model

package
v0.10.1 Latest Latest
Warning

This package is not in the latest version of its module.

 Go to latest Published: Aug 13, 2019 License: Apache-2.0 Imports: 20 Imported by: 0

Documentation

Index

Constants

View Source 
const (
	SailSecretKey = "Secret"
	SailRoomIDKey = "room_id"
)
View Source 
const BuildHistoryLimit = 2
View Source 
const BuildReasonNone = BuildReason(0)
View Source 
const DefaultSailPort = 10450
View Source 
const OrchestratorDC = Orchestrator("DockerCompose")
View Source 
const OrchestratorK8s = Orchestrator("Kubernetes")
View Source 
const OrchestratorUnknown = Orchestrator("")
View Source 
const UnresourcedYAMLManifestName = ManifestName("uncategorized")

TODO(maia): throw an error if you try to name a manifest this in your Tiltfile?

Variables

This section is empty.

Functions

func ChangesInvalidateBuild 

func ChangesInvalidateBuild(old, new Manifest) bool

ChangesInvalidateBuild checks whether the changes from old => new manifest invalidate our build of the old one; i.e. if we're replacing `old` with `new`, should we perform a full rebuild?

func DeepEqual 

func DeepEqual(x, y interface{}) bool

func ImageTargetsByID 

func ImageTargetsByID(iTargets []ImageTarget) map[TargetID]ImageTarget

func MakeTargetMap 

func MakeTargetMap(targets []TargetSpec) map[TargetID]TargetSpec

Map all the targets by their target ID.

func NewRelativeFileOrChildMatcher 

func NewRelativeFileOrChildMatcher(baseDir string, paths ...string) fileOrChildMatcher

NewRelativeFileOrChildMatcher returns a matcher for the given paths (with any relative paths converted to absolute, relative to the given baseDir).

func NewSimpleFileMatcher 

func NewSimpleFileMatcher(paths ...string) (fileMatcher, error)

NewSimpleFileMatcher returns a matcher for the given paths; any relative paths are converted to absolute (relative to cwd).

func TargetIDSet 

func TargetIDSet(tids []TargetID) map[TargetID]bool

func TimestampPrefix 

func TimestampPrefix(ts time.Time) []byte

func UnrecognizedSailModeError 

func UnrecognizedSailModeError(v string) error

func UnrecognizedWebModeError 

func UnrecognizedWebModeError(v string) error

Types

type BuildDetails 

type BuildDetails interface {
	// contains filtered or unexported methods
}

type BuildReason 

type BuildReason int
const (
	BuildReasonFlagChangedFiles BuildReason = 1 << iota
	BuildReasonFlagConfig

	// See comments on NeedsRebuildFromCrash
	BuildReasonFlagCrash

	BuildReasonFlagInit
)

func (BuildReason) Has 

func (r BuildReason) Has(flag BuildReason) bool

func (BuildReason) IsCrashOnly 

func (r BuildReason) IsCrashOnly() bool

func (BuildReason) With 

func (r BuildReason) With(flag BuildReason) BuildReason

type BuildRecord 

type BuildRecord struct {
	Edits      []string
	Error      error
	Warnings   []string
	StartTime  time.Time
	FinishTime time.Time // IsZero() == true for in-progress builds
	Reason     BuildReason
	Log        Log `testdiff:"ignore"`
}

func (BuildRecord) Duration 

func (bs BuildRecord) Duration() time.Duration

func (BuildRecord) Empty 

func (bs BuildRecord) Empty() bool

type Cmd 

type Cmd struct {
	Argv []string
}

func ToShellCmd 

func ToShellCmd(cmd string) Cmd

func ToShellCmds 

func ToShellCmds(cmds []string) []Cmd

func TrySquash 

func TrySquash(runs []Cmd) []Cmd

func (Cmd) Empty 

func (c Cmd) Empty() bool

func (Cmd) EntrypointStr 

func (c Cmd) EntrypointStr() string

func (Cmd) IsShellStandardForm 

func (c Cmd) IsShellStandardForm() bool

func (Cmd) RunStr 

func (c Cmd) RunStr() string

func (Cmd) ShellStandardScript 

func (c Cmd) ShellStandardScript() string

Get the script when the shell is in standard form. Panics if the command is not in shell standard form.

