forsgren

README

forsgren

Measure the five DORA metrics for a set of GitHub repositories, from GitHub data, and publish them as a small static status page.

Named after Dr. Nicole Forsgren, whose research with DORA (and the book Accelerate, with Jez Humble and Gene Kim) defined the first four of these metrics.

The five metrics

Metric	Question it answers
Deployment frequency	How often do we ship to users?
Change lead time	How long from a commit to that commit reaching users?
Change failure rate	What share of deployments causes a failure users hit?
Failed deployment recovery time	When a deployment fails and needs immediate intervention, how long until a successful one recovers it?
Deployment rework rate	What share of deployments is unplanned, made to fix a problem users hit?

How it gets its data

forsgren reads only what is already in GitHub:

• Deployments: workflow runs (for example a TestFlight upload) and GitHub Deployments, with their commit and end time. Failed deployment recovery time comes from these alone, the failed ones and the successes after them (see Failed deployment recovery time).

• Failures, for change fail rate (forsgren#18): issues labelled failure, and the failed deployments. Each issue carries a short record block in its body:

  failure-start: 2030-04-01T09:30+02:00
  failed-build: 12.345
  fixed-build: 12.346
  

  failure-start is when users were first hit; the two builds name the deployment that caused the failure and the one that fixed it. forsgren stores the issue's opening and closing times and its failure-start; an issue without a failure-start it can read is stored all the same and named on stderr by collect, never silently skipped (see Collecting deployments, The failure issues). The builds are not used yet.

What it produces

• the current value of each metric, per service
• a history file, so each metric can be shown as a trend
• a static page with the current numbers and a trend chart per metric, safe to publish: numbers and dates only, no issue titles, no links into private repositories

Where configuration and data live

Not in this repository. It holds code only. An installation keeps its configuration (which repositories and services, workflow names, labels, the health URL) and its data (data/deployments.csv, the deployments fetched from GitHub, data/commits.csv, their commits, data/failures.csv, the failure issues, and data/issues.csv, what happened to every issue) in a separate private data repository, made from a template, and passes them to forsgren as paths. Test fixtures are made up (acme/app) and live only under testdata/.

The data guard (Scripts/check_data_guard.sh, a PRE gate) keeps it that way. Like the secret scan it is secret-class: a finding blocks the commit itself, not only the push, so the leak never enters history. Over the files git tracks, it fails when:

• a file that looks like installation config or data sits outside testdata/: anything under a top-level data/, deployments.csv, commits.csv, failures.csv, issues.csv, history.csv, *.history.csv, forsgren.config.*, forsgren-config.*, config.yml/.yaml/.json at any depth, or a *.jsonl events file.

Private names are not this gate's business: the private-names gate (Scripts/check_private_names.sh, below) searches every tracked and every untracked, not-ignored path and file for them.

The data guard does not check untracked files, so git add (or git add -N) a new file before running the gates; the private-names gate does check them.

History

The deployments forsgren collect finds are kept in the installation's data repository, in data/deployments.csv (the history format v1, package internal/history). It is plain CSV, one deployment per line, so the daily commit of data/ is a diff of added lines:

# forsgren history v1
project,repository,kind,name,deployment_id,commit,created_at,state,task
shop,acme/app,environment,production,1001,<40 hex>,2026-09-01T10:00:00Z,success,

• The first line states the format version, the second names the columns.
• kind is environment, workflow or release; name is the environment or workflow file (empty for a release); deployment_id is the ID at GitHub; created_at is UTC; state is the final state, success, failure or other (a deployment still running is stored once it has finished); task may be empty.

History is never overwritten. forsgren creates data/ and the file when it first stores history, with the version line. After that it only appends: a deployment already in the file (same repository, compared ignoring case as GitHub compares names, same kind and same ID) is skipped, so the first line stays even if GitHub says something else later, and no line is rewritten or removed. The new lines are written in one write and synced, after a newline if the last line lacked one. A file whose first line states another version, or with a line that is not in the format, is refused before anything is written: its bytes and modification time stay as they were, and the error names the line.

The commits of each deployment, for lead time (forsgren#16), are kept next to it in data/commits.csv, with its own format version (the commits format v1); data/deployments.csv does not change. collect writes it, always next to the --data file (see Collecting deployments, The commits of each deployment):

# forsgren commits v1
repository,kind,deployment_id,commit,authored_at,deployed_at
acme/app,environment,1001,<40 hex>,2026-09-01T09:00:00Z,2026-09-01T10:00:00Z

• One line per commit per deployment. repository, kind and deployment_id are the deployment's key in deployments.csv; authored_at is the commit's author date and deployed_at the deployment's created_at, copied so lead time needs no join. Both are UTC.
• The project and the task are not repeated: the project comes from the config, as for deployment frequency, and the task is the deployment's own.
• The same rules as deployments.csv: created with its version line, appended only, refused untouched when its version is unknown or a line is malformed. A commit already there for the same deployment (repository ignoring case, kind, ID and the same SHA) is skipped; a call with nothing new leaves the file alone.

The failure issues, for change fail rate (forsgren#18), are kept next to it in data/failures.csv, with its own format version (the failures format v1):

# forsgren failures v1
repository,issue,opened_at,closed_at,failure_start
acme/app,42,2026-09-01T10:00:00Z,,2026-09-01T09:30:00Z
acme/app,42,2026-09-01T10:00:00Z,2026-09-01T15:00:00Z,2026-09-01T09:30:00Z

• One line per state of an issue labelled failure: issue is its number, opened_at and closed_at its created_at and closed_at at GitHub (closed_at empty while it is open), failure_start its failure-start: line (empty when it has none forsgren can read). All are UTC.
• An issue changes after it is stored: it is closed, or reopened. The file still only grows, so an issue gets a new line whenever it differs from its newest line (key: repository, ignoring case, and issue number), and the newest line of an issue is the issue: above, issue 42 was stored open, then closed. An unchanged issue is not written again, and a call with nothing new leaves the file alone.
• Otherwise the same rules as deployments.csv: created with its version line, refused untouched when its version is unknown or a line is malformed.

The issue events, for the issues page (forsgren#76), are kept in data/issues.csv, with its own format version (the issues format v1). It holds every issue of a configured repository, whatever its labels, as one line per event:

# forsgren issues v1
repository,issue,event,reason,at
acme/app,7,created,,2026-09-01T10:00:00Z
acme/app,7,closed,not_planned,2026-09-01T13:00:00Z
acme/app,7,reopened,,2026-09-02T12:00:00Z

• event is created, closed or reopened. reason is GitHub's state_reason on a closed event, completed, not_planned or duplicate, and empty when GitHub gives none (an old issue) and on the other two events. at is UTC, to the second.
• Events, not states: a line is never revised, so a past day's counts never change after the fact. The file only grows; an event already there (repository ignoring case, issue number, event and time) is not written again, and a call with nothing new leaves the file alone. Lines are appended in time order within a call.
• Otherwise the same rules as deployments.csv: created with its version line, refused untouched when its version is unknown or a line is malformed, naming the line.

Deployment frequency

The first DORA number on the page (forsgren#12, step 7, package internal/metrics), the first column of the page's table (see The page): its DORA band, always shown with the count it comes from, "Between once per day and once per week · 12", the successful deployments of the last 30 days, or of the last 180 days for a band decided on them ("Between once per month and once every six months · 3"). The legend page says which.

What counts. A deployment is a history line with the state success; failure and other lines do not count. A line belongs to the project whose config lists its repository (names compared ignoring case, as the config does); a repository no project lists any more is left out. A repository that deploys several services counts every deploy on its own; a split per service is forsgren#11.

The windows are counted back from the render time, in UTC, in days of 24 hours: a deployment counts when it was created at or after the render time minus 7 (30, 180) days, and not after the render time. A deployment exactly 7 days old is in the 7-day count.

The bands are the six deployment-frequency answers of the current DORA Quick Check (forsgren#16, step 6), word for word, as mutually exclusive ranges. The Quick Check asks people how often they deploy; forsgren counts, and maps a count by its average time between deployments, on the same edges as lead time's bands: an hour, a day, 7 days, a month of 30 days and six months of 180 days. A band "between once per X and once per Y" holds Y and not X, so exactly once a month (1 in 30 days) is between once per week and once per month. The 30-day count decides whenever it holds a deployment; only with none in 30 days does the 180-day count tell the two slowest bands apart:

Count	DORA band
241 and more in 30 days (more than once an hour over an 8-hour day)	On demand (multiple deploys per day)
30 to 240 in 30 days	Between once per hour and once per day
5 to 29 in 30 days (once a week is 30/7, about 4.3)	Between once per day and once per week
1 to 4 in 30 days	Between once per week and once per month
none in 30 days, 1 and more in 180 days	Between once per month and once every six months
none in 180 days	Less than once per six months

Once an hour over a working day is working_hours × 30 deployments in 30 days (8 × 30 = 240 with the default 8), so on demand is more than that (forsgren#69, #71); the legend page states the configured day and the numbers that follow from it. A row whose first successful deployment is less than 30 days old (the project total: its earliest) has not had a whole window to deploy in, so its band uses its 30-day count scaled to 30 days: the count × 30 over its age in whole days, at least 1 (19 in 9 days count as 63). The count shown, and the numbers view, stay the plain count.

The band describes throughput over the period, not regularity; the count makes a burst visible (Yves's ruling on forsgren#12), so the band is never shown without it, and neither the 30-day nor the 180-day count has a row of its own.

A row with no deployment in its history, successful or failed, says "No deployments recorded yet" across its five columns. A row whose deployments all failed is shown in full, so the worst case never looks like no data (Yves's ruling on decision #35): its frequency is "Less than once per six months · 0", since it counts successes.

Lead time for changes

The second DORA number on the page (forsgren#16, steps 4 and 5, package internal/metrics): how long a change takes from its commit to running in production. The table's second column shows it as a DORA band with the median and, in brackets, the commits of the last 30 days: "Less than one hour · 17 min (37)". A row that has deployments but no commit deployed in the last 30 days says "No lead time yet".

What counts. render reads data/commits.csv next to its --data file, the commits collect stored for each successful deployment (see History). A missing file is no commit; a file with an unknown version or a malformed line fails the render with its own message. Yves's rulings:

• Per commit, DORA's definition: each commit's lead time runs from its author date to the creation time of the successful deployment that shipped it.
• The commits of a deployment are those since the previous successful deployment of its stream: the same repository, rule, environment or workflow, and task, while a repository's releases are one stream (see Collecting deployments, The commits of each deployment). The first success of a stream has none. Failed deployments, and other final states, store none: their commits move on to the next successful one. A success collect skips, with a warning, stores none either.
• The window: a commit counts when its deployment was created in the last 30 days, counted back from the render time in UTC, both ends included, as for deployment frequency. A commit belongs to the project whose config lists its repository, compared ignoring case. A commit shipped by two deployments (two tasks of one repository) counts once for each.
• The median, as DORA reports it, because lead times are not normally distributed: a few old commits would drag a mean far from the typical change. For an even count it is the mean of the two middle lead times.
• A negative lead time (a commit authored after its deployment: a skewed clock, or an author date set by hand) counts as 0. The commit did ship, so dropping it would lose a real change from the count, and 0 is the nearest possible value.

The duration is written in whole minutes below an hour ("17 minutes", "less than a minute" below one), hours and minutes below a day ("5 hours 12 minutes"), days and hours above ("3 days 4 hours"). Each part is cut down, never rounded up, so a median never reads as the next band's edge; a zero second part is left out.

The bands are the six of the current DORA Quick Check, as mutually exclusive ranges of the median. A month is 30 days and six months 180 days, so every edge is a fixed duration (the page says so too):

Median lead time	DORA band
below 1 hour	Less than one hour
1 hour to below 24 hours	Less than one day
24 hours to below 7 days	One day to one week
7 days to below 30 days	One week to one month
30 days to below 180 days	One to six months
180 days and more	More than six months

The page calls them DORA bands, never Elite, High, Medium or Low.

Failed deployment recovery time

The third DORA number on the page (forsgren#17, package internal/metrics): DORA's "time it takes to recover from a deployment that fails and requires immediate intervention". The table's third column shows it as a DORA band with the median and, in brackets, the recoveries of the last 30 days: "Less than one day · 3 h (2)", followed by " · 1 recovery not completed yet" when a stream's latest deployments failed; with none recovered in the window but one not completed yet, "— · 1 recovery not completed yet", the dash for the band and the median it does not have yet; with neither, "No failed deployments". The unit is the recovery, one per run of failures however many deployments failed in it (Yves's ruling on decision #35), never a failed deployment.

What counts. Rulings on forsgren#17, taken while Yves was away (each can be reverted there):

• Deployments only. A failure is a line of data/deployments.csv whose state is failure. The web-hosting and TestFlight recorders record a failure only once live was touched, which is DORA's "requires immediate intervention". A workflow= rule stores every run that concluded failure (see Collecting deployments), so for such a repository a run that failed before touching live counts too. Failure issues (the failure label with its record block, see How it gets its data) are the source of change fail rate (forsgren#18), not of this number.
• Recovered by the next success of its stream. The stream is collect's (see Collecting deployments, The commits of each deployment): the same repository, compared ignoring case, the same kind, environment or workflow, and task; a repository's releases are one stream. A success of another stream (deploy-admin after a failed deploy-api) recovers nothing. Deployments are taken oldest first, by created_at, then ID.
• The time runs from the failed deployment's created_at to the success's created_at.
• A run of failures (failures one after the other in a stream, before a success) is one recovery, timed from the first failure of the run, since the service was degraded from then on. A deployment in the state other neither starts nor ends a run.
• Not recovered yet: a run with no success after it yet. It is counted ("1 recovery not completed yet", at most one per stream) whatever its age, but it is not in the median: it has no recovery time yet.
• The window: a recovery counts when its success was created in the last 30 days, counted back from the render time in UTC, both ends included, as for lead time. A deployment created after the render time is not there yet. A recovery belongs to the project whose config lists its repository, compared ignoring case.
• The median, as for lead time, with the count; for an even count the mean of the two middle recovery times. The duration is written as lead time's is.

