common

package
v0.15.0 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Oct 18, 2023 License: BSD-3-Clause Imports: 7 Imported by: 64

Documentation

Index

Constants

View Source 
const DefaultServiceRoot = "/redfish/v1/"

DefaultServiceRoot is the default path to the Redfish service endpoint.

Variables

This section is empty.

Functions

func CollectCollection added in v0.14.0 

func CollectCollection(get func(string), links []string)

CollectCollection will retrieve a collection of entitied from the Redfish service when you already have the set of individual links in the collection.

func CollectList added in v0.14.0 

func CollectList(get func(string), c Client, link string) error

CollectList will retrieve a collection of entities from the Redfish service.

func ConstructError added in v0.6.0 

func ConstructError(statusCode int, b []byte) error

ConstructError tries to create error if body is defined as redfish spec

Types

type ApplyTime 

type ApplyTime string

ApplyTime is when to apply a change. 

const (

	// ImmediateApplyTime shall be used to indicate the values within the
	// Settings resource are applied immediately.
	ImmediateApplyTime ApplyTime = "Immediate"
	// OnResetApplyTime shall be used to indicate the values within the
	// Settings resource are applied when the system or service is reset.
	OnResetApplyTime ApplyTime = "OnReset"
	// AtMaintenanceWindowStartApplyTime shall be used to indicate the values
	// within the Settings resource are applied during the maintenance window
	// specified by the MaintenanceWindowStartTime and
	// MaintenanceWindowDurationInSeconds properties. A service may perform
	// resets during this maintenance window.
	AtMaintenanceWindowStartApplyTime ApplyTime = "AtMaintenanceWindowStart"
	// InMaintenanceWindowOnResetApplyTime shall be used to indicate the
	// values within the Settings resource are applied during the maintenance
	// window specified by the MaintenanceWindowStartTime and
	// MaintenanceWindowDurationInSeconds properties, and if a reset occurs
	// within the maintenance window.
	InMaintenanceWindowOnResetApplyTime ApplyTime = "InMaintenanceWindowOnReset"
)

type Client 

type Client interface {
	Get(url string) (*http.Response, error)
	GetWithHeaders(url string, customHeaders map[string]string) (*http.Response, error)
	Post(url string, payload interface{}) (*http.Response, error)
	PostWithHeaders(url string, payload interface{}, customHeaders map[string]string) (*http.Response, error)
	PostMultipart(url string, payload map[string]io.Reader) (*http.Response, error)
	PostMultipartWithHeaders(url string, payload map[string]io.Reader, customHeaders map[string]string) (*http.Response, error)
	Patch(url string, payload interface{}) (*http.Response, error)
	PatchWithHeaders(url string, payload interface{}, customHeaders map[string]string) (*http.Response, error)
	Put(url string, payload interface{}) (*http.Response, error)
	PutWithHeaders(url string, payload interface{}, customHeaders map[string]string) (*http.Response, error)
	Delete(url string) (*http.Response, error)
	DeleteWithHeaders(url string, customHeaders map[string]string) (*http.Response, error)
}

Client is a connection to a Redfish service.

type Collection 

type Collection struct {
	Name            string `json:"Name"`
	ItemLinks       []string
	MembersNextLink string `json:"Members@odata.nextLink,omitempty"`
}

Collection represents a collection of entity references.

func GetCollection 

func GetCollection(c Client, uri string) (*Collection, error)

GetCollection retrieves a collection from the service.

func (*Collection) UnmarshalJSON 

func (c *Collection) UnmarshalJSON(b []byte) error

UnmarshalJSON unmarshals a collection from the raw JSON.

type CollectionError added in v0.11.0 

type CollectionError struct {
	Failures map[string]error
}

CollectionError is used for collecting errors when working with collections

func NewCollectionError added in v0.11.0 

func NewCollectionError() *CollectionError

NewCollectionError gets you a new *CollectionError it's useful for collecting and formatting errors that occur when fetching a collection

func (*CollectionError) Empty added in v0.11.0 

func (cr *CollectionError) Empty() bool

func (*CollectionError) Error added in v0.11.0 

func (cr *CollectionError) Error() string

type ContactInfo 

type ContactInfo struct {
	// ContactName shall contain the name of a person or
	// organization to contact for information about this resource.
	ContactName string
	// EmailAddress shall contain the email address for a person
	// or organization to contact for information about this resource.
	EmailAddress string
	// PhoneNumber shall contain the phone number for a person
	// or organization to contact for information about this resource.
	PhoneNumber string
}

ContactInfo is used to obtain more information from an individual or organization responsible for this resource.

type DayOfWeek 

type DayOfWeek string

DayOfWeek is Days of the Week. 

const (
	// MondayDayOfWeek Monday.
	MondayDayOfWeek DayOfWeek = "Monday"
	// TuesdayDayOfWeek Tuesday.
	TuesdayDayOfWeek DayOfWeek = "Tuesday"
	// WednesdayDayOfWeek Wednesday.
	WednesdayDayOfWeek DayOfWeek = "Wednesday"
	// ThursdayDayOfWeek Thursday.
	ThursdayDayOfWeek DayOfWeek = "Thursday"
	// FridayDayOfWeek Friday.
	FridayDayOfWeek DayOfWeek = "Friday"
	// SaturdayDayOfWeek Saturday.
	SaturdayDayOfWeek DayOfWeek = "Saturday"
	// SundayDayOfWeek Sunday.
	SundayDayOfWeek DayOfWeek = "Sunday"
	// EveryDayOfWeek shall be the only member in the array.
	EveryDayOfWeek DayOfWeek = "Every"
)

type DurableNameFormat 

type DurableNameFormat string

DurableNameFormat indicates the type of durable name. 

const (
	// NAADurableNameFormat shall be a hexadecimal representation of the Name Address
	// Authority structure as defined in the T11 Fibre Channel - Framing and Signaling
	// - 3 (FC-FS-3) specification.
	NAADurableNameFormat DurableNameFormat = "NAA"
	// IQNDurableNameFormat shall be in the iSCSI Qualified Name format as defined
	// in RFC 3720 and RFC 3721.
	IQNDurableNameFormat DurableNameFormat = "iQN"
	// FCWWNDurableNameFormat shall be a hexadecimal representation of the World
	// Wide Name format as defined in the T11 Fibre Channel Physical and Signaling
	// Interface Specification.
	FCWWNDurableNameFormat DurableNameFormat = "FC_WWN"
	// UUIDDurableNameFormat shall be the hexadecimal representation of the Universal
	// Unique Identifier as defined in the International Telecom Union's OSI networking
	// and system aspects - Naming, Addressing and Registration Specification.
	UUIDDurableNameFormat DurableNameFormat = "UUID"
	// EUIDurableNameFormat shall be the hexadecimal representation of the IEEE-defined
	// 64-bit Extended Unique Identifier as defined in the IEEE's Guidelines for
	// 64-bit Global Identifier (EUI-64) Specification.
	EUIDurableNameFormat DurableNameFormat = "EUI"
	// NQNDurableNameFormat shall be in the NVMe Qualified Name format as defined
	// in the NVN Express over Fabric Specification.
	NQNDurableNameFormat DurableNameFormat = "NQN"
	// NSIDDurableNameFormat shall be in the NVM Namespace Identifier format as
	// defined in the NVN Express Specification.
	NSIDDurableNameFormat DurableNameFormat = "NSID"
)

type ElectricalContext added in v0.15.0 

type ElectricalContext string

ElectricalContext is the combination of current-carrying conductors. 

