi.StringPtrInput
}

func (ConnectionState) ElementType 

func (ConnectionState) ElementType() reflect.Type

type ConnectionTunnelOptionsSpecification added in v3.48.0 

type ConnectionTunnelOptionsSpecification struct {
	// The ID of the customer gateway in Tunnel.
	CustomerGatewayId *string `pulumi:"customerGatewayId"`
	// Wether enable Dpd detection.
	EnableDpd *bool `pulumi:"enableDpd"`
	// enable nat traversal.
	EnableNatTraversal *bool `pulumi:"enableNatTraversal"`
	// The local internet IP in Tunnel.
	InternetIp *string `pulumi:"internetIp"`
	// The role of Tunnel.
	Role *string `pulumi:"role"`
	// The state of Tunnel.
	State *string `pulumi:"state"`
	// The negotiation status of Tunnel.
	Status *string `pulumi:"status"`
	// The bgp config of Tunnel. See `tunnelBgpConfig` below.
	TunnelBgpConfig *ConnectionTunnelOptionsSpecificationTunnelBgpConfig `pulumi:"tunnelBgpConfig"`
	// The tunnel ID of IPsec-VPN connection.
	TunnelId *string `pulumi:"tunnelId"`
	// The configuration of Phase 1 negotiations in Tunnel. See `tunnelIkeConfig` below.
	TunnelIkeConfig *ConnectionTunnelOptionsSpecificationTunnelIkeConfig `pulumi:"tunnelIkeConfig"`
	// IPsec configuration in Tunnel. See `tunnelIpsecConfig` below.
	TunnelIpsecConfig *ConnectionTunnelOptionsSpecificationTunnelIpsecConfig `pulumi:"tunnelIpsecConfig"`
	// The zoneNo of tunnel.
	ZoneNo *string `pulumi:"zoneNo"`
}

type ConnectionTunnelOptionsSpecificationArgs added in v3.48.0 

type ConnectionTunnelOptionsSpecificationArgs struct {
	// The ID of the customer gateway in Tunnel.
	CustomerGatewayId pulumi.StringPtrInput `pulumi:"customerGatewayId"`
	// Wether enable Dpd detection.
	EnableDpd pulumi.BoolPtrInput `pulumi:"enableDpd"`
	// enable nat traversal.
	EnableNatTraversal pulumi.BoolPtrInput `pulumi:"enableNatTraversal"`
	// The local internet IP in Tunnel.
	InternetIp pulumi.StringPtrInput `pulumi:"internetIp"`
	// The role of Tunnel.
	Role pulumi.StringPtrInput `pulumi:"role"`
	// The state of Tunnel.
	State pulumi.StringPtrInput `pulumi:"state"`
	// The negotiation status of Tunnel.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// The bgp config of Tunnel. See `tunnelBgpConfig` below.
	TunnelBgpConfig ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrInput `pulumi:"tunnelBgpConfig"`
	// The tunnel ID of IPsec-VPN connection.
	TunnelId pulumi.StringPtrInput `pulumi:"tunnelId"`
	// The configuration of Phase 1 negotiations in Tunnel. See `tunnelIkeConfig` below.
	TunnelIkeConfig ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrInput `pulumi:"tunnelIkeConfig"`
	// IPsec configuration in Tunnel. See `tunnelIpsecConfig` below.
	TunnelIpsecConfig ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrInput `pulumi:"tunnelIpsecConfig"`
	// The zoneNo of tunnel.
	ZoneNo pulumi.StringPtrInput `pulumi:"zoneNo"`
}

func (ConnectionTunnelOptionsSpecificationArgs) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationArgs) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationArgs) ToConnectionTunnelOptionsSpecificationOutput added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationArgs) ToConnectionTunnelOptionsSpecificationOutput() ConnectionTunnelOptionsSpecificationOutput

func (ConnectionTunnelOptionsSpecificationArgs) ToConnectionTunnelOptionsSpecificationOutputWithContext added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationArgs) ToConnectionTunnelOptionsSpecificationOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationOutput

type ConnectionTunnelOptionsSpecificationArray added in v3.48.0 

type ConnectionTunnelOptionsSpecificationArray []ConnectionTunnelOptionsSpecificationInput

func (ConnectionTunnelOptionsSpecificationArray) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationArray) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationArray) ToConnectionTunnelOptionsSpecificationArrayOutput added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationArray) ToConnectionTunnelOptionsSpecificationArrayOutput() ConnectionTunnelOptionsSpecificationArrayOutput

func (ConnectionTunnelOptionsSpecificationArray) ToConnectionTunnelOptionsSpecificationArrayOutputWithContext added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationArray) ToConnectionTunnelOptionsSpecificationArrayOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationArrayOutput

type ConnectionTunnelOptionsSpecificationArrayInput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationArrayInput interface {
	pulumi.Input

	ToConnectionTunnelOptionsSpecificationArrayOutput() ConnectionTunnelOptionsSpecificationArrayOutput
	ToConnectionTunnelOptionsSpecificationArrayOutputWithContext(context.Context) ConnectionTunnelOptionsSpecificationArrayOutput
}

ConnectionTunnelOptionsSpecificationArrayInput is an input type that accepts ConnectionTunnelOptionsSpecificationArray and ConnectionTunnelOptionsSpecificationArrayOutput values. You can construct a concrete instance of `ConnectionTunnelOptionsSpecificationArrayInput` via: 

ConnectionTunnelOptionsSpecificationArray{ ConnectionTunnelOptionsSpecificationArgs{...} }

type ConnectionTunnelOptionsSpecificationArrayOutput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationArrayOutput struct{ *pulumi.OutputState }

func (ConnectionTunnelOptionsSpecificationArrayOutput) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationArrayOutput) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationArrayOutput) Index added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationArrayOutput) Index(i pulumi.IntInput) ConnectionTunnelOptionsSpecificationOutput

func (ConnectionTunnelOptionsSpecificationArrayOutput) ToConnectionTunnelOptionsSpecificationArrayOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationArrayOutput) ToConnectionTunnelOptionsSpecificationArrayOutput() ConnectionTunnelOptionsSpecificationArrayOutput

func (ConnectionTunnelOptionsSpecificationArrayOutput) ToConnectionTunnelOptionsSpecificationArrayOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationArrayOutput) ToConnectionTunnelOptionsSpecificationArrayOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationArrayOutput

type ConnectionTunnelOptionsSpecificationInput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationInput interface {
	pulumi.Input

	ToConnectionTunnelOptionsSpecificationOutput() ConnectionTunnelOptionsSpecificationOutput
	ToConnectionTunnelOptionsSpecificationOutputWithContext(context.Context) ConnectionTunnelOptionsSpecificationOutput
}

ConnectionTunnelOptionsSpecificationInput is an input type that accepts ConnectionTunnelOptionsSpecificationArgs and ConnectionTunnelOptionsSpecificationOutput values. You can construct a concrete instance of `ConnectionTunnelOptionsSpecificationInput` via: 

ConnectionTunnelOptionsSpecificationArgs{...}

type ConnectionTunnelOptionsSpecificationOutput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationOutput struct{ *pulumi.OutputState }

func (ConnectionTunnelOptionsSpecificationOutput) CustomerGatewayId added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) CustomerGatewayId() pulumi.StringPtrOutput

The ID of the customer gateway in Tunnel.

func (ConnectionTunnelOptionsSpecificationOutput) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationOutput) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationOutput) EnableDpd added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) EnableDpd() pulumi.BoolPtrOutput

Wether enable Dpd detection.

func (ConnectionTunnelOptionsSpecificationOutput) EnableNatTraversal added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) EnableNatTraversal() pulumi.BoolPtrOutput

enable nat traversal.

func (ConnectionTunnelOptionsSpecificationOutput) InternetIp added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) InternetIp() pulumi.StringPtrOutput

The local internet IP in Tunnel.

func (ConnectionTunnelOptionsSpecificationOutput) Role added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) Role() pulumi.StringPtrOutput

The role of Tunnel.

func (ConnectionTunnelOptionsSpecificationOutput) State added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) State() pulumi.StringPtrOutput

The state of Tunnel.

func (ConnectionTunnelOptionsSpecificationOutput) Status added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) Status() pulumi.StringPtrOutput

The negotiation status of Tunnel.

func (ConnectionTunnelOptionsSpecificationOutput) ToConnectionTunnelOptionsSpecificationOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) ToConnectionTunnelOptionsSpecificationOutput() ConnectionTunnelOptionsSpecificationOutput

func (ConnectionTunnelOptionsSpecificationOutput) ToConnectionTunnelOptionsSpecificationOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) ToConnectionTunnelOptionsSpecificationOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationOutput

func (ConnectionTunnelOptionsSpecificationOutput) TunnelBgpConfig added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) TunnelBgpConfig() ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput

The bgp config of Tunnel. See `tunnelBgpConfig` below.

func (ConnectionTunnelOptionsSpecificationOutput) TunnelId added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) TunnelId() pulumi.StringPtrOutput

The tunnel ID of IPsec-VPN connection.

func (ConnectionTunnelOptionsSpecificationOutput) TunnelIkeConfig added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) TunnelIkeConfig() ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput

The configuration of Phase 1 negotiations in Tunnel. See `tunnelIkeConfig` below.

func (ConnectionTunnelOptionsSpecificationOutput) TunnelIpsecConfig added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) TunnelIpsecConfig() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput

IPsec configuration in Tunnel. See `tunnelIpsecConfig` below.

func (ConnectionTunnelOptionsSpecificationOutput) ZoneNo added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationOutput) ZoneNo() pulumi.StringPtrOutput

The zoneNo of tunnel.

type ConnectionTunnelOptionsSpecificationTunnelBgpConfig added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelBgpConfig struct {
	// Whether BGP function is turned on.
	BgpStatus  *string `pulumi:"bgpStatus"`
	LocalAsn   *string `pulumi:"localAsn"`
	LocalBgpIp *string `pulumi:"localBgpIp"`
	// Peer asn.
	PeerAsn *string `pulumi:"peerAsn"`
	// Peer bgp ip.
	PeerBgpIp  *string `pulumi:"peerBgpIp"`
	TunnelCidr *string `pulumi:"tunnelCidr"`
}

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs struct {
	// Whether BGP function is turned on.
	BgpStatus  pulumi.StringPtrInput `pulumi:"bgpStatus"`
	LocalAsn   pulumi.StringPtrInput `pulumi:"localAsn"`
	LocalBgpIp pulumi.StringPtrInput `pulumi:"localBgpIp"`
	// Peer asn.
	PeerAsn pulumi.StringPtrInput `pulumi:"peerAsn"`
	// Peer bgp ip.
	PeerBgpIp  pulumi.StringPtrInput `pulumi:"peerBgpIp"`
	TunnelCidr pulumi.StringPtrInput `pulumi:"tunnelCidr"`
}

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput() ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutputWithContext added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigInput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigInput interface {
	pulumi.Input

	ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput() ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput
	ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext(context.Context) ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput
}

ConnectionTunnelOptionsSpecificationTunnelBgpConfigInput is an input type that accepts ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs and ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput values. You can construct a concrete instance of `ConnectionTunnelOptionsSpecificationTunnelBgpConfigInput` via: 

ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs{...}

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput struct{ *pulumi.OutputState }

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) BgpStatus added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) BgpStatus() pulumi.StringPtrOutput

Whether BGP function is turned on.

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) LocalAsn added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) LocalAsn() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) LocalBgpIp added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) LocalBgpIp() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) PeerAsn added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) PeerAsn() pulumi.StringPtrOutput

Peer asn.

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) PeerBgpIp added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) PeerBgpIp() pulumi.StringPtrOutput

Peer bgp ip.

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput() ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) TunnelCidr added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) TunnelCidr() pulumi.StringPtrOutput

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrInput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrInput interface {
	pulumi.Input

	ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput
	ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutputWithContext(context.Context) ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput
}

ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrInput is an input type that accepts ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs, ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtr and ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput values. You can construct a concrete instance of `ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrInput` via: 

        ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs{...}

or:

        nil

func ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtr added in v3.48.0 

func ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtr(v *ConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrInput

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) BgpStatus added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) BgpStatus() pulumi.StringPtrOutput

Whether BGP function is turned on.

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) Elem added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) Elem() ConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) LocalAsn added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) LocalAsn() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) LocalBgpIp added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) LocalBgpIp() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) PeerAsn added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) PeerAsn() pulumi.StringPtrOutput

Peer asn.

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) PeerBgpIp added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) PeerBgpIp() pulumi.StringPtrOutput

Peer bgp ip.

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) TunnelCidr added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelBgpConfigPtrOutput) TunnelCidr() pulumi.StringPtrOutput

type ConnectionTunnelOptionsSpecificationTunnelIkeConfig added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIkeConfig struct {
	IkeAuthAlg  *string `pulumi:"ikeAuthAlg"`
	IkeEncAlg   *string `pulumi:"ikeEncAlg"`
	IkeLifetime *int    `pulumi:"ikeLifetime"`
	IkeMode     *string `pulumi:"ikeMode"`
	IkePfs      *string `pulumi:"ikePfs"`
	IkeVersion  *string `pulumi:"ikeVersion"`
	LocalId     *string `pulumi:"localId"`
	Psk         *string `pulumi:"psk"`
	RemoteId    *string `pulumi:"remoteId"`
}

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs struct {
	IkeAuthAlg  pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	IkeEncAlg   pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	IkeLifetime pulumi.IntPtrInput    `pulumi:"ikeLifetime"`
	IkeMode     pulumi.StringPtrInput `pulumi:"ikeMode"`
	IkePfs      pulumi.StringPtrInput `pulumi:"ikePfs"`
	IkeVersion  pulumi.StringPtrInput `pulumi:"ikeVersion"`
	LocalId     pulumi.StringPtrInput `pulumi:"localId"`
	Psk         pulumi.StringPtrInput `pulumi:"psk"`
	RemoteId    pulumi.StringPtrInput `pulumi:"remoteId"`
}

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput() ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutputWithContext added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigInput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigInput interface {
	pulumi.Input

	ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput() ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput
	ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext(context.Context) ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput
}

ConnectionTunnelOptionsSpecificationTunnelIkeConfigInput is an input type that accepts ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs and ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput values. You can construct a concrete instance of `ConnectionTunnelOptionsSpecificationTunnelIkeConfigInput` via: 

ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs{...}

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput struct{ *pulumi.OutputState }

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeAuthAlg added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeEncAlg added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeLifetime added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeMode added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkePfs added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeVersion added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) LocalId added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) LocalId() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) Psk added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) Psk() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) RemoteId added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) RemoteId() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput() ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrInput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrInput interface {
	pulumi.Input

	ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput
	ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutputWithContext(context.Context) ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput
}

ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrInput is an input type that accepts ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs, ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtr and ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput values. You can construct a concrete instance of `ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrInput` via: 

        ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs{...}

or:

        nil

func ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtr added in v3.48.0 

func ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtr(v *ConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrInput

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) Elem added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) Elem() ConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeAuthAlg added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeAuthAlg() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeEncAlg added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeEncAlg() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeLifetime added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeLifetime() pulumi.IntPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeMode added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeMode() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkePfs added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkePfs() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeVersion added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) IkeVersion() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) LocalId added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) LocalId() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) Psk added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) Psk() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) RemoteId added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) RemoteId() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIkeConfigPtrOutput

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfig added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfig struct {
	IpsecAuthAlg  *string `pulumi:"ipsecAuthAlg"`
	IpsecEncAlg   *string `pulumi:"ipsecEncAlg"`
	IpsecLifetime *int    `pulumi:"ipsecLifetime"`
	IpsecPfs      *string `pulumi:"ipsecPfs"`
}

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs struct {
	IpsecAuthAlg  pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	IpsecEncAlg   pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	IpsecLifetime pulumi.IntPtrInput    `pulumi:"ipsecLifetime"`
	IpsecPfs      pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutputWithContext added in v3.48.0 

func (i ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput interface {
	pulumi.Input

	ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput
	ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext(context.Context) ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput
}

ConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput is an input type that accepts ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs and ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput values. You can construct a concrete instance of `ConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput` via: 

ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs{...}

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput struct{ *pulumi.OutputState }

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecAuthAlg added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecEncAlg added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecLifetime added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecPfs added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrInput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrInput interface {
	pulumi.Input

	ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput
	ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutputWithContext(context.Context) ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput
}

ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrInput is an input type that accepts ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs, ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtr and ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput values. You can construct a concrete instance of `ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrInput` via: 

        ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs{...}

or:

        nil

func ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtr added in v3.48.0 

func ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtr(v *ConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrInput

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput added in v3.48.0 

type ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput struct{ *pulumi.OutputState }

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) Elem added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) Elem() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) ElementType added in v3.48.0 

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) ElementType() reflect.Type

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) IpsecAuthAlg added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) IpsecAuthAlg() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) IpsecEncAlg added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) IpsecEncAlg() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) IpsecLifetime added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) IpsecLifetime() pulumi.IntPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) IpsecPfs added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) IpsecPfs() pulumi.StringPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput() ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput

func (ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutputWithContext added in v3.48.0 

func (o ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput) ToConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutputWithContext(ctx context.Context) ConnectionTunnelOptionsSpecificationTunnelIpsecConfigPtrOutput

type CustomerGateway 

type CustomerGateway struct {
	pulumi.CustomResourceState

	// Asn.
	Asn pulumi.StringPtrOutput `pulumi:"asn"`
	// The time when the customer gateway was created.
	CreateTime pulumi.IntOutput `pulumi:"createTime"`
	// The name of the customer gateway.
	CustomerGatewayName pulumi.StringOutput `pulumi:"customerGatewayName"`
	// The description of the customer gateway.
	Description pulumi.StringPtrOutput `pulumi:"description"`
	// The IP address of the customer gateway.
	IpAddress pulumi.StringOutput `pulumi:"ipAddress"`
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'customer_gateway_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.210.0. New field 'customer_gateway_name' instead.
	Name pulumi.StringOutput `pulumi:"name"`
	// tag.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	Tags pulumi.MapOutput `pulumi:"tags"`
}

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		name := "terraform-example"
		if param := cfg.Get("name"); param != "" {
			name = param
		}
		_, err := vpn.NewCustomerGateway(ctx, "default", &vpn.CustomerGatewayArgs{
			Description:         pulumi.String(name),
			IpAddress:           pulumi.String("4.3.2.10"),
			Asn:                 pulumi.String("1219002"),
			CustomerGatewayName: pulumi.String(name),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN customer gateway can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/customerGateway:CustomerGateway example <id> ```

func GetCustomerGateway 

func GetCustomerGateway(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *CustomerGatewayState, opts ...pulumi.ResourceOption) (*CustomerGateway, error)

GetCustomerGateway gets an existing CustomerGateway resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewCustomerGateway 

func NewCustomerGateway(ctx *pulumi.Context,
	name string, args *CustomerGatewayArgs, opts ...pulumi.ResourceOption) (*CustomerGateway, error)

NewCustomerGateway registers a new resource with the given unique name, arguments, and options.

func (*CustomerGateway) ElementType 

func (*CustomerGateway) ElementType() reflect.Type

func (*CustomerGateway) ToCustomerGatewayOutput 

func (i *CustomerGateway) ToCustomerGatewayOutput() CustomerGatewayOutput

func (*CustomerGateway) ToCustomerGatewayOutputWithContext 

func (i *CustomerGateway) ToCustomerGatewayOutputWithContext(ctx context.Context) CustomerGatewayOutput

type CustomerGatewayArgs 

type CustomerGatewayArgs struct {
	// Asn.
	Asn pulumi.StringPtrInput
	// The name of the customer gateway.
	CustomerGatewayName pulumi.StringPtrInput
	// The description of the customer gateway.
	Description pulumi.StringPtrInput
	// The IP address of the customer gateway.
	IpAddress pulumi.StringInput
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'customer_gateway_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.210.0. New field 'customer_gateway_name' instead.
	Name pulumi.StringPtrInput
	// tag.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	Tags pulumi.MapInput
}

The set of arguments for constructing a CustomerGateway resource.

func (CustomerGatewayArgs) ElementType 

func (CustomerGatewayArgs) ElementType() reflect.Type

type CustomerGatewayArray 

type CustomerGatewayArray []CustomerGatewayInput

func (CustomerGatewayArray) ElementType 

func (CustomerGatewayArray) ElementType() reflect.Type

func (CustomerGatewayArray) ToCustomerGatewayArrayOutput 

func (i CustomerGatewayArray) ToCustomerGatewayArrayOutput() CustomerGatewayArrayOutput

func (CustomerGatewayArray) ToCustomerGatewayArrayOutputWithContext 

func (i CustomerGatewayArray) ToCustomerGatewayArrayOutputWithContext(ctx context.Context) CustomerGatewayArrayOutput

type CustomerGatewayArrayInput 

type CustomerGatewayArrayInput interface {
	pulumi.Input

	ToCustomerGatewayArrayOutput() CustomerGatewayArrayOutput
	ToCustomerGatewayArrayOutputWithContext(context.Context) CustomerGatewayArrayOutput
}

CustomerGatewayArrayInput is an input type that accepts CustomerGatewayArray and CustomerGatewayArrayOutput values. You can construct a concrete instance of `CustomerGatewayArrayInput` via: 

CustomerGatewayArray{ CustomerGatewayArgs{...} }

type CustomerGatewayArrayOutput 

type CustomerGatewayArrayOutput struct{ *pulumi.OutputState }

func (CustomerGatewayArrayOutput) ElementType 

func (CustomerGatewayArrayOutput) ElementType() reflect.Type

func (CustomerGatewayArrayOutput) Index 

func (o CustomerGatewayArrayOutput) Index(i pulumi.IntInput) CustomerGatewayOutput

func (CustomerGatewayArrayOutput) ToCustomerGatewayArrayOutput 

func (o CustomerGatewayArrayOutput) ToCustomerGatewayArrayOutput() CustomerGatewayArrayOutput

func (CustomerGatewayArrayOutput) ToCustomerGatewayArrayOutputWithContext 

func (o CustomerGatewayArrayOutput) ToCustomerGatewayArrayOutputWithContext(ctx context.Context) CustomerGatewayArrayOutput

type CustomerGatewayInput 

type CustomerGatewayInput interface {
	pulumi.Input

	ToCustomerGatewayOutput() CustomerGatewayOutput
	ToCustomerGatewayOutputWithContext(ctx context.Context) CustomerGatewayOutput
}

type CustomerGatewayMap 

type CustomerGatewayMap map[string]CustomerGatewayInput

func (CustomerGatewayMap) ElementType 

func (CustomerGatewayMap) ElementType() reflect.Type

func (CustomerGatewayMap) ToCustomerGatewayMapOutput 

func (i CustomerGatewayMap) ToCustomerGatewayMapOutput() CustomerGatewayMapOutput

func (CustomerGatewayMap) ToCustomerGatewayMapOutputWithContext 

func (i CustomerGatewayMap) ToCustomerGatewayMapOutputWithContext(ctx context.Context) CustomerGatewayMapOutput

type CustomerGatewayMapInput 

type CustomerGatewayMapInput interface {
	pulumi.Input

	ToCustomerGatewayMapOutput() CustomerGatewayMapOutput
	ToCustomerGatewayMapOutputWithContext(context.Context) CustomerGatewayMapOutput
}

CustomerGatewayMapInput is an input type that accepts CustomerGatewayMap and CustomerGatewayMapOutput values. You can construct a concrete instance of `CustomerGatewayMapInput` via: 

CustomerGatewayMap{ "key": CustomerGatewayArgs{...} }

type CustomerGatewayMapOutput 

type CustomerGatewayMapOutput struct{ *pulumi.OutputState }

func (CustomerGatewayMapOutput) ElementType 

func (CustomerGatewayMapOutput) ElementType() reflect.Type

func (CustomerGatewayMapOutput) MapIndex 

func (o CustomerGatewayMapOutput) MapIndex(k pulumi.StringInput) CustomerGatewayOutput

func (CustomerGatewayMapOutput) ToCustomerGatewayMapOutput 

func (o CustomerGatewayMapOutput) ToCustomerGatewayMapOutput() CustomerGatewayMapOutput

func (CustomerGatewayMapOutput) ToCustomerGatewayMapOutputWithContext 

func (o CustomerGatewayMapOutput) ToCustomerGatewayMapOutputWithContext(ctx context.Context) CustomerGatewayMapOutput

type CustomerGatewayOutput 

type CustomerGatewayOutput struct{ *pulumi.OutputState }

func (CustomerGatewayOutput) Asn added in v3.27.0 

func (o CustomerGatewayOutput) Asn() pulumi.StringPtrOutput

Asn.

func (CustomerGatewayOutput) CreateTime added in v3.48.0 

func (o CustomerGatewayOutput) CreateTime() pulumi.IntOutput

The time when the customer gateway was created.

func (CustomerGatewayOutput) CustomerGatewayName added in v3.48.0 

func (o CustomerGatewayOutput) CustomerGatewayName() pulumi.StringOutput

The name of the customer gateway.

func (CustomerGatewayOutput) Description added in v3.27.0 

func (o CustomerGatewayOutput) Description() pulumi.StringPtrOutput

The description of the customer gateway.

func (CustomerGatewayOutput) ElementType 

func (CustomerGatewayOutput) ElementType() reflect.Type

func (CustomerGatewayOutput) IpAddress added in v3.27.0 

func (o CustomerGatewayOutput) IpAddress() pulumi.StringOutput

The IP address of the customer gateway.

func (CustomerGatewayOutput) Name deprecated added in v3.27.0 

func (o CustomerGatewayOutput) Name() pulumi.StringOutput

. Field 'name' has been deprecated from provider version 1.216.0. New field 'customer_gateway_name' instead.

Deprecated: Field 'name' has been deprecated since provider version 1.210.0. New field 'customer_gateway_name' instead.

func (CustomerGatewayOutput) Tags added in v3.48.0 

func (o CustomerGatewayOutput) Tags() pulumi.MapOutput

tag.

The following arguments will be discarded. Please use new fields as soon as possible:

func (CustomerGatewayOutput) ToCustomerGatewayOutput 

func (o CustomerGatewayOutput) ToCustomerGatewayOutput() CustomerGatewayOutput

func (CustomerGatewayOutput) ToCustomerGatewayOutputWithContext 

func (o CustomerGatewayOutput) ToCustomerGatewayOutputWithContext(ctx context.Context) CustomerGatewayOutput

type CustomerGatewayState 

type CustomerGatewayState struct {
	// Asn.
	Asn pulumi.StringPtrInput
	// The time when the customer gateway was created.
	CreateTime pulumi.IntPtrInput
	// The name of the customer gateway.
	CustomerGatewayName pulumi.StringPtrInput
	// The description of the customer gateway.
	Description pulumi.StringPtrInput
	// The IP address of the customer gateway.
	IpAddress pulumi.StringPtrInput
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'customer_gateway_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.210.0. New field 'customer_gateway_name' instead.
	Name pulumi.StringPtrInput
	// tag.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	Tags pulumi.MapInput
}

func (CustomerGatewayState) ElementType 

func (CustomerGatewayState) ElementType() reflect.Type

type Gateway 

type Gateway struct {
	pulumi.CustomResourceState

	// Whether to pay automatically. Default value: `true`. Valid values:
	AutoPay pulumi.BoolPtrOutput `pulumi:"autoPay"`
	// Whether to automatically propagate the BGP route to the VPC. Value:  true: Propagate automatically.  false: does not propagate automatically.
	AutoPropagate pulumi.BoolPtrOutput `pulumi:"autoPropagate"`
	// The Bandwidth specification of the VPN gateway. Unit: Mbps.  If you want to create a public VPN gateway, the value is 5, 10, 20, 50, 100, 200, 500, or 1000. If you want to create a private VPN gateway, the value is 200 or 1000.
	Bandwidth pulumi.IntOutput `pulumi:"bandwidth"`
	// The business status of the VPN gateway.
	BusinessStatus pulumi.StringOutput `pulumi:"businessStatus"`
	// The time when the VPN gateway was created.
	CreateTime pulumi.IntOutput `pulumi:"createTime"`
	// The description of the VPN gateway.
	Description pulumi.StringPtrOutput `pulumi:"description"`
	// The backup public IP address of the VPN gateway. The second IP address assigned by the system to create an IPsec-VPN connection. This parameter is returned only when the VPN gateway supports the dual-tunnel mode.
	DisasterRecoveryInternetIp pulumi.StringOutput `pulumi:"disasterRecoveryInternetIp"`
	// The ID of the backup VSwitch to which the VPN gateway is attached.
	DisasterRecoveryVswitchId pulumi.StringOutput `pulumi:"disasterRecoveryVswitchId"`
	// Enable or Disable IPSec VPN. At least one type of VPN should be enabled.
	EnableIpsec pulumi.BoolPtrOutput `pulumi:"enableIpsec"`
	// Enable or Disable SSL VPN.  At least one type of VPN should be enabled.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	EnableSsl pulumi.BoolPtrOutput `pulumi:"enableSsl"`
	// . Field 'instance_charge_type' has been deprecated from provider version 1.216.0. New field 'payment_type' instead.
	//
	// Deprecated: Field 'instance_charge_type' has been deprecated since provider version 1.215.0. New field 'payment_type' instead.
	InstanceChargeType pulumi.StringOutput `pulumi:"instanceChargeType"`
	// The internet ip of the VPN.
	InternetIp pulumi.StringOutput `pulumi:"internetIp"`
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'vpn_gateway_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.215.0. New field 'vpn_gateway_name' instead.
	Name pulumi.StringOutput `pulumi:"name"`
	// The network type of the VPN gateway. Value:  public (default): public VPN gateway. private: private network VPN gateway.
	NetworkType pulumi.StringOutput `pulumi:"networkType"`
	// Type of payment. Value: Subscription: prepaid PayAsYouGo: Post-paid.
	PaymentType pulumi.StringOutput `pulumi:"paymentType"`
	// The filed is only required while the InstanceChargeType is PrePaid. Valid values: [1-9, 12, 24, 36]. Default to 1.
	Period pulumi.IntPtrOutput `pulumi:"period"`
	// The ID of the resource group.
	ResourceGroupId pulumi.StringOutput `pulumi:"resourceGroupId"`
	// Maximum number of clients.
	SslConnections pulumi.IntOutput `pulumi:"sslConnections"`
	// The IP address of the SSL-VPN connection. This parameter is returned only when the VPN gateway is a public VPN gateway and supports only the single-tunnel mode. In addition, the VPN gateway must have the SSL-VPN feature enabled.
	SslVpnInternetIp pulumi.StringOutput `pulumi:"sslVpnInternetIp"`
	// The status of the resource.
	Status pulumi.StringOutput `pulumi:"status"`
	// The Tag of.
	Tags pulumi.MapOutput `pulumi:"tags"`
	// The ID of the VPC to which the VPN gateway belongs.
	VpcId pulumi.StringOutput `pulumi:"vpcId"`
	// The name of the VPN gateway.
	VpnGatewayName pulumi.StringOutput `pulumi:"vpnGatewayName"`
	// The VPN gateway type. Value:  Normal (default): Normal type. NationalStandard: National Secret type.
	VpnType pulumi.StringOutput `pulumi:"vpnType"`
	// The ID of the VSwitch to which the VPN gateway is attached.
	VswitchId pulumi.StringOutput `pulumi:"vswitchId"`
}

## Import

VPN gateway can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/gateway:Gateway example <id> ```

func GetGateway 

func GetGateway(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *GatewayState, opts ...pulumi.ResourceOption) (*Gateway, error)

GetGateway gets an existing Gateway resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewGateway 

func NewGateway(ctx *pulumi.Context,
	name string, args *GatewayArgs, opts ...pulumi.ResourceOption) (*Gateway, error)

NewGateway registers a new resource with the given unique name, arguments, and options.

func (*Gateway) ElementType 

func (*Gateway) ElementType() reflect.Type

func (*Gateway) ToGatewayOutput 

func (i *Gateway) ToGatewayOutput() GatewayOutput

func (*Gateway) ToGatewayOutputWithContext 

func (i *Gateway) ToGatewayOutputWithContext(ctx context.Context) GatewayOutput

type GatewayArgs 

type GatewayArgs struct {
	// Whether to pay automatically. Default value: `true`. Valid values:
	AutoPay pulumi.BoolPtrInput
	// Whether to automatically propagate the BGP route to the VPC. Value:  true: Propagate automatically.  false: does not propagate automatically.
	AutoPropagate pulumi.BoolPtrInput
	// The Bandwidth specification of the VPN gateway. Unit: Mbps.  If you want to create a public VPN gateway, the value is 5, 10, 20, 50, 100, 200, 500, or 1000. If you want to create a private VPN gateway, the value is 200 or 1000.
	Bandwidth pulumi.IntInput
	// The description of the VPN gateway.
	Description pulumi.StringPtrInput
	// The ID of the backup VSwitch to which the VPN gateway is attached.
	DisasterRecoveryVswitchId pulumi.StringPtrInput
	// Enable or Disable IPSec VPN. At least one type of VPN should be enabled.
	EnableIpsec pulumi.BoolPtrInput
	// Enable or Disable SSL VPN.  At least one type of VPN should be enabled.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	EnableSsl pulumi.BoolPtrInput
	// . Field 'instance_charge_type' has been deprecated from provider version 1.216.0. New field 'payment_type' instead.
	//
	// Deprecated: Field 'instance_charge_type' has been deprecated since provider version 1.215.0. New field 'payment_type' instead.
	InstanceChargeType pulumi.StringPtrInput
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'vpn_gateway_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.215.0. New field 'vpn_gateway_name' instead.
	Name pulumi.StringPtrInput
	// The network type of the VPN gateway. Value:  public (default): public VPN gateway. private: private network VPN gateway.
	NetworkType pulumi.StringPtrInput
	// Type of payment. Value: Subscription: prepaid PayAsYouGo: Post-paid.
	PaymentType pulumi.StringPtrInput
	// The filed is only required while the InstanceChargeType is PrePaid. Valid values: [1-9, 12, 24, 36]. Default to 1.
	Period pulumi.IntPtrInput
	// The ID of the resource group.
	ResourceGroupId pulumi.StringPtrInput
	// Maximum number of clients.
	SslConnections pulumi.IntPtrInput
	// The Tag of.
	Tags pulumi.MapInput
	// The ID of the VPC to which the VPN gateway belongs.
	VpcId pulumi.StringInput
	// The name of the VPN gateway.
	VpnGatewayName pulumi.StringPtrInput
	// The VPN gateway type. Value:  Normal (default): Normal type. NationalStandard: National Secret type.
	VpnType pulumi.StringPtrInput
	// The ID of the VSwitch to which the VPN gateway is attached.
	VswitchId pulumi.StringPtrInput
}

The set of arguments for constructing a Gateway resource.

func (GatewayArgs) ElementType 

func (GatewayArgs) ElementType() reflect.Type

type GatewayArray 

type GatewayArray []GatewayInput

func (GatewayArray) ElementType 

func (GatewayArray) ElementType() reflect.Type

func (GatewayArray) ToGatewayArrayOutput 

func (i GatewayArray) ToGatewayArrayOutput() GatewayArrayOutput

func (GatewayArray) ToGatewayArrayOutputWithContext 

func (i GatewayArray) ToGatewayArrayOutputWithContext(ctx context.Context) GatewayArrayOutput

type GatewayArrayInput 

type GatewayArrayInput interface {
	pulumi.Input

	ToGatewayArrayOutput() GatewayArrayOutput
	ToGatewayArrayOutputWithContext(context.Context) GatewayArrayOutput
}

GatewayArrayInput is an input type that accepts GatewayArray and GatewayArrayOutput values. You can construct a concrete instance of `GatewayArrayInput` via: 

GatewayArray{ GatewayArgs{...} }

type GatewayArrayOutput 

type GatewayArrayOutput struct{ *pulumi.OutputState }

func (GatewayArrayOutput) ElementType 

func (GatewayArrayOutput) ElementType() reflect.Type

func (GatewayArrayOutput) Index 

func (o GatewayArrayOutput) Index(i pulumi.IntInput) GatewayOutput

func (GatewayArrayOutput) ToGatewayArrayOutput 

func (o GatewayArrayOutput) ToGatewayArrayOutput() GatewayArrayOutput

func (GatewayArrayOutput) ToGatewayArrayOutputWithContext 

func (o GatewayArrayOutput) ToGatewayArrayOutputWithContext(ctx context.Context) GatewayArrayOutput

type GatewayInput 

type GatewayInput interface {
	pulumi.Input

	ToGatewayOutput() GatewayOutput
	ToGatewayOutputWithContext(ctx context.Context) GatewayOutput
}

type GatewayMap 

type GatewayMap map[string]GatewayInput

func (GatewayMap) ElementType 

func (GatewayMap) ElementType() reflect.Type

func (GatewayMap) ToGatewayMapOutput 

func (i GatewayMap) ToGatewayMapOutput() GatewayMapOutput

func (GatewayMap) ToGatewayMapOutputWithContext 

func (i GatewayMap) ToGatewayMapOutputWithContext(ctx context.Context) GatewayMapOutput

type GatewayMapInput 

type GatewayMapInput interface {
	pulumi.Input

	ToGatewayMapOutput() GatewayMapOutput
	ToGatewayMapOutputWithContext(context.Context) GatewayMapOutput
}

GatewayMapInput is an input type that accepts GatewayMap and GatewayMapOutput values. You can construct a concrete instance of `GatewayMapInput` via: 

GatewayMap{ "key": GatewayArgs{...} }

type GatewayMapOutput 

type GatewayMapOutput struct{ *pulumi.OutputState }

func (GatewayMapOutput) ElementType 

func (GatewayMapOutput) ElementType() reflect.Type

func (GatewayMapOutput) MapIndex 

func (o GatewayMapOutput) MapIndex(k pulumi.StringInput) GatewayOutput

func (GatewayMapOutput) ToGatewayMapOutput 

func (o GatewayMapOutput) ToGatewayMapOutput() GatewayMapOutput

func (GatewayMapOutput) ToGatewayMapOutputWithContext 

func (o GatewayMapOutput) ToGatewayMapOutputWithContext(ctx context.Context) GatewayMapOutput

type GatewayOutput 

type GatewayOutput struct{ *pulumi.OutputState }

func (GatewayOutput) AutoPay added in v3.27.0 

func (o GatewayOutput) AutoPay() pulumi.BoolPtrOutput

Whether to pay automatically. Default value: `true`. Valid values:

func (GatewayOutput) AutoPropagate added in v3.29.0 

func (o GatewayOutput) AutoPropagate() pulumi.BoolPtrOutput

Whether to automatically propagate the BGP route to the VPC. Value: true: Propagate automatically. false: does not propagate automatically.

func (GatewayOutput) Bandwidth added in v3.27.0 

func (o GatewayOutput) Bandwidth() pulumi.IntOutput

The Bandwidth specification of the VPN gateway. Unit: Mbps. If you want to create a public VPN gateway, the value is 5, 10, 20, 50, 100, 200, 500, or 1000. If you want to create a private VPN gateway, the value is 200 or 1000.

func (GatewayOutput) BusinessStatus added in v3.27.0 

func (o GatewayOutput) BusinessStatus() pulumi.StringOutput

The business status of the VPN gateway.

func (GatewayOutput) CreateTime added in v3.48.0 

func (o GatewayOutput) CreateTime() pulumi.IntOutput

The time when the VPN gateway was created.

func (GatewayOutput) Description added in v3.27.0 

func (o GatewayOutput) Description() pulumi.StringPtrOutput

The description of the VPN gateway.

func (GatewayOutput) DisasterRecoveryInternetIp added in v3.50.0 

func (o GatewayOutput) DisasterRecoveryInternetIp() pulumi.StringOutput

The backup public IP address of the VPN gateway. The second IP address assigned by the system to create an IPsec-VPN connection. This parameter is returned only when the VPN gateway supports the dual-tunnel mode.

func (GatewayOutput) DisasterRecoveryVswitchId added in v3.48.0 

func (o GatewayOutput) DisasterRecoveryVswitchId() pulumi.StringOutput

The ID of the backup VSwitch to which the VPN gateway is attached.

func (GatewayOutput) ElementType 

func (GatewayOutput) ElementType() reflect.Type

func (GatewayOutput) EnableIpsec added in v3.27.0 

func (o GatewayOutput) EnableIpsec() pulumi.BoolPtrOutput

Enable or Disable IPSec VPN. At least one type of VPN should be enabled.

func (GatewayOutput) EnableSsl added in v3.27.0 

func (o GatewayOutput) EnableSsl() pulumi.BoolPtrOutput

Enable or Disable SSL VPN. At least one type of VPN should be enabled.