The bands are DORA's current Quick Check answers for failure recovery, which are word for word lead time's six (the script the Quick Check loads, https://dora.dev/quickcheck/quickcheck.js, maps both questions to the same answers: "Less than one hour", "Less than one day", "One day to one week", "One week to one month", "One to six months", "More than six months"). So the median recovery time is banded on lead time's edges, a month being 30 days:

Median recovery time	DORA band
below 1 hour	Less than one hour
1 hour to below 24 hours	Less than one day
24 hours to below 7 days	One day to one week
7 days to below 30 days	One week to one month
30 days to below 180 days	One to six months
180 days and more	More than six months

A row whose deployments all failed shows "— · 1 recovery not completed yet": the worst case, failed and never recovered, is never shown as no data (decision #35).

Change fail rate

The fourth DORA number on the page (forsgren#18, package internal/metrics): DORA's share of deployments that cause a failure in production requiring remediation. The table's fourth column shows it as a DORA band with the rate and, in brackets, the failed changes of the final deployments of the last 30 days: "20% · 15% (2 of 13)". With no deployment in the window it says "No deployments", followed by " · 1 failure issue" when an issue was opened in it.

What counts. Rulings on forsgren#18, taken while Yves was away (each can be reverted there):

• The deployments are the final ones in data/deployments.csv, successes and failures, created in the last 30 days, counted back from the render time in UTC, both ends included, as for lead time and recovery time. A deployment in the state other (a cancelled run) is neither, and one created after the render time is not there yet.
• A failed change is a deployment whose state is failure, as recovery time counts them, or an issue labelled failure (forsgren#6) opened in the window, from data/failures.csv (see History, Collecting deployments). An issue counts once, open or closed, as its newest line says, however it was closed: the label is the ruling (forsgren#6), so an issue that turned out not to be a failure needs its label removed before it is stored, since a stored issue is never taken out.
• Never twice. What is stored cannot tell which deployment an issue is about, so an issue filed about a failed deployment would count twice. Per repository, the failed changes are therefore the larger of its failed deployments and its failure issues: issues are taken to be about the repository's failed deployments as long as there are as many of those. A repository whose deployments all succeeded (a crash users hit after a good upload) fails by its issues alone; a repository that files no issues, by its failed deployments alone. The cost: a failed deployment and an unrelated issue of the same repository count as one. The page shows both counts as found, so the reader sees what was taken.
• A project adds up its repositories, compared ignoring case; a repository no project lists is left out. It has at most as many failed changes as deployments, so the rate is at most 100%; its counts still show what was found.
• The rate is the failed changes out of the deployments, shown in whole percent, rounded down, so the percent shown never reaches a band edge the rate has not.

The bands. DORA's current Quick Check does not offer answers for change fail rate as it does for the other three: it asks for a percentage on a slider, and shows it on a scale labelled with six values. The script the Quick Check loads, https://dora.dev/quickcheck/quickcheck.js, asks "Approximately what percentage of changes to production or releases to users result in degraded service (for example, leads to service impairment or service outage) and subsequently requires remediation (for example, requires a hotfix, rollback, fix forward or patch), if at all?", shows the answer as "<n>% of changes fail", and labels its scale "100%", "80%", "60%", "40%", "20%" and "0%". A rate is banded by the nearest label; a rate halfway between two is the higher one, as an edge of lead time's bands is the slower band. Compared exactly, failed changes times 100 against the edge times the deployments:

Change fail rate	DORA band
below 10%	0%
10% to below 30%	20%
30% to below 50%	40%
50% to below 70%	60%
70% to below 90%	80%
90% and more	100%

A row whose deployments all failed shows its rate as found, "100% · 100% (1 of 1)" (decision #35).

Deployment rework rate

The fifth DORA number on the page (forsgren#39, package internal/metrics): DORA's share of deployments that were not planned but made to address a user-facing bug. The table's fifth column shows it as a DORA band with the rate and, in brackets, the rework deployments of the successful deployments of the last 30 days: "20% · 14% (1 of 7)". With no successful deployment in the window it says "No successful deployments".

What counts. Lenka's proposal on forsgren#39 (Yves can revert it there):

• The deployments are the successful ones in data/deployments.csv created in the last 30 days, counted back from the render time in UTC, both ends included, as for the other metrics. A deployment created after the render time is not there yet.
• A rework deployment is a successful deployment that either (a) is the first success of its stream after a failed deployment, the recovery that failed deployment recovery time already finds (the stream is collect's: repository ignoring case, kind, name and task, a repository's releases one stream), however old the failure; or (b) was created while an issue labelled failure of the same repository was open, from data/failures.csv: opened at or before the deployment, and closed after it or not yet.
• Counted once. A deployment that is both is one rework deployment.
• A project adds up its repositories, compared ignoring case; a repository no project lists is left out. A failure issue names no task, so a service's row has no issues and only (a) applies there, as for change fail rate.
• The rate is the rework deployments out of the successful ones, in whole percent, rounded down, so the percent shown never reaches a band edge the rate has not.

The bands. DORA's Quick Check does ask for it. The script it loads, https://dora.dev/quickcheck/quickcheck.js, asks "Approximately what percentage of deployments in the last 6 months were not planned but were performed to address a user-facing bug in the application?", shows the answer as "<n>% of deployments were unplanned" and scales it on the same six labels as change fail rate, "100%", "80%", "60%", "40%", "20%" and "0%". A rate is banded by the nearest label, a rate halfway between two the higher one, on change fail rate's edges (below 10% is 0%, 10% to below 30% is 20%, and so on up to 90% and more as 100%). DORA's question says "in the last 6 months"; forsgren measures the last 30 days, like its other four metrics.

The page

Every page's footer opens with one paragraph (forsgren#41, #45): Forsgren, linked to its GitHub repository, its version, "Metrics from GitHub data." "Calculated at 2026-10-03 12:00 UTC", the moment of the run (UTC, to the minute), on every run, with rows or without; and, when a newer forsgren release exists than the version that built the page, the version line adds it, "Forsgren 0.6.2 · 0.3.9 is available" (forsgren#40; nothing is added when the page is up to date, and no repository appears). The numbers are compared as numbers, so 0.0.10 is newer than 0.0.9. On a table page the footer's paragraph is followed by two links on one line, "Settings" and "What the bands mean", to the settings page and the legend (forsgren#83, #84). The legend page's footer links to Settings, the settings page's to the legend, no page to itself; a page with no table, such as the no-projects how-to, has none.

render writes one table (forsgren#38) first on the table page, with no text above it but a visually hidden heading for screen readers, "Forsgren 0.6.2: the five DORA metrics"; where each metric comes from is explained on the legend page, counting back from the time in the footer. A config that lists no projects has no table: the page shows, in its place, a short how-to, that forsgren.config.yml lists the projects, with a small example (a project, two repositories, one with a label) and a link to Configuration (forsgren#41):

• The columns are the five metrics: deployment frequency, lead time for changes, failed deployment recovery time, change fail rate and deployment rework rate. The first column heads each row.
• The rows are, per project in the config's order, its total, then a row per label its repositories give (see Configuration, label and services), sorted by label ignoring case and indented under it. A project with label rows is headed "Acme Shop (total)"; one without is one row with its name. A label row's header also carries its project's name for a screen reader ("Acme Shop: API"), hidden on screen, and the dash drawn before a label has empty alternative text, so it is not read.
• Each row is counted by the same five metric functions as a project of its own, over its own data: a project's total over all its repositories, the numbers the page showed per project before the table; a repository's label row over all that repository's deployments, commits and failure issues; a service's row over the deployments of its task (written exactly, the repository ignoring case) and the commits they shipped (joined by repository, kind and deployment ID). A failure issue names no task, so it counts on the total and on a repository's label row, never on a service's row, whose change fail rate is its failed deployments of its final deployments, and whose rework rate counts only the first success after a failed deployment.
• Each cell is short: the DORA band, then the number that decided it and the count it is over, "Less than one day · 2 h 7 min (48)". Durations are in min, h and d, each part cut down, never rounded up.
• Pages: index.html holds the table and, in its footer, two links, "Settings" to settings.html and "What the bands mean" to legend.html; both have a link back to the table, and each links in its footer to the other kind of page (the legend to Settings, the settings page to the legend; forsgren#84). The issues page, issues.html, has no footer links (forsgren#76, decisions #102 and #103).
• Views (forsgren#46): the table is built in more than one view, each its own page: /standard/ (standard/index.html) is the table above, band, number and count, and /numbers/ (numbers/index.html) shows only numbers, no band text: the successful deployments of the last 30 days (0 where there are none), the median lead time and the median recovery time as durations ("2 h 7 min", the same text the standard cell shows after its band), and the change fail rate and the rework rate in whole percent ("14%"); a - where there is no number (no commits, no completed recovery, no deployments or successful deployments). A row with no deployments recorded is five cells there, 0 and four -, never a sentence. Each view's page has a switch in its table's caption, on one line after the title, "DORA metrics View: standard · numbers · scoring · issues" (forsgren#51, #76: issues is not a view of the table but links to the issues page, issues.html, or ../issues.html one folder down); the title is its own element, which names the table and its scroll region, so the table's name stays "DORA metrics". The current view is plain text marked aria-current="page", the others links (../standard/, ../numbers/, ../scoring/); a page one folder down reaches styles.css and the legend through ../. The legend page serves all views. The root index.html follows the view: config key (see Configuration): that view, with the switch (its links relative to the root, standard/, numbers/ and scoring/, and its view marked aria-current="true", as the root is not that view's page); without the key it is the standard page with no switch. /scoring/ (scoring/index.html, forsgren#47) shows each metric's DORA Quick Check score alone, 0 to 10 (9.3, 10, 0), - where the metric has no data (deployment frequency: never a successful deployment in the recorded history, where the numbers view shows 0; a last success older than six months scores 0, the lowest band), and a sixth column, Overall Performance: the mean of the scored metrics to one decimal, - when none is scored. A 0 score is performance in the lowest band, never missing data. The switch names it, as it names the other two.
• The legend (legend.html) gives each metric's bands in one compact list (recovery time's are lead time's, and rework rate's are change fail rate's, so it refers to them), with what each cell counts and its window; its last section, Scores, says what the scoring view shows and credits the DORA Quick Check, linked: "Scores follow the DORA Quick Check (dora.dev), © Google LLC, CC BY 4.0" (forsgren#47). It no longer lists the settings (forsgren#84).
• The issues page (issues.html, forsgren#76) is a table, Date | New | Completed | Not planned | Duplicate | Other | Total, one row per UTC calendar day, the last 30 complete days (issueDays), yesterday on top and going down; today is left out, so a row never changes once it is shown (apart from the known limits below). All tracked repositories are counted together. A day with no events is a row of zeros. New counts the created events of the day; a reopened issue is not new. Every closed event of the day is counted in exactly one of the other four columns, by its reason (decision #107): Completed is the reason completed, Not planned not_planned and Duplicate duplicate; Other is a close with no reason (an old issue, closed before GitHub gave reasons) or a reason forsgren does not know. Total is the issues open at the end of that day, across all repositories: the issues created, minus those closed, plus those reopened, counted from the oldest stored event. A close of an issue with no created event is ignored, and the order of the lines in issues.csv does not matter. The Total is shown as calculated: a negative Total means the collected data is inconsistent (missing events, a partial read, or a bug), and it is shown rather than hidden. Reopen times are the times collect saw them (see Issue events), so a Total from before a reopen was seen is an estimate. The caption holds the same view switch as the table pages, with issues as the current entry (aria-current="page"), and says the days are UTC. render reads data/issues.csv next to its --data file like failures.csv: a missing file is no events (a table of zero rows, a new installation), an unknown version or a malformed line fails the render with its own message.
• The settings page (settings.html, forsgren#84) lists each optional config key with the value in use, see Configuration; it has a link back to the table.
• Layout: the table has a caption and <th scope> headers; it scrolls sideways inside its own box on a narrow screen, so the page keeps its 1rem (16px) gutter and never scrolls sideways itself. styles.css sets no colour but color-scheme: light dark, so light and dark mode follow the browser's own colours, the lines drawn in the text colour.

The page shows project names, labels and numbers only: never a repository's or a task's own name, a SHA or a commit message.

Configuration

An installation describes what forsgren measures in one file, forsgren.config.yml, in its data repository. Together with data/ it is all an installation's owner owns, so the template contains neither: it holds only forsgren's own files. Installing a new version is one click: the template's .github/dependabot.yml makes Dependabot open a pull request that moves the pinned uses: line to each new release, and merging it is the update (#14). A release that changes more than that line (a permission, a secret) says so in its notes; then the owner copies the new template's files over the data repository once, which replaces every forsgren file and never touches forsgren.config.yml or data/, and the repository keeps its secrets and Pages address (ruled 2026-10-02, #9). forsgren creates data/ when it first stores history and never overwrites history that is there. One installation measures every project it lists on one page, each project in its own rows of one table (#6, #38).

version: 1
projects:
  - name: Acme Shop
    repositories:
      - name: acme/api                          # owner/name on GitHub
      - name: acme/ios-app
        deployment: workflow=testflight.yml
  - name: Acme Tools
    repositories:
      - name: acme/cli
        deployment: release

• version: 1 is required: it is the format's version. A file without it, or with any other version, is refused, so a forsgren never misreads a file written for another format.

• view is optional (forsgren#46): the view the site's root page shows, standard, numbers or scoring (forsgren#47), written at the top level, for example view: numbers. Left out, or without a value, the root is the standard page with no view switch, as before, so an existing installation sees no change until it opts in; with a view:, even standard, the root page is that view and carries the switch. Any other value is refused by check-config and render, naming the key and the valid values: invalid view "Numbers": use standard, numbers or scoring. Each view is also its own page at /standard/, /numbers/ and /scoring/, whatever this key says. The starter that init-config writes for a new installation includes view: standard (forsgren#51), so a new installation has the switch from its first run with projects (a page without data shows no switch); an existing config without view: keeps the plain root, as init-config never rewrites an existing file. The starter also writes auto_update: true and auto_update_level: patch (forsgren#58), so a new installation merges forsgren's patch releases by itself; an existing config without auto_update: keeps it off (see Auto-update).