const (
	// The circuits that share the L1 current-carrying conductor.
	Line1ElectricalContext ElectricalContext = "Line1"
	// The circuit formed by L1 and L2 current-carrying conductors.
	Line1ToLine2ElectricalContext ElectricalContext = "Line1ToLine2"
	// The circuit formed by L1 and neutral current-carrying conductors.
	Line1ToNeutralElectricalContext ElectricalContext = "Line1ToNeutral"
	// The circuit formed by L1, L2, and neutral current-carrying conductors.
	Line1ToNeutralAndL1L2ElectricalContext ElectricalContext = "Line1ToNeutralAndL1L2"
	// The circuits that share the L2 current-carrying conductor.
	Line2ElectricalContext ElectricalContext = "Line2"
	// The circuit formed by L2 and L3 current-carrying conductors.
	Line2ToLine3ElectricalContext ElectricalContext = "Line2ToLine3"
	// The circuit formed by L2 and neutral current-carrying conductors.
	Line2ToNeutralElectricalContext ElectricalContext = "Line2ToNeutral"
	// The circuit formed by L1, L2, and Neutral current-carrying conductors.
	Line2ToNeutralAndL1L2ElectricalContext ElectricalContext = "Line2ToNeutralAndL1L2"
	// The circuits formed by L2, L3, and neutral current-carrying conductors.
	Line2ToNeutralAndL2L3ElectricalContext ElectricalContext = "Line2ToNeutralAndL2L3"
	// The circuits that share the L3 current-carrying conductor.
	Line3ElectricalContext ElectricalContext = "Line3"
	// The circuit formed by L3 and L1 current-carrying conductors.
	Line3ToLine1ElectricalContext ElectricalContext = "Line3ToLine1"
	// The circuit formed by L3 and neutral current-carrying conductors.
	Line3ToNeutralElectricalContext ElectricalContext = "Line3ToNeutral"
	// The circuit formed by L3, L1, and neutral current-carrying conductors.
	Line3ToNeutralAndL3L1ElectricalContext ElectricalContext = "Line3ToNeutralAndL3L1"
	// The circuit formed by two current-carrying conductors.
	LineToLineElectricalContext ElectricalContext = "LineToLine"
	// The circuit formed by a line and neutral current-carrying conductor.
	LineToNeutralElectricalContext ElectricalContext = "LineToNeutral"
	// The grounded current-carrying return circuit of current-carrying conductors.
	NeutralElectricalContext ElectricalContext = "Neutral"
	// The circuit formed by all current-carrying conductors.
	TotalElectricalContext ElectricalContext = "Total"
)

type Entity 

type Entity struct {
	// ODataID is the location of the resource.
	ODataID string `json:"@odata.id"`
	// ID uniquely identifies the resource.
	ID string `json:"Id"`
	// Name is the name of the resource or array element.
	Name string `json:"Name"`
	// contains filtered or unexported fields
}

Entity provides the common basis for all Redfish and Swordfish objects.

func (*Entity) DisableEtagMatch added in v0.15.0 

func (e *Entity) DisableEtagMatch(b bool)

Disable Etag Match header from being sent by the client.

func (*Entity) Get added in v0.14.0 

func (e *Entity) Get(c Client, uri string, payload interface{}) error

Get performs a Get request against the Redfish service and save etag

func (*Entity) GetClient added in v0.15.0 

func (e *Entity) GetClient() Client

GetClient get the API client connection to use for accessing this entity.

func (*Entity) Patch added in v0.14.0 

func (e *Entity) Patch(uri string, payload interface{}) error

Patch performs a Patch request against the Redfish service with etag

func (*Entity) Post added in v0.14.0 

func (e *Entity) Post(uri string, payload interface{}) error

Post performs a Post request against the Redfish service with etag

func (*Entity) SetClient 

func (e *Entity) SetClient(c Client)

SetClient sets the API client connection to use for accessing this entity.

func (*Entity) StripEtagQuotes added in v0.15.0 

func (e *Entity) StripEtagQuotes(b bool)

Set stripEtagQuotes to enable/disable strupping etag quotes

func (*Entity) Update added in v0.5.0 

func (e *Entity) Update(originalEntity, updatedEntity reflect.Value, allowedUpdates []string) error

Update commits changes to an entity.

type ErrExtendedInfo added in v0.6.0 

type ErrExtendedInfo struct {
	// Indicating a specific error or message (not to be confused with the HTTP status code).
	// This code can be used to access a detailed message from a message registry.
	MessageID string `json:"MessageId"`
	// A human readable error message indicating the semantics associated with the error.
	// This shall be the complete message, and not rely on substitution variables.
	Message string
	// An optional array of strings representing the substitution parameter values for the message.
	// This shall be included in the response if a MessageId is specified for a parameterized message.
	MessageArgs []string
	// An optional string representing the severity of the error.
	Severity string
	// An optional string describing recommended action(s) to take to resolve the error.
	Resolution string
}

ErrExtendedInfo is for redfish ExtendedInfo error response TODO: support RelatedProperties

type Error added in v0.6.0 

type Error struct {

	// An integer that represents the status code returned by the API
	HTTPReturnedStatusCode int `json:"-"`
	// A string indicating a specific MessageId from the message registry.
	Code string `json:"code"`
	// A human readable error message corresponding to the message in the message registry.
	Message string `json:"message"`
	// An array of message objects describing one or more error message(s).
	ExtendedInfos []ErrExtendedInfo `json:"@Message.ExtendedInfo"`
	// contains filtered or unexported fields
}