func (Cmd) String 

func (c Cmd) String() string

type CompositePathMatcher 

type CompositePathMatcher struct {
	Matchers []PathMatcher
}

func (CompositePathMatcher) Matches 

func (c CompositePathMatcher) Matches(f string) (bool, error)

func (CompositePathMatcher) MatchesEntireDir 

func (c CompositePathMatcher) MatchesEntireDir(f string) (bool, error)

type CustomBuild 

type CustomBuild struct {
	Command string
	// Deps is a list of file paths that are dependencies of this command.
	Deps []string

	// Optional: tag we expect the image to be built with (we use this to check that
	// the expected image+tag has been created).
	// If empty, we create an expected tag at the beginning of CustomBuild (and
	// export $EXPECTED_REF=name:expected_tag )
	Tag string

	Fast        FastBuild
	LiveUpdate  LiveUpdate // Optionally, can use LiveUpdate to update this build in place.
	DisablePush bool
}

func (CustomBuild) WithTag 

func (cb CustomBuild) WithTag(t string) CustomBuild

type DeployID 

type DeployID int64 // Unix ns after epoch -- uniquely identify a deploy

func NewDeployID 

func NewDeployID() DeployID

func (DeployID) Empty 

func (dID DeployID) Empty() bool

func (DeployID) String 

func (dID DeployID) String() string

type DockerBuild 

type DockerBuild struct {
	Dockerfile string
	BuildPath  string // the absolute path to the files
	BuildArgs  DockerBuildArgs
	FastBuild  FastBuild  // Optionally, can use FastBuild to update this build in place.
	LiveUpdate LiveUpdate // Optionally, can use LiveUpdate to update this build in place.
}

type DockerBuildArgs 

type DockerBuildArgs map[string]string

type DockerComposeTarget 

type DockerComposeTarget struct {
	Name        TargetName
	ConfigPaths []string

	YAMLRaw []byte // for diff'ing when config files change
	DfRaw   []byte // for diff'ing when config files change
	// contains filtered or unexported fields
}

func ExtractDockerComposeTargets 

func ExtractDockerComposeTargets(specs []TargetSpec) []DockerComposeTarget

func (DockerComposeTarget) Dependencies 

func (t DockerComposeTarget) Dependencies() []string

TODO(nick): This method should be deleted. We should just de-dupe and sort LocalPaths once when we create it, rather than have a duplicate method that does the "right" thing.

func (DockerComposeTarget) DependencyIDs 

func (t DockerComposeTarget) DependencyIDs() []TargetID

func (DockerComposeTarget) Dockerignores 

func (t DockerComposeTarget) Dockerignores() []Dockerignore

func (DockerComposeTarget) Empty 

func (t DockerComposeTarget) Empty() bool

func (DockerComposeTarget) ID 

func (t DockerComposeTarget) ID() TargetID

func (DockerComposeTarget) IgnoredLocalDirectories 

func (t DockerComposeTarget) IgnoredLocalDirectories() []string

func (DockerComposeTarget) LocalPaths 

func (t DockerComposeTarget) LocalPaths() []string

func (DockerComposeTarget) LocalRepos 

func (t DockerComposeTarget) LocalRepos() []LocalGitRepo

func (DockerComposeTarget) ManifestName 

func (t DockerComposeTarget) ManifestName() ManifestName

TODO(nick): This is a temporary hack until we figure out how we want to pass these IDs to the docker-compose UX.

func (DockerComposeTarget) PublishedPorts 

func (t DockerComposeTarget) PublishedPorts() []int

func (DockerComposeTarget) TiltFilename 

func (t DockerComposeTarget) TiltFilename() string

func (DockerComposeTarget) Validate 

func (dc DockerComposeTarget) Validate() error

func (DockerComposeTarget) WithBuildPath 

func (t DockerComposeTarget) WithBuildPath(buildPath string) DockerComposeTarget

func (DockerComposeTarget) WithDependencyIDs 

func (t DockerComposeTarget) WithDependencyIDs(ids []TargetID) DockerComposeTarget

func (DockerComposeTarget) WithDockerignores 

func (t DockerComposeTarget) WithDockerignores(dockerignores []Dockerignore) DockerComposeTarget

func (DockerComposeTarget) WithIgnoredLocalDirectories 

func (t DockerComposeTarget) WithIgnoredLocalDirectories(dirs []string) DockerComposeTarget