• history_days is optional (forsgren#57): how deep a repository's history goes, in days, a whole number from 1 to 1825 (5 years), written at the top level, for example history_days: 730. Left out, or without a value, it is 365. Anything else (zero, a negative number, more than 1825, a quoted value, a decimal or text) is refused by check-config and render, naming the key and the limit: invalid history_days "1826": use a whole number of days from 1 to 1825. forsgren does not read that far at once: a repository's first run reads one chunk (history_chunk_days), and each later run reads what is new plus one older chunk, until the history reaches history_days back (see Collecting deployments). It is also the most any run reads back, however old the newest stored deployment is, and how far back the first read of a repository's failure issues goes. Raising it later fills in the extra range, chunk by chunk, from where each repository's history ends now; lowering it stops the older chunks sooner and removes nothing. To read a range again that was already read, remove that repository's rows from data/deployments.csv, data/commits.csv and data/reach.csv, or remove data/, and the next run is its first run again. What GitHub no longer returns (a deleted deployment, a run past its retention) cannot come back. The starter that init-config writes includes history_days: 365.

• history_chunk_days is optional (forsgren#57): how many days back each run adds until history_days is reached, a whole number from 1 to 365, written at the top level, for example history_chunk_days: 30. Left out, or without a value, it is 100; it is not tied to history_days. Anything else (zero, a negative number, more than 365, a quoted value, a decimal or text) is refused by check-config and render, naming the key and the limit: invalid history_chunk_days "366": use a whole number of days from 1 to 365. A repository's first run reads this many days back, and each later run adds one older chunk of this size until history_days is reached; a chunk larger than history_days is allowed and covers all of it in one read. The starter that init-config writes includes history_chunk_days: 100.

• working_hours is optional (forsgren#71): how many hours a working day is, a whole number from 1 to 24, written at the top level, for example working_hours: 8. Left out, or without a value, it is 8. Anything else (zero, a negative number, more than 24, a quoted value, a decimal such as 8.5 or 8.0, or text) is refused by check-config and render, naming the key and the limit: invalid working_hours "25": use a whole number of hours from 1 to 24. It is read and checked now; the on-demand threshold uses it in the next step. The starter that init-config writes includes working_hours: 8.

• The settings page (settings.html, forsgren#74, moved out of the legend in forsgren#84) lists every optional key with its value, view, auto_update, auto_update_level, history_days, history_chunk_days and working_hours, and marks each key the file does not set with "(default, not set in forsgren.config.yml)".

• projects is required: a list of projects, or projects: [] for an installation that measures nothing yet (it is valid, and check-config reports projects: 0, repositories: 0). A file whose projects key is missing, or has no value (projects:, projects: null), is refused with no projects, so a forgotten list is never taken for an empty one. A project is a name and the repositories that ship it (a product can be several repositories). Project names are unique, ignoring case.

• repositories: at least one per project, each owner/name, and each listed once in the whole file (ignoring case, as GitHub does).

• deployment says what counts as a deployment of that repository (#6):

  • left out, or environment=production: a GitHub Deployment to the environment production whose status is success. This is the default and the recommended way: it works in any repository, and carries the commit lead time is measured from. environment=<name> names another environment.
  • workflow=<file>.yml (or .yaml): a successful run on main of that workflow, by its file name in .github/workflows/ (no directory).
  • release: a published GitHub Release, for App Store apps and tools.

• label and services are optional, per repository (forsgren#38): they name the rows the page shows under the project's total. The page never shows a repository's or a task's own name, only a label written here, so a public page names nothing its owner did not choose.

  • label: Website: one row for all of the repository's deployments, its commits and its failure issues.
  • services:, a map of deployment task to label: a row per listed task, with that task's deployments and the commits they shipped. A task left out counts in the project's total only.
  • neither: no row of its own; the repository counts in the total only, as every repository did before.

  version: 1
  projects:
    - name: Acme Shop
      repositories:
        - name: acme/app
          services:
            deploy-api: API
            deploy-admin: ADMIN
            deploy-ios: IOS
        - name: acme/web
          label: Website
  

  The rows under a project are sorted by label, ignoring case (ADMIN, API, IOS, Website); a project without labels shows its total row alone. Refused: an empty label, a label used twice in one project (ignoring case), a label or task that is not text (label: 5, deploy-api: true), services: {} or a task that is empty, label and services on one repository (a row for the repository and rows for its services would count the same deployments twice beside each other), and services on a release repository (its task is the tag, new with every release). A label: or services: without a value is the key left out.

A failure is an issue labelled failure whose body carries the failure record block (see How it gets its data); lead time runs from a change's first commit. Neither is configured per repository in version 1.

Any other key is refused, as is a value of the wrong kind or a second YAML document in the file, so a typo never silently does nothing. Every refusal names the file, the project and repository it is in (or the line, for a YAML error) and what to write instead, on one line: a line break in a key or value it quotes is written as \n.

Check a config without rendering anything:

forsgren check-config --config forsgren.config.yml

It prints one line, OK: forsgren.config.yml is a valid forsgren config (version 1): projects: 2, repositories: 3, with , labels: 4 added when the file labels rows, and exits 0; it exits 1 with the refusal on stderr when the file is invalid or cannot be read, and 2 on a usage error.

Start an installation's config with init-config:

forsgren init-config --config forsgren.config.yml

When the file is missing it writes a starter and prints created forsgren.config.yml. The starter is a comment that explains the file, names forsgren check-config, the three deployment forms and the two label forms, and shows a commented example with made-up acme names (the default deployment, workflow= and release), followed by version: 1, view: standard, auto_update: true, auto_update_level: patch, history_days: 365, history_chunk_days: 100 and projects: [], so check-config accepts it as it is: projects: 0, repositories: 0. When the file exists, whatever it holds (even an invalid or an empty file), it is left byte for byte and the command prints kept forsgren.config.yml; both exit 0. The file is written whole or not at all, and a file that appears while the command runs is never replaced. The directory must exist: init-config does not create one, so a mistyped directory is an error. It exits 1 with init-config: <path>: <reason> on a real error (the directory is missing or not writable, or the path is a directory), and 2 on a usage error. The metrics workflow runs it on every new install (see Running forsgren).

Collecting deployments (collect)

FORSGREN_TOKEN=<token> forsgren collect --config forsgren.config.yml --data data/deployments.csv

collect reads, for every repository in the config, that repository's deployments from GitHub's REST API by its deployment rule, and appends the final ones to the history (see History), the commits of each new successful one to data/commits.csv next to it, the repository's failure issues to data/failures.csv next to it, and the events of all its issues to data/issues.csv next to it (see Issue events below). It prints one line per repository, acme/app: 3 new, 1 skipped (not final), 12 commits: new is what was appended, skipped (not final) is what is still running and is stored by a later run, commits is the commits stored for the new deployments. A deployment already in the history is skipped without a count. When it stored failure issues the line goes on with , 2 failure issues, the issues new or changed since the last run.

• environment=<name> (the default, production): the GitHub Deployments to that environment, and each one's statuses. A deployment is a success when any of its statuses was success: GitHub marks a successful deployment inactive once a newer one replaces it, so its latest status says nothing. It is a failure when no status was success and its newest status other than inactive (by time, then ID) is failure or error. Anything else (no status yet, pending, queued, in_progress, only inactive, or a retry: pending, queued or in_progress after a failure) is not final, so a retry that succeeds is stored as a success. The deployment's ID, sha, task and created_at are stored.
• workflow=<file>.yml: the runs of that workflow on the repository's default branch, from the repository itself (a fork's run on a branch of the same name does not count). The conclusion success is stored as success, failure as failure, and every other conclusion (cancelled, skipped, timed_out, action_required, neutral, stale, startup_failure) as other: it is final, it is not a deployment that reached users, and the history keeps that it happened (lines are never rewritten, so what is not stored when it is seen cannot be added later). A run that is not completed is not final. The run ID, head_sha and run_started_at (the start of the attempt whose conclusion is stored) are stored. A re-run keeps its run ID, so a run stored after a failed attempt keeps that failure when a later attempt succeeds.
• release: the published releases, as success at their published_at. Drafts are not published; prereleases are not shipped to everyone (a release candidate or a beta), so neither is a deployment. The commit is the tag's commit (an annotated tag resolved to its commit), one small request per release not stored yet; the tag is stored as the task.

How far back. A repository's history is read in chunks of history_chunk_days (100 unless the config says otherwise), down to history_days (365), see Configuration (forsgren#57).

• A repository with nothing in the history for its rule and no row in data/reach.csv is on its first run: it reads one chunk back from now, and its reach (the date down to which its history was read) is set to the start of that chunk.
• Every later run reads what is new, from 7 days before the newest deployment stored for it (so a deployment that was not final at the last run is still found, and never more than history_days back), plus one older chunk: from its reach back by one chunk, but not past history_days. Its reach then moves to the start of that chunk. Once the reach is at or past history_days back, no older chunk is read and the reach stays.
• data/reach.csv holds the reach, one row per repository, sorted by name (# forsgren reach v1, then repository,reach, the date as RFC 3339 UTC). It is written next to deployments.csv whole, through a temporary file that is renamed over it, and only when a reach moved. It is needed because the oldest stored deployment cannot tell a quiet stretch from one that was not read yet. An installation that has none starts each repository with stored deployments at its oldest stored deployment: everything since was read by the runs so far.
• A deployment still not final 7 days before the newest stored one is not read again, so it is never stored.
• Every list is read newest first, 100 per page, and stops at the first page that reaches the start of its range; at most 10 pages per list (the newest 1000). GitHub's list of deployments and releases has no date filter, so an older chunk pages again past everything newer; a workflow's runs are asked for the range of the chunk and skip it. When a read is cut at the page limit, stderr says so: collect: acme/app: read the newest 10 page(s) only; older deployments were not read, and the reach moves to the oldest date the read actually reached, so the next run continues from there. A chunk that lies behind more than 1000 newer deployments can never be reached: the run warns, and the reach stays.
• The failure issues are not chunked: a repository's first read goes from history_days back, and each later run reads from where the last one ended (see The failure issues below).
• Re-reading is safe: the history skips what it already holds, and a stored deployment's statuses or tag are not asked again.

The commits of each deployment (for lead time, forsgren#16). Each successful deployment collect stores is compared with the previous successful one of its stream, compare/{previous commit}...{its commit}, and the commits after the previous one's commit up to its own are stored in data/commits.csv, each with its author date and the deployment's created_at.

• A stream is a repository's deployments by one rule with the same environment or workflow and the same task: a repository deploying deploy-api and deploy-admin to production measures each against its own previous deployment. A release's task is its tag, a new one with each release, so a repository's releases are one stream. Repository names are compared ignoring case.
• The previous is the newest success of the stream before the deployment (by created_at, then ID), stored by an earlier run or found in the same run: a run takes its new deployments oldest first.
• The first success of a stream has no known start and gets no commits. A failure, or another final state, is never a previous and gets no commits: its commits are in the next success's comparison.
• Once. Only the deployments a run stores are compared, so the daily run never asks about a stored one again, and a deployment skipped below is not tried again either: what makes it skip does not change by asking again.
• Skipped, with a warning on stderr, the run going on: a comparison GitHub cut (more commits than forsgren reads, or fewer than GitHub's total_commits): collect: acme/app: deployment 1002: 1000 commits compared, list cut; lead time skips this deployment, since a cut list keeps the oldest commits and would skew lead time; a previous commit that is not an ancestor of the new one (a force-push, or a rollback to an older commit) and a commit GitHub does not have, both naming the two SHAs (...; lead time skips deployment 1002). These are the history's shape, not the token's access. Any other error of a comparison (no access, a rate limit) fails the repository like any other call.
• Skipped, not compared, with a warning: a success that finished between two successes of its stream stored by earlier runs, say one still running at the last run while a newer one succeeded: collect: acme/app: deployment 1002 finished after the newer deployment 1003 was stored; lead time skips it, so no commit counts twice. The newer one was compared with the success before both, so its commits already hold this one's.
• Backfilled deployments: a success older than the oldest stored one of its stream (an older chunk) is compared with the success before it. The oldest stored success has no previous yet and waits; the run that reads an older success of the stream compares it. No commit is stored twice.
• Not verified against live GitHub. What collect assumes of a comparison comes from GitHub's REST reference and is pinned against made-up answers only: that total_commits counts every commit of the comparison (fewer read is taken as a cut list); that a SHA GitHub does not have answers 404 or 422 (both read as a missing commit, so that deployment is skipped, not the repository failed); and that the pages list the commits oldest first, so a cut list keeps the oldest. The first live runs are where to check them.

The failure issues (for change fail rate, forsgren#18). Every repository's issues labelled failure, open or closed, that GitHub says were updated since a time: issues?labels=failure&state=all&since=, every page up to the page limit, pull requests left out (GitHub lists them as issues, with a pull_request field).

• Where a run starts reading. data/failures_read.csv, next to the history, records per repository when its failure issues were last read: a version line # forsgren failures read v1, the column line repository,read_at, then one line per repository. A run asks for the issues updated since that time minus 1 day. A repository with no time yet is read for the first time, from history_days back. The time moves to the run's start only after the repository's issues were read and stored; a failed read leaves it, so the next run asks again from the old time. A failures_read.csv that is not in the format refuses the run, like reach.csv.

• Each issue's number, created_at, closed_at and the failure-start: line of its body are stored (see History). An issue already stored is stored again only when one of them changed: closed, or reopened.

• The record block is read from the issue's body, the lines failure-start:, failed-build: and fixed-build: alone on their line, as forsgren#6 rules. failure-start is read as ISO 8601 with an offset, to the minute (2026-09-20T09:12+02:00) or the second; a body without one, or with a time in another form, stores the issue with an empty failure_start and a warning: collect: acme/app: failure issue #43 has no failure-start line forsgren can read in its body, once, when the issue is first stored (not again when it is closed or reopened). A block written in a comment instead of the body is not read. The issue counts all the same: change fail rate needs only when it was opened.

• A list cut at the page limit is stored and named on stderr: collect: acme/app: read the newest 10 page(s) of failure issues only; older ones were not read.

• Not verified against live GitHub. That since filters by the update time, and that a pull request is any item with a pull_request field, come from GitHub's REST reference and are pinned against made-up answers only.