The following arguments will be discarded. Please use new fields as soon as possible:

func (GatewayOutput) InstanceChargeType deprecated added in v3.27.0 

func (o GatewayOutput) InstanceChargeType() pulumi.StringOutput

. Field 'instance_charge_type' has been deprecated from provider version 1.216.0. New field 'payment_type' instead.

Deprecated: Field 'instance_charge_type' has been deprecated since provider version 1.215.0. New field 'payment_type' instead.

func (GatewayOutput) InternetIp added in v3.27.0 

func (o GatewayOutput) InternetIp() pulumi.StringOutput

The internet ip of the VPN.

func (GatewayOutput) Name deprecated added in v3.27.0 

func (o GatewayOutput) Name() pulumi.StringOutput

. Field 'name' has been deprecated from provider version 1.216.0. New field 'vpn_gateway_name' instead.

Deprecated: Field 'name' has been deprecated since provider version 1.215.0. New field 'vpn_gateway_name' instead.

func (GatewayOutput) NetworkType added in v3.29.0 

func (o GatewayOutput) NetworkType() pulumi.StringOutput

The network type of the VPN gateway. Value: public (default): public VPN gateway. private: private network VPN gateway.

func (GatewayOutput) PaymentType added in v3.48.0 

func (o GatewayOutput) PaymentType() pulumi.StringOutput

Type of payment. Value: Subscription: prepaid PayAsYouGo: Post-paid.

func (GatewayOutput) Period added in v3.27.0 

func (o GatewayOutput) Period() pulumi.IntPtrOutput

The filed is only required while the InstanceChargeType is PrePaid. Valid values: [1-9, 12, 24, 36]. Default to 1.

func (GatewayOutput) ResourceGroupId added in v3.48.0 

func (o GatewayOutput) ResourceGroupId() pulumi.StringOutput

The ID of the resource group.

func (GatewayOutput) SslConnections added in v3.27.0 

func (o GatewayOutput) SslConnections() pulumi.IntOutput

Maximum number of clients.

func (GatewayOutput) SslVpnInternetIp added in v3.49.1 

func (o GatewayOutput) SslVpnInternetIp() pulumi.StringOutput

The IP address of the SSL-VPN connection. This parameter is returned only when the VPN gateway is a public VPN gateway and supports only the single-tunnel mode. In addition, the VPN gateway must have the SSL-VPN feature enabled.

func (GatewayOutput) Status added in v3.27.0 

func (o GatewayOutput) Status() pulumi.StringOutput

The status of the resource.

func (GatewayOutput) Tags added in v3.27.0 

func (o GatewayOutput) Tags() pulumi.MapOutput

The Tag of.

func (GatewayOutput) ToGatewayOutput 

func (o GatewayOutput) ToGatewayOutput() GatewayOutput

func (GatewayOutput) ToGatewayOutputWithContext 

func (o GatewayOutput) ToGatewayOutputWithContext(ctx context.Context) GatewayOutput

func (GatewayOutput) VpcId added in v3.27.0 

func (o GatewayOutput) VpcId() pulumi.StringOutput

The ID of the VPC to which the VPN gateway belongs.

func (GatewayOutput) VpnGatewayName added in v3.48.0 

func (o GatewayOutput) VpnGatewayName() pulumi.StringOutput

The name of the VPN gateway.

func (GatewayOutput) VpnType added in v3.48.0 

func (o GatewayOutput) VpnType() pulumi.StringOutput

The VPN gateway type. Value: Normal (default): Normal type. NationalStandard: National Secret type.

func (GatewayOutput) VswitchId added in v3.27.0 

func (o GatewayOutput) VswitchId() pulumi.StringOutput

The ID of the VSwitch to which the VPN gateway is attached.

type GatewayState 

type GatewayState struct {
	// Whether to pay automatically. Default value: `true`. Valid values:
	AutoPay pulumi.BoolPtrInput
	// Whether to automatically propagate the BGP route to the VPC. Value:  true: Propagate automatically.  false: does not propagate automatically.
	AutoPropagate pulumi.BoolPtrInput
	// The Bandwidth specification of the VPN gateway. Unit: Mbps.  If you want to create a public VPN gateway, the value is 5, 10, 20, 50, 100, 200, 500, or 1000. If you want to create a private VPN gateway, the value is 200 or 1000.
	Bandwidth pulumi.IntPtrInput
	// The business status of the VPN gateway.
	BusinessStatus pulumi.StringPtrInput
	// The time when the VPN gateway was created.
	CreateTime pulumi.IntPtrInput
	// The description of the VPN gateway.
	Description pulumi.StringPtrInput
	// The backup public IP address of the VPN gateway. The second IP address assigned by the system to create an IPsec-VPN connection. This parameter is returned only when the VPN gateway supports the dual-tunnel mode.
	DisasterRecoveryInternetIp pulumi.StringPtrInput
	// The ID of the backup VSwitch to which the VPN gateway is attached.
	DisasterRecoveryVswitchId pulumi.StringPtrInput
	// Enable or Disable IPSec VPN. At least one type of VPN should be enabled.
	EnableIpsec pulumi.BoolPtrInput
	// Enable or Disable SSL VPN.  At least one type of VPN should be enabled.
	//
	// The following arguments will be discarded. Please use new fields as soon as possible:
	EnableSsl pulumi.BoolPtrInput
	// . Field 'instance_charge_type' has been deprecated from provider version 1.216.0. New field 'payment_type' instead.
	//
	// Deprecated: Field 'instance_charge_type' has been deprecated since provider version 1.215.0. New field 'payment_type' instead.
	InstanceChargeType pulumi.StringPtrInput
	// The internet ip of the VPN.
	InternetIp pulumi.StringPtrInput
	// . Field 'name' has been deprecated from provider version 1.216.0. New field 'vpn_gateway_name' instead.
	//
	// Deprecated: Field 'name' has been deprecated since provider version 1.215.0. New field 'vpn_gateway_name' instead.
	Name pulumi.StringPtrInput
	// The network type of the VPN gateway. Value:  public (default): public VPN gateway. private: private network VPN gateway.
	NetworkType pulumi.StringPtrInput
	// Type of payment. Value: Subscription: prepaid PayAsYouGo: Post-paid.
	PaymentType pulumi.StringPtrInput
	// The filed is only required while the InstanceChargeType is PrePaid. Valid values: [1-9, 12, 24, 36]. Default to 1.
	Period pulumi.IntPtrInput
	// The ID of the resource group.
	ResourceGroupId pulumi.StringPtrInput
	// Maximum number of clients.
	SslConnections pulumi.IntPtrInput
	// The IP address of the SSL-VPN connection. This parameter is returned only when the VPN gateway is a public VPN gateway and supports only the single-tunnel mode. In addition, the VPN gateway must have the SSL-VPN feature enabled.
	SslVpnInternetIp pulumi.StringPtrInput
	// The status of the resource.
	Status pulumi.StringPtrInput
	// The Tag of.
	Tags pulumi.MapInput
	// The ID of the VPC to which the VPN gateway belongs.
	VpcId pulumi.StringPtrInput
	// The name of the VPN gateway.
	VpnGatewayName pulumi.StringPtrInput
	// The VPN gateway type. Value:  Normal (default): Normal type. NationalStandard: National Secret type.
	VpnType pulumi.StringPtrInput
	// The ID of the VSwitch to which the VPN gateway is attached.
	VswitchId pulumi.StringPtrInput
}

func (GatewayState) ElementType 

func (GatewayState) ElementType() reflect.Type

type GatewayVcoRoute added in v3.29.0 

type GatewayVcoRoute struct {
	pulumi.CustomResourceState

	// The next hop of the destination route.
	NextHop pulumi.StringOutput `pulumi:"nextHop"`
	// The destination network segment of the destination route.
	RouteDest pulumi.StringOutput `pulumi:"routeDest"`
	// The status of the vpn route entry.
	Status pulumi.StringOutput `pulumi:"status"`
	// The id of the vpn attachment.
	VpnConnectionId pulumi.StringOutput `pulumi:"vpnConnectionId"`
	// The weight value of the destination route. Valid values: `0`, `100`.
	Weight pulumi.IntOutput `pulumi:"weight"`
}

Provides a VPN Gateway Vco Route resource.

For information about VPN Gateway Vco Route and how to use it, see [What is Vco Route](https://www.alibabacloud.com/help/zh/virtual-private-cloud/latest/createvcorouteentry).

> **NOTE:** Available in v1.183.0+.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/cen"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		defaultInstance, err := cen.NewInstance(ctx, "default", &cen.InstanceArgs{
			CenInstanceName: pulumi.Any(name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouter, err := cen.NewTransitRouter(ctx, "default", &cen.TransitRouterArgs{
			CenId:                    defaultInstance.ID(),
			TransitRouterDescription: pulumi.String("desd"),
			TransitRouterName:        pulumi.Any(name),
		})
		if err != nil {
			return err
		}
		_default, err := cen.GetTransitRouterAvailableResources(ctx, nil, nil)
		if err != nil {
			return err
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "default", &vpn.CustomerGatewayArgs{
			Name:        pulumi.Any(name),
			IpAddress:   pulumi.String("42.104.22.210"),
			Asn:         pulumi.String("45014"),
			Description: pulumi.String("testAccVpnConnectionDesc"),
		})
		if err != nil {
			return err
		}
		defaultGatewayVpnAttachment, err := vpn.NewGatewayVpnAttachment(ctx, "default", &vpn.GatewayVpnAttachmentArgs{
			CustomerGatewayId: defaultCustomerGateway.ID(),
			NetworkType:       pulumi.String("public"),
			LocalSubnet:       pulumi.String("0.0.0.0/0"),
			RemoteSubnet:      pulumi.String("0.0.0.0/0"),
			EffectImmediately: pulumi.Bool(false),
			IkeConfig: &vpn.GatewayVpnAttachmentIkeConfigArgs{
				IkeAuthAlg:  pulumi.String("md5"),
				IkeEncAlg:   pulumi.String("des"),
				IkeVersion:  pulumi.String("ikev2"),
				IkeMode:     pulumi.String("main"),
				IkeLifetime: pulumi.Int(86400),
				Psk:         pulumi.String("tf-testvpn2"),
				IkePfs:      pulumi.String("group1"),
				RemoteId:    pulumi.String("testbob2"),
				LocalId:     pulumi.String("testalice2"),
			},
			IpsecConfig: &vpn.GatewayVpnAttachmentIpsecConfigArgs{
				IpsecPfs:      pulumi.String("group5"),
				IpsecEncAlg:   pulumi.String("des"),
				IpsecAuthAlg:  pulumi.String("md5"),
				IpsecLifetime: pulumi.Int(86400),
			},
			BgpConfig: &vpn.GatewayVpnAttachmentBgpConfigArgs{
				Enable:     pulumi.Bool(true),
				LocalAsn:   pulumi.Int(45014),
				TunnelCidr: pulumi.String("169.254.11.0/30"),
				LocalBgpIp: pulumi.String("169.254.11.1"),
			},
			HealthCheckConfig: &vpn.GatewayVpnAttachmentHealthCheckConfigArgs{
				Enable:   pulumi.Bool(true),
				Sip:      pulumi.String("192.168.1.1"),
				Dip:      pulumi.String("10.0.0.1"),
				Interval: pulumi.Int(10),
				Retry:    pulumi.Int(10),
				Policy:   pulumi.String("revoke_route"),
			},
			EnableDpd:          pulumi.Bool(true),
			EnableNatTraversal: pulumi.Bool(true),
			VpnAttachmentName:  pulumi.Any(name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouterVpnAttachment, err := cen.NewTransitRouterVpnAttachment(ctx, "default", &cen.TransitRouterVpnAttachmentArgs{
			AutoPublishRouteEnabled:            pulumi.Bool(false),
			TransitRouterAttachmentDescription: pulumi.Any(name),
			TransitRouterAttachmentName:        pulumi.Any(name),
			CenId:                              defaultTransitRouter.CenId,
			TransitRouterId:                    defaultTransitRouter.TransitRouterId,
			VpnId:                              defaultGatewayVpnAttachment.ID(),
			Zones: cen.TransitRouterVpnAttachmentZoneArray{
				&cen.TransitRouterVpnAttachmentZoneArgs{
					ZoneId: pulumi.String(_default.Resources[0].MasterZones[0]),
				},
			},
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewGatewayVcoRoute(ctx, "default", &vpn.GatewayVcoRouteArgs{
			RouteDest:       pulumi.String("192.168.12.0/24"),
			NextHop:         defaultTransitRouterVpnAttachment.VpnId,
			VpnConnectionId: defaultTransitRouterVpnAttachment.VpnId,
			Weight:          pulumi.Int(100),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN Gateway Vco Route can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/gatewayVcoRoute:GatewayVcoRoute example <vpn_connection_id>:<route_dest>:<next_hop>:<weight> ```

func GetGatewayVcoRoute added in v3.29.0 

func GetGatewayVcoRoute(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *GatewayVcoRouteState, opts ...pulumi.ResourceOption) (*GatewayVcoRoute, error)

GetGatewayVcoRoute gets an existing GatewayVcoRoute resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewGatewayVcoRoute added in v3.29.0 

func NewGatewayVcoRoute(ctx *pulumi.Context,
	name string, args *GatewayVcoRouteArgs, opts ...pulumi.ResourceOption) (*GatewayVcoRoute, error)

NewGatewayVcoRoute registers a new resource with the given unique name, arguments, and options.

func (*GatewayVcoRoute) ElementType added in v3.29.0 

func (*GatewayVcoRoute) ElementType() reflect.Type

func (*GatewayVcoRoute) ToGatewayVcoRouteOutput added in v3.29.0 

func (i *GatewayVcoRoute) ToGatewayVcoRouteOutput() GatewayVcoRouteOutput

func (*GatewayVcoRoute) ToGatewayVcoRouteOutputWithContext added in v3.29.0 

func (i *GatewayVcoRoute) ToGatewayVcoRouteOutputWithContext(ctx context.Context) GatewayVcoRouteOutput

type GatewayVcoRouteArgs added in v3.29.0 

type GatewayVcoRouteArgs struct {
	// The next hop of the destination route.
	NextHop pulumi.StringInput
	// The destination network segment of the destination route.
	RouteDest pulumi.StringInput
	// The id of the vpn attachment.
	VpnConnectionId pulumi.StringInput
	// The weight value of the destination route. Valid values: `0`, `100`.
	Weight pulumi.IntInput
}

The set of arguments for constructing a GatewayVcoRoute resource.

func (GatewayVcoRouteArgs) ElementType added in v3.29.0 

func (GatewayVcoRouteArgs) ElementType() reflect.Type

type GatewayVcoRouteArray added in v3.29.0 

type GatewayVcoRouteArray []GatewayVcoRouteInput

func (GatewayVcoRouteArray) ElementType added in v3.29.0 

func (GatewayVcoRouteArray) ElementType() reflect.Type

func (GatewayVcoRouteArray) ToGatewayVcoRouteArrayOutput added in v3.29.0 

func (i GatewayVcoRouteArray) ToGatewayVcoRouteArrayOutput() GatewayVcoRouteArrayOutput

func (GatewayVcoRouteArray) ToGatewayVcoRouteArrayOutputWithContext added in v3.29.0 

func (i GatewayVcoRouteArray) ToGatewayVcoRouteArrayOutputWithContext(ctx context.Context) GatewayVcoRouteArrayOutput

type GatewayVcoRouteArrayInput added in v3.29.0 

type GatewayVcoRouteArrayInput interface {
	pulumi.Input

	ToGatewayVcoRouteArrayOutput() GatewayVcoRouteArrayOutput
	ToGatewayVcoRouteArrayOutputWithContext(context.Context) GatewayVcoRouteArrayOutput
}

GatewayVcoRouteArrayInput is an input type that accepts GatewayVcoRouteArray and GatewayVcoRouteArrayOutput values. You can construct a concrete instance of `GatewayVcoRouteArrayInput` via: 

GatewayVcoRouteArray{ GatewayVcoRouteArgs{...} }

type GatewayVcoRouteArrayOutput added in v3.29.0 

type GatewayVcoRouteArrayOutput struct{ *pulumi.OutputState }

func (GatewayVcoRouteArrayOutput) ElementType added in v3.29.0 

func (GatewayVcoRouteArrayOutput) ElementType() reflect.Type

func (GatewayVcoRouteArrayOutput) Index added in v3.29.0 

func (o GatewayVcoRouteArrayOutput) Index(i pulumi.IntInput) GatewayVcoRouteOutput

func (GatewayVcoRouteArrayOutput) ToGatewayVcoRouteArrayOutput added in v3.29.0 

func (o GatewayVcoRouteArrayOutput) ToGatewayVcoRouteArrayOutput() GatewayVcoRouteArrayOutput

func (GatewayVcoRouteArrayOutput) ToGatewayVcoRouteArrayOutputWithContext added in v3.29.0 

func (o GatewayVcoRouteArrayOutput) ToGatewayVcoRouteArrayOutputWithContext(ctx context.Context) GatewayVcoRouteArrayOutput

type GatewayVcoRouteInput added in v3.29.0 

type GatewayVcoRouteInput interface {
	pulumi.Input

	ToGatewayVcoRouteOutput() GatewayVcoRouteOutput
	ToGatewayVcoRouteOutputWithContext(ctx context.Context) GatewayVcoRouteOutput
}

type GatewayVcoRouteMap added in v3.29.0 

type GatewayVcoRouteMap map[string]GatewayVcoRouteInput

func (GatewayVcoRouteMap) ElementType added in v3.29.0 

func (GatewayVcoRouteMap) ElementType() reflect.Type

func (GatewayVcoRouteMap) ToGatewayVcoRouteMapOutput added in v3.29.0 

func (i GatewayVcoRouteMap) ToGatewayVcoRouteMapOutput() GatewayVcoRouteMapOutput

func (GatewayVcoRouteMap) ToGatewayVcoRouteMapOutputWithContext added in v3.29.0 

func (i GatewayVcoRouteMap) ToGatewayVcoRouteMapOutputWithContext(ctx context.Context) GatewayVcoRouteMapOutput

type GatewayVcoRouteMapInput added in v3.29.0 

type GatewayVcoRouteMapInput interface {
	pulumi.Input

	ToGatewayVcoRouteMapOutput() GatewayVcoRouteMapOutput
	ToGatewayVcoRouteMapOutputWithContext(context.Context) GatewayVcoRouteMapOutput
}

GatewayVcoRouteMapInput is an input type that accepts GatewayVcoRouteMap and GatewayVcoRouteMapOutput values. You can construct a concrete instance of `GatewayVcoRouteMapInput` via: 

GatewayVcoRouteMap{ "key": GatewayVcoRouteArgs{...} }

type GatewayVcoRouteMapOutput added in v3.29.0 

type GatewayVcoRouteMapOutput struct{ *pulumi.OutputState }

func (GatewayVcoRouteMapOutput) ElementType added in v3.29.0 

func (GatewayVcoRouteMapOutput) ElementType() reflect.Type

func (GatewayVcoRouteMapOutput) MapIndex added in v3.29.0 

func (o GatewayVcoRouteMapOutput) MapIndex(k pulumi.StringInput) GatewayVcoRouteOutput

func (GatewayVcoRouteMapOutput) ToGatewayVcoRouteMapOutput added in v3.29.0 

func (o GatewayVcoRouteMapOutput) ToGatewayVcoRouteMapOutput() GatewayVcoRouteMapOutput

func (GatewayVcoRouteMapOutput) ToGatewayVcoRouteMapOutputWithContext added in v3.29.0 

func (o GatewayVcoRouteMapOutput) ToGatewayVcoRouteMapOutputWithContext(ctx context.Context) GatewayVcoRouteMapOutput

type GatewayVcoRouteOutput added in v3.29.0 

type GatewayVcoRouteOutput struct{ *pulumi.OutputState }

func (GatewayVcoRouteOutput) ElementType added in v3.29.0 

func (GatewayVcoRouteOutput) ElementType() reflect.Type

func (GatewayVcoRouteOutput) NextHop added in v3.29.0 

func (o GatewayVcoRouteOutput) NextHop() pulumi.StringOutput

The next hop of the destination route.

func (GatewayVcoRouteOutput) RouteDest added in v3.29.0 

func (o GatewayVcoRouteOutput) RouteDest() pulumi.StringOutput

The destination network segment of the destination route.

func (GatewayVcoRouteOutput) Status added in v3.29.0 

func (o GatewayVcoRouteOutput) Status() pulumi.StringOutput

The status of the vpn route entry.

func (GatewayVcoRouteOutput) ToGatewayVcoRouteOutput added in v3.29.0 

func (o GatewayVcoRouteOutput) ToGatewayVcoRouteOutput() GatewayVcoRouteOutput

func (GatewayVcoRouteOutput) ToGatewayVcoRouteOutputWithContext added in v3.29.0 

func (o GatewayVcoRouteOutput) ToGatewayVcoRouteOutputWithContext(ctx context.Context) GatewayVcoRouteOutput

func (GatewayVcoRouteOutput) VpnConnectionId added in v3.29.0 

func (o GatewayVcoRouteOutput) VpnConnectionId() pulumi.StringOutput

The id of the vpn attachment.

func (GatewayVcoRouteOutput) Weight added in v3.29.0 

func (o GatewayVcoRouteOutput) Weight() pulumi.IntOutput

The weight value of the destination route. Valid values: `0`, `100`.

type GatewayVcoRouteState added in v3.29.0 

type GatewayVcoRouteState struct {
	// The next hop of the destination route.
	NextHop pulumi.StringPtrInput
	// The destination network segment of the destination route.
	RouteDest pulumi.StringPtrInput
	// The status of the vpn route entry.
	Status pulumi.StringPtrInput
	// The id of the vpn attachment.
	VpnConnectionId pulumi.StringPtrInput
	// The weight value of the destination route. Valid values: `0`, `100`.
	Weight pulumi.IntPtrInput
}

func (GatewayVcoRouteState) ElementType added in v3.29.0 

func (GatewayVcoRouteState) ElementType() reflect.Type

type GatewayVpnAttachment added in v3.28.0 

type GatewayVpnAttachment struct {
	pulumi.CustomResourceState

	// Bgp configuration information. See `bgpConfig` below.
	BgpConfig GatewayVpnAttachmentBgpConfigOutput `pulumi:"bgpConfig"`
	// The ID of the customer gateway. From version 1.196.0, `customerGatewayId` can be modified.
	CustomerGatewayId pulumi.StringOutput `pulumi:"customerGatewayId"`
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrOutput `pulumi:"effectImmediately"`
	// Whether to enable the DPD (peer survival detection) function.
	EnableDpd pulumi.BoolOutput `pulumi:"enableDpd"`
	// Allow NAT penetration.
	EnableNatTraversal pulumi.BoolOutput `pulumi:"enableNatTraversal"`
	// Health check configuration information. See `healthCheckConfig` below.
	HealthCheckConfig GatewayVpnAttachmentHealthCheckConfigOutput `pulumi:"healthCheckConfig"`
	// Configuration negotiated in the second stage. See `ikeConfig` below.
	IkeConfig GatewayVpnAttachmentIkeConfigOutput `pulumi:"ikeConfig"`
	// The VPN gateway IP.
	InternetIp pulumi.StringOutput `pulumi:"internetIp"`
	// Configuration negotiated in the second stage. See `ipsecConfig` below.
	IpsecConfig GatewayVpnAttachmentIpsecConfigOutput `pulumi:"ipsecConfig"`
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet pulumi.StringOutput `pulumi:"localSubnet"`
	// The network type of the IPsec connection. Valid values: `public`, `private`.
	NetworkType pulumi.StringOutput `pulumi:"networkType"`
	// The CIDR block of the on-premises data center.
	RemoteSubnet pulumi.StringOutput `pulumi:"remoteSubnet"`
	// The status of the resource.
	Status pulumi.StringOutput `pulumi:"status"`
	// The name of the vpn attachment.
	VpnAttachmentName pulumi.StringPtrOutput `pulumi:"vpnAttachmentName"`
}

Provides a VPN Gateway Vpn Attachment resource.

For information about VPN Gateway Vpn Attachment and how to use it, see [What is Vpn Attachment](https://www.alibabacloud.com/help/zh/virtual-private-cloud/latest/createvpnattachment).

> **NOTE:** Available since v1.181.0.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		name := "tf-example"
		if param := cfg.Get("name"); param != "" {
			name = param
		}
		_, err := vpn.NewCustomerGateway(ctx, "default", &vpn.CustomerGatewayArgs{
			Name:        pulumi.String(name),
			IpAddress:   pulumi.String("42.104.22.210"),
			Asn:         pulumi.String("45014"),
			Description: pulumi.String(name),
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewGatewayVpnAttachment(ctx, "default", &vpn.GatewayVpnAttachmentArgs{
			CustomerGatewayId: _default.ID(),
			NetworkType:       pulumi.String("public"),
			LocalSubnet:       pulumi.String("0.0.0.0/0"),
			RemoteSubnet:      pulumi.String("0.0.0.0/0"),
			EffectImmediately: pulumi.Bool(false),
			IkeConfig: &vpn.GatewayVpnAttachmentIkeConfigArgs{
				IkeAuthAlg:  pulumi.String("md5"),
				IkeEncAlg:   pulumi.String("des"),
				IkeVersion:  pulumi.String("ikev2"),
				IkeMode:     pulumi.String("main"),
				IkeLifetime: pulumi.Int(86400),
				Psk:         pulumi.String("tf-testvpn2"),
				IkePfs:      pulumi.String("group1"),
				RemoteId:    pulumi.String("testbob2"),
				LocalId:     pulumi.String("testalice2"),
			},
			IpsecConfig: &vpn.GatewayVpnAttachmentIpsecConfigArgs{
				IpsecPfs:      pulumi.String("group5"),
				IpsecEncAlg:   pulumi.String("des"),
				IpsecAuthAlg:  pulumi.String("md5"),
				IpsecLifetime: pulumi.Int(86400),
			},
			BgpConfig: &vpn.GatewayVpnAttachmentBgpConfigArgs{
				Enable:     pulumi.Bool(true),
				LocalAsn:   pulumi.Int(45014),
				TunnelCidr: pulumi.String("169.254.11.0/30"),
				LocalBgpIp: pulumi.String("169.254.11.1"),
			},
			HealthCheckConfig: &vpn.GatewayVpnAttachmentHealthCheckConfigArgs{
				Enable:   pulumi.Bool(true),
				Sip:      pulumi.String("192.168.1.1"),
				Dip:      pulumi.String("10.0.0.1"),
				Interval: pulumi.Int(10),
				Retry:    pulumi.Int(10),
				Policy:   pulumi.String("revoke_route"),
			},
			EnableDpd:          pulumi.Bool(true),
			EnableNatTraversal: pulumi.Bool(true),
			VpnAttachmentName:  pulumi.String(name),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN Gateway Vpn Attachment can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/gatewayVpnAttachment:GatewayVpnAttachment example <id> ```

func GetGatewayVpnAttachment added in v3.28.0 

func GetGatewayVpnAttachment(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *GatewayVpnAttachmentState, opts ...pulumi.ResourceOption) (*GatewayVpnAttachment, error)

GetGatewayVpnAttachment gets an existing GatewayVpnAttachment resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewGatewayVpnAttachment added in v3.28.0 

func NewGatewayVpnAttachment(ctx *pulumi.Context,
	name string, args *GatewayVpnAttachmentArgs, opts ...pulumi.ResourceOption) (*GatewayVpnAttachment, error)

NewGatewayVpnAttachment registers a new resource with the given unique name, arguments, and options.

func (*GatewayVpnAttachment) ElementType added in v3.28.0 

func (*GatewayVpnAttachment) ElementType() reflect.Type

func (*GatewayVpnAttachment) ToGatewayVpnAttachmentOutput added in v3.28.0 

func (i *GatewayVpnAttachment) ToGatewayVpnAttachmentOutput() GatewayVpnAttachmentOutput

func (*GatewayVpnAttachment) ToGatewayVpnAttachmentOutputWithContext added in v3.28.0 

func (i *GatewayVpnAttachment) ToGatewayVpnAttachmentOutputWithContext(ctx context.Context) GatewayVpnAttachmentOutput

type GatewayVpnAttachmentArgs added in v3.28.0 

type GatewayVpnAttachmentArgs struct {
	// Bgp configuration information. See `bgpConfig` below.
	BgpConfig GatewayVpnAttachmentBgpConfigPtrInput
	// The ID of the customer gateway. From version 1.196.0, `customerGatewayId` can be modified.
	CustomerGatewayId pulumi.StringInput
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrInput
	// Whether to enable the DPD (peer survival detection) function.
	EnableDpd pulumi.BoolPtrInput
	// Allow NAT penetration.
	EnableNatTraversal pulumi.BoolPtrInput
	// Health check configuration information. See `healthCheckConfig` below.
	HealthCheckConfig GatewayVpnAttachmentHealthCheckConfigPtrInput
	// Configuration negotiated in the second stage. See `ikeConfig` below.
	IkeConfig GatewayVpnAttachmentIkeConfigPtrInput
	// Configuration negotiated in the second stage. See `ipsecConfig` below.
	IpsecConfig GatewayVpnAttachmentIpsecConfigPtrInput
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet pulumi.StringInput
	// The network type of the IPsec connection. Valid values: `public`, `private`.
	NetworkType pulumi.StringPtrInput
	// The CIDR block of the on-premises data center.
	RemoteSubnet pulumi.StringInput
	// The name of the vpn attachment.
	VpnAttachmentName pulumi.StringPtrInput
}

The set of arguments for constructing a GatewayVpnAttachment resource.

func (GatewayVpnAttachmentArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentArgs) ElementType() reflect.Type

type GatewayVpnAttachmentArray added in v3.28.0 

type GatewayVpnAttachmentArray []GatewayVpnAttachmentInput

func (GatewayVpnAttachmentArray) ElementType added in v3.28.0 

func (GatewayVpnAttachmentArray) ElementType() reflect.Type

func (GatewayVpnAttachmentArray) ToGatewayVpnAttachmentArrayOutput added in v3.28.0 

func (i GatewayVpnAttachmentArray) ToGatewayVpnAttachmentArrayOutput() GatewayVpnAttachmentArrayOutput

func (GatewayVpnAttachmentArray) ToGatewayVpnAttachmentArrayOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentArray) ToGatewayVpnAttachmentArrayOutputWithContext(ctx context.Context) GatewayVpnAttachmentArrayOutput

type GatewayVpnAttachmentArrayInput added in v3.28.0 

type GatewayVpnAttachmentArrayInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentArrayOutput() GatewayVpnAttachmentArrayOutput
	ToGatewayVpnAttachmentArrayOutputWithContext(context.Context) GatewayVpnAttachmentArrayOutput
}

GatewayVpnAttachmentArrayInput is an input type that accepts GatewayVpnAttachmentArray and GatewayVpnAttachmentArrayOutput values. You can construct a concrete instance of `GatewayVpnAttachmentArrayInput` via: 

GatewayVpnAttachmentArray{ GatewayVpnAttachmentArgs{...} }

type GatewayVpnAttachmentArrayOutput added in v3.28.0 

type GatewayVpnAttachmentArrayOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentArrayOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentArrayOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentArrayOutput) Index added in v3.28.0 

func (o GatewayVpnAttachmentArrayOutput) Index(i pulumi.IntInput) GatewayVpnAttachmentOutput

func (GatewayVpnAttachmentArrayOutput) ToGatewayVpnAttachmentArrayOutput added in v3.28.0 

func (o GatewayVpnAttachmentArrayOutput) ToGatewayVpnAttachmentArrayOutput() GatewayVpnAttachmentArrayOutput

func (GatewayVpnAttachmentArrayOutput) ToGatewayVpnAttachmentArrayOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentArrayOutput) ToGatewayVpnAttachmentArrayOutputWithContext(ctx context.Context) GatewayVpnAttachmentArrayOutput

type GatewayVpnAttachmentBgpConfig added in v3.28.0 

type GatewayVpnAttachmentBgpConfig struct {
	// Whether to enable BGP.
	Enable *bool `pulumi:"enable"`
	// The ASN on the Alibaba Cloud side.
	LocalAsn *int `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp *string `pulumi:"localBgpIp"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr *string `pulumi:"tunnelCidr"`
}

type GatewayVpnAttachmentBgpConfigArgs added in v3.28.0 

type GatewayVpnAttachmentBgpConfigArgs struct {
	// Whether to enable BGP.
	Enable pulumi.BoolPtrInput `pulumi:"enable"`
	// The ASN on the Alibaba Cloud side.
	LocalAsn pulumi.IntPtrInput `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp pulumi.StringPtrInput `pulumi:"localBgpIp"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr pulumi.StringPtrInput `pulumi:"tunnelCidr"`
}

func (GatewayVpnAttachmentBgpConfigArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentBgpConfigArgs) ElementType() reflect.Type

func (GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigOutput added in v3.28.0 

func (i GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigOutput() GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigPtrOutput added in v3.28.0 

func (i GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigPtrOutput() GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentBgpConfigArgs) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigPtrOutput

type GatewayVpnAttachmentBgpConfigInput added in v3.28.0 

type GatewayVpnAttachmentBgpConfigInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentBgpConfigOutput() GatewayVpnAttachmentBgpConfigOutput
	ToGatewayVpnAttachmentBgpConfigOutputWithContext(context.Context) GatewayVpnAttachmentBgpConfigOutput
}

GatewayVpnAttachmentBgpConfigInput is an input type that accepts GatewayVpnAttachmentBgpConfigArgs and GatewayVpnAttachmentBgpConfigOutput values. You can construct a concrete instance of `GatewayVpnAttachmentBgpConfigInput` via: 

GatewayVpnAttachmentBgpConfigArgs{...}

type GatewayVpnAttachmentBgpConfigOutput added in v3.28.0 

type GatewayVpnAttachmentBgpConfigOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentBgpConfigOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentBgpConfigOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentBgpConfigOutput) Enable added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) Enable() pulumi.BoolPtrOutput

Whether to enable BGP.

func (GatewayVpnAttachmentBgpConfigOutput) LocalAsn added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) LocalAsn() pulumi.IntPtrOutput

The ASN on the Alibaba Cloud side.

func (GatewayVpnAttachmentBgpConfigOutput) LocalBgpIp added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) LocalBgpIp() pulumi.StringPtrOutput

The BGP IP address on the Alibaba Cloud side.

func (GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigOutput added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigOutput() GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigPtrOutput() GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigOutput) TunnelCidr added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigOutput) TunnelCidr() pulumi.StringPtrOutput

The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.

type GatewayVpnAttachmentBgpConfigPtrInput added in v3.28.0 

type GatewayVpnAttachmentBgpConfigPtrInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentBgpConfigPtrOutput() GatewayVpnAttachmentBgpConfigPtrOutput
	ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext(context.Context) GatewayVpnAttachmentBgpConfigPtrOutput
}

GatewayVpnAttachmentBgpConfigPtrInput is an input type that accepts GatewayVpnAttachmentBgpConfigArgs, GatewayVpnAttachmentBgpConfigPtr and GatewayVpnAttachmentBgpConfigPtrOutput values. You can construct a concrete instance of `GatewayVpnAttachmentBgpConfigPtrInput` via: 

        GatewayVpnAttachmentBgpConfigArgs{...}

or:

        nil

func GatewayVpnAttachmentBgpConfigPtr added in v3.28.0 

func GatewayVpnAttachmentBgpConfigPtr(v *GatewayVpnAttachmentBgpConfigArgs) GatewayVpnAttachmentBgpConfigPtrInput

type GatewayVpnAttachmentBgpConfigPtrOutput added in v3.28.0 

type GatewayVpnAttachmentBgpConfigPtrOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentBgpConfigPtrOutput) Elem added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) Elem() GatewayVpnAttachmentBgpConfigOutput

func (GatewayVpnAttachmentBgpConfigPtrOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentBgpConfigPtrOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentBgpConfigPtrOutput) Enable added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) Enable() pulumi.BoolPtrOutput

Whether to enable BGP.

func (GatewayVpnAttachmentBgpConfigPtrOutput) LocalAsn added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) LocalAsn() pulumi.IntPtrOutput

The ASN on the Alibaba Cloud side.

func (GatewayVpnAttachmentBgpConfigPtrOutput) LocalBgpIp added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) LocalBgpIp() pulumi.StringPtrOutput

The BGP IP address on the Alibaba Cloud side.

func (GatewayVpnAttachmentBgpConfigPtrOutput) ToGatewayVpnAttachmentBgpConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) ToGatewayVpnAttachmentBgpConfigPtrOutput() GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigPtrOutput) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) ToGatewayVpnAttachmentBgpConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentBgpConfigPtrOutput

func (GatewayVpnAttachmentBgpConfigPtrOutput) TunnelCidr added in v3.28.0 

func (o GatewayVpnAttachmentBgpConfigPtrOutput) TunnelCidr() pulumi.StringPtrOutput

The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.

type GatewayVpnAttachmentHealthCheckConfig added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfig struct {
	// The destination IP address that is used for health checks.
	Dip *string `pulumi:"dip"`
	// Specifies whether to enable health checks.
	Enable *bool `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval *int `pulumi:"interval"`
	// Whether to revoke the published route when the health check fails. Valid values: `revokeRoute` or `reserveRoute`.
	Policy *string `pulumi:"policy"`
	// The maximum number of health check retries.
	Retry *int `pulumi:"retry"`
	// The source IP address that is used for health checks.
	Sip *string `pulumi:"sip"`
}

type GatewayVpnAttachmentHealthCheckConfigArgs added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigArgs struct {
	// The destination IP address that is used for health checks.
	Dip pulumi.StringPtrInput `pulumi:"dip"`
	// Specifies whether to enable health checks.
	Enable pulumi.BoolPtrInput `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// Whether to revoke the published route when the health check fails. Valid values: `revokeRoute` or `reserveRoute`.
	Policy pulumi.StringPtrInput `pulumi:"policy"`
	// The maximum number of health check retries.
	Retry pulumi.IntPtrInput `pulumi:"retry"`
	// The source IP address that is used for health checks.
	Sip pulumi.StringPtrInput `pulumi:"sip"`
}

func (GatewayVpnAttachmentHealthCheckConfigArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentHealthCheckConfigArgs) ElementType() reflect.Type

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigOutput added in v3.28.0 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigOutput() GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput added in v3.28.0 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput() GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentHealthCheckConfigArgs) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigPtrOutput

type GatewayVpnAttachmentHealthCheckConfigInput added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentHealthCheckConfigOutput() GatewayVpnAttachmentHealthCheckConfigOutput
	ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext(context.Context) GatewayVpnAttachmentHealthCheckConfigOutput
}

GatewayVpnAttachmentHealthCheckConfigInput is an input type that accepts GatewayVpnAttachmentHealthCheckConfigArgs and GatewayVpnAttachmentHealthCheckConfigOutput values. You can construct a concrete instance of `GatewayVpnAttachmentHealthCheckConfigInput` via: 

GatewayVpnAttachmentHealthCheckConfigArgs{...}

type GatewayVpnAttachmentHealthCheckConfigOutput added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentHealthCheckConfigOutput) Dip added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Dip() pulumi.StringPtrOutput

The destination IP address that is used for health checks.

func (GatewayVpnAttachmentHealthCheckConfigOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentHealthCheckConfigOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentHealthCheckConfigOutput) Enable added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Enable() pulumi.BoolPtrOutput

Specifies whether to enable health checks.

func (GatewayVpnAttachmentHealthCheckConfigOutput) Interval added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Interval() pulumi.IntPtrOutput

The interval between two consecutive health checks. Unit: seconds.

func (GatewayVpnAttachmentHealthCheckConfigOutput) Policy added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Policy() pulumi.StringPtrOutput

Whether to revoke the published route when the health check fails. Valid values: `revokeRoute` or `reserveRoute`.

func (GatewayVpnAttachmentHealthCheckConfigOutput) Retry added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Retry() pulumi.IntPtrOutput

The maximum number of health check retries.

func (GatewayVpnAttachmentHealthCheckConfigOutput) Sip added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) Sip() pulumi.StringPtrOutput

The source IP address that is used for health checks.