func (DockerComposeTarget) WithPublishedPorts 

func (t DockerComposeTarget) WithPublishedPorts(ports []int) DockerComposeTarget

func (DockerComposeTarget) WithRepos 

func (t DockerComposeTarget) WithRepos(repos []LocalGitRepo) DockerComposeTarget

func (DockerComposeTarget) WithTiltFilename 

func (t DockerComposeTarget) WithTiltFilename(f string) DockerComposeTarget

type Dockerignore 

type Dockerignore struct {
	// The path to evaluate the dockerignore contents relative to
	LocalPath string
	Contents  string
}

type FastBuild 

type FastBuild struct {
	BaseDockerfile string
	Syncs          []Sync
	Runs           []Run
	Entrypoint     Cmd

	// A HotReload container image knows how to automatically
	// reload any changes in the container. No need to restart it.
	HotReload bool
}

func (FastBuild) Empty 

func (fb FastBuild) Empty() bool

type ImageTarget 

type ImageTarget struct {
	ConfigurationRef container.RefSelector
	DeploymentRef    reference.Named
	BuildDetails     BuildDetails
	MatchInEnvVars   bool

	// User-supplied command to run when the container runs
	// (i.e. overrides k8s yaml "command", container ENTRYPOINT, etc.)
	OverrideCmd Cmd
	// contains filtered or unexported fields
}

func ExtractImageTargets 

func ExtractImageTargets(specs []TargetSpec) []ImageTarget

func NewImageTarget 

func NewImageTarget(ref container.RefSelector) ImageTarget

func (ImageTarget) AnyFastBuildInfo 

func (i ImageTarget) AnyFastBuildInfo() FastBuild

func (ImageTarget) AnyLiveUpdateInfo 

func (i ImageTarget) AnyLiveUpdateInfo() LiveUpdate

func (ImageTarget) CachePaths 

func (i ImageTarget) CachePaths() []string

func (ImageTarget) CustomBuildInfo 

func (i ImageTarget) CustomBuildInfo() CustomBuild

func (ImageTarget) Dependencies 

func (i ImageTarget) Dependencies() []string

TODO(nick): This method should be deleted. We should just de-dupe and sort LocalPaths once when we create it, rather than have a duplicate method that does the "right" thing.

func (ImageTarget) DependencyIDs 

func (i ImageTarget) DependencyIDs() []TargetID

func (ImageTarget) DockerBuildInfo 

func (i ImageTarget) DockerBuildInfo() DockerBuild

func (ImageTarget) Dockerignores 

func (i ImageTarget) Dockerignores() []Dockerignore

func (ImageTarget) ID 

func (i ImageTarget) ID() TargetID

func (ImageTarget) IgnoredLocalDirectories 

func (i ImageTarget) IgnoredLocalDirectories() []string

func (ImageTarget) IsCustomBuild 

func (i ImageTarget) IsCustomBuild() bool

func (ImageTarget) IsDockerBuild 

func (i ImageTarget) IsDockerBuild() bool

func (ImageTarget) IsFastBuild 

func (i ImageTarget) IsFastBuild() bool

IsFastBuild checks if the TOP LEVEL BUILD DETAILS are for a FastBuild. (If this target is a DockerBuild || CustomBuild with a nested FastBuild, returns FALSE.)

func (ImageTarget) LocalPaths 

func (i ImageTarget) LocalPaths() []string

func (ImageTarget) LocalRepos 

func (i ImageTarget) LocalRepos() []LocalGitRepo

func (ImageTarget) TiltFilename 

func (i ImageTarget) TiltFilename() string

func (ImageTarget) TopFastBuildInfo 

func (i ImageTarget) TopFastBuildInfo() FastBuild

FastBuildInfo returns the TOP LEVEL BUILD DETAILS, if a FastBuild. Does not return nested FastBuild details.

func (ImageTarget) Validate 

func (i ImageTarget) Validate() error

func (ImageTarget) WithBuildDetails 

func (i ImageTarget) WithBuildDetails(details BuildDetails) ImageTarget

func (ImageTarget) WithCachePaths 

func (i ImageTarget) WithCachePaths(paths []string) ImageTarget

func (ImageTarget) WithDependencyIDs 

func (i ImageTarget) WithDependencyIDs(ids []TargetID) ImageTarget

func (ImageTarget) WithDockerignores 

func (i ImageTarget) WithDockerignores(dockerignores []Dockerignore) ImageTarget

func (ImageTarget) WithOverrideCommand 

func (i ImageTarget) WithOverrideCommand(cmd Cmd) ImageTarget

func (ImageTarget) WithRepos 

func (i ImageTarget) WithRepos(repos []LocalGitRepo) ImageTarget

func (ImageTarget) WithTiltFilename 

func (i ImageTarget) WithTiltFilename(f string) ImageTarget

type K8sTarget 

type K8sTarget struct {
	Name         TargetName
	YAML         string
	PortForwards []PortForward
	// labels for pods that we should watch and associate with this resource
	ExtraPodSelectors []labels.Selector