Errors. Each repository is tried, also after another failed; a failing one is named on stderr (collect: acme/app: ...) and nothing of it is stored, neither its deployments, nor their commits, nor its failure issues, because a repository's records are appended in one go, after all of them are read and compared: its commits first, then its failure issues, then its deployments. A deployment is never stored without its commits: when one of the two writes fails, the next run reads and compares those deployments again, and the commits already stored are skipped. The others are stored, and collect then exits 1 with collect: 1 of 3 repositories failed. A 401, 403 or 404 says check FORSGREN_TOKEN's access to acme/app, except for a release's tag: a 404 or 422 there says tag v1.2.0 not found and asks whether it was deleted after the release was published, since the release itself was just read with the same token; and except for a comparison, where a 404 or 422 is a commit GitHub does not have (see above); a rate limit says when it resets (UTC) or how many seconds GitHub asks to wait; an answer that is not what GitHub documents is refused by the repository's name. A history, a commits file or a failures file that cannot be read (another version, a malformed line) is refused before GitHub is asked anything. With no project configured collect does nothing, needs no token and exits 0; with at least one repository and no FORSGREN_TOKEN it exits 1 before anything is read or written. It exits 2 on a usage error.

The token. collect reads the token from the environment variable FORSGREN_TOKEN only (never a flag) and sends it only as an Authorization: Bearer header to api.github.com: never in a URL, never in a message, and never to another host (a next-page link elsewhere is refused). A fine-grained personal access token, read-only, for the measured repositories, needs per rule:

Rule	Repository permissions (read)	Calls
environment=<name>	Deployments, Contents, Metadata	list deployments, list deployment statuses, compare two commits
workflow=<file>.yml	Actions, Contents, Metadata	get the repository (its default branch), list a workflow's runs, compare two commits
release	Contents, Metadata	list releases, get the tag's commit, compare two commits

Every rule also lists the repository's issues labelled failure, for change fail rate, which needs Issues (read) as well. A token without it fails every repository, deployments included, with check FORSGREN_TOKEN's access: add Issues (read) to the token before updating to a forsgren that reads failure issues.

Comparing two commits, for the commits of each deployment, needs Contents with every rule. A token without it fails the repository from its second successful deployment on, with check FORSGREN_TOKEN's access, when GitHub answers 401 or 403; a 404 would read as a commit GitHub does not have and skip each deployment with a warning instead (not verified against live GitHub, see above). Metadata is in every fine-grained token. A classic token needs repo for private repositories (no scope for public ones).

Issue events (forsgren#76)

Besides the failure issues, each run reads the issues of the repository, whatever their labels (Client.Issues: issues?state=all&since=, 100 per page, pull requests left out, up to the page limit), and appends their events to data/issues.csv (see History). It asks since the same time as the failure issues, the repository's entry in failures_read.csv minus one day, and the read time moves only after the deployments, failure issues and issue events of the repository were all stored (decision #101). A issues.csv that is not in the format refuses the run before GitHub is asked anything, like the other data files; if it cannot be written, the repository fails and its deployments are not stored, so the next run reads them again. The events are worked out from what GitHub says now, and from the newest event stored for the issue, by time (at the same second, created comes before closed, and closed before reopened; decision #100):

• created, at the issue's created_at, for every issue read;
• closed, at its closed_at, with its state_reason, when it is closed. A close after a reopen has a new closed_at, so it is a second closed event;
• reopened, when the issue is open and the last event stored for it is a close. GitHub gives no reopen time, so it is dated when collect sees it: the run's time, to the second. Once stored, it is not written again, because the last event is then the reopen, not a close.

An event already stored is skipped (see History), so reading the same issues again writes nothing.

The full read (decision #109) gives the issues page its history back to the first issue, including the open issues nothing has touched for a long time, which the Total counts. The first run for a repository with no line in data/issues_full.csv (repository,full_at, the time the full read was done) reads every issue of it, open or closed, without a time cut: issues?state=all, 100 per page, up to 100 pages (10,000 issues), pull requests left out. Its events are appended like any others, so an installation that already has events from the daily reads gets only the missing ones. The repository is noted in issues_full.csv only after its events were stored, and later runs skip the full read. If the full read stopped at the 10,000 issues cap, stderr says so (the full read stopped at 100 page(s) of issues; the daily collection continues, but older issues and so the historical total stay incomplete), what was read is kept, the repository is not noted, and the next run tries again. Daily collection is not capped this way: it continues past the cap, but for a repository with more than 10,000 issues the back history, and so the historical Total, stays incomplete. An issues_full.csv that is not in the format refuses the run before GitHub is asked anything.

Known limits of the issue events (forsgren#76):

• Deleted or transferred issues drift: GitHub no longer lists them, so their events stay in the file but nothing marks them as gone.
• A close and a reopen that both happen between two collect runs are never seen: the issue looks as if nothing happened (or, when it was closed before, closed again at a new time).
• A reopen is dated when collect sees it, up to a day late (the runs are daily), not when it happened on GitHub; its day on the issues page can be the next one, and a Total from before a reopen was seen is an estimate.
• The full read stops at 10,000 issues: for a repository above that, the daily collection continues, but the back history and the historical Total are incomplete (the warning above).

Running forsgren

forsgren renders a static page whose footer says "Forsgren 0.6.2", the version of the forsgren that rendered it, and shows each project's deployment frequency, lead time for changes, failed deployment recovery time and change fail rate (and the deployment rework rate); every run writes the page in each view too, at /standard/, /numbers/ and /scoring/ (see The page). That version has one source, the version variable in cmd/forsgren/main.go; a release build can set it with -ldflags "-X main.version=<version>". forsgren collect reads GitHub into the history file (see Collecting deployments); the daily run calls it, commits the history to the data repository and renders the page with each project's deployment frequency, lead time for changes, failed deployment recovery time and change fail rate from it (see Deployment frequency, Lead time for changes, Failed deployment recovery time and Change fail rate).

The first release is v0.0.1. Install a release with go install github.com/yveshanoulle/forsgren/cmd/forsgren@v0.0.1; an installation pins that version. From a checkout of this repository:

./Scripts/build_site.sh            # builds .build/bin/forsgren, renders .build/site
.build/bin/forsgren render --out <dir>

forsgren render --out <dir> [--config <path>] [--data <path>] [--latest <version>] [--waiting-pr <number>] [--needs-check <status>] writes the site (every page plus styles.css) into <dir>, creating it when needed, and exits 0; 1 when the render failed (or the --config file is missing or invalid, with check-config's refusal), 2 on a usage error. --latest is the newest forsgren release, as forsgren latest-release prints it: render itself never calls GitHub, so it stays testable offline, and a value that is missing, equal, older or not a version adds nothing to the footer. forsgren latest-release reads forsgren's own public repository's latest release (with GITHUB_TOKEN when the environment has one, without otherwise) and prints its version without the v; when the lookup fails it prints nothing, says why on stderr and exits 0, since a page without news of a release is not an error. --waiting-pr <number> (1 or more, anything below is a usage error; leaving it out means none) is Dependabot's open pull request for it, as forsgren waiting-pull-request --version <x.y.z> [--status <path>] prints it (the open pull requests of GITHUB_REPOSITORY, read with GITHUB_TOKEN; with --status it also writes how the lookup went, ok, no-access for the 403 of a token without pull-requests: read, rate-limited when GitHub's rate limit refused it (a 403 or 429 with no request left, never taken for a missing permission), or failed, and its exit status is 0 either way); the footer then names the pull request instead of "is available". --needs-check <ok|no-access|rate-limited|failed> is how forsgren check-needs went (see The setup issue): anything but ok adds "needs more configuration: see the job summary of this run" to the footer, and leaving it out or ok adds nothing. forsgren run-summary --latest <version> --waiting-pr <number> --pr-check <ok|no-access|rate-limited|failed|skipped> [--needs-check <ok|no-access|rate-limited|failed>] --repository <owner/name> prints the run's job summary as markdown (the version that built the page, the latest release or "unknown", and one of "up to date", "0.0.10 is available; no Dependabot pull request yet", "0.0.10 is waiting in pull request #7", "pull-request check skipped: grant pull-requests: read in your caller to enable it", "the pull-request check hit GitHub's rate limit, the next run tries again" and "the pull-request check failed", and a Setup line, see The setup issue); the link is fine there, because a run page is private to the repository, unlike the public page. A flag it cannot use is a usage error that prints nothing. With --config, a config that lists no projects makes the page show, in place of the table and besides "Forsgren 0.6.2" in its footer, a how-to for filling forsgren.config.yml; without --config (the build above has no installation config) or with projects, the page is the placeholder. With --data as well (it needs --config), the page shows each project's deployment frequency from that history, counted back from the moment of the render, which the page names in its footer, "Calculated at 2026-10-03 12:00 UTC" (UTC, to the minute; forsgren#28: the render time, not the time collect finished; forsgren#41: shown on every run, so two renders differ by their time, and SOURCE_DATE_EPOCH, Unix seconds as in reproducible builds, 0 or more (a negative or non-numeric value fails the render), pins it, which Scripts/build_site.sh's fixture uses to compare a build with the golden files); a missing history file (a new install before its first collect) is an empty history, and a history with another format version or a malformed line fails the render with the history's message (exit 1).

Daily, from an installation's data repository. An installation does not build forsgren: its data repository calls forsgren's reusable workflow, .github/workflows/metrics.yml, once a day. That workflow installs forsgren from the very commit it is called at with go install, checks the data repository's forsgren.config.yml with forsgren check-config (writing a starter first when the file is missing), collects the configured repositories' deployments into data/deployments.csv with forsgren collect and commits that history, renders the page and publishes it to the data repository's GitHub Pages, on a GitHub-hosted runner, with no server and no local Go. The calling workflow, in the data repository:

name: Metrics
on:
  schedule:
    - cron: "17 5 * * *"   # once a day, 05:17 UTC
  workflow_dispatch:
jobs:
  metrics:
    permissions:
      contents: write
      pages: write
      id-token: write
      pull-requests: read   # optional, see below
      issues: write         # lets forsgren open its setup issue, see below
    uses: yveshanoulle/forsgren/.github/workflows/metrics.yml@<commit> # vX.Y.Z
    secrets:
      FORSGREN_TOKEN: ${{ secrets.FORSGREN_TOKEN }}

• The uses: line is the only version. Pin it by the full commit of a release, its tag in the comment. The workflow takes no input naming a version: it installs forsgren from its own commit and repository, which GitHub gives a called workflow as job.workflow_sha and job.workflow_repository (the github context would name the caller's). It refuses anything but a 40-digit commit and one owner/name before it installs anything. Dependabot, configured by the template, proposes the new uses: line of each release as a pull request (see Configuration, #14). A fork calling its own copy installs the fork, never upstream.
• v0.0.1 predates this. Its metrics.yml still requires with: forsgren-version: v0.0.1 under the uses: line; the one-line form starts with the next release, which has no such input: drop the with: block when moving to it.
• A new install gets a starter configuration. After the checkout the workflow runs forsgren init-config --config forsgren.config.yml. When the file is missing it is written (version: 1, view: standard, auto_update: true, auto_update_level: patch, projects: [], a commented example) and that one file, nothing else, is committed to the branch the run is on (GITHUB_REF; a scheduled run is always on the default branch) as github-actions[bot] with the message "forsgren: add a starter forsgren.config.yml"; the run goes on, the check passes on the starter, and the page shows the how-to for filling it. An existing file is never rewritten and nothing is committed, and a run that finds the file never looks at branches. Branch protection: the commit is a direct push, so the branch it lands on must accept a push from github-actions[bot]; if the default branch is protected against that (required pull requests or reviews, or required status checks with no bypass for the bot), the starter push is refused and the run fails once, on the first run of a new install. Then commit a forsgren.config.yml yourself (forsgren init-config --config forsgren.config.yml writes the starter) or allow the bot to bypass the rule. A run started by hand on another branch with no config puts the starter on that branch; a run on a tag fails by name, there is no branch to commit to. The push sends the job's token as an HTTP header through git's environment for that one command: not in any argument, not in a file, not in the log, and the checkout still keeps no credential.
• The daily run checks the configuration first. The workflow checks out the data repository (the commit that triggered the run, without leaving its token in the checkout) and runs forsgren check-config --config forsgren.config.yml on the file at the repository root, before it renders anything. An invalid file (a missing one was just written) fails the job with check-config's message in the log and in the run's summary, after a cross mark, and nothing is published from it. The message can quote the file, so the log shows it with workflow commands stopped: a line of it that starts with :: is printed, never run.
• The token: a FORSGREN_TOKEN secret. forsgren collect reads the measured repositories with a read-only token of the installation's own (the job's token reaches only the data repository). Make one with the permissions its rules need (see Collecting deployments, The token: per rule environment= Deployments, workflow= Actions, and for every rule Contents and Metadata), store it as the data repository's Actions secret FORSGREN_TOKEN, and pass it by name as above. By name, not secrets: inherit: the called workflow then receives this one secret and none of the repository's others. The workflow declares it required: false: a new install's first run, with the starter's zero projects, needs no token and runs before one is made; once forsgren.config.yml lists a repository, a missing token fails the run with collect's message naming FORSGREN_TOKEN. Inside the workflow only the collect step gets it, in its environment.
• The daily run collects and commits the history. After the check, forsgren collect --config forsgren.config.yml --data data/deployments.csv appends the new final deployments, and their commits to data/commits.csv (see Collecting deployments). When data/ changed, it and nothing else is committed to the branch the run is on as github-actions[bot], "forsgren: record deployments", and pushed the way the starter is; a run with nothing new commits nothing, and a run on a tag that has something new fails by name. A failing repository does not stop the run: what the others stored is committed and the page is published, and then the job's last step fails it, so the run shows red with collect's message in the step "Collect deployments". That message, and the rest of collect's output, is shown with workflow commands stopped, as check-config's is. One run at a time: the job's concurrency group is the data repository's, so the daily run and one started by hand queue rather than race on the push. If the branch still moved under a run (someone pushed meanwhile), its push is refused and the run fails with "… moved since this run checked it out"; nothing is rebased or forced, and the next run collects the same deployments again. The branch protection note on the starter holds for this commit too.
• The three permissions are the caller's to grant. A called workflow can only keep or narrow what its caller's job grants: pages: write and id-token: write let actions/deploy-pages publish, contents: write lets the starter step and the data step each push their one commit. Without them the deploy step or a push fails. Moving to the release that adds the starter and collect, change contents: read to contents: write and add the secrets: block in the calling workflow (and in the template's copy of it).
• pull-requests: read is optional, and the caller's to grant too (forsgren#40). With it, when a newer forsgren release exists and Dependabot has an open pull request in your repository that bumps the uses: pin to exactly that release, the page footer says "Forsgren 0.6.2 · 0.3.9 is waiting in pull request #7 (merge it to update)", with the number only. Without it the footer still says "0.3.9 is available": the lookup treats the refusal (a 403) as unknown, never as an error, and the run goes on. The workflow itself declares no permissions block, so it takes what your caller grants; it does not ask for this one, because a called workflow that asks for more than its caller grants stops the run before any step, which would break every install that has not added the line. Add it to the calling workflow (and to the template's copy) with the new release. Every run's job summary (its run page, private to the repository) says where the update stands, and when the token lacks the permission it says "pull-request check skipped: grant pull-requests: read in your caller to enable it". The pull request is found by its head branch, a temporary heuristic (#42): its author is dependabot[bot] and its branch starts with dependabot/github_actions/yveshanoulle/forsgren/ and ends with /metrics.yml- plus the version, which is Dependabot's naming for a dependabot.yml with directory: /, no groups: and the default branch separator, as the template has it. A grouped update, another separator or another directory names the branch differently, and the footer then keeps saying "is available".
• issues: write lets forsgren open its setup issue (forsgren#73). When the running version needs more configuration, forsgren check-needs writes one issue in the data repository with the job's token. Without the permission the run does not fail: the job summary and the page footer say what is needed instead (see The setup issue). The workflow declares no permissions block, so it takes what your caller grants.
• GitHub Pages must build from GitHub Actions (the data repository's Settings → Pages → Source). The run deploys to the repository's github-pages environment.
• The Go the workflow builds with is the one of forsgren's go.mod toolchain line for that release; the caller sets up nothing.