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigOutput added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigOutput() GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput() GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigPtrOutput

type GatewayVpnAttachmentHealthCheckConfigPtrInput added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigPtrInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentHealthCheckConfigPtrOutput() GatewayVpnAttachmentHealthCheckConfigPtrOutput
	ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext(context.Context) GatewayVpnAttachmentHealthCheckConfigPtrOutput
}

GatewayVpnAttachmentHealthCheckConfigPtrInput is an input type that accepts GatewayVpnAttachmentHealthCheckConfigArgs, GatewayVpnAttachmentHealthCheckConfigPtr and GatewayVpnAttachmentHealthCheckConfigPtrOutput values. You can construct a concrete instance of `GatewayVpnAttachmentHealthCheckConfigPtrInput` via: 

        GatewayVpnAttachmentHealthCheckConfigArgs{...}

or:

        nil

func GatewayVpnAttachmentHealthCheckConfigPtr added in v3.28.0 

func GatewayVpnAttachmentHealthCheckConfigPtr(v *GatewayVpnAttachmentHealthCheckConfigArgs) GatewayVpnAttachmentHealthCheckConfigPtrInput

type GatewayVpnAttachmentHealthCheckConfigPtrOutput added in v3.28.0 

type GatewayVpnAttachmentHealthCheckConfigPtrOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Dip added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Dip() pulumi.StringPtrOutput

The destination IP address that is used for health checks.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Elem added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Elem() GatewayVpnAttachmentHealthCheckConfigOutput

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Enable added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Enable() pulumi.BoolPtrOutput

Specifies whether to enable health checks.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Interval added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Interval() pulumi.IntPtrOutput

The interval between two consecutive health checks. Unit: seconds.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Policy added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Policy() pulumi.StringPtrOutput

Whether to revoke the published route when the health check fails. Valid values: `revokeRoute` or `reserveRoute`.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Retry added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Retry() pulumi.IntPtrOutput

The maximum number of health check retries.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) Sip added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) Sip() pulumi.StringPtrOutput

The source IP address that is used for health checks.

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutput() GatewayVpnAttachmentHealthCheckConfigPtrOutput

func (GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentHealthCheckConfigPtrOutput) ToGatewayVpnAttachmentHealthCheckConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentHealthCheckConfigPtrOutput

type GatewayVpnAttachmentIkeConfig added in v3.28.0 

type GatewayVpnAttachmentIkeConfig struct {
	// IKE authentication algorithm supports sha1 and MD5.
	IkeAuthAlg *string `pulumi:"ikeAuthAlg"`
	// The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes.
	IkeEncAlg *string `pulumi:"ikeEncAlg"`
	// The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.
	IkeLifetime *int `pulumi:"ikeLifetime"`
	// The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: `main`.
	IkeMode *string `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2
	IkePfs *string `pulumi:"ikePfs"`
	// The version of the IKE protocol. Valid value: `ikev1`, `ikev2`. Default value: `ikev1`.
	IkeVersion *string `pulumi:"ikeVersion"`
	// The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default.
	LocalId *string `pulumi:"localId"`
	// Used for authentication between the IPsec VPN gateway and the customer gateway.
	Psk *string `pulumi:"psk"`
	// The peer ID, which supports FQDN and IP formats. By default, the IP address of the currently selected user gateway.
	RemoteId *string `pulumi:"remoteId"`
}

type GatewayVpnAttachmentIkeConfigArgs added in v3.28.0 

type GatewayVpnAttachmentIkeConfigArgs struct {
	// IKE authentication algorithm supports sha1 and MD5.
	IkeAuthAlg pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	// The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes.
	IkeEncAlg pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	// The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.
	IkeLifetime pulumi.IntPtrInput `pulumi:"ikeLifetime"`
	// The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: `main`.
	IkeMode pulumi.StringPtrInput `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2
	IkePfs pulumi.StringPtrInput `pulumi:"ikePfs"`
	// The version of the IKE protocol. Valid value: `ikev1`, `ikev2`. Default value: `ikev1`.
	IkeVersion pulumi.StringPtrInput `pulumi:"ikeVersion"`
	// The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default.
	LocalId pulumi.StringPtrInput `pulumi:"localId"`
	// Used for authentication between the IPsec VPN gateway and the customer gateway.
	Psk pulumi.StringPtrInput `pulumi:"psk"`
	// The peer ID, which supports FQDN and IP formats. By default, the IP address of the currently selected user gateway.
	RemoteId pulumi.StringPtrInput `pulumi:"remoteId"`
}

func (GatewayVpnAttachmentIkeConfigArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIkeConfigArgs) ElementType() reflect.Type

func (GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigOutput added in v3.28.0 

func (i GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigOutput() GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigPtrOutput added in v3.28.0 

func (i GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigPtrOutput() GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentIkeConfigArgs) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigPtrOutput

type GatewayVpnAttachmentIkeConfigInput added in v3.28.0 

type GatewayVpnAttachmentIkeConfigInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentIkeConfigOutput() GatewayVpnAttachmentIkeConfigOutput
	ToGatewayVpnAttachmentIkeConfigOutputWithContext(context.Context) GatewayVpnAttachmentIkeConfigOutput
}

GatewayVpnAttachmentIkeConfigInput is an input type that accepts GatewayVpnAttachmentIkeConfigArgs and GatewayVpnAttachmentIkeConfigOutput values. You can construct a concrete instance of `GatewayVpnAttachmentIkeConfigInput` via: 

GatewayVpnAttachmentIkeConfigArgs{...}

type GatewayVpnAttachmentIkeConfigOutput added in v3.28.0 

type GatewayVpnAttachmentIkeConfigOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentIkeConfigOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIkeConfigOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentIkeConfigOutput) IkeAuthAlg added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

IKE authentication algorithm supports sha1 and MD5.

func (GatewayVpnAttachmentIkeConfigOutput) IkeEncAlg added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes.

func (GatewayVpnAttachmentIkeConfigOutput) IkeLifetime added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.

func (GatewayVpnAttachmentIkeConfigOutput) IkeMode added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: `main`.

func (GatewayVpnAttachmentIkeConfigOutput) IkePfs added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2

func (GatewayVpnAttachmentIkeConfigOutput) IkeVersion added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

The version of the IKE protocol. Valid value: `ikev1`, `ikev2`. Default value: `ikev1`.

func (GatewayVpnAttachmentIkeConfigOutput) LocalId added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) LocalId() pulumi.StringPtrOutput

The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default.

func (GatewayVpnAttachmentIkeConfigOutput) Psk added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) Psk() pulumi.StringPtrOutput

Used for authentication between the IPsec VPN gateway and the customer gateway.

func (GatewayVpnAttachmentIkeConfigOutput) RemoteId added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) RemoteId() pulumi.StringPtrOutput

The peer ID, which supports FQDN and IP formats. By default, the IP address of the currently selected user gateway.

func (GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigOutput added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigOutput() GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigPtrOutput() GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigOutput) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigPtrOutput

type GatewayVpnAttachmentIkeConfigPtrInput added in v3.28.0 

type GatewayVpnAttachmentIkeConfigPtrInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentIkeConfigPtrOutput() GatewayVpnAttachmentIkeConfigPtrOutput
	ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext(context.Context) GatewayVpnAttachmentIkeConfigPtrOutput
}

GatewayVpnAttachmentIkeConfigPtrInput is an input type that accepts GatewayVpnAttachmentIkeConfigArgs, GatewayVpnAttachmentIkeConfigPtr and GatewayVpnAttachmentIkeConfigPtrOutput values. You can construct a concrete instance of `GatewayVpnAttachmentIkeConfigPtrInput` via: 

        GatewayVpnAttachmentIkeConfigArgs{...}

or:

        nil

func GatewayVpnAttachmentIkeConfigPtr added in v3.28.0 

func GatewayVpnAttachmentIkeConfigPtr(v *GatewayVpnAttachmentIkeConfigArgs) GatewayVpnAttachmentIkeConfigPtrInput

type GatewayVpnAttachmentIkeConfigPtrOutput added in v3.28.0 

type GatewayVpnAttachmentIkeConfigPtrOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentIkeConfigPtrOutput) Elem added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) Elem() GatewayVpnAttachmentIkeConfigOutput

func (GatewayVpnAttachmentIkeConfigPtrOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIkeConfigPtrOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeAuthAlg added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeAuthAlg() pulumi.StringPtrOutput

IKE authentication algorithm supports sha1 and MD5.

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeEncAlg added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-one negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default Valid value: aes.

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeLifetime added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-one negotiation. The valid value of n is [0, 86400], the unit is second and the default value is 86400.

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeMode added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeMode() pulumi.StringPtrOutput

The negotiation mode of IKE V1. Valid value: main (main mode) | aggressive (aggressive mode). Default value: `main`.

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkePfs added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-one negotiation. Valid value: group1 | group2 | group5 | group14 | group24. Default value: group2

func (GatewayVpnAttachmentIkeConfigPtrOutput) IkeVersion added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) IkeVersion() pulumi.StringPtrOutput

The version of the IKE protocol. Valid value: `ikev1`, `ikev2`. Default value: `ikev1`.

func (GatewayVpnAttachmentIkeConfigPtrOutput) LocalId added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) LocalId() pulumi.StringPtrOutput

The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default.

func (GatewayVpnAttachmentIkeConfigPtrOutput) Psk added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) Psk() pulumi.StringPtrOutput

Used for authentication between the IPsec VPN gateway and the customer gateway.

func (GatewayVpnAttachmentIkeConfigPtrOutput) RemoteId added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) RemoteId() pulumi.StringPtrOutput

The peer ID, which supports FQDN and IP formats. By default, the IP address of the currently selected user gateway.

func (GatewayVpnAttachmentIkeConfigPtrOutput) ToGatewayVpnAttachmentIkeConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) ToGatewayVpnAttachmentIkeConfigPtrOutput() GatewayVpnAttachmentIkeConfigPtrOutput

func (GatewayVpnAttachmentIkeConfigPtrOutput) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIkeConfigPtrOutput) ToGatewayVpnAttachmentIkeConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIkeConfigPtrOutput

type GatewayVpnAttachmentInput added in v3.28.0 

type GatewayVpnAttachmentInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentOutput() GatewayVpnAttachmentOutput
	ToGatewayVpnAttachmentOutputWithContext(ctx context.Context) GatewayVpnAttachmentOutput
}

type GatewayVpnAttachmentIpsecConfig added in v3.28.0 

type GatewayVpnAttachmentIpsecConfig struct {
	// The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1
	IpsecAuthAlg *string `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes
	IpsecEncAlg *string `pulumi:"ipsecEncAlg"`
	// The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.
	IpsecLifetime *int `pulumi:"ipsecLifetime"`
	// The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2
	IpsecPfs *string `pulumi:"ipsecPfs"`
}

type GatewayVpnAttachmentIpsecConfigArgs added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigArgs struct {
	// The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1
	IpsecAuthAlg pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes
	IpsecEncAlg pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	// The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.
	IpsecLifetime pulumi.IntPtrInput `pulumi:"ipsecLifetime"`
	// The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2
	IpsecPfs pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (GatewayVpnAttachmentIpsecConfigArgs) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIpsecConfigArgs) ElementType() reflect.Type

func (GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigOutput added in v3.28.0 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigOutput() GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigPtrOutput added in v3.28.0 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigPtrOutput() GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentIpsecConfigArgs) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigPtrOutput

type GatewayVpnAttachmentIpsecConfigInput added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentIpsecConfigOutput() GatewayVpnAttachmentIpsecConfigOutput
	ToGatewayVpnAttachmentIpsecConfigOutputWithContext(context.Context) GatewayVpnAttachmentIpsecConfigOutput
}

GatewayVpnAttachmentIpsecConfigInput is an input type that accepts GatewayVpnAttachmentIpsecConfigArgs and GatewayVpnAttachmentIpsecConfigOutput values. You can construct a concrete instance of `GatewayVpnAttachmentIpsecConfigInput` via: 

GatewayVpnAttachmentIpsecConfigArgs{...}

type GatewayVpnAttachmentIpsecConfigOutput added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentIpsecConfigOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIpsecConfigOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentIpsecConfigOutput) IpsecAuthAlg added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1

func (GatewayVpnAttachmentIpsecConfigOutput) IpsecEncAlg added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes

func (GatewayVpnAttachmentIpsecConfigOutput) IpsecLifetime added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.

func (GatewayVpnAttachmentIpsecConfigOutput) IpsecPfs added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2

func (GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigOutput added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigOutput() GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutput() GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigPtrOutput

type GatewayVpnAttachmentIpsecConfigPtrInput added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigPtrInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentIpsecConfigPtrOutput() GatewayVpnAttachmentIpsecConfigPtrOutput
	ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext(context.Context) GatewayVpnAttachmentIpsecConfigPtrOutput
}

GatewayVpnAttachmentIpsecConfigPtrInput is an input type that accepts GatewayVpnAttachmentIpsecConfigArgs, GatewayVpnAttachmentIpsecConfigPtr and GatewayVpnAttachmentIpsecConfigPtrOutput values. You can construct a concrete instance of `GatewayVpnAttachmentIpsecConfigPtrInput` via: 

        GatewayVpnAttachmentIpsecConfigArgs{...}

or:

        nil

func GatewayVpnAttachmentIpsecConfigPtr added in v3.28.0 

func GatewayVpnAttachmentIpsecConfigPtr(v *GatewayVpnAttachmentIpsecConfigArgs) GatewayVpnAttachmentIpsecConfigPtrInput

type GatewayVpnAttachmentIpsecConfigPtrOutput added in v3.28.0 

type GatewayVpnAttachmentIpsecConfigPtrOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentIpsecConfigPtrOutput) Elem added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) Elem() GatewayVpnAttachmentIpsecConfigOutput

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecAuthAlg added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm of phase-two negotiation. Valid value: md5 | sha1 | sha256 | sha384 | sha512 |. Default value: sha1

func (GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecEncAlg added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm of phase-two negotiation. Valid value: aes | aes192 | aes256 | des | 3des. Default value: aes

func (GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecLifetime added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifecycle as the result of phase-two negotiation. The valid value is [0, 86400], the unit is second and the default value is 86400.

func (GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecPfs added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) IpsecPfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm used by phase-two negotiation. Valid value: group1 | group2 | group5 | group14 | group24| disabled. Default value: group2

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutput added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutput() GatewayVpnAttachmentIpsecConfigPtrOutput

func (GatewayVpnAttachmentIpsecConfigPtrOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentIpsecConfigPtrOutput) ToGatewayVpnAttachmentIpsecConfigPtrOutputWithContext(ctx context.Context) GatewayVpnAttachmentIpsecConfigPtrOutput

type GatewayVpnAttachmentMap added in v3.28.0 

type GatewayVpnAttachmentMap map[string]GatewayVpnAttachmentInput

func (GatewayVpnAttachmentMap) ElementType added in v3.28.0 

func (GatewayVpnAttachmentMap) ElementType() reflect.Type

func (GatewayVpnAttachmentMap) ToGatewayVpnAttachmentMapOutput added in v3.28.0 

func (i GatewayVpnAttachmentMap) ToGatewayVpnAttachmentMapOutput() GatewayVpnAttachmentMapOutput

func (GatewayVpnAttachmentMap) ToGatewayVpnAttachmentMapOutputWithContext added in v3.28.0 

func (i GatewayVpnAttachmentMap) ToGatewayVpnAttachmentMapOutputWithContext(ctx context.Context) GatewayVpnAttachmentMapOutput

type GatewayVpnAttachmentMapInput added in v3.28.0 

type GatewayVpnAttachmentMapInput interface {
	pulumi.Input

	ToGatewayVpnAttachmentMapOutput() GatewayVpnAttachmentMapOutput
	ToGatewayVpnAttachmentMapOutputWithContext(context.Context) GatewayVpnAttachmentMapOutput
}

GatewayVpnAttachmentMapInput is an input type that accepts GatewayVpnAttachmentMap and GatewayVpnAttachmentMapOutput values. You can construct a concrete instance of `GatewayVpnAttachmentMapInput` via: 

GatewayVpnAttachmentMap{ "key": GatewayVpnAttachmentArgs{...} }

type GatewayVpnAttachmentMapOutput added in v3.28.0 

type GatewayVpnAttachmentMapOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentMapOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentMapOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentMapOutput) MapIndex added in v3.28.0 

func (o GatewayVpnAttachmentMapOutput) MapIndex(k pulumi.StringInput) GatewayVpnAttachmentOutput

func (GatewayVpnAttachmentMapOutput) ToGatewayVpnAttachmentMapOutput added in v3.28.0 

func (o GatewayVpnAttachmentMapOutput) ToGatewayVpnAttachmentMapOutput() GatewayVpnAttachmentMapOutput

func (GatewayVpnAttachmentMapOutput) ToGatewayVpnAttachmentMapOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentMapOutput) ToGatewayVpnAttachmentMapOutputWithContext(ctx context.Context) GatewayVpnAttachmentMapOutput

type GatewayVpnAttachmentOutput added in v3.28.0 

type GatewayVpnAttachmentOutput struct{ *pulumi.OutputState }

func (GatewayVpnAttachmentOutput) BgpConfig added in v3.28.0 

func (o GatewayVpnAttachmentOutput) BgpConfig() GatewayVpnAttachmentBgpConfigOutput

Bgp configuration information. See `bgpConfig` below.

func (GatewayVpnAttachmentOutput) CustomerGatewayId added in v3.28.0 

func (o GatewayVpnAttachmentOutput) CustomerGatewayId() pulumi.StringOutput

The ID of the customer gateway. From version 1.196.0, `customerGatewayId` can be modified.

func (GatewayVpnAttachmentOutput) EffectImmediately added in v3.28.0 

func (o GatewayVpnAttachmentOutput) EffectImmediately() pulumi.BoolPtrOutput

Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.

func (GatewayVpnAttachmentOutput) ElementType added in v3.28.0 

func (GatewayVpnAttachmentOutput) ElementType() reflect.Type

func (GatewayVpnAttachmentOutput) EnableDpd added in v3.28.0 

func (o GatewayVpnAttachmentOutput) EnableDpd() pulumi.BoolOutput

Whether to enable the DPD (peer survival detection) function.

func (GatewayVpnAttachmentOutput) EnableNatTraversal added in v3.28.0 

func (o GatewayVpnAttachmentOutput) EnableNatTraversal() pulumi.BoolOutput

Allow NAT penetration.

func (GatewayVpnAttachmentOutput) HealthCheckConfig added in v3.28.0 

func (o GatewayVpnAttachmentOutput) HealthCheckConfig() GatewayVpnAttachmentHealthCheckConfigOutput

Health check configuration information. See `healthCheckConfig` below.

func (GatewayVpnAttachmentOutput) IkeConfig added in v3.28.0 

func (o GatewayVpnAttachmentOutput) IkeConfig() GatewayVpnAttachmentIkeConfigOutput

Configuration negotiated in the second stage. See `ikeConfig` below.

func (GatewayVpnAttachmentOutput) InternetIp added in v3.29.0 

func (o GatewayVpnAttachmentOutput) InternetIp() pulumi.StringOutput

The VPN gateway IP.

func (GatewayVpnAttachmentOutput) IpsecConfig added in v3.28.0 

func (o GatewayVpnAttachmentOutput) IpsecConfig() GatewayVpnAttachmentIpsecConfigOutput

Configuration negotiated in the second stage. See `ipsecConfig` below.

func (GatewayVpnAttachmentOutput) LocalSubnet added in v3.28.0 

func (o GatewayVpnAttachmentOutput) LocalSubnet() pulumi.StringOutput

The CIDR block of the virtual private cloud (VPC).

func (GatewayVpnAttachmentOutput) NetworkType added in v3.28.0 

func (o GatewayVpnAttachmentOutput) NetworkType() pulumi.StringOutput

The network type of the IPsec connection. Valid values: `public`, `private`.

func (GatewayVpnAttachmentOutput) RemoteSubnet added in v3.28.0 

func (o GatewayVpnAttachmentOutput) RemoteSubnet() pulumi.StringOutput

The CIDR block of the on-premises data center.

func (GatewayVpnAttachmentOutput) Status added in v3.28.0 

func (o GatewayVpnAttachmentOutput) Status() pulumi.StringOutput

The status of the resource.

func (GatewayVpnAttachmentOutput) ToGatewayVpnAttachmentOutput added in v3.28.0 

func (o GatewayVpnAttachmentOutput) ToGatewayVpnAttachmentOutput() GatewayVpnAttachmentOutput

func (GatewayVpnAttachmentOutput) ToGatewayVpnAttachmentOutputWithContext added in v3.28.0 

func (o GatewayVpnAttachmentOutput) ToGatewayVpnAttachmentOutputWithContext(ctx context.Context) GatewayVpnAttachmentOutput

func (GatewayVpnAttachmentOutput) VpnAttachmentName added in v3.28.0 

func (o GatewayVpnAttachmentOutput) VpnAttachmentName() pulumi.StringPtrOutput

The name of the vpn attachment.

type GatewayVpnAttachmentState added in v3.28.0 

type GatewayVpnAttachmentState struct {
	// Bgp configuration information. See `bgpConfig` below.
	BgpConfig GatewayVpnAttachmentBgpConfigPtrInput
	// The ID of the customer gateway. From version 1.196.0, `customerGatewayId` can be modified.
	CustomerGatewayId pulumi.StringPtrInput
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolPtrInput
	// Whether to enable the DPD (peer survival detection) function.
	EnableDpd pulumi.BoolPtrInput
	// Allow NAT penetration.
	EnableNatTraversal pulumi.BoolPtrInput
	// Health check configuration information. See `healthCheckConfig` below.
	HealthCheckConfig GatewayVpnAttachmentHealthCheckConfigPtrInput
	// Configuration negotiated in the second stage. See `ikeConfig` below.
	IkeConfig GatewayVpnAttachmentIkeConfigPtrInput
	// The VPN gateway IP.
	InternetIp pulumi.StringPtrInput
	// Configuration negotiated in the second stage. See `ipsecConfig` below.
	IpsecConfig GatewayVpnAttachmentIpsecConfigPtrInput
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet pulumi.StringPtrInput
	// The network type of the IPsec connection. Valid values: `public`, `private`.
	NetworkType pulumi.StringPtrInput
	// The CIDR block of the on-premises data center.
	RemoteSubnet pulumi.StringPtrInput
	// The status of the resource.
	Status pulumi.StringPtrInput
	// The name of the vpn attachment.
	VpnAttachmentName pulumi.StringPtrInput
}

func (GatewayVpnAttachmentState) ElementType added in v3.28.0 

func (GatewayVpnAttachmentState) ElementType() reflect.Type

type GetConnectionsArgs 

type GetConnectionsArgs struct {
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId *string `pulumi:"customerGatewayId"`
	// IDs of the VPN connections.
	Ids []string `pulumi:"ids"`
	// A regex string of VPN connection name.
	NameRegex *string `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile *string `pulumi:"outputFile"`
	// Use the VPN gateway ID as the search key.
	VpnGatewayId *string `pulumi:"vpnGatewayId"`
}

A collection of arguments for invoking getConnections.

type GetConnectionsConnection 

type GetConnectionsConnection struct {
	CreateTime string `pulumi:"createTime"`
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId string `pulumi:"customerGatewayId"`
	EffectImmediately bool   `pulumi:"effectImmediately"`
	// Wether enable Dpd detection.
	EnableDpd bool `pulumi:"enableDpd"`
	// enable nat traversal.
	EnableNatTraversal bool `pulumi:"enableNatTraversal"`
	// Enable tunnel bgp.
	EnableTunnelsBgp bool `pulumi:"enableTunnelsBgp"`
	// ID of the VPN connection.
	Id string `pulumi:"id"`
	// The ikeConfig mapping supports the following:
	IkeConfigs []GetConnectionsConnectionIkeConfig `pulumi:"ikeConfigs"`
	// The ipsecConfig mapping supports the following:
	IpsecConfigs []GetConnectionsConnectionIpsecConfig `pulumi:"ipsecConfigs"`
	// The local subnet of the VPN connection.
	LocalSubnet string `pulumi:"localSubnet"`
	// The name of the VPN connection.
	Name string `pulumi:"name"`
	// The remote subnet of the VPN connection.
	RemoteSubnet string `pulumi:"remoteSubnet"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status string `pulumi:"status"`
	// The tunnelOptionsSpecification supports the following:
	TunnelOptionsSpecifications []GetConnectionsConnectionTunnelOptionsSpecification `pulumi:"tunnelOptionsSpecifications"`
	VcoHealthChecks             []GetConnectionsConnectionVcoHealthCheck             `pulumi:"vcoHealthChecks"`
	// The vpnBgpConfig mapping supports the following:
	VpnBgpConfigs []GetConnectionsConnectionVpnBgpConfig `pulumi:"vpnBgpConfigs"`
	// Use the VPN gateway ID as the search key.
	VpnGatewayId string `pulumi:"vpnGatewayId"`
}

type GetConnectionsConnectionArgs 

type GetConnectionsConnectionArgs struct {
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId pulumi.StringInput `pulumi:"customerGatewayId"`
	EffectImmediately pulumi.BoolInput   `pulumi:"effectImmediately"`
	// Wether enable Dpd detection.
	EnableDpd pulumi.BoolInput `pulumi:"enableDpd"`
	// enable nat traversal.
	EnableNatTraversal pulumi.BoolInput `pulumi:"enableNatTraversal"`
	// Enable tunnel bgp.
	EnableTunnelsBgp pulumi.BoolInput `pulumi:"enableTunnelsBgp"`
	// ID of the VPN connection.
	Id pulumi.StringInput `pulumi:"id"`
	// The ikeConfig mapping supports the following:
	IkeConfigs GetConnectionsConnectionIkeConfigArrayInput `pulumi:"ikeConfigs"`
	// The ipsecConfig mapping supports the following:
	IpsecConfigs GetConnectionsConnectionIpsecConfigArrayInput `pulumi:"ipsecConfigs"`
	// The local subnet of the VPN connection.
	LocalSubnet pulumi.StringInput `pulumi:"localSubnet"`
	// The name of the VPN connection.
	Name pulumi.StringInput `pulumi:"name"`
	// The remote subnet of the VPN connection.
	RemoteSubnet pulumi.StringInput `pulumi:"remoteSubnet"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status pulumi.StringInput `pulumi:"status"`
	// The tunnelOptionsSpecification supports the following:
	TunnelOptionsSpecifications GetConnectionsConnectionTunnelOptionsSpecificationArrayInput `pulumi:"tunnelOptionsSpecifications"`
	VcoHealthChecks             GetConnectionsConnectionVcoHealthCheckArrayInput             `pulumi:"vcoHealthChecks"`
	// The vpnBgpConfig mapping supports the following:
	VpnBgpConfigs GetConnectionsConnectionVpnBgpConfigArrayInput `pulumi:"vpnBgpConfigs"`
	// Use the VPN gateway ID as the search key.
	VpnGatewayId pulumi.StringInput `pulumi:"vpnGatewayId"`
}

func (GetConnectionsConnectionArgs) ElementType 

func (GetConnectionsConnectionArgs) ElementType() reflect.Type

func (GetConnectionsConnectionArgs) ToGetConnectionsConnectionOutput 

func (i GetConnectionsConnectionArgs) ToGetConnectionsConnectionOutput() GetConnectionsConnectionOutput

func (GetConnectionsConnectionArgs) ToGetConnectionsConnectionOutputWithContext 

func (i GetConnectionsConnectionArgs) ToGetConnectionsConnectionOutputWithContext(ctx context.Context) GetConnectionsConnectionOutput

type GetConnectionsConnectionArray 

type GetConnectionsConnectionArray []GetConnectionsConnectionInput

func (GetConnectionsConnectionArray) ElementType 

func (GetConnectionsConnectionArray) ElementType() reflect.Type

func (GetConnectionsConnectionArray) ToGetConnectionsConnectionArrayOutput 

func (i GetConnectionsConnectionArray) ToGetConnectionsConnectionArrayOutput() GetConnectionsConnectionArrayOutput

func (GetConnectionsConnectionArray) ToGetConnectionsConnectionArrayOutputWithContext 

func (i GetConnectionsConnectionArray) ToGetConnectionsConnectionArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionArrayOutput

type GetConnectionsConnectionArrayInput 

type GetConnectionsConnectionArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionArrayOutput() GetConnectionsConnectionArrayOutput
	ToGetConnectionsConnectionArrayOutputWithContext(context.Context) GetConnectionsConnectionArrayOutput
}

GetConnectionsConnectionArrayInput is an input type that accepts GetConnectionsConnectionArray and GetConnectionsConnectionArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionArrayInput` via: 

GetConnectionsConnectionArray{ GetConnectionsConnectionArgs{...} }

type GetConnectionsConnectionArrayOutput 

type GetConnectionsConnectionArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionArrayOutput) ElementType 

func (GetConnectionsConnectionArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionArrayOutput) Index 

func (o GetConnectionsConnectionArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionOutput

func (GetConnectionsConnectionArrayOutput) ToGetConnectionsConnectionArrayOutput 

func (o GetConnectionsConnectionArrayOutput) ToGetConnectionsConnectionArrayOutput() GetConnectionsConnectionArrayOutput

func (GetConnectionsConnectionArrayOutput) ToGetConnectionsConnectionArrayOutputWithContext 

func (o GetConnectionsConnectionArrayOutput) ToGetConnectionsConnectionArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionArrayOutput

type GetConnectionsConnectionIkeConfig 

type GetConnectionsConnectionIkeConfig struct {
	// IKE auth Algorithm.
	IkeAuthAlg *string `pulumi:"ikeAuthAlg"`
	// IKE encript algorithm.
	IkeEncAlg *string `pulumi:"ikeEncAlg"`
	// IKE lifetime.
	IkeLifetime *int `pulumi:"ikeLifetime"`
	// The identification of the VPN gateway.
	IkeLocalId *string `pulumi:"ikeLocalId"`
	// IKE Mode.
	IkeMode *string `pulumi:"ikeMode"`
	// DH Group.
	IkePfs *string `pulumi:"ikePfs"`
	// The identification of the customer gateway.
	IkeRemoteId *string `pulumi:"ikeRemoteId"`
	// IKE Version.
	IkeVersion *string `pulumi:"ikeVersion"`
	// Preshared secret key.
	Psk *string `pulumi:"psk"`
}

type GetConnectionsConnectionIkeConfigArgs 

type GetConnectionsConnectionIkeConfigArgs struct {
	// IKE auth Algorithm.
	IkeAuthAlg pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	// IKE encript algorithm.
	IkeEncAlg pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	// IKE lifetime.
	IkeLifetime pulumi.IntPtrInput `pulumi:"ikeLifetime"`
	// The identification of the VPN gateway.
	IkeLocalId pulumi.StringPtrInput `pulumi:"ikeLocalId"`
	// IKE Mode.
	IkeMode pulumi.StringPtrInput `pulumi:"ikeMode"`
	// DH Group.
	IkePfs pulumi.StringPtrInput `pulumi:"ikePfs"`
	// The identification of the customer gateway.
	IkeRemoteId pulumi.StringPtrInput `pulumi:"ikeRemoteId"`
	// IKE Version.
	IkeVersion pulumi.StringPtrInput `pulumi:"ikeVersion"`
	// Preshared secret key.
	Psk pulumi.StringPtrInput `pulumi:"psk"`
}

func (GetConnectionsConnectionIkeConfigArgs) ElementType 

func (GetConnectionsConnectionIkeConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionIkeConfigArgs) ToGetConnectionsConnectionIkeConfigOutput 

func (i GetConnectionsConnectionIkeConfigArgs) ToGetConnectionsConnectionIkeConfigOutput() GetConnectionsConnectionIkeConfigOutput

func (GetConnectionsConnectionIkeConfigArgs) ToGetConnectionsConnectionIkeConfigOutputWithContext 

func (i GetConnectionsConnectionIkeConfigArgs) ToGetConnectionsConnectionIkeConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionIkeConfigOutput

type GetConnectionsConnectionIkeConfigArray 

type GetConnectionsConnectionIkeConfigArray []GetConnectionsConnectionIkeConfigInput

func (GetConnectionsConnectionIkeConfigArray) ElementType 

func (GetConnectionsConnectionIkeConfigArray) ElementType() reflect.Type

func (GetConnectionsConnectionIkeConfigArray) ToGetConnectionsConnectionIkeConfigArrayOutput 

func (i GetConnectionsConnectionIkeConfigArray) ToGetConnectionsConnectionIkeConfigArrayOutput() GetConnectionsConnectionIkeConfigArrayOutput

func (GetConnectionsConnectionIkeConfigArray) ToGetConnectionsConnectionIkeConfigArrayOutputWithContext 

func (i GetConnectionsConnectionIkeConfigArray) ToGetConnectionsConnectionIkeConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionIkeConfigArrayOutput

type GetConnectionsConnectionIkeConfigArrayInput 

type GetConnectionsConnectionIkeConfigArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionIkeConfigArrayOutput() GetConnectionsConnectionIkeConfigArrayOutput
	ToGetConnectionsConnectionIkeConfigArrayOutputWithContext(context.Context) GetConnectionsConnectionIkeConfigArrayOutput
}

GetConnectionsConnectionIkeConfigArrayInput is an input type that accepts GetConnectionsConnectionIkeConfigArray and GetConnectionsConnectionIkeConfigArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionIkeConfigArrayInput` via: 

GetConnectionsConnectionIkeConfigArray{ GetConnectionsConnectionIkeConfigArgs{...} }

type GetConnectionsConnectionIkeConfigArrayOutput 

type GetConnectionsConnectionIkeConfigArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionIkeConfigArrayOutput) ElementType 

func (GetConnectionsConnectionIkeConfigArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionIkeConfigArrayOutput) Index 

func (o GetConnectionsConnectionIkeConfigArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionIkeConfigOutput

func (GetConnectionsConnectionIkeConfigArrayOutput) ToGetConnectionsConnectionIkeConfigArrayOutput 

func (o GetConnectionsConnectionIkeConfigArrayOutput) ToGetConnectionsConnectionIkeConfigArrayOutput() GetConnectionsConnectionIkeConfigArrayOutput

func (GetConnectionsConnectionIkeConfigArrayOutput) ToGetConnectionsConnectionIkeConfigArrayOutputWithContext 

func (o GetConnectionsConnectionIkeConfigArrayOutput) ToGetConnectionsConnectionIkeConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionIkeConfigArrayOutput

type GetConnectionsConnectionIkeConfigInput 

type GetConnectionsConnectionIkeConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionIkeConfigOutput() GetConnectionsConnectionIkeConfigOutput
	ToGetConnectionsConnectionIkeConfigOutputWithContext(context.Context) GetConnectionsConnectionIkeConfigOutput
}

GetConnectionsConnectionIkeConfigInput is an input type that accepts GetConnectionsConnectionIkeConfigArgs and GetConnectionsConnectionIkeConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionIkeConfigInput` via: 

GetConnectionsConnectionIkeConfigArgs{...}

type GetConnectionsConnectionIkeConfigOutput 

type GetConnectionsConnectionIkeConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionIkeConfigOutput) ElementType 

func (GetConnectionsConnectionIkeConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionIkeConfigOutput) IkeAuthAlg 

func (o GetConnectionsConnectionIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

IKE auth Algorithm.

func (GetConnectionsConnectionIkeConfigOutput) IkeEncAlg 

func (o GetConnectionsConnectionIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

IKE encript algorithm.

func (GetConnectionsConnectionIkeConfigOutput) IkeLifetime 

func (o GetConnectionsConnectionIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

IKE lifetime.

func (GetConnectionsConnectionIkeConfigOutput) IkeLocalId 

func (o GetConnectionsConnectionIkeConfigOutput) IkeLocalId() pulumi.StringPtrOutput

The identification of the VPN gateway.

func (GetConnectionsConnectionIkeConfigOutput) IkeMode 

func (o GetConnectionsConnectionIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

IKE Mode.

func (GetConnectionsConnectionIkeConfigOutput) IkePfs 

func (o GetConnectionsConnectionIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

DH Group.

func (GetConnectionsConnectionIkeConfigOutput) IkeRemoteId 

func (o GetConnectionsConnectionIkeConfigOutput) IkeRemoteId() pulumi.StringPtrOutput

The identification of the customer gateway.

func (GetConnectionsConnectionIkeConfigOutput) IkeVersion 

func (o GetConnectionsConnectionIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

IKE Version.

func (GetConnectionsConnectionIkeConfigOutput) Psk 

func (o GetConnectionsConnectionIkeConfigOutput) Psk() pulumi.StringPtrOutput

Preshared secret key.

func (GetConnectionsConnectionIkeConfigOutput) ToGetConnectionsConnectionIkeConfigOutput 

func (o GetConnectionsConnectionIkeConfigOutput) ToGetConnectionsConnectionIkeConfigOutput() GetConnectionsConnectionIkeConfigOutput

func (GetConnectionsConnectionIkeConfigOutput) ToGetConnectionsConnectionIkeConfigOutputWithContext 

func (o GetConnectionsConnectionIkeConfigOutput) ToGetConnectionsConnectionIkeConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionIkeConfigOutput

type GetConnectionsConnectionInput 

type GetConnectionsConnectionInput interface {
	pulumi.Input

	ToGetConnectionsConnectionOutput() GetConnectionsConnectionOutput
	ToGetConnectionsConnectionOutputWithContext(context.Context) GetConnectionsConnectionOutput
}

GetConnectionsConnectionInput is an input type that accepts GetConnectionsConnectionArgs and GetConnectionsConnectionOutput values. You can construct a concrete instance of `GetConnectionsConnectionInput` via: 

GetConnectionsConnectionArgs{...}

type GetConnectionsConnectionIpsecConfig 

type GetConnectionsConnectionIpsecConfig struct {
	// IPsec Auth algorithm.
	IpsecAuthAlg *string `pulumi:"ipsecAuthAlg"`
	// IPsec Encript algorithm.
	IpsecEncAlg *string `pulumi:"ipsecEncAlg"`
	// IPsec lifetime.
	IpsecLifetime *int `pulumi:"ipsecLifetime"`
	// DH Group.
	IpsecPfs *string `pulumi:"ipsecPfs"`
}

type GetConnectionsConnectionIpsecConfigArgs 

type GetConnectionsConnectionIpsecConfigArgs struct {
	// IPsec Auth algorithm.
	IpsecAuthAlg pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	// IPsec Encript algorithm.
	IpsecEncAlg pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	// IPsec lifetime.
	IpsecLifetime pulumi.IntPtrInput `pulumi:"ipsecLifetime"`
	// DH Group.
	IpsecPfs pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (GetConnectionsConnectionIpsecConfigArgs) ElementType 

func (GetConnectionsConnectionIpsecConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionIpsecConfigArgs) ToGetConnectionsConnectionIpsecConfigOutput 

func (i GetConnectionsConnectionIpsecConfigArgs) ToGetConnectionsConnectionIpsecConfigOutput() GetConnectionsConnectionIpsecConfigOutput

func (GetConnectionsConnectionIpsecConfigArgs) ToGetConnectionsConnectionIpsecConfigOutputWithContext 

func (i GetConnectionsConnectionIpsecConfigArgs) ToGetConnectionsConnectionIpsecConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionIpsecConfigOutput

type GetConnectionsConnectionIpsecConfigArray 

type GetConnectionsConnectionIpsecConfigArray []GetConnectionsConnectionIpsecConfigInput

func (GetConnectionsConnectionIpsecConfigArray) ElementType 

func (GetConnectionsConnectionIpsecConfigArray) ElementType() reflect.Type

func (GetConnectionsConnectionIpsecConfigArray) ToGetConnectionsConnectionIpsecConfigArrayOutput 

func (i GetConnectionsConnectionIpsecConfigArray) ToGetConnectionsConnectionIpsecConfigArrayOutput() GetConnectionsConnectionIpsecConfigArrayOutput

func (GetConnectionsConnectionIpsecConfigArray) ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext 

func (i GetConnectionsConnectionIpsecConfigArray) ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionIpsecConfigArrayOutput

type GetConnectionsConnectionIpsecConfigArrayInput 

type GetConnectionsConnectionIpsecConfigArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionIpsecConfigArrayOutput() GetConnectionsConnectionIpsecConfigArrayOutput
	ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext(context.Context) GetConnectionsConnectionIpsecConfigArrayOutput
}

