serial

package module
v1.5.1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Mar 21, 2023 License: BSD-3-Clause Imports: 9 Imported by: 0

README

Build Status

go.bug.st/serial

A cross-platform serial library for go-lang.

Documentation and examples

See the godoc here: https://godoc.org/go.bug.st/serial

go.mod transition

This library now support go.mod with the import github.com/weasel-software/go-serial.

If you came from the pre-go.mod era please update your import paths from github.com/weasel-software/go-serial.v1 to github.com/weasel-software/go-serial to receive new updates. Anyway, the latest v1 release should still be avaiable using the old import.

Credits

✨ Thanks to all awesome contributors! ✨

License

The software is release under a BSD 3-clause license

Documentation

Overview

Package serial is a cross-platform serial library for the go language.

The canonical import for this library is github.com/weasel-software/go-serial so the import line is the following: 

import "github.com/weasel-software/go-serial"

It is possible to get the list of available serial ports with the GetPortsList function: 

ports, err := serial.GetPortsList()
if err != nil {
	log.Fatal(err)
}
if len(ports) == 0 {
	log.Fatal("No serial ports found!")
}
for _, port := range ports {
	fmt.Printf("Found port: %v\n", port)
}

The serial port can be opened with the Open function: 

mode := &serial.Mode{
	BaudRate: 115200,
}
port, err := serial.Open("/dev/ttyUSB0", mode)
if err != nil {
	log.Fatal(err)
}

The Open function needs a "mode" parameter that specifies the configuration options for the serial port. If not specified the default options are 9600_N81, in the example above only the speed is changed so the port is opened using 115200_N81. The following snippets shows how to declare a configuration for 57600_E71: 

mode := &serial.Mode{
	BaudRate: 57600,
	Parity: serial.EvenParity,
	DataBits: 7,
	StopBits: serial.OneStopBit,
}

The configuration can be changed at any time with the SetMode function: 

err := port.SetMode(mode)
if err != nil {
	log.Fatal(err)
}

The port object implements the io.ReadWriteCloser interface, so we can use the usual Read, Write and Close functions to send and receive data from the serial port: 

n, err := port.Write([]byte("10,20,30\n\r"))
if err != nil {
	log.Fatal(err)
}
fmt.Printf("Sent %v bytes\n", n)

buff := make([]byte, 100)
for {
	n, err := port.Read(buff)
	if err != nil {
		log.Fatal(err)
		break
	}
	if n == 0 {
		fmt.Println("\nEOF")
		break
	}
	fmt.Printf("%v", string(buff[:n]))
}

If a port is a virtual USB-CDC serial port (for example an USB-to-RS232 cable or a microcontroller development board) is possible to retrieve the USB metadata, like VID/PID or USB Serial Number, with the GetDetailedPortsList function in the enumerator package: 

import "github.com/weasel-software/go-serial/enumerator"

ports, err := enumerator.GetDetailedPortsList()
if err != nil {
	log.Fatal(err)
}
if len(ports) == 0 {
	fmt.Println("No serial ports found!")
	return
}
for _, port := range ports {
	fmt.Printf("Found port: %s\n", port.Name)
	if port.IsUSB {
		fmt.Printf("   USB ID     %s:%s\n", port.VID, port.PID)
		fmt.Printf("   USB serial %s\n", port.SerialNumber)
	}
}

for details on USB port enumeration see the documentation of the specific package.

This library tries to avoid the use of the "C" package (and consequently the need of cgo) to simplify cross compiling. Unfortunately the USB enumeration package for darwin (MacOSX) requires cgo to access the IOKit framework. This means that if you need USB enumeration on darwin you're forced to use cgo.

Example (SendAndReceive)

This example prints the list of serial ports and use the first one to send a string "10,20,30" and prints the response on the screen. 

// Retrieve the port list
ports, err := serial.GetPortsList()
if err != nil {
	log.Fatal(err)
}
if len(ports) == 0 {
	log.Fatal("No serial ports found!")
}

// Print the list of detected ports
for _, port := range ports {
	fmt.Printf("Found port: %v\n", port)
}

// Open the first serial port detected at 9600bps N81
mode := &serial.Mode{
	BaudRate: 9600,
	Parity:   serial.NoParity,
	DataBits: 8,
	StopBits: serial.OneStopBit,
}
port, err := serial.Open(ports[0], mode)
if err != nil {
	log.Fatal(err)
}

// Send the string "10,20,30\n\r" to the serial port
n, err := port.Write([]byte("10,20,30\n\r"))
if err != nil {
	log.Fatal(err)
}
fmt.Printf("Sent %v bytes\n", n)

// Read and print the response

buff := make([]byte, 100)
for {
	// Reads up to 100 bytes
	n, err := port.Read(buff)
	if err != nil {
		log.Fatal(err)
	}
	if n == 0 {
		fmt.Println("\nEOF")
		break
	}

	fmt.Printf("%s", string(buff[:n]))

	// If we receive a newline stop reading
	if strings.Contains(string(buff[:n]), "\n") {
		break
	}
}

Output:

Index

Examples

Constants

This section is empty.

Variables

View Source 
var NoTimeout time.Duration = -1

NoTimeout should be used as a parameter to SetReadTimeout to disable timeout.