Error is redfish error response object for HTTP status codes different from 200, 201 and 204

func (*Error) Error added in v0.6.0 

func (e *Error) Error() string

type Filter added in v0.15.0 

type Filter string

func (*Filter) ClearFilter added in v0.15.0 

func (e *Filter) ClearFilter()

func (*Filter) SetFilter added in v0.15.0 

func (e *Filter) SetFilter(opts ...FilterOption)

type FilterOption added in v0.15.0 

type FilterOption func(*Filter)

func WithSkip added in v0.15.0 

func WithSkip(skipNum int) FilterOption

func WithTop added in v0.15.0 

func WithTop(topNum int) FilterOption

type Health 

type Health string

Health indicates the health of a resource. 

const (
	// OKHealth indicates the health is normal.
	OKHealth Health = "OK"
	// WarningHealth indicates a condition exists that requires attention.
	WarningHealth Health = "Warning"
	// CriticalHealth indicates a critical condition exists that requires
	// immediate attention.
	CriticalHealth Health = "Critical"
)

type Identifier 

type Identifier struct {
	// DurableName indicates the world wide, persistent name of the resource.
	DurableName string
	// DurableNameFormat
	DurableNameFormat DurableNameFormat
}

Identifier shall contain any additional identifiers of a resource.

type IndicatorLED 

type IndicatorLED string

IndicatorLED represents LED indicator states 

const (
	// UnknownIndicatorLED indicates the state of the Indicator LED cannot be
	// determined.
	UnknownIndicatorLED IndicatorLED = "Unknown"
	// LitIndicatorLED indicates the Indicator LED is lit.
	LitIndicatorLED IndicatorLED = "Lit"
	// BlinkingIndicatorLED indicates the Indicator LED is blinking.
	BlinkingIndicatorLED IndicatorLED = "Blinking"
	// OffIndicatorLED indicates the Indicator LED is off.
	OffIndicatorLED IndicatorLED = "Off"
)
type Link string

Link is an OData link reference

func (Link) String added in v0.14.0 

func (l Link) String() string

func (*Link) UnmarshalJSON 

func (l *Link) UnmarshalJSON(b []byte) error

UnmarshalJSON unmarshals a Link 

type Links []Link

Links are a collection of Link references

func (Links) ToStrings 

func (l Links) ToStrings() []string

ToStrings converts a Link collection to a list of strings

type LinksCollection 

type LinksCollection struct {
	ODataCount int   `json:"@odata.count"`
	Count      int   `json:"Members@odata.count"`
	Members    Links `json:"Members"`
}

LinksCollection contains links to other entities

func (LinksCollection) ToStrings 

func (l LinksCollection) ToStrings() []string

ToStrings will extract the URI for all linked entities.

type Location 

type Location struct {
	// AltitudeMeters is the altitude of the resource in meters.
	AltitudeMeters int
	// Contacts is used to obtain more information from an individual or
	// organization responsible for this resource.
	Contacts []ContactInfo
	// Info shall represent the location of the resource.
	Info string
	// InfoFormat shall represent the format of the Info property.
	InfoFormat string
	// Latitude shall be the latitude of the resource specified
	// in degrees using a decimal format and not minutes or seconds.
	Latitude float32
	// Longitude shall be the longitude of the resource specified in degrees
	// using a decimal format and not minutes or seconds.
	Longitude float32
	// PartLocation is used to indicate the location within the Placement.
	PartLocation PartLocation
	// Placement shall be a place within the addressed location.
	Placement Placement
	// PostalAddress shall be a postal address of the resource.
	PostalAddress PostalAddress
}

Location shall describe the location of a resource.

type LocationType 

type LocationType string

LocationType shall name the type of location in use. 

const (
	// SlotLocationType shall be used to indicate the type of PartLocation is
	// of type slot.
	SlotLocationType LocationType = "Slot"
	// BayLocationType shall be used to indicate the type of PartLocation is
	// of type bay.
	BayLocationType LocationType = "Bay"
	// ConnectorLocationType shall be used to indicate the type of
	// PartLocation is of type connector.
	ConnectorLocationType LocationType = "Connector"
	// SocketLocationType shall be used to indicate the type of PartLocation
	// is of type socket.
	SocketLocationType LocationType = "Socket"
)

type MaintenanceWindow 

type MaintenanceWindow struct {
	// MaintenanceWindowDurationInSeconds shall
	// indicate the end of the maintenance window as the number of seconds
	// after the time specified by the MaintenanceWindowStartTime property.
	MaintenanceWindowDurationInSeconds int
	// MaintenanceWindowStartTime shall
	// indicate the date and time as to when the service is allowed to start
	// applying the requested settings or operation as part of a maintenance
	// window.
	MaintenanceWindowStartTime string
}

MaintenanceWindow shall indicate if a given resource has a maintenance window assignment for applying settings or operations. Other resources may reference this object in order to convey a common control surface for the configuration of the maintenance window.

type Message 

type Message struct {
	Entity

	// Message shall contain an optional human readable message.
	Message string
	// MessageArgs shall contain the message substitution
	// arguments for the specific message referenced by the MessageID and
	// shall only be included if the MessageID is present.  Number and
	// integer type arguments shall be converted to strings.
	MessageArgs []string
	// MessageID shall be a key into message registry as described in the
	// Redfish specification.
	MessageID string `json:"MessageId"`
	// RelatedProperties shall contain an array of JSON
	// Pointers indicating the properties described by the message, if
	// appropriate for the message.
	RelatedProperties []string
	// Resolution shall contain an override of the
	// Resolution of the message in message registry, if present.
	Resolution string
	// Severity is The value of this property shall be the severity of the
	// error, as defined in the Status section of the Redfish specification.
	Severity string
}

Message is This type shall define a Message as described in the Redfish specification.

func GetMessage 

func GetMessage(c Client, uri string) (*Message, error)

GetMessage will get a Message instance from the service.

func ListReferencedMessages 

func ListReferencedMessages(c Client, link string) ([]*Message, error)

ListReferencedMessages gets the collection of Message from a provided reference.

type MonthOfYear 

type MonthOfYear string

MonthOfYear is Months of the year. 