GetConnectionsConnectionIpsecConfigArrayInput is an input type that accepts GetConnectionsConnectionIpsecConfigArray and GetConnectionsConnectionIpsecConfigArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionIpsecConfigArrayInput` via: 

GetConnectionsConnectionIpsecConfigArray{ GetConnectionsConnectionIpsecConfigArgs{...} }

type GetConnectionsConnectionIpsecConfigArrayOutput 

type GetConnectionsConnectionIpsecConfigArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionIpsecConfigArrayOutput) ElementType 

func (GetConnectionsConnectionIpsecConfigArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionIpsecConfigArrayOutput) Index 

func (o GetConnectionsConnectionIpsecConfigArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionIpsecConfigOutput

func (GetConnectionsConnectionIpsecConfigArrayOutput) ToGetConnectionsConnectionIpsecConfigArrayOutput 

func (o GetConnectionsConnectionIpsecConfigArrayOutput) ToGetConnectionsConnectionIpsecConfigArrayOutput() GetConnectionsConnectionIpsecConfigArrayOutput

func (GetConnectionsConnectionIpsecConfigArrayOutput) ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext 

func (o GetConnectionsConnectionIpsecConfigArrayOutput) ToGetConnectionsConnectionIpsecConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionIpsecConfigArrayOutput

type GetConnectionsConnectionIpsecConfigInput 

type GetConnectionsConnectionIpsecConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionIpsecConfigOutput() GetConnectionsConnectionIpsecConfigOutput
	ToGetConnectionsConnectionIpsecConfigOutputWithContext(context.Context) GetConnectionsConnectionIpsecConfigOutput
}

GetConnectionsConnectionIpsecConfigInput is an input type that accepts GetConnectionsConnectionIpsecConfigArgs and GetConnectionsConnectionIpsecConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionIpsecConfigInput` via: 

GetConnectionsConnectionIpsecConfigArgs{...}

type GetConnectionsConnectionIpsecConfigOutput 

type GetConnectionsConnectionIpsecConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionIpsecConfigOutput) ElementType 

func (GetConnectionsConnectionIpsecConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionIpsecConfigOutput) IpsecAuthAlg 

func (o GetConnectionsConnectionIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

IPsec Auth algorithm.

func (GetConnectionsConnectionIpsecConfigOutput) IpsecEncAlg 

func (o GetConnectionsConnectionIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

IPsec Encript algorithm.

func (GetConnectionsConnectionIpsecConfigOutput) IpsecLifetime 

func (o GetConnectionsConnectionIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

IPsec lifetime.

func (GetConnectionsConnectionIpsecConfigOutput) IpsecPfs 

func (o GetConnectionsConnectionIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

DH Group.

func (GetConnectionsConnectionIpsecConfigOutput) ToGetConnectionsConnectionIpsecConfigOutput 

func (o GetConnectionsConnectionIpsecConfigOutput) ToGetConnectionsConnectionIpsecConfigOutput() GetConnectionsConnectionIpsecConfigOutput

func (GetConnectionsConnectionIpsecConfigOutput) ToGetConnectionsConnectionIpsecConfigOutputWithContext 

func (o GetConnectionsConnectionIpsecConfigOutput) ToGetConnectionsConnectionIpsecConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionIpsecConfigOutput

type GetConnectionsConnectionOutput 

type GetConnectionsConnectionOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionOutput) CreateTime 

func (o GetConnectionsConnectionOutput) CreateTime() pulumi.StringOutput

func (GetConnectionsConnectionOutput) CustomerGatewayId 

func (o GetConnectionsConnectionOutput) CustomerGatewayId() pulumi.StringOutput

Use the VPN customer gateway ID as the search key.

func (GetConnectionsConnectionOutput) EffectImmediately 

func (o GetConnectionsConnectionOutput) EffectImmediately() pulumi.BoolOutput

func (GetConnectionsConnectionOutput) ElementType 

func (GetConnectionsConnectionOutput) ElementType() reflect.Type

func (GetConnectionsConnectionOutput) EnableDpd added in v3.35.0 

func (o GetConnectionsConnectionOutput) EnableDpd() pulumi.BoolOutput

Wether enable Dpd detection.

func (GetConnectionsConnectionOutput) EnableNatTraversal added in v3.35.0 

func (o GetConnectionsConnectionOutput) EnableNatTraversal() pulumi.BoolOutput

enable nat traversal.

func (GetConnectionsConnectionOutput) EnableTunnelsBgp added in v3.49.1 

func (o GetConnectionsConnectionOutput) EnableTunnelsBgp() pulumi.BoolOutput

Enable tunnel bgp.

func (GetConnectionsConnectionOutput) Id 

func (o GetConnectionsConnectionOutput) Id() pulumi.StringOutput

ID of the VPN connection.

func (GetConnectionsConnectionOutput) IkeConfigs 

func (o GetConnectionsConnectionOutput) IkeConfigs() GetConnectionsConnectionIkeConfigArrayOutput

The ikeConfig mapping supports the following:

func (GetConnectionsConnectionOutput) IpsecConfigs 

func (o GetConnectionsConnectionOutput) IpsecConfigs() GetConnectionsConnectionIpsecConfigArrayOutput

The ipsecConfig mapping supports the following:

func (GetConnectionsConnectionOutput) LocalSubnet 

func (o GetConnectionsConnectionOutput) LocalSubnet() pulumi.StringOutput

The local subnet of the VPN connection.

func (GetConnectionsConnectionOutput) Name 

func (o GetConnectionsConnectionOutput) Name() pulumi.StringOutput

The name of the VPN connection.

func (GetConnectionsConnectionOutput) RemoteSubnet 

func (o GetConnectionsConnectionOutput) RemoteSubnet() pulumi.StringOutput

The remote subnet of the VPN connection.

func (GetConnectionsConnectionOutput) Status 

func (o GetConnectionsConnectionOutput) Status() pulumi.StringOutput

The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.

func (GetConnectionsConnectionOutput) ToGetConnectionsConnectionOutput 

func (o GetConnectionsConnectionOutput) ToGetConnectionsConnectionOutput() GetConnectionsConnectionOutput

func (GetConnectionsConnectionOutput) ToGetConnectionsConnectionOutputWithContext 

func (o GetConnectionsConnectionOutput) ToGetConnectionsConnectionOutputWithContext(ctx context.Context) GetConnectionsConnectionOutput

func (GetConnectionsConnectionOutput) TunnelOptionsSpecifications added in v3.49.1 

func (o GetConnectionsConnectionOutput) TunnelOptionsSpecifications() GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput

The tunnelOptionsSpecification supports the following:

func (GetConnectionsConnectionOutput) VcoHealthChecks added in v3.29.0 

func (o GetConnectionsConnectionOutput) VcoHealthChecks() GetConnectionsConnectionVcoHealthCheckArrayOutput

func (GetConnectionsConnectionOutput) VpnBgpConfigs added in v3.29.0 

func (o GetConnectionsConnectionOutput) VpnBgpConfigs() GetConnectionsConnectionVpnBgpConfigArrayOutput

The vpnBgpConfig mapping supports the following:

func (GetConnectionsConnectionOutput) VpnGatewayId 

func (o GetConnectionsConnectionOutput) VpnGatewayId() pulumi.StringOutput

Use the VPN gateway ID as the search key.

type GetConnectionsConnectionTunnelOptionsSpecification added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecification struct {
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId string `pulumi:"customerGatewayId"`
	// Wether enable Dpd detection.
	EnableDpd bool `pulumi:"enableDpd"`
	// enable nat traversal.
	EnableNatTraversal bool   `pulumi:"enableNatTraversal"`
	InternetIp         string `pulumi:"internetIp"`
	// The role of Tunnel.
	Role  string `pulumi:"role"`
	State string `pulumi:"state"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status string `pulumi:"status"`
	// The bgp config of Tunnel.
	TunnelBgpConfig GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfig `pulumi:"tunnelBgpConfig"`
	TunnelId        string                                                            `pulumi:"tunnelId"`
	// The configuration of Phase 1 negotiations in Tunnel.
	TunnelIkeConfig GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfig `pulumi:"tunnelIkeConfig"`
	// IPsec configuration in Tunnel.
	TunnelIpsecConfig GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfig `pulumi:"tunnelIpsecConfig"`
	ZoneNo            string                                                              `pulumi:"zoneNo"`
}

type GetConnectionsConnectionTunnelOptionsSpecificationArgs added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationArgs struct {
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId pulumi.StringInput `pulumi:"customerGatewayId"`
	// Wether enable Dpd detection.
	EnableDpd pulumi.BoolInput `pulumi:"enableDpd"`
	// enable nat traversal.
	EnableNatTraversal pulumi.BoolInput   `pulumi:"enableNatTraversal"`
	InternetIp         pulumi.StringInput `pulumi:"internetIp"`
	// The role of Tunnel.
	Role  pulumi.StringInput `pulumi:"role"`
	State pulumi.StringInput `pulumi:"state"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status pulumi.StringInput `pulumi:"status"`
	// The bgp config of Tunnel.
	TunnelBgpConfig GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigInput `pulumi:"tunnelBgpConfig"`
	TunnelId        pulumi.StringInput                                                     `pulumi:"tunnelId"`
	// The configuration of Phase 1 negotiations in Tunnel.
	TunnelIkeConfig GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigInput `pulumi:"tunnelIkeConfig"`
	// IPsec configuration in Tunnel.
	TunnelIpsecConfig GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput `pulumi:"tunnelIpsecConfig"`
	ZoneNo            pulumi.StringInput                                                       `pulumi:"zoneNo"`
}

func (GetConnectionsConnectionTunnelOptionsSpecificationArgs) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationArgs) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationOutput added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationOutput() GetConnectionsConnectionTunnelOptionsSpecificationOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationOutputWithContext added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationOutput

type GetConnectionsConnectionTunnelOptionsSpecificationArray added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationArray []GetConnectionsConnectionTunnelOptionsSpecificationInput

func (GetConnectionsConnectionTunnelOptionsSpecificationArray) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationArray) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationArray) ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutput added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationArray) ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutput() GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationArray) ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutputWithContext added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationArray) ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput

type GetConnectionsConnectionTunnelOptionsSpecificationArrayInput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutput() GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput
	ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutputWithContext(context.Context) GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput
}

GetConnectionsConnectionTunnelOptionsSpecificationArrayInput is an input type that accepts GetConnectionsConnectionTunnelOptionsSpecificationArray and GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionTunnelOptionsSpecificationArrayInput` via: 

GetConnectionsConnectionTunnelOptionsSpecificationArray{ GetConnectionsConnectionTunnelOptionsSpecificationArgs{...} }

type GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput) Index added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionTunnelOptionsSpecificationOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutput added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutput() GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutputWithContext added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationArrayOutput

type GetConnectionsConnectionTunnelOptionsSpecificationInput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationInput interface {
	pulumi.Input

	ToGetConnectionsConnectionTunnelOptionsSpecificationOutput() GetConnectionsConnectionTunnelOptionsSpecificationOutput
	ToGetConnectionsConnectionTunnelOptionsSpecificationOutputWithContext(context.Context) GetConnectionsConnectionTunnelOptionsSpecificationOutput
}

GetConnectionsConnectionTunnelOptionsSpecificationInput is an input type that accepts GetConnectionsConnectionTunnelOptionsSpecificationArgs and GetConnectionsConnectionTunnelOptionsSpecificationOutput values. You can construct a concrete instance of `GetConnectionsConnectionTunnelOptionsSpecificationInput` via: 

GetConnectionsConnectionTunnelOptionsSpecificationArgs{...}

type GetConnectionsConnectionTunnelOptionsSpecificationOutput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) CustomerGatewayId added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) CustomerGatewayId() pulumi.StringOutput

Use the VPN customer gateway ID as the search key.

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) EnableDpd added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) EnableDpd() pulumi.BoolOutput

Wether enable Dpd detection.

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) EnableNatTraversal added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) EnableNatTraversal() pulumi.BoolOutput

enable nat traversal.

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) InternetIp added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) InternetIp() pulumi.StringOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) Role added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) Role() pulumi.StringOutput

The role of Tunnel.

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) State added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) State() pulumi.StringOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) Status added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) Status() pulumi.StringOutput

The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationOutput added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationOutput() GetConnectionsConnectionTunnelOptionsSpecificationOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationOutputWithContext added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) TunnelBgpConfig added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) TunnelBgpConfig() GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

The bgp config of Tunnel.

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) TunnelId added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) TunnelId() pulumi.StringOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) TunnelIkeConfig added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) TunnelIkeConfig() GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

The configuration of Phase 1 negotiations in Tunnel.

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) TunnelIpsecConfig added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) TunnelIpsecConfig() GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

IPsec configuration in Tunnel.

func (GetConnectionsConnectionTunnelOptionsSpecificationOutput) ZoneNo added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationOutput) ZoneNo() pulumi.StringOutput

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfig added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfig struct {
	BgpStatus string `pulumi:"bgpStatus"`
	// Local asn.
	LocalAsn string `pulumi:"localAsn"`
	// Local bgp IP.
	LocalBgpIp string `pulumi:"localBgpIp"`
	// The counterpart autonomous system number.
	PeerAsn string `pulumi:"peerAsn"`
	// The BGP address on the other side.
	PeerBgpIp string `pulumi:"peerBgpIp"`
	// BGP Tunnel CIDR.
	TunnelCidr string `pulumi:"tunnelCidr"`
}

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs struct {
	BgpStatus pulumi.StringInput `pulumi:"bgpStatus"`
	// Local asn.
	LocalAsn pulumi.StringInput `pulumi:"localAsn"`
	// Local bgp IP.
	LocalBgpIp pulumi.StringInput `pulumi:"localBgpIp"`
	// The counterpart autonomous system number.
	PeerAsn pulumi.StringInput `pulumi:"peerAsn"`
	// The BGP address on the other side.
	PeerBgpIp pulumi.StringInput `pulumi:"peerBgpIp"`
	// BGP Tunnel CIDR.
	TunnelCidr pulumi.StringInput `pulumi:"tunnelCidr"`
}

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigInput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput
	ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext(context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput
}

GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigInput is an input type that accepts GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs and GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigInput` via: 

GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigArgs{...}

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) BgpStatus added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) BgpStatus() pulumi.StringOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) LocalAsn added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) LocalAsn() pulumi.StringOutput

Local asn.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) LocalBgpIp added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) LocalBgpIp() pulumi.StringOutput

Local bgp IP.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) PeerAsn added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) PeerAsn() pulumi.StringOutput

The counterpart autonomous system number.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) PeerBgpIp added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) PeerBgpIp() pulumi.StringOutput

The BGP address on the other side.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) TunnelCidr added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelBgpConfigOutput) TunnelCidr() pulumi.StringOutput

BGP Tunnel CIDR.

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfig added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfig struct {
	// IKE auth Algorithm.
	IkeAuthAlg string `pulumi:"ikeAuthAlg"`
	// IKE encript algorithm.
	IkeEncAlg string `pulumi:"ikeEncAlg"`
	// IKE lifetime.
	IkeLifetime int `pulumi:"ikeLifetime"`
	// IKE Mode.
	IkeMode string `pulumi:"ikeMode"`
	// DH Group.
	IkePfs string `pulumi:"ikePfs"`
	// IKE Version.
	IkeVersion string `pulumi:"ikeVersion"`
	// The local Id.
	LocalId string `pulumi:"localId"`
	// Preshared secret key.
	Psk string `pulumi:"psk"`
	// Remote ID.
	RemoteId string `pulumi:"remoteId"`
}

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs struct {
	// IKE auth Algorithm.
	IkeAuthAlg pulumi.StringInput `pulumi:"ikeAuthAlg"`
	// IKE encript algorithm.
	IkeEncAlg pulumi.StringInput `pulumi:"ikeEncAlg"`
	// IKE lifetime.
	IkeLifetime pulumi.IntInput `pulumi:"ikeLifetime"`
	// IKE Mode.
	IkeMode pulumi.StringInput `pulumi:"ikeMode"`
	// DH Group.
	IkePfs pulumi.StringInput `pulumi:"ikePfs"`
	// IKE Version.
	IkeVersion pulumi.StringInput `pulumi:"ikeVersion"`
	// The local Id.
	LocalId pulumi.StringInput `pulumi:"localId"`
	// Preshared secret key.
	Psk pulumi.StringInput `pulumi:"psk"`
	// Remote ID.
	RemoteId pulumi.StringInput `pulumi:"remoteId"`
}

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigInput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput
	ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext(context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput
}

GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigInput is an input type that accepts GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs and GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigInput` via: 

GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigArgs{...}

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeAuthAlg added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeAuthAlg() pulumi.StringOutput

IKE auth Algorithm.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeEncAlg added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeEncAlg() pulumi.StringOutput

IKE encript algorithm.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeLifetime added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeLifetime() pulumi.IntOutput

IKE lifetime.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeMode added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeMode() pulumi.StringOutput

IKE Mode.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkePfs added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkePfs() pulumi.StringOutput

DH Group.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeVersion added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) IkeVersion() pulumi.StringOutput

IKE Version.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) LocalId added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) LocalId() pulumi.StringOutput

The local Id.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) Psk added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) Psk() pulumi.StringOutput

Preshared secret key.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) RemoteId added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) RemoteId() pulumi.StringOutput

Remote ID.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelIkeConfigOutput

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfig added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfig struct {
	// IPsec Auth algorithm.
	IpsecAuthAlg string `pulumi:"ipsecAuthAlg"`
	// IPsec Encript algorithm.
	IpsecEncAlg string `pulumi:"ipsecEncAlg"`
	// IPsec lifetime.
	IpsecLifetime int `pulumi:"ipsecLifetime"`
	// DH Group.
	IpsecPfs string `pulumi:"ipsecPfs"`
}

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs struct {
	// IPsec Auth algorithm.
	IpsecAuthAlg pulumi.StringInput `pulumi:"ipsecAuthAlg"`
	// IPsec Encript algorithm.
	IpsecEncAlg pulumi.StringInput `pulumi:"ipsecEncAlg"`
	// IPsec lifetime.
	IpsecLifetime pulumi.IntInput `pulumi:"ipsecLifetime"`
	// DH Group.
	IpsecPfs pulumi.StringInput `pulumi:"ipsecPfs"`
}

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext added in v3.49.1 

func (i GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput
	ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext(context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput
}

GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput is an input type that accepts GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs and GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigInput` via: 

GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigArgs{...}

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput added in v3.49.1 

type GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ElementType added in v3.49.1 

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecAuthAlg added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecAuthAlg() pulumi.StringOutput

IPsec Auth algorithm.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecEncAlg added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecEncAlg() pulumi.StringOutput

IPsec Encript algorithm.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecLifetime added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecLifetime() pulumi.IntOutput

IPsec lifetime.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecPfs added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) IpsecPfs() pulumi.StringOutput

DH Group.

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput() GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

func (GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext added in v3.49.1 

func (o GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput) ToGetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionTunnelOptionsSpecificationTunnelIpsecConfigOutput

type GetConnectionsConnectionVcoHealthCheck added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheck struct {
	// The destination ip address.
	Dip *string `pulumi:"dip"`
	// The health check on status. Valid values: `true`, `false`.
	Enable *string `pulumi:"enable"`
	// The time interval between health checks.
	Interval *int `pulumi:"interval"`
	// The number of retries for health checks issued.
	Retry *int `pulumi:"retry"`
	// The source ip address.
	Sip *string `pulumi:"sip"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status *string `pulumi:"status"`
}

type GetConnectionsConnectionVcoHealthCheckArgs added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckArgs struct {
	// The destination ip address.
	Dip pulumi.StringPtrInput `pulumi:"dip"`
	// The health check on status. Valid values: `true`, `false`.
	Enable pulumi.StringPtrInput `pulumi:"enable"`
	// The time interval between health checks.
	Interval pulumi.IntPtrInput `pulumi:"interval"`
	// The number of retries for health checks issued.
	Retry pulumi.IntPtrInput `pulumi:"retry"`
	// The source ip address.
	Sip pulumi.StringPtrInput `pulumi:"sip"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status pulumi.StringPtrInput `pulumi:"status"`
}

func (GetConnectionsConnectionVcoHealthCheckArgs) ElementType added in v3.29.0 

func (GetConnectionsConnectionVcoHealthCheckArgs) ElementType() reflect.Type

func (GetConnectionsConnectionVcoHealthCheckArgs) ToGetConnectionsConnectionVcoHealthCheckOutput added in v3.29.0 

func (i GetConnectionsConnectionVcoHealthCheckArgs) ToGetConnectionsConnectionVcoHealthCheckOutput() GetConnectionsConnectionVcoHealthCheckOutput

func (GetConnectionsConnectionVcoHealthCheckArgs) ToGetConnectionsConnectionVcoHealthCheckOutputWithContext added in v3.29.0 

func (i GetConnectionsConnectionVcoHealthCheckArgs) ToGetConnectionsConnectionVcoHealthCheckOutputWithContext(ctx context.Context) GetConnectionsConnectionVcoHealthCheckOutput

type GetConnectionsConnectionVcoHealthCheckArray added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckArray []GetConnectionsConnectionVcoHealthCheckInput

func (GetConnectionsConnectionVcoHealthCheckArray) ElementType added in v3.29.0 

func (GetConnectionsConnectionVcoHealthCheckArray) ElementType() reflect.Type

func (GetConnectionsConnectionVcoHealthCheckArray) ToGetConnectionsConnectionVcoHealthCheckArrayOutput added in v3.29.0 

func (i GetConnectionsConnectionVcoHealthCheckArray) ToGetConnectionsConnectionVcoHealthCheckArrayOutput() GetConnectionsConnectionVcoHealthCheckArrayOutput

func (GetConnectionsConnectionVcoHealthCheckArray) ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext added in v3.29.0 

func (i GetConnectionsConnectionVcoHealthCheckArray) ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionVcoHealthCheckArrayOutput

type GetConnectionsConnectionVcoHealthCheckArrayInput added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionVcoHealthCheckArrayOutput() GetConnectionsConnectionVcoHealthCheckArrayOutput
	ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext(context.Context) GetConnectionsConnectionVcoHealthCheckArrayOutput
}

GetConnectionsConnectionVcoHealthCheckArrayInput is an input type that accepts GetConnectionsConnectionVcoHealthCheckArray and GetConnectionsConnectionVcoHealthCheckArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionVcoHealthCheckArrayInput` via: 

GetConnectionsConnectionVcoHealthCheckArray{ GetConnectionsConnectionVcoHealthCheckArgs{...} }

type GetConnectionsConnectionVcoHealthCheckArrayOutput added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ElementType added in v3.29.0 

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) Index added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionVcoHealthCheckOutput

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ToGetConnectionsConnectionVcoHealthCheckArrayOutput added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckArrayOutput) ToGetConnectionsConnectionVcoHealthCheckArrayOutput() GetConnectionsConnectionVcoHealthCheckArrayOutput

func (GetConnectionsConnectionVcoHealthCheckArrayOutput) ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckArrayOutput) ToGetConnectionsConnectionVcoHealthCheckArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionVcoHealthCheckArrayOutput

type GetConnectionsConnectionVcoHealthCheckInput added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckInput interface {
	pulumi.Input

	ToGetConnectionsConnectionVcoHealthCheckOutput() GetConnectionsConnectionVcoHealthCheckOutput
	ToGetConnectionsConnectionVcoHealthCheckOutputWithContext(context.Context) GetConnectionsConnectionVcoHealthCheckOutput
}

GetConnectionsConnectionVcoHealthCheckInput is an input type that accepts GetConnectionsConnectionVcoHealthCheckArgs and GetConnectionsConnectionVcoHealthCheckOutput values. You can construct a concrete instance of `GetConnectionsConnectionVcoHealthCheckInput` via: 

GetConnectionsConnectionVcoHealthCheckArgs{...}

type GetConnectionsConnectionVcoHealthCheckOutput added in v3.29.0 

type GetConnectionsConnectionVcoHealthCheckOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionVcoHealthCheckOutput) Dip added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Dip() pulumi.StringPtrOutput

The destination ip address.

func (GetConnectionsConnectionVcoHealthCheckOutput) ElementType added in v3.29.0 

func (GetConnectionsConnectionVcoHealthCheckOutput) ElementType() reflect.Type

func (GetConnectionsConnectionVcoHealthCheckOutput) Enable added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Enable() pulumi.StringPtrOutput

The health check on status. Valid values: `true`, `false`.

func (GetConnectionsConnectionVcoHealthCheckOutput) Interval added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Interval() pulumi.IntPtrOutput

The time interval between health checks.

func (GetConnectionsConnectionVcoHealthCheckOutput) Retry added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Retry() pulumi.IntPtrOutput

The number of retries for health checks issued.

func (GetConnectionsConnectionVcoHealthCheckOutput) Sip added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Sip() pulumi.StringPtrOutput

The source ip address.

func (GetConnectionsConnectionVcoHealthCheckOutput) Status added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) Status() pulumi.StringPtrOutput

The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.

func (GetConnectionsConnectionVcoHealthCheckOutput) ToGetConnectionsConnectionVcoHealthCheckOutput added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) ToGetConnectionsConnectionVcoHealthCheckOutput() GetConnectionsConnectionVcoHealthCheckOutput

func (GetConnectionsConnectionVcoHealthCheckOutput) ToGetConnectionsConnectionVcoHealthCheckOutputWithContext added in v3.29.0 

func (o GetConnectionsConnectionVcoHealthCheckOutput) ToGetConnectionsConnectionVcoHealthCheckOutputWithContext(ctx context.Context) GetConnectionsConnectionVcoHealthCheckOutput

type GetConnectionsConnectionVpnBgpConfig added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfig struct {
	// The authentication keys for BGP routing protocols.
	AuthKey *string `pulumi:"authKey"`
	// Local asn.
	LocalAsn *int `pulumi:"localAsn"`
	// Local bgp IP.
	LocalBgpIp *string `pulumi:"localBgpIp"`
	// The counterpart autonomous system number.
	PeerAsn *int `pulumi:"peerAsn"`
	// The BGP address on the other side.
	PeerBgpIp *string `pulumi:"peerBgpIp"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status *string `pulumi:"status"`
	// BGP Tunnel CIDR.
	TunnelCidr *string `pulumi:"tunnelCidr"`
}

type GetConnectionsConnectionVpnBgpConfigArgs added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigArgs struct {
	// The authentication keys for BGP routing protocols.
	AuthKey pulumi.StringPtrInput `pulumi:"authKey"`
	// Local asn.
	LocalAsn pulumi.IntPtrInput `pulumi:"localAsn"`
	// Local bgp IP.
	LocalBgpIp pulumi.StringPtrInput `pulumi:"localBgpIp"`
	// The counterpart autonomous system number.
	PeerAsn pulumi.IntPtrInput `pulumi:"peerAsn"`
	// The BGP address on the other side.
	PeerBgpIp pulumi.StringPtrInput `pulumi:"peerBgpIp"`
	// The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// BGP Tunnel CIDR.
	TunnelCidr pulumi.StringPtrInput `pulumi:"tunnelCidr"`
}

func (GetConnectionsConnectionVpnBgpConfigArgs) ElementType added in v3.29.0 

func (GetConnectionsConnectionVpnBgpConfigArgs) ElementType() reflect.Type

func (GetConnectionsConnectionVpnBgpConfigArgs) ToGetConnectionsConnectionVpnBgpConfigOutput added in v3.29.0 

func (i GetConnectionsConnectionVpnBgpConfigArgs) ToGetConnectionsConnectionVpnBgpConfigOutput() GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigArgs) ToGetConnectionsConnectionVpnBgpConfigOutputWithContext added in v3.29.0 

func (i GetConnectionsConnectionVpnBgpConfigArgs) ToGetConnectionsConnectionVpnBgpConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionVpnBgpConfigOutput

type GetConnectionsConnectionVpnBgpConfigArray added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigArray []GetConnectionsConnectionVpnBgpConfigInput

func (GetConnectionsConnectionVpnBgpConfigArray) ElementType added in v3.29.0 

func (GetConnectionsConnectionVpnBgpConfigArray) ElementType() reflect.Type

func (GetConnectionsConnectionVpnBgpConfigArray) ToGetConnectionsConnectionVpnBgpConfigArrayOutput added in v3.29.0 

func (i GetConnectionsConnectionVpnBgpConfigArray) ToGetConnectionsConnectionVpnBgpConfigArrayOutput() GetConnectionsConnectionVpnBgpConfigArrayOutput

func (GetConnectionsConnectionVpnBgpConfigArray) ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext added in v3.29.0 

func (i GetConnectionsConnectionVpnBgpConfigArray) ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionVpnBgpConfigArrayOutput

type GetConnectionsConnectionVpnBgpConfigArrayInput added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigArrayInput interface {
	pulumi.Input

	ToGetConnectionsConnectionVpnBgpConfigArrayOutput() GetConnectionsConnectionVpnBgpConfigArrayOutput
	ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext(context.Context) GetConnectionsConnectionVpnBgpConfigArrayOutput
}

GetConnectionsConnectionVpnBgpConfigArrayInput is an input type that accepts GetConnectionsConnectionVpnBgpConfigArray and GetConnectionsConnectionVpnBgpConfigArrayOutput values. You can construct a concrete instance of `GetConnectionsConnectionVpnBgpConfigArrayInput` via: 

GetConnectionsConnectionVpnBgpConfigArray{ GetConnectionsConnectionVpnBgpConfigArgs{...} }

type GetConnectionsConnectionVpnBgpConfigArrayOutput added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigArrayOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ElementType added in v3.29.0 

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ElementType() reflect.Type

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) Index added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigArrayOutput) Index(i pulumi.IntInput) GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ToGetConnectionsConnectionVpnBgpConfigArrayOutput added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigArrayOutput) ToGetConnectionsConnectionVpnBgpConfigArrayOutput() GetConnectionsConnectionVpnBgpConfigArrayOutput

func (GetConnectionsConnectionVpnBgpConfigArrayOutput) ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigArrayOutput) ToGetConnectionsConnectionVpnBgpConfigArrayOutputWithContext(ctx context.Context) GetConnectionsConnectionVpnBgpConfigArrayOutput

type GetConnectionsConnectionVpnBgpConfigInput added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigInput interface {
	pulumi.Input

	ToGetConnectionsConnectionVpnBgpConfigOutput() GetConnectionsConnectionVpnBgpConfigOutput
	ToGetConnectionsConnectionVpnBgpConfigOutputWithContext(context.Context) GetConnectionsConnectionVpnBgpConfigOutput
}

GetConnectionsConnectionVpnBgpConfigInput is an input type that accepts GetConnectionsConnectionVpnBgpConfigArgs and GetConnectionsConnectionVpnBgpConfigOutput values. You can construct a concrete instance of `GetConnectionsConnectionVpnBgpConfigInput` via: 

GetConnectionsConnectionVpnBgpConfigArgs{...}

type GetConnectionsConnectionVpnBgpConfigOutput added in v3.29.0 

type GetConnectionsConnectionVpnBgpConfigOutput struct{ *pulumi.OutputState }

func (GetConnectionsConnectionVpnBgpConfigOutput) AuthKey added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) AuthKey() pulumi.StringPtrOutput

The authentication keys for BGP routing protocols.

func (GetConnectionsConnectionVpnBgpConfigOutput) ElementType added in v3.29.0 

func (GetConnectionsConnectionVpnBgpConfigOutput) ElementType() reflect.Type

func (GetConnectionsConnectionVpnBgpConfigOutput) LocalAsn added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) LocalAsn() pulumi.IntPtrOutput

Local asn.

func (GetConnectionsConnectionVpnBgpConfigOutput) LocalBgpIp added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) LocalBgpIp() pulumi.StringPtrOutput

Local bgp IP.

func (GetConnectionsConnectionVpnBgpConfigOutput) PeerAsn added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) PeerAsn() pulumi.IntPtrOutput

The counterpart autonomous system number.

func (GetConnectionsConnectionVpnBgpConfigOutput) PeerBgpIp added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) PeerBgpIp() pulumi.StringPtrOutput

The BGP address on the other side.

func (GetConnectionsConnectionVpnBgpConfigOutput) Status added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) Status() pulumi.StringPtrOutput

The negotiation status of the BGP routing protocol. Valid values: `success`, `false`.

func (GetConnectionsConnectionVpnBgpConfigOutput) ToGetConnectionsConnectionVpnBgpConfigOutput added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) ToGetConnectionsConnectionVpnBgpConfigOutput() GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigOutput) ToGetConnectionsConnectionVpnBgpConfigOutputWithContext added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) ToGetConnectionsConnectionVpnBgpConfigOutputWithContext(ctx context.Context) GetConnectionsConnectionVpnBgpConfigOutput

func (GetConnectionsConnectionVpnBgpConfigOutput) TunnelCidr added in v3.29.0 

func (o GetConnectionsConnectionVpnBgpConfigOutput) TunnelCidr() pulumi.StringPtrOutput

BGP Tunnel CIDR.

type GetConnectionsOutputArgs added in v3.9.0 

type GetConnectionsOutputArgs struct {
	// Use the VPN customer gateway ID as the search key.
	CustomerGatewayId pulumi.StringPtrInput `pulumi:"customerGatewayId"`
	// IDs of the VPN connections.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// A regex string of VPN connection name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	// Use the VPN gateway ID as the search key.
	VpnGatewayId pulumi.StringPtrInput `pulumi:"vpnGatewayId"`
}

A collection of arguments for invoking getConnections.

func (GetConnectionsOutputArgs) ElementType added in v3.9.0 

func (GetConnectionsOutputArgs) ElementType() reflect.Type

type GetConnectionsResult 

type GetConnectionsResult struct {
	// A list of VPN connections. Each element contains the following attributes:
	Connections []GetConnectionsConnection `pulumi:"connections"`
	// The ID of the customer gateway in Tunnel.
	CustomerGatewayId *string `pulumi:"customerGatewayId"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// (Optional) IDs of the VPN connections.
	Ids       []string `pulumi:"ids"`
	NameRegex *string  `pulumi:"nameRegex"`
	// (Optional) names of the VPN connections.
	Names      []string `pulumi:"names"`
	OutputFile *string  `pulumi:"outputFile"`
	// ID of the VPN gateway.
	VpnGatewayId *string `pulumi:"vpnGatewayId"`
}

A collection of values returned by getConnections.

func GetConnections 

func GetConnections(ctx *pulumi.Context, args *GetConnectionsArgs, opts ...pulumi.InvokeOption) (*GetConnectionsResult, error)

The VPN connections data source lists lots of VPN connections resource information owned by an Alicloud account.