	// Each K8s entity should have a display name for user interfaces
	// that balances brevity and uniqueness
	DisplayNames []string
	// contains filtered or unexported fields
}

func ExtractK8sTargets 

func ExtractK8sTargets(specs []TargetSpec) []K8sTarget

func (K8sTarget) AppendYAML 

func (k8s K8sTarget) AppendYAML(y string) K8sTarget

func (K8sTarget) DependencyIDs 

func (k8s K8sTarget) DependencyIDs() []TargetID

func (K8sTarget) Empty 

func (k8s K8sTarget) Empty() bool

func (K8sTarget) ID 

func (k8s K8sTarget) ID() TargetID

func (K8sTarget) RefInjectCounts 

func (k8s K8sTarget) RefInjectCounts() map[string]int

func (K8sTarget) Validate 

func (k8s K8sTarget) Validate() error

func (K8sTarget) WithDependencyIDs 

func (k8s K8sTarget) WithDependencyIDs(ids []TargetID) K8sTarget

func (K8sTarget) WithRefInjectCounts 

func (k8s K8sTarget) WithRefInjectCounts(ric map[string]int) K8sTarget

type LabelPair 

type LabelPair struct {
	Key   string
	Value string
}

func ToLabelPairs 

func ToLabelPairs(m map[string]string) []LabelPair

type LiveUpdate 

type LiveUpdate struct {
	Steps   []LiveUpdateStep
	BaseDir string // directory where the LiveUpdate was initialized (we'll use this to eval. any relative paths)
}

Specifies how to update a running container.

  1. If any paths specified in a FallBackOn step have changed, fall back to an image build (i.e. don't do a LiveUpdate)
  2. If there are Sync steps in `Steps`, files will be synced as specified.
  3. Any time we sync one or more files, all Run and RestartContainer steps will be evaluated.

func NewLiveUpdate 

func NewLiveUpdate(steps []LiveUpdateStep, baseDir string) (LiveUpdate, error)

func (LiveUpdate) Empty 

func (lu LiveUpdate) Empty() bool

func (LiveUpdate) FallBackOnFiles 

func (lu LiveUpdate) FallBackOnFiles() PathSet

FallBackOnFiles returns a PathSet of files which, if any have changed, indicate that we should fall back to an image build.

func (LiveUpdate) RunSteps 

func (lu LiveUpdate) RunSteps() []Run

func (LiveUpdate) ShouldRestart 

func (lu LiveUpdate) ShouldRestart() bool

func (LiveUpdate) SyncSteps 

func (lu LiveUpdate) SyncSteps() []Sync

type LiveUpdateFallBackOnStep 

type LiveUpdateFallBackOnStep struct {
	Files []string
}

Specifies that changes to any of the given files should cause the builder to fall back (i.e. do a full image build)

type LiveUpdateRestartContainerStep 

type LiveUpdateRestartContainerStep struct{}

Specifies that the container should be restarted when any files in `Sync` steps have changed.

type LiveUpdateRunStep 

type LiveUpdateRunStep struct {
	Command  Cmd
	Triggers PathSet
}

Specifies that `Command` should be executed when any files in `Sync` steps have changed If `Trigger` is non-empty, `Command` will only be executed when the local paths of changed files covered by at least one `Sync` match one of `PathSet.Paths` (evaluated relative to `PathSet.BaseDirectory`.