The setup issue (check-needs)

Each forsgren release declares what an installation needs: a permission, a secret, a file or a config key. The declarations are internal/needs/needs.yml, built into the binary, each from the release that introduced it on, so an entry applies to that release and every later one. Every metrics run checks the needs of the running version, so this is configuration compliance, not only a step of moving to a release: a need that is fixed stays fixed, and one that is removed again later is found again. Its command line, which metrics.yml runs in the step "Check what this forsgren version needs":

forsgren check-needs --config <path> --repository <owner/name> [--status <path>]

--config is the installation's forsgren.config.yml (the config keys a need asks for are its top-level keys), --repository is the installation's own repository, where the issue lives, and --status writes how the issue's write went (ok, no-access, rate-limited or failed). The job's token is GITHUB_TOKEN. It prints the steps of each missing need and exits 0 once its flags are valid, whatever the check or the write did; 2 is a usage error. The workflow passes the status on as render --needs-check and run-summary --needs-check.

• One setup issue per installation, not per version. It carries the label forsgren-setup, but its identity is a hidden marker, an HTML comment on the first line of its body; the label only narrows the lookup. An issue with the label and no marker is never touched, and if you remove the label from the managed issue, the next run opens a new one. Its title is "forsgren 0.6.2 needs more configuration" (the running version) and its body lists the steps of each missing need; title and body are presentation, and a run rewrites them.
• What a run does with it. Something missing and no issue: it opens one. Missing and the issue open: it updates it. Missing and the issue closed: it reopens and updates it, since the same issue is the installation's. Nothing missing and the issue open: it closes it with the comment "All items are in place as of forsgren .". Nothing missing and no issue, or a closed one: nothing.
• Without issues: write the write is refused, and the run does not fail: the job summary of the run says "the setup issue could not be written" and lists what this version needs, and the page footer says "needs more configuration: see the job summary of this run". A rate limit or any other failure does the same, with its own words. The summary and the footer speak only when something is really missing.
• Nothing missing is ok, even if closing the old issue failed: the failed close goes to the job log only.

Known limits. A check that cannot see something reports it as missing, so a false alarm is possible but never a silent pass.

• Permissions are read from the installation's .github/workflows/forsgren.yml (a renamed caller file reads as missing). forsgren requires permissions to be declared explicitly on the forsgren job in that file. write-all and read-all are intentionally unsupported, because forsgren follows least-privilege security practice. Workflow-level (top-of-file) permissions: are not supported by the check, even though the job inherits them, and with no permissions: at all the repository's default token permissions cannot be seen, so an explicit declaration is required. A successful issue write does not count as proof: it shows the capability, not the supported configuration.
• A secret is only seen when the workflow passes it in, so only secrets that metrics.yml passes to forsgren can be declared.
• A file is checked in the run's checkout, so check-needs runs at the checkout root; the metrics.yml step pins it.

Auto-update (check-update)

An installation can let forsgren's own updates merge themselves (#58). It is off until the config switches it on, and a new install's starter does (see Configuration). The chain, for each forsgren release:

1. Dependabot opens one grouped pull request that moves the pins of both caller files, .github/workflows/forsgren.yml (which calls metrics.yml) and .github/workflows/forsgren-update.yml (which calls auto_update.yml), to the new release.
2. On that pull request the caller forsgren-update.yml runs forsgren's reusable auto_update.yml, from the new pin the pull request carries. The workflow installs forsgren from its own commit, as metrics.yml does, and checks out the caller's repository at the pull request's base commit, so a pull request never switches auto-update on for itself.
3. forsgren check-update decides (below).
4. When it says merge, the workflow squash-merges the pull request, deletes its branch and starts forsgren.yml on the default branch, so the new release publishes the page now and not at the next daily run.
5. When it says install (exit 3, below), the workflow installs the newest release within the level itself and starts forsgren.yml; the pull request stays open (#62).

The two keys of forsgren.config.yml (see Configuration):

• auto_update is true or false, and only those literals (a quoted value, yes or a number is refused by check-config). Absent, or without a value, it is off, so an existing config keeps its behaviour until it opts in.
• auto_update_level is patch, minor or major: the largest step an update may take and still merge itself. It has no default: with auto_update: true and no level, the config is refused (check-config names the three values), and any other value is refused too. At patch, v0.2.0 to v0.2.1 merges and v0.3.0 does not; at minor, v0.3.0 merges (and every patch) and v1.0.0 does not; at major, v1.0.0 merges as well. A level only limits what merges: a pull request beyond it is left for you, and a release within the level is installed meanwhile (see below).

What the guard checks. The pull request merges only when every one of these holds, and otherwise it is left for a human with one reason line:

• the pull request's author is dependabot[bot];
• the config at the pull request's base commit has auto_update: true;
• the diff changes nothing but pin lines: every changed file is one of the two callers, each changes one uses: yveshanoulle/forsgren/.github/workflows/...@<sha> # vX.Y.Z line to another, and a caller pins the workflow it calls (metrics.yml in forsgren.yml, auto_update.yml in forsgren-update.yml);
• the pins move from the same version to the same version and commit in every file, and when the repository has both caller files at the base commit, the pull request moves both (a pull request that moves only one is left for you, #61);
• the new version is a release version (vX.Y.Z), an upgrade of the old one, and within auto_update_level;
• forsgren has a published release for the new version, not a draft and not a prerelease, and its tag points at exactly the pinned commit.

check-update is the command the workflow runs:

forsgren check-update --config forsgren.config.yml --repo <owner/name> --pull <number>

--config is the installation's config file (the caller files are looked up next to it, which in the workflow is the checkout of the base commit), --repo the data repository and --pull Dependabot's pull request in it (1 or more). It reads the pull request, its files and forsgren's release with GITHUB_TOKEN, which needs pull-requests: read, and prints one line, or two for exit 3:

• exit 0: merge <old> to <new>, for example merge v0.2.0 to v0.2.1;
• exit 1: left for a human: <reason>, for example left for a human: v0.2.1 to v0.3.0 is a minor update; auto_update_level is patch. With auto_update off it prints left for a human: auto_update is off and asks GitHub for nothing;
• exit 3: install <old> to <new> at <sha>, then the exit 1 line, for example install v0.2.1 to v0.2.2 at 0123456789abcdef0123456789abcdef01234567 and left for a human: v0.2.1 to v0.3.0 is a minor update; auto_update_level is patch. It is given only when every check passed but the level (the pull request goes further than auto_update_level allows) and forsgren has a release that is newer than the installed version, within the level, published (not a draft, not a prerelease) and a release version; <new> is the newest such release and <sha> the commit its tag points at. With no such release it is exit 1, as before; any other reason to leave the pull request never looks at the releases;
• exit 2: a usage, config or network error, with the message on stderr and nothing on stdout (a flag missing or invalid, a config that is invalid, an answer of GitHub that is an error, or a pull request with more files than forsgren reads).

A release within the level (install-update). Dependabot proposes only the newest release, so with auto_update_level: patch and v0.2.1 installed, v0.3.0 is left for you while the patch release v0.2.2 would have been safe. On exit 3 the workflow installs v0.2.2 itself, with forsgren install-update:

forsgren install-update --repo <owner/name> --branch <branch> --version <vX.Y.Z> --sha <40-hex>

--repo is the data repository, --branch its default branch, --version the release to install and --sha the commit its tag points at (both taken from check-update's first line, which the workflow checks against a release version and 40 lower-case hex digits first). It reads each caller file as it is at the head of the branch, through the API, because the branch moves daily with data commits and the pull request's base commit may be stale; moves the pin of each caller file that exists there to the release; and writes all of them in one commit, forsgren: install <version> within auto_update_level (forsgren#62), that follows the head it read the files at. The branch is moved without force, so a branch that moved meanwhile, or is protected against the job's token, fails the command with the branch unchanged. It reads GITHUB_TOKEN, which needs contents: write, and prints installed <version> on <branch> as <commit>:

• exit 0: installed;
• exit 2: a usage error (a flag missing or invalid, named on stderr), an answer of GitHub that is an error, a caller file without exactly one pin line of its workflow, or no caller file at the head of the branch. A caller file that is not there is skipped.

Then the workflow starts forsgren.yml, as it does after a merge (a commit made with the job's token triggers no other workflow), and the bigger pull request stays open: Dependabot refreshes it, and merging it is yours. The job summary holds both lines of check-update's output. A failing install-update fails the run and starts nothing.

What you see. When the pull request is left for you, the workflow puts the reason in the run's job summary, the run stays green and nothing is merged: review the pull request and merge it yourself if it is fine. When check-update fails (exit 2) or the merge fails, the run fails, and a failed merge starts nothing. When a release within the level is installed instead, the summary says so and why the pull request stays open, and the run is green.

The caller grants three permissions, all write, because a called workflow can only keep or narrow what its caller's job grants: contents: write to merge or to write the install commit, pull-requests: write to merge the pull request and actions: write to start forsgren.yml. The last is needed because a merge made with the job's token triggers no other workflow, so without the explicit start the merged update would wait for the next daily run. The workflow declares no permissions block of its own.

The template's Dependabot setup. The template's .github/dependabot.yml groups the pins of both caller files into one pull request, checks every day at 04:00 UTC, weekends included (interval: cron, cronjob: "0 4 * * *"; interval: daily runs Monday to Friday only), and waits 3 days after a release before it proposes it (a cooldown).

To switch auto-update off, set auto_update: false in forsgren.config.yml (or remove the key). Dependabot still opens its pull request, forsgren-update.yml runs and leaves it for you with auto_update is off, and merging it is the update, as before (see Configuration).

Working on forsgren

./FBP.sh "<message>" (FBP = FullBuildAndPush) is the one command for a change:

gofmt -w over the Go files, ./sfl.sh pre, Scripts/build_site.sh, ./sfl.sh post, then git add -A, a commit, and a push only when every phase is green. An ordinary red still commits locally, with the subject *** RED **** and the message in the body, so work is never lost, and skips the push. A secret-class red (the secret scan, the data guard or the private-names gate) commits nothing at all. ./FBP.sh --no-commit runs the gates and the build only. Every commit it makes, green or *** RED ****, is signed off (git commit --signoff): git adds a Signed-off-by: trailer for the committer identity, yours from user.name and user.email, or agent-Friend's under Scripts/fbp_agent_friend.sh. That is the Developer Certificate of Origin sign-off the DCO check on pull requests asks for (see CI and CONTRIBUTING.md).

Its closing summary prints the message, one row per phase with the gate counts and the page count, and every failure's reason. A run ended by TERM, INT or HUP ends with Aborted ❌ (<signal>, exit <n>) (143, 130, 129), never All checks passed.

./sfl.sh pre|post runs one phase of the gates. Before PRE it runs git pull --ff-only and stops (exit 3) when that cannot fast-forward, then installs the tools (see Installing and updating), runs npm ci when the npm linters are missing, and exports the Go pin. It runs every gate of the phase even after a failure, prints a step table and an Errors: block with each failed gate's reason, and exits 0 green, 1 red, 2 on a secret-class red.

Scripts/gate_report_order.txt declares every gate, one row <label>|<script>|<phase>|<class>: the label sfl and CI print, the script that runs, pre or post, and secret-class or nothing. A gate this repo does not have is a row <label>|n/a|<reason>. sfl and CI both run the rows in file order, so the file is the one list.

Adding a gate: write the script and its self-test (Scripts/test_*.sh, red first, plus a mutation proof), give each a row at its position in the order file (the self-test in PRE, before its gate), add any Homebrew tool it needs to Scripts/required_tools.txt, and describe it below. Scripts/test_sfl_drives_from_order_file.sh is red on a Scripts/test_*.sh no row declares, and the gate-wiring gate on a script neither runner runs.

Quality gates

./FBP.sh runs the gates in two phases around the build: ./sfl.sh pre checks the repository before the site is generated, Scripts/build_site.sh renders the site into .build/site, and ./sfl.sh post checks that generated output. Scripts/gate_report_order.txt declares every gate, its phase and its order; a gate's self-test always runs in PRE, before the gate it validates.