const (
	// JanuaryMonthOfYear January.
	JanuaryMonthOfYear MonthOfYear = "January"
	// FebruaryMonthOfYear February.
	FebruaryMonthOfYear MonthOfYear = "February"
	// MarchMonthOfYear March.
	MarchMonthOfYear MonthOfYear = "March"
	// AprilMonthOfYear April.
	AprilMonthOfYear MonthOfYear = "April"
	// MayMonthOfYear May.
	MayMonthOfYear MonthOfYear = "May"
	// JuneMonthOfYear June.
	JuneMonthOfYear MonthOfYear = "June"
	// JulyMonthOfYear July.
	JulyMonthOfYear MonthOfYear = "July"
	// AugustMonthOfYear August.
	AugustMonthOfYear MonthOfYear = "August"
	// SeptemberMonthOfYear September.
	SeptemberMonthOfYear MonthOfYear = "September"
	// OctoberMonthOfYear October.
	OctoberMonthOfYear MonthOfYear = "October"
	// NovemberMonthOfYear November.
	NovemberMonthOfYear MonthOfYear = "November"
	// DecemberMonthOfYear December.
	DecemberMonthOfYear MonthOfYear = "December"
	// EveryMonthOfYear shall be the only member in the array.
	EveryMonthOfYear MonthOfYear = "Every"
)

type OperationApplyTime 

type OperationApplyTime string

OperationApplyTime is when to perform the application. 

const (

	// ImmediateOperationApplyTime shall be used to indicate the requested
	// Create, Delete, or Action operation is applied immediately.
	ImmediateOperationApplyTime OperationApplyTime = "Immediate"
	// OnResetOperationApplyTime shall be used to indicate the requested
	// Create, Delete, or Action operation is applied when the system or
	// service is reset.
	OnResetOperationApplyTime OperationApplyTime = "OnReset"
	// AtMaintenanceWindowStartOperationApplyTime shall be used to indicate
	// the requested Create, Delete, or Action operation is applied during
	// the maintenance window specified by the MaintenanceWindowStartTime and
	// MaintenanceWindowDurationInSeconds properties. A service may perform
	// resets during this maintenance window.
	AtMaintenanceWindowStartOperationApplyTime OperationApplyTime = "AtMaintenanceWindowStart"
	// InMaintenanceWindowOnResetOperationApplyTime shall be used to indicate
	// the requested Create, Delete, or Action operation is applied during
	// the maintenance window specified by the MaintenanceWindowStartTime and
	// MaintenanceWindowDurationInSeconds properties, and if a reset occurs
	// within the maintenance window.
	InMaintenanceWindowOnResetOperationApplyTime OperationApplyTime = "InMaintenanceWindowOnReset"
)

type OperationApplyTimeSupport 

type OperationApplyTimeSupport struct {
	// MaintenanceWindowDurationInSeconds shall
	// be the same as the MaintenanceWindowDurationInSeconds property found
	// in the MaintenanceWindow structure on the MaintenanceWindowResource.
	// This property shall be required if the SupportedValues property
	// contains AtMaintenanceWindowStart or InMaintenanceWindowOnReset.
	MaintenanceWindowDurationInSeconds int
	// MaintenanceWindowResource shall be a
	// reference to a resource that contains the @Redfish.MaintenanceWindow
	// property which governs this resource. This property shall be required
	// if the SupportedValues property contains AtMaintenanceWindowStart or
	// InMaintenanceWindowOnReset.
	MaintenanceWindowResource string
	// MaintenanceWindowStartTime shall be the
	// same as the MaintenanceWindowStartTime property found in the
	// MaintenanceWindow structure on the MaintenanceWindowResource. This
	// property shall be required if the SupportedValues property contains
	// AtMaintenanceWindowStart or InMaintenanceWindowOnReset.
	MaintenanceWindowStartTime string
	// SupportedValues shall indicate the types
	// of apply times the client is allowed request when performing a Create,
	// Delete, or Action operation.
	SupportedValues []OperationApplyTime
}

OperationApplyTimeSupport shall specify the support a service has for a client to request a specific apply time of a Create, Delete, or Action operation of a given resource.

type Operations 

type Operations struct {
	// AssociatedTask shall be a reference to a resource of type Task that
	// represents the task associated with the operation.
	AssociatedTask string
	// OperationName shall be a string of the name of the operation.
	OperationName string
	// PercentageComplete shall be an integer of the percentage of the
	// operation that has been completed.
	PercentageComplete int
}

Operations shall describe a currently running operation on the resource.

type Orientation 

type Orientation string

Orientation shall name the orientation for the location type ordering in determining the LocationOrdinalValue. 

const (
	// FrontToBackOrientation shall be used to specify the ordering for
	// LocationOrdinalValue is front to back.
	FrontToBackOrientation Orientation = "FrontToBack"
	// BackToFrontOrientation shall be used to specify the ordering for
	// LocationOrdinalValue is back to front.
	BackToFrontOrientation Orientation = "BackToFront"
	// TopToBottomOrientation shall be used to specify the ordering for
	// LocationOrdinalValue is top to bottom.
	TopToBottomOrientation Orientation = "TopToBottom"
	// BottomToTopOrientation shall be used to specify the ordering for
	// LocationOrdinalValue is bottom to top.
	BottomToTopOrientation Orientation = "BottomToTop"
	// LeftToRightOrientation shall be used to specify the ordering for
	// LocationOrdinalValue is left to right.
	LeftToRightOrientation Orientation = "LeftToRight"
	// RightToLeftOrientation shall be used to specify the ordering for
	// LocationOrdinalValue is right to left.
	RightToLeftOrientation Orientation = "RightToLeft"
)

type PartLocation 

type PartLocation struct {
	// LocationOrdinalValue shall be the number that represents the location of
	// the part based on the LocationType. LocationOrdinalValue shall be
	// measured based on the Orientation value starting with 0.
	LocationOrdinalValue int
	// LocationType shall be a LocationType enumeration literal indicating the
	// type of rack units in use.
	LocationType LocationType
	// Orientation is used by the LocationOrdinalValue property.
	Orientation Orientation
	// Reference shall be a Reference enumeration literal indicating the general
	// location within the unit of the part.
	Reference Reference
	// ServiceLabel shall be the label assigned for service at the part location.
	ServiceLabel string
}

PartLocation is used to indicate the location within the Placement.

type PhysicalContext 

type PhysicalContext string

PhysicalContext is the physical location. 