type LiveUpdateStep 

type LiveUpdateStep interface {
	// contains filtered or unexported methods
}

type LiveUpdateSyncStep 

type LiveUpdateSyncStep struct {
	Source, Dest string
}

Specifies that changes to local path `Source` should be synced to container path `Dest`

type LocalGitRepo 

type LocalGitRepo struct {
	LocalPath string
}

func (LocalGitRepo) IsRepo 

func (LocalGitRepo) IsRepo()

type Log 

type Log struct {
	// contains filtered or unexported fields
}

func AppendLog 

func AppendLog(l Log, le LogEvent, timestampsEnabled bool, prefix string) Log

Returns a new instance of `Log` with content equal to `b` appended to the end of `l` Performs truncation off the start of the log (at a newline) to ensure the resulting log is not longer than `maxLogLengthInBytes`. (which maybe means a pedant would say this isn't strictly an `append`?)

func NewLog 

func NewLog(s string) Log

func (Log) Empty 

func (l Log) Empty() bool

func (Log) Len 

func (l Log) Len() int

func (Log) MarshalJSON 

func (l Log) MarshalJSON() ([]byte, error)

func (Log) String 

func (l Log) String() string

func (Log) Tail 

func (l Log) Tail(n int) Log

Get at most N lines from the tail of the log.

type LogEvent 

type LogEvent interface {
	Message() []byte
	Time() time.Time
}

type Manifest 

type Manifest struct {
	// Properties for all manifests.
	Name ManifestName

	// Info needed to build an image. (This struct contains details of DockerBuild, FastBuild... etc.)
	ImageTargets []ImageTarget

	// How updates are triggered:
	// - automatically, when we detect a change
	// - manually, when the user tells us to
	TriggerMode TriggerMode
	// contains filtered or unexported fields
}

NOTE: If you modify Manifest, make sure to modify `Manifest.Equal` appropriately

func (Manifest) DependencyIDs 

func (m Manifest) DependencyIDs() []TargetID

func (Manifest) DeployTarget 

func (m Manifest) DeployTarget() TargetSpec

func (Manifest) DockerComposeTarget 

func (m Manifest) DockerComposeTarget() DockerComposeTarget

func (Manifest) Empty 

func (m Manifest) Empty() bool

func (Manifest) Equal 

func (m1 Manifest) Equal(m2 Manifest) bool

func (Manifest) ID 

func (m Manifest) ID() TargetID

func (Manifest) ImageTargetAt 

func (m Manifest) ImageTargetAt(i int) ImageTarget

func (Manifest) IsDC 

func (m Manifest) IsDC() bool

func (Manifest) IsImageDeployed 

func (m Manifest) IsImageDeployed(iTarget ImageTarget) bool

func (Manifest) IsK8s 

func (m Manifest) IsK8s() bool

func (Manifest) IsUnresourcedYAMLManifest 

func (m Manifest) IsUnresourcedYAMLManifest() bool

func (Manifest) K8sTarget 

func (m Manifest) K8sTarget() K8sTarget

func (Manifest) LocalPaths 

func (m Manifest) LocalPaths() []string

func (Manifest) ManifestName 

func (m Manifest) ManifestName() ManifestName

func (Manifest) TargetSpecs 

func (m Manifest) TargetSpecs() []TargetSpec

func (Manifest) Validate 

func (m Manifest) Validate() error

func (Manifest) WithDeployTarget 

func (m Manifest) WithDeployTarget(t TargetSpec) Manifest

func (Manifest) WithImageTarget 

func (m Manifest) WithImageTarget(iTarget ImageTarget) Manifest

func (Manifest) WithImageTargets 

func (m Manifest) WithImageTargets(iTargets []ImageTarget) Manifest

func (Manifest) WithTriggerMode 

func (m Manifest) WithTriggerMode(mode TriggerMode) Manifest

type ManifestName 

type ManifestName string

TODO(nick): We should probably get rid of ManifestName completely and just use TargetName everywhere.

func (ManifestName) String 

func (m ManifestName) String() string

func (ManifestName) TargetName 

func (m ManifestName) TargetName() TargetName

type NoBrowser 

type NoBrowser bool // flag for disabling automatic browser opening

type Orchestrator 

type Orchestrator string

The current orchestrator we're running with (K8s or DockerCompose)

type PathMatcher 

type PathMatcher interface {
	Matches(f string) (bool, error)

	// If this matches the entire dir, we can often optimize filetree walks a bit
	MatchesEntireDir(file string) (bool, error)
}
var EmptyMatcher PathMatcher = emptyMatcher{}

func NewCompositeMatcher 

func NewCompositeMatcher(matchers []PathMatcher) PathMatcher

type PathSet 

type PathSet struct {
	Paths         []string
	BaseDirectory string
}

A PathSet stores one or more filepaths, along with the directory that any relative paths are relative to NOTE(maia): in its current usage (for LiveUpdate.Run.Triggers, LiveUpdate.FallBackOnFiles()) this isn't strictly necessary, could just as easily convert paths to Abs when specified in the Tiltfile--but leaving this code in place for now because it was already written and may help with complicated future cases (glob support, etc.)