Three PRE gates come first and are secret-class, so a finding blocks the commit itself:

• secret scan (Scripts/check_secrets.sh, the estate's gitleaks gate): gitleaks over the working tree, before anything is staged, under .gitleaks.toml (the default rules, with ${{ secrets.NAME }} references allowed, since they are names, not values). Red, never skipped, when gitleaks is missing. Its self-test (Scripts/test_check_secrets.sh) plants a key and shows it caught.
• data guard (Scripts/check_data_guard.sh): see Where configuration and data live.
• private names (Scripts/check_private_names.sh): this repository is public, so no tracked or untracked (not ignored) file or path may name a private repository. The list of names is kept outside the repository: in the file ~/.config/forsgren/private-names (or the file FORSGREN_PRIVATE_NAMES_FILE points to), one name per line, # for comments; that file is the source of truth. In CI the Actions secret FORSGREN_PRIVATE_NAMES, the same names newline-separated, which quality.yml passes to the PRE step through env, and the Dependabot secret of the same name are synchronized copies, never edited on their own: after changing the file, run ./Scripts/sync_private_names_secrets.sh by hand (it needs the maintainer's gh login) and it sets both. An external fork pull request receives neither secret, so the gate fails there (exit 2, no list); that is intended: CI always fails without the secret or with an emptied one. The gate searches git ls-files and git ls-files -o --exclude-standard (what git add -A would stage), case-insensitively, for a substring (a listed name inside a longer token is a hit). Its failure line names file:line, or tracked path #N in git ls-files, and never the name, so the gate's own output reveals none. A commit message is checked too: FBP.sh hands it to Scripts/check_private_names.sh --message <file> (the same list and matching, a temp file, no repository scan) first of all, and on a hit it makes no commit, runs no gate, prints one ❌ line that never holds the name or the message, and exits non-zero; with no list or an empty one the message check passes. No list, an env list with no names, a missing names file, or no tracked file is exit 2 and a red, never a silent pass; locally an existing names file with no names passes with 0 names searched. Known limit: names are matched as bytes in each file's own encoding, so a file in an encoding that is not ASCII-compatible (UTF-16 or UTF-32, for example) is not searched effectively: a name in it is not found and the file passes. The names never touch the disk: the gate hands them to grep through a process substitution, not a temp file. Its self-test (Scripts/test_check_private_names.sh) uses made-up names and proves with a mutant that prints the matched line that the no-name check can fail. Locally, FBP.sh creates an empty list file when none exists, so the gate passes with 0 names searched; CI never does.

Two PRE gates check the page templates and the pages they render:

• html duplication (Scripts/check_html_dupl.sh, the estate's ratchet from another estate repository): jscpd measures the share of duplicated markup in the html/template files under internal/page/templates and the gate compares it to a recorded ceiling, today 0.00%. The ceiling only moves down: a red is fixed by removing the duplication, never by raising the number. Red on a run that scanned zero .html files. jscpd is pinned like the linters below.
• golden pages (Scripts/check_golden_pages.sh, forsgren's own, forsgren#12 step 8): the build renders the page without an installation's config or history, so the POST gates below never see the page with data or the no-projects line. This gate runs three of them, HTMLHint, privacy posture and html duplication, generated page, on each golden page of internal/page/testdata (the pages the Go tests pin byte for byte to what forsgren renders, the page with data from a made-up history), each page alone as the site's one page is. A finding names the page and the gate. Red on a directory with no golden page.

Two PRE gates run the Go tests and the formatting:

• Go tests (Scripts/check_go_tests.sh): go test ./... over the module. Red on a failing test, on a run that found no test at all, and on a package under node_modules (go.mod's ignore node_modules is what keeps npm's vendored Go out of ./...; this is its guard). A green run leaves the coverage profile the Go coverage gate reads.
• gofmt (Scripts/check_gofmt.sh): check-only, gofmt -l over every Go file git tracks or would add; red naming each unformatted file, and on no Go file found. ./FBP.sh runs the same script with --fix before the gates, so locally it sees a formatted tree; CI never fixes.

Seven more PRE gates check the Go code:

• go mod tidy (Scripts/check_go_mod_tidy.sh, another estate repository's check made check-only): red when go.mod or go.sum is not what go mod tidy would write, a require missing or unneeded, a go.sum line missing or stale, with the diff tidy would apply. It runs go mod tidy -diff, so it never rewrites either file; the fix is go mod tidy, committed with the change that needed it. Red, as a tool error, when tidy could not run (a go.mod it cannot parse, a module it cannot fetch). Its self-test (Scripts/test_check_go_mod_tidy.sh) runs offline and shows, by mutation, that -diff is what makes the gate red instead of a silent rewrite.
• Go lint (Scripts/check_go_lint.sh, another estate repository's): golangci-lint over the module under .golangci.yml, ported from another estate repository shared/, its strictest module: govet, errcheck, staticcheck, gosec, dupl (80 tokens), funlen (60 lines, 40 statements), lll (120), gocognit (10) and gocyclo (above 6 is red), plus the gofmt and goimports formatters, test code included. revive is enabled too but runs no rule: the config's one entry, which disables exported, replaces revive's default rule set (as in another estate repository; an open point on forsgren#1). No issue cap, so every finding is listed. Unlike shared/, gosec's G101 (a hardcoded credential) is not excluded. A finding is fixed in the code: an exclusion or //nolint needs Yves's approved issue. Red on a module with no Go package, and when golangci-lint could not run. Its self-test (Scripts/test_check_go_lint.sh) shows complexity 7 red (in a test file too) and 6 green, a credential red under G101, and, by mutation, that the threshold and the missing G101 exclusion in .golangci.yml are what decide those cases.
• Go test duplication (Scripts/check_test_dupl.sh, another estate repository's): the same dupl rule pointed at _test.go files only, which .golangci.yml leaves to it, so test code is judged once. Red on a module with no test file.
• Go file length (Scripts/check_file_length.sh, another estate repository's check_file_length.py rewritten in bash and awk): red when a Go production file is longer than 600 lines, each such file named with its count, longest first. _test.go files are not judged; a generated file is; a last line without a newline counts. The files are the module's own as go list ./... sees them, so node_modules (ignored in go.mod) is never judged and a file only another GOOS builds is. Red on a module with no production .go file. Its self-test (Scripts/test_check_file_length.sh) shows 601 lines red and 600 green, and, by mutation, that the comparison, go.mod's ignore line and the GOOS-bound file list are what decide those cases.
• Go coverage (Scripts/check_coverage.sh, another estate repository's check_coverage.py rewritten in bash and awk): the coverage ratchet. Every function go tool cover -func measures has a floor in coverage_thresholds.json, and the total has one too. Red when a function or the total is below its floor, naming it with both numbers, and when a measured function is not registered: register it at 0.0, never a guessed floor (0.0 is tracked, not enforced). A floor below the ratchet rule, measured − 0.1 or exactly 100.0 at 100 %, stays green and is counted into one FLOORWARN: N coverage floor(s) should be raised line, each such function listed with the floor to set. Floors only go up: a red is fixed by testing, never by lowering a number. It reads the profile the Go-tests gate writes (.build/go-coverage.out), so the tests run once; that gate removes the profile when it is red, and no profile is red here. The thresholds file is read in one fixed shape, one "key": number per line, and a line outside it is red. Its self-test (Scripts/test_check_coverage.sh) shows each of those cases and, by mutation, that the floor comparison, the 0.1 buffer and the Go-tests gate's removal of a red run's profile are what decide them.
• Go vulnerabilities (Scripts/check_govulncheck.sh, another estate repository's): govulncheck over the module, red when the code reaches a symbol the Go vulnerability database lists, naming each entry. When the database does not answer (curl -sf --max-time 5 https://vuln.go.dev/index/db.json fails: offline, refused, a timeout, an HTTP error) the check is skipped, as in another estate repository: one ⚠️ SKIP: govulncheck did not run line naming the database, a ::warning:: in GitHub Actions, exit 0, and never the OK line of a pass. FORSGREN_VULN_DB points it at another database. Its self-test (Scripts/test_check_govulncheck.sh) runs offline against a database it writes, with one made-up entry, and shows a call to the listed symbol red, an unreachable database a skip and, by mutation, that the probe is what makes offline a skip rather than a tool error.
• Go dead code (Scripts/check_deadcode.sh, another estate repository's): deadcode -test ./..., red on any function, exported or not, that neither a main package nor a test reaches, each named with its file and line. The fix is to delete it, never to call it from a test to keep it alive. Red on a module with no main package and when deadcode could not run (a module that does not compile). Its self-test (Scripts/test_check_deadcode.sh) shows both kinds of dead function red, a test-only helper green and, by mutation, that -test is what keeps it green.

Go lint, Go test duplication, Go vulnerabilities and Go dead code run the golangci-lint, govulncheck and deadcode pinned in go.mod (see Installing and updating).

Seven PRE gates read the repository's own scripts and files:

• actionlint (Scripts/check_actionlint.sh, the estate's gate in coachretreat-website's copy): every .github/workflows/*.yml file under .actionlint.yaml. Valid YAML is not a valid workflow: actionlint knows which contexts exist where (a runner.temp in a job-level env: block once made GitHub reject another estate repository's whole workflow, so not one gate ran), which keys a step takes, and which runner labels exist. Every job here runs on a GitHub-hosted image, so .actionlint.yaml declares no custom label: a custom label (a self-hosted runner's) is red until it is declared there, and declaring one is configuration, not a waiver. actionlint also runs shellcheck over every run: block, and its self-test (Scripts/test_check_actionlint.sh) is red when that does not happen, since actionlint skips it silently when shellcheck is missing. No -ignore flag: a suppression needs a finding someone has looked at and Yves's explicit yes. One exists: .actionlint.yaml ignores, for .github/workflows/metrics.yml only, actionlint's "not defined" on the documented job.workflow_sha and job.workflow_repository, which actionlint 1.7.12 does not know yet (rhysd/actionlint#705); approved on forsgren#4, to be removed once an actionlint release knows them. Red on a directory with no workflow file, and when actionlint itself is missing.
• zizmor (Scripts/check_zizmor.sh, another estate repository's gate): the GitHub Actions security linter, over .github under .github/zizmor.yml, every .yml and .yaml workflow. actionlint asks whether a workflow is valid, zizmor whether it is safe; the class it exists for is template injection, an attacker-controlled ${{ ... }} (an issue title, a branch name) expanded into a run: block, where it runs as shell with the job's token on the runner. It runs at another estate repository's setting: offline, High findings only, the default persona. A Medium finding such as a checkout that keeps its credentials is not its red; checkout pins owns that rule. The config suppresses nothing: a suppression needs a finding someone has looked at and Yves's explicit yes recorded on a GitHub issue. Red on a directory with no workflow file. Its self-test (Scripts/test_check_zizmor.sh) shows each of these, with two mutation proofs: the severity threshold is what keeps a Medium out, and the config is read from the scanned directory.
• shellcheck (Scripts/check_shellcheck.sh, the estate's gate from another estate repository): every tracked *.sh file, and every tracked file without an extension whose first line is a bash or sh shebang, at any depth. The targets come from git ls-files, so a new script is checked the moment it is tracked, with no list to keep up to date. Red on any finding, and on a run that found no script. No script is excluded, and an empty EXCLUDE_ALLOWED is the normal state. An exclusion needs three things: the entry in the gate's EXCLUDE_ALLOWED, a sentence here naming the script and the reason, and Yves's explicit yes recorded on a GitHub issue, which that sentence links. A finding is fixed in the script. The same rule holds for a single line: it may carry a # shellcheck disable=SCxxxx only with a comment giving the reason, and with Yves's explicit yes recorded on a GitHub issue, which that comment links.
• yamllint (Scripts/check_yamllint.sh, from another estate repository): every tracked .yml and .yaml file under the rules in .yamllint.yml (another estate repository's). konenki lints its workflow directory by name; here the targets come from git ls-files, as for shellcheck, so the workflow and any other YAML are covered the moment they are tracked. .yamllint.yml is itself tracked YAML and is linted too, so the list is never empty, and a run that found none is red.
• stray tracked files (Scripts/test_no_stray_tracked_files.sh, another estate repository's): red on a tracked .DS_Store at any depth, and on a tracked .yml/.yaml with a top-level jobs: key anywhere GitHub would not run it (outside .github/workflows/, or in a subdirectory of it): a workflow copy nobody lints and nothing runs. It first proves its matcher on a scratch repository holding one offender of each kind.
• script references (Scripts/check_script_references.sh, another estate repository's guard): red when a script, workflow, order or tool file, or doc names a Scripts/ path that does not exist, checked case-sensitively, so a path that macOS forgives but GitHub does not is caught too. Red as well on a script that nothing calls: no script, workflow or order-file row mentions it, and CLAUDE.md does not list it as run by hand. Red on a run that scanned no file or found no Scripts/ path at all. Another repository's script is written with that repository as the first part of its path (source-repo/Scripts/...) and is not checked; a bare Scripts/ path is read as forsgren's own. Unlike the gates above, it reads the working tree, untracked files included. It also keeps Scripts/ flat: a script (.sh or .py) in any subfolder of Scripts/ is red. Another estate repository bans scripts that climb to the root with ..; Yves ruled that ban N/A for forsgren while Scripts/ is flat, because every script then reaches the root with the same single step (forsgren#1, 2026-10-01). This gate enforces the condition the ruling rests on, so a script subfolder means revisiting the ruling first. Data files in a subfolder are not scripts and stay allowed.
• checkout pins (Scripts/test_workflow_checkout_pins.sh, the estate's gate in coachretreat-website's copy): every uses: in a .github/workflows/*.yml file ends in a full 40-hex commit SHA, never a tag (@v4), a branch (@main) or a short SHA, because a tag or a branch is resolved when the runner fetches it and its owner can re-point it. The version goes in a comment after the SHA (# v7.0.1), by convention: the gate does not check it. A local action (./...) is this repository's own code and is skipped; a docker:// reference has no exception and is red. Every actions/checkout must also set persist-credentials: false, so the job token is not left in .git/config for later steps. Red on a directory with no checkout or no uses: at all. Its proof (Scripts/test_workflow_checkout_pins_mutations.sh, row mutation: checkout pins) runs first and shows each kind of bad ref rejected for its own reason.

actionlint, zizmor, shellcheck and yamllint come from Homebrew, through Scripts/required_tools.txt (see Installing and updating). As with the data guard, untracked files are not checked: git add -N a new script first.