const (
	// RoomPhysicalContext The room.
	RoomPhysicalContext PhysicalContext = "Room"
	// IntakePhysicalContext The air intake point(s) or region of the chassis.
	IntakePhysicalContext PhysicalContext = "Intake"
	// ExhaustPhysicalContext The air exhaust point(s) or region of the chassis.
	ExhaustPhysicalContext PhysicalContext = "Exhaust"
	// LiquidInletPhysicalContext The liquid inlet point of the chassis.
	LiquidInletPhysicalContext PhysicalContext = "LiquidInlet"
	// LiquidOutletPhysicalContext The liquid outlet point of the chassis.
	LiquidOutletPhysicalContext PhysicalContext = "LiquidOutlet"
	// FrontPhysicalContext The front of the chassis.
	FrontPhysicalContext PhysicalContext = "Front"
	// BackPhysicalContext The back of the chassis.
	BackPhysicalContext PhysicalContext = "Back"
	// UpperPhysicalContext The upper portion of the chassis.
	UpperPhysicalContext PhysicalContext = "Upper"
	// LowerPhysicalContext The lower portion of the chassis.
	LowerPhysicalContext PhysicalContext = "Lower"
	// CPUPhysicalContext A Processor (CPU).
	CPUPhysicalContext PhysicalContext = "CPU"
	// CPUSubsystemPhysicalContext The entire Processor (CPU) subsystem.
	CPUSubsystemPhysicalContext PhysicalContext = "CPUSubsystem"
	// GPUPhysicalContext A Graphics Processor (GPU).
	GPUPhysicalContext PhysicalContext = "GPU"
	// GPUSubsystemPhysicalContext The entire Graphics Processor (GPU)
	// subsystem.
	GPUSubsystemPhysicalContext PhysicalContext = "GPUSubsystem"
	// FPGAPhysicalContext A Field Programmable Gate Array (FPGA).
	FPGAPhysicalContext PhysicalContext = "FPGA"
	// AcceleratorPhysicalContext An Accelerator.
	AcceleratorPhysicalContext PhysicalContext = "Accelerator"
	// ASICPhysicalContext An ASIC device, such as networking chip or a chipset
	// component.
	ASICPhysicalContext PhysicalContext = "ASIC"
	// BackplanePhysicalContext A backplane within the chassis.
	BackplanePhysicalContext PhysicalContext = "Backplane"
	// SystemBoardPhysicalContext The system board (PCB).
	SystemBoardPhysicalContext PhysicalContext = "SystemBoard"
	// PowerSupplyPhysicalContext A power supply.
	PowerSupplyPhysicalContext PhysicalContext = "PowerSupply"
	// PowerSubsystemPhysicalContext The entire power subsystem.
	PowerSubsystemPhysicalContext PhysicalContext = "PowerSubsystem"
	// VoltageRegulatorPhysicalContext A voltage regulator device.
	VoltageRegulatorPhysicalContext PhysicalContext = "VoltageRegulator"
	// RectifierPhysicalContext A rectifier device.
	RectifierPhysicalContext PhysicalContext = "Rectifier"
	// StorageDevicePhysicalContext A storage device.
	StorageDevicePhysicalContext PhysicalContext = "StorageDevice"
	// NetworkingDevicePhysicalContext A networking device.
	NetworkingDevicePhysicalContext PhysicalContext = "NetworkingDevice"
	// ComputeBayPhysicalContext Within a compute bay.
	ComputeBayPhysicalContext PhysicalContext = "ComputeBay"
	// StorageBayPhysicalContext Within a storage bay.
	StorageBayPhysicalContext PhysicalContext = "StorageBay"
	// NetworkBayPhysicalContext Within a networking bay.
	NetworkBayPhysicalContext PhysicalContext = "NetworkBay"
	// ExpansionBayPhysicalContext Within an expansion bay.
	ExpansionBayPhysicalContext PhysicalContext = "ExpansionBay"
	// PowerSupplyBayPhysicalContext Within a power supply bay.
	PowerSupplyBayPhysicalContext PhysicalContext = "PowerSupplyBay"
	// MemoryPhysicalContext A memory device.
	MemoryPhysicalContext PhysicalContext = "Memory"
	// MemorySubsystemPhysicalContext The entire Memory subsystem.
	MemorySubsystemPhysicalContext PhysicalContext = "MemorySubsystem"
	// ChassisPhysicalContext The entire chassis.
	ChassisPhysicalContext PhysicalContext = "Chassis"
	// FanPhysicalContext A fan.
	FanPhysicalContext PhysicalContext = "Fan"
	// CoolingSubsystemPhysicalContext The entire cooling (air and liquid)
	// subsystem.
	CoolingSubsystemPhysicalContext PhysicalContext = "CoolingSubsystem"
	// MotorPhysicalContext A motor.
	MotorPhysicalContext PhysicalContext = "Motor"
	// TransformerPhysicalContext A Transformer.
	TransformerPhysicalContext PhysicalContext = "Transformer"
	// ACUtilityInputPhysicalContext An AC Utility Input.
	ACUtilityInputPhysicalContext PhysicalContext = "ACUtilityInput"
	// ACStaticBypassInputPhysicalContext An AC Static Bypass Input.
	ACStaticBypassInputPhysicalContext PhysicalContext = "ACStaticBypassInput"
	// ACMaintenanceBypassInputPhysicalContext An AC Maintenance Bypass Input.
	ACMaintenanceBypassInputPhysicalContext PhysicalContext = "ACMaintenanceBypassInput"
	// DCBusPhysicalContext A DC Bus.
	DCBusPhysicalContext PhysicalContext = "DCBus"
	// ACOutputPhysicalContext An AC Output.
	ACOutputPhysicalContext PhysicalContext = "ACOutput"
	// ACInputPhysicalContext An AC Input.
	ACInputPhysicalContext PhysicalContext = "ACInput"
	// A battery.
	BatteryPhysicalContext PhysicalContext = "Battery"
	// A circuit board.
	BoardPhysicalContext PhysicalContext = "Board"
	// A pump.
	PumpPhysicalContext PhysicalContext = "Pump"
	// A transceiver.
	TransceiverPhysicalContext PhysicalContext = "Transceiver"
	// A trusted module.
	TrustedModulePhysicalContext PhysicalContext = "TrustedModule"
)

type PhysicalSubContext 

type PhysicalSubContext string

PhysicalSubContext is the physical subcontext. 

const (

	// InputPhysicalSubContext The input.
	InputPhysicalSubContext PhysicalSubContext = "Input"
	// OutputPhysicalSubContext The output.
	OutputPhysicalSubContext PhysicalSubContext = "Output"
)

type Placement 

type Placement struct {
	// AdditionalInfo is used to describe a location that cannot be conveyed
	// with other properties defined for the Placement object.
	AdditionalInfo string
	// Rack shall be the name of the rack within a row.
	Rack string
	// RackOffset is the vertical location of the item in the rack. Rack offset
	// units shall be measured from bottom to top starting with 0.
	RackOffset int
	// RackOffsetUnits shall be a RackUnit enumeration literal indicating the
	// type of rack units in use.
	RackOffsetUnits RackUnits
	// Row shall be the name of the row.
	Row string
}

Placement shall describe a location within a resource. Examples include a shelf in a rack.