func NewPathSet 

func NewPathSet(paths []string, baseDir string) PathSet

func (PathSet) AnyMatch 

func (ps PathSet) AnyMatch(paths []string) (bool, string, error)

AnyMatch returns true if any of the given filepaths match any paths contained in the pathset (along with the first path that matched).

func (PathSet) Empty 

func (ps PathSet) Empty() bool

type PortForward 

type PortForward struct {
	// The port to expose on localhost of the current machine.
	LocalPort int

	// The port to connect to inside the deployed container.
	// If 0, we will connect to the first containerPort.
	ContainerPort int
}

type RoomID 

type RoomID string

type Run 

type Run struct {
	// Required. The command to run.
	Cmd Cmd
	// Optional. If not specified, this command runs on every change.
	// If specified, we only run the Cmd if the changed file matches a trigger.
	Triggers PathSet
}

func ToRun 

func ToRun(cmd Cmd) Run

func ToRuns 

func ToRuns(cmds []Cmd) []Run

func (Run) WithTriggers 

func (r Run) WithTriggers(paths []string, baseDir string) Run

type SailMode 

type SailMode string

Mode for developing Tilt against the Sail server.

Currently controls whether we use a local instance or the production instance. 

const (
	SailModeDefault SailMode = "default"

	SailModeDisabled SailMode = "none"

	// Local sail server on localhost:10350
	SailModeLocal SailMode = "local"

	// Remote sail server on sail-staging.tilt.dev. Useful for testing SSL.
	// Always uses precompiled JS, because one of the things we want to test
	// with sail-staging is the JS at head (rather than testing the production JS).
	SailModeStaging SailMode = "staging"

	// Production sail server at sail.tilt.dev.
	// Serves production JS according to the version of Tilt that opened the room.
	SailModeProd SailMode = "prod"
)

func (*SailMode) IsEnabled 

func (m *SailMode) IsEnabled() bool

func (*SailMode) Set 

func (m *SailMode) Set(v string) error

func (*SailMode) String 

func (m *SailMode) String() string

func (*SailMode) Type 

func (m *SailMode) Type() string

type SailNewRoomRequest 

type SailNewRoomRequest struct {
	WebVersion WebVersion `json:"web_version"`
}

type SailPort 

type SailPort int

type SailRoomInfo 

type SailRoomInfo struct {
	RoomID RoomID `json:"room_id"`
	Secret string `json:"secret"`
}

type SailURL 

type SailURL url.URL

func (SailURL) Empty 

func (u SailURL) Empty() bool

func (SailURL) Hostname 

func (u SailURL) Hostname() string

func (SailURL) Http 

func (u SailURL) Http() SailURL

func (SailURL) String 

func (u SailURL) String() string

func (SailURL) WithQueryParam 

func (u SailURL) WithQueryParam(key, value string) SailURL

func (SailURL) Ws 

func (u SailURL) Ws() SailURL

type Sync 

type Sync struct {
	LocalPath     string
	ContainerPath string
}

type Target 

type Target interface {
	Spec() TargetSpec
	Status() TargetStatus
}

type TargetGraph 

type TargetGraph struct {
	// contains filtered or unexported fields
}

func NewTargetGraph 

func NewTargetGraph(targets []TargetSpec) (TargetGraph, error)

func (TargetGraph) DeployedImages 

func (g TargetGraph) DeployedImages() []ImageTarget

Returns all the images in the graph that are directly deployed to a container.

func (TargetGraph) DepsOf 

func (g TargetGraph) DepsOf(t TargetSpec) ([]TargetSpec, error)

Return the direct dependency targets.

func (TargetGraph) Images 

func (g TargetGraph) Images() []ImageTarget

func (TargetGraph) IsDeployedImage 

func (g TargetGraph) IsDeployedImage(iTarget ImageTarget) bool

Is this image directly deployed a container?

func (TargetGraph) IsSingleSourceDAG 

func (g TargetGraph) IsSingleSourceDAG() bool

In Tilt, Manifests should always be DAGs with a single root node (the deploy target). This is just a quick sanity check to make sure that's true, because many of our graph-traversal algorithms won't work if it's not true.

