simpleconf

README

simpleconf

simpleconf is a configuration server that holds a single JSON document and lets clients read and write paths inside it, such as product.name, over HTTP or a line-based TCP protocol. Writes go to an append-only file. Several nodes can run as a Raft cluster.

It is meant for the small, shared settings a handful of services read often and change occasionally: feature flags, endpoints, limits. If you need watches, per-key access control, TLS, or data that does not comfortably fit in memory, use etcd or Consul instead; simpleconf has none of those.

Quick start

Requires Go 1.25 or later.

go install github.com/shaunlee/simpleconf/cmd/simpleconf@latest
DB_DIR=./data simpleconf

HTTP listens on :23456. Write a value, then read it back:

curl -X PUT localhost:23456/db/product.name -d '"Demo"'
curl localhost:23456/db/product          # {"name":"Demo"}
curl localhost:23456/db                  # the whole document

With Docker, data lives in the /data volume:

docker run -p 23456:23456 -v simpleconf-data:/data shonhen/simpleconf

make docker builds the same image from a checkout.

Performance

A keyed read of the in-memory document takes about 10 ns and a write about 30 ns, whatever the document's size. Over the network, on one Apple M6 inside a Linux VM, a single key serves about 1M GET/s over HTTP with 200 connections, and 800k GET/s over TCP with 50 connections, rising to 16.5M GET/s when each connection pipelines 64 commands.

These comparisons favour simpleconf in ways that have nothing to do with its code: by default it fsyncs once a second, while etcd and Consul fsync every write before replying. docs/benchmarks.md has the setup, the caveats and the full tables.

Key paths

A key path selects a value inside the document. Segments are separated by .; a \ escapes the next character, so a key containing a literal dot is written fav\.movie.

curl -s localhost:23456/db/name.first
curl -s localhost:23456/db/friends.0.last
curl -s 'localhost:23456/db/fav\.movie'

Reads also accept gjson query syntax:

Path	Meaning
friends.#	number of elements
friends.#.first	that field from every element
friends.#(age>45)	the first element matching
friends.#(age>45)#	every element matching
friends.#(age>45)#.first	that field from every match
friends.#(first%"D*")#	% matches a pattern, !% negates it
fri*, n?me	* matches any run of characters, ? exactly one

Comparisons accept ==, =, !=, <, <=, > and >=. A bare path such as #(first) tests that the field exists, and #(!first) that it does not. gjson's @modifiers and | pipes are not supported.

# and ? cannot be used over HTTP. The key is taken from the URL path without percent-decoding, so %23 stays %23 rather than becoming #, and an unencoded # or ? is consumed by the client as a fragment or query string. Queries that use them work over TCP only; * works over both.

Writes take plain paths, with two extras from sjson: an index past the end of an array pads it with null, and index -1 appends.

curl -s -X PUT localhost:23456/db/ports -d '[80,443]'
curl -s -X PUT localhost:23456/db/ports.5 -d '8080'
curl -s localhost:23456/db/ports      # [80,443,null,null,null,8080]
curl -s -X PUT localhost:23456/db/ports.-1 -d '9090'
curl -s localhost:23456/db/ports      # [80,443,null,null,null,8080,9090]
curl -s -X DELETE localhost:23456/db/ports.0
curl -s localhost:23456/db/ports      # [443,null,null,null,8080,9090]

A value is stored as the JSON text the client sent, so an integer such as 9007199254740993 comes back with every digit.

HTTP API

Method and path	Does	Success
GET /	server role and version	200
GET /db	the whole document	200
GET /db/:key	the value at a key path; an empty body if there is none	200
PUT /db/:key	set the value at a key path; the body is raw JSON	202 {"ok":true}
DELETE /db/:key	delete a key path	202 {"ok":true}
POST /clone/:from/:to	copy one key path to another	202 {"ok":true}
POST /vacuum	rewrite the append-only file as one snapshot	202 {"ok":true}

Writes can fail with 422 for a body that is not valid JSON, 400 for a path that cannot be written (such as a non-numeric index into an array), and, in a Raft cluster, 409 from a follower that does not forward writes. Each error body is {"error":"..."}.

TCP protocol

Set tcp.listen to enable it. Each command is one line; set and clone take a second line.

Command	Request	Reply
whole document	=	$<length> line, then the document
get	=key.path	$<length> line, then the value ($0 and an empty line if there is none)
set	+key.path, then the JSON value on the next line	+OK
delete	-key.path	+OK
clone	<from.path, then >to.path on the next line	+OK
vacuum	*	+OK
ping	PING	+PONG

A failed command replies -ERR <message>, and a follower that does not forward writes replies -ERR not leader <leader http address>.