type PostalAddress 

type PostalAddress struct {
	// AdditionalCode shall conform the requirements of the ADDCODE field as
	// defined in RFC5139.
	AdditionalCode string
	// AdditionalInfo is used to provide additional information.
	AdditionalInfo string
	// Building is used to locate the resource.
	Building string
	// City is used to name a city, township, or shi (JP).
	City string
	// Community shall conform to the requirements of the PCN field
	// as defined in RFC5139. The value shall be a postal community name.
	Community string
	// Country shall conform the requirements of the Country
	// field as defined in RFC5139.
	Country string
	// District is used to name a county, parish, gun (JP), or district
	// (IN).
	District string
	// Division is used to name a city division, borough, city district,
	// ward, chou (JP).
	Division string
	// Floor is used to provide a floor designation.
	Floor string
	// GPSCoords shall conform the requirements of the ADDCODE
	// field as defined in RFC5139. The value shall be the GPS coordinates of
	// the location. If furnished, this shall be expressed in the format
	// '[-][nn]n.nnnnnn, [-][nn]n.nnnnn', i.e. two numbers, either positive
	// or negative, with six decimal places of precision, comma-separated.
	GPSCoords string
	// HouseNumber shall conform the requirements of the HNO
	// field as defined in RFC5139. It is the numeric portion of the house
	// number.
	HouseNumber int
	// HouseNumberSuffix is used to provide a suffix to a house number, (F,
	// B, 1/2).
	HouseNumberSuffix string
	// Landmark is used to identify a landmark or vanity address.
	Landmark string
	// LeadingStreetDirection is used to name a leading street direction, (N,
	// W, SE).
	LeadingStreetDirection string
	// Location is used to provide additional information.
	Location string
	// Name is the name of this resource.
	Name string
	// Neighborhood is used to name a neighborhood or block.
	Neighborhood string
	// POBox shall conform the requirements of the POBOX field
	// as defined in RFC5139. The value shall be a Post office box (P.O.
	// box).
	POBox string
	// PlaceType shall conform the requirements of the PLC field
	// as defined in RFC5139. Examples include: office, residence,...).
	PlaceType string
	// PostalCode shall conform the requirements of the PC field
	// as defined in RFC5139. The value shall be a Postal code (or zip code).
	PostalCode string
	// Road shall conform the requirements of the RD field as
	// defined in RFC5139. The value designates a primary road or street.
	Road string
	// RoadBranch shall conform the requirements of the RDBR
	// field as defined in RFC5139. The value shall be a Post office box
	// (P.O. box)road branch.
	RoadBranch string
	// RoadPostModifier shall conform the requirements of the
	// POM field as defined in RFC5139. (Extended).
	RoadPostModifier string
	// RoadPreModifier shall conform the requirements of the PRM
	// field as defined in RFC5139. (Old, New).
	RoadPreModifier string
	// RoadSection shall conform the requirements of the RDSEC
	// field as defined in RFC5139. The value shall be a road section.
	RoadSection string
	// RoadSubBranch shall conform the requirements of the
	// RDSUBBR field as defined in RFC5139.
	RoadSubBranch string
	// Room is used to locate the resource within the unit.
	Room string
	// Seat shall conform the requirements of the SEAT field as
	// defined in RFC5139. The value shall be a name or number of a Seat
	// (desk, cubicle, workstation).
	Seat string
	// Street is used to name a street.
	Street string
	// StreetSuffix is used to name a street suffix.
	StreetSuffix string
	// Territory is used to name a territory, state, region, province, or
	// prefecture within a country.
	Territory string
	// TrailingStreetSuffix is used to name a trailing street suffix.
	TrailingStreetSuffix string
	// Unit is used to locate the resource.
	Unit string
}

PostalAddress shall describe a postal address for a resource. For more information see RFC5139. Depending on use, the instance may represent a past, current, or future location.

type PreferredApplyTime 

type PreferredApplyTime struct {
	// ApplyTime shall indicate the preference
	// on to when to apply the values in this Settings resource.
	ApplyTime ApplyTime
	// MaintenanceWindowDurationInSeconds shall
	// indicate the end of the maintenance window as the number of seconds
	// after the time specified by the MaintenanceWindowStartTime property.
	// This property shall be required if the ApplyTime property is specified
	// as AtMaintenanceWindowStart or InMaintenanceWindowOnReset.
	MaintenanceWindowDurationInSeconds int
	// MaintenanceWindowStartTime shall
	// indicate the date and time as to when the service is allowed to start
	// applying the future configuration as part of a maintenance window.
	// This property shall be required if the ApplyTime property is specified
	// as AtMaintenanceWindowStart or InMaintenanceWindowOnReset.
	MaintenanceWindowStartTime string
}

PreferredApplyTime shall be specified by client in a request to indicate its preference on when to apply the values in this Settings resource.

type Protocol 

type Protocol string

Protocol is the communication protocol. 