The POST gates, on the generated site:

• HTMLHint (Scripts/gate_htmlhint.sh): every .html file under the rules in .htmlhintrc. Red on a finding, and on a run that scanned zero files, since nothing linted is not clean.
• Stylelint (Scripts/gate_stylelint.sh): every .css file under .stylelintrc.json (stylelint-config-standard plus another estate repository's overrides). Red on a finding, and on a glob that matches no file.
• html duplication, generated page (Scripts/check_html_dupl_site.sh): the same ratchet over .build/site, with its own ceiling, today 0.00%, measured one page at a time (every .html under the site, subfolders too, each staged alone, as the golden-pages gate does). It catches what the template scan cannot see, such as a page template that pastes the header instead of calling it. Pages rendered from one layout repeat its chrome, so measuring them as one set would red the ceiling with clean templates; duplication within a page is still held to 0.00%, and a red names the page by its path in the site. A tooling failure (the measuring script ending other than 0 or 1, or mktemp -d failing) is exit 2, never a red over the ceiling.
• lint coverage (Scripts/check_lint_coverage.sh): each linter opened every .html and .css file the site ships, no fewer and no more. A glob that stops matching is a smaller job that still reports success; this is the gate that notices.
• required pages (Scripts/validate_required_pages.sh and Scripts/test_required_pages_covers_site.sh): the pages the site must ship are listed, hand-authored, in internal/page/required-pages.json (today /, /legend.html, /settings.html, /issues.html, /standard/, /numbers/ and /scoring/). The first checks that list's shape: valid JSON, a non-empty requiredPages array of root-relative paths, no scheme or host, no .., no duplicates. The second checks it against .build/site: every .html file there, in subfolders too, is listed (standard/index.html as /standard/), and every listed page was generated. Both are red on a missing file or an empty list, and the second on a site with no .html page at all. A new page means a new line in the list, in the same commit as its template.
• privacy posture (Scripts/check_privacy_posture.sh, the estate's gate from another estate repository): the page collects nothing. Red on a form, an iframe, a script or stylesheet loaded from another host, a CSS url() pointing off-site, document.cookie, localStorage or sessionStorage, and a known analytics snippet. A green run lists what the page does load (self-hosted fonts) and the hosts it links to, so the verdict can be read rather than trusted. An outbound link is not a finding: it sends nothing until someone clicks it.
• repository links (Scripts/check_repo_links.sh, forsgren's own): no github.com/<owner>/<repo> path anywhere in the generated .html or .css, linked or as text. The gate cannot tell a private repository from a public one, and the page has no reason to point into either. Red on a site with no .html page. One narrow exception (Yves's ruling on forsgren#41): an href to exactly https://github.com/yveshanoulle/forsgren, with an optional #anchor, the footer's link to the tool's own public repository; acme-data, forsgren-template (its footer link left in forsgren#45), forsgren/issues, any other path or owner, and the same path as plain text or in a url() stay red. The failure line names the file and line, never the path it matched, so a private repository's name cannot reach a commit message.
• community files (Scripts/check_community_files.sh, forsgren's own): CODE_OF_CONDUCT.md exists at the repository root and names the reporting address conduct@hanoulle.be; SECURITY.md exists and names the private reporting route (the Security tab's "Report a vulnerability", or the advisories URL); neither has a template placeholder left (any bracket that is not a Markdown link); and this README links both in plain Markdown, not inside a code block, a code span or a comment. Every finding is reported in one run.

forsgren has no privacy-pages gate: that one is another estate repository's, pinning the content of a privacy policy forsgren does not serve. The order file declares it n/a with its reason, and the privacy posture gate keeps that reason true.

A finding in the generated page is fixed in the template under internal/page/, never by loosening a rule in the config.

CI

.github/workflows/quality.yml runs the same gates as ./sfl.sh, on every push to main, on every pull request into main, and by hand (Actions → Quality → Run workflow).

What runs where. Locally, ./FBP.sh runs gofmt -w, ./sfl.sh pre, Scripts/build_site.sh and ./sfl.sh post. CI runs the same three phases with nothing fixed: Scripts/run_ci_phase.sh pre, then Scripts/build_site.sh into .build/site, then Scripts/run_ci_phase.sh post. Both read Scripts/gate_report_order.txt with the same row rules, so every gate runs in both, in the same order, under the same label. Before the gates, CI checks out the commit, puts Homebrew's directories first on PATH and exports GOTOOLCHAIN from go.mod (as sfl.sh does), runs Scripts/install_tools.sh (as sfl.sh does) and npm ci. The runner is a fresh machine on every run with none of the Homebrew tools the gates need, so the installer puts them there; installing and upgrading costs nothing lasting on a machine that is thrown away after the job. A tool still missing after it fails the Install tools step by name.

Check-only. CI reports what the commit contains. gofmt runs as gofmt -l (the gofmt row), never with --fix, and a gate that changes the checked-out tree is a red row, even when it exits 0. That is how CI treats npm audit: locally Scripts/npm_audit_check.sh may heal an advisory with one npm audit fix and the new package-lock.json rides into the commit; in CI the same heal is red, naming package-lock.json. Run ./FBP.sh and commit the result.

Failures. A failing gate does not stop its phase: every row runs, so one run reports every failure, as sfl.sh does. The build runs after an ordinary PRE red too; it is skipped after a secret-class finding (the secret scan or the data guard), as FBP.sh skips it, and the POST gates are skipped when the build did not succeed. The job's summary page lists every gate in the order file's order, ✅, ❌ or n/a, with each gate's output below the table. Gates that did not run are counted as unmeasured, never as passing.

The run summary. Above that table, every run page opens with the run's key numbers (forsgren#8), written by the job's last step, which runs after a failure or a cancel too: the status (succeeded, failed or cancelled, and the phase it stopped in), the gates passed, failed and skipped in PRE and in POST, the Go tests passed, the total checks (every individual check that ran, counted once: each case of every self-test and gate, each Go test, and a gate with no case lines as one; passed and failed), the coverage total with its floor, the floors to raise (the coverage gate's FLOORWARN count), the pages generated, the forsgren version, the commit and trigger (push, pull request with its number, or by hand) and the duration. Scripts/render_quality_summary.sh reads them from what the run already wrote (the gate rows and outputs, the page-count sink, cmd/forsgren/main.go) and from the job's status and step outcomes, passed through env:. A number that does not exist, from a phase that never ran or an output that is missing, shows as — with the reason, never as 0. The total checks read each gate's output with one case-line grammar, written out in the renderer: a closing verdict (OK: …, ✅ test_x, FAIL: … contract) is never a case; a phase that never ran makes the total — naming it, never a partial sum; a gate that never reported is named as skipped, and a gate whose case lines are in a format the grammar does not know is named rather than counted silently. Adding a self-test or a case raises the number.

From a red CI row to a local run. A CI row carries the label sfl prints, and the order file names the script and phase behind it:

grep '^gofmt|' Scripts/gate_report_order.txt   # gofmt|Scripts/check_gofmt.sh|pre|
./Scripts/check_gofmt.sh                       # that one gate
./sfl.sh pre                                   # or the whole phase

A POST gate reads .build/site, so run ./Scripts/build_site.sh first.

The runner. The job runs on GitHub's hosted macos-latest image (runs-on: macos-latest), a fresh virtual machine per run, thrown away after it (Yves's ruling on forsgren#1, road to public: the runner swap). It has Homebrew and a Go to start from; everything else comes from Scripts/install_tools.sh, npm ci and the go.mod pins, as locally.

On pull requests, safely. Quality triggers on pull_request into main, so a contributor's pull request shows the same gate results as a local ./FBP.sh run, and never on pull_request_target. A pull request from a fork runs its own code here, which is safe only because of the two things the ruling pairs with the trigger: the machine is GitHub's and is thrown away after the job, and a fork's pull_request run gets a read-only token (contents: read) and no secrets. The quality trigger scope gate pins this job to macos-latest, and the rule holds for every workflow: the workflow triggers gate below is red on any of them that triggers on a pull-request event while one of its jobs runs anywhere but on a GitHub-hosted runner. A new push to a pull request cancels its run in flight; runs on main are never cancelled, each commit gets its own.

Repository settings behind the gates. On top of that, GitHub holds every workflow run of a pull request from an outside contributor until the maintainer approves it, and the repository requires every action to be pinned to a full commit SHA, the rule checkout pins checks in the files. Secret scanning with push protection and Dependabot alerts are on too, behind the secret scan and npm audit gates. These are settings, not files: no gate can see them.

The DCO check, on pull requests. .github/workflows/dco.yml triggers on pull_request (never pull_request_target), as Quality does, and may because its one job runs on a GitHub-hosted runner (ubuntu-latest), with a read-only token (contents: read, pull-requests: read). It holds every commit of the pull request to the Developer Certificate of Origin (see CONTRIBUTING.md): Scripts/check_dco.sh is red on a commit with no Signed-off-by: trailer, or with one whose email is not the commit author's, naming the commit and its subject. A trailer counts only as a whole line of the message's last paragraph, never in the body, mid-line or as the subject; the emails are compared without case and never printed. Merge commits get no exception. Bots are (ruled 2026-10-02, for Dependabot's security updates): a commit is exempt, named as such, when GitHub links it to an account of type Bot and that bot opened the pull request (pull_request.user, passed through env:). Never on the commit's author email, which anyone can write, nor on the linked account alone, which GitHub derives from that email. The job never checks out the pull request's code: it reads the commit list through the API (gh api, the pull request number passed through env:, never as ${{ }} inside run:), and checks out only Scripts/check_dco.sh, at the pull request's base commit, so a pull request cannot change the check that judges it. A pull request can still change dco.yml itself, which GitHub reads from the pull request: the review of such a change is the guard there. The check does not run in sfl or Quality, since a commit on main has no pull request; its self-test does (DCO sign-off self-test, Scripts/test_check_dco.sh, offline, with mutation proofs for the last-paragraph rule, the email comparison, the account-type rule and the opener comparison), and gate wiring is red when dco.yml stops running the check or the self-test loses its row.

The metrics workflow, for installations. .github/workflows/metrics.yml is the reusable workflow a data repository calls daily (see Running forsgren). It triggers on workflow_call only, so it never runs in this repository and no pull request can start it. Its one job runs on ubuntu-latest, in the caller's repository and with the caller's token, checks out the caller's repository only (never forsgren's), and asks for pages: write, id-token: write and contents: write (the starter step and the data step each push one commit) and, optionally, pull-requests: read (forsgren#40), all as the caller grants them: the workflow has no permissions: block, so its job takes exactly what the caller's job grants and a caller that has not added the optional one still starts (a token without it is a 403 the lookup of the waiting Dependabot pull request treats as unknown). Its concurrency group is the caller's repository, cancel-in-progress: false. It takes no inputs: the caller's uses: …/metrics.yml@<commit> line is the only version. Its one secret, FORSGREN_TOKEN, is optional and reaches the collect step's env: only. Its steps: set up Go (actions/setup-go on exactly go.mod's toolchain, cache: false), check its own job.workflow_sha is a full 40-digit commit and its own job.workflow_repository one owner/name, then go install github.com/<that repository>/cmd/forsgren@<that commit>, check out the caller's repository (actions/checkout, pinned at Quality's commit, persist-credentials: false), forsgren init-config --config forsgren.config.yml and, when it created the file, one commit of that file alone as github-actions[bot], pushed to the branch the run is on with the token in git's environment only (so it is in no argument, file or log and the checkout still stores nothing), forsgren check-config --config forsgren.config.yml (its message printed between ::stop-commands::<token> and ::<token>::, a fresh random token per run, so a line of it that starts with :: never runs as a workflow command), forsgren collect --config forsgren.config.yml --data data/deployments.csv (its output shown with workflow commands stopped, its exit status kept as a step output), a commit of data/ alone when it changed, pushed like the starter (an ::error naming a branch that moved, never a rebase or a force), forsgren render --config forsgren.config.yml --data data/deployments.csv, then actions/upload-pages-artifact and actions/deploy-pages into the github-pages environment, and last a step that fails the job when collect failed. The job context, not the github context: in a called workflow the github context is the caller's. setup-go exports GOTOOLCHAIN=local, so go install builds with that Go and never switches to another. The commit and repository reach the shell through env:, never as ${{ }} inside run:. The two checks are regexes inside the workflow, not a script under Scripts/: the job has no checkout of forsgren, and the only commit it could fetch one at is the one still unchecked, and the starter and data steps' logic is the commit and the push, which only git can do. The metrics workflow pin below executes those very blocks, the starter and data steps with a real git against a local remote. Nothing in this repository runs the workflow, so no gate does; the pin and actionlint, zizmor, yamllint, checkout pins and workflow triggers, which read every workflow, are what check it.

No paths filter, on purpose. The secret scan, the data guard, stray tracked files and script references read every tracked file, so a filter on paths would leave some change that runs no gate.