> **NOTE:** Available since v1.18.0.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpn.GetConnections(ctx, &vpn.GetConnectionsArgs{
			Ids: []string{
				"fake-conn-id",
			},
			VpnGatewayId:      pulumi.StringRef("fake-vpn-id"),
			CustomerGatewayId: pulumi.StringRef("fake-cgw-id"),
			OutputFile:        pulumi.StringRef("/tmp/vpnconn"),
		}, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type GetConnectionsResultOutput added in v3.9.0 

type GetConnectionsResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getConnections.

func GetConnectionsOutput added in v3.9.0 

func GetConnectionsOutput(ctx *pulumi.Context, args GetConnectionsOutputArgs, opts ...pulumi.InvokeOption) GetConnectionsResultOutput

func (GetConnectionsResultOutput) Connections added in v3.9.0 

func (o GetConnectionsResultOutput) Connections() GetConnectionsConnectionArrayOutput

A list of VPN connections. Each element contains the following attributes:

func (GetConnectionsResultOutput) CustomerGatewayId added in v3.9.0 

func (o GetConnectionsResultOutput) CustomerGatewayId() pulumi.StringPtrOutput

The ID of the customer gateway in Tunnel.

func (GetConnectionsResultOutput) ElementType added in v3.9.0 

func (GetConnectionsResultOutput) ElementType() reflect.Type

func (GetConnectionsResultOutput) Id added in v3.9.0 

func (o GetConnectionsResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetConnectionsResultOutput) Ids added in v3.9.0 

func (o GetConnectionsResultOutput) Ids() pulumi.StringArrayOutput

(Optional) IDs of the VPN connections.

func (GetConnectionsResultOutput) NameRegex added in v3.9.0 

func (o GetConnectionsResultOutput) NameRegex() pulumi.StringPtrOutput

func (GetConnectionsResultOutput) Names added in v3.9.0 

func (o GetConnectionsResultOutput) Names() pulumi.StringArrayOutput

(Optional) names of the VPN connections.

func (GetConnectionsResultOutput) OutputFile added in v3.9.0 

func (o GetConnectionsResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetConnectionsResultOutput) ToGetConnectionsResultOutput added in v3.9.0 

func (o GetConnectionsResultOutput) ToGetConnectionsResultOutput() GetConnectionsResultOutput

func (GetConnectionsResultOutput) ToGetConnectionsResultOutputWithContext added in v3.9.0 

func (o GetConnectionsResultOutput) ToGetConnectionsResultOutputWithContext(ctx context.Context) GetConnectionsResultOutput

func (GetConnectionsResultOutput) VpnGatewayId added in v3.9.0 

func (o GetConnectionsResultOutput) VpnGatewayId() pulumi.StringPtrOutput

ID of the VPN gateway.

type GetCustomerGatewaysArgs 

type GetCustomerGatewaysArgs struct {
	// ID of the VPN customer gateways.
	Ids []string `pulumi:"ids"`
	// A regex string of VPN customer gateways name.
	NameRegex *string `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile *string `pulumi:"outputFile"`
}

A collection of arguments for invoking getCustomerGateways.

type GetCustomerGatewaysGateway 

type GetCustomerGatewaysGateway struct {
	// The autonomous system number of the local data center gateway device of the VPN customer gateway.
	Asn int `pulumi:"asn"`
	// The creation time of the VPN customer gateway.
	CreateTime string `pulumi:"createTime"`
	// The description of the VPN customer gateway.
	Description string `pulumi:"description"`
	// ID of the VPN customer gateway .
	Id string `pulumi:"id"`
	// The ip address of the VPN customer gateway.
	IpAddress string `pulumi:"ipAddress"`
	// The name of the VPN customer gateway.
	Name string `pulumi:"name"`
}

type GetCustomerGatewaysGatewayArgs 

type GetCustomerGatewaysGatewayArgs struct {
	// The autonomous system number of the local data center gateway device of the VPN customer gateway.
	Asn pulumi.IntInput `pulumi:"asn"`
	// The creation time of the VPN customer gateway.
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// The description of the VPN customer gateway.
	Description pulumi.StringInput `pulumi:"description"`
	// ID of the VPN customer gateway .
	Id pulumi.StringInput `pulumi:"id"`
	// The ip address of the VPN customer gateway.
	IpAddress pulumi.StringInput `pulumi:"ipAddress"`
	// The name of the VPN customer gateway.
	Name pulumi.StringInput `pulumi:"name"`
}

func (GetCustomerGatewaysGatewayArgs) ElementType 

func (GetCustomerGatewaysGatewayArgs) ElementType() reflect.Type

func (GetCustomerGatewaysGatewayArgs) ToGetCustomerGatewaysGatewayOutput 

func (i GetCustomerGatewaysGatewayArgs) ToGetCustomerGatewaysGatewayOutput() GetCustomerGatewaysGatewayOutput

func (GetCustomerGatewaysGatewayArgs) ToGetCustomerGatewaysGatewayOutputWithContext 

func (i GetCustomerGatewaysGatewayArgs) ToGetCustomerGatewaysGatewayOutputWithContext(ctx context.Context) GetCustomerGatewaysGatewayOutput

type GetCustomerGatewaysGatewayArray 

type GetCustomerGatewaysGatewayArray []GetCustomerGatewaysGatewayInput

func (GetCustomerGatewaysGatewayArray) ElementType 

func (GetCustomerGatewaysGatewayArray) ElementType() reflect.Type

func (GetCustomerGatewaysGatewayArray) ToGetCustomerGatewaysGatewayArrayOutput 

func (i GetCustomerGatewaysGatewayArray) ToGetCustomerGatewaysGatewayArrayOutput() GetCustomerGatewaysGatewayArrayOutput

func (GetCustomerGatewaysGatewayArray) ToGetCustomerGatewaysGatewayArrayOutputWithContext 

func (i GetCustomerGatewaysGatewayArray) ToGetCustomerGatewaysGatewayArrayOutputWithContext(ctx context.Context) GetCustomerGatewaysGatewayArrayOutput

type GetCustomerGatewaysGatewayArrayInput 

type GetCustomerGatewaysGatewayArrayInput interface {
	pulumi.Input

	ToGetCustomerGatewaysGatewayArrayOutput() GetCustomerGatewaysGatewayArrayOutput
	ToGetCustomerGatewaysGatewayArrayOutputWithContext(context.Context) GetCustomerGatewaysGatewayArrayOutput
}

GetCustomerGatewaysGatewayArrayInput is an input type that accepts GetCustomerGatewaysGatewayArray and GetCustomerGatewaysGatewayArrayOutput values. You can construct a concrete instance of `GetCustomerGatewaysGatewayArrayInput` via: 

GetCustomerGatewaysGatewayArray{ GetCustomerGatewaysGatewayArgs{...} }

type GetCustomerGatewaysGatewayArrayOutput 

type GetCustomerGatewaysGatewayArrayOutput struct{ *pulumi.OutputState }

func (GetCustomerGatewaysGatewayArrayOutput) ElementType 

func (GetCustomerGatewaysGatewayArrayOutput) ElementType() reflect.Type

func (GetCustomerGatewaysGatewayArrayOutput) Index 

func (o GetCustomerGatewaysGatewayArrayOutput) Index(i pulumi.IntInput) GetCustomerGatewaysGatewayOutput

func (GetCustomerGatewaysGatewayArrayOutput) ToGetCustomerGatewaysGatewayArrayOutput 

func (o GetCustomerGatewaysGatewayArrayOutput) ToGetCustomerGatewaysGatewayArrayOutput() GetCustomerGatewaysGatewayArrayOutput

func (GetCustomerGatewaysGatewayArrayOutput) ToGetCustomerGatewaysGatewayArrayOutputWithContext 

func (o GetCustomerGatewaysGatewayArrayOutput) ToGetCustomerGatewaysGatewayArrayOutputWithContext(ctx context.Context) GetCustomerGatewaysGatewayArrayOutput

type GetCustomerGatewaysGatewayInput 

type GetCustomerGatewaysGatewayInput interface {
	pulumi.Input

	ToGetCustomerGatewaysGatewayOutput() GetCustomerGatewaysGatewayOutput
	ToGetCustomerGatewaysGatewayOutputWithContext(context.Context) GetCustomerGatewaysGatewayOutput
}

GetCustomerGatewaysGatewayInput is an input type that accepts GetCustomerGatewaysGatewayArgs and GetCustomerGatewaysGatewayOutput values. You can construct a concrete instance of `GetCustomerGatewaysGatewayInput` via: 

GetCustomerGatewaysGatewayArgs{...}

type GetCustomerGatewaysGatewayOutput 

type GetCustomerGatewaysGatewayOutput struct{ *pulumi.OutputState }

func (GetCustomerGatewaysGatewayOutput) Asn added in v3.29.0 

func (o GetCustomerGatewaysGatewayOutput) Asn() pulumi.IntOutput

The autonomous system number of the local data center gateway device of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) CreateTime 

func (o GetCustomerGatewaysGatewayOutput) CreateTime() pulumi.StringOutput

The creation time of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) Description 

func (o GetCustomerGatewaysGatewayOutput) Description() pulumi.StringOutput

The description of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) ElementType 

func (GetCustomerGatewaysGatewayOutput) ElementType() reflect.Type

func (GetCustomerGatewaysGatewayOutput) Id 

func (o GetCustomerGatewaysGatewayOutput) Id() pulumi.StringOutput

ID of the VPN customer gateway .

func (GetCustomerGatewaysGatewayOutput) IpAddress 

func (o GetCustomerGatewaysGatewayOutput) IpAddress() pulumi.StringOutput

The ip address of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) Name 

func (o GetCustomerGatewaysGatewayOutput) Name() pulumi.StringOutput

The name of the VPN customer gateway.

func (GetCustomerGatewaysGatewayOutput) ToGetCustomerGatewaysGatewayOutput 

func (o GetCustomerGatewaysGatewayOutput) ToGetCustomerGatewaysGatewayOutput() GetCustomerGatewaysGatewayOutput

func (GetCustomerGatewaysGatewayOutput) ToGetCustomerGatewaysGatewayOutputWithContext 

func (o GetCustomerGatewaysGatewayOutput) ToGetCustomerGatewaysGatewayOutputWithContext(ctx context.Context) GetCustomerGatewaysGatewayOutput

type GetCustomerGatewaysOutputArgs added in v3.9.0 

type GetCustomerGatewaysOutputArgs struct {
	// ID of the VPN customer gateways.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// A regex string of VPN customer gateways name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
}

A collection of arguments for invoking getCustomerGateways.

func (GetCustomerGatewaysOutputArgs) ElementType added in v3.9.0 

func (GetCustomerGatewaysOutputArgs) ElementType() reflect.Type

type GetCustomerGatewaysResult 

type GetCustomerGatewaysResult struct {
	// A list of VPN customer gateways. Each element contains the following attributes:
	Gateways []GetCustomerGatewaysGateway `pulumi:"gateways"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// IDs of VPN customer gateway.
	Ids       []string `pulumi:"ids"`
	NameRegex *string  `pulumi:"nameRegex"`
	// names of VPN customer gateway.
	Names      []string `pulumi:"names"`
	OutputFile *string  `pulumi:"outputFile"`
}

A collection of values returned by getCustomerGateways.

func GetCustomerGateways 

func GetCustomerGateways(ctx *pulumi.Context, args *GetCustomerGatewaysArgs, opts ...pulumi.InvokeOption) (*GetCustomerGatewaysResult, error)

The VPN customers gateways data source lists a number of VPN customer gateways resource information owned by an Alicloud account.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpn.GetCustomerGateways(ctx, &vpn.GetCustomerGatewaysArgs{
			NameRegex: pulumi.StringRef("testAcc*"),
			Ids: []string{
				"fake-id1",
				"fake-id2",
			},
			OutputFile: pulumi.StringRef("/tmp/cgws"),
		}, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type GetCustomerGatewaysResultOutput added in v3.9.0 

type GetCustomerGatewaysResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getCustomerGateways.

func GetCustomerGatewaysOutput added in v3.9.0 

func GetCustomerGatewaysOutput(ctx *pulumi.Context, args GetCustomerGatewaysOutputArgs, opts ...pulumi.InvokeOption) GetCustomerGatewaysResultOutput

func (GetCustomerGatewaysResultOutput) ElementType added in v3.9.0 

func (GetCustomerGatewaysResultOutput) ElementType() reflect.Type

func (GetCustomerGatewaysResultOutput) Gateways added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) Gateways() GetCustomerGatewaysGatewayArrayOutput

A list of VPN customer gateways. Each element contains the following attributes:

func (GetCustomerGatewaysResultOutput) Id added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetCustomerGatewaysResultOutput) Ids added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) Ids() pulumi.StringArrayOutput

IDs of VPN customer gateway.

func (GetCustomerGatewaysResultOutput) NameRegex added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) NameRegex() pulumi.StringPtrOutput

func (GetCustomerGatewaysResultOutput) Names added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) Names() pulumi.StringArrayOutput

names of VPN customer gateway.

func (GetCustomerGatewaysResultOutput) OutputFile added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetCustomerGatewaysResultOutput) ToGetCustomerGatewaysResultOutput added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) ToGetCustomerGatewaysResultOutput() GetCustomerGatewaysResultOutput

func (GetCustomerGatewaysResultOutput) ToGetCustomerGatewaysResultOutputWithContext added in v3.9.0 

func (o GetCustomerGatewaysResultOutput) ToGetCustomerGatewaysResultOutputWithContext(ctx context.Context) GetCustomerGatewaysResultOutput

type GetGatewayVcoRoutesArgs added in v3.29.0 

type GetGatewayVcoRoutesArgs struct {
	// A list of Vco Route IDs.
	Ids []string `pulumi:"ids"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile *string `pulumi:"outputFile"`
	PageNumber *int    `pulumi:"pageNumber"`
	PageSize   *int    `pulumi:"pageSize"`
	// The Routing input type. Valid values: `custom`, `bgp`.
	RouteEntryType *string `pulumi:"routeEntryType"`
	// The status of the vpn route entry. Valid values: `normal`, `published`.
	Status *string `pulumi:"status"`
	// The id of the vpn connection.
	VpnConnectionId string `pulumi:"vpnConnectionId"`
}

A collection of arguments for invoking getGatewayVcoRoutes.

type GetGatewayVcoRoutesOutputArgs added in v3.29.0 

type GetGatewayVcoRoutesOutputArgs struct {
	// A list of Vco Route IDs.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	PageNumber pulumi.IntPtrInput    `pulumi:"pageNumber"`
	PageSize   pulumi.IntPtrInput    `pulumi:"pageSize"`
	// The Routing input type. Valid values: `custom`, `bgp`.
	RouteEntryType pulumi.StringPtrInput `pulumi:"routeEntryType"`
	// The status of the vpn route entry. Valid values: `normal`, `published`.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// The id of the vpn connection.
	VpnConnectionId pulumi.StringInput `pulumi:"vpnConnectionId"`
}

A collection of arguments for invoking getGatewayVcoRoutes.

func (GetGatewayVcoRoutesOutputArgs) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesOutputArgs) ElementType() reflect.Type

type GetGatewayVcoRoutesResult added in v3.29.0 

type GetGatewayVcoRoutesResult struct {
	// The provider-assigned unique ID for this managed resource.
	Id              string                     `pulumi:"id"`
	Ids             []string                   `pulumi:"ids"`
	OutputFile      *string                    `pulumi:"outputFile"`
	PageNumber      *int                       `pulumi:"pageNumber"`
	PageSize        *int                       `pulumi:"pageSize"`
	RouteEntryType  *string                    `pulumi:"routeEntryType"`
	Routes          []GetGatewayVcoRoutesRoute `pulumi:"routes"`
	Status          *string                    `pulumi:"status"`
	VpnConnectionId string                     `pulumi:"vpnConnectionId"`
}

A collection of values returned by getGatewayVcoRoutes.

func GetGatewayVcoRoutes added in v3.29.0 

func GetGatewayVcoRoutes(ctx *pulumi.Context, args *GetGatewayVcoRoutesArgs, opts ...pulumi.InvokeOption) (*GetGatewayVcoRoutesResult, error)

This data source provides the Vpn Gateway Vco Routes of the current Alibaba Cloud user.

> **NOTE:** Available in v1.183.0+.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/cen"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		defaultInstance, err := cen.NewInstance(ctx, "default", &cen.InstanceArgs{
			CenInstanceName: pulumi.Any(name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouter, err := cen.NewTransitRouter(ctx, "default", &cen.TransitRouterArgs{
			CenId:                    defaultInstance.ID(),
			TransitRouterDescription: pulumi.String("desd"),
			TransitRouterName:        pulumi.Any(name),
		})
		if err != nil {
			return err
		}
		_default, err := cen.GetTransitRouterAvailableResources(ctx, nil, nil)
		if err != nil {
			return err
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "default", &vpn.CustomerGatewayArgs{
			Name:        pulumi.Any(name),
			IpAddress:   pulumi.String("42.104.22.210"),
			Asn:         pulumi.String("45014"),
			Description: pulumi.String("testAccVpnConnectionDesc"),
		})
		if err != nil {
			return err
		}
		defaultGatewayVpnAttachment, err := vpn.NewGatewayVpnAttachment(ctx, "default", &vpn.GatewayVpnAttachmentArgs{
			CustomerGatewayId: defaultCustomerGateway.ID(),
			NetworkType:       pulumi.String("public"),
			LocalSubnet:       pulumi.String("0.0.0.0/0"),
			RemoteSubnet:      pulumi.String("0.0.0.0/0"),
			EffectImmediately: pulumi.Bool(false),
			IkeConfig: &vpn.GatewayVpnAttachmentIkeConfigArgs{
				IkeAuthAlg:  pulumi.String("md5"),
				IkeEncAlg:   pulumi.String("des"),
				IkeVersion:  pulumi.String("ikev2"),
				IkeMode:     pulumi.String("main"),
				IkeLifetime: pulumi.Int(86400),
				Psk:         pulumi.String("tf-testvpn2"),
				IkePfs:      pulumi.String("group1"),
				RemoteId:    pulumi.String("testbob2"),
				LocalId:     pulumi.String("testalice2"),
			},
			IpsecConfig: &vpn.GatewayVpnAttachmentIpsecConfigArgs{
				IpsecPfs:      pulumi.String("group5"),
				IpsecEncAlg:   pulumi.String("des"),
				IpsecAuthAlg:  pulumi.String("md5"),
				IpsecLifetime: pulumi.Int(86400),
			},
			BgpConfig: &vpn.GatewayVpnAttachmentBgpConfigArgs{
				Enable:     pulumi.Bool(true),
				LocalAsn:   pulumi.Int(45014),
				TunnelCidr: pulumi.String("169.254.11.0/30"),
				LocalBgpIp: pulumi.String("169.254.11.1"),
			},
			HealthCheckConfig: &vpn.GatewayVpnAttachmentHealthCheckConfigArgs{
				Enable:   pulumi.Bool(true),
				Sip:      pulumi.String("192.168.1.1"),
				Dip:      pulumi.String("10.0.0.1"),
				Interval: pulumi.Int(10),
				Retry:    pulumi.Int(10),
				Policy:   pulumi.String("revoke_route"),
			},
			EnableDpd:          pulumi.Bool(true),
			EnableNatTraversal: pulumi.Bool(true),
			VpnAttachmentName:  pulumi.Any(name),
		})
		if err != nil {
			return err
		}
		defaultTransitRouterVpnAttachment, err := cen.NewTransitRouterVpnAttachment(ctx, "default", &cen.TransitRouterVpnAttachmentArgs{
			AutoPublishRouteEnabled:            pulumi.Bool(false),
			TransitRouterAttachmentDescription: pulumi.Any(name),
			TransitRouterAttachmentName:        pulumi.Any(name),
			CenId:                              defaultTransitRouter.CenId,
			TransitRouterId:                    defaultTransitRouter.TransitRouterId,
			VpnId:                              defaultGatewayVpnAttachment.ID(),
			Zones: cen.TransitRouterVpnAttachmentZoneArray{
				&cen.TransitRouterVpnAttachmentZoneArgs{
					ZoneId: pulumi.String(_default.Resources[0].MasterZones[0]),
				},
			},
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewGatewayVcoRoute(ctx, "default", &vpn.GatewayVcoRouteArgs{
			RouteDest:       pulumi.String("192.168.12.0/24"),
			NextHop:         defaultTransitRouterVpnAttachment.VpnId,
			VpnConnectionId: defaultTransitRouterVpnAttachment.VpnId,
			Weight:          pulumi.Int(100),
		})
		if err != nil {
			return err
		}
		_ = vpn.GetGatewayVcoRoutesOutput(ctx, vpn.GetGatewayVcoRoutesOutputArgs{
			VpnConnectionId: defaultTransitRouterVpnAttachment.VpnId,
		}, nil)
		ctx.Export("vpnGatewayVcoRouteId1", ids.Routes[0].Id)
		return nil
	})
}

```

type GetGatewayVcoRoutesResultOutput added in v3.29.0 

type GetGatewayVcoRoutesResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getGatewayVcoRoutes.

func GetGatewayVcoRoutesOutput added in v3.29.0 

func GetGatewayVcoRoutesOutput(ctx *pulumi.Context, args GetGatewayVcoRoutesOutputArgs, opts ...pulumi.InvokeOption) GetGatewayVcoRoutesResultOutput

func (GetGatewayVcoRoutesResultOutput) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesResultOutput) ElementType() reflect.Type

func (GetGatewayVcoRoutesResultOutput) Id added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetGatewayVcoRoutesResultOutput) Ids added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) Ids() pulumi.StringArrayOutput

func (GetGatewayVcoRoutesResultOutput) OutputFile added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetGatewayVcoRoutesResultOutput) PageNumber added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) PageNumber() pulumi.IntPtrOutput

func (GetGatewayVcoRoutesResultOutput) PageSize added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) PageSize() pulumi.IntPtrOutput

func (GetGatewayVcoRoutesResultOutput) RouteEntryType added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) RouteEntryType() pulumi.StringPtrOutput

func (GetGatewayVcoRoutesResultOutput) Routes added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) Routes() GetGatewayVcoRoutesRouteArrayOutput

func (GetGatewayVcoRoutesResultOutput) Status added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) Status() pulumi.StringPtrOutput

func (GetGatewayVcoRoutesResultOutput) ToGetGatewayVcoRoutesResultOutput added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) ToGetGatewayVcoRoutesResultOutput() GetGatewayVcoRoutesResultOutput

func (GetGatewayVcoRoutesResultOutput) ToGetGatewayVcoRoutesResultOutputWithContext added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) ToGetGatewayVcoRoutesResultOutputWithContext(ctx context.Context) GetGatewayVcoRoutesResultOutput

func (GetGatewayVcoRoutesResultOutput) VpnConnectionId added in v3.29.0 

func (o GetGatewayVcoRoutesResultOutput) VpnConnectionId() pulumi.StringOutput

type GetGatewayVcoRoutesRoute added in v3.29.0 

type GetGatewayVcoRoutesRoute struct {
	// List of autonomous system numbers through which BGP routing entries pass.
	AsPath string `pulumi:"asPath"`
	// The creation time of the VPN destination route.
	CreateTime string `pulumi:"createTime"`
	// The ID of the Vpn Gateway Vco Routes.
	Id string `pulumi:"id"`
	// The next hop of the destination route.
	NextHop string `pulumi:"nextHop"`
	// The destination network segment of the destination route.
	RouteDest string `pulumi:"routeDest"`
	// The source CIDR block of the destination route.
	Source string `pulumi:"source"`
	// The status of the vpn route entry.
	Status string `pulumi:"status"`
	// The id of the vpn connection.
	VpnConnectionId string `pulumi:"vpnConnectionId"`
	// The weight value of the destination route.
	Weight int `pulumi:"weight"`
}

type GetGatewayVcoRoutesRouteArgs added in v3.29.0 

type GetGatewayVcoRoutesRouteArgs struct {
	// List of autonomous system numbers through which BGP routing entries pass.
	AsPath pulumi.StringInput `pulumi:"asPath"`
	// The creation time of the VPN destination route.
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// The ID of the Vpn Gateway Vco Routes.
	Id pulumi.StringInput `pulumi:"id"`
	// The next hop of the destination route.
	NextHop pulumi.StringInput `pulumi:"nextHop"`
	// The destination network segment of the destination route.
	RouteDest pulumi.StringInput `pulumi:"routeDest"`
	// The source CIDR block of the destination route.
	Source pulumi.StringInput `pulumi:"source"`
	// The status of the vpn route entry.
	Status pulumi.StringInput `pulumi:"status"`
	// The id of the vpn connection.
	VpnConnectionId pulumi.StringInput `pulumi:"vpnConnectionId"`
	// The weight value of the destination route.
	Weight pulumi.IntInput `pulumi:"weight"`
}

func (GetGatewayVcoRoutesRouteArgs) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesRouteArgs) ElementType() reflect.Type

func (GetGatewayVcoRoutesRouteArgs) ToGetGatewayVcoRoutesRouteOutput added in v3.29.0 

func (i GetGatewayVcoRoutesRouteArgs) ToGetGatewayVcoRoutesRouteOutput() GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteArgs) ToGetGatewayVcoRoutesRouteOutputWithContext added in v3.29.0 

func (i GetGatewayVcoRoutesRouteArgs) ToGetGatewayVcoRoutesRouteOutputWithContext(ctx context.Context) GetGatewayVcoRoutesRouteOutput

type GetGatewayVcoRoutesRouteArray added in v3.29.0 

type GetGatewayVcoRoutesRouteArray []GetGatewayVcoRoutesRouteInput

func (GetGatewayVcoRoutesRouteArray) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesRouteArray) ElementType() reflect.Type

func (GetGatewayVcoRoutesRouteArray) ToGetGatewayVcoRoutesRouteArrayOutput added in v3.29.0 

func (i GetGatewayVcoRoutesRouteArray) ToGetGatewayVcoRoutesRouteArrayOutput() GetGatewayVcoRoutesRouteArrayOutput

func (GetGatewayVcoRoutesRouteArray) ToGetGatewayVcoRoutesRouteArrayOutputWithContext added in v3.29.0 

func (i GetGatewayVcoRoutesRouteArray) ToGetGatewayVcoRoutesRouteArrayOutputWithContext(ctx context.Context) GetGatewayVcoRoutesRouteArrayOutput

type GetGatewayVcoRoutesRouteArrayInput added in v3.29.0 

type GetGatewayVcoRoutesRouteArrayInput interface {
	pulumi.Input

	ToGetGatewayVcoRoutesRouteArrayOutput() GetGatewayVcoRoutesRouteArrayOutput
	ToGetGatewayVcoRoutesRouteArrayOutputWithContext(context.Context) GetGatewayVcoRoutesRouteArrayOutput
}

GetGatewayVcoRoutesRouteArrayInput is an input type that accepts GetGatewayVcoRoutesRouteArray and GetGatewayVcoRoutesRouteArrayOutput values. You can construct a concrete instance of `GetGatewayVcoRoutesRouteArrayInput` via: 

GetGatewayVcoRoutesRouteArray{ GetGatewayVcoRoutesRouteArgs{...} }

type GetGatewayVcoRoutesRouteArrayOutput added in v3.29.0 

type GetGatewayVcoRoutesRouteArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVcoRoutesRouteArrayOutput) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesRouteArrayOutput) ElementType() reflect.Type

func (GetGatewayVcoRoutesRouteArrayOutput) Index added in v3.29.0 

func (o GetGatewayVcoRoutesRouteArrayOutput) Index(i pulumi.IntInput) GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteArrayOutput) ToGetGatewayVcoRoutesRouteArrayOutput added in v3.29.0 

func (o GetGatewayVcoRoutesRouteArrayOutput) ToGetGatewayVcoRoutesRouteArrayOutput() GetGatewayVcoRoutesRouteArrayOutput

func (GetGatewayVcoRoutesRouteArrayOutput) ToGetGatewayVcoRoutesRouteArrayOutputWithContext added in v3.29.0 

func (o GetGatewayVcoRoutesRouteArrayOutput) ToGetGatewayVcoRoutesRouteArrayOutputWithContext(ctx context.Context) GetGatewayVcoRoutesRouteArrayOutput

type GetGatewayVcoRoutesRouteInput added in v3.29.0 

type GetGatewayVcoRoutesRouteInput interface {
	pulumi.Input

	ToGetGatewayVcoRoutesRouteOutput() GetGatewayVcoRoutesRouteOutput
	ToGetGatewayVcoRoutesRouteOutputWithContext(context.Context) GetGatewayVcoRoutesRouteOutput
}

GetGatewayVcoRoutesRouteInput is an input type that accepts GetGatewayVcoRoutesRouteArgs and GetGatewayVcoRoutesRouteOutput values. You can construct a concrete instance of `GetGatewayVcoRoutesRouteInput` via: 

GetGatewayVcoRoutesRouteArgs{...}

type GetGatewayVcoRoutesRouteOutput added in v3.29.0 

type GetGatewayVcoRoutesRouteOutput struct{ *pulumi.OutputState }

func (GetGatewayVcoRoutesRouteOutput) AsPath added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) AsPath() pulumi.StringOutput

List of autonomous system numbers through which BGP routing entries pass.

func (GetGatewayVcoRoutesRouteOutput) CreateTime added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) CreateTime() pulumi.StringOutput

The creation time of the VPN destination route.

func (GetGatewayVcoRoutesRouteOutput) ElementType added in v3.29.0 

func (GetGatewayVcoRoutesRouteOutput) ElementType() reflect.Type

func (GetGatewayVcoRoutesRouteOutput) Id added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) Id() pulumi.StringOutput

The ID of the Vpn Gateway Vco Routes.

func (GetGatewayVcoRoutesRouteOutput) NextHop added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) NextHop() pulumi.StringOutput

The next hop of the destination route.

func (GetGatewayVcoRoutesRouteOutput) RouteDest added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) RouteDest() pulumi.StringOutput

The destination network segment of the destination route.

func (GetGatewayVcoRoutesRouteOutput) Source added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) Source() pulumi.StringOutput

The source CIDR block of the destination route.

func (GetGatewayVcoRoutesRouteOutput) Status added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) Status() pulumi.StringOutput

The status of the vpn route entry.

func (GetGatewayVcoRoutesRouteOutput) ToGetGatewayVcoRoutesRouteOutput added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) ToGetGatewayVcoRoutesRouteOutput() GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteOutput) ToGetGatewayVcoRoutesRouteOutputWithContext added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) ToGetGatewayVcoRoutesRouteOutputWithContext(ctx context.Context) GetGatewayVcoRoutesRouteOutput

func (GetGatewayVcoRoutesRouteOutput) VpnConnectionId added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) VpnConnectionId() pulumi.StringOutput

The id of the vpn connection.

func (GetGatewayVcoRoutesRouteOutput) Weight added in v3.29.0 

func (o GetGatewayVcoRoutesRouteOutput) Weight() pulumi.IntOutput

The weight value of the destination route.

type GetGatewayVpnAttachmentsArgs added in v3.28.0 

type GetGatewayVpnAttachmentsArgs struct {
	// A list of Vpn Attachment IDs.
	Ids []string `pulumi:"ids"`
	// A regex string to filter results by Vpn Attachment name.
	NameRegex *string `pulumi:"nameRegex"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile *string `pulumi:"outputFile"`
	PageNumber *int    `pulumi:"pageNumber"`
	PageSize   *int    `pulumi:"pageSize"`
	// The status of the resource.
	Status *string `pulumi:"status"`
	// The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	//
	// Deprecated: The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	VpnGatewayId *string `pulumi:"vpnGatewayId"`
}

A collection of arguments for invoking getGatewayVpnAttachments.

type GetGatewayVpnAttachmentsAttachment added in v3.28.0 

type GetGatewayVpnAttachmentsAttachment struct {
	// The configurations of the BGP routing protocol.
	BgpConfigs []GetGatewayVpnAttachmentsAttachmentBgpConfig `pulumi:"bgpConfigs"`
	// The status of the IPsec-VPN connection.
	ConnectionStatus string `pulumi:"connectionStatus"`
	// The creation time of the resource.
	CreateTime string `pulumi:"createTime"`
	// The ID of the customer gateway.
	CustomerGatewayId string `pulumi:"customerGatewayId"`
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately bool `pulumi:"effectImmediately"`
	// The health check configurations.
	HealthCheckConfigs []GetGatewayVpnAttachmentsAttachmentHealthCheckConfig `pulumi:"healthCheckConfigs"`
	// The ID of the Vpn Attachment.
	Id string `pulumi:"id"`
	// Configuration negotiated in the second stage.
	IkeConfigs []GetGatewayVpnAttachmentsAttachmentIkeConfig `pulumi:"ikeConfigs"`
	InternetIp string                                        `pulumi:"internetIp"`
	// The configuration of Phase 2 negotiations.
	IpsecConfigs []GetGatewayVpnAttachmentsAttachmentIpsecConfig `pulumi:"ipsecConfigs"`
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet string `pulumi:"localSubnet"`
	// The network type.
	NetworkType string `pulumi:"networkType"`
	// The CIDR block of the on-premises data center.
	RemoteSubnet string `pulumi:"remoteSubnet"`
	// The status of the resource.
	Status string `pulumi:"status"`
	// The name of the IPsec-VPN connection.
	VpnAttachmentName string `pulumi:"vpnAttachmentName"`
	// The first ID of the resource.
	VpnConnectionId string `pulumi:"vpnConnectionId"`
}

type GetGatewayVpnAttachmentsAttachmentArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentArgs struct {
	// The configurations of the BGP routing protocol.
	BgpConfigs GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput `pulumi:"bgpConfigs"`
	// The status of the IPsec-VPN connection.
	ConnectionStatus pulumi.StringInput `pulumi:"connectionStatus"`
	// The creation time of the resource.
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// The ID of the customer gateway.
	CustomerGatewayId pulumi.StringInput `pulumi:"customerGatewayId"`
	// Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.
	EffectImmediately pulumi.BoolInput `pulumi:"effectImmediately"`
	// The health check configurations.
	HealthCheckConfigs GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput `pulumi:"healthCheckConfigs"`
	// The ID of the Vpn Attachment.
	Id pulumi.StringInput `pulumi:"id"`
	// Configuration negotiated in the second stage.
	IkeConfigs GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput `pulumi:"ikeConfigs"`
	InternetIp pulumi.StringInput                                    `pulumi:"internetIp"`
	// The configuration of Phase 2 negotiations.
	IpsecConfigs GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput `pulumi:"ipsecConfigs"`
	// The CIDR block of the virtual private cloud (VPC).
	LocalSubnet pulumi.StringInput `pulumi:"localSubnet"`
	// The network type.
	NetworkType pulumi.StringInput `pulumi:"networkType"`
	// The CIDR block of the on-premises data center.
	RemoteSubnet pulumi.StringInput `pulumi:"remoteSubnet"`
	// The status of the resource.
	Status pulumi.StringInput `pulumi:"status"`
	// The name of the IPsec-VPN connection.
	VpnAttachmentName pulumi.StringInput `pulumi:"vpnAttachmentName"`
	// The first ID of the resource.
	VpnConnectionId pulumi.StringInput `pulumi:"vpnConnectionId"`
}

func (GetGatewayVpnAttachmentsAttachmentArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentArgs) ToGetGatewayVpnAttachmentsAttachmentOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentArgs) ToGetGatewayVpnAttachmentsAttachmentOutput() GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentArgs) ToGetGatewayVpnAttachmentsAttachmentOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentArgs) ToGetGatewayVpnAttachmentsAttachmentOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentOutput

type GetGatewayVpnAttachmentsAttachmentArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentArray []GetGatewayVpnAttachmentsAttachmentInput

func (GetGatewayVpnAttachmentsAttachmentArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentArray) ToGetGatewayVpnAttachmentsAttachmentArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentArray) ToGetGatewayVpnAttachmentsAttachmentArrayOutput() GetGatewayVpnAttachmentsAttachmentArrayOutput

func (GetGatewayVpnAttachmentsAttachmentArray) ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentArray) ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentArrayOutput

type GetGatewayVpnAttachmentsAttachmentArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentArrayOutput() GetGatewayVpnAttachmentsAttachmentArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentArrayOutput
}

GetGatewayVpnAttachmentsAttachmentArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentArray and GetGatewayVpnAttachmentsAttachmentArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentArray{ GetGatewayVpnAttachmentsAttachmentArgs{...} }

type GetGatewayVpnAttachmentsAttachmentArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ToGetGatewayVpnAttachmentsAttachmentArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentArrayOutput) ToGetGatewayVpnAttachmentsAttachmentArrayOutput() GetGatewayVpnAttachmentsAttachmentArrayOutput

func (GetGatewayVpnAttachmentsAttachmentArrayOutput) ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentArrayOutput) ToGetGatewayVpnAttachmentsAttachmentArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentArrayOutput

type GetGatewayVpnAttachmentsAttachmentBgpConfig added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfig struct {
	// The ASN on the Alibaba Cloud side.
	LocalAsn string `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp string `pulumi:"localBgpIp"`
	// The status of the resource.
	Status string `pulumi:"status"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr string `pulumi:"tunnelCidr"`
}

type GetGatewayVpnAttachmentsAttachmentBgpConfigArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigArgs struct {
	// The ASN on the Alibaba Cloud side.
	LocalAsn pulumi.StringInput `pulumi:"localAsn"`
	// The BGP IP address on the Alibaba Cloud side.
	LocalBgpIp pulumi.StringInput `pulumi:"localBgpIp"`
	// The status of the resource.
	Status pulumi.StringInput `pulumi:"status"`
	// The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.
	TunnelCidr pulumi.StringInput `pulumi:"tunnelCidr"`
}

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArgs) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

type GetGatewayVpnAttachmentsAttachmentBgpConfigArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigArray []GetGatewayVpnAttachmentsAttachmentBgpConfigInput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentBgpConfigArray) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

type GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput
}

GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentBgpConfigArray and GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentBgpConfigArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentBgpConfigArray{ GetGatewayVpnAttachmentsAttachmentBgpConfigArgs{...} }

type GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

type GetGatewayVpnAttachmentsAttachmentBgpConfigInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigOutput
	ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigOutput
}

GetGatewayVpnAttachmentsAttachmentBgpConfigInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentBgpConfigArgs and GetGatewayVpnAttachmentsAttachmentBgpConfigOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentBgpConfigInput` via: 

GetGatewayVpnAttachmentsAttachmentBgpConfigArgs{...}

type GetGatewayVpnAttachmentsAttachmentBgpConfigOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentBgpConfigOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) LocalAsn added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) LocalAsn() pulumi.StringOutput

The ASN on the Alibaba Cloud side.

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) LocalBgpIp added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) LocalBgpIp() pulumi.StringOutput

The BGP IP address on the Alibaba Cloud side.

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) Status added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) Status() pulumi.StringOutput

The status of the resource.

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutput() GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) ToGetGatewayVpnAttachmentsAttachmentBgpConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentBgpConfigOutput

func (GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) TunnelCidr added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentBgpConfigOutput) TunnelCidr() pulumi.StringOutput

The CIDR block of the IPsec tunnel. The CIDR block belongs to 169.254.0.0/16. The mask of the CIDR block is 30 bits in length.

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfig added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfig struct {
	// The destination IP address.
	Dip string `pulumi:"dip"`
	// Specifies whether to enable health checks.
	Enable bool `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval int `pulumi:"interval"`
	// Whether to revoke the published route when the health check fails.
	Policy string `pulumi:"policy"`
	// The maximum number of health check retries.
	Retry int `pulumi:"retry"`
	// The source IP address.
	Sip string `pulumi:"sip"`
	// The status of the resource.
	Status string `pulumi:"status"`
}

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs struct {
	// The destination IP address.
	Dip pulumi.StringInput `pulumi:"dip"`
	// Specifies whether to enable health checks.
	Enable pulumi.BoolInput `pulumi:"enable"`
	// The interval between two consecutive health checks. Unit: seconds.
	Interval pulumi.IntInput `pulumi:"interval"`
	// Whether to revoke the published route when the health check fails.
	Policy pulumi.StringInput `pulumi:"policy"`
	// The maximum number of health check retries.
	Retry pulumi.IntInput `pulumi:"retry"`
	// The source IP address.
	Sip pulumi.StringInput `pulumi:"sip"`
	// The status of the resource.
	Status pulumi.StringInput `pulumi:"status"`
}

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray []GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput
}

GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray and GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArray{ GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs{...} }

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput
	ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput
}

GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs and GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentHealthCheckConfigInput` via: 

GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArgs{...}

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Dip added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Dip() pulumi.StringOutput

The destination IP address.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Enable added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Enable() pulumi.BoolOutput

Specifies whether to enable health checks.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Interval added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Interval() pulumi.IntOutput

The interval between two consecutive health checks. Unit: seconds.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Policy added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Policy() pulumi.StringOutput

Whether to revoke the published route when the health check fails.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Retry added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Retry() pulumi.IntOutput

The maximum number of health check retries.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Sip added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Sip() pulumi.StringOutput

The source IP address.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Status added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) Status() pulumi.StringOutput

The status of the resource.

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

func (GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput) ToGetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentHealthCheckConfigOutput

type GetGatewayVpnAttachmentsAttachmentIkeConfig added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfig struct {
	// The IKE authentication algorithm.
	IkeAuthAlg string `pulumi:"ikeAuthAlg"`
	// The IKE encryption algorithm.
	IkeEncAlg string `pulumi:"ikeEncAlg"`
	// The IKE lifetime. Unit: seconds.
	IkeLifetime string `pulumi:"ikeLifetime"`
	// The IKE negotiation mode.
	IkeMode string `pulumi:"ikeMode"`
	// The DH group.
	IkePfs string `pulumi:"ikePfs"`
	// The version of the IKE protocol.
	IkeVersion string `pulumi:"ikeVersion"`
	// The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.
	LocalId string `pulumi:"localId"`
	// The pre-shared key.
	Psk string `pulumi:"psk"`
	// The identifier of the peer. The default value is the IP address of the VPN gateway. The value can be a fully qualified domain name (FQDN) or an IP address.
	RemoteId string `pulumi:"remoteId"`
}

type GetGatewayVpnAttachmentsAttachmentIkeConfigArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigArgs struct {
	// The IKE authentication algorithm.
	IkeAuthAlg pulumi.StringInput `pulumi:"ikeAuthAlg"`
	// The IKE encryption algorithm.
	IkeEncAlg pulumi.StringInput `pulumi:"ikeEncAlg"`
	// The IKE lifetime. Unit: seconds.
	IkeLifetime pulumi.StringInput `pulumi:"ikeLifetime"`
	// The IKE negotiation mode.
	IkeMode pulumi.StringInput `pulumi:"ikeMode"`
	// The DH group.
	IkePfs pulumi.StringInput `pulumi:"ikePfs"`
	// The version of the IKE protocol.
	IkeVersion pulumi.StringInput `pulumi:"ikeVersion"`
	// The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.
	LocalId pulumi.StringInput `pulumi:"localId"`
	// The pre-shared key.
	Psk pulumi.StringInput `pulumi:"psk"`
	// The identifier of the peer. The default value is the IP address of the VPN gateway. The value can be a fully qualified domain name (FQDN) or an IP address.
	RemoteId pulumi.StringInput `pulumi:"remoteId"`
}

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

type GetGatewayVpnAttachmentsAttachmentIkeConfigArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigArray []GetGatewayVpnAttachmentsAttachmentIkeConfigInput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIkeConfigArray) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

type GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput
}

GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentIkeConfigArray and GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentIkeConfigArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentIkeConfigArray{ GetGatewayVpnAttachmentsAttachmentIkeConfigArgs{...} }

type GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

type GetGatewayVpnAttachmentsAttachmentIkeConfigInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigOutput
	ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigOutput
}

GetGatewayVpnAttachmentsAttachmentIkeConfigInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentIkeConfigArgs and GetGatewayVpnAttachmentsAttachmentIkeConfigOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentIkeConfigInput` via: 

GetGatewayVpnAttachmentsAttachmentIkeConfigArgs{...}

type GetGatewayVpnAttachmentsAttachmentIkeConfigOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIkeConfigOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeAuthAlg added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeAuthAlg() pulumi.StringOutput

The IKE authentication algorithm.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeEncAlg added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeEncAlg() pulumi.StringOutput

The IKE encryption algorithm.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeLifetime added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeLifetime() pulumi.StringOutput

The IKE lifetime. Unit: seconds.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeMode added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeMode() pulumi.StringOutput

The IKE negotiation mode.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkePfs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkePfs() pulumi.StringOutput

The DH group.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeVersion added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) IkeVersion() pulumi.StringOutput

The version of the IKE protocol.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) LocalId added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) LocalId() pulumi.StringOutput

The local ID, which supports the FQDN and IP formats. The current VPN gateway IP address is selected by default. The cen.TransitRouterVpnAttachment resource will not have a value until after it is created.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) Psk added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) Psk() pulumi.StringOutput

The pre-shared key.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) RemoteId added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) RemoteId() pulumi.StringOutput

The identifier of the peer. The default value is the IP address of the VPN gateway. The value can be a fully qualified domain name (FQDN) or an IP address.

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutput() GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIkeConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIkeConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIkeConfigOutput

type GetGatewayVpnAttachmentsAttachmentInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentOutput() GetGatewayVpnAttachmentsAttachmentOutput
	ToGetGatewayVpnAttachmentsAttachmentOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentOutput
}

GetGatewayVpnAttachmentsAttachmentInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentArgs and GetGatewayVpnAttachmentsAttachmentOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentInput` via: 

GetGatewayVpnAttachmentsAttachmentArgs{...}

type GetGatewayVpnAttachmentsAttachmentIpsecConfig added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfig struct {
	// The IPsec authentication algorithm.
	IpsecAuthAlg string `pulumi:"ipsecAuthAlg"`
	// The IPsec encryption algorithm.
	IpsecEncAlg string `pulumi:"ipsecEncAlg"`
	// The IPsec lifetime. Unit: seconds.
	IpsecLifetime string `pulumi:"ipsecLifetime"`
	// The DH group.
	IpsecPfs string `pulumi:"ipsecPfs"`
}

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs struct {
	// The IPsec authentication algorithm.
	IpsecAuthAlg pulumi.StringInput `pulumi:"ipsecAuthAlg"`
	// The IPsec encryption algorithm.
	IpsecEncAlg pulumi.StringInput `pulumi:"ipsecEncAlg"`
	// The IPsec lifetime. Unit: seconds.
	IpsecLifetime pulumi.StringInput `pulumi:"ipsecLifetime"`
	// The DH group.
	IpsecPfs pulumi.StringInput `pulumi:"ipsecPfs"`
}

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArray added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArray []GetGatewayVpnAttachmentsAttachmentIpsecConfigInput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext added in v3.28.0 

func (i GetGatewayVpnAttachmentsAttachmentIpsecConfigArray) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput
	ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput
}

GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentIpsecConfigArray and GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayInput` via: 

GetGatewayVpnAttachmentsAttachmentIpsecConfigArray{ GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs{...} }

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) Index added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) Index(i pulumi.IntInput) GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

type GetGatewayVpnAttachmentsAttachmentIpsecConfigInput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigInput interface {
	pulumi.Input

	ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput
	ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext(context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput
}

GetGatewayVpnAttachmentsAttachmentIpsecConfigInput is an input type that accepts GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs and GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput values. You can construct a concrete instance of `GetGatewayVpnAttachmentsAttachmentIpsecConfigInput` via: 

GetGatewayVpnAttachmentsAttachmentIpsecConfigArgs{...}

type GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecAuthAlg added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecAuthAlg() pulumi.StringOutput

The IPsec authentication algorithm.

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecEncAlg added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecEncAlg() pulumi.StringOutput

The IPsec encryption algorithm.

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecLifetime added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecLifetime() pulumi.StringOutput

The IPsec lifetime. Unit: seconds.

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecPfs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) IpsecPfs() pulumi.StringOutput

The DH group.

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutput() GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

func (GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput) ToGetGatewayVpnAttachmentsAttachmentIpsecConfigOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentIpsecConfigOutput

type GetGatewayVpnAttachmentsAttachmentOutput added in v3.28.0 

type GetGatewayVpnAttachmentsAttachmentOutput struct{ *pulumi.OutputState }

func (GetGatewayVpnAttachmentsAttachmentOutput) BgpConfigs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) BgpConfigs() GetGatewayVpnAttachmentsAttachmentBgpConfigArrayOutput

The configurations of the BGP routing protocol.

func (GetGatewayVpnAttachmentsAttachmentOutput) ConnectionStatus added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) ConnectionStatus() pulumi.StringOutput

The status of the IPsec-VPN connection.

func (GetGatewayVpnAttachmentsAttachmentOutput) CreateTime added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) CreateTime() pulumi.StringOutput

The creation time of the resource.

func (GetGatewayVpnAttachmentsAttachmentOutput) CustomerGatewayId added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) CustomerGatewayId() pulumi.StringOutput

The ID of the customer gateway.

func (GetGatewayVpnAttachmentsAttachmentOutput) EffectImmediately added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) EffectImmediately() pulumi.BoolOutput

Indicates whether IPsec-VPN negotiations are initiated immediately. Valid values.

func (GetGatewayVpnAttachmentsAttachmentOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsAttachmentOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsAttachmentOutput) HealthCheckConfigs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) HealthCheckConfigs() GetGatewayVpnAttachmentsAttachmentHealthCheckConfigArrayOutput

The health check configurations.

func (GetGatewayVpnAttachmentsAttachmentOutput) Id added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) Id() pulumi.StringOutput

The ID of the Vpn Attachment.

func (GetGatewayVpnAttachmentsAttachmentOutput) IkeConfigs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) IkeConfigs() GetGatewayVpnAttachmentsAttachmentIkeConfigArrayOutput

Configuration negotiated in the second stage.

func (GetGatewayVpnAttachmentsAttachmentOutput) InternetIp added in v3.29.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) InternetIp() pulumi.StringOutput

func (GetGatewayVpnAttachmentsAttachmentOutput) IpsecConfigs added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) IpsecConfigs() GetGatewayVpnAttachmentsAttachmentIpsecConfigArrayOutput

The configuration of Phase 2 negotiations.

func (GetGatewayVpnAttachmentsAttachmentOutput) LocalSubnet added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) LocalSubnet() pulumi.StringOutput

The CIDR block of the virtual private cloud (VPC).

func (GetGatewayVpnAttachmentsAttachmentOutput) NetworkType added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) NetworkType() pulumi.StringOutput

The network type.

func (GetGatewayVpnAttachmentsAttachmentOutput) RemoteSubnet added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) RemoteSubnet() pulumi.StringOutput

The CIDR block of the on-premises data center.

func (GetGatewayVpnAttachmentsAttachmentOutput) Status added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) Status() pulumi.StringOutput

The status of the resource.

func (GetGatewayVpnAttachmentsAttachmentOutput) ToGetGatewayVpnAttachmentsAttachmentOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) ToGetGatewayVpnAttachmentsAttachmentOutput() GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentOutput) ToGetGatewayVpnAttachmentsAttachmentOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) ToGetGatewayVpnAttachmentsAttachmentOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsAttachmentOutput

func (GetGatewayVpnAttachmentsAttachmentOutput) VpnAttachmentName added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) VpnAttachmentName() pulumi.StringOutput

The name of the IPsec-VPN connection.

func (GetGatewayVpnAttachmentsAttachmentOutput) VpnConnectionId added in v3.28.0 

func (o GetGatewayVpnAttachmentsAttachmentOutput) VpnConnectionId() pulumi.StringOutput

The first ID of the resource.

type GetGatewayVpnAttachmentsOutputArgs added in v3.28.0 

type GetGatewayVpnAttachmentsOutputArgs struct {
	// A list of Vpn Attachment IDs.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// A regex string to filter results by Vpn Attachment name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	PageNumber pulumi.IntPtrInput    `pulumi:"pageNumber"`
	PageSize   pulumi.IntPtrInput    `pulumi:"pageSize"`
	// The status of the resource.
	Status pulumi.StringPtrInput `pulumi:"status"`
	// The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	//
	// Deprecated: The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	VpnGatewayId pulumi.StringPtrInput `pulumi:"vpnGatewayId"`
}

A collection of arguments for invoking getGatewayVpnAttachments.

func (GetGatewayVpnAttachmentsOutputArgs) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsOutputArgs) ElementType() reflect.Type

type GetGatewayVpnAttachmentsResult added in v3.28.0 

type GetGatewayVpnAttachmentsResult struct {
	Attachments []GetGatewayVpnAttachmentsAttachment `pulumi:"attachments"`
	// The provider-assigned unique ID for this managed resource.
	Id         string   `pulumi:"id"`
	Ids        []string `pulumi:"ids"`
	NameRegex  *string  `pulumi:"nameRegex"`
	Names      []string `pulumi:"names"`
	OutputFile *string  `pulumi:"outputFile"`
	PageNumber *int     `pulumi:"pageNumber"`
	PageSize   *int     `pulumi:"pageSize"`
	Status     *string  `pulumi:"status"`
	// Deprecated: The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.
	VpnGatewayId *string `pulumi:"vpnGatewayId"`
}

A collection of values returned by getGatewayVpnAttachments.

func GetGatewayVpnAttachments added in v3.28.0 

func GetGatewayVpnAttachments(ctx *pulumi.Context, args *GetGatewayVpnAttachmentsArgs, opts ...pulumi.InvokeOption) (*GetGatewayVpnAttachmentsResult, error)

This data source provides the Vpn Gateway Vpn Attachments of the current Alibaba Cloud user.

> **NOTE:** Available in v1.181.0+.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		ids, err := vpn.GetGatewayVpnAttachments(ctx, nil, nil)
		if err != nil {
			return err
		}
		ctx.Export("vpnGatewayVpnAttachmentId1", ids.Attachments[0].Id)
		nameRegex, err := vpn.GetGatewayVpnAttachments(ctx, &vpn.GetGatewayVpnAttachmentsArgs{
			NameRegex: pulumi.StringRef("^my-VpnAttachment"),
		}, nil)
		if err != nil {
			return err
		}
		ctx.Export("vpnGatewayVpnAttachmentId2", nameRegex.Attachments[0].Id)
		ctx.Export("localId", vpnAttachments.Attachments[0].IkeConfig[0].LocalId)
		ctx.Export("internetIp", vpnAttachments.Attachments[0].InternetIp)
		return nil
	})
}