const (
	// PCIeProtocol shall mean that this device conforms to the PCI-SIG PCI
	// Express Base Specification.
	PCIeProtocol Protocol = "PCIe"
	// AHCIProtocol shall mean that this device conforms to the Intel
	// Advanced Host Controller Interface Specification.
	AHCIProtocol Protocol = "AHCI"
	// UHCIProtocol shall mean that this device conforms to the Intel
	// Universal Host Controller Interface Specification, Enhanced Host
	// Controller Interface Specification, or the Extensible Host Controller
	// Interface specification.
	UHCIProtocol Protocol = "UHCI"
	// SASProtocol shall mean that this device conforms to the T10 SAS
	// Protocol Layer Specification.
	SASProtocol Protocol = "SAS"
	// SATAProtocol shall mean that this device conforms to the Serial ATA
	// International Organization Serial ATA Specification.
	SATAProtocol Protocol = "SATA"
	// USBProtocol shall mean that this device conforms to the USB
	// Implementers Forum Universal Serial Bus Specification.
	USBProtocol Protocol = "USB"
	// NVMeProtocol shall mean that this device conforms to the Non-Volatile
	// Memory Host Controller Interface Specification Specification.
	NVMeProtocol Protocol = "NVMe"
	// FCProtocol shall mean that this device conforms to the T11 Fibre
	// Channel Physical and Signaling Interface Specification.
	FCProtocol Protocol = "FC"
	// ISCSIProtocol shall mean that this device conforms to the IETF
	// Internet Small Computer Systems Interface (iSCSI) Specification.
	ISCSIProtocol Protocol = "iSCSI"
	// FCoEProtocol shall mean that this device conforms to the T11 FC-BB-5
	// Specification.
	FCoEProtocol Protocol = "FCoE"
	// FCPProtocol shall indicate the INCITS 481: Information technology -
	// Fibre Channel Protocol for SCSI.  The Fibre Channel SCSI Protocol.
	FCPProtocol Protocol = "FCP"
	// FICONProtocol shall indicate the (ANSI FC-SB-3 Single-Byte Command
	// Code Sets-3 Mapping Protocol for the Fibre Channel(FC) protocol.
	// FICON (FIbre CONnection) is the IBM proprietary name for this
	// protocol.
	FICONProtocol Protocol = "FICON"
	// NVMeOverFabricsProtocol shall mean that this device conforms to the
	// NVM Express over Fabrics Specification.
	NVMeOverFabricsProtocol Protocol = "NVMeOverFabrics"
	// SMBProtocol shall mean that this device conforms to the Microsoft
	// Server Message Block Protocol.
	SMBProtocol Protocol = "SMB"
	// NFSv3Protocol shall mean that this device conforms to the Network File
	// System protocol as defined by RFC 1813.
	NFSv3Protocol Protocol = "NFSv3"
	// NFSv4Protocol shall mean that this device conforms to the Network File
	// System protocol as defined by RFC 3010 or RFC 5661.
	NFSv4Protocol Protocol = "NFSv4"
	// HTTPProtocol shall mean that this device conforms to the Hypertext
	// Transfer protocol as defined by RFC 2068 or RFC 2616.
	HTTPProtocol Protocol = "HTTP"
	// HTTPSProtocol shall mean that this device conforms to the Hypertext
	// Transfer protocol as defined by RFC 2068 or RFC 2616 utilizing
	// Transport Layer Security as specified by RFC 5246 or RFC 6176.
	HTTPSProtocol Protocol = "HTTPS"
	// FTPProtocol shall mean that this device conforms to the File Transfer
	// protocol as defined by RFC 114.
	FTPProtocol Protocol = "FTP"
	// SFTPProtocol shall mean that this device conforms to the File Transfer
	// protocol as defined by RFC 114 utilizing Transport Layer Security as
	// specified by RFC 5246 or RFC 6176.
	SFTPProtocol Protocol = "SFTP"
	// IWARPProtocol shall mean that this device conforms to the iWARP
	// protocol as defined by RFC 5042 utilizing Transport Layer mechanisms
	// as specified by RFC 5043 or RFC 5044.
	IWARPProtocol Protocol = "iWARP"
	// RoCEProtocol shall mean that this device conforms to the RDMA over
	// Converged Ethernet protocol as defined by the Infiniband Architecture
	// Specification.
	RoCEProtocol Protocol = "RoCE"
	// RoCEv2Protocol shall mean that this device conforms to the RDMA over
	// Converged Ethernet version 2 protocol as defined by the Infiniband
	// Architecture Specification.
	RoCEv2Protocol Protocol = "RoCEv2"
	// I2CProtocol shall mean that this device conforms to the NXP
	// Semiconductors I2C-bus Specification.
	I2CProtocol Protocol = "I2C"
	// OEMProtocol shall mean that this device conforms to an OEM specific
	// architecture and additional information may be included in the OEM
	// section.
	OEMProtocol Protocol = "OEM"
)

type RackUnits 

type RackUnits string

RackUnits shall name the type of rack units in use. 

const (
	// OpenURackUnits shall be specified in terms of the Open Compute Open
	// Rack specification.
	OpenURackUnits RackUnits = "OpenU"
	// EIA310RackUnits shall be specified as defined by the EIA-310
	// standard.
	EIA310RackUnits RackUnits = "EIA_310"
)

type Reference 

type Reference string

Reference shall name the reference for the part location. 

const (
	// TopReference shall be used to specify the part location is in the top
	// of the unit.
	TopReference Reference = "Top"
	// BottomReference shall be used to specify the part location is in the
	// bottom of the unit.
	BottomReference Reference = "Bottom"
	// FrontReference shall be used to specify the part location is in the
	// front of the unit.
	FrontReference Reference = "Front"
	// RearReference shall be used to specify the part location is in the
	// rear of the unit.
	RearReference Reference = "Rear"
	// LeftReference shall be used to specify the part location is in the
	// left of the unit.
	LeftReference Reference = "Left"
	// RightReference shall be used to specify the part location is in the
	// right of the unit.
	RightReference Reference = "Right"
	// MiddleReference shall be used to specify the part location is in the
	// middle of the unit.
	MiddleReference Reference = "Middle"
)

type ReferenceableMember 

type ReferenceableMember struct {
	// ODataID is the odata identifier.
	ODataID string `json:"@odata.id"`
	// MemberId shall uniquely identify the member within the collection.
	MemberID string
}

ReferenceableMember array members can be referenced using the value returned in the @odata.id property which may or may not be a dereferenceable URL. The @odata.id of this entity shall be the location of this element within an Item.

type Resource 

type Resource struct {
	Entity
	// ODataContext is the odata context.
	ODataContext string `json:"@odata.context"`
	// ODataType is the odata type.
	ODataType string `json:"@odata.type"`
	// Description provides a description of this resource.
	Description string
}

Resource is the base type for resources and referenceable members.

type ResourceCollection 

type ResourceCollection struct {
	// ODataContext is the odata context.
	ODataContext string `json:"@odata.context"`
	// ODataID is the odata identifier.
	ODataID string `json:"@odata.id"`
	// ODataType is the odata type.
	ODataType string `json:"@odata.type"`
	// Description provides a description of this resource.
	Description string
	// Name is the name of this resource
	Name string
	// Oem is The value of this string shall be of the format for the
	// reserved word *Oem*.
	OEM string `json:"Oem"`
}

ResourceCollection is

type Schedule 

type Schedule struct {
	// EnabledDaysOfMonth is Days of month when scheduled occurrences are
	// enabled, for enabled days of week and months of year. If the array
	// contains a single value of zero, or if the property is not present,
	// all days of the month shall be enabled.
	EnabledDaysOfMonth []int
	// EnabledDaysOfWeek is Days of the week when scheduled occurrences are
	// enabled. If not present, all days of the week shall be enabled.
	EnabledDaysOfWeek []DayOfWeek
	// EnabledIntervals shall be an ISO 8601 conformant interval specifying when
	// occurrences are enabled.
	EnabledIntervals []string
	// EnabledMonthsOfYear is Months of year when scheduled occurrences are
	// enabled, for enabled days of week and days of month. If not present,
	// all months of the year shall be enabled.
	EnabledMonthsOfYear []MonthOfYear
	// InitialStartTime shall be a date and time of day on which the initial
	// occurrence is scheduled to occur.
	InitialStartTime string
	// Lifetime shall be a Redfish Duration describing the time after
	// provisioning when the schedule expires.
	Lifetime string
	// MaxOccurrences is Maximum number of scheduled occurrences.
	MaxOccurrences int
	// RecurrenceInterval shall be a Redfish Duration describing the time until
	// the next occurrence.
	RecurrenceInterval string
}