Functions

func GetPortsList 

func GetPortsList() ([]string, error)

GetPortsList retrieve the list of available serial ports

Example 
ports, err := serial.GetPortsList()
if err != nil {
	log.Fatal(err)
}
if len(ports) == 0 {
	fmt.Println("No serial ports found!")
} else {
	for _, port := range ports {
		fmt.Printf("Found port: %v\n", port)
	}
}

Output:

Types

type Mode 

type Mode struct {
	BaudRate          int              // The serial port bitrate (aka Baudrate)
	DataBits          int              // Size of the character (must be 5, 6, 7 or 8)
	Parity            Parity           // Parity (see Parity type for more info)
	StopBits          StopBits         // Stop bits (see StopBits type for more info)
	InitialStatusBits *ModemOutputBits // Initial output modem bits status (if nil defaults to DTR=true and RTS=true)
}

Mode describes a serial port configuration.

type ModemOutputBits 

type ModemOutputBits struct {
	RTS bool // ReadyToSend status
	DTR bool // DataTerminalReady status
}

ModemOutputBits contains all the modem output bits for a serial port. This is used in the Mode.InitialStatusBits struct to specify the initial status of the bits. Note: Linux and MacOSX (and basically all unix-based systems) can not set the status bits before opening the port, even if the initial state of the bit is set to false they will go anyway to true for a few milliseconds, resulting in a small pulse.

type ModemStatusBits 

type ModemStatusBits struct {
	CTS bool // ClearToSend status
	DSR bool // DataSetReady status
	RI  bool // RingIndicator status
	DCD bool // DataCarrierDetect status
}

ModemStatusBits contains all the modem input status bits for a serial port (CTS, DSR, etc...). It can be retrieved with the Port.GetModemStatusBits() method.

type Parity 

type Parity int

Parity describes a serial port parity setting 

const (
	// NoParity disable parity control (default)
	NoParity Parity = iota
	// OddParity enable odd-parity check
	OddParity
	// EvenParity enable even-parity check
	EvenParity
	// MarkParity enable mark-parity (always 1) check
	MarkParity
	// SpaceParity enable space-parity (always 0) check
	SpaceParity
)

type Port 

type Port interface {
	// SetMode sets all parameters of the serial port
	SetMode(mode *Mode) error

	// Stores data received from the serial port into the provided byte array
	// buffer. The function returns the number of bytes read.
	//
	// The Read function blocks until (at least) one byte is received from
	// the serial port or an error occurs.
	Read(p []byte) (n int, err error)

	// Send the content of the data byte array to the serial port.
	// Returns the number of bytes written.
	Write(p []byte) (n int, err error)

	// ResetInputBuffer Purges port read buffer
	ResetInputBuffer() error

	// ResetOutputBuffer Purges port write buffer
	ResetOutputBuffer() error

	// SetDTR sets the modem status bit DataTerminalReady
	SetDTR(dtr bool) error

	// SetRTS sets the modem status bit RequestToSend
	SetRTS(rts bool) error

	// GetModemStatusBits returns a ModemStatusBits structure containing the
	// modem status bits for the serial port (CTS, DSR, etc...)
	GetModemStatusBits() (*ModemStatusBits, error)

	// SetReadTimeout sets the timeout for the Read operation or use serial.NoTimeout
	// to disable read timeout.
	SetReadTimeout(t time.Duration) error

	// Close the serial port
	Close() error

	// Break sends a break for a determined time
	Break(time.Duration) error
}

Port is the interface for a serial Port

func Open 

func Open(portName string, mode *Mode) (Port, error)

Open opens the serial port using the specified modes

type PortError 

type PortError struct {
	// contains filtered or unexported fields
}

PortError is a platform independent error type for serial ports

func (PortError) Code 

func (e PortError) Code() PortErrorCode

Code returns an identifier for the kind of error occurred

func (PortError) EncodedErrorString 

func (e PortError) EncodedErrorString() string

EncodedErrorString returns a string explaining the error code

func (PortError) Error 

func (e PortError) Error() string

Error returns the complete error code with details on the cause of the error

type PortErrorCode 

type PortErrorCode int

PortErrorCode is a code to easily identify the type of error 

const (
	// PortBusy the serial port is already in used by another process
	PortBusy PortErrorCode = iota
	// PortNotFound the requested port doesn't exist
	PortNotFound
	// InvalidSerialPort the requested port is not a serial port
	InvalidSerialPort
	// PermissionDenied the user doesn't have enough priviledges
	PermissionDenied
	// InvalidSpeed the requested speed is not valid or not supported
	InvalidSpeed
	// InvalidDataBits the number of data bits is not valid or not supported
	InvalidDataBits
	// InvalidParity the selected parity is not valid or not supported
	InvalidParity
	// InvalidStopBits the selected number of stop bits is not valid or not supported
	InvalidStopBits
	// InvalidTimeoutValue the timeout value is not valid or not supported
	InvalidTimeoutValue
	// ErrorEnumeratingPorts an error occurred while listing serial port
	ErrorEnumeratingPorts
	// PortClosed the port has been closed while the operation is in progress
	PortClosed
	// FunctionNotImplemented the requested function is not implemented
	FunctionNotImplemented
)

type StopBits 

type StopBits int

StopBits describe a serial port stop bits setting 

const (
	// OneStopBit sets 1 stop bit (default)
	OneStopBit StopBits = iota
	// OnePointFiveStopBits sets 1.5 stop bits
	OnePointFiveStopBits
	// TwoStopBits sets 2 stop bits
	TwoStopBits
)

Source Files

View all Source files

Directories

Path Synopsis
Package enumerator is a golang cross-platform library for USB serial port discovery.
 Package enumerator is a golang cross-platform library for USB serial port discovery.
portlist is a tool to list all the available serial ports.
 portlist is a tool to list all the available serial ports.

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.