```

type GetGatewayVpnAttachmentsResultOutput added in v3.28.0 

type GetGatewayVpnAttachmentsResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getGatewayVpnAttachments.

func GetGatewayVpnAttachmentsOutput added in v3.28.0 

func GetGatewayVpnAttachmentsOutput(ctx *pulumi.Context, args GetGatewayVpnAttachmentsOutputArgs, opts ...pulumi.InvokeOption) GetGatewayVpnAttachmentsResultOutput

func (GetGatewayVpnAttachmentsResultOutput) Attachments added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Attachments() GetGatewayVpnAttachmentsAttachmentArrayOutput

func (GetGatewayVpnAttachmentsResultOutput) ElementType added in v3.28.0 

func (GetGatewayVpnAttachmentsResultOutput) ElementType() reflect.Type

func (GetGatewayVpnAttachmentsResultOutput) Id added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetGatewayVpnAttachmentsResultOutput) Ids added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Ids() pulumi.StringArrayOutput

func (GetGatewayVpnAttachmentsResultOutput) NameRegex added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) NameRegex() pulumi.StringPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) Names added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Names() pulumi.StringArrayOutput

func (GetGatewayVpnAttachmentsResultOutput) OutputFile added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) PageNumber added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) PageNumber() pulumi.IntPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) PageSize added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) PageSize() pulumi.IntPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) Status added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) Status() pulumi.StringPtrOutput

func (GetGatewayVpnAttachmentsResultOutput) ToGetGatewayVpnAttachmentsResultOutput added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) ToGetGatewayVpnAttachmentsResultOutput() GetGatewayVpnAttachmentsResultOutput

func (GetGatewayVpnAttachmentsResultOutput) ToGetGatewayVpnAttachmentsResultOutputWithContext added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) ToGetGatewayVpnAttachmentsResultOutputWithContext(ctx context.Context) GetGatewayVpnAttachmentsResultOutput

func (GetGatewayVpnAttachmentsResultOutput) VpnGatewayId deprecated added in v3.28.0 

func (o GetGatewayVpnAttachmentsResultOutput) VpnGatewayId() pulumi.StringPtrOutput

Deprecated: The parameter 'vpn_gateway_id' has been deprecated from 1.194.0.

type GetGatewayZonesArgs added in v3.48.0 

type GetGatewayZonesArgs struct {
	// A list of Zone IDs.
	Ids []string `pulumi:"ids"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile *string `pulumi:"outputFile"`
	// Bandwidth specification.-If an IPsec connection is bound to a VPN gateway instance, this parameter indicates the Bandwidth specification of the VPN gateway instance.-If an IPsec connection is bound to a forwarding router, this parameter indicates the bandwidth that you expect the IPsec connection to support.Different bandwidth specifications may affect the zone information that is found. Value:
	Spec string `pulumi:"spec"`
}

A collection of arguments for invoking getGatewayZones.

type GetGatewayZonesOutputArgs added in v3.48.0 

type GetGatewayZonesOutputArgs struct {
	// A list of Zone IDs.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// File name where to save data source results (after running `pulumi preview`).
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	// Bandwidth specification.-If an IPsec connection is bound to a VPN gateway instance, this parameter indicates the Bandwidth specification of the VPN gateway instance.-If an IPsec connection is bound to a forwarding router, this parameter indicates the bandwidth that you expect the IPsec connection to support.Different bandwidth specifications may affect the zone information that is found. Value:
	Spec pulumi.StringInput `pulumi:"spec"`
}

A collection of arguments for invoking getGatewayZones.

func (GetGatewayZonesOutputArgs) ElementType added in v3.48.0 

func (GetGatewayZonesOutputArgs) ElementType() reflect.Type

type GetGatewayZonesResult added in v3.48.0 

type GetGatewayZonesResult struct {
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// A list of Zone IDs.
	Ids        []string `pulumi:"ids"`
	OutputFile *string  `pulumi:"outputFile"`
	Spec       string   `pulumi:"spec"`
	// A list of Zone Entries. Each element contains the following attributes:
	Zones []GetGatewayZonesZone `pulumi:"zones"`
}

A collection of values returned by getGatewayZones.

func GetGatewayZones added in v3.48.0 

func GetGatewayZones(ctx *pulumi.Context, args *GetGatewayZonesArgs, opts ...pulumi.InvokeOption) (*GetGatewayZonesResult, error)

This data source provides VPN Gateway Zone available to the user.[What is Zone](https://next.api.alibabacloud.com/api/Vpc/2016-04-28/DescribeVpnGatewayAvailableZones?lang=JAVA)

> **NOTE:** Available since v1.216.0.