Schedule is used to Schedule a series of occurrences.

type Settings 

type Settings struct {
	// ETag shall be the ETag of the resource to which the settings were
	// applied, after the application. This is here so that the client can check
	// it against the ETag of the current resource to see if any other changes
	// have also happened to the resource.
	ETag string
	// MaintenanceWindowResource shall be a
	// reference to a resource that contains the @Redfish.MaintenanceWindow
	// property which governs this resource. This property should be
	// supported if the SupportedApplyTimes property contains
	// AtMaintenanceWindowStart or InMaintenanceWindowOnReset.
	MaintenanceWindowResource string
	// Messages shall be an array of messages
	// associated with the task.
	Messages []Message
	// SettingsObject shall be the URI of the resource to which a client must do
	// a PUT or PATCH in order to modify this resource.
	SettingsObject Link
	// SupportedApplyTimes is A service shall advertise its applytime
	// capabilities using this property as to when a Setting resource can be
	// applied.
	SupportedApplyTimes []ApplyTime
	// Time shall indicate the time that the settings object was applied to the
	// resource.
	Time string
}

Settings shall describe any attributes of a resource.

type State 

type State string

State indicates the known state of the resource, such as if it is enabled. 

const (
	// EnabledState indicates this function or resource has been enabled.
	EnabledState State = "Enabled"
	// DisabledState State indicates this function or resource has been disabled.
	DisabledState State = "Disabled"
	// StandbyOfflineState indicates this function or resource is enabled,
	// but awaiting an external action to activate it.
	StandbyOfflineState State = "StandbyOffline"
	// StandbySpareState indicates this function or resource is part of a
	// redundancy set and is awaiting a failover or other external action to
	// activate it.
	StandbySpareState State = "StandbySpare"
	// InTestState indicates this function or resource is undergoing testing.
	InTestState State = "InTest"
	// StartingState indicates this function or resource is starting.
	StartingState State = "Starting"
	// AbsentState indicates this function or resource is not present or not
	// detected.
	AbsentState State = "Absent"
	// UnavailableOfflineState indicates this function or resource is present
	// but cannot be used.
	UnavailableOfflineState State = "UnavailableOffline"
	// DeferringState indicates the element will not process any commands but
	// will queue new requests.
	DeferringState State = "Deferring"
	// QuiescedState indicates the element is enabled but only processes a
	// restricted set of commands.
	QuiescedState State = "Quiesced"
	// UpdatingState indicates the element is updating and may be unavailable
	// or degraded.
	UpdatingState State = "Updating"
)

type Status 

type Status struct {
	Health       Health `json:"Health"`
	HealthRollup Health `json:"HealthRollup"`
	State        State  `json:"State"`
}

Status describes the status and health of a resource and its children.

type TestAPICall added in v0.5.0 

type TestAPICall struct {
	// Action is the REST action (GET, PUT, etc) of the call
	Action string
	// URL is the URL to send to
	URL string
	// Payload is the string representation of the payload
	Payload string
	// CustomHeaders is the Map that holds customer HTTP headers
	CustomHeaders map[string]string
}

TestAPICall captures the arguments to one of the API calls.

type TestClient added in v0.5.0 

type TestClient struct {

	// CustomReturnForActions can be used to define custom
	// return for actions, valid keys are:
	// http.MethodGet, http.MethodPost, http.MethodPut,
	// http.MethodPatch and http.MethodDelete.
	// For each key it is possible to define a list of
	// returns (in the order they should be returned).
	CustomReturnForActions map[string][]interface{}
	// contains filtered or unexported fields
}

TestClient is a mock client to use for unit testing some of the function calls and actions that would normally need to connect with a host.

func (*TestClient) CapturedCalls added in v0.5.0 

func (c *TestClient) CapturedCalls() []TestAPICall

CapturedCalls gets all calls that were made through this instance

func (*TestClient) Delete added in v0.5.0 

func (c *TestClient) Delete(url string) (*http.Response, error)

Delete performs a Delete request against the Redfish service.

func (*TestClient) DeleteWithHeaders added in v0.10.0 

func (c *TestClient) DeleteWithHeaders(url string, customHeaders map[string]string) (*http.Response, error)

DeleteWithHeaders performs a Delete request against the Redfish service.

func (*TestClient) Get added in v0.5.0 

func (c *TestClient) Get(url string) (*http.Response, error)

Get performs a GET request against the Redfish service.

func (*TestClient) GetWithHeaders added in v0.10.0 

func (c *TestClient) GetWithHeaders(url string, customHeaders map[string]string) (*http.Response, error)

GetWithHeaders performs a GET request against the Redfish service.

func (*TestClient) Patch added in v0.5.0 

func (c *TestClient) Patch(url string, payload interface{}) (*http.Response, error)

Patch performs a Patch request against the Redfish service.

func (*TestClient) PatchWithHeaders added in v0.10.0 

func (c *TestClient) PatchWithHeaders(url string, payload interface{}, customHeaders map[string]string) (*http.Response, error)

PatchWithHeaders performs a Patch request against the Redfish service.

func (*TestClient) Post added in v0.5.0 

func (c *TestClient) Post(url string, payload interface{}) (*http.Response, error)

Post performs a Post request against the Redfish service.

func (*TestClient) PostMultipart added in v0.10.0 

func (c *TestClient) PostMultipart(url string, payload map[string]io.Reader) (*http.Response, error)

PostMultipart performs a Post request against the Redfish service.

func (*TestClient) PostMultipartWithHeaders added in v0.10.0 

func (c *TestClient) PostMultipartWithHeaders(url string, payload map[string]io.Reader, customHeaders map[string]string) (*http.Response, error)

PostMultipartWithHeaders performs a Post request against the Redfish service.

func (*TestClient) PostWithHeaders added in v0.10.0 

func (c *TestClient) PostWithHeaders(url string, payload interface{}, customHeaders map[string]string) (*http.Response, error)

PostWithHeaders performs a Post request against the Redfish service.

func (*TestClient) Put added in v0.5.0 

func (c *TestClient) Put(url string, payload interface{}) (*http.Response, error)

Put performs a Put request against the Redfish service.

func (*TestClient) PutWithHeaders added in v0.10.0 

func (c *TestClient) PutWithHeaders(url string, payload interface{}, customHeaders map[string]string) (*http.Response, error)

PutWithHeaders performs a Put request against the Redfish service.

func (*TestClient) Reset added in v0.5.0 

func (c *TestClient) Reset()

Reset resets the captured information for this mock client.

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.