+product.name
"Demo"
+OK
=product.name
$6
"Demo"

Replies are flushed only when the server has no further command buffered, so a client that sends several commands before reading gets their replies in fewer writes.

Configuration

The server reads configs/config.yml from its working directory. The file is optional:

db:
  dir: data           # default /data
  fsync: everysec     # always | everysec | no
listen: :23456        # HTTP
tcp:
  listen: :23466      # TCP; off when unset

The environment variables LISTEN, TCP_LISTEN and DB_DIR override the matching settings. PEERS_LISTEN is used only when the file sets no peers.listen.

Key	Meaning
db.dir	data directory
db.fsync	when to fsync the append-only file; see below
listen	HTTP listen address
tcp.listen	TCP listen address
raft.*	see Raft cluster
peers.*	see Peers mode

There is no authentication and no TLS. Keep the ports on a private network, or put a proxy in front.

Durability

The append-only file is written by a background writer that batches records, so a burst of writes costs one write syscall rather than one per record. When the file is fsynced is controlled by db.fsync:

db.fsync	Survives kill -9	Survives power loss	Cost
always	yes	yes	writes block until fsync completes
everysec (default)	yes	up to 1s of writes lost	negligible
no	yes	lost until the OS flushes	none

Under always a successful PUT/DELETE/clone means the record is on disk; concurrent writers share one fsync through group commit. The cost is real, and it is dominated by the storage underneath rather than by simpleconf. The same wrk -t4 -c200 SET test, always against everysec:

Storage	always	everysec
Linux VM volume (the benchmarks)	189k/s	661k/s
macOS APFS/NVMe, native	24.6k/s	186k/s
ext4/NVMe, previous machine	19.5k/s	237k/s

A virtual disk makes fsync far cheaper than a physical one, so take the 3.5x ratio in the first row as the floor and the ~10x in the other two as what to expect on real hardware.

everysec and no both survive kill -9, because the writer flushes each batch to the kernel before going idle; they differ only in exposure to power loss.

A vacuum, and every clean shutdown, rewrites the file as one snapshot. The snapshot is written to a temporary file and renamed into place, and the previous file is kept alongside it with a timestamp suffix. These backups are not removed automatically.

Raft cluster

Each node needs its own raft.node_id, raft.listen and data directory, and every node lists all of them in raft.peers as id,raft_addr,http_addr. Set raft.bootstrap: true on one node, for the first start of the cluster only. Three nodes on 10.0.0.1–3, as configured on the first:

db:
  dir: /var/lib/simpleconf
listen: :23456
raft:
  enabled: true
  node_id: node-1
  listen: 10.0.0.1:7001               # an address the other nodes can reach, not 0.0.0.0
  http_addr: http://10.0.0.1:23456    # where other nodes send forwarded writes
  bootstrap: true
  peers:
    - node-1,10.0.0.1:7001,http://10.0.0.1:23456
    - node-2,10.0.0.2:7001,http://10.0.0.2:23456
    - node-3,10.0.0.3:7001,http://10.0.0.3:23456

Writes are committed through the leader. A follower passes a write on to the leader's HTTP address by default; with raft.forward: false it refuses the write and names the leader instead. Reads are answered by the node that receives them, so a follower can briefly return a value the leader has already replaced.

With Raft enabled the append-only file is not used, and db.fsync does not apply: the Raft log and its snapshots, under db.dir/raft, hold the data. A write is acknowledged once a majority of nodes have fsynced it to their log. Concurrent writes share an fsync, so a single client writing one key at a time sees the full cost of the disk; see the Raft figures in docs/benchmarks.md.

Peers mode

Without Raft, nodes can also copy each other's writes. This is simpler and weaker than Raft, and is kept for existing deployments.

peers:
  listen: :23457                        # accepts writes from other nodes
  addresses:                            # the other nodes' peers.listen
    - http://10.0.0.2:23457
    - http://10.0.0.3:23457

• On start, a node replaces its document with a copy from the first peer that answers.
• Each write is queued on disk under db.dir/peers-wal before the client gets its reply, and sent to every peer in the background, in order. A peer that cannot be reached is retried until it comes back. A write a peer rejects as invalid is dropped.
• Nothing resolves conflicts. Two nodes that change the same key at about the same time can end up with different values.

License

MIT