Six PRE gates keep the CI honest:

• gate wiring (Scripts/test_gate_wiring.sh, another estate repository's, adapted): every runnable row of the order file has phase pre or post (any other phase runs in neither); FBP.sh and quality.yml each run PRE, the build and POST in that order; sfl.sh and Scripts/run_ci_phase.sh read a row with the same rules; every script that no row names is a declared exemption with the runner it must still be run by. It also runs run_ci_phase.sh itself, over the real order file with a stub at every declared path (each row must run exactly once, in its own phase, in file order) and over made-up order files (failures, the secret-class exit, the tree check, a phase with no row).
• quality trigger scope (Scripts/test_quality_trigger_scope.sh): the workflow runs on every push to main and every pull_request into it, neither with a paths or paths-ignore filter, never on pull_request_target, and on workflow_dispatch; and its job runs on macos-latest, the GitHub-hosted image that makes the pull-request trigger safe.
• workflow triggers (Scripts/check_workflow_triggers.sh, forsgren's own): no workflow in .github/workflows triggers on pull_request, pull_request_target, pull_request_review or pull_request_review_comment (the two review events also run a fork's code) while one of its jobs may run on a self-hosted runner. A job counts as GitHub-hosted only when its runs-on is a single GitHub image label (ubuntu-*, windows-*, macos-*); the self-hosted label, a custom label, a list, a runner group, an expression such as ${{ matrix.os }} and a reusable-workflow job are all judged as self-hosted, because the gate cannot prove otherwise. Red as well on a workflow whose on: it cannot read, and on a run that found no workflow file. It reads the YAML with awk, not a YAML library: PyYAML is a Python module, not a command, so nothing here installs it, and a parser that depends on it would stop gating on the first machine without it.
• metrics workflow (Scripts/test_metrics_workflow.sh, forsgren's own): metrics.yml triggers on workflow_call and nothing else, and declares no inputs; no run: block expands a ${{ }} expression; the step "Install forsgren from this workflow's own commit" takes FORSGREN_SHA from ${{ job.workflow_sha }} and FORSGREN_REPOSITORY from ${{ job.workflow_repository }}, and its run: block, executed here with a stub go, runs exactly go install github.com/yveshanoulle/forsgren/cmd/forsgren@<commit> for yveshanoulle/forsgren, installs github.com/acme/forsgren for the fork acme/forsgren, and refuses before go runs any commit that is not 40 lower-case hex digits (a tag, a branch, latest, a short or long hash, capitals, surrounding spaces, a trailing ;id or newline, empty) and any repository that is not one owner/name; actions/setup-go comes before that step and installs exactly go.mod's toolchain, so a toolchain bump in go.mod without one here is red; the step "Check out the caller's repository" uses actions/checkout at the commit Quality's checkout uses, with persist-credentials: false; the step "Check the caller's forsgren configuration", executed with a stub forsgren, runs exactly forsgren check-config --config forsgren.config.yml, fails the job on a refusal with the message in the log and after a cross mark in the step summary, and leaves no line of the message that starts with :: live as a workflow command, under a token that differs per run; the same step, executed with the real forsgren built from the checkout, is refused for a missing and an invalid forsgren.config.yml and passes a valid one; the starter step, executed with a real git against a local remote and with a stub and the real forsgren, commits a created forsgren.config.yml alone as github-actions[bot], unsigned even under a hostile inherited git environment, pushes it to the run's branch with the token in git's environment only (pin 13), exits 0 for a kept file before any branch logic and refuses on a tag, and the workflow has no permissions: block and names no pull-requests: permission (pin 16: a called workflow that asks for more than its caller grants stops the run, so it takes what the caller grants); workflow_call declares the one secret FORSGREN_TOKEN, required: false, and the only ${{ secrets… }} in the file is the collect step's env:; the collect step, executed with a stub and with the real forsgren, runs exactly forsgren collect --config forsgren.config.yml --data data/deployments.csv, records its exit status as the output status and succeeds, keeps the token out of arguments, files, the log and outputs, with no token passes the starter and records a failure naming FORSGREN_TOKEN for a configured repository, and, as the config step does, leaves no line of collect's output (both streams) that starts with :: live as a workflow command, under a token that differs per run, with the stub and with the real forsgren; the data step, executed with a real git against a local remote, commits nothing when data/ is unchanged (on a tag too), else one commit of data/ alone as github-actions[bot], unsigned even under a hostile inherited git environment, pushed to the run's branch with the token as pin 13 has it, refused on a tag, and failing with an ::error naming a branch that moved, with no rebase and no force; the last step fails the job for any collect status but 0, and collect failing after storing still commits and pushes; the job's concurrency group is keyed on github.repository with cancel-in-progress: false; the render step, executed with a stub, runs exactly forsgren render --out <dir> --config forsgren.config.yml --data data/deployments.csv, plus --latest <version> when the step before it found one; that step, "Look up the latest forsgren release", gets the job's token as GITHUB_TOKEN (never the caller's secret), outputs a plain version, and outputs nothing, never failing the job, for a lookup that fails or an answer that is anything else; the step after it, "Look up the waiting Dependabot pull request", does the same for a pull request number (also with the job's token, and asked only when a latest release was found) and outputs its check (ok, no-access, rate-limited, failed, or skipped without a latest release) from the status file the lookup wrote, anything else counting as failed, and the render step passes --waiting-pr <number> when it is set; the step "Write the run summary" appends forsgren run-summary's markdown to $GITHUB_STEP_SUMMARY and never fails the run (a run-summary that fails appends nothing); and install, checkout, starter, config check, collect, data commit and render come in that order, the fail step after publishing. Each pin is shown failing, with its own reason, on a mutant of the real file, judged by the pin it is aimed at.
• quality-report render (Scripts/test_render_quality_report.sh): the summary renderer (Scripts/render_quality_report.sh) keeps the declared order, exits 0 on a report it rendered, tells an empty or partial run from a clean one, and does not count an n/a row as a gate that should have reported.
• quality-run summary (Scripts/test_render_quality_summary.sh, forsgren's own): the run summary (Scripts/render_quality_summary.sh) renders every number of a green run, says where a red, cancelled or setup-stopped run stopped, names a pull request's number, exits 0 on whatever it is given, and shows — with the reason for a phase that never ran or an output that is missing, never 0; its total checks count every case-line format of the real gates once, each Go test once, no verdict line, a red gate's failures, and name a phase they are missing, a gate that never reported and a case-line format they do not know; shown failing, each with its own reason, on mutants that write 0 instead, that sum only the phases they have, that count verdict lines, and that drop the unknown-format guard.

Privacy

The public page shows numbers and dates only. It carries no issue titles and no links into private repositories, makes no third-party requests (no web fonts, analytics or CDNs: everything it loads is served with it), sets no cookies, uses no browser storage and tracks no one. Two POST gates check the generated page on every run, privacy posture for the requests, cookies and tracking, and repository links for the links (see Quality gates). No gate checks for issue titles yet: that rests on the renderer, which is given the project names of the owner's own config, numbers, durations and dates only: no repository name, commit SHA or message, tag, environment, workflow or task reaches the page, which cmd/forsgren/render_data_test.go and, for the commits of lead time, cmd/forsgren/render_leadtime_test.go pin. A finding is fixed in the template, never by loosening the gate.

Installing and updating

An installation's page names a newer release (forsgren#40). The page footer says "0.0.10 is available" when forsgren has a newer release than the one that built the page, and, when your caller grants pull-requests: read (see Running forsgren), "0.0.10 is waiting in pull request #N (merge it to update)" when Dependabot's pull request for it is open in your repository. Updating is merging that pull request; the template's calling workflow carries the permission line.

Run ./sfl.sh pre (or ./FBP.sh) and the tools install themselves. Scripts/required_tools.txt lists them, and Scripts/install_tools.sh installs each missing one with Homebrew and upgrades the ones already there. Homebrew must already be installed. Only the tools the quality gates use are listed.

Go is pinned separately. brew install go also upgrades an outdated Go for the whole machine, which would be a surprise if forsgren followed it. So forsgren does not: go.mod carries a toolchain line (for example toolchain go1.27.1), and sfl.sh and FBP.sh export it as GOTOOLCHAIN. Go then downloads that exact toolchain on first use and runs it, whatever version Homebrew installed. (The toolchain line alone is only a minimum, so the export is what makes the pin exact. Nothing is written to your global Go config.) Both scripts stop with a clear error if go.mod has no toolchain line.

To move to a new Go version, edit the toolchain line in go.mod, and nothing else, then run ./FBP.sh. Go downloads the new toolchain on the first run. Do not set the version anywhere else: go.mod is the only place it is written.

The Go tools are pinned in go.mod too. golangci-lint, deadcode (golang.org/x/tools) and govulncheck (golang.org/x/vuln) are tool lines in go.mod, with every module they pull in checksummed in go.sum, and the gates run them through go tool (Go builds each once and caches it), so CI and every machine run the same versions. They are never Homebrew tools, and never go install ...@latest: neither has a lockfile. To move one to a new version:

go get -tool github.com/golangci/golangci-lint/v2/cmd/golangci-lint@v2.15.0
go get -tool golang.org/x/tools/cmd/deadcode@v0.50.0
go get -tool golang.org/x/vuln/cmd/govulncheck@v1.8.0
go mod tidy

then run ./FBP.sh and commit go.mod and go.sum together (the go mod tidy gate is red when the go mod tidy is forgotten). A new version can bring new findings; they are fixed in the code like any other.

The npm linters are pinned in package.json. Node itself (and with it npm) is a Homebrew tool from Scripts/required_tools.txt, so like Go it follows whatever the formula publishes. The npm tools the gates use, htmlhint, stylelint and stylelint-config-standard, and jscpd for the html duplication ratchet, are not: they are devDependencies in package.json at an exact version (no ^ or ~), and package-lock.json pins every package they pull in. Both files are committed. ./sfl.sh runs npm ci when node_modules/.bin/htmlhint or node_modules/.bin/jscpd is missing: npm ci installs exactly what the lockfile says into node_modules/ (gitignored, never committed) and fails when package.json and the lockfile disagree. Never use npm install in a gate or a workflow, and never install the linters globally or run them through npx --yes.

Two gates keep it that way: npm manifest policy (Scripts/check_guardrail_packages.sh) is red on a version range in package.json, on a missing or gitignored package.json or package-lock.json, and on a tracked node_modules/; npm audit (Scripts/npm_audit_check.sh) is red on a high-severity advisory that one npm audit fix cannot heal and no ruled exception covers. When that fix does heal it, the changed package-lock.json rides into the commit.

Ruled exceptions to npm audit. An advisory with no fix can be excepted in Scripts/npm_audit_exceptions.txt, one line per advisory: advisory|package|re-check date|issue|reason. An exception needs Yves's explicit yes recorded on a GitHub issue, which its line names, like every suppression (see Quality gates). The gate reads npm audit --json (with jq, which macOS and GitHub's macOS images ship) and ignores a finding only while all of these hold: its GHSA ID and its package are listed; today is on or before the re-check date; npm audit --omit=dev does not report it, so every path to it runs through devDependencies; and npm offers no fix for that package without --force (its fixAvailable is false or SemVer-major). Each ignored finding is printed once, as excepted: GHSA-… (package) until <date>, <issue>. The exception ends by itself: the gate is red again, with a ❌ line saying why, once the date has passed ("re-check forsgren#13: is a fix out?"), on any other advisory, when the advisory reaches a production path, and when a fix without --force exists ("a fix exists: remove the exception and update"). An exception for an advisory npm no longer reports is a warning (remove the stale exception), not a red; a malformed line or an advisory listed twice is red before anything is audited.

Re-checked weekly (Yves, forsgren#13): a re-check date may be at most 7 days after today, and the gate is red on one further out, so nobody can set an exception a month ahead. A re-check means looking for a fix. When one is out, remove the line and update. When there is none, move the date forward by at most 7 days and add one line to the entry's history comment in the file (or note it on the issue). Today's one exception is GHSA-vfj7-8cjw-p6xm (braces <= 3.0.3, no patched version), which reaches forsgren only through jscpd and stylelint via fast-glob and micromatch (forsgren#13).

To move a linter to a new version, change its exact pin and the lockfile together, then run ./FBP.sh:

npm install --save-dev --save-exact stylelint@17.15.0

That one command rewrites the pin in package.json, re-resolves package-lock.json and updates node_modules/ (sfl's npm ci runs only when node_modules has no htmlhint or no jscpd, so it would not pick a bump up on its own; forsgren#2 tracks reinstalling on a lockfile change). Check that package.json still shows an exact version, and commit both files.

The tooling's own fixtures

The rest of the PRE rows test the build and gate tooling itself, so a broken runner cannot report green:

• sfl pull contract (Scripts/test_sfl_pull.sh): sfl pulls with --ff-only and stops with exit 3, naming the recovery command, when it cannot fast-forward.
• npm manifest policy self-test, npm-audit self-test and the other ... self-test rows: each drives its gate on made-up input before the gate runs.
• tool install self-test (Scripts/test_install_tools.sh): the installer installs a missing tool, upgrades a present one, and is red when Homebrew reports success but the tool is still not runnable, or the list is empty.
• Go toolchain pin self-test (Scripts/test_go_toolchain.sh): Scripts/go_toolchain.sh prints go.mod's toolchain version and is red without one.
• build-site self-test (Scripts/test_build_site.sh): the build compiles the binary, renders the site and writes the page count only on full success.
• gate-failure summary, step table (Scripts/test_summarize_gate_failure.sh, Scripts/test_render_step_table.sh): sfl's end-of-run reason lines and step table, with their counts.
• sfl drives from the order file (Scripts/test_sfl_drives_from_order_file.sh): sfl names no gate label itself, every row names an executable script, every Scripts/test_*.sh is declared by a row, and the secret scan, the data guard and the private-names gate each carry secret-class.
• FullBuildAndPush commit-message block and FullBuildAndPush build-site page count (Scripts/test_fbp_commit_message.sh, Scripts/test_fbp_build_pagecount.sh): the real FBP.sh, run in a throwaway repository with stub gates, prints its message, reaches PRE, blocks a secret-class commit with the right hint, signs off its green and *** RED **** commits as the identity that ran it (a commit that then passes Scripts/check_dco.sh), and fails the build row by name on a missing, unreadable, non-numeric or zero page count.

Status

The bootstrap is done (forsgren#1, 2026-10-02): the build, the gates, CI and these docs. Since then collect reads GitHub into the history file: the deployments of the configured projects and the commits they shipped. The page shows each project's deployment frequency, lead time for changes, failed deployment recovery time, change fail rate and deployment rework rate. Installations start from the forsgren-template repository and take each new release as a Dependabot pull request. forsgren is open source, under EUPL-1.2 (see Licence).

Licence

forsgren is licensed under the European Union Public Licence v. 1.2 (EUPL-1.2): see LICENSE. Contributions are accepted under the same licence, with a Developer Certificate of Origin sign-off on every commit and no CLA: see CONTRIBUTING.md.

Security

Report a vulnerability privately, never in a public issue: see SECURITY.md.

This project follows the Code of Conduct.