func (TargetGraph) VisitTree 

func (g TargetGraph) VisitTree(root TargetSpec, visit func(dep TargetSpec) error) error

Visit t and its transitive dependencies in post-order (aka depth-first)

type TargetID 

type TargetID struct {
	Type TargetType
	Name TargetName
}

func DedupeTargetIDs 

func DedupeTargetIDs(ids []TargetID) []TargetID

De-duplicate target ids, maintaining the same order.

func ImageID 

func ImageID(ref container.RefSelector) TargetID

func (TargetID) Empty 

func (id TargetID) Empty() bool

func (TargetID) String 

func (id TargetID) String() string

type TargetName 

type TargetName string

func (TargetName) String 

func (n TargetName) String() string

type TargetSpec 

type TargetSpec interface {
	ID() TargetID

	// Check to make sure the spec is well-formed.
	// All TargetSpecs should throw an error in the case where the ID is empty.
	Validate() error

	DependencyIDs() []TargetID
}

func TopologicalSort 

func TopologicalSort(targets []TargetSpec) ([]TargetSpec, error)

Create a topologically sorted list of targets. Returns an error if the targets can't be topologically sorted. (e.g., there's a cycle).

type TargetStatus 

type TargetStatus interface {
	TargetID() TargetID
	ActiveBuild() BuildRecord
	LastBuild() BuildRecord
}

type TargetType 

type TargetType string
const (
	// Deployed k8s entities
	TargetTypeK8s TargetType = "k8s"

	// Image builds
	// TODO(nick): It might make sense to represent FastBuild and normal Docker builds
	// as separate types.
	TargetTypeImage TargetType = "image"

	// Docker-compose service build and deploy
	// TODO(nick): Currently, build and deploy are represented as a single target.
	// In the future, we might have a separate build target and deploy target.
	TargetTypeDockerCompose TargetType = "docker-compose"

	// Aggregation of multiple targets into one UI view.
	// TODO(nick): Currenly used as the type for both Manifest and YAMLManifest, though
	// we expect YAMLManifest to go away.
	TargetTypeManifest TargetType = "manifest"

	// Changes that affect all targets, rebuilding the target graph.
	TargetTypeConfigs TargetType = "configs"
)

type TiltBuild 

type TiltBuild struct {
	// Version w/o leading "v"
	Version string
	Date    string
	Dev     bool
}

Information on a build of the Tilt binary

func (TiltBuild) AnalyticsVersion 

func (b TiltBuild) AnalyticsVersion() string

func (TiltBuild) Empty 

func (b TiltBuild) Empty() bool

func (TiltBuild) WebVersion 

func (b TiltBuild) WebVersion() WebVersion

type TriggerMode 

type TriggerMode int
const (
	// Automatically, whenever we detect a change, or
	TriggerModeAuto TriggerMode = iota
	// Manually (i.e. only when the user tells us to update)
	TriggerModeManual
)

How builds are triggered (per manifest or globally):

type WebDevPort 

type WebDevPort int

type WebMode 

type WebMode string
const (
	// By default, we serve the js locally in dev builds and from prod in released
	// builds.
	DefaultWebMode WebMode = "default"

	// Local webpack server
	LocalWebMode WebMode = "local"

	// Prod gcloud bucket
	ProdWebMode WebMode = "prod"

	// Precompiled with `make build-js`. This is an experimental mode
	// we're playing around with to avoid the cost of webpack startup.
	PrecompiledWebMode WebMode = "precompiled"
)

func (*WebMode) Set 

func (m *WebMode) Set(v string) error

func (*WebMode) String 

func (m *WebMode) String() string

func (*WebMode) Type 

func (m *WebMode) Type() string

type WebPort 

type WebPort int

type WebURL 

type WebURL url.URL

func (WebURL) Empty 

func (u WebURL) Empty() bool

func (WebURL) String 

func (u WebURL) String() string

type WebVersion 

type WebVersion string

Web version of the form vA.B.C, where A, B, and C are integers. Used for fetching web assets

Source Files

View all Source files

Jump to

Keyboard shortcuts

? : This menu
/ : Search site
f or F : Jump to
y or Y : Canonical URL
go.dev uses cookies from Google to deliver and enhance the quality of its services and to analyze traffic. Learn more.