## Example Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := vpn.GetGatewayZones(ctx, &vpn.GetGatewayZonesArgs{
			Spec: "5M",
		}, nil)
		if err != nil {
			return err
		}
		return nil
	})
}

```

type GetGatewayZonesResultOutput added in v3.48.0 

type GetGatewayZonesResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getGatewayZones.

func GetGatewayZonesOutput added in v3.48.0 

func GetGatewayZonesOutput(ctx *pulumi.Context, args GetGatewayZonesOutputArgs, opts ...pulumi.InvokeOption) GetGatewayZonesResultOutput

func (GetGatewayZonesResultOutput) ElementType added in v3.48.0 

func (GetGatewayZonesResultOutput) ElementType() reflect.Type

func (GetGatewayZonesResultOutput) Id added in v3.48.0 

func (o GetGatewayZonesResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetGatewayZonesResultOutput) Ids added in v3.48.0 

func (o GetGatewayZonesResultOutput) Ids() pulumi.StringArrayOutput

A list of Zone IDs.

func (GetGatewayZonesResultOutput) OutputFile added in v3.48.0 

func (o GetGatewayZonesResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetGatewayZonesResultOutput) Spec added in v3.48.0 

func (o GetGatewayZonesResultOutput) Spec() pulumi.StringOutput

func (GetGatewayZonesResultOutput) ToGetGatewayZonesResultOutput added in v3.48.0 

func (o GetGatewayZonesResultOutput) ToGetGatewayZonesResultOutput() GetGatewayZonesResultOutput

func (GetGatewayZonesResultOutput) ToGetGatewayZonesResultOutputWithContext added in v3.48.0 

func (o GetGatewayZonesResultOutput) ToGetGatewayZonesResultOutputWithContext(ctx context.Context) GetGatewayZonesResultOutput

func (GetGatewayZonesResultOutput) Zones added in v3.48.0 

func (o GetGatewayZonesResultOutput) Zones() GetGatewayZonesZoneArrayOutput

A list of Zone Entries. Each element contains the following attributes:

type GetGatewayZonesZone added in v3.48.0 

type GetGatewayZonesZone struct {
	// The zone ID.
	ZoneId string `pulumi:"zoneId"`
	// The zone name.
	ZoneName string `pulumi:"zoneName"`
}

type GetGatewayZonesZoneArgs added in v3.48.0 

type GetGatewayZonesZoneArgs struct {
	// The zone ID.
	ZoneId pulumi.StringInput `pulumi:"zoneId"`
	// The zone name.
	ZoneName pulumi.StringInput `pulumi:"zoneName"`
}

func (GetGatewayZonesZoneArgs) ElementType added in v3.48.0 

func (GetGatewayZonesZoneArgs) ElementType() reflect.Type

func (GetGatewayZonesZoneArgs) ToGetGatewayZonesZoneOutput added in v3.48.0 

func (i GetGatewayZonesZoneArgs) ToGetGatewayZonesZoneOutput() GetGatewayZonesZoneOutput

func (GetGatewayZonesZoneArgs) ToGetGatewayZonesZoneOutputWithContext added in v3.48.0 

func (i GetGatewayZonesZoneArgs) ToGetGatewayZonesZoneOutputWithContext(ctx context.Context) GetGatewayZonesZoneOutput

type GetGatewayZonesZoneArray added in v3.48.0 

type GetGatewayZonesZoneArray []GetGatewayZonesZoneInput

func (GetGatewayZonesZoneArray) ElementType added in v3.48.0 

func (GetGatewayZonesZoneArray) ElementType() reflect.Type

func (GetGatewayZonesZoneArray) ToGetGatewayZonesZoneArrayOutput added in v3.48.0 

func (i GetGatewayZonesZoneArray) ToGetGatewayZonesZoneArrayOutput() GetGatewayZonesZoneArrayOutput

func (GetGatewayZonesZoneArray) ToGetGatewayZonesZoneArrayOutputWithContext added in v3.48.0 

func (i GetGatewayZonesZoneArray) ToGetGatewayZonesZoneArrayOutputWithContext(ctx context.Context) GetGatewayZonesZoneArrayOutput

type GetGatewayZonesZoneArrayInput added in v3.48.0 

type GetGatewayZonesZoneArrayInput interface {
	pulumi.Input

	ToGetGatewayZonesZoneArrayOutput() GetGatewayZonesZoneArrayOutput
	ToGetGatewayZonesZoneArrayOutputWithContext(context.Context) GetGatewayZonesZoneArrayOutput
}

GetGatewayZonesZoneArrayInput is an input type that accepts GetGatewayZonesZoneArray and GetGatewayZonesZoneArrayOutput values. You can construct a concrete instance of `GetGatewayZonesZoneArrayInput` via: 

GetGatewayZonesZoneArray{ GetGatewayZonesZoneArgs{...} }

type GetGatewayZonesZoneArrayOutput added in v3.48.0 

type GetGatewayZonesZoneArrayOutput struct{ *pulumi.OutputState }

func (GetGatewayZonesZoneArrayOutput) ElementType added in v3.48.0 

func (GetGatewayZonesZoneArrayOutput) ElementType() reflect.Type

func (GetGatewayZonesZoneArrayOutput) Index added in v3.48.0 

func (o GetGatewayZonesZoneArrayOutput) Index(i pulumi.IntInput) GetGatewayZonesZoneOutput

func (GetGatewayZonesZoneArrayOutput) ToGetGatewayZonesZoneArrayOutput added in v3.48.0 

func (o GetGatewayZonesZoneArrayOutput) ToGetGatewayZonesZoneArrayOutput() GetGatewayZonesZoneArrayOutput

func (GetGatewayZonesZoneArrayOutput) ToGetGatewayZonesZoneArrayOutputWithContext added in v3.48.0 

func (o GetGatewayZonesZoneArrayOutput) ToGetGatewayZonesZoneArrayOutputWithContext(ctx context.Context) GetGatewayZonesZoneArrayOutput

type GetGatewayZonesZoneInput added in v3.48.0 

type GetGatewayZonesZoneInput interface {
	pulumi.Input

	ToGetGatewayZonesZoneOutput() GetGatewayZonesZoneOutput
	ToGetGatewayZonesZoneOutputWithContext(context.Context) GetGatewayZonesZoneOutput
}

GetGatewayZonesZoneInput is an input type that accepts GetGatewayZonesZoneArgs and GetGatewayZonesZoneOutput values. You can construct a concrete instance of `GetGatewayZonesZoneInput` via: 

GetGatewayZonesZoneArgs{...}

type GetGatewayZonesZoneOutput added in v3.48.0 

type GetGatewayZonesZoneOutput struct{ *pulumi.OutputState }

func (GetGatewayZonesZoneOutput) ElementType added in v3.48.0 

func (GetGatewayZonesZoneOutput) ElementType() reflect.Type

func (GetGatewayZonesZoneOutput) ToGetGatewayZonesZoneOutput added in v3.48.0 

func (o GetGatewayZonesZoneOutput) ToGetGatewayZonesZoneOutput() GetGatewayZonesZoneOutput

func (GetGatewayZonesZoneOutput) ToGetGatewayZonesZoneOutputWithContext added in v3.48.0 

func (o GetGatewayZonesZoneOutput) ToGetGatewayZonesZoneOutputWithContext(ctx context.Context) GetGatewayZonesZoneOutput

func (GetGatewayZonesZoneOutput) ZoneId added in v3.48.0 

func (o GetGatewayZonesZoneOutput) ZoneId() pulumi.StringOutput

The zone ID.

func (GetGatewayZonesZoneOutput) ZoneName added in v3.48.0 

func (o GetGatewayZonesZoneOutput) ZoneName() pulumi.StringOutput

The zone name.

type GetGatewaysArgs 

type GetGatewaysArgs struct {
	// Limit search to specific business status - valid value is "Normal", "FinancialLocked".
	BusinessStatus *string `pulumi:"businessStatus"`
	// Indicates whether the IPsec-VPN feature is enabled.
	//
	// Deprecated: Field 'enable_ipsec' has been deprecated from provider version 1.193.0 and it will be removed in the future version.
	EnableIpsec *bool `pulumi:"enableIpsec"`
	// IDs of the VPN.
	Ids []string `pulumi:"ids"`
	// Include ineffective ordering data.
	IncludeReservationData *bool `pulumi:"includeReservationData"`
	// A regex string of VPN name.
	NameRegex *string `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile *string `pulumi:"outputFile"`
	// Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
	Status *string `pulumi:"status"`
	// Use the VPC ID as the search key.
	VpcId *string `pulumi:"vpcId"`
}

A collection of arguments for invoking getGateways.

type GetGatewaysGateway 

type GetGatewaysGateway struct {
	// Whether to automatically propagate BGP routes to the VPC. Valid values: `true`, `false`.
	AutoPropagate string `pulumi:"autoPropagate"`
	// Limit search to specific business status - valid value is "Normal", "FinancialLocked".
	BusinessStatus string `pulumi:"businessStatus"`
	// The creation time of the VPN gateway.
	CreateTime string `pulumi:"createTime"`
	// The description of the VPN
	Description string `pulumi:"description"`
	// The backup public IP address of the VPN gateway. The second IP address assigned by the system to create an IPsec-VPN connection. This parameter is returned only when the VPN gateway supports the dual-tunnel mode.
	DisasterRecoveryInternetIp string `pulumi:"disasterRecoveryInternetIp"`
	// - The ID of the backup VSwitch to which the VPN gateway is attached.
	DisasterRecoveryVswitchId string `pulumi:"disasterRecoveryVswitchId"`
	// Indicates whether the IPsec-VPN feature is enabled.
	EnableIpsec string `pulumi:"enableIpsec"`
	// Whether the ssl function is enabled.
	EnableSsl string `pulumi:"enableSsl"`
	// The expiration time of the VPN gateway.
	EndTime string `pulumi:"endTime"`
	// ID of the VPN.
	Id string `pulumi:"id"`
	// The charge type of the VPN gateway.
	InstanceChargeType string `pulumi:"instanceChargeType"`
	// The internet ip of the VPN.
	InternetIp string `pulumi:"internetIp"`
	// The name of the VPN.
	Name string `pulumi:"name"`
	// The network type of the VPN gateway.
	NetworkType string `pulumi:"networkType"`
	// The ID of the resource group.
	ResourceGroupId string `pulumi:"resourceGroupId"`
	// The Specification of the VPN
	Specification string `pulumi:"specification"`
	// Total count of ssl vpn connections.
	SslConnections int `pulumi:"sslConnections"`
	// The IP address of the SSL-VPN connection. This parameter is returned only when the VPN gateway is a public VPN gateway and supports only the single-tunnel mode. In addition, the VPN gateway must have the SSL-VPN feature enabled.
	SslVpnInternetIp string `pulumi:"sslVpnInternetIp"`
	// Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
	Status string `pulumi:"status"`
	// The Tag of.
	Tags map[string]interface{} `pulumi:"tags"`
	// Use the VPC ID as the search key.
	VpcId string `pulumi:"vpcId"`
	// - The VPN gateway type. Value:  Normal (default): Normal type. NationalStandard: National Secret type.
	VpnType string `pulumi:"vpnType"`
	// - The ID of the VSwitch to which the VPN gateway is attached.
	VswitchId string `pulumi:"vswitchId"`
}

type GetGatewaysGatewayArgs 

type GetGatewaysGatewayArgs struct {
	// Whether to automatically propagate BGP routes to the VPC. Valid values: `true`, `false`.
	AutoPropagate pulumi.StringInput `pulumi:"autoPropagate"`
	// Limit search to specific business status - valid value is "Normal", "FinancialLocked".
	BusinessStatus pulumi.StringInput `pulumi:"businessStatus"`
	// The creation time of the VPN gateway.
	CreateTime pulumi.StringInput `pulumi:"createTime"`
	// The description of the VPN
	Description pulumi.StringInput `pulumi:"description"`
	// The backup public IP address of the VPN gateway. The second IP address assigned by the system to create an IPsec-VPN connection. This parameter is returned only when the VPN gateway supports the dual-tunnel mode.
	DisasterRecoveryInternetIp pulumi.StringInput `pulumi:"disasterRecoveryInternetIp"`
	// - The ID of the backup VSwitch to which the VPN gateway is attached.
	DisasterRecoveryVswitchId pulumi.StringInput `pulumi:"disasterRecoveryVswitchId"`
	// Indicates whether the IPsec-VPN feature is enabled.
	EnableIpsec pulumi.StringInput `pulumi:"enableIpsec"`
	// Whether the ssl function is enabled.
	EnableSsl pulumi.StringInput `pulumi:"enableSsl"`
	// The expiration time of the VPN gateway.
	EndTime pulumi.StringInput `pulumi:"endTime"`
	// ID of the VPN.
	Id pulumi.StringInput `pulumi:"id"`
	// The charge type of the VPN gateway.
	InstanceChargeType pulumi.StringInput `pulumi:"instanceChargeType"`
	// The internet ip of the VPN.
	InternetIp pulumi.StringInput `pulumi:"internetIp"`
	// The name of the VPN.
	Name pulumi.StringInput `pulumi:"name"`
	// The network type of the VPN gateway.
	NetworkType pulumi.StringInput `pulumi:"networkType"`
	// The ID of the resource group.
	ResourceGroupId pulumi.StringInput `pulumi:"resourceGroupId"`
	// The Specification of the VPN
	Specification pulumi.StringInput `pulumi:"specification"`
	// Total count of ssl vpn connections.
	SslConnections pulumi.IntInput `pulumi:"sslConnections"`
	// The IP address of the SSL-VPN connection. This parameter is returned only when the VPN gateway is a public VPN gateway and supports only the single-tunnel mode. In addition, the VPN gateway must have the SSL-VPN feature enabled.
	SslVpnInternetIp pulumi.StringInput `pulumi:"sslVpnInternetIp"`
	// Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
	Status pulumi.StringInput `pulumi:"status"`
	// The Tag of.
	Tags pulumi.MapInput `pulumi:"tags"`
	// Use the VPC ID as the search key.
	VpcId pulumi.StringInput `pulumi:"vpcId"`
	// - The VPN gateway type. Value:  Normal (default): Normal type. NationalStandard: National Secret type.
	VpnType pulumi.StringInput `pulumi:"vpnType"`
	// - The ID of the VSwitch to which the VPN gateway is attached.
	VswitchId pulumi.StringInput `pulumi:"vswitchId"`
}

func (GetGatewaysGatewayArgs) ElementType 

func (GetGatewaysGatewayArgs) ElementType() reflect.Type

func (GetGatewaysGatewayArgs) ToGetGatewaysGatewayOutput 

func (i GetGatewaysGatewayArgs) ToGetGatewaysGatewayOutput() GetGatewaysGatewayOutput

func (GetGatewaysGatewayArgs) ToGetGatewaysGatewayOutputWithContext 

func (i GetGatewaysGatewayArgs) ToGetGatewaysGatewayOutputWithContext(ctx context.Context) GetGatewaysGatewayOutput

type GetGatewaysGatewayArray 

type GetGatewaysGatewayArray []GetGatewaysGatewayInput

func (GetGatewaysGatewayArray) ElementType 

func (GetGatewaysGatewayArray) ElementType() reflect.Type

func (GetGatewaysGatewayArray) ToGetGatewaysGatewayArrayOutput 

func (i GetGatewaysGatewayArray) ToGetGatewaysGatewayArrayOutput() GetGatewaysGatewayArrayOutput

func (GetGatewaysGatewayArray) ToGetGatewaysGatewayArrayOutputWithContext 

func (i GetGatewaysGatewayArray) ToGetGatewaysGatewayArrayOutputWithContext(ctx context.Context) GetGatewaysGatewayArrayOutput

type GetGatewaysGatewayArrayInput 

type GetGatewaysGatewayArrayInput interface {
	pulumi.Input

	ToGetGatewaysGatewayArrayOutput() GetGatewaysGatewayArrayOutput
	ToGetGatewaysGatewayArrayOutputWithContext(context.Context) GetGatewaysGatewayArrayOutput
}

GetGatewaysGatewayArrayInput is an input type that accepts GetGatewaysGatewayArray and GetGatewaysGatewayArrayOutput values. You can construct a concrete instance of `GetGatewaysGatewayArrayInput` via: 

GetGatewaysGatewayArray{ GetGatewaysGatewayArgs{...} }

type GetGatewaysGatewayArrayOutput 

type GetGatewaysGatewayArrayOutput struct{ *pulumi.OutputState }

func (GetGatewaysGatewayArrayOutput) ElementType 

func (GetGatewaysGatewayArrayOutput) ElementType() reflect.Type

func (GetGatewaysGatewayArrayOutput) Index 

func (o GetGatewaysGatewayArrayOutput) Index(i pulumi.IntInput) GetGatewaysGatewayOutput

func (GetGatewaysGatewayArrayOutput) ToGetGatewaysGatewayArrayOutput 

func (o GetGatewaysGatewayArrayOutput) ToGetGatewaysGatewayArrayOutput() GetGatewaysGatewayArrayOutput

func (GetGatewaysGatewayArrayOutput) ToGetGatewaysGatewayArrayOutputWithContext 

func (o GetGatewaysGatewayArrayOutput) ToGetGatewaysGatewayArrayOutputWithContext(ctx context.Context) GetGatewaysGatewayArrayOutput

type GetGatewaysGatewayInput 

type GetGatewaysGatewayInput interface {
	pulumi.Input

	ToGetGatewaysGatewayOutput() GetGatewaysGatewayOutput
	ToGetGatewaysGatewayOutputWithContext(context.Context) GetGatewaysGatewayOutput
}

GetGatewaysGatewayInput is an input type that accepts GetGatewaysGatewayArgs and GetGatewaysGatewayOutput values. You can construct a concrete instance of `GetGatewaysGatewayInput` via: 

GetGatewaysGatewayArgs{...}

type GetGatewaysGatewayOutput 

type GetGatewaysGatewayOutput struct{ *pulumi.OutputState }

func (GetGatewaysGatewayOutput) AutoPropagate added in v3.29.0 

func (o GetGatewaysGatewayOutput) AutoPropagate() pulumi.StringOutput

Whether to automatically propagate BGP routes to the VPC. Valid values: `true`, `false`.

func (GetGatewaysGatewayOutput) BusinessStatus 

func (o GetGatewaysGatewayOutput) BusinessStatus() pulumi.StringOutput

Limit search to specific business status - valid value is "Normal", "FinancialLocked".

func (GetGatewaysGatewayOutput) CreateTime 

func (o GetGatewaysGatewayOutput) CreateTime() pulumi.StringOutput

The creation time of the VPN gateway.

func (GetGatewaysGatewayOutput) Description 

func (o GetGatewaysGatewayOutput) Description() pulumi.StringOutput

The description of the VPN

func (GetGatewaysGatewayOutput) DisasterRecoveryInternetIp added in v3.50.0 

func (o GetGatewaysGatewayOutput) DisasterRecoveryInternetIp() pulumi.StringOutput

The backup public IP address of the VPN gateway. The second IP address assigned by the system to create an IPsec-VPN connection. This parameter is returned only when the VPN gateway supports the dual-tunnel mode.

func (GetGatewaysGatewayOutput) DisasterRecoveryVswitchId added in v3.49.1 

func (o GetGatewaysGatewayOutput) DisasterRecoveryVswitchId() pulumi.StringOutput

- The ID of the backup VSwitch to which the VPN gateway is attached.

func (GetGatewaysGatewayOutput) ElementType 

func (GetGatewaysGatewayOutput) ElementType() reflect.Type

func (GetGatewaysGatewayOutput) EnableIpsec 

func (o GetGatewaysGatewayOutput) EnableIpsec() pulumi.StringOutput

Indicates whether the IPsec-VPN feature is enabled.

func (GetGatewaysGatewayOutput) EnableSsl 

func (o GetGatewaysGatewayOutput) EnableSsl() pulumi.StringOutput

Whether the ssl function is enabled.

func (GetGatewaysGatewayOutput) EndTime 

func (o GetGatewaysGatewayOutput) EndTime() pulumi.StringOutput

The expiration time of the VPN gateway.

func (GetGatewaysGatewayOutput) Id 

func (o GetGatewaysGatewayOutput) Id() pulumi.StringOutput

ID of the VPN.

func (GetGatewaysGatewayOutput) InstanceChargeType 

func (o GetGatewaysGatewayOutput) InstanceChargeType() pulumi.StringOutput

The charge type of the VPN gateway.

func (GetGatewaysGatewayOutput) InternetIp 

func (o GetGatewaysGatewayOutput) InternetIp() pulumi.StringOutput

The internet ip of the VPN.

func (GetGatewaysGatewayOutput) Name 

func (o GetGatewaysGatewayOutput) Name() pulumi.StringOutput

The name of the VPN.

func (GetGatewaysGatewayOutput) NetworkType added in v3.29.0 

func (o GetGatewaysGatewayOutput) NetworkType() pulumi.StringOutput

The network type of the VPN gateway.

func (GetGatewaysGatewayOutput) ResourceGroupId added in v3.49.1 

func (o GetGatewaysGatewayOutput) ResourceGroupId() pulumi.StringOutput

The ID of the resource group.

func (GetGatewaysGatewayOutput) Specification 

func (o GetGatewaysGatewayOutput) Specification() pulumi.StringOutput

The Specification of the VPN

func (GetGatewaysGatewayOutput) SslConnections 

func (o GetGatewaysGatewayOutput) SslConnections() pulumi.IntOutput

Total count of ssl vpn connections.

func (GetGatewaysGatewayOutput) SslVpnInternetIp added in v3.49.1 

func (o GetGatewaysGatewayOutput) SslVpnInternetIp() pulumi.StringOutput

The IP address of the SSL-VPN connection. This parameter is returned only when the VPN gateway is a public VPN gateway and supports only the single-tunnel mode. In addition, the VPN gateway must have the SSL-VPN feature enabled.

func (GetGatewaysGatewayOutput) Status 

func (o GetGatewaysGatewayOutput) Status() pulumi.StringOutput

Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".

func (GetGatewaysGatewayOutput) Tags added in v3.49.1 

func (o GetGatewaysGatewayOutput) Tags() pulumi.MapOutput

The Tag of.

func (GetGatewaysGatewayOutput) ToGetGatewaysGatewayOutput 

func (o GetGatewaysGatewayOutput) ToGetGatewaysGatewayOutput() GetGatewaysGatewayOutput

func (GetGatewaysGatewayOutput) ToGetGatewaysGatewayOutputWithContext 

func (o GetGatewaysGatewayOutput) ToGetGatewaysGatewayOutputWithContext(ctx context.Context) GetGatewaysGatewayOutput

func (GetGatewaysGatewayOutput) VpcId 

func (o GetGatewaysGatewayOutput) VpcId() pulumi.StringOutput

Use the VPC ID as the search key.

func (GetGatewaysGatewayOutput) VpnType added in v3.49.1 

func (o GetGatewaysGatewayOutput) VpnType() pulumi.StringOutput

- The VPN gateway type. Value: Normal (default): Normal type. NationalStandard: National Secret type.

func (GetGatewaysGatewayOutput) VswitchId added in v3.49.1 

func (o GetGatewaysGatewayOutput) VswitchId() pulumi.StringOutput

- The ID of the VSwitch to which the VPN gateway is attached.

type GetGatewaysOutputArgs added in v3.9.0 

type GetGatewaysOutputArgs struct {
	// Limit search to specific business status - valid value is "Normal", "FinancialLocked".
	BusinessStatus pulumi.StringPtrInput `pulumi:"businessStatus"`
	// Indicates whether the IPsec-VPN feature is enabled.
	//
	// Deprecated: Field 'enable_ipsec' has been deprecated from provider version 1.193.0 and it will be removed in the future version.
	EnableIpsec pulumi.BoolPtrInput `pulumi:"enableIpsec"`
	// IDs of the VPN.
	Ids pulumi.StringArrayInput `pulumi:"ids"`
	// Include ineffective ordering data.
	IncludeReservationData pulumi.BoolPtrInput `pulumi:"includeReservationData"`
	// A regex string of VPN name.
	NameRegex pulumi.StringPtrInput `pulumi:"nameRegex"`
	// Save the result to the file.
	OutputFile pulumi.StringPtrInput `pulumi:"outputFile"`
	// Limit search to specific status - valid value is "Init", "Provisioning", "Active", "Updating", "Deleting".
	Status pulumi.StringPtrInput `pulumi:"status"`
	// Use the VPC ID as the search key.
	VpcId pulumi.StringPtrInput `pulumi:"vpcId"`
}

A collection of arguments for invoking getGateways.

func (GetGatewaysOutputArgs) ElementType added in v3.9.0 

func (GetGatewaysOutputArgs) ElementType() reflect.Type

type GetGatewaysResult 

type GetGatewaysResult struct {
	// The business status of the VPN gateway.
	BusinessStatus *string `pulumi:"businessStatus"`
	// Whether the ipsec function is enabled.
	//
	// Deprecated: Field 'enable_ipsec' has been deprecated from provider version 1.193.0 and it will be removed in the future version.
	EnableIpsec *bool `pulumi:"enableIpsec"`
	// A list of VPN gateways. Each element contains the following attributes:
	Gateways []GetGatewaysGateway `pulumi:"gateways"`
	// The provider-assigned unique ID for this managed resource.
	Id string `pulumi:"id"`
	// IDs of the VPN.
	Ids                    []string `pulumi:"ids"`
	IncludeReservationData *bool    `pulumi:"includeReservationData"`
	NameRegex              *string  `pulumi:"nameRegex"`
	// names of the VPN.
	Names      []string `pulumi:"names"`
	OutputFile *string  `pulumi:"outputFile"`
	// The status of the VPN
	Status *string `pulumi:"status"`
	// ID of the VPC that the VPN belongs.
	VpcId *string `pulumi:"vpcId"`
}

A collection of values returned by getGateways.

func GetGateways 

func GetGateways(ctx *pulumi.Context, args *GetGatewaysArgs, opts ...pulumi.InvokeOption) (*GetGatewaysResult, error)

The VPNs data source lists a number of VPNs resource information owned by an Alicloud account.

> **NOTE:** Available since v1.18.0.

type GetGatewaysResultOutput added in v3.9.0 

type GetGatewaysResultOutput struct{ *pulumi.OutputState }

A collection of values returned by getGateways.

func GetGatewaysOutput added in v3.9.0 

func GetGatewaysOutput(ctx *pulumi.Context, args GetGatewaysOutputArgs, opts ...pulumi.InvokeOption) GetGatewaysResultOutput

func (GetGatewaysResultOutput) BusinessStatus added in v3.9.0 

func (o GetGatewaysResultOutput) BusinessStatus() pulumi.StringPtrOutput

The business status of the VPN gateway.

func (GetGatewaysResultOutput) ElementType added in v3.9.0 

func (GetGatewaysResultOutput) ElementType() reflect.Type

func (GetGatewaysResultOutput) EnableIpsec deprecated added in v3.20.0 

func (o GetGatewaysResultOutput) EnableIpsec() pulumi.BoolPtrOutput

Whether the ipsec function is enabled.

Deprecated: Field 'enable_ipsec' has been deprecated from provider version 1.193.0 and it will be removed in the future version.

func (GetGatewaysResultOutput) Gateways added in v3.9.0 

func (o GetGatewaysResultOutput) Gateways() GetGatewaysGatewayArrayOutput

A list of VPN gateways. Each element contains the following attributes:

func (GetGatewaysResultOutput) Id added in v3.9.0 

func (o GetGatewaysResultOutput) Id() pulumi.StringOutput

The provider-assigned unique ID for this managed resource.

func (GetGatewaysResultOutput) Ids added in v3.9.0 

func (o GetGatewaysResultOutput) Ids() pulumi.StringArrayOutput

IDs of the VPN.

func (GetGatewaysResultOutput) IncludeReservationData added in v3.29.0 

func (o GetGatewaysResultOutput) IncludeReservationData() pulumi.BoolPtrOutput

func (GetGatewaysResultOutput) NameRegex added in v3.9.0 

func (o GetGatewaysResultOutput) NameRegex() pulumi.StringPtrOutput

func (GetGatewaysResultOutput) Names added in v3.9.0 

func (o GetGatewaysResultOutput) Names() pulumi.StringArrayOutput

names of the VPN.

func (GetGatewaysResultOutput) OutputFile added in v3.9.0 

func (o GetGatewaysResultOutput) OutputFile() pulumi.StringPtrOutput

func (GetGatewaysResultOutput) Status added in v3.9.0 

func (o GetGatewaysResultOutput) Status() pulumi.StringPtrOutput

The status of the VPN

func (GetGatewaysResultOutput) ToGetGatewaysResultOutput added in v3.9.0 

func (o GetGatewaysResultOutput) ToGetGatewaysResultOutput() GetGatewaysResultOutput

func (GetGatewaysResultOutput) ToGetGatewaysResultOutputWithContext added in v3.9.0 

func (o GetGatewaysResultOutput) ToGetGatewaysResultOutputWithContext(ctx context.Context) GetGatewaysResultOutput

func (GetGatewaysResultOutput) VpcId added in v3.9.0 

func (o GetGatewaysResultOutput) VpcId() pulumi.StringPtrOutput

ID of the VPC that the VPN belongs.

type IpsecServer added in v3.20.0 

type IpsecServer struct {
	pulumi.CustomResourceState

	// The client CIDR block. It refers to the CIDR block that is allocated to the virtual interface of the client.
	ClientIpPool pulumi.StringOutput `pulumi:"clientIpPool"`
	// The dry run.
	DryRun pulumi.BoolPtrOutput `pulumi:"dryRun"`
	// Specifies whether you want the configuration to immediately take effect.
	EffectImmediately pulumi.BoolPtrOutput `pulumi:"effectImmediately"`
	// The configuration of Phase 1 negotiations. See `ikeConfig` below.
	IkeConfigs IpsecServerIkeConfigArrayOutput `pulumi:"ikeConfigs"`
	// The configuration of Phase 2 negotiations. See `ipsecConfig` below.
	IpsecConfigs IpsecServerIpsecConfigArrayOutput `pulumi:"ipsecConfigs"`
	// The name of the IPsec server. The name must be `2` to `128` characters in length, and can contain digits, hyphens (-), and underscores (_). It must start with a letter.
	IpsecServerName pulumi.StringPtrOutput `pulumi:"ipsecServerName"`
	// The local CIDR block. It refers to the CIDR block of the virtual private cloud (VPC) that is used to connect with the client. Separate multiple CIDR blocks with commas (,). Example: `192.168.1.0/24,192.168.2.0/24`.
	LocalSubnet pulumi.StringOutput `pulumi:"localSubnet"`
	// The pre-shared key. The pre-shared key is used to authenticate the VPN gateway and the client. By default, the system generates a random string that is 16 bits in length. You can also specify the pre-shared key. It can contain at most 100 characters.
	Psk pulumi.StringOutput `pulumi:"psk"`
	// Whether to enable the pre-shared key authentication method. The value is only `true`, which indicates that the pre-shared key authentication method is enabled.
	PskEnabled pulumi.BoolPtrOutput `pulumi:"pskEnabled"`
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
}

Provides a VPN Ipsec Server resource.

For information about VPN Ipsec Server and how to use it, see [What is Ipsec Server](https://www.alibabacloud.com/help/en/doc-detail/205454.html).

> **NOTE:** Available since v1.161.0+.

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpc"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		name := "tf-example"
		if param := cfg.Get("name"); param != "" {
			name = param
		}
		_default, err := alicloud.GetZones(ctx, &alicloud.GetZonesArgs{
			AvailableResourceCreation: pulumi.StringRef("VSwitch"),
		}, nil)
		if err != nil {
			return err
		}
		defaultGetNetworks, err := vpc.GetNetworks(ctx, &vpc.GetNetworksArgs{
			NameRegex: pulumi.StringRef("^default-NODELETING$"),
		}, nil)
		if err != nil {
			return err
		}
		defaultGetSwitches, err := vpc.GetSwitches(ctx, &vpc.GetSwitchesArgs{
			VpcId:  pulumi.StringRef(defaultGetNetworks.Ids[0]),
			ZoneId: pulumi.StringRef(_default.Ids[0]),
		}, nil)
		if err != nil {
			return err
		}
		defaultGateway, err := vpn.NewGateway(ctx, "default", &vpn.GatewayArgs{
			Name:               pulumi.String(name),
			VpcId:              pulumi.String(defaultGetNetworks.Ids[0]),
			Bandwidth:          pulumi.Int(10),
			EnableSsl:          pulumi.Bool(true),
			Description:        pulumi.String(name),
			InstanceChargeType: pulumi.String("PrePaid"),
			VswitchId:          pulumi.String(defaultGetSwitches.Ids[0]),
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewIpsecServer(ctx, "foo", &vpn.IpsecServerArgs{
			ClientIpPool:    pulumi.String("10.0.0.0/24"),
			IpsecServerName: pulumi.String(name),
			LocalSubnet:     pulumi.String("192.168.0.0/24"),
			VpnGatewayId:    defaultGateway.ID(),
			PskEnabled:      pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN Ipsec Server can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/ipsecServer:IpsecServer example <id> ```

func GetIpsecServer added in v3.20.0 

func GetIpsecServer(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *IpsecServerState, opts ...pulumi.ResourceOption) (*IpsecServer, error)

GetIpsecServer gets an existing IpsecServer resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewIpsecServer added in v3.20.0 

func NewIpsecServer(ctx *pulumi.Context,
	name string, args *IpsecServerArgs, opts ...pulumi.ResourceOption) (*IpsecServer, error)

NewIpsecServer registers a new resource with the given unique name, arguments, and options.

func (*IpsecServer) ElementType added in v3.20.0 

func (*IpsecServer) ElementType() reflect.Type

func (*IpsecServer) ToIpsecServerOutput added in v3.20.0 

func (i *IpsecServer) ToIpsecServerOutput() IpsecServerOutput

func (*IpsecServer) ToIpsecServerOutputWithContext added in v3.20.0 

func (i *IpsecServer) ToIpsecServerOutputWithContext(ctx context.Context) IpsecServerOutput

type IpsecServerArgs added in v3.20.0 

type IpsecServerArgs struct {
	// The client CIDR block. It refers to the CIDR block that is allocated to the virtual interface of the client.
	ClientIpPool pulumi.StringInput
	// The dry run.
	DryRun pulumi.BoolPtrInput
	// Specifies whether you want the configuration to immediately take effect.
	EffectImmediately pulumi.BoolPtrInput
	// The configuration of Phase 1 negotiations. See `ikeConfig` below.
	IkeConfigs IpsecServerIkeConfigArrayInput
	// The configuration of Phase 2 negotiations. See `ipsecConfig` below.
	IpsecConfigs IpsecServerIpsecConfigArrayInput
	// The name of the IPsec server. The name must be `2` to `128` characters in length, and can contain digits, hyphens (-), and underscores (_). It must start with a letter.
	IpsecServerName pulumi.StringPtrInput
	// The local CIDR block. It refers to the CIDR block of the virtual private cloud (VPC) that is used to connect with the client. Separate multiple CIDR blocks with commas (,). Example: `192.168.1.0/24,192.168.2.0/24`.
	LocalSubnet pulumi.StringInput
	// The pre-shared key. The pre-shared key is used to authenticate the VPN gateway and the client. By default, the system generates a random string that is 16 bits in length. You can also specify the pre-shared key. It can contain at most 100 characters.
	Psk pulumi.StringPtrInput
	// Whether to enable the pre-shared key authentication method. The value is only `true`, which indicates that the pre-shared key authentication method is enabled.
	PskEnabled pulumi.BoolPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringInput
}

The set of arguments for constructing a IpsecServer resource.

func (IpsecServerArgs) ElementType added in v3.20.0 

func (IpsecServerArgs) ElementType() reflect.Type

type IpsecServerArray added in v3.20.0 

type IpsecServerArray []IpsecServerInput

func (IpsecServerArray) ElementType added in v3.20.0 

func (IpsecServerArray) ElementType() reflect.Type

func (IpsecServerArray) ToIpsecServerArrayOutput added in v3.20.0 

func (i IpsecServerArray) ToIpsecServerArrayOutput() IpsecServerArrayOutput

func (IpsecServerArray) ToIpsecServerArrayOutputWithContext added in v3.20.0 

func (i IpsecServerArray) ToIpsecServerArrayOutputWithContext(ctx context.Context) IpsecServerArrayOutput

type IpsecServerArrayInput added in v3.20.0 

type IpsecServerArrayInput interface {
	pulumi.Input

	ToIpsecServerArrayOutput() IpsecServerArrayOutput
	ToIpsecServerArrayOutputWithContext(context.Context) IpsecServerArrayOutput
}

IpsecServerArrayInput is an input type that accepts IpsecServerArray and IpsecServerArrayOutput values. You can construct a concrete instance of `IpsecServerArrayInput` via: 

IpsecServerArray{ IpsecServerArgs{...} }

type IpsecServerArrayOutput added in v3.20.0 

type IpsecServerArrayOutput struct{ *pulumi.OutputState }

func (IpsecServerArrayOutput) ElementType added in v3.20.0 

func (IpsecServerArrayOutput) ElementType() reflect.Type

func (IpsecServerArrayOutput) Index added in v3.20.0 

func (o IpsecServerArrayOutput) Index(i pulumi.IntInput) IpsecServerOutput

func (IpsecServerArrayOutput) ToIpsecServerArrayOutput added in v3.20.0 

func (o IpsecServerArrayOutput) ToIpsecServerArrayOutput() IpsecServerArrayOutput

func (IpsecServerArrayOutput) ToIpsecServerArrayOutputWithContext added in v3.20.0 

func (o IpsecServerArrayOutput) ToIpsecServerArrayOutputWithContext(ctx context.Context) IpsecServerArrayOutput

type IpsecServerIkeConfig added in v3.20.0 

type IpsecServerIkeConfig struct {
	// The authentication algorithm that is used in Phase 1 negotiations. Default value: `sha1`.
	IkeAuthAlg *string `pulumi:"ikeAuthAlg"`
	// The encryption algorithm that is used in Phase 1 negotiations. Default value: `aes`.
	IkeEncAlg *string `pulumi:"ikeEncAlg"`
	// IkeLifetime: the SA lifetime determined by Phase 1 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.
	IkeLifetime *int `pulumi:"ikeLifetime"`
	// The IKE negotiation mode. Default value: `main`.
	IkeMode *string `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Default value: `group2`.
	IkePfs *string `pulumi:"ikePfs"`
	// The IKE version. Valid values: `ikev1` and `ikev2`. Default value: `ikev2`.
	IkeVersion *string `pulumi:"ikeVersion"`
	// The identifier of the IPsec server. The value can be a fully qualified domain name (FQDN) or an IP address. The default value is the public IP address of the VPN gateway.
	LocalId *string `pulumi:"localId"`
	// The identifier of the customer gateway. The value can be an FQDN or an IP address. By default, this parameter is not specified.
	RemoteId *string `pulumi:"remoteId"`
}

type IpsecServerIkeConfigArgs added in v3.20.0 

type IpsecServerIkeConfigArgs struct {
	// The authentication algorithm that is used in Phase 1 negotiations. Default value: `sha1`.
	IkeAuthAlg pulumi.StringPtrInput `pulumi:"ikeAuthAlg"`
	// The encryption algorithm that is used in Phase 1 negotiations. Default value: `aes`.
	IkeEncAlg pulumi.StringPtrInput `pulumi:"ikeEncAlg"`
	// IkeLifetime: the SA lifetime determined by Phase 1 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.
	IkeLifetime pulumi.IntPtrInput `pulumi:"ikeLifetime"`
	// The IKE negotiation mode. Default value: `main`.
	IkeMode pulumi.StringPtrInput `pulumi:"ikeMode"`
	// The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Default value: `group2`.
	IkePfs pulumi.StringPtrInput `pulumi:"ikePfs"`
	// The IKE version. Valid values: `ikev1` and `ikev2`. Default value: `ikev2`.
	IkeVersion pulumi.StringPtrInput `pulumi:"ikeVersion"`
	// The identifier of the IPsec server. The value can be a fully qualified domain name (FQDN) or an IP address. The default value is the public IP address of the VPN gateway.
	LocalId pulumi.StringPtrInput `pulumi:"localId"`
	// The identifier of the customer gateway. The value can be an FQDN or an IP address. By default, this parameter is not specified.
	RemoteId pulumi.StringPtrInput `pulumi:"remoteId"`
}

func (IpsecServerIkeConfigArgs) ElementType added in v3.20.0 

func (IpsecServerIkeConfigArgs) ElementType() reflect.Type

func (IpsecServerIkeConfigArgs) ToIpsecServerIkeConfigOutput added in v3.20.0 

func (i IpsecServerIkeConfigArgs) ToIpsecServerIkeConfigOutput() IpsecServerIkeConfigOutput

func (IpsecServerIkeConfigArgs) ToIpsecServerIkeConfigOutputWithContext added in v3.20.0 

func (i IpsecServerIkeConfigArgs) ToIpsecServerIkeConfigOutputWithContext(ctx context.Context) IpsecServerIkeConfigOutput

type IpsecServerIkeConfigArray added in v3.20.0 

type IpsecServerIkeConfigArray []IpsecServerIkeConfigInput

func (IpsecServerIkeConfigArray) ElementType added in v3.20.0 

func (IpsecServerIkeConfigArray) ElementType() reflect.Type

func (IpsecServerIkeConfigArray) ToIpsecServerIkeConfigArrayOutput added in v3.20.0 

func (i IpsecServerIkeConfigArray) ToIpsecServerIkeConfigArrayOutput() IpsecServerIkeConfigArrayOutput

func (IpsecServerIkeConfigArray) ToIpsecServerIkeConfigArrayOutputWithContext added in v3.20.0 

func (i IpsecServerIkeConfigArray) ToIpsecServerIkeConfigArrayOutputWithContext(ctx context.Context) IpsecServerIkeConfigArrayOutput

type IpsecServerIkeConfigArrayInput added in v3.20.0 

type IpsecServerIkeConfigArrayInput interface {
	pulumi.Input

	ToIpsecServerIkeConfigArrayOutput() IpsecServerIkeConfigArrayOutput
	ToIpsecServerIkeConfigArrayOutputWithContext(context.Context) IpsecServerIkeConfigArrayOutput
}

IpsecServerIkeConfigArrayInput is an input type that accepts IpsecServerIkeConfigArray and IpsecServerIkeConfigArrayOutput values. You can construct a concrete instance of `IpsecServerIkeConfigArrayInput` via: 

IpsecServerIkeConfigArray{ IpsecServerIkeConfigArgs{...} }

type IpsecServerIkeConfigArrayOutput added in v3.20.0 

type IpsecServerIkeConfigArrayOutput struct{ *pulumi.OutputState }

func (IpsecServerIkeConfigArrayOutput) ElementType added in v3.20.0 

func (IpsecServerIkeConfigArrayOutput) ElementType() reflect.Type

func (IpsecServerIkeConfigArrayOutput) Index added in v3.20.0 

func (o IpsecServerIkeConfigArrayOutput) Index(i pulumi.IntInput) IpsecServerIkeConfigOutput

func (IpsecServerIkeConfigArrayOutput) ToIpsecServerIkeConfigArrayOutput added in v3.20.0 

func (o IpsecServerIkeConfigArrayOutput) ToIpsecServerIkeConfigArrayOutput() IpsecServerIkeConfigArrayOutput

func (IpsecServerIkeConfigArrayOutput) ToIpsecServerIkeConfigArrayOutputWithContext added in v3.20.0 

func (o IpsecServerIkeConfigArrayOutput) ToIpsecServerIkeConfigArrayOutputWithContext(ctx context.Context) IpsecServerIkeConfigArrayOutput

type IpsecServerIkeConfigInput added in v3.20.0 

type IpsecServerIkeConfigInput interface {
	pulumi.Input

	ToIpsecServerIkeConfigOutput() IpsecServerIkeConfigOutput
	ToIpsecServerIkeConfigOutputWithContext(context.Context) IpsecServerIkeConfigOutput
}

IpsecServerIkeConfigInput is an input type that accepts IpsecServerIkeConfigArgs and IpsecServerIkeConfigOutput values. You can construct a concrete instance of `IpsecServerIkeConfigInput` via: 

IpsecServerIkeConfigArgs{...}

type IpsecServerIkeConfigOutput added in v3.20.0 

type IpsecServerIkeConfigOutput struct{ *pulumi.OutputState }

func (IpsecServerIkeConfigOutput) ElementType added in v3.20.0 

func (IpsecServerIkeConfigOutput) ElementType() reflect.Type

func (IpsecServerIkeConfigOutput) IkeAuthAlg added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeAuthAlg() pulumi.StringPtrOutput

The authentication algorithm that is used in Phase 1 negotiations. Default value: `sha1`.

func (IpsecServerIkeConfigOutput) IkeEncAlg added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeEncAlg() pulumi.StringPtrOutput

The encryption algorithm that is used in Phase 1 negotiations. Default value: `aes`.

func (IpsecServerIkeConfigOutput) IkeLifetime added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeLifetime() pulumi.IntPtrOutput

IkeLifetime: the SA lifetime determined by Phase 1 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.

func (IpsecServerIkeConfigOutput) IkeMode added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeMode() pulumi.StringPtrOutput

The IKE negotiation mode. Default value: `main`.

func (IpsecServerIkeConfigOutput) IkePfs added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkePfs() pulumi.StringPtrOutput

The Diffie-Hellman key exchange algorithm that is used in Phase 1 negotiations. Default value: `group2`.

func (IpsecServerIkeConfigOutput) IkeVersion added in v3.20.0 

func (o IpsecServerIkeConfigOutput) IkeVersion() pulumi.StringPtrOutput

The IKE version. Valid values: `ikev1` and `ikev2`. Default value: `ikev2`.

func (IpsecServerIkeConfigOutput) LocalId added in v3.20.0 

func (o IpsecServerIkeConfigOutput) LocalId() pulumi.StringPtrOutput

The identifier of the IPsec server. The value can be a fully qualified domain name (FQDN) or an IP address. The default value is the public IP address of the VPN gateway.

func (IpsecServerIkeConfigOutput) RemoteId added in v3.20.0 

func (o IpsecServerIkeConfigOutput) RemoteId() pulumi.StringPtrOutput

The identifier of the customer gateway. The value can be an FQDN or an IP address. By default, this parameter is not specified.

func (IpsecServerIkeConfigOutput) ToIpsecServerIkeConfigOutput added in v3.20.0 

func (o IpsecServerIkeConfigOutput) ToIpsecServerIkeConfigOutput() IpsecServerIkeConfigOutput

func (IpsecServerIkeConfigOutput) ToIpsecServerIkeConfigOutputWithContext added in v3.20.0 

func (o IpsecServerIkeConfigOutput) ToIpsecServerIkeConfigOutputWithContext(ctx context.Context) IpsecServerIkeConfigOutput

type IpsecServerInput added in v3.20.0 

type IpsecServerInput interface {
	pulumi.Input

	ToIpsecServerOutput() IpsecServerOutput
	ToIpsecServerOutputWithContext(ctx context.Context) IpsecServerOutput
}

type IpsecServerIpsecConfig added in v3.20.0 

type IpsecServerIpsecConfig struct {
	// The authentication algorithm that is used in Phase 2 negotiations. Default value: `sha1`.
	IpsecAuthAlg *string `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm that is used in Phase 2 negotiations. Default value: `aes`.
	IpsecEncAlg *string `pulumi:"ipsecEncAlg"`
	// The SA lifetime determined by Phase 2 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.
	IpsecLifetime *int `pulumi:"ipsecLifetime"`
	// Forwards packets of all protocols. The Diffie-Hellman key exchange algorithm used in Phase 2 negotiations. Default value: `group2`.
	IpsecPfs *string `pulumi:"ipsecPfs"`
}

type IpsecServerIpsecConfigArgs added in v3.20.0 

type IpsecServerIpsecConfigArgs struct {
	// The authentication algorithm that is used in Phase 2 negotiations. Default value: `sha1`.
	IpsecAuthAlg pulumi.StringPtrInput `pulumi:"ipsecAuthAlg"`
	// The encryption algorithm that is used in Phase 2 negotiations. Default value: `aes`.
	IpsecEncAlg pulumi.StringPtrInput `pulumi:"ipsecEncAlg"`
	// The SA lifetime determined by Phase 2 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.
	IpsecLifetime pulumi.IntPtrInput `pulumi:"ipsecLifetime"`
	// Forwards packets of all protocols. The Diffie-Hellman key exchange algorithm used in Phase 2 negotiations. Default value: `group2`.
	IpsecPfs pulumi.StringPtrInput `pulumi:"ipsecPfs"`
}

func (IpsecServerIpsecConfigArgs) ElementType added in v3.20.0 

func (IpsecServerIpsecConfigArgs) ElementType() reflect.Type

func (IpsecServerIpsecConfigArgs) ToIpsecServerIpsecConfigOutput added in v3.20.0 

func (i IpsecServerIpsecConfigArgs) ToIpsecServerIpsecConfigOutput() IpsecServerIpsecConfigOutput

func (IpsecServerIpsecConfigArgs) ToIpsecServerIpsecConfigOutputWithContext added in v3.20.0 

func (i IpsecServerIpsecConfigArgs) ToIpsecServerIpsecConfigOutputWithContext(ctx context.Context) IpsecServerIpsecConfigOutput

type IpsecServerIpsecConfigArray added in v3.20.0 

type IpsecServerIpsecConfigArray []IpsecServerIpsecConfigInput

func (IpsecServerIpsecConfigArray) ElementType added in v3.20.0 

func (IpsecServerIpsecConfigArray) ElementType() reflect.Type

func (IpsecServerIpsecConfigArray) ToIpsecServerIpsecConfigArrayOutput added in v3.20.0 

func (i IpsecServerIpsecConfigArray) ToIpsecServerIpsecConfigArrayOutput() IpsecServerIpsecConfigArrayOutput

func (IpsecServerIpsecConfigArray) ToIpsecServerIpsecConfigArrayOutputWithContext added in v3.20.0 

func (i IpsecServerIpsecConfigArray) ToIpsecServerIpsecConfigArrayOutputWithContext(ctx context.Context) IpsecServerIpsecConfigArrayOutput

type IpsecServerIpsecConfigArrayInput added in v3.20.0 

type IpsecServerIpsecConfigArrayInput interface {
	pulumi.Input

	ToIpsecServerIpsecConfigArrayOutput() IpsecServerIpsecConfigArrayOutput
	ToIpsecServerIpsecConfigArrayOutputWithContext(context.Context) IpsecServerIpsecConfigArrayOutput
}

IpsecServerIpsecConfigArrayInput is an input type that accepts IpsecServerIpsecConfigArray and IpsecServerIpsecConfigArrayOutput values. You can construct a concrete instance of `IpsecServerIpsecConfigArrayInput` via: 

IpsecServerIpsecConfigArray{ IpsecServerIpsecConfigArgs{...} }

type IpsecServerIpsecConfigArrayOutput added in v3.20.0 

type IpsecServerIpsecConfigArrayOutput struct{ *pulumi.OutputState }

func (IpsecServerIpsecConfigArrayOutput) ElementType added in v3.20.0 

func (IpsecServerIpsecConfigArrayOutput) ElementType() reflect.Type

func (IpsecServerIpsecConfigArrayOutput) Index added in v3.20.0 

func (o IpsecServerIpsecConfigArrayOutput) Index(i pulumi.IntInput) IpsecServerIpsecConfigOutput

func (IpsecServerIpsecConfigArrayOutput) ToIpsecServerIpsecConfigArrayOutput added in v3.20.0 

func (o IpsecServerIpsecConfigArrayOutput) ToIpsecServerIpsecConfigArrayOutput() IpsecServerIpsecConfigArrayOutput

func (IpsecServerIpsecConfigArrayOutput) ToIpsecServerIpsecConfigArrayOutputWithContext added in v3.20.0 

func (o IpsecServerIpsecConfigArrayOutput) ToIpsecServerIpsecConfigArrayOutputWithContext(ctx context.Context) IpsecServerIpsecConfigArrayOutput

type IpsecServerIpsecConfigInput added in v3.20.0 

type IpsecServerIpsecConfigInput interface {
	pulumi.Input

	ToIpsecServerIpsecConfigOutput() IpsecServerIpsecConfigOutput
	ToIpsecServerIpsecConfigOutputWithContext(context.Context) IpsecServerIpsecConfigOutput
}

IpsecServerIpsecConfigInput is an input type that accepts IpsecServerIpsecConfigArgs and IpsecServerIpsecConfigOutput values. You can construct a concrete instance of `IpsecServerIpsecConfigInput` via: 

IpsecServerIpsecConfigArgs{...}

type IpsecServerIpsecConfigOutput added in v3.20.0 

type IpsecServerIpsecConfigOutput struct{ *pulumi.OutputState }

func (IpsecServerIpsecConfigOutput) ElementType added in v3.20.0 

func (IpsecServerIpsecConfigOutput) ElementType() reflect.Type

func (IpsecServerIpsecConfigOutput) IpsecAuthAlg added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) IpsecAuthAlg() pulumi.StringPtrOutput

The authentication algorithm that is used in Phase 2 negotiations. Default value: `sha1`.

func (IpsecServerIpsecConfigOutput) IpsecEncAlg added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) IpsecEncAlg() pulumi.StringPtrOutput

The encryption algorithm that is used in Phase 2 negotiations. Default value: `aes`.

func (IpsecServerIpsecConfigOutput) IpsecLifetime added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) IpsecLifetime() pulumi.IntPtrOutput

The SA lifetime determined by Phase 2 negotiations. Valid values: `0` to `86400`. Default value: `86400`. Unit: `seconds`.

func (IpsecServerIpsecConfigOutput) IpsecPfs added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) IpsecPfs() pulumi.StringPtrOutput

Forwards packets of all protocols. The Diffie-Hellman key exchange algorithm used in Phase 2 negotiations. Default value: `group2`.

func (IpsecServerIpsecConfigOutput) ToIpsecServerIpsecConfigOutput added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) ToIpsecServerIpsecConfigOutput() IpsecServerIpsecConfigOutput

func (IpsecServerIpsecConfigOutput) ToIpsecServerIpsecConfigOutputWithContext added in v3.20.0 

func (o IpsecServerIpsecConfigOutput) ToIpsecServerIpsecConfigOutputWithContext(ctx context.Context) IpsecServerIpsecConfigOutput

type IpsecServerMap added in v3.20.0 

type IpsecServerMap map[string]IpsecServerInput

func (IpsecServerMap) ElementType added in v3.20.0 

func (IpsecServerMap) ElementType() reflect.Type

func (IpsecServerMap) ToIpsecServerMapOutput added in v3.20.0 

func (i IpsecServerMap) ToIpsecServerMapOutput() IpsecServerMapOutput

func (IpsecServerMap) ToIpsecServerMapOutputWithContext added in v3.20.0 

func (i IpsecServerMap) ToIpsecServerMapOutputWithContext(ctx context.Context) IpsecServerMapOutput

type IpsecServerMapInput added in v3.20.0 

type IpsecServerMapInput interface {
	pulumi.Input

	ToIpsecServerMapOutput() IpsecServerMapOutput
	ToIpsecServerMapOutputWithContext(context.Context) IpsecServerMapOutput
}

IpsecServerMapInput is an input type that accepts IpsecServerMap and IpsecServerMapOutput values. You can construct a concrete instance of `IpsecServerMapInput` via: 

IpsecServerMap{ "key": IpsecServerArgs{...} }

type IpsecServerMapOutput added in v3.20.0 

type IpsecServerMapOutput struct{ *pulumi.OutputState }

func (IpsecServerMapOutput) ElementType added in v3.20.0 

func (IpsecServerMapOutput) ElementType() reflect.Type

func (IpsecServerMapOutput) MapIndex added in v3.20.0 

func (o IpsecServerMapOutput) MapIndex(k pulumi.StringInput) IpsecServerOutput

func (IpsecServerMapOutput) ToIpsecServerMapOutput added in v3.20.0 

func (o IpsecServerMapOutput) ToIpsecServerMapOutput() IpsecServerMapOutput

func (IpsecServerMapOutput) ToIpsecServerMapOutputWithContext added in v3.20.0 

func (o IpsecServerMapOutput) ToIpsecServerMapOutputWithContext(ctx context.Context) IpsecServerMapOutput

type IpsecServerOutput added in v3.20.0 

type IpsecServerOutput struct{ *pulumi.OutputState }

func (IpsecServerOutput) ClientIpPool added in v3.27.0 

func (o IpsecServerOutput) ClientIpPool() pulumi.StringOutput

The client CIDR block. It refers to the CIDR block that is allocated to the virtual interface of the client.

func (IpsecServerOutput) DryRun added in v3.27.0 

func (o IpsecServerOutput) DryRun() pulumi.BoolPtrOutput

The dry run.

func (IpsecServerOutput) EffectImmediately added in v3.27.0 

func (o IpsecServerOutput) EffectImmediately() pulumi.BoolPtrOutput

Specifies whether you want the configuration to immediately take effect.

func (IpsecServerOutput) ElementType added in v3.20.0 

func (IpsecServerOutput) ElementType() reflect.Type

func (IpsecServerOutput) IkeConfigs added in v3.27.0 

func (o IpsecServerOutput) IkeConfigs() IpsecServerIkeConfigArrayOutput

The configuration of Phase 1 negotiations. See `ikeConfig` below.

func (IpsecServerOutput) IpsecConfigs added in v3.27.0 

func (o IpsecServerOutput) IpsecConfigs() IpsecServerIpsecConfigArrayOutput

The configuration of Phase 2 negotiations. See `ipsecConfig` below.

func (IpsecServerOutput) IpsecServerName added in v3.27.0 

func (o IpsecServerOutput) IpsecServerName() pulumi.StringPtrOutput

The name of the IPsec server. The name must be `2` to `128` characters in length, and can contain digits, hyphens (-), and underscores (_). It must start with a letter.

func (IpsecServerOutput) LocalSubnet added in v3.27.0 

func (o IpsecServerOutput) LocalSubnet() pulumi.StringOutput

The local CIDR block. It refers to the CIDR block of the virtual private cloud (VPC) that is used to connect with the client. Separate multiple CIDR blocks with commas (,). Example: `192.168.1.0/24,192.168.2.0/24`.

func (IpsecServerOutput) Psk added in v3.27.0 

func (o IpsecServerOutput) Psk() pulumi.StringOutput

The pre-shared key. The pre-shared key is used to authenticate the VPN gateway and the client. By default, the system generates a random string that is 16 bits in length. You can also specify the pre-shared key. It can contain at most 100 characters.

func (IpsecServerOutput) PskEnabled added in v3.27.0 

func (o IpsecServerOutput) PskEnabled() pulumi.BoolPtrOutput

Whether to enable the pre-shared key authentication method. The value is only `true`, which indicates that the pre-shared key authentication method is enabled.

func (IpsecServerOutput) ToIpsecServerOutput added in v3.20.0 

func (o IpsecServerOutput) ToIpsecServerOutput() IpsecServerOutput

func (IpsecServerOutput) ToIpsecServerOutputWithContext added in v3.20.0 

func (o IpsecServerOutput) ToIpsecServerOutputWithContext(ctx context.Context) IpsecServerOutput

func (IpsecServerOutput) VpnGatewayId added in v3.27.0 

func (o IpsecServerOutput) VpnGatewayId() pulumi.StringOutput

The ID of the VPN gateway.

type IpsecServerState added in v3.20.0 

type IpsecServerState struct {
	// The client CIDR block. It refers to the CIDR block that is allocated to the virtual interface of the client.
	ClientIpPool pulumi.StringPtrInput
	// The dry run.
	DryRun pulumi.BoolPtrInput
	// Specifies whether you want the configuration to immediately take effect.
	EffectImmediately pulumi.BoolPtrInput
	// The configuration of Phase 1 negotiations. See `ikeConfig` below.
	IkeConfigs IpsecServerIkeConfigArrayInput
	// The configuration of Phase 2 negotiations. See `ipsecConfig` below.
	IpsecConfigs IpsecServerIpsecConfigArrayInput
	// The name of the IPsec server. The name must be `2` to `128` characters in length, and can contain digits, hyphens (-), and underscores (_). It must start with a letter.
	IpsecServerName pulumi.StringPtrInput
	// The local CIDR block. It refers to the CIDR block of the virtual private cloud (VPC) that is used to connect with the client. Separate multiple CIDR blocks with commas (,). Example: `192.168.1.0/24,192.168.2.0/24`.
	LocalSubnet pulumi.StringPtrInput
	// The pre-shared key. The pre-shared key is used to authenticate the VPN gateway and the client. By default, the system generates a random string that is 16 bits in length. You can also specify the pre-shared key. It can contain at most 100 characters.
	Psk pulumi.StringPtrInput
	// Whether to enable the pre-shared key authentication method. The value is only `true`, which indicates that the pre-shared key authentication method is enabled.
	PskEnabled pulumi.BoolPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringPtrInput
}

func (IpsecServerState) ElementType added in v3.20.0 

func (IpsecServerState) ElementType() reflect.Type

type PbrRouteEntry added in v3.20.0 

type PbrRouteEntry struct {
	pulumi.CustomResourceState

	// The next hop of the policy-based route.
	NextHop pulumi.StringOutput `pulumi:"nextHop"`
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolOutput `pulumi:"publishVpc"`
	// The destination CIDR block of the policy-based route.
	RouteDest pulumi.StringOutput `pulumi:"routeDest"`
	// The source CIDR block of the policy-based route.
	RouteSource pulumi.StringOutput `pulumi:"routeSource"`
	// The status of the vpn pbr route entry.
	Status pulumi.StringOutput `pulumi:"status"`
	// The ID of the vpn gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
	// The weight of the policy-based route. Valid values: 0 and 100.
	Weight pulumi.IntOutput `pulumi:"weight"`
}

Provides a VPN Pbr Route Entry resource.

> **NOTE:** Available since v1.162.0+.

For information about VPN Pbr Route Entry and how to use it, see [What is VPN Pbr Route Entry](https://www.alibabacloud.com/help/en/doc-detail/127248.html).

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		name := "tfacc"
		if param := cfg.Get("name"); param != "" {
			name = param
		}
		_default, err := vpn.GetGateways(ctx, nil, nil)
		if err != nil {
			return err
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "default", &vpn.CustomerGatewayArgs{
			Name:      pulumi.String(name),
			IpAddress: pulumi.String("192.168.1.1"),
		})
		if err != nil {
			return err
		}
		defaultConnection, err := vpn.NewConnection(ctx, "default", &vpn.ConnectionArgs{
			Name:              pulumi.String(name),
			CustomerGatewayId: defaultCustomerGateway.ID(),
			VpnGatewayId:      pulumi.String(_default.Ids[0]),
			LocalSubnets: pulumi.StringArray{
				pulumi.String("192.168.2.0/24"),
			},
			RemoteSubnets: pulumi.StringArray{
				pulumi.String("192.168.3.0/24"),
			},
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewPbrRouteEntry(ctx, "default", &vpn.PbrRouteEntryArgs{
			VpnGatewayId: pulumi.String(_default.Ids[0]),
			RouteSource:  pulumi.String("192.168.1.0/24"),
			RouteDest:    pulumi.String("10.0.0.0/24"),
			NextHop:      defaultConnection.ID(),
			Weight:       pulumi.Int(0),
			PublishVpc:   pulumi.Bool(false),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN Pbr route entry can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/pbrRouteEntry:PbrRouteEntry example <vpn_gateway_id>:<next_hop>:<route_source>:<route_dest> ```

func GetPbrRouteEntry added in v3.20.0 

func GetPbrRouteEntry(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *PbrRouteEntryState, opts ...pulumi.ResourceOption) (*PbrRouteEntry, error)

GetPbrRouteEntry gets an existing PbrRouteEntry resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewPbrRouteEntry added in v3.20.0 

func NewPbrRouteEntry(ctx *pulumi.Context,
	name string, args *PbrRouteEntryArgs, opts ...pulumi.ResourceOption) (*PbrRouteEntry, error)

NewPbrRouteEntry registers a new resource with the given unique name, arguments, and options.

func (*PbrRouteEntry) ElementType added in v3.20.0 

func (*PbrRouteEntry) ElementType() reflect.Type

func (*PbrRouteEntry) ToPbrRouteEntryOutput added in v3.20.0 

func (i *PbrRouteEntry) ToPbrRouteEntryOutput() PbrRouteEntryOutput

func (*PbrRouteEntry) ToPbrRouteEntryOutputWithContext added in v3.20.0 

func (i *PbrRouteEntry) ToPbrRouteEntryOutputWithContext(ctx context.Context) PbrRouteEntryOutput

type PbrRouteEntryArgs added in v3.20.0 

type PbrRouteEntryArgs struct {
	// The next hop of the policy-based route.
	NextHop pulumi.StringInput
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolInput
	// The destination CIDR block of the policy-based route.
	RouteDest pulumi.StringInput
	// The source CIDR block of the policy-based route.
	RouteSource pulumi.StringInput
	// The ID of the vpn gateway.
	VpnGatewayId pulumi.StringInput
	// The weight of the policy-based route. Valid values: 0 and 100.
	Weight pulumi.IntInput
}

The set of arguments for constructing a PbrRouteEntry resource.

func (PbrRouteEntryArgs) ElementType added in v3.20.0 

func (PbrRouteEntryArgs) ElementType() reflect.Type

type PbrRouteEntryArray added in v3.20.0 

type PbrRouteEntryArray []PbrRouteEntryInput

func (PbrRouteEntryArray) ElementType added in v3.20.0 

func (PbrRouteEntryArray) ElementType() reflect.Type

func (PbrRouteEntryArray) ToPbrRouteEntryArrayOutput added in v3.20.0 

func (i PbrRouteEntryArray) ToPbrRouteEntryArrayOutput() PbrRouteEntryArrayOutput

func (PbrRouteEntryArray) ToPbrRouteEntryArrayOutputWithContext added in v3.20.0 

func (i PbrRouteEntryArray) ToPbrRouteEntryArrayOutputWithContext(ctx context.Context) PbrRouteEntryArrayOutput

type PbrRouteEntryArrayInput added in v3.20.0 

type PbrRouteEntryArrayInput interface {
	pulumi.Input

	ToPbrRouteEntryArrayOutput() PbrRouteEntryArrayOutput
	ToPbrRouteEntryArrayOutputWithContext(context.Context) PbrRouteEntryArrayOutput
}

PbrRouteEntryArrayInput is an input type that accepts PbrRouteEntryArray and PbrRouteEntryArrayOutput values. You can construct a concrete instance of `PbrRouteEntryArrayInput` via: 

PbrRouteEntryArray{ PbrRouteEntryArgs{...} }

type PbrRouteEntryArrayOutput added in v3.20.0 

type PbrRouteEntryArrayOutput struct{ *pulumi.OutputState }

func (PbrRouteEntryArrayOutput) ElementType added in v3.20.0 

func (PbrRouteEntryArrayOutput) ElementType() reflect.Type

func (PbrRouteEntryArrayOutput) Index added in v3.20.0 

func (o PbrRouteEntryArrayOutput) Index(i pulumi.IntInput) PbrRouteEntryOutput

func (PbrRouteEntryArrayOutput) ToPbrRouteEntryArrayOutput added in v3.20.0 

func (o PbrRouteEntryArrayOutput) ToPbrRouteEntryArrayOutput() PbrRouteEntryArrayOutput

func (PbrRouteEntryArrayOutput) ToPbrRouteEntryArrayOutputWithContext added in v3.20.0 

func (o PbrRouteEntryArrayOutput) ToPbrRouteEntryArrayOutputWithContext(ctx context.Context) PbrRouteEntryArrayOutput

type PbrRouteEntryInput added in v3.20.0 

type PbrRouteEntryInput interface {
	pulumi.Input

	ToPbrRouteEntryOutput() PbrRouteEntryOutput
	ToPbrRouteEntryOutputWithContext(ctx context.Context) PbrRouteEntryOutput
}

type PbrRouteEntryMap added in v3.20.0 

type PbrRouteEntryMap map[string]PbrRouteEntryInput

func (PbrRouteEntryMap) ElementType added in v3.20.0 

func (PbrRouteEntryMap) ElementType() reflect.Type

func (PbrRouteEntryMap) ToPbrRouteEntryMapOutput added in v3.20.0 

func (i PbrRouteEntryMap) ToPbrRouteEntryMapOutput() PbrRouteEntryMapOutput

func (PbrRouteEntryMap) ToPbrRouteEntryMapOutputWithContext added in v3.20.0 

func (i PbrRouteEntryMap) ToPbrRouteEntryMapOutputWithContext(ctx context.Context) PbrRouteEntryMapOutput

type PbrRouteEntryMapInput added in v3.20.0 

type PbrRouteEntryMapInput interface {
	pulumi.Input

	ToPbrRouteEntryMapOutput() PbrRouteEntryMapOutput
	ToPbrRouteEntryMapOutputWithContext(context.Context) PbrRouteEntryMapOutput
}

PbrRouteEntryMapInput is an input type that accepts PbrRouteEntryMap and PbrRouteEntryMapOutput values. You can construct a concrete instance of `PbrRouteEntryMapInput` via: 

PbrRouteEntryMap{ "key": PbrRouteEntryArgs{...} }

type PbrRouteEntryMapOutput added in v3.20.0 

type PbrRouteEntryMapOutput struct{ *pulumi.OutputState }

func (PbrRouteEntryMapOutput) ElementType added in v3.20.0 

func (PbrRouteEntryMapOutput) ElementType() reflect.Type

func (PbrRouteEntryMapOutput) MapIndex added in v3.20.0 

func (o PbrRouteEntryMapOutput) MapIndex(k pulumi.StringInput) PbrRouteEntryOutput

func (PbrRouteEntryMapOutput) ToPbrRouteEntryMapOutput added in v3.20.0 

func (o PbrRouteEntryMapOutput) ToPbrRouteEntryMapOutput() PbrRouteEntryMapOutput

func (PbrRouteEntryMapOutput) ToPbrRouteEntryMapOutputWithContext added in v3.20.0 

func (o PbrRouteEntryMapOutput) ToPbrRouteEntryMapOutputWithContext(ctx context.Context) PbrRouteEntryMapOutput

type PbrRouteEntryOutput added in v3.20.0 

type PbrRouteEntryOutput struct{ *pulumi.OutputState }

func (PbrRouteEntryOutput) ElementType added in v3.20.0 

func (PbrRouteEntryOutput) ElementType() reflect.Type

func (PbrRouteEntryOutput) NextHop added in v3.27.0 

func (o PbrRouteEntryOutput) NextHop() pulumi.StringOutput

The next hop of the policy-based route.

func (PbrRouteEntryOutput) PublishVpc added in v3.27.0 

func (o PbrRouteEntryOutput) PublishVpc() pulumi.BoolOutput

Whether to issue the destination route to the VPC.

func (PbrRouteEntryOutput) RouteDest added in v3.27.0 

func (o PbrRouteEntryOutput) RouteDest() pulumi.StringOutput

The destination CIDR block of the policy-based route.

func (PbrRouteEntryOutput) RouteSource added in v3.27.0 

func (o PbrRouteEntryOutput) RouteSource() pulumi.StringOutput

The source CIDR block of the policy-based route.

func (PbrRouteEntryOutput) Status added in v3.27.0 

func (o PbrRouteEntryOutput) Status() pulumi.StringOutput

The status of the vpn pbr route entry.

func (PbrRouteEntryOutput) ToPbrRouteEntryOutput added in v3.20.0 

func (o PbrRouteEntryOutput) ToPbrRouteEntryOutput() PbrRouteEntryOutput

func (PbrRouteEntryOutput) ToPbrRouteEntryOutputWithContext added in v3.20.0 

func (o PbrRouteEntryOutput) ToPbrRouteEntryOutputWithContext(ctx context.Context) PbrRouteEntryOutput

func (PbrRouteEntryOutput) VpnGatewayId added in v3.27.0 

func (o PbrRouteEntryOutput) VpnGatewayId() pulumi.StringOutput

The ID of the vpn gateway.

func (PbrRouteEntryOutput) Weight added in v3.27.0 

func (o PbrRouteEntryOutput) Weight() pulumi.IntOutput

The weight of the policy-based route. Valid values: 0 and 100.

type PbrRouteEntryState added in v3.20.0 

type PbrRouteEntryState struct {
	// The next hop of the policy-based route.
	NextHop pulumi.StringPtrInput
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolPtrInput
	// The destination CIDR block of the policy-based route.
	RouteDest pulumi.StringPtrInput
	// The source CIDR block of the policy-based route.
	RouteSource pulumi.StringPtrInput
	// The status of the vpn pbr route entry.
	Status pulumi.StringPtrInput
	// The ID of the vpn gateway.
	VpnGatewayId pulumi.StringPtrInput
	// The weight of the policy-based route. Valid values: 0 and 100.
	Weight pulumi.IntPtrInput
}

func (PbrRouteEntryState) ElementType added in v3.20.0 

func (PbrRouteEntryState) ElementType() reflect.Type

type RouteEntry 

type RouteEntry struct {
	pulumi.CustomResourceState

	// The next hop of the destination route.
	NextHop pulumi.StringOutput `pulumi:"nextHop"`
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolOutput `pulumi:"publishVpc"`
	// The destination network segment of the destination route.
	RouteDest pulumi.StringOutput `pulumi:"routeDest"`
	// (Available in 1.161.0+) The type of the vpn route entry.
	RouteEntryType pulumi.StringOutput `pulumi:"routeEntryType"`
	// (Available in 1.161.0+) The status of the vpn route entry.
	Status pulumi.StringOutput `pulumi:"status"`
	// The id of the vpn gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
	// The value should be 0 or 100.
	Weight pulumi.IntOutput `pulumi:"weight"`
}

## Example Usage

Basic Usage

```go package main

import ( 

"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpc"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpn"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"

) 

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		name := "tf-example"
		if param := cfg.Get("name"); param != "" {
			name = param
		}
		_default, err := alicloud.GetZones(ctx, &alicloud.GetZonesArgs{
			AvailableDiskCategory:     pulumi.StringRef("cloud_efficiency"),
			AvailableResourceCreation: pulumi.StringRef("VSwitch"),
		}, nil)
		if err != nil {
			return err
		}
		defaultGetNetworks, err := vpc.GetNetworks(ctx, &vpc.GetNetworksArgs{
			NameRegex: pulumi.StringRef("^default-NODELETING$"),
		}, nil)
		if err != nil {
			return err
		}
		defaultGetSwitches, err := vpc.GetSwitches(ctx, &vpc.GetSwitchesArgs{
			VpcId:  pulumi.StringRef(defaultGetNetworks.Ids[0]),
			ZoneId: pulumi.StringRef(_default.Ids[0]),
		}, nil)
		if err != nil {
			return err
		}
		defaultGateway, err := vpn.NewGateway(ctx, "default", &vpn.GatewayArgs{
			Name:               pulumi.String("terraform-example"),
			VpcId:              pulumi.String(defaultGetNetworks.Ids[0]),
			Bandwidth:          pulumi.Int(10),
			InstanceChargeType: pulumi.String("PrePaid"),
			EnableSsl:          pulumi.Bool(false),
			VswitchId:          pulumi.String(defaultGetSwitches.Ids[0]),
		})
		if err != nil {
			return err
		}
		defaultCustomerGateway, err := vpn.NewCustomerGateway(ctx, "default", &vpn.CustomerGatewayArgs{
			Name:      pulumi.String(name),
			IpAddress: pulumi.String("192.168.1.1"),
		})
		if err != nil {
			return err
		}
		defaultConnection, err := vpn.NewConnection(ctx, "default", &vpn.ConnectionArgs{
			Name:              pulumi.String(name),
			CustomerGatewayId: defaultCustomerGateway.ID(),
			VpnGatewayId:      defaultGateway.ID(),
			LocalSubnets: pulumi.StringArray{
				pulumi.String("192.168.2.0/24"),
			},
			RemoteSubnets: pulumi.StringArray{
				pulumi.String("192.168.3.0/24"),
			},
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewRouteEntry(ctx, "default", &vpn.RouteEntryArgs{
			VpnGatewayId: defaultGateway.ID(),
			RouteDest:    pulumi.String("10.0.0.0/24"),
			NextHop:      defaultConnection.ID(),
			Weight:       pulumi.Int(0),
			PublishVpc:   pulumi.Bool(false),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

```

## Import

VPN route entry can be imported using the id(VpnGatewayId +":"+ NextHop +":"+ RouteDest), e.g.

```sh $ pulumi import alicloud:vpn/routeEntry:RouteEntry example vpn-abc123456:vco-abc123456:10.0.0.10/24 ```

func GetRouteEntry 

func GetRouteEntry(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *RouteEntryState, opts ...pulumi.ResourceOption) (*RouteEntry, error)

GetRouteEntry gets an existing RouteEntry resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewRouteEntry 

func NewRouteEntry(ctx *pulumi.Context,
	name string, args *RouteEntryArgs, opts ...pulumi.ResourceOption) (*RouteEntry, error)

NewRouteEntry registers a new resource with the given unique name, arguments, and options.

func (*RouteEntry) ElementType 

func (*RouteEntry) ElementType() reflect.Type

func (*RouteEntry) ToRouteEntryOutput 

func (i *RouteEntry) ToRouteEntryOutput() RouteEntryOutput

func (*RouteEntry) ToRouteEntryOutputWithContext 

func (i *RouteEntry) ToRouteEntryOutputWithContext(ctx context.Context) RouteEntryOutput

type RouteEntryArgs 

type RouteEntryArgs struct {
	// The next hop of the destination route.
	NextHop pulumi.StringInput
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolInput
	// The destination network segment of the destination route.
	RouteDest pulumi.StringInput
	// The id of the vpn gateway.
	VpnGatewayId pulumi.StringInput
	// The value should be 0 or 100.
	Weight pulumi.IntInput
}

The set of arguments for constructing a RouteEntry resource.

func (RouteEntryArgs) ElementType 

func (RouteEntryArgs) ElementType() reflect.Type

type RouteEntryArray 

type RouteEntryArray []RouteEntryInput

func (RouteEntryArray) ElementType 

func (RouteEntryArray) ElementType() reflect.Type

func (RouteEntryArray) ToRouteEntryArrayOutput 

func (i RouteEntryArray) ToRouteEntryArrayOutput() RouteEntryArrayOutput

func (RouteEntryArray) ToRouteEntryArrayOutputWithContext 

func (i RouteEntryArray) ToRouteEntryArrayOutputWithContext(ctx context.Context) RouteEntryArrayOutput

type RouteEntryArrayInput 

type RouteEntryArrayInput interface {
	pulumi.Input

	ToRouteEntryArrayOutput() RouteEntryArrayOutput
	ToRouteEntryArrayOutputWithContext(context.Context) RouteEntryArrayOutput
}

RouteEntryArrayInput is an input type that accepts RouteEntryArray and RouteEntryArrayOutput values. You can construct a concrete instance of `RouteEntryArrayInput` via: 

RouteEntryArray{ RouteEntryArgs{...} }

type RouteEntryArrayOutput 

type RouteEntryArrayOutput struct{ *pulumi.OutputState }

func (RouteEntryArrayOutput) ElementType 

func (RouteEntryArrayOutput) ElementType() reflect.Type

func (RouteEntryArrayOutput) Index 

func (o RouteEntryArrayOutput) Index(i pulumi.IntInput) RouteEntryOutput

func (RouteEntryArrayOutput) ToRouteEntryArrayOutput 

func (o RouteEntryArrayOutput) ToRouteEntryArrayOutput() RouteEntryArrayOutput

func (RouteEntryArrayOutput) ToRouteEntryArrayOutputWithContext 

func (o RouteEntryArrayOutput) ToRouteEntryArrayOutputWithContext(ctx context.Context) RouteEntryArrayOutput

type RouteEntryInput 

type RouteEntryInput interface {
	pulumi.Input

	ToRouteEntryOutput() RouteEntryOutput
	ToRouteEntryOutputWithContext(ctx context.Context) RouteEntryOutput
}

type RouteEntryMap 

type RouteEntryMap map[string]RouteEntryInput

func (RouteEntryMap) ElementType 

func (RouteEntryMap) ElementType() reflect.Type

func (RouteEntryMap) ToRouteEntryMapOutput 

func (i RouteEntryMap) ToRouteEntryMapOutput() RouteEntryMapOutput

func (RouteEntryMap) ToRouteEntryMapOutputWithContext 

func (i RouteEntryMap) ToRouteEntryMapOutputWithContext(ctx context.Context) RouteEntryMapOutput

type RouteEntryMapInput 

type RouteEntryMapInput interface {
	pulumi.Input

	ToRouteEntryMapOutput() RouteEntryMapOutput
	ToRouteEntryMapOutputWithContext(context.Context) RouteEntryMapOutput
}

RouteEntryMapInput is an input type that accepts RouteEntryMap and RouteEntryMapOutput values. You can construct a concrete instance of `RouteEntryMapInput` via: 

RouteEntryMap{ "key": RouteEntryArgs{...} }

type RouteEntryMapOutput 

type RouteEntryMapOutput struct{ *pulumi.OutputState }

func (RouteEntryMapOutput) ElementType 

func (RouteEntryMapOutput) ElementType() reflect.Type

func (RouteEntryMapOutput) MapIndex 

func (o RouteEntryMapOutput) MapIndex(k pulumi.StringInput) RouteEntryOutput

func (RouteEntryMapOutput) ToRouteEntryMapOutput 

func (o RouteEntryMapOutput) ToRouteEntryMapOutput() RouteEntryMapOutput

func (RouteEntryMapOutput) ToRouteEntryMapOutputWithContext 

func (o RouteEntryMapOutput) ToRouteEntryMapOutputWithContext(ctx context.Context) RouteEntryMapOutput

type RouteEntryOutput 

type RouteEntryOutput struct{ *pulumi.OutputState }

func (RouteEntryOutput) ElementType 

func (RouteEntryOutput) ElementType() reflect.Type

func (RouteEntryOutput) NextHop added in v3.27.0 

func (o RouteEntryOutput) NextHop() pulumi.StringOutput

The next hop of the destination route.

func (RouteEntryOutput) PublishVpc added in v3.27.0 

func (o RouteEntryOutput) PublishVpc() pulumi.BoolOutput

Whether to issue the destination route to the VPC.

func (RouteEntryOutput) RouteDest added in v3.27.0 

func (o RouteEntryOutput) RouteDest() pulumi.StringOutput

The destination network segment of the destination route.

func (RouteEntryOutput) RouteEntryType added in v3.27.0 

func (o RouteEntryOutput) RouteEntryType() pulumi.StringOutput

(Available in 1.161.0+) The type of the vpn route entry.

func (RouteEntryOutput) Status added in v3.27.0 

func (o RouteEntryOutput) Status() pulumi.StringOutput

(Available in 1.161.0+) The status of the vpn route entry.

func (RouteEntryOutput) ToRouteEntryOutput 

func (o RouteEntryOutput) ToRouteEntryOutput() RouteEntryOutput

func (RouteEntryOutput) ToRouteEntryOutputWithContext 

func (o RouteEntryOutput) ToRouteEntryOutputWithContext(ctx context.Context) RouteEntryOutput

func (RouteEntryOutput) VpnGatewayId added in v3.27.0 

func (o RouteEntryOutput) VpnGatewayId() pulumi.StringOutput

The id of the vpn gateway.

func (RouteEntryOutput) Weight added in v3.27.0 

func (o RouteEntryOutput) Weight() pulumi.IntOutput

The value should be 0 or 100.

type RouteEntryState 

type RouteEntryState struct {
	// The next hop of the destination route.
	NextHop pulumi.StringPtrInput
	// Whether to issue the destination route to the VPC.
	PublishVpc pulumi.BoolPtrInput
	// The destination network segment of the destination route.
	RouteDest pulumi.StringPtrInput
	// (Available in 1.161.0+) The type of the vpn route entry.
	RouteEntryType pulumi.StringPtrInput
	// (Available in 1.161.0+) The status of the vpn route entry.
	Status pulumi.StringPtrInput
	// The id of the vpn gateway.
	VpnGatewayId pulumi.StringPtrInput
	// The value should be 0 or 100.
	Weight pulumi.IntPtrInput
}

func (RouteEntryState) ElementType 

func (RouteEntryState) ElementType() reflect.Type

type SslVpnClientCert 

type SslVpnClientCert struct {
	pulumi.CustomResourceState

	// The client ca cert.
	CaCert pulumi.StringOutput `pulumi:"caCert"`
	// The client cert.
	ClientCert pulumi.StringOutput `pulumi:"clientCert"`
	// The vpn client config.
	ClientConfig pulumi.StringOutput `pulumi:"clientConfig"`
	// The client key.
	ClientKey pulumi.StringOutput `pulumi:"clientKey"`
	// The name of the client certificate.
	Name pulumi.StringOutput `pulumi:"name"`
	// The ID of the SSL-VPN server.
	SslVpnServerId pulumi.StringOutput `pulumi:"sslVpnServerId"`
	// The status of the client certificate.
	Status pulumi.StringOutput `pulumi:"status"`
}

## Example Usage

Basic Usage

## Import

SSL-VPN client certificates can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/sslVpnClientCert:SslVpnClientCert example vsc-abc123456 ```

func GetSslVpnClientCert 

func GetSslVpnClientCert(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *SslVpnClientCertState, opts ...pulumi.ResourceOption) (*SslVpnClientCert, error)

GetSslVpnClientCert gets an existing SslVpnClientCert resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewSslVpnClientCert 

func NewSslVpnClientCert(ctx *pulumi.Context,
	name string, args *SslVpnClientCertArgs, opts ...pulumi.ResourceOption) (*SslVpnClientCert, error)

NewSslVpnClientCert registers a new resource with the given unique name, arguments, and options.

func (*SslVpnClientCert) ElementType 

func (*SslVpnClientCert) ElementType() reflect.Type

func (*SslVpnClientCert) ToSslVpnClientCertOutput 

func (i *SslVpnClientCert) ToSslVpnClientCertOutput() SslVpnClientCertOutput

func (*SslVpnClientCert) ToSslVpnClientCertOutputWithContext 

func (i *SslVpnClientCert) ToSslVpnClientCertOutputWithContext(ctx context.Context) SslVpnClientCertOutput

type SslVpnClientCertArgs 

type SslVpnClientCertArgs struct {
	// The name of the client certificate.
	Name pulumi.StringPtrInput
	// The ID of the SSL-VPN server.
	SslVpnServerId pulumi.StringInput
}

The set of arguments for constructing a SslVpnClientCert resource.

func (SslVpnClientCertArgs) ElementType 

func (SslVpnClientCertArgs) ElementType() reflect.Type

type SslVpnClientCertArray 

type SslVpnClientCertArray []SslVpnClientCertInput

func (SslVpnClientCertArray) ElementType 

func (SslVpnClientCertArray) ElementType() reflect.Type

func (SslVpnClientCertArray) ToSslVpnClientCertArrayOutput 

func (i SslVpnClientCertArray) ToSslVpnClientCertArrayOutput() SslVpnClientCertArrayOutput

func (SslVpnClientCertArray) ToSslVpnClientCertArrayOutputWithContext 

func (i SslVpnClientCertArray) ToSslVpnClientCertArrayOutputWithContext(ctx context.Context) SslVpnClientCertArrayOutput

type SslVpnClientCertArrayInput 

type SslVpnClientCertArrayInput interface {
	pulumi.Input

	ToSslVpnClientCertArrayOutput() SslVpnClientCertArrayOutput
	ToSslVpnClientCertArrayOutputWithContext(context.Context) SslVpnClientCertArrayOutput
}

SslVpnClientCertArrayInput is an input type that accepts SslVpnClientCertArray and SslVpnClientCertArrayOutput values. You can construct a concrete instance of `SslVpnClientCertArrayInput` via: 

SslVpnClientCertArray{ SslVpnClientCertArgs{...} }

type SslVpnClientCertArrayOutput 

type SslVpnClientCertArrayOutput struct{ *pulumi.OutputState }

func (SslVpnClientCertArrayOutput) ElementType 

func (SslVpnClientCertArrayOutput) ElementType() reflect.Type

func (SslVpnClientCertArrayOutput) Index 

func (o SslVpnClientCertArrayOutput) Index(i pulumi.IntInput) SslVpnClientCertOutput

func (SslVpnClientCertArrayOutput) ToSslVpnClientCertArrayOutput 

func (o SslVpnClientCertArrayOutput) ToSslVpnClientCertArrayOutput() SslVpnClientCertArrayOutput

func (SslVpnClientCertArrayOutput) ToSslVpnClientCertArrayOutputWithContext 

func (o SslVpnClientCertArrayOutput) ToSslVpnClientCertArrayOutputWithContext(ctx context.Context) SslVpnClientCertArrayOutput

type SslVpnClientCertInput 

type SslVpnClientCertInput interface {
	pulumi.Input

	ToSslVpnClientCertOutput() SslVpnClientCertOutput
	ToSslVpnClientCertOutputWithContext(ctx context.Context) SslVpnClientCertOutput
}

type SslVpnClientCertMap 

type SslVpnClientCertMap map[string]SslVpnClientCertInput

func (SslVpnClientCertMap) ElementType 

func (SslVpnClientCertMap) ElementType() reflect.Type

func (SslVpnClientCertMap) ToSslVpnClientCertMapOutput 

func (i SslVpnClientCertMap) ToSslVpnClientCertMapOutput() SslVpnClientCertMapOutput

func (SslVpnClientCertMap) ToSslVpnClientCertMapOutputWithContext 

func (i SslVpnClientCertMap) ToSslVpnClientCertMapOutputWithContext(ctx context.Context) SslVpnClientCertMapOutput

type SslVpnClientCertMapInput 

type SslVpnClientCertMapInput interface {
	pulumi.Input

	ToSslVpnClientCertMapOutput() SslVpnClientCertMapOutput
	ToSslVpnClientCertMapOutputWithContext(context.Context) SslVpnClientCertMapOutput
}

SslVpnClientCertMapInput is an input type that accepts SslVpnClientCertMap and SslVpnClientCertMapOutput values. You can construct a concrete instance of `SslVpnClientCertMapInput` via: 

SslVpnClientCertMap{ "key": SslVpnClientCertArgs{...} }

type SslVpnClientCertMapOutput 

type SslVpnClientCertMapOutput struct{ *pulumi.OutputState }

func (SslVpnClientCertMapOutput) ElementType 

func (SslVpnClientCertMapOutput) ElementType() reflect.Type

func (SslVpnClientCertMapOutput) MapIndex 

func (o SslVpnClientCertMapOutput) MapIndex(k pulumi.StringInput) SslVpnClientCertOutput

func (SslVpnClientCertMapOutput) ToSslVpnClientCertMapOutput 

func (o SslVpnClientCertMapOutput) ToSslVpnClientCertMapOutput() SslVpnClientCertMapOutput

func (SslVpnClientCertMapOutput) ToSslVpnClientCertMapOutputWithContext 

func (o SslVpnClientCertMapOutput) ToSslVpnClientCertMapOutputWithContext(ctx context.Context) SslVpnClientCertMapOutput

type SslVpnClientCertOutput 

type SslVpnClientCertOutput struct{ *pulumi.OutputState }

func (SslVpnClientCertOutput) CaCert added in v3.27.0 

func (o SslVpnClientCertOutput) CaCert() pulumi.StringOutput

The client ca cert.

func (SslVpnClientCertOutput) ClientCert added in v3.27.0 

func (o SslVpnClientCertOutput) ClientCert() pulumi.StringOutput

The client cert.

func (SslVpnClientCertOutput) ClientConfig added in v3.27.0 

func (o SslVpnClientCertOutput) ClientConfig() pulumi.StringOutput

The vpn client config.

func (SslVpnClientCertOutput) ClientKey added in v3.27.0 

func (o SslVpnClientCertOutput) ClientKey() pulumi.StringOutput

The client key.

func (SslVpnClientCertOutput) ElementType 

func (SslVpnClientCertOutput) ElementType() reflect.Type

func (SslVpnClientCertOutput) Name added in v3.27.0 

func (o SslVpnClientCertOutput) Name() pulumi.StringOutput

The name of the client certificate.

func (SslVpnClientCertOutput) SslVpnServerId added in v3.27.0 

func (o SslVpnClientCertOutput) SslVpnServerId() pulumi.StringOutput

The ID of the SSL-VPN server.

func (SslVpnClientCertOutput) Status added in v3.27.0 

func (o SslVpnClientCertOutput) Status() pulumi.StringOutput

The status of the client certificate.

func (SslVpnClientCertOutput) ToSslVpnClientCertOutput 

func (o SslVpnClientCertOutput) ToSslVpnClientCertOutput() SslVpnClientCertOutput

func (SslVpnClientCertOutput) ToSslVpnClientCertOutputWithContext 

func (o SslVpnClientCertOutput) ToSslVpnClientCertOutputWithContext(ctx context.Context) SslVpnClientCertOutput

type SslVpnClientCertState 

type SslVpnClientCertState struct {
	// The client ca cert.
	CaCert pulumi.StringPtrInput
	// The client cert.
	ClientCert pulumi.StringPtrInput
	// The vpn client config.
	ClientConfig pulumi.StringPtrInput
	// The client key.
	ClientKey pulumi.StringPtrInput
	// The name of the client certificate.
	Name pulumi.StringPtrInput
	// The ID of the SSL-VPN server.
	SslVpnServerId pulumi.StringPtrInput
	// The status of the client certificate.
	Status pulumi.StringPtrInput
}

func (SslVpnClientCertState) ElementType 

func (SslVpnClientCertState) ElementType() reflect.Type

type SslVpnServer 

type SslVpnServer struct {
	pulumi.CustomResourceState

	// The encryption algorithm that is used in the SSL-VPN connection. Valid values: `AES-128-CBC`,`AES-192-CBC`,`AES-256-CBC`,`none`. Default value: `AES-128-CBC`.
	// * `AES-128-CBC` - the AES-128-CBC algorithm.
	// * `AES-192-CBC` - the AES-192-CBC algorithm.
	// * `AES-256-CBC` - the AES-256-CBC algorithm.
	Cipher pulumi.StringPtrOutput `pulumi:"cipher"`
	// The CIDR block from which access addresses are allocated to the virtual network interface card of the client.
	ClientIpPool pulumi.StringOutput `pulumi:"clientIpPool"`
	// Specifies whether to enable data compression. Valid values: `true`,`false`. Default value: `false`
	Compress pulumi.BoolPtrOutput `pulumi:"compress"`
	// The number of current connections.
	Connections pulumi.IntOutput `pulumi:"connections"`
	// The internet IP of the SSL-VPN server.
	InternetIp pulumi.StringOutput `pulumi:"internetIp"`
	// The CIDR block to be accessed by the client through the SSL-VPN connection. It supports to set multi CIDRs by comma join ways, like `10.0.1.0/24,10.0.2.0/24,10.0.3.0/24`.
	LocalSubnet pulumi.StringOutput `pulumi:"localSubnet"`
	// The maximum number of connections.
	MaxConnections pulumi.IntOutput `pulumi:"maxConnections"`
	// The name of the SSL-VPN server.
	Name pulumi.StringOutput `pulumi:"name"`
	// The port used by the SSL-VPN server. The default value is `1194`.The following ports cannot be used: [22, 2222, 22222, 9000, 9001, 9002, 7505, 80, 443, 53, 68, 123, 4510, 4560, 500, 4500].
	Port pulumi.IntPtrOutput `pulumi:"port"`
	// The protocol used by the SSL-VPN server. Valid value: UDP(default) |TCP
	Protocol pulumi.StringPtrOutput `pulumi:"protocol"`
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringOutput `pulumi:"vpnGatewayId"`
}

## Example Usage

Basic Usage

## Import

SSL-VPN server can be imported using the id, e.g.

```sh $ pulumi import alicloud:vpn/sslVpnServer:SslVpnServer example vss-abc123456 ```

func GetSslVpnServer 

func GetSslVpnServer(ctx *pulumi.Context,
	name string, id pulumi.IDInput, state *SslVpnServerState, opts ...pulumi.ResourceOption) (*SslVpnServer, error)

GetSslVpnServer gets an existing SslVpnServer resource's state with the given name, ID, and optional state properties that are used to uniquely qualify the lookup (nil if not required).

func NewSslVpnServer 

func NewSslVpnServer(ctx *pulumi.Context,
	name string, args *SslVpnServerArgs, opts ...pulumi.ResourceOption) (*SslVpnServer, error)

NewSslVpnServer registers a new resource with the given unique name, arguments, and options.

func (*SslVpnServer) ElementType 

func (*SslVpnServer) ElementType() reflect.Type

func (*SslVpnServer) ToSslVpnServerOutput 

func (i *SslVpnServer) ToSslVpnServerOutput() SslVpnServerOutput

func (*SslVpnServer) ToSslVpnServerOutputWithContext 

func (i *SslVpnServer) ToSslVpnServerOutputWithContext(ctx context.Context) SslVpnServerOutput

type SslVpnServerArgs 

type SslVpnServerArgs struct {
	// The encryption algorithm that is used in the SSL-VPN connection. Valid values: `AES-128-CBC`,`AES-192-CBC`,`AES-256-CBC`,`none`. Default value: `AES-128-CBC`.
	// * `AES-128-CBC` - the AES-128-CBC algorithm.
	// * `AES-192-CBC` - the AES-192-CBC algorithm.
	// * `AES-256-CBC` - the AES-256-CBC algorithm.
	Cipher pulumi.StringPtrInput
	// The CIDR block from which access addresses are allocated to the virtual network interface card of the client.
	ClientIpPool pulumi.StringInput
	// Specifies whether to enable data compression. Valid values: `true`,`false`. Default value: `false`
	Compress pulumi.BoolPtrInput
	// The CIDR block to be accessed by the client through the SSL-VPN connection. It supports to set multi CIDRs by comma join ways, like `10.0.1.0/24,10.0.2.0/24,10.0.3.0/24`.
	LocalSubnet pulumi.StringInput
	// The name of the SSL-VPN server.
	Name pulumi.StringPtrInput
	// The port used by the SSL-VPN server. The default value is `1194`.The following ports cannot be used: [22, 2222, 22222, 9000, 9001, 9002, 7505, 80, 443, 53, 68, 123, 4510, 4560, 500, 4500].
	Port pulumi.IntPtrInput
	// The protocol used by the SSL-VPN server. Valid value: UDP(default) |TCP
	Protocol pulumi.StringPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringInput
}

The set of arguments for constructing a SslVpnServer resource.

func (SslVpnServerArgs) ElementType 

func (SslVpnServerArgs) ElementType() reflect.Type

type SslVpnServerArray 

type SslVpnServerArray []SslVpnServerInput

func (SslVpnServerArray) ElementType 

func (SslVpnServerArray) ElementType() reflect.Type

func (SslVpnServerArray) ToSslVpnServerArrayOutput 

func (i SslVpnServerArray) ToSslVpnServerArrayOutput() SslVpnServerArrayOutput

func (SslVpnServerArray) ToSslVpnServerArrayOutputWithContext 

func (i SslVpnServerArray) ToSslVpnServerArrayOutputWithContext(ctx context.Context) SslVpnServerArrayOutput

type SslVpnServerArrayInput 

type SslVpnServerArrayInput interface {
	pulumi.Input

	ToSslVpnServerArrayOutput() SslVpnServerArrayOutput
	ToSslVpnServerArrayOutputWithContext(context.Context) SslVpnServerArrayOutput
}

SslVpnServerArrayInput is an input type that accepts SslVpnServerArray and SslVpnServerArrayOutput values. You can construct a concrete instance of `SslVpnServerArrayInput` via: 

SslVpnServerArray{ SslVpnServerArgs{...} }

type SslVpnServerArrayOutput 

type SslVpnServerArrayOutput struct{ *pulumi.OutputState }

func (SslVpnServerArrayOutput) ElementType 

func (SslVpnServerArrayOutput) ElementType() reflect.Type

func (SslVpnServerArrayOutput) Index 

func (o SslVpnServerArrayOutput) Index(i pulumi.IntInput) SslVpnServerOutput

func (SslVpnServerArrayOutput) ToSslVpnServerArrayOutput 

func (o SslVpnServerArrayOutput) ToSslVpnServerArrayOutput() SslVpnServerArrayOutput

func (SslVpnServerArrayOutput) ToSslVpnServerArrayOutputWithContext 

func (o SslVpnServerArrayOutput) ToSslVpnServerArrayOutputWithContext(ctx context.Context) SslVpnServerArrayOutput

type SslVpnServerInput 

type SslVpnServerInput interface {
	pulumi.Input

	ToSslVpnServerOutput() SslVpnServerOutput
	ToSslVpnServerOutputWithContext(ctx context.Context) SslVpnServerOutput
}

type SslVpnServerMap 

type SslVpnServerMap map[string]SslVpnServerInput

func (SslVpnServerMap) ElementType 

func (SslVpnServerMap) ElementType() reflect.Type

func (SslVpnServerMap) ToSslVpnServerMapOutput 

func (i SslVpnServerMap) ToSslVpnServerMapOutput() SslVpnServerMapOutput

func (SslVpnServerMap) ToSslVpnServerMapOutputWithContext 

func (i SslVpnServerMap) ToSslVpnServerMapOutputWithContext(ctx context.Context) SslVpnServerMapOutput

type SslVpnServerMapInput 

type SslVpnServerMapInput interface {
	pulumi.Input

	ToSslVpnServerMapOutput() SslVpnServerMapOutput
	ToSslVpnServerMapOutputWithContext(context.Context) SslVpnServerMapOutput
}

SslVpnServerMapInput is an input type that accepts SslVpnServerMap and SslVpnServerMapOutput values. You can construct a concrete instance of `SslVpnServerMapInput` via: 

SslVpnServerMap{ "key": SslVpnServerArgs{...} }

type SslVpnServerMapOutput 

type SslVpnServerMapOutput struct{ *pulumi.OutputState }

func (SslVpnServerMapOutput) ElementType 

func (SslVpnServerMapOutput) ElementType() reflect.Type

func (SslVpnServerMapOutput) MapIndex 

func (o SslVpnServerMapOutput) MapIndex(k pulumi.StringInput) SslVpnServerOutput

func (SslVpnServerMapOutput) ToSslVpnServerMapOutput 

func (o SslVpnServerMapOutput) ToSslVpnServerMapOutput() SslVpnServerMapOutput

func (SslVpnServerMapOutput) ToSslVpnServerMapOutputWithContext 

func (o SslVpnServerMapOutput) ToSslVpnServerMapOutputWithContext(ctx context.Context) SslVpnServerMapOutput

type SslVpnServerOutput 

type SslVpnServerOutput struct{ *pulumi.OutputState }

func (SslVpnServerOutput) Cipher added in v3.27.0 

func (o SslVpnServerOutput) Cipher() pulumi.StringPtrOutput

The encryption algorithm that is used in the SSL-VPN connection. Valid values: `AES-128-CBC`,`AES-192-CBC`,`AES-256-CBC`,`none`. Default value: `AES-128-CBC`. * `AES-128-CBC` - the AES-128-CBC algorithm. * `AES-192-CBC` - the AES-192-CBC algorithm. * `AES-256-CBC` - the AES-256-CBC algorithm.

func (SslVpnServerOutput) ClientIpPool added in v3.27.0 

func (o SslVpnServerOutput) ClientIpPool() pulumi.StringOutput

The CIDR block from which access addresses are allocated to the virtual network interface card of the client.

func (SslVpnServerOutput) Compress added in v3.27.0 

func (o SslVpnServerOutput) Compress() pulumi.BoolPtrOutput

Specifies whether to enable data compression. Valid values: `true`,`false`. Default value: `false`

func (SslVpnServerOutput) Connections added in v3.27.0 

func (o SslVpnServerOutput) Connections() pulumi.IntOutput

The number of current connections.

func (SslVpnServerOutput) ElementType 

func (SslVpnServerOutput) ElementType() reflect.Type

func (SslVpnServerOutput) InternetIp added in v3.27.0 

func (o SslVpnServerOutput) InternetIp() pulumi.StringOutput

The internet IP of the SSL-VPN server.

func (SslVpnServerOutput) LocalSubnet added in v3.27.0 

func (o SslVpnServerOutput) LocalSubnet() pulumi.StringOutput

The CIDR block to be accessed by the client through the SSL-VPN connection. It supports to set multi CIDRs by comma join ways, like `10.0.1.0/24,10.0.2.0/24,10.0.3.0/24`.

func (SslVpnServerOutput) MaxConnections added in v3.27.0 

func (o SslVpnServerOutput) MaxConnections() pulumi.IntOutput

The maximum number of connections.

func (SslVpnServerOutput) Name added in v3.27.0 

func (o SslVpnServerOutput) Name() pulumi.StringOutput

The name of the SSL-VPN server.

func (SslVpnServerOutput) Port added in v3.27.0 

func (o SslVpnServerOutput) Port() pulumi.IntPtrOutput

The port used by the SSL-VPN server. The default value is `1194`.The following ports cannot be used: [22, 2222, 22222, 9000, 9001, 9002, 7505, 80, 443, 53, 68, 123, 4510, 4560, 500, 4500].

func (SslVpnServerOutput) Protocol added in v3.27.0 

func (o SslVpnServerOutput) Protocol() pulumi.StringPtrOutput

The protocol used by the SSL-VPN server. Valid value: UDP(default) |TCP

func (SslVpnServerOutput) ToSslVpnServerOutput 

func (o SslVpnServerOutput) ToSslVpnServerOutput() SslVpnServerOutput

func (SslVpnServerOutput) ToSslVpnServerOutputWithContext 

func (o SslVpnServerOutput) ToSslVpnServerOutputWithContext(ctx context.Context) SslVpnServerOutput

func (SslVpnServerOutput) VpnGatewayId added in v3.27.0 

func (o SslVpnServerOutput) VpnGatewayId() pulumi.StringOutput

The ID of the VPN gateway.

type SslVpnServerState 

type SslVpnServerState struct {
	// The encryption algorithm that is used in the SSL-VPN connection. Valid values: `AES-128-CBC`,`AES-192-CBC`,`AES-256-CBC`,`none`. Default value: `AES-128-CBC`.
	// * `AES-128-CBC` - the AES-128-CBC algorithm.
	// * `AES-192-CBC` - the AES-192-CBC algorithm.
	// * `AES-256-CBC` - the AES-256-CBC algorithm.
	Cipher pulumi.StringPtrInput
	// The CIDR block from which access addresses are allocated to the virtual network interface card of the client.
	ClientIpPool pulumi.StringPtrInput
	// Specifies whether to enable data compression. Valid values: `true`,`false`. Default value: `false`
	Compress pulumi.BoolPtrInput
	// The number of current connections.
	Connections pulumi.IntPtrInput
	// The internet IP of the SSL-VPN server.
	InternetIp pulumi.StringPtrInput
	// The CIDR block to be accessed by the client through the SSL-VPN connection. It supports to set multi CIDRs by comma join ways, like `10.0.1.0/24,10.0.2.0/24,10.0.3.0/24`.
	LocalSubnet pulumi.StringPtrInput
	// The maximum number of connections.
	MaxConnections pulumi.IntPtrInput
	// The name of the SSL-VPN server.
	Name pulumi.StringPtrInput
	// The port used by the SSL-VPN server. The default value is `1194`.The following ports cannot be used: [22, 2222, 22222, 9000, 9001, 9002, 7505, 80, 443, 53, 68, 123, 4510, 4560, 500, 4500].
	Port pulumi.IntPtrInput
	// The protocol used by the SSL-VPN server. Valid value: UDP(default) |TCP
	Protocol pulumi.StringPtrInput
	// The ID of the VPN gateway.
	VpnGatewayId pulumi.StringPtrInput
}

func (SslVpnServerState) ElementType 

func (SslVpnServerState) ElementType() reflect.Type

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.